From 87121ca504fd1d963a66b3fb0c72054b0fd9a177 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 7 Oct 2011 16:31:46 +0200 Subject: [PATCH 001/364] oprofile: Fix crash when unloading module (hr timer mode) Oprofile may crash in a KVM guest while unlaoding modules. This happens if oprofile_arch_init() fails and oprofile switches to the hr timer mode as a fallback. In this case oprofile_arch_exit() is called, but it never was initialized properly which causes the crash. This patch fixes this. oprofile: using timer interrupt. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] unregister_syscore_ops+0x41/0x58 PGD 41da3f067 PUD 41d80e067 PMD 0 Oops: 0002 [#1] PREEMPT SMP CPU 5 Modules linked in: oprofile(-) Pid: 2382, comm: modprobe Not tainted 3.1.0-rc7-00018-g709a39d #18 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[] [] unregister_syscore_ops+0x41/0x58 RSP: 0018:ffff88041de1de98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffffffa00060e0 RCX: dead000000200200 RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620 RBP: ffff88041de1dea8 R08: 0000000000000001 R09: 0000000000000082 R10: 0000000000000000 R11: ffff88041de1dde8 R12: 0000000000000080 R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210 FS: 00007f9ae5bef700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 000000041ca44000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2382, threadinfo ffff88041de1c000, task ffff88042db6d040) Stack: ffff88041de1deb8 ffffffffa0006770 ffff88041de1deb8 ffffffffa000251e ffff88041de1dec8 ffffffffa00022c2 ffff88041de1ded8 ffffffffa0004993 ffff88041de1df78 ffffffff81073115 656c69666f72706f 0000000000610200 Call Trace: [] op_nmi_exit+0x15/0x17 [oprofile] [] oprofile_arch_exit+0xe/0x10 [oprofile] [] oprofile_exit+0x13/0x15 [oprofile] [] sys_delete_module+0x1c3/0x22f [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b RIP [] unregister_syscore_ops+0x41/0x58 RSP CR2: 0000000000000008 ---[ end trace 06d4e95b6aa3b437 ]--- CC: stable@kernel.org # 2.6.37+ Signed-off-by: Robert Richter --- drivers/oprofile/oprof.c | 29 ++++++++++++++++++++++++----- drivers/oprofile/timer_int.c | 1 + 2 files changed, 25 insertions(+), 5 deletions(-) diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c index dccd8636095c..f8c752e408a6 100644 --- a/drivers/oprofile/oprof.c +++ b/drivers/oprofile/oprof.c @@ -239,26 +239,45 @@ int oprofile_set_ulong(unsigned long *addr, unsigned long val) return err; } +static int timer_mode; + static int __init oprofile_init(void) { int err; + /* always init architecture to setup backtrace support */ err = oprofile_arch_init(&oprofile_ops); - if (err < 0 || timer) { - printk(KERN_INFO "oprofile: using timer interrupt.\n"); + + timer_mode = err || timer; /* fall back to timer mode on errors */ + if (timer_mode) { + if (!err) + oprofile_arch_exit(); err = oprofile_timer_init(&oprofile_ops); if (err) return err; } - return oprofilefs_register(); + + err = oprofilefs_register(); + if (!err) + return 0; + + /* failed */ + if (timer_mode) + oprofile_timer_exit(); + else + oprofile_arch_exit(); + + return err; } static void __exit oprofile_exit(void) { - oprofile_timer_exit(); oprofilefs_unregister(); - oprofile_arch_exit(); + if (timer_mode) + oprofile_timer_exit(); + else + oprofile_arch_exit(); } diff --git a/drivers/oprofile/timer_int.c b/drivers/oprofile/timer_int.c index 3ef44624f510..878fba126582 100644 --- a/drivers/oprofile/timer_int.c +++ b/drivers/oprofile/timer_int.c @@ -110,6 +110,7 @@ int oprofile_timer_init(struct oprofile_operations *ops) ops->start = oprofile_hrtimer_start; ops->stop = oprofile_hrtimer_stop; ops->cpu_type = "timer"; + printk(KERN_INFO "oprofile: using timer interrupt.\n"); return 0; } From 97f7f8189fe54e3cfe324ef9ad35064f3d2d3bff Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Mon, 10 Oct 2011 16:21:10 +0200 Subject: [PATCH 002/364] oprofile, x86: Fix crash when unloading module (nmi timer mode) If oprofile uses the nmi timer interrupt there is a crash while unloading the module. The bug can be triggered with oprofile build as module and kernel parameter nolapic set. This patch fixes this. oprofile: using NMI timer interrupt. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] unregister_syscore_ops+0x41/0x58 PGD 42dbca067 PUD 41da6a067 PMD 0 Oops: 0002 [#1] PREEMPT SMP CPU 5 Modules linked in: oprofile(-) [last unloaded: oprofile] Pid: 2518, comm: modprobe Not tainted 3.1.0-rc7-00019-gb2fb49d #19 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[] [] unregister_syscore_ops+0x41/0x58 RSP: 0018:ffff88041ef71e98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffffffa0017100 RCX: dead000000200200 RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620 RBP: ffff88041ef71ea8 R08: 0000000000000001 R09: 0000000000000082 R10: 0000000000000000 R11: ffff88041ef71de8 R12: 0000000000000080 R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210 FS: 00007fc902f20700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 000000041cdb6000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2518, threadinfo ffff88041ef70000, task ffff88041d348040) Stack: ffff88041ef71eb8 ffffffffa0017790 ffff88041ef71eb8 ffffffffa0013532 ffff88041ef71ec8 ffffffffa00132d6 ffff88041ef71ed8 ffffffffa00159b2 ffff88041ef71f78 ffffffff81073115 656c69666f72706f 0000000000610200 Call Trace: [] op_nmi_exit+0x15/0x17 [oprofile] [] oprofile_arch_exit+0xe/0x10 [oprofile] [] oprofile_exit+0x1e/0x20 [oprofile] [] sys_delete_module+0x1c3/0x22f [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b RIP [] unregister_syscore_ops+0x41/0x58 RSP CR2: 0000000000000008 ---[ end trace 43a541a52956b7b0 ]--- CC: stable@kernel.org # 2.6.37+ Signed-off-by: Robert Richter --- arch/x86/oprofile/init.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/oprofile/init.c b/arch/x86/oprofile/init.c index cdfe4c54deca..f148cf652678 100644 --- a/arch/x86/oprofile/init.c +++ b/arch/x86/oprofile/init.c @@ -21,6 +21,7 @@ extern int op_nmi_timer_init(struct oprofile_operations *ops); extern void op_nmi_exit(void); extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth); +static int nmi_timer; int __init oprofile_arch_init(struct oprofile_operations *ops) { @@ -31,8 +32,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) #ifdef CONFIG_X86_LOCAL_APIC ret = op_nmi_init(ops); #endif + nmi_timer = (ret != 0); #ifdef CONFIG_X86_IO_APIC - if (ret < 0) + if (nmi_timer) ret = op_nmi_timer_init(ops); #endif ops->backtrace = x86_backtrace; @@ -44,6 +46,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) void oprofile_arch_exit(void) { #ifdef CONFIG_X86_LOCAL_APIC - op_nmi_exit(); + if (!nmi_timer) + op_nmi_exit(); #endif } From cf5f0acf3935c91379e709a71ecf68805d366659 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 13 Oct 2011 16:52:28 +0200 Subject: [PATCH 003/364] sched: Add a comment to effective_load() since it's a pain Every time I have to stare at this function I need to completely reverse engineer its workings, about time I write a comment explaining the thing. Collected bits and pieces from previous changelogs, mostly: 4be9daaa1b33701f011f4117f22dc1e45a3e6e34 83378269a5fad98f562ebc0f09c349575e6cbfe1 Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1318518057.27731.2.camel@twins Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 113 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 95 insertions(+), 18 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 5c9e67923b7c..aba20f495188 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -772,19 +772,32 @@ static void update_cfs_load(struct cfs_rq *cfs_rq, int global_update) list_del_leaf_cfs_rq(cfs_rq); } +static inline long calc_tg_weight(struct task_group *tg, struct cfs_rq *cfs_rq) +{ + long tg_weight; + + /* + * Use this CPU's actual weight instead of the last load_contribution + * to gain a more accurate current total weight. See + * update_cfs_rq_load_contribution(). + */ + tg_weight = atomic_read(&tg->load_weight); + tg_weight -= cfs_rq->load_contribution; + tg_weight += cfs_rq->load.weight; + + return tg_weight; +} + static long calc_cfs_shares(struct cfs_rq *cfs_rq, struct task_group *tg) { - long load_weight, load, shares; + long tg_weight, load, shares; + tg_weight = calc_tg_weight(tg, cfs_rq); load = cfs_rq->load.weight; - load_weight = atomic_read(&tg->load_weight); - load_weight += load; - load_weight -= cfs_rq->load_contribution; - shares = (tg->shares * load); - if (load_weight) - shares /= load_weight; + if (tg_weight) + shares /= tg_weight; if (shares < MIN_SHARES) shares = MIN_SHARES; @@ -2036,36 +2049,100 @@ static void task_waking_fair(struct task_struct *p) * Adding load to a group doesn't make a group heavier, but can cause movement * of group shares between cpus. Assuming the shares were perfectly aligned one * can calculate the shift in shares. + * + * Calculate the effective load difference if @wl is added (subtracted) to @tg + * on this @cpu and results in a total addition (subtraction) of @wg to the + * total group weight. + * + * Given a runqueue weight distribution (rw_i) we can compute a shares + * distribution (s_i) using: + * + * s_i = rw_i / \Sum rw_j (1) + * + * Suppose we have 4 CPUs and our @tg is a direct child of the root group and + * has 7 equal weight tasks, distributed as below (rw_i), with the resulting + * shares distribution (s_i): + * + * rw_i = { 2, 4, 1, 0 } + * s_i = { 2/7, 4/7, 1/7, 0 } + * + * As per wake_affine() we're interested in the load of two CPUs (the CPU the + * task used to run on and the CPU the waker is running on), we need to + * compute the effect of waking a task on either CPU and, in case of a sync + * wakeup, compute the effect of the current task going to sleep. + * + * So for a change of @wl to the local @cpu with an overall group weight change + * of @wl we can compute the new shares distribution (s'_i) using: + * + * s'_i = (rw_i + @wl) / (@wg + \Sum rw_j) (2) + * + * Suppose we're interested in CPUs 0 and 1, and want to compute the load + * differences in waking a task to CPU 0. The additional task changes the + * weight and shares distributions like: + * + * rw'_i = { 3, 4, 1, 0 } + * s'_i = { 3/8, 4/8, 1/8, 0 } + * + * We can then compute the difference in effective weight by using: + * + * dw_i = S * (s'_i - s_i) (3) + * + * Where 'S' is the group weight as seen by its parent. + * + * Therefore the effective change in loads on CPU 0 would be 5/56 (3/8 - 2/7) + * times the weight of the group. The effect on CPU 1 would be -4/56 (4/8 - + * 4/7) times the weight of the group. */ static long effective_load(struct task_group *tg, int cpu, long wl, long wg) { struct sched_entity *se = tg->se[cpu]; - if (!tg->parent) + if (!tg->parent) /* the trivial, non-cgroup case */ return wl; for_each_sched_entity(se) { - long lw, w; + long w, W; tg = se->my_q->tg; - w = se->my_q->load.weight; - /* use this cpu's instantaneous contribution */ - lw = atomic_read(&tg->load_weight); - lw -= se->my_q->load_contribution; - lw += w + wg; + /* + * W = @wg + \Sum rw_j + */ + W = wg + calc_tg_weight(tg, se->my_q); - wl += w; + /* + * w = rw_i + @wl + */ + w = se->my_q->load.weight + wl; - if (lw > 0 && wl < lw) - wl = (wl * tg->shares) / lw; + /* + * wl = S * s'_i; see (2) + */ + if (W > 0 && w < W) + wl = (w * tg->shares) / W; else wl = tg->shares; - /* zero point is MIN_SHARES */ + /* + * Per the above, wl is the new se->load.weight value; since + * those are clipped to [MIN_SHARES, ...) do so now. See + * calc_cfs_shares(). + */ if (wl < MIN_SHARES) wl = MIN_SHARES; + + /* + * wl = dw_i = S * (s'_i - s_i); see (3) + */ wl -= se->load.weight; + + /* + * Recursively apply this logic to all parent groups to compute + * the final effective load change on the root group. Since + * only the @tg group gets extra weight, all parent groups can + * only redistribute existing shares. @wl is the shift in shares + * resulting from this level per the above. + */ wg = 0; } From 461819ac8ee950ce027c72a066156a3df9e60c7e Mon Sep 17 00:00:00 2001 From: Hui Kang Date: Tue, 11 Oct 2011 23:00:59 -0400 Subject: [PATCH 004/364] sched_fair: Fix a typo in the comment describing update_sd_lb_stats Signed-off-by: Hui Kang Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1318388459-4427-1-git-send-email-hkang.sunysb@gmail.com Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index aba20f495188..7e51b5bb27cc 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -3588,7 +3588,7 @@ static bool update_sd_pick_busiest(struct sched_domain *sd, } /** - * update_sd_lb_stats - Update sched_group's statistics for load balancing. + * update_sd_lb_stats - Update sched_domain's statistics for load balancing. * @sd: sched_domain whose statistics are to be updated. * @this_cpu: Cpu for which load balance is currently performed. * @idle: Idle status of this_cpu From c6dc7f055d333ef35f397b8d7c3abcd1918bf8cb Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 6 Oct 2011 15:22:46 -0400 Subject: [PATCH 005/364] sched: Document wait_for_completion_*() return values The return-value convention for these functions varies depending on whether they're interruptible or can timeout. It can be a little confusing--document it. Signed-off-by: J. Bruce Fields Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111006192246.GB28026@fieldses.org Signed-off-by: Ingo Molnar --- kernel/sched.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index 0e9344a71be3..3d2c436959a1 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4810,6 +4810,9 @@ EXPORT_SYMBOL(wait_for_completion); * This waits for either a completion of a specific task to be signaled or for a * specified timeout to expire. The timeout is in jiffies. It is not * interruptible. + * + * The return value is 0 if timed out, and positive (at least 1, or number of + * jiffies left till timeout) if completed. */ unsigned long __sched wait_for_completion_timeout(struct completion *x, unsigned long timeout) @@ -4824,6 +4827,8 @@ EXPORT_SYMBOL(wait_for_completion_timeout); * * This waits for completion of a specific task to be signaled. It is * interruptible. + * + * The return value is -ERESTARTSYS if interrupted, 0 if completed. */ int __sched wait_for_completion_interruptible(struct completion *x) { @@ -4841,6 +4846,9 @@ EXPORT_SYMBOL(wait_for_completion_interruptible); * * This waits for either a completion of a specific task to be signaled or for a * specified timeout to expire. It is interruptible. The timeout is in jiffies. + * + * The return value is -ERESTARTSYS if interrupted, 0 if timed out, + * positive (at least 1, or number of jiffies left till timeout) if completed. */ long __sched wait_for_completion_interruptible_timeout(struct completion *x, @@ -4856,6 +4864,8 @@ EXPORT_SYMBOL(wait_for_completion_interruptible_timeout); * * This waits to be signaled for completion of a specific task. It can be * interrupted by a kill signal. + * + * The return value is -ERESTARTSYS if interrupted, 0 if completed. */ int __sched wait_for_completion_killable(struct completion *x) { @@ -4874,6 +4884,9 @@ EXPORT_SYMBOL(wait_for_completion_killable); * This waits for either a completion of a specific task to be * signaled or for a specified timeout to expire. It can be * interrupted by a kill signal. The timeout is in jiffies. + * + * The return value is -ERESTARTSYS if interrupted, 0 if timed out, + * positive (at least 1, or number of jiffies left till timeout) if completed. */ long __sched wait_for_completion_killable_timeout(struct completion *x, From 4a6184ce7a48c478dee0d8a9ed74c1fa35161858 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 6 Oct 2011 22:39:14 +0200 Subject: [PATCH 006/364] sched, rt: Provide means of disabling cross-cpu bandwidth sharing Normally the RT bandwidth scheme will share bandwidth across the entire root_domain. However sometimes its convenient to disable this sharing for debug purposes. Provide a simple feature switch to this end. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_features.h | 1 + kernel/sched_rt.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/kernel/sched_features.h b/kernel/sched_features.h index efa0a7b75dde..84802245abd2 100644 --- a/kernel/sched_features.h +++ b/kernel/sched_features.h @@ -67,3 +67,4 @@ SCHED_FEAT(NONTASK_POWER, 1) SCHED_FEAT(TTWU_QUEUE, 1) SCHED_FEAT(FORCE_SD_OVERLAP, 0) +SCHED_FEAT(RT_RUNTIME_SHARE, 1) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 056cbd2e2a27..583a1368afe6 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -560,6 +560,9 @@ static int balance_runtime(struct rt_rq *rt_rq) { int more = 0; + if (!sched_feat(RT_RUNTIME_SHARE)) + return more; + if (rt_rq->rt_time > rt_rq->rt_runtime) { raw_spin_unlock(&rt_rq->rt_runtime_lock); more = do_balance_runtime(rt_rq); From f1c6f1a7eed963ed233ba4c8b6fa8addb86c6ddc Mon Sep 17 00:00:00 2001 From: Carsten Emde Date: Wed, 26 Oct 2011 23:14:16 +0200 Subject: [PATCH 007/364] sched: Set the command name of the idle tasks in SMP kernels In UP systems, the idle task is initialized using the init_task structure from which the command name is taken (currently "swapper"). In SMP systems, one idle task per CPU is forked by the worker thread from which the task structure is copied. The command name is, therefore, "kworker/0:0" or "kworker/0:1", if not updated. Since such update was lacking, all idle tasks in SMP systems were incorrectly named. This longtime bug was not discovered immediately, because there is no /proc/0 entry - the bug only becomes apparent when tracing is enabled. This patch sets the command name of the idle tasks in SMP systems to the name that is used in the INIT_TASK structure suffixed by a slash and the number of the CPU. Signed-off-by: Carsten Emde Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111026211708.768925506@osadl.org Signed-off-by: Ingo Molnar --- include/linux/init_task.h | 4 +++- kernel/sched.c | 4 ++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 08ffab01e76c..b6e5b8b000e0 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -126,6 +126,8 @@ extern struct cred init_cred; # define INIT_PERF_EVENTS(tsk) #endif +#define INIT_TASK_COMM "swapper" + /* * INIT_TASK is used to set up the first task table, touch at * your own risk!. Base=0, limit=0x1fffff (=2MB) @@ -162,7 +164,7 @@ extern struct cred init_cred; .group_leader = &tsk, \ RCU_INIT_POINTER(.real_cred, &init_cred), \ RCU_INIT_POINTER(.cred, &init_cred), \ - .comm = "swapper", \ + .comm = INIT_TASK_COMM, \ .thread = INIT_THREAD, \ .fs = &init_fs, \ .files = &init_files, \ diff --git a/kernel/sched.c b/kernel/sched.c index 3d2c436959a1..d6b149ccf925 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -71,6 +71,7 @@ #include #include #include +#include #include #include @@ -6112,6 +6113,9 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) */ idle->sched_class = &idle_sched_class; ftrace_graph_init_idle_task(idle, cpu); +#if defined(CONFIG_SMP) + sprintf(idle->comm, "%s/%d", INIT_TASK_COMM, cpu); +#endif } /* From 57d1c0c03c6b48b2b96870d831b9ce6b917f53ac Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 7 Oct 2011 13:36:40 +0200 Subject: [PATCH 008/364] perf/x86: Fix PEBS instruction unwind Masami spotted that we always try to decode the instruction stream as 64bit instructions when running a 64bit kernel, this doesn't work for ia32-compat proglets. Use TIF_IA32 to detect if we need to use the 32bit instruction decoder. Reported-by: Masami Hiramatsu Cc: stable@kernel.org Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel_ds.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index c0d238f49db8..73da6b64f5b7 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -493,6 +493,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) unsigned long from = cpuc->lbr_entries[0].from; unsigned long old_to, to = cpuc->lbr_entries[0].to; unsigned long ip = regs->ip; + int is_64bit = 0; /* * We don't need to fixup if the PEBS assist is fault like @@ -544,7 +545,10 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) } else kaddr = (void *)to; - kernel_insn_init(&insn, kaddr); +#ifdef CONFIG_X86_64 + is_64bit = kernel_ip(to) || !test_thread_flag(TIF_IA32); +#endif + insn_init(&insn, kaddr, is_64bit); insn_get_length(&insn); to += insn.length; } while (to < ip); From 1d5f003f5a964711853514b04ddc872eec0fdc7b Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Sun, 23 Oct 2011 19:10:33 +0200 Subject: [PATCH 009/364] perf: Do not set task_ctx pointer in cpuctx if there are no events in the context Do not set task_ctx pointer during sched_in if there are no events associated with the context. Otherwise if during task execution total number of events in the system will become zero perf_event_context_sched_out() will not be called and cpuctx->task_ctx will be left with a stale value. Signed-off-by: Gleb Natapov Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111023171033.GI17571@redhat.