drm/i915: track is_dual_link in intel_lvds

Yeah, all users (both the clock selection special cases and the lvds
pin pair stuff) are still in common code, but this will change.

v2: Rebase on top of Jani Nikula's panel rework.

v3: Incorporate review from Paulo Zanoni:
- s/__is_dual_link_lvds/compute_is_dual_link_lvds
- kill dev_priv->lvds_val
- drop spurious whitespace change

v4: Add a debug printk to display the dual-link status, as suggested
by Paulo Zanoni in review.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v3)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
Daniel Vetter 2012-11-26 17:22:10 +01:00
parent 1974cad0ee
commit 13c7d87031
2 changed files with 31 additions and 14 deletions

View File

@ -705,7 +705,6 @@ typedef struct drm_i915_private {
unsigned int display_clock_mode:1;
int lvds_ssc_freq;
unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
unsigned int lvds_val; /* used for checking LVDS channel mode */
struct {
int rate;
int lanes;

View File

@ -52,6 +52,7 @@ struct intel_lvds_encoder {
u32 pfit_control;
u32 pfit_pgm_ratios;
bool pfit_dirty;
bool is_dual_link;
struct intel_lvds_connector *attached_connector;
};
@ -922,6 +923,23 @@ static const struct dmi_system_id intel_dual_link_lvds[] = {
};
bool intel_is_dual_link_lvds(struct drm_device *dev)
{
struct intel_encoder *encoder;
struct intel_lvds_encoder *lvds_encoder;
list_for_each_entry(encoder, &dev->mode_config.encoder_list,
base.head) {
if (encoder->type == INTEL_OUTPUT_LVDS) {
lvds_encoder = to_lvds_encoder(&encoder->base);
return lvds_encoder->is_dual_link;
}
}
return false;
}
static bool compute_is_dual_link_lvds(struct drm_device *dev)
{
unsigned int val;
struct drm_i915_private *dev_priv = dev->dev_private;
@ -940,19 +958,15 @@ bool intel_is_dual_link_lvds(struct drm_device *dev)
if (dmi_check_system(intel_dual_link_lvds))
return true;
if (dev_priv->lvds_val)
val = dev_priv->lvds_val;
else {
/* BIOS should set the proper LVDS register value at boot, but
* in reality, it doesn't set the value when the lid is closed;
* we need to check "the value to be set" in VBT when LVDS
* register is uninitialized.
*/
val = I915_READ(lvds_reg);
if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
val = dev_priv->bios_lvds_val;
dev_priv->lvds_val = val;
}
/* BIOS should set the proper LVDS register value at boot, but
* in reality, it doesn't set the value when the lid is closed;
* we need to check "the value to be set" in VBT when LVDS
* register is uninitialized.
*/
val = I915_READ(lvds_reg);
if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
val = dev_priv->bios_lvds_val;
return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
}
@ -1162,6 +1176,10 @@ bool intel_lvds_init(struct drm_device *dev)
goto failed;
out:
lvds_encoder->is_dual_link = compute_is_dual_link_lvds(dev);
DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
lvds_encoder->is_dual_link ? "dual" : "single");
/*
* Unlock registers and just
* leave them unlocked