mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-23 04:04:26 +08:00
docs: verify/bisect: fixes, finetuning, and support for Arch
Assorted changes for the recently added document. Improvements: * Add instructions for installing required software on Arch Linux. Fixes: * Move a 'git remote add -t master stable [...]' from a totally wrong to the right place. * Fix two anchors. * Add two required packages to the openSUSE install instructions. Fine tuning: * Improve the reference section about downloading Linux mainline sources to make it more obvious that those are alternatives. * Include the full instructions for git bundles to ensure the remote gets the right name; that way the text also works stand alone. * Install ncurses and qt headers for use of menuconfig and xconfig by default, but tell users that they are free to omit them. * Mention ahead of time which version number are meant as example in commands used during the step-by-step guide. * Mention that 'kernel-install remove' might do a incomplete job. Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <6592c9ef4244faa484b4113f088dbc1beca61015.1709716794.git.linux@leemhuis.info>
This commit is contained in:
Thorsten Leemhuis
Jonathan Corbet
parent
a304fa1d10
commit
0c8e9b538e
@ -192,8 +192,8 @@ will be considered the 'good' release and used to prepare the .config file.
|
||||
|
||||
sudo rm -rf /lib/modules/6.0-rc1-local-gcafec0cacaca0
|
||||
sudo kernel-install -v remove 6.0-rc1-local-gcafec0cacaca0
|
||||
# * Note, if kernel-install is missing, you will have to
|
||||
# manually remove the kernel image and related files.
|
||||
# * Note, on some distributions kernel-install is missing
|
||||
# or does only part of the job.
|
||||
|
||||
b) If you performed a bisection and successfully validated the result, feel
|
||||
free to remove all kernels built during the actual bisection (Segment 3 c);
|
||||
@ -348,11 +348,14 @@ Preparations: set up everything to build your own kernels
|
||||
one downloads less than 500 MByte, the other works better with unreliable
|
||||
internet connections.*
|
||||
|
||||
Execute the following command to retrieve a fresh mainline codebase::
|
||||
Execute the following command to retrieve a fresh mainline codebase while
|
||||
preparing things to add stable/longterm branches later::
|
||||
|
||||
git clone -o mainline --no-checkout \
|
||||
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git ~/linux/
|
||||
cd ~/linux/
|
||||
git remote add -t master stable \
|
||||
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
|
||||
|
||||
[:ref:`details<sources_bisref>`]
|
||||
|
||||
@ -365,7 +368,7 @@ Preparations: set up everything to build your own kernels
|
||||
identifier using ``uname -r``.
|
||||
|
||||
Afterwards check out the source code for the version earlier established as
|
||||
'good' and create a .config file::
|
||||
'good' (in this example this is assumed to be 6.0) and create a .config file::
|
||||
|
||||
git checkout --detach v6.0
|
||||
make olddefconfig
|
||||
@ -462,8 +465,10 @@ Preparations: set up everything to build your own kernels
|
||||
|
||||
[:ref:`details<configmods_distros_bisref>`].
|
||||
|
||||
* If you want to influence other aspects of the configuration, do so now
|
||||
by using make targets like 'menuconfig' or 'xconfig'.
|
||||
* If you want to influence other aspects of the configuration, do so now using
|
||||
your preferred tool. Note, to use make targets like 'menuconfig' or
|
||||
'nconfig', you will need to install the development files of ncurses; for
|
||||
'xconfig' you likewise need the Qt5 or Qt6 headers.
|
||||
|
||||
[:ref:`details<configmods_individual_bisref>`].
|
||||
|
||||
@ -601,8 +606,8 @@ be a waste of time. [:ref:`details<introlatestcheck_bisref>`]
|
||||
* Are you facing a problem within a stable/longterm release, but failed to
|
||||
reproduce it with the mainline kernel you just built? Then check if the latest
|
||||
codebase for the particular series might already fix the problem. To do so,
|
||||
add the stable series Git branch for your 'good' kernel and check out the
|
||||
latest version::
|
||||
add the stable series Git branch for your 'good' kernel (again, this here is
|
||||
assumed to be 6.0) and check out the latest version::
|
||||
|
||||
cd ~/linux/
|
||||
git remote set-branches --add stable linux-6.0.y
|
||||
@ -652,7 +657,7 @@ otherwise would be a waste of time. [:ref:`details<introworkingcheck_bisref>`]
|
||||
regressed works as expected with it.
|
||||
|
||||
Start by checking out the sources for the version earlier established as
|
||||
'good'::
|
||||
'good' (once again assumed to be 6.0 here)::
|
||||
|
||||
cd ~/linux/
|
||||
git checkout --detach v6.0
|
||||
@ -697,15 +702,13 @@ each kernel on commodity x86 machines.
