diff --git a/CREDITS b/CREDITS
index 5b1edf3a38a2..7fb4c73e0228 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3642,11 +3642,9 @@ S: Beaverton, OR 97005
S: USA
N: Michal Wronski
-E: wrona@mat.uni.torun.pl
-W: http://www.mat.uni.torun.pl/~wrona
+E: Michal.Wronski@motorola.com
D: POSIX message queues fs (with K. Benedyczak)
-S: ul. Teczowa 23/12
-S: 80-680 Gdansk-Sobieszewo
+S: Krakow
S: Poland
N: Frank Xia
diff --git a/Documentation/Changes b/Documentation/Changes
index 783ddc3ce4e8..86b86399d61d 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -139,9 +139,14 @@ You'll probably want to upgrade.
Ksymoops
--------
-If the unthinkable happens and your kernel oopses, you'll need a 2.4
-version of ksymoops to decode the report; see REPORTING-BUGS in the
-root of the Linux source for more information.
+If the unthinkable happens and your kernel oopses, you may need the
+ksymoops tool to decode it, but in most cases you don't.
+In the 2.6 kernel it is generally preferred to build the kernel with
+CONFIG_KALLSYMS so that it produces readable dumps that can be used as-is
+(this also produces better output than ksymoops).
+If for some reason your kernel is not build with CONFIG_KALLSYMS and
+you have no way to rebuild and reproduce the Oops with that option, then
+you can still decode that Oops with ksymoops.
Module-Init-Tools
-----------------
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index fa3e29ad8a46..7018f5c6a447 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -10,7 +10,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml \
sis900.xml kernel-api.xml journal-api.xml lsm.xml usb.xml \
- gadget.xml libata.xml mtdnand.xml librs.xml
+ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml
###
# The build process is as follows (targets):
diff --git a/Documentation/DocBook/journal-api.tmpl b/Documentation/DocBook/journal-api.tmpl
index 341aaa4ce481..2077f9a28c19 100644
--- a/Documentation/DocBook/journal-api.tmpl
+++ b/Documentation/DocBook/journal-api.tmpl
@@ -306,7 +306,7 @@ an example.
Journal Level
!Efs/jbd/journal.c
-!Efs/jbd/recovery.c
+!Ifs/jbd/recovery.c
Transasction Level
!Efs/jbd/transaction.c
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 4d9b66d8b4db..a8316b1a3e3d 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -118,7 +118,7 @@ X!Ilib/string.c
User Space Memory Access
!Iinclude/asm-i386/uaccess.h
-!Iarch/i386/lib/usercopy.c
+!Earch/i386/lib/usercopy.c
More Memory Management Functions
!Iinclude/linux/rmap.h
@@ -174,7 +174,6 @@ X!Ilib/string.c
The Linux VFS
The Filesystem types
!Iinclude/linux/fs.h
-!Einclude/linux/fs.h
The Directory Cache
!Efs/dcache.c
@@ -239,9 +238,9 @@ X!Ilib/string.c
Network device support
Driver Support
!Enet/core/dev.c
-
- 8390 Based Network Cards
-!Edrivers/net/8390.c
+!Enet/ethernet/eth.c
+!Einclude/linux/etherdevice.h
+!Enet/core/wireless.c
Synchronous PPP
!Edrivers/net/wan/syncppp.c
@@ -266,7 +265,7 @@ X!Ekernel/module.c
Hardware Interfaces
Interrupt Handling
-!Ikernel/irq/manage.c
+!Ekernel/irq/manage.c
Resources Management
@@ -501,7 +500,7 @@ KAO -->
!Edrivers/video/modedb.c
Frame Buffer Macintosh Video Mode Database
-!Idrivers/video/macmodes.c
+!Edrivers/video/macmodes.c
Frame Buffer Fonts
diff --git a/Documentation/DocBook/rapidio.tmpl b/Documentation/DocBook/rapidio.tmpl
new file mode 100644
index 000000000000..1becf27ba27e
--- /dev/null
+++ b/Documentation/DocBook/rapidio.tmpl
@@ -0,0 +1,160 @@
+
+
+ ]>
+
+
+
+ RapidIO Subsystem Guide
+
+
+
+ Matt
+ Porter
+
+
+ mporter@kernel.crashing.org
+ mporter@mvista.com
+
+
+
+
+
+
+ 2005
+ MontaVista Software, Inc.
+
+
+
+
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License version 2 as published by the Free Software Foundation.
+
+
+
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
+
+
+
+ You should have received a copy of the GNU General Public
+ License along with this program; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ MA 02111-1307 USA
+
+
+
+ For more details see the file COPYING in the source
+ distribution of Linux.
+
+
+
+
+
+
+
+ Introduction
+
+ RapidIO is a high speed switched fabric interconnect with
+ features aimed at the embedded market. RapidIO provides
+ support for memory-mapped I/O as well as message-based
+ transactions over the switched fabric network. RapidIO has
+ a standardized discovery mechanism not unlike the PCI bus
+ standard that allows simple detection of devices in a
+ network.
+
+
+ This documentation is provided for developers intending
+ to support RapidIO on new architectures, write new drivers,
+ or to understand the subsystem internals.
+
+
+
+
+ Known Bugs and Limitations
+
+
+ Bugs
+ None. ;)
+
+
+ Limitations
+
+
+ Access/management of RapidIO memory regions is not supported
+ Multiple host enumeration is not supported
+
+
+
+
+
+
+ RapidIO driver interface
+
+ Drivers are provided a set of calls in order
+ to interface with the subsystem to gather info
+ on devices, request/map memory region resources,
+ and manage mailboxes/doorbells.
+
+
+ Functions
+!Iinclude/linux/rio_drv.h
+!Edrivers/rapidio/rio-driver.c
+!Edrivers/rapidio/rio.c
+
+
+
+
+ Internals
+
+
+ This chapter contains the autogenerated documentation of the RapidIO
+ subsystem.
+
+
+ Structures
+!Iinclude/linux/rio.h
+
+ Enumeration and Discovery
+!Idrivers/rapidio/rio-scan.c
+
+ Driver functionality
+!Idrivers/rapidio/rio.c
+!Idrivers/rapidio/rio-access.c
+
+ Device model support
+!Idrivers/rapidio/rio-driver.c
+
+ Sysfs support
+!Idrivers/rapidio/rio-sysfs.c
+
+ PPC32 support
+!Iarch/ppc/kernel/rio.c
+!Earch/ppc/syslib/ppc85xx_rio.c
+!Iarch/ppc/syslib/ppc85xx_rio.c
+
+
+
+
+ Credits
+
+ The following people have contributed to the RapidIO
+ subsystem directly or indirectly:
+
+ Matt Portermporter@kernel.crashing.org
+ Randy Vinsonrvinson@mvista.com
+ Dan Malekdan@embeddedalley.com
+
+
+
+ The following people have contributed to this document:
+
+ Matt Portermporter@kernel.crashing.org
+
+
+
+
diff --git a/Documentation/MSI-HOWTO.txt b/Documentation/MSI-HOWTO.txt
index 63edc5f847c4..3ec6c720b016 100644
--- a/Documentation/MSI-HOWTO.txt
+++ b/Documentation/MSI-HOWTO.txt
@@ -10,14 +10,22 @@
This guide describes the basics of Message Signaled Interrupts (MSI),
the advantages of using MSI over traditional interrupt mechanisms,
and how to enable your driver to use MSI or MSI-X. Also included is
-a Frequently Asked Questions.
+a Frequently Asked Questions (FAQ) section.
+
+1.1 Terminology
+
+PCI devices can be single-function or multi-function. In either case,
+when this text talks about enabling or disabling MSI on a "device
+function," it is referring to one specific PCI device and function and
+not to all functions on a PCI device (unless the PCI device has only
+one function).
2. Copyright 2003 Intel Corporation
3. What is MSI/MSI-X?
Message Signaled Interrupt (MSI), as described in the PCI Local Bus
-Specification Revision 2.3 or latest, is an optional feature, and a
+Specification Revision 2.3 or later, is an optional feature, and a
required feature for PCI Express devices. MSI enables a device function
to request service by sending an Inbound Memory Write on its PCI bus to
the FSB as a Message Signal Interrupt transaction. Because MSI is
@@ -27,7 +35,7 @@ supported.
A PCI device that supports MSI must also support pin IRQ assertion
interrupt mechanism to provide backward compatibility for systems that
-do not support MSI. In Systems, which support MSI, the bus driver is
+do not support MSI. In systems which support MSI, the bus driver is
responsible for initializing the message address and message data of
the device function's MSI/MSI-X capability structure during device
initial configuration.
@@ -61,17 +69,17 @@ over the MSI capability structure as described below.
- MSI and MSI-X both support per-vector masking. Per-vector
masking is an optional extension of MSI but a required
- feature for MSI-X. Per-vector masking provides the kernel
- the ability to mask/unmask MSI when servicing its software
- interrupt service routing handler. If per-vector masking is
+ feature for MSI-X. Per-vector masking provides the kernel the
+ ability to mask/unmask a single MSI while running its
+ interrupt service routine. If per-vector masking is
not supported, then the device driver should provide the
hardware/software synchronization to ensure that the device
generates MSI when the driver wants it to do so.
4. Why use MSI?
-As a benefit the simplification of board design, MSI allows board
-designers to remove out of band interrupt routing. MSI is another
+As a benefit to the simplification of board design, MSI allows board
+designers to remove out-of-band interrupt routing. MSI is another
step towards a legacy-free environment.
Due to increasing pressure on chipset and processor packages to
@@ -87,7 +95,7 @@ support. As a result, the PCI Express technology requires MSI
support for better interrupt performance.
Using MSI enables the device functions to support two or more
-vectors, which can be configured to target different CPU's to
+vectors, which can be configured to target different CPUs to
increase scalability.
5. Configuring a driver to use MSI/MSI-X
@@ -119,13 +127,13 @@ pci_enable_msi() explicitly.
int pci_enable_msi(struct pci_dev *dev)
-With this new API, any existing device driver, which like to have
-MSI enabled on its device function, must call this API to enable MSI
+With this new API, a device driver that wants to have MSI
+enabled on its device function must call this API to enable MSI.
A successful call will initialize the MSI capability structure
with ONE vector, regardless of whether a device function is
capable of supporting multiple messages. This vector replaces the
-pre-assigned dev->irq with a new MSI vector. To avoid the conflict
-of new assigned vector with existing pre-assigned vector requires
+pre-assigned dev->irq with a new MSI vector. To avoid a conflict
+of the new assigned vector with existing pre-assigned vector requires
a device driver to call this API before calling request_irq().
5.2.2 API pci_disable_msi
@@ -137,14 +145,14 @@ when a device driver is unloading. This API restores dev->irq with
the pre-assigned IOAPIC vector and switches a device's interrupt
mode to PCI pin-irq assertion/INTx emulation mode.
-Note that a device driver should always call free_irq() on MSI vector
-it has done request_irq() on before calling this API. Failure to do
-so results a BUG_ON() and a device will be left with MSI enabled and
+Note that a device driver should always call free_irq() on the MSI vector
+that it has done request_irq() on before calling this API. Failure to do
+so results in a BUG_ON() and a device will be left with MSI enabled and
leaks its vector.
5.2.3 MSI mode vs. legacy mode diagram
-The below diagram shows the events, which switches the interrupt
+The below diagram shows the events which switch the interrupt
mode on the MSI-capable device function between MSI mode and
PIN-IRQ assertion mode.
@@ -155,9 +163,9 @@ PIN-IRQ assertion mode.
------------ pci_disable_msi ------------------------
-Figure 1.0 MSI Mode vs. Legacy Mode
+Figure 1. MSI Mode vs. Legacy Mode
-In Figure 1.0, a device operates by default in legacy mode. Legacy
+In Figure 1, a device operates by default in legacy mode. Legacy
in this context means PCI pin-irq assertion or PCI-Express INTx
emulation. A successful MSI request (using pci_enable_msi()) switches
a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector
@@ -166,11 +174,11 @@ assigned MSI vector will replace dev->irq.
To return back to its default mode, a device driver should always call
pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a
-device driver should always call free_irq() on MSI vector it has done
-request_irq() on before calling pci_disable_msi(). Failure to do so
-results a BUG_ON() and a device will be left with MSI enabled and
+device driver should always call free_irq() on the MSI vector it has
+done request_irq() on before calling pci_disable_msi(). Failure to do
+so results in a BUG_ON() and a device will be left with MSI enabled and
leaks its vector. Otherwise, the PCI subsystem restores a device's
-dev->irq with a pre-assigned IOAPIC vector and marks released
+dev->irq with a pre-assigned IOAPIC vector and marks the released
MSI vector as unused.
Once being marked as unused, there is no guarantee that the PCI
@@ -178,8 +186,8 @@ subsystem will reserve this MSI vector for a device. Depending on
the availability of current PCI vector resources and the number of
MSI/MSI-X requests from other drivers, this MSI may be re-assigned.
-For the case where the PCI subsystem re-assigned this MSI vector
-another driver, a request to switching back to MSI mode may result
+For the case where the PCI subsystem re-assigns this MSI vector to
+another driver, a request to switch back to MSI mode may result
in being assigned a different MSI vector or a failure if no more
vectors are available.
@@ -208,12 +216,12 @@ Unlike the function pci_enable_msi(), the function pci_enable_msix()
does not replace the pre-assigned IOAPIC dev->irq with a new MSI
vector because the PCI subsystem writes the 1:1 vector-to-entry mapping
into the field vector of each element contained in a second argument.
-Note that the pre-assigned IO-APIC dev->irq is valid only if the device
-operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt of
+Note that the pre-assigned IOAPIC dev->irq is valid only if the device
+operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at
using dev->irq by the device driver to request for interrupt service
may result unpredictabe behavior.
-For each MSI-X vector granted, a device driver is responsible to call
+For each MSI-X vector granted, a device driver is responsible for calling
other functions like request_irq(), enable_irq(), etc. to enable
this vector with its corresponding interrupt service handler. It is
a device driver's choice to assign all vectors with the same
@@ -224,13 +232,13 @@ service handler.
The PCI 3.0 specification has implementation notes that MMIO address
space for a device's MSI-X structure should be isolated so that the
-software system can set different page for controlling accesses to
-the MSI-X structure. The implementation of MSI patch requires the PCI
+software system can set different pages for controlling accesses to the
+MSI-X structure. The implementation of MSI support requires the PCI
subsystem, not a device driver, to maintain full control of the MSI-X
-table/MSI-X PBA and MMIO address space of the MSI-X table/MSI-X PBA.
-A device driver is prohibited from requesting the MMIO address space
-of the MSI-X table/MSI-X PBA. Otherwise, the PCI subsystem will fail
-enabling MSI-X on its hardware device when it calls the function
+table/MSI-X PBA (Pending Bit Array) and MMIO address space of the MSI-X
+table/MSI-X PBA. A device driver is prohibited from requesting the MMIO
+address space of the MSI-X table/MSI-X PBA. Otherwise, the PCI subsystem
+will fail enabling MSI-X on its hardware device when it calls the function
pci_enable_msix().
5.3.2 Handling MSI-X allocation
@@ -274,9 +282,9 @@ For the case where fewer MSI-X vectors are allocated to a function
than requested, the function pci_enable_msix() will return the
maximum number of MSI-X vectors available to the caller. A device
driver may re-send its request with fewer or equal vectors indicated
-in a return. For example, if a device driver requests 5 vectors, but
-the number of available vectors is 3 vectors, a value of 3 will be a
-return as a result of pci_enable_msix() call. A function could be
+in the return. For example, if a device driver requests 5 vectors, but
+the number of available vectors is 3 vectors, a value of 3 will be
+returned as a result of pci_enable_msix() call. A function could be
designed for its driver to use only 3 MSI-X table entries as
different combinations as ABC--, A-B-C, A--CB, etc. Note that this
patch does not support multiple entries with the same vector. Such
@@ -285,49 +293,46 @@ as ABBCC, AABCC, BCCBA, etc will result as a failure by the function
pci_enable_msix(). Below are the reasons why supporting multiple
entries with the same vector is an undesirable solution.
- - The PCI subsystem can not determine which entry, which
- generated the message, to mask/unmask MSI while handling
+ - The PCI subsystem cannot determine the entry that
+ generated the message to mask/unmask MSI while handling
software driver ISR. Attempting to walk through all MSI-X
table entries (2048 max) to mask/unmask any match vector
is an undesirable solution.
- - Walk through all MSI-X table entries (2048 max) to handle
+ - Walking through all MSI-X table entries (2048 max) to handle
SMP affinity of any match vector is an undesirable solution.
5.3.4 API pci_enable_msix
-int pci_enable_msix(struct pci_dev *dev, u32 *entries, int nvec)
+int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
This API enables a device driver to request the PCI subsystem
-for enabling MSI-X messages on its hardware device. Depending on
+to enable MSI-X messages on its hardware device. Depending on
the availability of PCI vectors resources, the PCI subsystem enables
-either all or nothing.
+either all or none of the requested vectors.
-Argument dev points to the device (pci_dev) structure.
+Argument 'dev' points to the device (pci_dev) structure.
-Argument entries is a pointer of unsigned integer type. The number of
-elements is indicated in argument nvec. The content of each element
-will be mapped to the following struct defined in /driver/pci/msi.h.
+Argument 'entries' is a pointer to an array of msix_entry structs.
+The number of entries is indicated in argument 'nvec'.
+struct msix_entry is defined in /driver/pci/msi.h:
struct msix_entry {
u16 vector; /* kernel uses to write alloc vector */
u16 entry; /* driver uses to specify entry */
};
-A device driver is responsible for initializing the field entry of
-each element with unique entry supported by MSI-X table. Otherwise,
+A device driver is responsible for initializing the field 'entry' of
+each element with a unique entry supported by MSI-X table. Otherwise,
-EINVAL will be returned as a result. A successful return of zero
-indicates the PCI subsystem completes initializing each of requested
+indicates the PCI subsystem completed initializing each of the requested
entries of the MSI-X table with message address and message data.
Last but not least, the PCI subsystem will write the 1:1
-vector-to-entry mapping into the field vector of each element. A
-device driver is responsible of keeping track of allocated MSI-X
+vector-to-entry mapping into the field 'vector' of each element. A
+device driver is responsible for keeping track of allocated MSI-X
vectors in its internal data structure.
-Argument nvec is an integer indicating the number of messages
-requested.
-
-A return of zero indicates that the number of MSI-X vectors is
+A return of zero indicates that the number of MSI-X vectors was
successfully allocated. A return of greater than zero indicates
MSI-X vector shortage. Or a return of less than zero indicates
a failure. This failure may be a result of duplicate entries
@@ -341,12 +346,12 @@ void pci_disable_msix(struct pci_dev *dev)
This API should always be used to undo the effect of pci_enable_msix()
when a device driver is unloading. Note that a device driver should
always call free_irq() on all MSI-X vectors it has done request_irq()
-on before calling this API. Failure to do so results a BUG_ON() and
+on before calling this API. Failure to do so results in a BUG_ON() and
a device will be left with MSI-X enabled and leaks its vectors.
5.3.6 MSI-X mode vs. legacy mode diagram
-The below diagram shows the events, which switches the interrupt
+The below diagram shows the events which switch the interrupt
mode on the MSI-X capable device function between MSI-X mode and
PIN-IRQ assertion mode (legacy).
@@ -356,22 +361,22 @@ PIN-IRQ assertion mode (legacy).
| | ===============> | |
------------ pci_disable_msix ------------------------
-Figure 2.0 MSI-X Mode vs. Legacy Mode
+Figure 2. MSI-X Mode vs. Legacy Mode
-In Figure 2.0, a device operates by default in legacy mode. A
+In Figure 2, a device operates by default in legacy mode. A
successful MSI-X request (using pci_enable_msix()) switches a
device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector
stored in dev->irq will be saved by the PCI subsystem; however,
unlike MSI mode, the PCI subsystem will not replace dev->irq with
assigned MSI-X vector because the PCI subsystem already writes the 1:1
-vector-to-entry mapping into the field vector of each element
+vector-to-entry mapping into the field 'vector' of each element
specified in second argument.
To return back to its default mode, a device driver should always call
pci_disable_msix() to undo the effect of pci_enable_msix(). Note that
a device driver should always call free_irq() on all MSI-X vectors it
has done request_irq() on before calling pci_disable_msix(). Failure
-to do so results a BUG_ON() and a device will be left with MSI-X
+to do so results in a BUG_ON() and a device will be left with MSI-X
enabled and leaks its vectors. Otherwise, the PCI subsystem switches a
device function's interrupt mode from MSI-X mode to legacy mode and
marks all allocated MSI-X vectors as unused.
@@ -383,53 +388,56 @@ MSI/MSI-X requests from other drivers, these MSI-X vectors may be
re-assigned.
For the case where the PCI subsystem re-assigned these MSI-X vectors
-to other driver, a request to switching back to MSI-X mode may result
+to other drivers, a request to switch back to MSI-X mode may result
being assigned with another set of MSI-X vectors or a failure if no
more vectors are available.
-5.4 Handling function implementng both MSI and MSI-X capabilities
+5.4 Handling function implementing both MSI and MSI-X capabilities
For the case where a function implements both MSI and MSI-X
capabilities, the PCI subsystem enables a device to run either in MSI
mode or MSI-X mode but not both. A device driver determines whether it
wants MSI or MSI-X enabled on its hardware device. Once a device
-driver requests for MSI, for example, it is prohibited to request for
+driver requests for MSI, for example, it is prohibited from requesting
MSI-X; in other words, a device driver is not permitted to ping-pong
between MSI mod MSI-X mode during a run-time.
5.5 Hardware requirements for MSI/MSI-X support
+
MSI/MSI-X support requires support from both system hardware and
individual hardware device functions.
5.5.1 System hardware support
+
Since the target of MSI address is the local APIC CPU, enabling
-MSI/MSI-X support in Linux kernel is dependent on whether existing
-system hardware supports local APIC. Users should verify their
-system whether it runs when CONFIG_X86_LOCAL_APIC=y.
+MSI/MSI-X support in the Linux kernel is dependent on whether existing
+system hardware supports local APIC. Users should verify that their
+system supports local APIC operation by testing that it runs when
+CONFIG_X86_LOCAL_APIC=y.
In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set;
however, in UP environment, users must manually set
CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting
-CONFIG_PCI_MSI enables the VECTOR based scheme and
-the option for MSI-capable device drivers to selectively enable
-MSI/MSI-X.
+CONFIG_PCI_MSI enables the VECTOR based scheme and the option for
+MSI-capable device drivers to selectively enable MSI/MSI-X.
Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X
vector is allocated new during runtime and MSI/MSI-X support does not
depend on BIOS support. This key independency enables MSI/MSI-X
-support on future IOxAPIC free platform.
+support on future IOxAPIC free platforms.
5.5.2 Device hardware support
+
The hardware device function supports MSI by indicating the
MSI/MSI-X capability structure on its PCI capability list. By
default, this capability structure will not be initialized by
the kernel to enable MSI during the system boot. In other words,
the device function is running on its default pin assertion mode.
Note that in many cases the hardware supporting MSI have bugs,
-which may result in system hang. The software driver of specific
-MSI-capable hardware is responsible for whether calling
+which may result in system hangs. The software driver of specific
+MSI-capable hardware is responsible for deciding whether to call
pci_enable_msi or not. A return of zero indicates the kernel
-successfully initializes the MSI/MSI-X capability structure of the
+successfully initialized the MSI/MSI-X capability structure of the
device function. The device function is now running on MSI/MSI-X mode.
5.6 How to tell whether MSI/MSI-X is enabled on device function
@@ -439,10 +447,10 @@ pci_enable_msi()/pci_enable_msix() indicates to a device driver that
its device function is initialized successfully and ready to run in
MSI/MSI-X mode.
-At the user level, users can use command 'cat /proc/interrupts'
-to display the vector allocated for a device and its interrupt
-MSI/MSI-X mode ("PCI MSI"/"PCI MSIX"). Below shows below MSI mode is
-enabled on a SCSI Adaptec 39320D Ultra320.
+At the user level, users can use the command 'cat /proc/interrupts'
+to display the vectors allocated for devices and their interrupt
+MSI/MSI-X modes ("PCI-MSI"/"PCI-MSI-X"). Below shows MSI mode is
+enabled on a SCSI Adaptec 39320D Ultra320 controller.
CPU0 CPU1
0: 324639 0 IO-APIC-edge timer
@@ -453,8 +461,8 @@ enabled on a SCSI Adaptec 39320D Ultra320.
15: 1 0 IO-APIC-edge ide1
169: 0 0 IO-APIC-level uhci-hcd
185: 0 0 IO-APIC-level uhci-hcd
-193: 138 10 PCI MSI aic79xx
-201: 30 0 PCI MSI aic79xx
+193: 138 10 PCI-MSI aic79xx
+201: 30 0 PCI-MSI aic79xx
225: 30 0 IO-APIC-level aic7xxx
233: 30 0 IO-APIC-level aic7xxx
NMI: 0 0
@@ -490,8 +498,8 @@ target address set as 0xfeexxxxx, as conformed to PCI
specification 2.3 or latest, then it should work.
Q4. From the driver point of view, if the MSI is lost because
-of the errors occur during inbound memory write, then it may
-wait for ever. Is there a mechanism for it to recover?
+of errors occurring during inbound memory write, then it may
+wait forever. Is there a mechanism for it to recover?
A4. Since the target of the transaction is an inbound memory
write, all transaction termination conditions (Retry,
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index 354d89c78377..15da16861fa3 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -772,8 +772,6 @@ RCU pointer/list traversal:
list_for_each_entry_rcu
list_for_each_continue_rcu (to be deprecated in favor of new
list_for_each_entry_continue_rcu)
- hlist_for_each_rcu (to be deprecated in favor of
- hlist_for_each_entry_rcu)
hlist_for_each_entry_rcu
RCU pointer update:
diff --git a/Documentation/arm/README b/Documentation/arm/README
index a6f718e90a86..5ed6f3530b86 100644
--- a/Documentation/arm/README
+++ b/Documentation/arm/README
@@ -8,10 +8,9 @@ Compilation of kernel
---------------------
In order to compile ARM Linux, you will need a compiler capable of
- generating ARM ELF code with GNU extensions. GCC 2.95.1, EGCS
- 1.1.2, and GCC 3.3 are known to be good compilers. Fortunately, you
- needn't guess. The kernel will report an error if your compiler is
- a recognized offender.
+ generating ARM ELF code with GNU extensions. GCC 3.3 is known to be
+ a good compiler. Fortunately, you needn't guess. The kernel will report
+ an error if your compiler is a recognized offender.
To build ARM Linux natively, you shouldn't have to alter the ARCH = line
in the top level Makefile. However, if you don't have the ARM Linux ELF
diff --git a/Documentation/device-mapper/snapshot.txt b/Documentation/device-mapper/snapshot.txt
index dca274ff4005..a5009c8300f3 100644
--- a/Documentation/device-mapper/snapshot.txt
+++ b/Documentation/device-mapper/snapshot.txt
@@ -19,7 +19,6 @@ There are two dm targets available: snapshot and snapshot-origin.
*) snapshot-origin
which will normally have one or more snapshots based on it.
-You must create the snapshot-origin device before you can create snapshots.
Reads will be mapped directly to the backing device. For each write, the
original data will be saved in the of each snapshot to keep
its visible content unchanged, at least until the fills up.
@@ -27,7 +26,7 @@ its visible content unchanged, at least until the fills up.
*) snapshot
-A snapshot is created of the block device. Changed chunks of
+A snapshot of the block device is created. Changed chunks of
sectors will be stored on the . Writes will
only go to the . Reads will come from the or
from for unchanged data. will often be
@@ -37,6 +36,8 @@ the amount of free space and expand the before it fills up.
is P (Persistent) or N (Not persistent - will not survive
after reboot).
+The difference is that for transient snapshots less metadata must be
+saved on disk - they can be kept in memory by the kernel.
How this is used by LVM2
diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt
index 62db6758d1c1..ee277dd204b0 100644
--- a/Documentation/fb/vesafb.txt
+++ b/Documentation/fb/vesafb.txt
@@ -146,10 +146,10 @@ pmipal Use the protected mode interface for palette changes.
mtrr:n setup memory type range registers for the vesafb framebuffer
where n:
- 0 - disabled (equivalent to nomtrr)
+ 0 - disabled (equivalent to nomtrr) (default)
1 - uncachable
2 - write-back
- 3 - write-combining (default)
+ 3 - write-combining
4 - write-through
If you see the following in dmesg, choose the type that matches the
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index b67189a8d8d4..decdf9917e0d 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -69,6 +69,22 @@ Who: Grant Coady
---------------------------
+What: remove EXPORT_SYMBOL(panic_timeout)
+When: April 2006
+Files: kernel/panic.c
+Why: No modular usage in the kernel.
+Who: Adrian Bunk
+
+---------------------------
+
+What: remove EXPORT_SYMBOL(insert_resource)
+When: April 2006
+Files: kernel/resource.c
+Why: No modular usage in the kernel.
+Who: Adrian Bunk
+
+---------------------------
+
What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
When: November 2005
Files: drivers/pcmcia/: pcmcia_ioctl.c
diff --git a/Documentation/filesystems/dentry-locking.txt b/Documentation/filesystems/dentry-locking.txt
new file mode 100644
index 000000000000..4c0c575a4012
--- /dev/null
+++ b/Documentation/filesystems/dentry-locking.txt
@@ -0,0 +1,173 @@
+RCU-based dcache locking model
+==============================
+
+On many workloads, the most common operation on dcache is to look up a
+dentry, given a parent dentry and the name of the child. Typically,
+for every open(), stat() etc., the dentry corresponding to the
+pathname will be looked up by walking the tree starting with the first
+component of the pathname and using that dentry along with the next
+component to look up the next level and so on. Since it is a frequent
+operation for workloads like multiuser environments and web servers,
+it is important to optimize this path.
+
+Prior to 2.5.10, dcache_lock was acquired in d_lookup and thus in
+every component during path look-up. Since 2.5.10 onwards, fast-walk
+algorithm changed this by holding the dcache_lock at the beginning and
+walking as many cached path component dentries as possible. This
+significantly decreases the number of acquisition of
+dcache_lock. However it also increases the lock hold time
+significantly and affects performance in large SMP machines. Since
+2.5.62 kernel, dcache has been using a new locking model that uses RCU
+to make dcache look-up lock-free.
+
+The current dcache locking model is not very different from the
+existing dcache locking model. Prior to 2.5.62 kernel, dcache_lock
+protected the hash chain, d_child, d_alias, d_lru lists as well as
+d_inode and several other things like mount look-up. RCU-based changes
+affect only the way the hash chain is protected. For everything else
+the dcache_lock must be taken for both traversing as well as
+updating. The hash chain updates too take the dcache_lock. The
+significant change is the way d_lookup traverses the hash chain, it
+doesn't acquire the dcache_lock for this and rely on RCU to ensure
+that the dentry has not been *freed*.
+
+
+Dcache locking details
+======================
+
+For many multi-user workloads, open() and stat() on files are very
+frequently occurring operations. Both involve walking of path names to
+find the dentry corresponding to the concerned file. In 2.4 kernel,
+dcache_lock was held during look-up of each path component. Contention
+and cache-line bouncing of this global lock caused significant
+scalability problems. With the introduction of RCU in Linux kernel,
+this was worked around by making the look-up of path components during
+path walking lock-free.
+
+
+Safe lock-free look-up of dcache hash table
+===========================================
+
+Dcache is a complex data structure with the hash table entries also
+linked together in other lists. In 2.4 kernel, dcache_lock protected
+all the lists. We applied RCU only on hash chain walking. The rest of
+the lists are still protected by dcache_lock. Some of the important
+changes are :
+
+1. The deletion from hash chain is done using hlist_del_rcu() macro
+ which doesn't initialize next pointer of the deleted dentry and
+ this allows us to walk safely lock-free while a deletion is
+ happening.
+
+2. Insertion of a dentry into the hash table is done using
+ hlist_add_head_rcu() which take care of ordering the writes - the
+ writes to the dentry must be visible before the dentry is
+ inserted. This works in conjunction with hlist_for_each_rcu() while
+ walking the hash chain. The only requirement is that all
+ initialization to the dentry must be done before
+ hlist_add_head_rcu() since we don't have dcache_lock protection
+ while traversing the hash chain. This isn't different from the
+ existing code.
+
+3. The dentry looked up without holding dcache_lock by cannot be
+ returned for walking if it is unhashed. It then may have a NULL
+ d_inode or other bogosity since RCU doesn't protect the other
+ fields in the dentry. We therefore use a flag DCACHE_UNHASHED to
+ indicate unhashed dentries and use this in conjunction with a
+ per-dentry lock (d_lock). Once looked up without the dcache_lock,
+ we acquire the per-dentry lock (d_lock) and check if the dentry is
+ unhashed. If so, the look-up is failed. If not, the reference count
+ of the dentry is increased and the dentry is returned.
+
+4. Once a dentry is looked up, it must be ensured during the path walk
+ for that component it doesn't go away. In pre-2.5.10 code, this was
+ done holding a reference to the dentry. dcache_rcu does the same.
+ In some sense, dcache_rcu path walking looks like the pre-2.5.10
+ version.
+
+5. All dentry hash chain updates must take the dcache_lock as well as
+ the per-dentry lock in that order. dput() does this to ensure that
+ a dentry that has just been looked up in another CPU doesn't get
+ deleted before dget() can be done on it.
+
+6. There are several ways to do reference counting of RCU protected
+ objects. One such example is in ipv4 route cache where deferred
+ freeing (using call_rcu()) is done as soon as the reference count
+ goes to zero. This cannot be done in the case of dentries because
+ tearing down of dentries require blocking (dentry_iput()) which
+ isn't supported from RCU callbacks. Instead, tearing down of
+ dentries happen synchronously in dput(), but actual freeing happens
+ later when RCU grace period is over. This allows safe lock-free
+ walking of the hash chains, but a matched dentry may have been
+ partially torn down. The checking of DCACHE_UNHASHED flag with
+ d_lock held detects such dentries and prevents them from being
+ returned from look-up.
+
+
+Maintaining POSIX rename semantics
+==================================
+
+Since look-up of dentries is lock-free, it can race against a
+concurrent rename operation. For example, during rename of file A to
+B, look-up of either A or B must succeed. So, if look-up of B happens
+after A has been removed from the hash chain but not added to the new
+hash chain, it may fail. Also, a comparison while the name is being
+written concurrently by a rename may result in false positive matches
+violating rename semantics. Issues related to race with rename are
+handled as described below :
+
+1. Look-up can be done in two ways - d_lookup() which is safe from
+ simultaneous renames and __d_lookup() which is not. If
+ __d_lookup() fails, it must be followed up by a d_lookup() to
+ correctly determine whether a dentry is in the hash table or
+ not. d_lookup() protects look-ups using a sequence lock
+ (rename_lock).
+
+2. The name associated with a dentry (d_name) may be changed if a
+ rename is allowed to happen simultaneously. To avoid memcmp() in
+ __d_lookup() go out of bounds due to a rename and false positive
+ comparison, the name comparison is done while holding the
+ per-dentry lock. This prevents concurrent renames during this
+ operation.
+
+3. Hash table walking during look-up may move to a different bucket as
+ the current dentry is moved to a different bucket due to rename.
+ But we use hlists in dcache hash table and they are
+ null-terminated. So, even if a dentry moves to a different bucket,
+ hash chain walk will terminate. [with a list_head list, it may not
+ since termination is when the list_head in the original bucket is
+ reached]. Since we redo the d_parent check and compare name while
+ holding d_lock, lock-free look-up will not race against d_move().
+
+4. There can be a theoretical race when a dentry keeps coming back to
+ original bucket due to double moves. Due to this look-up may
+ consider that it has never moved and can end up in a infinite loop.
+ But this is not any worse that theoretical livelocks we already
+ have in the kernel.
+
+
+Important guidelines for filesystem developers related to dcache_rcu
+====================================================================
+
+1. Existing dcache interfaces (pre-2.5.62) exported to filesystem
+ don't change. Only dcache internal implementation changes. However
+ filesystems *must not* delete from the dentry hash chains directly
+ using the list macros like allowed earlier. They must use dcache
+ APIs like d_drop() or __d_drop() depending on the situation.
+
+2. d_flags is now protected by a per-dentry lock (d_lock). All access
+ to d_flags must be protected by it.
+
+3. For a hashed dentry, checking of d_count needs to be protected by
+ d_lock.
+
+
+Papers and other documentation on dcache locking
+================================================
+
+1. Scaling dcache with RCU (http://linuxjournal.com/article.php?sid=7124).
+
+2. http://lse.sourceforge.net/locking/dcache/dcache.html
+
+
+
diff --git a/Documentation/filesystems/devfs/README b/Documentation/filesystems/devfs/README
index 54366ecc241f..aabfba24bc2e 100644
--- a/Documentation/filesystems/devfs/README
+++ b/Documentation/filesystems/devfs/README
@@ -1812,11 +1812,6 @@ it may overflow the messages buffer, but try to get as much of it as
you can
-if you get an Oops, run ksymoops to decode it so that the
-names of the offending functions are provided. A non-decoded Oops is
-pretty useless
-
-
send a copy of your devfsd configuration file(s)
send the bug report to me first.
diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
new file mode 100644
index 000000000000..b3404a032596
--- /dev/null
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
@@ -0,0 +1,195 @@
+ramfs, rootfs and initramfs
+October 17, 2005
+Rob Landley
+=============================
+
+What is ramfs?
+--------------
+
+Ramfs is a very simple filesystem that exports Linux's disk caching
+mechanisms (the page cache and dentry cache) as a dynamically resizable
+ram-based filesystem.
+
+Normally all files are cached in memory by Linux. Pages of data read from
+backing store (usually the block device the filesystem is mounted on) are kept
+around in case it's needed again, but marked as clean (freeable) in case the
+Virtual Memory system needs the memory for something else. Similarly, data
+written to files is marked clean as soon as it has been written to backing
+store, but kept around for caching purposes until the VM reallocates the
+memory. A similar mechanism (the dentry cache) greatly speeds up access to
+directories.
+
+With ramfs, there is no backing store. Files written into ramfs allocate
+dentries and page cache as usual, but there's nowhere to write them to.
+This means the pages are never marked clean, so they can't be freed by the
+VM when it's looking to recycle memory.
+
+The amount of code required to implement ramfs is tiny, because all the
+work is done by the existing Linux caching infrastructure. Basically,
+you're mounting the disk cache as a filesystem. Because of this, ramfs is not
+an optional component removable via menuconfig, since there would be negligible
+space savings.
+
+ramfs and ramdisk:
+------------------
+
+The older "ram disk" mechanism created a synthetic block device out of
+an area of ram and used it as backing store for a filesystem. This block
+device was of fixed size, so the filesystem mounted on it was of fixed
+size. Using a ram disk also required unnecessarily copying memory from the
+fake block device into the page cache (and copying changes back out), as well
+as creating and destroying dentries. Plus it needed a filesystem driver
+(such as ext2) to format and interpret this data.
+
+Compared to ramfs, this wastes memory (and memory bus bandwidth), creates
+unnecessary work for the CPU, and pollutes the CPU caches. (There are tricks
+to avoid this copying by playing with the page tables, but they're unpleasantly
+complicated and turn out to be about as expensive as the copying anyway.)
+More to the point, all the work ramfs is doing has to happen _anyway_,
+since all file access goes through the page and dentry caches. The ram
+disk is simply unnecessary, ramfs is internally much simpler.
+
+Another reason ramdisks are semi-obsolete is that the introduction of
+loopback devices offered a more flexible and convenient way to create
+synthetic block devices, now from files instead of from chunks of memory.
+See losetup (8) for details.
+
+ramfs and tmpfs:
+----------------
+
+One downside of ramfs is you can keep writing data into it until you fill
+up all memory, and the VM can't free it because the VM thinks that files
+should get written to backing store (rather than swap space), but ramfs hasn't
+got any backing store. Because of this, only root (or a trusted user) should
+be allowed write access to a ramfs mount.
+
+A ramfs derivative called tmpfs was created to add size limits, and the ability
+to write the data to swap space. Normal users can be allowed write access to
+tmpfs mounts. See Documentation/filesystems/tmpfs.txt for more information.
+
+What is rootfs?
+---------------
+
+Rootfs is a special instance of ramfs, which is always present in 2.6 systems.
+(It's used internally as the starting and stopping point for searches of the
+kernel's doubly-linked list of mount points.)
+
+Most systems just mount another filesystem over it and ignore it. The
+amount of space an empty instance of ramfs takes up is tiny.
+
+What is initramfs?
+------------------
+
+All 2.6 Linux kernels contain a gzipped "cpio" format archive, which is
+extracted into rootfs when the kernel boots up. After extracting, the kernel
+checks to see if rootfs contains a file "init", and if so it executes it as PID
+1. If found, this init process is responsible for bringing the system the
+rest of the way up, including locating and mounting the real root device (if
+any). If rootfs does not contain an init program after the embedded cpio
+archive is extracted into it, the kernel will fall through to the older code
+to locate and mount a root partition, then exec some variant of /sbin/init
+out of that.
+
+All this differs from the old initrd in several ways:
+
+ - The old initrd was a separate file, while the initramfs archive is linked
+ into the linux kernel image. (The directory linux-*/usr is devoted to
+ generating this archive during the build.)
+
+ - The old initrd file was a gzipped filesystem image (in some file format,
+ such as ext2, that had to be built into the kernel), while the new
+ initramfs archive is a gzipped cpio archive (like tar only simpler,
+ see cpio(1) and Documentation/early-userspace/buffer-format.txt).
+
+ - The program run by the old initrd (which was called /initrd, not /init) did
+ some setup and then returned to the kernel, while the init program from
+ initramfs is not expected to return to the kernel. (If /init needs to hand
+ off control it can overmount / with a new root device and exec another init
+ program. See the switch_root utility, below.)
+
+ - When switching another root device, initrd would pivot_root and then
+ umount the ramdisk. But initramfs is rootfs: you can neither pivot_root
+ rootfs, nor unmount it. Instead delete everything out of rootfs to
+ free up the space (find -xdev / -exec rm '{}' ';'), overmount rootfs
+ with the new root (cd /newmount; mount --move . /; chroot .), attach
+ stdin/stdout/stderr to the new /dev/console, and exec the new init.
+
+ Since this is a remarkably persnickity process (and involves deleting
+ commands before you can run them), the klibc package introduced a helper
+ program (utils/run_init.c) to do all this for you. Most other packages
+ (such as busybox) have named this command "switch_root".
+
+Populating initramfs:
+---------------------
+
+The 2.6 kernel build process always creates a gzipped cpio format initramfs
+archive and links it into the resulting kernel binary. By default, this
+archive is empty (consuming 134 bytes on x86). The config option
+CONFIG_INITRAMFS_SOURCE (for some reason buried under devices->block devices
+in menuconfig, and living in usr/Kconfig) can be used to specify a source for
+the initramfs archive, which will automatically be incorporated into the
+resulting binary. This option can point to an existing gzipped cpio archive, a
+directory containing files to be archived, or a text file specification such
+as the following example:
+
+ dir /dev 755 0 0
+ nod /dev/console 644 0 0 c 5 1
+ nod /dev/loop0 644 0 0 b 7 0
+ dir /bin 755 1000 1000
+ slink /bin/sh busybox 777 0 0
+ file /bin/busybox initramfs/busybox 755 0 0
+ dir /proc 755 0 0
+ dir /sys 755 0 0
+ dir /mnt 755 0 0
+ file /init initramfs/init.sh 755 0 0
+
+One advantage of the text file is that root access is not required to
+set permissions or create device nodes in the new archive. (Note that those
+two example "file" entries expect to find files named "init.sh" and "busybox" in
+a directory called "initramfs", under the linux-2.6.* directory. See
+Documentation/early-userspace/README for more details.)
+
+If you don't already understand what shared libraries, devices, and paths
+you need to get a minimal root filesystem up and running, here are some
+references:
+http://www.tldp.org/HOWTO/Bootdisk-HOWTO/
+http://www.tldp.org/HOWTO/From-PowerUp-To-Bash-Prompt-HOWTO.html
+http://www.linuxfromscratch.org/lfs/view/stable/
+
+The "klibc" package (http://www.kernel.org/pub/linux/libs/klibc) is
+designed to be a tiny C library to statically link early userspace
+code against, along with some related utilities. It is BSD licensed.
+
+I use uClibc (http://www.uclibc.org) and busybox (http://www.busybox.net)
+myself. These are LGPL and GPL, respectively.
+
+In theory you could use glibc, but that's not well suited for small embedded
+uses like this. (A "hello world" program statically linked against glibc is
+over 400k. With uClibc it's 7k. Also note that glibc dlopens libnss to do
+name lookups, even when otherwise statically linked.)
+
+Future directions:
+------------------
+
+Today (2.6.14), initramfs is always compiled in, but not always used. The
+kernel falls back to legacy boot code that is reached only if initramfs does
+not contain an /init program. The fallback is legacy code, there to ensure a
+smooth transition and allowing early boot functionality to gradually move to
+"early userspace" (I.E. initramfs).
+
+The move to early userspace is necessary because finding and mounting the real
+root device is complex. Root partitions can span multiple devices (raid or
+separate journal). They can be out on the network (requiring dhcp, setting a
+specific mac address, logging into a server, etc). They can live on removable
+media, with dynamically allocated major/minor numbers and persistent naming
+issues requiring a full udev implementation to sort out. They can be
+compressed, encrypted, copy-on-write, loopback mounted, strangely partitioned,
+and so on.
+
+This kind of complexity (which inevitably includes policy) is rightly handled
+in userspace. Both klibc and busybox/uClibc are working on simple initramfs
+packages to drop into a kernel build, and when standard solutions are ready
+and widely deployed, the kernel's legacy early boot code will become obsolete
+and a candidate for the feature removal schedule.
+
+But that's a while off yet.
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index f042c12e0ed2..ee4c0a8b8db7 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -3,7 +3,7 @@
Original author: Richard Gooch
- Last updated on August 25, 2005
+ Last updated on October 28, 2005
Copyright (C) 1999 Richard Gooch
Copyright (C) 2005 Pekka Enberg
@@ -11,62 +11,61 @@
This file is released under the GPLv2.
-What is it?
-===========
+Introduction
+============
-The Virtual File System (otherwise known as the Virtual Filesystem
-Switch) is the software layer in the kernel that provides the
-filesystem interface to userspace programs. It also provides an
-abstraction within the kernel which allows different filesystem
-implementations to coexist.
+The Virtual File System (also known as the Virtual Filesystem Switch)
+is the software layer in the kernel that provides the filesystem
+interface to userspace programs. It also provides an abstraction
+within the kernel which allows different filesystem implementations to
+coexist.
+
+VFS system calls open(2), stat(2), read(2), write(2), chmod(2) and so
+on are called from a process context. Filesystem locking is described
+in the document Documentation/filesystems/Locking.