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 0e8457da6f95..b0c1186fd97b 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -2173,7 +2173,8 @@ static void perf_event_context_sched_in(struct perf_event_context *ctx, perf_event_sched_in(cpuctx, ctx, task); - cpuctx->task_ctx = ctx; + if (ctx->nr_events) + cpuctx->task_ctx = ctx; perf_pmu_enable(ctx->pmu); perf_ctx_unlock(cpuctx, ctx); From aa2bc1ade59003a379ffc485d6da2d92ea3370a6 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 9 Nov 2011 17:56:37 +0100 Subject: [PATCH 010/364] perf: Don't use -ENOSPC for out of PMU resources People (Linus) objected to using -ENOSPC to signal not having enough resources on the PMU to satisfy the request. Use -EINVAL. Requested-by: Linus Torvalds Cc: Stephane Eranian Cc: Will Deacon Cc: Deng-Cheng Zhu Cc: David Daney Cc: Ralf Baechle Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-xv8geaz2zpbjhlx0svmpp28n@git.kernel.org [ merged to newer kernel, fixed up MIPS impact ] Signed-off-by: Ingo Molnar --- arch/arm/kernel/perf_event.c | 6 +++--- arch/mips/kernel/perf_event_mipsxx.c | 8 ++++---- arch/x86/kernel/cpu/perf_event.c | 10 +++++----- arch/x86/kernel/cpu/perf_event_p4.c | 2 +- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 24e2347be6b1..ff17b17b668e 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -347,15 +347,15 @@ validate_group(struct perf_event *event) memset(&fake_pmu, 0, sizeof(fake_pmu)); if (!validate_event(&fake_pmu, leader)) - return -ENOSPC; + return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { if (!validate_event(&fake_pmu, sibling)) - return -ENOSPC; + return -EINVAL; } if (!validate_event(&fake_pmu, event)) - return -ENOSPC; + return -EINVAL; return 0; } diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index 4f2971bcf8e5..315fc0b250f8 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -623,7 +623,7 @@ static int mipspmu_event_init(struct perf_event *event) if (!atomic_inc_not_zero(&active_events)) { if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) { atomic_dec(&active_events); - return -ENOSPC; + return -EINVAL; } mutex_lock(&pmu_reserve_mutex); @@ -732,15 +732,15 @@ static int validate_group(struct perf_event *event) memset(&fake_cpuc, 0, sizeof(fake_cpuc)); if (!validate_event(&fake_cpuc, leader)) - return -ENOSPC; + return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { if (!validate_event(&fake_cpuc, sibling)) - return -ENOSPC; + return -EINVAL; } if (!validate_event(&fake_cpuc, event)) - return -ENOSPC; + return -EINVAL; return 0; } diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 640891014b2a..ff0e8d498750 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -588,7 +588,7 @@ done: x86_pmu.put_event_constraints(cpuc, cpuc->event_list[i]); } } - return num ? -ENOSPC : 0; + return num ? -EINVAL : 0; } /* @@ -607,7 +607,7 @@ static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader, if (is_x86_event(leader)) { if (n >= max_count) - return -ENOSPC; + return -EINVAL; cpuc->event_list[n] = leader; n++; } @@ -620,7 +620,7 @@ static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader, continue; if (n >= max_count) - return -ENOSPC; + return -EINVAL; cpuc->event_list[n] = event; n++; @@ -1316,7 +1316,7 @@ static int validate_event(struct perf_event *event) c = x86_pmu.get_event_constraints(fake_cpuc, event); if (!c || !c->weight) - ret = -ENOSPC; + ret = -EINVAL; if (x86_pmu.put_event_constraints) x86_pmu.put_event_constraints(fake_cpuc, event); @@ -1341,7 +1341,7 @@ static int validate_group(struct perf_event *event) { struct perf_event *leader = event->group_leader; struct cpu_hw_events *fake_cpuc; - int ret = -ENOSPC, n; + int ret = -EINVAL, n; fake_cpuc = allocate_fake_cpuc(); if (IS_ERR(fake_cpuc)) diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index 492bf1358a7c..ef484d9d0a25 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -1268,7 +1268,7 @@ reserve: } done: - return num ? -ENOSPC : 0; + return num ? -EINVAL : 0; } static __initconst const struct x86_pmu p4_pmu = { From ed13ec58bfe0d5dc95f748e6118432cb0fa283cb Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 14 Nov 2011 10:03:25 +0100 Subject: [PATCH 011/364] perf/x86: Enable raw event access to Intel offcore events Now that the core offcore support is fixed up (thanks Stephane) and we have sane generic events utilizing them, re-enable the raw access to the feature as well. Note that it doesn't matter if you use event 0x1b7 or 0x1bb to specify an offcore event, either one works and neither guarantees you'll end up on a particular offcore MSR. Based on original patch from: Vince Weaver . Signed-off-by: Peter Zijlstra Cc: Vince Weaver . Cc: Stephane Eranian Link: http://lkml.kernel.org/r/alpine.DEB.2.00.1108031200390.703@cl320.eecs.utk.edu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index ff0e8d498750..2bda212a0010 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -312,12 +312,8 @@ int x86_setup_perfctr(struct perf_event *event) return -EOPNOTSUPP; } - /* - * Do not allow config1 (extended registers) to propagate, - * there's no sane user-space generalization yet: - */ if (attr->type == PERF_TYPE_RAW) - return 0; + return x86_pmu_extra_regs(event->attr.config, event); if (attr->type == PERF_TYPE_HW_CACHE) return set_ext_hw_attr(hwc, event); From 4dcfe1025b513c2c1da5bf5586adb0e80148f612 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 10 Nov 2011 13:01:10 +0100 Subject: [PATCH 012/364] sched: Avoid SMT siblings in select_idle_sibling() if possible Avoid select_idle_sibling() from picking a sibling thread if there's an idle core that shares cache. This fixes SMT balancing in the increasingly common case where there's a shared cache core available to balance to. Tested-by: Mike Galbraith Signed-off-by: Peter Zijlstra Cc: Suresh Siddha Link: http://lkml.kernel.org/r/1321350377.1421.55.camel@twins Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 42 ++++++++++++++++++++++++++++-------------- 1 file changed, 28 insertions(+), 14 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 7e51b5bb27cc..ba0e1f49a22f 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -2326,7 +2326,8 @@ static int select_idle_sibling(struct task_struct *p, int target) int cpu = smp_processor_id(); int prev_cpu = task_cpu(p); struct sched_domain *sd; - int i; + struct sched_group *sg; + int i, smt = 0; /* * If the task is going to be woken-up on this cpu and if it is @@ -2346,25 +2347,38 @@ static int select_idle_sibling(struct task_struct *p, int target) * Otherwise, iterate the domains and find an elegible idle cpu. */ rcu_read_lock(); +again: for_each_domain(target, sd) { - if (!(sd->flags & SD_SHARE_PKG_RESOURCES)) - break; + if (!smt && (sd->flags & SD_SHARE_CPUPOWER)) + continue; - for_each_cpu_and(i, sched_domain_span(sd), tsk_cpus_allowed(p)) { - if (idle_cpu(i)) { - target = i; - break; + if (!(sd->flags & SD_SHARE_PKG_RESOURCES)) { + if (!smt) { + smt = 1; + goto again; } + break; } - /* - * Lets stop looking for an idle sibling when we reached - * the domain that spans the current cpu and prev_cpu. - */ - if (cpumask_test_cpu(cpu, sched_domain_span(sd)) && - cpumask_test_cpu(prev_cpu, sched_domain_span(sd))) - break; + sg = sd->groups; + do { + if (!cpumask_intersects(sched_group_cpus(sg), + tsk_cpus_allowed(p))) + goto next; + + for_each_cpu(i, sched_group_cpus(sg)) { + if (!idle_cpu(i)) + goto next; + } + + target = cpumask_first_and(sched_group_cpus(sg), + tsk_cpus_allowed(p)); + goto done; +next: + sg = sg->next; + } while (sg != sd->groups); } +done: rcu_read_unlock(); return target; From fccfdc6f0d8c83c854eeb6d93aa158f0e551bd49 Mon Sep 17 00:00:00 2001 From: Paul Turner Date: Mon, 7 Nov 2011 20:26:34 -0800 Subject: [PATCH 013/364] sched: Fix buglet in return_cfs_rq_runtime() In return_cfs_rq_runtime() we want to return bandwidth when there are no remaining tasks, not "return" when this is the case. Signed-off-by: Paul Turner Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111108042736.623812423@google.com Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index ba0e1f49a22f..a78ed2736ba7 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1756,7 +1756,7 @@ static void __return_cfs_rq_runtime(struct cfs_rq *cfs_rq) static __always_inline void return_cfs_rq_runtime(struct cfs_rq *cfs_rq) { - if (!cfs_rq->runtime_enabled || !cfs_rq->nr_running) + if (!cfs_rq->runtime_enabled || cfs_rq->nr_running) return; __return_cfs_rq_runtime(cfs_rq); From 0e2a5f10fb550835e199a3b56a80ed88232188e9 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 4 Nov 2011 08:16:58 -0200 Subject: [PATCH 014/364] perf python: Fix undefined symbol problem Recently we made perf_evsel__init call hists__init, which broke the perf python binding: [root@emilia linux]# ./tools/perf/python/twatch.py Traceback (most recent call last): File "./tools/perf/python/twatch.py", line 16, in import perf ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: hists__init Fix it by moving the hists__init function to its only caller, evsel.c. This way we avoid dragging in other parts of tools/perf/util/ to the perf python binding. Cc: David Ahern Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-5nffmdt5mu6ozxgj54oi4qon@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/evsel.c | 10 ++++++++++ tools/perf/util/hist.c | 10 ---------- tools/perf/util/hist.h | 2 -- 3 files changed, 10 insertions(+), 12 deletions(-) diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index e42626422587..d7915d4e77cb 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -34,6 +34,16 @@ int __perf_evsel__sample_size(u64 sample_type) return size; } +static void hists__init(struct hists *hists) +{ + memset(hists, 0, sizeof(*hists)); + hists->entries_in_array[0] = hists->entries_in_array[1] = RB_ROOT; + hists->entries_in = &hists->entries_in_array[0]; + hists->entries_collapsed = RB_ROOT; + hists->entries = RB_ROOT; + pthread_mutex_init(&hists->lock, NULL); +} + void perf_evsel__init(struct perf_evsel *evsel, struct perf_event_attr *attr, int idx) { diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c index a36a3fa81ffb..abef2703cd24 100644 --- a/tools/perf/util/hist.c +++ b/tools/perf/util/hist.c @@ -1211,13 +1211,3 @@ size_t hists__fprintf_nr_events(struct hists *hists, FILE *fp) return ret; } - -void hists__init(struct hists *hists) -{ - memset(hists, 0, sizeof(*hists)); - hists->entries_in_array[0] = hists->entries_in_array[1] = RB_ROOT; - hists->entries_in = &hists->entries_in_array[0]; - hists->entries_collapsed = RB_ROOT; - hists->entries = RB_ROOT; - pthread_mutex_init(&hists->lock, NULL); -} diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h index c86c1d27bd1e..89289c8e935e 100644 --- a/tools/perf/util/hist.h +++ b/tools/perf/util/hist.h @@ -63,8 +63,6 @@ struct hists { struct callchain_cursor callchain_cursor; }; -void hists__init(struct hists *hists); - struct hist_entry *__hists__add_entry(struct hists *self, struct addr_location *al, struct symbol *parent, u64 period); From 47fbe53bef3b219a365ebf3eca949d6cd4c5291c Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 13 Nov 2011 10:45:27 -0700 Subject: [PATCH 015/364] perf session: Fix crash with invalid CPU list commit 5d67be9 added the option to specify a range of CPUs of interest, but does not catch an invalid CPU list: $ perf script -c foo Segmentation fault (core dumped) Cc: Anton Blanchard Link: http://lkml.kernel.org/r/1321206327-5881-1-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/session.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 85c1e6b76f0a..0f4555ce9063 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -1333,6 +1333,10 @@ int perf_session__cpu_bitmap(struct perf_session *session, } map = cpu_map__new(cpu_list); + if (map == NULL) { + pr_err("Invalid cpu_list\n"); + return -1; + } for (i = 0; i < map->nr; i++) { int cpu = map->map[i]; From 4cecf6d401a01d054afc1e5f605bcbfe553cb9b9 Mon Sep 17 00:00:00 2001 From: Salman Qazi Date: Tue, 15 Nov 2011 14:12:06 -0800 Subject: [PATCH 016/364] sched, x86: Avoid unnecessary overflow in sched_clock (Added the missing signed-off-by line) In hundreds of days, the __cycles_2_ns calculation in sched_clock has an overflow. cyc * per_cpu(cyc2ns, cpu) exceeds 64 bits, causing the final value to become zero. We can solve this without losing any precision. We can decompose TSC into quotient and remainder of division by the scale factor, and then use this to convert TSC into nanoseconds. Signed-off-by: Salman Qazi Acked-by: John Stultz Reviewed-by: Paul Turner Cc: stable@kernel.org Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111115221121.7262.88871.stgit@dungbeetle.mtv.corp.google.