diff --git a/Documentation/kbuild/Kconfig.recursion-issue-01 b/Documentation/kbuild/Kconfig.recursion-issue-01 new file mode 100644 index 000000000000..e8877db0461f --- /dev/null +++ b/Documentation/kbuild/Kconfig.recursion-issue-01 @@ -0,0 +1,57 @@ +# Simple Kconfig recursive issue +# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +# +# Test with: +# +# make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.recursion-issue-01 allnoconfig +# +# This Kconfig file has a simple recursive dependency issue. In order to +# understand why this recursive dependency issue occurs lets consider what +# Kconfig needs to address. We iterate over what Kconfig needs to address +# by stepping through the questions it needs to address sequentially. +# +# * What values are possible for CORE? +# +# CORE_BELL_A_ADVANCED selects CORE, which means that it influences the values +# that are possible for CORE. So for example if CORE_BELL_A_ADVANCED is 'y', +# CORE must be 'y' too. +# +# * What influences CORE_BELL_A_ADVANCED ? +# +# As the name implies CORE_BELL_A_ADVANCED is an advanced feature of +# CORE_BELL_A so naturally it depends on CORE_BELL_A. So if CORE_BELL_A is 'y' +# we know CORE_BELL_A_ADVANCED can be 'y' too. +# +# * What influences CORE_BELL_A ? +# +# CORE_BELL_A depends on CORE, so CORE influences CORE_BELL_A. +# +# But that is a problem, because this means that in order to determine +# what values are possible for CORE we ended up needing to address questions +# regarding possible values of CORE itself again. Answering the original +# question of what are the possible values of CORE would make the kconfig +# tools run in a loop. When this happens Kconfig exits and complains about +# the "recursive dependency detected" error. +# +# Reading the Documentation/kbuild/Kconfig.recursion-issue-01 file it may be +# obvious that an easy to solution to this problem should just be the removal +# of the "select CORE" from CORE_BELL_A_ADVANCED as that is implicit already +# since CORE_BELL_A depends on CORE. Recursive dependency issues are not always +# so trivial to resolve, we provide another example below of practical +# implications of this recursive issue where the solution is perhaps not so +# easy to understand. Note that matching semantics on the dependency on +# CORE also consist of a solution to this recursive problem. + +mainmenu "Simple example to demo kconfig recursive dependency issue" + +config CORE + tristate + +config CORE_BELL_A + tristate + depends on CORE + +config CORE_BELL_A_ADVANCED + tristate + depends on CORE_BELL_A + select CORE diff --git a/Documentation/kbuild/Kconfig.recursion-issue-02 b/Documentation/kbuild/Kconfig.recursion-issue-02 new file mode 100644 index 000000000000..b9fd56c4b57e --- /dev/null +++ b/Documentation/kbuild/Kconfig.recursion-issue-02 @@ -0,0 +1,63 @@ +# Cumulative Kconfig recursive issue +# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +# +# Test with: +# +# make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.recursion-issue-02 allnoconfig +# +# The recursive limitations with Kconfig has some non intuitive implications on +# kconfig sematics which are documented here. One known practical implication +# of the recursive limitation is that drivers cannot negate features from other +# drivers if they share a common core requirement and use disjoint semantics to +# annotate those requirements, ie, some drivers use "depends on" while others +# use "select". For instance it means if a driver A and driver B share the same +# core requirement, and one uses "select" while the other uses "depends on" to +# annotate this, all features that driver A selects cannot now be negated by +# driver B. +# +# A perhaps not so obvious implication of this is that, if semantics on these +# core requirements are not carefully synced, as drivers evolve features +# they select or depend on end up becoming shared requirements which cannot be +# negated by other drivers. +# +# The example provided in Documentation/kbuild/Kconfig.recursion-issue-02 +# describes a simple driver core layout of example features a kernel might +# have. Let's assume we have some CORE functionality, then the kernel has a +# series of bells and whistles it desires to implement, its not so advanced so +# it only supports bells at this time: CORE_BELL_A and CORE_BELL_B. If +# CORE_BELL_A has some advanced feature CORE_BELL_A_ADVANCED which selects +# CORE_BELL_A then CORE_BELL_A ends up becoming a common BELL feature which +# other bells in the system cannot negate. The reason for this issue is +# due to the disjoint use of semantics on expressing each bell's relationship +# with CORE, one uses "depends on" while the other uses "select". Another +# more important reason is that kconfig does not check for dependencies listed +# under 'select' for a symbol, when such symbols are selected kconfig them +# as mandatory required symbols. For more details on the heavy handed nature +# of select refer to Documentation/kbuild/Kconfig.select-break +# +# To fix this the "depends on CORE" must be changed to "select CORE", or the +# "select CORE" must be changed to "depends on CORE". +# +# For an example real world scenario issue refer to the attempt to remove +# "select FW_LOADER" [0], in the end the simple alternative solution to this +# problem consisted on matching semantics with newly introduced features. +# +# [0] http://lkml.kernel.org/r/1432241149-8762-1-git-send-email-mcgrof@do-not-panic.com + +mainmenu "Simple example to demo cumulative kconfig recursive dependency implication" + +config CORE + tristate + +config CORE_BELL_A + tristate + depends on CORE + +config CORE_BELL_A_ADVANCED + tristate + select CORE_BELL_A + +config CORE_BELL_B + tristate + depends on !CORE_BELL_A + select CORE diff --git a/Documentation/kbuild/Kconfig.select-break b/Documentation/kbuild/Kconfig.select-break new file mode 100644 index 000000000000..365ceb3424b1 --- /dev/null +++ b/Documentation/kbuild/Kconfig.select-break @@ -0,0 +1,33 @@ +# Select broken dependency issue +# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +# +# Test with: +# +# make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.select-break menuconfig +# +# kconfig will not complain and enable this layout for configuration. This is +# currently a feature of kconfig, given select was designed to be heavy handed. +# Kconfig currently does not check the list of symbols listed on a symbol's +# "select" list, this is done on purpose to help load a set of known required +# symbols. Because of this use of select should be used with caution. An +# example of this issue is below. +# +# The option B and C are clearly contradicting with respect to A. +# However, when A is set, C can be set as well because Kconfig does not +# visit the dependencies of the select target (in this case B). And since +# Kconfig does not visit the dependencies, it breaks the dependencies of B +# (!A). + +mainmenu "Simple example to demo kconfig select broken dependency issue" + +config A + bool "CONFIG A" + +config B + bool "CONFIG B" + depends on !A + +config C + bool "CONFIG C" + depends on A + select B diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index 350f733bf2c7..c52856da0cad 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -393,3 +393,164 @@ config FOO depends on BAR && m limits FOO to module (=m) or disabled (=n). + +Kconfig recursive dependency limitations +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If you've hit the Kconfig error: "recursive dependency detected" you've run +into a recursive dependency issue with Kconfig, a recursive dependency can be +summarized as a circular dependency. The kconfig tools need to ensure that +Kconfig files comply with specified configuration requirements. In order to do +that kconfig must determine the values that are possible for all Kconfig +symbols, this is currently not possible if there is a circular relation +between two or more Kconfig symbols. For more details refer to the "Simple +Kconfig recursive issue" subsection below. Kconfig does not do recursive +dependency resolution; this has a few implications for Kconfig file writers. +We'll first explain why this issues exists and then provide an example +technical limitation which this brings upon Kconfig developers. Eager +developers wishing to try to address this limitation should read the next +subsections. + +Simple Kconfig recursive issue +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Read: Documentation/kbuild/Kconfig.recursion-issue-01 + +Test with: + +make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.recursion-issue-01 allnoconfig + +Cumulative