Merge branch 'spi-mcspi' into spi-next

This commit is contained in:
Mark Brown 2012-11-14 12:16:50 +09:00
commit 170c2d0a87
3 changed files with 8 additions and 8 deletions

View File

@ -6,9 +6,9 @@ Required properties:
- "ti,omap4-spi" for OMAP4+.
- ti,spi-num-cs : Number of chipselect supported by the instance.
- ti,hwmods: Name of the hwmod associated to the McSPI
- ti,pindir-d0-in-d1-out: Select the D0 pin as input and D1 as
output. The default is D0 as output and
D1 as input.
- ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as
input. The default is D0 as input and
D1 as output.
Example:

View File

@ -765,7 +765,7 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
/* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
* REVISIT: this controller could support SPI_3WIRE mode.
*/
if (mcspi->pin_dir == MCSPI_PINDIR_D0_OUT_D1_IN) {
if (mcspi->pin_dir == MCSPI_PINDIR_D0_IN_D1_OUT) {
l &= ~OMAP2_MCSPI_CHCONF_IS;
l &= ~OMAP2_MCSPI_CHCONF_DPE1;
l |= OMAP2_MCSPI_CHCONF_DPE0;
@ -1187,8 +1187,8 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev)
of_property_read_u32(node, "ti,spi-num-cs", &num_cs);
master->num_chipselect = num_cs;
master->bus_num = bus_num++;
if (of_get_property(node, "ti,pindir-d0-in-d1-out", NULL))
mcspi->pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT;
if (of_get_property(node, "ti,pindir-d0-out-d1-in", NULL))
mcspi->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
} else {
pdata = pdev->dev.platform_data;
master->num_chipselect = pdata->num_cs;

View File

@ -7,8 +7,8 @@
#define OMAP4_MCSPI_REG_OFFSET 0x100
#define MCSPI_PINDIR_D0_OUT_D1_IN 0
#define MCSPI_PINDIR_D0_IN_D1_OUT 1
#define MCSPI_PINDIR_D0_IN_D1_OUT 0
#define MCSPI_PINDIR_D0_OUT_D1_IN 1
struct omap2_mcspi_platform_config {
unsigned short num_cs;