korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-01 08:04:22 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6

Browse Source
This commit is contained in:
Steve French 2008-02-15 21:06:08 +00:00
commit 0a3abcf75b
3071 changed files with 160869 additions and 75149 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
Documentation/00-INDEX
View File

@ -14,6 +14,7 @@ Following translations are available on the WWW:
- this file.
ABI/
- info on kernel <-> userspace ABI and relative interface stability.
BUG-HUNTING
- brute force method of doing binary search of patches to find bug.
Changes
@ -66,6 +67,8 @@ VGA-softcursor.txt
- how to change your VGA cursor from a blinking underscore.
accounting/
- documentation on accounting and taskstats.
acpi/
- info on ACPI-specific hooks in the kernel.
aoe/
- description of AoE (ATA over Ethernet) along with config examples.
applying-patches.txt
@ -106,6 +109,8 @@ cpu-hotplug.txt
- document describing CPU hotplug support in the Linux kernel.
cpu-load.txt
- document describing how CPU load statistics are collected.
cpuidle/
- info on CPU_IDLE, CPU idle state management subsystem.
cpusets.txt
- documents the cpusets feature; assign CPUs and Mem to a set of tasks.
cputopology.txt
@ -126,18 +131,16 @@ devices.txt
- plain ASCII listing of all the nodes in /dev/ with major minor #'s.
digiepca.txt
- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
dnotify.txt
- info about directory notification in Linux.
dontdiff
- file containing a list of files that should never be diff'ed.
driver-model/
- directory with info about Linux driver model.
drivers/
- directory with driver documentation (currently only EDAC).
dvb/
- info on Linux Digital Video Broadcast (DVB) subsystem.
early-userspace/
- info about initramfs, klibc, and userspace early during boot.
edac.txt
- information on EDAC - Error Detection And Correction
eisa.txt
- info on EISA bus support.
exception.txt
@ -226,6 +229,8 @@ kref.txt
- docs on adding reference counters (krefs) to kernel objects.
laptop-mode.txt
- how to conserve battery power using laptop-mode.
laptops/
- directory with laptop related info and laptop driver documentation.
ldm.txt
- a brief description of LDM (Windows Dynamic Disks).
leds-class.txt
@ -334,20 +339,8 @@ rtc.txt
- notes on how to use the Real Time Clock (aka CMOS clock) driver.
s390/
- directory with info on using Linux on the IBM S390.
sched-arch.txt
- CPU Scheduler implementation hints for architecture specific code.
sched-coding.txt
- reference for various scheduler-related methods in the O(1) scheduler.
sched-design.txt
- goals, design and implementation of the Linux O(1) scheduler.
sched-design-CFS.txt
- goals, design and implementation of the Complete Fair Scheduler.
sched-domains.txt
- information on scheduling domains.
sched-nice-design.txt
- How and why the scheduler's nice levels are implemented.
sched-stats.txt
- information on schedstats (Linux Scheduler Statistics).
scheduler/
- directory with info on the scheduler.
scsi/
- directory with info on Linux scsi support.
serial/
@ -360,14 +353,8 @@ sgi-visws.txt
- short blurb on the SGI Visual Workstations.
sh/
- directory with info on porting Linux to a new architecture.
sharedsubtree.txt
- a description of shared subtrees for namespaces.
smart-config.txt
- description of the Smart Config makefile feature.
sony-laptop.txt
- Sony Notebook Control Driver (SNC) Readme.
sonypi.txt
- info on Linux Sony Programmable I/O Device support.
sound/
- directory with info on sound card support.
sparc/
@ -398,8 +385,6 @@ sysrq.txt
- info on the magic SysRq key.
telephony/
- directory with info on telephony (e.g. voice over IP) support.
thinkpad-acpi.txt
- information on the (IBM and Lenovo) ThinkPad ACPI Extras driver.
time_interpolators.txt
- info on time interpolators.
tipar.txt

22
Documentation/ABI/testing/procfs-diskstats Normal file
View File

@ -0,0 +1,22 @@
What: /proc/diskstats
Date: February 2008
Contact: Jerome Marchand <jmarchan@redhat.com>
Description:
The /proc/diskstats file displays the I/O statistics
of block devices. Each line contains the following 14
fields:
1 - major number
2 - minor mumber
3 - device name
4 - reads completed succesfully
5 - reads merged
6 - sectors read
7 - time spent reading (ms)
8 - writes completed
9 - writes merged
10 - sectors written
11 - time spent writing (ms)
12 - I/Os currently in progress
13 - time spent doing I/Os (ms)
14 - weighted time spent doing I/Os (ms)
For more details refer to Documentation/iostats.txt

28
Documentation/ABI/testing/sysfs-block Normal file
View File

@ -0,0 +1,28 @@
What: /sys/block/<disk>/stat
Date: February 2008
Contact: Jerome Marchand <jmarchan@redhat.com>
Description:
The /sys/block/<disk>/stat files displays the I/O
statistics of disk <disk>. They contain 11 fields:
1 - reads completed succesfully
2 - reads merged
3 - sectors read
4 - time spent reading (ms)
5 - writes completed
6 - writes merged
7 - sectors written
8 - time spent writing (ms)
9 - I/Os currently in progress
10 - time spent doing I/Os (ms)
11 - weighted time spent doing I/Os (ms)
For more details refer Documentation/iostats.txt
What: /sys/block/<disk>/<part>/stat
Date: February 2008
Contact: Jerome Marchand <jmarchan@redhat.com>
Description:
The /sys/block/<disk>/<part>/stat files display the
I/O statistics of partition <part>. The format is the
same as the above-written /sys/block/<disk>/stat
format.

99
Documentation/ABI/testing/sysfs-firmware-acpi Normal file
View File

@ -0,0 +1,99 @@
What: /sys/firmware/acpi/interrupts/
Date: February 2008
Contact: Len Brown <lenb@kernel.org>
Description:
All ACPI interrupts are handled via a single IRQ,
the System Control Interrupt (SCI), which appears
as "acpi" in /proc/interrupts.
However, one of the main functions of ACPI is to make
the platform understand random hardware without
special driver support. So while the SCI handles a few
well known (fixed feature) interrupts sources, such
as the power button, it can also handle a variable
number of a "General Purpose Events" (GPE).
A GPE vectors to a specified handler in AML, which
can do a anything the BIOS writer wants from
OS context. GPE 0x12, for example, would vector
to a level or edge handler called _L12 or _E12.
The handler may do its business and return.
Or the handler may send send a Notify event
to a Linux device driver registered on an ACPI device,
such as a battery, or a processor.
To figure out where all the SCI's are coming from,
/sys/firmware/acpi/interrupts contains a file listing
every possible source, and the count of how many
times it has triggered.
$ cd /sys/firmware/acpi/interrupts
$ grep . *
error:0
ff_gbl_lock:0
ff_pmtimer:0
ff_pwr_btn:0
ff_rt_clk:0
ff_slp_btn:0
gpe00:0
gpe01:0
gpe02:0
gpe03:0
gpe04:0
gpe05:0
gpe06:0
gpe07:0
gpe08:0
gpe09:174
gpe0A:0
gpe0B:0
gpe0C:0
gpe0D:0
gpe0E:0
gpe0F:0
gpe10:0
gpe11:60
gpe12:0
gpe13:0
gpe14:0
gpe15:0
gpe16:0
gpe17:0
gpe18:0
gpe19:7
gpe1A:0
gpe1B:0
gpe1C:0
gpe1D:0
gpe1E:0
gpe1F:0
gpe_all:241
sci:241
sci - The total number of times the ACPI SCI
has claimed an interrupt.
gpe_all - count of SCI caused by GPEs.
gpeXX - count for individual GPE source
ff_gbl_lock - Global Lock
ff_pmtimer - PM Timer
ff_pwr_btn - Power Button
ff_rt_clk - Real Time Clock
ff_slp_btn - Sleep Button
error - an interrupt that can't be accounted for above.
Root has permission to clear any of these counters. Eg.
# echo 0 > gpe11
All counters can be cleared by clearing the total "sci":
# echo 0 > sci
None of these counters has an effect on the function
of the system, they are simply statistics.

2
Documentation/ABI/testing/sysfs-kernel-uids
View File

@ -11,4 +11,4 @@ Description:
example would be, if User A has shares = 1024 and user
B has shares = 2048, User B will get twice the CPU
bandwidth user A will. For more details refer
Documentation/sched-design-CFS.txt
Documentation/scheduler/sched-design-CFS.txt

17
Documentation/BUG-HUNTING
View File

@ -214,6 +214,23 @@ And recompile the kernel with CONFIG_DEBUG_INFO enabled:
gdb vmlinux
(gdb) p vt_ioctl
(gdb) l *(0x<address of vt_ioctl> + 0xda8)
or, as one command
(gdb) l *(vt_ioctl + 0xda8)
If you have a call trace, such as :-
>Call Trace:
> [<ffffffff8802c8e9>] :jbd:log_wait_commit+0xa3/0xf5
> [<ffffffff810482d9>] autoremove_wake_function+0x0/0x2e
> [<ffffffff8802770b>] :jbd:journal_stop+0x1be/0x1ee
> ...
this shows the problem in the :jbd: module. You can load that module in gdb
and list the relevant code.
gdb fs/jbd/jbd.ko
(gdb) p log_wait_commit
(gdb) l *(0x<address> + 0xa3)
or
(gdb) l *(log_wait_commit + 0xa3)
Another very useful option of the Kernel Hacking section in menuconfig is
Debug memory allocations. This will help you see whether data has been

2
Documentation/DocBook/Makefile
View File

@ -8,7 +8,7 @@
DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml \
procfs-guide.xml writing_usb_driver.xml networking.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml

20
Documentation/DocBook/filesystems.tmpl
View File

@ -398,4 +398,24 @@ an example.
</chapter>
<chapter id="splice">
<title>splice API</title>
<para>
splice is a method for moving blocks of data around inside the
kernel, without continually transferring them between the kernel
and user space.
</para>
!Ffs/splice.c
</chapter>
<chapter id="pipes">
<title>pipes API</title>
<para>
Pipe interfaces are all for in-kernel (builtin image) use.
They are not exported for use by modules.
</para>
!Iinclude/linux/pipe_fs_i.h
!Ffs/pipe.c
</chapter>
</book>

26
Documentation/DocBook/genericirq.tmpl
View File

@ -172,7 +172,7 @@
<listitem><para>Chiplevel hardware encapsulation</para></listitem>
</orderedlist>
</para>
<sect1>
<sect1 id="Interrupt_control_flow">
<title>Interrupt control flow</title>
<para>
Each interrupt is described by an interrupt descriptor structure
@ -190,7 +190,7 @@
referenced by the assigned chip descriptor structure.
</para>
</sect1>
<sect1>
<sect1 id="Highlevel_Driver_API">
<title>Highlevel Driver API</title>
<para>
The highlevel Driver API consists of following functions:
@ -210,7 +210,7 @@
See the autogenerated function documentation for details.
</para>
</sect1>
<sect1>
<sect1 id="Highlevel_IRQ_flow_handlers">
<title>Highlevel IRQ flow handlers</title>
<para>
The generic layer provides a set of pre-defined irq-flow methods:
@ -224,9 +224,9 @@
specific) are assigned to specific interrupts by the architecture
either during bootup or during device initialization.
</para>
<sect2>
<sect2 id="Default_flow_implementations">
<title>Default flow implementations</title>
<sect3>
<sect3 id="Helper_functions">
<title>Helper functions</title>
<para>
The helper functions call the chip primitives and
@ -267,9 +267,9 @@ noop(irq)
</para>
</sect3>
</sect2>
<sect2>
<sect2 id="Default_flow_handler_implementations">
<title>Default flow handler implementations</title>
<sect3>
<sect3 id="Default_Level_IRQ_flow_handler">
<title>Default Level IRQ flow handler</title>
<para>
handle_level_irq provides a generic implementation
@ -284,7 +284,7 @@ desc->chip->end();
</programlisting>
</para>
</sect3>
<sect3>
<sect3 id="Default_Edge_IRQ_flow_handler">
<title>Default Edge IRQ flow handler</title>
<para>
handle_edge_irq provides a generic implementation
@ -311,7 +311,7 @@ desc->chip->end();
</programlisting>
</para>
</sect3>
<sect3>
<sect3 id="Default_simple_IRQ_flow_handler">
<title>Default simple IRQ flow handler</title>
<para>
handle_simple_irq provides a generic implementation
@ -328,7 +328,7 @@ handle_IRQ_event(desc->action);
</programlisting>
</para>
</sect3>
<sect3>
<sect3 id="Default_per_CPU_flow_handler">
<title>Default per CPU flow handler</title>
<para>
handle_percpu_irq provides a generic implementation
@ -349,7 +349,7 @@ desc->chip->end();
</para>
</sect3>
</sect2>
<sect2>
<sect2 id="Quirks_and_optimizations">
<title>Quirks and optimizations</title>
<para>
The generic functions are intended for 'clean' architectures and chips,
@ -358,7 +358,7 @@ desc->chip->end();
overriding the highlevel irq-flow handler.
</para>
</sect2>
<sect2>
<sect2 id="Delayed_interrupt_disable">
<title>Delayed interrupt disable</title>
<para>
This per interrupt selectable feature, which was introduced by Russell
@ -380,7 +380,7 @@ desc->chip->end();
</para>
</sect2>
</sect1>
<sect1>
<sect1 id="Chiplevel_hardware_encapsulation">
<title>Chiplevel hardware encapsulation</title>
<para>
The chip level hardware descriptor structure irq_chip

86
Documentation/DocBook/kernel-api.tmpl
View File

@ -165,6 +165,7 @@ X!Ilib/string.c
!Emm/vmalloc.c
!Imm/page_alloc.c
!Emm/mempool.c
!Emm/dmapool.c
!Emm/page-writeback.c
!Emm/truncate.c
</sect1>
@ -203,65 +204,6 @@ X!Ilib/string.c
</sect1>
</chapter>
<chapter id="netcore">
<title>Linux Networking</title>
<sect1><title>Networking Base Types</title>
!Iinclude/linux/net.h
</sect1>
<sect1><title>Socket Buffer Functions</title>
!Iinclude/linux/skbuff.h
!Iinclude/net/sock.h
!Enet/socket.c
!Enet/core/skbuff.c
!Enet/core/sock.c
!Enet/core/datagram.c
!Enet/core/stream.c
</sect1>
<sect1><title>Socket Filter</title>
!Enet/core/filter.c
</sect1>
<sect1><title>Generic Network Statistics</title>
!Iinclude/linux/gen_stats.h
!Enet/core/gen_stats.c
!Enet/core/gen_estimator.c
</sect1>
<sect1><title>SUN RPC subsystem</title>
<!-- The !D functionality is not perfect, garbage has to be protected by comments
!Dnet/sunrpc/sunrpc_syms.c
-->
!Enet/sunrpc/xdr.c
!Enet/sunrpc/svcsock.c
!Enet/sunrpc/sched.c
</sect1>
</chapter>
<chapter id="netdev">
<title>Network device support</title>
<sect1><title>Driver Support</title>
!Enet/core/dev.c
!Enet/ethernet/eth.c
!Enet/sched/sch_generic.c
!Iinclude/linux/etherdevice.h
!Iinclude/linux/netdevice.h
</sect1>
<sect1><title>PHY Support</title>
!Edrivers/net/phy/phy.c
!Idrivers/net/phy/phy.c
!Edrivers/net/phy/phy_device.c
!Idrivers/net/phy/phy_device.c
!Edrivers/net/phy/mdio_bus.c
!Idrivers/net/phy/mdio_bus.c
</sect1>
<!-- FIXME: Removed for now since no structured comments in source
<sect1><title>Wireless</title>
X!Enet/core/wireless.c
</sect1>
-->
<sect1><title>Synchronous PPP</title>
!Edrivers/net/wan/syncppp.c
</sect1>
</chapter>
<chapter id="modload">
<title>Module Support</title>
<sect1><title>Module Loading</title>
@ -371,7 +313,6 @@ X!Iinclude/linux/device.h
!Edrivers/base/class.c
!Edrivers/base/firmware_class.c
!Edrivers/base/transport_class.c
!Edrivers/base/dmapool.c
<!-- Cannot be included, because
attribute_container_add_class_device_adapter
and attribute_container_classdev_to_container
@ -508,11 +449,6 @@ X!Isound/sound_firmware.c
!Edrivers/serial/8250.c
</chapter>
<chapter id="z85230">
<title>Z85230 Support Library</title>
!Edrivers/net/wan/z85230.c
</chapter>
<chapter id="fbdev">
<title>Frame Buffer Library</title>
@ -712,24 +648,4 @@ X!Idrivers/video/console/fonts.c
!Edrivers/i2c/i2c-core.c
</chapter>
<chapter id="splice">
<title>splice API</title>
<para>
splice is a method for moving blocks of data around inside the
kernel, without continually transferring them between the kernel
and user space.
</para>
!Ffs/splice.c
</chapter>
<chapter id="pipes">
<title>pipes API</title>
<para>
Pipe interfaces are all for in-kernel (builtin image) use.
They are not exported for use by modules.
</para>
!Iinclude/linux/pipe_fs_i.h
!Ffs/pipe.c
</chapter>
</book>

32
Documentation/DocBook/kernel-locking.tmpl
View File

@ -717,7 +717,7 @@ used, and when it gets full, throws out the least used one.
<para>
For our first example, we assume that all operations are in user
context (ie. from system calls), so we can sleep. This means we can
use a semaphore to protect the cache and all the objects within
use a mutex to protect the cache and all the objects within
it. Here's the code:
</para>
@ -725,7 +725,7 @@ it. Here's the code:
#include &lt;linux/list.h&gt;
#include &lt;linux/slab.h&gt;
#include &lt;linux/string.h&gt;
#include &lt;asm/semaphore.h&gt;
#include &lt;linux/mutex.h&gt;
#include &lt;asm/errno.h&gt;
struct object
@ -737,7 +737,7 @@ struct object
};
/* Protects the cache, cache_num, and the objects within it */
static DECLARE_MUTEX(cache_lock);
static DEFINE_MUTEX(cache_lock);
static LIST_HEAD(cache);
static unsigned int cache_num = 0;
#define MAX_CACHE_SIZE 10
@ -789,17 +789,17 @@ int cache_add(int id, const char *name)
obj-&gt;id = id;
obj-&gt;popularity = 0;
down(&amp;cache_lock);
mutex_lock(&amp;cache_lock);
__cache_add(obj);
up(&amp;cache_lock);
mutex_unlock(&amp;cache_lock);
return 0;
}
void cache_delete(int id)
{
down(&amp;cache_lock);
mutex_lock(&amp;cache_lock);
__cache_delete(__cache_find(id));
up(&amp;cache_lock);
mutex_unlock(&amp;cache_lock);
}
int cache_find(int id, char *name)
@ -807,13 +807,13 @@ int cache_find(int id, char *name)
struct object *obj;
int ret = -ENOENT;
down(&amp;cache_lock);
mutex_lock(&amp;cache_lock);
obj = __cache_find(id);
if (obj) {
ret = 0;
strcpy(name, obj-&gt;name);
}
up(&amp;cache_lock);
mutex_unlock(&amp;cache_lock);
return ret;
}
</programlisting>
@ -853,7 +853,7 @@ The change is shown below, in standard patch format: the
int popularity;
};
-static DECLARE_MUTEX(cache_lock);
-static DEFINE_MUTEX(cache_lock);
+static spinlock_t cache_lock = SPIN_LOCK_UNLOCKED;
static LIST_HEAD(cache);
static unsigned int cache_num = 0;
@ -870,22 +870,22 @@ The change is shown below, in standard patch format: the
obj-&gt;id = id;
obj-&gt;popularity = 0;
- down(&amp;cache_lock);
- mutex_lock(&amp;cache_lock);
+ spin_lock_irqsave(&amp;cache_lock, flags);
__cache_add(obj);
- up(&amp;cache_lock);
- mutex_unlock(&amp;cache_lock);
+ spin_unlock_irqrestore(&amp;cache_lock, flags);
return 0;
}
void cache_delete(int id)
{
- down(&amp;cache_lock);
- mutex_lock(&amp;cache_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&amp;cache_lock, flags);
__cache_delete(__cache_find(id));
- up(&amp;cache_lock);
- mutex_unlock(&amp;cache_lock);
+ spin_unlock_irqrestore(&amp;cache_lock, flags);
}
@ -895,14 +895,14 @@ The change is shown below, in standard patch format: the
int ret = -ENOENT;
+ unsigned long flags;
- down(&amp;cache_lock);
- mutex_lock(&amp;cache_lock);
+ spin_lock_irqsave(&amp;cache_lock, flags);
obj = __cache_find(id);
if (obj) {
ret = 0;
strcpy(name, obj-&gt;name);
}
- up(&amp;cache_lock);
- mutex_unlock(&amp;cache_lock);
+ spin_unlock_irqrestore(&amp;cache_lock, flags);
return ret;
}

