mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-13 23:24:05 +08:00
USB Serial Keyspan: add support for USA-49WG & USA-28XG
Add support for Keyspan adapters: USA-49WG and USA-28XG Signed-off-by: Lucy P. McCoy <lucy@keyspan.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Lucy McCoy
Greg Kroah-Hartman
parent
87e71b473e
commit
0ca1268e10
@ -115,12 +115,13 @@ static int debug;
|
||||
/*
|
||||
* Version Information
|
||||
*/
|
||||
#define DRIVER_VERSION "v1.1.4"
|
||||
#define DRIVER_VERSION "v1.1.5"
|
||||
#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
|
||||
#define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
|
||||
|
||||
#define INSTAT_BUFLEN 32
|
||||
#define GLOCONT_BUFLEN 64
|
||||
#define INDAT49W_BUFLEN 512
|
||||
|
||||
/* Per device and per port private data */
|
||||
struct keyspan_serial_private {
|
||||
@ -129,9 +130,15 @@ struct keyspan_serial_private {
|
||||
struct urb *instat_urb;
|
||||
char instat_buf[INSTAT_BUFLEN];
|
||||
|
||||
/* added to support 49wg, where data from all 4 ports comes in on 1 EP */
|
||||
/* and high-speed supported */
|
||||
struct urb *indat_urb;
|
||||
char indat_buf[INDAT49W_BUFLEN];
|
||||
|
||||
/* XXX this one probably will need a lock */
|
||||
struct urb *glocont_urb;
|
||||
char glocont_buf[GLOCONT_BUFLEN];
|
||||
char ctrl_buf[8]; // for EP0 control message
|
||||
};
|
||||
|
||||
struct keyspan_port_private {
|
||||
@ -179,12 +186,13 @@ struct keyspan_port_private {
|
||||
|
||||
|
||||
/* Include Keyspan message headers. All current Keyspan Adapters
|
||||
make use of one of four message formats which are referred
|
||||
to as USA-26, USA-28 and USA-49, USA-90 by Keyspan and within this driver. */
|
||||
make use of one of five message formats which are referred
|
||||
to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and within this driver. */
|
||||
#include "keyspan_usa26msg.h"
|
||||
#include "keyspan_usa28msg.h"
|
||||
#include "keyspan_usa49msg.h"
|
||||
#include "keyspan_usa90msg.h"
|
||||
#include "keyspan_usa67msg.h"
|
||||
|
||||
|
||||
/* Functions used by new usb-serial code. */
|
||||
@ -850,13 +858,89 @@ static void usa49_indat_callback(struct urb *urb)
|
||||
}
|
||||
}
|
||||
|
||||
static void usa49wg_indat_callback(struct urb *urb)
|
||||
{
|
||||
int i, len, x, err;
|
||||
struct usb_serial *serial;
|
||||
struct usb_serial_port *port;
|
||||
struct tty_struct *tty;
|
||||
unsigned char *data = urb->transfer_buffer;
|
||||
|
||||
dbg ("%s", __FUNCTION__);
|
||||
|
||||
serial = urb->context;
|
||||
|
||||
if (urb->status) {
|
||||
dbg("%s - nonzero status: %x", __FUNCTION__, urb->status);
|
||||
return;
|
||||
}
|
||||
|
||||
/* inbound data is in the form P#, len, status, data */
|
||||
i = 0;
|
||||
len = 0;
|
||||
|
||||
if (urb->actual_length) {
|
||||
while (i < urb->actual_length) {
|
||||
|
||||
/* Check port number from message*/
|
||||
if (data[i] >= serial->num_ports) {
|
||||
dbg ("%s - Unexpected port number %d",
|
||||
__FUNCTION__, data[i]);
|
||||
return;
|
||||
}
|
||||
port = serial->port[data[i++]];
|
||||
tty = port->tty;
|
||||
len = data[i++];
|
||||
|
||||
/* 0x80 bit is error flag */
|
||||
if ((data[i] & 0x80) == 0) {
|
||||
/* no error on any byte */
|
||||
i++;
|
||||
for (x = 1; x < len ; ++x)
|
||||
if (port->open_count)
|
||||
tty_insert_flip_char(tty,
|
||||
data[i++], 0);
|
||||
else
|
||||
i++;
|
||||
} else {
|
||||
/*
|
||||
* some bytes had errors, every byte has status
|
||||
*/
|
||||
for (x = 0; x + 1 < len; x += 2) {
|
||||
int stat = data[i], flag = 0;
|
||||
if (stat & RXERROR_OVERRUN)
|
||||
flag |= TTY_OVERRUN;
|
||||
if (stat & RXERROR_FRAMING)
|
||||
flag |= TTY_FRAME;
|
||||
if (stat & RXERROR_PARITY)
|
||||
flag |= TTY_PARITY;
|
||||
/* XXX should handle break (0x10) */
|
||||
if (port->open_count)
|
||||
tty_insert_flip_char(tty,
|
||||
data[i+1], flag);
|
||||
i += 2;
|
||||
}
|
||||
}
|
||||
if (port->open_count)
|
||||
tty_flip_buffer_push(tty);
|
||||
}
|
||||
}
|
||||
|
||||
/* Resubmit urb so we continue receiving */
|
||||
urb->dev = serial->dev;
|
||||
|
||||
err = usb_submit_urb(urb, GFP_ATOMIC);
|
||||
if (err != 0)
|
||||
dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
|
||||
}
|
||||
|
||||
/* not used, usa-49 doesn't have per-port control endpoints */
|
||||
static void usa49_outcont_callback(struct urb *urb)
|
||||
static void usa49_outcont_callback(struct urb *urb)
|
||||
{
|
||||
dbg ("%s", __FUNCTION__);
|
||||
}
|
||||
|
||||
static void usa90_indat_callback(struct urb *urb)
|
||||
static void usa90_indat_callback(struct urb *urb)
|
||||
{
|
||||
int i, err;
|
||||
int endpoint;
|
||||
@ -869,7 +953,6 @@ static void usa90_indat_callback(struct urb *urb)
|
||||
|
||||
endpoint = usb_pipeendpoint(urb->pipe);
|
||||
|
||||
|
||||
if (urb->status) {
|
||||
dbg("%s - nonzero status: %x on endpoint %d.",
|
