diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index 9c5d19ac935c..17c1042b2df8 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -13,6 +13,8 @@ Required properties: Optional properties: - atmel,use-dma-rx: use of PDC or DMA for receiving data - atmel,use-dma-tx: use of PDC or DMA for transmitting data +- rts-gpios: specify a GPIO for RTS line. It will use specified PIO instead of the peripheral + function pin for the USART RTS feature. If unsure, don't specify this property. - add dma bindings for dma transfer: - dmas: DMA specifier, consisting of a phandle to DMA controller node, memory peripheral interface and USART DMA channel ID, FIFO configuration. @@ -33,6 +35,7 @@ Example: clock-names = "usart"; atmel,use-dma-rx; atmel,use-dma-tx; + rts-gpios = <&pioD 15 0>; }; - use DMA: diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index 83f2aa83899c..f6fcc67ef06e 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -12,12 +12,6 @@ #ifndef _ASMARM_TIMEX_H #define _ASMARM_TIMEX_H -#ifdef CONFIG_ARCH_MULTIPLATFORM -#define CLOCK_TICK_RATE 1000000 -#else -#include -#endif - typedef unsigned long cycles_t; #define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index e47f5fd232f5..787bb50a4dff 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "at91_aic.h" #include "soc.h" diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 3ebc9792560c..f3f19f21352a 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "board.h" #include "generic.h" @@ -922,6 +923,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -960,6 +962,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -987,9 +990,10 @@ static inline void configure_usart0_pins(unsigned pins) if (pins & ATMEL_UART_RTS) { /* * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. - * We need to drive the pin manually. Default is off (RTS is active low). + * We need to drive the pin manually. The serial driver will driver + * this to high when initializing. */ - at91_set_gpio_output(AT91_PIN_PA21, 1); + uart0_data.rts_gpio = AT91_PIN_PA21; } } @@ -1009,6 +1013,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1060,6 +1065,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1103,6 +1109,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index bc7b363a3083..7fd13aef9827 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -31,6 +31,7 @@ #include #include +#include static unsigned long last_crtr; static u32 irqmask; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 6c821e562159..c3d22be73b7c 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index eda8d1679d40..2ae7715f1309 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -25,6 +25,7 @@ #include #include #include +#include #include "board.h" #include "generic.h" @@ -819,6 +820,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -857,6 +859,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -908,6 +911,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -951,6 +955,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -994,6 +999,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); @@ -1037,6 +1043,7 @@ static struct resource uart4_resources[] = { static struct atmel_uart_data uart4_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart4_dmamask = DMA_BIT_MASK(32); @@ -1075,6 +1082,7 @@ static struct resource uart5_resources[] = { static struct atmel_uart_data uart5_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart5_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 6276b4c1acfe..48b51f796d6a 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index b2a34740146a..80e35895d28f 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -25,6 +25,7 @@ #include #include #include +#include #include "board.h" #include "generic.h" @@ -880,6 +881,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -918,6 +920,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -961,6 +964,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1004,6 +1008,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 37b90f4b990c..486530c3973b 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 4aeadddbc181..43d53d6156dd 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "board.h" #include "generic.h" @@ -1324,6 +1325,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1362,6 +1364,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1405,6 +1408,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1448,6 +1452,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 0f04ffe9c5a8..0a9e2fc8f796 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -19,6 +19,7 @@ #include #include +#include #define AT91_PIT_MR 0x00 /* Mode Register */ #define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 2f455ce35268..8c11696f606e 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "at91_aic.h" #include "soc.h" diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index cb36fa872d30..77b04c2edd78 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -32,6 +32,7 @@ #include #include #include +#include #include @@ -1587,6 +1588,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1625,6 +1627,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1668,6 +1671,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1711,6 +1715,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1754,6 +1759,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 3651517abedf..c0d5474706f8 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "at91_aic.h" #include "at91_rstc.h" diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index a698bdab2cce..428fc412aaf1 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include "board.h" @@ -956,6 +957,7 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ + .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -994,6 +996,7 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1045,6 +1048,7 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1088,6 +1092,7 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1131,6 +1136,7 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, + .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index bad94b84a46f..7523f1cdfe1d 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include "at91_aic.h" #include "generic.h" diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index c0e637adf65d..07d0bf2ac2da 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include "at91_tc.h" diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index c1d61d247790..416bae8435ee 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -31,6 +31,7 @@ #include #include +#include #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 65c0d6b5ecba..5f25fa54eb93 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -30,6 +30,7 @@ #include #include +#include #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 869cbecf00b7..e4a5ac17cdbc 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -26,6 +26,7 @@ #include #include +#include #include "at91_aic.h" #include "board.h" diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index 90680217064e..38dca2bb027f 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -55,4 +55,6 @@ #define AT91_PS_CR (AT91_PS + 0) /* PS Control register */ #define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */ +#define AT91X40_MASTER_CLOCK 40000000 + #endif /* AT91X40_H */ diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h deleted file mode 100644 index 5e917a66edd7..000000000000 --- a/arch/arm/mach-at91/include/mach/timex.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/timex.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include - -#ifdef CONFIG_ARCH_AT91X40 - -#define AT91X40_MASTER_CLOCK 40000000 -#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) - -#else - -#define CLOCK_TICK_RATE 12345678 - -#endif - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 590b52dea9f7..8bda1cefdf96 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -27,6 +27,7 @@ #include #include +#include #include "at91_aic.h" #include "generic.h" diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h deleted file mode 100644 index de6fd192d1c3..000000000000 --- a/arch/arm/mach-clps711x/include/mach/timex.h +++ /dev/null @@ -1,2 +0,0 @@ -/* Bogus value */ -#define CLOCK_TICK_RATE 512000 diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h deleted file mode 100644 index 9b885298f106..000000000000 --- a/arch/arm/mach-davinci/include/mach/timex.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * DaVinci timer defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz, - * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/ - * linux/jiffies.h) are not used directly in code. Currently none of the - * code relevant to DaVinci platform depends on these values directly. - */ -#define CLOCK_TICK_RATE 27000000 - -#endif /* __ASM_ARCH_TIMEX_H__ */ diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h deleted file mode 100644 index 251d538541db..000000000000 --- a/arch/arm/mach-dove/include/mach/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h deleted file mode 100644 index 4fb43b22a102..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-ebsa110/include/mach/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA110 architecture timex specifications - */ - -/* - * On the EBSA, the clock ticks at weird rates. - * This is therefore not used to calculate the - * divisor. - */ -#define CLOCK_TICK_RATE 47894000 - diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 157ba88433c9..6c705472da6c 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -117,7 +117,7 @@ void __init ep93xx_map_io(void) #define EP93XX_TIMER4_CLOCK 983040 #define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1) -#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ) +#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ) static unsigned int last_jiffy_time; diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h deleted file mode 100644 index 6b3503b01fa6..