korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-14 15:54:15 +08:00
Code Issues Packages Projects Releases Wiki Activity

[PATCH] USB: Spelling fixes for drivers/usb.

Browse Source 
Here are some spelling corrections for drivers/usb.

cancelation -> cancellation
succesful -> successful
cancelation -> cancellation
decriptor -> descriptor
Initalize -> Initialize
wierd -> weird
Protocoll -> Protocol
occured -> occurred
successfull -> successful
Procesing -> Processing
devide -> divide
Isochronuous -> Isochronous
noticable -> noticeable
Basicly -> Basically
transfering -> transferring
intialize -> initialize
Incomming -> Incoming
additionnal -> additional
asume -> assume
Unfortunatly -> Unfortunately
retreive -> retrieve
tranceiver -> transceiver
Compatiblity -> Compatibility
Incorprated -> Incorporated
existance -> existence
Ununsual -> Unusual

Signed-off-by: Steven Cole <elenstev@mesatop.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Steven Cole 2005-05-03 19:07:24 -06:00 committed by Greg KH
parent 7b1cbebaa7
commit 093cf723b2
24 changed files with 34 additions and 34 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
drivers/usb/core/message.c
View File

@ -431,7 +431,7 @@ nomem:
* (2) error, where io->status is a negative errno value. The number
* of io->bytes transferred before the error is usually less
* than requested, and can be nonzero.
* (3) cancelation, a type of error with status -ECONNRESET that
* (3) cancellation, a type of error with status -ECONNRESET that
* is initiated by usb_sg_cancel().
*
* When this function returns, all memory allocated through usb_sg_init() or
@ -1282,7 +1282,7 @@ static void release_interface(struct device *dev)
* bus rwsem; usb device driver probe() methods cannot use this routine.
*
* Returns zero on success, or else the status code returned by the
* underlying call that failed. On succesful completion, each interface
* underlying call that failed. On successful completion, each interface
* in the original device configuration has been destroyed, and each one
* in the new configuration has been probed by all relevant usb device
* drivers currently known to the kernel.

6
drivers/usb/core/urb.c
View File

@ -121,7 +121,7 @@ struct urb * usb_get_urb(struct urb *urb)
* describing that request to the USB subsystem. Request completion will
* be indicated later, asynchronously, by calling the completion handler.
* The three types of completion are success, error, and unlink
* (a software-induced fault, also called "request cancelation").
* (a software-induced fault, also called "request cancellation").
*
* URBs may be submitted in interrupt context.
*
@ -170,7 +170,7 @@ struct urb * usb_get_urb(struct urb *urb)
* As of Linux 2.6, all USB endpoint transfer queues support depths greater
* than one. This was previously a HCD-specific behavior, except for ISO
* transfers. Non-isochronous endpoint queues are inactive during cleanup
* after faults (transfer errors or cancelation).
* after faults (transfer errors or cancellation).
*
* Reserved Bandwidth Transfers:
*
@ -395,7 +395,7 @@ int usb_submit_urb(struct urb *urb, int mem_flags)
*
* This routine cancels an in-progress request. URBs complete only
* once per submission, and may be canceled only once per submission.
* Successful cancelation means the requests's completion handler will
* Successful cancellation means the requests's completion handler will
* be called with a status code indicating that the request has been
* canceled (rather than any other code) and will quickly be removed
* from host controller data structures.

2
drivers/usb/gadget/ether.c
View File

@ -569,7 +569,7 @@ static const struct usb_cdc_ether_desc ether_desc = {
/* include the status endpoint if we can, even where it's optional.
* use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
* packet, to simplify cancelation; and a big transfer interval, to
* packet, to simplify cancellation; and a big transfer interval, to
* waste less bandwidth.
*
* some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even

2
drivers/usb/gadget/inode.c
View File

@ -275,7 +275,7 @@ static const char *CHIP;
*
* After opening, configure non-control endpoints. Then use normal
* stream read() and write() requests; and maybe ioctl() to get more
* precise FIFO status when recovering from cancelation.
* precise FIFO status when recovering from cancellation.
*/
static void epio_complete (struct usb_ep *ep, struct usb_request *req)

2
drivers/usb/gadget/lh7a40x_udc.c
View File

@ -705,7 +705,7 @@ void nuke(struct lh7a40x_ep *ep, int status)
done(ep, req, status);
}
/* Disable IRQ if EP is enabled (has decriptor) */
/* Disable IRQ if EP is enabled (has descriptor) */
if (ep->desc)
pio_irq_disable(ep_index(ep));
}

2
drivers/usb/gadget/serial.c
View File

@ -240,7 +240,7 @@ struct gs_dev {
struct usb_ep *dev_notify_ep; /* address of notify endpoint */
struct usb_ep *dev_in_ep; /* address of in endpoint */
struct usb_ep *dev_out_ep; /* address of out endpoint */
struct usb_endpoint_descriptor /* desciptor of notify ep */
struct usb_endpoint_descriptor /* descriptor of notify ep */
*dev_notify_ep_desc;
struct usb_endpoint_descriptor /* descriptor of in endpoint */
*dev_in_ep_desc;