||||
__FUNCTION__, urb->status, endpoint);
|
||||
@ -995,6 +1078,87 @@ static void usa90_outcont_callback(struct urb *urb)
|
||||
}
|
||||
}
|
||||
|
||||
/* Status messages from the 28xg */
|
||||
static void usa67_instat_callback(struct urb *urb)
|
||||
{
|
||||
int err;
|
||||
unsigned char *data = urb->transfer_buffer;
|
||||
struct keyspan_usa67_portStatusMessage *msg;
|
||||
struct usb_serial *serial;
|
||||
struct usb_serial_port *port;
|
||||
struct keyspan_port_private *p_priv;
|
||||
int old_dcd_state;
|
||||
|
||||
dbg ("%s", __FUNCTION__);
|
||||
|
||||
serial = urb->context;
|
||||
|
||||
if (urb->status) {
|
||||
dbg("%s - nonzero status: %x", __FUNCTION__, urb->status);
|
||||
return;
|
||||
}
|
||||
|
||||
if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) {
|
||||
dbg("%s - bad length %d", __FUNCTION__, urb->actual_length);
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
/* Now do something useful with the data */
|
||||
msg = (struct keyspan_usa67_portStatusMessage *)data;
|
||||
|
||||
/* Check port number from message and retrieve private data */
|
||||
if (msg->port >= serial->num_ports) {
|
||||
dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port);
|
||||
return;
|
||||
}
|
||||
|
||||
port = serial->port[msg->port];
|
||||
p_priv = usb_get_serial_port_data(port);
|
||||
|
||||
/* Update handshaking pin state information */
|
||||
old_dcd_state = p_priv->dcd_state;
|
||||
p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
|
||||
p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
|
||||
|
||||
if (port->tty && !C_CLOCAL(port->tty)
|
||||
&& old_dcd_state != p_priv->dcd_state) {
|
||||
if (old_dcd_state)
|
||||
tty_hangup(port->tty);
|
||||
/* else */
|
||||
/* wake_up_interruptible(&p_priv->open_wait); */
|
||||
}
|
||||
|
||||
/* Resubmit urb so we continue receiving */
|
||||
urb->dev = serial->dev;
|
||||
err = usb_submit_urb(urb, GFP_ATOMIC);
|
||||
if (err != 0)
|
||||
dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
|
||||
}
|
||||
|
||||
static void usa67_glocont_callback(struct urb *urb)
|
||||
{
|
||||
struct usb_serial *serial;
|
||||
struct usb_serial_port *port;
|
||||
struct keyspan_port_private *p_priv;
|
||||
int i;
|
||||
|
||||
dbg ("%s", __FUNCTION__);
|
||||
|
||||
serial = urb->context;
|
||||
for (i = 0; i < serial->num_ports; ++i) {
|
||||
port = serial->port[i];
|
||||
p_priv = usb_get_serial_port_data(port);
|
||||
|
||||
if (p_priv->resend_cont) {
|
||||
dbg ("%s - sending setup", __FUNCTION__);
|
||||
keyspan_usa67_send_setup(serial, port,
|
||||
p_priv->resend_cont - 1);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static int keyspan_write_room (struct usb_serial_port *port)
|
||||
{
|
||||
struct keyspan_port_private *p_priv;
|
||||
@ -1311,6 +1475,11 @@ static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint,
|
||||
return NULL;
|
||||
}
|
||||
|
||||
if (endpoint == 0) {
|
||||
/* control EP filled in when used */
|
||||
return urb;
|
||||
}
|
||||
|
||||
ep_desc = find_ep(serial, endpoint);
|
||||
if (!ep_desc) {
|
||||
/* leak the urb, something's wrong and the callers don't care */
|
||||
@ -1380,6 +1549,14 @@ static struct callbacks {
|
||||
.outdat_callback = usa2x_outdat_callback,
|
||||
.inack_callback = usa28_inack_callback,
|
||||
.outcont_callback = usa90_outcont_callback,
|
||||
}, {
|
||||
/* msg_usa67 callbacks */
|
||||
.instat_callback = usa67_instat_callback,
|
||||
.glocont_callback = usa67_glocont_callback,
|
||||
.indat_callback = usa26_indat_callback,
|
||||
.outdat_callback = usa2x_outdat_callback,
|
||||
.inack_callback = usa26_inack_callback,
|
||||
.outcont_callback = usa26_outcont_callback,
|
||||
}
|
||||
};
|
||||
|
||||
@ -1410,6 +1587,11 @@ static void keyspan_setup_urbs(struct usb_serial *serial)
|
||||
serial, s_priv->instat_buf, INSTAT_BUFLEN,
|
||||
cback->instat_callback);
|
||||
|
||||
s_priv->indat_urb = keyspan_setup_urb
|
||||
(serial, d_details->indat_endpoint, USB_DIR_IN,
|
||||
serial, s_priv->indat_buf, INDAT49W_BUFLEN,
|
||||
usa49wg_indat_callback);
|
||||
|
||||
s_priv->glocont_urb = keyspan_setup_urb
|
||||
(serial, d_details->glocont_endpoint, USB_DIR_OUT,
|
||||
serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
|
||||
@ -1685,8 +1867,8 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
|
||||
}
|
||||
|
||||
/* Save reset port val for resend.
|
||||
Don't overwrite resend for close condition. */
|
||||
if (p_priv->resend_cont != 3)
|
||||
Don't overwrite resend for open/close condition. */
|
||||
if ((reset_port + 1) > p_priv->resend_cont)
|
||||
p_priv->resend_cont = reset_port + 1;
|
||||
if (this_urb->status == -EINPROGRESS) {
|
||||
/* dbg ("%s - already writing", __FUNCTION__); */
|
||||
@ -1836,8 +2018,8 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
|
||||
}
|
||||
|
||||
/* Save reset port val for resend.