|
||||
stable branch, unless you already did so earlier::
|
||||
|
||||
cd ~/linux/
|
||||
git remote add -t master stable \
|
||||
https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable.git
|
||||
git remote set-branches --add stable linux-6.1.y
|
||||
git fetch stable
|
||||
|
||||
.. _bisectstart_bissbs:
|
||||
|
||||
* Start the bisection and tell Git about the versions earlier established as
|
||||
'good' and 'bad'::
|
||||
'good' (6.0 in the following example command) and 'bad' (6.1.5)::
|
||||
|
||||
cd ~/linux/
|
||||
git bisect start
|
||||
@ -884,8 +887,9 @@ space might run out.
|
||||
|
||||
On quite a few distributions this will delete all other kernel files installed
|
||||
while also removing the kernel's entry from the boot menu. But on some
|
||||
distributions this command does not exist or will fail; in that case consult
|
||||
the reference section, as your Linux distribution needs special care.
|
||||
distributions kernel-install does not exist or leaves boot-loader entries or
|
||||
kernel image and related files behind; in that case remove them as described
|
||||
in the reference section.
|
||||
|
||||
[:ref:`details<makeroom_bisref>`]
|
||||
|
||||
@ -1015,8 +1019,6 @@ the right thing.
|
||||
|
||||
[:ref:`back to step-by-step guide <bootworking_bissbs>`]
|
||||
|
||||
.. _buildrequires_bisref:
|
||||
|
||||
.. _diskspace_bisref:
|
||||
|
||||
Space requirements
|
||||
@ -1060,7 +1062,7 @@ to do this as well, if you tried bisecting between 6.0.11 and 6.1.13.
|
||||
|
||||
[:ref:`back to step-by-step guide <rangecheck_bissbs>`]
|
||||
|
||||
.. _sources_bisref:
|
||||
.. _buildrequires_bisref:
|
||||
|
||||
Install build requirements
|
||||
--------------------------
|
||||
@ -1076,72 +1078,103 @@ about to build.
|
||||
Here are a few examples what you typically need on some mainstream
|
||||
distributions:
|
||||
|
||||
* Arch Linux and derivatives::
|
||||
|
||||
sudo pacman --needed -S bc binutils bison flex gcc git kmod libelf openssl \
|
||||
pahole perl zlib ncurses qt6-base
|
||||
|
||||
* Debian, Ubuntu, and derivatives::
|
||||
|
||||
sudo apt install bc binutils bison dwarves flex gcc git make openssl \
|
||||
pahole perl-base libssl-dev libelf-dev
|
||||
sudo apt install bc binutils bison dwarves flex gcc git kmod libelf-dev \
|
||||
libssl-dev make openssl pahole perl-base pkg-config zlib1g-dev \
|
||||
libncurses-dev qt6-base-dev g++
|
||||
|
||||
* Fedora and derivatives::
|
||||
|
||||
sudo dnf install binutils /usr/include/{libelf.h,openssl/pkcs7.h} \
|
||||
/usr/bin/{bc,bison,flex,gcc,git,openssl,make,perl,pahole}
|
||||
sudo dnf install binutils \
|
||||
/usr/bin/{bc,bison,flex,gcc,git,openssl,make,perl,pahole,rpmbuild} \
|
||||
/usr/include/{libelf.h,openssl/pkcs7.h,zlib.h,ncurses.h,qt6/QtGui/QAction}
|
||||
|
||||
* openSUSE and derivatives::
|
||||
|
||||
sudo zypper install bc binutils bison dwarves flex gcc git make perl-base \
|
||||
openssl openssl-devel libelf-dev
|
||||
sudo zypper install bc binutils bison dwarves flex gcc git \
|
||||
kernel-install-tools libelf-devel make modutils openssl openssl-devel \
|
||||
perl-base zlib-devel rpm-build ncurses-devel qt6-base-devel
|
||||
|
||||
In case you wonder why these lists include openssl and its development headers:
|
||||
they are needed for the Secure Boot support, which many distributions enable in
|
||||
their kernel configuration for x86 machines.
|
||||
|
||||
Sometimes you will need tools for compression formats like bzip2, gzip, lz4,
|
||||
lzma, lzo, xz, or zstd as well.
|
||||
|
||||
In case you want to adjust the build configuration with make targets like
|
||||
'menuconfig' or 'xconfig' later, ensure to also install development headers for
|
||||
ncurses and Qt5.