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/timer.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h index fa7b9176b76c..431793e5d484 100644 --- a/arch/x86/include/asm/timer.h +++ b/arch/x86/include/asm/timer.h @@ -32,6 +32,22 @@ extern int no_timer_check; * (mathieu.desnoyers@polymtl.ca) * * -johnstul@us.ibm.com "math is hard, lets go shopping!" + * + * In: + * + * ns = cycles * cyc2ns_scale / SC + * + * Although we may still have enough bits to store the value of ns, + * in some cases, we may not have enough bits to store cycles * cyc2ns_scale, + * leading to an incorrect result. + * + * To avoid this, we can decompose 'cycles' into quotient and remainder + * of division by SC. Then, + * + * ns = (quot * SC + rem) * cyc2ns_scale / SC + * = quot * cyc2ns_scale + (rem * cyc2ns_scale) / SC + * + * - sqazi@google.com */ DECLARE_PER_CPU(unsigned long, cyc2ns); @@ -41,9 +57,14 @@ DECLARE_PER_CPU(unsigned long long, cyc2ns_offset); static inline unsigned long long __cycles_2_ns(unsigned long long cyc) { + unsigned long long quot; + unsigned long long rem; int cpu = smp_processor_id(); unsigned long long ns = per_cpu(cyc2ns_offset, cpu); - ns += cyc * per_cpu(cyc2ns, cpu) >> CYC2NS_SCALE_FACTOR; + quot = (cyc >> CYC2NS_SCALE_FACTOR); + rem = cyc & ((1ULL << CYC2NS_SCALE_FACTOR) - 1); + ns += quot * per_cpu(cyc2ns, cpu) + + ((rem * per_cpu(cyc2ns, cpu)) >> CYC2NS_SCALE_FACTOR); return ns; } From 4ba7d9997869d25bd223dea7536fc1ce9fab3b3b Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 16 Nov 2011 11:09:17 +0100 Subject: [PATCH 017/364] rt2800pci: handle spurious interrupts Some devices may generate spurious interrupts, we have to handle them otherwise interrupt line will be disabled with below message and driver will not work: [ 2052.114334] irq 17: nobody cared (try booting with the "irqpoll" option) [ 2052.114339] Pid: 0, comm: swapper Tainted: P 2.6.35.6-48.fc14.x86_64 #1 [ 2052.114341] Call Trace: [ 2052.114342] [] __report_bad_irq.clone.1+0x3d/0x8b [ 2052.114349] [] note_interrupt+0x11a/0x17f [ 2052.114352] [] handle_fasteoi_irq+0xa8/0xce [ 2052.114355] [] handle_irq+0x88/0x90 [ 2052.114357] [] do_IRQ+0x5c/0xb4 [ 2052.114360] [] ret_from_intr+0x0/0x11 [ 2052.114361] [] ? native_safe_halt+0xb/0xd [ 2052.114366] [] ? need_resched+0x23/0x2d [ 2052.114367] [] default_idle+0x34/0x4f [ 2052.114370] [] cpu_idle+0xaa/0xcc [ 2052.114373] [] start_secondary+0x24d/0x28e [ 2052.114374] handlers: [ 2052.114375] [] (usb_hcd_irq+0x0/0x7c) [ 2052.114378] [] (rt2800pci_interrupt+0x0/0x18d [rt2800pci]) [ 2052.114384] Disabling IRQ #17 Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=658451 Reported-and-tested-by: Amir Hedayaty Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800pci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index da48c8ac27bd..4dc2d0f840d4 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -880,8 +880,13 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); + /* + * Some devices can generate interrupts with empty CSR register, we + * "handle" such irq's to prevent interrupt controller treat them as + * spurious interrupts and disable irq line. + */ if (!reg) - return IRQ_NONE; + return IRQ_HANDLED; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; From 23085d5796561625db4143a671f1de081f66ef08 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 16 Nov 2011 13:58:42 +0100 Subject: [PATCH 018/364] rt2x00: handle spurious pci interrupts We have documented case of very bad performance issue on rt2800pci device, because it generate spurious interrupt, what cause irq line is disabled: https://bugzilla.redhat.com/show_bug.cgi?id=658451 We already address that problem in separate patch by returning IRQ_HANDLED from interrupt handler. We think similar fix is needed for other rt2x00 PCI devices, because users report performance problems on these devices too. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2400pci.c | 2 +- drivers/net/wireless/rt2x00/rt2500pci.c | 2 +- drivers/net/wireless/rt2x00/rt61pci.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 3a6b40239bc1..676c7657f5f5 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1380,7 +1380,7 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, CSR7, reg); if (!reg) - return IRQ_NONE; + return IRQ_HANDLED; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index dcc0e1fcca77..d0b627c6c217 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1512,7 +1512,7 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, CSR7, reg); if (!reg) - return IRQ_NONE; + return IRQ_HANDLED; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index bf55b4a311e3..9d83e70f3e62 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2337,7 +2337,7 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); if (!reg && !reg_mcu) - return IRQ_NONE; + return IRQ_HANDLED; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; From 68fa64ef606bcee688fce46d07aa68f175070156 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Wed, 16 Nov 2011 23:16:15 +0100 Subject: [PATCH 019/364] rt2x00: Fix efuse EEPROM reading on PPC32. Fix __le32 to __le16 conversion of the first word of an 8-word block of EEPROM read via the efuse method. Reported-and-tested-by: Ingvar Hagelund Signed-off-by: Gertjan van Wingerde CC: Acked-by: Helmut Schaa Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 3f183a15186e..1ba079dffb11 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3771,7 +3771,7 @@ static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) /* Apparently the data is read from end to start */ rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, ®); /* The returned value is in CPU order, but eeprom is le */ - rt2x00dev->eeprom[i] = cpu_to_le32(reg); + *(u32 *)&rt2x00dev->eeprom[i] = cpu_to_le32(reg); rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, ®); *(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg); rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, ®); From 32d3a3922d617a5a685a5e2d24b20d0e88f192a9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michael=20B=C3=BCsch?= Date: Wed, 16 Nov 2011 23:48:31 +0100 Subject: [PATCH 020/364] p54spi: Add missing spin_lock_init The tx_lock is not initialized properly. Add spin_lock_init(). Signed-off-by: Michael Buesch Cc: Acked-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54spi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index f18df82eeb92..dda97c54d28f 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -656,6 +656,7 @@ static int __devinit p54spi_probe(struct spi_device *spi) init_completion(&priv->fw_comp); INIT_LIST_HEAD(&priv->tx_pending); mutex_init(&priv->mutex); + spin_lock_init(&priv->tx_lock); SET_IEEE80211_DEV(hw, &spi->dev); priv->common.open = p54spi_op_start; priv->common.stop = p54spi_op_stop; From 2d1618170eb493d18f66f2ac03775409a6fb97c6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michael=20B=C3=BCsch?= Date: Wed, 16 Nov 2011 23:55:46 +0100 Subject: [PATCH 021/364] p54spi: Fix workqueue deadlock priv->work must not be synced while priv->mutex is locked, because the mutex is taken in the work handler. Move cancel_work_sync down to after the device shutdown code. This is safe, because the work handler checks fw_state and bails out early in case of a race. Signed-off-by: Michael Buesch Cc: Acked-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index dda97c54d28f..78d0d6988553 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -588,8 +588,6 @@ static void p54spi_op_stop(struct ieee80211_hw *dev) WARN_ON(priv->fw_state != FW_STATE_READY); - cancel_work_sync(&priv->work); - p54spi_power_off(priv); spin_lock_irqsave(&priv->tx_lock, flags); INIT_LIST_HEAD(&priv->tx_pending); @@ -597,6 +595,8 @@ static void p54spi_op_stop(struct ieee80211_hw *dev) priv->fw_state = FW_STATE_OFF; mutex_unlock(&priv->mutex); + + cancel_work_sync(&priv->work); } static int __devinit p54spi_probe(struct spi_device *spi) From 91ec37cc1015220965e39bf342fb846810d19e79 Mon Sep 17 00:00:00 2001 From: Thomas Jarosch Date: Thu, 17 Nov 2011 20:31:02 +0100 Subject: [PATCH 022/364] Fix comparison using wrong pointer variable in dma debug code cppcheck reported: [lib/dma-debug.c:248] -> [lib/dma-debug.c:248]: (style) Same expression on both sides of '=='. Signed-off-by: Thomas Jarosch Signed-off-by: Joerg Roedel --- lib/dma-debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/dma-debug.c b/lib/dma-debug.c index 74c6c7fce749..fea790a2b176 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -245,7 +245,7 @@ static void put_hash_bucket(struct hash_bucket *bucket, static bool exact_match(struct dma_debug_entry *a, struct dma_debug_entry *b) { - return ((a->dev_addr == a->dev_addr) && + return ((a->dev_addr == b->dev_addr) && (a->dev == b->dev)) ? true : false; } From 648ae8e53d58ed1b667db173a2d4ff2132a3b529 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Wed, 9 Nov 2011 19:37:35 +0100 Subject: [PATCH 023/364] netfilter: ipset: suppress compile-time warnings in ip_set_hash_ipport*.c warning: 'ip_to' may be used uninitialized in this function Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_hash_ipport.c | 2 +- net/netfilter/ipset/ip_set_hash_ipportip.c | 2 +- net/netfilter/ipset/ip_set_hash_ipportnet.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c index 6ee10f5d59bd..37d667e3f6f8 100644 --- a/net/netfilter/ipset/ip_set_hash_ipport.c +++ b/net/netfilter/ipset/ip_set_hash_ipport.c @@ -158,7 +158,7 @@ hash_ipport4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipport4_elem data = { }; - u32 ip, ip_to, p = 0, port, port_to; + u32 ip, ip_to = 0, p = 0, port, port_to; u32 timeout = h->timeout; bool with_ports = false; int ret; diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c index fb90e344e907..e69e2718fbe1 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportip.c +++ b/net/netfilter/ipset/ip_set_hash_ipportip.c @@ -162,7 +162,7 @@ hash_ipportip4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipportip4_elem data = { }; - u32 ip, ip_to, p = 0, port, port_to; + u32 ip, ip_to = 0, p = 0, port, port_to; u32 timeout = h->timeout; bool with_ports = false; int ret; diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c index deb3e3dfa5fc..64199b4e93c9 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportnet.c +++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c @@ -184,7 +184,7 @@ hash_ipportnet4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipportnet4_elem data = { .cidr = HOST_MASK }; - u32 ip, ip_to, p = 0, port, port_to; + u32 ip, ip_to = 0, p = 0, port, port_to; u32 ip2_from = 0, ip2_to, ip2_last, ip2; u32 timeout = h->timeout; bool with_ports = false; From 5e2afba4ecd7931ea06e6fa116ab28e6943dbd42 Mon Sep 17 00:00:00 2001 From: Paul Guo Date: Mon, 14 Nov 2011 19:00:54 +0800 Subject: [PATCH 024/364] netfilter: possible unaligned packet header in ip_route_me_harder This patch tries to fix the following issue in netfilter: In ip_route_me_harder(), we invoke pskb_expand_head() that rellocates new header with additional head room which can break the alignment of the original packet header. In one of my NAT test case, the NIC port for internal hosts is configured with vlan and the port for external hosts is with general configuration. If we ping an external "unknown" hosts from an internal host, an icmp packet will be sent. We find that in icmp_send()->...