|
||||
Don't overwrite resend for close condition. */
|
||||
if (p_priv->resend_cont != 3)
|
||||
Don't overwrite resend for open/close condition. */
|
||||
if ((reset_port + 1) > p_priv->resend_cont)
|
||||
p_priv->resend_cont = reset_port + 1;
|
||||
if (this_urb->status == -EINPROGRESS) {
|
||||
dbg ("%s already writing", __FUNCTION__);
|
||||
@ -1940,11 +2122,11 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
|
||||
struct usb_serial_port *port,
|
||||
int reset_port)
|
||||
{
|
||||
struct keyspan_usa49_portControlMessage msg;
|
||||
struct keyspan_usa49_portControlMessage msg;
|
||||
struct usb_ctrlrequest *dr = NULL;
|
||||
struct keyspan_serial_private *s_priv;
|
||||
struct keyspan_port_private *p_priv;
|
||||
const struct keyspan_device_details *d_details;
|
||||
int glocont_urb;
|
||||
struct urb *this_urb;
|
||||
int err, device_port;
|
||||
|
||||
@ -1954,10 +2136,9 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
|
||||
p_priv = usb_get_serial_port_data(port);
|
||||
d_details = s_priv->device_details;
|
||||
|
||||
glocont_urb = d_details->glocont_endpoint;
|
||||
this_urb = s_priv->glocont_urb;
|
||||
|
||||
/* Work out which port within the device is being setup */
|
||||
/* Work out which port within the device is being setup */
|
||||
device_port = port->number - port->serial->minor;
|
||||
|
||||
dbg("%s - endpoint %d port %d (%d)",__FUNCTION__, usb_pipeendpoint(this_urb->pipe), port->number, device_port);
|
||||
@ -1969,9 +2150,10 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
|
||||
}
|
||||
|
||||
/* Save reset port val for resend.
|
||||
Don't overwrite resend for close condition. */
|
||||
if (p_priv->resend_cont != 3)
|
||||
Don't overwrite resend for open/close condition. */
|
||||
if ((reset_port + 1) > p_priv->resend_cont)
|
||||
p_priv->resend_cont = reset_port + 1;
|
||||
|
||||
if (this_urb->status == -EINPROGRESS) {
|
||||
/* dbg ("%s - already writing", __FUNCTION__); */
|
||||
mdelay(5);
|
||||
@ -2083,20 +2265,39 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
|
||||
msg.dtr = p_priv->dtr_state;
|
||||
|
||||
p_priv->resend_cont = 0;
|
||||
memcpy (this_urb->transfer_buffer, &msg, sizeof(msg));
|
||||
|
||||
/* send the data out the device on control endpoint */
|
||||
this_urb->transfer_buffer_length = sizeof(msg);
|
||||
|
||||
this_urb->dev = serial->dev;
|
||||
/* if the device is a 49wg, we send control message on usb control EP 0 */
|
||||
|
||||
if (d_details->product_id == keyspan_usa49wg_product_id) {
|
||||
dr = (void *)(s_priv->ctrl_buf);
|
||||
dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
|
||||
dr->bRequest = 0xB0; /* 49wg control message */;
|
||||
dr->wValue = 0;
|
||||
dr->wIndex = 0;
|
||||
dr->wLength = cpu_to_le16(sizeof(msg));
|
||||
|
||||
memcpy (s_priv->glocont_buf, &msg, sizeof(msg));
|
||||
|
||||
usb_fill_control_urb(this_urb, serial->dev, usb_sndctrlpipe(serial->dev, 0),
|
||||
(unsigned char *)dr, s_priv->glocont_buf, sizeof(msg),
|
||||
usa49_glocont_callback, serial);
|
||||
|
||||
} else {
|
||||
memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
|
||||
|
||||
/* send the data out the device on control endpoint */
|
||||
this_urb->transfer_buffer_length = sizeof(msg);
|
||||
|
||||
this_urb->dev = serial->dev;
|
||||
}
|
||||
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
|
||||
dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err);
|
||||
}
|
||||
#if 0
|
||||
else {
|
||||
dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __FUNCTION__,
|
||||
outcont_urb, this_urb->transfer_buffer_length,
|
||||
usb_pipeendpoint(this_urb->pipe));
|
||||
outcont_urb, this_urb->transfer_buffer_length,
|
||||
usb_pipeendpoint(this_urb->pipe));
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -2241,6 +2442,154 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int keyspan_usa67_send_setup(struct usb_serial *serial,
|
||||
struct usb_serial_port *port,
|
||||
int reset_port)
|
||||
{
|
||||
struct keyspan_usa67_portControlMessage msg;
|
||||
struct keyspan_serial_private *s_priv;
|
||||
struct keyspan_port_private *p_priv;
|
||||
const struct keyspan_device_details *d_details;
|
||||
struct urb *this_urb;
|
||||
int err, device_port;
|
||||
|
||||
dbg ("%s", __FUNCTION__);
|
||||
|
||||
s_priv = usb_get_serial_data(serial);
|
||||
p_priv = usb_get_serial_port_data(port);
|
||||
d_details = s_priv->device_details;
|
||||
|
||||
this_urb = s_priv->glocont_urb;
|
||||
|
||||
/* Work out which port within the device is being setup */
|
||||
device_port = port->number - port->serial->minor;
|
||||
|
||||
/* Make sure we have an urb then send the message */
|
||||
if (this_urb == NULL) {
|
||||
dbg("%s - oops no urb for port %d.", __FUNCTION__,
|
||||
port->number);
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* Save reset port val for resend.
