mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 18:54:09 +08:00
ARM: dts: imx: add Gateworks Ventana GW553x support
The Gateworks Ventana GW553x is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * small form factor (35x70mm) * 512MB DDR3 DRAM (2x32bit) (options up to 2GB) * 256MB NAND flash (4GB option) * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCI socket (with PCIe, USB, SIM) * 1x microSD socket * 1x SIM socket * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * analog CVBS video in * GPS (optional uBlox EVA-M8M) * Application headers: - 2x TTL UART (TX/RX) - 4x TTL GPIO (3x configurable as PWM) - 3x CVBS Analog video input (1x decoder with 3x selectable inputs) * Front panel connectors: - micro-HDMI audio/video out - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG See http://www.gateworks.com for more info Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
parent
b28c9bf65c
commit
0a88c95eed
@ -330,6 +330,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
||||
imx6dl-gw54xx.dtb \
|
||||
imx6dl-gw551x.dtb \
|
||||
imx6dl-gw552x.dtb \
|
||||
imx6dl-gw553x.dtb \
|
||||
imx6dl-hummingboard.dtb \
|
||||
imx6dl-nit6xlite.dtb \
|
||||
imx6dl-nitrogen6x.dtb \
|
||||
@ -368,6 +369,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
||||
imx6q-gw54xx.dtb \
|
||||
imx6q-gw551x.dtb \
|
||||
imx6q-gw552x.dtb \
|
||||
imx6q-gw553x.dtb \
|
||||
imx6q-h100.dtb \
|
||||
imx6q-hummingboard.dtb \
|
||||
imx6q-icore-rqs.dtb \
|
||||
|
55
arch/arm/boot/dts/imx6dl-gw553x.dts
Normal file
55
arch/arm/boot/dts/imx6dl-gw553x.dts
Normal file
@ -0,0 +1,55 @@
|
||||
/*
|
||||
* Copyright 2016 Gateworks Corporation
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public
|
||||
* License along with this file; if not, write to the Free
|
||||
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx6dl.dtsi"
|
||||
#include "imx6qdl-gw553x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
|
||||
compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
|
||||
};
|
55
arch/arm/boot/dts/imx6q-gw553x.dts
Normal file
55
arch/arm/boot/dts/imx6q-gw553x.dts
Normal file
@ -0,0 +1,55 @@
|
||||
/*
|
||||
* Copyright 2016 Gateworks Corporation
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public
|
||||
* License along with this file; if not, write to the Free
|
||||
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx6q.dtsi"
|
||||
#include "imx6qdl-gw553x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
|
||||
compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
|
||||
};
|
433
arch/arm/boot/dts/imx6qdl-gw553x.dtsi
Normal file
433
arch/arm/boot/dts/imx6qdl-gw553x.dtsi
Normal file
@ -0,0 +1,433 @@
|
||||
/*
|
||||
* Copyright 2016 Gateworks Corporation
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public
|
||||
* License along with this file; if not, write to the Free
|
||||
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
/* these are used by bootloader for disabling nodes */
|
||||
aliases {
|
||||
led0 = &led0;
|
||||
led1 = &led1;
|
||||
nand = &gpmi;
|
||||
usb0 = &usbh1;
|
||||
usb1 = &usbotg;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart2;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio_leds>;
|
||||
|
||||
led0: user1 {
|
||||
label = "user1";
|
||||
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
|
||||
default-state = "on";
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led1: user2 {
|
||||
label = "user2";
|
||||
gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x10000000 0x20000000>;
|
||||
};
|
||||
|
||||
pps {
|
||||
compatible = "pps-gpio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pps>;
|
||||
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P0V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5p0v: regulator-5p0v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5P0V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_usb_otg_vbus: regulator-usb-otg-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_otg_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hdmi>;
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
gpio: pca9555@23 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x23>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
eeprom1: eeprom@50 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
eeprom2: eeprom@51 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x51>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
eeprom3: eeprom@52 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x52>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
eeprom4: eeprom@53 {
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x53>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
rtc: ds1672@68 {
|
||||
compatible = "dallas,ds1672";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pcie>;
|
||||
reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pwm3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pwm4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart5>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
vbus-supply = <®_usb_otg_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg>;
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc3>;
|
||||
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
||||
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdog1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdog>;
|
||||
fsl,ext-reset-output;
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_gpmi_nand: gpminandgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
||||
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
||||
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
||||
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
||||
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
||||
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
||||
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
||||
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_hdmi: hdmigrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gpio_leds: gpioledsgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
|
||||
MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pcie: pciegrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
|
||||
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pps: ppsgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm2: pwm2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm3: pwm3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm4: pwm4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart3: uart3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart4: uart4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart5: uart5grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg: usbotggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
||||
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
||||
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
|
||||
MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
|
||||
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
|
||||
MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
|
||||
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
|
||||
MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wdog: wdoggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
|
||||
>;
|
||||
};
|
||||
};
|
Loading…
Reference in New Issue
Block a user