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/timex.h - */ - -#define CLOCK_TICK_RATE 983040 diff --git a/arch/arm/mach-exynos/include/mach/timex.h b/arch/arm/mach-exynos/include/mach/timex.h deleted file mode 100644 index 6d138750a708..000000000000 --- a/arch/arm/mach-exynos/include/mach/timex.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/timex.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks - * - * Based on arch/arm/mach-s5p6442/include/mach/timex.h - * - * EXYNOS4 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h deleted file mode 100644 index d0fea9d6d4ab..000000000000 --- a/arch/arm/mach-footbridge/include/mach/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/mach-footbridge/include/mach/timex.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA285 architecture timex specifications - */ - -/* - * We assume a constant here; this satisfies the maths in linux/timex.h - * and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but - * this must be a constant. - */ -#define CLOCK_TICK_RATE (50000000/16) diff --git a/arch/arm/mach-gemini/include/mach/timex.h b/arch/arm/mach-gemini/include/mach/timex.h deleted file mode 100644 index dc5690ba975c..000000000000 --- a/arch/arm/mach-gemini/include/mach/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * Gemini timex specifications - * - * Copyright (C) 2008-2009 Paulius Zaleckas - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* When AHB bus frequency is 150MHz */ -#define CLOCK_TICK_RATE 38000000 diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h deleted file mode 100644 index 1dcb42028c82..000000000000 --- a/arch/arm/mach-integrator/include/mach/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/timex.h - * - * Integrator architecture timex specifications - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * ?? - */ -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h deleted file mode 100644 index 45fb2745bb54..000000000000 --- a/arch/arm/mach-iop13xx/include/mach/timex.h +++ /dev/null @@ -1 +0,0 @@ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h deleted file mode 100644 index 7262ab81419d..000000000000 --- a/arch/arm/mach-iop32x/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -/* - * arch/arm/mach-iop32x/include/mach/timex.h - * - * IOP32x architecture timex specifications - */ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h deleted file mode 100644 index 54c589091d6e..000000000000 --- a/arch/arm/mach-iop33x/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -/* - * arch/arm/mach-iop33x/include/mach/timex.h - * - * IOP3xx architecture timex specifications - */ -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 6d68aed6548a..dc5d7a0e5d9c 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -45,6 +44,17 @@ #include #include +#define IXP4XX_TIMER_FREQ 66666000 + +/* + * The timer register doesn't allow to specify the two least significant bits of + * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is + * the best value with the two least significant bits unset. + */ +#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \ + (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \ + (IXP4XX_OST_RELOAD_MASK + 1) + static void __init ixp4xx_clocksource_init(void); static void __init ixp4xx_clockevent_init(void); static struct clock_event_device clockevent_ixp4xx; @@ -520,7 +530,7 @@ static void ixp4xx_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK; + osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK; opts = IXP4XX_OST_ENABLE; break; case CLOCK_EVT_MODE_ONESHOT: diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h deleted file mode 100644 index 0396d89f947c..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/timex.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/timex.h - * - */ - -#include - -/* - * We use IXP425 General purpose timer for our timer needs, it runs at - * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the - * timer register ignores the bottom 2 bits of the LATCH value. - */ -#define IXP4XX_TIMER_FREQ 66666000 -#define CLOCK_TICK_RATE \ - (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) - diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h deleted file mode 100644 index c923cd169b9c..000000000000 --- a/arch/arm/mach-kirkwood/include/mach/timex.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-kirkwood/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h deleted file mode 100644 index 10f716371bd3..000000000000 --- a/arch/arm/mach-ks8695/include/mach/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/timex.