-A Quick Look At How It Works
-============================
+Directory Entry Cache (dcache)
+------------------------------
-In this section I'll briefly describe how things work, before
-launching into the details. I'll start with describing what happens
-when user programs open and manipulate files, and then look from the
-other view which is how a filesystem is supported and subsequently
-mounted.
+The VFS implements the open(2), stat(2), chmod(2), and similar system
+calls. The pathname argument that is passed to them is used by the VFS
+to search through the directory entry cache (also known as the dentry
+cache or dcache). This provides a very fast look-up mechanism to
+translate a pathname (filename) into a specific dentry. Dentries live
+in RAM and are never saved to disc: they exist only for performance.
+
+The dentry cache is meant to be a view into your entire filespace. As
+most computers cannot fit all dentries in the RAM at the same time,
+some bits of the cache are missing. In order to resolve your pathname
+into a dentry, the VFS may have to resort to creating dentries along
+the way, and then loading the inode. This is done by looking up the
+inode.
-Opening a File
---------------
+The Inode Object
+----------------
-The VFS implements the open(2), stat(2), chmod(2) and similar system
-calls. The pathname argument is used by the VFS to search through the
-directory entry cache (dentry cache or "dcache"). This provides a very
-fast look-up mechanism to translate a pathname (filename) into a
-specific dentry.
+An individual dentry usually has a pointer to an inode. Inodes are
+filesystem objects such as regular files, directories, FIFOs and other
+beasts. They live either on the disc (for block device filesystems)
+or in the memory (for pseudo filesystems). Inodes that live on the
+disc are copied into the memory when required and changes to the inode
+are written back to disc. A single inode can be pointed to by multiple
+dentries (hard links, for example, do this).
-An individual dentry usually has a pointer to an inode. Inodes are the
-things that live on disc drives, and can be regular files (you know:
-those things that you write data into), directories, FIFOs and other
-beasts. Dentries live in RAM and are never saved to disc: they exist
-only for performance. Inodes live on disc and are copied into memory
-when required. Later any changes are written back to disc. The inode
-that lives in RAM is a VFS inode, and it is this which the dentry
-points to. A single inode can be pointed to by multiple dentries
-(think about hardlinks).
+To look up an inode requires that the VFS calls the lookup() method of
+the parent directory inode. This method is installed by the specific
+filesystem implementation that the inode lives in. Once the VFS has
+the required dentry (and hence the inode), we can do all those boring
+things like open(2) the file, or stat(2) it to peek at the inode
+data. The stat(2) operation is fairly simple: once the VFS has the
+dentry, it peeks at the inode data and passes some of it back to
+userspace.
-The dcache is meant to be a view into your entire filespace. Unlike
-Linus, most of us losers can't fit enough dentries into RAM to cover
-all of our filespace, so the dcache has bits missing. In order to
-resolve your pathname into a dentry, the VFS may have to resort to
-creating dentries along the way, and then loading the inode. This is
-done by looking up the inode.
-To look up an inode (usually read from disc) requires that the VFS
-calls the lookup() method of the parent directory inode. This method
-is installed by the specific filesystem implementation that the inode
-lives in. There will be more on this later.
-
-Once the VFS has the required dentry (and hence the inode), we can do
-all those boring things like open(2) the file, or stat(2) it to peek
-at the inode data. The stat(2) operation is fairly simple: once the
-VFS has the dentry, it peeks at the inode data and passes some of it
-back to userspace.
+The File Object
+---------------
Opening a file requires another operation: allocation of a file
structure (this is the kernel-side implementation of file
@@ -74,51 +73,39 @@ descriptors). The freshly allocated file structure is initialized with
a pointer to the dentry and a set of file operation member functions.
These are taken from the inode data. The open() file method is then
called so the specific filesystem implementation can do it's work. You
-can see that this is another switch performed by the VFS.
-
-The file structure is placed into the file descriptor table for the
-process.
+can see that this is another switch performed by the VFS. The file
+structure is placed into the file descriptor table for the process.
Reading, writing and closing files (and other assorted VFS operations)
is done by using the userspace file descriptor to grab the appropriate
-file structure, and then calling the required file structure method
-function to do whatever is required.
-
-For as long as the file is open, it keeps the dentry "open" (in use),
-which in turn means that the VFS inode is still in use.
-
-All VFS system calls (i.e. open(2), stat(2), read(2), write(2),
-chmod(2) and so on) are called from a process context. You should
-assume that these calls are made without any kernel locks being
-held. This means that the processes may be executing the same piece of
-filesystem or driver code at the same time, on different
-processors. You should ensure that access to shared resources is
-protected by appropriate locks.
+file structure, and then calling the required file structure method to
+do whatever is required. For as long as the file is open, it keeps the
+dentry in use, which in turn means that the VFS inode is still in use.
Registering and Mounting a Filesystem
--------------------------------------
+=====================================
-If you want to support a new kind of filesystem in the kernel, all you
-need to do is call register_filesystem(). You pass a structure
-describing the filesystem implementation (struct file_system_type)
-which is then added to an internal table of supported filesystems. You
-can do:
+To register and unregister a filesystem, use the following API
+functions:
-% cat /proc/filesystems
+ #include
-to see what filesystems are currently available on your system.
+ extern int register_filesystem(struct file_system_type *);
+ extern int unregister_filesystem(struct file_system_type *);
-When a request is made to mount a block device onto a directory in
-your filespace the VFS will call the appropriate method for the
-specific filesystem. The dentry for the mount point will then be
-updated to point to the root inode for the new filesystem.
+The passed struct file_system_type describes your filesystem. When a
+request is made to mount a device onto a directory in your filespace,
+the VFS will call the appropriate get_sb() method for the specific
+filesystem. The dentry for the mount point will then be updated to
+point to the root inode for the new filesystem.
-It's now time to look at things in more detail.
+You can see all filesystems that are registered to the kernel in the
+file /proc/filesystems.
struct file_system_type
-=======================
+-----------------------
This describes the filesystem. As of kernel 2.6.13, the following
members are defined:
@@ -197,8 +184,14 @@ A fill_super() method implementation has the following arguments:
int silent: whether or not to be silent on error
+The Superblock Object
+=====================
+
+A superblock object represents a mounted filesystem.
+
+
struct super_operations
-=======================
+-----------------------
This describes how the VFS can manipulate the superblock of your
filesystem. As of kernel 2.6.13, the following members are defined:
@@ -286,9 +279,9 @@ or bottom half).
a superblock. The second parameter indicates whether the method
should wait until the write out has been completed. Optional.
- write_super_lockfs: called when VFS is locking a filesystem and forcing
- it into a consistent state. This function is currently used by the
- Logical Volume Manager (LVM).
+ write_super_lockfs: called when VFS is locking a filesystem and
+ forcing it into a consistent state. This method is currently
+ used by the Logical Volume Manager (LVM).
unlockfs: called when VFS is unlocking a filesystem and making it writable
again.
@@ -317,8 +310,14 @@ field. This is a pointer to a "struct inode_operations" which
describes the methods that can be performed on individual inodes.
+The Inode Object
+================
+
+An inode object represents an object within the filesystem.
+
+
struct inode_operations
-=======================
+-----------------------
This describes how the VFS can manipulate an inode in your
filesystem. As of kernel 2.6.13, the following members are defined:
@@ -394,51 +393,62 @@ otherwise noted.
will probably need to call d_instantiate() just as you would
in the create() method
+ rename: called by the rename(2) system call to rename the object to
+ have the parent and name given by the second inode and dentry.
+
readlink: called by the readlink(2) system call. Only required if
you want to support reading symbolic links
follow_link: called by the VFS to follow a symbolic link to the
inode it points to. Only required if you want to support
- symbolic links. This function returns a void pointer cookie
+ symbolic links. This method returns a void pointer cookie
that is passed to put_link().
put_link: called by the VFS to release resources allocated by
- follow_link(). The cookie returned by follow_link() is passed to
- to this function as the last parameter. It is used by filesystems
- such as NFS where page cache is not stable (i.e. page that was
- installed when the symbolic link walk started might not be in the
- page cache at the end of the walk).
+ follow_link(). The cookie returned by follow_link() is passed
+ to to this method as the last parameter. It is used by
+ filesystems such as NFS where page cache is not stable
+ (i.e. page that was installed when the symbolic link walk
+ started might not be in the page cache at the end of the
+ walk).
- truncate: called by the VFS to change the size of a file. The i_size
- field of the inode is set to the desired size by the VFS before
- this function is called. This function is called by the truncate(2)
- system call and related functionality.
+ truncate: called by the VFS to change the size of a file. The
+ i_size field of the inode is set to the desired size by the
+ VFS before this method is called. This method is called by
+ the truncate(2) system call and related functionality.
permission: called by the VFS to check for access rights on a POSIX-like
filesystem.
- setattr: called by the VFS to set attributes for a file. This function is
- called by chmod(2) and related system calls.
+ setattr: called by the VFS to set attributes for a file. This method
+ is called by chmod(2) and related system calls.
- getattr: called by the VFS to get attributes of a file. This function is
- called by stat(2) and related system calls.
+ getattr: called by the VFS to get attributes of a file. This method
+ is called by stat(2) and related system calls.
setxattr: called by the VFS to set an extended attribute for a file.
- Extended attribute is a name:value pair associated with an inode. This
- function is called by setxattr(2) system call.
+ Extended attribute is a name:value pair associated with an
+ inode. This method is called by setxattr(2) system call.
- getxattr: called by the VFS to retrieve the value of an extended attribute
- name. This function is called by getxattr(2) function call.
+ getxattr: called by the VFS to retrieve the value of an extended
+ attribute name. This method is called by getxattr(2) function
+ call.
- listxattr: called by the VFS to list all extended attributes for a given
- file. This function is called by listxattr(2) system call.
+ listxattr: called by the VFS to list all extended attributes for a
+ given file. This method is called by listxattr(2) system call.
- removexattr: called by the VFS to remove an extended attribute from a file.
- This function is called by removexattr(2) system call.
+ removexattr: called by the VFS to remove an extended attribute from
+ a file. This method is called by removexattr(2) system call.
+
+
+The Address Space Object
+========================
+
+The address space object is used to identify pages in the page cache.
struct address_space_operations
-===============================
+-------------------------------
This describes how the VFS can manipulate mapping of a file to page cache in
your filesystem. As of kernel 2.6.13, the following members are defined:
@@ -502,8 +512,14 @@ struct address_space_operations {
it. An example implementation can be found in fs/ext2/xip.c.
+The File Object
+===============
+
+A file object represents a file opened by a process.
+
+
struct file_operations
-======================
+----------------------
This describes how the VFS can manipulate an open file. As of kernel
2.6.13, the following members are defined:
@@ -661,7 +677,7 @@ of child dentries. Child dentries are basically like files in a
directory.
-Directory Entry Cache APIs
+Directory Entry Cache API
--------------------------
There are a number of functions defined which permit a filesystem to
@@ -705,178 +721,24 @@ manipulate dentries:
and the dentry is returned. The caller must use d_put()
to free the dentry when it finishes using it.
-
-RCU-based dcache locking model
-------------------------------
-
-On many workloads, the most common operation on dcache is
-to look up a dentry, given a parent dentry and the name
-of the child. Typically, for every open(), stat() etc.,
-the dentry corresponding to the pathname will be looked
-up by walking the tree starting with the first component
-of the pathname and using that dentry along with the next
-component to look up the next level and so on. Since it
-is a frequent operation for workloads like multiuser
-environments and web servers, it is important to optimize
-this path.
-
-Prior to 2.5.10, dcache_lock was acquired in d_lookup and thus
-in every component during path look-up. Since 2.5.10 onwards,
-fast-walk algorithm changed this by holding the dcache_lock
-at the beginning and walking as many cached path component
-dentries as possible. This significantly decreases the number
-of acquisition of dcache_lock. However it also increases the
-lock hold time significantly and affects performance in large
-SMP machines. Since 2.5.62 kernel, dcache has been using
-a new locking model that uses RCU to make dcache look-up
-lock-free.
-
-The current dcache locking model is not very different from the existing
-dcache locking model. Prior to 2.5.62 kernel, dcache_lock
-protected the hash chain, d_child, d_alias, d_lru lists as well
-as d_inode and several other things like mount look-up. RCU-based
-changes affect only the way the hash chain is protected. For everything
-else the dcache_lock must be taken for both traversing as well as
-updating. The hash chain updates too take the dcache_lock.
-The significant change is the way d_lookup traverses the hash chain,
-it doesn't acquire the dcache_lock for this and rely on RCU to
-ensure that the dentry has not been *freed*.
+For further information on dentry locking, please refer to the document
+Documentation/filesystems/dentry-locking.txt.
-Dcache locking details
-----------------------
+Resources
+=========
-For many multi-user workloads, open() and stat() on files are
-very frequently occurring operations. Both involve walking
-of path names to find the dentry corresponding to the
-concerned file. In 2.4 kernel, dcache_lock was held
-during look-up of each path component. Contention and
-cache-line bouncing of this global lock caused significant
-scalability problems. With the introduction of RCU
-in Linux kernel, this was worked around by making
-the look-up of path components during path walking lock-free.
+(Note some of these resources are not up-to-date with the latest kernel
+ version.)
+Creating Linux virtual filesystems. 2002
+
-Safe lock-free look-up of dcache hash table
-===========================================
+The Linux Virtual File-system Layer by Neil Brown. 1999
+
-Dcache is a complex data structure with the hash table entries
-also linked together in other lists. In 2.4 kernel, dcache_lock
-protected all the lists. We applied RCU only on hash chain
-walking. The rest of the lists are still protected by dcache_lock.
-Some of the important changes are :
+A tour of the Linux VFS by Michael K. Johnson. 1996
+
-1. The deletion from hash chain is done using hlist_del_rcu() macro which
- doesn't initialize next pointer of the deleted dentry and this
- allows us to walk safely lock-free while a deletion is happening.
-
-2. Insertion of a dentry into the hash table is done using
- hlist_add_head_rcu() which take care of ordering the writes -
- the writes to the dentry must be visible before the dentry
- is inserted. This works in conjunction with hlist_for_each_rcu()
- while walking the hash chain. The only requirement is that
- all initialization to the dentry must be done before hlist_add_head_rcu()
- since we don't have dcache_lock protection while traversing
- the hash chain. This isn't different from the existing code.
-
-3. The dentry looked up without holding dcache_lock by cannot be
- returned for walking if it is unhashed. It then may have a NULL
- d_inode or other bogosity since RCU doesn't protect the other
- fields in the dentry. We therefore use a flag DCACHE_UNHASHED to
- indicate unhashed dentries and use this in conjunction with a
- per-dentry lock (d_lock). Once looked up without the dcache_lock,
- we acquire the per-dentry lock (d_lock) and check if the
- dentry is unhashed. If so, the look-up is failed. If not, the
- reference count of the dentry is increased and the dentry is returned.
-
-4. Once a dentry is looked up, it must be ensured during the path
- walk for that component it doesn't go away. In pre-2.5.10 code,
- this was done holding a reference to the dentry. dcache_rcu does
- the same. In some sense, dcache_rcu path walking looks like
- the pre-2.5.10 version.
-
-5. All dentry hash chain updates must take the dcache_lock as well as
- the per-dentry lock in that order. dput() does this to ensure
- that a dentry that has just been looked up in another CPU
- doesn't get deleted before dget() can be done on it.
-
-6. There are several ways to do reference counting of RCU protected
- objects. One such example is in ipv4 route cache where
- deferred freeing (using call_rcu()) is done as soon as
- the reference count goes to zero. This cannot be done in
- the case of dentries because tearing down of dentries
- require blocking (dentry_iput()) which isn't supported from
- RCU callbacks. Instead, tearing down of dentries happen
- synchronously in dput(), but actual freeing happens later
- when RCU grace period is over. This allows safe lock-free
- walking of the hash chains, but a matched dentry may have
- been partially torn down. The checking of DCACHE_UNHASHED
- flag with d_lock held detects such dentries and prevents
- them from being returned from look-up.
-
-
-Maintaining POSIX rename semantics
-==================================
-
-Since look-up of dentries is lock-free, it can race against
-a concurrent rename operation. For example, during rename
-of file A to B, look-up of either A or B must succeed.
-So, if look-up of B happens after A has been removed from the
-hash chain but not added to the new hash chain, it may fail.
-Also, a comparison while the name is being written concurrently
-by a rename may result in false positive matches violating
-rename semantics. Issues related to race with rename are
-handled as described below :
-
-1. Look-up can be done in two ways - d_lookup() which is safe
- from simultaneous renames and __d_lookup() which is not.
- If __d_lookup() fails, it must be followed up by a d_lookup()
- to correctly determine whether a dentry is in the hash table
- or not. d_lookup() protects look-ups using a sequence
- lock (rename_lock).
-
-2. The name associated with a dentry (d_name) may be changed if
- a rename is allowed to happen simultaneously. To avoid memcmp()
- in __d_lookup() go out of bounds due to a rename and false
- positive comparison, the name comparison is done while holding the
- per-dentry lock. This prevents concurrent renames during this
- operation.
-
-3. Hash table walking during look-up may move to a different bucket as
- the current dentry is moved to a different bucket due to rename.
- But we use hlists in dcache hash table and they are null-terminated.
- So, even if a dentry moves to a different bucket, hash chain
- walk will terminate. [with a list_head list, it may not since
- termination is when the list_head in the original bucket is reached].
- Since we redo the d_parent check and compare name while holding
- d_lock, lock-free look-up will not race against d_move().
-
-4. There can be a theoretical race when a dentry keeps coming back
- to original bucket due to double moves. Due to this look-up may
- consider that it has never moved and can end up in a infinite loop.
- But this is not any worse that theoretical livelocks we already
- have in the kernel.
-
-
-Important guidelines for filesystem developers related to dcache_rcu
-====================================================================
-
-1. Existing dcache interfaces (pre-2.5.62) exported to filesystem
- don't change. Only dcache internal implementation changes. However
- filesystems *must not* delete from the dentry hash chains directly
- using the list macros like allowed earlier. They must use dcache
- APIs like d_drop() or __d_drop() depending on the situation.
-
-2. d_flags is now protected by a per-dentry lock (d_lock). All
- access to d_flags must be protected by it.
-
-3. For a hashed dentry, checking of d_count needs to be protected
- by d_lock.
-
-
-Papers and other documentation on dcache locking
-================================================
-
-1. Scaling dcache with RCU (http://linuxjournal.com/article.php?sid=7124).
-
-2. http://lse.sourceforge.net/locking/dcache/dcache.html
+A small trail through the Linux kernel by Andries Brouwer. 2001
+
diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt
index c7d5d0c7067d..74aeb142ae5f 100644
--- a/Documentation/filesystems/xfs.txt
+++ b/Documentation/filesystems/xfs.txt
@@ -19,15 +19,43 @@ Mount Options
When mounting an XFS filesystem, the following options are accepted.
- biosize=size
- Sets the preferred buffered I/O size (default size is 64K).
- "size" must be expressed as the logarithm (base2) of the
- desired I/O size.
- Valid values for this option are 14 through 16, inclusive
- (i.e. 16K, 32K, and 64K bytes). On machines with a 4K
- pagesize, 13 (8K bytes) is also a valid size.
- The preferred buffered I/O size can also be altered on an
- individual file basis using the ioctl(2) system call.
+ allocsize=size
+ Sets the buffered I/O end-of-file preallocation size when
+ doing delayed allocation writeout (default size is 64KiB).
+ Valid values for this option are page size (typically 4KiB)
+ through to 1GiB, inclusive, in power-of-2 increments.
+
+ attr2/noattr2
+ The options enable/disable (default is disabled for backward
+ compatibility on-disk) an "opportunistic" improvement to be
+ made in the way inline extended attributes are stored on-disk.
+ When the new form is used for the first time (by setting or
+ removing extended attributes) the on-disk superblock feature
+ bit field will be updated to reflect this format being in use.
+
+ barrier
+ Enables the use of block layer write barriers for writes into
+ the journal and unwritten extent conversion. This allows for
+ drive level write caching to be enabled, for devices that
+ support write barriers.
+
+ dmapi
+ Enable the DMAPI (Data Management API) event callouts.
+ Use with the "mtpt" option.
+
+ grpid/bsdgroups and nogrpid/sysvgroups
+ These options define what group ID a newly created file gets.
+ When grpid is set, it takes the group ID of the directory in
+ which it is created; otherwise (the default) it takes the fsgid
+ of the current process, unless the directory has the setgid bit
+ set, in which case it takes the gid from the parent directory,
+ and also gets the setgid bit set if it is a directory itself.
+
+ ihashsize=value
+ Sets the number of hash buckets available for hashing the
+ in-memory inodes of the specified mount point. If a value
+ of zero is used, the value selected by the default algorithm
+ will be displayed in /proc/mounts.
ikeep/noikeep
When inode clusters are emptied of inodes, keep them around
@@ -35,12 +63,31 @@ When mounting an XFS filesystem, the following options are accepted.
and is still the default for now. Using the noikeep option,
inode clusters are returned to the free space pool.
+ inode64
+ Indicates that XFS is allowed to create inodes at any location
+ in the filesystem, including those which will result in inode
+ numbers occupying more than 32 bits of significance. This is
+ provided for backwards compatibility, but causes problems for
+ backup applications that cannot handle large inode numbers.
+
+ largeio/nolargeio
+ If "nolargeio" is specified, the optimal I/O reported in
+ st_blksize by stat(2) will be as small as possible to allow user
+ applications to avoid inefficient read/modify/write I/O.
+ If "largeio" specified, a filesystem that has a "swidth" specified
+ will return the "swidth" value (in bytes) in st_blksize. If the
+ filesystem does not have a "swidth" specified but does specify
+ an "allocsize" then "allocsize" (in bytes) will be returned
+ instead.
+ If neither of these two options are specified, then filesystem
+ will behave as if "nolargeio" was specified.
+
logbufs=value
Set the number of in-memory log buffers. Valid numbers range
from 2-8 inclusive.
The default value is 8 buffers for filesystems with a
- blocksize of 64K, 4 buffers for filesystems with a blocksize
- of 32K, 3 buffers for filesystems with a blocksize of 16K
+ blocksize of 64KiB, 4 buffers for filesystems with a blocksize
+ of 32KiB, 3 buffers for filesystems with a blocksize of 16KiB
and 2 buffers for all other configurations. Increasing the
number of buffers may increase performance on some workloads
at the cost of the memory used for the additional log buffers
@@ -49,10 +96,10 @@ When mounting an XFS filesystem, the following options are accepted.
logbsize=value
Set the size of each in-memory log buffer.
Size may be specified in bytes, or in kilobytes with a "k" suffix.
- Valid sizes for version 1 and version 2 logs are 16384 (16k) and
- 32768 (32k). Valid sizes for version 2 logs also include
+ Valid sizes for version 1 and version 2 logs are 16384 (16k) and
+ 32768 (32k). Valid sizes for version 2 logs also include
65536 (64k), 131072 (128k) and 262144 (256k).
- The default value for machines with more than 32MB of memory
+ The default value for machines with more than 32MiB of memory
is 32768, machines with less memory use 16384 by default.
logdev=device and rtdev=device
@@ -62,6 +109,11 @@ When mounting an XFS filesystem, the following options are accepted.
optional, and the log section can be separate from the data
section or contained within it.
+ mtpt=mountpoint
+ Use with the "dmapi" option. The value specified here will be
+ included in the DMAPI mount event, and should be the path of
+ the actual mountpoint that is used.
+
noalign
Data allocations will not be aligned at stripe unit boundaries.
@@ -91,13 +143,17 @@ When mounting an XFS filesystem, the following options are accepted.
O_SYNC writes can be lost if the system crashes.
If timestamp updates are critical, use the osyncisosync option.
- quota/usrquota/uqnoenforce
+ uquota/usrquota/uqnoenforce/quota
User disk quota accounting enabled, and limits (optionally)
- enforced.
+ enforced. Refer to xfs_quota(8) for further details.
- grpquota/gqnoenforce
+ gquota/grpquota/gqnoenforce
Group disk quota accounting enabled and limits (optionally)
- enforced.
+ enforced. Refer to xfs_quota(8) for further details.
+
+ pquota/prjquota/pqnoenforce
+ Project disk quota accounting enabled and limits (optionally)
+ enforced. Refer to xfs_quota(8) for further details.
sunit=value and swidth=value
Used to specify the stripe unit and width for a RAID device or
@@ -113,15 +169,21 @@ When mounting an XFS filesystem, the following options are accepted.
The "swidth" option is required if the "sunit" option has been
specified, and must be a multiple of the "sunit" value.
+ swalloc
+ Data allocations will be rounded up to stripe width boundaries
+ when the current end of file is being extended and the file
+ size is larger than the stripe width size.
+
+
sysctls
=======
The following sysctls are available for the XFS filesystem:
fs.xfs.stats_clear (Min: 0 Default: 0 Max: 1)
- Setting this to "1" clears accumulated XFS statistics
+ Setting this to "1" clears accumulated XFS statistics
in /proc/fs/xfs/stat. It then immediately resets to "0".
-
+
fs.xfs.xfssyncd_centisecs (Min: 100 Default: 3000 Max: 720000)
The interval at which the xfssyncd thread flushes metadata
out to disk. This thread will flush log activity out, and
@@ -143,9 +205,9 @@ The following sysctls are available for the XFS filesystem:
XFS_ERRLEVEL_HIGH: 5
fs.xfs.panic_mask (Min: 0 Default: 0 Max: 127)
- Causes certain error conditions to call BUG(). Value is a bitmask;
+ Causes certain error conditions to call BUG(). Value is a bitmask;
AND together the tags which represent errors which should cause panics:
-
+
XFS_NO_PTAG 0
XFS_PTAG_IFLUSH 0x00000001
XFS_PTAG_LOGRES 0x00000002
@@ -155,7 +217,7 @@ The following sysctls are available for the XFS filesystem:
XFS_PTAG_SHUTDOWN_IOERROR 0x00000020
XFS_PTAG_SHUTDOWN_LOGERROR 0x00000040
- This option is intended for debugging only.
+ This option is intended for debugging only.
fs.xfs.irix_symlink_mode (Min: 0 Default: 0 Max: 1)
Controls whether symlinks are created with mode 0777 (default)
@@ -164,25 +226,37 @@ The following sysctls are available for the XFS filesystem:
fs.xfs.irix_sgid_inherit (Min: 0 Default: 0 Max: 1)
Controls files created in SGID directories.
If the group ID of the new file does not match the effective group
- ID or one of the supplementary group IDs of the parent dir, the
- ISGID bit is cleared if the irix_sgid_inherit compatibility sysctl
+ ID or one of the supplementary group IDs of the parent dir, the
+ ISGID bit is cleared if the irix_sgid_inherit compatibility sysctl
is set.
fs.xfs.restrict_chown (Min: 0 Default: 1 Max: 1)
Controls whether unprivileged users can use chown to "give away"
a file to another user.
- fs.xfs.inherit_sync (Min: 0 Default: 1 Max 1)
- Setting this to "1" will cause the "sync" flag set
- by the chattr(1) command on a directory to be
+ fs.xfs.inherit_sync (Min: 0 Default: 1 Max: 1)
+ Setting this to "1" will cause the "sync" flag set
+ by the xfs_io(8) chattr command on a directory to be
inherited by files in that directory.
- fs.xfs.inherit_nodump (Min: 0 Default: 1 Max 1)
- Setting this to "1" will cause the "nodump" flag set
- by the chattr(1) command on a directory to be
+ fs.xfs.inherit_nodump (Min: 0 Default: 1 Max: 1)
+ Setting this to "1" will cause the "nodump" flag set
+ by the xfs_io(8) chattr command on a directory to be
inherited by files in that directory.
- fs.xfs.inherit_noatime (Min: 0 Default: 1 Max 1)
- Setting this to "1" will cause the "noatime" flag set
- by the chattr(1) command on a directory to be
+ fs.xfs.inherit_noatime (Min: 0 Default: 1 Max: 1)
+ Setting this to "1" will cause the "noatime" flag set
+ by the xfs_io(8) chattr command on a directory to be
inherited by files in that directory.
+
+ fs.xfs.inherit_nosymlinks (Min: 0 Default: 1 Max: 1)
+ Setting this to "1" will cause the "nosymlinks" flag set
+ by the xfs_io(8) chattr command on a directory to be
+ inherited by files in that directory.
+
+ fs.xfs.rotorstep (Min: 1 Default: 1 Max: 256)
+ In "inode32" allocation mode, this option determines how many
+ files the allocator attempts to allocate in the same allocation
+ group before moving to the next allocation group. The intent
+ is to control the rate at which the allocator moves between
+ allocation groups when allocating extents for new files.
diff --git a/Documentation/hpet.txt b/Documentation/hpet.txt
index 4e7cc8d3359b..e52457581f47 100644
--- a/Documentation/hpet.txt
+++ b/Documentation/hpet.txt
@@ -1,18 +1,21 @@
High Precision Event Timer Driver for Linux
-The High Precision Event Timer (HPET) hardware is the future replacement for the 8254 and Real
-Time Clock (RTC) periodic timer functionality. Each HPET can have up two 32 timers. It is possible
-to configure the first two timers as legacy replacements for 8254 and RTC periodic. A specification
-done by INTEL and Microsoft can be found at http://www.intel.com/labs/platcomp/hpet/hpetspec.htm.
+The High Precision Event Timer (HPET) hardware is the future replacement
+for the 8254 and Real Time Clock (RTC) periodic timer functionality.
+Each HPET can have up two 32 timers. It is possible to configure the
+first two timers as legacy replacements for 8254 and RTC periodic timers.
+A specification done by Intel and Microsoft can be found at
+.
-The driver supports detection of HPET driver allocation and initialization of the HPET before the
-driver module_init routine is called. This enables platform code which uses timer 0 or 1 as the
-main timer to intercept HPET initialization. An example of this initialization can be found in
+The driver supports detection of HPET driver allocation and initialization
+of the HPET before the driver module_init routine is called. This enables
+platform code which uses timer 0 or 1 as the main timer to intercept HPET
+initialization. An example of this initialization can be found in
arch/i386/kernel/time_hpet.c.
-The driver provides two APIs which are very similar to the API found in the rtc.c driver.
-There is a user space API and a kernel space API. An example user space program is provided
-below.
+The driver provides two APIs which are very similar to the API found in
+the rtc.c driver. There is a user space API and a kernel space API.
+An example user space program is provided below.
#include
#include
@@ -290,9 +293,8 @@ The kernel API has three interfaces exported from the driver:
hpet_unregister(struct hpet_task *tp)
hpet_control(struct hpet_task *tp, unsigned int cmd, unsigned long arg)
-The kernel module using this interface fills in the ht_func and ht_data members of the
-hpet_task structure before calling hpet_register. hpet_control simply vectors to the hpet_ioctl
-routine and has the same commands and respective arguments as the user API. hpet_unregister
+The kernel module using this interface fills in the ht_func and ht_data
+members of the hpet_task structure before calling hpet_register.
+hpet_control simply vectors to the hpet_ioctl routine and has the same
+commands and respective arguments as the user API. hpet_unregister
is used to terminate usage of the HPET timer reserved by hpet_register.
-
-
diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt
index bd8eefa17587..af67faccf4de 100644
--- a/Documentation/magic-number.txt
+++ b/Documentation/magic-number.txt
@@ -120,7 +120,7 @@ ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s drivers/isdn/i4l/isdn_net_li
SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg arch/*/amiga/config.c
STLI_BOARDMAGIC 0x4bc6c825 stlibrd include/linux/istallion.h
CS_STATE_MAGIC 0x4c4f4749 cs_state sound/oss/cs46xx.c
-SLAB_C_MAGIC 0x4f17a36d kmem_cache_s mm/slab.c
+SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c
COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c
I810_CARD_MAGIC 0x5072696E i810_card sound/oss/i810_audio.c
TRIDENT_CARD_MAGIC 0x5072696E trident_card sound/oss/trident.c
diff --git a/Documentation/networking/decnet.txt b/Documentation/networking/decnet.txt
index c6bd25f5d61d..e6c39c5831f5 100644
--- a/Documentation/networking/decnet.txt
+++ b/Documentation/networking/decnet.txt
@@ -176,8 +176,6 @@ information (_most_ of which _is_ _essential_) includes:
- Which client caused the problem ?
- How much data was being transferred ?
- Was the network congested ?
- - If there was a kernel panic, please run the output through ksymoops
- before sending it to me, otherwise its _useless_.
- How can the problem be reproduced ?
- Can you use tcpdump to get a trace ? (N.B. Most (all?) versions of
tcpdump don't understand how to dump DECnet properly, so including
diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt
index 6726b524ec45..bd528ffbeb4b 100644
--- a/Documentation/networking/s2io.txt
+++ b/Documentation/networking/s2io.txt
@@ -1,48 +1,153 @@
-S2IO Technologies XFrame 10 Gig adapter.
--------------------------------------------
+Release notes for Neterion's (Formerly S2io) Xframe I/II PCI-X 10GbE driver.
-I. Module loadable parameters.
-When loaded as a module, the driver provides a host of Module loadable
-parameters, so the device can be tuned as per the users needs.
-A list of the Module params is given below.
-(i) ring_num: This can be used to program the number of
- receive rings used in the driver.
-(ii) ring_len: This defines the number of descriptors each ring
- can have. There can be a maximum of 8 rings.
-(iii) frame_len: This is an array of size 8. Using this we can
- set the maximum size of the received frame that can
- be steered into the corrsponding receive ring.
-(iv) fifo_num: This defines the number of Tx FIFOs thats used in
- the driver.
-(v) fifo_len: Each element defines the number of
- Tx descriptors that can be associated with each
- corresponding FIFO. There are a maximum of 8 FIFOs.
-(vi) tx_prio: This is a bool, if module is loaded with a non-zero
- value for tx_prio multi FIFO scheme is activated.
-(vii) rx_prio: This is a bool, if module is loaded with a non-zero
- value for tx_prio multi RING scheme is activated.
-(viii) latency_timer: The value given against this param will be
- loaded into the latency timer register in PCI Config
- space, else the register is left with its reset value.
+Contents
+=======
+- 1. Introduction
+- 2. Identifying the adapter/interface
+- 3. Features supported
+- 4. Command line parameters
+- 5. Performance suggestions
+- 6. Available Downloads
-II. Performance tuning.
- By changing a few sysctl parameters.
- Copy the following lines into a file and run the following command,
- "sysctl -p "
-### IPV4 specific settings
-net.ipv4.tcp_timestamps = 0 # turns TCP timestamp support off, default 1, reduces CPU use
-net.ipv4.tcp_sack = 0 # turn SACK support off, default on
-# on systems with a VERY fast bus -> memory interface this is the big gainer
-net.ipv4.tcp_rmem = 10000000 10000000 10000000 # sets min/default/max TCP read buffer, default 4096 87380 174760
-net.ipv4.tcp_wmem = 10000000 10000000 10000000 # sets min/pressure/max TCP write buffer, default 4096 16384 131072
-net.ipv4.tcp_mem = 10000000 10000000 10000000 # sets min/pressure/max TCP buffer space, default 31744 32256 32768
-
-### CORE settings (mostly for socket and UDP effect)
-net.core.rmem_max = 524287 # maximum receive socket buffer size, default 131071
-net.core.wmem_max = 524287 # maximum send socket buffer size, default 131071
-net.core.rmem_default = 524287 # default receive socket buffer size, default 65535
-net.core.wmem_default = 524287 # default send socket buffer size, default 65535
-net.core.optmem_max = 524287 # maximum amount of option memory buffers, default 10240
-net.core.netdev_max_backlog = 300000 # number of unprocessed input packets before kernel starts dropping them, default 300
----End of performance tuning file---
+
+1. Introduction:
+This Linux driver supports Neterion's Xframe I PCI-X 1.0 and
+Xframe II PCI-X 2.0 adapters. It supports several features
+such as jumbo frames, MSI/MSI-X, checksum offloads, TSO, UFO and so on.
+See below for complete list of features.
+All features are supported for both IPv4 and IPv6.
+
+2. Identifying the adapter/interface:
+a. Insert the adapter(s) in your system.
+b. Build and load driver
+# insmod s2io.ko
+c. View log messages
+# dmesg | tail -40
+You will see messages similar to:
+eth3: Neterion Xframe I 10GbE adapter (rev 3), Version 2.0.9.1, Intr type INTA
+eth4: Neterion Xframe II 10GbE adapter (rev 2), Version 2.0.9.1, Intr type INTA
+eth4: Device is on 64 bit 133MHz PCIX(M1) bus
+
+The above messages identify the adapter type(Xframe I/II), adapter revision,
+driver version, interface name(eth3, eth4), Interrupt type(INTA, MSI, MSI-X).
+In case of Xframe II, the PCI/PCI-X bus width and frequency are displayed
+as well.
+
+To associate an interface with a physical adapter use "ethtool -p ".
+The corresponding adapter's LED will blink multiple times.
+
+3. Features supported:
+a. Jumbo frames. Xframe I/II supports MTU upto 9600 bytes,
+modifiable using ifconfig command.
+
+b. Offloads. Supports checksum offload(TCP/UDP/IP) on transmit
+and receive, TSO.
+
+c. Multi-buffer receive mode. Scattering of packet across multiple
+buffers. Currently driver supports 2-buffer mode which yields
+significant performance improvement on certain platforms(SGI Altix,
+IBM xSeries).
+
+d. MSI/MSI-X. Can be enabled on platforms which support this feature
+(IA64, Xeon) resulting in noticeable performance improvement(upto 7%
+on certain platforms).
+
+e. NAPI. Compile-time option(CONFIG_S2IO_NAPI) for better Rx interrupt
+moderation.
+
+f. Statistics. Comprehensive MAC-level and software statistics displayed
+using "ethtool -S" option.
+
+g. Multi-FIFO/Ring. Supports up to 8 transmit queues and receive rings,
+with multiple steering options.
+
+4. Command line parameters
+a. tx_fifo_num
+Number of transmit queues
+Valid range: 1-8
+Default: 1
+
+b. rx_ring_num
+Number of receive rings
+Valid range: 1-8
+Default: 1
+
+c. tx_fifo_len
+Size of each transmit queue
+Valid range: Total length of all queues should not exceed 8192
+Default: 4096
+
+d. rx_ring_sz
+Size of each receive ring(in 4K blocks)
+Valid range: Limited by memory on system
+Default: 30
+
+e. intr_type
+Specifies interrupt type. Possible values 1(INTA), 2(MSI), 3(MSI-X)
+Valid range: 1-3
+Default: 1
+
+5. Performance suggestions
+General:
+a. Set MTU to maximum(9000 for switch setup, 9600 in back-to-back configuration)
+b. Set TCP windows size to optimal value.
+For instance, for MTU=1500 a value of 210K has been observed to result in
+good performance.
+# sysctl -w net.ipv4.tcp_rmem="210000 210000 210000"
+# sysctl -w net.ipv4.tcp_wmem="210000 210000 210000"
+For MTU=9000, TCP window size of 10 MB is recommended.
+# sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000"
+# sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000"
+
+Transmit performance:
+a. By default, the driver respects BIOS settings for PCI bus parameters.
+However, you may want to experiment with PCI bus parameters
+max-split-transactions(MOST) and MMRBC (use setpci command).
+A MOST value of 2 has been found optimal for Opterons and 3 for Itanium.
+It could be different for your hardware.
+Set MMRBC to 4K**.
+
+For example you can set
+For opteron
+#setpci -d 17d5:* 62=1d
+For Itanium
+#setpci -d 17d5:* 62=3d
+
+For detailed description of the PCI registers, please see Xframe User Guide.
+
+b. Ensure Transmit Checksum offload is enabled. Use ethtool to set/verify this
+parameter.
+c. Turn on TSO(using "ethtool -K")
+# ethtool -K tso on
+
+Receive performance:
+a. By default, the driver respects BIOS settings for PCI bus parameters.
+However, you may want to set PCI latency timer to 248.
+#setpci -d 17d5:* LATENCY_TIMER=f8
+For detailed description of the PCI registers, please see Xframe User Guide.
+b. Use 2-buffer mode. This results in large performance boost on
+on certain platforms(eg. SGI Altix, IBM xSeries).
+c. Ensure Receive Checksum offload is enabled. Use "ethtool -K ethX" command to
+set/verify this option.
+d. Enable NAPI feature(in kernel configuration Device Drivers ---> Network
+device support ---> Ethernet (10000 Mbit) ---> S2IO 10Gbe Xframe NIC) to
+bring down CPU utilization.
+
+** For AMD opteron platforms with 8131 chipset, MMRBC=1 and MOST=1 are
+recommended as safe parameters.
+For more information, please review the AMD8131 errata at
+http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26310.pdf
+
+6. Available Downloads
+Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up
+to date, also the latest "s2io" code (including support for 2.4 kernels) is
+available via "Support" link on the Neterion site: http://www.neterion.com.
+
+For Xframe User Guide (Programming manual), visit ftp site ns1.s2io.com,
+user: linuxdocs password: HALdocs
+
+7. Support
+For further support please contact either your 10GbE Xframe NIC vendor (IBM,
+HP, SGI etc.) or click on the "Support" link on the Neterion site:
+http://www.neterion.com.
diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt
index 66eaaab7773d..c563842ed805 100644
--- a/Documentation/oops-tracing.txt
+++ b/Documentation/oops-tracing.txt
@@ -1,6 +1,6 @@
NOTE: ksymoops is useless on 2.6. Please use the Oops in its original format
(from dmesg, etc). Ignore any references in this or other docs to "decoding
-the Oops" or "running it through ksymoops". If you post an Oops fron 2.6 that
+the Oops" or "running it through ksymoops". If you post an Oops from 2.6 that
has been run through ksymoops, people will just tell you to repost it.
Quick Summary
diff --git a/Documentation/power/video.txt b/Documentation/power/video.txt
index 526d6dd267ea..912bed87c758 100644
--- a/Documentation/power/video.txt
+++ b/Documentation/power/video.txt
@@ -11,9 +11,9 @@ boot video card. (Kernel usually does not even contain video card
driver -- vesafb and vgacon are widely used).
This is not problem for swsusp, because during swsusp resume, BIOS is
-run normally so video card is normally initialized. S3 has absolutely
-no chance of working with SMP/HT. Be sure it to turn it off before
-testing (swsusp should work ok, OTOH).
+run normally so video card is normally initialized. It should not be
+problem for S1 standby, because hardware should retain its state over
+that.
There are a few types of systems where video works after S3 resume:
@@ -64,7 +64,7 @@ your video card (good luck getting docs :-(). Maybe suspending from X
(proper X, knowing your hardware, not XF68_FBcon) might have better
chance of working.
-Table of known working systems:
+Table of known working notebooks:
Model hack (or "how to do it")
------------------------------------------------------------------------------
@@ -73,7 +73,7 @@ Acer TM 242FX vbetool (6)
Acer TM C110 video_post (8)
Acer TM C300 vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8)
Acer TM 4052LCi s3_bios (2)
-Acer TM 636Lci s3_bios vga=normal (2)
+Acer TM 636Lci s3_bios,s3_mode (4)
Acer TM 650 (Radeon M7) vga=normal plus boot-radeon (5) gets text console back
Acer TM 660 ??? (*)
Acer TM 800 vga=normal, X patches, see webpage (5) or vbetool (6)
@@ -137,6 +137,13 @@ Toshiba Satellite P10-554 s3_bios,s3_mode (4)(****)
Toshiba M30 (2) xor X with nvidia driver using internal AGP
Uniwill 244IIO ??? (*)
+Known working desktop systems
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Mainboard Graphics card hack (or "how to do it")
+------------------------------------------------------------------------------
+Asus A7V8X nVidia RIVA TNT2 model 64 s3_bios,s3_mode (4)
+
(*) from http://www.ubuntulinux.org/wiki/HoaryPMResults, not sure
which options to use. If you know, please tell me.
diff --git a/Documentation/s390/driver-model.txt b/Documentation/s390/driver-model.txt
index 19461958e2bd..df09758bf3fe 100644
--- a/Documentation/s390/driver-model.txt
+++ b/Documentation/s390/driver-model.txt
@@ -8,11 +8,10 @@ All devices which can be addressed by means of ccws are called 'CCW devices' -
even if they aren't actually driven by ccws.
All ccw devices are accessed via a subchannel, this is reflected in the
-structures under root/:
+structures under devices/:
-root/
- - sys
- - legacy
+devices/
+ - system/
- css0/
- 0.0.0000/0.0.0815/
- 0.0.0001/0.0.4711/
@@ -36,7 +35,7 @@ availability: Can be 'good' or 'boxed'; 'no path' or 'no device' for
online: An interface to set the device online and offline.
In the special case of the device being disconnected (see the
- notify function under 1.2), piping 0 to online will focibly delete
+ notify function under 1.2), piping 0 to online will forcibly delete
the device.
The device drivers can add entries to export per-device data and interfaces.
@@ -222,7 +221,7 @@ and are called 'chp0.'. They have no driver and do not belong to any bus.
Please note, that unlike /proc/chpids in 2.4, the channel path objects reflect
only the logical state and not the physical state, since we cannot track the
latter consistently due to lacking machine support (we don't need to be aware
-of anyway).
+of it anyway).
status - Can be 'online' or 'offline'.
Piping 'on' or 'off' sets the chpid logically online/offline.
@@ -235,12 +234,16 @@ status - Can be 'online' or 'offline'.
3. System devices
-----------------
-Note: cpus may yet be added here.
-
3.1 xpram
---------
-xpram shows up under sys/ as 'xpram'.
+xpram shows up under devices/system/ as 'xpram'.
+
+3.2 cpus
+--------
+
+For each cpu, a directory is created under devices/system/cpu/. Each cpu has an
+attribute 'online' which can be 0 or 1.
4. Other devices
diff --git a/Documentation/scsi/LICENSE.qla2xxx b/Documentation/scsi/LICENSE.qla2xxx
new file mode 100644
index 000000000000..9e15b4f9cd28
--- /dev/null
+++ b/Documentation/scsi/LICENSE.qla2xxx
@@ -0,0 +1,45 @@
+Copyright (c) 2003-2005 QLogic Corporation
+QLogic Linux Fibre Channel HBA Driver
+
+This program includes a device driver for Linux 2.6 that may be
+distributed with QLogic hardware specific firmware binary file.
+You may modify and redistribute the device driver code under the
+GNU General Public License as published by the Free Software
+Foundation (version 2 or a later version).
+
+You may redistribute the hardware specific firmware binary file
+under the following terms:
+
+ 1. Redistribution of source code (only if applicable),
+ must retain the above copyright notice, this list of
+ conditions and the following disclaimer.
+
+ 2. Redistribution in binary form must reproduce the above
+ copyright notice, this list of conditions and the
+ following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ 3. The name of QLogic Corporation may not be used to
+ endorse or promote products derived from this software
+ without specific prior written permission
+
+REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,
+THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY
+EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT
+CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR
+OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
+TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
+ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
+COMBINATION WITH THIS PROGRAM.