|
||||
Don't overwrite resend for open/close condition. */
|
||||
if ((reset_port + 1) > p_priv->resend_cont)
|
||||
p_priv->resend_cont = reset_port + 1;
|
||||
if (this_urb->status == -EINPROGRESS) {
|
||||
/* dbg ("%s - already writing", __FUNCTION__); */
|
||||
mdelay(5);
|
||||
return(-1);
|
||||
}
|
||||
|
||||
memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage));
|
||||
|
||||
msg.port = device_port;
|
||||
|
||||
/* Only set baud rate if it's changed */
|
||||
if (p_priv->old_baud != p_priv->baud) {
|
||||
p_priv->old_baud = p_priv->baud;
|
||||
msg.setClocking = 0xff;
|
||||
if (d_details->calculate_baud_rate
|
||||
(p_priv->baud, d_details->baudclk, &msg.baudHi,
|
||||
&msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
|
||||
dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__,
|
||||
p_priv->baud);
|
||||
msg.baudLo = 0;
|
||||
msg.baudHi = 125; /* Values for 9600 baud */
|
||||
msg.prescaler = 10;
|
||||
}
|
||||
msg.setPrescaler = 0xff;
|
||||
}
|
||||
|
||||
msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
|
||||
switch (p_priv->cflag & CSIZE) {
|
||||
case CS5:
|
||||
msg.lcr |= USA_DATABITS_5;
|
||||
break;
|
||||
case CS6:
|
||||
msg.lcr |= USA_DATABITS_6;
|
||||
break;
|
||||
case CS7:
|
||||
msg.lcr |= USA_DATABITS_7;
|
||||
break;
|
||||
case CS8:
|
||||
msg.lcr |= USA_DATABITS_8;
|
||||
break;
|
||||
}
|
||||
if (p_priv->cflag & PARENB) {
|
||||
/* note USA_PARITY_NONE == 0 */
|
||||
msg.lcr |= (p_priv->cflag & PARODD)?
|
||||
USA_PARITY_ODD: USA_PARITY_EVEN;
|
||||
}
|
||||
msg.setLcr = 0xff;
|
||||
|
||||
msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
|
||||
msg.xonFlowControl = 0;
|
||||
msg.setFlowControl = 0xff;
|
||||
msg.forwardingLength = 16;
|
||||
msg.xonChar = 17;
|
||||
msg.xoffChar = 19;
|
||||
|
||||
if (reset_port == 1) {
|
||||
/* Opening port */
|
||||
msg._txOn = 1;
|
||||
msg._txOff = 0;
|
||||
msg.txFlush = 0;
|
||||
msg.txBreak = 0;
|
||||
msg.rxOn = 1;
|
||||
msg.rxOff = 0;
|
||||
msg.rxFlush = 1;
|
||||
msg.rxForward = 0;
|
||||
msg.returnStatus = 0;
|
||||
msg.resetDataToggle = 0xff;
|
||||
} else if (reset_port == 2) {
|
||||
/* Closing port */
|
||||
msg._txOn = 0;
|
||||
msg._txOff = 1;
|
||||
msg.txFlush = 0;
|
||||
msg.txBreak = 0;
|
||||
msg.rxOn = 0;
|
||||
msg.rxOff = 1;
|
||||
msg.rxFlush = 1;
|
||||
msg.rxForward = 0;
|
||||
msg.returnStatus = 0;
|
||||
msg.resetDataToggle = 0;
|
||||
} else {
|
||||
/* Sending intermediate configs */
|
||||
msg._txOn = (! p_priv->break_on);
|
||||
msg._txOff = 0;
|
||||
msg.txFlush = 0;
|
||||
msg.txBreak = (p_priv->break_on);
|
||||
msg.rxOn = 0;
|
||||
msg.rxOff = 0;
|
||||
msg.rxFlush = 0;
|
||||
msg.rxForward = 0;
|
||||
msg.returnStatus = 0;
|
||||
msg.resetDataToggle = 0x0;
|
||||
}
|
||||
|
||||
/* Do handshaking outputs */
|
||||
msg.setTxTriState_setRts = 0xff;
|
||||
msg.txTriState_rts = p_priv->rts_state;
|
||||
|
||||
msg.setHskoa_setDtr = 0xff;
|
||||
msg.hskoa_dtr = p_priv->dtr_state;
|
||||
|
||||
p_priv->resend_cont = 0;
|
||||
|
||||
memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
|
||||
|
||||
/* send the data out the device on control endpoint */
|
||||
this_urb->transfer_buffer_length = sizeof(msg);
|
||||
this_urb->dev = serial->dev;
|
||||
|
||||
err = usb_submit_urb(this_urb, GFP_ATOMIC);
|
||||
if (err != 0)
|
||||
dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__,
|
||||
err);
|
||||
return (0);
|
||||
}
|
||||
|
||||
static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
|
||||
{
|
||||
struct usb_serial *serial = port->serial;
|
||||
@ -2265,6 +2614,9 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
|
||||
case msg_usa90:
|
||||
keyspan_usa90_send_setup(serial, port, reset_port);
|
||||
break;
|
||||
case msg_usa67:
|
||||
keyspan_usa67_send_setup(serial, port, reset_port);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
@ -2313,9 +2665,19 @@ static int keyspan_startup (struct usb_serial *serial)
|
||||
|
||||
keyspan_setup_urbs(serial);
|
||||
|
||||
s_priv->instat_urb->dev = serial->dev;
|
||||
if ((err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL)) != 0) {
|
||||
dbg("%s - submit instat urb failed %d", __FUNCTION__, err);
|
||||
if (s_priv->instat_urb != NULL) {
|
||||
s_priv->instat_urb->dev = serial->dev;
|
||||
err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
|
||||
if (err != 0)
|
||||
dbg("%s - submit instat urb failed %d", __FUNCTION__,
|
||||
err);
|
||||
}
|
||||
if (s_priv->indat_urb != NULL) {
|
||||
s_priv->indat_urb->dev = serial->dev;
|
||||
err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
|
||||
if (err != 0)
|
||||