2
drivers/usb/host/hc_crisv10.c
View File

@ -4329,7 +4329,7 @@ static int __init etrax_usb_hc_init(void)
bus->bus_name="ETRAX 100LX";
bus->hcpriv = hc;
/* Initalize RH to the default address.
/* Initialize RH to the default address.
And make sure that we have no status change indication */
hc->rh.numports = 2; /* The RH has two ports */
hc->rh.devnum = 1;

4
drivers/usb/host/sl811-hcd.c
View File

@ -134,7 +134,7 @@ static void port_power(struct sl811 *sl811, int is_on)
/* This is a PIO-only HCD. Queueing appends URBs to the endpoint's queue,
* and may start I/O. Endpoint queues are scanned during completion irq
* handlers (one per packet: ACK, NAK, faults, etc) and urb cancelation.
* handlers (one per packet: ACK, NAK, faults, etc) and urb cancellation.
*
* Using an external DMA engine to copy a packet at a time could work,
* though setup/teardown costs may be too big to make it worthwhile.
@ -738,7 +738,7 @@ retry:
}
#endif
/* port status seems wierd until after reset, so
/* port status seems weird until after reset, so
* force the reset and make khubd clean up later.
*/
sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)

2
drivers/usb/image/mdc800.c
View File

@ -23,7 +23,7 @@
*
*
* The driver brings the USB functions of the MDC800 to Linux.
* To use the Camera you must support the USB Protocoll of the camera
* To use the Camera you must support the USB Protocol of the camera
* to the Kernel Node.
* The Driver uses a misc device Node. Create it with :
* mknod /dev/mustek c 180 32

2
drivers/usb/input/aiptek.c
View File

@ -386,7 +386,7 @@ static int aiptek_convert_from_2s_complement(unsigned char c)
* convention above.) I therefore have taken over REL_MISC and ABS_MISC
* (for relative and absolute reports, respectively) for communicating
* Proximity. Why two events? I thought it interesting to know if the
* Proximity event occured while the tablet was in absolute or relative
* Proximity event occurred while the tablet was in absolute or relative
* mode.
*
* Other tablets use the notion of a certain minimum stylus pressure

2
drivers/usb/input/mtouchusb.c
View File

@ -32,7 +32,7 @@
* Changed reset from standard USB dev reset to vendor reset
* Changed data sent to host from compensated to raw coordinates
* Eliminated vendor/product module params
* Performed multiple successfull tests with an EXII-5010UC
* Performed multiple successful tests with an EXII-5010UC
*
* 1.5 02/27/2005 ddstreet@ieee.org
* Added module parameter to select raw or hw-calibrated coordinate reporting

2
drivers/usb/media/ov511.c
View File

@ -5041,7 +5041,7 @@ ov6xx0_configure(struct usb_ov511 *ov)
{ OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */
// { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */
{ OV511_I2C_BUS, 0x2d, 0x99 },
{ OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Procesing Parameter */
{ OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Processing Parameter */
{ OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */
{ OV511_I2C_BUS, 0x38, 0x8b },
{ OV511_I2C_BUS, 0x39, 0x40 },

2
drivers/usb/media/pwc/pwc-ctrl.c
View File

@ -1100,7 +1100,7 @@ static inline int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
unsigned char buf[4];
/* set new relative angle; angles are expressed in degrees * 100,
but cam as .5 degree resolution, hence devide by 200. Also
but cam as .5 degree resolution, hence divide by 200. Also
the angle must be multiplied by 64 before it's send to
the cam (??)
*/

6
drivers/usb/media/pwc/pwc-if.c
View File

@ -272,7 +272,7 @@ static int pwc_allocate_buffers(struct pwc_device *pdev)
return -ENXIO;
}
#endif
/* Allocate Isochronuous pipe buffers */
/* Allocate Isochronous pipe buffers */
for (i = 0; i < MAX_ISO_BUFS; i++) {
if (pdev->sbuf[i].data == NULL) {
kbuf = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
@ -850,7 +850,7 @@ static int pwc_isoc_init(struct pwc_device *pdev)
if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) {
Err("Failed to find packet size for video endpoint in current alternate setting.\n");
return -ENFILE; /* Odd error, that should be noticable */
return -ENFILE; /* Odd error, that should be noticeable */
}
/* Set alternate interface */
@ -2128,7 +2128,7 @@ static int __init usb_pwc_init(void)
if (leds[1] >= 0)
led_off = leds[1];
/* Big device node whoopla. Basicly, it allows you to assign a
/* Big device node whoopla. Basically, it allows you to assign a
device node (/dev/videoX) to a camera, based on its type
& serial number. The format is [type[.serialnumber]:]node.