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 13cba955cb5a..2f27f391c7cc 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -167,7 +167,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
spdif - Support SPDIF I/O
- Default: disabled
- Module supports autoprobe and multiple chips (max 8).
+ This module supports one chip and autoprobe.
The power-management is supported.
@@ -206,7 +206,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
See "AC97 Quirk Option" section below.
spdif_aclink - S/PDIF transfer over AC-link (default = 1)
- This module supports up to 8 cards and autoprobe.
+ This module supports one card and autoprobe.
ATI IXP has two different methods to control SPDIF output. One is
over AC-link and another is over the "direct" SPDIF output. The
@@ -218,7 +218,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for ATI IXP 150/200/250 AC97 modem controllers.
- Module supports up to 8 cards.
+ This module supports one card and autoprobe.
Note: The default index value of this module is -2, i.e. the first
slot is excluded.
@@ -637,7 +637,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
model - force the model name
position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
- Module supports up to 8 cards.
+ This module supports one card and autoprobe.
Each codec may have a model table for different configurations.
If your machine isn't listed there, the default (usually minimal)
@@ -663,6 +663,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y
+ ALC260
+ hp HP machines
+ fujitsu Fujitsu S7020
+
CMI9880
minimal 3-jack in back
min_fp 3-jack in back, 2-jack in front
@@ -811,7 +815,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
semaphores (e.g. on some ASUS laptops)
(default off)
- Module supports autoprobe and multiple bus-master chips (max 8).
+ This module supports one chip and autoprobe.
Note: the latest driver supports auto-detection of chip clock.
if you still encounter too fast playback, specify the clock
@@ -830,7 +834,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
ac97_clock - AC'97 codec clock base (0 = auto-detect)
- This module supports up to 8 cards and autoprobe.
+ This module supports one card and autoprobe.
Note: The default index value of this module is -2, i.e. the first
slot is excluded.
@@ -950,8 +954,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
use_cache - 0 or 1 (disabled by default)
vaio_hack - alias buffer_top=0x25a800
reset_workaround - enable AC97 RESET workaround for some laptops
+ reset_workaround2 - enable extended AC97 RESET workaround for some
+ other laptops
- Module supports autoprobe and multiple chips (max 8).
+ This module supports one chip and autoprobe.
The power-management is supported.
@@ -980,6 +986,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
workaround is enabled automatically. For other laptops with a
hard freeze, you can try reset_workaround=1 option.
+ Note: Dell Latitude CSx laptops have another problem regarding
+ AC97 RESET. On these laptops, reset_workaround2 option is
+ turned on as default. This option is worth to try if the
+ previous reset_workaround option doesn't help.
+
Note: This driver is really crappy. It's a porting from the
OSS driver, which is a result of black-magic reverse engineering.
The detection of codec will fail if the driver is loaded *after*
@@ -1310,7 +1321,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
ac97_quirk - AC'97 workaround for strange hardware
See "AC97 Quirk Option" section below.
- Module supports autoprobe and multiple bus-master chips (max 8).
+ This module supports one chip and autoprobe.
Note: on some SMP motherboards like MSI 694D the interrupts might
not be generated properly. In such a case, please try to
@@ -1352,7 +1363,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
ac97_clock - AC'97 codec clock base (default 48000Hz)
- Module supports up to 8 cards.
+ This module supports one card and autoprobe.
Note: The default index value of this module is -2, i.e. the first
slot is excluded.
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 24e85520890b..260334c98d95 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -18,8 +18,8 @@
- March 6, 2005
- 0.3.4
+ October 6, 2005
+ 0.3.5
@@ -30,7 +30,7 @@
- Copyright (c) 2002-2004 Takashi Iwai tiwai@suse.de
+ Copyright (c) 2002-2005 Takashi Iwai tiwai@suse.de
@@ -1433,25 +1433,10 @@
res_port) {
- release_resource(chip->res_port);
- kfree_nocheck(chip->res_port);
- }
+ release_and_free_resource(chip->res_port);
]]>
-
- As you can see, the resource pointer is also to be freed
- via kfree_nocheck() after
- release_resource() is called. You
- cannot use kfree() here, because on ALSA,
- kfree() may be a wrapper to its own
- allocator with the memory debugging. Since the resource pointer
- is allocated externally outside the ALSA, it must be released
- via the native
- kfree().
- kfree_nocheck() is used for that; it calls
- the native kfree() without wrapper.
@@ -2190,8 +2175,7 @@ struct _snd_pcm_runtime {
unsigned int rate_den;
/* -- SW params -- */
- int tstamp_timespec; /* use timeval (0) or timespec (1) */
- snd_pcm_tstamp_t tstamp_mode; /* mmap timestamp is updated */
+ struct timespec tstamp_mode; /* mmap timestamp is updated */
unsigned int period_step;
unsigned int sleep_min; /* min ticks to sleep */
snd_pcm_uframes_t xfer_align; /* xfer size need to be a multiple */
@@ -3709,8 +3693,7 @@ struct _snd_pcm_runtime {
Here, the chip instance is retrieved via
snd_kcontrol_chip() macro. This macro
- converts from kcontrol->private_data to the type defined by
- chip_t. The
+ just accesses to kcontrol->private_data. The
kcontrol->private_data field is
given as the argument of snd_ctl_new()
(see the later subsection
@@ -5998,32 +5981,23 @@ struct _snd_pcm_runtime {
The first argument is the expression to evaluate, and the
second argument is the action if it fails. When
CONFIG_SND_DEBUG, is set, it will show an
- error message such as BUG? (xxx) (called from
- yyy). When no debug flag is set, this is
- ignored.
+ error message such as BUG? (xxx)
+ together with stack trace.
-
-
-
- <function>snd_runtime_check()</function>
- This macro is quite similar with
- snd_assert(). Unlike
- snd_assert(), the expression is always
- evaluated regardless of
- CONFIG_SND_DEBUG. When
- CONFIG_SND_DEBUG is set, the macro will
- show a message like ERROR (xx) (called from
- yyy).
+ When no debug flag is set, this macro is ignored.
<function>snd_BUG()</function>
- It calls snd_assert(0,) -- that is, just
- prints the error message at the point. It's useful to show that
- a fatal error happens there.
+ It shows BUG? message and
+ stack trace as well as snd_assert at the point.
+ It's useful to show that a fatal error happens there.
+
+
+ When no debug flag is set, this macro is ignored.
diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt
index 1829009db771..3f1c5464b1c9 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/sparse.txt
@@ -41,9 +41,9 @@ sure that bitwise types don't get mixed up (little-endian vs big-endian
vs cpu-endian vs whatever), and there the constant "0" really _is_
special.
-Modify top-level Makefile to say
+Use
-CHECK = sparse -Wbitwise
+ make C=[12] CF=-Wbitwise
or you don't get any checking at all.
diff --git a/Documentation/video4linux/bttv/README.freeze b/Documentation/video4linux/bttv/README.freeze
index 51f8d4379a94..4259dccc8287 100644
--- a/Documentation/video4linux/bttv/README.freeze
+++ b/Documentation/video4linux/bttv/README.freeze
@@ -27,9 +27,9 @@ information out of a register+stack dump printed by the kernel on
protection faults (so-called "kernel oops").
If you run into some kind of deadlock, you can try to dump a call trace
-for each process using sysrq-t (see Documentation/sysrq.txt). ksymoops
-will translate these dumps into kernel symbols too. This way it is
-possible to figure where *exactly* some process in "D" state is stuck.
+for each process using sysrq-t (see Documentation/sysrq.txt).
+This way it is possible to figure where *exactly* some process in "D"
+state is stuck.
I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid
for some people. Thus probably a small buglet left somewhere in bttv
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index 1b9bcd1fe98b..1ad9af1ca4d0 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -13,12 +13,13 @@ This optimization is more critical now as bigger and bigger physical memories
Users can use the huge page support in Linux kernel by either using the mmap
system call or standard SYSv shared memory system calls (shmget, shmat).
-First the Linux kernel needs to be built with CONFIG_HUGETLB_PAGE (present
-under Processor types and feature) and CONFIG_HUGETLBFS (present under file
-system option on config menu) config options.
+First the Linux kernel needs to be built with the CONFIG_HUGETLBFS
+(present under "File systems") and CONFIG_HUGETLB_PAGE (selected
+automatically when CONFIG_HUGETLBFS is selected) configuration
+options.
The kernel built with hugepage support should show the number of configured
-hugepages in the system by running the "cat /proc/meminfo" command.
+hugepages in the system by running the "cat /proc/meminfo" command.
/proc/meminfo also provides information about the total number of hugetlb
pages configured in the kernel. It also displays information about the
@@ -38,19 +39,19 @@ in the kernel.
/proc/sys/vm/nr_hugepages indicates the current number of configured hugetlb
pages in the kernel. Super user can dynamically request more (or free some
-pre-configured) hugepages.
-The allocation( or deallocation) of hugetlb pages is posible only if there are
+pre-configured) hugepages.
+The allocation (or deallocation) of hugetlb pages is possible only if there are
enough physically contiguous free pages in system (freeing of hugepages is
-possible only if there are enough hugetlb pages free that can be transfered
+possible only if there are enough hugetlb pages free that can be transfered
back to regular memory pool).
Pages that are used as hugetlb pages are reserved inside the kernel and can
-not be used for other purposes.
+not be used for other purposes.
Once the kernel with Hugetlb page support is built and running, a user can
use either the mmap system call or shared memory system calls to start using
the huge pages. It is required that the system administrator preallocate
-enough memory for huge page purposes.
+enough memory for huge page purposes.
Use the following command to dynamically allocate/deallocate hugepages:
@@ -80,9 +81,9 @@ memory (huge pages) allowed for that filesystem (/mnt/huge). The size is
rounded down to HPAGE_SIZE. The option nr_inode sets the maximum number of
inodes that /mnt/huge can use. If the size or nr_inode options are not
provided on command line then no limits are set. For size and nr_inodes
-options, you can use [G|g]/[M|m]/[K|k] to represent giga/mega/kilo. For
-example, size=2K has the same meaning as size=2048. An example is given at
-the end of this document.
+options, you can use [G|g]/[M|m]/[K|k] to represent giga/mega/kilo. For
+example, size=2K has the same meaning as size=2048. An example is given at
+the end of this document.
read and write system calls are not supported on files that reside on hugetlb
file systems.
diff --git a/MAINTAINERS b/MAINTAINERS
index 983f9e9aed61..995bfd8e6e7f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -297,6 +297,11 @@ P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
+ARM/TOSA MACHINE SUPPORT
+P: Dirk Opfer
+M: dirk@opfer-online.de
+S: Maintained
+
ARM/PLEB SUPPORT
P: Peter Chubb
M: pleb@gelato.unsw.edu.au
@@ -910,6 +915,15 @@ L: linux-fbdev-devel@lists.sourceforge.net
W: http://linux-fbdev.sourceforge.net/
S: Maintained
+FREESCALE SOC FS_ENET DRIVER
+P: Pantelis Antoniou
+M: pantelis.antoniou@gmail.com
+P: Vitaly Bordug
+M: vbordug@ru.mvista.com
+L: linuxppc-embedded@ozlabs.org
+L: netdev@vger.kernel.org
+S: Maintained
+
FILE LOCKING (flock() and fcntl()/lockf())
P: Matthew Wilcox
M: matthew@wil.cx
@@ -1063,6 +1077,26 @@ P: Jaroslav Kysela
M: perex@suse.cz
S: Maintained
+HPET: High Precision Event Timers driver (hpet.c)
+P: Clemens Ladisch
+M: clemens@ladisch.de
+S: Maintained
+
+HPET: i386
+P: Venkatesh Pallipadi (Venki)
+M: venkatesh.pallipadi@intel.com
+S: Maintained
+
+HPET: x86_64
+P: Andi Kleen and Vojtech Pavlik
+M: ak@muc.de and vojtech@suse.cz
+S: Maintained
+
+HPET: ACPI hpet.c
+P: Bob Picco
+M: bob.picco@hp.com
+S: Maintained
+
HPFS FILESYSTEM
P: Mikulas Patocka
M: mikulas@artax.karlin.mff.cuni.cz
@@ -2037,6 +2071,12 @@ P: Matt Mackall
M: mpm@selenic.com
S: Maintained
+RAPIDIO SUBSYSTEM
+P: Matt Porter
+M: mporter@kernel.crashing.org
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
REAL TIME CLOCK DRIVER
P: Paul Gortmaker
M: p_gortmaker@yahoo.com
@@ -2441,10 +2481,10 @@ L: linux-kernel@vger.kernel.org
S: Maintained
TRIVIAL PATCHES
-P: Rusty Russell
-M: trivial@rustcorp.com.au
+P: Adrian Bunk
+M: trivial@kernel.org
L: linux-kernel@vger.kernel.org
-W: http://www.kernel.org/pub/linux/kernel/people/rusty/trivial/
+W: http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/
S: Maintained
TMS380 TOKEN-RING NETWORK DRIVER
diff --git a/Makefile b/Makefile
index 79601320ac3e..ea96da1572d5 100644
--- a/Makefile
+++ b/Makefile
@@ -346,7 +346,8 @@ AFLAGS_KERNEL =
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
LINUXINCLUDE := -Iinclude \
- $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include)
+ $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
+ -imacros include/linux/autoconf.h
CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
@@ -582,7 +583,7 @@ export MODLIB
ifeq ($(KBUILD_EXTMOD),)
-core-y += kernel/ mm/ fs/ ipc/ security/ crypto/
+core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/
vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
$(core-y) $(core-m) $(drivers-y) $(drivers-m) \
@@ -1249,11 +1250,6 @@ tags: FORCE
# Scripts to check various things for consistency
# ---------------------------------------------------------------------------
-configcheck:
- find * $(RCS_FIND_IGNORE) \
- -name '*.[hcS]' -type f -print | sort \
- | xargs $(PERL) -w scripts/checkconfig.pl
-
includecheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6b12d71978de..296bc03d1cf1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -704,8 +704,7 @@ source "drivers/acorn/block/Kconfig"
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
- || MACH_MP1000
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
source "drivers/ide/Kconfig"
endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index d80749ae2a7e..114cda7f1b73 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -38,6 +38,7 @@ comma = ,
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v6K) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
@@ -143,7 +144,7 @@ drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/
drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/
-libs-y += arch/arm/lib/
+libs-y := arch/arm/lib/ $(libs-y)
# Default target when executing plain make
ifeq ($(CONFIG_XIP_KERNEL),y)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index a54d2eb64892..7c7f475e213e 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -39,8 +39,7 @@
defined(CONFIG_ARCH_IXP4XX) || \
defined(CONFIG_ARCH_IXP2000) || \
defined(CONFIG_ARCH_LH7A40X) || \
- defined(CONFIG_ARCH_OMAP) || \
- defined(CONFIG_MACH_MP1000)
+ defined(CONFIG_ARCH_OMAP)
.macro loadsp, rb
addruart \rb
.endm
diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig
index 38c9a721d5c9..32bd552e0986 100644
--- a/arch/arm/configs/ixdp2401_defconfig
+++ b/arch/arm/configs/ixdp2401_defconfig
@@ -152,7 +152,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
# CONFIG_XIP_KERNEL is not set
#
@@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=3
# CONFIG_SERIAL_8250_EXTENDED is not set
#
diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig
index 12ef23d1c016..66ac0885df3e 100644
--- a/arch/arm/configs/ixdp2801_defconfig
+++ b/arch/arm/configs/ixdp2801_defconfig
@@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=3
# CONFIG_SERIAL_8250_EXTENDED is not set
#
diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/realview_defconfig
similarity index 60%
rename from arch/arm/configs/mp1000_defconfig
rename to arch/arm/configs/realview_defconfig
index d2cbc6fada1d..0485b2f1cc20 100644
--- a/arch/arm/configs/mp1000_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Fri Sep 16 15:48:13 2005
+# Linux kernel version: 2.6.14-rc2
+# Thu Sep 29 14:50:10 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -12,11 +12,9 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
@@ -24,18 +22,16 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
+# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
+# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
+# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -58,17 +54,15 @@ CONFIG_BASE_SMALL=0
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+# CONFIG_KMOD is not set
#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
-CONFIG_ARCH_CLPS711X=y
+# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
@@ -86,43 +80,43 @@ CONFIG_ARCH_CLPS711X=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_REALVIEW=y
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
#
-# CLPS711X/EP721X Implementations
+# RealView platform type
#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_FORTUNET is not set
-CONFIG_MACH_MP1000=y
-CONFIG_MP1000_90MHZ=y
+CONFIG_MACH_REALVIEW_EB=y
#
# Processor Type
#
CONFIG_CPU_32=y
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
+CONFIG_CPU_ARM926T=y
+# CONFIG_CPU_V6 is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_GIC=y
+CONFIG_ICST307=y
#
# Bus support
#
+CONFIG_ARM_AMBA=y
CONFIG_ISA_DMA_API=y
#
@@ -133,14 +127,8 @@ CONFIG_ISA_DMA_API=y
#
# Kernel Features
#
-# CONFIG_SMP is not set
-CONFIG_PREEMPT=y
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
@@ -151,7 +139,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45"
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
# CONFIG_XIP_KERNEL is not set
#
@@ -163,14 +151,14 @@ CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_me
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=y
+# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
@@ -197,10 +185,9 @@ CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
+# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
@@ -210,36 +197,14 @@ CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@@ -247,7 +212,6 @@ CONFIG_IPV6=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -269,14 +233,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -292,45 +252,36 @@ CONFIG_MTD_BLOCK=y
#
# RAM/ROM/Flash chip drivers
#
-CONFIG_MTD_CFI=m
+CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=m
-# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x0000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_EDB7312=m
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_ARM_INTEGRATOR=y
+# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -340,7 +291,6 @@ CONFIG_MTD_EDB7312=m
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
@@ -352,12 +302,7 @@ CONFIG_MTD_EDB7312=m
#
# NAND Flash Device Drivers
#
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_MP1000=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND is not set
#
# Parallel port support
@@ -372,52 +317,21 @@ CONFIG_MTD_NAND_IDS=y
# Block devices
#
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_CFQ is not set
# CONFIG_ATA_OVER_ETH is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-CONFIG_IDE_ARM=y
-CONFIG_BLK_DEV_IDE_MP1000=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
#
# SCSI device support
#
@@ -427,14 +341,7 @@ CONFIG_BLK_DEV_IDE_MP1000=y
#
# Multi-device support (RAID and LVM)
#
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
+# CONFIG_MD is not set
#
# Fusion MPT device support
@@ -444,7 +351,6 @@ CONFIG_BLK_DEV_DM=y
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
@@ -468,10 +374,9 @@ CONFIG_NETDEVICES=y
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
+CONFIG_MII=y
+CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
-CONFIG_CS89x0=y
#
# Ethernet (1000 Mbit)
@@ -496,8 +401,6 @@ CONFIG_CS89x0=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -514,17 +417,28 @@ CONFIG_INPUT=y
#
# Userland interfaces
#
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
-CONFIG_INPUT_EVBUG=y
+# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -533,8 +447,9 @@ CONFIG_INPUT_EVBUG=y
# Hardware I/O ports
#
CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -549,21 +464,19 @@ CONFIG_HW_CONSOLE=y
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CLPS711X=y
-CONFIG_SERIAL_CLPS711X_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LEGACY_PTY_COUNT=16
#
# IPMI
@@ -574,8 +487,8 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_RTC=y
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -596,9 +509,8 @@ CONFIG_RTC=y
#
# Hardware Monitoring support
#
-CONFIG_HWMON=y
+# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
@@ -621,18 +533,72 @@ CONFIG_HWMON=y
#
# Graphics support
#
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_ARMCLCD=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_ARMAACI is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
#
# USB support
@@ -654,32 +620,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
#
# File systems
#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
+# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@@ -694,8 +645,11 @@ CONFIG_DNOTIFY=y
#
# DOS/FAT/NT Filesystems
#
+CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -704,7 +658,6 @@ CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
@@ -712,22 +665,10 @@ CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=m
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
@@ -740,32 +681,16 @@ CONFIG_CRAMFS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -802,7 +727,7 @@ CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
@@ -817,35 +742,27 @@ CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
-CONFIG_PRINTK_TIME=y
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_WAITQ=y
+# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_CLPS711X_UART2 is not set
+# CONFIG_DEBUG_LL is not set
#
# Security options
@@ -856,31 +773,7 @@ CONFIG_DEBUG_LL=y
#
# Cryptographic options
#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
@@ -893,5 +786,4 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index be439cab92c6..a511ec5b11a3 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -785,7 +785,7 @@ __kuser_helper_end:
* SP points to a minimal amount of processor-private memory, the address
* of which is copied into r0 for the mode specific abort handler.
*/
- .macro vector_stub, name, correction=0
+ .macro vector_stub, name, mode, correction=0
.align 5
vector_\name:
@@ -805,15 +805,14 @@ vector_\name:
@ Prepare for SVC32 mode. IRQs remain disabled.
@
mrs r0, cpsr
- bic r0, r0, #MODE_MASK
- orr r0, r0, #SVC_MODE
+ eor r0, r0, #(\mode ^ SVC_MODE)
msr spsr_cxsf, r0
@
@ the branch table must immediately follow this code
@
- mov r0, sp
and lr, lr, #0x0f
+ mov r0, sp
ldr lr, [pc, lr, lsl #2]
movs pc, lr @ branch to handler in SVC mode
.endm
@@ -823,7 +822,7 @@ __stubs_start:
/*
* Interrupt dispatcher
*/
- vector_stub irq, 4
+ vector_stub irq, IRQ_MODE, 4
.long __irq_usr @ 0 (USR_26 / USR_32)
.long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -846,7 +845,7 @@ __stubs_start:
* Data abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
- vector_stub dabt, 8
+ vector_stub dabt, ABT_MODE, 8
.long __dabt_usr @ 0 (USR_26 / USR_32)
.long __dabt_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -869,7 +868,7 @@ __stubs_start:
* Prefetch abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
- vector_stub pabt, 4
+ vector_stub pabt, ABT_MODE, 4
.long __pabt_usr @ 0 (USR_26 / USR_32)
.long __pabt_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -892,7 +891,7 @@ __stubs_start:
* Undef instr entry dispatcher
* Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
*/
- vector_stub und
+ vector_stub und, UND_MODE
.long __und_usr @ 0 (USR_26 / USR_32)
.long __und_invalid @ 1 (FIQ_26 / FIQ_32)
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 9bd8609a2926..9a340e790da5 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -648,7 +648,7 @@ static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp)
#endif
-static int do_ptrace(int request, struct task_struct *child, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
unsigned long tmp;
int ret;
@@ -782,53 +782,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat
return ret;
}
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
-{
- struct task_struct *child;
- int ret;
-
- lock_kernel();
- ret = -EPERM;
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
- ret = security_ptrace(current->parent, current);
- if (ret)
- goto out;
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
- if (child)
- get_task_struct(child);
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
-
- ret = -EPERM;
- if (pid == 1) /* you may not mess with init */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret == 0)
- ret = do_ptrace(request, child, addr, data);
-
-out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
- return ret;
-}
-
asmlinkage void syscall_trace(int why, struct pt_regs *regs)
{
unsigned long ip;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c9b69771f92e..85774165e9fd 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -338,7 +338,8 @@ void cpu_init(void)
BUG();
}
- dump_cpu_info(cpu);
+ if (system_state == SYSTEM_BOOTING)
+ dump_cpu_info(cpu);
/*
* setup stacks for re-entrant exception handlers
@@ -838,7 +839,12 @@ static int c_show(struct seq_file *m, void *v)
#if defined(CONFIG_SMP)
for_each_online_cpu(i) {
- seq_printf(m, "Processor\t: %d\n", i);
+ /*
+ * glibc reads /proc/cpuinfo to determine the number of
+ * online processors, looking for lines beginning with
+ * "processor". Give glibc what it expects.
+ */
+ seq_printf(m, "processor\t: %d\n", i);
seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n",
per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
(per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 64a988c1ad44..f35d91fbe117 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,6 +1,6 @@
#include
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_MPCORE)
+#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K)
.macro bitop, instr
mov r2, #1
and r3, r0, #7 @ Get bit offset
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index c28449157bea..6f1b5b49fe4c 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -43,8 +43,6 @@ ENTRY(__arch_copy_to_user)
stmfd sp!, {r2, r4 - r7, lr}
cmp r2, #4
blt .c2u_not_enough
- PLD( pld [r1, #0] )
- PLD( pld [r0, #0] )
ands ip, r0, #3
bne .c2u_dest_not_aligned
.c2u_dest_aligned:
@@ -73,25 +71,13 @@ USER( strt r3, [r0], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #32
blt .c2u_0rem8lp
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
- PLD( subs ip, ip, #64 )
- PLD( blt .c2u_0cpynopld )
- PLD( pld [r1, #60] )
- PLD( pld [r0, #60] )
-.c2u_0cpy8lp:
- PLD( pld [r1, #92] )
- PLD( pld [r0, #92] )
-.c2u_0cpynopld: ldmia r1!, {r3 - r6}
+.c2u_0cpy8lp: ldmia r1!, {r3 - r6}
stmia r0!, {r3 - r6} @ Shouldnt fault
ldmia r1!, {r3 - r6}
subs ip, ip, #32
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_0cpy8lp
- PLD( cmn ip, #64 )
- PLD( bge .c2u_0cpynopld )
- PLD( add ip, ip, #64 )
.c2u_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6}
@@ -143,17 +129,8 @@ USER( strt r3, [r0], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_1rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .c2u_1cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-.c2u_1cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.c2u_1cpynopld: mov r3, r7, pull #8
+.c2u_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #24
@@ -165,9 +142,6 @@ USER( strt r3, [r0], #4) @ May fault
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_1cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .c2u_1cpynopld )
- PLD( add ip, ip, #32 )
.c2u_1rem8lp: tst ip, #8
movne r3, r7, pull #8
@@ -210,17 +184,8 @@ USER( strt r3, [r0], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_2rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .c2u_2cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-.c2u_2cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.c2u_2cpynopld: mov r3, r7, pull #16
+.c2u_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #16
@@ -232,9 +197,6 @@ USER( strt r3, [r0], #4) @ May fault
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_2cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .c2u_2cpynopld )
- PLD( add ip, ip, #32 )
.c2u_2rem8lp: tst ip, #8
movne r3, r7, pull #16
@@ -277,17 +239,8 @@ USER( strt r3, [r0], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .c2u_3rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .c2u_3cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-.c2u_3cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.c2u_3cpynopld: mov r3, r7, pull #24
+.c2u_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #8
@@ -299,9 +252,6 @@ USER( strt r3, [r0], #4) @ May fault
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6} @ Shouldnt fault
bpl .c2u_3cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .c2u_3cpynopld )
- PLD( add ip, ip, #32 )
.c2u_3rem8lp: tst ip, #8
movne r3, r7, pull #24
@@ -356,8 +306,6 @@ ENTRY(__arch_copy_from_user)
stmfd sp!, {r0, r2, r4 - r7, lr}
cmp r2, #4
blt .cfu_not_enough
- PLD( pld [r1, #0] )
- PLD( pld [r0, #0] )
ands ip, r0, #3
bne .cfu_dest_not_aligned
.cfu_dest_aligned:
@@ -385,25 +333,13 @@ USER( ldrt r3, [r1], #4)
sub r2, r2, ip
subs ip, ip, #32
blt .cfu_0rem8lp
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
- PLD( subs ip, ip, #64 )
- PLD( blt .cfu_0cpynopld )
- PLD( pld [r1, #60] )
- PLD( pld [r0, #60] )
-.cfu_0cpy8lp:
- PLD( pld [r1, #92] )
- PLD( pld [r0, #92] )
-.cfu_0cpynopld: ldmia r1!, {r3 - r6} @ Shouldnt fault
+.cfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault
stmia r0!, {r3 - r6}
ldmia r1!, {r3 - r6} @ Shouldnt fault
subs ip, ip, #32
stmia r0!, {r3 - r6}
bpl .cfu_0cpy8lp
- PLD( cmn ip, #64 )
- PLD( bge .cfu_0cpynopld )
- PLD( add ip, ip, #64 )
.cfu_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6} @ Shouldnt fault
@@ -456,17 +392,8 @@ USER( ldrt r7, [r1], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_1rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .cfu_1cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-.cfu_1cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.cfu_1cpynopld: mov r3, r7, pull #8
+.cfu_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #24
@@ -478,9 +405,6 @@ USER( ldrt r7, [r1], #4) @ May fault
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6}
bpl .cfu_1cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .cfu_1cpynopld )
- PLD( add ip, ip, #32 )
.cfu_1rem8lp: tst ip, #8
movne r3, r7, pull #8
@@ -523,17 +447,8 @@ USER( ldrt r7, [r1], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_2rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .cfu_2cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-.cfu_2cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.cfu_2cpynopld: mov r3, r7, pull #16
+.cfu_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #16
@@ -545,9 +460,6 @@ USER( ldrt r7, [r1], #4) @ May fault
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6}
bpl .cfu_2cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .cfu_2cpynopld )
- PLD( add ip, ip, #32 )
.cfu_2rem8lp: tst ip, #8
movne r3, r7, pull #16
@@ -590,17 +502,8 @@ USER( ldrt r7, [r1], #4) @ May fault
sub r2, r2, ip
subs ip, ip, #16
blt .cfu_3rem8lp
- PLD( pld [r1, #12] )
- PLD( pld [r0, #12] )
- PLD( subs ip, ip, #32 )
- PLD( blt .cfu_3cpynopld )
- PLD( pld [r1, #28] )
- PLD( pld [r0, #28] )
-.cfu_3cpy8lp:
- PLD( pld [r1, #44] )
- PLD( pld [r0, #44] )
-.cfu_3cpynopld: mov r3, r7, pull #24
+.cfu_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7} @ Shouldnt fault
orr r3, r3, r4, push #8
mov r4, r4, pull #24
@@ -612,9 +515,6 @@ USER( ldrt r7, [r1], #4) @ May fault
stmia r0!, {r3 - r6}
subs ip, ip, #16
bpl .cfu_3cpy8lp
- PLD( cmn ip, #32 )
- PLD( bge .cfu_3cpynopld )
- PLD( add ip, ip, #32 )
.cfu_3rem8lp: tst ip, #8
movne r3, r7, pull #24
diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c
index 99e019169dda..0340ddc4824e 100644
--- a/arch/arm/mach-aaec2000/clock.c
+++ b/arch/arm/mach-aaec2000/clock.c
@@ -14,6 +14,7 @@
#include
#include
#include
+#include
#include
#include
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index d5c155045762..0793dcf54f2e 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -69,17 +69,6 @@ config EP72XX_ROM_BOOT
You almost surely want to say N here.
-config MACH_MP1000
- bool "MACH_MP1000"
- help
- Say Y if you intend to run the kernel on the Comdial MP1000 platform.
-
-config MP1000_90MHZ
- bool "MP1000_90MHZ"
- depends on MACH_MP1000
- help
- Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ
-
endmenu
endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 8a6dc1ccf8fe..4a197315f0cf 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
-obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o
obj-$(CONFIG_ARCH_P720T) += p720t.o
leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
obj-$(CONFIG_LEDS) += $(leds-y)
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 72f8bb05d55e..0d52e0851251 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -55,22 +55,22 @@ static struct map_desc edb7211_io_desc[] __initdata = {
.virtual = EP7211_VIRT_EXTKBD,
.pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD),
.length = SZ_1M,
- .type - MT_DEVICE
+ .type = MT_DEVICE,
}, { /* and CS8900A Ethernet chip */
.virtual = EP7211_VIRT_CS8900A,
.pfn = __phys_to_pfn(EP7211_PHYS_CS8900A),
.length = SZ_1M,
- .type = MT_DEVICE
+ .type = MT_DEVICE,
}, { /* flash banks */
.virtual = EP7211_VIRT_FLASH1,
.pfn = __phys_to_pfn(EP7211_PHYS_FLASH1),
.length = SZ_8M,
- .type = MT_DEVICE
+ .type = MT_DEVICE,
}, {
.virtual = EP7211_VIRT_FLASH2,
.pfn = __phys_to_pfn(EP7211_PHYS_FLASH2),
.length = SZ_8M,
- .type = MT_DEVICE
+ .type = MT_DEVICE,
}
};
diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c
deleted file mode 100644
index c2816bcde5e7..000000000000
--- a/arch/arm/mach-clps711x/mp1000-mach.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/arch/arm/mach-mp1000/mp1000.c
- *
- * Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include
-#include
-#include
-
-#include
-#include
-#include
-#include
-
-#include "common.h"
-
-extern void mp1000_map_io(void);
-
-static void __init mp1000_init(void)
-{
- seprom_init();
-}
-
-MACHINE_START(MP1000, "Comdial MP1000")
- /* Maintainer: Jon Ringle */
- .phys_ram = 0xc0000000,
- .phys_io = 0x80000000,
- .io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
- .boot_params = 0xc0015100,
- .map_io = mp1000_map_io,
- .init_irq = clps711x_init_irq,
- .init_machine = mp1000_init,
- .timer = &clps711x_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c
deleted file mode 100644
index 20e810b0ec0c..000000000000
--- a/arch/arm/mach-clps711x/mp1000-mm.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/arch/arm/mach-mp1000/mm.c
- *
- * Extra MM routines for the MP1000
- *
- * Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include
-#include
-
-#include
-#include
-#include
-#include
-
-#include
-
-extern void clps711x_map_io(void);
-
-static struct map_desc mp1000_io_desc[] __initdata = {
- { MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE },
- { MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE },
- { MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE },
- { MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE },
- { MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE },
- { MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE }
-};
-
-void __init mp1000_map_io(void)
-{
- clps711x_map_io();
- iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc));
-}
diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c
deleted file mode 100644
index b22d0bebb851..000000000000
--- a/arch/arm/mach-clps711x/mp1000-seprom.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*`
- * mp1000-seprom.c
- *
- * This file contains the Serial EEPROM code for the MP1000 board
- *
- * Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include
-#include
-#include
-#include
-#include
-
-/* If SepromInit() can initialize and checksum the seprom successfully, */
-/* then it will point seprom_data_ptr at the shadow copy. */
-
-static eeprom_struct seprom_data; /* shadow copy of seprom content */
-
-eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */
-
-/*
- * Port D Bit 5 is Chip Select for EEPROM
- * Port E Bit 0 is Input, Data out from EEPROM
- * Port E Bit 1 is Output, Data in to EEPROM
- * Port E Bit 2 is Output, CLK to EEPROM
- */
-
-static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR);
-static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR);
-
-#define NO_OF_SHORTS 64 // Device is 64 x 16 bits
-#define ENABLE_RW 0
-#define DISABLE_RW 1
-
-static inline void toggle_seprom_clock(void)
-{
- *port_e_ptr |= HwPortESepromCLK;
- *port_e_ptr &= ~(HwPortESepromCLK);
-}
-
-static inline void select_eeprom(void)
-{
- *port_d_ptr |= HwPortDEECS;
- *port_e_ptr &= ~(HwPortESepromCLK);
-}
-
-static inline void deselect_eeprom(void)
-{
- *port_d_ptr &= ~(HwPortDEECS);
- *port_e_ptr &= ~(HwPortESepromDIn);
-}
-
-/*
- * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom
- * and returns 0 if seprom is not initialized or
- * has a checksum error.
- */
-
-eeprom_struct* get_seprom_ptr(void)
-{
- return seprom_data_ptr;
-}
-
-unsigned char* get_eeprom_mac_address(void)
-{
- return seprom_data_ptr->variant.eprom_struct.mac_Address;
-}
-
-/*
- * ReadSProm, Physically reads data from the Serial PROM
- */
-static void read_sprom(short address, int length, eeprom_struct *buffer)
-{
- short data = COMMAND_READ | (address & 0x3F);
- short bit;
- int i;
-
- select_eeprom();
-
- // Clock in 9 bits of the command
- for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) {
- if (data & bit)
- *port_e_ptr |= HwPortESepromDIn;
- else
- *port_e_ptr &= ~(HwPortESepromDIn);
-
- toggle_seprom_clock();
- }
-
- //
- // Now read one or more shorts of data from the Seprom
- //
- while (length-- > 0) {
- data = 0;
-
- // Read 16 bits at a time
- for (i = 0; i < 16; i++) {
- data <<= 1;
- toggle_seprom_clock();
- data |= *port_e_ptr & HwPortESepromDOut;
-
- }
-
- buffer->variant.eprom_short_data[address++] = data;
- }
-
- deselect_eeprom();
-
- return;
-}
-
-
-
-/*
- * ReadSerialPROM
- *
- * Input: Pointer to array of 64 x 16 Bits
- *
- * Output: if no problem reading data is filled in
- */
-static void read_serial_prom(eeprom_struct *data)
-{
- read_sprom(0, 64, data);
-}
-
-
-//
-// Compute Serial EEPROM checksum
-//
-// Input: Pointer to struct with Eprom data
-//
-// Output: The computed Eprom checksum
-//
-static short compute_seprom_checksum(eeprom_struct *data)
-{
- short checksum = 0;
- int i;
-
- for (i = 0; i < 126; i++) {
- checksum += (short)data->variant.eprom_byte_data[i];
- }
-
- return((short)(0x5555 - (checksum & 0xFFFF)));
-}
-
-//
-// Make sure the data port bits for the SEPROM are correctly initialised
-//
-
-void __init seprom_init(void)
-{
- short checksum;
-
- // Init Port D
- *(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0;
- *(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15;
-
- // Init Port E
- *(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06;
- *(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04;
-
- //
- // Make sure that EEPROM struct size never exceeds 128 bytes
- //
- if (sizeof(eeprom_struct) > 128) {
- panic("Serial PROM struct size > 128, aborting read\n");
- }
-
- read_serial_prom(&seprom_data);
-
- checksum = compute_seprom_checksum(&seprom_data);
-
- if (checksum != seprom_data.variant.eprom_short_data[63]) {
- panic("Serial EEPROM checksum failed\n");
- }
-
- seprom_data_ptr = &seprom_data;
-}
-
diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c
index e8832d0910ee..cfd0d2182d44 100644
--- a/arch/arm/mach-epxa10db/mm.c
+++ b/arch/arm/mach-epxa10db/mm.c
@@ -25,6 +25,7 @@
#include
#include
#include
+#include
#include
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index a1b153d1626c..a4bafee77a06 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -420,8 +420,7 @@ static int impd1_probe(struct lm_device *dev)
free_impd1:
if (impd1 && impd1->base)
iounmap(impd1->base);
- if (impd1)
- kfree(impd1);
+ kfree(impd1);
release_lm:
release_mem_region(dev->resource.start, SZ_4K);
return ret;
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index c93a98b2a32c..df140962bb0f 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -402,6 +402,40 @@ static void ixp2000_pci_irq_unmask(unsigned int irq)
ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27)));
}
+/*
+ * Error interrupts. These are used extensively by the microengine drivers
+ */
+static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+ int i;
+ unsigned long status = *IXP2000_IRQ_ERR_STATUS;
+
+ for(i = 31; i >= 0; i--) {
+ if(status & (1 << i)) {
+ desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i;
+ desc->handle(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc, regs);
+ }
+ }
+}
+
+static void ixp2000_err_irq_mask(unsigned int irq)
+{
+ ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR,
+ (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
+}
+
+static void ixp2000_err_irq_unmask(unsigned int irq)
+{
+ ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET,
+ (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
+}
+
+static struct irqchip ixp2000_err_irq_chip = {
+ .ack = ixp2000_err_irq_mask,
+ .mask = ixp2000_err_irq_mask,
+ .unmask = ixp2000_err_irq_unmask
+};
+
static struct irqchip ixp2000_pci_irq_chip = {
.ack = ixp2000_pci_irq_mask,
.mask = ixp2000_pci_irq_mask,
@@ -459,6 +493,18 @@ void __init ixp2000_init_irq(void)
} else set_irq_flags(irq, 0);
}
+ for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) {
+ if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) &
+ IXP2000_VALID_ERR_IRQ_MASK) {
+ set_irq_chip(irq, &ixp2000_err_irq_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+ else
+ set_irq_flags(irq, 0);
+ }
+ set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
+
/*
* GPIO IRQs are invalid until someone sets the interrupt mode
* by calling set_irq_type().
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 7719c478aa84..61f6006241bd 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -69,19 +69,19 @@ static struct sys_timer enp2611_timer = {
static struct map_desc enp2611_io_desc[] __initdata = {
{
.virtual = ENP2611_CALEB_VIRT_BASE,
- .physical = ENP2611_CALEB_PHYS_BASE,
+ .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
.length = ENP2611_CALEB_SIZE,
- .type = MT_IXP2000_DEVICE
+ .type = MT_IXP2000_DEVICE,
}, {
.virtual = ENP2611_PM3386_0_VIRT_BASE,
- .physical = ENP2611_PM3386_0_PHYS_BASE,
+ .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
.length = ENP2611_PM3386_0_SIZE,
- .type = MT_IXP2000_DEVICE
+ .type = MT_IXP2000_DEVICE,
}, {
.virtual = ENP2611_PM3386_1_VIRT_BASE,
- .physical = ENP2611_PM3386_1_PHYS_BASE,
+ .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
.length = ENP2611_PM3386_1_SIZE,
- .type = MT_IXP2000_DEVICE
+ .type = MT_IXP2000_DEVICE,
}
};
diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/mach-ixp2000/uengine.c
index 43e234349d4a..ec4e007a22ef 100644
--- a/arch/arm/mach-ixp2000/uengine.c
+++ b/arch/arm/mach-ixp2000/uengine.c
@@ -91,8 +91,8 @@ EXPORT_SYMBOL(ixp2000_uengine_csr_write);
void ixp2000_uengine_reset(u32 uengine_mask)
{
- ixp2000_reg_write(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask);
- ixp2000_reg_write(IXP2000_RESET1, 0);
+ ixp2000_reg_wrb(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask);
+ ixp2000_reg_wrb(IXP2000_RESET1, 0);
}
EXPORT_SYMBOL(ixp2000_uengine_reset);
@@ -452,21 +452,20 @@ static int __init ixp2000_uengine_init(void)
/*
* Reset microengines.
*/
- ixp2000_reg_write(IXP2000_RESET1, ixp2000_uengine_mask);
- ixp2000_reg_write(IXP2000_RESET1, 0);
+ ixp2000_uengine_reset(ixp2000_uengine_mask);
/*
* Synchronise timestamp counters across all microengines.
*/
value = ixp2000_reg_read(IXP2000_MISC_CONTROL);
- ixp2000_reg_write(IXP2000_MISC_CONTROL, value & ~0x80);
+ ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value & ~0x80);
for (uengine = 0; uengine < 32; uengine++) {
if (ixp2000_uengine_mask & (1 << uengine)) {
ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0);
ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0);
}
}
- ixp2000_reg_write(IXP2000_MISC_CONTROL, value | 0x80);
+ ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value | 0x80);
return 0;
}
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 2b544363c078..9795da270e3a 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void)
#ifdef __ARMEB__
*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
#else
- *PCI_CSR = PCI_CSR_IC;
+ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
#endif
pr_debug("DONE\n");
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3e5f69bb5ac4..b380a438e68f 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -27,7 +27,8 @@ config PXA_SHARPSL
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
- SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer.
+ SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
+ handheld computer.
endchoice
@@ -37,7 +38,7 @@ choice
prompt "Select target Sharp Zaurus device range"
config PXA_SHARPSL_25x
- bool "Sharp PXA25x models (SL-5600 and SL-C7xx)"
+ bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)"
select PXA25x
config PXA_SHARPSL_27x
@@ -80,6 +81,10 @@ config MACH_BORZOI
depends PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
+config MACH_TOSA
+ bool "Enable Sharp SL-6000x (Tosa) Support"
+ depends PXA_SHARPSL
+
config PXA25x
bool
help
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f609a0f232cb..8bc72d07cea8 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o
obj-$(CONFIG_MACH_POODLE) += poodle.o
+obj-$(CONFIG_MACH_TOSA) += tosa.o
# Support for blinky lights
led-y := leds.o
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 54162ba95414..698eb06545c4 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -19,6 +19,7 @@
#include
#include
#include
+#include
#include
#include
#include
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 9c6e77faec5b..b464bc88ff93 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -19,16 +19,20 @@
#include
#include
#include
+#include
+#include
#include
#include
#include
#include
#include
+#include
#include
#include
#include
+#include
#include
@@ -199,10 +203,75 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
+static struct resource flash_resources[] = {
+ [0] = {
+ .start = 0x00000000,
+ .end = SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x04000000,
+ .end = 0x04000000 + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition lubbock_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },{
+ .name = "Kernel",
+ .size = 0x00100000,
+ .offset = 0x00040000,
+ },{
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00140000
+ }
+};
+
+static struct flash_platform_data lubbock_flash_data[2] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = lubbock_partitions,
+ .nr_parts = ARRAY_SIZE(lubbock_partitions),
+ }, {
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ }
+};
+
+static struct platform_device lubbock_flash_device[2] = {
+ {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &lubbock_flash_data[0],
+ },
+ .resource = &flash_resources[0],
+ .num_resources = 1,
+ },
+ {
+ .name = "pxa2xx-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &lubbock_flash_data[1],
+ },
+ .resource = &flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
&lub_audio_device,
&smc91x_device,
+ &lubbock_flash_device[0],
+ &lubbock_flash_device[1],
};
static struct pxafb_mach_info sharp_lm8v31 __initdata = {
@@ -315,10 +384,21 @@ static struct pxaficp_platform_data lubbock_ficp_platform_data = {
static void __init lubbock_init(void)
{
+ int flashboot = (LUB_CONF_SWITCHES & 1);
+
pxa_set_udc_info(&udc_info);
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
pxa_set_ficp_info(&lubbock_ficp_platform_data);
+
+ lubbock_flash_data[0].width = lubbock_flash_data[1].width =
+ (BOOT_DEF & 1) ? 2 : 4;
+ /* Compensate for the nROMBT switch which swaps the flash banks */
+ printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
+ flashboot?"Flash":"ROM", flashboot);
+
+ lubbock_flash_data[flashboot^1].name = "application-flash";
+ lubbock_flash_data[flashboot].name = "boot-rom";
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 887a8cb7b721..07892f4012d8 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -20,6 +20,9 @@
#include
#include
#include
+#include
+#include
+#include
#include
#include
@@ -27,10 +30,12 @@
#include
#include
#include
+#include
#include
#include
#include
+#include
#include
#include
@@ -190,6 +195,69 @@ static struct platform_device mst_audio_device = {
.dev = { .platform_data = &mst_audio_ops },
};
+static struct resource flash_resources[] = {
+ [0] = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition mainstoneflash0_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },{
+ .name = "Kernel",
+ .size = 0x00400000,
+ .offset = 0x00040000,
+ },{
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00440000
+ }
+};
+
+static struct flash_platform_data mst_flash_data[2] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = mainstoneflash0_partitions,
+ .nr_parts = ARRAY_SIZE(mainstoneflash0_partitions),
+ }, {
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ }
+};
+
+static struct platform_device mst_flash_device[2] = {
+ {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mst_flash_data[0],
+ },
+ .resource = &flash_resources[0],
+ .num_resources = 1,
+ },
+ {
+ .name = "pxa2xx-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &mst_flash_data[1],
+ },
+ .resource = &flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
static void mainstone_backlight_power(int on)
{
if (on) {
@@ -318,16 +386,34 @@ static struct pxaficp_platform_data mainstone_ficp_platform_data = {
.transceiver_mode = mainstone_irda_transceiver_mode,
};
+static struct platform_device *platform_devices[] __initdata = {
+ &smc91x_device,
+ &mst_audio_device,
+ &mst_flash_device[0],
+ &mst_flash_device[1],
+};
+
static void __init mainstone_init(void)
{
+ int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
+
+ mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+ mst_flash_data[1].width = 4;
+
+ /* Compensate for SW7 which swaps the flash banks */
+ mst_flash_data[SW7].name = "processor-flash";
+ mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
+
+ printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
+ mst_flash_data[0].name);
+
/*
* On Mainstone, we route AC97_SYSCLK via GPIO45 to
* the audio daughter card
*/
pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
- platform_device_register(&smc91x_device);
- platform_device_register(&mst_audio_device);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
/* reading Mainstone's "Virtual Configuration Register"
might be handy to select LCD type here */
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index ac4dd4336160..f74b9af112dc 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -12,6 +12,7 @@
*/
#include
#include
+#include
#include
#include
#include
@@ -19,6 +20,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -72,7 +74,7 @@ enum { SLEEP_SAVE_START = 0,
};
-static int pxa_pm_enter(suspend_state_t state)
+int pxa_pm_enter(suspend_state_t state)
{
unsigned long sleep_save[SLEEP_SAVE_SIZE];
unsigned long checksum = 0;
@@ -191,6 +193,8 @@ static int pxa_pm_enter(suspend_state_t state)
return 0;
}
+EXPORT_SYMBOL_GPL(pxa_pm_enter);
+
unsigned long sleep_phys_sp(void *sp)
{
return virt_to_phys(sp);
@@ -199,21 +203,25 @@ unsigned long sleep_phys_sp(void *sp)
/*
* Called after processes are frozen, but before we shut down devices.