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks - * - * KS8695 - Time Parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include - -#define CLOCK_TICK_RATE KS8695_CLOCK_RATE - -#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h deleted file mode 100644 index 8d4066b16b3f..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/timex.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/timex.h - * - * Author: Kevin Wells - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * Rate in Hz of the main system oscillator. This value should match - * the value 'MAIN_OSC_FREQ' in platform.h - */ -#define CLOCK_TICK_RATE 13000000 - -#endif diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h deleted file mode 100644 index 70c9f1d88c02..000000000000 --- a/arch/arm/mach-mmp/include/mach/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/arch/arm/mach-mmp/include/mach/timex.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifdef CONFIG_CPU_MMP2 -#define CLOCK_TICK_RATE 6500000 -#else -#define CLOCK_TICK_RATE 3250000 -#endif diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 024022d91fe3..048997e75dd0 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -39,6 +39,12 @@ #include "clock.h" +#ifdef CONFIG_CPU_MMP2 +#define MMP_CLOCK_FREQ 6500000 +#else +#define MMP_CLOCK_FREQ 3250000 +#endif + #define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE #define MAX_DELTA (0xfffffffe) @@ -195,14 +201,14 @@ void __init timer_init(int irq) { timer_config(); - sched_clock_register(mmp_read_sched_clock, 32, CLOCK_TICK_RATE); + sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ); ckevt.cpumask = cpumask_of(0); setup_irq(irq, &timer_irq); - clocksource_register_hz(&cksrc, CLOCK_TICK_RATE); - clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE, + clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ); + clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ, MIN_DELTA, MAX_DELTA); } diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h deleted file mode 100644 index a62e6b215aec..000000000000 --- a/arch/arm/mach-msm/include/mach/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-msm/include/mach/timex.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_TIMEX_H -#define __ASM_ARCH_MSM_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h deleted file mode 100644 index 0e8c443c723a..000000000000 --- a/arch/arm/mach-mv78xx0/include/mach/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h deleted file mode 100644 index 1120dd0ba393..000000000000 --- a/arch/arm/mach-netx/include/mach/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-netx/include/mach/timex.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE 100000000 diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 6df42e643031..e2346013e227 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -28,6 +28,9 @@ #include #include +#define NETX_CLOCK_FREQ 100000000 +#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ) + #define TIMER_CLOCKEVENT 0 #define TIMER_CLOCKSOURCE 1 @@ -41,7 +44,7 @@ static void netx_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - writel(LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); + writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); tmode = NETX_GPIO_COUNTER_CTRL_RST_EN | NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN; @@ -114,7 +117,7 @@ void __init netx_timer_init(void) /* Reset the timer value to zero */ writel(0, NETX_GPIO_COUNTER_CURRENT(0)); - writel(LATCH, NETX_GPIO_COUNTER_MAX(0)); + writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0)); /* acknowledge interrupt */ writel(COUNTER_BIT(0), NETX_GPIO_IRQ); @@ -137,11 +140,11 @@ void __init netx_timer_init(void) NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE)); clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE), - "netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up); + "netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up); /* with max_delta_ns >= delta2ns(0x800) the system currently runs fine. * Adding some safety ... */ netx_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE, + clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ, 0xa00, 0xfffffffe); } diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h deleted file mode 100644 index 4793790d53cc..000000000000 --- a/arch/arm/mach-omap1/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/timex.h - */ - -#include diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h deleted file mode 100644 index de9f8fc40e7c..000000000000 --- a/arch/arm/mach-omap2/include/mach/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/timex.h - */ - -#include diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h deleted file mode 100644 index 4c69820e0810..000000000000 --- a/arch/arm/mach-orion5x/include/mach/timex.