mmc: core: Export a function mmc_sw_reset() to allow soft reset of cards

It's rather common that a firmware is loaded into an SDIO func device
memory, by the corresponding SDIO func driver during ->probe() time.

However, to actually start running the new firmware, sometimes a soft reset
(no power cycle) and a re-initialization of the card is needed. This is for
example the case with the Espressif ESP8089 WiFi chips, when connected to
an SDIO interface.

To cope with this scenario, let's add a new exported function,
mmc_sw_reset(), which may be called when a soft reset and re-initialization
of the card are needed.

The mmc_sw_reset() is implemented on top of a new bus ops callback, similar
to how the mmc_hw_reset() has been implemented.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
This commit is contained in:
Ulf Hansson 2018-04-05 13:42:00 +02:00
parent 3a3db6030b
commit 1433269c4d
3 changed files with 26 additions and 0 deletions

View File

@ -2451,6 +2451,30 @@ int mmc_hw_reset(struct mmc_host *host)
}
EXPORT_SYMBOL(mmc_hw_reset);
int mmc_sw_reset(struct mmc_host *host)
{
int ret;
if (!host->card)
return -EINVAL;
mmc_bus_get(host);
if (!host->bus_ops || host->bus_dead || !host->bus_ops->sw_reset) {
mmc_bus_put(host);
return -EOPNOTSUPP;
}
ret = host->bus_ops->sw_reset(host);
mmc_bus_put(host);
if (ret)
pr_warn("%s: tried to SW reset card, got error %d\n",
mmc_hostname(host), ret);
return ret;
}
EXPORT_SYMBOL(mmc_sw_reset);
static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
{
host->f_init = freq;

View File

@ -33,6 +33,7 @@ struct mmc_bus_ops {
int (*alive)(struct mmc_host *);
int (*shutdown)(struct mmc_host *);
int (*hw_reset)(struct mmc_host *);
int (*sw_reset)(struct mmc_host *);
};
void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops);

View File

@ -177,6 +177,7 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd,
int retries);
int mmc_hw_reset(struct mmc_host *host);
int mmc_sw_reset(struct mmc_host *host);
void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card);
#endif /* LINUX_MMC_CORE_H */