*/
-static int pxa_pm_prepare(suspend_state_t state)
+int pxa_pm_prepare(suspend_state_t state)
{
extern int pxa_cpu_pm_prepare(suspend_state_t state);
return pxa_cpu_pm_prepare(state);
}
+EXPORT_SYMBOL_GPL(pxa_pm_prepare);
+
/*
* Called after devices are re-setup, but before processes are thawed.
*/
-static int pxa_pm_finish(suspend_state_t state)
+int pxa_pm_finish(suspend_state_t state)
{
return 0;
}
+EXPORT_SYMBOL_GPL(pxa_pm_finish);
+
/*
* Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
*/
@@ -230,4 +238,4 @@ static int __init pxa_pm_init(void)
return 0;
}
-late_initcall(pxa_pm_init);
+device_initcall(pxa_pm_init);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
new file mode 100644
index 000000000000..400609f8b6a8
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa.c
@@ -0,0 +1,162 @@
+/*
+ * Support for Sharp SL-C6000x PDAs
+ * Model: (Tosa)
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * Based on code written by Sharp/Lineo for 2.4 kernels
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+
+#include
+#include
+#include
+
+#include
+#include
+
+#include "generic.h"
+
+
+/*
+ * SCOOP Device
+ */
+static struct resource tosa_scoop_resources[] = {
+ [0] = {
+ .start = TOSA_CF_PHYS,
+ .end = TOSA_CF_PHYS + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config tosa_scoop_setup = {
+ .io_dir = TOSA_SCOOP_IO_DIR,
+ .io_out = TOSA_SCOOP_IO_OUT,
+
+};
+
+struct platform_device tosascoop_device = {
+ .name = "sharp-scoop",
+ .id = 0,
+ .dev = {
+ .platform_data = &tosa_scoop_setup,
+ },
+ .num_resources = ARRAY_SIZE(tosa_scoop_resources),
+ .resource = tosa_scoop_resources,
+};
+
+
+/*
+ * SCOOP Device Jacket
+ */
+static struct resource tosa_scoop_jc_resources[] = {
+ [0] = {
+ .start = TOSA_SCOOP_PHYS + 0x40,
+ .end = TOSA_SCOOP_PHYS + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct scoop_config tosa_scoop_jc_setup = {
+ .io_dir = TOSA_SCOOP_JC_IO_DIR,
+ .io_out = TOSA_SCOOP_JC_IO_OUT,
+};
+
+struct platform_device tosascoop_jc_device = {
+ .name = "sharp-scoop",
+ .id = 1,
+ .dev = {
+ .platform_data = &tosa_scoop_jc_setup,
+ .parent = &tosascoop_device.dev,
+ },
+ .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources),
+ .resource = tosa_scoop_jc_resources,
+};
+
+static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
+{
+ .dev = &tosascoop_device.dev,
+ .irq = TOSA_IRQ_GPIO_CF_IRQ,
+ .cd_irq = TOSA_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+},{
+ .dev = &tosascoop_jc_device.dev,
+ .irq = TOSA_IRQ_GPIO_JC_CF_IRQ,
+ .cd_irq = -1,
+},
+};
+
+
+static struct platform_device *devices[] __initdata = {
+ &tosascoop_device,
+ &tosascoop_jc_device,
+};
+
+static void __init tosa_init(void)
+{
+ pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
+ pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
+
+ /* setup sleep mode values */
+ PWER = 0x00000002;
+ PFER = 0x00000000;
+ PRER = 0x00000002;
+ PGSR0 = 0x00000000;
+ PGSR1 = 0x00FF0002;
+ PGSR2 = 0x00014000;
+ PCFR |= PCFR_OPDE;
+
+ // enable batt_fault
+ PMCR = 0x01;
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ scoop_num = 2;
+ scoop_devs = &tosa_pcmcia_scoop[0];
+}
+
+static void __init fixup_tosa(struct machine_desc *desc,
+ struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+ sharpsl_save_param();
+ mi->nr_banks=1;
+ mi->bank[0].start = 0xa0000000;
+ mi->bank[0].node = 0;
+ mi->bank[0].size = (64*1024*1024);
+}
+
+MACHINE_START(TOSA, "SHARP Tosa")
+ .phys_ram = 0xa0000000,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .fixup = fixup_tosa,
+ .map_io = pxa_map_io,
+ .init_irq = pxa_init_irq,
+ .init_machine = tosa_init,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 5568403e984d..e3c14d6b4328 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -250,6 +250,18 @@ config CPU_V6
select CPU_COPY_V6
select CPU_TLB_V6
+# ARMv6k
+config CPU_32v6K
+ bool "Support ARM V6K processor extensions" if !SMP
+ depends on CPU_V6
+ default y if SMP
+ help
+ Say Y here if your ARMv6 processor supports the 'K' extension.
+ This enables the kernel to use some instructions not present
+ on previous processors, and as such a kernel build with this
+ enabled will not boot on processors with do not support these
+ instructions.
+
# Figure out what processor architecture version we should be using.
# This defines the compiler instruction set which depends on the machine type.
config CPU_32v3
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index 1221fdde1769..fb5b40289de2 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -469,14 +469,14 @@ void __init create_mapping(struct map_desc *md)
if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
printk(KERN_WARNING "BUG: not creating mapping for "
- "0x%016llx at 0x%08lx in user region\n",
+ "0x%08llx at 0x%08lx in user region\n",
__pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
- printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx "
+ printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
"overlaps vmalloc space\n",
__pfn_to_phys((u64)md->pfn), md->virtual);
}
@@ -492,14 +492,14 @@ void __init create_mapping(struct map_desc *md)
if(md->pfn >= 0x100000) {
if(domain) {
printk(KERN_ERR "MM: invalid domain in supersection "
- "mapping for 0x%016llx at 0x%08lx\n",
+ "mapping for 0x%08llx at 0x%08lx\n",
__pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
if((md->virtual | md->length | __pfn_to_phys(md->pfn))
& ~SUPERSECTION_MASK) {
printk(KERN_ERR "MM: cannot create mapping for "
- "0x%016llx at 0x%08lx invalid alignment\n",
+ "0x%08llx at 0x%08lx invalid alignment\n",
__pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
diff --git a/arch/arm26/kernel/ptrace.c b/arch/arm26/kernel/ptrace.c
index cf7e977d18c8..4e6b7356a722 100644
--- a/arch/arm26/kernel/ptrace.c
+++ b/arch/arm26/kernel/ptrace.c
@@ -546,7 +546,7 @@ static int ptrace_setfpregs(struct task_struct *tsk, void *ufp)
sizeof(struct user_fp)) ? -EFAULT : 0;
}
-static int do_ptrace(int request, struct task_struct *child, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
unsigned long tmp;
int ret;
@@ -665,53 +665,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat
return ret;
}
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
-{
- struct task_struct *child;
- int ret;
-
- lock_kernel();
- ret = -EPERM;
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
- ret = security_ptrace(current->parent, current);
- if (ret)
- goto out;
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
- if (child)
- get_task_struct(child);
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
-
- ret = -EPERM;
- if (pid == 1) /* you may not mess with init */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret == 0)
- ret = do_ptrace(request, child, addr, data);
-
-out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
- return ret;
-}
-
asmlinkage void syscall_trace(int why, struct pt_regs *regs)
{
unsigned long ip;
diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm
index 6f08903f3139..517d1f027fe8 100644
--- a/arch/cris/arch-v10/README.mm
+++ b/arch/cris/arch-v10/README.mm
@@ -177,7 +177,7 @@ The example address is 0xd004000c; in binary this is:
Given the top-level Page Directory, the offset in that directory is calculated
using the upper 8 bits:
-extern inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address)
+static inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address)
{
return mm->pgd + (address >> PGDIR_SHIFT);
}
@@ -190,14 +190,14 @@ The pgd_t from our example will therefore be the 208'th (0xd0) entry in mm->pgd.
Since the Middle Directory does not exist, it is a unity mapping:
-extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
{
return (pmd_t *) dir;
}
The Page Table provides the final lookup by using bits 13 to 23 as index:
-extern inline pte_t * pte_offset(pmd_t * dir, unsigned long address)
+static inline pte_t * pte_offset(pmd_t * dir, unsigned long address)
{
return (pte_t *) pmd_page(*dir) + ((address >> PAGE_SHIFT) &
(PTRS_PER_PTE - 1));
diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c
index 130dd214e41d..6cbd34a27b90 100644
--- a/arch/cris/arch-v10/kernel/ptrace.c
+++ b/arch/cris/arch-v10/kernel/ptrace.c
@@ -76,55 +76,11 @@ ptrace_disable(struct task_struct *child)
* (in user space) where the result of the ptrace call is written (instead of
* being returned).
*/
-asmlinkage int
-sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- struct task_struct *child;
int ret;
unsigned long __user *datap = (unsigned long __user *)data;
- lock_kernel();
- ret = -EPERM;
-
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
- ret = security_ptrace(current->parent, current);
- if (ret)
- goto out;
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
-
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
-
- if (child)
- get_task_struct(child);
-
- read_unlock(&tasklist_lock);
-
- if (!child)
- goto out;
-
- ret = -EPERM;
-
- if (pid == 1) /* Leave the init process alone! */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
-
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
-
switch (request) {
/* Read word at location address. */
case PTRACE_PEEKTEXT:
@@ -289,10 +245,7 @@ sys_ptrace(long request, long pid, long addr, long data)
ret = ptrace_request(child, request, addr, data);
break;
}
-out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
+
return ret;
}
diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c
index 693771961f85..19bcad05716f 100644
--- a/arch/cris/arch-v10/kernel/signal.c
+++ b/arch/cris/arch-v10/kernel/signal.c
@@ -476,7 +476,7 @@ give_sigsegv:
* OK, we're invoking a handler
*/
-extern inline void
+static inline void
handle_signal(int canrestart, unsigned long sig,
siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs * regs)
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index ca72076c630a..501fa52d8d3a 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -277,7 +277,7 @@ struct file_operations cryptocop_fops = {
static void free_cdesc(struct cryptocop_dma_desc *cdesc)
{
DEBUG(printk("free_cdesc: cdesc 0x%p, from_pool=%d\n", cdesc, cdesc->from_pool));
- if (cdesc->free_buf) kfree(cdesc->free_buf);
+ kfree(cdesc->free_buf);
if (cdesc->from_pool) {
unsigned long int flags;
@@ -2950,15 +2950,15 @@ static int cryptocop_ioctl_process(struct inode *inode, struct file *filp, unsig
put_page(outpages[i]);
}
- if (digest_result) kfree(digest_result);
- if (inpages) kfree(inpages);
- if (outpages) kfree(outpages);
+ kfree(digest_result);
+ kfree(inpages);
+ kfree(outpages);
if (cop){
- if (cop->tfrm_op.indata) kfree(cop->tfrm_op.indata);
- if (cop->tfrm_op.outdata) kfree(cop->tfrm_op.outdata);
+ kfree(cop->tfrm_op.indata);
+ kfree(cop->tfrm_op.outdata);
kfree(cop);
}
- if (jc) kfree(jc);
+ kfree(jc);
DEBUG(print_lock_status());
diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c
index 208489da2a87..5528b83a622b 100644
--- a/arch/cris/arch-v32/kernel/ptrace.c
+++ b/arch/cris/arch-v32/kernel/ptrace.c
@@ -99,55 +99,11 @@ ptrace_disable(struct task_struct *child)
}
-asmlinkage int
-sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- struct task_struct *child;
int ret;
unsigned long __user *datap = (unsigned long __user *)data;
- lock_kernel();
- ret = -EPERM;
-
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
- ret = security_ptrace(current->parent, current);
- if (ret)
- goto out;
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
-
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
-
- if (child)
- get_task_struct(child);
-
- read_unlock(&tasklist_lock);
-
- if (!child)
- goto out;
-
- ret = -EPERM;
-
- if (pid == 1) /* Leave the init process alone! */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
-
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
-
switch (request) {
/* Read word at location address. */
case PTRACE_PEEKTEXT:
@@ -347,10 +303,7 @@ sys_ptrace(long request, long pid, long addr, long data)
ret = ptrace_request(child, request, addr, data);
break;
}
-out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
+
return ret;
}
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
index 0a3614dab887..99e59b3eacf8 100644
--- a/arch/cris/arch-v32/kernel/signal.c
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -513,7 +513,7 @@ give_sigsegv:
}
/* Invoke a singal handler to, well, handle the signal. */
-extern inline void
+static inline void
handle_signal(int canrestart, unsigned long sig,
siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs * regs)
diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c
index a92ac9877582..1780df3ed9e5 100644
--- a/arch/cris/mm/ioremap.c
+++ b/arch/cris/mm/ioremap.c
@@ -16,7 +16,7 @@
#include
#include
-extern inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
+static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
unsigned long phys_addr, pgprot_t prot)
{
unsigned long end;
diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c
index cb335a14a315..f953484e7d59 100644
--- a/arch/frv/kernel/ptrace.c
+++ b/arch/frv/kernel/ptrace.c
@@ -106,48 +106,11 @@ void ptrace_enable(struct task_struct *child)
child->thread.frame0->__status |= REG__STATUS_STEP;
}
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- struct task_struct *child;
unsigned long tmp;
int ret;
- lock_kernel();
- ret = -EPERM;
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
- ret = security_ptrace(current->parent, current);
- if (ret)
- goto out;
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
- if (child)
- get_task_struct(child);
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
-
- ret = -EPERM;
- if (pid == 1) /* you may not mess with init */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
-
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
-
switch (request) {
/* when I and D space are separate, these will need to be fixed. */
case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -351,10 +314,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
ret = -EIO;
break;
}
-out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
return ret;
}
diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c
index a569fe4aa284..0ff6f79b0fed 100644
--- a/arch/h8300/kernel/ptrace.c
+++ b/arch/h8300/kernel/ptrace.c
@@ -57,43 +57,10 @@ void ptrace_disable(struct task_struct *child)
h8300_disable_trace(child);
}
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- struct task_struct *child;
int ret;
- lock_kernel();
- ret = -EPERM;
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
- if (child)
- get_task_struct(child);
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
-
- ret = -EPERM;
- if (pid == 1) /* you may not mess with init */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
-
switch (request) {
case PTRACE_PEEKTEXT: /* read word at location addr. */
case PTRACE_PEEKDATA: {
@@ -251,10 +218,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
ret = -EIO;
break;
}
-out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
return ret;
}
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index bac0da731ee3..dbf90ad6eac3 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -997,8 +997,21 @@ source "drivers/Kconfig"
source "fs/Kconfig"
+menu "Instrumentation Support"
+ depends on EXPERIMENTAL
+
source "arch/i386/oprofile/Kconfig"
+config KPROBES
+ bool "Kprobes (EXPERIMENTAL)"
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+endmenu
+
source "arch/i386/Kconfig.debug"
source "security/Kconfig"
diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug
index 5228c40a6fb2..c48b424dd640 100644
--- a/arch/i386/Kconfig.debug
+++ b/arch/i386/Kconfig.debug
@@ -22,16 +22,6 @@ config DEBUG_STACKOVERFLOW
This option will cause messages to be printed if free stack space
drops below a certain limit.
-config KPROBES
- bool "Kprobes"
- depends on DEBUG_KERNEL
- help
- Kprobes allows you to trap at almost any kernel address and
- execute a callback function. register_kprobe() establishes
- a probepoint and specifies the callback. Kprobes is useful
- for kernel debugging, non-intrusive instrumentation and testing.
- If in doubt, say "N".
-
config DEBUG_STACK_USAGE
bool "Stack utilization instrumentation"
depends on DEBUG_KERNEL
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 7c724ffa08bb..496a2c9909fe 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -559,14 +559,20 @@ void __devinit setup_local_APIC(void)
* If Linux enabled the LAPIC against the BIOS default
* disable it down before re-entering the BIOS on shutdown.
* Otherwise the BIOS may get confused and not power-off.
+ * Additionally clear all LVT entries before disable_local_APIC
+ * for the case where Linux didn't enable the LAPIC.
*/
void lapic_shutdown(void)
{
- if (!cpu_has_apic || !enabled_via_apicbase)
+ if (!cpu_has_apic)
return;
local_irq_disable();
- disable_local_APIC();
+ clear_local_APIC();
+
+ if (enabled_via_apicbase)
+ disable_local_APIC();
+
local_irq_enable();
}
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
index d2ef0c2aa93e..86e80c551478 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/i386/kernel/apm.c
@@ -447,8 +447,7 @@ static char * apm_event_name[] = {
"system standby resume",
"capabilities change"
};
-#define NR_APM_EVENT_NAME \
- (sizeof(apm_event_name) / sizeof(apm_event_name[0]))
+#define NR_APM_EVENT_NAME ARRAY_SIZE(apm_event_name)
typedef struct lookup_t {
int key;
@@ -479,7 +478,7 @@ static const lookup_t error_table[] = {
{ APM_NO_ERROR, "BIOS did not set a return code" },
{ APM_NOT_PRESENT, "No APM present" }
};
-#define ERROR_COUNT (sizeof(error_table)/sizeof(lookup_t))
+#define ERROR_COUNT ARRAY_SIZE(error_table)
/**
* apm_error - display an APM error
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index 74145a33cb0f..c145fb30002e 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -30,8 +30,6 @@ static int disable_x86_serial_nr __devinitdata = 1;
struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
-extern void mcheck_init(struct cpuinfo_x86 *c);
-
extern int disable_pse;
static void default_init(struct cpuinfo_x86 * c)
@@ -429,9 +427,8 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c)
}
/* Init Machine Check Exception if available. */
-#ifdef CONFIG_X86_MCE
mcheck_init(c);
-#endif
+
if (c == &boot_cpu_data)
sysenter_setup();
enable_sep_cpu();
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index 1465974256c9..0ea010a7afb1 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -67,7 +67,7 @@ static const struct cpu_id cpu_ids[] = {
[CPU_MP4HT_D0] = {15, 3, 4 },
[CPU_MP4HT_E0] = {15, 4, 1 },
};
-#define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0]))
+#define N_IDS ARRAY_SIZE(cpu_ids)
struct cpu_model
{
diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/i386/kernel/cpu/mcheck/k7.c
index 7c6b9c73522f..fc5d5215e23d 100644
--- a/arch/i386/kernel/cpu/mcheck/k7.c
+++ b/arch/i386/kernel/cpu/mcheck/k7.c
@@ -68,7 +68,7 @@ static fastcall void k7_machine_check(struct pt_regs * regs, long error_code)
/* AMD K7 machine check is Intel like */
-void __devinit amd_mcheck_init(struct cpuinfo_x86 *c)
+void amd_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
int i;
diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c
index 2cf25d2ba0f1..6170af3c271a 100644
--- a/arch/i386/kernel/cpu/mcheck/mce.c
+++ b/arch/i386/kernel/cpu/mcheck/mce.c
@@ -16,7 +16,7 @@
#include "mce.h"
-int mce_disabled __devinitdata = 0;
+int mce_disabled = 0;
int nr_mce_banks;
EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */
@@ -31,7 +31,7 @@ static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_
void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
/* This has to be run for each processor */
-void __devinit mcheck_init(struct cpuinfo_x86 *c)
+void mcheck_init(struct cpuinfo_x86 *c)
{
if (mce_disabled==1)
return;
diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c
index 1d1e885f500a..fd2c459a31ef 100644
--- a/arch/i386/kernel/cpu/mcheck/p4.c
+++ b/arch/i386/kernel/cpu/mcheck/p4.c
@@ -77,7 +77,7 @@ fastcall void smp_thermal_interrupt(struct pt_regs *regs)
}
/* P4/Xeon Thermal regulation detect and init */
-static void __devinit intel_init_thermal(struct cpuinfo_x86 *c)
+static void intel_init_thermal(struct cpuinfo_x86 *c)
{
u32 l, h;
unsigned int cpu = smp_processor_id();
@@ -231,7 +231,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
}
-void __devinit intel_p4_mcheck_init(struct cpuinfo_x86 *c)
+void intel_p4_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
int i;
diff --git a/arch/i386/kernel/cpu/mcheck/p5.c b/arch/i386/kernel/cpu/mcheck/p5.c
index 3a2e24baddc7..94bc43d950cf 100644
--- a/arch/i386/kernel/cpu/mcheck/p5.c
+++ b/arch/i386/kernel/cpu/mcheck/p5.c
@@ -28,7 +28,7 @@ static fastcall void pentium_machine_check(struct pt_regs * regs, long error_cod
}
/* Set up machine check reporting for processors with Intel style MCE */
-void __devinit intel_p5_mcheck_init(struct cpuinfo_x86 *c)
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c
index 979b18bc95c1..deeae42ce199 100644
--- a/arch/i386/kernel/cpu/mcheck/p6.c
+++ b/arch/i386/kernel/cpu/mcheck/p6.c
@@ -79,7 +79,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
}
/* Set up machine check reporting for processors with Intel style MCE */
-void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c)
+void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
int i;
diff --git a/arch/i386/kernel/cpu/mcheck/winchip.c b/arch/i386/kernel/cpu/mcheck/winchip.c
index 5b9d2dd411d3..9e424b6c293d 100644
--- a/arch/i386/kernel/cpu/mcheck/winchip.c
+++ b/arch/i386/kernel/cpu/mcheck/winchip.c
@@ -22,7 +22,7 @@ static fastcall void winchip_machine_check(struct pt_regs * regs, long error_cod
}
/* Set up machine check reporting on the Winchip C6 series */
-void __devinit winchip_mcheck_init(struct cpuinfo_x86 *c)
+void winchip_mcheck_init(struct cpuinfo_x86 *c)
{
u32 lo, hi;
machine_check_vector = winchip_machine_check;
diff --git a/arch/i386/kernel/ioport.c b/arch/i386/kernel/ioport.c
index f2b37654777f..b59a34dbe262 100644
--- a/arch/i386/kernel/ioport.c
+++ b/arch/i386/kernel/ioport.c
@@ -108,8 +108,11 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
/*
* Sets the lazy trigger so that the next I/O operation will
* reload the correct bitmap.
+ * Reset the owner so that a process switch will not set
+ * tss->io_bitmap_base to IO_BITMAP_OFFSET.
*/
tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
+ tss->io_bitmap_owner = NULL;
put_cpu();
diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c
index 6345b430b105..32b0c24ab9a6 100644
--- a/arch/i386/kernel/kprobes.c
+++ b/arch/i386/kernel/kprobes.c
@@ -31,22 +31,16 @@
#include
#include
#include
-#include
#include
#include
#include
#include
-static struct kprobe *current_kprobe;
-static unsigned long kprobe_status, kprobe_old_eflags, kprobe_saved_eflags;
-static struct kprobe *kprobe_prev;
-static unsigned long kprobe_status_prev, kprobe_old_eflags_prev, kprobe_saved_eflags_prev;
-static struct pt_regs jprobe_saved_regs;
-static long *jprobe_saved_esp;
-/* copy of the kernel stack at the probe fire time */
-static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
void jprobe_return_end(void);
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
/*
* returns non-zero if opcode modifies the interrupt flag.
*/
@@ -91,29 +85,30 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
{
}
-static inline void save_previous_kprobe(void)
+static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
{
- kprobe_prev = current_kprobe;
- kprobe_status_prev = kprobe_status;
- kprobe_old_eflags_prev = kprobe_old_eflags;
- kprobe_saved_eflags_prev = kprobe_saved_eflags;
+ kcb->prev_kprobe.kp = kprobe_running();
+ kcb->prev_kprobe.status = kcb->kprobe_status;
+ kcb->prev_kprobe.old_eflags = kcb->kprobe_old_eflags;
+ kcb->prev_kprobe.saved_eflags = kcb->kprobe_saved_eflags;
}
-static inline void restore_previous_kprobe(void)
+static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
{
- current_kprobe = kprobe_prev;
- kprobe_status = kprobe_status_prev;
- kprobe_old_eflags = kprobe_old_eflags_prev;
- kprobe_saved_eflags = kprobe_saved_eflags_prev;
+ __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+ kcb->kprobe_status = kcb->prev_kprobe.status;
+ kcb->kprobe_old_eflags = kcb->prev_kprobe.old_eflags;
+ kcb->kprobe_saved_eflags = kcb->prev_kprobe.saved_eflags;
}
-static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs)
+static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
{
- current_kprobe = p;
- kprobe_saved_eflags = kprobe_old_eflags
+ __get_cpu_var(current_kprobe) = p;
+ kcb->kprobe_saved_eflags = kcb->kprobe_old_eflags
= (regs->eflags & (TF_MASK | IF_MASK));
if (is_IF_modifier(p->opcode))
- kprobe_saved_eflags &= ~IF_MASK;
+ kcb->kprobe_saved_eflags &= ~IF_MASK;
}
static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
@@ -127,6 +122,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
regs->eip = (unsigned long)&p->ainsn.insn;
}
+/* Called with kretprobe_lock held */
void __kprobes arch_prepare_kretprobe(struct kretprobe *rp,
struct pt_regs *regs)
{
@@ -157,9 +153,15 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
int ret = 0;
kprobe_opcode_t *addr = NULL;
unsigned long *lp;
+ struct kprobe_ctlblk *kcb;
- /* We're in an interrupt, but this is clear and BUG()-safe. */
+ /*
+ * We don't want to be preempted for the entire
+ * duration of kprobe processing
+ */
preempt_disable();
+ kcb = get_kprobe_ctlblk();
+
/* Check if the application is using LDT entry for its code segment and
* calculate the address by reading the base address from the LDT entry.
*/
@@ -173,15 +175,12 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
}
/* Check we're not actually recursing */
if (kprobe_running()) {
- /* We *are* holding lock here, so this is safe.
- Disarm the probe we just hit, and ignore it. */
p = get_kprobe(addr);
if (p) {
- if (kprobe_status == KPROBE_HIT_SS &&
+ if (kcb->kprobe_status == KPROBE_HIT_SS &&
*p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
regs->eflags &= ~TF_MASK;
- regs->eflags |= kprobe_saved_eflags;
- unlock_kprobes();
+ regs->eflags |= kcb->kprobe_saved_eflags;
goto no_kprobe;
}
/* We have reentered the kprobe_handler(), since
@@ -190,26 +189,23 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
* just single step on the instruction of the new probe
* without calling any user handlers.
*/
- save_previous_kprobe();
- set_current_kprobe(p, regs);
+ save_previous_kprobe(kcb);
+ set_current_kprobe(p, regs, kcb);
p->nmissed++;
prepare_singlestep(p, regs);
- kprobe_status = KPROBE_REENTER;
+ kcb->kprobe_status = KPROBE_REENTER;
return 1;
} else {
- p = current_kprobe;
+ p = __get_cpu_var(current_kprobe);
if (p->break_handler && p->break_handler(p, regs)) {
goto ss_probe;
}
}
- /* If it's not ours, can't be delete race, (we hold lock). */
goto no_kprobe;
}
- lock_kprobes();
p = get_kprobe(addr);
if (!p) {
- unlock_kprobes();
if (regs->eflags & VM_MASK) {
/* We are in virtual-8086 mode. Return 0 */
goto no_kprobe;
@@ -232,8 +228,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
goto no_kprobe;
}
- kprobe_status = KPROBE_HIT_ACTIVE;
- set_current_kprobe(p, regs);
+ set_current_kprobe(p, regs, kcb);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
if (p->pre_handler && p->pre_handler(p, regs))
/* handler has already set things up, so skip ss setup */
@@ -241,7 +237,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
ss_probe:
prepare_singlestep(p, regs);
- kprobe_status = KPROBE_HIT_SS;
+ kcb->kprobe_status = KPROBE_HIT_SS;
return 1;
no_kprobe:
@@ -269,9 +265,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
struct kretprobe_instance *ri = NULL;
struct hlist_head *head;
struct hlist_node *node, *tmp;
- unsigned long orig_ret_address = 0;
+ unsigned long flags, orig_ret_address = 0;
unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
+ spin_lock_irqsave(&kretprobe_lock, flags);
head = kretprobe_inst_table_head(current);
/*
@@ -310,14 +307,15 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address));
regs->eip = orig_ret_address;
- unlock_kprobes();
+ reset_current_kprobe();
+ spin_unlock_irqrestore(&kretprobe_lock, flags);
preempt_enable_no_resched();
- /*
- * By returning a non-zero value, we are telling
- * kprobe_handler() that we have handled unlocking
- * and re-enabling preemption.
- */
+ /*
+ * By returning a non-zero value, we are telling
+ * kprobe_handler() that we don't want the post_handler
+ * to run (and have re-enabled preemption)
+ */
return 1;
}
@@ -343,7 +341,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
* that is atop the stack is the address following the copied instruction.
* We need to make it the address following the original instruction.
*/
-static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes resume_execution(struct kprobe *p,
+ struct pt_regs *regs, struct kprobe_ctlblk *kcb)
{
unsigned long *tos = (unsigned long *)®s->esp;
unsigned long next_eip = 0;
@@ -353,7 +352,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
switch (p->ainsn.insn[0]) {
case 0x9c: /* pushfl */
*tos &= ~(TF_MASK | IF_MASK);
- *tos |= kprobe_old_eflags;
+ *tos |= kcb->kprobe_old_eflags;
break;
case 0xc3: /* ret/lret */
case 0xcb:
@@ -394,27 +393,30 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
/*
* Interrupts are disabled on entry as trap1 is an interrupt gate and they
- * remain disabled thoroughout this function. And we hold kprobe lock.
+ * remain disabled thoroughout this function.
*/
static inline int post_kprobe_handler(struct pt_regs *regs)
{
- if (!kprobe_running())
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ if (!cur)
return 0;
- if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) {
- kprobe_status = KPROBE_HIT_SSDONE;
- current_kprobe->post_handler(current_kprobe, regs, 0);
+ if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ cur->post_handler(cur, regs, 0);
}
- resume_execution(current_kprobe, regs);
- regs->eflags |= kprobe_saved_eflags;
+ resume_execution(cur, regs, kcb);
+ regs->eflags |= kcb->kprobe_saved_eflags;
/*Restore back the original saved kprobes variables and continue. */
- if (kprobe_status == KPROBE_REENTER) {
- restore_previous_kprobe();
+ if (kcb->kprobe_status == KPROBE_REENTER) {
+ restore_previous_kprobe(kcb);
goto out;
}
- unlock_kprobes();
+ reset_current_kprobe();
out:
preempt_enable_no_resched();
@@ -429,18 +431,19 @@ out:
return 1;
}
-/* Interrupts disabled, kprobe_lock held. */
static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
{
- if (current_kprobe->fault_handler
- && current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
return 1;
- if (kprobe_status & KPROBE_HIT_SS) {
- resume_execution(current_kprobe, regs);
- regs->eflags |= kprobe_old_eflags;
+ if (kcb->kprobe_status & KPROBE_HIT_SS) {
+ resume_execution(cur, regs, kcb);
+ regs->eflags |= kcb->kprobe_old_eflags;
- unlock_kprobes();
+ reset_current_kprobe();
preempt_enable_no_resched();
}
return 0;
@@ -453,39 +456,41 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
struct die_args *args = (struct die_args *)data;
+ int ret = NOTIFY_DONE;
+
switch (val) {
case DIE_INT3:
if (kprobe_handler(args->regs))
- return NOTIFY_STOP;
+ ret = NOTIFY_STOP;
break;
case DIE_DEBUG:
if (post_kprobe_handler(args->regs))
- return NOTIFY_STOP;
+ ret = NOTIFY_STOP;
break;
case DIE_GPF:
- if (kprobe_running() &&
- kprobe_fault_handler(args->regs, args->trapnr))
- return NOTIFY_STOP;
- break;
case DIE_PAGE_FAULT:
+ /* kprobe_running() needs smp_processor_id() */
+ preempt_disable();
if (kprobe_running() &&
kprobe_fault_handler(args->regs, args->trapnr))
- return NOTIFY_STOP;
+ ret = NOTIFY_STOP;
+ preempt_enable();
break;
default:
break;
}
- return NOTIFY_DONE;
+ return ret;
}
int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
{
struct jprobe *jp = container_of(p, struct jprobe, kp);
unsigned long addr;
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- jprobe_saved_regs = *regs;
- jprobe_saved_esp = ®s->esp;
- addr = (unsigned long)jprobe_saved_esp;
+ kcb->jprobe_saved_regs = *regs;
+ kcb->jprobe_saved_esp = ®s->esp;
+ addr = (unsigned long)(kcb->jprobe_saved_esp);
/*
* TBD: As Linus pointed out, gcc assumes that the callee
@@ -494,7 +499,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
* we also save and restore enough stack bytes to cover
* the argument area.
*/
- memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr));
+ memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr,
+ MIN_STACK_SIZE(addr));
regs->eflags &= ~IF_MASK;
regs->eip = (unsigned long)(jp->entry);
return 1;
@@ -502,36 +508,40 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
void __kprobes jprobe_return(void)
{
- preempt_enable_no_resched();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
asm volatile (" xchgl %%ebx,%%esp \n"
" int3 \n"
" .globl jprobe_return_end \n"
" jprobe_return_end: \n"
" nop \n"::"b"
- (jprobe_saved_esp):"memory");
+ (kcb->jprobe_saved_esp):"memory");
}
int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
u8 *addr = (u8 *) (regs->eip - 1);
- unsigned long stack_addr = (unsigned long)jprobe_saved_esp;
+ unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_esp);
struct jprobe *jp = container_of(p, struct jprobe, kp);
if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) {
- if (®s->esp != jprobe_saved_esp) {
+ if (®s->esp != kcb->jprobe_saved_esp) {
struct pt_regs *saved_regs =
- container_of(jprobe_saved_esp, struct pt_regs, esp);
+ container_of(kcb->jprobe_saved_esp,
+ struct pt_regs, esp);
printk("current esp %p does not match saved esp %p\n",
- ®s->esp, jprobe_saved_esp);
+ ®s->esp, kcb->jprobe_saved_esp);
printk("Saved registers for jprobe %p\n", jp);
show_registers(saved_regs);
printk("Current registers\n");
show_registers(regs);
BUG();
}
- *regs = jprobe_saved_regs;
- memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack,
+ *regs = kcb->jprobe_saved_regs;
+ memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack,
MIN_STACK_SIZE(stack_addr));
+ preempt_enable_no_resched();
return 1;
}
return 0;
diff --git a/arch/i386/kernel/ldt.c b/arch/i386/kernel/ldt.c
index fe1ffa55587d..983f95707e11 100644
--- a/arch/i386/kernel/ldt.c
+++ b/arch/i386/kernel/ldt.c
@@ -18,6 +18,7 @@
#include
#include
#include
+#include
#ifdef CONFIG_SMP /* avoids "defined but not used" warnig */
static void flush_ldt(void *null)
diff --git a/arch/i386/kernel/mca.c b/arch/i386/kernel/mca.c
index 8600faeea29d..558bb207720f 100644
--- a/arch/i386/kernel/mca.c
+++ b/arch/i386/kernel/mca.c
@@ -132,7 +132,7 @@ static struct resource mca_standard_resources[] = {
{ .start = 0x100, .end = 0x107, .name = "POS (MCA)" }
};
-#define MCA_STANDARD_RESOURCES (sizeof(mca_standard_resources)/sizeof(struct resource))
+#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources)
/**
* mca_read_and_store_pos - read the POS registers into a memory buffer
diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c
index efd11f09c996..5ffbb4b7ad05 100644
--- a/arch/i386/kernel/ptrace.c
+++ b/arch/i386/kernel/ptrace.c
@@ -354,49 +354,12 @@ ptrace_set_thread_area(struct task_struct *child,
return 0;
}
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- struct task_struct *child;
struct user * dummy = NULL;
int i, ret;
unsigned long __user *datap = (unsigned long __user *)data;
- lock_kernel();
- ret = -EPERM;
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
- ret = security_ptrace(current->parent, current);
- if (ret)
- goto out;
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
- if (child)
- get_task_struct(child);
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
-
- ret = -EPERM;
- if (pid == 1) /* you may not mess with init */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
-
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
-
switch (request) {
/* when I and D space are separate, these will need to be fixed. */
case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -663,10 +626,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
ret = ptrace_request(child, request, addr, data);
break;
}
-out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
+ out_tsk:
return ret;
}
diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c
index c9b87330aeea..10e21a4773dd 100644
--- a/arch/i386/kernel/reboot_fixups.c
+++ b/arch/i386/kernel/reboot_fixups.c
@@ -10,6 +10,7 @@
#include
#include
+#include
static void cs5530a_warm_reset(struct pci_dev *dev)
{
@@ -42,7 +43,7 @@ void mach_reboot_fixups(void)
struct pci_dev *dev;
int i;
- for (i=0; i < (sizeof(fixups_table)/sizeof(fixups_table[0])); i++) {
+ for (i=0; i < ARRAY_SIZE(fixups_table); i++) {
cur = &(fixups_table[i]);
dev = pci_get_device(cur->vendor, cur->device, NULL);
if (!dev)
diff --git a/arch/i386/kernel/scx200.c b/arch/i386/kernel/scx200.c
index 69e203a0d330..9c968ae67c43 100644
--- a/arch/i386/kernel/scx200.c
+++ b/arch/i386/kernel/scx200.c
@@ -12,6 +12,7 @@
#include
#include
+#include
/* Verify that the configuration block really is there */
#define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base))
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 01b618e73ecd..47ec76794d02 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -68,11 +68,9 @@ EXPORT_SYMBOL(smp_num_siblings);
/* Package ID of each logical CPU */
int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID};
-EXPORT_SYMBOL(phys_proc_id);
/* Core ID of each logical CPU */
int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID};
-EXPORT_SYMBOL(cpu_core_id);
cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(cpu_sibling_map);
@@ -612,7 +610,7 @@ static inline void __inquire_remote_apic(int apicid)
printk("Inquiring remote APIC #%d...\n", apicid);
- for (i = 0; i < sizeof(regs) / sizeof(*regs); i++) {
+ for (i = 0; i < ARRAY_SIZE(regs); i++) {
printk("... APIC #%d %s: ", apicid, names[i]);
/*
diff --git a/arch/i386/oprofile/Kconfig b/arch/i386/oprofile/Kconfig
index 5ade19801b97..d8a84088471a 100644
--- a/arch/i386/oprofile/Kconfig
+++ b/arch/i386/oprofile/Kconfig
@@ -1,7 +1,3 @@
-
-menu "Profiling support"
- depends on EXPERIMENTAL
-
config PROFILING
bool "Profiling support (EXPERIMENTAL)"
help
@@ -19,5 +15,3 @@ config OPROFILE
If unsure, say N.
-endmenu
-
diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c
index 1f1572692e0b..50a0bef8c85f 100644
--- a/arch/i386/power/cpu.c
+++ b/arch/i386/power/cpu.c
@@ -118,6 +118,7 @@ void __restore_processor_state(struct saved_context *ctxt)
fix_processor_context();
do_fpu_end();
mtrr_ap_init();
+ mcheck_init(&boot_cpu_data);
}
void restore_processor_state(void)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index eb784046130d..d4de8a4814be 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -427,8 +427,21 @@ config GENERIC_PENDING_IRQ
source "arch/ia64/hp/sim/Kconfig"
+menu "Instrumentation Support"
+ depends on EXPERIMENTAL
+
source "arch/ia64/oprofile/Kconfig"
+config KPROBES
+ bool "Kprobes (EXPERIMENTAL)"
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+endmenu
+
source "arch/ia64/Kconfig.debug"
source "security/Kconfig"
diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug
index fda67ac993d7..de9d507ba0fd 100644
--- a/arch/ia64/Kconfig.debug
+++ b/arch/ia64/Kconfig.debug
@@ -2,17 +2,6 @@ menu "Kernel hacking"
source "lib/Kconfig.debug"
-config KPROBES
- bool "Kprobes"
- depends on DEBUG_KERNEL
- help
- Kprobes allows you to trap at almost any kernel address and
- execute a callback function. register_kprobe() establishes
- a probepoint and specifies the callback. Kprobes is useful
- for kernel debugging, non-intrusive instrumentation and testing.
- If in doubt, say "N".
-
-
choice
prompt "Physical memory granularity"
default IA64_GRANULE_64MB
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index b42ec37be51c..19ee635eeb70 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -642,10 +642,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
info->event = 0;
info->tty = 0;
if (info->blocked_open) {
- if (info->close_delay) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(info->close_delay);
- }
+ if (info->close_delay)
+ schedule_timeout_interruptible(info->close_delay);
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 471086b808a4..96736a119c91 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -26,7 +26,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -38,13 +37,8 @@
extern void jprobe_inst_return(void);
-/* kprobe_status settings */
-#define KPROBE_HIT_ACTIVE 0x00000001
-#define KPROBE_HIT_SS 0x00000002
-
-static struct kprobe *current_kprobe, *kprobe_prev;
-static unsigned long kprobe_status, kprobe_status_prev;
-static struct pt_regs jprobe_saved_regs;
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
enum instruction_type {A, I, M, F, B, L, X, u};
static enum instruction_type bundle_encoding[32][3] = {
@@ -313,21 +307,22 @@ static int __kprobes valid_kprobe_addr(int template, int slot,
return 0;
}
-static inline void save_previous_kprobe(void)
+static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
{
- kprobe_prev = current_kprobe;
- kprobe_status_prev = kprobe_status;
+ kcb->prev_kprobe.kp = kprobe_running();
+ kcb->prev_kprobe.status = kcb->kprobe_status;
}
-static inline void restore_previous_kprobe(void)
+static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
{
- current_kprobe = kprobe_prev;
- kprobe_status = kprobe_status_prev;
+ __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+ kcb->kprobe_status = kcb->prev_kprobe.status;
}
-static inline void set_current_kprobe(struct kprobe *p)
+static inline void set_current_kprobe(struct kprobe *p,
+ struct kprobe_ctlblk *kcb)
{
- current_kprobe = p;
+ __get_cpu_var(current_kprobe) = p;
}
static void kretprobe_trampoline(void)
@@ -347,10 +342,11 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
struct kretprobe_instance *ri = NULL;
struct hlist_head *head;
struct hlist_node *node, *tmp;
- unsigned long orig_ret_address = 0;
+ unsigned long flags, orig_ret_address = 0;
unsigned long trampoline_address =
((struct fnptr *)kretprobe_trampoline)->ip;
+ spin_lock_irqsave(&kretprobe_lock, flags);
head = kretprobe_inst_table_head(current);
/*
@@ -389,17 +385,19 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address));
regs->cr_iip = orig_ret_address;
- unlock_kprobes();
+ reset_current_kprobe();
+ spin_unlock_irqrestore(&kretprobe_lock, flags);
preempt_enable_no_resched();
- /*
- * By returning a non-zero value, we are telling
- * kprobe_handler() that we have handled unlocking
- * and re-enabling preemption.
- */
+ /*
+ * By returning a non-zero value, we are telling
+ * kprobe_handler() that we don't want the post_handler
+ * to run (and have re-enabled preemption)
+ */
return 1;
}
+/* Called with kretprobe_lock held */
void __kprobes arch_prepare_kretprobe(struct kretprobe *rp,
struct pt_regs *regs)
{
@@ -606,17 +604,22 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
int ret = 0;
struct pt_regs *regs = args->regs;
kprobe_opcode_t *addr = (kprobe_opcode_t *)instruction_pointer(regs);
+ struct kprobe_ctlblk *kcb;
+ /*
+ * We don't want to be preempted for the entire
+ * duration of kprobe processing
+ */
preempt_disable();
+ kcb = get_kprobe_ctlblk();
/* Handle recursion cases */
if (kprobe_running()) {
p = get_kprobe(addr);
if (p) {
- if ( (kprobe_status == KPROBE_HIT_SS) &&
+ if ((kcb->kprobe_status == KPROBE_HIT_SS) &&
(p->ainsn.inst_flag == INST_FLAG_BREAK_INST)) {
ia64_psr(regs)->ss = 0;
- unlock_kprobes();
goto no_kprobe;
}
/* We have reentered the pre_kprobe_handler(), since
@@ -625,17 +628,17 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
* just single step on the instruction of the new probe
* without calling any user handlers.
