iio: adc: add max11205 adc driver

Adding support for max11205 16-bit single-channel ultra-low power
delta-sigma adc.
The MAX11205 is compatible with the 2-wire interface and uses
SCLK and RDY/DOUT for serial communications. In this mode, all
controls are implemented by timing the high or low phase of the SCLK.
The 2-wire serial interface only allows for data to be read out through
the RDY/DOUT output.

Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220831133021.215625-2-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/adc/Kconfig

@@ -653,6 +653,20 @@ config MAX1118
 	  To compile this driver as a module, choose M here: the module will be
 	  called max1118.
 
+config MAX11205
+	tristate "Maxim max11205 ADC driver"
+	depends on SPI
+	select AD_SIGMA_DELTA
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+	help
+	  Say yes here to build support for Maxim max11205 16-bit, single-channel
+	  ultra-low power delta-sigma ADC.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called max11205.
+
 config MAX1241
 	tristate "Maxim max1241 ADC driver"
 	depends on SPI_MASTER

drivers/iio/adc/Makefile

@@ -61,6 +61,7 @@ obj-$(CONFIG_LTC2497) += ltc2497.o ltc2497-core.o
 obj-$(CONFIG_MAX1027) += max1027.o
 obj-$(CONFIG_MAX11100) += max11100.o
 obj-$(CONFIG_MAX1118) += max1118.o
+obj-$(CONFIG_MAX11205) += max11205.o
 obj-$(CONFIG_MAX1241) += max1241.o
 obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MAX9611) += max9611.o

drivers/iio/adc/max11205.c

@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Maxim MAX11205 16-Bit Delta-Sigma ADC
+ *
+ * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-max11205.pdf
+ * Copyright (C) 2022 Analog Devices, Inc.
+ * Author: Ramona Bolboaca <ramona.bolboaca@analog.com>
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/adc/ad_sigma_delta.h>
+
+#define MAX11205_BIT_SCALE	15
+#define MAX11205A_OUT_DATA_RATE	116
+#define MAX11205B_OUT_DATA_RATE	13
+
+enum max11205_chip_type {
+	TYPE_MAX11205A,
+	TYPE_MAX11205B,
+};
+
+struct max11205_chip_info {
+	unsigned int	out_data_rate;
+	const char	*name;
+};
+
+struct max11205_state {
+	const struct max11205_chip_info	*chip_info;
+	struct regulator		*vref;
+	struct ad_sigma_delta		sd;
+};
+
+static const struct ad_sigma_delta_info max11205_sigma_delta_info = {
+	.has_registers = false,
+};
+
+static int max11205_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct max11205_state *st = iio_priv(indio_dev);
+	int reg_mv;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return ad_sigma_delta_single_conversion(indio_dev, chan, val);
+	case IIO_CHAN_INFO_SCALE:
+		reg_mv = regulator_get_voltage(st->vref);
+		if (reg_mv < 0)
+			return reg_mv;
+		reg_mv /= 1000;
+		*val = reg_mv;
+		*val2 = MAX11205_BIT_SCALE;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = st->chip_info->out_data_rate;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info max11205_iio_info = {
+	.read_raw = max11205_read_raw,
+	.validate_trigger = ad_sd_validate_trigger,
+};
+
+static const struct iio_chan_spec max11205_channels[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static const struct max11205_chip_info max11205_chip_info[] = {
+	[TYPE_MAX11205A] = {
+		.out_data_rate = MAX11205A_OUT_DATA_RATE,
+		.name = "max11205a",
+	},
+	[TYPE_MAX11205B] = {
+		.out_data_rate = MAX11205B_OUT_DATA_RATE,
+		.name = "max11205b",
+	},
+};
+
+static void max11205_reg_disable(void *reg)
+{
+	regulator_disable(reg);
+}
+
+static int max11205_probe(struct spi_device *spi)
+{
+	struct max11205_state *st;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	ad_sd_init(&st->sd, indio_dev, spi, &max11205_sigma_delta_info);
+
+	st->chip_info = device_get_match_data(&spi->dev);
+	if (!st->chip_info)
+		st->chip_info =
+			(const struct max11205_chip_info *)spi_get_device_id(spi)->driver_data;
+
+	indio_dev->name = st->chip_info->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = max11205_channels;
+	indio_dev->num_channels = 1;
+	indio_dev->info = &max11205_iio_info;
+
+	st->vref = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(st->vref))
+		return dev_err_probe(&spi->dev, PTR_ERR(st->vref),
+				     "Failed to get vref regulator\n");
+
+	ret = regulator_enable(st->vref);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&spi->dev, max11205_reg_disable, st->vref);
+	if (ret)
+		return ret;
+
+	ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id max11205_spi_ids[] = {
+	{ "max11205a", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205A] },
+	{ "max11205b", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205B] },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, max11205_spi_ids);
+
+static const struct of_device_id max11205_dt_ids[] = {
+	{
+		.compatible = "maxim,max11205a",
+		.data = &max11205_chip_info[TYPE_MAX11205A],
+	},
+	{
+		.compatible = "maxim,max11205b",
+		.data = &max11205_chip_info[TYPE_MAX11205B],
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max11205_dt_ids);
+
+static struct spi_driver max11205_spi_driver = {
+	.driver = {
+		.name = "max11205",
+		.of_match_table = max11205_dt_ids,
+	},
+	.probe = max11205_probe,
+	.id_table = max11205_spi_ids,
+};
+module_spi_driver(max11205_spi_driver);
+
+MODULE_AUTHOR("Ramona Bolboaca <ramona.bolboaca@analog.com>");
+MODULE_DESCRIPTION("MAX11205 ADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_AD_SIGMA_DELTA);