Kconfig recursive issue +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Read: Documentation/kbuild/Kconfig.recursion-issue-02 + +Test with: + +make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.recursion-issue-02 allnoconfig + +Practical solutions to kconfig recursive issue +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Developers who run into the recursive Kconfig issue have three options +at their disposal. We document them below and also provide a list of +historical issues resolved through these different solutions. + + a) Remove any superfluous "select FOO" or "depends on FOO" + b) Match dependency semantics: + b1) Swap all "select FOO" to "depends on FOO" or, + b2) Swap all "depends on FOO" to "select FOO" + +The resolution to a) can be tested with the sample Kconfig file +Documentation/kbuild/Kconfig.recursion-issue-01 through the removal +of the "select CORE" from CORE_BELL_A_ADVANCED as that is implicit already +since CORE_BELL_A depends on CORE. At times it may not be possible to remove +some dependency criteria, for such cases you can work with solution b). + +The two different resolutions for b) can be tested in the sample Kconfig file +Documentation/kbuild/Kconfig.recursion-issue-02. + +Below is a list of examples of prior fixes for these types of recursive issues; +all errors appear to involve one or more select's and one or more "depends on". + +commit fix +====== === +06b718c01208 select A -> depends on A +c22eacfe82f9 depends on A -> depends on B +6a91e854442c select A -> depends on A +118c565a8f2e select A -> select B +f004e5594705 select A -> depends on A +c7861f37b4c6 depends on A -> (null) +80c69915e5fb select A -> (null) (1) +c2218e26c0d0 select A -> depends on A (1) +d6ae99d04e1c select A -> depends on A +95ca19cf8cbf select A -> depends on A +8f057d7bca54 depends on A -> (null) +8f057d7bca54 depends on A -> select A +a0701f04846e select A -> depends on A +0c8b92f7f259 depends on A -> (null) +e4e9e0540928 select A -> depends on A (2) +7453ea886e87 depends on A > (null) (1) +7b1fff7e4fdf select A -> depends on A +86c747d2a4f0 select A -> depends on A +d9f9ab51e55e select A -> depends on A +0c51a4d8abd6 depends on A -> select A (3) +e98062ed6dc4 select A -> depends on A (3) +91e5d284a7f1 select A -> (null) + +(1) Partial (or no) quote of error. +(2) That seems to be the gist of that fix. +(3) Same error. + +Future kconfig work +~~~~~~~~~~~~~~~~~~~ + +Work on kconfig is welcomed on both areas of clarifying semantics and on +evaluating the use of a full SAT solver for it. A full SAT solver can be +desirable to enable more complex dependency mappings and / or queries, +for instance on possible use case for a SAT solver could be that of handling +the current known recursive dependency issues. It is not known if this would +address such issues but such evaluation is desirable. If support for a full SAT +solver proves too complex or that it cannot address recursive dependency issues +Kconfig should have at least clear and well defined semantics which also +addresses and documents limitations or requirements such as the ones dealing +with recursive dependencies. + +Further work on both of these areas is welcomed on Kconfig. We elaborate +on both of these in the next two subsections. + +Semantics of Kconfig +~~~~~~~~~~~~~~~~~~~~ + +The use of Kconfig is broad, Linux is now only one of Kconfig's users: +one study has completed a broad analysis of Kconfig use in 12 projects [0]. +Despite its widespread use, and although this document does a reasonable job +in documenting basic Kconfig syntax a more precise definition of Kconfig +semantics is welcomed. One project deduced Kconfig semantics through +the use of the xconfig configurator [1]. Work should be done to confirm if +the deduced semantics matches our intended Kconfig design goals. + +Having well defined semantics can be useful for tools for practical +evaluation of depenencies, for instance one such use known case was work to +express in boolean abstraction of the inferred semantics of Kconfig to +translate Kconfig logic into boolean formulas and run a SAT solver on this to +find dead code / features (always inactive), 114 dead features were found in +Linux using this methodology [1] (Section 8: Threats to validity). + +Confirming this could prove useful as Kconfig stands as one of the the leading +industrial variability modeling languages [1] [2]. Its study would help +evaluate practical uses of such languages, their use was only theoretical +and real world requirements were not well understood. As it stands though +only reverse engineering techniques have been used to deduce semantics from +variability modeling languages such as Kconfig [3]. + +[0] http://www.eng.uwaterloo.ca/~shshe/kconfig_semantics.pdf +[1] http://gsd.uwaterloo.ca/sites/default/files/vm-2013-berger.pdf +[2] http://gsd.uwaterloo.ca/sites/default/files/ase241-berger_0.pdf +[3] http://gsd.uwaterloo.ca/sites/default/files/icse2011.pdf + +Full SAT solver for Kconfig +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Although SAT solvers [0] haven't yet been used by Kconfig directly, as noted in +the previous subsection, work has been done however to express in boolean +abstraction the inferred semantics of Kconfig to translate Kconfig logic into +boolean formulas and run a SAT solver on it [1]. Another known related project +is CADOS [2] (former VAMOS [3]) and the tools, mainly undertaker [4], which has +been introduced first with [5]. The basic concept of undertaker is to exract +variability models from Kconfig, and put them together with a propositional +formula extracted from CPP #ifdefs and build-rules into a SAT solver in order +to find dead code, dead files, and dead symbols. If using a SAT solver is +desirable on Kconfig one approach would be to evaluate repurposing such efforts +somehow on Kconfig. There is enough interest from mentors of existing projects +to not only help advise how to integrate this work upstream but also help +maintain it long term. Interested developers should visit: + +http://kernelnewbies.org/KernelProjects/kconfig-sat + +[0] http://www.cs.cornell.edu/~sabhar/chapters/SATSolvers-KR-Handbook.pdf +[1] http://gsd.uwaterloo.ca/sites/default/files/vm-2013-berger.pdf +[2] https://cados.cs.fau.de +[3] https://vamos.cs.fau.de +[4] https://undertaker.cs.fau.de +[5] https://www4.cs.fau.de/Publications/2011/tartler_11_eurosys.pdf diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 3043d6b0b51d..d79cba4ce3eb 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -229,49 +229,21 @@ $(obj)/.tmp_qtcheck: $(src)/Makefile # Qt needs some extra effort... $(obj)/.tmp_qtcheck: - @set -e; $(kecho) " CHECK qt"; dir=""; pkg=""; \ - if ! pkg-config --exists QtCore 2> /dev/null; then \ - echo "* Unable to find the Qt4 tool qmake. Trying to use Qt3"; \ - pkg-config --exists qt 2> /dev/null && pkg=qt; \ - pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ - if [ -n "$$pkg" ]; then \ - cflags="\$$(shell pkg-config $$pkg --cflags)"; \ - libs="\$$(shell pkg-config $$pkg --libs)"; \ - moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ - dir="$$(pkg-config $$pkg --variable=prefix)"; \ - else \ - for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ - if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ - done; \ - if [ -z "$$dir" ]; then \ - echo >&2 "*"; \ - echo >&2 "* Unable to find any Qt installation. Please make sure that"; \ - echo >&2 "* the Qt4 or Qt3 development package is correctly installed and"; \ - echo >&2 "* either qmake can be found or install pkg-config or set"; \ - echo >&2 "* the QTDIR environment variable to the correct location."; \ - echo >&2 "*"; \ - false; \ - fi; \ - libpath=$$dir/lib; lib=qt; osdir=""; \ - $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ - osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ - test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ - test -f $$libpath/libqt-mt.so && lib=qt-mt; \ - cflags="-I$$dir/include"; \ - libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ - moc="$$dir/bin/moc"; \ - fi; \ - if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ - echo "*"; \ - echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ - echo "*"; \ - moc="/usr/bin/moc"; \ - fi; \ + @set -e; $(kecho) " CHECK qt"; \ + if pkg-config --exists Qt5Core; then \ + cflags="-std=c++11 -fPIC `pkg-config --cflags Qt5Core Qt5Gui Qt5Widgets`"; \ + libs=`pkg-config --libs Qt5Core Qt5Gui Qt5Widgets`; \ + moc=`pkg-config --variable=host_bins Qt5Core`/moc; \ + elif pkg-config --exists QtCore; then \ + cflags=`pkg-config --cflags QtCore QtGui`; \ + libs=`pkg-config --libs QtCore