*/
- save_previous_kprobe();
- set_current_kprobe(p);
+ save_previous_kprobe(kcb);
+ set_current_kprobe(p, kcb);
p->nmissed++;
prepare_ss(p, regs);
- kprobe_status = KPROBE_REENTER;
+ kcb->kprobe_status = KPROBE_REENTER;
return 1;
} else if (args->err == __IA64_BREAK_JPROBE) {
/*
* jprobe instrumented function just completed
*/
- p = current_kprobe;
+ p = __get_cpu_var(current_kprobe);
if (p->break_handler && p->break_handler(p, regs)) {
goto ss_probe;
}
@@ -645,10 +648,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
}
}
- lock_kprobes();
p = get_kprobe(addr);
if (!p) {
- unlock_kprobes();
if (!is_ia64_break_inst(regs)) {
/*
* The breakpoint instruction was removed right
@@ -665,8 +666,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
goto no_kprobe;
}
- kprobe_status = KPROBE_HIT_ACTIVE;
- set_current_kprobe(p);
+ set_current_kprobe(p, kcb);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
if (p->pre_handler && p->pre_handler(p, regs))
/*
@@ -678,7 +679,7 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
ss_probe:
prepare_ss(p, regs);
- kprobe_status = KPROBE_HIT_SS;
+ kcb->kprobe_status = KPROBE_HIT_SS;
return 1;
no_kprobe:
@@ -688,23 +689,25 @@ no_kprobe:
static int __kprobes post_kprobes_handler(struct pt_regs *regs)
{
- if (!kprobe_running())
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ if (!cur)
return 0;
- if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) {
- kprobe_status = KPROBE_HIT_SSDONE;
- current_kprobe->post_handler(current_kprobe, regs, 0);
+ if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ cur->post_handler(cur, regs, 0);
}
- resume_execution(current_kprobe, regs);
+ resume_execution(cur, regs);
/*Restore back the original saved kprobes variables and continue. */
- if (kprobe_status == KPROBE_REENTER) {
- restore_previous_kprobe();
+ if (kcb->kprobe_status == KPROBE_REENTER) {
+ restore_previous_kprobe(kcb);
goto out;
}
-
- unlock_kprobes();
+ reset_current_kprobe();
out:
preempt_enable_no_resched();
@@ -713,16 +716,15 @@ out:
static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr)
{
- if (!kprobe_running())
- return 0;
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- if (current_kprobe->fault_handler &&
- current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+ if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
return 1;
- if (kprobe_status & KPROBE_HIT_SS) {
- resume_execution(current_kprobe, regs);
- unlock_kprobes();
+ if (kcb->kprobe_status & KPROBE_HIT_SS) {
+ resume_execution(cur, regs);
+ reset_current_kprobe();
preempt_enable_no_resched();
}
@@ -733,31 +735,38 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
struct die_args *args = (struct die_args *)data;
+ int ret = NOTIFY_DONE;
+
switch(val) {
case DIE_BREAK:
if (pre_kprobes_handler(args))
- return NOTIFY_STOP;
+ ret = NOTIFY_STOP;
break;
case DIE_SS:
if (post_kprobes_handler(args->regs))
- return NOTIFY_STOP;
+ ret = NOTIFY_STOP;
break;
case DIE_PAGE_FAULT:
- if (kprobes_fault_handler(args->regs, args->trapnr))
- return NOTIFY_STOP;
+ /* kprobe_running() needs smp_processor_id() */
+ preempt_disable();
+ if (kprobe_running() &&
+ kprobes_fault_handler(args->regs, args->trapnr))
+ ret = NOTIFY_STOP;
+ preempt_enable();
default:
break;
}
- return NOTIFY_DONE;
+ return ret;
}
int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
{
struct jprobe *jp = container_of(p, struct jprobe, kp);
unsigned long addr = ((struct fnptr *)(jp->entry))->ip;
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
/* save architectural state */
- jprobe_saved_regs = *regs;
+ kcb->jprobe_saved_regs = *regs;
/* after rfi, execute the jprobe instrumented function */
regs->cr_iip = addr & ~0xFULL;
@@ -775,7 +784,10 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
{
- *regs = jprobe_saved_regs;
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ *regs = kcb->jprobe_saved_regs;
+ preempt_enable_no_resched();
return 1;
}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index f7dfc107cb7b..410d4804fa6e 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -4940,7 +4940,7 @@ abort_locked:
if (call_made && PFM_CMD_RW_ARG(cmd) && copy_to_user(arg, args_k, base_sz*count)) ret = -EFAULT;
error_args:
- if (args_k) kfree(args_k);
+ kfree(args_k);
DPRINT(("cmd=%s ret=%ld\n", PFM_CMD_NAME(cmd), ret));
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index fc56ca2da358..3af6de36a482 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -92,6 +92,13 @@ extern void efi_initialize_iomem_resources(struct resource *,
extern char _text[], _end[], _etext[];
unsigned long ia64_max_cacheline_size;
+
+int dma_get_cache_alignment(void)
+{
+ return ia64_max_cacheline_size;
+}
+EXPORT_SYMBOL(dma_get_cache_alignment);
+
unsigned long ia64_iobase; /* virtual address for I/O accesses */
EXPORT_SYMBOL(ia64_iobase);
struct io_space io_space[MAX_IO_SPACES];
diff --git a/arch/ia64/oprofile/Kconfig b/arch/ia64/oprofile/Kconfig
index 56e6f614b04a..97271ab484dc 100644
--- a/arch/ia64/oprofile/Kconfig
+++ b/arch/ia64/oprofile/Kconfig
@@ -1,7 +1,3 @@
-
-menu "Profiling support"
- depends on EXPERIMENTAL
-
config PROFILING
bool "Profiling support (EXPERIMENTAL)"
help
@@ -22,5 +18,3 @@ config OPROFILE
If unsure, say N.
-endmenu
-
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index 6df7fb60dfea..e79bbc94216d 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -212,10 +212,8 @@ int atari_tt_hwclk( int op, struct rtc_time *t )
* additionally the RTC_SET bit is set to prevent an update cycle.
*/
- while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(HWCLK_POLL_INTERVAL);
- }
+ while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP )
+ schedule_timeout_interruptible(HWCLK_POLL_INTERVAL);
local_irq_save(flags);
RTC_WRITE( RTC_CONTROL, ctrl | RTC_SET );
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index f7f1d2e5b90b..7e54422685cf 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -121,48 +121,11 @@ void ptrace_disable(struct task_struct *child)
child->thread.work.syscall_trace = 0;
}
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- struct task_struct *child;
unsigned long tmp;
int i, ret = 0;
- lock_kernel();
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED) {
- ret = -EPERM;
- goto out;
- }
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- goto out;
- }
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
- if (child)
- get_task_struct(child);
- read_unlock(&tasklist_lock);
- if (unlikely(!child)) {
- ret = -ESRCH;
- goto out;
- }
-
- /* you may not mess with init */
- if (unlikely(pid == 1)) {
- ret = -EPERM;
- goto out_tsk;
- }
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
-
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret)
- goto out_tsk;
-
switch (request) {
/* when I and D space are separate, these will need to be fixed. */
case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -317,14 +280,10 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
ret = ptrace_request(child, request, addr, data);
break;
}
-out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
+
return ret;
out_eio:
- ret = -EIO;
- goto out_tsk;
+ return -EIO;
}
asmlinkage void syscall_trace(void)
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 8520df9cee6d..b96498120fe9 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -71,6 +71,11 @@ config M5206e
help
Motorola ColdFire 5206e processor support.
+config M520x
+ bool "MCF520x"
+ help
+ Freescale Coldfire 5207/5208 processor support.
+
config M523x
bool "MCF523x"
help
@@ -120,7 +125,7 @@ config M527x
config COLDFIRE
bool
- depends on (M5206 || M5206e || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407)
+ depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407)
default y
choice
@@ -322,6 +327,12 @@ config ELITE
help
Support for the Motorola M5206eLITE board.
+config M5208EVB
+ bool "Freescale M5208EVB board support"
+ depends on M520x
+ help
+ Support for the Freescale Coldfire M5208EVB.
+
config M5235EVB
bool "Freescale M5235EVB support"
depends on M523x
@@ -465,10 +476,10 @@ config ARNEWSH
default y
depends on (ARN5206 || ARN5307)
-config MOTOROLA
+config FREESCALE
bool
default y
- depends on (M5206eC3 || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3)
+ depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3)
config HW_FEITH
bool
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index b8fdf191b8f6..b6b5c14e55fd 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -14,6 +14,7 @@ platform-$(CONFIG_M68VZ328) := 68VZ328
platform-$(CONFIG_M68360) := 68360
platform-$(CONFIG_M5206) := 5206
platform-$(CONFIG_M5206e) := 5206e
+platform-$(CONFIG_M520x) := 520x
platform-$(CONFIG_M523x) := 523x
platform-$(CONFIG_M5249) := 5249
platform-$(CONFIG_M527x) := 527x
@@ -29,7 +30,7 @@ board-$(CONFIG_UCDIMM) := ucdimm
board-$(CONFIG_UCQUICC) := uCquicc
board-$(CONFIG_DRAGEN2) := de2
board-$(CONFIG_ARNEWSH) := ARNEWSH
-board-$(CONFIG_MOTOROLA) := MOTOROLA
+board-$(CONFIG_FREESCALE) := FREESCALE
board-$(CONFIG_M5235EVB) := M5235EVB
board-$(CONFIG_M5271EVB) := M5271EVB
board-$(CONFIG_M5275EVB) := M5275EVB
@@ -41,6 +42,7 @@ board-$(CONFIG_SECUREEDGEMP3) := MP3
board-$(CONFIG_CLEOPATRA) := CLEOPATRA
board-$(CONFIG_senTec) := senTec
board-$(CONFIG_SNEHA) := SNEHA
+board-$(CONFIG_M5208EVB) := M5208EVB
board-$(CONFIG_MOD5272) := MOD5272
BOARD := $(board-y)
@@ -56,6 +58,7 @@ MODEL := $(model-y)
#
cpuclass-$(CONFIG_M5206) := 5307
cpuclass-$(CONFIG_M5206e) := 5307
+cpuclass-$(CONFIG_M520x) := 5307
cpuclass-$(CONFIG_M523x) := 5307
cpuclass-$(CONFIG_M5249) := 5307
cpuclass-$(CONFIG_M527x) := 5307
@@ -80,6 +83,7 @@ export PLATFORM BOARD MODEL CPUCLASS
#
cflags-$(CONFIG_M5206) := -m5200 -Wa,-S -Wa,-m5200
cflags-$(CONFIG_M5206e) := -m5200 -Wa,-S -Wa,-m5200
+cflags-$(CONFIG_M520x) := -m5307 -Wa,-S -Wa,-m5307
cflags-$(CONFIG_M523x) := -m5307 -Wa,-S -Wa,-m5307
cflags-$(CONFIG_M5249) := -m5200 -Wa,-S -Wa,-m5200
cflags-$(CONFIG_M527x) := -m5307 -Wa,-S -Wa,-m5307
@@ -95,7 +99,6 @@ cflags-$(CONFIG_M68360) := -m68332
AFLAGS += $(cflags-y)
CFLAGS += $(cflags-y)
-CFLAGS += -fno-builtin
CFLAGS += -O1 -g
CFLAGS += -D__linux__
CFLAGS += -DUTS_SYSNAME=\"uClinux\"
diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c
index cd3ffe12653e..b988c7bdc6e4 100644
--- a/arch/m68knommu/kernel/asm-offsets.c
+++ b/arch/m68knommu/kernel/asm-offsets.c
@@ -15,6 +15,7 @@
#include
#include
#include
+#include
#include
#define DEFINE(sym, val) \
diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c
index 621d7b91ccfe..262ab8c72e5f 100644
--- a/arch/m68knommu/kernel/ptrace.c
+++ b/arch/m68knommu/kernel/ptrace.c
@@ -101,43 +101,10 @@ void ptrace_disable(struct task_struct *child)
put_reg(child, PT_SR, tmp);
}
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(truct task_struct *child, long request, long addr, long data)
{
- struct task_struct *child;
int ret;
- lock_kernel();
- ret = -EPERM;
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
- if (child)
- get_task_struct(child);
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
-
- ret = -EPERM;
- if (pid == 1) /* you may not mess with init */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
-
switch (request) {
/* when I and D space are separate, these will need to be fixed. */
case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -357,10 +324,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
ret = -EIO;
break;
}
-out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
return ret;
}
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index a220345e9746..abb80fa2b940 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -107,6 +107,9 @@ void (*mach_power_off)( void ) = NULL;
#if defined(CONFIG_M5206e)
#define CPU "COLDFIRE(m5206e)"
#endif
+#if defined(CONFIG_M520x)
+ #define CPU "COLDFIRE(m520x)"
+#endif
#if defined(CONFIG_M523x)
#define CPU "COLDFIRE(m523x)"
#endif
@@ -132,7 +135,7 @@ void (*mach_power_off)( void ) = NULL;
#define CPU "COLDFIRE(m5407)"
#endif
#ifndef CPU
- #define CPU "UNKOWN"
+ #define CPU "UNKNOWN"
#endif
/* (es) */
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 47f06787190d..0eab92ca4b97 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -124,6 +124,14 @@
#define RAM_LENGTH 0x3e0000
#endif
+/*
+ * The Freescale 5208EVB board has 32MB of RAM.
+ */
+#if defined(CONFIG_M5208EVB)
+#define RAM_START 0x40020000
+#define RAM_LENGTH 0x01e00000
+#endif
+
/*
* The senTec COBRA5272 board has nearly the same memory layout as
* the M5272C3. We assume 16MiB ram.
@@ -275,6 +283,7 @@ SECTIONS {
*(__ksymtab_strings)
/* Built-in module parameters */
+ . = ALIGN(4) ;
__start___param = .;
*(__param)
__stop___param = .;
diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile
new file mode 100644
index 000000000000..e861b05106bc
--- /dev/null
+++ b/arch/m68knommu/platform/520x/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for the M5208 specific file.
+#
+
+#
+# If you want to play with the HW breakpoints then you will
+# need to add define this, which will give you a stack backtrace
+# on the console port whenever a DBG interrupt occurs. You have to
+# set up you HW breakpoints to trigger a DBG interrupt:
+#
+# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
+# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+#
+
+ifdef CONFIG_FULLDEBUG
+AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
+endif
+
+obj-y := config.o
diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
new file mode 100644
index 000000000000..71dea2e0f452
--- /dev/null
+++ b/arch/m68knommu/platform/520x/config.c
@@ -0,0 +1,65 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/520x/config.c
+ *
+ * Copyright (C) 2005, Freescale (www.freescale.com)
+ * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com)
+ * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include
+#include
+#include
+#include
+#include
+
+/***************************************************************************/
+
+/*
+ * DMA channel base address table.
+ */
+unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+/***************************************************************************/
+
+void coldfire_pit_tick(void);
+void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
+unsigned long coldfire_pit_offset(void);
+void coldfire_trap_init(void);
+void coldfire_reset(void);
+
+/***************************************************************************/
+
+/*
+ * Program the vector to be an auto-vectored.
+ */
+
+void mcf_autovector(unsigned int vec)
+{
+ /* Everything is auto-vectored on the 520x devices */
+}
+
+/***************************************************************************/
+
+void config_BSP(char *commandp, int size)
+{
+#ifdef CONFIG_BOOTPARAM
+ strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
+ commandp[size-1] = 0;
+#else
+ memset(commandp, 0, size);
+#endif
+
+ mach_sched_init = coldfire_pit_init;
+ mach_tick = coldfire_pit_tick;
+ mach_gettimeoffset = coldfire_pit_offset;
+ mach_trap_init = coldfire_trap_init;
+ mach_reset = coldfire_reset;
+}
+
+/***************************************************************************/
diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile
index 6fe5a2b8fb08..8d1619dc1ea6 100644
--- a/arch/m68knommu/platform/5307/Makefile
+++ b/arch/m68knommu/platform/5307/Makefile
@@ -19,6 +19,7 @@ endif
obj-$(CONFIG_COLDFIRE) += entry.o vectors.o ints.o
obj-$(CONFIG_M5206) += timers.o
obj-$(CONFIG_M5206e) += timers.o
+obj-$(CONFIG_M520x) += pit.o
obj-$(CONFIG_M523x) += pit.o
obj-$(CONFIG_M5249) += timers.o
obj-$(CONFIG_M527x) += pit.o
diff --git a/arch/m68knommu/platform/5307/head.S b/arch/m68knommu/platform/5307/head.S
index 7f4ba837901f..c30c462b99b1 100644
--- a/arch/m68knommu/platform/5307/head.S
+++ b/arch/m68knommu/platform/5307/head.S
@@ -113,6 +113,9 @@
#define MEM_BASE 0x02000000
#define VBR_BASE 0x20000000 /* vectors in SRAM */
#endif
+#if defined(CONFIG_M5208EVB)
+#define MEM_BASE 0x40000000
+#endif
#ifndef MEM_BASE
#define MEM_BASE 0x00000000 /* memory base at address 0 */
diff --git a/arch/m68knommu/platform/5307/ints.c b/arch/m68knommu/platform/5307/ints.c
index 0117754d44f3..a134fb2f0566 100644
--- a/arch/m68knommu/platform/5307/ints.c
+++ b/arch/m68knommu/platform/5307/ints.c
@@ -26,6 +26,7 @@
#include
#include
+#include
#include
#include
#include
diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c
index a9b2c2e7e280..323f2677e49d 100644
--- a/arch/m68knommu/platform/5307/pit.c
+++ b/arch/m68knommu/platform/5307/pit.c
@@ -3,7 +3,7 @@
/*
* pit.c -- Motorola ColdFire PIT timer. Currently this type of
* hardware timer only exists in the Motorola ColdFire
- * 5270/5271 and 5282 CPUs.
+ * 5270/5271, 5282 and other CPUs.
*
* Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
@@ -47,10 +47,10 @@ void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *))
icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 +
MCFINTC_ICR0 + MCFINT_PIT1);
- *icrp = 0x2b; /* PIT1 with level 5, priority 3 */
+ *icrp = ICR_INTRCONF;
- imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
- *imrp &= ~(1 << (MCFINT_PIT1 - 32));
+ imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR);
+ *imrp &= ~MCFPIT_IMR_IBIT;
/* Set up PIT timer 1 as poll clock */
tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1);
@@ -70,7 +70,7 @@ unsigned long coldfire_pit_offset(void)
unsigned long pmr, pcntr, offset;
tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1);
- ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IPRH);
+ ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR);
pmr = *(&tp->pmr);
pcntr = *(&tp->pcntr);
@@ -80,7 +80,7 @@ unsigned long coldfire_pit_offset(void)
* timer interupt is pending, then add on a ticks worth of time.
*/
offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr;
- if ((offset < (1000000 / HZ / 2)) && (*ipr & (1 << (MCFINT_PIT1 - 32))))
+ if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT))
offset += 1000000 / HZ;
return offset;
}
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index f1b0f3e1f95b..510da5fda567 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -174,51 +174,10 @@ int ptrace_setfpregs (struct task_struct *child, __u32 __user *data)
return 0;
}
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- struct task_struct *child;
int ret;
-#if 0
- printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n",
- (int) request, (int) pid, (unsigned long) addr,
- (unsigned long) data);
-#endif
- lock_kernel();
- ret = -EPERM;
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
- if ((ret = security_ptrace(current->parent, current)))
- goto out;
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
- if (child)
- get_task_struct(child);
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
-
- ret = -EPERM;
- if (pid == 1) /* you may not mess with init */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
-
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
-
switch (request) {
/* when I and D space are separate, these will need to be fixed. */
case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -319,7 +278,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
if (!cpu_has_dsp) {
tmp = 0;
ret = -EIO;
- goto out_tsk;
+ goto out;
}
if (child->thread.dsp.used_dsp) {
dregs = __get_dsp_regs(child);
@@ -333,14 +292,14 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
if (!cpu_has_dsp) {
tmp = 0;
ret = -EIO;
- goto out_tsk;
+ goto out;
}
tmp = child->thread.dsp.dspcontrol;
break;
default:
tmp = 0;
ret = -EIO;
- goto out_tsk;
+ goto out;
}
ret = put_user(tmp, (unsigned long __user *) data);
break;
@@ -495,11 +454,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
ret = ptrace_request(child, request, addr, data);
break;
}
-
-out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
+ out:
return ret;
}
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index 18130c3748f3..b6fe202a620d 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -78,52 +78,13 @@ void ptrace_disable(struct task_struct *child)
pa_psw(child)->l = 0;
}
-long sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- struct task_struct *child;
long ret;
#ifdef DEBUG_PTRACE
long oaddr=addr, odata=data;
#endif
- lock_kernel();
- ret = -EPERM;
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
-
- ret = security_ptrace(current->parent, current);
- if (ret)
- goto out;
-
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
-
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
- if (child)
- get_task_struct(child);
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
- ret = -EPERM;
- if (pid == 1) /* no messing around with init! */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
-
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
-
switch (request) {
case PTRACE_PEEKTEXT: /* read word at location addr. */
case PTRACE_PEEKDATA: {
@@ -383,11 +344,11 @@ long sys_ptrace(long request, long pid, long addr, long data)
case PTRACE_GETEVENTMSG:
ret = put_user(child->ptrace_message, (unsigned int __user *) data);
- goto out_tsk;
+ goto out;
default:
ret = ptrace_request(child, request, addr, data);
- goto out_tsk;
+ goto out;
}
out_wake_notrap:
@@ -396,10 +357,7 @@ out_wake:
wake_up_process(child);
ret = 0;
out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
- DBG("sys_ptrace(%ld, %d, %lx, %lx) returning %ld\n",
+ DBG("arch_ptrace(%ld, %d, %lx, %lx) returning %ld\n",
request, pid, oaddr, odata, ret);
return ret;
}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 967ecf92d6a7..6ffae2d2b3fa 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -300,6 +300,7 @@ config PPC_PMAC64
bool
depends on PPC_PMAC && POWER4
select U3_DART
+ select GENERIC_TBSYNC
default y
config PPC_PREP
@@ -314,15 +315,17 @@ config PPC_MAPLE
bool " Maple 970FX Evaluation Board"
select U3_DART
select MPIC_BROKEN_U3
+ select GENERIC_TBSYNC
default n
help
This option enables support for the Maple 970FX Evaluation Board.
For more informations, refer to
-config PPC_BPA
- bool " Broadband Processor Architecture"
+config PPC_CELL
+ bool " Cell Broadband Processor Architecture"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_RTAS
+ select MMIO_NVRAM
config PPC_OF
bool
@@ -353,13 +356,26 @@ config RTAS_ERROR_LOGGING
depends on PPC_RTAS
default n
+config RTAS_PROC
+ bool "Proc interface to RTAS"
+ depends on PPC_RTAS
+ default y
+
+config RTAS_FLASH
+ tristate "Firmware flash interface"
+ depends on PPC64 && RTAS_PROC
+
+config MMIO_NVRAM
+ bool
+ default n
+
config MPIC_BROKEN_U3
bool
depends on PPC_MAPLE
default y
-config BPA_IIC
- depends on PPC_BPA
+config CELL_IIC
+ depends on PPC_CELL
bool
default y
@@ -372,6 +388,11 @@ config PPC_MPC106
bool
default n
+config GENERIC_TBSYNC
+ bool
+ default y if CONFIG_PPC32 && CONFIG_SMP
+ default n
+
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_PMAC
@@ -582,6 +603,16 @@ config NODES_SPAN_OTHER_NODES
def_bool y
depends on NEED_MULTIPLE_NODES
+config PPC_64K_PAGES
+ bool "64k page size"
+ depends on PPC64
+ help
+ This option changes the kernel logical page size to 64k. On machines
+ without processor support for 64k pages, the kernel will simulate
+ them by loading each individual 4k page on demand transparently,
+ while on hardware with such support, it will be used to map
+ normal application pages.
+
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
depends on PPC64 && SMP
@@ -886,8 +917,21 @@ source "arch/powerpc/platforms/iseries/Kconfig"
source "lib/Kconfig"
+menu "Instrumentation Support"
+ depends on EXPERIMENTAL
+
source "arch/powerpc/oprofile/Kconfig"
+config KPROBES
+ bool "Kprobes (EXPERIMENTAL)"
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+endmenu
+
source "arch/powerpc/Kconfig.debug"
source "security/Kconfig"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 0baf64ec80d0..30a30bf559ea 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -9,16 +9,6 @@ config DEBUG_STACKOVERFLOW
This option will cause messages to be printed if free stack space
drops below a certain limit.
-config KPROBES
- bool "Kprobes"
- depends on DEBUG_KERNEL && PPC64
- help
- Kprobes allows you to trap at almost any kernel address and
- execute a callback function. register_kprobe() establishes
- a probepoint and specifies the callback. Kprobes is useful
- for kernel debugging, non-intrusive instrumentation and testing.
- If in doubt, say "N".
-
config DEBUG_STACK_USAGE
bool "Stack utilization instrumentation"
depends on DEBUG_KERNEL && PPC64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 2f4cce06a7e5..5bc11bd36c1f 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -12,9 +12,6 @@
# Rewritten by Cort Dougan and Paul Mackerras
#
-# This must match PAGE_OFFSET in include/asm-powerpc/page.h.
-KERNELLOAD := $(CONFIG_KERNEL_START)
-
HAS_BIARCH := $(call cc-option-yn, -m32)
ifeq ($(CONFIG_PPC64),y)
@@ -59,7 +56,7 @@ override LD += -m elf$(SZ)ppc
override CC += -m$(SZ)
endif
-LDFLAGS_vmlinux := -Ttext $(KERNELLOAD) -Bstatic -e $(KERNELLOAD)
+LDFLAGS_vmlinux := -Bstatic
# The -Iarch/$(ARCH)/include is temporary while we are merging
CPPFLAGS += -Iarch/$(ARCH) -Iarch/$(ARCH)/include
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
new file mode 100644
index 000000000000..67ffecbc05cb
--- /dev/null
+++ b/arch/powerpc/configs/cell_defconfig
@@ -0,0 +1,1024 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:29:10 2005
+#
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_COMPAT=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_ISERIES is not set
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_PSERIES is not set
+CONFIG_PPC_BPA=y
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_MAPLE is not set
+CONFIG_PPC=y
+CONFIG_PPC64=y
+CONFIG_PPC_OF=y
+CONFIG_BPA_IIC=y
+CONFIG_ALTIVEC=y
+CONFIG_KEXEC=y
+# CONFIG_U3_DART is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_POWER4_ONLY is not set
+# CONFIG_IOMMU_VMERGE is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_NUMA is not set
+CONFIG_SCHED_SMT=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_PPC_RTAS=y
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=y
+CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus Options
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=y
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_AEC62XX=y
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=m
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+CONFIG_SKGE=m
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_SPIDER_NET is not set
+# CONFIG_MV643XX_ETH is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_WATCHDOG_RTAS=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUGGER=y
+# CONFIG_XMON is not set
+# CONFIG_PPCDBG is not set
+CONFIG_IRQSTACKS=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
new file mode 100644
index 000000000000..6323065fbf2c
--- /dev/null
+++ b/arch/powerpc/configs/g5_defconfig
@@ -0,0 +1,1392 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:30:23 2005
+#
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_COMPAT=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_ISERIES is not set
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_PSERIES is not set
+# CONFIG_PPC_BPA is not set
+CONFIG_PPC_PMAC=y
+# CONFIG_PPC_MAPLE is not set
+CONFIG_PPC=y
+CONFIG_PPC64=y
+CONFIG_PPC_OF=y
+CONFIG_MPIC=y
+CONFIG_ALTIVEC=y
+CONFIG_KEXEC=y
+CONFIG_U3_DART=y
+CONFIG_PPC_PMAC64=y
+CONFIG_BOOTX_TEXT=y
+CONFIG_POWER4_ONLY=y
+CONFIG_IOMMU_VMERGE=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_NUMA is not set
+# CONFIG_SCHED_SMT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus Options
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
+CONFIG_BLK_DEV_IDEDMA_PMAC=y
+# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+CONFIG_SCSI_SATA_SVW=y
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=y
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_IEEE1394=y
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+CONFIG_IEEE1394_OUI_DB=y
+CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
+CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+# CONFIG_IEEE1394_PCILYNX is not set
+CONFIG_IEEE1394_OHCI1394=y
+
+#
+# Protocol Drivers
+#
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_SBP2=m
+# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_IEEE1394_RAWIO=y
+# CONFIG_IEEE1394_CMP is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+CONFIG_ADB_PMU=y
+CONFIG_PMAC_SMU=y
+CONFIG_THERM_PM72=y
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+CONFIG_ACENIC=y
+CONFIG_ACENIC_OMIT_TIGON_I=y
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+CONFIG_TR=y
+CONFIG_IBMOL=y
+# CONFIG_3C359 is not set
+# CONFIG_TMS380TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=m
+CONFIG_AGP_UNINORTH=m
+# CONFIG_DRM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_KEYWEST=y
+CONFIG_I2C_PMAC_SMU=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_NVIDIA is not set
+CONFIG_FB_RIVA=y
+# CONFIG_FB_RIVA_I2C is not set
+# CONFIG_FB_RIVA_DEBUG is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+CONFIG_XFS_SECURITY=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_PPCDBG is not set
+CONFIG_IRQSTACKS=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
new file mode 100644
index 000000000000..62e92c7e9e27
--- /dev/null
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -0,0 +1,998 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:30:56 2005
+#
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_COMPAT=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Platform support
+#
+CONFIG_PPC_ISERIES=y
+# CONFIG_PPC_MULTIPLATFORM is not set
+CONFIG_PPC=y
+CONFIG_PPC64=y
+CONFIG_IBMVIO=y
+# CONFIG_POWER4_ONLY is not set
+CONFIG_IOMMU_VMERGE=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_NUMA is not set
+# CONFIG_SCHED_SMT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus Options
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+CONFIG_SCSI_IBMVSCSI=m
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=y
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=m
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+CONFIG_TR=y
+CONFIG_IBMOL=y
+# CONFIG_3C359 is not set
+# CONFIG_TMS380TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_ISERIES_VETH=y
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_RX=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=m
+CONFIG_SERIAL_ICOM=m
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+CONFIG_XFS_SECURITY=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# iSeries device drivers
+#
+CONFIG_VIOCONS=y
+CONFIG_VIODASD=y
+CONFIG_VIOCD=m
+CONFIG_VIOTAPE=m
+CONFIG_VIOPATH=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_KPROBES is not set
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_DEBUGGER is not set
+# CONFIG_PPCDBG is not set
+CONFIG_IRQSTACKS=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
new file mode 100644
index 000000000000..7b480f3d1406
--- /dev/null
+++ b/arch/powerpc/configs/maple_defconfig
@@ -0,0 +1,1062 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:31:24 2005
+#
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_COMPAT=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_ISERIES is not set
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_PSERIES is not set
+# CONFIG_PPC_BPA is not set
+# CONFIG_PPC_PMAC is not set
+CONFIG_PPC_MAPLE=y
+CONFIG_PPC=y
+CONFIG_PPC64=y
+CONFIG_PPC_OF=y
+CONFIG_MPIC=y
+# CONFIG_ALTIVEC is not set
+CONFIG_KEXEC=y
+CONFIG_U3_DART=y
+CONFIG_MPIC_BROKEN_U3=y
+CONFIG_BOOTX_TEXT=y
+CONFIG_POWER4_ONLY=y
+CONFIG_IOMMU_VMERGE=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_NUMA is not set
+# CONFIG_SCHED_SMT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus Options
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_IDE_TASK_IOCTL=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+CONFIG_AMD8111_ETH=y
+# CONFIG_AMD8111E_NAPI is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+CONFIG_I2C_AMD8111=y
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=y
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_TI=m
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf-8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_KPROBES is not set
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUGGER=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+# CONFIG_PPCDBG is not set
+# CONFIG_IRQSTACKS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
new file mode 100644
index 000000000000..9f09dff9e11a
--- /dev/null
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -0,0 +1,1371 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:32:17 2005
+#
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_COMPAT=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_ISERIES is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_PPC_PSERIES=y
+# CONFIG_PPC_BPA is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_MAPLE is not set
+CONFIG_PPC=y
+CONFIG_PPC64=y
+CONFIG_PPC_OF=y
+CONFIG_XICS=y
+CONFIG_MPIC=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_SPLPAR=y
+CONFIG_KEXEC=y
+CONFIG_IBMVIO=y
+# CONFIG_U3_DART is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_POWER4_ONLY is not set
+CONFIG_IOMMU_VMERGE=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=128
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
+CONFIG_NODES_SPAN_OTHER_NODES=y
+CONFIG_NUMA=y
+CONFIG_SCHED_SMT=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_EEH=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_PPC_RTAS=y
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=m
+CONFIG_SCANLOG=m
+CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus Options
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+CONFIG_HOTPLUG_PCI_RPA=m
+CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_SERIAL is not set
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=m
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+CONFIG_SCSI_IBMVSCSI=y
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_IPR=y
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+CONFIG_SCSI_QLA21XX=m
+CONFIG_SCSI_QLA22XX=m
+CONFIG_SCSI_QLA2300=m
+CONFIG_SCSI_QLA2322=m
+CONFIG_SCSI_QLA6312=m
+CONFIG_SCSI_QLA24XX=m
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=y
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBMVETH=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+CONFIG_ACENIC=y
+CONFIG_ACENIC_OMIT_TIGON_I=y
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_IXGB=m
+# CONFIG_IXGB_NAPI is not set
+CONFIG_S2IO=m
+# CONFIG_S2IO_NAPI is not set
+# CONFIG_2BUFF_MODE is not set
+
+#
+# Token Ring devices
+#
+CONFIG_TR=y
+CONFIG_IBMOL=y
+# CONFIG_3C359 is not set
+# CONFIG_TMS380TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_RX=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_ICOM=m
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_PRINTER is not set
+# CONFIG_PPDEV is not set
+# CONFIG_TIPAR is not set
+CONFIG_HVC_CONSOLE=y
+CONFIG_HVCS=m
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=1024
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+# CONFIG_FB_MATROX_I2C is not set
+CONFIG_FB_MATROX_MULTIHEAD=y
+# CONFIG_FB_RADEON_OLD is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_USS720 is not set
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_MTHCA=m
+# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+CONFIG_XFS_SECURITY=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_KPROBES is not set
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUGGER=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+# CONFIG_PPCDBG is not set
+CONFIG_IRQSTACKS=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 572d4f5eaacb..b3ae2993efb8 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -13,12 +13,15 @@ endif
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
signal_32.o pmc.o
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
- ptrace32.o systbl.o
+ signal_64.o ptrace32.o systbl.o
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o
obj-$(CONFIG_PPC_RTAS) += rtas.o
+obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
+obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_IBMVIO) += vio.o
+obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
ifeq ($(CONFIG_PPC_MERGE),y)
@@ -38,6 +41,7 @@ obj-$(CONFIG_PPC_OF) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_6xx) += idle_6xx.o
+obj-$(CONFIG_SMP) += smp.o
ifeq ($(CONFIG_PPC_ISERIES),y)
$(obj)/head_64.o: $(obj)/lparmap.s
@@ -46,8 +50,9 @@ endif
else
# stuff used from here for ARCH=ppc or ARCH=ppc64
+smpobj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o \
- setup-common.o
+ setup-common.o $(smpobj-y)
endif
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 330cd783206f..b75757251994 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -40,7 +40,7 @@
#ifdef CONFIG_PPC64
#include
#include
-#include
+#include
#include
#include
#include
@@ -125,6 +125,9 @@ int main(void)
DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
+#ifdef CONFIG_PPC_64K_PAGES
+ DEFINE(PACAPGDIR, offsetof(struct paca_struct, pgdir));
+#endif
#ifdef CONFIG_HUGETLB_PAGE
DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas));
DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas));
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index b91345fa0805..cc4e9eb1c13f 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -240,7 +240,7 @@ struct cpu_spec cpu_specs[] = {
.oprofile_model = &op_model_power4,
#endif
},
- { /* Power5 */
+ { /* Power5 GR */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003a0000,
.cpu_name = "POWER5 (gr)",
@@ -255,7 +255,7 @@ struct cpu_spec cpu_specs[] = {
.oprofile_model = &op_model_power4,
#endif
},
- { /* Power5 */
+ { /* Power5 GS */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003b0000,
.cpu_name = "POWER5 (gs)",
@@ -929,6 +929,16 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
},
+ { /* 440SPe Rev. A */
+ .pvr_mask = 0xff000fff,
+ .pvr_value = 0x53000890,
+ .cpu_name = "440SPe Rev. A",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB,
+ .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ },
#endif /* CONFIG_44x */
#ifdef CONFIG_FSL_BOOKE
{ /* e200z5 */
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 147215a0d6c0..16ab40daa738 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -35,7 +35,7 @@
#include
#include
#include
-#include
+#include
#include
#ifdef CONFIG_PPC_ISERIES
@@ -195,11 +195,11 @@ exception_marker:
#define EX_R12 24
#define EX_R13 32
#define EX_SRR0 40
-#define EX_R3 40 /* SLB miss saves R3, but not SRR0 */
#define EX_DAR 48
-#define EX_LR 48 /* SLB miss saves LR, but not DAR */
#define EX_DSISR 56
#define EX_CCR 60
+#define EX_R3 64
+#define EX_LR 72
#define EXCEPTION_PROLOG_PSERIES(area, label) \
mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
@@ -419,17 +419,22 @@ data_access_slb_pSeries:
mtspr SPRN_SPRG1,r13
RUNLATCH_ON(r13)
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r3,SPRN_DAR
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
+ mfcr r9
+#ifdef __DISABLED__
+ /* Keep that around for when we re-implement dynamic VSIDs */
+ cmpdi r3,0
+ bge slb_miss_user_pseries
+#endif /* __DISABLED__ */
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
- std r3,PACA_EXSLB+EX_R3(r13)
- mfspr r9,SPRN_SPRG1
- std r9,PACA_EXSLB+EX_R13(r13)
- mfcr r9
+ mfspr r10,SPRN_SPRG1
+ std r10,PACA_EXSLB+EX_R13(r13)
mfspr r12,SPRN_SRR1 /* and SRR1 */
- mfspr r3,SPRN_DAR
- b .do_slb_miss /* Rel. branch works in real mode */
+ b .slb_miss_realmode /* Rel. branch works in real mode */
STD_EXCEPTION_PSERIES(0x400, instruction_access)
@@ -440,17 +445,22 @@ instruction_access_slb_pSeries:
mtspr SPRN_SPRG1,r13
RUNLATCH_ON(r13)
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
+ mfcr r9
+#ifdef __DISABLED__
+ /* Keep that around for when we re-implement dynamic VSIDs */
+ cmpdi r3,0
+ bge slb_miss_user_pseries
+#endif /* __DISABLED__ */
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
- std r3,PACA_EXSLB+EX_R3(r13)
- mfspr r9,SPRN_SPRG1
- std r9,PACA_EXSLB+EX_R13(r13)
- mfcr r9
+ mfspr r10,SPRN_SPRG1
+ std r10,PACA_EXSLB+EX_R13(r13)
mfspr r12,SPRN_SRR1 /* and SRR1 */
- mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
- b .do_slb_miss /* Rel. branch works in real mode */
+ b .slb_miss_realmode /* Rel. branch works in real mode */
STD_EXCEPTION_PSERIES(0x500, hardware_interrupt)
STD_EXCEPTION_PSERIES(0x600, alignment)
@@ -508,6 +518,38 @@ _GLOBAL(do_stab_bolted_pSeries)
mfspr r12,SPRN_SPRG2
EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
+/*
+ * We have some room here we use that to put
+ * the peries slb miss user trampoline code so it's reasonably
+ * away from slb_miss_user_common to avoid problems with rfid
+ *
+ * This is used for when the SLB miss handler has to go virtual,
+ * which doesn't happen for now anymore but will once we re-implement
+ * dynamic VSIDs for shared page tables
+ */
+#ifdef __DISABLED__
+slb_miss_user_pseries:
+ std r10,PACA_EXGEN+EX_R10(r13)
+ std r11,PACA_EXGEN+EX_R11(r13)
+ std r12,PACA_EXGEN+EX_R12(r13)
+ mfspr r10,SPRG1
+ ld r11,PACA_EXSLB+EX_R9(r13)
+ ld r12,PACA_EXSLB+EX_R3(r13)
+ std r10,PACA_EXGEN+EX_R13(r13)
+ std r11,PACA_EXGEN+EX_R9(r13)
+ std r12,PACA_EXGEN+EX_R3(r13)
+ clrrdi r12,r13,32
+ mfmsr r10
+ mfspr r11,SRR0 /* save SRR0 */
+ ori r12,r12,slb_miss_user_common@l /* virt addr of handler */
+ ori r10,r10,MSR_IR|MSR_DR|MSR_RI
+ mtspr SRR0,r12
+ mfspr r12,SRR1 /* and SRR1 */
+ mtspr SRR1,r10
+ rfid
+ b . /* prevent spec. execution */
+#endif /* __DISABLED__ */
+
/*
* Vectors for the FWNMI option. Share common code.
*/
@@ -559,22 +601,59 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
.globl data_access_slb_iSeries
data_access_slb_iSeries:
mtspr SPRN_SPRG1,r13 /* save r13 */
- EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB)
+ mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
- ld r12,PACALPPACA+LPPACASRR1(r13)
mfspr r3,SPRN_DAR
- b .do_slb_miss
+ std r9,PACA_EXSLB+EX_R9(r13)
+ mfcr r9
+#ifdef __DISABLED__
+ cmpdi r3,0
+ bge slb_miss_user_iseries
+#endif
+ std r10,PACA_EXSLB+EX_R10(r13)
+ std r11,PACA_EXSLB+EX_R11(r13)
+ std r12,PACA_EXSLB+EX_R12(r13)
+ mfspr r10,SPRN_SPRG1
+ std r10,PACA_EXSLB+EX_R13(r13)
+ ld r12,PACALPPACA+LPPACASRR1(r13);
+ b .slb_miss_realmode
STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN)
.globl instruction_access_slb_iSeries
instruction_access_slb_iSeries:
mtspr SPRN_SPRG1,r13 /* save r13 */
- EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB)
+ mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
- ld r12,PACALPPACA+LPPACASRR1(r13)
- ld r3,PACALPPACA+LPPACASRR0(r13)
- b .do_slb_miss
+ ld r3,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */
+ std r9,PACA_EXSLB+EX_R9(r13)
+ mfcr r9
+#ifdef __DISABLED__
+ cmpdi r3,0
+ bge .slb_miss_user_iseries
+#endif
+ std r10,PACA_EXSLB+EX_R10(r13)
+ std r11,PACA_EXSLB+EX_R11(r13)
+ std r12,PACA_EXSLB+EX_R12(r13)
+ mfspr r10,SPRN_SPRG1
+ std r10,PACA_EXSLB+EX_R13(r13)
+ ld r12,PACALPPACA+LPPACASRR1(r13);
+ b .slb_miss_realmode
+
+#ifdef __DISABLED__
+slb_miss_user_iseries:
+ std r10,PACA_EXGEN+EX_R10(r13)
+ std r11,PACA_EXGEN+EX_R11(r13)
+ std r12,PACA_EXGEN+EX_R12(r13)
+ mfspr r10,SPRG1
+ ld r11,PACA_EXSLB+EX_R9(r13)
+ ld r12,PACA_EXSLB+EX_R3(r13)
+ std r10,PACA_EXGEN+EX_R13(r13)
+ std r11,PACA_EXGEN+EX_R9(r13)
+ std r12,PACA_EXGEN+EX_R3(r13)
+ EXCEPTION_PROLOG_ISERIES_2
+ b slb_miss_user_common
+#endif
MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt)
STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN)
@@ -809,6 +888,126 @@ instruction_access_common:
li r5,0x400
b .do_hash_page /* Try to handle as hpte fault */
+/*
+ * Here is the common SLB miss user that is used when going to virtual
+ * mode for SLB misses, that is currently not used
+ */
+#ifdef __DISABLED__
+ .align 7
+ .globl slb_miss_user_common
+slb_miss_user_common:
+ mflr r10
+ std r3,PACA_EXGEN+EX_DAR(r13)
+ stw r9,PACA_EXGEN+EX_CCR(r13)
+ std r10,PACA_EXGEN+EX_LR(r13)
+ std r11,PACA_EXGEN+EX_SRR0(r13)
+ bl .slb_allocate_user
+
+ ld r10,PACA_EXGEN+EX_LR(r13)
+ ld r3,PACA_EXGEN+EX_R3(r13)
+ lwz r9,PACA_EXGEN+EX_CCR(r13)
+ ld r11,PACA_EXGEN+EX_SRR0(r13)
+ mtlr r10
+ beq- slb_miss_fault
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- unrecov_user_slb
+ mfmsr r10
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+.machine pop
+
+ clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */
+ mtmsrd r10,1
+
+ mtspr SRR0,r11
+ mtspr SRR1,r12
+
+ ld r9,PACA_EXGEN+EX_R9(r13)
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ ld r12,PACA_EXGEN+EX_R12(r13)
+ ld r13,PACA_EXGEN+EX_R13(r13)
+ rfid
+ b .
+
+slb_miss_fault:
+ EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
+ ld r4,PACA_EXGEN+EX_DAR(r13)
+ li r5,0
+ std r4,_DAR(r1)
+ std r5,_DSISR(r1)
+ b .handle_page_fault
+
+unrecov_user_slb:
+ EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+#endif /* __DISABLED__ */
+
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+ mflr r10
+
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
+
+ bl .slb_allocate_realmode
+
+ /* All done -- return from exception. */
+
+ ld r10,PACA_EXSLB+EX_LR(r13)
+ ld r3,PACA_EXSLB+EX_R3(r13)
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+#ifdef CONFIG_PPC_ISERIES
+ ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */
+#endif /* CONFIG_PPC_ISERIES */
+
+ mtlr r10
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- unrecov_slb
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+ mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
+.machine pop
+
+#ifdef CONFIG_PPC_ISERIES
+ mtspr SPRN_SRR0,r11
+ mtspr SPRN_SRR1,r12
+#endif /* CONFIG_PPC_ISERIES */
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+unrecov_slb:
+ EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
.align 7
.globl hardware_interrupt_common
.globl hardware_interrupt_entry
@@ -1138,62 +1337,6 @@ _GLOBAL(do_stab_bolted)
rfid
b . /* prevent speculative execution */
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(do_slb_miss)
- mflr r10
-
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
-
- bl .slb_allocate /* handle it */
-
- /* All done -- return from exception. */
-
- ld r10,PACA_EXSLB+EX_LR(r13)
- ld r3,PACA_EXSLB+EX_R3(r13)
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
-#ifdef CONFIG_PPC_ISERIES
- ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */
-#endif /* CONFIG_PPC_ISERIES */
-
- mtlr r10
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- unrecov_slb
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
- mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
-.machine pop
-
-#ifdef CONFIG_PPC_ISERIES
- mtspr SPRN_SRR0,r11
- mtspr SPRN_SRR1,r12
-#endif /* CONFIG_PPC_ISERIES */
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-unrecov_slb:
- EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
/*
* Space for CPU0's segment table.
