From 16e821e3ba47096eb23abedd5a5e377d77f5f0d5 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 27 Jan 2017 22:38:37 +0100 Subject: [PATCH] mmc: sunxi: Mask DATA0 when updating the clock The A64 MMC controllers need DATA0 to be masked while updating the clock, otherwise any subsequent command will result in a timeout. It's not really clear at this point what DATA0 is exactly, but this behaviour is present in Allwinner's tree, and has been suggested by Allwinner engineers as fixes for the timeout. Signed-off-by: Maxime Ripard Tested-by: Florian Vaussard Acked-by: Chen-Yu Tsai Signed-off-by: Ulf Hansson --- drivers/mmc/host/sunxi-mmc.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index 51d6388a194e..6bbe61397b7c 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -101,6 +101,7 @@ (SDXC_SOFT_RESET | SDXC_FIFO_RESET | SDXC_DMA_RESET) /* clock control bits */ +#define SDXC_MASK_DATA0 BIT(31) #define SDXC_CARD_CLOCK_ON BIT(16) #define SDXC_LOW_POWER_ON BIT(17) @@ -254,6 +255,9 @@ struct sunxi_mmc_cfg { /* does the IP block support autocalibration? */ bool can_calibrate; + /* Does DATA0 needs to be masked while the clock is updated */ + bool mask_data0; + bool needs_new_timings; }; @@ -657,10 +661,12 @@ static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en) u32 rval; rval = mmc_readl(host, REG_CLKCR); - rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON); + rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON | SDXC_MASK_DATA0); if (oclk_en) rval |= SDXC_CARD_CLOCK_ON; + if (host->cfg->mask_data0) + rval |= SDXC_MASK_DATA0; mmc_writel(host, REG_CLKCR, rval); @@ -680,6 +686,11 @@ static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en) return -EIO; } + if (host->cfg->mask_data0) { + rval = mmc_readl(host, REG_CLKCR); + mmc_writel(host, REG_CLKCR, rval & ~SDXC_MASK_DATA0); + } + return 0; } @@ -1081,6 +1092,7 @@ static const struct sunxi_mmc_cfg sun50i_a64_cfg = { .idma_des_size_bits = 16, .clk_delays = NULL, .can_calibrate = true, + .mask_data0 = true, .needs_new_timings = true, };