2
Documentation/DocBook/lsm.tmpl
View File

@ -33,7 +33,7 @@
</authorgroup>
</articleinfo>
<sect1><title>Introduction</title>
<sect1 id="Introduction"><title>Introduction</title>
<para>
In March 2001, the National Security Agency (NSA) gave a presentation

58
Documentation/DocBook/mtdnand.tmpl
View File

@ -80,7 +80,7 @@
struct member has a short description which is marked with an [XXX] identifier.
The following chapters explain the meaning of those identifiers.
</para>
<sect1>
<sect1 id="Function_identifiers_XXX">
<title>Function identifiers [XXX]</title>
<para>
The functions are marked with [XXX] identifiers in the short
@ -115,7 +115,7 @@
</para></listitem>
</itemizedlist>
</sect1>
<sect1>
<sect1 id="Struct_member_identifiers_XXX">
<title>Struct member identifiers [XXX]</title>
<para>
The struct members are marked with [XXX] identifiers in the
@ -159,7 +159,7 @@
basic functions and fill out some really board dependent
members in the nand chip description structure.
</para>
<sect1>
<sect1 id="Basic_defines">
<title>Basic defines</title>
<para>
At least you have to provide a mtd structure and
@ -185,7 +185,7 @@ static struct nand_chip board_chip;
static unsigned long baseaddr;
</programlisting>
</sect1>
<sect1>
<sect1 id="Partition_defines">
<title>Partition defines</title>
<para>
If you want to divide your device into partitions, then
@ -204,7 +204,7 @@ static struct mtd_partition partition_info[] = {
};
</programlisting>
</sect1>
<sect1>
<sect1 id="Hardware_control_functions">
<title>Hardware control function</title>
<para>
The hardware control function provides access to the
@ -246,7 +246,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
}
</programlisting>
</sect1>
<sect1>
<sect1 id="Device_ready_function">
<title>Device ready function</title>
<para>
If the hardware interface has the ready busy pin of the NAND chip connected to a
@ -257,7 +257,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
the function must not be defined and the function pointer this->dev_ready is set to NULL.
</para>
</sect1>
<sect1>
<sect1 id="Init_function">
<title>Init function</title>
<para>
The init function allocates memory and sets up all the board
@ -325,7 +325,7 @@ out:
module_init(board_init);
</programlisting>
</sect1>
<sect1>
<sect1 id="Exit_function">
<title>Exit function</title>
<para>
The exit function is only neccecary if the driver is
@ -359,7 +359,7 @@ module_exit(board_cleanup);
driver. For a list of functions which can be overridden by the board
driver see the documentation of the nand_chip structure.
</para>
<sect1>
<sect1 id="Multiple_chip_control">
<title>Multiple chip control</title>
<para>
The nand driver can control chip arrays. Therefor the
@ -419,9 +419,9 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
}
</programlisting>
</sect1>
<sect1>
<sect1 id="Hardware_ECC_support">
<title>Hardware ECC support</title>
<sect2>
<sect2 id="Functions_and_constants">
<title>Functions and constants</title>
<para>
The nand driver supports three different types of
@ -475,7 +475,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
</itemizedlist>
</para>
</sect2>
<sect2>
<sect2 id="Hardware_ECC_with_syndrome_calculation">
<title>Hardware ECC with syndrome calculation</title>
<para>
Many hardware ECC implementations provide Reed-Solomon
@ -500,7 +500,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
</para>
</sect2>
</sect1>
<sect1>
<sect1 id="Bad_Block_table_support">
<title>Bad block table support</title>
<para>
Most NAND chips mark the bad blocks at a defined
@ -552,7 +552,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
allows faster access than always checking the
bad block information on the flash chip itself.
</para>
<sect2>
<sect2 id="Flash_based_tables">
<title>Flash based tables</title>
<para>
It may be desired or neccecary to keep a bad block table in FLASH.
@ -587,7 +587,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
</itemizedlist>
</para>
</sect2>
<sect2>
<sect2 id="User_defined_tables">
<title>User defined tables</title>
<para>
User defined tables are created by filling out a
@ -676,7 +676,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
</para>
</sect2>
</sect1>
<sect1>
<sect1 id="Spare_area_placement">
<title>Spare area (auto)placement</title>
<para>
The nand driver implements different possibilities for
@ -730,7 +730,7 @@ struct nand_oobinfo {
</para></listitem>
</itemizedlist>
</para>
<sect2>
<sect2 id="Placement_defined_by_fs_driver">
<title>Placement defined by fs driver</title>
<para>
The calling function provides a pointer to a nand_oobinfo
@ -760,7 +760,7 @@ struct nand_oobinfo {
done according to the given scheme in the nand_oobinfo structure.
</para>
</sect2>
<sect2>
<sect2 id="Automatic_placement">
<title>Automatic placement</title>
<para>
Automatic placement uses the built in defaults to place the
@ -774,7 +774,7 @@ struct nand_oobinfo {
done according to the default builtin scheme.
</para>
</sect2>
<sect2>
<sect2 id="User_space_placement_selection">
<title>User space placement selection</title>
<para>
All non ecc functions like mtd->read and mtd->write use an internal
@ -789,9 +789,9 @@ struct nand_oobinfo {
</para>
</sect2>
</sect1>
<sect1>
<sect1 id="Spare_area_autoplacement_default">
<title>Spare area autoplacement default schemes</title>
<sect2>
<sect2 id="pagesize_256">
<title>256 byte pagesize</title>
<informaltable><tgroup cols="3"><tbody>
<row>
@ -843,7 +843,7 @@ pages this byte is reserved</entry>
</row>
</tbody></tgroup></informaltable>
</sect2>
<sect2>
<sect2 id="pagesize_512">
<title>512 byte pagesize</title>
<informaltable><tgroup cols="3"><tbody>
<row>
@ -906,7 +906,7 @@ in this page</entry>
</row>
</tbody></tgroup></informaltable>
</sect2>
<sect2>
<sect2 id="pagesize_2048">
<title>2048 byte pagesize</title>
<informaltable><tgroup cols="3"><tbody>
<row>
@ -1126,9 +1126,9 @@ in this page</entry>
<para>
This chapter describes the constants which might be relevant for a driver developer.
</para>
<sect1>
<sect1 id="Chip_option_constants">
<title>Chip option constants</title>
<sect2>
<sect2 id="Constants_for_chip_id_table">
<title>Constants for chip id table</title>
<para>
These constants are defined in nand.h. They are ored together to describe
@ -1153,7 +1153,7 @@ in this page</entry>
</programlisting>
</para>
</sect2>
<sect2>
<sect2 id="Constants_for_runtime_options">
<title>Constants for runtime options</title>
<para>
These constants are defined in nand.h. They are ored together to describe
@ -1171,7 +1171,7 @@ in this page</entry>
</sect2>
</sect1>
<sect1>
<sect1 id="EEC_selection_constants">
<title>ECC selection constants</title>
<para>
Use these constants to select the ECC algorithm.
@ -1192,7 +1192,7 @@ in this page</entry>
</para>
</sect1>
<sect1>
<sect1 id="Hardware_control_related_constants">
<title>Hardware control related constants</title>
<para>
These constants describe the requested hardware access function when
@ -1218,7 +1218,7 @@ in this page</entry>
</para>
</sect1>
<sect1>
<sect1 id="Bad_block_table_constants">
<title>Bad block table related constants</title>
<para>
These constants describe the options used for bad block

106
Documentation/DocBook/networking.tmpl Normal file
View File

@ -0,0 +1,106 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
<book id="LinuxNetworking">
<bookinfo>
<title>Linux Networking and Network Devices APIs</title>
<legalnotice>
<para>
This documentation is free software; you can redistribute
it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later
version.
</para>
<para>
This program is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
</para>
<para>
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA
</para>
<para>
For more details see the file COPYING in the source
distribution of Linux.
</para>
</legalnotice>
</bookinfo>
<toc></toc>
<chapter id="netcore">
<title>Linux Networking</title>
<sect1><title>Networking Base Types</title>
!Iinclude/linux/net.h
</sect1>
<sect1><title>Socket Buffer Functions</title>
!Iinclude/linux/skbuff.h
!Iinclude/net/sock.h
!Enet/socket.c
!Enet/core/skbuff.c
!Enet/core/sock.c
!Enet/core/datagram.c
!Enet/core/stream.c
</sect1>
<sect1><title>Socket Filter</title>
!Enet/core/filter.c
</sect1>
<sect1><title>Generic Network Statistics</title>
!Iinclude/linux/gen_stats.h
!Enet/core/gen_stats.c
!Enet/core/gen_estimator.c
</sect1>
<sect1><title>SUN RPC subsystem</title>
<!-- The !D functionality is not perfect, garbage has to be protected by comments
!Dnet/sunrpc/sunrpc_syms.c
-->
!Enet/sunrpc/xdr.c
!Enet/sunrpc/svc_xprt.c
!Enet/sunrpc/xprt.c
!Enet/sunrpc/sched.c
!Enet/sunrpc/socklib.c
!Enet/sunrpc/stats.c
!Enet/sunrpc/rpc_pipe.c
!Enet/sunrpc/rpcb_clnt.c
!Enet/sunrpc/clnt.c
</sect1>
</chapter>
<chapter id="netdev">
<title>Network device support</title>
<sect1><title>Driver Support</title>
!Enet/core/dev.c
!Enet/ethernet/eth.c
!Enet/sched/sch_generic.c
!Iinclude/linux/etherdevice.h
!Iinclude/linux/netdevice.h
</sect1>
<sect1><title>PHY Support</title>
!Edrivers/net/phy/phy.c
!Idrivers/net/phy/phy.c
!Edrivers/net/phy/phy_device.c
!Idrivers/net/phy/phy_device.c
!Edrivers/net/phy/mdio_bus.c
!Idrivers/net/phy/mdio_bus.c
</sect1>
<!-- FIXME: Removed for now since no structured comments in source
<sect1><title>Wireless</title>
X!Enet/core/wireless.c
</sect1>
-->
<sect1><title>Synchronous PPP</title>
!Edrivers/net/wan/syncppp.c
</sect1>
</chapter>
</book>

16
Documentation/DocBook/procfs-guide.tmpl
View File

@ -85,7 +85,7 @@
<preface>
<preface id="Preface">
<title>Preface</title>
<para>
@ -230,7 +230,7 @@
<sect1>
<sect1 id="Creating_a_symlink">
<title>Creating a symlink</title>
<funcsynopsis>
@ -254,7 +254,7 @@
</para>
</sect1>
<sect1>
<sect1 id="Creating_a_directory">
<title>Creating a directory</title>
<funcsynopsis>
@ -274,7 +274,7 @@
<sect1>
<sect1 id="Removing_an_entry">
<title>Removing an entry</title>
<funcsynopsis>
@ -340,7 +340,7 @@ entry->write_proc = write_proc_foo;
<sect1>
<sect1 id="Reading_data">
<title>Reading data</title>
<para>
@ -448,7 +448,7 @@ entry->write_proc = write_proc_foo;
<sect1>
<sect1 id="Writing_data">
<title>Writing data</title>
<para>
@ -579,7 +579,7 @@ int foo_read_func(char *page, char **start, off_t off,
<sect1>
<sect1 id="Modules">
<title>Modules</title>
<para>
@ -599,7 +599,7 @@ entry->owner = THIS_MODULE;
<sect1>
<sect1 id="Mode_and_ownership">
<title>Mode and ownership</title>
<para>

18
Documentation/DocBook/rapidio.tmpl
View File

@ -77,11 +77,11 @@
<chapter id="bugs">
<title>Known Bugs and Limitations</title>
<sect1>
<sect1 id="known_bugs">
<title>Bugs</title>
<para>None. ;)</para>
</sect1>
<sect1>
<sect1 id="Limitations">
<title>Limitations</title>
<para>
<orderedlist>
@ -100,7 +100,7 @@
on devices, request/map memory region resources,
and manage mailboxes/doorbells.
</para>
<sect1>
<sect1 id="Functions">
<title>Functions</title>
!Iinclude/linux/rio_drv.h
!Edrivers/rapidio/rio-driver.c
@ -116,23 +116,23 @@
subsystem.
</para>
<sect1><title>Structures</title>
<sect1 id="Structures"><title>Structures</title>
!Iinclude/linux/rio.h
</sect1>
<sect1><title>Enumeration and Discovery</title>
<sect1 id="Enumeration_and_Discovery"><title>Enumeration and Discovery</title>
!Idrivers/rapidio/rio-scan.c
</sect1>
<sect1><title>Driver functionality</title>
<sect1 id="Driver_functionality"><title>Driver functionality</title>
!Idrivers/rapidio/rio.c
!Idrivers/rapidio/rio-access.c
</sect1>
<sect1><title>Device model support</title>
<sect1 id="Device_model_support"><title>Device model support</title>
!Idrivers/rapidio/rio-driver.c
</sect1>
<sect1><title>Sysfs support</title>
<sect1 id="Sysfs_support"><title>Sysfs support</title>
!Idrivers/rapidio/rio-sysfs.c
</sect1>
<sect1><title>PPC32 support</title>
<sect1 id="PPC32_support"><title>PPC32 support</title>
!Iarch/powerpc/kernel/rio.c
!Earch/powerpc/sysdev/fsl_rio.c
!Iarch/powerpc/sysdev/fsl_rio.c

2
Documentation/DocBook/scsi.tmpl
View File

@ -12,7 +12,7 @@
<surname>Bottomley</surname>
<affiliation>
<address>
<email>James.Bottomley@steeleye.com</email>
<email>James.Bottomley@hansenpartnership.com</email>
</address>
</affiliation>
</author>

34
Documentation/DocBook/videobook.tmpl
View File

@ -170,7 +170,7 @@ int __init myradio_init(struct video_init *v)
<para>
The types available are
</para>
<table frame="all"><title>Device Types</title>
<table frame="all" id="Device_Types"><title>Device Types</title>
<tgroup cols="3" align="left">
<tbody>
<row>
@ -291,7 +291,7 @@ static int radio_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
allows the applications to find out what sort of a card they have found and
to figure out what they want to do about it. The fields in the structure are
</para>
<table frame="all"><title>struct video_capability fields</title>
<table frame="all" id="video_capability_fields"><title>struct video_capability fields</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -365,7 +365,7 @@ static int radio_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
<para>
The video_tuner structure has the following fields
</para>
<table frame="all"><title>struct video_tuner fields</title>
<table frame="all" id="video_tuner_fields"><title>struct video_tuner fields</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -398,7 +398,7 @@ static int radio_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
</tgroup>
</table>
<table frame="all"><title>struct video_tuner flags</title>
<table frame="all" id="video_tuner_flags"><title>struct video_tuner flags</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -421,7 +421,7 @@ static int radio_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
</tgroup>
</table>
<table frame="all"><title>struct video_tuner modes</title>
<table frame="all" id="video_tuner_modes"><title>struct video_tuner modes</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -572,7 +572,7 @@ static int current_volume=0;
<para>
Then we fill in the video_audio structure. This has the following format
</para>
<table frame="all"><title>struct video_audio fields</title>
<table frame="all" id="video_audio_fields"><title>struct video_audio fields</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -607,7 +607,7 @@ static int current_volume=0;
</tgroup>
</table>
<table frame="all"><title>struct video_audio flags</title>
<table frame="all" id="video_audio_flags"><title>struct video_audio flags</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -625,7 +625,7 @@ static int current_volume=0;
</tgroup>
</table>
<table frame="all"><title>struct video_audio modes</title>
<table frame="all" id="video_audio_modes"><title>struct video_audio modes</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -775,7 +775,7 @@ module_exit(cleanup);
</para>
</sect1>
</chapter>
<chapter>
<chapter id="Video_Capture_Devices">
<title>Video Capture Devices</title>
<sect1 id="introvid">
<title>Video Capture Device Types</title>
@ -855,7 +855,7 @@ static struct video_device my_camera
We use the extra video capability flags that did not apply to the
radio interface. The video related flags are
</para>
<table frame="all"><title>Capture Capabilities</title>
<table frame="all" id="Capture_Capabilities"><title>Capture Capabilities</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -1195,7 +1195,7 @@ static int camera_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
inputs to the video card). Our example card has a single camera input. The
fields in the structure are
</para>
<table frame="all"><title>struct video_channel fields</title>
<table frame="all" id="video_channel_fields"><title>struct video_channel fields</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -1218,7 +1218,7 @@ static int camera_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
</tbody>
</tgroup>
</table>
<table frame="all"><title>struct video_channel flags</title>
<table frame="all" id="video_channel_flags"><title>struct video_channel flags</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -1229,7 +1229,7 @@ static int camera_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
</tbody>
</tgroup>
</table>
<table frame="all"><title>struct video_channel types</title>
<table frame="all" id="video_channel_types"><title>struct video_channel types</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -1242,7 +1242,7 @@ static int camera_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
</tbody>
</tgroup>
</table>
<table frame="all"><title>struct video_channel norms</title>
<table frame="all" id="video_channel_norms"><title>struct video_channel norms</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -1328,7 +1328,7 @@ static int camera_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
for every other pixel in the image. The other common formats the interface
defines are
</para>
<table frame="all"><title>Framebuffer Encodings</title>
<table frame="all" id="Framebuffer_Encodings"><title>Framebuffer Encodings</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -1466,7 +1466,7 @@ static struct video_buffer capture_fb;
display. The video_window structure is used to describe the way the image
should be displayed.
</para>
<table frame="all"><title>struct video_window fields</title>
<table frame="all" id="video_window_fields"><title>struct video_window fields</title>
<tgroup cols="2" align="left">
<tbody>
<row>
@ -1503,7 +1503,7 @@ static struct video_buffer capture_fb;
<para>
Each clip is a struct video_clip which has the following fields
</para>
<table frame="all"><title>video_clip fields</title>
<table frame="all" id="video_clip_fields"><title>video_clip fields</title>
<tgroup cols="2" align="left">
<tbody>
<row>

12
Documentation/DocBook/z8530book.tmpl
View File

@ -77,7 +77,7 @@
</para>
</chapter>
<chapter>
<chapter id="Driver_Modes">
<title>Driver Modes</title>
<para>
The Z85230 driver layer can drive Z8530, Z85C30 and Z85230 devices
@ -108,7 +108,7 @@
</para>
</chapter>
<chapter>
<chapter id="Using_the_Z85230_driver">
<title>Using the Z85230 driver</title>
<para>
The Z85230 driver provides the back end interface to your board. To
@ -174,7 +174,7 @@
</para>
</chapter>
<chapter>
<chapter id="Attaching_Network_Interfaces">
<title>Attaching Network Interfaces</title>
<para>
If you wish to use the network interface facilities of the driver,
@ -216,7 +216,7 @@
</para>
</chapter>
<chapter>
<chapter id="Configuring_And_Activating_The_Port">
<title>Configuring And Activating The Port</title>
<para>
The Z85230 driver provides helper functions and tables to load the
@ -300,7 +300,7 @@
</para>
</chapter>
<chapter>
<chapter id="Network_Layer_Functions">
<title>Network Layer Functions</title>
<para>
The Z8530 layer provides functions to queue packets for
@ -327,7 +327,7 @@
</para>
</chapter>
<chapter>
<chapter id="Porting_The_Z8530_Driver">
<title>Porting The Z8530 Driver</title>
<para>
The Z8530 driver is written to be portable. In DMA mode it makes

2
Documentation/RCU/NMI-RCU.txt
View File

@ -25,7 +25,7 @@ the NMI handler to take the default machine-specific action.
This nmi_callback variable is a global function pointer to the current
NMI handler.
fastcall void do_nmi(struct pt_regs * regs, long error_code)
void do_nmi(struct pt_regs * regs, long error_code)
{
int cpu;

16
Documentation/SubmitChecklist
View File

@ -20,7 +20,11 @@ kernel patches.
4: ppc64 is a good architecture for cross-compilation checking because it
tends to use `unsigned long' for 64-bit quantities.
5: Matches kernel coding style(!)
5: Check your patch for general style as detailed in
Documentation/CodingStyle. Check for trivial violations with the
patch style checker prior to submission (scripts/checkpatch.pl).
You should be able to justify all violations that remain in
your patch.
6: Any new or modified CONFIG options don't muck up the config menu.
@ -79,13 +83,3 @@ kernel patches.
23: Tested after it has been merged into the -mm patchset to make sure
that it still works with all of the other queued patches and various
changes in the VM, VFS, and other subsystems.
24: Avoid whitespace damage such as indenting with spaces or whitespace
at the end of lines. You can test this by feeding the patch to
"git apply --check --whitespace=error-all"
25: Check your patch for general style as detailed in
Documentation/CodingStyle. Check for trivial violations with the
patch style checker prior to submission (scripts/checkpatch.pl).
You should be able to justify all violations that remain in
your patch.