*
@@ -1569,7 +1712,10 @@ _GLOBAL(__secondary_start)
#endif
/* Initialize the first segment table (or SLB) entry */
ld r3,PACASTABVIRT(r13) /* get addr of segment table */
+BEGIN_FTR_SECTION
bl .stab_initialize
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ bl .slb_initialize
/* Initialize the kernel stack. Just a repeat for iSeries. */
LOADADDR(r3,current_set)
@@ -1914,24 +2060,6 @@ _GLOBAL(hmt_start_secondary)
blr
#endif
-#if defined(CONFIG_KEXEC) || defined(CONFIG_SMP)
-_GLOBAL(smp_release_cpus)
- /* All secondary cpus are spinning on a common
- * spinloop, release them all now so they can start
- * to spin on their individual paca spinloops.
- * For non SMP kernels, the secondary cpus never
- * get out of the common spinloop.
- * XXX This does nothing useful on iSeries, secondaries are
- * already waiting on their paca.
- */
- li r3,1
- LOADADDR(r5,__secondary_hold_spinloop)
- std r3,0(r5)
- sync
- blr
-#endif /* CONFIG_SMP */
-
-
/*
* We put a few things here that have to be page-aligned.
* This stuff goes at the beginning of the bss, which is page-aligned.
diff --git a/arch/powerpc/kernel/lparmap.c b/arch/powerpc/kernel/lparmap.c
index b81de286df5e..5a05a797485f 100644
--- a/arch/powerpc/kernel/lparmap.c
+++ b/arch/powerpc/kernel/lparmap.c
@@ -8,7 +8,7 @@
*/
#include
#include
-#include
+#include
const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
.xNumberEsids = HvEsidsToMap,
@@ -25,7 +25,7 @@ const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
.xRanges = {
{ .xPages = HvPagesToMap,
.xOffset = 0,
- .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
+ .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - HW_PAGE_SHIFT),
},
},
};
diff --git a/include/asm-ppc64/ppc32.h b/arch/powerpc/kernel/ppc32.h
similarity index 86%
rename from include/asm-ppc64/ppc32.h
rename to arch/powerpc/kernel/ppc32.h
index 3945a55d112a..90e562771791 100644
--- a/include/asm-ppc64/ppc32.h
+++ b/arch/powerpc/kernel/ppc32.h
@@ -91,6 +91,22 @@ typedef struct sigaltstack_32 {
compat_size_t ss_size;
} stack_32_t;
+struct pt_regs32 {
+ unsigned int gpr[32];
+ unsigned int nip;
+ unsigned int msr;
+ unsigned int orig_gpr3; /* Used for restarting system calls */
+ unsigned int ctr;
+ unsigned int link;
+ unsigned int xer;
+ unsigned int ccr;
+ unsigned int mq; /* 601 only (not used at present) */
+ unsigned int trap; /* Reason for being here */
+ unsigned int dar; /* Fault registers */
+ unsigned int dsisr;
+ unsigned int result; /* Result of a system call */
+};
+
struct sigcontext32 {
unsigned int _unused[4];
int signal;
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 8bc540337ba0..47d6f7e2ea9f 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -81,15 +81,6 @@ EXPORT_SYMBOL(_prep_type);
EXPORT_SYMBOL(ucSystemType);
#endif
-#if !defined(__INLINE_BITOPS)
-EXPORT_SYMBOL(set_bit);
-EXPORT_SYMBOL(clear_bit);
-EXPORT_SYMBOL(change_bit);
-EXPORT_SYMBOL(test_and_set_bit);
-EXPORT_SYMBOL(test_and_clear_bit);
-EXPORT_SYMBOL(test_and_change_bit);
-#endif /* __INLINE_BITOPS */
-
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strcat);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 8f85dabe4df3..7f64f0464d44 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -48,8 +48,8 @@
#include
#ifdef CONFIG_PPC64
#include
-#include
#include
+#include
#endif
extern unsigned long _get_SP(void);
@@ -201,27 +201,15 @@ int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs)
}
#endif /* CONFIG_SPE */
-static void set_dabr_spr(unsigned long val)
-{
- mtspr(SPRN_DABR, val);
-}
-
int set_dabr(unsigned long dabr)
{
- int ret = 0;
-
#ifdef CONFIG_PPC64
- if (firmware_has_feature(FW_FEATURE_XDABR)) {
- /* We want to catch accesses from kernel and userspace */
- unsigned long flags = H_DABRX_KERNEL|H_DABRX_USER;
- ret = plpar_set_xdabr(dabr, flags);
- } else if (firmware_has_feature(FW_FEATURE_DABR)) {
- ret = plpar_set_dabr(dabr);
- } else
+ if (ppc_md.set_dabr)
+ return ppc_md.set_dabr(dabr);
#endif
- set_dabr_spr(dabr);
- return ret;
+ mtspr(SPRN_DABR, dabr);
+ return 0;
}
#ifdef CONFIG_PPC64
@@ -566,12 +554,10 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
#ifdef CONFIG_PPC64
if (cpu_has_feature(CPU_FTR_SLB)) {
unsigned long sp_vsid = get_kernel_vsid(sp);
+ unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
sp_vsid <<= SLB_VSID_SHIFT;
- sp_vsid |= SLB_VSID_KERNEL;
- if (cpu_has_feature(CPU_FTR_16M_PAGE))
- sp_vsid |= SLB_VSID_L;
-
+ sp_vsid |= SLB_VSID_KERNEL | llp;
p->thread.ksp_vsid = sp_vsid;
}
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 2eccd0e159e3..3675ef4bac90 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -724,10 +724,10 @@ static inline char *find_flat_dt_string(u32 offset)
* used to extract the memory informations at boot before we can
* unflatten the tree
*/
-static int __init scan_flat_dt(int (*it)(unsigned long node,
- const char *uname, int depth,
- void *data),
- void *data)
+int __init of_scan_flat_dt(int (*it)(unsigned long node,
+ const char *uname, int depth,
+ void *data),
+ void *data)
{
unsigned long p = ((unsigned long)initial_boot_params) +
initial_boot_params->off_dt_struct;
@@ -784,8 +784,8 @@ static int __init scan_flat_dt(int (*it)(unsigned long node,
* This function can be used within scan_flattened_dt callback to get
* access to properties
*/
-static void* __init get_flat_dt_prop(unsigned long node, const char *name,
- unsigned long *size)
+void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
+ unsigned long *size)
{
unsigned long p = node;
@@ -1087,7 +1087,7 @@ void __init unflatten_device_tree(void)
static int __init early_init_dt_scan_cpus(unsigned long node,
const char *uname, int depth, void *data)
{
- char *type = get_flat_dt_prop(node, "device_type", NULL);
+ char *type = of_get_flat_dt_prop(node, "device_type", NULL);
u32 *prop;
unsigned long size = 0;
@@ -1095,19 +1095,6 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
if (type == NULL || strcmp(type, "cpu") != 0)
return 0;
-#ifdef CONFIG_PPC_PSERIES
- /* On LPAR, look for the first ibm,pft-size property for the hash table size
- */
- if (systemcfg->platform == PLATFORM_PSERIES_LPAR && ppc64_pft_size == 0) {
- u32 *pft_size;
- pft_size = get_flat_dt_prop(node, "ibm,pft-size", NULL);
- if (pft_size != NULL) {
- /* pft_size[0] is the NUMA CEC cookie */
- ppc64_pft_size = pft_size[1];
- }
- }
-#endif
-
boot_cpuid = 0;
boot_cpuid_phys = 0;
if (initial_boot_params && initial_boot_params->version >= 2) {
@@ -1117,8 +1104,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
boot_cpuid_phys = initial_boot_params->boot_cpuid_phys;
} else {
/* Check if it's the boot-cpu, set it's hw index now */
- if (get_flat_dt_prop(node, "linux,boot-cpu", NULL) != NULL) {
- prop = get_flat_dt_prop(node, "reg", NULL);
+ if (of_get_flat_dt_prop(node,
+ "linux,boot-cpu", NULL) != NULL) {
+ prop = of_get_flat_dt_prop(node, "reg", NULL);
if (prop != NULL)
boot_cpuid_phys = *prop;
}
@@ -1127,14 +1115,14 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
#ifdef CONFIG_ALTIVEC
/* Check if we have a VMX and eventually update CPU features */
- prop = (u32 *)get_flat_dt_prop(node, "ibm,vmx", &size);
+ prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", &size);
if (prop && (*prop) > 0) {
cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC;
cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC;
}
/* Same goes for Apple's "altivec" property */
- prop = (u32 *)get_flat_dt_prop(node, "altivec", NULL);
+ prop = (u32 *)of_get_flat_dt_prop(node, "altivec", NULL);
if (prop) {
cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC;
cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC;
@@ -1147,7 +1135,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
* this by looking at the size of the ibm,ppc-interrupt-server#s
* property
*/
- prop = (u32 *)get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s",
+ prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s",
&size);
cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
if (prop && ((size / sizeof(u32)) > 1))
@@ -1170,7 +1158,7 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
return 0;
/* get platform type */
- prop = (u32 *)get_flat_dt_prop(node, "linux,platform", NULL);
+ prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL);
if (prop == NULL)
return 0;
#ifdef CONFIG_PPC64
@@ -1183,21 +1171,21 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
#ifdef CONFIG_PPC64
/* check if iommu is forced on or off */
- if (get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
+ if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
iommu_is_off = 1;
- if (get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
+ if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
iommu_force_on = 1;
#endif
- lprop = get_flat_dt_prop(node, "linux,memory-limit", NULL);
+ lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
if (lprop)
memory_limit = *lprop;
#ifdef CONFIG_PPC64
- lprop = get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
+ lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
if (lprop)
tce_alloc_start = *lprop;
- lprop = get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
+ lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
if (lprop)
tce_alloc_end = *lprop;
#endif
@@ -1209,9 +1197,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
{
u64 *basep, *entryp;
- basep = get_flat_dt_prop(node, "linux,rtas-base", NULL);
- entryp = get_flat_dt_prop(node, "linux,rtas-entry", NULL);
- prop = get_flat_dt_prop(node, "linux,rtas-size", NULL);
+ basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL);
+ entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL);
+ prop = of_get_flat_dt_prop(node, "linux,rtas-size", NULL);
if (basep && entryp && prop) {
rtas.base = *basep;
rtas.entry = *entryp;
@@ -1232,11 +1220,11 @@ static int __init early_init_dt_scan_root(unsigned long node,
if (depth != 0)
return 0;
- prop = get_flat_dt_prop(node, "#size-cells", NULL);
+ prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
dt_root_size_cells = (prop == NULL) ? 1 : *prop;
DBG("dt_root_size_cells = %x\n", dt_root_size_cells);
- prop = get_flat_dt_prop(node, "#address-cells", NULL);
+ prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
dt_root_addr_cells = (prop == NULL) ? 2 : *prop;
DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells);
@@ -1271,7 +1259,7 @@ static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp)
static int __init early_init_dt_scan_memory(unsigned long node,
const char *uname, int depth, void *data)
{
- char *type = get_flat_dt_prop(node, "device_type", NULL);
+ char *type = of_get_flat_dt_prop(node, "device_type", NULL);
cell_t *reg, *endp;
unsigned long l;
@@ -1279,13 +1267,13 @@ static int __init early_init_dt_scan_memory(unsigned long node,
if (type == NULL || strcmp(type, "memory") != 0)
return 0;
- reg = (cell_t *)get_flat_dt_prop(node, "reg", &l);
+ reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
if (reg == NULL)
return 0;
endp = reg + (l / sizeof(cell_t));
- DBG("memory scan node %s ..., reg size %ld, data: %x %x %x %x, ...\n",
+ DBG("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
uname, l, reg[0], reg[1], reg[2], reg[3]);
while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
@@ -1343,12 +1331,12 @@ void __init early_init_devtree(void *params)
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
*/
- scan_flat_dt(early_init_dt_scan_chosen, NULL);
+ of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
/* Scan memory nodes and rebuild LMBs */
lmb_init();
- scan_flat_dt(early_init_dt_scan_root, NULL);
- scan_flat_dt(early_init_dt_scan_memory, NULL);
+ of_scan_flat_dt(early_init_dt_scan_root, NULL);
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
lmb_enforce_memory_limit(memory_limit);
lmb_analyze();
#ifdef CONFIG_PPC64
@@ -1363,10 +1351,10 @@ void __init early_init_devtree(void *params)
DBG("Scanning CPUs ...\n");
- /* Retreive hash table size from flattened tree plus other
- * CPU related informations (altivec support, boot CPU ID, ...)
+ /* Retreive CPU related informations from the flat tree
+ * (altivec support, boot CPU ID, ...)
*/
- scan_flat_dt(early_init_dt_scan_cpus, NULL);
+ of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
DBG(" <- early_init_devtree()\n");
}
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 9750b3cd8ecd..c758b6624d7b 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2000,7 +2000,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
#endif
/*
- * On pSeries and BPA, copy the CPU hold code
+ * Copy the CPU hold code
*/
if (RELOC(of_platform) != PLATFORM_POWERMAC)
copy_and_flush(0, KERNELBASE + offset, 0x100, 0);
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 568ea335d616..3d2abd95c7ae 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -248,46 +248,10 @@ void ptrace_disable(struct task_struct *child)
clear_single_step(child);
}
-long sys_ptrace(long request, long pid, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- struct task_struct *child;
int ret = -EPERM;
- lock_kernel();
- if (request == PTRACE_TRACEME) {
- /* are we already being traced? */
- if (current->ptrace & PT_PTRACED)
- goto out;
- ret = security_ptrace(current->parent, current);
- if (ret)
- goto out;
- /* set the ptrace bit in the process flags. */
- current->ptrace |= PT_PTRACED;
- ret = 0;
- goto out;
- }
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- child = find_task_by_pid(pid);
- if (child)
- get_task_struct(child);
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
-
- ret = -EPERM;
- if (pid == 1) /* you may not mess with init */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
-
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
-
switch (request) {
/* when I and D space are separate, these will need to be fixed. */
case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -540,10 +504,7 @@ long sys_ptrace(long request, long pid, long addr, long data)
ret = ptrace_request(child, request, addr, data);
break;
}
-out_tsk:
- put_task_struct(child);
-out:
- unlock_kernel();
+
return ret;
}
diff --git a/arch/ppc64/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
similarity index 100%
rename from arch/ppc64/kernel/rtas-proc.c
rename to arch/powerpc/kernel/rtas-proc.c
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 4d22eeeeb91d..b7fc2d884950 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -42,6 +42,13 @@ DEFINE_SPINLOCK(rtas_data_buf_lock);
char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned;
unsigned long rtas_rmo_buf;
+/*
+ * If non-NULL, this gets called when the kernel terminates.
+ * This is done like this so rtas_flash can be a module.
+ */
+void (*rtas_flash_term_hook)(int);
+EXPORT_SYMBOL(rtas_flash_term_hook);
+
/*
* call_rtas_display_status and call_rtas_display_status_delay
* are designed only for very early low-level debugging, which
@@ -206,6 +213,7 @@ void rtas_progress(char *s, unsigned short hex)
spin_unlock(&progress_lock);
}
+EXPORT_SYMBOL(rtas_progress); /* needed by rtas_flash module */
int rtas_token(const char *service)
{
@@ -492,6 +500,8 @@ int rtas_set_indicator(int indicator, int index, int new_value)
void rtas_restart(char *cmd)
{
+ if (rtas_flash_term_hook)
+ rtas_flash_term_hook(SYS_RESTART);
printk("RTAS system-reboot returned %d\n",
rtas_call(rtas_token("system-reboot"), 0, 1, NULL));
for (;;);
@@ -499,6 +509,8 @@ void rtas_restart(char *cmd)
void rtas_power_off(void)
{
+ if (rtas_flash_term_hook)
+ rtas_flash_term_hook(SYS_POWER_OFF);
/* allow power on only with power button press */
printk("RTAS power-off returned %d\n",
rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1));
@@ -507,7 +519,12 @@ void rtas_power_off(void)
void rtas_halt(void)
{
- rtas_power_off();
+ if (rtas_flash_term_hook)
+ rtas_flash_term_hook(SYS_HALT);
+ /* allow power on only with power button press */
+ printk("RTAS power-off returned %d\n",
+ rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1));
+ for (;;);
}
/* Must be in the RMO region, so we place it here */
diff --git a/arch/ppc64/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
similarity index 83%
rename from arch/ppc64/kernel/rtas_flash.c
rename to arch/powerpc/kernel/rtas_flash.c
index 923e2e201a70..50500093c97f 100644
--- a/arch/ppc64/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -19,6 +19,7 @@
#include
#include
#include
+#include
#define MODULE_VERS "1.0"
#define MODULE_NAME "rtas_flash"
@@ -71,10 +72,36 @@
#define VALIDATE_BUF_SIZE 4096
#define RTAS_MSG_MAXLEN 64
+struct flash_block {
+ char *data;
+ unsigned long length;
+};
+
+/* This struct is very similar but not identical to
+ * that needed by the rtas flash update.
+ * All we need to do for rtas is rewrite num_blocks
+ * into a version/length and translate the pointers
+ * to absolute.
+ */
+#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block))
+struct flash_block_list {
+ unsigned long num_blocks;
+ struct flash_block_list *next;
+ struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
+};
+struct flash_block_list_header { /* just the header of flash_block_list */
+ unsigned long num_blocks;
+ struct flash_block_list *next;
+};
+
+static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+
+#define FLASH_BLOCK_LIST_VERSION (1UL)
+
/* Local copy of the flash block list.
* We only allow one open of the flash proc file and create this
- * list as we go. This list will be put in the kernel's
- * rtas_firmware_flash_list global var once it is fully read.
+ * list as we go. This list will be put in the
+ * rtas_firmware_flash_list var once it is fully read.
*
* For convenience as we build the list we use virtual addrs,
* we do not fill in the version number, and the length field
@@ -562,6 +589,86 @@ static int validate_flash_release(struct inode *inode, struct file *file)
return 0;
}
+static void rtas_flash_firmware(int reboot_type)
+{
+ unsigned long image_size;
+ struct flash_block_list *f, *next, *flist;
+ unsigned long rtas_block_list;
+ int i, status, update_token;
+
+ if (rtas_firmware_flash_list.next == NULL)
+ return; /* nothing to do */
+
+ if (reboot_type != SYS_RESTART) {
+ printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n");
+ printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n");
+ return;
+ }
+
+ update_token = rtas_token("ibm,update-flash-64-and-reboot");
+ if (update_token == RTAS_UNKNOWN_SERVICE) {
+ printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot "
+ "is not available -- not a service partition?\n");
+ printk(KERN_ALERT "FLASH: firmware will not be flashed\n");
+ return;
+ }
+
+ /* NOTE: the "first" block list is a global var with no data
+ * blocks in the kernel data segment. We do this because
+ * we want to ensure this block_list addr is under 4GB.
+ */
+ rtas_firmware_flash_list.num_blocks = 0;
+ flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+ rtas_block_list = virt_to_abs(flist);
+ if (rtas_block_list >= 4UL*1024*1024*1024) {
+ printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+ return;
+ }
+
+ printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
+ /* Update the block_list in place. */
+ image_size = 0;
+ for (f = flist; f; f = next) {
+ /* Translate data addrs to absolute */
+ for (i = 0; i < f->num_blocks; i++) {
+ f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data);
+ image_size += f->blocks[i].length;
+ }
+ next = f->next;
+ /* Don't translate NULL pointer for last entry */
+ if (f->next)
+ f->next = (struct flash_block_list *)virt_to_abs(f->next);
+ else
+ f->next = NULL;
+ /* make num_blocks into the version/length field */
+ f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16);
+ }
+
+ printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size);
+ printk(KERN_ALERT "FLASH: performing flash and reboot\n");
+ rtas_progress("Flashing \n", 0x0);
+ rtas_progress("Please Wait... ", 0x0);
+ printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n");
+ status = rtas_call(update_token, 1, 1, NULL, rtas_block_list);
+ switch (status) { /* should only get "bad" status */
+ case 0:
+ printk(KERN_ALERT "FLASH: success\n");
+ break;
+ case -1:
+ printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n");
+ break;
+ case -3:
+ printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n");
+ break;
+ case -4:
+ printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n");
+ break;
+ default:
+ printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
+ break;
+ }
+}
+
static void remove_flash_pde(struct proc_dir_entry *dp)
{
if (dp) {
@@ -701,6 +808,7 @@ int __init rtas_flash_init(void)
if (rc != 0)
goto cleanup;
+ rtas_flash_term_hook = rtas_flash_firmware;
return 0;
cleanup:
@@ -714,6 +822,7 @@ cleanup:
void __exit rtas_flash_cleanup(void)
{
+ rtas_flash_term_hook = NULL;
remove_flash_pde(firmware_flash_pde);
remove_flash_pde(firmware_update_pde);
remove_flash_pde(validate_pde);
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 1292460fcde2..d43fa8c0e5ac 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -170,11 +170,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
}
#ifdef CONFIG_SMP
-#ifdef CONFIG_PPC64 /* XXX for now */
pvr = per_cpu(pvr, cpu_id);
-#else
- pvr = cpu_data[cpu_id].pvr;
-#endif
#else
pvr = mfspr(SPRN_PVR);
#endif
@@ -201,11 +197,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
#ifdef CONFIG_TAU_AVERAGE
/* more straightforward, but potentially misleading */
seq_printf(m, "temperature \t: %u C (uncalibrated)\n",
- cpu_temp(i));
+ cpu_temp(cpu_id));
#else
/* show the actual temp sensor range */
u32 temp;
- temp = cpu_temp_both(i);
+ temp = cpu_temp_both(cpu_id);
seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
temp & 0xff, temp >> 16);
#endif
@@ -408,3 +404,118 @@ static int __init set_preferred_console(void)
}
console_initcall(set_preferred_console);
#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+#ifdef CONFIG_SMP
+
+/**
+ * setup_cpu_maps - initialize the following cpu maps:
+ * cpu_possible_map
+ * cpu_present_map
+ * cpu_sibling_map
+ *
+ * Having the possible map set up early allows us to restrict allocations
+ * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
+ *
+ * We do not initialize the online map here; cpus set their own bits in
+ * cpu_online_map as they come up.
+ *
+ * This function is valid only for Open Firmware systems. finish_device_tree
+ * must be called before using this.
+ *
+ * While we're here, we may as well set the "physical" cpu ids in the paca.
+ */
+void __init smp_setup_cpu_maps(void)
+{
+ struct device_node *dn = NULL;
+ int cpu = 0;
+ int swap_cpuid = 0;
+
+ while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
+ int *intserv;
+ int j, len = sizeof(u32), nthreads = 1;
+
+ intserv = (int *)get_property(dn, "ibm,ppc-interrupt-server#s",
+ &len);
+ if (intserv)
+ nthreads = len / sizeof(int);
+ else {
+ intserv = (int *) get_property(dn, "reg", NULL);
+ if (!intserv)
+ intserv = &cpu; /* assume logical == phys */
+ }
+
+ for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
+ cpu_set(cpu, cpu_present_map);
+ set_hard_smp_processor_id(cpu, intserv[j]);
+
+ if (intserv[j] == boot_cpuid_phys)
+ swap_cpuid = cpu;
+ cpu_set(cpu, cpu_possible_map);
+ cpu++;
+ }
+ }
+
+ /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
+ * boot cpu is logical 0.
+ */
+ if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
+ u32 tmp;
+ tmp = get_hard_smp_processor_id(0);
+ set_hard_smp_processor_id(0, boot_cpuid_phys);
+ set_hard_smp_processor_id(swap_cpuid, tmp);
+ }
+
+#ifdef CONFIG_PPC64
+ /*
+ * On pSeries LPAR, we need to know how many cpus
+ * could possibly be added to this partition.
+ */
+ if (systemcfg->platform == PLATFORM_PSERIES_LPAR &&
+ (dn = of_find_node_by_path("/rtas"))) {
+ int num_addr_cell, num_size_cell, maxcpus;
+ unsigned int *ireg;
+
+ num_addr_cell = prom_n_addr_cells(dn);
+ num_size_cell = prom_n_size_cells(dn);
+
+ ireg = (unsigned int *)
+ get_property(dn, "ibm,lrdr-capacity", NULL);
+
+ if (!ireg)
+ goto out;
+
+ maxcpus = ireg[num_addr_cell + num_size_cell];
+
+ /* Double maxcpus for processors which have SMT capability */
+ if (cpu_has_feature(CPU_FTR_SMT))
+ maxcpus *= 2;
+
+ if (maxcpus > NR_CPUS) {
+ printk(KERN_WARNING
+ "Partition configured for %d cpus, "
+ "operating system maximum is %d.\n",
+ maxcpus, NR_CPUS);
+ maxcpus = NR_CPUS;
+ } else
+ printk(KERN_INFO "Partition configured for %d cpus.\n",
+ maxcpus);
+
+ for (cpu = 0; cpu < maxcpus; cpu++)
+ cpu_set(cpu, cpu_possible_map);
+ out:
+ of_node_put(dn);
+ }
+
+ /*
+ * Do the sibling map; assume only two threads per processor.
+ */
+ for_each_cpu(cpu) {
+ cpu_set(cpu, cpu_sibling_map[cpu]);
+ if (cpu_has_feature(CPU_FTR_SMT))
+ cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
+ }
+
+ systemcfg->processorCount = num_present_cpus();
+#endif /* CONFIG_PPC64 */
+}
+#endif /* CONFIG_SMP */
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 9680ae99b084..b45eedbb4b3a 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -288,6 +288,8 @@ void __init setup_arch(char **cmdline_p)
unflatten_device_tree();
finish_device_tree();
+ smp_setup_cpu_maps();
+
#ifdef CONFIG_BOOTX_TEXT
init_boot_display();
#endif
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 40c48100bf1b..b0994050024f 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -56,7 +56,7 @@
#include
#include
#include
-#include
+#include
#include
#include
#include
@@ -103,8 +103,6 @@ extern void htab_initialize(void);
extern void early_init_devtree(void *flat_dt);
extern void unflatten_device_tree(void);
-extern void smp_release_cpus(void);
-
int have_of = 1;
int boot_cpuid = 0;
int boot_cpuid_phys = 0;
@@ -183,120 +181,14 @@ static int __init early_smt_enabled(char *p)
}
early_param("smt-enabled", early_smt_enabled);
-/**
- * setup_cpu_maps - initialize the following cpu maps:
- * cpu_possible_map
- * cpu_present_map
- * cpu_sibling_map
- *
- * Having the possible map set up early allows us to restrict allocations
- * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
- *
- * We do not initialize the online map here; cpus set their own bits in
- * cpu_online_map as they come up.
- *
- * This function is valid only for Open Firmware systems. finish_device_tree
- * must be called before using this.
- *
- * While we're here, we may as well set the "physical" cpu ids in the paca.
- */
-static void __init setup_cpu_maps(void)
-{
- struct device_node *dn = NULL;
- int cpu = 0;
- int swap_cpuid = 0;
-
- check_smt_enabled();
-
- while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
- u32 *intserv;
- int j, len = sizeof(u32), nthreads;
-
- intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s",
- &len);
- if (!intserv)
- intserv = (u32 *)get_property(dn, "reg", NULL);
-
- nthreads = len / sizeof(u32);
-
- for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
- cpu_set(cpu, cpu_present_map);
- set_hard_smp_processor_id(cpu, intserv[j]);
-
- if (intserv[j] == boot_cpuid_phys)
- swap_cpuid = cpu;
- cpu_set(cpu, cpu_possible_map);
- cpu++;
- }
- }
-
- /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
- * boot cpu is logical 0.
- */
- if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
- u32 tmp;
- tmp = get_hard_smp_processor_id(0);
- set_hard_smp_processor_id(0, boot_cpuid_phys);
- set_hard_smp_processor_id(swap_cpuid, tmp);
- }
-
- /*
- * On pSeries LPAR, we need to know how many cpus
- * could possibly be added to this partition.
- */
- if (systemcfg->platform == PLATFORM_PSERIES_LPAR &&
- (dn = of_find_node_by_path("/rtas"))) {
- int num_addr_cell, num_size_cell, maxcpus;
- unsigned int *ireg;
-
- num_addr_cell = prom_n_addr_cells(dn);
- num_size_cell = prom_n_size_cells(dn);
-
- ireg = (unsigned int *)
- get_property(dn, "ibm,lrdr-capacity", NULL);
-
- if (!ireg)
- goto out;
-
- maxcpus = ireg[num_addr_cell + num_size_cell];
-
- /* Double maxcpus for processors which have SMT capability */
- if (cpu_has_feature(CPU_FTR_SMT))
- maxcpus *= 2;
-
- if (maxcpus > NR_CPUS) {
- printk(KERN_WARNING
- "Partition configured for %d cpus, "
- "operating system maximum is %d.\n",
- maxcpus, NR_CPUS);
- maxcpus = NR_CPUS;
- } else
- printk(KERN_INFO "Partition configured for %d cpus.\n",
- maxcpus);
-
- for (cpu = 0; cpu < maxcpus; cpu++)
- cpu_set(cpu, cpu_possible_map);
- out:
- of_node_put(dn);
- }
-
- /*
- * Do the sibling map; assume only two threads per processor.
- */
- for_each_cpu(cpu) {
- cpu_set(cpu, cpu_sibling_map[cpu]);
- if (cpu_has_feature(CPU_FTR_SMT))
- cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
- }
-
- systemcfg->processorCount = num_present_cpus();
-}
+#else
+#define check_smt_enabled()
#endif /* CONFIG_SMP */
extern struct machdep_calls pSeries_md;
extern struct machdep_calls pmac_md;
extern struct machdep_calls maple_md;
-extern struct machdep_calls bpa_md;
+extern struct machdep_calls cell_md;
extern struct machdep_calls iseries_md;
/* Ultimately, stuff them in an elf section like initcalls... */
@@ -310,8 +202,8 @@ static struct machdep_calls __initdata *machines[] = {
#ifdef CONFIG_PPC_MAPLE
&maple_md,
#endif /* CONFIG_PPC_MAPLE */
-#ifdef CONFIG_PPC_BPA
- &bpa_md,
+#ifdef CONFIG_PPC_CELL
+ &cell_md,
#endif
#ifdef CONFIG_PPC_ISERIES
&iseries_md,
@@ -384,22 +276,50 @@ void __init early_setup(unsigned long dt_ptr)
DBG("Found, Initializing memory management...\n");
- /*
- * Initialize stab / SLB management
- */
- if (!firmware_has_feature(FW_FEATURE_ISERIES))
- stab_initialize(lpaca->stab_real);
-
/*
* Initialize the MMU Hash table and create the linear mapping
- * of memory
+ * of memory. Has to be done before stab/slb initialization as
+ * this is currently where the page size encoding is obtained
*/
htab_initialize();
+ /*
+ * Initialize stab / SLB management except on iSeries
+ */
+ if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
+ if (cpu_has_feature(CPU_FTR_SLB))
+ slb_initialize();
+ else
+ stab_initialize(lpaca->stab_real);
+ }
+
DBG(" <- early_setup()\n");
}
+#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
+void smp_release_cpus(void)
+{
+ extern unsigned long __secondary_hold_spinloop;
+
+ DBG(" -> smp_release_cpus()\n");
+
+ /* All secondary cpus are spinning on a common spinloop, release them
+ * all now so they can start to spin on their individual paca
+ * spinloops. For non SMP kernels, the secondary cpus never get out
+ * of the common spinloop.
+ * This is useless but harmless on iSeries, secondaries are already
+ * waiting on their paca spinloops. */
+
+ __secondary_hold_spinloop = 1;
+ mb();
+
+ DBG(" <- smp_release_cpus()\n");
+}
+#else
+#define smp_release_cpus()
+#endif /* CONFIG_SMP || CONFIG_KEXEC */
+
/*
* Initialize some remaining members of the ppc64_caches and systemcfg structures
* (at least until we get rid of them completely). This is mostly some
@@ -589,17 +509,13 @@ void __init setup_system(void)
parse_early_param();
-#ifdef CONFIG_SMP
- /*
- * iSeries has already initialized the cpu maps at this point.
- */
- setup_cpu_maps();
+ check_smt_enabled();
+ smp_setup_cpu_maps();
/* Release secondary cpus out of their spinloops at 0x60 now that
* we can map physical -> logical CPU ids
*/
smp_release_cpus();
-#endif
printk("Starting Linux PPC64 %s\n", system_utsname.version);
@@ -631,23 +547,6 @@ static int ppc64_panic_event(struct notifier_block *this,
return NOTIFY_DONE;
}
-#ifdef CONFIG_PPC_ISERIES
-/*
- * On iSeries we just parse the mem=X option from the command line.
- * On pSeries it's a bit more complicated, see prom_init_mem()
- */
-static int __init early_parsemem(char *p)
-{
- if (!p)
- return 0;
-
- memory_limit = ALIGN(memparse(p, &p), PAGE_SIZE);
-
- return 0;
-}
-early_param("mem", early_parsemem);
-#endif /* CONFIG_PPC_ISERIES */
-
#ifdef CONFIG_IRQSTACKS
static void __init irqstack_early_init(void)
{
@@ -658,10 +557,12 @@ static void __init irqstack_early_init(void)
* SLB misses on them.
*/
for_each_cpu(i) {
- softirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE,
- THREAD_SIZE, 0x10000000));
- hardirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE,
- THREAD_SIZE, 0x10000000));
+ softirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc_base(THREAD_SIZE,
+ THREAD_SIZE, 0x10000000));
+ hardirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc_base(THREAD_SIZE,
+ THREAD_SIZE, 0x10000000));
}
}
#else
@@ -689,8 +590,8 @@ static void __init emergency_stack_init(void)
limit = min(0x10000000UL, lmb.rmo_size);
for_each_cpu(i)
- paca[i].emergency_sp = __va(lmb_alloc_base(PAGE_SIZE, 128,
- limit)) + PAGE_SIZE;
+ paca[i].emergency_sp =
+ __va(lmb_alloc_base(HW_PAGE_SIZE, 128, limit)) + HW_PAGE_SIZE;
}
/*
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 444c3e81884c..876c57c11365 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -43,7 +43,7 @@
#include
#include
#ifdef CONFIG_PPC64
-#include
+#include "ppc32.h"
#include
#include
#include
diff --git a/arch/ppc64/kernel/signal.c b/arch/powerpc/kernel/signal_64.c
similarity index 100%
rename from arch/ppc64/kernel/signal.c
rename to arch/powerpc/kernel/signal_64.c
diff --git a/arch/ppc64/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c
similarity index 52%
rename from arch/ppc64/kernel/smp-tbsync.c
rename to arch/powerpc/kernel/smp-tbsync.c
index 7d8ec9996b3e..9adef3bddad4 100644
--- a/arch/ppc64/kernel/smp-tbsync.c
+++ b/arch/powerpc/kernel/smp-tbsync.c
@@ -22,11 +22,11 @@ enum {
};
static struct {
- volatile long tb;
- volatile long mark;
+ volatile u64 tb;
+ volatile u64 mark;
volatile int cmd;
volatile int handshake;
- int filler[3];
+ int filler[2];
volatile int ack;
int filler2[7];
@@ -36,89 +36,80 @@ static struct {
static volatile int running;
-static void __devinit
-enter_contest( long mark, long add )
+static void __devinit enter_contest(u64 mark, long add)
{
- while( (long)(mftb() - mark) < 0 )
+ while (get_tb() < mark)
tbsync->race_result = add;
}
-void __devinit
-smp_generic_take_timebase( void )
+void __devinit smp_generic_take_timebase(void)
{
int cmd;
- long tb;
+ u64 tb;
local_irq_disable();
- while( !running )
- ;
+ while (!running)
+ barrier();
rmb();
- for( ;; ) {
+ for (;;) {
tbsync->ack = 1;
- while( !tbsync->handshake )
- ;
+ while (!tbsync->handshake)
+ barrier();
rmb();
cmd = tbsync->cmd;
tb = tbsync->tb;
+ mb();
tbsync->ack = 0;
- if( cmd == kExit )
- return;
+ if (cmd == kExit)
+ break;
- if( cmd == kSetAndTest ) {
- while( tbsync->handshake )
- ;
- asm volatile ("mttbl %0" :: "r" (tb & 0xfffffffful) );
- asm volatile ("mttbu %0" :: "r" (tb >> 32) );
- } else {
- while( tbsync->handshake )
- ;
- }
- enter_contest( tbsync->mark, -1 );
+ while (tbsync->handshake)
+ barrier();
+ if (cmd == kSetAndTest)
+ set_tb(tb >> 32, tb & 0xfffffffful);
+ enter_contest(tbsync->mark, -1);
}
local_irq_enable();
}
-static int __devinit
-start_contest( int cmd, long offset, long num )
+static int __devinit start_contest(int cmd, long offset, int num)
{
int i, score=0;
- long tb, mark;
+ u64 tb;
+ long mark;
tbsync->cmd = cmd;
local_irq_disable();
- for( i=-3; itb = tb + offset;
tbsync->mark = mark = tb + 400;
wmb();
tbsync->handshake = 1;
- while( tbsync->ack )
- ;
+ while (tbsync->ack)
+ barrier();
- while( (long)(mftb() - tb) <= 0 )
- ;
+ while (get_tb() <= tb)
+ barrier();
tbsync->handshake = 0;
- enter_contest( mark, 1 );
+ enter_contest(mark, 1);
- while( !tbsync->ack )
- ;
+ while (!tbsync->ack)
+ barrier();
- if ((tbsync->tb ^ (long)mftb()) & 0x8000000000000000ul)
- continue;
- if( i++ > 0 )
+ if (i++ > 0)
score += tbsync->race_result;
}
local_irq_enable();
return score;
}
-void __devinit
-smp_generic_give_timebase( void )
+void __devinit smp_generic_give_timebase(void)
{
int i, score, score2, old, min=0, max=5000, offset=1000;
@@ -130,14 +121,14 @@ smp_generic_give_timebase( void )
mb();
running = 1;
- while( !tbsync->ack )
- ;
+ while (!tbsync->ack)
+ barrier();
printk("Got ack\n");
/* binary search */
- for( old=-1 ; old != offset ; offset=(min+max)/2 ) {
- score = start_contest( kSetAndTest, offset, NUM_ITER );
+ for (old = -1; old != offset ; offset = (min+max) / 2) {
+ score = start_contest(kSetAndTest, offset, NUM_ITER);
printk("score %d, offset %d\n", score, offset );
@@ -147,21 +138,22 @@ smp_generic_give_timebase( void )
min = offset;
old = offset;
}
- score = start_contest( kSetAndTest, min, NUM_ITER );
- score2 = start_contest( kSetAndTest, max, NUM_ITER );
+ score = start_contest(kSetAndTest, min, NUM_ITER);
+ score2 = start_contest(kSetAndTest, max, NUM_ITER);
- printk( "Min %d (score %d), Max %d (score %d)\n", min, score, max, score2 );
- score = abs( score );
- score2 = abs( score2 );
+ printk("Min %d (score %d), Max %d (score %d)\n",
+ min, score, max, score2);
+ score = abs(score);
+ score2 = abs(score2);
offset = (score < score2) ? min : max;
/* guard against inaccurate mttb */
- for( i=0; i<10; i++ ) {
- start_contest( kSetAndTest, offset, NUM_ITER/10 );
+ for (i = 0; i < 10; i++) {
+ start_contest(kSetAndTest, offset, NUM_ITER/10);
- if( (score2=start_contest(kTest, offset, NUM_ITER)) < 0 )
+ if ((score2 = start_contest(kTest, offset, NUM_ITER)) < 0)
score2 = -score2;
- if( score2 <= score || score2 < 20 )
+ if (score2 <= score || score2 < 20)
break;
}
printk("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER );
@@ -170,10 +162,10 @@ smp_generic_give_timebase( void )
tbsync->cmd = kExit;
wmb();
tbsync->handshake = 1;
- while( tbsync->ack )
- ;
+ while (tbsync->ack)
+ barrier();
tbsync->handshake = 0;
- kfree( tbsync );
+ kfree(tbsync);
tbsync = NULL;
running = 0;
}
diff --git a/arch/ppc64/kernel/smp.c b/arch/powerpc/kernel/smp.c
similarity index 94%
rename from arch/ppc64/kernel/smp.c
rename to arch/powerpc/kernel/smp.c
index 017c12919832..1794a694a928 100644
--- a/arch/ppc64/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -39,13 +39,18 @@
#include
#include
#include
-#include
#include
+#include
#include
#include
#include
-#include
#include
+#ifdef CONFIG_PPC64
+#include
+#endif
+
+int smp_hw_index[NR_CPUS];
+struct thread_info *secondary_ti;
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
@@ -60,6 +65,7 @@ cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE };
EXPORT_SYMBOL(cpu_online_map);
EXPORT_SYMBOL(cpu_possible_map);
+/* SMP operations for this machine */
struct smp_ops_t *smp_ops;
static volatile unsigned int cpu_callin_map[NR_CPUS];
@@ -89,7 +95,9 @@ void __devinit smp_mpic_setup_cpu(int cpu)
{
mpic_setup_this_cpu();
}
+#endif /* CONFIG_MPIC */
+#ifdef CONFIG_PPC64
void __devinit smp_generic_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -102,8 +110,7 @@ void __devinit smp_generic_kick_cpu(int nr)
paca[nr].cpu_start = 1;
smp_mb();
}
-
-#endif /* CONFIG_MPIC */
+#endif
void smp_message_recv(int msg, struct pt_regs *regs)
{
@@ -111,15 +118,10 @@ void smp_message_recv(int msg, struct pt_regs *regs)
case PPC_MSG_CALL_FUNCTION:
smp_call_function_interrupt();
break;
- case PPC_MSG_RESCHEDULE:
+ case PPC_MSG_RESCHEDULE:
/* XXX Do we have to do this? */
set_need_resched();
break;
-#if 0
- case PPC_MSG_MIGRATE_TASK:
- /* spare */
- break;
-#endif
#ifdef CONFIG_DEBUGGER
case PPC_MSG_DEBUGGER_BREAK:
debugger_ipi(regs);
@@ -171,8 +173,8 @@ static struct call_data_struct {
int wait;
} *call_data;
-/* delay of at least 8 seconds on 1GHz cpu */
-#define SMP_CALL_TIMEOUT (1UL << (30 + 3))
+/* delay of at least 8 seconds */
+#define SMP_CALL_TIMEOUT 8
/*
* This function sends a 'generic call function' IPI to all other CPUs
@@ -194,7 +196,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
{
struct call_data_struct data;
int ret = -1, cpus;
- unsigned long timeout;
+ u64 timeout;
/* Can deadlock when called with interrupts disabled */
WARN_ON(irqs_disabled());
@@ -220,11 +222,12 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
/* Send a message to all other CPUs and wait for them to respond */
smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_CALL_FUNCTION);
+ timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec;
+
/* Wait for response */
- timeout = SMP_CALL_TIMEOUT;
while (atomic_read(&data.started) != cpus) {
HMT_low();
- if (--timeout == 0) {
+ if (get_tb() >= timeout) {
printk("smp_call_function on cpu %d: other cpus not "
"responding (%d)\n", smp_processor_id(),
atomic_read(&data.started));
@@ -234,10 +237,9 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
}
if (wait) {
- timeout = SMP_CALL_TIMEOUT;
while (atomic_read(&data.finished) != cpus) {
HMT_low();
- if (--timeout == 0) {
+ if (get_tb() >= timeout) {
printk("smp_call_function on cpu %d: other "
"cpus not finishing (%d/%d)\n",
smp_processor_id(),
@@ -251,7 +253,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
ret = 0;
-out:
+ out:
call_data = NULL;
HMT_medium();
spin_unlock(&call_lock);
@@ -313,8 +315,11 @@ static void __init smp_create_idle(unsigned int cpu)
p = fork_idle(cpu);
if (IS_ERR(p))
panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
+#ifdef CONFIG_PPC64
paca[cpu].__current = p;
+#endif
current_set[cpu] = p->thread_info;
+ p->thread_info->cpu = cpu;
}
void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -333,18 +338,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
smp_store_cpu_info(boot_cpuid);
cpu_callin_map[boot_cpuid] = 1;
-#ifndef CONFIG_PPC_ISERIES
- paca[boot_cpuid].next_jiffy_update_tb = tb_last_stamp = get_tb();
-
- /*
- * Should update do_gtod.stamp_xsec.
- * For now we leave it which means the time can be some
- * number of msecs off until someone does a settimeofday()
- */
- do_gtod.varp->tb_orig_stamp = tb_last_stamp;
- systemcfg->tb_orig_stamp = tb_last_stamp;
-#endif
-
max_cpus = smp_ops->probe();
smp_space_timers(max_cpus);
@@ -359,8 +352,9 @@ void __devinit smp_prepare_boot_cpu(void)
BUG_ON(smp_processor_id() != boot_cpuid);
cpu_set(boot_cpuid, cpu_online_map);
-
+#ifdef CONFIG_PPC64
paca[boot_cpuid].__current = current;
+#endif
current_set[boot_cpuid] = current->thread_info;
}
@@ -444,13 +438,16 @@ int __devinit __cpu_up(unsigned int cpu)
{
int c;
+ secondary_ti = current_set[cpu];
if (!cpu_enable(cpu))
return 0;
if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))
return -EINVAL;
+#ifdef CONFIG_PPC64
paca[cpu].default_decr = tb_ticks_per_jiffy;
+#endif
/* Make sure callin-map entry is 0 (can be leftover a CPU
* hotplug
@@ -513,7 +510,7 @@ int __devinit start_secondary(void *unused)
current->active_mm = &init_mm;
smp_store_cpu_info(cpu);
- set_dec(paca[cpu].default_decr);
+ set_dec(tb_ticks_per_jiffy);
cpu_callin_map[cpu] = 1;
smp_ops->setup_cpu(cpu);
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 23436b6c1881..b1c89bc4bf90 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -66,9 +66,10 @@
#include
#endif
#ifdef CONFIG_PPC_ISERIES
-#include
-#include
+#include
+#include
#endif
+#include
/* keep track of when we need to update the rtc */
time_t last_rtc_update;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 5d638ecddbd0..07e5ee40b870 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -147,8 +147,8 @@ int die(const char *str, struct pt_regs *regs, long err)
printk("POWERMAC ");
nl = 1;
break;
- case PLATFORM_BPA:
- printk("BPA ");
+ case PLATFORM_CELL:
+ printk("CELL ");
nl = 1;
break;
}
@@ -749,22 +749,22 @@ static int check_bug_trap(struct pt_regs *regs)
if (bug->line & BUG_WARNING_TRAP) {
/* this is a WARN_ON rather than BUG/BUG_ON */
#ifdef CONFIG_XMON
- xmon_printf(KERN_ERR "Badness in %s at %s:%d\n",
+ xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n",
bug->function, bug->file,
bug->line & ~BUG_WARNING_TRAP);
#endif /* CONFIG_XMON */
- printk(KERN_ERR "Badness in %s at %s:%d\n",
+ printk(KERN_ERR "Badness in %s at %s:%ld\n",
bug->function, bug->file,
bug->line & ~BUG_WARNING_TRAP);
dump_stack();
return 1;
}
#ifdef CONFIG_XMON
- xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n",
+ xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
bug->function, bug->file, bug->line);
xmon(regs);
#endif /* CONFIG_XMON */
- printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n",
+ printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
bug->function, bug->file, bug->line);
return 0;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index d4dfcfbce272..7fa7b15fd8e6 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -3,9 +3,12 @@
#include
#else
#define PAGE_SIZE 4096
+#define KERNELBASE CONFIG_KERNEL_START
#endif
#include
+ENTRY(_stext)
+
#ifdef CONFIG_PPC64
OUTPUT_ARCH(powerpc:common64)
jiffies = jiffies_64;
@@ -21,33 +24,9 @@ SECTIONS
*(.exit.data)
}
+ . = KERNELBASE;
/* Read-only sections, merged into text segment: */
-#ifdef CONFIG_PPC32
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
-/* .init : { *(.init) } =0*/
- .plt : { *(.plt) }
-#endif
.text : {
*(.text .text.*)
SCHED_TEXT
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index e6b2be3bcec1..34f5c2e074c9 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -3,13 +3,14 @@
#
ifeq ($(CONFIG_PPC_MERGE),y)
-obj-y := string.o
+obj-y := string.o strcase.o
+obj-$(CONFIG_PPC32) += div64.o copy_32.o checksum_32.o
endif
-obj-y += strcase.o
-obj-$(CONFIG_PPC32) += div64.o copy_32.o checksum_32.o
+obj-y += bitops.o
obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \
- memcpy_64.o usercopy_64.o mem_64.o
+ memcpy_64.o usercopy_64.o mem_64.o string.o \
+ strcase.o
obj-$(CONFIG_PPC_ISERIES) += e2a.o
obj-$(CONFIG_XMON) += sstep.o
diff --git a/arch/ppc64/kernel/bitops.c b/arch/powerpc/lib/bitops.c
similarity index 66%
rename from arch/ppc64/kernel/bitops.c
rename to arch/powerpc/lib/bitops.c
index ae329e8b4acb..b67ce3004ebf 100644
--- a/arch/ppc64/kernel/bitops.c
+++ b/arch/powerpc/lib/bitops.c
@@ -1,79 +1,40 @@
-/*
- * These are too big to be inlined.