dbg("%s - submit indat urb failed %d", __FUNCTION__,
|
||||
err);
|
||||
}
|
||||
|
||||
return (0);
|
||||
@ -2335,6 +2697,7 @@ static void keyspan_shutdown (struct usb_serial *serial)
|
||||
/* Stop reading/writing urbs */
|
||||
stop_urb(s_priv->instat_urb);
|
||||
stop_urb(s_priv->glocont_urb);
|
||||
stop_urb(s_priv->indat_urb);
|
||||
for (i = 0; i < serial->num_ports; ++i) {
|
||||
port = serial->port[i];
|
||||
p_priv = usb_get_serial_port_data(port);
|
||||
@ -2348,6 +2711,7 @@ static void keyspan_shutdown (struct usb_serial *serial)
|
||||
|
||||
/* Now free them */
|
||||
usb_free_urb(s_priv->instat_urb);
|
||||
usb_free_urb(s_priv->indat_urb);
|
||||
usb_free_urb(s_priv->glocont_urb);
|
||||
for (i = 0; i < serial->num_ports; ++i) {
|
||||
port = serial->port[i];
|
||||
|
||||
@ -99,6 +99,10 @@ static int keyspan_usa90_send_setup (struct usb_serial *serial,
|
||||
struct usb_serial_port *port,
|
||||
int reset_port);
|
||||
|
||||
static int keyspan_usa67_send_setup (struct usb_serial *serial,
|
||||
struct usb_serial_port *port,
|
||||
int reset_port);
|
||||
|
||||
/* Struct used for firmware - increased size of data section
|
||||
to allow Keyspan's 'C' firmware struct to be used unmodified */
|
||||
struct ezusb_hex_record {
|
||||
@ -229,15 +233,17 @@ struct ezusb_hex_record {
|
||||
#define keyspan_usa28_product_id 0x010f
|
||||
#define keyspan_usa28x_product_id 0x0110
|
||||
#define keyspan_usa28xa_product_id 0x0115
|
||||
#define keyspan_usa28xb_product_id 0x0110
|
||||
#define keyspan_usa28xg_product_id 0x0135
|
||||
#define keyspan_usa49w_product_id 0x010a
|
||||
#define keyspan_usa49wlc_product_id 0x012a
|
||||
|
||||
#define keyspan_usa49wg_product_id 0x0131
|
||||
|
||||
struct keyspan_device_details {
|
||||
/* product ID value */
|
||||
int product_id;
|
||||
|
||||
enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90} msg_format;
|
||||
enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format;
|
||||
|
||||
/* Number of physical ports */
|
||||
int num_ports;
|
||||
@ -264,6 +270,9 @@ struct keyspan_device_details {
|
||||
/* Endpoint used for input status */
|
||||
int instat_endpoint;
|
||||
|
||||
/* Endpoint used for input data 49WG only */
|
||||
int indat_endpoint;
|
||||
|
||||
/* Endpoint used for global control functions */
|
||||
int glocont_endpoint;
|
||||
|
||||
@ -287,6 +296,7 @@ static const struct keyspan_device_details usa18x_device_details = {
|
||||
.inack_endpoints = {0x85},
|
||||
.outcont_endpoints = {0x05},
|
||||
.instat_endpoint = 0x87,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = 0x07,
|
||||
.calculate_baud_rate = keyspan_usa19w_calc_baud,
|
||||
.baudclk = KEYSPAN_USA18X_BAUDCLK,
|
||||
@ -303,6 +313,7 @@ static const struct keyspan_device_details usa19_device_details = {
|
||||
.inack_endpoints = {0x83},
|
||||
.outcont_endpoints = {0x03},
|
||||
.instat_endpoint = 0x84,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = -1,
|
||||
.calculate_baud_rate = keyspan_usa19_calc_baud,
|
||||
.baudclk = KEYSPAN_USA19_BAUDCLK,
|
||||
@ -319,6 +330,7 @@ static const struct keyspan_device_details usa19qi_device_details = {
|
||||
.inack_endpoints = {0x83},
|
||||
.outcont_endpoints = {0x03},
|
||||
.instat_endpoint = 0x84,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = -1,
|
||||
.calculate_baud_rate = keyspan_usa28_calc_baud,
|
||||
.baudclk = KEYSPAN_USA19_BAUDCLK,
|
||||
@ -335,6 +347,7 @@ static const struct keyspan_device_details mpr_device_details = {
|
||||
.inack_endpoints = {0x83},
|
||||
.outcont_endpoints = {0x03},
|
||||
.instat_endpoint = 0x84,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = -1,
|
||||
.calculate_baud_rate = keyspan_usa28_calc_baud,
|
||||
.baudclk = KEYSPAN_USA19_BAUDCLK,
|
||||
@ -351,6 +364,7 @@ static const struct keyspan_device_details usa19qw_device_details = {
|
||||
.inack_endpoints = {0x85},
|
||||
.outcont_endpoints = {0x05},
|
||||
.instat_endpoint = 0x87,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = 0x07,
|
||||
.calculate_baud_rate = keyspan_usa19w_calc_baud,
|
||||
.baudclk = KEYSPAN_USA19W_BAUDCLK,
|
||||
@ -367,6 +381,7 @@ static const struct keyspan_device_details usa19w_device_details = {
|
||||
.inack_endpoints = {0x85},
|
||||
.outcont_endpoints = {0x05},
|
||||
.instat_endpoint = 0x87,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = 0x07,
|
||||
.calculate_baud_rate = keyspan_usa19w_calc_baud,
|
||||
.baudclk = KEYSPAN_USA19W_BAUDCLK,
|
||||
@ -383,6 +398,7 @@ static const struct keyspan_device_details usa19hs_device_details = {
|
||||
.inack_endpoints = {-1},
|
||||
.outcont_endpoints = {0x02},
|
||||