6
Documentation/accounting/getdelays.c
View File

@ -168,7 +168,7 @@ int get_family_id(int sd)
char buf[256];
} ans;
int id, rc;
int id = 0, rc;
struct nlattr *na;
int rep_len;
@ -209,7 +209,7 @@ void print_delayacct(struct taskstats *t)
void task_context_switch_counts(struct taskstats *t)
{
printf("\n\nTask %15s%15s\n"
" %15lu%15lu\n",
" %15llu%15llu\n",
"voluntary", "nonvoluntary",
t->nvcsw, t->nivcsw);
}
@ -399,7 +399,7 @@ int main(int argc, char *argv[])
goto done;
}
PRINTF("nlmsghdr size=%d, nlmsg_len=%d, rep_len=%d\n",
PRINTF("nlmsghdr size=%zu, nlmsg_len=%d, rep_len=%d\n",
sizeof(struct nlmsghdr), msg.n.nlmsg_len, rep_len);

15
Documentation/acpi/dsdt-override.txt Normal file
View File

@ -0,0 +1,15 @@
Linux supports two methods of overriding the BIOS DSDT:
CONFIG_ACPI_CUSTOM_DSDT builds the image into the kernel.
CONFIG_ACPI_CUSTOM_DSDT_INITRD adds the image to the initrd.
When to use these methods is described in detail on the
Linux/ACPI home page:
http://www.lesswatts.org/projects/acpi/overridingDSDT.php
Note that if both options are used, the DSDT supplied
by the INITRD method takes precedence.
Documentation/initramfs-add-dsdt.sh is provided for convenience
for use with the CONFIG_ACPI_CUSTOM_DSDT_INITRD method.

43
Documentation/acpi/initramfs-add-dsdt.sh Executable file
View File

@ -0,0 +1,43 @@
#!/bin/bash
# Adds a DSDT file to the initrd (if it's an initramfs)
# first argument is the name of archive
# second argument is the name of the file to add
# The file will be copied as /DSDT.aml
# 20060126: fix "Premature end of file" with some old cpio (Roland Robic)
# 20060205: this time it should really work
# check the arguments
if [ $# -ne 2 ]; then
program_name=$(basename $0)
echo "\
$program_name: too few arguments
Usage: $program_name initrd-name.img DSDT-to-add.aml
Adds a DSDT file to an initrd (in initramfs format)
initrd-name.img: filename of the initrd in initramfs format
DSDT-to-add.aml: filename of the DSDT file to add
" 1>&2
exit 1
fi
# we should check it's an initramfs
tempcpio=$(mktemp -d)
# cleanup on exit, hangup, interrupt, quit, termination
trap 'rm -rf $tempcpio' 0 1 2 3 15
# extract the archive
gunzip -c "$1" > "$tempcpio"/initramfs.cpio || exit 1
# copy the DSDT file at the root of the directory so that we can call it "/DSDT.aml"
cp -f "$2" "$tempcpio"/DSDT.aml
# add the file
cd "$tempcpio"
(echo DSDT.aml | cpio --quiet -H newc -o -A -O "$tempcpio"/initramfs.cpio) || exit 1
cd "$OLDPWD"
# re-compress the archive
gzip -c "$tempcpio"/initramfs.cpio > "$1"

26
Documentation/acpi/method-tracing.txt Normal file
View File

@ -0,0 +1,26 @@
/sys/module/acpi/parameters/:
trace_method_name
The AML method name that the user wants to trace
trace_debug_layer
The temporary debug_layer used when tracing the method.
Using 0xffffffff by default if it is 0.
trace_debug_level
The temporary debug_level used when tracing the method.
Using 0x00ffffff by default if it is 0.
trace_state
The status of the tracing feature.
"enabled" means this feature is enabled
and the AML method is traced every time it's executed.
"1" means this feature is enabled and the AML method
will only be traced during the next execution.
"disabled" means this feature is disabled.
Users can enable/disable this debug tracing feature by
"echo string > /sys/module/acpi/parameters/trace_state".
"string" should be one of "enable", "disable" and "1".

2
Documentation/aoe/mkdevs.sh
View File

@ -29,6 +29,8 @@ rm -f $dir/interfaces
mknod -m 0200 $dir/interfaces c $MAJOR 4
rm -f $dir/revalidate
mknod -m 0200 $dir/revalidate c $MAJOR 5
rm -f $dir/flush
mknod -m 0200 $dir/flush c $MAJOR 6
export n_partitions
mkshelf=`echo $0 | sed 's!mkdevs!mkshelf!'`

5
Documentation/aoe/udev-install.sh
View File

@ -23,7 +23,10 @@ fi
# /etc/udev/rules.d
#
rules_d="`sed -n '/^udev_rules=/{ s!udev_rules=!!; s!\"!!g; p; }' $conf`"
if test -z "$rules_d" || test ! -d "$rules_d"; then
if test -z "$rules_d" ; then
rules_d=/etc/udev/rules.d
fi
if test ! -d "$rules_d"; then
echo "$me Error: cannot find udev rules directory" 1>&2
exit 1
fi

16
Documentation/aoe/udev.txt
View File

@ -1,6 +1,7 @@
# These rules tell udev what device nodes to create for aoe support.
# They may be installed along the following lines (adjusted to what
# you see on your system).
# They may be installed along the following lines. Check the section
# 8 udev manpage to see whether your udev supports SUBSYSTEM, and
# whether it uses one or two equal signs for SUBSYSTEM and KERNEL.
#
# ecashin@makki ~$ su
# Password:
@ -15,10 +16,11 @@
#
# aoe char devices
SUBSYSTEM="aoe", KERNEL="discover", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM="aoe", KERNEL="err", NAME="etherd/%k", GROUP="disk", MODE="0440"
SUBSYSTEM="aoe", KERNEL="interfaces", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM="aoe", KERNEL="revalidate", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM=="aoe", KERNEL=="discover", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM=="aoe", KERNEL=="err", NAME="etherd/%k", GROUP="disk", MODE="0440"
SUBSYSTEM=="aoe", KERNEL=="interfaces", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM=="aoe", KERNEL=="revalidate", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM=="aoe", KERNEL=="flush", NAME="etherd/%k", GROUP="disk", MODE="0220"
# aoe block devices
KERNEL="etherd*", NAME="%k", GROUP="disk"
KERNEL=="etherd*", NAME="%k", GROUP="disk"

22
Documentation/cgroups.txt
View File

@ -456,7 +456,7 @@ methods are create/destroy. Any others that are null are presumed to
be successful no-ops.
struct cgroup_subsys_state *create(struct cgroup *cont)
LL=cgroup_mutex
(cgroup_mutex held by caller)
Called to create a subsystem state object for a cgroup. The
subsystem should allocate its subsystem state object for the passed
@ -471,14 +471,19 @@ it's the root of the hierarchy) and may be an appropriate place for
initialization code.
void destroy(struct cgroup *cont)
LL=cgroup_mutex
(cgroup_mutex held by caller)
The cgroup system is about to destroy the passed cgroup; the
subsystem should do any necessary cleanup
The cgroup system is about to destroy the passed cgroup; the subsystem
should do any necessary cleanup and free its subsystem state
object. By the time this method is called, the cgroup has already been
unlinked from the file system and from the child list of its parent;
cgroup->parent is still valid. (Note - can also be called for a
newly-created cgroup if an error occurs after this subsystem's
create() method has been called for the new cgroup).
int can_attach(struct cgroup_subsys *ss, struct cgroup *cont,
struct task_struct *task)
LL=cgroup_mutex
(cgroup_mutex held by caller)
Called prior to moving a task into a cgroup; if the subsystem
returns an error, this will abort the attach operation. If a NULL
@ -489,25 +494,20 @@ remain valid while the caller holds cgroup_mutex.
void attach(struct cgroup_subsys *ss, struct cgroup *cont,
struct cgroup *old_cont, struct task_struct *task)
LL=cgroup_mutex
Called after the task has been attached to the cgroup, to allow any
post-attachment activity that requires memory allocations or blocking.
void fork(struct cgroup_subsy *ss, struct task_struct *task)
LL=callback_mutex, maybe read_lock(tasklist_lock)
Called when a task is forked into a cgroup. Also called during
registration for all existing tasks.
void exit(struct cgroup_subsys *ss, struct task_struct *task)
LL=callback_mutex
Called during task exit
int populate(struct cgroup_subsys *ss, struct cgroup *cont)
LL=none
Called after creation of a cgroup to allow a subsystem to populate
the cgroup directory with file entries. The subsystem should make
@ -524,7 +524,7 @@ example in cpusets, no task may attach before 'cpus' and 'mems' are set
up.
void bind(struct cgroup_subsys *ss, struct cgroup *root)
LL=callback_mutex
(cgroup_mutex held by caller)
Called when a cgroup subsystem is rebound to a different hierarchy
and root cgroup. Currently this will only involve movement between

279
Documentation/controllers/memory.txt Normal file
View File

@ -0,0 +1,279 @@
Memory Controller
Salient features
a. Enable control of both RSS (mapped) and Page Cache (unmapped) pages
b. The infrastructure allows easy addition of other types of memory to control
c. Provides *zero overhead* for non memory controller users
d. Provides a double LRU: global memory pressure causes reclaim from the
global LRU; a cgroup on hitting a limit, reclaims from the per
cgroup LRU
NOTE: Swap Cache (unmapped) is not accounted now.
Benefits and Purpose of the memory controller
The memory controller isolates the memory behaviour of a group of tasks
from the rest of the system. The article on LWN [12] mentions some probable
uses of the memory controller. The memory controller can be used to
a. Isolate an application or a group of applications
Memory hungry applications can be isolated and limited to a smaller
amount of memory.
b. Create a cgroup with limited amount of memory, this can be used
as a good alternative to booting with mem=XXXX.
c. Virtualization solutions can control the amount of memory they want
to assign to a virtual machine instance.
d. A CD/DVD burner could control the amount of memory used by the
rest of the system to ensure that burning does not fail due to lack
of available memory.
e. There are several other use cases, find one or use the controller just
for fun (to learn and hack on the VM subsystem).
1. History
The memory controller has a long history. A request for comments for the memory
controller was posted by Balbir Singh [1]. At the time the RFC was posted
there were several implementations for memory control. The goal of the
RFC was to build consensus and agreement for the minimal features required
for memory control. The first RSS controller was posted by Balbir Singh[2]
in Feb 2007. Pavel Emelianov [3][4][5] has since posted three versions of the
RSS controller. At OLS, at the resource management BoF, everyone suggested
that we handle both page cache and RSS together. Another request was raised
to allow user space handling of OOM. The current memory controller is
at version 6; it combines both mapped (RSS) and unmapped Page
Cache Control [11].
2. Memory Control
Memory is a unique resource in the sense that it is present in a limited
amount. If a task requires a lot of CPU processing, the task can spread
its processing over a period of hours, days, months or years, but with
memory, the same physical memory needs to be reused to accomplish the task.
The memory controller implementation has been divided into phases. These
are:
1. Memory controller
2. mlock(2) controller
3. Kernel user memory accounting and slab control
4. user mappings length controller
The memory controller is the first controller developed.
2.1. Design
The core of the design is a counter called the res_counter. The res_counter
tracks the current memory usage and limit of the group of processes associated
with the controller. Each cgroup has a memory controller specific data
structure (mem_cgroup) associated with it.
2.2. Accounting
+--------------------+
| mem_cgroup |
| (res_counter) |
+--------------------+
/ ^ \
/ | \
+---------------+ | +---------------+
| mm_struct | |.... | mm_struct |
| | | | |
+---------------+ | +---------------+
|
+ --------------+
|
+---------------+ +------+--------+
| page +----------> page_cgroup|
| | | |
+---------------+ +---------------+
(Figure 1: Hierarchy of Accounting)
Figure 1 shows the important aspects of the controller
1. Accounting happens per cgroup
2. Each mm_struct knows about which cgroup it belongs to
3. Each page has a pointer to the page_cgroup, which in turn knows the
cgroup it belongs to
The accounting is done as follows: mem_cgroup_charge() is invoked to setup
the necessary data structures and check if the cgroup that is being charged
is over its limit. If it is then reclaim is invoked on the cgroup.
More details can be found in the reclaim section of this document.
If everything goes well, a page meta-data-structure called page_cgroup is
allocated and associated with the page. This routine also adds the page to
the per cgroup LRU.
2.2.1 Accounting details
All mapped pages (RSS) and unmapped user pages (Page Cache) are accounted.
RSS pages are accounted at the time of page_add_*_rmap() unless they've already
been accounted for earlier. A file page will be accounted for as Page Cache;
it's mapped into the page tables of a process, duplicate accounting is carefully
avoided. Page Cache pages are accounted at the time of add_to_page_cache().
The corresponding routines that remove a page from the page tables or removes
a page from Page Cache is used to decrement the accounting counters of the
cgroup.
2.3 Shared Page Accounting
Shared pages are accounted on the basis of the first touch approach. The
cgroup that first touches a page is accounted for the page. The principle
behind this approach is that a cgroup that aggressively uses a shared
page will eventually get charged for it (once it is uncharged from
the cgroup that brought it in -- this will happen on memory pressure).
2.4 Reclaim
Each cgroup maintains a per cgroup LRU that consists of an active
and inactive list. When a cgroup goes over its limit, we first try
to reclaim memory from the cgroup so as to make space for the new
pages that the cgroup has touched. If the reclaim is unsuccessful,
an OOM routine is invoked to select and kill the bulkiest task in the
cgroup.
The reclaim algorithm has not been modified for cgroups, except that
pages that are selected for reclaiming come from the per cgroup LRU
list.
2. Locking
The memory controller uses the following hierarchy
1. zone->lru_lock is used for selecting pages to be isolated
2. mem->per_zone->lru_lock protects the per cgroup LRU (per zone)
3. lock_page_cgroup() is used to protect page->page_cgroup
3. User Interface
0. Configuration
a. Enable CONFIG_CGROUPS
b. Enable CONFIG_RESOURCE_COUNTERS
c. Enable CONFIG_CGROUP_MEM_CONT
1. Prepare the cgroups
# mkdir -p /cgroups
# mount -t cgroup none /cgroups -o memory
2. Make the new group and move bash into it
# mkdir /cgroups/0
# echo $$ > /cgroups/0/tasks
Since now we're in the 0 cgroup,
We can alter the memory limit:
# echo -n 4M > /cgroups/0/memory.limit_in_bytes
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
mega or gigabytes.
# cat /cgroups/0/memory.limit_in_bytes
4194304 Bytes
NOTE: The interface has now changed to display the usage in bytes
instead of pages
We can check the usage:
# cat /cgroups/0/memory.usage_in_bytes
1216512 Bytes
A successful write to this file does not guarantee a successful set of
this limit to the value written into the file. This can be due to a
number of factors, such as rounding up to page boundaries or the total
availability of memory on the system. The user is required to re-read
this file after a write to guarantee the value committed by the kernel.
# echo -n 1 > memory.limit_in_bytes
# cat memory.limit_in_bytes
4096 Bytes
The memory.failcnt field gives the number of times that the cgroup limit was
exceeded.
The memory.stat file gives accounting information. Now, the number of
caches, RSS and Active pages/Inactive pages are shown.
The memory.force_empty gives an interface to drop *all* charges by force.
# echo -n 1 > memory.force_empty
will drop all charges in cgroup. Currently, this is maintained for test.
4. Testing
Balbir posted lmbench, AIM9, LTP and vmmstress results [10] and [11].
Apart from that v6 has been tested with several applications and regular
daily use. The controller has also been tested on the PPC64, x86_64 and
UML platforms.
4.1 Troubleshooting
Sometimes a user might find that the application under a cgroup is
terminated. There are several causes for this:
1. The cgroup limit is too low (just too low to do anything useful)
2. The user is using anonymous memory and swap is turned off or too low
A sync followed by echo 1 > /proc/sys/vm/drop_caches will help get rid of
some of the pages cached in the cgroup (page cache pages).
4.2 Task migration
When a task migrates from one cgroup to another, it's charge is not
carried forward. The pages allocated from the original cgroup still
remain charged to it, the charge is dropped when the page is freed or
reclaimed.
4.3 Removing a cgroup
A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a
cgroup might have some charge associated with it, even though all
tasks have migrated away from it. Such charges are automatically dropped at
rmdir() if there are no tasks.
4.4 Choosing what to account -- Page Cache (unmapped) vs RSS (mapped)?
The type of memory accounted by the cgroup can be limited to just
mapped pages by writing "1" to memory.control_type field
echo -n 1 > memory.control_type
5. TODO
1. Add support for accounting huge pages (as a separate controller)
2. Make per-cgroup scanner reclaim not-shared pages first
3. Teach controller to account for shared-pages
4. Start reclamation when the limit is lowered
5. Start reclamation in the background when the limit is
not yet hit but the usage is getting closer
Summary
Overall, the memory controller has been a stable controller and has been
commented and discussed quite extensively in the community.
References
1. Singh, Balbir. RFC: Memory Controller, http://lwn.net/Articles/206697/
2. Singh, Balbir. Memory Controller (RSS Control),
http://lwn.net/Articles/222762/
3. Emelianov, Pavel. Resource controllers based on process cgroups
http://lkml.org/lkml/2007/3/6/198
4. Emelianov, Pavel. RSS controller based on process cgroups (v2)
http://lkml.org/lkml/2007/4/9/74
5. Emelianov, Pavel. RSS controller based on process cgroups (v3)
http://lkml.org/lkml/2007/5/30/244
6. Menage, Paul. Control Groups v10, http://lwn.net/Articles/236032/
7. Vaidyanathan, Srinivasan, Control Groups: Pagecache accounting and control
subsystem (v3), http://lwn.net/Articles/235534/
8. Singh, Balbir. RSS controller V2 test results (lmbench),
http://lkml.org/lkml/2007/5/17/232
9. Singh, Balbir. RSS controller V2 AIM9 results
http://lkml.org/lkml/2007/5/18/1
10. Singh, Balbir. Memory controller v6 results,
http://lkml.org/lkml/2007/8/19/36
11. Singh, Balbir. Memory controller v6, http://lkml.org/lkml/2007/8/17/69
12. Corbet, Jonathan, Controlling memory use in cgroups,
http://lwn.net/Articles/243795/

23
Documentation/cpuidle/core.txt Normal file
View File

@ -0,0 +1,23 @@
Supporting multiple CPU idle levels in kernel
cpuidle
General Information:
Various CPUs today support multiple idle levels that are differentiated
by varying exit latencies and power consumption during idle.
cpuidle is a generic in-kernel infrastructure that separates
idle policy (governor) from idle mechanism (driver) and provides a
standardized infrastructure to support independent development of
governors and drivers.
cpuidle resides under drivers/cpuidle.
Boot options:
"cpuidle_sysfs_switch"
enables current_governor interface in /sys/devices/system/cpu/cpuidle/,
which can be used to switch governors at run time. This boot option
is meant for developer testing only. In normal usage, kernel picks the
best governor based on governor ratings.
SEE ALSO: sysfs.txt in this directory.