- */
-
-#include
+#include
#include
-#include
#include
+#include
-unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size,
- unsigned long offset)
-{
- const unsigned long *p = addr + (offset >> 6);
- unsigned long result = offset & ~63UL;
- unsigned long tmp;
-
- if (offset >= size)
- return size;
- size -= result;
- offset &= 63UL;
- if (offset) {
- tmp = *(p++);
- tmp |= ~0UL >> (64 - offset);
- if (size < 64)
- goto found_first;
- if (~tmp)
- goto found_middle;
- size -= 64;
- result += 64;
- }
- while (size & ~63UL) {
- if (~(tmp = *(p++)))
- goto found_middle;
- result += 64;
- size -= 64;
- }
- if (!size)
- return result;
- tmp = *p;
-
-found_first:
- tmp |= ~0UL << size;
- if (tmp == ~0UL) /* Are any bits zero? */
- return result + size; /* Nope. */
-found_middle:
- return result + ffz(tmp);
-}
-
-EXPORT_SYMBOL(find_next_zero_bit);
-
+/**
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
unsigned long find_next_bit(const unsigned long *addr, unsigned long size,
unsigned long offset)
{
- const unsigned long *p = addr + (offset >> 6);
- unsigned long result = offset & ~63UL;
+ const unsigned long *p = addr + BITOP_WORD(offset);
+ unsigned long result = offset & ~(BITS_PER_LONG-1);
unsigned long tmp;
if (offset >= size)
return size;
size -= result;
- offset &= 63UL;
+ offset %= BITS_PER_LONG;
if (offset) {
tmp = *(p++);
tmp &= (~0UL << offset);
- if (size < 64)
+ if (size < BITS_PER_LONG)
goto found_first;
if (tmp)
goto found_middle;
- size -= 64;
- result += 64;
+ size -= BITS_PER_LONG;
+ result += BITS_PER_LONG;
}
- while (size & ~63UL) {
+ while (size & ~(BITS_PER_LONG-1)) {
if ((tmp = *(p++)))
goto found_middle;
- result += 64;
- size -= 64;
+ result += BITS_PER_LONG;
+ size -= BITS_PER_LONG;
}
if (!size)
return result;
@@ -86,9 +47,52 @@ found_first:
found_middle:
return result + __ffs(tmp);
}
-
EXPORT_SYMBOL(find_next_bit);
+/*
+ * This implementation of find_{first,next}_zero_bit was stolen from
+ * Linus' asm-alpha/bitops.h.
+ */
+unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size,
+ unsigned long offset)
+{
+ const unsigned long *p = addr + BITOP_WORD(offset);
+ unsigned long result = offset & ~(BITS_PER_LONG-1);
+ unsigned long tmp;
+
+ if (offset >= size)
+ return size;
+ size -= result;
+ offset %= BITS_PER_LONG;
+ if (offset) {
+ tmp = *(p++);
+ tmp |= ~0UL >> (BITS_PER_LONG - offset);
+ if (size < BITS_PER_LONG)
+ goto found_first;
+ if (~tmp)
+ goto found_middle;
+ size -= BITS_PER_LONG;
+ result += BITS_PER_LONG;
+ }
+ while (size & ~(BITS_PER_LONG-1)) {
+ if (~(tmp = *(p++)))
+ goto found_middle;
+ result += BITS_PER_LONG;
+ size -= BITS_PER_LONG;
+ }
+ if (!size)
+ return result;
+ tmp = *p;
+
+found_first:
+ tmp |= ~0UL << size;
+ if (tmp == ~0UL) /* Are any bits zero? */
+ return result + size; /* Nope. */
+found_middle:
+ return result + ffz(tmp);
+}
+EXPORT_SYMBOL(find_next_zero_bit);
+
static inline unsigned int ext2_ilog2(unsigned int x)
{
int lz;
@@ -106,8 +110,8 @@ static inline unsigned int ext2_ffz(unsigned int x)
return rc;
}
-unsigned long find_next_zero_le_bit(const unsigned long *addr, unsigned long size,
- unsigned long offset)
+unsigned long find_next_zero_le_bit(const unsigned long *addr,
+ unsigned long size, unsigned long offset)
{
const unsigned int *p = ((const unsigned int *)addr) + (offset >> 5);
unsigned int result = offset & ~31;
@@ -143,5 +147,4 @@ found_first:
found_middle:
return result + ext2_ffz(tmp);
}
-
EXPORT_SYMBOL(find_next_zero_le_bit);
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index 733d61618bbf..40523b140109 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -11,7 +11,7 @@
#include
#include
-_GLOBAL(copy_page)
+_GLOBAL(copy_4K_page)
std r31,-8(1)
std r30,-16(1)
std r29,-24(1)
diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index a0b3fbbd6fb1..6d69ef39b7df 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -24,7 +24,7 @@ _GLOBAL(__copy_tofrom_user)
std r4,-16(r1)
std r5,-8(r1)
dcbt 0,r4
- beq .Lcopy_page
+ beq .Lcopy_page_4K
andi. r6,r6,7
mtcrf 0x01,r5
blt cr1,.Lshort_copy
@@ -366,7 +366,7 @@ _GLOBAL(__copy_tofrom_user)
* above (following the .Ldst_aligned label) but it runs slightly
* slower on POWER3.
*/
-.Lcopy_page:
+.Lcopy_page_4K:
std r31,-32(1)
std r30,-40(1)
std r29,-48(1)
diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c
index 3794715b2972..2a912f411eb4 100644
--- a/arch/powerpc/lib/locks.c
+++ b/arch/powerpc/lib/locks.c
@@ -22,7 +22,7 @@
/* waiting for a spinlock... */
#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES)
#include
-#include
+#include
void __spin_yield(raw_spinlock_t *lock)
{
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index d6ed9102eeea..e0d02c4a2615 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -1,7 +1,7 @@
/*
* ppc64 MMU hashtable management routines
*
- * (c) Copyright IBM Corp. 2003
+ * (c) Copyright IBM Corp. 2003, 2005
*
* Maintained by: Benjamin Herrenschmidt
*
@@ -10,6 +10,7 @@
* described in the kernel's COPYING file.
*/
+#include
#include
#include
#include
@@ -42,14 +43,24 @@
/* Save non-volatile offsets */
#define STK_REG(i) (112 + ((i)-14)*8)
+
+#ifndef CONFIG_PPC_64K_PAGES
+
+/*****************************************************************************
+ * *
+ * 4K SW & 4K HW pages implementation *
+ * *
+ *****************************************************************************/
+
+
/*
- * _hash_page(unsigned long ea, unsigned long access, unsigned long vsid,
- * pte_t *ptep, unsigned long trap, int local)
+ * _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
+ * pte_t *ptep, unsigned long trap, int local)
*
- * Adds a page to the hash table. This is the non-LPAR version for now
+ * Adds a 4K page to the hash table in a segment of 4K pages only
*/
-_GLOBAL(__hash_page)
+_GLOBAL(__hash_page_4K)
mflr r0
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
@@ -88,7 +99,8 @@ _GLOBAL(__hash_page)
/* If so, just bail out and refault if needed. Someone else
* is changing this PTE anyway and might hash it.
*/
- bne- bail_ok
+ bne- htab_bail_ok
+
/* Prepare new PTE value (turn access RW into DIRTY, then
* add BUSY,HASHPTE and ACCESSED)
*/
@@ -118,10 +130,10 @@ _GLOBAL(__hash_page)
/* Convert linux PTE bits into HW equivalents */
andi. r3,r30,0x1fe /* Get basic set of flags */
- xori r3,r3,HW_NO_EXEC /* _PAGE_EXEC -> NOEXEC */
+ xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */
rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */
rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */
- and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY -> r0 bit 30 */
+ and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
andc r0,r30,r0 /* r0 = pte & ~r0 */
rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
@@ -158,19 +170,21 @@ htab_insert_pte:
andc r30,r30,r0
ori r30,r30,_PAGE_HASHPTE
- /* page number in r5 */
- rldicl r5,r31,64-PTE_SHIFT,PTE_SHIFT
+ /* physical address r5 */
+ rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+ sldi r5,r5,PAGE_SHIFT
/* Calculate primary group hash */
and r0,r28,r27
- rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
+ rldicr r3,r0,3,63-3 /* r3 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r7,STK_PARM(r4)(r1) /* Retreive new pp bits */
+ ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
mr r4,r29 /* Retreive va */
- li r6,0 /* no vflags */
+ li r7,0 /* !bolted, !secondary */
+ li r8,MMU_PAGE_4K /* page size */
_GLOBAL(htab_call_hpte_insert1)
- bl . /* Will be patched by htab_finish_init() */
+ bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
bge htab_pte_insert_ok /* Insertion successful */
cmpdi 0,r3,-2 /* Critical failure */
@@ -178,19 +192,21 @@ _GLOBAL(htab_call_hpte_insert1)
/* Now try secondary slot */
- /* page number in r5 */
- rldicl r5,r31,64-PTE_SHIFT,PTE_SHIFT
+ /* physical address r5 */
+ rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+ sldi r5,r5,PAGE_SHIFT
/* Calculate secondary group hash */
andc r0,r27,r28
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r7,STK_PARM(r4)(r1) /* Retreive new pp bits */
+ ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
mr r4,r29 /* Retreive va */
- li r6,HPTE_V_SECONDARY@l /* secondary slot */
+ li r7,HPTE_V_SECONDARY /* !bolted, secondary */
+ li r8,MMU_PAGE_4K /* page size */
_GLOBAL(htab_call_hpte_insert2)
- bl . /* Will be patched by htab_finish_init() */
+ bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
bge+ htab_pte_insert_ok /* Insertion successful */
cmpdi 0,r3,-2 /* Critical failure */
@@ -207,14 +223,14 @@ _GLOBAL(htab_call_hpte_insert2)
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_remove */
_GLOBAL(htab_call_hpte_remove)
- bl . /* Will be patched by htab_finish_init() */
+ bl . /* Patched by htab_finish_init() */
/* Try all again */
b htab_insert_pte
-bail_ok:
+htab_bail_ok:
li r3,0
- b bail
+ b htab_bail
htab_pte_insert_ok:
/* Insert slot number & secondary bit in PTE */
@@ -227,7 +243,7 @@ htab_write_out_pte:
ld r6,STK_PARM(r6)(r1)
std r30,0(r6)
li r3, 0
-bail:
+htab_bail:
ld r27,STK_REG(r27)(r1)
ld r28,STK_REG(r28)(r1)
ld r29,STK_REG(r29)(r1)
@@ -256,10 +272,10 @@ htab_modify_pte:
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
- li r6,0 /* large is 0 */
+ li r6,MMU_PAGE_4K /* page size */
ld r7,STK_PARM(r8)(r1) /* get "local" param */
_GLOBAL(htab_call_hpte_updatepp)
- bl . /* Will be patched by htab_finish_init() */
+ bl . /* Patched by htab_finish_init() */
/* if we failed because typically the HPTE wasn't really here
* we try an insertion.
@@ -276,13 +292,556 @@ htab_wrong_access:
/* Bail out clearing reservation */
stdcx. r31,0,r6
li r3,1
- b bail
+ b htab_bail
htab_pte_insert_failure:
/* Bail out restoring old PTE */
ld r6,STK_PARM(r6)(r1)
std r31,0(r6)
li r3,-1
- b bail
+ b htab_bail
+#else /* CONFIG_PPC_64K_PAGES */
+
+
+/*****************************************************************************
+ * *
+ * 64K SW & 4K or 64K HW in a 4K segment pages implementation *
+ * *
+ *****************************************************************************/
+
+/* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
+ * pte_t *ptep, unsigned long trap, int local)
+ */
+
+/*
+ * For now, we do NOT implement Admixed pages
+ */
+_GLOBAL(__hash_page_4K)
+ mflr r0
+ std r0,16(r1)
+ stdu r1,-STACKFRAMESIZE(r1)
+ /* Save all params that we need after a function call */
+ std r6,STK_PARM(r6)(r1)
+ std r8,STK_PARM(r8)(r1)
+
+ /* Add _PAGE_PRESENT to access */
+ ori r4,r4,_PAGE_PRESENT
+
+ /* Save non-volatile registers.
+ * r31 will hold "old PTE"
+ * r30 is "new PTE"
+ * r29 is "va"
+ * r28 is a hash value
+ * r27 is hashtab mask (maybe dynamic patched instead ?)
+ * r26 is the hidx mask
+ * r25 is the index in combo page
+ */
+ std r25,STK_REG(r25)(r1)
+ std r26,STK_REG(r26)(r1)
+ std r27,STK_REG(r27)(r1)
+ std r28,STK_REG(r28)(r1)
+ std r29,STK_REG(r29)(r1)
+ std r30,STK_REG(r30)(r1)
+ std r31,STK_REG(r31)(r1)
+
+ /* Step 1:
+ *
+ * Check permissions, atomically mark the linux PTE busy
+ * and hashed.
+ */
+1:
+ ldarx r31,0,r6
+ /* Check access rights (access & ~(pte_val(*ptep))) */
+ andc. r0,r4,r31
+ bne- htab_wrong_access
+ /* Check if PTE is busy */
+ andi. r0,r31,_PAGE_BUSY
+ /* If so, just bail out and refault if needed. Someone else
+ * is changing this PTE anyway and might hash it.
+ */
+ bne- htab_bail_ok
+ /* Prepare new PTE value (turn access RW into DIRTY, then
+ * add BUSY and ACCESSED)
+ */
+ rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */
+ or r30,r30,r31
+ ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+ /* Write the linux PTE atomically (setting busy) */
+ stdcx. r30,0,r6
+ bne- 1b
+ isync
+
+ /* Step 2:
+ *
+ * Insert/Update the HPTE in the hash table. At this point,
+ * r4 (access) is re-useable, we use it for the new HPTE flags
+ */
+
+ /* Load the hidx index */
+ rldicl r25,r3,64-12,60
+
+ /* Calc va and put it in r29 */
+ rldicr r29,r5,28,63-28 /* r29 = (vsid << 28) */
+ rldicl r3,r3,0,36 /* r3 = (ea & 0x0fffffff) */
+ or r29,r3,r29 /* r29 = va
+
+ /* Calculate hash value for primary slot and store it in r28 */
+ rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */
+ rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */
+ xor r28,r5,r0
+
+ /* Convert linux PTE bits into HW equivalents */
+ andi. r3,r30,0x1fe /* Get basic set of flags */
+ xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */
+ rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */
+ rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */
+ and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
+ andc r0,r30,r0 /* r0 = pte & ~r0 */
+ rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
+
+ /* We eventually do the icache sync here (maybe inline that
+ * code rather than call a C function...)
+ */
+BEGIN_FTR_SECTION
+ mr r4,r30
+ mr r5,r7
+ bl .hash_page_do_lazy_icache
+END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
+
+ /* At this point, r3 contains new PP bits, save them in
+ * place of "access" in the param area (sic)
+ */
+ std r3,STK_PARM(r4)(r1)
+
+ /* Get htab_hash_mask */
+ ld r4,htab_hash_mask@got(2)
+ ld r27,0(r4) /* htab_hash_mask -> r27 */
+
+ /* Check if we may already be in the hashtable, in this case, we
+ * go to out-of-line code to try to modify the HPTE. We look for
+ * the bit at (1 >> (index + 32))
+ */
+ andi. r0,r31,_PAGE_HASHPTE
+ li r26,0 /* Default hidx */
+ beq htab_insert_pte
+ ld r6,STK_PARM(r6)(r1)
+ ori r26,r6,0x8000 /* Load the hidx mask */
+ ld r26,0(r26)
+ addi r5,r25,36 /* Check actual HPTE_SUB bit, this */
+ rldcr. r0,r31,r5,0 /* must match pgtable.h definition */
+ bne htab_modify_pte
+
+htab_insert_pte:
+ /* real page number in r5, PTE RPN value + index */
+ rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+ sldi r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT
+ add r5,r5,r25
+ sldi r5,r5,HW_PAGE_SHIFT
+
+ /* Calculate primary group hash */
+ and r0,r28,r27
+ rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
+
+ /* Call ppc_md.hpte_insert */
+ ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
+ mr r4,r29 /* Retreive va */
+ li r7,0 /* !bolted, !secondary */
+ li r8,MMU_PAGE_4K /* page size */
+_GLOBAL(htab_call_hpte_insert1)
+ bl . /* patched by htab_finish_init() */
+ cmpdi 0,r3,0
+ bge htab_pte_insert_ok /* Insertion successful */
+ cmpdi 0,r3,-2 /* Critical failure */
+ beq- htab_pte_insert_failure
+
+ /* Now try secondary slot */
+
+ /* real page number in r5, PTE RPN value + index */
+ rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+ sldi r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT
+ add r5,r5,r25
+ sldi r5,r5,HW_PAGE_SHIFT
+
+ /* Calculate secondary group hash */
+ andc r0,r27,r28
+ rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
+
+ /* Call ppc_md.hpte_insert */
+ ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
+ mr r4,r29 /* Retreive va */
+ li r7,HPTE_V_SECONDARY /* !bolted, secondary */
+ li r8,MMU_PAGE_4K /* page size */
+_GLOBAL(htab_call_hpte_insert2)
+ bl . /* patched by htab_finish_init() */
+ cmpdi 0,r3,0
+ bge+ htab_pte_insert_ok /* Insertion successful */
+ cmpdi 0,r3,-2 /* Critical failure */
+ beq- htab_pte_insert_failure
+
+ /* Both are full, we need to evict something */
+ mftb r0
+ /* Pick a random group based on TB */
+ andi. r0,r0,1
+ mr r5,r28
+ bne 2f
+ not r5,r5
+2: and r0,r5,r27
+ rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
+ /* Call ppc_md.hpte_remove */
+_GLOBAL(htab_call_hpte_remove)
+ bl . /* patched by htab_finish_init() */
+
+ /* Try all again */
+ b htab_insert_pte
+
+htab_bail_ok:
+ li r3,0
+ b htab_bail
+
+htab_pte_insert_ok:
+ /* Insert slot number & secondary bit in PTE second half,
+ * clear _PAGE_BUSY and set approriate HPTE slot bit
+ */
+ ld r6,STK_PARM(r6)(r1)
+ li r0,_PAGE_BUSY
+ andc r30,r30,r0
+ /* HPTE SUB bit */
+ li r0,1
+ subfic r5,r25,27 /* Must match bit position in */
+ sld r0,r0,r5 /* pgtable.h */
+ or r30,r30,r0
+ /* hindx */
+ sldi r5,r25,2
+ sld r3,r3,r5
+ li r4,0xf
+ sld r4,r4,r5
+ andc r26,r26,r4
+ or r26,r26,r3
+ ori r5,r6,0x8000
+ std r26,0(r5)
+ lwsync
+ std r30,0(r6)
+ li r3, 0
+htab_bail:
+ ld r25,STK_REG(r25)(r1)
+ ld r26,STK_REG(r26)(r1)
+ ld r27,STK_REG(r27)(r1)
+ ld r28,STK_REG(r28)(r1)
+ ld r29,STK_REG(r29)(r1)
+ ld r30,STK_REG(r30)(r1)
+ ld r31,STK_REG(r31)(r1)
+ addi r1,r1,STACKFRAMESIZE
+ ld r0,16(r1)
+ mtlr r0
+ blr
+
+htab_modify_pte:
+ /* Keep PP bits in r4 and slot idx from the PTE around in r3 */
+ mr r4,r3
+ sldi r5,r25,2
+ srd r3,r26,r5
+
+ /* Secondary group ? if yes, get a inverted hash value */
+ mr r5,r28
+ andi. r0,r3,0x8 /* page secondary ? */
+ beq 1f
+ not r5,r5
+1: andi. r3,r3,0x7 /* extract idx alone */
+
+ /* Calculate proper slot value for ppc_md.hpte_updatepp */
+ and r0,r5,r27
+ rldicr r0,r0,3,63-3 /* r0 = (hash & mask) << 3 */
+ add r3,r0,r3 /* add slot idx */
+
+ /* Call ppc_md.hpte_updatepp */
+ mr r5,r29 /* va */
+ li r6,MMU_PAGE_4K /* page size */
+ ld r7,STK_PARM(r8)(r1) /* get "local" param */
+_GLOBAL(htab_call_hpte_updatepp)
+ bl . /* patched by htab_finish_init() */
+
+ /* if we failed because typically the HPTE wasn't really here
+ * we try an insertion.
+ */
+ cmpdi 0,r3,-1
+ beq- htab_insert_pte
+
+ /* Clear the BUSY bit and Write out the PTE */
+ li r0,_PAGE_BUSY
+ andc r30,r30,r0
+ ld r6,STK_PARM(r6)(r1)
+ std r30,0(r6)
+ li r3,0
+ b htab_bail
+
+htab_wrong_access:
+ /* Bail out clearing reservation */
+ stdcx. r31,0,r6
+ li r3,1
+ b htab_bail
+
+htab_pte_insert_failure:
+ /* Bail out restoring old PTE */
+ ld r6,STK_PARM(r6)(r1)
+ std r31,0(r6)
+ li r3,-1
+ b htab_bail
+
+
+/*****************************************************************************
+ * *
+ * 64K SW & 64K HW in a 64K segment pages implementation *
+ * *
+ *****************************************************************************/
+
+_GLOBAL(__hash_page_64K)
+ mflr r0
+ std r0,16(r1)
+ stdu r1,-STACKFRAMESIZE(r1)
+ /* Save all params that we need after a function call */
+ std r6,STK_PARM(r6)(r1)
+ std r8,STK_PARM(r8)(r1)
+
+ /* Add _PAGE_PRESENT to access */
+ ori r4,r4,_PAGE_PRESENT
+
+ /* Save non-volatile registers.
+ * r31 will hold "old PTE"
+ * r30 is "new PTE"
+ * r29 is "va"
+ * r28 is a hash value
+ * r27 is hashtab mask (maybe dynamic patched instead ?)
+ */
+ std r27,STK_REG(r27)(r1)
+ std r28,STK_REG(r28)(r1)
+ std r29,STK_REG(r29)(r1)
+ std r30,STK_REG(r30)(r1)
+ std r31,STK_REG(r31)(r1)
+
+ /* Step 1:
+ *
+ * Check permissions, atomically mark the linux PTE busy
+ * and hashed.
+ */
+1:
+ ldarx r31,0,r6
+ /* Check access rights (access & ~(pte_val(*ptep))) */
+ andc. r0,r4,r31
+ bne- ht64_wrong_access
+ /* Check if PTE is busy */
+ andi. r0,r31,_PAGE_BUSY
+ /* If so, just bail out and refault if needed. Someone else
+ * is changing this PTE anyway and might hash it.
+ */
+ bne- ht64_bail_ok
+ /* Prepare new PTE value (turn access RW into DIRTY, then
+ * add BUSY,HASHPTE and ACCESSED)
+ */
+ rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */
+ or r30,r30,r31
+ ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+ /* Write the linux PTE atomically (setting busy) */
+ stdcx. r30,0,r6
+ bne- 1b
+ isync
+
+ /* Step 2:
+ *
+ * Insert/Update the HPTE in the hash table. At this point,
+ * r4 (access) is re-useable, we use it for the new HPTE flags
+ */
+
+ /* Calc va and put it in r29 */
+ rldicr r29,r5,28,63-28
+ rldicl r3,r3,0,36
+ or r29,r3,r29
+
+ /* Calculate hash value for primary slot and store it in r28 */
+ rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */
+ rldicl r0,r3,64-16,52 /* (ea >> 16) & 0xfff */
+ xor r28,r5,r0
+
+ /* Convert linux PTE bits into HW equivalents */
+ andi. r3,r30,0x1fe /* Get basic set of flags */
+ xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */
+ rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */
+ rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */
+ and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
+ andc r0,r30,r0 /* r0 = pte & ~r0 */
+ rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */
+
+ /* We eventually do the icache sync here (maybe inline that
+ * code rather than call a C function...)
+ */
+BEGIN_FTR_SECTION
+ mr r4,r30
+ mr r5,r7
+ bl .hash_page_do_lazy_icache
+END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
+
+ /* At this point, r3 contains new PP bits, save them in
+ * place of "access" in the param area (sic)
+ */
+ std r3,STK_PARM(r4)(r1)
+
+ /* Get htab_hash_mask */
+ ld r4,htab_hash_mask@got(2)
+ ld r27,0(r4) /* htab_hash_mask -> r27 */
+
+ /* Check if we may already be in the hashtable, in this case, we
+ * go to out-of-line code to try to modify the HPTE
+ */
+ andi. r0,r31,_PAGE_HASHPTE
+ bne ht64_modify_pte
+
+ht64_insert_pte:
+ /* Clear hpte bits in new pte (we also clear BUSY btw) and
+ * add _PAGE_HASHPTE
+ */
+ lis r0,_PAGE_HPTEFLAGS@h
+ ori r0,r0,_PAGE_HPTEFLAGS@l
+ andc r30,r30,r0
+ ori r30,r30,_PAGE_HASHPTE
+
+ /* Phyical address in r5 */
+ rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+ sldi r5,r5,PAGE_SHIFT
+
+ /* Calculate primary group hash */
+ and r0,r28,r27
+ rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
+
+ /* Call ppc_md.hpte_insert */
+ ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
+ mr r4,r29 /* Retreive va */
+ li r7,0 /* !bolted, !secondary */
+ li r8,MMU_PAGE_64K
+_GLOBAL(ht64_call_hpte_insert1)
+ bl . /* patched by htab_finish_init() */
+ cmpdi 0,r3,0
+ bge ht64_pte_insert_ok /* Insertion successful */
+ cmpdi 0,r3,-2 /* Critical failure */
+ beq- ht64_pte_insert_failure
+
+ /* Now try secondary slot */
+
+ /* Phyical address in r5 */
+ rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+ sldi r5,r5,PAGE_SHIFT
+
+ /* Calculate secondary group hash */
+ andc r0,r27,r28
+ rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
+
+ /* Call ppc_md.hpte_insert */
+ ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */
+ mr r4,r29 /* Retreive va */
+ li r7,HPTE_V_SECONDARY /* !bolted, secondary */
+ li r8,MMU_PAGE_64K
+_GLOBAL(ht64_call_hpte_insert2)
+ bl . /* patched by htab_finish_init() */
+ cmpdi 0,r3,0
+ bge+ ht64_pte_insert_ok /* Insertion successful */
+ cmpdi 0,r3,-2 /* Critical failure */
+ beq- ht64_pte_insert_failure
+
+ /* Both are full, we need to evict something */
+ mftb r0
+ /* Pick a random group based on TB */
+ andi. r0,r0,1
+ mr r5,r28
+ bne 2f
+ not r5,r5
+2: and r0,r5,r27
+ rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
+ /* Call ppc_md.hpte_remove */
+_GLOBAL(ht64_call_hpte_remove)
+ bl . /* patched by htab_finish_init() */
+
+ /* Try all again */
+ b ht64_insert_pte
+
+ht64_bail_ok:
+ li r3,0
+ b ht64_bail
+
+ht64_pte_insert_ok:
+ /* Insert slot number & secondary bit in PTE */
+ rldimi r30,r3,12,63-15
+
+ /* Write out the PTE with a normal write
+ * (maybe add eieio may be good still ?)
+ */
+ht64_write_out_pte:
+ ld r6,STK_PARM(r6)(r1)
+ std r30,0(r6)
+ li r3, 0
+ht64_bail:
+ ld r27,STK_REG(r27)(r1)
+ ld r28,STK_REG(r28)(r1)
+ ld r29,STK_REG(r29)(r1)
+ ld r30,STK_REG(r30)(r1)
+ ld r31,STK_REG(r31)(r1)
+ addi r1,r1,STACKFRAMESIZE
+ ld r0,16(r1)
+ mtlr r0
+ blr
+
+ht64_modify_pte:
+ /* Keep PP bits in r4 and slot idx from the PTE around in r3 */
+ mr r4,r3
+ rlwinm r3,r31,32-12,29,31
+
+ /* Secondary group ? if yes, get a inverted hash value */
+ mr r5,r28
+ andi. r0,r31,_PAGE_F_SECOND
+ beq 1f
+ not r5,r5
+1:
+ /* Calculate proper slot value for ppc_md.hpte_updatepp */
+ and r0,r5,r27
+ rldicr r0,r0,3,63-3 /* r0 = (hash & mask) << 3 */
+ add r3,r0,r3 /* add slot idx */
+
+ /* Call ppc_md.hpte_updatepp */
+ mr r5,r29 /* va */
+ li r6,MMU_PAGE_64K
+ ld r7,STK_PARM(r8)(r1) /* get "local" param */
+_GLOBAL(ht64_call_hpte_updatepp)
+ bl . /* patched by htab_finish_init() */
+
+ /* if we failed because typically the HPTE wasn't really here
+ * we try an insertion.
+ */
+ cmpdi 0,r3,-1
+ beq- ht64_insert_pte
+
+ /* Clear the BUSY bit and Write out the PTE */
+ li r0,_PAGE_BUSY
+ andc r30,r30,r0
+ b ht64_write_out_pte
+
+ht64_wrong_access:
+ /* Bail out clearing reservation */
+ stdcx. r31,0,r6
+ li r3,1
+ b ht64_bail
+
+ht64_pte_insert_failure:
+ /* Bail out restoring old PTE */
+ ld r6,STK_PARM(r6)(r1)
+ std r31,0(r6)
+ li r3,-1
+ b ht64_bail
+
+
+#endif /* CONFIG_PPC_64K_PAGES */
+
+
+/*****************************************************************************
+ * *
+ * Huge pages implementation is in hugetlbpage.c *
+ * *
+ *****************************************************************************/
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 174d14576c28..d96bcfe4c6f6 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -9,6 +9,9 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+
+#undef DEBUG_LOW
+
#include
#include
#include
@@ -22,11 +25,84 @@
#include
#include
#include
+#include
+
+#ifdef DEBUG_LOW
+#define DBG_LOW(fmt...) udbg_printf(fmt)
+#else
+#define DBG_LOW(fmt...)
+#endif
#define HPTE_LOCK_BIT 3
static DEFINE_SPINLOCK(native_tlbie_lock);
+static inline void __tlbie(unsigned long va, unsigned int psize)
+{
+ unsigned int penc;
+
+ /* clear top 16 bits, non SLS segment */
+ va &= ~(0xffffULL << 48);
+
+ switch (psize) {
+ case MMU_PAGE_4K:
+ va &= ~0xffful;
+ asm volatile("tlbie %0,0" : : "r" (va) : "memory");
+ break;
+ default:
+ penc = mmu_psize_defs[psize].penc;
+ va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
+ va |= (0x7f >> (8 - penc)) << 12;
+ asm volatile("tlbie %0,1" : : "r" (va) : "memory");
+ break;
+ }
+}
+
+static inline void __tlbiel(unsigned long va, unsigned int psize)
+{
+ unsigned int penc;
+
+ /* clear top 16 bits, non SLS segment */
+ va &= ~(0xffffULL << 48);
+
+ switch (psize) {
+ case MMU_PAGE_4K:
+ va &= ~0xffful;
+ asm volatile(".long 0x7c000224 | (%0 << 11) | (0 << 21)"
+ : : "r"(va) : "memory");
+ break;
+ default:
+ penc = mmu_psize_defs[psize].penc;
+ va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
+ va |= (0x7f >> (8 - penc)) << 12;
+ asm volatile(".long 0x7c000224 | (%0 << 11) | (1 << 21)"
+ : : "r"(va) : "memory");
+ break;
+ }
+
+}
+
+static inline void tlbie(unsigned long va, int psize, int local)
+{
+ unsigned int use_local = local && cpu_has_feature(CPU_FTR_TLBIEL);
+ int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
+
+ if (use_local)
+ use_local = mmu_psize_defs[psize].tlbiel;
+ if (lock_tlbie && !use_local)
+ spin_lock(&native_tlbie_lock);
+ asm volatile("ptesync": : :"memory");
+ if (use_local) {
+ __tlbiel(va, psize);
+ asm volatile("ptesync": : :"memory");
+ } else {
+ __tlbie(va, psize);
+ asm volatile("eieio; tlbsync; ptesync": : :"memory");
+ }
+ if (lock_tlbie && !use_local)
+ spin_unlock(&native_tlbie_lock);
+}
+
static inline void native_lock_hpte(hpte_t *hptep)
{
unsigned long *word = &hptep->v;
@@ -48,13 +124,19 @@ static inline void native_unlock_hpte(hpte_t *hptep)
}
long native_hpte_insert(unsigned long hpte_group, unsigned long va,
- unsigned long prpn, unsigned long vflags,
- unsigned long rflags)
+ unsigned long pa, unsigned long rflags,
+ unsigned long vflags, int psize)
{
hpte_t *hptep = htab_address + hpte_group;
unsigned long hpte_v, hpte_r;
int i;
+ if (!(vflags & HPTE_V_BOLTED)) {
+ DBG_LOW(" insert(group=%lx, va=%016lx, pa=%016lx,"
+ " rflags=%lx, vflags=%lx, psize=%d)\n",
+ hpte_group, va, pa, rflags, vflags, psize);
+ }
+
for (i = 0; i < HPTES_PER_GROUP; i++) {
if (! (hptep->v & HPTE_V_VALID)) {
/* retry with lock held */
@@ -70,10 +152,13 @@ long native_hpte_insert(unsigned long hpte_group, unsigned long va,
if (i == HPTES_PER_GROUP)
return -1;
- hpte_v = (va >> 23) << HPTE_V_AVPN_SHIFT | vflags | HPTE_V_VALID;
- if (vflags & HPTE_V_LARGE)
- va &= ~(1UL << HPTE_V_AVPN_SHIFT);
- hpte_r = (prpn << HPTE_R_RPN_SHIFT) | rflags;
+ hpte_v = hpte_encode_v(va, psize) | vflags | HPTE_V_VALID;
+ hpte_r = hpte_encode_r(pa, psize) | rflags;
+
+ if (!(vflags & HPTE_V_BOLTED)) {
+ DBG_LOW(" i=%x hpte_v=%016lx, hpte_r=%016lx\n",
+ i, hpte_v, hpte_r);
+ }
hptep->r = hpte_r;
/* Guarantee the second dword is visible before the valid bit */
@@ -96,6 +181,8 @@ static long native_hpte_remove(unsigned long hpte_group)
int slot_offset;
unsigned long hpte_v;
+ DBG_LOW(" remove(group=%lx)\n", hpte_group);
+
/* pick a random entry to start at */
slot_offset = mftb() & 0x7;
@@ -126,34 +213,51 @@ static long native_hpte_remove(unsigned long hpte_group)
return i;
}
-static inline void set_pp_bit(unsigned long pp, hpte_t *addr)
+static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
+ unsigned long va, int psize, int local)
{
- unsigned long old;
- unsigned long *p = &addr->r;
+ hpte_t *hptep = htab_address + slot;
+ unsigned long hpte_v, want_v;
+ int ret = 0;
- __asm__ __volatile__(
- "1: ldarx %0,0,%3\n\
- rldimi %0,%2,0,61\n\
- stdcx. %0,0,%3\n\
- bne 1b"
- : "=&r" (old), "=m" (*p)
- : "r" (pp), "r" (p), "m" (*p)
- : "cc");
+ want_v = hpte_encode_v(va, psize);
+
+ DBG_LOW(" update(va=%016lx, avpnv=%016lx, hash=%016lx, newpp=%x)",
+ va, want_v & HPTE_V_AVPN, slot, newpp);
+
+ native_lock_hpte(hptep);
+
+ hpte_v = hptep->v;
+
+ /* Even if we miss, we need to invalidate the TLB */
+ if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
+ DBG_LOW(" -> miss\n");
+ native_unlock_hpte(hptep);
+ ret = -1;
+ } else {
+ DBG_LOW(" -> hit\n");
+ /* Update the HPTE */
+ hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) |
+ (newpp & (HPTE_R_PP | HPTE_R_N));
+ native_unlock_hpte(hptep);
+ }
+
+ /* Ensure it is out of the tlb too. */
+ tlbie(va, psize, local);
+
+ return ret;
}
-/*
- * Only works on small pages. Yes its ugly to have to check each slot in
- * the group but we only use this during bootup.
- */
-static long native_hpte_find(unsigned long vpn)
+static long native_hpte_find(unsigned long va, int psize)
{
hpte_t *hptep;
unsigned long hash;
unsigned long i, j;
long slot;
- unsigned long hpte_v;
+ unsigned long want_v, hpte_v;
- hash = hpt_hash(vpn, 0);
+ hash = hpt_hash(va, mmu_psize_defs[psize].shift);
+ want_v = hpte_encode_v(va, psize);
for (j = 0; j < 2; j++) {
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
@@ -161,7 +265,7 @@ static long native_hpte_find(unsigned long vpn)
hptep = htab_address + slot;
hpte_v = hptep->v;
- if ((HPTE_V_AVPN_VAL(hpte_v) == (vpn >> 11))
+ if (HPTE_V_COMPARE(hpte_v, want_v)
&& (hpte_v & HPTE_V_VALID)
&& ( !!(hpte_v & HPTE_V_SECONDARY) == j)) {
/* HPTE matches */
@@ -177,118 +281,90 @@ static long native_hpte_find(unsigned long vpn)
return -1;
}
-static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
- unsigned long va, int large, int local)
-{
- hpte_t *hptep = htab_address + slot;
- unsigned long hpte_v;
- unsigned long avpn = va >> 23;
- int ret = 0;
-
- if (large)
- avpn &= ~1;
-
- native_lock_hpte(hptep);
-
- hpte_v = hptep->v;
-
- /* Even if we miss, we need to invalidate the TLB */
- if ((HPTE_V_AVPN_VAL(hpte_v) != avpn)
- || !(hpte_v & HPTE_V_VALID)) {
- native_unlock_hpte(hptep);
- ret = -1;
- } else {
- set_pp_bit(newpp, hptep);
- native_unlock_hpte(hptep);
- }
-
- /* Ensure it is out of the tlb too */
- if (cpu_has_feature(CPU_FTR_TLBIEL) && !large && local) {
- tlbiel(va);
- } else {
- int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
-
- if (lock_tlbie)
- spin_lock(&native_tlbie_lock);
- tlbie(va, large);
- if (lock_tlbie)
- spin_unlock(&native_tlbie_lock);
- }
-
- return ret;
-}
-
/*
* Update the page protection bits. Intended to be used to create
* guard pages for kernel data structures on pages which are bolted
* in the HPT. Assumes pages being operated on will not be stolen.
- * Does not work on large pages.
*
* No need to lock here because we should be the only user.
*/
-static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea)
+static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
+ int psize)
{
- unsigned long vsid, va, vpn, flags = 0;
+ unsigned long vsid, va;
long slot;
hpte_t *hptep;
- int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
vsid = get_kernel_vsid(ea);
va = (vsid << 28) | (ea & 0x0fffffff);
- vpn = va >> PAGE_SHIFT;
- slot = native_hpte_find(vpn);
+ slot = native_hpte_find(va, psize);
if (slot == -1)
panic("could not find page to bolt\n");
hptep = htab_address + slot;
- set_pp_bit(newpp, hptep);
+ /* Update the HPTE */
+ hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) |
+ (newpp & (HPTE_R_PP | HPTE_R_N));
- /* Ensure it is out of the tlb too */
- if (lock_tlbie)
- spin_lock_irqsave(&native_tlbie_lock, flags);
- tlbie(va, 0);
- if (lock_tlbie)
- spin_unlock_irqrestore(&native_tlbie_lock, flags);
+ /* Ensure it is out of the tlb too. */
+ tlbie(va, psize, 0);
}
static void native_hpte_invalidate(unsigned long slot, unsigned long va,
- int large, int local)
+ int psize, int local)
{
hpte_t *hptep = htab_address + slot;
unsigned long hpte_v;
- unsigned long avpn = va >> 23;
+ unsigned long want_v;
unsigned long flags;
- int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
-
- if (large)
- avpn &= ~1;
local_irq_save(flags);
- native_lock_hpte(hptep);
+ DBG_LOW(" invalidate(va=%016lx, hash: %x)\n", va, slot);
+
+ want_v = hpte_encode_v(va, psize);
+ native_lock_hpte(hptep);
hpte_v = hptep->v;
/* Even if we miss, we need to invalidate the TLB */
- if ((HPTE_V_AVPN_VAL(hpte_v) != avpn)
- || !(hpte_v & HPTE_V_VALID)) {
+ if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID))
native_unlock_hpte(hptep);
- } else {
+ else
/* Invalidate the hpte. NOTE: this also unlocks it */
hptep->v = 0;
+
+ /* Invalidate the TLB */
+ tlbie(va, psize, local);
+
+ local_irq_restore(flags);
+}
+
+/*
+ * XXX This need fixing based on page size. It's only used by
+ * native_hpte_clear() for now which needs fixing too so they
+ * make a good pair...
+ */
+static unsigned long slot2va(unsigned long hpte_v, unsigned long slot)
+{
+ unsigned long avpn = HPTE_V_AVPN_VAL(hpte_v);
+ unsigned long va;
+
+ va = avpn << 23;
+
+ if (! (hpte_v & HPTE_V_LARGE)) {
+ unsigned long vpi, pteg;
+
+ pteg = slot / HPTES_PER_GROUP;
+ if (hpte_v & HPTE_V_SECONDARY)
+ pteg = ~pteg;
+
+ vpi = ((va >> 28) ^ pteg) & htab_hash_mask;
+
+ va |= vpi << PAGE_SHIFT;
}
- /* Invalidate the tlb */
- if (cpu_has_feature(CPU_FTR_TLBIEL) && !large && local) {
- tlbiel(va);
- } else {
- if (lock_tlbie)
- spin_lock(&native_tlbie_lock);
- tlbie(va, large);
- if (lock_tlbie)
- spin_unlock(&native_tlbie_lock);
- }
- local_irq_restore(flags);
+ return va;
}
/*
@@ -298,6 +374,8 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long va,
*
* TODO: add batching support when enabled. remember, no dynamic memory here,
* athough there is the control page available...
+ *
+ * XXX FIXME: 4k only for now !
*/
static void native_hpte_clear(void)
{
@@ -327,7 +405,7 @@ static void native_hpte_clear(void)
if (hpte_v & HPTE_V_VALID) {
hptep->v = 0;
- tlbie(slot2va(hpte_v, slot), hpte_v & HPTE_V_LARGE);
+ tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K, 0);
}
}
@@ -335,59 +413,59 @@ static void native_hpte_clear(void)
local_irq_restore(flags);
}
+/*
+ * Batched hash table flush, we batch the tlbie's to avoid taking/releasing
+ * the lock all the time
+ */
static void native_flush_hash_range(unsigned long number, int local)
{
- unsigned long va, vpn, hash, secondary, slot, flags, avpn;
- int i, j;
+ unsigned long va, hash, index, hidx, shift, slot;
hpte_t *hptep;
unsigned long hpte_v;
+ unsigned long want_v;
+ unsigned long flags;
+ real_pte_t pte;
struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
- unsigned long large = batch->large;
+ unsigned long psize = batch->psize;
+ int i;
local_irq_save(flags);
- j = 0;
for (i = 0; i < number; i++) {
- va = batch->vaddr[j];
- if (large)
- vpn = va >> HPAGE_SHIFT;
- else
- vpn = va >> PAGE_SHIFT;
- hash = hpt_hash(vpn, large);
- secondary = (pte_val(batch->pte[i]) & _PAGE_SECONDARY) >> 15;
- if (secondary)
- hash = ~hash;
- slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
- slot += (pte_val(batch->pte[i]) & _PAGE_GROUP_IX) >> 12;
+ va = batch->vaddr[i];
+ pte = batch->pte[i];
- hptep = htab_address + slot;
-
- avpn = va >> 23;
- if (large)
- avpn &= ~0x1UL;
-
- native_lock_hpte(hptep);
-
- hpte_v = hptep->v;
-
- /* Even if we miss, we need to invalidate the TLB */
- if ((HPTE_V_AVPN_VAL(hpte_v) != avpn)
- || !(hpte_v & HPTE_V_VALID)) {
- native_unlock_hpte(hptep);
- } else {
- /* Invalidate the hpte. NOTE: this also unlocks it */
- hptep->v = 0;
- }
-
- j++;
+ pte_iterate_hashed_subpages(pte, psize, va, index, shift) {
+ hash = hpt_hash(va, shift);
+ hidx = __rpte_to_hidx(pte, index);
+ if (hidx & _PTEIDX_SECONDARY)
+ hash = ~hash;
+ slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+ slot += hidx & _PTEIDX_GROUP_IX;
+ hptep = htab_address + slot;
+ want_v = hpte_encode_v(va, psize);
+ native_lock_hpte(hptep);
+ hpte_v = hptep->v;
+ if (!HPTE_V_COMPARE(hpte_v, want_v) ||
+ !(hpte_v & HPTE_V_VALID))
+ native_unlock_hpte(hptep);
+ else
+ hptep->v = 0;
+ } pte_iterate_hashed_end();
}
- if (cpu_has_feature(CPU_FTR_TLBIEL) && !large && local) {
+ if (cpu_has_feature(CPU_FTR_TLBIEL) &&
+ mmu_psize_defs[psize].tlbiel && local) {
asm volatile("ptesync":::"memory");
+ for (i = 0; i < number; i++) {
+ va = batch->vaddr[i];
+ pte = batch->pte[i];
- for (i = 0; i < j; i++)
- __tlbiel(batch->vaddr[i]);
-
+ pte_iterate_hashed_subpages(pte, psize, va, index,
+ shift) {
+ __tlbiel(va, psize);
+ } pte_iterate_hashed_end();
+ }
asm volatile("ptesync":::"memory");
} else {
int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
@@ -396,10 +474,15 @@ static void native_flush_hash_range(unsigned long number, int local)
spin_lock(&native_tlbie_lock);
asm volatile("ptesync":::"memory");
+ for (i = 0; i < number; i++) {
+ va = batch->vaddr[i];
+ pte = batch->pte[i];
- for (i = 0; i < j; i++)
- __tlbie(batch->vaddr[i], large);
-
+ pte_iterate_hashed_subpages(pte, psize, va, index,
+ shift) {
+ __tlbie(va, psize);
+ } pte_iterate_hashed_end();
+ }
asm volatile("eieio; tlbsync; ptesync":::"memory");
if (lock_tlbie)
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 6e9e05cce02c..f15dfb92dec0 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -19,6 +19,7 @@
*/
#undef DEBUG
+#undef DEBUG_LOW
#include
#include
@@ -59,6 +60,15 @@
#define DBG(fmt...)