.instat_endpoint = 0x82,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = -1,
|
||||
.calculate_baud_rate = keyspan_usa19hs_calc_baud,
|
||||
.baudclk = KEYSPAN_USA19HS_BAUDCLK,
|
||||
@ -399,6 +415,7 @@ static const struct keyspan_device_details usa28_device_details = {
|
||||
.inack_endpoints = {0x85, 0x86},
|
||||
.outcont_endpoints = {0x05, 0x06},
|
||||
.instat_endpoint = 0x87,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = 0x07,
|
||||
.calculate_baud_rate = keyspan_usa28_calc_baud,
|
||||
.baudclk = KEYSPAN_USA28_BAUDCLK,
|
||||
@ -415,6 +432,7 @@ static const struct keyspan_device_details usa28x_device_details = {
|
||||
.inack_endpoints = {0x85, 0x86},
|
||||
.outcont_endpoints = {0x05, 0x06},
|
||||
.instat_endpoint = 0x87,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = 0x07,
|
||||
.calculate_baud_rate = keyspan_usa19w_calc_baud,
|
||||
.baudclk = KEYSPAN_USA28X_BAUDCLK,
|
||||
@ -431,11 +449,28 @@ static const struct keyspan_device_details usa28xa_device_details = {
|
||||
.inack_endpoints = {0x85, 0x86},
|
||||
.outcont_endpoints = {0x05, 0x06},
|
||||
.instat_endpoint = 0x87,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = 0x07,
|
||||
.calculate_baud_rate = keyspan_usa19w_calc_baud,
|
||||
.baudclk = KEYSPAN_USA28X_BAUDCLK,
|
||||
};
|
||||
|
||||
static const struct keyspan_device_details usa28xg_device_details = {
|
||||
.product_id = keyspan_usa28xg_product_id,
|
||||
.msg_format = msg_usa67,
|
||||
.num_ports = 2,
|
||||
.indat_endp_flip = 0,
|
||||
.outdat_endp_flip = 0,
|
||||
.indat_endpoints = {0x84, 0x88},
|
||||
.outdat_endpoints = {0x02, 0x06},
|
||||
.inack_endpoints = {-1, -1},
|
||||
.outcont_endpoints = {-1, -1},
|
||||
.instat_endpoint = 0x81,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = 0x01,
|
||||
.calculate_baud_rate = keyspan_usa19w_calc_baud,
|
||||
.baudclk = KEYSPAN_USA28X_BAUDCLK,
|
||||
};
|
||||
/* We don't need a separate entry for the usa28xb as it appears as a 28x anyway */
|
||||
|
||||
static const struct keyspan_device_details usa49w_device_details = {
|
||||
@ -449,6 +484,7 @@ static const struct keyspan_device_details usa49w_device_details = {
|
||||
.inack_endpoints = {-1, -1, -1, -1},
|
||||
.outcont_endpoints = {-1, -1, -1, -1},
|
||||
.instat_endpoint = 0x87,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = 0x07,
|
||||
.calculate_baud_rate = keyspan_usa19w_calc_baud,
|
||||
.baudclk = KEYSPAN_USA49W_BAUDCLK,
|
||||
@ -465,11 +501,29 @@ static const struct keyspan_device_details usa49wlc_device_details = {
|
||||
.inack_endpoints = {-1, -1, -1, -1},
|
||||
.outcont_endpoints = {-1, -1, -1, -1},
|
||||
.instat_endpoint = 0x87,
|
||||
.indat_endpoint = -1,
|
||||
.glocont_endpoint = 0x07,
|
||||
.calculate_baud_rate = keyspan_usa19w_calc_baud,
|
||||
.baudclk = KEYSPAN_USA19W_BAUDCLK,
|
||||
};
|
||||
|
||||
static const struct keyspan_device_details usa49wg_device_details = {
|
||||
.product_id = keyspan_usa49wg_product_id,
|
||||
.msg_format = msg_usa49,
|
||||
.num_ports = 4,
|
||||
.indat_endp_flip = 0,
|
||||
.outdat_endp_flip = 0,
|
||||
.indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */
|
||||
.outdat_endpoints = {0x01, 0x02, 0x04, 0x06},
|
||||
.inack_endpoints = {-1, -1, -1, -1},
|
||||
.outcont_endpoints = {-1, -1, -1, -1},
|
||||
.instat_endpoint = 0x81,
|
||||
.indat_endpoint = 0x88,
|
||||
.glocont_endpoint = 0x00, /* uses control EP */
|
||||
.calculate_baud_rate = keyspan_usa19w_calc_baud,
|
||||
.baudclk = KEYSPAN_USA19W_BAUDCLK,
|
||||
};
|
||||
|
||||
static const struct keyspan_device_details *keyspan_devices[] = {
|
||||
&usa18x_device_details,
|
||||
&usa19_device_details,
|
||||
@ -481,9 +535,11 @@ static const struct keyspan_device_details *keyspan_devices[] = {
|
||||
&usa28_device_details,
|
||||
&usa28x_device_details,
|
||||
&usa28xa_device_details,
|
||||
&usa28xg_device_details,
|
||||
/* 28xb not required as it renumerates as a 28x */
|
||||
&usa49w_device_details,
|
||||
&usa49wlc_device_details,
|
||||
&usa49wg_device_details,
|
||||
NULL,
|
||||
};
|
||||
|
||||
@ -510,8 +566,11 @@ static struct usb_device_id keyspan_ids_combined[] = {
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
|
||||
{ } /* Terminating entry */
|
||||
};
|
||||
|
||||
@ -557,12 +616,15 @@ static struct usb_device_id keyspan_2port_ids[] = {
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
|
||||
{ } /* Terminating entry */
|
||||
};
|
||||
|
||||
static struct usb_device_id keyspan_4port_ids[] = {
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
|
||||
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
|
||||
{ } /* Terminating entry */
|
||||