QtGui`; \ + moc=`pkg-config --variable=moc_location QtCore`; \ else \ - cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \ - libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \ - moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \ - [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \ + echo >&2 "*"; \ + echo >&2 "* Could not find Qt via pkg-config."; \ + echo >&2 "* Please install either Qt 4.8 or 5.x. and make sure it's in PKG_CONFIG_PATH"; \ + echo >&2 "*"; \ + exit 1; \ fi; \ echo "KC_QT_CFLAGS=$$cflags" > $@; \ echo "KC_QT_LIBS=$$libs" >> $@; \ diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c index 667d1aa23711..cbf4996dd9c1 100644 --- a/scripts/kconfig/expr.c +++ b/scripts/kconfig/expr.c @@ -1113,7 +1113,7 @@ void expr_print(struct expr *e, void (*fn)(void *, struct symbol *, const char * fn(data, e->left.sym, e->left.sym->name); else fn(data, NULL, ""); - fn(data, NULL, e->type == E_LEQ ? ">=" : ">"); + fn(data, NULL, e->type == E_GEQ ? ">=" : ">"); fn(data, e->right.sym, e->right.sym->name); break; case E_UNEQUAL: diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh index 0d883b37882a..67d131447631 100755 --- a/scripts/kconfig/merge_config.sh +++ b/scripts/kconfig/merge_config.sh @@ -32,7 +32,7 @@ usage() { echo " -m only merge the fragments, do not execute the make command" echo " -n use allnoconfig instead of alldefconfig" echo " -r list redundant entries when merging fragments" - echo " -O dir to put generated output files" + echo " -O dir to put generated output files. Consider setting \$KCONFIG_CONFIG instead." } RUNMAKE=true @@ -77,11 +77,19 @@ while true; do esac done -if [ "$#" -lt 2 ] ; then +if [ "$#" -lt 1 ] ; then usage exit fi +if [ -z "$KCONFIG_CONFIG" ]; then + if [ "$OUTPUT" != . ]; then + KCONFIG_CONFIG=$(readlink -m -- "$OUTPUT/.config") + else + KCONFIG_CONFIG=.config + fi +fi + INITFILE=$1 shift; @@ -124,9 +132,9 @@ for MERGE_FILE in $MERGE_LIST ; do done if [ "$RUNMAKE" = "false" ]; then - cp $TMP_FILE $OUTPUT/.config + cp -T -- "$TMP_FILE" "$KCONFIG_CONFIG" echo "#" - echo "# merged configuration written to $OUTPUT/.config (needs make)" + echo "# merged configuration written to $KCONFIG_CONFIG (needs make)" echo "#" clean_up exit @@ -150,7 +158,7 @@ make KCONFIG_ALLCONFIG=$TMP_FILE $OUTPUT_ARG $ALLTARGET for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE) - ACTUAL_VAL=$(grep -w -e "$CFG" $OUTPUT/.config) + ACTUAL_VAL=$(grep -w -e "$CFG" "$KCONFIG_CONFIG") if [ "x$REQUESTED_VAL" != "x$ACTUAL_VAL" ] ; then echo "Value requested for $CFG not in final .config" echo "Requested value: $REQUESTED_VAL" diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc index c3bb7fe8dfa6..91b7e6fbc364 100644 --- a/scripts/kconfig/qconf.cc +++ b/scripts/kconfig/qconf.cc @@ -1,32 +1,17 @@ /* * Copyright (C) 2002 Roman Zippel + * Copyright (C) 2015 Boris Barbulovski * Released under the terms of the GNU GPL v2.0. */ #include -#if QT_VERSION < 0x040000 -#include -#include -#include -#include +#include +#include #include -#include -#include -#include -#include -#include -#else -#include -#include -#include -#include -#include -#include -#include -#include -#include -#endif +#include +#include +#include #include #include @@ -57,7 +42,7 @@ static QApplication *configApp; static ConfigSettings *configSettings; -Q3Action *ConfigMainWindow::saveAction; +QAction *ConfigMainWindow::saveAction; static inline QString qgettext(const char* str) { @@ -66,7 +51,7 @@ static inline QString qgettext(const char* str) static inline QString qgettext(const QString& str) { - return QString::fromLocal8Bit(gettext(str.latin1())); + return QString::fromLocal8Bit(gettext(str.toLatin1())); } ConfigSettings::ConfigSettings() @@ -77,10 +62,10 @@ ConfigSettings::ConfigSettings() /** * Reads a list of integer values from the application settings. */ -Q3ValueList ConfigSettings::readSizes(const QString& key, bool *ok) +QList ConfigSettings::readSizes(const QString& key, bool *ok) { - Q3ValueList result; - QStringList entryList = readListEntry(key, ok); + QList result; + QStringList entryList = value(key).toStringList(); QStringList::Iterator it; for (it = entryList.begin(); it != entryList.end(); ++it) @@ -92,14 +77,16 @@ Q3ValueList ConfigSettings::readSizes(const QString& key, bool *ok) /** * Writes a list of integer values to the application settings. */ -bool ConfigSettings::writeSizes(const QString& key, const Q3ValueList& value) +bool ConfigSettings::writeSizes(const QString& key, const QList& value) { QStringList stringList; - Q3ValueList::ConstIterator it; + QList::ConstIterator it; for (it = value.begin(); it != value.end(); ++it) stringList.push_back(QString::number(*it)); - return writeEntry(key, stringList); + setValue(key, stringList); + + return true; } @@ -109,9 +96,6 @@ bool ConfigSettings::writeSizes(const QString& key, const Q3ValueList& valu */ void ConfigItem::okRename(int col) { - Parent::okRename(col); - sym_set_string_value(menu->sym, text(dataColIdx).latin1()); - listView()->updateList(this); } /* @@ -149,11 +133,11 @@ void ConfigItem::updateMenu(void) } else { if (sym) break; - setPixmap(promptColIdx, 0); + setPixmap(promptColIdx, QIcon()); } goto set_prompt; case P_COMMENT: - setPixmap(promptColIdx, 0); + setPixmap(promptColIdx, QIcon()); goto set_prompt; default: ; @@ -170,7 +154,7 @@ void ConfigItem::updateMenu(void) char ch; if (!sym_is_changable(sym) && list->optMode == normalOpt) { - setPixmap(promptColIdx, 0); + setPixmap(promptColIdx, QIcon()); setText(noColIdx, QString::null); setText(modColIdx, QString::null); setText(yesColIdx, QString::null); @@ -216,9 +200,6 @@ void ConfigItem::updateMenu(void) data = sym_get_string_value(sym); - int i = list->mapIdx(dataColIdx); - if (i >= 0) - setRenameEnabled(i, TRUE); setText(dataColIdx, data); if (type == S_STRING) prompt = QString("%1: %2").arg(prompt).arg(data); @@ -250,18 +231,6 @@ void ConfigItem::testUpdateMenu(bool v) updateMenu(); } -void ConfigItem::paintCell(QPainter* p, const QColorGroup& cg, int column, int width, int align) -{ - ConfigList* list = listView(); - - if (visible) { - if (isSelected() && !list->hasFocus() && list->mode == menuMode) - Parent::paintCell(p, list->inactivedColorGroup, column, width, align); - else - Parent::paintCell(p, cg, column, width, align); - } else - Parent::paintCell(p, list->disabledColorGroup, column, width, align); -} /* * construct a menu entry @@ -274,7 +243,7 @@ void ConfigItem::init(void) menu->data = this; if (list->mode != fullMode) - setOpen(TRUE); + setExpanded(true); sym_calc_value(menu->sym); } updateMenu(); @@ -299,7 +268,7 @@ ConfigItem::~ConfigItem(void) ConfigLineEdit::ConfigLineEdit(ConfigView* parent) : Parent(parent) { - connect(this, SIGNAL(lostFocus()), SLOT(hide())); + connect(this, SIGNAL(editingFinished()), SLOT(hide())); } void ConfigLineEdit::show(ConfigItem* i) @@ -320,7 +289,7 @@ void ConfigLineEdit::keyPressEvent(QKeyEvent* e) break; case Qt::Key_Return: case Qt::Key_Enter: - sym_set_string_value(item->menu->sym, text().latin1()); + sym_set_string_value(item->menu->sym, text().toLatin1()); parent()->updateList(item); break; default: @@ -333,39 +302,39 @@ void ConfigLineEdit::keyPressEvent(QKeyEvent* e) } ConfigList::ConfigList(ConfigView* p, const char *name) - : Parent(p, name), + : Parent(p), updateAll(false), symbolYesPix(xpm_symbol_yes), symbolModPix(xpm_symbol_mod), symbolNoPix(xpm_symbol_no), choiceYesPix(xpm_choice_yes), choiceNoPix(xpm_choice_no), menuPix(xpm_menu), menuInvPix(xpm_menu_inv), menuBackPix(xpm_menuback), voidPix(xpm_void), - showName(false), showRange(false), showData(false), optMode(normalOpt), + showName(false), showRange(false), showData(false), mode(singleMode), optMode(normalOpt), rootEntry(0), headerPopup(0) { int i; - setSorting(-1); - setRootIsDecorated(TRUE); - disabledColorGroup = palette().active(); - disabledColorGroup.setColor(QColorGroup::Text, palette().disabled().text()); - inactivedColorGroup = palette().active(); - inactivedColorGroup.setColor(QColorGroup::Highlight, palette().disabled().highlight()); + setObjectName(name); + setSortingEnabled(false); + setRootIsDecorated(true); - connect(this, SIGNAL(selectionChanged(void)), + setVerticalScrollMode(ScrollPerPixel); + setHorizontalScrollMode(ScrollPerPixel); + + setHeaderLabels(QStringList() << _("Option") << _("Name") << "N" << "M" << "Y" << _("Value")); + + connect(this, SIGNAL(itemSelectionChanged(void)), SLOT(updateSelection(void))); if (name) { configSettings->beginGroup(name); - showName = configSettings->readBoolEntry("/showName", false); - showRange = configSettings->readBoolEntry("/showRange", false); - showData = configSettings->readBoolEntry("/showData", false); - optMode = (enum optionMode)configSettings->readNumEntry("/optionMode", false); + showName = configSettings->value("/showName", false).toBool(); + showRange = configSettings->value("/showRange", false).toBool(); + showData = configSettings->value("/showData", false).toBool(); + optMode = (enum optionMode)configSettings->value("/optionMode", 0).toInt(); configSettings->endGroup(); connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings())); } - for (i = 0; i < colNr; i++) - colMap[i] = colRevMap[i] = -1; - addColumn(promptColIdx, _("Option")); + addColumn(promptColIdx); reinit(); } @@ -390,26 +359,26 @@ void ConfigList::reinit(void) removeColumn(nameColIdx); if (showName) - addColumn(nameColIdx, _("Name")); + addColumn(nameColIdx); if (showRange) { - addColumn(noColIdx, "N"); - addColumn(modColIdx, "M"); - addColumn(yesColIdx, "Y"); + addColumn(noColIdx); + addColumn(modColIdx); + addColumn(yesColIdx); } if (showData) - addColumn(dataColIdx, _("Value")); + addColumn(dataColIdx); updateListAll(); } void ConfigList::saveSettings(void) { - if (name()) { - configSettings->beginGroup(name()); - configSettings->writeEntry("/showName", showName); - configSettings->writeEntry("/showRange", showRange); - configSettings->writeEntry("/showData", showData); - configSettings->writeEntry("/optionMode", (int)optMode); + if (!objectName().isEmpty()) { + configSettings->beginGroup(objectName()); + configSettings->setValue("/showName", showName); + configSettings->setValue("/showRange", showRange); + configSettings->setValue("/showData", showData); + configSettings->setValue("/optionMode", (int)optMode); configSettings->endGroup(); } } @@ -431,7 +400,10 @@ void ConfigList::updateSelection(void) struct menu *menu; enum prop_type type; - ConfigItem* item = (ConfigItem*)selectedItem(); + if (selectedItems().count() == 0) + return; + + ConfigItem* item = (ConfigItem*)selectedItems().first(); if (!item) return; @@ -451,21 +423,23 @@ void ConfigList::updateList(ConfigItem* item) if (!rootEntry) { if (mode != listMode) goto update; - Q3ListViewItemIterator it(this); + QTreeWidgetItemIterator it(this); ConfigItem* item; - for (; it.current(); ++it) { - item = (ConfigItem*)it.current(); + while (*it) { + item = (ConfigItem*)(*it); if (!item->menu) continue; item->testUpdateMenu(menu_is_visible(item->menu)); + + ++it; } return; } if (rootEntry != &rootmenu && (mode == singleMode || (mode == symbolMode && rootEntry->parent != &rootmenu))) { - item = firstChild(); + item = (ConfigItem *)topLevelItem(0); if (!item) item = new ConfigItem(this, 0, true); last = item; @@ -479,12 +453,14 @@ void ConfigList::updateList(ConfigItem* item) item->testUpdateMenu(true); updateMenuList(item, rootEntry); - triggerUpdate(); + update(); + resizeColumnToContents(0); return; } update: updateMenuList(this, rootEntry); - triggerUpdate(); + update(); + resizeColumnToContents(0); } void ConfigList::setValue(ConfigItem* item, tristate val) @@ -506,7 +482,7 @@ void ConfigList::setValue(ConfigItem* item, tristate val) if (!sym_set_tristate_value(sym, val)) return; if (oldval == no && item->menu->list) - item->setOpen(TRUE); + item->setExpanded(true); parent()->updateList(item); break; } @@ -524,7 +500,7 @@ void ConfigList::changeValue(ConfigItem* item) sym = menu->sym; if (!sym) { if (item->menu->list) - item->setOpen(!item->isOpen()); + item->setExpanded(!item->isExpanded()); return; } @@ -536,9 +512,9 @@ void ConfigList::changeValue(ConfigItem* item) newexpr = sym_toggle_tristate_value(sym); if (item->menu->list) { if (oldexpr == newexpr) - item->setOpen(!item->isOpen()); + item->setExpanded(!item->isExpanded()); else if (oldexpr == no) - item->setOpen(TRUE); + item->setExpanded(true); } if (oldexpr != newexpr) parent()->updateList(item); @@ -546,10 +522,7 @@ void ConfigList::changeValue(ConfigItem* item) case S_INT: case S_HEX: case S_STRING: - if (colMap[dataColIdx] >= 0) - item->startRename(colMap[dataColIdx]); - else - parent()->lineEdit->show(item); + parent()->lineEdit->show(item); break; } } @@ -566,8 +539,10 @@ void ConfigList::setRootMenu(struct menu *menu) updateMenuList(this, 0); rootEntry = menu; updateListAll(); - setSelected(currentItem(), hasFocus()); - ensureItemVisible(currentItem()); + if (currentItem()) { + currentItem()->setSelected(hasFocus()); + scrollToItem(currentItem()); + } } void ConfigList::setParentMenu(void) @@ -580,13 +555,16 @@ void ConfigList::setParentMenu(void) return; setRootMenu(menu_get_parent_menu(rootEntry->parent)); - Q3ListViewItemIterator it(this); - for (; (item = (ConfigItem*)it.current()); it++) { + QTreeWidgetItemIterator it(this); + while (*it) { + item = (ConfigItem *)(*it); if (item->menu == oldroot) { setCurrentItem(item); - ensureItemVisible(item); + scrollToItem(item); break; } + + ++it; } } @@ -597,8 +575,7 @@ void ConfigList::setParentMenu(void) * parent: either the menu list widget or a menu entry widget * menu: entry to be updated */ -template -void ConfigList::updateMenuList(P* parent, struct menu* menu) +void ConfigList::updateMenuList(ConfigItem *parent, struct menu* menu) { struct menu* child; ConfigItem* item; @@ -607,8 +584,11 @@ void ConfigList::updateMenuList(P* parent, struct menu* menu) enum prop_type type; if (!menu) { - while ((item = parent->firstChild())) - delete item; + while (parent->childCount() > 0) + { + delete parent->takeChild(0); + } + return; } @@ -660,9 +640,74 @@ void ConfigList::updateMenuList(P* parent, struct menu* menu) } } +void ConfigList::updateMenuList(ConfigList *parent, struct menu* menu) +{ + struct menu* child; + ConfigItem* item; + ConfigItem* last; + bool visible; + enum prop_type type; + + if (!menu) { + while (parent->topLevelItemCount() > 0) + { + delete parent->takeTopLevelItem(0); + } + + return; + } + + last = (ConfigItem*)parent->topLevelItem(0); + if (last && !last->goParent) + last = 0; + for (child = menu->list; child; child = child->next) { + item = last ? last->nextSibling() : (ConfigItem*)parent->topLevelItem(0); + type = child->prompt ? child->prompt->type : P_UNKNOWN; + + switch (mode) { + case menuMode: + if (!(child->flags & MENU_ROOT)) + goto hide; + break; + case symbolMode: + if (child->flags & MENU_ROOT) + goto hide; + break; + default: + break; + } + + visible = menu_is_visible(child); + if (!menuSkip(child)) { + if (!child->sym && !child->list && !child->prompt) + continue; + if (!item || item->menu != child) + item = new ConfigItem(parent, last, child, visible); + else + item->testUpdateMenu(visible); + + if (mode == fullMode || mode == menuMode || type != P_MENU) + updateMenuList(item, child); + else + updateMenuList(item, 0); + last = item; + continue; + } + hide: + if (item && item->menu == child) { + last = (ConfigItem*)parent->topLevelItem(0); + if (last == item) + last = 0; + else while (last->nextSibling() != item) + last = last->nextSibling(); + delete item; + } + } +} + void ConfigList::keyPressEvent(QKeyEvent* ev) { - Q3ListViewItem* i = currentItem(); + QTreeWidgetItem* i = currentItem(); ConfigItem* item; struct menu *menu; enum prop_type type; @@ -714,20 +759,20 @@ void ConfigList::keyPressEvent(QKeyEvent* ev) ev->accept(); } -void ConfigList::contentsMousePressEvent(QMouseEvent* e) +void ConfigList::mousePressEvent(QMouseEvent* e) { //QPoint p(contentsToViewport(e->pos())); //printf("contentsMousePressEvent: %d,%d\n", p.x(), p.y()); - Parent::contentsMousePressEvent(e); + Parent::mousePressEvent(e); } -void ConfigList::contentsMouseReleaseEvent(QMouseEvent* e) +void ConfigList::mouseReleaseEvent(QMouseEvent* e) { - QPoint p(contentsToViewport(e->pos())); + QPoint p = e->pos(); ConfigItem* item = (ConfigItem*)itemAt(p); struct menu *menu; enum prop_type ptype; - const QPixmap* pm; + QIcon icon; int idx, x; if (!item) @@ -735,14 +780,13 @@ void ConfigList::contentsMouseReleaseEvent(QMouseEvent* e) menu = item->menu; x = header()->offset() + p.x(); - idx = colRevMap[header()->sectionAt(x)]; + idx = header()->logicalIndexAt(x); switch (idx) { case promptColIdx: - pm = item->pixmap(promptColIdx); - if (pm) { - int off = header()->sectionPos(0) + itemMargin() + - treeStepSize() * (item->depth() + (rootIsDecorated() ? 