enic: set skb->hash type properly

Driver sets the skb l4/l3 hash based on NIC_CFG_RSS_HASH_TYPE_*,
which is bit mask. This is wrong. Hw actually provides us enum.
Use CQ_ENET_RQ_DESC_RSS_TYPE_* to set l3 and l4 hash type.

Fixes: bf751ba802 ("driver/net: enic: record q_number and rss_hash for skb")
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Govindarajulu Varadarajan 2016-11-01 17:58:50 -07:00 committed by David S. Miller
parent f7a5537cd2
commit 17197236d6
2 changed files with 13 additions and 7 deletions

View File

@ -33,7 +33,7 @@
#define DRV_NAME "enic"
#define DRV_DESCRIPTION "Cisco VIC Ethernet NIC Driver"
#define DRV_VERSION "2.3.0.20"
#define DRV_VERSION "2.3.0.31"
#define DRV_COPYRIGHT "Copyright 2008-2013 Cisco Systems, Inc"
#define ENIC_BARS_MAX 6

View File

@ -1166,12 +1166,18 @@ static void enic_rq_indicate_buf(struct vnic_rq *rq,
skb->protocol = eth_type_trans(skb, netdev);
skb_record_rx_queue(skb, q_number);
if (netdev->features & NETIF_F_RXHASH) {
skb_set_hash(skb, rss_hash,
(rss_type &
(NIC_CFG_RSS_HASH_TYPE_TCP_IPV6_EX |
NIC_CFG_RSS_HASH_TYPE_TCP_IPV6 |
NIC_CFG_RSS_HASH_TYPE_TCP_IPV4)) ?
PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3);
switch (rss_type) {
case CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv4:
case CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6:
case CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6_EX:
skb_set_hash(skb, rss_hash, PKT_HASH_TYPE_L4);
break;
case CQ_ENET_RQ_DESC_RSS_TYPE_IPv4:
case CQ_ENET_RQ_DESC_RSS_TYPE_IPv6:
case CQ_ENET_RQ_DESC_RSS_TYPE_IPv6_EX:
skb_set_hash(skb, rss_hash, PKT_HASH_TYPE_L3);
break;
}
}
/* Hardware does not provide whole packet checksum. It only