31
Documentation/cpuidle/driver.txt Normal file
View File

@ -0,0 +1,31 @@
Supporting multiple CPU idle levels in kernel
cpuidle drivers
cpuidle driver hooks into the cpuidle infrastructure and handles the
architecture/platform dependent part of CPU idle states. Driver
provides the platform idle state detection capability and also
has mechanisms in place to support actual entry-exit into CPU idle states.
cpuidle driver initializes the cpuidle_device structure for each CPU device
and registers with cpuidle using cpuidle_register_device.
It can also support the dynamic changes (like battery <-> AC), by using
cpuidle_pause_and_lock, cpuidle_disable_device and cpuidle_enable_device,
cpuidle_resume_and_unlock.
Interfaces:
extern int cpuidle_register_driver(struct cpuidle_driver *drv);
extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
extern int cpuidle_register_device(struct cpuidle_device *dev);
extern void cpuidle_unregister_device(struct cpuidle_device *dev);
extern void cpuidle_pause_and_lock(void);
extern void cpuidle_resume_and_unlock(void);
extern int cpuidle_enable_device(struct cpuidle_device *dev);
extern void cpuidle_disable_device(struct cpuidle_device *dev);

29
Documentation/cpuidle/governor.txt Normal file
View File

@ -0,0 +1,29 @@
Supporting multiple CPU idle levels in kernel
cpuidle governors
cpuidle governor is policy routine that decides what idle state to enter at
any given time. cpuidle core uses different callbacks to the governor.
* enable() to enable governor for a particular device
* disable() to disable governor for a particular device
* select() to select an idle state to enter
* reflect() called after returning from the idle state, which can be used
by the governor for some record keeping.
More than one governor can be registered at the same time and
users can switch between drivers using /sysfs interface (when enabled).
More than one governor part is supported for developers to easily experiment
with different governors. By default, most optimal governor based on your
kernel configuration and platform will be selected by cpuidle.
Interfaces:
extern int cpuidle_register_governor(struct cpuidle_governor *gov);
extern void cpuidle_unregister_governor(struct cpuidle_governor *gov);
struct cpuidle_governor

79
Documentation/cpuidle/sysfs.txt Normal file
View File

@ -0,0 +1,79 @@
Supporting multiple CPU idle levels in kernel
cpuidle sysfs
System global cpuidle related information and tunables are under
/sys/devices/system/cpu/cpuidle
The current interfaces in this directory has self-explanatory names:
* current_driver
* current_governor_ro
With cpuidle_sysfs_switch boot option (meant for developer testing)
following objects are visible instead.
* current_driver
* available_governors
* current_governor
In this case users can switch the governor at run time by writing
to current_governor.
Per logical CPU specific cpuidle information are under
/sys/devices/system/cpu/cpuX/cpuidle
for each online cpu X
--------------------------------------------------------------------------------
# ls -lR /sys/devices/system/cpu/cpu0/cpuidle/
/sys/devices/system/cpu/cpu0/cpuidle/:
total 0
drwxr-xr-x 2 root root 0 Feb 8 10:42 state0
drwxr-xr-x 2 root root 0 Feb 8 10:42 state1
drwxr-xr-x 2 root root 0 Feb 8 10:42 state2
drwxr-xr-x 2 root root 0 Feb 8 10:42 state3
/sys/devices/system/cpu/cpu0/cpuidle/state0:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
/sys/devices/system/cpu/cpu0/cpuidle/state1:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
/sys/devices/system/cpu/cpu0/cpuidle/state2:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
/sys/devices/system/cpu/cpu0/cpuidle/state3:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
--------------------------------------------------------------------------------
* desc : Small description about the idle state (string)
* latency : Latency to exit out of this idle state (in microseconds)
* name : Name of the idle state (string)
* power : Power consumed while in this idle state (in milliwatts)
* time : Total time spent in this idle state (in microseconds)
* usage : Number of times this state was entered (count)

23
Documentation/cpusets.txt
View File

@ -523,21 +523,14 @@ from one cpuset to another, then the kernel will adjust the tasks
memory placement, as above, the next time that the kernel attempts
to allocate a page of memory for that task.
If a cpuset has its CPUs modified, then each task using that
cpuset does _not_ change its behavior automatically. In order to
minimize the impact on the critical scheduling code in the kernel,
tasks will continue to use their prior CPU placement until they
are rebound to their cpuset, by rewriting their pid to the 'tasks'
file of their cpuset. If a task had been bound to some subset of its
cpuset using the sched_setaffinity() call, and if any of that subset
is still allowed in its new cpuset settings, then the task will be
restricted to the intersection of the CPUs it was allowed on before,
and its new cpuset CPU placement. If, on the other hand, there is
no overlap between a tasks prior placement and its new cpuset CPU
placement, then the task will be allowed to run on any CPU allowed
in its new cpuset. If a task is moved from one cpuset to another,
its CPU placement is updated in the same way as if the tasks pid is
rewritten to the 'tasks' file of its current cpuset.
If a cpuset has its 'cpus' modified, then each task in that cpuset
will have its allowed CPU placement changed immediately. Similarly,
if a tasks pid is written to a cpusets 'tasks' file, in either its
current cpuset or another cpuset, then its allowed CPU placement is
changed immediately. If such a task had been bound to some subset
of its cpuset using the sched_setaffinity() call, the task will be
allowed to run on any CPU allowed in its new cpuset, negating the
affect of the prior sched_setaffinity() call.
In summary, the memory placement of a task whose cpuset is changed is
updated by the kernel, on the next allocation of a page for that task,

0
Documentation/drivers/edac/edac.txt → Documentation/edac.txt
View File

1
Documentation/email-clients.txt
View File

@ -170,7 +170,6 @@ Sylpheed (GUI)
- Works well for inlining text (or using attachments).
- Allows use of an external editor.
- Not good for IMAP.
- Is slow on large folders.
- Won't do TLS SMTP auth over a non-SSL connection.
- Has a helpful ruler bar in the compose window.

6
Documentation/fb/deferred_io.txt
View File

@ -7,10 +7,10 @@ IO. The following example may be a useful explanation of how one such setup
works:
- userspace app like Xfbdev mmaps framebuffer
- deferred IO and driver sets up nopage and page_mkwrite handlers
- deferred IO and driver sets up fault and page_mkwrite handlers
- userspace app tries to write to mmaped vaddress
- we get pagefault and reach nopage handler
- nopage handler finds and returns physical page
- we get pagefault and reach fault handler
- fault handler finds and returns physical page
- we get page_mkwrite where we add this page to a list
- schedule a workqueue task to be run after a delay
- app continues writing to that page with no additional cost. this is

54
Documentation/feature-removal-schedule.txt
View File

@ -6,14 +6,6 @@ be removed from this file.
---------------------------
What: MXSER
When: December 2007
Why: Old mxser driver is obsoleted by the mxser_new. Give it some time yet
and remove it.
Who: Jiri Slaby <jirislaby@gmail.com>
---------------------------
What: dev->power.power_state
When: July 2007
Why: Broken design for runtime control over driver power states, confusing
@ -107,17 +99,6 @@ Who: Eric Biederman <ebiederm@xmission.com>
---------------------------
What: a.out interpreter support for ELF executables
When: 2.6.25
Files: fs/binfmt_elf.c
Why: Using a.out interpreters for ELF executables was a feature for
transition from a.out to ELF. But now it is unlikely to be still
needed anymore and removing it would simplify the hairy ELF
loader code.
Who: Andi Kleen <ak@suse.de>
---------------------------
What: remove EXPORT_SYMBOL(kernel_thread)
When: August 2006
Files: arch/*/kernel/*_ksyms.c
@ -130,15 +111,6 @@ Who: Christoph Hellwig <hch@lst.de>
---------------------------
What: CONFIG_FORCED_INLINING
When: June 2006
Why: Config option is there to see if gcc is good enough. (in january
2006). If it is, the behavior should just be the default. If it's not,
the option should just go away entirely.
Who: Arjan van de Ven
---------------------------
What: eepro100 network driver
When: January 2007
Why: replaced by the e100 driver
@ -200,21 +172,6 @@ Who: Len Brown <len.brown@intel.com>
---------------------------
What: 'time' kernel boot parameter
When: January 2008
Why: replaced by 'printk.time=<value>' so that printk timestamps can be
enabled or disabled as needed
Who: Randy Dunlap <randy.dunlap@oracle.com>
---------------------------
What: drivers depending on OSS_OBSOLETE
When: options in 2.6.23, code in 2.6.25
Why: obsolete OSS drivers
Who: Adrian Bunk <bunk@stusta.de>
---------------------------
What: libata spindown skipping and warning
When: Dec 2008
Why: Some halt(8) implementations synchronize caches for and spin
@ -338,3 +295,14 @@ Why: The support code for the old firmware hurts code readability/maintainabilit
and slightly hurts runtime performance. Bugfixes for the old firmware
are not provided by Broadcom anymore.
Who: Michael Buesch <mb@bu3sch.de>
---------------------------
What: Solaris/SunOS syscall and binary support on Sparc
When: 2.6.26
Why: Largely unmaintained and almost entirely unused. File system
layering used to divert library and dynamic linker searches to
/usr/gnemul is extremely buggy and unfixable. Making it work
is largely pointless as without a lot of work only the most
trivial of Solaris binaries can work with the emulation code.
Who: David S. Miller <davem@davemloft.net>

4
Documentation/filesystems/00-INDEX
View File

@ -32,6 +32,8 @@ directory-locking
- info about the locking scheme used for directory operations.
dlmfs.txt
- info on the userspace interface to the OCFS2 DLM.
dnotify.txt
- info about directory notification in Linux.
ecryptfs.txt
- docs on eCryptfs: stacked cryptographic filesystem for Linux.
ext2.txt
@ -80,6 +82,8 @@ relay.txt
- info on relay, for efficient streaming from kernel to user space.
romfs.txt
- description of the ROMFS filesystem.
sharedsubtree.txt
- a description of shared subtrees for namespaces.
smbfs.txt
- info on using filesystems with the SMB protocol (Win 3.11 and NT).
spufs.txt

3
Documentation/filesystems/Locking
View File

@ -90,7 +90,6 @@ of the locking scheme for directory operations.
prototypes:
struct inode *(*alloc_inode)(struct super_block *sb);
void (*destroy_inode)(struct inode *);
void (*read_inode) (struct inode *);
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, int);
void (*put_inode) (struct inode *);
@ -114,7 +113,6 @@ locking rules:
BKL s_lock s_umount
alloc_inode: no no no
destroy_inode: no
read_inode: no (see below)
dirty_inode: no (must not sleep)
write_inode: no
put_inode: no
@ -133,7 +131,6 @@ show_options: no (vfsmount->sem)
quota_read: no no no (see below)
quota_write: no no no (see below)
->read_inode() is not a method - it's a callback used in iget().
->remount_fs() will have the s_umount lock if it's already mounted.
When called from get_sb_single, it does NOT have the s_umount lock.
->quota_read() and ->quota_write() functions are both guaranteed to

10
Documentation/dnotify.txt → Documentation/filesystems/dnotify.txt
View File

@ -69,24 +69,24 @@ Example
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
static volatile int event_fd;
static void handler(int sig, siginfo_t *si, void *data)
{
event_fd = si->si_fd;
}
int main(void)
{
struct sigaction act;
int fd;
act.sa_sigaction = handler;
sigemptyset(&act.sa_mask);
act.sa_flags = SA_SIGINFO;
sigaction(SIGRTMIN + 1, &act, NULL);
fd = open(".", O_RDONLY);
fcntl(fd, F_SETSIG, SIGRTMIN + 1);
fcntl(fd, F_NOTIFY, DN_MODIFY|DN_CREATE|DN_MULTISHOT);

1
Documentation/filesystems/isofs.txt
View File

@ -24,6 +24,7 @@ Mount options unique to the isofs filesystem.
map=normal Map non-Rock Ridge filenames to lower case
map=acorn As map=normal but also apply Acorn extensions if present
mode=xxx Sets the permissions on files to xxx
dmode=xxx Sets the permissions on directories to xxx
nojoliet Ignore Joliet extensions if they are present.
norock Ignore Rock Ridge extensions if they are present.
hide Completely strip hidden files from the file system.

30
Documentation/filesystems/porting
View File

@ -34,8 +34,8 @@ FOO_I(inode) (see in-tree filesystems for examples).
Make them ->alloc_inode and ->destroy_inode in your super_operations.
Keep in mind that now you need explicit initialization of private data -
typically in ->read_inode() and after getting an inode from new_inode().
Keep in mind that now you need explicit initialization of private data
typically between calling iget_locked() and unlocking the inode.
At some point that will become mandatory.
@ -173,10 +173,10 @@ should be a non-blocking function that initializes those parts of a
newly created inode to allow the test function to succeed. 'data' is
passed as an opaque value to both test and set functions.
When the inode has been created by iget5_locked(), it will be returned with
the I_NEW flag set and will still be locked. read_inode has not been
called so the file system still has to finalize the initialization. Once
the inode is initialized it must be unlocked by calling unlock_new_inode().
When the inode has been created by iget5_locked(), it will be returned with the
I_NEW flag set and will still be locked. The filesystem then needs to finalize
the initialization. Once the inode is initialized it must be unlocked by
calling unlock_new_inode().
The filesystem is responsible for setting (and possibly testing) i_ino
when appropriate. There is also a simpler iget_locked function that
@ -184,11 +184,19 @@ just takes the superblock and inode number as arguments and does the
test and set for you.
e.g.
inode = iget_locked(sb, ino);
if (inode->i_state & I_NEW) {
read_inode_from_disk(inode);
unlock_new_inode(inode);
}
inode = iget_locked(sb, ino);
if (inode->i_state & I_NEW) {
err = read_inode_from_disk(inode);
if (err < 0) {
iget_failed(inode);
return err;
}
unlock_new_inode(inode);
}
Note that if the process of setting up a new inode fails, then iget_failed()
should be called on the inode to render it dead, and an appropriate error
should be passed back to the caller.
---
[recommended]

8
Documentation/filesystems/proc.txt
View File

@ -1029,6 +1029,14 @@ nr_inodes
Denotes the number of inodes the system has allocated. This number will
grow and shrink dynamically.
nr_open
-------
Denotes the maximum number of file-handles a process can
allocate. Default value is 1024*1024 (1048576) which should be
enough for most machines. Actual limit depends on RLIMIT_NOFILE
resource limit.
nr_free_inodes
--------------

0
Documentation/sharedsubtree.txt → Documentation/filesystems/sharedsubtree.txt
View File

67
Documentation/filesystems/vfs.txt
View File

@ -151,7 +151,7 @@ The get_sb() method has the following arguments:
const char *dev_name: the device name we are mounting.
void *data: arbitrary mount options, usually comes as an ASCII
string
string (see "Mount Options" section)
struct vfsmount *mnt: a vfs-internal representation of a mount point
@ -182,7 +182,7 @@ A fill_super() method implementation has the following arguments:
must initialize this properly.
void *data: arbitrary mount options, usually comes as an ASCII
string
string (see "Mount Options" section)
int silent: whether or not to be silent on error
@ -203,8 +203,6 @@ struct super_operations {
struct inode *(*alloc_inode)(struct super_block *sb);
void (*destroy_inode)(struct inode *);
void (*read_inode) (struct inode *);
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, int);
void (*put_inode) (struct inode *);
@ -242,15 +240,6 @@ or bottom half).
->alloc_inode was defined and simply undoes anything done by
->alloc_inode.
read_inode: this method is called to read a specific inode from the
mounted filesystem. The i_ino member in the struct inode is
initialized by the VFS to indicate which inode to read. Other
members are filled in by this method.
You can set this to NULL and use iget5_locked() instead of iget()
to read inodes. This is necessary for filesystems for which the
inode number is not sufficient to identify an inode.
dirty_inode: this method is called by the VFS to mark an inode dirty.
write_inode: this method is called when the VFS needs to write an
@ -302,15 +291,16 @@ or bottom half).
umount_begin: called when the VFS is unmounting a filesystem.
show_options: called by the VFS to show mount options for /proc/<pid>/mounts.
show_options: called by the VFS to show mount options for
/proc/<pid>/mounts. (see "Mount Options" section)
quota_read: called by the VFS to read from filesystem quota file.
quota_write: called by the VFS to write to filesystem quota file.
The read_inode() method is responsible for filling in the "i_op"
field. This is a pointer to a "struct inode_operations" which
describes the methods that can be performed on individual inodes.
Whoever sets up the inode is responsible for filling in the "i_op" field. This
is a pointer to a "struct inode_operations" which describes the methods that
can be performed on individual inodes.
The Inode Object
@ -980,6 +970,49 @@ manipulate dentries:
For further information on dentry locking, please refer to the document
Documentation/filesystems/dentry-locking.txt.
Mount Options
=============
Parsing options
---------------
On mount and remount the filesystem is passed a string containing a
comma separated list of mount options. The options can have either of
these forms:
option
option=value
The <linux/parser.h> header defines an API that helps parse these
options. There are plenty of examples on how to use it in existing
filesystems.
Showing options
---------------
If a filesystem accepts mount options, it must define show_options()
to show all the currently active options. The rules are:
- options MUST be shown which are not default or their values differ
from the default
- options MAY be shown which are enabled by default or have their
default value
Options used only internally between a mount helper and the kernel
(such as file descriptors), or which only have an effect during the
mounting (such as ones controlling the creation of a journal) are exempt
from the above rules.
The underlying reason for the above rules is to make sure, that a
mount can be accurately replicated (e.g. umounting and mounting again)
based on the information found in /proc/mounts.
A simple method of saving options at mount/remount time and showing
them is provided with the save_mount_options() and
generic_show_options() helper functions. Please note, that using
these may have drawbacks. For more info see header comments for these
functions in fs/namespace.c.
Resources
=========

36
Documentation/hwmon/ads7828 Normal file
View File

@ -0,0 +1,36 @@
Kernel driver ads7828
=====================
Supported chips:
* Texas Instruments/Burr-Brown ADS7828
Prefix: 'ads7828'
Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4b
Datasheet: Publicly available at the Texas Instruments website :
http://focus.ti.com/lit/ds/symlink/ads7828.pdf
Authors:
Steve Hardy <steve@linuxrealtime.co.uk>
Module Parameters
-----------------
* se_input: bool (default Y)
Single ended operation - set to N for differential mode
* int_vref: bool (default Y)
Operate with the internal 2.5V reference - set to N for external reference
* vref_mv: int (default 2500)
If using an external reference, set this to the reference voltage in mV
Description
-----------
This driver implements support for the Texas Instruments ADS7828.
This device is a 12-bit 8-channel A-D converter.
It can operate in single ended mode (8 +ve inputs) or in differential mode,
where 4 differential pairs can be measured.
The chip also has the facility to use an external voltage reference. This
may be required if your hardware supplies the ADS7828 from a 5V supply, see
the datasheet for more details.

2
Documentation/hwmon/it87
View File

@ -30,7 +30,7 @@ Supported chips:
Datasheet: No longer be available
Authors:
Christophe Gauthron <chrisg@0-in.com>
Christophe Gauthron
Jean Delvare <khali@linux-fr.org>

4
Documentation/hwmon/lm78
View File

@ -4,12 +4,12 @@ Kernel driver lm78
Supported chips:
* National Semiconductor LM78 / LM78-J
Prefix: 'lm78'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
* National Semiconductor LM79
Prefix: 'lm79'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/

11
Documentation/hwmon/lm87
View File

@ -4,8 +4,12 @@ Kernel driver lm87
Supported chips:
* National Semiconductor LM87
Prefix: 'lm87'
Addresses scanned: I2C 0x2c - 0x2f
Addresses scanned: I2C 0x2c - 0x2e
Datasheet: http://www.national.com/pf/LM/LM87.html
* Analog Devices ADM1024
Prefix: 'adm1024'
Addresses scanned: I2C 0x2c - 0x2e
Datasheet: http://www.analog.com/en/prod/0,2877,ADM1024,00.html
Authors:
Frodo Looijaard <frodol@dds.nl>,
@ -19,11 +23,12 @@ Authors:
Description
-----------
This driver implements support for the National Semiconductor LM87.
This driver implements support for the National Semiconductor LM87
and the Analog Devices ADM1024.
The LM87 implements up to three temperature sensors, up to two fan
rotation speed sensors, up to seven voltage sensors, alarms, and some
miscellaneous stuff.
miscellaneous stuff. The ADM1024 is fully compatible.
Temperatures are measured in degrees Celsius. Each input has a high
and low alarm settings. A high limit produces an alarm when the value

2
Documentation/hwmon/userspace-tools
View File

@ -14,7 +14,7 @@ Lm-sensors
Core set of utilities that will allow you to obtain health information,
setup monitoring limits etc. You can get them on their homepage
http://www.lm-sensors.nu/ or as a package from your Linux distribution.
http://www.lm-sensors.org/ or as a package from your Linux distribution.
If from website:
Get lm-sensors from project web site. Please note, you need only userspace

5
Documentation/hwmon/w83627ehf
View File

@ -23,8 +23,9 @@ W83627DHG super I/O chips. We will refer to them collectively as Winbond chips.
The chips implement three temperature sensors, five fan rotation
speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
VID (6 pins), alarms with beep warnings (control unimplemented), and
some automatic fan regulation strategies (plus manual fan control mode).
VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG), alarms with beep
warnings (control unimplemented), and some automatic fan regulation
strategies (plus manual fan control mode).
Temperatures are measured in degrees Celsius and measurement resolution is 1
degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when

3
Documentation/hwmon/w83627hf
View File

@ -73,5 +73,4 @@ doesn't help, you may just ignore the bogus VID reading with no harm done.
For further information on this driver see the w83781d driver documentation.
[1] http://www2.lm-sensors.nu/~lm78/cvs/browse.cgi/lm_sensors2/doc/vid
[1] http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/vid

22
Documentation/hwmon/w83781d
View File

@ -4,20 +4,16 @@ Kernel driver w83781d
Supported chips:
* Winbond W83781D
Prefix: 'w83781d'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf
* Winbond W83782D
Prefix: 'w83782d'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: http://www.winbond.com/PDF/sheet/w83782d.pdf
* Winbond W83783S
Prefix: 'w83783s'
Addresses scanned: I2C 0x2d
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf
* Winbond W83627HF
Prefix: 'w83627hf'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
* Asus AS99127F
Prefix: 'as99127f'
Addresses scanned: I2C 0x28 - 0x2f
@ -50,20 +46,18 @@ force_subclients=bus,caddr,saddr,saddr
Description
-----------
This driver implements support for the Winbond W83781D, W83782D, W83783S,
W83627HF chips, and the Asus AS99127F chips. We will refer to them
collectively as W8378* chips.
This driver implements support for the Winbond W83781D, W83782D, W83783S
chips, and the Asus AS99127F chips. We will refer to them collectively as
W8378* chips.
There is quite some difference between these chips, but they are similar
enough that it was sensible to put them together in one driver.
The W83627HF chip is assumed to be identical to the ISA W83782D.
The Asus chips are similar to an I2C-only W83782D.
Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
as99127f 7 3 0 3 0x31 0x12c3 yes no
as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC)
w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
@ -143,9 +137,9 @@ Individual alarm and beep bits:
0x000400: in6
0x000800: fan3
0x001000: chassis
0x002000: temp3 (W83782D and W83627HF only)
0x010000: in7 (W83782D and W83627HF only)
0x020000: in8 (W83782D and W83627HF only)
0x002000: temp3 (W83782D only)
0x010000: in7 (W83782D only)
0x020000: in8 (W83782D only)
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may