2
drivers/usb/media/pwc/pwc-ioctl.h
View File

@ -75,7 +75,7 @@
#define PWC_FPS_SNAPSHOT 0x00400000
/* structure for transfering x & y coordinates */
/* structure for transferring x & y coordinates */
struct pwc_coord
{
int x, y; /* guess what */

2
drivers/usb/misc/legousbtower.c
View File

@ -859,7 +859,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
info ("udev is NULL.");
}
/* allocate memory for our device state and intialize it */
/* allocate memory for our device state and initialize it */
dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL);

8
drivers/usb/net/zd1201.c
View File

@ -183,7 +183,7 @@ static void zd1201_usbtx(struct urb *urb, struct pt_regs *regs)
return;
}
/* Incomming data */
/* Incoming data */
static void zd1201_usbrx(struct urb *urb, struct pt_regs *regs)
{
struct zd1201 *zd = urb->context;
@ -772,7 +772,7 @@ static int zd1201_net_stop(struct net_device *dev)
/*
RFC 1042 encapsulates Ethernet frames in 802.11 frames
by prefixing them with 0xaa, 0xaa, 0x03) followed by a SNAP OID of 0
(0x00, 0x00, 0x00). Zd requires an additionnal padding, copy
(0x00, 0x00, 0x00). Zd requires an additional padding, copy
of ethernet addresses, length of the standard RFC 1042 packet
and a command byte (which is nul for tx).
@ -1098,7 +1098,7 @@ static int zd1201_get_range(struct net_device *dev,
/* Little bit of magic here: we only get the quality if we poll
* for it, and we never get an actual request to trigger such
* a poll. Therefore we 'asume' that the user will soon ask for
* a poll. Therefore we 'assume' that the user will soon ask for
* the stats after asking the bssid.
*/
static int zd1201_get_wap(struct net_device *dev,
@ -1108,7 +1108,7 @@ static int zd1201_get_wap(struct net_device *dev,
unsigned char buffer[6];
if (!zd1201_getconfig(zd, ZD1201_RID_COMMSQUALITY, buffer, 6)) {
/* Unfortunatly the quality and noise reported is useless.
/* Unfortunately the quality and noise reported is useless.
they seem to be accumulators that increase until you
read them, unless we poll on a fixed interval we can't
use them

2
drivers/usb/serial/cypress_m8.c
View File

@ -234,7 +234,7 @@ static struct usb_serial_device_type cypress_hidcom_device = {
*****************************************************************************/
/* This function can either set or retreive the current serial line settings */
/* This function can either set or retrieve the current serial line settings */
static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
int parity_enable, int parity_type, int reset, int cypress_request_type)
{

4
drivers/usb/serial/ftdi_sio.c
View File

@ -76,7 +76,7 @@
* Defererence pointers after any paranoid checks, not before.
*
* (21/Jun/2003) Erik Nygren
* Added support for Home Electronics Tira-1 IR tranceiver using FT232BM chip.
* Added support for Home Electronics Tira-1 IR transceiver using FT232BM chip.
* See <http://www.home-electro.com/tira1.htm>. Only operates properly
* at 100000 and RTS-CTS, so set custom divisor mode on startup.
* Also force the Tira-1 and USB-UIRT to only use their custom baud rates.
@ -91,7 +91,7 @@
* Minor whitespace and comment changes.
*
* (12/Jun/2003) David Norwood
* Added support for USB-UIRT IR tranceiver using 8U232AM chip.
* Added support for USB-UIRT IR transceiver using 8U232AM chip.
* See <http://home.earthlink.net/~jrhees/USBUIRT/index.htm>. Only
* operates properly at 312500, so set custom divisor mode on startup.
*

2
drivers/usb/serial/ftdi_sio.h
View File

@ -136,7 +136,7 @@
/*
* Home Electronics (www.home-electro.com) USB gadgets
*/
#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR tranceiver */
#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */

2
drivers/usb/serial/io_usbvend.h
View File

@ -289,7 +289,7 @@
//
//
// Edgeport Compatiblity Descriptor
// Edgeport Compatibility Descriptor
//
// This descriptor is only returned by Edgeport-compatible devices
// supporting the EPiC spec. True ION devices do not return this

2
drivers/usb/serial/keyspan_usa90msg.h
View File

@ -19,7 +19,7 @@
This file is available under a BSD-style copyright
2. The name of InnoSys Incorprated may not be used to endorse or promote
2. The name of InnoSys Incorporated may not be used to endorse or promote
products derived from this software without specific prior written
permission.

2
drivers/usb/storage/shuttle_usbat.c
View File

@ -786,7 +786,7 @@ static int usbat_flash_check_media(struct us_data *us,
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
// Check for media existance
// Check for media existence
rc = usbat_flash_check_media_present(uio);
if (rc == USBAT_FLASH_MEDIA_NONE) {
info->sense_key = 0x02;

2
drivers/usb/storage/unusual_devs.h
View File

@ -1,5 +1,5 @@
/* Driver for USB Mass Storage compliant devices
* Ununsual Devices File
* Unusual Devices File
*
* $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $
*