1 : 0)); - if (x >= off && x < off + pm->width()) { + icon = item->pixmap(promptColIdx); + if (!icon.isNull()) { + int off = header()->sectionPosition(0) + visualRect(indexAt(p)).x() + 4; // 4 is Hardcoded image offset. There might be a way to do it properly. + if (x >= off && x < off + icon.availableSizes().first().width()) { if (item->goParent) { emit parentSelected(); break; @@ -773,19 +817,19 @@ void ConfigList::contentsMouseReleaseEvent(QMouseEvent* e) skip: //printf("contentsMouseReleaseEvent: %d,%d\n", p.x(), p.y()); - Parent::contentsMouseReleaseEvent(e); + Parent::mouseReleaseEvent(e); } -void ConfigList::contentsMouseMoveEvent(QMouseEvent* e) +void ConfigList::mouseMoveEvent(QMouseEvent* e) { //QPoint p(contentsToViewport(e->pos())); //printf("contentsMouseMoveEvent: %d,%d\n", p.x(), p.y()); - Parent::contentsMouseMoveEvent(e); + Parent::mouseMoveEvent(e); } -void ConfigList::contentsMouseDoubleClickEvent(QMouseEvent* e) +void ConfigList::mouseDoubleClickEvent(QMouseEvent* e) { - QPoint p(contentsToViewport(e->pos())); + QPoint p = e->pos(); // TODO: Check if this works(was contentsToViewport). ConfigItem* item = (ConfigItem*)itemAt(p); struct menu *menu; enum prop_type ptype; @@ -807,7 +851,7 @@ void ConfigList::contentsMouseDoubleClickEvent(QMouseEvent* e) skip: //printf("contentsMouseDoubleClickEvent: %d,%d\n", p.x(), p.y()); - Parent::contentsMouseDoubleClickEvent(e); + Parent::mouseDoubleClickEvent(e); } void ConfigList::focusInEvent(QFocusEvent *e) @@ -818,7 +862,7 @@ void ConfigList::focusInEvent(QFocusEvent *e) ConfigItem* item = (ConfigItem *)currentItem(); if (item) { - setSelected(item, TRUE); + item->setSelected(true); menu = item->menu; } emit gotFocus(menu); @@ -828,33 +872,33 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e) { if (e->y() <= header()->geometry().bottom()) { if (!headerPopup) { - Q3Action *action; + QAction *action; - headerPopup = new Q3PopupMenu(this); - action = new Q3Action(NULL, _("Show Name"), 0, this); - action->setToggleAction(TRUE); + headerPopup = new QMenu(this); + action = new QAction(_("Show Name"), this); + action->setCheckable(true); connect(action, SIGNAL(toggled(bool)), parent(), SLOT(setShowName(bool))); connect(parent(), SIGNAL(showNameChanged(bool)), action, SLOT(setOn(bool))); - action->setOn(showName); - action->addTo(headerPopup); - action = new Q3Action(NULL, _("Show Range"), 0, this); - action->setToggleAction(TRUE); + action->setChecked(showName); + headerPopup->addAction(action); + action = new QAction(_("Show Range"), this); + action->setCheckable(true); connect(action, SIGNAL(toggled(bool)), parent(), SLOT(setShowRange(bool))); connect(parent(), SIGNAL(showRangeChanged(bool)), action, SLOT(setOn(bool))); - action->setOn(showRange); - action->addTo(headerPopup); - action = new Q3Action(NULL, _("Show Data"), 0, this); - action->setToggleAction(TRUE); + action->setChecked(showRange); + headerPopup->addAction(action); + action = new QAction(_("Show Data"), this); + action->setCheckable(true); connect(action, SIGNAL(toggled(bool)), parent(), SLOT(setShowData(bool))); connect(parent(), SIGNAL(showDataChanged(bool)), action, SLOT(setOn(bool))); - action->setOn(showData); - action->addTo(headerPopup); + action->setChecked(showData); + headerPopup->addAction(action); } headerPopup->exec(e->globalPos()); e->accept(); @@ -868,11 +912,17 @@ QAction *ConfigView::showAllAction; QAction *ConfigView::showPromptAction; ConfigView::ConfigView(QWidget* parent, const char *name) - : Parent(parent, name) + : Parent(parent) { - list = new ConfigList(this, name); + setObjectName(name); + QVBoxLayout *verticalLayout = new QVBoxLayout(this); + verticalLayout->setContentsMargins(0, 0, 0, 0); + + list = new ConfigList(this); + verticalLayout->addWidget(list); lineEdit = new ConfigLineEdit(this); lineEdit->hide(); + verticalLayout->addWidget(lineEdit); this->nextView = viewList; viewList = this; @@ -931,10 +981,13 @@ void ConfigView::setShowData(bool b) void ConfigList::setAllOpen(bool open) { - Q3ListViewItemIterator it(this); + QTreeWidgetItemIterator it(this); - for (; it.current(); it++) - it.current()->setOpen(open); + while (*it) { + (*it)->setExpanded(open); + + ++it; + } } void ConfigView::updateList(ConfigItem* item) @@ -954,11 +1007,14 @@ void ConfigView::updateListAll(void) } ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name) - : Parent(parent, name), sym(0), _menu(0) + : Parent(parent), sym(0), _menu(0) { - if (name) { - configSettings->beginGroup(name); - _showDebug = configSettings->readBoolEntry("/showDebug", false); + setObjectName(name); + + + if (!objectName().isEmpty()) { + configSettings->beginGroup(objectName()); + _showDebug = configSettings->value("/showDebug", false).toBool(); configSettings->endGroup(); connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings())); } @@ -966,9 +1022,9 @@ ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name) void ConfigInfoView::saveSettings(void) { - if (name()) { - configSettings->beginGroup(name()); - configSettings->writeEntry("/showDebug", showDebug()); + if (!objectName().isEmpty()) { + configSettings->beginGroup(objectName()); + configSettings->setValue("/showDebug", showDebug()); configSettings->endGroup(); } } @@ -1127,8 +1183,8 @@ QString ConfigInfoView::print_filter(const QString &str) { QRegExp re("[<>&\"\\n]"); QString res = str; - for (int i = 0; (i = res.find(re, i)) >= 0;) { - switch (res[i].latin1()) { + for (int i = 0; (i = res.indexOf(re, i)) >= 0;) { + switch (res[i].toLatin1()) { case '<': res.replace(i, 1, "<"); i += 4; @@ -1167,37 +1223,42 @@ void ConfigInfoView::expr_print_help(void *data, struct symbol *sym, const char *text += str2; } -Q3PopupMenu* ConfigInfoView::createPopupMenu(const QPoint& pos) +QMenu* ConfigInfoView::createStandardContextMenu(const QPoint & pos) { - Q3PopupMenu* popup = Parent::createPopupMenu(pos); - Q3Action* action = new Q3Action(NULL, _("Show Debug Info"), 0, popup); - action->setToggleAction(TRUE); + QMenu* popup = Parent::createStandardContextMenu(pos); + QAction* action = new QAction(_("Show Debug Info"), popup); + action->setCheckable(true); connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool))); connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool))); - action->setOn(showDebug()); - popup->insertSeparator(); - action->addTo(popup); + action->setChecked(showDebug()); + popup->addSeparator(); + popup->addAction(action); return popup; } -void ConfigInfoView::contentsContextMenuEvent(QContextMenuEvent *e) +void ConfigInfoView::contextMenuEvent(QContextMenuEvent *e) { - Parent::contentsContextMenuEvent(e); + Parent::contextMenuEvent(e); } ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *name) - : Parent(parent, name), result(NULL) + : Parent(parent), result(NULL) { - setCaption("Search Config"); + setObjectName(name); + setWindowTitle("Search Config"); - QVBoxLayout* layout1 = new QVBoxLayout(this, 11, 6); - QHBoxLayout* layout2 = new QHBoxLayout(0, 0, 6); + QVBoxLayout* layout1 = new QVBoxLayout(this); + layout1->setContentsMargins(11, 11, 11, 11); + layout1->setSpacing(6); + QHBoxLayout* layout2 = new QHBoxLayout(0); + layout2->setContentsMargins(0, 0, 0, 0); + layout2->setSpacing(6); layout2->addWidget(new QLabel(_("Find:"), this)); editField = new QLineEdit(this); connect(editField, SIGNAL(returnPressed()), SLOT(search())); layout2->addWidget(editField); searchButton = new QPushButton(_("Search"), this); - searchButton->setAutoDefault(FALSE); + searchButton->setAutoDefault(false); connect(searchButton, SIGNAL(clicked()), SLOT(search())); layout2->addWidget(searchButton); layout1->addLayout(layout2); @@ -1215,19 +1276,19 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *nam layout1->addWidget(split); if (name) { - int x, y, width, height; + QVariant x, y; + int width, height; bool ok; configSettings->beginGroup(name); - width = configSettings->readNumEntry("/window width", parent->width() / 2); - height = configSettings->readNumEntry("/window height", parent->height() / 2); + width = configSettings->value("/window width", parent->width() / 2).toInt(); + height = configSettings->value("/window height", parent->height() / 2).toInt(); resize(width, height); - x = configSettings->readNumEntry("/window x", 0, &ok); - if (ok) - y = configSettings->readNumEntry("/window y", 0, &ok); - if (ok) - move(x, y); - Q3ValueList sizes = configSettings->readSizes("/split", &ok); + x = configSettings->value("/window x"); + y = configSettings->value("/window y"); + if ((x.isValid())&&(y.isValid())) + move(x.toInt(), y.toInt()); + QList sizes = configSettings->readSizes("/split", &ok); if (ok) split->setSizes(sizes); configSettings->endGroup(); @@ -1237,12 +1298,12 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *nam void ConfigSearchWindow::saveSettings(void) { - if (name()) { - configSettings->beginGroup(name()); - configSettings->writeEntry("/window x", pos().x()); - configSettings->writeEntry("/window y", pos().y()); - configSettings->writeEntry("/window width", size().width()); - configSettings->writeEntry("/window height", size().height()); + if (!objectName().isEmpty()) { + configSettings->beginGroup(objectName()); + configSettings->setValue("/window x", pos().x()); + configSettings->setValue("/window y", pos().y()); + configSettings->setValue("/window width", size().width()); + configSettings->setValue("/window height", size().height()); configSettings->writeSizes("/split", split->sizes()); configSettings->endGroup(); } @@ -1258,7 +1319,7 @@ void ConfigSearchWindow::search(void) list->list->clear(); info->clear(); - result = sym_re_search(editField->text().latin1()); + result = sym_re_search(editField->text().toLatin1()); if (!result) return; for (p = result; *p; p++) { @@ -1275,29 +1336,25 @@ ConfigMainWindow::ConfigMainWindow(void) : searchWindow(0) { QMenuBar* menu; - bool ok; - int x, y, width, height; + bool ok = true; + QVariant x, y; + int width, height; char title[256]; QDesktopWidget *d = configApp->desktop(); snprintf(title, sizeof(title), "%s%s", rootmenu.prompt->text, -#if QT_VERSION < 0x040000 - " (Qt3)" -#else "" -#endif ); - setCaption(title); + setWindowTitle(title); - width = configSettings->readNumEntry("/window width", d->width() - 64); - height = configSettings->readNumEntry("/window height", d->height() - 64); + width = configSettings->value("/window width", d->width() - 64).toInt(); + height = configSettings->value("/window height", d->height() - 64).toInt(); resize(width, height); - x = configSettings->readNumEntry("/window x", 0, &ok); - if (ok) - y = configSettings->readNumEntry("/window y", 0, &ok); - if (ok) - move(x, y); + x = configSettings->value("/window x"); + y = configSettings->value("/window y"); + if ((x.isValid())&&(y.isValid())) + move(x.toInt(), y.toInt()); split1 = new QSplitter(this); split1->setOrientation(Qt::Horizontal); @@ -1314,127 +1371,115 @@ ConfigMainWindow::ConfigMainWindow(void) configList = configView->list; helpText = new ConfigInfoView(split2, "help"); - helpText->setTextFormat(Qt::RichText); setTabOrder(configList, helpText); configList->setFocus(); menu = menuBar(); - toolBar = new Q3ToolBar("Tools", this); + toolBar = new QToolBar("Tools", this); + addToolBar(toolBar); - backAction = new Q3Action("Back", QPixmap(xpm_back), _("Back"), 0, this); - connect(backAction, SIGNAL(activated()), SLOT(goBack())); - backAction->setEnabled(FALSE); - Q3Action *quitAction = new Q3Action("Quit", _("&Quit"), Qt::CTRL + Qt::Key_Q, this); - connect(quitAction, SIGNAL(activated()), SLOT(close())); - Q3Action *loadAction = new Q3Action("Load", QPixmap(xpm_load), _("&Load"), Qt::CTRL + Qt::Key_L, this); - connect(loadAction, SIGNAL(activated()), SLOT(loadConfig())); - saveAction = new Q3Action("Save", QPixmap(xpm_save), _("&Save"), Qt::CTRL + Qt::Key_S, this); - connect(saveAction, SIGNAL(activated()), SLOT(saveConfig())); + backAction = new QAction(QPixmap(xpm_back), _("Back"), this); + connect(backAction, SIGNAL(triggered(bool)), SLOT(goBack())); + backAction->setEnabled(false); + QAction *quitAction = new QAction(_("&Quit"), this); + quitAction->setShortcut(Qt::CTRL + Qt::Key_Q); + connect(quitAction, SIGNAL(triggered(bool)), SLOT(close())); + QAction *loadAction = new QAction(QPixmap(xpm_load), _("&Load"), this); + loadAction->setShortcut(Qt::CTRL + Qt::Key_L); + connect(loadAction, SIGNAL(triggered(bool)), SLOT(loadConfig())); + saveAction = new QAction(QPixmap(xpm_save), _("&Save"), this); + saveAction->setShortcut(Qt::CTRL + Qt::Key_S); + connect(saveAction, SIGNAL(triggered(bool)), SLOT(saveConfig())); conf_set_changed_callback(conf_changed); // Set saveAction's initial state conf_changed(); - Q3Action *saveAsAction = new Q3Action("Save As...", _("Save &As..."), 0, this); - connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs())); - Q3Action *searchAction = new Q3Action("Find", _("&Find"), Qt::CTRL + Qt::Key_F, this); - connect(searchAction, SIGNAL(activated()), SLOT(searchConfig())); - Q3Action *singleViewAction = new Q3Action("Single View", QPixmap(xpm_single_view), _("Single View"), 0, this); - connect(singleViewAction, SIGNAL(activated()), SLOT(showSingleView())); - Q3Action *splitViewAction = new Q3Action("Split View", QPixmap(xpm_split_view), _("Split View"), 0, this); - connect(splitViewAction, SIGNAL(activated()), SLOT(showSplitView())); - Q3Action *fullViewAction = new Q3Action("Full View", QPixmap(xpm_tree_view), _("Full View"), 0, this); - connect(fullViewAction, SIGNAL(activated()), SLOT(showFullView())); + QAction *saveAsAction = new QAction(_("Save &As..."), this); + connect(saveAsAction, SIGNAL(triggered(bool)), SLOT(saveConfigAs())); + QAction *searchAction = new QAction(_("&Find"), this); + searchAction->setShortcut(Qt::CTRL + Qt::Key_F); + connect(searchAction, SIGNAL(triggered(bool)), SLOT(searchConfig())); + singleViewAction = new QAction(QPixmap(xpm_single_view), _("Single View"), this); + singleViewAction->setCheckable(true); + connect(singleViewAction, SIGNAL(triggered(bool)), SLOT(showSingleView())); + splitViewAction = new QAction(QPixmap(xpm_split_view), _("Split View"), this); + splitViewAction->setCheckable(true); + connect(splitViewAction, SIGNAL(triggered(bool)), SLOT(showSplitView())); + fullViewAction = new QAction(QPixmap(xpm_tree_view), _("Full View"), this); + fullViewAction->setCheckable(true); + connect(fullViewAction, SIGNAL(triggered(bool)), SLOT(showFullView())); - Q3Action *showNameAction = new Q3Action(NULL, _("Show Name"), 0, this); - showNameAction->setToggleAction(TRUE); + QAction *showNameAction = new QAction(_("Show Name"), this); + showNameAction->setCheckable(true); connect(showNameAction, SIGNAL(toggled(bool)), configView, SLOT(setShowName(bool))); - connect(configView, SIGNAL(showNameChanged(bool)), showNameAction, SLOT(setOn(bool))); - showNameAction->setOn(configView->showName()); - Q3Action *showRangeAction = new Q3Action(NULL, _("Show Range"), 0, this); - showRangeAction->setToggleAction(TRUE); + showNameAction->setChecked(configView->showName()); + QAction *showRangeAction = new QAction(_("Show Range"), this); + showRangeAction->setCheckable(true); connect(showRangeAction, SIGNAL(toggled(bool)), configView, SLOT(setShowRange(bool))); - connect(configView, SIGNAL(showRangeChanged(bool)), showRangeAction, SLOT(setOn(bool))); - showRangeAction->setOn(configList->showRange); - Q3Action *showDataAction = new Q3Action(NULL, _("Show Data"), 0, this); - showDataAction->setToggleAction(TRUE); + QAction *showDataAction = new QAction(_("Show Data"), this); + showDataAction->setCheckable(true); connect(showDataAction, SIGNAL(toggled(bool)), configView, SLOT(setShowData(bool))); - connect(configView, SIGNAL(showDataChanged(bool)), showDataAction, SLOT(setOn(bool))); - showDataAction->setOn(configList->showData); QActionGroup *optGroup = new QActionGroup(this); - optGroup->setExclusive(TRUE); - connect(optGroup, SIGNAL(selected(QAction *)), configView, + optGroup->setExclusive(true); + connect(optGroup, SIGNAL(triggered(QAction*)), configView, SLOT(setOptionMode(QAction *))); - connect(optGroup, SIGNAL(selected(QAction *)), menuView, + connect(optGroup, SIGNAL(triggered(QAction *)), menuView, SLOT(setOptionMode(QAction *))); -#if QT_VERSION >= 0x040000 configView->showNormalAction = new QAction(_("Show Normal Options"), optGroup); configView->showAllAction = new QAction(_("Show All Options"), optGroup); configView->showPromptAction = new QAction(_("Show Prompt Options"), optGroup); -#else - configView->showNormalAction = new QAction(_("Show Normal Options"), 0, optGroup); - configView->showAllAction = new QAction(_("Show All Options"), 0, optGroup); - configView->showPromptAction = new QAction(_("Show Prompt Options"), 0, optGroup); -#endif - configView->showNormalAction->setToggleAction(TRUE); - configView->showNormalAction->setOn(configList->optMode == normalOpt); - configView->showAllAction->setToggleAction(TRUE); - configView->showAllAction->setOn(configList->optMode == allOpt); - configView->showPromptAction->setToggleAction(TRUE); - configView->showPromptAction->setOn(configList->optMode == promptOpt); + configView->showNormalAction->setCheckable(true); + configView->showAllAction->setCheckable(true); + configView->showPromptAction->setCheckable(true); - Q3Action *showDebugAction = new Q3Action(NULL, _("Show Debug Info"), 0, this); - showDebugAction->setToggleAction(TRUE); + QAction *showDebugAction = new QAction( _("Show Debug Info"), this); + showDebugAction->setCheckable(true); connect(showDebugAction, SIGNAL(toggled(bool)), helpText, SLOT(setShowDebug(bool))); - connect(helpText, SIGNAL(showDebugChanged(bool)), showDebugAction, SLOT(setOn(bool))); - showDebugAction->setOn(helpText->showDebug()); + showDebugAction->setChecked(helpText->showDebug()); - Q3Action *showIntroAction = new