54
Documentation/hwmon/w83l786ng Normal file
View File

@ -0,0 +1,54 @@
Kernel driver w83l786ng
=====================
Supported chips:
* Winbond W83L786NG/W83L786NR
Prefix: 'w83l786ng'
Addresses scanned: I2C 0x2e - 0x2f
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L786NRNG09.pdf
Author: Kevin Lo <kevlo@kevlo.org>
Module Parameters
-----------------
* reset boolean
(default 0)
Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
behavior is no chip reset to preserve BIOS settings
Description
-----------
This driver implements support for Winbond W83L786NG/W83L786NR chips.
The driver implements two temperature sensors, two fan rotation speed
sensors, and three voltage sensors.
Temperatures are measured in degrees Celsius and measurement resolution is 1
degC for temp1 and temp2.
Fan rotation speeds are reported in RPM (rotations per minute). Fan readings
readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64
or 128 for fan 1/2) to give the readings more range or accuracy.
Voltage sensors (also known as IN sensors) report their values in millivolts.
An alarm is triggered if the voltage has crossed a programmable minimum
or maximum limit.
/sys files
----------
pwm[1-2] - this file stores PWM duty cycle or DC value (fan speed) in range:
0 (stop) to 255 (full)
pwm[1-2]_enable - this file controls mode of fan/temperature control:
* 0 Manual Mode
* 1 Thermal Cruise
* 2 Smart Fan II
* 4 FAN_SET
pwm[1-2]_mode - Select PWM of DC mode
* 0 DC
* 1 PWM
tolerance[1-2] - Value in degrees of Celsius (degC) for +- T

2
Documentation/i2c/busses/i2c-piix4
View File

@ -95,4 +95,4 @@ of all affected systems, so the only safe solution was to prevent access to
the SMBus on all IBM systems (detected using DMI data.)
For additional information, read:
http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/README.thinkpad
http://www.lm-sensors.org/browser/lm-sensors/trunk/README.thinkpad

2
Documentation/input/input-programming.txt
View File

@ -22,7 +22,7 @@ static struct input_dev *button_dev;
static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
{
input_report_key(button_dev, BTN_1, inb(BUTTON_PORT) & 1);
input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
input_sync(button_dev);
}

15
Documentation/iostats.txt
View File

@ -58,7 +58,7 @@ they should not wrap twice before you notice them.
Each set of stats only applies to the indicated device; if you want
system-wide stats you'll have to find all the devices and sum them all up.
Field 1 -- # of reads issued
Field 1 -- # of reads completed
This is the total number of reads completed successfully.
Field 2 -- # of reads merged, field 6 -- # of writes merged
Reads and writes which are adjacent to each other may be merged for
@ -132,6 +132,19 @@ words, the number of reads for partitions is counted slightly before time
of queuing for partitions, and at completion for whole disks. This is
a subtle distinction that is probably uninteresting for most cases.
More significant is the error induced by counting the numbers of
reads/writes before merges for partitions and after for disks. Since a
typical workload usually contains a lot of successive and adjacent requests,
the number of reads/writes issued can be several times higher than the
number of reads/writes completed.
In 2.6.25, the full statistic set is again available for partitions and
disk and partition statistics are consistent again. Since we still don't
keep record of the partition-relative address, an operation is attributed to
the partition which contains the first sector of the request after the
eventual merges. As requests can be merged across partition, this could lead
to some (probably insignificant) innacuracy.
Additional notes
----------------

12
Documentation/kernel-parameters.txt
View File

@ -147,8 +147,10 @@ and is between 256 and 4096 characters. It is defined in the file
default: 0
acpi_sleep= [HW,ACPI] Sleep options
Format: { s3_bios, s3_mode }
See Documentation/power/video.txt
Format: { s3_bios, s3_mode, s3_beep }
See Documentation/power/video.txt for s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
as soon as the kernel's real-mode entry point is called.
acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Format: { level | edge | high | low }
@ -175,6 +177,9 @@ and is between 256 and 4096 characters. It is defined in the file
acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT
acpi_no_initrd_override [KNL,ACPI]
Disable loading custom ACPI tables from the initramfs
acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
Format: To spoof as Windows 98: ="Microsoft Windows"
@ -1968,9 +1973,6 @@ and is between 256 and 4096 characters. It is defined in the file
<deci-seconds>: poll all this frequency
0: no polling (default)
time Show timing data prefixed to each printk message line
[deprecated, see 'printk.time']
tipar.timeout= [HW,PPT]
Set communications timeout in tenths of a second
(default 15).

92
Documentation/kprobes.txt
View File

@ -92,11 +92,12 @@ handler has run. Up to MAX_STACK_SIZE bytes are copied -- e.g.,
64 bytes on i386.
Note that the probed function's args may be passed on the stack
or in registers (e.g., for x86_64 or for an i386 fastcall function).
The jprobe will work in either case, so long as the handler's
prototype matches that of the probed function.
or in registers. The jprobe will work in either case, so long as the
handler's prototype matches that of the probed function.
1.3 How Does a Return Probe Work?
1.3 Return Probes
1.3.1 How Does a Return Probe Work?
When you call register_kretprobe(), Kprobes establishes a kprobe at
the entry to the function. When the probed function is called and this
@ -107,9 +108,9 @@ At boot time, Kprobes registers a kprobe at the trampoline.
When the probed function executes its return instruction, control
passes to the trampoline and that probe is hit. Kprobes' trampoline
handler calls the user-specified handler associated with the kretprobe,
then sets the saved instruction pointer to the saved return address,
and that's where execution resumes upon return from the trap.
handler calls the user-specified return handler associated with the
kretprobe, then sets the saved instruction pointer to the saved return
address, and that's where execution resumes upon return from the trap.
While the probed function is executing, its return address is
stored in an object of type kretprobe_instance. Before calling
@ -131,6 +132,30 @@ zero when the return probe is registered, and is incremented every
time the probed function is entered but there is no kretprobe_instance
object available for establishing the return probe.
1.3.2 Kretprobe entry-handler
Kretprobes also provides an optional user-specified handler which runs
on function entry. This handler is specified by setting the entry_handler
field of the kretprobe struct. Whenever the kprobe placed by kretprobe at the
function entry is hit, the user-defined entry_handler, if any, is invoked.
If the entry_handler returns 0 (success) then a corresponding return handler
is guaranteed to be called upon function return. If the entry_handler
returns a non-zero error then Kprobes leaves the return address as is, and
the kretprobe has no further effect for that particular function instance.
Multiple entry and return handler invocations are matched using the unique
kretprobe_instance object associated with them. Additionally, a user
may also specify per return-instance private data to be part of each
kretprobe_instance object. This is especially useful when sharing private
data between corresponding user entry and return handlers. The size of each
private data object can be specified at kretprobe registration time by
setting the data_size field of the kretprobe struct. This data can be
accessed through the data field of each kretprobe_instance object.
In case probed function is entered but there is no kretprobe_instance
object available, then in addition to incrementing the nmissed count,
the user entry_handler invocation is also skipped.
2. Architectures Supported
Kprobes, jprobes, and return probes are implemented on the following
@ -244,9 +269,9 @@ Kprobes runs the handler whose address is jp->entry.
The handler should have the same arg list and return type as the probed
function; and just before it returns, it must call jprobe_return().
(The handler never actually returns, since jprobe_return() returns
control to Kprobes.) If the probed function is declared asmlinkage,
fastcall, or anything else that affects how args are passed, the
handler's declaration must match.
control to Kprobes.) If the probed function is declared asmlinkage
or anything else that affects how args are passed, the handler's
declaration must match.
register_jprobe() returns 0 on success, or a negative errno otherwise.
@ -274,6 +299,8 @@ of interest:
- ret_addr: the return address
- rp: points to the corresponding kretprobe object
- task: points to the corresponding task struct
- data: points to per return-instance private data; see "Kretprobe
entry-handler" for details.
The regs_return_value(regs) macro provides a simple abstraction to
extract the return value from the appropriate register as defined by
@ -556,23 +583,52 @@ report failed calls to sys_open().
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kprobes.h>
#include <linux/ktime.h>
/* per-instance private data */
struct my_data {
ktime_t entry_stamp;
};
static const char *probed_func = "sys_open";
/* Return-probe handler: If the probed function fails, log the return value. */
static int ret_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
/* Timestamp function entry. */
static int entry_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
{
struct my_data *data;
if(!current->mm)
return 1; /* skip kernel threads */
data = (struct my_data *)ri->data;
data->entry_stamp = ktime_get();
return 0;
}
/* If the probed function failed, log the return value and duration.
* Duration may turn out to be zero consistently, depending upon the
* granularity of time accounting on the platform. */
static int return_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
{
int retval = regs_return_value(regs);
struct my_data *data = (struct my_data *)ri->data;
s64 delta;
ktime_t now;
if (retval < 0) {
printk("%s returns %d\n", probed_func, retval);
now = ktime_get();
delta = ktime_to_ns(ktime_sub(now, data->entry_stamp));
printk("%s: return val = %d (duration = %lld ns)\n",
probed_func, retval, delta);
}
return 0;
}
static struct kretprobe my_kretprobe = {
.handler = ret_handler,
/* Probe up to 20 instances concurrently. */
.maxactive = 20
.handler = return_handler,
.entry_handler = entry_handler,
.data_size = sizeof(struct my_data),
.maxactive = 20, /* probe up to 20 instances concurrently */
};
static int __init kretprobe_init(void)
@ -584,7 +640,7 @@ static int __init kretprobe_init(void)
printk("register_kretprobe failed, returned %d\n", ret);
return -1;
}
printk("Planted return probe at %p\n", my_kretprobe.kp.addr);
printk("Kretprobe active on %s\n", my_kretprobe.kp.symbol_name);
return 0;
}
@ -594,7 +650,7 @@ static void __exit kretprobe_exit(void)
printk("kretprobe unregistered\n");
/* nmissed > 0 suggests that maxactive was set too low. */
printk("Missed probing %d instances of %s\n",
my_kretprobe.nmissed, probed_func);
my_kretprobe.nmissed, probed_func);
}
module_init(kretprobe_init)

20
Documentation/kref.txt
View File

@ -141,10 +141,10 @@ The last rule (rule 3) is the nastiest one to handle. Say, for
instance, you have a list of items that are each kref-ed, and you wish
to get the first one. You can't just pull the first item off the list
and kref_get() it. That violates rule 3 because you are not already
holding a valid pointer. You must add locks or semaphores. For
instance:
holding a valid pointer. You must add a mutex (or some other lock).
For instance:
static DECLARE_MUTEX(sem);
static DEFINE_MUTEX(mutex);
static LIST_HEAD(q);
struct my_data
{
@ -155,12 +155,12 @@ struct my_data
static struct my_data *get_entry()
{
struct my_data *entry = NULL;
down(&sem);
mutex_lock(&mutex);
if (!list_empty(&q)) {
entry = container_of(q.next, struct my_q_entry, link);
kref_get(&entry->refcount);
}
up(&sem);
mutex_unlock(&mutex);
return entry;
}
@ -174,9 +174,9 @@ static void release_entry(struct kref *ref)
static void put_entry(struct my_data *entry)
{
down(&sem);
mutex_lock(&mutex);
kref_put(&entry->refcount, release_entry);
up(&sem);
mutex_unlock(&mutex);
}
The kref_put() return value is useful if you do not want to hold the
@ -191,13 +191,13 @@ static void release_entry(struct kref *ref)
static void put_entry(struct my_data *entry)
{
down(&sem);
mutex_lock(&mutex);
if (kref_put(&entry->refcount, release_entry)) {
list_del(&entry->link);
up(&sem);
mutex_unlock(&mutex);
kfree(entry);
} else
up(&sem);
mutex_unlock(&mutex);
}
This is really more useful if you have to call other routines as part

10
Documentation/laptops/00-INDEX Normal file
View File

@ -0,0 +1,10 @@
00-INDEX
- This file
acer-wmi.txt
- information on the Acer Laptop WMI Extras driver.
sony-laptop.txt
- Sony Notebook Control Driver (SNC) Readme.
sonypi.txt
- info on Linux Sony Programmable I/O Device support.
thinkpad-acpi.txt
- information on the (IBM and Lenovo) ThinkPad ACPI Extras driver.

202
Documentation/laptops/acer-wmi.txt Normal file
View File

@ -0,0 +1,202 @@
Acer Laptop WMI Extras Driver
http://code.google.com/p/aceracpi
Version 0.1
9th February 2008
Copyright 2007-2008 Carlos Corbacho <carlos@strangeworlds.co.uk>
acer-wmi is a driver to allow you to control various parts of your Acer laptop
hardware under Linux which are exposed via ACPI-WMI.
This driver completely replaces the old out-of-tree acer_acpi, which I am
currently maintaining for bug fixes only on pre-2.6.25 kernels. All development
work is now focused solely on acer-wmi.
Disclaimer
**********
Acer and Wistron have provided nothing towards the development acer_acpi or
acer-wmi. All information we have has been through the efforts of the developers
and the users to discover as much as possible about the hardware.
As such, I do warn that this could break your hardware - this is extremely
unlikely of course, but please bear this in mind.
Background
**********
acer-wmi is derived from acer_acpi, originally developed by Mark
Smith in 2005, then taken over by Carlos Corbacho in 2007, in order to activate
the wireless LAN card under a 64-bit version of Linux, as acerhk[1] (the
previous solution to the problem) relied on making 32 bit BIOS calls which are
not possible in kernel space from a 64 bit OS.
[1] acerhk: http://www.cakey.de/acerhk/
Supported Hardware
******************
Please see the website for the current list of known working hardare:
http://code.google.com/p/aceracpi/wiki/SupportedHardware
If your laptop is not listed, or listed as unknown, and works with acer-wmi,
please contact me with a copy of the DSDT.
If your Acer laptop doesn't work with acer-wmi, I would also like to see the
DSDT.
To send me the DSDT, as root/sudo:
cat /sys/firmware/acpi/DSDT > dsdt
And send me the resulting 'dsdt' file.
Usage
*****
On Acer laptops, acer-wmi should already be autoloaded based on DMI matching.
For non-Acer laptops, until WMI based autoloading support is added, you will
need to manually load acer-wmi.
acer-wmi creates /sys/devices/platform/acer-wmi, and fills it with various
files whose usage is detailed below, which enables you to control some of the
following (varies between models):
* the wireless LAN card radio
* inbuilt Bluetooth adapter
* inbuilt 3G card
* mail LED of your laptop
* brightness of the LCD panel
Wireless
********
With regards to wireless, all acer-wmi does is enable the radio on the card. It
is not responsible for the wireless LED - once the radio is enabled, this is
down to the wireless driver for your card. So the behaviour of the wireless LED,
once you enable the radio, will depend on your hardware and driver combination.
e.g. With the BCM4318 on the Acer Aspire 5020 series:
ndiswrapper: Light blinks on when transmitting
bcm43xx/b43: Solid light, blinks off when transmitting
Wireless radio control is unconditionally enabled - all Acer laptops that support
acer-wmi come with built-in wireless. However, should you feel so inclined to
ever wish to remove the card, or swap it out at some point, please get in touch
with me, as we may well be able to gain some data on wireless card detection.
To read the status of the wireless radio (0=off, 1=on):
cat /sys/devices/platform/acer-wmi/wireless
To enable the wireless radio:
echo 1 > /sys/devices/platform/acer-wmi/wireless
To disable the wireless radio:
echo 0 > /sys/devices/platform/acer-wmi/wireless
To set the state of the wireless radio when loading acer-wmi, pass:
wireless=X (where X is 0 or 1)
Bluetooth
*********
For bluetooth, this is an internal USB dongle, so once enabled, you will get
a USB device connection event, and a new USB device appears. When you disable
bluetooth, you get the reverse - a USB device disconnect event, followed by the
device disappearing again.
Bluetooth is autodetected by acer-wmi, so if you do not have a bluetooth module
installed in your laptop, this file won't exist (please be aware that it is
quite common for Acer not to fit bluetooth to their laptops - so just because
you have a bluetooth button on the laptop, doesn't mean that bluetooth is
installed).
For the adventurously minded - if you want to buy an internal bluetooth
module off the internet that is compatible with your laptop and fit it, then
it will work just fine with acer-wmi.
To read the status of the bluetooth module (0=off, 1=on):
cat /sys/devices/platform/acer-wmi/wireless
To enable the bluetooth module:
echo 1 > /sys/devices/platform/acer-wmi/bluetooth
To disable the bluetooth module:
echo 0 > /sys/devices/platform/acer-wmi/bluetooth
To set the state of the bluetooth module when loading acer-wmi, pass:
bluetooth=X (where X is 0 or 1)
3G
**
3G is currently not autodetected, so the 'threeg' file is always created under
sysfs. So far, no-one in possession of an Acer laptop with 3G built-in appears to
have tried Linux, or reported back, so we don't have any information on this.
If you have an Acer laptop that does have a 3G card in, please contact me so we
can properly detect these, and find out a bit more about them.
To read the status of the 3G card (0=off, 1=on):
cat /sys/devices/platform/acer-wmi/threeg
To enable the 3G card:
echo 1 > /sys/devices/platform/acer-wmi/threeg
To disable the 3G card:
echo 0 > /sys/devices/platform/acer-wmi/threeg
To set the state of the 3G card when loading acer-wmi, pass:
threeg=X (where X is 0 or 1)
Mail LED
********
This can be found in most older Acer laptops supported by acer-wmi, and many
newer ones - it is built into the 'mail' button, and blinks when active.
On newer (WMID) laptops though, we have no way of detecting the mail LED. If
your laptop identifies itself in dmesg as a WMID model, then please try loading
acer_acpi with:
force_series=2490
This will use a known alternative method of reading/ writing the mail LED. If
it works, please report back to me with the DMI data from your laptop so this
can be added to acer-wmi.
The LED is exposed through the LED subsystem, and can be found in:
/sys/devices/platform/acer-wmi/leds/acer-mail:green/
The mail LED is autodetected, so if you don't have one, the LED device won't
be registered.
If you have a mail LED that is not green, please report this to me.
Backlight
*********
The backlight brightness control is available on all acer-wmi supported
hardware. The maximum brightness level is usually 15, but on some newer laptops
it's 10 (this is again autodetected).
The backlight is exposed through the backlight subsystem, and can be found in:
/sys/devices/platform/acer-wmi/backlight/acer-wmi/
Credits
*******
Olaf Tauber, who did the real hard work when he developed acerhk
http://www.informatik.hu-berlin.de/~tauber/acerhk
All the authors of laptop ACPI modules in the kernel, whose work
was an inspiration in the early days of acer_acpi
Mathieu Segaud, who solved the problem with having to modprobe the driver
twice in acer_acpi 0.2.
Jim Ramsay, who added support for the WMID interface
Mark Smith, who started the original acer_acpi
And the many people who have used both acer_acpi and acer-wmi.

1
Documentation/sony-laptop.txt → Documentation/laptops/sony-laptop.txt
View File

@ -114,4 +114,3 @@ Bugs/Limitations:
sonypi driver (through /dev/sonypi) does not try to use the
sony-laptop driver. In the future, spicctrl could try sonypi first,
and if it isn't present, try sony-laptop instead.