->ip_route_me_harder()->pskb_expand_head(), hh_len=18 and current headroom (skb_headroom(skb)) of the packet is 16. After calling pskb_expand_head() the packet header becomes to be unaligned and then our system (arch/tile) panics immediately. Signed-off-by: Paul Guo Acked-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c index 9899619ab9b8..4f47e064e262 100644 --- a/net/ipv4/netfilter.c +++ b/net/ipv4/netfilter.c @@ -64,7 +64,8 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type) /* Change in oif may mean change in hh_len. */ hh_len = skb_dst(skb)->dev->hard_header_len; if (skb_headroom(skb) < hh_len && - pskb_expand_head(skb, hh_len - skb_headroom(skb), 0, GFP_ATOMIC)) + pskb_expand_head(skb, HH_DATA_ALIGN(hh_len - skb_headroom(skb)), + 0, GFP_ATOMIC)) return -1; return 0; From 904603f9b78f94d5a5fe29cf2f9694ef7f6f4420 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Thu, 17 Nov 2011 14:53:36 -0800 Subject: [PATCH 025/364] mac80211: Fix AMSDU rate printout in debugfs. It was flipped. See section 7.3.2.56 of the 802.11n spec for details. Signed-off-by: Ben Greear Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/debugfs_sta.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index c5f341798c16..3110cbdc501b 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -274,9 +274,9 @@ static ssize_t sta_ht_capa_read(struct file *file, char __user *userbuf, PRINT_HT_CAP((htc->cap & BIT(10)), "HT Delayed Block Ack"); - PRINT_HT_CAP((htc->cap & BIT(11)), "Max AMSDU length: " - "3839 bytes"); PRINT_HT_CAP(!(htc->cap & BIT(11)), "Max AMSDU length: " + "3839 bytes"); + PRINT_HT_CAP((htc->cap & BIT(11)), "Max AMSDU length: " "7935 bytes"); /* From 9c8f2c42c93f415771d6d7b87a0881ba0bb72824 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Fri, 18 Nov 2011 17:02:16 +0100 Subject: [PATCH 026/364] mac80211: Fix endian bug in radiotap header generation I intoduced this bug in commit a2fe81667410723d941a688e1958a49d67ca3346 "mac80211: Build TX radiotap header dynamically" Signed-off-by: Helmut Schaa Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/status.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/mac80211/status.c b/net/mac80211/status.c index df643cedf9b9..5533a74e9bb3 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -259,7 +259,7 @@ static void ieee80211_add_tx_radiotap_header(struct ieee80211_supported_band struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_radiotap_header *rthdr; unsigned char *pos; - __le16 txflags; + u16 txflags; rthdr = (struct ieee80211_radiotap_header *) skb_push(skb, rtap_len); @@ -289,13 +289,13 @@ static void ieee80211_add_tx_radiotap_header(struct ieee80211_supported_band txflags = 0; if (!(info->flags & IEEE80211_TX_STAT_ACK) && !is_multicast_ether_addr(hdr->addr1)) - txflags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL); + txflags |= IEEE80211_RADIOTAP_F_TX_FAIL; if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) - txflags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS); + txflags |= IEEE80211_RADIOTAP_F_TX_CTS; else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) - txflags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS); + txflags |= IEEE80211_RADIOTAP_F_TX_RTS; put_unaligned_le16(txflags, pos); pos += 2; From de3584bd62d87b4c250129fbc46ca52c80330add Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 21 Nov 2011 10:44:00 +0100 Subject: [PATCH 027/364] cfg80211: fix regulatory NULL dereference By the time userspace returns with a response to the regulatory domain request, the wiphy causing the request might have gone away. If this is so, reject the update but mark the request as having been processed anyway. Cc: Luis R. Rodriguez Signed-off-by: Johannes Berg Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- net/wireless/reg.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index bc1ec2c26fd0..186b7f2a27b6 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2035,6 +2035,10 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) } request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + if (!request_wiphy) { + reg_set_request_processed(); + return -ENODEV; + } if (!last_request->intersect) { int r; From 40f9cd299a0e5e8dcdde9b5eb9bfda1cb9109f61 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 21 Nov 2011 17:47:13 +0300 Subject: [PATCH 028/364] prism54: potential memory corruption in prism54_get_essid() "dwrq->length" is the capped version of "essid->length". Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville --- drivers/net/wireless/prism54/isl_ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index d97a2caf582b..bc2ba80c47bb 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -778,7 +778,7 @@ prism54_get_essid(struct net_device *ndev, struct iw_request_info *info, dwrq->flags = 0; dwrq->length = 0; } - essid->octets[essid->length] = '\0'; + essid->octets[dwrq->length] = '\0'; memcpy(extra, essid->octets, dwrq->length); kfree(essid); From ba9bb431d3156a1c5d4d6f0b8c23b5792e9e9f4f Mon Sep 17 00:00:00 2001 From: Thomas Jarosch Date: Thu, 17 Nov 2011 10:33:52 +0000 Subject: [PATCH 029/364] iseries_veth: Fix wrong parameter given to sizeof call "remote_list" is of type struct dma_chunk remote_list[VETH_MAX_FRAMES_PER_MSG]; Probably a copy'n'paste error. Signed-off-by: Thomas Jarosch Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/iseries_veth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/iseries_veth.c b/drivers/net/ethernet/ibm/iseries_veth.c index 4326681df382..acc31af6594a 100644 --- a/drivers/net/ethernet/ibm/iseries_veth.c +++ b/drivers/net/ethernet/ibm/iseries_veth.c @@ -1421,7 +1421,7 @@ static void veth_receive(struct veth_lpar_connection *cnx, /* FIXME: do we need this? */ memset(local_list, 0, sizeof(local_list)); - memset(remote_list, 0, sizeof(VETH_MAX_FRAMES_PER_MSG)); + memset(remote_list, 0, sizeof(remote_list)); /* a 0 address marks the end of the valid entries */ if (senddata->addr[startchunk] == 0) From 4f795b25eaf1109c77abfc3b57cef9b993f3aede Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Fri, 18 Nov 2011 05:00:20 +0000 Subject: [PATCH 030/364] stmmac: mask mmc interrupts We need to mask the MMC irq otherwise if we raise the mmc interrupts that are not handled the driver loops in the handler. In fact, by default all mmc counters (only used for stats) are managed in SW and registers are cleared on each READ. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 8ea770a89f25..72cd190b9c1a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -781,10 +781,15 @@ static void stmmac_mmc_setup(struct stmmac_priv *priv) unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET | MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET; - /* Do not manage MMC IRQ (FIXME) */ + /* Mask MMC irq, counters are managed in SW and registers + * are cleared on each READ eventually. */ dwmac_mmc_intr_all_mask(priv->ioaddr); - dwmac_mmc_ctrl(priv->ioaddr, mode); - memset(&priv->mmc, 0, sizeof(struct stmmac_counters)); + + if (priv->dma_cap.rmon) { + dwmac_mmc_ctrl(priv->ioaddr, mode); + memset(&priv->mmc, 0, sizeof(struct stmmac_counters)); + } else + pr_info(" No MAC Management Counters available"); } static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv) @@ -1012,8 +1017,7 @@ static int stmmac_open(struct net_device *dev) memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); priv->xstats.threshold = tc; - if (priv->dma_cap.rmon) - stmmac_mmc_setup(priv); + stmmac_mmc_setup(priv); /* Start the ball rolling... */ DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name); From 5ccb3ea72097ee0c8ea1f200a2ade101caf08aa4 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 18 Nov 2011 05:42:05 +0000 Subject: [PATCH 031/364] xen-netback: use correct index for invalidation in xen_netbk_tx_check_gop() Signed-off-by: Jan Beulich Signed-off-by: Ian Campbell Cc: stable@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/xen-netback/netback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 0cb594c86090..1ae270eed51a 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -1021,7 +1021,7 @@ static int xen_netbk_tx_check_gop(struct xen_netbk *netbk, pending_idx = *((u16 *)skb->data); xen_netbk_idx_release(netbk, pending_idx); for (j = start; j < i; j++) { - pending_idx = frag_get_pending_idx(&shinfo->frags[i]); + pending_idx = frag_get_pending_idx(&shinfo->frags[j]); xen_netbk_idx_release(netbk, pending_idx); } From fbe54e3b7a7ad7de92b65e8b10fae300eeec6ef3 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 20 Nov 2011 11:07:09 +0000 Subject: [PATCH 032/364] net, sja1000: Don't include version.h in peak_pci.c when not needed It was pointed out by "make versioncheck" that we do not need to include version.h in drivers/net/can/sja1000/peak_pci.c This patch removes the unneeded include. Signed-off-by: Jesper Juhl Acked-by: Marc Kleine-Budde Signed-off-by: David S. Miller --- drivers/net/can/sja1000/peak_pci.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index 905bce0b3a43..2c7f5036f570 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -20,7 +20,6 @@ */ #include -#include #include #include #include From 525c6465d449cdec04b3c91733e46027a4d08422 Mon Sep 17 00:00:00 2001 From: "RongQing.Li" Date: Mon, 21 Nov 2011 16:45:26 -0500 Subject: [PATCH 033/364] dccp: fix error propagation in dccp_v4_connect The errcode is not updated when ip_route_newports() fails. Signed-off-by: RongQing.Li Signed-off-by: David S. Miller --- net/dccp/ipv4.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index 90a919afbed7..3f4e5414c8e5 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -111,6 +111,7 @@ int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) rt = ip_route_newports(fl4, rt, orig_sport, orig_dport, inet->inet_sport, inet->inet_dport, sk); if (IS_ERR(rt)) { + err = PTR_ERR(rt); rt = NULL; goto failure; } From f23aa62545c18728eb2b9434aa258be27e07dd49 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 21 Nov 2011 16:46:24 -0500 Subject: [PATCH 034/364] caif: fix endian conversion in cffrml_transmit() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The "tmp" variable here is used to store the result of cpu_to_le16() so it should be an __le16 instead of an int. We want the high bits set and the current code works on little endian systems but not on big endian systems. Signed-off-by: Dan Carpenter Acked-by: Sjur Brændeland Signed-off-by: David S. Miller --- net/caif/cffrml.