Q3Action(NULL, _("Introduction"), 0, this); - connect(showIntroAction, SIGNAL(activated()), SLOT(showIntro())); - Q3Action *showAboutAction = new Q3Action(NULL, _("About"), 0, this); - connect(showAboutAction, SIGNAL(activated()), SLOT(showAbout())); + QAction *showIntroAction = new QAction( _("Introduction"), this); + connect(showIntroAction, SIGNAL(triggered(bool)), SLOT(showIntro())); + QAction *showAboutAction = new QAction( _("About"), this); + connect(showAboutAction, SIGNAL(triggered(bool)), SLOT(showAbout())); // init tool bar - backAction->addTo(toolBar); + toolBar->addAction(backAction); toolBar->addSeparator(); - loadAction->addTo(toolBar); - saveAction->addTo(toolBar); + toolBar->addAction(loadAction); + toolBar->addAction(saveAction); toolBar->addSeparator(); - singleViewAction->addTo(toolBar); - splitViewAction->addTo(toolBar); - fullViewAction->addTo(toolBar); + toolBar->addAction(singleViewAction); + toolBar->addAction(splitViewAction); + toolBar->addAction(fullViewAction); // create config menu - Q3PopupMenu* config = new Q3PopupMenu(this); - menu->insertItem(_("&File"), config); - loadAction->addTo(config); - saveAction->addTo(config); - saveAsAction->addTo(config); - config->insertSeparator(); - quitAction->addTo(config); + QMenu* config = menu->addMenu(_("&File")); + config->addAction(loadAction); + config->addAction(saveAction); + config->addAction(saveAsAction); + config->addSeparator(); + config->addAction(quitAction); // create edit menu - Q3PopupMenu* editMenu = new Q3PopupMenu(this); - menu->insertItem(_("&Edit"), editMenu); - searchAction->addTo(editMenu); + QMenu* editMenu = menu->addMenu(_("&Edit")); + editMenu->addAction(searchAction); // create options menu - Q3PopupMenu* optionMenu = new Q3PopupMenu(this); - menu->insertItem(_("&Option"), optionMenu); - showNameAction->addTo(optionMenu); - showRangeAction->addTo(optionMenu); - showDataAction->addTo(optionMenu); - optionMenu->insertSeparator(); - optGroup->addTo(optionMenu); - optionMenu->insertSeparator(); + QMenu* optionMenu = menu->addMenu(_("&Option")); + optionMenu->addAction(showNameAction); + optionMenu->addAction(showRangeAction); + optionMenu->addAction(showDataAction); + optionMenu->addSeparator(); + optionMenu->addActions(optGroup->actions()); + optionMenu->addSeparator(); // create help menu - Q3PopupMenu* helpMenu = new Q3PopupMenu(this); - menu->insertSeparator(); - menu->insertItem(_("&Help"), helpMenu); - showIntroAction->addTo(helpMenu); - showAboutAction->addTo(helpMenu); + menu->addSeparator(); + QMenu* helpMenu = menu->addMenu(_("&Help")); + helpMenu->addAction(showIntroAction); + helpMenu->addAction(showAboutAction); connect(configList, SIGNAL(menuChanged(struct menu *)), helpText, SLOT(setInfo(struct menu *))); @@ -1456,7 +1501,7 @@ ConfigMainWindow::ConfigMainWindow(void) connect(helpText, SIGNAL(menuSelected(struct menu *)), SLOT(setMenuLink(struct menu *))); - QString listMode = configSettings->readEntry("/listMode", "symbol"); + QString listMode = configSettings->value("/listMode", "symbol").toString(); if (listMode == "single") showSingleView(); else if (listMode == "full") @@ -1465,7 +1510,7 @@ ConfigMainWindow::ConfigMainWindow(void) showSplitView(); // UI setup done, restore splitter positions - Q3ValueList sizes = configSettings->readSizes("/split1", &ok); + QList sizes = configSettings->readSizes("/split1", &ok); if (ok) split1->setSizes(sizes); @@ -1476,7 +1521,7 @@ ConfigMainWindow::ConfigMainWindow(void) void ConfigMainWindow::loadConfig(void) { - QString s = Q3FileDialog::getOpenFileName(conf_get_configname(), NULL, this); + QString s = QFileDialog::getOpenFileName(this, "", conf_get_configname()); if (s.isNull()) return; if (conf_read(QFile::encodeName(s))) @@ -1495,7 +1540,7 @@ bool ConfigMainWindow::saveConfig(void) void ConfigMainWindow::saveConfigAs(void) { - QString s = Q3FileDialog::getSaveFileName(conf_get_configname(), NULL, this); + QString s = QFileDialog::getSaveFileName(this, "", conf_get_configname()); if (s.isNull()) return; saveConfig(); @@ -1512,9 +1557,9 @@ void ConfigMainWindow::changeMenu(struct menu *menu) { configList->setRootMenu(menu); if (configList->rootEntry->parent == &rootmenu) - backAction->setEnabled(FALSE); + backAction->setEnabled(false); else - backAction->setEnabled(TRUE); + backAction->setEnabled(true); } void ConfigMainWindow::setMenuLink(struct menu *menu) @@ -1546,8 +1591,8 @@ void ConfigMainWindow::setMenuLink(struct menu *menu) return; item = menuList->findConfigItem(parent); if (item) { - menuList->setSelected(item, TRUE); - menuList->ensureItemVisible(item); + item->setSelected(true); + menuList->scrollToItem(item); } list->setRootMenu(parent); } @@ -1562,8 +1607,8 @@ void ConfigMainWindow::setMenuLink(struct menu *menu) if (list) { item = list->findConfigItem(menu); if (item) { - list->setSelected(item, TRUE); - list->ensureItemVisible(item); + item->setSelected(true); + list->scrollToItem(item); list->setFocus(); } } @@ -1577,15 +1622,21 @@ void ConfigMainWindow::listFocusChanged(void) void ConfigMainWindow::goBack(void) { - ConfigItem* item; + ConfigItem* item, *oldSelection; configList->setParentMenu(); if (configList->rootEntry == &rootmenu) - backAction->setEnabled(FALSE); - item = (ConfigItem*)menuList->selectedItem(); + backAction->setEnabled(false); + + if (menuList->selectedItems().count() == 0) + return; + + item = (ConfigItem*)menuList->selectedItems().first(); + oldSelection = item; while (item) { if (item->menu == configList->rootEntry) { - menuList->setSelected(item, TRUE); + oldSelection->setSelected(false); + item->setSelected(true); break; } item = (ConfigItem*)item->parent(); @@ -1594,6 +1645,13 @@ void ConfigMainWindow::goBack(void) void ConfigMainWindow::showSingleView(void) { + singleViewAction->setEnabled(false); + singleViewAction->setChecked(true); + splitViewAction->setEnabled(true); + splitViewAction->setChecked(false); + fullViewAction->setEnabled(true); + fullViewAction->setChecked(false); + menuView->hide(); menuList->setRootMenu(0); configList->mode = singleMode; @@ -1601,28 +1659,41 @@ void ConfigMainWindow::showSingleView(void) configList->updateListAll(); else configList->setRootMenu(&rootmenu); - configList->setAllOpen(TRUE); configList->setFocus(); } void ConfigMainWindow::showSplitView(void) { + singleViewAction->setEnabled(true); + singleViewAction->setChecked(false); + splitViewAction->setEnabled(false); + splitViewAction->setChecked(true); + fullViewAction->setEnabled(true); + fullViewAction->setChecked(false); + configList->mode = symbolMode; if (configList->rootEntry == &rootmenu) configList->updateListAll(); else configList->setRootMenu(&rootmenu); - configList->setAllOpen(TRUE); + configList->setAllOpen(true); configApp->processEvents(); menuList->mode = menuMode; menuList->setRootMenu(&rootmenu); - menuList->setAllOpen(TRUE); + menuList->setAllOpen(true); menuView->show(); menuList->setFocus(); } void ConfigMainWindow::showFullView(void) { + singleViewAction->setEnabled(true); + singleViewAction->setChecked(false); + splitViewAction->setEnabled(true); + splitViewAction->setChecked(false); + fullViewAction->setEnabled(false); + fullViewAction->setChecked(true); + menuView->hide(); menuList->setRootMenu(0); configList->mode = fullMode; @@ -1630,7 +1701,6 @@ void ConfigMainWindow::showFullView(void) configList->updateListAll(); else configList->setRootMenu(&rootmenu); - configList->setAllOpen(FALSE); configList->setFocus(); } @@ -1684,7 +1754,8 @@ void ConfigMainWindow::showIntro(void) void ConfigMainWindow::showAbout(void) { - static const QString str = _("qconf is Copyright (C) 2002 Roman Zippel .\n\n" + static const QString str = _("qconf is Copyright (C) 2002 Roman Zippel .\n" + "Copyright (C) 2015 Boris Barbulovski .