0
Documentation/sonypi.txt → Documentation/laptops/sonypi.txt
View File

116
Documentation/thinkpad-acpi.txt → Documentation/laptops/thinkpad-acpi.txt
View File

@ -1,7 +1,7 @@
ThinkPad ACPI Extras Driver
Version 0.17
October 04th, 2007
Version 0.19
January 06th, 2008
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@ -215,6 +215,11 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file:
... any other 8-hex-digit mask ...
echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
The procfs interface does not support NVRAM polling control. So as to
maintain maximum bug-to-bug compatibility, it does not report any masks,
nor does it allow one to manipulate the hot key mask when the firmware
does not support masks at all, even if NVRAM polling is in use.
sysfs notes:
hotkey_bios_enabled:
@ -231,17 +236,26 @@ sysfs notes:
to this value.
hotkey_enable:
Enables/disables the hot keys feature, and reports
current status of the hot keys feature.
Enables/disables the hot keys feature in the ACPI
firmware, and reports current status of the hot keys
feature. Has no effect on the NVRAM hot key polling
functionality.
0: disables the hot keys feature / feature disabled
1: enables the hot keys feature / feature enabled
hotkey_mask:
bit mask to enable driver-handling and ACPI event
generation for each hot key (see above). Returns the
current status of the hot keys mask, and allows one to
modify it.
bit mask to enable driver-handling (and depending on
the firmware, ACPI event generation) for each hot key
(see above). Returns the current status of the hot keys
mask, and allows one to modify it.
Note: when NVRAM polling is active, the firmware mask
will be different from the value returned by
hotkey_mask. The driver will retain enabled bits for
hotkeys that are under NVRAM polling even if the
firmware refuses them, and will not set these bits on
the firmware hot key mask.
hotkey_all_mask:
bit mask that should enable event reporting for all
@ -257,12 +271,48 @@ sysfs notes:
handled by the firmware anyway. Echo it to
hotkey_mask above, to use.
hotkey_source_mask:
bit mask that selects which hot keys will the driver
poll the NVRAM for. This is auto-detected by the driver
based on the capabilities reported by the ACPI firmware,
but it can be overridden at runtime.
Hot keys whose bits are set in both hotkey_source_mask
and also on hotkey_mask are polled for in NVRAM. Only a
few hot keys are available through CMOS NVRAM polling.
Warning: when in NVRAM mode, the volume up/down/mute
keys are synthesized according to changes in the mixer,
so you have to use volume up or volume down to unmute,
as per the ThinkPad volume mixer user interface. When
in ACPI event mode, volume up/down/mute are reported as
separate events, but this behaviour may be corrected in
future releases of this driver, in which case the
ThinkPad volume mixer user interface semanthics will be
enforced.
hotkey_poll_freq:
frequency in Hz for hot key polling. It must be between
0 and 25 Hz. Polling is only carried out when strictly
needed.
Setting hotkey_poll_freq to zero disables polling, and
will cause hot key presses that require NVRAM polling
to never be reported.
Setting hotkey_poll_freq too low will cause repeated
pressings of the same hot key to be misreported as a
single key press, or to not even be detected at all.
The recommended polling frequency is 10Hz.
hotkey_radio_sw:
if the ThinkPad has a hardware radio switch, this
attribute will read 0 if the switch is in the "radios
disabled" postition, and 1 if the switch is in the
"radios enabled" position.
This attribute has poll()/select() support.
hotkey_report_mode:
Returns the state of the procfs ACPI event report mode
filter for hot keys. If it is set to 1 (the default),
@ -277,6 +327,25 @@ sysfs notes:
May return -EPERM (write access locked out by module
parameter) or -EACCES (read-only).
wakeup_reason:
Set to 1 if the system is waking up because the user
requested a bay ejection. Set to 2 if the system is
waking up because the user requested the system to
undock. Set to zero for normal wake-ups or wake-ups
due to unknown reasons.
This attribute has poll()/select() support.
wakeup_hotunplug_complete:
Set to 1 if the system was waken up because of an
undock or bay ejection request, and that request
was sucessfully completed. At this point, it might
be useful to send the system back to sleep, at the
user's choice. Refer to HKEY events 0x4003 and
0x3003, below.
This attribute has poll()/select() support.
input layer notes:
A Hot key is mapped to a single input layer EV_KEY event, possibly
@ -427,6 +496,23 @@ Non hot-key ACPI HKEY event map:
The above events are not propagated by the driver, except for legacy
compatibility purposes when hotkey_report_mode is set to 1.
0x2304 System is waking up from suspend to undock
0x2305 System is waking up from suspend to eject bay
0x2404 System is waking up from hibernation to undock
0x2405 System is waking up from hibernation to eject bay
The above events are never propagated by the driver.
0x3003 Bay ejection (see 0x2x05) complete, can sleep again
0x4003 Undocked (see 0x2x04), can sleep again
0x5009 Tablet swivel: switched to tablet mode
0x500A Tablet swivel: switched to normal mode
0x500B Tablet pen insterted into its storage bay
0x500C Tablet pen removed from its storage bay
0x5010 Brightness level changed (newer Lenovo BIOSes)
The above events are propagated by the driver.
Compatibility notes:
ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never
@ -1263,3 +1349,17 @@ Sysfs interface changelog:
and the hwmon class for libsensors4 (lm-sensors 3)
compatibility. Moved all hwmon attributes to this
new platform device.
0x020100: Marker for thinkpad-acpi with hot key NVRAM polling
support. If you must, use it to know you should not
start an userspace NVRAM poller (allows to detect when
NVRAM is compiled out by the user because it is
unneeded/undesired in the first place).
0x020101: Marker for thinkpad-acpi with hot key NVRAM polling
and proper hotkey_mask semanthics (version 8 of the
NVRAM polling patch). Some development snapshots of
0.18 had an earlier version that did strange things
to hotkey_mask.
0x020200: Add poll()/select() support to the following attributes:
hotkey_radio_sw, wakeup_hotunplug_complete, wakeup_reason

29
Documentation/leds-class.txt
View File

@ -39,12 +39,33 @@ LED Device Naming
Is currently of the form:
"devicename:colour"
"devicename:colour:function"
There have been calls for LED properties such as colour to be exported as
individual led class attributes. As a solution which doesn't incur as much
overhead, I suggest these become part of the device name. The naming scheme
above leaves scope for further attributes should they be needed.
above leaves scope for further attributes should they be needed. If sections
of the name don't apply, just leave that section blank.
Hardware accelerated blink of LEDs
==================================
Some LEDs can be programmed to blink without any CPU interaction. To
support this feature, a LED driver can optionally implement the
blink_set() function (see <linux/leds.h>). If implemeted, triggers can
attempt to use it before falling back to software timers. The blink_set()
function should return 0 if the blink setting is supported, or -EINVAL
otherwise, which means that LED blinking will be handled by software.
The blink_set() function should choose a user friendly blinking
value if it is called with *delay_on==0 && *delay_off==0 parameters. In
this case the driver should give back the chosen value through delay_on
and delay_off parameters to the leds subsystem.
Any call to the brightness_set() callback function should cancel the
previously programmed hardware blinking function so setting the brightness
to 0 can also cancel the blinking of the LED.
Known Issues
@ -55,10 +76,6 @@ would cause nightmare dependency issues. I see this as a minor issue
compared to the benefits the simple trigger functionality brings. The
rest of the LED subsystem can be modular.
Some leds can be programmed to flash in hardware. As this isn't a generic
LED device property, this should be exported as a device specific sysfs
attribute rather than part of the class if this functionality is required.
Future Development
==================

10
Documentation/md.txt
View File

@ -416,6 +416,16 @@ also have
sectors in total that could need to be processed. The two
numbers are separated by a '/' thus effectively showing one
value, a fraction of the process that is complete.
A 'select' on this attribute will return when resync completes,
when it reaches the current sync_max (below) and possibly at
other times.
sync_max
This is a number of sectors at which point a resync/recovery
process will pause. When a resync is active, the value can
only ever be increased, never decreased. The value of 'max'
effectively disables the limit.
sync_speed
This shows the current actual speed, in K/sec, of the current

149
Documentation/mn10300/ABI.txt Normal file
View File

@ -0,0 +1,149 @@
=========================
MN10300 FUNCTION CALL ABI
=========================
=======
GENERAL
=======
The MN10300/AM33 kernel runs in little-endian mode; big-endian mode is not
supported.
The stack grows downwards, and should always be 32-bit aligned. There are
separate stack pointer registers for userspace and the kernel.
================
ARGUMENT PASSING
================
The first two arguments (assuming up to 32-bits per argument) to a function are
passed in the D0 and D1 registers respectively; all other arguments are passed
on the stack.
If 64-bit arguments are being passed, then they are never split between
registers and the stack. If the first argument is a 64-bit value, it will be
passed in D0:D1. If the first argument is not a 64-bit value, but the second
is, the second will be passed entirely on the stack and D1 will be unused.
Arguments smaller than 32-bits are not coelesced within a register or a stack
word. For example, two byte-sized arguments will always be passed in separate
registers or word-sized stack slots.
=================
CALLING FUNCTIONS
=================
The caller must allocate twelve bytes on the stack for the callee's use before
it inserts a CALL instruction. The CALL instruction will write into the TOS
word, but won't actually modify the stack pointer; similarly, the RET
instruction reads from the TOS word of the stack, but doesn't move the stack
pointer beyond it.
Stack:
| |
| |
|---------------| SP+20
| 4th Arg |
|---------------| SP+16
| 3rd Arg |
|---------------| SP+12
| D1 Save Slot |
|---------------| SP+8
| D0 Save Slot |
|---------------| SP+4
| Return Addr |
|---------------| SP
| |
| |
The caller must leave space on the stack (hence an allocation of twelve bytes)
in which the callee may store the first two arguments.
============
RETURN VALUE
============
The return value is passed in D0 for an integer (or D0:D1 for a 64-bit value),
or A0 for a pointer.
If the return value is a value larger than 64-bits, or is a structure or an
array, then a hidden first argument will be passed to the callee by the caller:
this will point to a piece of memory large enough to hold the result of the
function. In this case, the callee will return the value in that piece of
memory, and no value will be returned in D0 or A0.
===================
REGISTER CLOBBERING
===================
The values in certain registers may be clobbered by the callee, and other
values must be saved:
Clobber: D0-D1, A0-A1, E0-E3
Save: D2-D3, A2-A3, E4-E7, SP
All other non-supervisor-only registers are clobberable (such as MDR, MCRL,
MCRH).
=================
SPECIAL REGISTERS
=================
Certain ordinary registers may carry special usage for the compiler:
A3: Frame pointer
E2: TLS pointer
==========
KERNEL ABI
==========
The kernel may use a slightly different ABI internally.
(*) E2
If CONFIG_MN10300_CURRENT_IN_E2 is defined, then the current task pointer
will be kept in the E2 register, and that register will be marked
unavailable for the compiler to use as a scratch register.
Normally the kernel uses something like:
MOV SP,An
AND 0xFFFFE000,An
MOV (An),Rm // Rm holds current
MOV (yyy,Rm) // Access current->yyy
To find the address of current; but since this option permits current to
be carried globally in an register, it can use:
MOV (yyy,E2) // Access current->yyy
instead.
===============
SYSTEM CALL ABI
===============
System calls are called with the following convention:
REGISTER ENTRY EXIT
=============== ======================= =======================
D0 Syscall number Return value
A0 1st syscall argument Saved
D1 2nd syscall argument Saved
A3 3rd syscall argument Saved
A2 4th syscall argument Saved
D3 5th syscall argument Saved
D2 6th syscall argument Saved
All other registers are saved. The layout is a consequence of the way the MOVM
instruction stores registers onto the stack.

60
Documentation/mn10300/compartmentalisation.txt Normal file
View File

@ -0,0 +1,60 @@
=========================================
PART-SPECIFIC SOURCE COMPARTMENTALISATION
=========================================
The sources for various parts are compartmentalised at two different levels:
(1) Processor level
The "processor level" is a CPU core plus the other on-silicon
peripherals.
Processor-specific header files are divided among directories in a similar
way to the CPU level:
(*) include/asm-mn10300/proc-mn103e010/
Support for the AM33v2 CPU core.
The appropriate processor is selected by a CONFIG_MN10300_PROC_YYYY option
from the "Processor support" choice menu in the arch/mn10300/Kconfig file.
(2) Unit level
The "unit level" is a processor plus all the external peripherals
controlled by that processor.
Unit-specific header files are divided among directories in a similar way
to the CPU level; not only that, but specific sources may also be
segregated into separate directories under the arch directory:
(*) include/asm-mn10300/unit-asb2303/
(*) arch/mn10300/unit-asb2303/
Support for the ASB2303 board with an ASB2308 daughter board.
(*) include/asm-mn10300/unit-asb2305/
(*) arch/mn10300/unit-asb2305/
Support for the ASB2305 board.
The appropriate processor is selected by a CONFIG_MN10300_UNIT_ZZZZ option
from the "Unit type" choice menu in the arch/mn10300/Kconfig file.
============
COMPILE TIME
============
When the kernel is compiled, symbolic links will be made in the asm header file
directory for this arch:
include/asm-mn10300/proc => include/asm-mn10300/proc-YYYY/
include/asm-mn10300/unit => include/asm-mn10300/unit-ZZZZ/
So that the header files contained in those directories can be accessed without
lots of #ifdef-age.
The appropriate arch/mn10300/unit-ZZZZ directory will also be entered by the
compilation process; all other unit-specific directories will be ignored.

5
Documentation/power/swsusp.txt
View File

@ -386,6 +386,11 @@ before suspending; then remount them after resuming.
There is a work-around for this problem. For more information, see
Documentation/usb/persist.txt.
Q: Can I suspend-to-disk using a swap partition under LVM?
A: No. You can suspend successfully, but you'll not be able to
resume. uswsusp should be able to work with LVM. See suspend.sf.net.
Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
compiled with the similar configuration files. Anyway I found that
suspend to disk (and resume) is much slower on 2.6.16 compared to

42
Documentation/powerpc/booting-without-of.txt
View File

@ -57,6 +57,7 @@ Table of Contents
n) 4xx/Axon EMAC ethernet nodes
o) Xilinx IP cores
p) Freescale Synchronous Serial Interface
q) USB EHCI controllers
VII - Specifying interrupt information for devices
1) interrupts property
@ -2577,6 +2578,20 @@ platforms are moved over to use the flattened-device-tree model.
Requred properties:
- current-speed : Baud rate of uartlite
v) Xilinx hwicap
Xilinx hwicap devices provide access to the configuration logic
of the FPGA through the Internal Configuration Access Port
(ICAP). The ICAP enables partial reconfiguration of the FPGA,
readback of the configuration information, and some control over
'warm boots' of the FPGA fabric.
Required properties:
- xlnx,family : The family of the FPGA, necessary since the
capabilities of the underlying ICAP hardware
differ between different families. May be
'virtex2p', 'virtex4', or 'virtex5'.
p) Freescale Synchronous Serial Interface
The SSI is a serial device that communicates with audio codecs. It can
@ -2775,6 +2790,33 @@ platforms are moved over to use the flattened-device-tree model.
interrupt-parent = < &ipic >;
};
q) USB EHCI controllers
Required properties:
- compatible : should be "usb-ehci".
- reg : should contain at least address and length of the standard EHCI
register set for the device. Optional platform-dependent registers
(debug-port or other) can be also specified here, but only after
definition of standard EHCI registers.
- interrupts : one EHCI interrupt should be described here.
If device registers are implemented in big endian mode, the device
node should have "big-endian-regs" property.
If controller implementation operates with big endian descriptors,
"big-endian-desc" property should be specified.
If both big endian registers and descriptors are used by the controller
implementation, "big-endian" property can be specified instead of having
both "big-endian-regs" and "big-endian-desc".
Example (Sequoia 440EPx):
ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "usb-ehci";
interrupt-parent = <&UIC0>;
interrupts = <1a 4>;
reg = <0 e0000300 90 0 e0000390 70>;
big-endian;
};
More devices will be defined as this spec matures.
VII - Specifying interrupt information for devices

42
Documentation/rtc.txt
View File

@ -182,8 +182,8 @@ driver returns ENOIOCTLCMD. Some common examples:
since the frequency is stored in the irq_freq member of the rtc_device
structure. Your driver needs to initialize the irq_freq member during
init. Make sure you check the requested frequency is in range of your
hardware in the irq_set_freq function. If you cannot actually change
the frequency, just return -ENOTTY.
hardware in the irq_set_freq function. If it isn't, return -EINVAL. If
you cannot actually change the frequency, do not define irq_set_freq.
If all else fails, check out the rtc-test.c driver!
@ -268,8 +268,8 @@ int main(int argc, char **argv)
/* This read will block */
retval = read(fd, &data, sizeof(unsigned long));
if (retval == -1) {
perror("read");
exit(errno);
perror("read");
exit(errno);
}
fprintf(stderr, " %d",i);
fflush(stderr);
@ -326,11 +326,11 @@ test_READ:
rtc_tm.tm_sec %= 60;
rtc_tm.tm_min++;
}
if (rtc_tm.tm_min == 60) {
if (rtc_tm.tm_min == 60) {
rtc_tm.tm_min = 0;
rtc_tm.tm_hour++;
}
if (rtc_tm.tm_hour == 24)
if (rtc_tm.tm_hour == 24)
rtc_tm.tm_hour = 0;
retval = ioctl(fd, RTC_ALM_SET, &rtc_tm);
@ -407,8 +407,8 @@ test_PIE:
"\n...Periodic IRQ rate is fixed\n");
goto done;
}
perror("RTC_IRQP_SET ioctl");
exit(errno);
perror("RTC_IRQP_SET ioctl");
exit(errno);
}
fprintf(stderr, "\n%ldHz:\t", tmp);
@ -417,27 +417,27 @@ test_PIE:
/* Enable periodic interrupts */
retval = ioctl(fd, RTC_PIE_ON, 0);
if (retval == -1) {
perror("RTC_PIE_ON ioctl");
exit(errno);
perror("RTC_PIE_ON ioctl");
exit(errno);
}
for (i=1; i<21; i++) {
/* This blocks */
retval = read(fd, &data, sizeof(unsigned long));
if (retval == -1) {
perror("read");
exit(errno);
}
fprintf(stderr, " %d",i);
fflush(stderr);
irqcount++;
/* This blocks */
retval = read(fd, &data, sizeof(unsigned long));
if (retval == -1) {
perror("read");
exit(errno);
}
fprintf(stderr, " %d",i);
fflush(stderr);
irqcount++;
}
/* Disable periodic interrupts */
retval = ioctl(fd, RTC_PIE_OFF, 0);
if (retval == -1) {
perror("RTC_PIE_OFF ioctl");
exit(errno);
perror("RTC_PIE_OFF ioctl");
exit(errno);
}
}

59
Documentation/sched-rt-group.txt Normal file
View File

@ -0,0 +1,59 @@
Real-Time group scheduling.
The problem space:
In order to schedule multiple groups of realtime tasks each group must
be assigned a fixed portion of the CPU time available. Without a minimum
guarantee a realtime group can obviously fall short. A fuzzy upper limit
is of no use since it cannot be relied upon. Which leaves us with just
the single fixed portion.
CPU time is divided by means of specifying how much time can be spent
running in a given period. Say a frame fixed realtime renderer must
deliver 25 frames a second, which yields a period of 0.04s. Now say
it will also have to play some music and respond to input, leaving it
with around 80% for the graphics. We can then give this group a runtime
of 0.8 * 0.04s = 0.032s.
This way the graphics group will have a 0.04s period with a 0.032s runtime
limit.
Now if the audio thread needs to refill the DMA buffer every 0.005s, but
needs only about 3% CPU time to do so, it can do with a 0.03 * 0.005s
= 0.00015s.
The Interface:
system wide:
/proc/sys/kernel/sched_rt_period_ms
/proc/sys/kernel/sched_rt_runtime_us
CONFIG_FAIR_USER_SCHED
/sys/kernel/uids/<uid>/cpu_rt_runtime_us
or
CONFIG_FAIR_CGROUP_SCHED
/cgroup/<cgroup>/cpu.rt_runtime_us
[ time is specified in us because the interface is s32; this gives an
operating range of ~35m to 1us ]
The period takes values in [ 1, INT_MAX ], runtime in [ -1, INT_MAX - 1 ].
A runtime of -1 specifies runtime == period, ie. no limit.
New groups get the period from /proc/sys/kernel/sched_rt_period_us and
a runtime of 0.
Settings are constrained to:
\Sum_{i} runtime_{i} / global_period <= global_runtime / global_period
in order to keep the configuration schedulable.

16
Documentation/scheduler/00-INDEX Normal file
View File

@ -0,0 +1,16 @@
00-INDEX
- this file.
sched-arch.txt
- CPU Scheduler implementation hints for architecture specific code.
sched-coding.txt
- reference for various scheduler-related methods in the O(1) scheduler.
sched-design.txt
- goals, design and implementation of the Linux O(1) scheduler.
sched-design-CFS.txt
- goals, design and implementation of the Complete Fair Scheduler.
sched-domains.txt
- information on scheduling domains.
sched-nice-design.txt
- How and why the scheduler's nice levels are implemented.
sched-stats.txt
- information on schedstats (Linux Scheduler Statistics).

