From 0d46fafc0364688c54b4a9d21cee0cb2eabf43bd Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 15 Jun 2020 10:41:06 +0200 Subject: [PATCH] clk: bcm2835: Don't cache the PLLB rate The PLLB rate will be changed through the firmware clocks drivers and will change behind this drivers' back, so we don't want to cache the rate. Acked-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/9864daba2f584ed49aee5ed1d2f4d48507c58197.1592210452.git-series.maxime@cerno.tech Signed-off-by: Stephen Boyd --- drivers/clk/bcm/clk-bcm2835.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index b50f00f109bf..027eba31f793 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -1700,7 +1700,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .min_rate = 600000000u, .max_rate = 3000000000u, - .max_fb_rate = BCM2835_MAX_FB_RATE), + .max_fb_rate = BCM2835_MAX_FB_RATE, + .flags = CLK_GET_RATE_NOCACHE), [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV( SOC_ALL, .name = "pllb_arm", @@ -1710,7 +1711,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .load_mask = CM_PLLB_LOADARM, .hold_mask = CM_PLLB_HOLDARM, .fixed_divider = 1, - .flags = CLK_SET_RATE_PARENT), + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE), /* * PLLC is the core PLL, used to drive the core VPU clock.