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/caif/cffrml.c b/net/caif/cffrml.c index f39921171d0d..d3ca87bf23b7 100644 --- a/net/caif/cffrml.c +++ b/net/caif/cffrml.c @@ -136,20 +136,21 @@ static int cffrml_receive(struct cflayer *layr, struct cfpkt *pkt) static int cffrml_transmit(struct cflayer *layr, struct cfpkt *pkt) { - int tmp; u16 chks; u16 len; + __le16 data; + struct cffrml *this = container_obj(layr); if (this->dofcs) { chks = cfpkt_iterate(pkt, cffrml_checksum, 0xffff); - tmp = cpu_to_le16(chks); - cfpkt_add_trail(pkt, &tmp, 2); + data = cpu_to_le16(chks); + cfpkt_add_trail(pkt, &data, 2); } else { cfpkt_pad_trail(pkt, 2); } len = cfpkt_getlen(pkt); - tmp = cpu_to_le16(len); - cfpkt_add_head(pkt, &tmp, 2); + data = cpu_to_le16(len); + cfpkt_add_head(pkt, &data, 2); cfpkt_info(pkt)->hdr_len += 2; if (cfpkt_erroneous(pkt)) { pr_err("Packet is erroneous!\n"); From 70e9942f17a6193e9172a804e6569a8806633d6b Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 22 Nov 2011 00:16:51 +0100 Subject: [PATCH 035/364] netfilter: nf_conntrack: make event callback registration per-netns This patch fixes an oops that can be triggered following this recipe: 0) make sure nf_conntrack_netlink and nf_conntrack_ipv4 are loaded. 1) container is started. 2) connect to it via lxc-console. 3) generate some traffic with the container to create some conntrack entries in its table. 4) stop the container: you hit one oops because the conntrack table cleanup tries to report the destroy event to user-space but the per-netns nfnetlink socket has already gone (as the nfnetlink socket is per-netns but event callback registration is global). To fix this situation, we make the ctnl_notifier per-netns so the callback is registered/unregistered if the container is created/destroyed. Alex Bligh and Alexey Dobriyan originally proposed one small patch to check if the nfnetlink socket is gone in nfnetlink_has_listeners, but this is a very visited path for events, thus, it may reduce performance and it looks a bit hackish to check for the nfnetlink socket only to workaround this situation. As a result, I decided to follow the bigger path choice, which seems to look nicer to me. Cc: Alexey Dobriyan Reported-by: Alex Bligh Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_conntrack_ecache.h | 19 +++--- include/net/netns/conntrack.h | 2 + net/netfilter/nf_conntrack_ecache.c | 37 +++++------ net/netfilter/nf_conntrack_netlink.c | 73 +++++++++++++++------ 4 files changed, 82 insertions(+), 49 deletions(-) diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h index 4283508b3e18..a88fb6939387 100644 --- a/include/net/netfilter/nf_conntrack_ecache.h +++ b/include/net/netfilter/nf_conntrack_ecache.h @@ -67,18 +67,18 @@ struct nf_ct_event_notifier { int (*fcn)(unsigned int events, struct nf_ct_event *item); }; -extern struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb; -extern int nf_conntrack_register_notifier(struct nf_ct_event_notifier *nb); -extern void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *nb); +extern int nf_conntrack_register_notifier(struct net *net, struct nf_ct_event_notifier *nb); +extern void nf_conntrack_unregister_notifier(struct net *net, struct nf_ct_event_notifier *nb); extern void nf_ct_deliver_cached_events(struct nf_conn *ct); static inline void nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct) { + struct net *net = nf_ct_net(ct); struct nf_conntrack_ecache *e; - if (nf_conntrack_event_cb == NULL) + if (net->ct.nf_conntrack_event_cb == NULL) return; e = nf_ct_ecache_find(ct); @@ -95,11 +95,12 @@ nf_conntrack_eventmask_report(unsigned int eventmask, int report) { int ret = 0; + struct net *net = nf_ct_net(ct); struct nf_ct_event_notifier *notify; struct nf_conntrack_ecache *e; rcu_read_lock(); - notify = rcu_dereference(nf_conntrack_event_cb); + notify = rcu_dereference(net->ct.nf_conntrack_event_cb); if (notify == NULL) goto out_unlock; @@ -164,9 +165,8 @@ struct nf_exp_event_notifier { int (*fcn)(unsigned int events, struct nf_exp_event *item); }; -extern struct nf_exp_event_notifier __rcu *nf_expect_event_cb; -extern int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *nb); -extern void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *nb); +extern int nf_ct_expect_register_notifier(struct net *net, struct nf_exp_event_notifier *nb); +extern void nf_ct_expect_unregister_notifier(struct net *net, struct nf_exp_event_notifier *nb); static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events event, @@ -174,11 +174,12 @@ nf_ct_expect_event_report(enum ip_conntrack_expect_events event, u32 pid, int report) { + struct net *net = nf_ct_exp_net(exp); struct nf_exp_event_notifier *notify; struct nf_conntrack_ecache *e; rcu_read_lock(); - notify = rcu_dereference(nf_expect_event_cb); + notify = rcu_dereference(net->ct.nf_expect_event_cb); if (notify == NULL) goto out_unlock; diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h index 0249399e51a7..7a911eca0f18 100644 --- a/include/net/netns/conntrack.h +++ b/include/net/netns/conntrack.h @@ -18,6 +18,8 @@ struct netns_ct { struct hlist_nulls_head unconfirmed; struct hlist_nulls_head dying; struct ip_conntrack_stat __percpu *stat; + struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb; + struct nf_exp_event_notifier __rcu *nf_expect_event_cb; int sysctl_events; unsigned int sysctl_events_retry_timeout; int sysctl_acct; diff --git a/net/netfilter/nf_conntrack_ecache.c b/net/netfilter/nf_conntrack_ecache.c index 6b368be937c6..b62c4148b921 100644 --- a/net/netfilter/nf_conntrack_ecache.c +++ b/net/netfilter/nf_conntrack_ecache.c @@ -27,22 +27,17 @@ static DEFINE_MUTEX(nf_ct_ecache_mutex); -struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb __read_mostly; -EXPORT_SYMBOL_GPL(nf_conntrack_event_cb); - -struct nf_exp_event_notifier __rcu *nf_expect_event_cb __read_mostly; -EXPORT_SYMBOL_GPL(nf_expect_event_cb); - /* deliver cached events and clear cache entry - must be called with locally * disabled softirqs */ void nf_ct_deliver_cached_events(struct nf_conn *ct) { + struct net *net = nf_ct_net(ct); unsigned long events; struct nf_ct_event_notifier *notify; struct nf_conntrack_ecache *e; rcu_read_lock(); - notify = rcu_dereference(nf_conntrack_event_cb); + notify = rcu_dereference(net->ct.nf_conntrack_event_cb); if (notify == NULL) goto out_unlock; @@ -83,19 +78,20 @@ out_unlock: } EXPORT_SYMBOL_GPL(nf_ct_deliver_cached_events); -int nf_conntrack_register_notifier(struct nf_ct_event_notifier *new) +int nf_conntrack_register_notifier(struct net *net, + struct nf_ct_event_notifier *new) { int ret = 0; struct nf_ct_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_conntrack_event_cb, + notify = rcu_dereference_protected(net->ct.nf_conntrack_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); if (notify != NULL) { ret = -EBUSY; goto out_unlock; } - RCU_INIT_POINTER(nf_conntrack_event_cb, new); + RCU_INIT_POINTER(net->ct.nf_conntrack_event_cb, new); mutex_unlock(&nf_ct_ecache_mutex); return ret; @@ -105,32 +101,34 @@ out_unlock: } EXPORT_SYMBOL_GPL(nf_conntrack_register_notifier); -void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *new) +void nf_conntrack_unregister_notifier(struct net *net, + struct nf_ct_event_notifier *new) { struct nf_ct_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_conntrack_event_cb, + notify = rcu_dereference_protected(net->ct.nf_conntrack_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); BUG_ON(notify != new); - RCU_INIT_POINTER(nf_conntrack_event_cb, NULL); + RCU_INIT_POINTER(net->ct.nf_conntrack_event_cb, NULL); mutex_unlock(&nf_ct_ecache_mutex); } EXPORT_SYMBOL_GPL(nf_conntrack_unregister_notifier); -int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *new) +int nf_ct_expect_register_notifier(struct net *net, + struct nf_exp_event_notifier *new) { int ret = 0; struct nf_exp_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_expect_event_cb, + notify = rcu_dereference_protected(net->ct.nf_expect_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); if (notify != NULL) { ret = -EBUSY; goto out_unlock; } - RCU_INIT_POINTER(nf_expect_event_cb, new); + RCU_INIT_POINTER(net->ct.nf_expect_event_cb, new); mutex_unlock(&nf_ct_ecache_mutex); return ret; @@ -140,15 +138,16 @@ out_unlock: } EXPORT_SYMBOL_GPL(nf_ct_expect_register_notifier); -void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *new) +void nf_ct_expect_unregister_notifier(struct net *net, + struct nf_exp_event_notifier *new) { struct nf_exp_event_notifier *notify; mutex_lock(&nf_ct_ecache_mutex); - notify = rcu_dereference_protected(nf_expect_event_cb, + notify = rcu_dereference_protected(net->ct.nf_expect_event_cb, lockdep_is_held(&nf_ct_ecache_mutex)); BUG_ON(notify != new); - RCU_INIT_POINTER(nf_expect_event_cb, NULL); + RCU_INIT_POINTER(net->ct.nf_expect_event_cb, NULL); mutex_unlock(&nf_ct_ecache_mutex); } EXPORT_SYMBOL_GPL(nf_ct_expect_unregister_notifier); diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index e58aa9b1fe8a..ef21b221f036 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -4,7 +4,7 @@ * (C) 2001 by Jay Schulist * (C) 2002-2006 by Harald Welte * (C) 2003 by Patrick Mchardy - * (C) 2005-2008 by Pablo Neira Ayuso + * (C) 2005-2011 by Pablo Neira Ayuso * * Initial connection tracking via netlink development funded and * generally made possible by Network Robots, Inc. (www.networkrobots.com) @@ -2163,6 +2163,54 @@ MODULE_ALIAS("ip_conntrack_netlink"); MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK); MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_CTNETLINK_EXP); +static int __net_init ctnetlink_net_init(struct net *net) +{ +#ifdef CONFIG_NF_CONNTRACK_EVENTS + int ret; + + ret = nf_conntrack_register_notifier(net, &ctnl_notifier); + if (ret < 0) { + pr_err("ctnetlink_init: cannot register notifier.\n"); + goto err_out; + } + + ret = nf_ct_expect_register_notifier(net, &ctnl_notifier_exp); + if (ret < 0) { + pr_err("ctnetlink_init: cannot expect register notifier.\n"); + goto err_unreg_notifier; + } +#endif + return 0; + +#ifdef CONFIG_NF_CONNTRACK_EVENTS +err_unreg_notifier: + nf_conntrack_unregister_notifier(net, &ctnl_notifier); +err_out: + return ret; +#endif +} + +static void ctnetlink_net_exit(struct net *net) +{ +#ifdef CONFIG_NF_CONNTRACK_EVENTS + nf_ct_expect_unregister_notifier(net, &ctnl_notifier_exp); + nf_conntrack_unregister_notifier(net, &ctnl_notifier); +#endif +} + +static void __net_exit ctnetlink_net_exit_batch(struct list_head *net_exit_list) +{ + struct net *net; + + list_for_each_entry(net, net_exit_list, exit_list) + ctnetlink_net_exit(net); +} + +static struct pernet_operations ctnetlink_net_ops = { + .init = ctnetlink_net_init, + .exit_batch = ctnetlink_net_exit_batch, +}; + static int __init ctnetlink_init(void) { int ret; @@ -2180,28 +2228,15 @@ static int __init ctnetlink_init(void) goto err_unreg_subsys; } -#ifdef CONFIG_NF_CONNTRACK_EVENTS - ret = nf_conntrack_register_notifier(&ctnl_notifier); - if (ret < 0) { - pr_err("ctnetlink_init: cannot register notifier.