0
Documentation/sched-arch.txt → Documentation/scheduler/sched-arch.txt
View File

0
Documentation/sched-coding.txt → Documentation/scheduler/sched-coding.txt
View File

0
Documentation/sched-design-CFS.txt → Documentation/scheduler/sched-design-CFS.txt
View File

0
Documentation/sched-design.txt → Documentation/scheduler/sched-design.txt
View File

0
Documentation/sched-domains.txt → Documentation/scheduler/sched-domains.txt
View File

0
Documentation/sched-nice-design.txt → Documentation/scheduler/sched-nice-design.txt
View File

0
Documentation/sched-stats.txt → Documentation/scheduler/sched-stats.txt
View File

41
Documentation/scsi/ChangeLog.arcmsr
View File

@ -68,4 +68,45 @@
** 2. modify the arcmsr_pci_slot_reset function
** 3. modify the arcmsr_pci_ers_disconnect_forepart function
** 4. modify the arcmsr_pci_ers_need_reset_forepart function
** 1.20.00.15 09/27/2007 Erich Chen & Nick Cheng
** 1. add arcmsr_enable_eoi_mode() on adapter Type B
** 2. add readl(reg->iop2drv_doorbell_reg) in arcmsr_handle_hbb_isr()
** in case of the doorbell interrupt clearance is cached
** 1.20.00.15 10/01/2007 Erich Chen & Nick Cheng
** 1. modify acb->devstate[i][j]
** as ARECA_RAID_GOOD instead of
** ARECA_RAID_GONE in arcmsr_alloc_ccb_pool
** 1.20.00.15 11/06/2007 Erich Chen & Nick Cheng
** 1. add conditional declaration for
** arcmsr_pci_error_detected() and
** arcmsr_pci_slot_reset
** 1.20.00.15 11/23/2007 Erich Chen & Nick Cheng
** 1.check if the sg list member number
** exceeds arcmsr default limit in arcmsr_build_ccb()
** 2.change the returned value type of arcmsr_build_ccb()
** from "void" to "int"
** 3.add the conditional check if arcmsr_build_ccb()
** returns FAILED
** 1.20.00.15 12/04/2007 Erich Chen & Nick Cheng
** 1. modify arcmsr_drain_donequeue() to ignore unknown
** command and let kernel process command timeout.
** This could handle IO request violating max. segments
** while Linux XFS over DM-CRYPT.
** Thanks to Milan Broz's comments <mbroz@redhat.com>
** 1.20.00.15 12/24/2007 Erich Chen & Nick Cheng
** 1.fix the portability problems
** 2.fix type B where we should _not_ iounmap() acb->pmu;
** it's not ioremapped.
** 3.add return -ENOMEM if ioremap() fails
** 4.transfer IS_SG64_ADDR w/ cpu_to_le32()
** in arcmsr_build_ccb
** 5. modify acb->devstate[i][j] as ARECA_RAID_GONE instead of
** ARECA_RAID_GOOD in arcmsr_alloc_ccb_pool()
** 6.fix arcmsr_cdb->Context as (unsigned long)arcmsr_cdb
** 7.add the checking state of
** (outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT) == 0
** in arcmsr_handle_hba_isr
** 8.replace pci_alloc_consistent()/pci_free_consistent() with kmalloc()/kfree() in arcmsr_iop_message_xfer()
** 9. fix the release of dma memory for type B in arcmsr_free_ccb_pool()
** 10.fix the arcmsr_polling_hbb_ccbdone()
**************************************************************************

2
Documentation/scsi/scsi_mid_low_api.txt
View File

@ -1407,7 +1407,7 @@ Credits
=======
The following people have contributed to this document:
Mike Anderson <andmike at us dot ibm dot com>
James Bottomley <James dot Bottomley at steeleye dot com>
James Bottomley <James dot Bottomley at hansenpartnership dot com>
Patrick Mansfield <patmans at us dot ibm dot com>
Christoph Hellwig <hch at infradead dot org>
Doug Ledford <dledford at redhat dot com>

10
Documentation/sysctl/fs.txt
View File

@ -23,6 +23,7 @@ Currently, these files are in /proc/sys/fs:
- inode-max
- inode-nr
- inode-state
- nr_open
- overflowuid
- overflowgid
- suid_dumpable
@ -91,6 +92,15 @@ usage of file handles and you don't need to increase the maximum.
==============================================================
nr_open:
This denotes the maximum number of file-handles a process can
allocate. Default value is 1024*1024 (1048576) which should be
enough for most machines. Actual limit depends on RLIMIT_NOFILE
resource limit.
==============================================================
inode-max, inode-nr & inode-state:
As with file handles, the kernel allocates the inode structures

31
Documentation/sysctl/kernel.txt
View File

@ -29,7 +29,7 @@ show up in /proc/sys/kernel:
- java-interpreter [ binfmt_java, obsolete ]
- kstack_depth_to_print [ X86 only ]
- l2cr [ PPC only ]
- modprobe ==> Documentation/kmod.txt
- modprobe ==> Documentation/debugging-modules.txt
- msgmax
- msgmnb
- msgmni
@ -41,6 +41,7 @@ show up in /proc/sys/kernel:
- pid_max
- powersave-nap [ PPC only ]
- printk
- randomize_va_space
- real-root-dev ==> Documentation/initrd.txt
- reboot-cmd [ SPARC only ]
- rtsig-max
@ -280,6 +281,34 @@ send before ratelimiting kicks in.
==============================================================
randomize-va-space:
This option can be used to select the type of process address
space randomization that is used in the system, for architectures
that support this feature.
0 - Turn the process address space randomization off by default.
1 - Make the addresses of mmap base, stack and VDSO page randomized.
This, among other things, implies that shared libraries will be
loaded to random addresses. Also for PIE-linked binaries, the location
of code start is randomized.
With heap randomization, the situation is a little bit more
complicated.
There a few legacy applications out there (such as some ancient
versions of libc.so.5 from 1996) that assume that brk area starts
just after the end of the code+bss. These applications break when
start of the brk area is randomized. There are however no known
non-legacy applications that would be broken this way, so for most
systems it is safe to choose full randomization. However there is
a CONFIG_COMPAT_BRK option for systems with ancient and/or broken
binaries, that makes heap non-randomized, but keeps all other
parts of process address space randomized if randomize_va_space
sysctl is turned on.
==============================================================
reboot-cmd: (Sparc only)
??? This seems to be a way to give an argument to the Sparc

22
Documentation/sysctl/vm.txt
View File

@ -32,6 +32,7 @@ Currently, these files are in /proc/sys/vm:
- min_unmapped_ratio
- min_slab_ratio
- panic_on_oom
- oom_dump_tasks
- oom_kill_allocating_task
- mmap_min_address
- numa_zonelist_order
@ -232,6 +233,27 @@ according to your policy of failover.
=============================================================
oom_dump_tasks
Enables a system-wide task dump (excluding kernel threads) to be
produced when the kernel performs an OOM-killing and includes such
information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and
name. This is helpful to determine why the OOM killer was invoked
and to identify the rogue task that caused it.
If this is set to zero, this information is suppressed. On very
large systems with thousands of tasks it may not be feasible to dump
the memory state information for each one. Such systems should not
be forced to incur a performance penalty in OOM conditions when the
information may not be desired.
If this is set to non-zero, this information is shown whenever the
OOM killer actually kills a memory-hogging task.
The default value is 0.
=============================================================
oom_kill_allocating_task
This enables or disables killing the OOM-triggering task in

245
Documentation/thermal/sysfs-api.txt Normal file
View File

@ -0,0 +1,245 @@
Generic Thermal Sysfs driver How To
=========================
Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
Updated: 2 January 2008
Copyright (c) 2008 Intel Corporation
0. Introduction
The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
and thermal cooling devices (fan, processor...) to register with the thermal management
solution and to be a part of it.
This how-to focuses on enabling new thermal zone and cooling devices to participate
in thermal management.
This solution is platform independent and any type of thermal zone devices and
cooling devices should be able to make use of the infrastructure.
The main task of the thermal sysfs driver is to expose thermal zone attributes as well
as cooling device attributes to the user space.
An intelligent thermal management application can make decisions based on inputs
from thermal zone attributes (the current temperature and trip point temperature)
and throttle appropriate devices.
[0-*] denotes any positive number starting from 0
[1-*] denotes any positive number starting from 1
1. thermal sysfs driver interface functions
1.1 thermal zone device interface
1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
void *devdata, struct thermal_zone_device_ops *ops)
This interface function adds a new thermal zone device (sensor) to
/sys/class/thermal folder as thermal_zone[0-*].
It tries to bind all the thermal cooling devices registered at the same time.
name: the thermal zone name.
trips: the total number of trip points this thermal zone supports.
devdata: device private data
ops: thermal zone device call-backs.
.bind: bind the thermal zone device with a thermal cooling device.
.unbind: unbind the thermal zone device with a thermal cooling device.
.get_temp: get the current temperature of the thermal zone.
.get_mode: get the current mode (user/kernel) of the thermal zone.
"kernel" means thermal management is done in kernel.
"user" will prevent kernel thermal driver actions upon trip points
so that user applications can take charge of thermal management.
.set_mode: set the mode (user/kernel) of the thermal zone.
.get_trip_type: get the type of certain trip point.
.get_trip_temp: get the temperature above which the certain trip point
will be fired.
1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
This interface function removes the thermal zone device.
It deletes the corresponding entry form /sys/class/thermal folder and unbind all
the thermal cooling devices it uses.
1.2 thermal cooling device interface
1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
void *devdata, struct thermal_cooling_device_ops *)
This interface function adds a new thermal cooling device (fan/processor/...) to
/sys/class/thermal/ folder as cooling_device[0-*].
It tries to bind itself to all the thermal zone devices register at the same time.
name: the cooling device name.
devdata: device private data.
ops: thermal cooling devices call-backs.
.get_max_state: get the Maximum throttle state of the cooling device.
.get_cur_state: get the Current throttle state of the cooling device.
.set_cur_state: set the Current throttle state of the cooling device.
1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
This interface function remove the thermal cooling device.
It deletes the corresponding entry form /sys/class/thermal folder and unbind
itself from all the thermal zone devices using it.
1.3 interface for binding a thermal zone device with a thermal cooling device
1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
int trip, struct thermal_cooling_device *cdev);
This interface function bind a thermal cooling device to the certain trip point
of a thermal zone device.
This function is usually called in the thermal zone device .bind callback.
tz: the thermal zone device
cdev: thermal cooling device
trip: indicates which trip point the cooling devices is associated with
in this thermal zone.
1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
int trip, struct thermal_cooling_device *cdev);
This interface function unbind a thermal cooling device from the certain trip point
of a thermal zone device.
This function is usually called in the thermal zone device .unbind callback.
tz: the thermal zone device
cdev: thermal cooling device
trip: indicates which trip point the cooling devices is associated with
in this thermal zone.
2. sysfs attributes structure
RO read only value
RW read/write value
All thermal sysfs attributes will be represented under /sys/class/thermal
Thermal zone device sys I/F, created once it's registered:
|thermal_zone[0-*]:
|-----type: Type of the thermal zone
|-----temp: Current temperature
|-----mode: Working mode of the thermal zone
|-----trip_point_[0-*]_temp: Trip point temperature
|-----trip_point_[0-*]_type: Trip point type
Thermal cooling device sys I/F, created once it's registered:
|cooling_device[0-*]:
|-----type : Type of the cooling device(processor/fan/...)
|-----max_state: Maximum cooling state of the cooling device
|-----cur_state: Current cooling state of the cooling device
These two dynamic attributes are created/removed in pairs.
They represent the relationship between a thermal zone and its associated cooling device.
They are created/removed for each
thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
|thermal_zone[0-*]
|-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone
|-----cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with
***************************
* Thermal zone attributes *
***************************
type Strings which represent the thermal zone type.
This is given by thermal zone driver as part of registration.
Eg: "ACPI thermal zone" indicates it's a ACPI thermal device
RO
Optional
temp Current temperature as reported by thermal zone (sensor)
Unit: degree Celsius
RO
Required
mode One of the predefined values in [kernel, user]
This file gives information about the algorithm
that is currently managing the thermal zone.
It can be either default kernel based algorithm
or user space application.
RW
Optional
kernel = Thermal management in kernel thermal zone driver.
user = Preventing kernel thermal zone driver actions upon
trip points so that user application can take full
charge of the thermal management.
trip_point_[0-*]_temp The temperature above which trip point will be fired
Unit: degree Celsius
RO
Optional
trip_point_[0-*]_type Strings which indicate the type of the trip point
E.g. it can be one of critical, hot, passive,
active[0-*] for ACPI thermal zone.
RO
Optional
cdev[0-*] Sysfs link to the thermal cooling device node where the sys I/F
for cooling device throttling control represents.
RO
Optional
cdev[0-*]_trip_point The trip point with which cdev[0-*] is associated in this thermal zone
-1 means the cooling device is not associated with any trip point.
RO
Optional
******************************
* Cooling device attributes *
******************************
type String which represents the type of device
eg: For generic ACPI: this should be "Fan",
"Processor" or "LCD"
eg. For memory controller device on intel_menlow platform:
this should be "Memory controller"
RO
Optional
max_state The maximum permissible cooling state of this cooling device.
RO
Required
cur_state The current cooling state of this cooling device.
the value can any integer numbers between 0 and max_state,
cur_state == 0 means no cooling
cur_state == max_state means the maximum cooling.
RW
Required
3. A simple implementation
ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all.
It has one processor and one fan, which are both registered as thermal_cooling_device.
If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
the sys I/F structure will be built like this:
/sys/class/thermal:
|thermal_zone1:
|-----type: ACPI thermal zone
|-----temp: 37
|-----mode: kernel
|-----trip_point_0_temp: 100
|-----trip_point_0_type: critical
|-----trip_point_1_temp: 80
|-----trip_point_1_type: passive
|-----trip_point_2_temp: 70
|-----trip_point_2_type: active[0]
|-----trip_point_3_temp: 60
|-----trip_point_3_type: active[1]
|-----cdev0: --->/sys/class/thermal/cooling_device0
|-----cdev0_trip_point: 1 /* cdev0 can be used for passive */
|-----cdev1: --->/sys/class/thermal/cooling_device3
|-----cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/
|cooling_device0:
|-----type: Processor
|-----max_state: 8
|-----cur_state: 0
|cooling_device3:
|-----type: Fan
|-----max_state: 2
|-----cur_state: 0

226
Documentation/unaligned-memory-access.txt Normal file
View File

@ -0,0 +1,226 @@
UNALIGNED MEMORY ACCESSES
=========================
Linux runs on a wide variety of architectures which have varying behaviour
when it comes to memory access. This document presents some details about
unaligned accesses, why you need to write code that doesn't cause them,
and how to write such code!
The definition of an unaligned access
=====================================
Unaligned memory accesses occur when you try to read N bytes of data starting
from an address that is not evenly divisible by N (i.e. addr % N != 0).
For example, reading 4 bytes of data from address 0x10004 is fine, but
reading 4 bytes of data from address 0x10005 would be an unaligned memory
access.
The above may seem a little vague, as memory access can happen in different
ways. The context here is at the machine code level: certain instructions read
or write a number of bytes to or from memory (e.g. movb, movw, movl in x86
assembly). As will become clear, it is relatively easy to spot C statements
which will compile to multiple-byte memory access instructions, namely when
dealing with types such as u16, u32 and u64.
Natural alignment
=================
The rule mentioned above forms what we refer to as natural alignment:
When accessing N bytes of memory, the base memory address must be evenly
divisible by N, i.e. addr % N == 0.
When writing code, assume the target architecture has natural alignment
requirements.
In reality, only a few architectures require natural alignment on all sizes
of memory access. However, we must consider ALL supported architectures;
writing code that satisfies natural alignment requirements is the easiest way
to achieve full portability.
Why unaligned access is bad
===========================
The effects of performing an unaligned memory access vary from architecture
to architecture. It would be easy to write a whole document on the differences
here; a summary of the common scenarios is presented below:
- Some architectures are able to perform unaligned memory accesses
transparently, but there is usually a significant performance cost.
- Some architectures raise processor exceptions when unaligned accesses
happen. The exception handler is able to correct the unaligned access,
at significant cost to performance.
- Some architectures raise processor exceptions when unaligned accesses
happen, but the exceptions do not contain enough information for the
unaligned access to be corrected.
- Some architectures are not capable of unaligned memory access, but will
silently perform a different memory access to the one that was requested,
resulting a a subtle code bug that is hard to detect!
It should be obvious from the above that if your code causes unaligned
memory accesses to happen, your code will not work correctly on certain
platforms and will cause performance problems on others.
Code that does not cause unaligned access
=========================================
At first, the concepts above may seem a little hard to relate to actual
coding practice. After all, you don't have a great deal of control over
memory addresses of certain variables, etc.
Fortunately things are not too complex, as in most cases, the compiler
ensures that things will work for you. For example, take the following
structure:
struct foo {
u16 field1;
u32 field2;
u8 field3;
};
Let us assume that an instance of the above structure resides in memory
starting at address 0x10000. With a basic level of understanding, it would
not be unreasonable to expect that accessing field2 would cause an unaligned
access. You'd be expecting field2 to be located at offset 2 bytes into the
structure, i.e. address 0x10002, but that address is not evenly divisible
by 4 (remember, we're reading a 4 byte value here).
Fortunately, the compiler understands the alignment constraints, so in the
above case it would insert 2 bytes of padding in between field1 and field2.
Therefore, for standard structure types you can always rely on the compiler
to pad structures so that accesses to fields are suitably aligned (assuming
you do not cast the field to a type of different length).
Similarly, you can also rely on the compiler to align variables and function
parameters to a naturally aligned scheme, based on the size of the type of
the variable.
At this point, it should be clear that accessing a single byte (u8 or char)
will never cause an unaligned access, because all memory addresses are evenly
divisible by one.
On a related topic, with the above considerations in mind you may observe
that you could reorder the fields in the structure in order to place fields
where padding would otherwise be inserted, and hence reduce the overall
resident memory size of structure instances. The optimal layout of the
above example is:
struct foo {
u32 field2;
u16 field1;
u8 field3;
};
For a natural alignment scheme, the compiler would only have to add a single
byte of padding at the end of the structure. This padding is added in order
to satisfy alignment constraints for arrays of these structures.
Another point worth mentioning is the use of __attribute__((packed)) on a
structure type. This GCC-specific attribute tells the compiler never to
insert any padding within structures, useful when you want to use a C struct
to represent some data that comes in a fixed arrangement 'off the wire'.
You might be inclined to believe that usage of this attribute can easily
lead to unaligned accesses when accessing fields that do not satisfy
architectural alignment requirements. However, again, the compiler is aware
of the alignment constraints and will generate extra instructions to perform
the memory access in a way that does not cause unaligned access. Of course,
the extra instructions obviously cause a loss in performance compared to the
non-packed case, so the packed attribute should only be used when avoiding
structure padding is of importance.
Code that causes unaligned access
=================================
With the above in mind, let's move onto a real life example of a function
that can cause an unaligned memory access. The following function adapted
from include/linux/etherdevice.h is an optimized routine to compare two
ethernet MAC addresses for equality.
unsigned int compare_ether_addr(const u8 *addr1, const u8 *addr2)
{
const u16 *a = (const u16 *) addr1;
const u16 *b = (const u16 *) addr2;
return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0;
}
In the above function, the reference to a[0] causes 2 bytes (16 bits) to
be read from memory starting at address addr1. Think about what would happen
if addr1 was an odd address such as 0x10003. (Hint: it'd be an unaligned
access.)
Despite the potential unaligned access problems with the above function, it
is included in the kernel anyway but is understood to only work on
16-bit-aligned addresses. It is up to the caller to ensure this alignment or
not use this function at all. This alignment-unsafe function is still useful
as it is a decent optimization for the cases when you can ensure alignment,
which is true almost all of the time in ethernet networking context.
Here is another example of some code that could cause unaligned accesses:
void myfunc(u8 *data, u32 value)
{
[...]
*((u32 *) data) = cpu_to_le32(value);
[...]
}
This code will cause unaligned accesses every time the data parameter points
to an address that is not evenly divisible by 4.
In summary, the 2 main scenarios where you may run into unaligned access
problems involve:
1. Casting variables to types of different lengths
2. Pointer arithmetic followed by access to at least 2 bytes of data
Avoiding unaligned accesses
===========================
The easiest way to avoid unaligned access is to use the get_unaligned() and
put_unaligned() macros provided by the <asm/unaligned.h> header file.
Going back to an earlier example of code that potentially causes unaligned
access:
void myfunc(u8 *data, u32 value)
{
[...]
*((u32 *) data) = cpu_to_le32(value);
[...]
}
To avoid the unaligned memory access, you would rewrite it as follows:
void myfunc(u8 *data, u32 value)
{
[...]
value = cpu_to_le32(value);
put_unaligned(value, (u32 *) data);
[...]
}
The get_unaligned() macro works similarly. Assuming 'data' is a pointer to
memory and you wish to avoid unaligned access, its usage is as follows:
u32 value = get_unaligned((u32 *) data);
These macros work work for memory accesses of any length (not just 32 bits as
in the examples above). Be aware that when compared to standard access of
aligned memory, using these macros to access unaligned memory can be costly in
terms of performance.
If use of such macros is not convenient, another option is to use memcpy(),
where the source or destination (or both) are of type u8* or unsigned char*.
Due to the byte-wise nature of this operation, unaligned accesses are avoided.
--
Author: Daniel Drake <dsd@gentoo.org>
With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt,
Johannes Berg, Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock,
Uli Kunitz, Vadim Lobanov