};
|
||||
|
||||
@ -573,7 +635,6 @@ static struct usb_serial_driver keyspan_pre_device = {
|
||||
.name = "keyspan_no_firm",
|
||||
},
|
||||
.description = "Keyspan - (without firmware)",
|
||||
.usb_driver = &keyspan_driver,
|
||||
.id_table = keyspan_pre_ids,
|
||||
.num_interrupt_in = NUM_DONT_CARE,
|
||||
.num_bulk_in = NUM_DONT_CARE,
|
||||
@ -588,7 +649,6 @@ static struct usb_serial_driver keyspan_1port_device = {
|
||||
.name = "keyspan_1",
|
||||
},
|
||||
.description = "Keyspan 1 port adapter",
|
||||
.usb_driver = &keyspan_driver,
|
||||
.id_table = keyspan_1port_ids,
|
||||
.num_interrupt_in = NUM_DONT_CARE,
|
||||
.num_bulk_in = NUM_DONT_CARE,
|
||||
@ -616,7 +676,6 @@ static struct usb_serial_driver keyspan_2port_device = {
|
||||
.name = "keyspan_2",
|
||||
},
|
||||
.description = "Keyspan 2 port adapter",
|
||||
.usb_driver = &keyspan_driver,
|
||||
.id_table = keyspan_2port_ids,
|
||||
.num_interrupt_in = NUM_DONT_CARE,
|
||||
.num_bulk_in = NUM_DONT_CARE,
|
||||
@ -644,11 +703,10 @@ static struct usb_serial_driver keyspan_4port_device = {
|
||||
.name = "keyspan_4",
|
||||
},
|
||||
.description = "Keyspan 4 port adapter",
|
||||
.usb_driver = &keyspan_driver,
|
||||
.id_table = keyspan_4port_ids,
|
||||
.num_interrupt_in = NUM_DONT_CARE,
|
||||
.num_bulk_in = 5,
|
||||
.num_bulk_out = 5,
|
||||
.num_bulk_in = NUM_DONT_CARE,
|
||||
.num_bulk_out = NUM_DONT_CARE,
|
||||
.num_ports = 4,
|
||||
.open = keyspan_open,
|
||||
.close = keyspan_close,
|
||||
|
||||
254
drivers/usb/serial/keyspan_usa67msg.h
Normal file
254
drivers/usb/serial/keyspan_usa67msg.h
Normal file
@ -0,0 +1,254 @@
|
||||
/*
|
||||
usa67msg.h
|
||||
|
||||
Copyright (c) 1998-2007 InnoSys Incorporated. All Rights Reserved
|
||||
This file is available under a BSD-style copyright
|
||||
|
||||
Keyspan USB Async Firmware to run on Anchor FX1
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are
|
||||
met:
|
||||
|
||||
1. Redistributions of source code must retain this licence text
|
||||
without modification, this list of conditions, and the following
|
||||
disclaimer. The following copyright notice must appear immediately at
|
||||
the beginning of all source files:
|
||||
|
||||
Copyright (c) 1998-2007 InnoSys Incorporated. All Rights Reserved
|
||||
|
||||
This file is available under a BSD-style copyright
|
||||
|
||||
2. Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
|
||||
3. The name of InnoSys Incorprated may not be used to endorse or promote
|
||||
products derived from this software without specific prior written
|
||||
permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
|
||||
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
||||
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
SUCH DAMAGE.
|
||||
|
||||
Fourth revision: This message format supports the USA28XG
|
||||
|
||||
Buffer formats for RX/TX data messages are not defined by
|
||||
a structure, but are described here:
|
||||
|
||||
USB OUT (host -> USAxx, transmit) messages contain a
|
||||
REQUEST_ACK indicator (set to 0xff to request an ACK at the
|
||||
completion of transmit; 0x00 otherwise), followed by data:
|
||||
|
||||
RQSTACK DAT DAT DAT ...
|
||||
|
||||
with a total data length of up to 63.
|
||||
|
||||
USB IN (USAxx -> host, receive) messages begin with a status
|
||||
byte in which the 0x80 bit is either:
|
||||
|
||||
(a) 0x80 bit clear
|
||||
indicates that the bytes following it are all data
|
||||
bytes:
|
||||
|
||||
STAT DATA DATA DATA DATA DATA ...
|
||||
|
||||
for a total of up to 63 DATA bytes,
|
||||
|
||||
or:
|
||||
|
||||
(b) 0x80 bit set
|
||||
indiates that the bytes following alternate data and
|
||||
status bytes:
|
||||
|
||||
STAT DATA STAT DATA STAT DATA STAT DATA ...
|
||||
|
||||
for a total of up to 32 DATA bytes.
|
||||
|
||||
The valid bits in the STAT bytes are:
|
||||
|
||||
OVERRUN 0x02
|
||||
PARITY 0x04
|
||||
FRAMING 0x08
|
||||
BREAK 0x10
|
||||
|
||||
Notes:
|
||||
|
||||
(1) The OVERRUN bit can appear in either (a) or (b) format
|
||||
messages, but the but the PARITY/FRAMING/BREAK bits
|
||||
only appear in (b) format messages.
|
||||
(2) For the host to determine the exact point at which the
|
||||
overrun occurred (to identify the point in the data
|
||||
stream at which the data was lost), it needs to count
|
||||
128 characters, starting at the first character of the
|
||||
message in which OVERRUN was reported; the lost character(s)
|
||||
would have been received between the 128th and 129th
|
||||
characters.
|
||||
(3) An RX data message in which the first byte has 0x80 clear
|
||||
serves as a "break off" indicator.