\n\n" "Bug reports and feature request can also be entered at http://bugzilla.kernel.org/\n"); QMessageBox::information(this, "qconf", str); @@ -1692,10 +1763,10 @@ void ConfigMainWindow::showAbout(void) void ConfigMainWindow::saveSettings(void) { - configSettings->writeEntry("/window x", pos().x()); - configSettings->writeEntry("/window y", pos().y()); - configSettings->writeEntry("/window width", size().width()); - configSettings->writeEntry("/window height", size().height()); + configSettings->setValue("/window x", pos().x()); + configSettings->setValue("/window y", pos().y()); + configSettings->setValue("/window width", size().width()); + configSettings->setValue("/window height", size().height()); QString entry; switch(configList->mode) { @@ -1714,7 +1785,7 @@ void ConfigMainWindow::saveSettings(void) default: break; } - configSettings->writeEntry("/listMode", entry); + configSettings->setValue("/listMode", entry); configSettings->writeSizes("/split1", split1->sizes()); configSettings->writeSizes("/split2", split2->sizes()); @@ -1746,7 +1817,7 @@ static const char *progname; static void usage(void) { - printf(_("%s [-s] \n"), progname); + printf(_("%s [-s] \n").toLatin1().constData(), progname); exit(0); } @@ -1785,7 +1856,6 @@ int main(int ac, char** av) v = new ConfigMainWindow(); //zconfdump(stdout); - configApp->setMainWidget(v); configApp->connect(configApp, SIGNAL(lastWindowClosed()), SLOT(quit())); configApp->connect(configApp, SIGNAL(aboutToQuit()), v, SLOT(saveSettings())); v->show(); diff --git a/scripts/kconfig/qconf.h b/scripts/kconfig/qconf.h index bde0c6b6f9e8..a40036d1b059 100644 --- a/scripts/kconfig/qconf.h +++ b/scripts/kconfig/qconf.h @@ -3,26 +3,18 @@ * Released under the terms of the GNU GPL v2.0. */ -#if QT_VERSION < 0x040000 -#include -#else -#include -#endif +#include +#include +#include +#include #include - -#if QT_VERSION < 0x040000 -#define Q3ValueList QValueList -#define Q3PopupMenu QPopupMenu -#define Q3ListView QListView -#define Q3ListViewItem QListViewItem -#define Q3VBox QVBox -#define Q3TextBrowser QTextBrowser -#define Q3MainWindow QMainWindow -#define Q3Action QAction -#define Q3ToolBar QToolBar -#define Q3ListViewItemIterator QListViewItemIterator -#define Q3FileDialog QFileDialog -#endif +#include +#include +#include +#include +#include +#include +#include "expr.h" class ConfigView; class ConfigList; @@ -33,8 +25,8 @@ class ConfigMainWindow; class ConfigSettings : public QSettings { public: ConfigSettings(); - Q3ValueList readSizes(const QString& key, bool *ok); - bool writeSizes(const QString& key, const Q3ValueList& value); + QList readSizes(const QString& key, bool *ok); + bool writeSizes(const QString& key, const QList& value); }; enum colIdx { @@ -47,9 +39,9 @@ enum optionMode { normalOpt = 0, allOpt, promptOpt }; -class ConfigList : public Q3ListView { +class ConfigList : public QTreeWidget { Q_OBJECT - typedef class Q3ListView Parent; + typedef class QTreeWidget Parent; public: ConfigList(ConfigView* p, const char *name = 0); void reinit(void); @@ -61,10 +53,10 @@ public: protected: void keyPressEvent(QKeyEvent *e); - void contentsMousePressEvent(QMouseEvent *e); - void contentsMouseReleaseEvent(QMouseEvent *e); - void contentsMouseMoveEvent(QMouseEvent *e); - void contentsMouseDoubleClickEvent(QMouseEvent *e); + void mousePressEvent(QMouseEvent *e); + void mouseReleaseEvent(QMouseEvent *e); + void mouseMoveEvent(QMouseEvent *e); + void mouseDoubleClickEvent(QMouseEvent *e); void focusInEvent(QFocusEvent *e); void contextMenuEvent(QContextMenuEvent *e); @@ -95,32 +87,23 @@ public: } ConfigItem* firstChild() const { - return (ConfigItem *)Parent::firstChild(); + return (ConfigItem *)children().first(); } - int mapIdx(colIdx idx) + void addColumn(colIdx idx) { - return colMap[idx]; - } - void addColumn(colIdx idx, const QString& label) - { - colMap[idx] = Parent::addColumn(label); - colRevMap[colMap[idx]] = idx; + showColumn(idx); } void removeColumn(colIdx idx) { - int col = colMap[idx]; - if (col >= 0) { - Parent::removeColumn(col); - colRevMap[col] = colMap[idx] = -1; - } + hideColumn(idx); } void setAllOpen(bool open); void setParentMenu(void); bool menuSkip(struct menu *); - template - void updateMenuList(P*, struct menu*); + void updateMenuList(ConfigItem *parent, struct menu*); + void updateMenuList(ConfigList *parent, struct menu*); bool updateAll; @@ -132,30 +115,26 @@ public: enum listMode mode; enum optionMode optMode; struct menu *rootEntry; - QColorGroup disabledColorGroup; - QColorGroup inactivedColorGroup; - Q3PopupMenu* headerPopup; - -private: - int colMap[colNr]; - int colRevMap[colNr]; + QPalette disabledColorGroup; + QPalette inactivedColorGroup; + QMenu* headerPopup; }; -class ConfigItem : public Q3ListViewItem { - typedef class Q3ListViewItem Parent; +class ConfigItem : public QTreeWidgetItem { + typedef class QTreeWidgetItem Parent; public: - ConfigItem(Q3ListView *parent, ConfigItem *after, struct menu *m, bool v) - : Parent(parent, after), menu(m), visible(v), goParent(false) + ConfigItem(ConfigList *parent, ConfigItem *after, struct menu *m, bool v) + : Parent(parent, after), nextItem(0), menu(m), visible(v), goParent(false) { init(); } ConfigItem(ConfigItem *parent, ConfigItem *after, struct menu *m, bool v) - : Parent(parent, after), menu(m), visible(v), goParent(false) + : Parent(parent, after), nextItem(0), menu(m), visible(v), goParent(false) { init(); } - ConfigItem(Q3ListView *parent, ConfigItem *after, bool v) - : Parent(parent, after), menu(0), visible(v), goParent(true) + ConfigItem(ConfigList *parent, ConfigItem *after, bool v) + : Parent(parent, after), nextItem(0), menu(0), visible(v), goParent(true) { init(); } @@ -166,33 +145,43 @@ public: void testUpdateMenu(bool v); ConfigList* listView() const { - return (ConfigList*)Parent::listView(); + return (ConfigList*)Parent::treeWidget(); } ConfigItem* firstChild() const { - return (ConfigItem *)Parent::firstChild(); + return (ConfigItem *)Parent::child(0); } - ConfigItem* nextSibling() const + ConfigItem* nextSibling() { - return (ConfigItem *)Parent::nextSibling(); + ConfigItem *ret = NULL; + ConfigItem *_parent = (ConfigItem *)parent(); + + if(_parent) { + ret = (ConfigItem *)_parent->child(_parent->indexOfChild(this)+1); + } else { + QTreeWidget *_treeWidget = treeWidget(); + ret = (ConfigItem *)_treeWidget->topLevelItem(_treeWidget->indexOfTopLevelItem(this)+1); + } + + return ret; } void setText(colIdx idx, const QString& text) { - Parent::setText(listView()->mapIdx(idx), text); + Parent::setText(idx, text); } QString text(colIdx idx) const { - return Parent::text(listView()->mapIdx(idx)); + return Parent::text(idx); } - void setPixmap(colIdx idx, const QPixmap& pm) + void setPixmap(colIdx idx, const QIcon &icon) { - Parent::setPixmap(listView()->mapIdx(idx), pm); + Parent::setIcon(idx, icon); } - const QPixmap* pixmap(colIdx idx) const + const QIcon pixmap(colIdx idx) const { - return Parent::pixmap(listView()->mapIdx(idx)); + return icon(idx); } - void paintCell(QPainter* p, const QColorGroup& cg, int column, int width, int align); + // TODO: Implement paintCell ConfigItem* nextItem; struct menu *menu; @@ -216,9 +205,9 @@ public: ConfigItem *item; }; -class ConfigView : public Q3VBox { +class ConfigView : public QWidget { Q_OBJECT - typedef class Q3VBox Parent; + typedef class QWidget Parent; public: ConfigView(QWidget* parent, const char *name = 0); ~ConfigView(void); @@ -249,9 +238,9 @@ public: static QAction *showPromptAction; }; -class ConfigInfoView : public Q3TextBrowser { +class ConfigInfoView : public QTextBrowser { Q_OBJECT - typedef class Q3TextBrowser Parent; + typedef class QTextBrowser Parent; public: ConfigInfoView(QWidget* parent, const char *name = 0); bool showDebug(void) const { return _showDebug; } @@ -271,8 +260,8 @@ protected: QString debug_info(struct symbol *sym); static QString print_filter(const QString &str); static void expr_print_help(void *data, struct symbol *sym, const char *str); - Q3PopupMenu* createPopupMenu(const QPoint& pos); - void contentsContextMenuEvent(QContextMenuEvent *e); + QMenu *createStandardContextMenu(const QPoint & pos); + void contextMenuEvent(QContextMenuEvent *e); struct symbol *sym; struct menu *_menu; @@ -299,10 +288,10 @@ protected: struct symbol **result; }; -class ConfigMainWindow : public Q3MainWindow { +class ConfigMainWindow : public QMainWindow { Q_OBJECT - static Q3Action *saveAction; + static QAction *saveAction; static void conf_changed(void); public: ConfigMainWindow(void); @@ -331,8 +320,11 @@ protected: ConfigView *configView; ConfigList *configList; ConfigInfoView *helpText; - Q3ToolBar *toolBar; - Q3Action *backAction; - QSplitter* split1; - QSplitter* split2; + QToolBar *toolBar; + QAction *backAction; + QAction *singleViewAction; + QAction *splitViewAction; + QAction *fullViewAction; + QSplitter *split1; + QSplitter *split2; }; diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c index 50878dc025a5..25cf0c2c0c79 100644 --- a/scripts/kconfig/symbol.c +++ b/scripts/kconfig/symbol.c @@ -1116,6 +1116,8 @@ static void sym_check_print_recursive(struct symbol *last_sym) if (stack->sym == last_sym) fprintf(stderr, "%s:%d:error: recursive dependency detected!\n", prop->file->name, prop->lineno); + fprintf(stderr, "For a resolution refer to Documentation/kbuild/kconfig-language.txt\n"); + fprintf(stderr, "subsection \"Kconfig recursive dependency limitations\"\n"); if (stack->expr) { fprintf(stderr, "%s:%d:\tsymbol %s %s value contains %s\n", prop->file->name, prop->lineno,