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-orion5x/include/mach/timex.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h deleted file mode 100644 index af6760a50e1a..000000000000 --- a/arch/arm/mach-pxa/include/mach/timex.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/timex.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* Various drivers are still using the constant of CLOCK_TICK_RATE, for - * those drivers to at least work, the definition is provided here. - * - * NOTE: this is no longer accurate when multiple processors and boards - * are selected, newer drivers should not depend on this any more. Use - * either the clocksource/clockevent or get this at run-time by calling - * get_clock_tick_rate() (as defined in generic.c). - */ - -#if defined(CONFIG_PXA25x) -/* PXA250/210 timer base */ -#define CLOCK_TICK_RATE 3686400 -#elif defined(CONFIG_PXA27x) -/* PXA27x timer base */ -#ifdef CONFIG_MACH_MAINSTONE -#define CLOCK_TICK_RATE 3249600 -#else -#define CLOCK_TICK_RATE 3250000 -#endif -#else -#define CLOCK_TICK_RATE 3250000 -#endif diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h deleted file mode 100644 index 4eeb069373c2..000000000000 --- a/arch/arm/mach-realview/include/mach/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/timex.h - * - * RealView architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h deleted file mode 100644 index dd75e7387bbe..000000000000 --- a/arch/arm/mach-rpc/include/mach/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-rpc/include/mach/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * RiscPC architecture timex specifications - */ - -/* - * On the RiscPC, the clock ticks at 2MHz. - */ -#define CLOCK_TICK_RATE 2000000 - diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c index 9a6def14df01..99363ae5cac7 100644 --- a/arch/arm/mach-rpc/time.c +++ b/arch/arm/mach-rpc/time.c @@ -24,6 +24,9 @@ #include +#define RPC_CLOCK_FREQ 2000000 +#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ) + static u32 ioc_timer_gettimeoffset(void) { unsigned int count1, count2, status; @@ -46,23 +49,23 @@ static u32 ioc_timer_gettimeoffset(void) * and count2. */ if (status & (1 << 5)) - offset -= LATCH; + offset -= RPC_LATCH; } else if (count2 > count1) { /* * We have just had another interrupt between reading * count1 and count2. */ - offset -= LATCH; + offset -= RPC_LATCH; } - offset = (LATCH - offset) * (tick_nsec / 1000); - return ((offset + LATCH/2) / LATCH) * 1000; + offset = (RPC_LATCH - offset) * (tick_nsec / 1000); + return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000; } void __init ioctime_init(void) { - ioc_writeb(LATCH & 255, IOC_T0LTCHL); - ioc_writeb(LATCH >> 8, IOC_T0LTCHH); + ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL); + ioc_writeb(RPC_LATCH >> 8, IOC_T0LTCHH); ioc_writeb(0, IOC_T0GO); } diff --git a/arch/arm/mach-s3c24xx/include/mach/timex.h b/arch/arm/mach-s3c24xx/include/mach/timex.h deleted file mode 100644 index fe9ca1ffd51b..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * S3C2410 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h deleted file mode 100644 index fb2e8cd40829..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c64xx/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * S3C6400 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h deleted file mode 100644 index 4b91faa195a8..000000000000 --- a/arch/arm/mach-s5p64x0/include/mach/timex.h +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * S5P64X0 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h deleted file mode 100644 index 47ffb17aff96..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * S3C6400 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h deleted file mode 100644 index 73dc85496a83..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/timex.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/timex.h - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s5p6442/include/mach/timex.h - * - * S5PV210 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H __FILE__ - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h deleted file mode 100644 index 7a5d017b58b3..000000000000 --- a/arch/arm/mach-sa1100/include/mach/timex.