dt-bindings: stm32: convert dfsdm to json-schema

Convert the STM32 DFSDM bindings to DT schema format
using json-schema.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Olivier Moysan 2020-01-23 09:34:31 +01:00 committed by Rob Herring
parent af1c2d8169
commit 11183ac07a
2 changed files with 332 additions and 135 deletions

View File

@ -1,135 +0,0 @@
STMicroelectronics STM32 DFSDM ADC device driver
STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
interface external sigma delta modulators to STM32 micro controllers.
It is mainly targeted for:
- Sigma delta modulators (motor control, metering...)
- PDM microphones (audio digital microphone)
It features up to 8 serial digital interfaces (SPI or Manchester) and
up to 4 filters on stm32h7 or 6 filters on stm32mp1.
Each child node match with a filter instance.
Contents of a STM32 DFSDM root node:
------------------------------------
Required properties:
- compatible: Should be one of:
"st,stm32h7-dfsdm"
"st,stm32mp1-dfsdm"
- reg: Offset and length of the DFSDM block register set.
- clocks: IP and serial interfaces clocking. Should be set according
to rcc clock ID and "clock-names".
- clock-names: Input clock name "dfsdm" must be defined,
"audio" is optional. If defined CLKOUT is based on the audio
clock, else "dfsdm" is used.
- #interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
Optional properties:
- spi-max-frequency: Requested only for SPI master mode.
SPI clock OUT frequency (Hz). This clock must be set according
to "clock" property. Frequency must be a multiple of the rcc
clock frequency. If not, SPI CLKOUT frequency will not be
accurate.
- pinctrl-names: Set to "default".
- pinctrl-0: List of phandles pointing to pin configuration
nodes to set pins in mode of operation for dfsdm
on external pin.
Contents of a STM32 DFSDM child nodes:
--------------------------------------
Required properties:
- compatible: Must be:
"st,stm32-dfsdm-adc" for sigma delta ADCs
"st,stm32-dfsdm-dmic" for audio digital microphone.
- reg: Specifies the DFSDM filter instance used.
Valid values are from 0 to 3 on stm32h7, 0 to 5 on stm32mp1.
- interrupts: IRQ lines connected to each DFSDM filter instance.
- st,adc-channels: List of single-ended channels muxed for this ADC.
valid values:
"st,stm32h7-dfsdm" compatibility: 0 to 7.
- st,adc-channel-names: List of single-ended channel names.
- st,filter-order: SinC filter order from 0 to 5.
0: FastSinC
[1-5]: order 1 to 5.
For audio purpose it is recommended to use order 3 to 5.
- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
Required properties for "st,stm32-dfsdm-adc" compatibility:
- io-channels: From common IIO binding. Used to pipe external sigma delta
modulator or internal ADC output to DFSDM channel.
This is not required for "st,stm32-dfsdm-pdm" compatibility as
PDM microphone is binded in Audio DT node.
Required properties for "st,stm32-dfsdm-pdm" compatibility:
- #sound-dai-cells: Must be set to 0.
- dma: DMA controller phandle and DMA request line associated to the
filter instance (specified by the field "reg")
- dma-names: Must be "rx"
Optional properties:
- st,adc-channel-types: Single-ended channel input type.
- "SPI_R": SPI with data on rising edge (default)
- "SPI_F": SPI with data on falling edge
- "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
- "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
- st,adc-channel-clk-src: Conversion clock source.
- "CLKIN": external SPI clock (CLKIN x)
- "CLKOUT": internal SPI clock (CLKOUT) (default)
- "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
- "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
- st,adc-alt-channel: Must be defined if two sigma delta modulator are
connected on same SPI input.
If not set, channel n is connected to SPI input n.
If set, channel n is connected to SPI input n + 1.
- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0.
Used for multi microphones synchronization.
Example of a sigma delta adc connected on DFSDM SPI port 0
and a pdm microphone connected on DFSDM SPI port 1:
ads1202: simple_sd_adc@0 {
compatible = "ads1202";
#io-channel-cells = <1>;
};
dfsdm: dfsdm@40017000 {
compatible = "st,stm32h7-dfsdm";
reg = <0x40017000 0x400>;
clocks = <&rcc DFSDM1_CK>;
clock-names = "dfsdm";
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
dfsdm_adc0: filter@0 {
compatible = "st,stm32-dfsdm-adc";
#io-channel-cells = <1>;
reg = <0>;
interrupts = <110>;
st,adc-channels = <0>;
st,adc-channel-names = "sd_adc0";
st,adc-channel-types = "SPI_F";
st,adc-channel-clk-src = "CLKOUT";
io-channels = <&ads1202 0>;
st,filter-order = <3>;
};
dfsdm_pdm1: filter@1 {
compatible = "st,stm32-dfsdm-dmic";
reg = <1>;
interrupts = <111>;
dmas = <&dmamux1 102 0x400 0x00>;
dma-names = "rx";
st,adc-channels = <1>;
st,adc-channel-names = "dmic1";
st,adc-channel-types = "SPI_R";
st,adc-channel-clk-src = "CLKOUT";
st,filter-order = <5>;
};
}