149
Documentation/vm/slabinfo.c
View File

@ -32,6 +32,13 @@ struct slabinfo {
int sanity_checks, slab_size, store_user, trace;
int order, poison, reclaim_account, red_zone;
unsigned long partial, objects, slabs;
unsigned long alloc_fastpath, alloc_slowpath;
unsigned long free_fastpath, free_slowpath;
unsigned long free_frozen, free_add_partial, free_remove_partial;
unsigned long alloc_from_partial, alloc_slab, free_slab, alloc_refill;
unsigned long cpuslab_flush, deactivate_full, deactivate_empty;
unsigned long deactivate_to_head, deactivate_to_tail;
unsigned long deactivate_remote_frees;
int numa[MAX_NODES];
int numa_partial[MAX_NODES];
} slabinfo[MAX_SLABS];
@ -64,8 +71,10 @@ int show_inverted = 0;
int show_single_ref = 0;
int show_totals = 0;
int sort_size = 0;
int sort_active = 0;
int set_debug = 0;
int show_ops = 0;
int show_activity = 0;
/* Debug options */
int sanity = 0;
@ -93,8 +102,10 @@ void usage(void)
printf("slabinfo 5/7/2007. (c) 2007 sgi. clameter@sgi.com\n\n"
"slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n"
"-a|--aliases Show aliases\n"
"-A|--activity Most active slabs first\n"
"-d<options>|--debug=<options> Set/Clear Debug options\n"
"-e|--empty Show empty slabs\n"
"-D|--display-active Switch line format to activity\n"
"-e|--empty Show empty slabs\n"
"-f|--first-alias Show first alias\n"
"-h|--help Show usage information\n"
"-i|--inverted Inverted list\n"
@ -281,8 +292,11 @@ int line = 0;
void first_line(void)
{
printf("Name Objects Objsize Space "
"Slabs/Part/Cpu O/S O %%Fr %%Ef Flg\n");
if (show_activity)
printf("Name Objects Alloc Free %%Fast\n");
else
printf("Name Objects Objsize Space "
"Slabs/Part/Cpu O/S O %%Fr %%Ef Flg\n");
}
/*
@ -309,6 +323,12 @@ unsigned long slab_size(struct slabinfo *s)
return s->slabs * (page_size << s->order);
}
unsigned long slab_activity(struct slabinfo *s)
{
return s->alloc_fastpath + s->free_fastpath +
s->alloc_slowpath + s->free_slowpath;
}
void slab_numa(struct slabinfo *s, int mode)
{
int node;
@ -392,6 +412,71 @@ const char *onoff(int x)
return "Off";
}
void slab_stats(struct slabinfo *s)
{
unsigned long total_alloc;
unsigned long total_free;
unsigned long total;
if (!s->alloc_slab)
return;
total_alloc = s->alloc_fastpath + s->alloc_slowpath;
total_free = s->free_fastpath + s->free_slowpath;
if (!total_alloc)
return;
printf("\n");
printf("Slab Perf Counter Alloc Free %%Al %%Fr\n");
printf("--------------------------------------------------\n");
printf("Fastpath %8lu %8lu %3lu %3lu\n",
s->alloc_fastpath, s->free_fastpath,
s->alloc_fastpath * 100 / total_alloc,
s->free_fastpath * 100 / total_free);
printf("Slowpath %8lu %8lu %3lu %3lu\n",
total_alloc - s->alloc_fastpath, s->free_slowpath,
(total_alloc - s->alloc_fastpath) * 100 / total_alloc,
s->free_slowpath * 100 / total_free);
printf("Page Alloc %8lu %8lu %3lu %3lu\n",
s->alloc_slab, s->free_slab,
s->alloc_slab * 100 / total_alloc,
s->free_slab * 100 / total_free);
printf("Add partial %8lu %8lu %3lu %3lu\n",
s->deactivate_to_head + s->deactivate_to_tail,
s->free_add_partial,
(s->deactivate_to_head + s->deactivate_to_tail) * 100 / total_alloc,
s->free_add_partial * 100 / total_free);
printf("Remove partial %8lu %8lu %3lu %3lu\n",
s->alloc_from_partial, s->free_remove_partial,
s->alloc_from_partial * 100 / total_alloc,
s->free_remove_partial * 100 / total_free);
printf("RemoteObj/SlabFrozen %8lu %8lu %3lu %3lu\n",
s->deactivate_remote_frees, s->free_frozen,
s->deactivate_remote_frees * 100 / total_alloc,
s->free_frozen * 100 / total_free);
printf("Total %8lu %8lu\n\n", total_alloc, total_free);
if (s->cpuslab_flush)
printf("Flushes %8lu\n", s->cpuslab_flush);
if (s->alloc_refill)
printf("Refill %8lu\n", s->alloc_refill);
total = s->deactivate_full + s->deactivate_empty +
s->deactivate_to_head + s->deactivate_to_tail;
if (total)
printf("Deactivate Full=%lu(%lu%%) Empty=%lu(%lu%%) "
"ToHead=%lu(%lu%%) ToTail=%lu(%lu%%)\n",
s->deactivate_full, (s->deactivate_full * 100) / total,
s->deactivate_empty, (s->deactivate_empty * 100) / total,
s->deactivate_to_head, (s->deactivate_to_head * 100) / total,
s->deactivate_to_tail, (s->deactivate_to_tail * 100) / total);
}
void report(struct slabinfo *s)
{
if (strcmp(s->name, "*") == 0)
@ -430,6 +515,7 @@ void report(struct slabinfo *s)
ops(s);
show_tracking(s);
slab_numa(s, 1);
slab_stats(s);
}
void slabcache(struct slabinfo *s)
@ -479,13 +565,27 @@ void slabcache(struct slabinfo *s)
*p++ = 'T';
*p = 0;
printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n",
s->name, s->objects, s->object_size, size_str, dist_str,
s->objs_per_slab, s->order,
s->slabs ? (s->partial * 100) / s->slabs : 100,
s->slabs ? (s->objects * s->object_size * 100) /
(s->slabs * (page_size << s->order)) : 100,
flags);
if (show_activity) {
unsigned long total_alloc;
unsigned long total_free;
total_alloc = s->alloc_fastpath + s->alloc_slowpath;
total_free = s->free_fastpath + s->free_slowpath;
printf("%-21s %8ld %8ld %8ld %3ld %3ld \n",
s->name, s->objects,
total_alloc, total_free,
total_alloc ? (s->alloc_fastpath * 100 / total_alloc) : 0,
total_free ? (s->free_fastpath * 100 / total_free) : 0);
}
else
printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n",
s->name, s->objects, s->object_size, size_str, dist_str,
s->objs_per_slab, s->order,
s->slabs ? (s->partial * 100) / s->slabs : 100,
s->slabs ? (s->objects * s->object_size * 100) /
(s->slabs * (page_size << s->order)) : 100,
flags);
}
/*
@ -892,6 +992,8 @@ void sort_slabs(void)
if (sort_size)
result = slab_size(s1) < slab_size(s2);
else if (sort_active)
result = slab_activity(s1) < slab_activity(s2);
else
result = strcasecmp(s1->name, s2->name);
@ -1074,6 +1176,23 @@ void read_slab_dir(void)
free(t);
slab->store_user = get_obj("store_user");
slab->trace = get_obj("trace");
slab->alloc_fastpath = get_obj("alloc_fastpath");
slab->alloc_slowpath = get_obj("alloc_slowpath");
slab->free_fastpath = get_obj("free_fastpath");
slab->free_slowpath = get_obj("free_slowpath");
slab->free_frozen= get_obj("free_frozen");
slab->free_add_partial = get_obj("free_add_partial");
slab->free_remove_partial = get_obj("free_remove_partial");
slab->alloc_from_partial = get_obj("alloc_from_partial");
slab->alloc_slab = get_obj("alloc_slab");
slab->alloc_refill = get_obj("alloc_refill");
slab->free_slab = get_obj("free_slab");
slab->cpuslab_flush = get_obj("cpuslab_flush");
slab->deactivate_full = get_obj("deactivate_full");
slab->deactivate_empty = get_obj("deactivate_empty");
slab->deactivate_to_head = get_obj("deactivate_to_head");
slab->deactivate_to_tail = get_obj("deactivate_to_tail");
slab->deactivate_remote_frees = get_obj("deactivate_remote_frees");
chdir("..");
if (slab->name[0] == ':')
alias_targets++;
@ -1124,7 +1243,9 @@ void output_slabs(void)
struct option opts[] = {
{ "aliases", 0, NULL, 'a' },
{ "activity", 0, NULL, 'A' },
{ "debug", 2, NULL, 'd' },
{ "display-activity", 0, NULL, 'D' },
{ "empty", 0, NULL, 'e' },
{ "first-alias", 0, NULL, 'f' },
{ "help", 0, NULL, 'h' },
@ -1149,7 +1270,7 @@ int main(int argc, char *argv[])
page_size = getpagesize();
while ((c = getopt_long(argc, argv, "ad::efhil1noprstvzTS",
while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTS",
opts, NULL)) != -1)
switch (c) {
case '1':
@ -1158,11 +1279,17 @@ int main(int argc, char *argv[])
case 'a':
show_alias = 1;
break;
case 'A':
sort_active = 1;
break;
case 'd':
set_debug = 1;
if (!debug_opt_scan(optarg))
fatal("Invalid debug option '%s'\n", optarg);
break;
case 'D':
show_activity = 1;
break;
case 'e':
show_empty = 1;
break;

2
Documentation/w1/masters/00-INDEX
View File

@ -4,3 +4,5 @@ ds2482
- The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
ds2490
- The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
w1-gpio
- GPIO 1-wire bus master driver.

33
Documentation/w1/masters/w1-gpio Normal file
View File

@ -0,0 +1,33 @@
Kernel driver w1-gpio
=====================
Author: Ville Syrjala <syrjala@sci.fi>
Description
-----------
GPIO 1-wire bus master driver. The driver uses the GPIO API to control the
wire and the GPIO pin can be specified using platform data.
Example (mach-at91)
-------------------
#include <linux/w1-gpio.h>
static struct w1_gpio_platform_data foo_w1_gpio_pdata = {
.pin = AT91_PIN_PB20,
.is_open_drain = 1,
};
static struct platform_device foo_w1_device = {
.name = "w1-gpio",
.id = -1,
.dev.platform_data = &foo_w1_gpio_pdata,
};
...
at91_set_GPIO_periph(foo_w1_gpio_pdata.pin, 1);
at91_set_multi_drive(foo_w1_gpio_pdata.pin, 1);
platform_device_register(&foo_w1_device);

112
MAINTAINERS
View File

@ -202,6 +202,13 @@ L: linux-scsi@vger.kernel.org
W: http://www.adaptec.com/
S: Supported
ACER WMI LAPTOP EXTRAS
P: Carlos Corbacho
M: carlos@strangeworlds.co.uk
L: aceracpi@googlegroups.com (subscribers-only)
W: http://code.google.com/p/aceracpi
S: Maintained
ACPI
P: Len Brown
M: len.brown@intel.com
@ -252,6 +259,13 @@ L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
S: Supported
ACPI WMI DRIVER
P: Carlos Corbacho
M: carlos@strangeworlds.co.uk
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Maintained
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
@ -338,13 +352,12 @@ S: Maintained for 2.4; PCI support for 2.6.
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
M: thomas.dahlmann@amd.com
L: info-linux@geode.amd.com
L: info-linux@geode.amd.com (subscribers-only)
S: Supported
AMD GEODE PROCESSOR/CHIPSET SUPPORT
P: Jordan Crouse
M: info-linux@geode.amd.com
L: info-linux@geode.amd.com
L: info-linux@geode.amd.com (subscribers-only)
W: http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
S: Supported
@ -675,6 +688,12 @@ W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
S: Maintained
ATMEL AT91 / AT32 SERIAL DRIVER
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
L: linux-kernel@vger.kernel.org
S: Supported
ATMEL LCDFB DRIVER
P: Nicolas Ferre
M: nicolas.ferre@atmel.com
@ -841,6 +860,12 @@ L: linux-kernel@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
S: Maintained
BLOCK2MTD DRIVER
P: Joern Engel
M: joern@lazybastard.org
L: linux-mtd@lists.infradead.org
S: Maintained
BLUETOOTH SUBSYSTEM
P: Marcel Holtmann
M: marcel@holtmann.org
@ -1148,6 +1173,8 @@ S: Orphan
CRIS PORT
P: Mikael Starvik
M: starvik@axis.com
P: Jesper Nilsson
M: jesper.nilsson@axis.com
L: dev-etrax@axis.com
W: http://developer.axis.com
S: Maintained
@ -1228,8 +1255,8 @@ W: http://linux-net.osdl.org/index.php/DCCP
S: Maintained
DECnet NETWORK LAYER
P: Patrick Caulfield
M: patrick@tykepenguin.com
P: Christine Caulfield
M: christine.caulfield@googlemail.com
W: http://linux-decnet.sourceforge.net
L: linux-decnet-user@lists.sourceforge.net
S: Maintained
@ -1291,8 +1318,8 @@ L: linux-kernel@vger.kernel.org
S: Maintained
DISTRIBUTED LOCK MANAGER
P: Patrick Caulfield
M: pcaulfie@redhat.com
P: Christine Caulfield
M: ccaulfie@redhat.com
P: David Teigland
M: teigland@redhat.com
L: cluster-devel@redhat.com
@ -1366,6 +1393,11 @@ W: http://linuxtv.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
DZ DECSTATION DZ11 SERIAL DRIVER
P: Maciej W. Rozycki
M: macro@linux-mips.org
S: Maintained
EATA-DMA SCSI DRIVER
P: Michael Neuffer
L: linux-eata@i-connect.net, linux-scsi@vger.kernel.org
@ -1584,6 +1616,7 @@ S: Maintained
FILESYSTEMS (VFS and infrastructure)
P: Alexander Viro
M: viro@zeniv.linux.org.uk
L: linux-fsdevel@vger.kernel.org
S: Maintained
FIREWIRE SUBSYSTEM (drivers/firewire, <linux/firewire*.h>)
@ -1780,6 +1813,11 @@ P: Jaroslav Kysela
M: perex@perex.cz
S: Maintained
HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
P: Carlos Corbacho
M: carlos@strangeworlds.co.uk
S: Odd Fixes
HPET: High Precision Event Timers driver (hpet.c)
P: Clemens Ladisch
M: clemens@ladisch.de
@ -2121,6 +2159,14 @@ M: acme@ghostprotocols.net
L: netdev@vger.kernel.org
S: Maintained
IPWIRELES DRIVER
P: Jiri Kosina
M: jkosina@suse.cz
P: David Sterba
M: dsterba@suse.cz
S: Maintained
T: git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git
IRDA SUBSYSTEM
P: Samuel Ortiz
M: samuel@sortiz.org
@ -2577,6 +2623,15 @@ L: linux-kernel@vger.kernel.org
W: http://www.linux-mm.org
S: Maintained
MEI MN10300/AM33 PORT
P: David Howells
M: dhowells@redhat.com
P: Koichi Yasutake
M: yasutake.koichi@jp.panasonic.com
L: linux-am33-list@redhat.com
W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
S: Maintained
MEMORY TECHNOLOGY DEVICES (MTD)
P: David Woodhouse
M: dwmw2@infradead.org
@ -2628,7 +2683,6 @@ MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
P: Pavel Pisa
M: ppisa@pikron.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://mmc.drzeus.cx/wiki/Controllers/Freescale/SDHC
S: Maintained
MOUSE AND MISC DEVICES [GENERAL]
@ -3031,8 +3085,8 @@ L: linux-abi-devel@lists.sourceforge.net
S: Maintained
PHRAM MTD DRIVER
P: Jörn Engel
M: joern@wh.fh-wedel.de
P: Joern Engel
M: joern@lazybastard.org
L: linux-mtd@lists.infradead.org
S: Maintained
@ -3208,6 +3262,11 @@ W: http://rt2x00.serialmonkey.com/
S: Maintained
F: drivers/net/wireless/rt2x00/
RAMDISK RAM BLOCK DEVICE DRIVER
P: Nick Piggin
M: npiggin@suse.de
S: Maintained
RANDOM NUMBER DRIVER
P: Matt Mackall
M: mpm@selenic.com
@ -3219,6 +3278,12 @@ M: mporter@kernel.crashing.org
L: linux-kernel@vger.kernel.org
S: Maintained
RDC R-321X SoC
P: Florian Fainelli
M: florian.fainelli@telecomint.eu
L: linux-kernel@vger.kernel.org
S: Maintained
RDC R6040 FAST ETHERNET DRIVER
P: Florian Fainelli
M: florian.fainelli@telecomint.eu
@ -3497,6 +3562,8 @@ P: Christoph Lameter
M: clameter@sgi.com
P: Pekka Enberg
M: penberg@cs.helsinki.fi
P: Matt Mackall
M: mpm@selenic.com
L: linux-mm@kvack.org
S: Maintained
@ -3562,6 +3629,13 @@ L: linux-acpi@vger.kernel.org
W: http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
S: Maintained
SONY MEMORYSTICK CARD SUPPORT
P: Alex Dubov
M: oakad@yahoo.com
L: linux-kernel@vger.kernel.org
W: http://tifmxx.berlios.de/
S: Maintained
SOUND
P: Jaroslav Kysela
M: perex@perex.cz
@ -3644,7 +3718,6 @@ SECURE DIGITAL HOST CONTROLLER INTERFACE DRIVER
P: Pierre Ossman
M: drzeus-sdhci@drzeus.cx
L: sdhci-devel@list.drzeus.cx
W: http://mmc.drzeus.cx/wiki/Linux/Drivers/sdhci
S: Maintained
SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
@ -3838,8 +3911,8 @@ L: linux-scsi@vger.kernel.org
S: Maintained
UDF FILESYSTEM
P: Ben Fennema
M: bfennema@falcon.csc.calpoly.edu
P: Jan Kara
M: jack@suse.cz
W: http://linux-udf.sourceforge.net
S: Maintained
@ -3856,6 +3929,12 @@ M: oliver@neukum.name
L: linux-usb@vger.kernel.org
S: Maintained
USB AUERSWALD DRIVER
P: Wolfgang Muees
M: wolfgang@iksw-muees.de
L: linux-usb@vger.kernel.org
S: Maintained
USB BLOCK DRIVER (UB ub)
P: Pete Zaitcev
M: zaitcev@redhat.com
@ -4006,12 +4085,6 @@ S: Maintained
W: http://geocities.com/i0xox0i
W: http://firstlight.net/cvs
USB AUERSWALD DRIVER
P: Wolfgang Muees
M: wolfgang@iksw-muees.de
L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
P: Gary Brubaker
M: xavyer@ix.netcom.com
@ -4214,7 +4287,6 @@ W83L51xD SD/MMC CARD INTERFACE DRIVER
P: Pierre Ossman
M: drzeus-wbsd@drzeus.cx
L: linux-kernel@vger.kernel.org
W: http://projects.drzeus.cx/wbsd
S: Maintained
WATCHDOG DEVICE DRIVERS

6
Makefile
View File

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 24
EXTRAVERSION =
NAME = Arr Matey! A Hairy Bilge Rat!
SUBLEVEL = 25
EXTRAVERSION = -rc2
NAME = Funky Weasel is Jiggy wit it
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"

11
REPORTING-BUGS
View File

@ -10,11 +10,12 @@ bug report. This explains what you should do with the "Oops" information
to make it useful to the recipient.
Send the output to the maintainer of the kernel area that seems to
be involved with the problem. Don't worry too much about getting the
wrong person. If you are unsure send it to the person responsible for the
code relevant to what you were doing. If it occurs repeatably try and
describe how to recreate it. That is worth even more than the oops itself.
The list of maintainers is in the MAINTAINERS file in this directory.
be involved with the problem, and cc the relevant mailing list. Don't
worry too much about getting the wrong person. If you are unsure send it
to the person responsible for the code relevant to what you were doing.
If it occurs repeatably try and describe how to recreate it. That is
worth even more than the oops itself. The list of maintainers and
mailing lists is in the MAINTAINERS file in this directory.
If it is a security bug, please copy the Security Contact listed
in the MAINTAINERS file. They can help coordinate bugfix and disclosure.

9
arch/alpha/Kconfig
View File

@ -5,6 +5,7 @@
config ALPHA
bool
default y
select HAVE_IDE
select HAVE_OPROFILE
help
The Alpha is a 64-bit general-purpose processor designed and
@ -67,6 +68,9 @@ config AUTO_IRQ_AFFINITY
depends on SMP
default y
config ARCH_SUPPORTS_AOUT
def_bool y
source "init/Kconfig"
@ -612,6 +616,11 @@ config VERBOSE_MCHECK_ON
Take the default (1) unless you want more control or more info.
config HZ
int
default 1200 if ALPHA_RAWHIDE
default 1024
source "drivers/pci/Kconfig"
source "drivers/eisa/Kconfig"

9
arch/alpha/Kconfig.debug
View File

@ -7,15 +7,6 @@ config EARLY_PRINTK
depends on ALPHA_GENERIC || ALPHA_SRM
default y
config DEBUG_RWLOCK
bool "Read-write spinlock debugging"
depends on DEBUG_KERNEL
help
If you say Y here then read-write lock processing will count how many
times it has tried to get the lock and issue an error message after
too many attempts. If you suspect a rwlock problem or a kernel
hacker asks for this option then say Y. Otherwise say N.
config ALPHA_LEGACY_START_ADDRESS
bool "Legacy kernel start address"
depends on ALPHA_GENERIC

1
arch/alpha/defconfig
View File

@ -882,7 +882,6 @@ CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_INFO=y
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_RWLOCK is not set
# CONFIG_DEBUG_SEMAPHORE is not set
CONFIG_ALPHA_LEGACY_START_ADDRESS=y
CONFIG_MATHEMU=y

3
arch/alpha/kernel/core_irongate.c
View File

@ -241,7 +241,8 @@ albacore_init_arch(void)
size / 1024);
}
#endif
reserve_bootmem_node(NODE_DATA(0), pci_mem, memtop - pci_mem);
reserve_bootmem_node(NODE_DATA(0), pci_mem, memtop -
pci_mem, BOOTMEM_DEFAULT);
printk("irongate_init_arch: temporarily reserving "
"region %08lx-%08lx for PCI\n", pci_mem, memtop - 1);
}

Some files were not shown because too many files have changed in this diff Show More