|
||||
|
||||
revision history:
|
||||
|
||||
1999feb10 add reportHskiaChanges to allow us to ignore them
|
||||
1999feb10 add txAckThreshold for fast+loose throughput enhancement
|
||||
1999mar30 beef up support for RX error reporting
|
||||
1999apr14 add resetDataToggle to control message
|
||||
2000jan04 merge with usa17msg.h
|
||||
2000jun01 add extended BSD-style copyright text
|
||||
2001jul05 change message format to improve OVERRUN case
|
||||
2002jun05 update copyright date, improve comments
|
||||
2006feb06 modify for FX1 chip
|
||||
|
||||
*/
|
||||
|
||||
#ifndef __USA67MSG__
|
||||
#define __USA67MSG__
|
||||
|
||||
|
||||
// all things called "ControlMessage" are sent on the 'control' endpoint
|
||||
|
||||
typedef struct keyspan_usa67_portControlMessage
|
||||
{
|
||||
u8 port; // 0 or 1 (selects port)
|
||||
/*
|
||||
there are three types of "commands" sent in the control message:
|
||||
|
||||
1. configuration changes which must be requested by setting
|
||||
the corresponding "set" flag (and should only be requested
|
||||
when necessary, to reduce overhead on the device):
|
||||
*/
|
||||
u8 setClocking, // host requests baud rate be set
|
||||
baudLo, // host does baud divisor calculation
|
||||
baudHi, // baudHi is only used for first port (gives lower rates)
|
||||
externalClock_txClocking,
|
||||
// 0=internal, other=external
|
||||
|
||||
setLcr, // host requests lcr be set
|
||||
lcr, // use PARITY, STOPBITS, DATABITS below
|
||||
|
||||
setFlowControl, // host requests flow control be set
|
||||
ctsFlowControl, // 1=use CTS flow control, 0=don't
|
||||
xonFlowControl, // 1=use XON/XOFF flow control, 0=don't
|
||||
xonChar, // specified in current character format
|
||||
xoffChar, // specified in current character format
|
||||
|
||||
setTxTriState_setRts,
|
||||
// host requests TX tri-state be set
|
||||
txTriState_rts, // 1=active (normal), 0=tristate (off)
|
||||
|
||||
setHskoa_setDtr,
|
||||
// host requests HSKOA output be set
|
||||
hskoa_dtr, // 1=on, 0=off
|
||||
|
||||
setPrescaler, // host requests prescalar be set (default: 13)
|
||||
prescaler; // specified as N/8; values 8-ff are valid
|
||||
// must be set any time internal baud rate is set;
|
||||
// must not be set when external clocking is used
|
||||
|
||||
/*
|
||||
3. configuration data which is simply used as is (no overhead,
|
||||
but must be specified correctly in every host message).
|
||||
*/
|
||||
u8 forwardingLength, // forward when this number of chars available
|
||||
reportHskiaChanges_dsrFlowControl,
|
||||
// 1=normal; 0=ignore external clock
|
||||
// 1=use DSR flow control, 0=don't
|
||||
txAckThreshold, // 0=not allowed, 1=normal, 2-255 deliver ACK faster
|
||||
loopbackMode; // 0=no loopback, 1=loopback enabled
|
||||
|
||||
/*
|
||||
4. commands which are flags only; these are processed in order
|
||||
(so that, e.g., if both _txOn and _txOff flags are set, the
|
||||
port ends in a TX_OFF state); any non-zero value is respected
|
||||
*/
|
||||
u8 _txOn, // enable transmitting (and continue if there's data)
|
||||
_txOff, // stop transmitting
|
||||
txFlush, // toss outbound data
|
||||
txBreak, // turn on break (cleared by _txOn)
|
||||
rxOn, // turn on receiver
|
||||
rxOff, // turn off receiver
|
||||
rxFlush, // toss inbound data
|
||||
rxForward, // forward all inbound data, NOW (as if fwdLen==1)
|
||||
returnStatus, // return current status (even if it hasn't changed)
|
||||
resetDataToggle;// reset data toggle state to DATA0
|
||||
|
||||
} keyspan_usa67_portControlMessage;
|
||||
|
||||
// defines for bits in lcr
|
||||
#define USA_DATABITS_5 0x00
|
||||
#define USA_DATABITS_6 0x01
|
||||
#define USA_DATABITS_7 0x02
|
||||
#define USA_DATABITS_8 0x03
|
||||
#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes
|
||||
#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte
|
||||
#define STOPBITS_678_2 0x04 // 2 stop bits for 6/7/8-bit byte
|
||||
#define USA_PARITY_NONE 0x00
|
||||
#define USA_PARITY_ODD 0x08
|
||||
#define USA_PARITY_EVEN 0x18
|
||||
#define PARITY_1 0x28
|
||||
#define PARITY_0 0x38
|
||||
|
||||
// all things called "StatusMessage" are sent on the status endpoint
|
||||
|
||||
typedef struct keyspan_usa67_portStatusMessage // one for each port
|
||||
{
|
||||
u8 port, // 0=first, 1=second, other=see below
|
||||
hskia_cts, // reports HSKIA pin
|
||||
gpia_dcd, // reports GPIA pin
|
||||
_txOff, // port has been disabled (by host)
|
||||
_txXoff, // port is in XOFF state (either host or RX XOFF)
|
||||
txAck, // indicates a TX message acknowledgement
|
||||
rxEnabled, // as configured by rxOn/rxOff 1=on, 0=off
|
||||
controlResponse;// 1=a control message has been processed
|
||||
} keyspan_usa67_portStatusMessage;
|
||||
|
||||
// bits in RX data message when STAT byte is included
|
||||
#define RXERROR_OVERRUN 0x02
|
||||
#define RXERROR_PARITY 0x04
|
||||
#define RXERROR_FRAMING 0x08
|
||||
#define RXERROR_BREAK 0x10
|
||||
|
||||
typedef struct keyspan_usa67_globalControlMessage
|
||||
{
|
||||
u8 port, // 3
|
||||
sendGlobalStatus, // 2=request for two status responses
|
||||
resetStatusToggle, // 1=reset global status toggle
|
||||
resetStatusCount; // a cycling value
|
||||
} keyspan_usa67_globalControlMessage;
|
||||
|
||||
typedef struct keyspan_usa67_globalStatusMessage
|
||||
{
|
||||
u8 port, // 3
|
||||
sendGlobalStatus, // from request, decremented
|
||||
resetStatusCount; // as in request
|
||||
} keyspan_usa67_globalStatusMessage;
|
||||
|
||||
typedef struct keyspan_usa67_globalDebugMessage
|
||||
{
|
||||
u8 port, // 2
|
||||
a,
|
||||
b,
|
||||
c,
|
||||
d;
|
||||
} keyspan_usa67_globalDebugMessage;
|
||||
|
||||
// ie: the maximum length of an FX1 endpoint buffer
|
||||
#define MAX_DATA_LEN 64
|
||||
|
||||
// update status approx. 60 times a second (16.6666 ms)
|
||||
#define STATUS_UPDATE_INTERVAL 16
|
||||
|
||||
// status rationing tuning value (each port gets checked each n ms)
|
||||
#define STATUS_RATION 10
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user