|
||||
These commands install a few packages that are often, but not always needed. You
|
||||
for example might want to skip installing the development headers for ncurses,
|
||||
which you will only need in case you later might want to adjust the kernel build
|
||||
configuration using make the targets 'menuconfig' or 'nconfig'; likewise omit
|
||||
the headers of Qt6 is you do not plan to adjust the .config using 'xconfig'.
|
||||
|
||||
You furthermore might need additional libraries and their development headers
|
||||
for tasks not covered in this guide. For example, zlib will be needed when
|
||||
building kernel tools from the tools/ directory;.
|
||||
for tasks not covered in this guide -- for example when building utilities from
|
||||
the kernel's tools/ directory.
|
||||
|
||||
[:ref:`back to step-by-step guide <buildrequires_bissbs>`]
|
||||
|
||||
Download the sources using git
|
||||
.. _sources_bisref:
|
||||
|
||||
Download the sources using Git
|
||||
------------------------------
|
||||
|
||||
*Retrieve the Linux mainline sources.*
|
||||
[:ref:`...<sources_bissbs>`]
|
||||
|
||||
The step-by-step guide outlines how to retrieve the Linux sources using a full
|
||||
Git clone of Linus' mainline repository. If you have an unreliable internet
|
||||
connection, you instead might want to use a 'Git bundle' to retrieve the
|
||||
sources; if downloading the complete repository would take too long or requires
|
||||
too much storage space, use a shallow clone instead.
|
||||
The step-by-step guide outlines how to download the Linux sources using a full
|
||||
Git clone of Linus' mainline repository. There is nothing more to say about
|
||||
that -- but there are two alternatives ways to retrieve the sources that might
|
||||
work better for you:
|
||||
|
||||
Downloading Linux mainline using a bundle
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
* If you have an unreliable internet connection, consider
|
||||
:ref:`using a 'Git bundle'<sources_bundle_bisref>`.
|
||||
|
||||
Switch to you home directory and follow the instructions `kernel.org provides
|
||||
for this case <https://www.kernel.org/cloning-linux-from-a-bundle.html>`_.
|
||||
* If downloading the complete repository would take too long or requires too
|
||||
much storage space, consider :ref:`using a 'shallow
|
||||
clone'<sources_shallow_bisref>`.
|
||||
|
||||
Afterwards add the stable Git repository as remote and all required
|
||||
stable/branches as explained in the step-by-step guide.
|
||||
.. _sources_bundle_bisref:
|
||||
|
||||
Downloading Linux mainline using a shallow clone
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
Downloading Linux mainline sources using a bundle
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
Use the following commands to retrieve the Linux mainline sources using a
|
||||
bundle::
|
||||
|
||||
wget -c \
|
||||
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/clone.bundle
|
||||
git clone --no-checkout clone.bundle ~/linux/
|
||||
cd ~/linux/
|
||||
git remote remove origin
|
||||
git remote add mainline \
|
||||
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
|
||||
git fetch mainline
|
||||
git remote add -t master stable \
|
||||
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
|
||||
|
||||
In case the 'wget' command fails, just re-execute it, it will pick up where
|
||||
it left off.
|
||||
|
||||
[:ref:`back to step-by-step guide <sources_bissbs>`]
|
||||
[:ref:`back to section intro <sources_bisref>`]
|
||||
|
||||
.. _sources_shallow_bisref:
|
||||
|
||||
Downloading Linux mainline sources using a shallow clone
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
First, execute the following command to retrieve the latest mainline codebase::
|
||||
|
||||
git clone -o mainline --no-checkout --depth 1 -b master \
|
||||
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git ~/linux/
|
||||
cd ~/linux/
|
||||
git remote add -t master stable \
|
||||
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
|
||||
|
||||
Now deepen your clone's history to the second predecessor of the mainline
|
||||
release of your 'good' version. In case the latter are 6.0 or 6.0.11, 5.19 would
|
||||
be the first predecessor and 5.18 the second -- hence deepen the history up to
|
||||
the latter::
|
||||
that version::
|
||||
|
||||
git fetch --shallow-exclude=v5.18 mainline
|
||||
|
||||
@ -1150,7 +1183,7 @@ branches as explained in the step-by-step guide.
|
||||
|
||||
Note, shallow clones have a few peculiar characteristics:
|
||||
|
||||
* For bisections the history needs to be deepend a few mainline versions
|
||||
* For bisections the history needs to be deepened a few mainline versions
|
||||
farther than it seems necessary, as explained above already. That's because
|
||||
Git otherwise will be unable to revert or describe most of the commits within
|
||||
a range (say v6.1..v6.2), as they are internally based on earlier kernels
|
||||
|
||||
Loading…
Reference in New Issue
Block a user