View File

@ -0,0 +1,332 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/st,stm32-dfsdm-adc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics STM32 DFSDM ADC device driver
maintainers:
- Fabrice Gasnier <fabrice.gasnier@st.com>
- Olivier Moysan <olivier.moysan@st.com>
description: |
STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
interface external sigma delta modulators to STM32 micro controllers.
It is mainly targeted for:
- Sigma delta modulators (motor control, metering...)
- PDM microphones (audio digital microphone)
It features up to 8 serial digital interfaces (SPI or Manchester) and
up to 4 filters on stm32h7 or 6 filters on stm32mp1.
Each child node matches with a filter instance.
properties:
compatible:
enum:
- st,stm32h7-dfsdm
- st,stm32mp1-dfsdm
reg:
maxItems: 1
clocks:
items:
- description:
Internal clock used for DFSDM digital processing and control blocks.
dfsdm clock can also feed CLKOUT, when CLKOUT is used.
- description: audio clock can be used as an alternate to feed CLKOUT.
minItems: 1
maxItems: 2
clock-names:
items:
- const: dfsdm
- const: audio
minItems: 1
maxItems: 2
"#address-cells":
const: 1
"#size-cells":
const: 0
spi-max-frequency:
description:
SPI clock OUT frequency (Hz). Requested only for SPI master mode.
This clock must be set according to the "clock" property.
Frequency must be a multiple of the rcc clock frequency.
If not, SPI CLKOUT frequency will not be accurate.
maximum: 20000000
required:
- compatible
- reg
- clocks
- clock-names
- "#address-cells"
- "#size-cells"
patternProperties:
"^filter@[0-9]+$":
type: object
description: child node
properties:
compatible:
enum:
- st,stm32-dfsdm-adc
- st,stm32-dfsdm-dmic
reg:
description: Specifies the DFSDM filter instance used.
maxItems: 1
interrupts:
maxItems: 1
st,adc-channels:
description: |
List of single-ended channels muxed for this ADC.
On stm32h7 and stm32mp1:
- For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
- For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
minimum: 0
maximum: 7
st,adc-channel-names:
description: List of single-ended channel names.
allOf:
- $ref: /schemas/types.yaml#/definitions/string-array
st,filter-order:
description: |
SinC filter order from 0 to 5.
- 0: FastSinC
- [1-5]: order 1 to 5.
For audio purpose it is recommended to use order 3 to 5.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- items:
minimum: 0
maximum: 5
"#io-channel-cells":
const: 1
st,adc-channel-types:
description: |
Single-ended channel input type.
- "SPI_R": SPI with data on rising edge (default)
- "SPI_F": SPI with data on falling edge
- "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
- "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
items:
enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
allOf:
- $ref: /schemas/types.yaml#/definitions/non-unique-string-array
st,adc-channel-clk-src:
description: |
Conversion clock source.
- "CLKIN": external SPI clock (CLKIN x)
- "CLKOUT": internal SPI clock (CLKOUT) (default)
- "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
- "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
items:
enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