\n"); + if (register_pernet_subsys(&ctnetlink_net_ops)) { + pr_err("ctnetlink_init: cannot register pernet operations\n"); goto err_unreg_exp_subsys; } - ret = nf_ct_expect_register_notifier(&ctnl_notifier_exp); - if (ret < 0) { - pr_err("ctnetlink_init: cannot expect register notifier.\n"); - goto err_unreg_notifier; - } -#endif - return 0; -#ifdef CONFIG_NF_CONNTRACK_EVENTS -err_unreg_notifier: - nf_conntrack_unregister_notifier(&ctnl_notifier); err_unreg_exp_subsys: nfnetlink_subsys_unregister(&ctnl_exp_subsys); -#endif err_unreg_subsys: nfnetlink_subsys_unregister(&ctnl_subsys); err_out: @@ -2213,11 +2248,7 @@ static void __exit ctnetlink_exit(void) pr_info("ctnetlink: unregistering from nfnetlink.\n"); nf_ct_remove_userspace_expectations(); -#ifdef CONFIG_NF_CONNTRACK_EVENTS - nf_ct_expect_unregister_notifier(&ctnl_notifier_exp); - nf_conntrack_unregister_notifier(&ctnl_notifier); -#endif - + unregister_pernet_subsys(&ctnetlink_net_ops); nfnetlink_subsys_unregister(&ctnl_exp_subsys); nfnetlink_subsys_unregister(&ctnl_subsys); } From 72531c9434fa884d20cb3c36fcec83752f32fdf4 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 22 Nov 2011 09:46:51 +0800 Subject: [PATCH 036/364] ASoC: Fix wrong define for AD1836_ADC_WORD_OFFSET According to the datasheet: The BIT[5:4] of ADC Control Register 2 is to control the word width. 00 = 25 Bits 01 = 20 Bits 10 = 16 Bits 11 = Invalid Thus, the AD1836_ADC_WORD_OFFSET should be defined as 4. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/ad1836.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/ad1836.h b/sound/soc/codecs/ad1836.h index 444747f0db26..dd7be0dbbc58 100644 --- a/sound/soc/codecs/ad1836.h +++ b/sound/soc/codecs/ad1836.h @@ -34,7 +34,7 @@ #define AD1836_ADC_CTRL2 13 #define AD1836_ADC_WORD_LEN_MASK 0x30 -#define AD1836_ADC_WORD_OFFSET 5 +#define AD1836_ADC_WORD_OFFSET 4 #define AD1836_ADC_SERFMT_MASK (7 << 6) #define AD1836_ADC_SERFMT_PCK256 (0x4 << 6) #define AD1836_ADC_SERFMT_PCK128 (0x5 << 6) From 5c4b2aa3fd1dc30af098de5dec766a817621ace2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 22 Nov 2011 14:47:44 +0800 Subject: [PATCH 037/364] ASoC: max9877: Update register if either val or val2 is changed In the case of ((max9877_regs[reg] >> shift) & mask) != val but ((max9877_regs[reg2] >> shift) & mask) == val2, current code does not update the registers. Fix the logic to update registers if either val or val2 is changed. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/codecs/max9877.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/max9877.c b/sound/soc/codecs/max9877.c index 9e7e964a5fa3..dcf6f2a1600a 100644 --- a/sound/soc/codecs/max9877.c +++ b/sound/soc/codecs/max9877.c @@ -106,13 +106,13 @@ static int max9877_set_2reg(struct snd_kcontrol *kcontrol, unsigned int mask = mc->max; unsigned int val = (ucontrol->value.integer.value[0] & mask); unsigned int val2 = (ucontrol->value.integer.value[1] & mask); - unsigned int change = 1; + unsigned int change = 0; - if (((max9877_regs[reg] >> shift) & mask) == val) - change = 0; + if (((max9877_regs[reg] >> shift) & mask) != val) + change = 1; - if (((max9877_regs[reg2] >> shift) & mask) == val2) - change = 0; + if (((max9877_regs[reg2] >> shift) & mask) != val2) + change = 1; if (change) { max9877_regs[reg] &= ~(mask << shift); From 3d94a2a53a3979c30620e3adea10f20bef8267b3 Mon Sep 17 00:00:00 2001 From: Boojin Kim Date: Tue, 22 Nov 2011 11:03:22 +0900 Subject: [PATCH 038/364] ASoC: SAMSUNG: Fix build error This patch adds to fix following build errors. sound/soc/codecs/wm8994.c: In function 'wm8994_readable': sound/soc/codecs/wm8994.c:58: warning: unused variable 'wm8994' sound/soc/samsung/smdk_wm8994.c:176: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk_wm8994.c:176: warning: data definition has no type or storage class sound/soc/samsung/smdk_wm8994.c:176: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' sound/soc/samsung/smdk_wm8994.c:176: warning: function declaration isn't a prototype sound/soc/samsung/smdk_wm8994.c:177: error: expected declaration specifiers or '...' before string constant Signed-off-by: Boojin Kim Signed-off-by: Mark Brown --- sound/soc/samsung/smdk_wm8994.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/samsung/smdk_wm8994.c b/sound/soc/samsung/smdk_wm8994.c index f75e43997d5b..ad9ac42522e2 100644 --- a/sound/soc/samsung/smdk_wm8994.c +++ b/sound/soc/samsung/smdk_wm8994.c @@ -9,6 +9,7 @@ #include "../codecs/wm8994.h" #include +#include /* * Default CFG switch settings to use this driver: From 717b6d83664646963c71d014c71babaa802333b9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Maciej=20=C5=BBenczykowski?= Date: Tue, 22 Nov 2011 16:03:10 -0500 Subject: [PATCH 039/364] net-netlink: fix diag to export IPv4 tos for dual-stack IPv6 sockets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Maciej Å»enczykowski Signed-off-by: David S. Miller --- net/ipv4/inet_diag.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index 68e8ac514383..ccee270a9b65 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -108,9 +108,6 @@ static int inet_csk_diag_fill(struct sock *sk, icsk->icsk_ca_ops->name); } - if ((ext & (1 << (INET_DIAG_TOS - 1))) && (sk->sk_family != AF_INET6)) - RTA_PUT_U8(skb, INET_DIAG_TOS, inet->tos); - r->idiag_family = sk->sk_family; r->idiag_state = sk->sk_state; r->idiag_timer = 0; @@ -125,16 +122,23 @@ static int inet_csk_diag_fill(struct sock *sk, r->id.idiag_src[0] = inet->inet_rcv_saddr; r->id.idiag_dst[0] = inet->inet_daddr; + /* IPv6 dual-stack sockets use inet->tos for IPv4 connections, + * hence this needs to be included regardless of socket family. + */ + if (ext & (1 << (INET_DIAG_TOS - 1))) + RTA_PUT_U8(skb, INET_DIAG_TOS, inet->tos); + #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE) if (r->idiag_family == AF_INET6) { const struct ipv6_pinfo *np = inet6_sk(sk); + if (ext & (1 << (INET_DIAG_TCLASS - 1))) + RTA_PUT_U8(skb, INET_DIAG_TCLASS, np->tclass); + ipv6_addr_copy((struct in6_addr *)r->id.idiag_src, &np->rcv_saddr); ipv6_addr_copy((struct in6_addr *)r->id.idiag_dst, &np->daddr); - if (ext & (1 << (INET_DIAG_TCLASS - 1))) - RTA_PUT_U8(skb, INET_DIAG_TCLASS, np->tclass); } #endif From 20e994a05b33b186a22a3b9e922df4cce644daac Mon Sep 17 00:00:00 2001 From: Feng King Date: Mon, 21 Nov 2011 01:47:11 +0000 Subject: [PATCH 040/364] net: correct comments of skb_shift when skb_shift, we want to shift paged data from skb to tgt frag area. Original comments revert the shift order Signed-off-by: Feng King Signed-off-by: David S. Miller --- net/core/skbuff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 18a3cebb753d..3c30ee4a5710 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2230,7 +2230,7 @@ static int skb_prepare_for_shift(struct sk_buff *skb) * @shiftlen: shift up to this many bytes * * Attempts to shift up to shiftlen worth of bytes, which may be less than - * the length of the skb, from tgt to skb. Returns number bytes shifted. + * the length of the skb, from skb to tgt. Returns number bytes shifted. * It's up to caller to free skb if everything was shifted. * * If @tgt runs out of frags, the whole operation is aborted. From 6cccccafe9e8b88adb1800940ded6ad76c587e1b Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 22 Nov 2011 16:36:35 -0500 Subject: [PATCH 041/364] Revert "rt2x00: handle spurious pci interrupts" This reverts commit 23085d5796561625db4143a671f1de081f66ef08. The original patch was a misguided attempt to improve performance on some hardware that is apparently prone to spurious interrupt generation. Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2400pci.c | 2 +- drivers/net/wireless/rt2x00/rt2500pci.c | 2 +- drivers/net/wireless/rt2x00/rt61pci.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 676c7657f5f5..3a6b40239bc1 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1380,7 +1380,7 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, CSR7, reg); if (!reg) - return IRQ_HANDLED; + return IRQ_NONE; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index d0b627c6c217..dcc0e1fcca77 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1512,7 +1512,7 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, CSR7, reg); if (!reg) - return IRQ_HANDLED; + return IRQ_NONE; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 9d83e70f3e62..bf55b4a311e3 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2337,7 +2337,7 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); if (!reg && !reg_mcu) - return IRQ_HANDLED; + return IRQ_NONE; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; From 5eccdf5e06eb67779716ae26142402a1ae9b012c Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 21 Nov 2011 06:53:46 +0000 Subject: [PATCH 042/364] tc: comment spelling fixes Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/pkt_sched.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h index c5336705921f..7281d5acf2f9 100644 --- a/include/linux/pkt_sched.h +++ b/include/linux/pkt_sched.h @@ -30,7 +30,7 @@ */ struct tc_stats { - __u64 bytes; /* NUmber of enqueues bytes */ + __u64 bytes; /* Number of enqueued bytes */ __u32 packets; /* Number of enqueued packets */ __u32 drops; /* Packets dropped because of lack of resources */ __u32 overlimits; /* Number of throttle events when this @@ -297,7 +297,7 @@ struct tc_htb_glob { __u32 debug; /* debug flags */ /* stats */ - __u32 direct_pkts; /* count of non shapped packets */ + __u32 direct_pkts; /* count of non shaped packets */ }; enum { TCA_HTB_UNSPEC, @@ -503,7 +503,7 @@ enum { }; #define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1) -/* State transition probablities for 4 state model */ +/* State transition probabilities for 4 state model */ struct tc_netem_gimodel { __u32 p13; __u32 p31; From 82e5fc2a34fa9ffea38f00c4066b7e600a0ca5e6 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 22 Nov 2011 16:38:19 -0500 Subject: [PATCH 043/364] Revert "rt2800pci: handle spurious interrupts" This reverts commit 4ba7d9997869d25bd223dea7536fc1ce9fab3b3b. The original patch was a misguided attempt to improve performance on some hardware that is apparently prone to spurious interrupt generation. Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800pci.