#endif
+#ifdef DEBUG_LOW
+#define DBG_LOW(fmt...) udbg_printf(fmt)
+#else
+#define DBG_LOW(fmt...)
+#endif
+
+#define KB (1024)
+#define MB (1024*KB)
+
/*
* Note: pte --> Linux PTE
* HPTE --> PowerPC Hashed Page Table Entry
@@ -77,91 +87,292 @@ extern unsigned long dart_tablebase;
hpte_t *htab_address;
unsigned long htab_hash_mask;
-
unsigned long _SDR1;
+struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
+int mmu_linear_psize = MMU_PAGE_4K;
+int mmu_virtual_psize = MMU_PAGE_4K;
+#ifdef CONFIG_HUGETLB_PAGE
+int mmu_huge_psize = MMU_PAGE_16M;
+unsigned int HPAGE_SHIFT;
+#endif
-#define KB (1024)
-#define MB (1024*KB)
+/* There are definitions of page sizes arrays to be used when none
+ * is provided by the firmware.
+ */
-static inline void loop_forever(void)
+/* Pre-POWER4 CPUs (4k pages only)
+ */
+struct mmu_psize_def mmu_psize_defaults_old[] = {
+ [MMU_PAGE_4K] = {
+ .shift = 12,
+ .sllp = 0,
+ .penc = 0,
+ .avpnm = 0,
+ .tlbiel = 0,
+ },
+};
+
+/* POWER4, GPUL, POWER5
+ *
+ * Support for 16Mb large pages
+ */
+struct mmu_psize_def mmu_psize_defaults_gp[] = {
+ [MMU_PAGE_4K] = {
+ .shift = 12,
+ .sllp = 0,
+ .penc = 0,
+ .avpnm = 0,
+ .tlbiel = 1,
+ },
+ [MMU_PAGE_16M] = {
+ .shift = 24,
+ .sllp = SLB_VSID_L,
+ .penc = 0,
+ .avpnm = 0x1UL,
+ .tlbiel = 0,
+ },
+};
+
+
+int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
+ unsigned long pstart, unsigned long mode, int psize)
{
- volatile unsigned long x = 1;
- for(;x;x|=1)
- ;
-}
-
-static inline void create_pte_mapping(unsigned long start, unsigned long end,
- unsigned long mode, int large)
-{
- unsigned long addr;
- unsigned int step;
+ unsigned long vaddr, paddr;
+ unsigned int step, shift;
unsigned long tmp_mode;
- unsigned long vflags;
+ int ret = 0;
- if (large) {
- step = 16*MB;
- vflags = HPTE_V_BOLTED | HPTE_V_LARGE;
- } else {
- step = 4*KB;
- vflags = HPTE_V_BOLTED;
- }
+ shift = mmu_psize_defs[psize].shift;
+ step = 1 << shift;
- for (addr = start; addr < end; addr += step) {
+ for (vaddr = vstart, paddr = pstart; vaddr < vend;
+ vaddr += step, paddr += step) {
unsigned long vpn, hash, hpteg;
- unsigned long vsid = get_kernel_vsid(addr);
- unsigned long va = (vsid << 28) | (addr & 0xfffffff);
- int ret = -1;
-
- if (large)
- vpn = va >> HPAGE_SHIFT;
- else
- vpn = va >> PAGE_SHIFT;
-
+ unsigned long vsid = get_kernel_vsid(vaddr);
+ unsigned long va = (vsid << 28) | (vaddr & 0x0fffffff);
+ vpn = va >> shift;
tmp_mode = mode;
/* Make non-kernel text non-executable */
- if (!in_kernel_text(addr))
- tmp_mode = mode | HW_NO_EXEC;
-
- hash = hpt_hash(vpn, large);
+ if (!in_kernel_text(vaddr))
+ tmp_mode = mode | HPTE_R_N;
+ hash = hpt_hash(va, shift);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+ /* The crap below can be cleaned once ppd_md.probe() can
+ * set up the hash callbacks, thus we can just used the
+ * normal insert callback here.
+ */
#ifdef CONFIG_PPC_ISERIES
- if (systemcfg->platform & PLATFORM_ISERIES_LPAR)
- ret = iSeries_hpte_bolt_or_insert(hpteg, va,
- virt_to_abs(addr) >> PAGE_SHIFT,
- vflags, tmp_mode);
+ if (systemcfg->platform == PLATFORM_ISERIES_LPAR)
+ ret = iSeries_hpte_insert(hpteg, va,
+ virt_to_abs(paddr),
+ tmp_mode,
+ HPTE_V_BOLTED,
+ psize);
else
#endif
#ifdef CONFIG_PPC_PSERIES
if (systemcfg->platform & PLATFORM_LPAR)
ret = pSeries_lpar_hpte_insert(hpteg, va,
- virt_to_abs(addr) >> PAGE_SHIFT,
- vflags, tmp_mode);
+ virt_to_abs(paddr),
+ tmp_mode,
+ HPTE_V_BOLTED,
+ psize);
else
#endif
#ifdef CONFIG_PPC_MULTIPLATFORM
ret = native_hpte_insert(hpteg, va,
- virt_to_abs(addr) >> PAGE_SHIFT,
- vflags, tmp_mode);
+ virt_to_abs(paddr),
+ tmp_mode, HPTE_V_BOLTED,
+ psize);
#endif
-
- if (ret == -1) {
- ppc64_terminate_msg(0x20, "create_pte_mapping");
- loop_forever();
- }
+ if (ret < 0)
+ break;
}
+ return ret < 0 ? ret : 0;
}
-static unsigned long get_hashtable_size(void)
+static int __init htab_dt_scan_page_sizes(unsigned long node,
+ const char *uname, int depth,
+ void *data)
+{
+ char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ u32 *prop;
+ unsigned long size = 0;
+
+ /* We are scanning "cpu" nodes only */
+ if (type == NULL || strcmp(type, "cpu") != 0)
+ return 0;
+
+ prop = (u32 *)of_get_flat_dt_prop(node,
+ "ibm,segment-page-sizes", &size);
+ if (prop != NULL) {
+ DBG("Page sizes from device-tree:\n");
+ size /= 4;
+ cur_cpu_spec->cpu_features &= ~(CPU_FTR_16M_PAGE);
+ while(size > 0) {
+ unsigned int shift = prop[0];
+ unsigned int slbenc = prop[1];
+ unsigned int lpnum = prop[2];
+ unsigned int lpenc = 0;
+ struct mmu_psize_def *def;
+ int idx = -1;
+
+ size -= 3; prop += 3;
+ while(size > 0 && lpnum) {
+ if (prop[0] == shift)
+ lpenc = prop[1];
+ prop += 2; size -= 2;
+ lpnum--;
+ }
+ switch(shift) {
+ case 0xc:
+ idx = MMU_PAGE_4K;
+ break;
+ case 0x10:
+ idx = MMU_PAGE_64K;
+ break;
+ case 0x14:
+ idx = MMU_PAGE_1M;
+ break;
+ case 0x18:
+ idx = MMU_PAGE_16M;
+ cur_cpu_spec->cpu_features |= CPU_FTR_16M_PAGE;
+ break;
+ case 0x22:
+ idx = MMU_PAGE_16G;
+ break;
+ }
+ if (idx < 0)
+ continue;
+ def = &mmu_psize_defs[idx];
+ def->shift = shift;
+ if (shift <= 23)
+ def->avpnm = 0;
+ else
+ def->avpnm = (1 << (shift - 23)) - 1;
+ def->sllp = slbenc;
+ def->penc = lpenc;
+ /* We don't know for sure what's up with tlbiel, so
+ * for now we only set it for 4K and 64K pages
+ */
+ if (idx == MMU_PAGE_4K || idx == MMU_PAGE_64K)
+ def->tlbiel = 1;
+ else
+ def->tlbiel = 0;
+
+ DBG(" %d: shift=%02x, sllp=%04x, avpnm=%08x, "
+ "tlbiel=%d, penc=%d\n",
+ idx, shift, def->sllp, def->avpnm, def->tlbiel,
+ def->penc);
+ }
+ return 1;
+ }
+ return 0;
+}
+
+
+static void __init htab_init_page_sizes(void)
+{
+ int rc;
+
+ /* Default to 4K pages only */
+ memcpy(mmu_psize_defs, mmu_psize_defaults_old,
+ sizeof(mmu_psize_defaults_old));
+
+ /*
+ * Try to find the available page sizes in the device-tree
+ */
+ rc = of_scan_flat_dt(htab_dt_scan_page_sizes, NULL);
+ if (rc != 0) /* Found */
+ goto found;
+
+ /*
+ * Not in the device-tree, let's fallback on known size
+ * list for 16M capable GP & GR
+ */
+ if ((systemcfg->platform != PLATFORM_ISERIES_LPAR) &&
+ cpu_has_feature(CPU_FTR_16M_PAGE))
+ memcpy(mmu_psize_defs, mmu_psize_defaults_gp,
+ sizeof(mmu_psize_defaults_gp));
+ found:
+ /*
+ * Pick a size for the linear mapping. Currently, we only support
+ * 16M, 1M and 4K which is the default
+ */
+ if (mmu_psize_defs[MMU_PAGE_16M].shift)
+ mmu_linear_psize = MMU_PAGE_16M;
+ else if (mmu_psize_defs[MMU_PAGE_1M].shift)
+ mmu_linear_psize = MMU_PAGE_1M;
+
+ /*
+ * Pick a size for the ordinary pages. Default is 4K, we support
+ * 64K if cache inhibited large pages are supported by the
+ * processor
+ */
+#ifdef CONFIG_PPC_64K_PAGES
+ if (mmu_psize_defs[MMU_PAGE_64K].shift &&
+ cpu_has_feature(CPU_FTR_CI_LARGE_PAGE))
+ mmu_virtual_psize = MMU_PAGE_64K;
+#endif
+
+ printk(KERN_INFO "Page orders: linear mapping = %d, others = %d\n",
+ mmu_psize_defs[mmu_linear_psize].shift,
+ mmu_psize_defs[mmu_virtual_psize].shift);
+
+#ifdef CONFIG_HUGETLB_PAGE
+ /* Init large page size. Currently, we pick 16M or 1M depending
+ * on what is available
+ */
+ if (mmu_psize_defs[MMU_PAGE_16M].shift)
+ mmu_huge_psize = MMU_PAGE_16M;
+ /* With 4k/4level pagetables, we can't (for now) cope with a
+ * huge page size < PMD_SIZE */
+ else if (mmu_psize_defs[MMU_PAGE_1M].shift)
+ mmu_huge_psize = MMU_PAGE_1M;
+
+ /* Calculate HPAGE_SHIFT and sanity check it */
+ if (mmu_psize_defs[mmu_huge_psize].shift > MIN_HUGEPTE_SHIFT &&
+ mmu_psize_defs[mmu_huge_psize].shift < SID_SHIFT)
+ HPAGE_SHIFT = mmu_psize_defs[mmu_huge_psize].shift;
+ else
+ HPAGE_SHIFT = 0; /* No huge pages dude ! */
+#endif /* CONFIG_HUGETLB_PAGE */
+}
+
+static int __init htab_dt_scan_pftsize(unsigned long node,
+ const char *uname, int depth,
+ void *data)
+{
+ char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ u32 *prop;
+
+ /* We are scanning "cpu" nodes only */
+ if (type == NULL || strcmp(type, "cpu") != 0)
+ return 0;
+
+ prop = (u32 *)of_get_flat_dt_prop(node, "ibm,pft-size", NULL);
+ if (prop != NULL) {
+ /* pft_size[0] is the NUMA CEC cookie */
+ ppc64_pft_size = prop[1];
+ return 1;
+ }
+ return 0;
+}
+
+static unsigned long __init htab_get_table_size(void)
{
unsigned long rnd_mem_size, pteg_count;
- /* If hash size wasn't obtained in prom.c, we calculate it now based on
- * the total RAM size
+ /* If hash size isn't already provided by the platform, we try to
+ * retreive it from the device-tree. If it's not there neither, we
+ * calculate it now based on the total RAM size
*/
+ if (ppc64_pft_size == 0)
+ of_scan_flat_dt(htab_dt_scan_pftsize, NULL);
if (ppc64_pft_size)
return 1UL << ppc64_pft_size;
@@ -181,17 +392,21 @@ void __init htab_initialize(void)
unsigned long table, htab_size_bytes;
unsigned long pteg_count;
unsigned long mode_rw;
- int i, use_largepages = 0;
unsigned long base = 0, size = 0;
+ int i;
+
extern unsigned long tce_alloc_start, tce_alloc_end;
DBG(" -> htab_initialize()\n");
+ /* Initialize page sizes */
+ htab_init_page_sizes();
+
/*
* Calculate the required size of the htab. We want the number of
* PTEGs to equal one half the number of real pages.
*/
- htab_size_bytes = get_hashtable_size();
+ htab_size_bytes = htab_get_table_size();
pteg_count = htab_size_bytes >> 7;
/* For debug, make the HTAB 1/8 as big as it normally would be. */
@@ -211,14 +426,11 @@ void __init htab_initialize(void)
* the absolute address space.
*/
table = lmb_alloc(htab_size_bytes, htab_size_bytes);
+ BUG_ON(table == 0);
DBG("Hash table allocated at %lx, size: %lx\n", table,
htab_size_bytes);
- if ( !table ) {
- ppc64_terminate_msg(0x20, "hpt space");
- loop_forever();
- }
htab_address = abs_to_virt(table);
/* htab absolute addr + encoded htabsize */
@@ -234,8 +446,6 @@ void __init htab_initialize(void)
* _NOT_ map it to avoid cache paradoxes as it's remapped non
* cacheable later on
*/
- if (cpu_has_feature(CPU_FTR_16M_PAGE))
- use_largepages = 1;
/* create bolted the linear mapping in the hash table */
for (i=0; i < lmb.memory.cnt; i++) {
@@ -246,27 +456,32 @@ void __init htab_initialize(void)
#ifdef CONFIG_U3_DART
/* Do not map the DART space. Fortunately, it will be aligned
- * in such a way that it will not cross two lmb regions and will
- * fit within a single 16Mb page.
- * The DART space is assumed to be a full 16Mb region even if we
- * only use 2Mb of that space. We will use more of it later for
- * AGP GART. We have to use a full 16Mb large page.
+ * in such a way that it will not cross two lmb regions and
+ * will fit within a single 16Mb page.
+ * The DART space is assumed to be a full 16Mb region even if
+ * we only use 2Mb of that space. We will use more of it later
+ * for AGP GART. We have to use a full 16Mb large page.
*/
DBG("DART base: %lx\n", dart_tablebase);
if (dart_tablebase != 0 && dart_tablebase >= base
&& dart_tablebase < (base + size)) {
if (base != dart_tablebase)
- create_pte_mapping(base, dart_tablebase, mode_rw,
- use_largepages);
+ BUG_ON(htab_bolt_mapping(base, dart_tablebase,
+ base, mode_rw,
+ mmu_linear_psize));
if ((base + size) > (dart_tablebase + 16*MB))
- create_pte_mapping(dart_tablebase + 16*MB, base + size,
- mode_rw, use_largepages);
+ BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB,
+ base + size,
+ dart_tablebase+16*MB,
+ mode_rw,
+ mmu_linear_psize));
continue;
}
#endif /* CONFIG_U3_DART */
- create_pte_mapping(base, base + size, mode_rw, use_largepages);
- }
+ BUG_ON(htab_bolt_mapping(base, base + size, base,
+ mode_rw, mmu_linear_psize));
+ }
/*
* If we have a memory_limit and we've allocated TCEs then we need to
@@ -282,8 +497,9 @@ void __init htab_initialize(void)
if (base + size >= tce_alloc_start)
tce_alloc_start = base + size + 1;
- create_pte_mapping(tce_alloc_start, tce_alloc_end,
- mode_rw, use_largepages);
+ BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end,
+ tce_alloc_start, mode_rw,
+ mmu_linear_psize));
}
DBG(" <- htab_initialize()\n");
@@ -298,9 +514,6 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
{
struct page *page;
- if (!pfn_valid(pte_pfn(pte)))
- return pp;
-
page = pte_page(pte);
/* page is dirty */
@@ -309,7 +522,7 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
__flush_dcache_icache(page_address(page));
set_bit(PG_arch_1, &page->flags);
} else
- pp |= HW_NO_EXEC;
+ pp |= HPTE_R_N;
}
return pp;
}
@@ -325,94 +538,169 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
unsigned long vsid;
struct mm_struct *mm;
pte_t *ptep;
- int ret;
- int user_region = 0;
- int local = 0;
cpumask_t tmp;
+ int rc, user_region = 0, local = 0;
- if ((ea & ~REGION_MASK) >= PGTABLE_RANGE)
- return 1;
+ DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n",
+ ea, access, trap);
+ if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) {
+ DBG_LOW(" out of pgtable range !\n");
+ return 1;
+ }
+
+ /* Get region & vsid */
switch (REGION_ID(ea)) {
case USER_REGION_ID:
user_region = 1;
mm = current->mm;
- if (! mm)
+ if (! mm) {
+ DBG_LOW(" user region with no mm !\n");
return 1;
-
+ }
vsid = get_vsid(mm->context.id, ea);
break;
case VMALLOC_REGION_ID:
mm = &init_mm;
vsid = get_kernel_vsid(ea);
break;
-#if 0
- case KERNEL_REGION_ID:
- /*
- * Should never get here - entire 0xC0... region is bolted.
- * Send the problem up to do_page_fault
- */
-#endif
default:
/* Not a valid range
* Send the problem up to do_page_fault
*/
return 1;
- break;
}
+ DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid);
+ /* Get pgdir */
pgdir = mm->pgd;
-
if (pgdir == NULL)
return 1;
+ /* Check CPU locality */
tmp = cpumask_of_cpu(smp_processor_id());
if (user_region && cpus_equal(mm->cpu_vm_mask, tmp))
local = 1;
- /* Is this a huge page ? */
- if (unlikely(in_hugepage_area(mm->context, ea)))
- ret = hash_huge_page(mm, access, ea, vsid, local);
- else {
- ptep = find_linux_pte(pgdir, ea);
- if (ptep == NULL)
- return 1;
- ret = __hash_page(ea, access, vsid, ptep, trap, local);
+ /* Handle hugepage regions */
+ if (unlikely(in_hugepage_area(mm->context, ea))) {
+ DBG_LOW(" -> huge page !\n");
+ return hash_huge_page(mm, access, ea, vsid, local);
}
- return ret;
+ /* Get PTE and page size from page tables */
+ ptep = find_linux_pte(pgdir, ea);
+ if (ptep == NULL || !pte_present(*ptep)) {
+ DBG_LOW(" no PTE !\n");
+ return 1;
+ }
+
+#ifndef CONFIG_PPC_64K_PAGES
+ DBG_LOW(" i-pte: %016lx\n", pte_val(*ptep));
+#else
+ DBG_LOW(" i-pte: %016lx %016lx\n", pte_val(*ptep),
+ pte_val(*(ptep + PTRS_PER_PTE)));
+#endif
+ /* Pre-check access permissions (will be re-checked atomically
+ * in __hash_page_XX but this pre-check is a fast path
+ */
+ if (access & ~pte_val(*ptep)) {
+ DBG_LOW(" no access !\n");
+ return 1;
+ }
+
+ /* Do actual hashing */
+#ifndef CONFIG_PPC_64K_PAGES
+ rc = __hash_page_4K(ea, access, vsid, ptep, trap, local);
+#else
+ if (mmu_virtual_psize == MMU_PAGE_64K)
+ rc = __hash_page_64K(ea, access, vsid, ptep, trap, local);
+ else
+ rc = __hash_page_4K(ea, access, vsid, ptep, trap, local);
+#endif /* CONFIG_PPC_64K_PAGES */
+
+#ifndef CONFIG_PPC_64K_PAGES
+ DBG_LOW(" o-pte: %016lx\n", pte_val(*ptep));
+#else
+ DBG_LOW(" o-pte: %016lx %016lx\n", pte_val(*ptep),
+ pte_val(*(ptep + PTRS_PER_PTE)));
+#endif
+ DBG_LOW(" -> rc=%d\n", rc);
+ return rc;
}
-void flush_hash_page(unsigned long va, pte_t pte, int local)
+void hash_preload(struct mm_struct *mm, unsigned long ea,
+ unsigned long access, unsigned long trap)
{
- unsigned long vpn, hash, secondary, slot;
- unsigned long huge = pte_huge(pte);
+ unsigned long vsid;
+ void *pgdir;
+ pte_t *ptep;
+ cpumask_t mask;
+ unsigned long flags;
+ int local = 0;
- if (huge)
- vpn = va >> HPAGE_SHIFT;
+ /* We don't want huge pages prefaulted for now
+ */
+ if (unlikely(in_hugepage_area(mm->context, ea)))
+ return;
+
+ DBG_LOW("hash_preload(mm=%p, mm->pgdir=%p, ea=%016lx, access=%lx,"
+ " trap=%lx\n", mm, mm->pgd, ea, access, trap);
+
+ /* Get PTE, VSID, access mask */
+ pgdir = mm->pgd;
+ if (pgdir == NULL)
+ return;
+ ptep = find_linux_pte(pgdir, ea);
+ if (!ptep)
+ return;
+ vsid = get_vsid(mm->context.id, ea);
+
+ /* Hash it in */
+ local_irq_save(flags);
+ mask = cpumask_of_cpu(smp_processor_id());
+ if (cpus_equal(mm->cpu_vm_mask, mask))
+ local = 1;
+#ifndef CONFIG_PPC_64K_PAGES
+ __hash_page_4K(ea, access, vsid, ptep, trap, local);
+#else
+ if (mmu_virtual_psize == MMU_PAGE_64K)
+ __hash_page_64K(ea, access, vsid, ptep, trap, local);
else
- vpn = va >> PAGE_SHIFT;
- hash = hpt_hash(vpn, huge);
- secondary = (pte_val(pte) & _PAGE_SECONDARY) >> 15;
- if (secondary)
- hash = ~hash;
- slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
- slot += (pte_val(pte) & _PAGE_GROUP_IX) >> 12;
+ __hash_page_4K(ea, access, vsid, ptep, trap, local);
+#endif /* CONFIG_PPC_64K_PAGES */
+ local_irq_restore(flags);
+}
- ppc_md.hpte_invalidate(slot, va, huge, local);
+void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int local)
+{
+ unsigned long hash, index, shift, hidx, slot;
+
+ DBG_LOW("flush_hash_page(va=%016x)\n", va);
+ pte_iterate_hashed_subpages(pte, psize, va, index, shift) {
+ hash = hpt_hash(va, shift);
+ hidx = __rpte_to_hidx(pte, index);
+ if (hidx & _PTEIDX_SECONDARY)
+ hash = ~hash;
+ slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+ slot += hidx & _PTEIDX_GROUP_IX;
+ DBG_LOW(" sub %d: hash=%x, hidx=%x\n", index, slot, hidx);
+ ppc_md.hpte_invalidate(slot, va, psize, local);
+ } pte_iterate_hashed_end();
}
void flush_hash_range(unsigned long number, int local)
{
- if (ppc_md.flush_hash_range) {
+ if (ppc_md.flush_hash_range)
ppc_md.flush_hash_range(number, local);
- } else {
+ else {
int i;
struct ppc64_tlb_batch *batch =
&__get_cpu_var(ppc64_tlb_batch);
for (i = 0; i < number; i++)
- flush_hash_page(batch->vaddr[i], batch->pte[i], local);
+ flush_hash_page(batch->vaddr[i], batch->pte[i],
+ batch->psize, local);
}
}
@@ -452,6 +740,18 @@ void __init htab_finish_init(void)
extern unsigned int *htab_call_hpte_remove;
extern unsigned int *htab_call_hpte_updatepp;
+#ifdef CONFIG_PPC_64K_PAGES
+ extern unsigned int *ht64_call_hpte_insert1;
+ extern unsigned int *ht64_call_hpte_insert2;
+ extern unsigned int *ht64_call_hpte_remove;
+ extern unsigned int *ht64_call_hpte_updatepp;
+
+ make_bl(ht64_call_hpte_insert1, ppc_md.hpte_insert);
+ make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert);
+ make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove);
+ make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp);
+#endif /* CONFIG_PPC_64K_PAGES */
+
make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert);
make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert);
make_bl(htab_call_hpte_remove, ppc_md.hpte_remove);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 0ea0994ed974..426c269e552e 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -47,10 +47,25 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
pu = pud_offset(pg, addr);
if (!pud_none(*pu)) {
pm = pmd_offset(pu, addr);
+#ifdef CONFIG_PPC_64K_PAGES
+ /* Currently, we use the normal PTE offset within full
+ * size PTE pages, thus our huge PTEs are scattered in
+ * the PTE page and we do waste some. We may change
+ * that in the future, but the current mecanism keeps
+ * things much simpler
+ */
+ if (!pmd_none(*pm)) {
+ /* Note: pte_offset_* are all equivalent on
+ * ppc64 as we don't have HIGHMEM
+ */
+ pt = pte_offset_kernel(pm, addr);
+ return pt;
+ }
+#else /* CONFIG_PPC_64K_PAGES */
+ /* On 4k pages, we put huge PTEs in the PMD page */
pt = (pte_t *)pm;
- BUG_ON(!pmd_none(*pm)
- && !(pte_present(*pt) && pte_huge(*pt)));
return pt;
+#endif /* CONFIG_PPC_64K_PAGES */
}
}
@@ -74,9 +89,16 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
if (pu) {
pm = pmd_alloc(mm, pu, addr);
if (pm) {
+#ifdef CONFIG_PPC_64K_PAGES
+ /* See comment in huge_pte_offset. Note that if we ever
+ * want to put the page size in the PMD, we would have
+ * to open code our own pte_alloc* function in order
+ * to populate and set the size atomically
+ */
+ pt = pte_alloc_map(mm, pm, addr);
+#else /* CONFIG_PPC_64K_PAGES */
pt = (pte_t *)pm;
- BUG_ON(!pmd_none(*pm)
- && !(pte_present(*pt) && pte_huge(*pt)));
+#endif /* CONFIG_PPC_64K_PAGES */
return pt;
}
}
@@ -84,35 +106,29 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
return NULL;
}
-#define HUGEPTE_BATCH_SIZE (HPAGE_SIZE / PMD_SIZE)
-
void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte)
{
- int i;
-
if (pte_present(*ptep)) {
- pte_clear(mm, addr, ptep);
+ /* We open-code pte_clear because we need to pass the right
+ * argument to hpte_update (huge / !huge)
+ */
+ unsigned long old = pte_update(ptep, ~0UL);
+ if (old & _PAGE_HASHPTE)
+ hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1);
flush_tlb_pending();
}
-
- for (i = 0; i < HUGEPTE_BATCH_SIZE; i++) {
- *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
- ptep++;
- }
+ *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
}
pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
unsigned long old = pte_update(ptep, ~0UL);
- int i;
if (old & _PAGE_HASHPTE)
- hpte_update(mm, addr, old, 0);
-
- for (i = 1; i < HUGEPTE_BATCH_SIZE; i++)
- ptep[i] = __pte(0);
+ hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1);
+ *ptep = __pte(0);
return __pte(old);
}
@@ -196,6 +212,12 @@ static int prepare_high_area_for_htlb(struct mm_struct *mm, unsigned long area)
BUG_ON(area >= NUM_HIGH_AREAS);
+ /* Hack, so that each addresses is controlled by exactly one
+ * of the high or low area bitmaps, the first high area starts
+ * at 4GB, not 0 */
+ if (start == 0)
+ start = 0x100000000UL;
+
/* Check no VMAs are in the region */
vma = find_vma(mm, start);
if (vma && (vma->vm_start < end))
@@ -563,6 +585,8 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
int lastshift;
u16 areamask, curareas;
+ if (HPAGE_SHIFT == 0)
+ return -EINVAL;
if (len & ~HPAGE_MASK)
return -EINVAL;
@@ -619,19 +643,15 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
unsigned long ea, unsigned long vsid, int local)
{
pte_t *ptep;
- unsigned long va, vpn;
- pte_t old_pte, new_pte;
- unsigned long rflags, prpn;
+ unsigned long old_pte, new_pte;
+ unsigned long va, rflags, pa;
long slot;
int err = 1;
- spin_lock(&mm->page_table_lock);
-
ptep = huge_pte_offset(mm, ea);
/* Search the Linux page table for a match with va */
va = (vsid << 28) | (ea & 0x0fffffff);
- vpn = va >> HPAGE_SHIFT;
/*
* If no pte found or not present, send the problem up to
@@ -640,8 +660,6 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
if (unlikely(!ptep || pte_none(*ptep)))
goto out;
-/* BUG_ON(pte_bad(*ptep)); */
-
/*
* Check the user's access rights to the page. If access should be
* prevented then send the problem up to do_page_fault.
@@ -661,58 +679,64 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
*/
- old_pte = *ptep;
- new_pte = old_pte;
+ do {
+ old_pte = pte_val(*ptep);
+ if (old_pte & _PAGE_BUSY)
+ goto out;
+ new_pte = old_pte | _PAGE_BUSY |
+ _PAGE_ACCESSED | _PAGE_HASHPTE;
+ } while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
+ old_pte, new_pte));
- rflags = 0x2 | (! (pte_val(new_pte) & _PAGE_RW));
+ rflags = 0x2 | (!(new_pte & _PAGE_RW));
/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
- rflags |= ((pte_val(new_pte) & _PAGE_EXEC) ? 0 : HW_NO_EXEC);
+ rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
/* Check if pte already has an hpte (case 2) */
- if (unlikely(pte_val(old_pte) & _PAGE_HASHPTE)) {
+ if (unlikely(old_pte & _PAGE_HASHPTE)) {
/* There MIGHT be an HPTE for this pte */
unsigned long hash, slot;
- hash = hpt_hash(vpn, 1);
- if (pte_val(old_pte) & _PAGE_SECONDARY)
+ hash = hpt_hash(va, HPAGE_SHIFT);
+ if (old_pte & _PAGE_F_SECOND)
hash = ~hash;
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
- slot += (pte_val(old_pte) & _PAGE_GROUP_IX) >> 12;
+ slot += (old_pte & _PAGE_F_GIX) >> 12;
if (ppc_md.hpte_updatepp(slot, rflags, va, 1, local) == -1)
- pte_val(old_pte) &= ~_PAGE_HPTEFLAGS;
+ old_pte &= ~_PAGE_HPTEFLAGS;
}
- if (likely(!(pte_val(old_pte) & _PAGE_HASHPTE))) {
- unsigned long hash = hpt_hash(vpn, 1);
+ if (likely(!(old_pte & _PAGE_HASHPTE))) {
+ unsigned long hash = hpt_hash(va, HPAGE_SHIFT);
unsigned long hpte_group;
- prpn = pte_pfn(old_pte);
+ pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
repeat:
hpte_group = ((hash & htab_hash_mask) *
HPTES_PER_GROUP) & ~0x7UL;
- /* Update the linux pte with the HPTE slot */
- pte_val(new_pte) &= ~_PAGE_HPTEFLAGS;
- pte_val(new_pte) |= _PAGE_HASHPTE;
+ /* clear HPTE slot informations in new PTE */
+ new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
/* Add in WIMG bits */
/* XXX We should store these in the pte */
+ /* --BenH: I think they are ... */
rflags |= _PAGE_COHERENT;
- slot = ppc_md.hpte_insert(hpte_group, va, prpn,
- HPTE_V_LARGE, rflags);
+ /* Insert into the hash table, primary slot */
+ slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
+ mmu_huge_psize);
/* Primary is full, try the secondary */
if (unlikely(slot == -1)) {
- pte_val(new_pte) |= _PAGE_SECONDARY;
+ new_pte |= _PAGE_F_SECOND;
hpte_group = ((~hash & htab_hash_mask) *
HPTES_PER_GROUP) & ~0x7UL;
- slot = ppc_md.hpte_insert(hpte_group, va, prpn,
- HPTE_V_LARGE |
+ slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
HPTE_V_SECONDARY,
- rflags);
+ mmu_huge_psize);
if (slot == -1) {
if (mftb() & 0x1)
hpte_group = ((hash & htab_hash_mask) *
@@ -726,20 +750,18 @@ repeat:
if (unlikely(slot == -2))
panic("hash_huge_page: pte_insert failed\n");
- pte_val(new_pte) |= (slot<<12) & _PAGE_GROUP_IX;
-
- /*
- * No need to use ldarx/stdcx here because all who
- * might be updating the pte will hold the
- * page_table_lock
- */
- *ptep = new_pte;
+ new_pte |= (slot << 12) & _PAGE_F_GIX;
}
+ /*
+ * No need to use ldarx/stdcx here because all who
+ * might be updating the pte will hold the
+ * page_table_lock
+ */
+ *ptep = __pte(new_pte & ~_PAGE_BUSY);
+
err = 0;
out:
- spin_unlock(&mm->page_table_lock);
-
return err;
}
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index b0fc822ec29f..dfe7fa37b41a 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -188,12 +188,21 @@ static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags)
memset(addr, 0, kmem_cache_size(cache));
}
+#ifdef CONFIG_PPC_64K_PAGES
+static const int pgtable_cache_size[2] = {
+ PTE_TABLE_SIZE, PGD_TABLE_SIZE
+};
+static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
+ "pte_pmd_cache", "pgd_cache",
+};
+#else
static const int pgtable_cache_size[2] = {
PTE_TABLE_SIZE, PMD_TABLE_SIZE
};
static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
"pgd_pte_cache", "pud_pmd_cache",
};
+#endif /* CONFIG_PPC_64K_PAGES */
kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
@@ -201,19 +210,14 @@ void pgtable_cache_init(void)
{
int i;
- BUILD_BUG_ON(PTE_TABLE_SIZE != pgtable_cache_size[PTE_CACHE_NUM]);
- BUILD_BUG_ON(PMD_TABLE_SIZE != pgtable_cache_size[PMD_CACHE_NUM]);
- BUILD_BUG_ON(PUD_TABLE_SIZE != pgtable_cache_size[PUD_CACHE_NUM]);
- BUILD_BUG_ON(PGD_TABLE_SIZE != pgtable_cache_size[PGD_CACHE_NUM]);
-
for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) {
int size = pgtable_cache_size[i];
const char *name = pgtable_cache_name[i];
pgtable_cache[i] = kmem_cache_create(name,
size, size,
- SLAB_HWCACHE_ALIGN
- | SLAB_MUST_HWCACHE_ALIGN,
+ SLAB_HWCACHE_ALIGN |
+ SLAB_MUST_HWCACHE_ALIGN,
zero_ctor,
NULL);
if (! pgtable_cache[i])
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 117b00012e14..7faa46b71f21 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -61,6 +61,9 @@ int init_bootmem_done;
int mem_init_done;
unsigned long memory_limit;
+extern void hash_preload(struct mm_struct *mm, unsigned long ea,
+ unsigned long access, unsigned long trap);
+
/*
* This is called by /dev/mem to know if a given address has to
* be mapped non-cacheable or not
@@ -493,18 +496,10 @@ EXPORT_SYMBOL(flush_icache_user_range);
void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
pte_t pte)
{
- /* handle i-cache coherency */
- unsigned long pfn = pte_pfn(pte);
-#ifdef CONFIG_PPC32
- pmd_t *pmd;
-#else
- unsigned long vsid;
- void *pgdir;
- pte_t *ptep;
- int local = 0;
- cpumask_t tmp;
- unsigned long flags;
+#ifdef CONFIG_PPC_STD_MMU
+ unsigned long access = 0, trap;
#endif
+ unsigned long pfn = pte_pfn(pte);
/* handle i-cache coherency */
if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE) &&
@@ -535,30 +530,21 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
if (!pte_young(pte) || address >= TASK_SIZE)
return;
-#ifdef CONFIG_PPC32
- if (Hash == 0)
+
+ /* We try to figure out if we are coming from an instruction
+ * access fault and pass that down to __hash_page so we avoid
+ * double-faulting on execution of fresh text. We have to test
+ * for regs NULL since init will get here first thing at boot
+ *
+ * We also avoid filling the hash if not coming from a fault
+ */
+ if (current->thread.regs == NULL)
return;
- pmd = pmd_offset(pgd_offset(vma->vm_mm, address), address);
- if (!pmd_none(*pmd))
- add_hash_page(vma->vm_mm->context, address, pmd_val(*pmd));
-#else
- pgdir = vma->vm_mm->pgd;
- if (pgdir == NULL)
+ trap = TRAP(current->thread.regs);
+ if (trap == 0x400)
+ access |= _PAGE_EXEC;
+ else if (trap != 0x300)
return;
-
- ptep = find_linux_pte(pgdir, address);
- if (!ptep)
- return;
-
- vsid = get_vsid(vma->vm_mm->context.id, address);
-
- local_irq_save(flags);
- tmp = cpumask_of_cpu(smp_processor_id());
- if (cpus_equal(vma->vm_mm->cpu_vm_mask, tmp))
- local = 1;
-
- __hash_page(address, 0, vsid, ptep, 0x300, local);
- local_irq_restore(flags);
-#endif
-#endif
+ hash_preload(vma->vm_mm, address, access, trap);
+#endif /* CONFIG_PPC_STD_MMU */
}
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index b79a78206135..51b786940971 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -101,7 +101,6 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
- unsigned long vsid;
if (mem_init_done) {
pgdp = pgd_offset_k(ea);
@@ -117,28 +116,15 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
__pgprot(flags)));
} else {
- unsigned long va, vpn, hash, hpteg;
-
/*
* If the mm subsystem is not fully up, we cannot create a
* linux page table entry for this mapping. Simply bolt an
* entry in the hardware page table.
+ *
*/
- vsid = get_kernel_vsid(ea);
- va = (vsid << 28) | (ea & 0xFFFFFFF);
- vpn = va >> PAGE_SHIFT;
-
- hash = hpt_hash(vpn, 0);
-
- hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
-
- /* Panic if a pte grpup is full */
- if (ppc_md.hpte_insert(hpteg, va, pa >> PAGE_SHIFT,
- HPTE_V_BOLTED,
- _PAGE_NO_CACHE|_PAGE_GUARDED|PP_RWXX)
- == -1) {
- panic("map_io_page: could not insert mapping");
- }
+ if (htab_bolt_mapping(ea, ea + PAGE_SIZE, pa, flags,
+ mmu_virtual_psize))
+ panic("Can't map bolted IO mapping");
}
return 0;
}
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index cef9e83cc7e9..ed7fcfe5fd37 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -178,6 +178,21 @@ void __init setbat(int index, unsigned long virt, unsigned long phys,
bat_addrs[index].phys = phys;
}
+/*
+ * Preload a translation in the hash table
+ */
+void hash_preload(struct mm_struct *mm, unsigned long ea,
+ unsigned long access, unsigned long trap)
+{
+ pmd_t *pmd;
+
+ if (Hash == 0)
+ return;
+ pmd = pmd_offset(pgd_offset(mm, ea), ea);
+ if (!pmd_none(*pmd))
+ add_hash_page(mm->context, ea, pmd_val(*pmd));
+}
+
/*
* Initialize the hash table and patch the instructions in hashtable.S.
*/
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 0473953f6a37..60e852f2f8e5 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -14,14 +14,32 @@
* 2 of the License, or (at your option) any later version.
*/
+#undef DEBUG
+
#include
#include
#include
#include
#include
#include
+#include
-extern void slb_allocate(unsigned long ea);
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+extern void slb_allocate_realmode(unsigned long ea);
+extern void slb_allocate_user(unsigned long ea);
+
+static void slb_allocate(unsigned long ea)
+{
+ /* Currently, we do real mode for all SLBs including user, but
+ * that will change if we bring back dynamic VSIDs
+ */
+ slb_allocate_realmode(ea);
+}
static inline unsigned long mk_esid_data(unsigned long ea, unsigned long slot)
{
@@ -46,13 +64,15 @@ static void slb_flush_and_rebolt(void)
{
/* If you change this make sure you change SLB_NUM_BOLTED
* appropriately too. */
- unsigned long ksp_flags = SLB_VSID_KERNEL;
+ unsigned long linear_llp, virtual_llp, lflags, vflags;
unsigned long ksp_esid_data;
WARN_ON(!irqs_disabled());
- if (cpu_has_feature(CPU_FTR_16M_PAGE))
- ksp_flags |= SLB_VSID_L;
+ linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
+ virtual_llp = mmu_psize_defs[mmu_virtual_psize].sllp;
+ lflags = SLB_VSID_KERNEL | linear_llp;
+ vflags = SLB_VSID_KERNEL | virtual_llp;
ksp_esid_data = mk_esid_data(get_paca()->kstack, 2);
if ((ksp_esid_data & ESID_MASK) == KERNELBASE)
@@ -67,9 +87,9 @@ static void slb_flush_and_rebolt(void)
/* Slot 2 - kernel stack */
"slbmte %2,%3\n"
"isync"
- :: "r"(mk_vsid_data(VMALLOCBASE, SLB_VSID_KERNEL)),
+ :: "r"(mk_vsid_data(VMALLOCBASE, vflags)),
"r"(mk_esid_data(VMALLOCBASE, 1)),
- "r"(mk_vsid_data(ksp_esid_data, ksp_flags)),
+ "r"(mk_vsid_data(ksp_esid_data, lflags)),
"r"(ksp_esid_data)
: "memory");
}
@@ -102,6 +122,9 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
get_paca()->slb_cache_ptr = 0;
get_paca()->context = mm->context;
+#ifdef CONFIG_PPC_64K_PAGES
+ get_paca()->pgdir = mm->pgd;
+#endif /* CONFIG_PPC_64K_PAGES */
/*
* preload some userspace segments into the SLB.
@@ -131,28 +154,77 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
slb_allocate(unmapped_base);
}
+static inline void patch_slb_encoding(unsigned int *insn_addr,
+ unsigned int immed)
+{
+ /* Assume the instruction had a "0" immediate value, just
+ * "or" in the new value
+ */
+ *insn_addr |= immed;
+ flush_icache_range((unsigned long)insn_addr, 4+
+ (unsigned long)insn_addr);
+}
+
void slb_initialize(void)
{
+ unsigned long linear_llp, virtual_llp;
+ static int slb_encoding_inited;
+ extern unsigned int *slb_miss_kernel_load_linear;
+ extern unsigned int *slb_miss_kernel_load_virtual;
+ extern unsigned int *slb_miss_user_load_normal;
+#ifdef CONFIG_HUGETLB_PAGE
+ extern unsigned int *slb_miss_user_load_huge;
+ unsigned long huge_llp;
+
+ huge_llp = mmu_psize_defs[mmu_huge_psize].sllp;
+#endif
+
+ /* Prepare our SLB miss handler based on our page size */
+ linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
+ virtual_llp = mmu_psize_defs[mmu_virtual_psize].sllp;
+ if (!slb_encoding_inited) {
+ slb_encoding_inited = 1;
+ patch_slb_encoding(slb_miss_kernel_load_linear,
+ SLB_VSID_KERNEL | linear_llp);
+ patch_slb_encoding(slb_miss_kernel_load_virtual,
+ SLB_VSID_KERNEL | virtual_llp);
+ patch_slb_encoding(slb_miss_user_load_normal,
+ SLB_VSID_USER | virtual_llp);
+
+ DBG("SLB: linear LLP = %04x\n", linear_llp);
+ DBG("SLB: virtual LLP = %04x\n", virtual_llp);
+#ifdef CONFIG_HUGETLB_PAGE
+ patch_slb_encoding(slb_miss_user_load_huge,
+ SLB_VSID_USER | huge_llp);
+ DBG("SLB: huge LLP = %04x\n", huge_llp);
+#endif
+ }
+
/* On iSeries the bolted entries have already been set up by
* the hypervisor from the lparMap data in head.S */
#ifndef CONFIG_PPC_ISERIES
- unsigned long flags = SLB_VSID_KERNEL;
+ {
+ unsigned long lflags, vflags;
- /* Invalidate the entire SLB (even slot 0) & all the ERATS */
- if (cpu_has_feature(CPU_FTR_16M_PAGE))
- flags |= SLB_VSID_L;
+ lflags = SLB_VSID_KERNEL | linear_llp;
+ vflags = SLB_VSID_KERNEL | virtual_llp;
- asm volatile("isync":::"memory");
- asm volatile("slbmte %0,%0"::"r" (0) : "memory");
+ /* Invalidate the entire SLB (even slot 0) & all the ERATS */
+ asm volatile("isync":::"memory");
+ asm volatile("slbmte %0,%0"::"r" (0) : "memory");
asm volatile("isync; slbia; isync":::"memory");
- create_slbe(KERNELBASE, flags, 0);
- create_slbe(VMALLOCBASE, SLB_VSID_KERNEL, 1);
+ create_slbe(KERNELBASE, lflags, 0);
+
+ /* VMALLOC space has 4K pages always for now */
+ create_slbe(VMALLOCBASE, vflags, 1);
+
/* We don't bolt the stack for the time being - we're in boot,
* so the stack is in the bolted segment. By the time it goes
* elsewhere, we'll call _switch() which will bolt in the new
* one. */
asm volatile("isync":::"memory");
-#endif
+ }
+#endif /* CONFIG_PPC_ISERIES */
get_paca()->stab_rr = SLB_NUM_BOLTED;
}
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index a3a03da503bc..950ffc5848c7 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -18,25 +18,166 @@
#include
#include
-#include
-#include
#include
#include