allOf:
- $ref: /schemas/types.yaml#/definitions/non-unique-string-array
st,adc-alt-channel:
description:
Must be defined if two sigma delta modulators are
connected on same SPI input.
If not set, channel n is connected to SPI input n.
If set, channel n is connected to SPI input n + 1.
type: boolean
st,filter0-sync:
description:
Set to 1 to synchronize with DFSDM filter instance 0.
Used for multi microphones synchronization.
type: boolean
dmas:
maxItems: 1
dma-names:
items:
- const: rx
required:
- compatible
- reg
- interrupts
- st,adc-channels
- st,adc-channel-names
- st,filter-order
- "#io-channel-cells"
allOf:
- if:
properties:
compatible:
contains:
const: st,stm32-dfsdm-adc
- then:
properties:
st,adc-channels:
minItems: 1
maxItems: 8
st,adc-channel-names:
minItems: 1
maxItems: 8
st,adc-channel-types:
minItems: 1
maxItems: 8
st,adc-channel-clk-src:
minItems: 1
maxItems: 8
io-channels:
description:
From common IIO binding. Used to pipe external sigma delta
modulator or internal ADC output to DFSDM channel.
This is not required for "st,stm32-dfsdm-pdm" compatibility as
PDM microphone is binded in Audio DT node.
required:
- io-channels
- if:
properties:
compatible:
contains:
const: st,stm32-dfsdm-dmic
- then:
properties:
st,adc-channels:
maxItems: 1
st,adc-channel-names:
maxItems: 1
st,adc-channel-types:
maxItems: 1
st,adc-channel-clk-src:
maxItems: 1
required:
- dmas
- dma-names
patternProperties:
"^dfsdm-dai+$":
type: object
description: child node
properties:
"#sound-dai-cells":
const: 0
io-channels:
description:
From common IIO binding. Used to pipe external sigma delta
modulator or internal ADC output to DFSDM channel.
required:
- "#sound-dai-cells"
- io-channels
allOf:
- if:
properties:
compatible:
contains:
const: st,stm32h7-dfsdm
- then:
patternProperties:
"^filter@[0-9]+$":
properties:
reg:
items:
minimum: 0
maximum: 3
- if:
properties:
compatible:
contains:
const: st,stm32mp1-dfsdm
- then:
patternProperties:
"^filter@[0-9]+$":
properties:
reg:
items:
minimum: 0
maximum: 5
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
dfsdm: dfsdm@4400d000 {
compatible = "st,stm32mp1-dfsdm";
reg = <0x4400d000 0x800>;
clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>;
clock-names = "dfsdm", "audio";
#address-cells = <1>;
#size-cells = <0>;
dfsdm0: filter@0 {
compatible = "st,stm32-dfsdm-dmic";
reg = <0>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmamux1 101 0x400 0x01>;
dma-names = "rx";
#io-channel-cells = <1>;
st,adc-channels = <1>;
st,adc-channel-names = "dmic0";
st,adc-channel-types = "SPI_R";
st,adc-channel-clk-src = "CLKOUT";
st,filter-order = <5>;
asoc_pdm0: dfsdm-dai {
compatible = "st,stm32h7-dfsdm-dai";
#sound-dai-cells = <0>;
io-channels = <&dfsdm0 0>;
};
};
dfsdm_pdm1: filter@1 {
compatible = "st,stm32-dfsdm-adc";
reg = <1>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmamux1 102 0x400 0x01>;
dma-names = "rx";
#io-channel-cells = <1>;
st,adc-channels = <2 3>;
st,adc-channel-names = "in2", "in3";
st,adc-channel-types = "SPI_R", "SPI_R";
st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F";
io-channels = <&sd_adc2 &sd_adc3>;
st,filter-order = <1>;
};
};
...