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * arch/arm/mach-sa1100/include/mach/timex.h - * - * SA1100 architecture timex specifications - * - * Copyright (C) 1998 - */ - -/* - * SA1100 timer - */ -#define CLOCK_TICK_RATE 3686400 diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 6fd4acb8f187..7aaac005e036 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -9,6 +9,7 @@ * */ #include +#include #include #include #include @@ -20,6 +21,9 @@ #include #include +#define SA1100_CLOCK_FREQ 3686400 +#define SA1100_LATCH DIV_ROUND_CLOSEST(SA1100_CLOCK_FREQ, HZ) + static u64 notrace sa1100_read_sched_clock(void) { return readl_relaxed(OSCR); @@ -93,7 +97,7 @@ static void sa1100_timer_resume(struct clock_event_device *cedev) /* * OSMR0 is the system timer: make sure OSCR is sufficiently behind */ - writel_relaxed(OSMR0 - LATCH, OSCR); + writel_relaxed(OSMR0 - SA1100_LATCH, OSCR); } #else #define sa1100_timer_suspend NULL @@ -128,7 +132,7 @@ void __init sa1100_timer_init(void) setup_irq(IRQ_OST0, &sa1100_timer_irq); - clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32, + clocksource_mmio_init(OSCR, "oscr", SA1100_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up); clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400, MIN_OSCR_DELTA * 2, 0x7fffffff); diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h deleted file mode 100644 index ae0d8d825c23..000000000000 --- a/arch/arm/mach-shmobile/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_MACH_TIMEX_H -#define __ASM_MACH_TIMEX_H - -#define CLOCK_TICK_RATE 1193180 /* unused i8253 PIT value */ - -#endif /* __ASM_MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear/include/mach/timex.h b/arch/arm/mach-spear/include/mach/timex.h deleted file mode 100644 index ef95e5b780bd..000000000000 --- a/arch/arm/mach-spear/include/mach/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/timex.h - * - * SPEAr platform specific timex definitions - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_TIMEX_H -#define __PLAT_TIMEX_H - -#define CLOCK_TICK_RATE 48000000 - -#endif /* __PLAT_TIMEX_H */ diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h deleted file mode 100644 index 426199b1add5..000000000000 --- a/arch/arm/mach-versatile/include/mach/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/arm/mach-versatile/include/mach/timex.h - * - * Versatile architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-w90x900/include/mach/timex.h b/arch/arm/mach-w90x900/include/mach/timex.h deleted file mode 100644 index 164dce0b64db..000000000000 --- a/arch/arm/mach-w90x900/include/mach/timex.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-w90x900/include/mach/timex.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * Wan ZongShun - * - * Based on arch/arm/mach-s3c2410/include/mach/timex.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE Now, I don't use it. */ - -#define CLOCK_TICK_RATE 15000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/plat-omap/include/plat/timex.h b/arch/arm/plat-omap/include/plat/timex.h deleted file mode 100644 index e27d2daa7790..000000000000 --- a/arch/arm/plat-omap/include/plat/timex.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/timex.h - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#if !defined(__ASM_ARCH_OMAP_TIMEX_H) -#define __ASM_ARCH_OMAP_TIMEX_H - -#define CLOCK_TICK_RATE (HZ * 100000UL) - -#endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c index 09a17d9a6594..b52e1c078b99 100644 --- a/drivers/clocksource/timer-marco.c +++ b/drivers/clocksource/timer-marco.c @@ -19,7 +19,8 @@ #include #include #include -#include + +#define MARCO_CLOCK_FREQ 1000000 #define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000 #define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004 @@ -191,7 +192,7 @@ static int sirfsoc_local_timer_setup(struct clock_event_device *ce) ce->rating = 200; ce->set_mode = sirfsoc_timer_set_mode; ce->set_next_event = sirfsoc_timer_set_next_event; - clockevents_calc_mult_shift(ce, CLOCK_TICK_RATE, 60); + clockevents_calc_mult_shift(ce, MARCO_CLOCK_FREQ, 60); ce->max_delta_ns = clockevent_delta2ns(-2, ce); ce->min_delta_ns = clockevent_delta2ns(2, ce); ce->cpumask = cpumask_of(cpu); @@ -263,11 +264,11 @@ static void __init sirfsoc_marco_timer_init(void) BUG_ON(IS_ERR(clk)); rate = clk_get_rate(clk); - BUG_ON(rate < CLOCK_TICK_RATE); - BUG_ON(rate % CLOCK_TICK_RATE); + BUG_ON(rate < MARCO_CLOCK_FREQ); + BUG_ON(rate % MARCO_CLOCK_FREQ); /* Initialize the timer dividers */ - timer_div = rate / CLOCK_TICK_RATE - 1; + timer_div = rate / MARCO_CLOCK_FREQ - 1; writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL); writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL); @@ -283,7 +284,7 @@ static void __init sirfsoc_marco_timer_init(void) /* Clear all interrupts */ writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); + BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, MARCO_CLOCK_FREQ)); sirfsoc_clockevent_init(); } diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c index 8a492d34ff9f..1a6b2d6356d6 100644 --- a/drivers/clocksource/timer-prima2.c +++ b/drivers/clocksource/timer-prima2.c @@ -21,6 +21,8 @@ #include #include +#define PRIMA2_CLOCK_FREQ 1000000 + #define SIRFSOC_TIMER_COUNTER_LO 0x0000 #define SIRFSOC_TIMER_COUNTER_HI 0x0004 #define SIRFSOC_TIMER_MATCH_0 0x0008 @@ -173,7 +175,7 @@ static u64 notrace sirfsoc_read_sched_clock(void) static void __init sirfsoc_clockevent_init(void) { sirfsoc_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE, + clockevents_config_and_register(&sirfsoc_clockevent, PRIMA2_CLOCK_FREQ, 2, -2); } @@ -190,8 +192,8 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) rate = clk_get_rate(clk); - BUG_ON(rate < CLOCK_TICK_RATE); - BUG_ON(rate % CLOCK_TICK_RATE); + BUG_ON(rate < PRIMA2_CLOCK_FREQ); + BUG_ON(rate % PRIMA2_CLOCK_FREQ); sirfsoc_timer_base = of_iomap(np, 0); if (!sirfsoc_timer_base) @@ -199,14 +201,16 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0); - writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV); + writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1, + sirfsoc_timer_base + SIRFSOC_TIMER_DIV); writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); + BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, + PRIMA2_CLOCK_FREQ)); - sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE); + sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ); BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c index 17ccba88d636..ed8e5e8449d3 100644 --- a/drivers/input/misc/ixp4xx-beeper.c +++ b/drivers/input/misc/ixp4xx-beeper.c @@ -67,7 +67,7 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned } if (value > 20 && value < 32767) - count = (IXP4XX_TIMER_FREQ / (value * 4)) - 1; + count = (ixp4xx_timer_freq / (value * 4)) - 1; ixp4xx_spkr_control(pin, count); diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 309b8b342d9c..596374304532 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -24,7 +24,7 @@ #include #include - +#include /* * This driver uses two configurable hardware resources that live in the diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c index a355f2b82bb8..cccbf9d89729 100644 --- a/drivers/rtc/rtc-pxa.c +++ b/drivers/rtc/rtc-pxa.c @@ -32,7 +32,6 @@ #include -#define TIMER_FREQ CLOCK_TICK_RATE #define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 #define MAXFREQ_PERIODIC 1000 diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index a49f10d269b2..91c0d8839570 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -35,21 +35,18 @@ #include #include #include +#include #include #include #include #include #include #include +#include #include #include -#ifdef CONFIG_ARM -#include -#include -#endif - #define PDC_BUFFER_SIZE 512 /* Revisit: We should calculate this based on the actual port settings */ #define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ @@ -168,6 +165,7 @@ struct atmel_uart_port { struct circ_buf rx_ring; struct serial_rs485 rs485; /* rs485 settings */ + int rts_gpio; /* optional RTS GPIO */ unsigned int tx_done_mask; bool is_usart; /* usart or uart */ struct timer_list uart_timer; /* uart timer */ @@ -301,20 +299,16 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) unsigned int mode; struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); -#ifdef CONFIG_ARCH_AT91RM9200 - if (cpu_is_at91rm9200()) { - /* - * AT91RM9200 Errata #39: RTS0 is not internally connected - * to PA21. We need to drive the pin manually. - */ - if (port->mapbase == AT91RM9200_BASE_US0) { - if (mctrl & TIOCM_RTS) - at91_set_gpio_value(AT91_PIN_PA21, 0); - else - at91_set_gpio_value(AT91_PIN_PA21, 1); - } + /* + * AT91RM9200 Errata #39: RTS0 is not internally connected + * to PA21. We need to drive the pin as a GPIO. + */ + if (gpio_is_valid(atmel_port->rts_gpio)) { + if (mctrl & TIOCM_RTS) + gpio_set_value(atmel_port->rts_gpio, 0); + else + gpio_set_value(atmel_port->rts_gpio, 1); } -#endif if (mctrl & TIOCM_RTS) control |= ATMEL_US_RTSEN; @@ -2389,6 +2383,25 @@ static int atmel_serial_probe(struct platform_device *pdev) port = &atmel_ports[ret]; port->backup_imr = 0; port->uart.line = ret; + port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */ + if (pdata) + port->rts_gpio = pdata->rts_gpio; + else if (np) + port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0); + + if (gpio_is_valid(port->rts_gpio)) { + ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS"); + if (ret) { + dev_err(&pdev->dev, "error requesting RTS GPIO\n"); + goto err; + } + /* Default to 1 as RTS is active low */ + ret = gpio_direction_output(port->rts_gpio, 1); + if (ret) { + dev_err(&pdev->dev, "error setting up RTS GPIO\n"); + goto err; + } + } ret = atmel_init_port(port, pdev); if (ret) diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index cea9f70133c5..e26b0c14edea 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -84,6 +84,7 @@ struct atmel_uart_data { short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virt. base address, if any */ struct serial_rs485 rs485; /* rs485 settings */ + int rts_gpio; /* optional RTS GPIO */ }; /* Touchscreen Controller */