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 4dc2d0f840d4..da48c8ac27bd 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -880,13 +880,8 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); - /* - * Some devices can generate interrupts with empty CSR register, we - * "handle" such irq's to prevent interrupt controller treat them as - * spurious interrupts and disable irq line. - */ if (!reg) - return IRQ_HANDLED; + return IRQ_NONE; if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) return IRQ_HANDLED; From d66b8537b30fbaf79e0f467fa6b7e1a2191cba83 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 22 Nov 2011 17:17:23 +0100 Subject: [PATCH 044/364] ASoC: cs4720: use snd_soc_cache_sync() Replace the manual register restore mechanism in cs4270.c and call the generic snd_soc_cache_sync() handler instead. This factors code out in favour of core facilities and also fixes a bus confusion that is most probably caused by intermixing i2c-regmap functions and i2c_smbus_* accessors. Signed-off-by: Daniel Mack Reported-and-tested-by: Sven Neumann Acked-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index f1f237ecec2a..73f46eb459f1 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -601,7 +601,6 @@ static int cs4270_soc_suspend(struct snd_soc_codec *codec, pm_message_t mesg) static int cs4270_soc_resume(struct snd_soc_codec *codec) { struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); - struct i2c_client *i2c_client = to_i2c_client(codec->dev); int reg; regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies), @@ -612,14 +611,7 @@ static int cs4270_soc_resume(struct snd_soc_codec *codec) ndelay(500); /* first restore the entire register cache ... */ - for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) { - u8 val = snd_soc_read(codec, reg); - - if (i2c_smbus_write_byte_data(i2c_client, reg, val)) { - dev_err(codec->dev, "i2c write failed\n"); - return -EIO; - } - } + snd_soc_cache_sync(codec); /* ... then disable the power-down bits */ reg = snd_soc_read(codec, CS4270_PWRCTL); From 380c88303812951f6c838241366a66a03fb5c897 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 22 Nov 2011 14:38:59 -0600 Subject: [PATCH 045/364] ASoC: mpc8610: tell the CS4270 codec that it's the master Commit ac601555 ("ASoC: Return early with -EINVAL if invalid dai format is detected") requires the machine driver to tell the CS4270 codec driver whether the CS4270 should be configured for master or slave operation. Signed-off-by: Timur Tabi Signed-off-by: Mark Brown --- sound/soc/fsl/mpc8610_hpcd.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index 31af405bda84..ae49f1c78c6d 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -392,7 +392,8 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) } if (strcasecmp(sprop, "i2s-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_I2S; + machine_data->dai_format = + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; @@ -409,31 +410,38 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) } machine_data->clk_frequency = be32_to_cpup(iprop); } else if (strcasecmp(sprop, "i2s-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_I2S; + machine_data->dai_format = + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "lj-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "lj-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "rj-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "rj-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J; + machine_data->dai_format = + SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "ac97-slave") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_AC97; + machine_data->dai_format = + SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBM_CFM; machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT; machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "ac97-master") == 0) { - machine_data->dai_format = SND_SOC_DAIFMT_AC97; + machine_data->dai_format = + SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBS_CFS; machine_data->codec_clk_direction = SND_SOC_CLOCK_IN; machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else { From 7c8f4247986bb5c5fb1d5b1fad35461989fe8310 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 23 Nov 2011 10:18:52 +1100 Subject: [PATCH 046/364] md/lock: ensure updates to page_attrs are properly locked. Page attributes are set using __set_bit rather than set_bit as it normally called under a spinlock so the extra atomicity is not needed. However there are two places where we might set or clear page attributes without holding the spinlock. So add the spinlock in those cases. This might be the cause of occasional reports that bits a aren't getting clear properly - theory is that BITMAP_PAGE_PENDING gets lost when BITMAP_PAGE_NEEDWRITE is set or cleared. This is an inconvenience, not a threat to data safety. Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 7878712721bf..b6907118283a 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1106,10 +1106,12 @@ void bitmap_write_all(struct bitmap *bitmap) */ int i; + spin_lock_irq(&bitmap->lock); for (i = 0; i < bitmap->file_pages; i++) set_page_attr(bitmap, bitmap->filemap[i], BITMAP_PAGE_NEEDWRITE); bitmap->allclean = 0; + spin_unlock_irq(&bitmap->lock); } static void bitmap_count_page(struct bitmap *bitmap, sector_t offset, int inc) @@ -1605,7 +1607,9 @@ void bitmap_dirty_bits(struct bitmap *bitmap, unsigned long s, unsigned long e) for (chunk = s; chunk <= e; chunk++) { sector_t sec = (sector_t)chunk << CHUNK_BLOCK_SHIFT(bitmap); bitmap_set_memory_bits(bitmap, sec, 1); + spin_lock_irq(&bitmap->lock); bitmap_file_set_bit(bitmap, sec); + spin_unlock_irq(&bitmap->lock); if (sec < bitmap->mddev->recovery_cp) /* We are asserting that the array is dirty, * so move the recovery_cp address back so From c0afabd3d553c521e003779c127143ffde55a16f Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 22 Nov 2011 11:03:14 +0100 Subject: [PATCH 047/364] rtc: Disable the alarm in the hardware Currently, the RTC code does not disable the alarm in the hardware. This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off. # echo $((`cat since_epoch`)+120) > wakealarm # echo 0 > wakealarm # poweroff Fix this by disabling the alarm when there are no timers to run. Cc: stable@kernel.org Cc: John Stultz Signed-off-by: Rabin Vincent Signed-off-by: John Stultz --- drivers/rtc/interface.c | 44 +++++++++++++++++++++++++++++++---------- 1 file changed, 34 insertions(+), 10 deletions(-) diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 3195dbd3ec34..e3cf2f54221f 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -318,6 +318,20 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) } EXPORT_SYMBOL_GPL(rtc_read_alarm); +static int ___rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) +{ + int err; + + if (!rtc->ops) + err = -ENODEV; + else if (!rtc->ops->set_alarm) + err = -EINVAL; + else + err = rtc->ops->set_alarm(rtc->dev.parent, alarm); + + return err; +} + static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) { struct rtc_time tm; @@ -341,14 +355,7 @@ static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) * over right here, before we set the alarm. */ - if (!rtc->ops) - err = -ENODEV; - else if (!rtc->ops->set_alarm) - err = -EINVAL; - else - err = rtc->ops->set_alarm(rtc->dev.parent, alarm); - - return err; + return ___rtc_set_alarm(rtc, alarm); } int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) @@ -762,6 +769,20 @@ static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer) return 0; } +static void rtc_alarm_disable(struct rtc_device *rtc) +{ + struct rtc_wkalrm alarm; + struct rtc_time tm; + + __rtc_read_time(rtc, &tm); + + alarm.time = rtc_ktime_to_tm(ktime_add(rtc_tm_to_ktime(tm), + ktime_set(300, 0))); + alarm.enabled = 0; + + ___rtc_set_alarm(rtc, &alarm); +} + /** * rtc_timer_remove - Removes a rtc_timer from the rtc_device timerqueue * @rtc rtc device @@ -783,8 +804,10 @@ static void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer) struct rtc_wkalrm alarm; int err; next = timerqueue_getnext(&rtc->timerqueue); - if (!next) + if (!next) { + rtc_alarm_disable(rtc); return; + } alarm.time = rtc_ktime_to_tm(next->expires); alarm.enabled = 1; err = __rtc_set_alarm(rtc, &alarm); @@ -846,7 +869,8 @@ again: err = __rtc_set_alarm(rtc, &alarm); if (err == -ETIME) goto again; - } + } else + rtc_alarm_disable(rtc); mutex_unlock(&rtc->ops_lock); } From 6a8943d9ec2567572fca25cf69ad45844d0141a3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Arve=20Hj=C3=B8nnev=C3=A5g?= Date: Tue, 22 Nov 2011 18:24:51 -0800 Subject: [PATCH 048/364] rtc: Fix some bugs that allowed accumulating time drift in suspend/resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current code checks if abs(delta_delta.tv_sec) is greater or equal to two before it discards the old delta value, but this can trigger at close to -1 seconds since -1.000000001 seconds is stored as tv_sec -2 and tv_nsec 999999999 in a normalized timespec. rtc_resume had an early return check if the rtc value had not changed since rtc_suspend. This effectivly stops time for the duration of the short sleep. Check if sleep_time is positive after all the adjustments have been applied instead since this allows the old_system adjustment in rtc_suspend to have an effect even for short sleep cycles. CC: stable@kernel.org Signed-off-by: Arve HjønnevÃ¥g Signed-off-by: John Stultz --- drivers/rtc/class.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c index 01a7df5317c1..b82a1554cdc1 100644 --- a/drivers/rtc/class.c +++ b/drivers/rtc/class.c @@ -66,7 +66,7 @@ static int rtc_suspend(struct device *dev, pm_message_t mesg) */ delta = timespec_sub(old_system, old_rtc); delta_delta = timespec_sub(delta, old_delta); - if (abs(delta_delta.tv_sec) >= 2) { + if (delta_delta.tv_sec < -2 || delta_delta.tv_sec >= 2) { /* * if delta_delta is too large, assume time correction * has occured and set old_delta to the current delta. @@ -100,9 +100,8 @@ static int rtc_resume(struct device *dev) rtc_tm_to_time(&tm, &new_rtc.tv_sec); new_rtc.tv_nsec = 0; - if (new_rtc.tv_sec <= old_rtc.tv_sec) { - if (new_rtc.tv_sec < old_rtc.tv_sec) - pr_debug("%s: time travel!\n", dev_name(&rtc->dev)); + if (new_rtc.tv_sec < old_rtc.tv_sec) { + pr_debug("%s: time travel!\n", dev_name(&rtc->dev)); return 0; } @@ -119,7 +118,8 @@ static int rtc_resume(struct device *dev) sleep_time = timespec_sub(sleep_time, timespec_sub(new_system, old_system)); - timekeeping_inject_sleeptime(&sleep_time); + if (sleep_time.tv_sec >= 0) + timekeeping_inject_sleeptime(&sleep_time); return 0; } From 4d65a2465f6f2694de67777a8aedb1272f473979 Mon Sep 17 00:00:00 2001 From: Li Wei Date: Wed, 23 Nov 2011 03:51:54 -0500 Subject: [PATCH 049/364] ipv6: fix a bug in ndisc_send_redirect Release skb when transmit rate limit _not_ allow Signed-off-by: Li Wei Signed-off-by: David S. Miller --- net/ipv6/ndisc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 44e5b7f2a6c1..0cb78d7ddaf5 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1571,7 +1571,7 @@ void ndisc_send_redirect(struct sk_buff *skb, struct neighbour *neigh, } if (!rt->rt6i_peer) rt6_bind_peer(rt, 1); - if (inet_peer_xrlim_allow(rt->rt6i_peer, 1*HZ)) + if (!inet_peer_xrlim_allow(rt->rt6i_peer, 1*HZ)) goto release; if (dev->addr_len) { From 4ca8af579c9748376db537575f7a811c179fe50a Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 23 Nov 2011 10:39:10 +0100 Subject: [PATCH 050/364] ASoC: drop support for PlayPaq with WM8510 SoC Audio support for PlayPaq with WM8510 got added in commit 9aaca9683b ("[ALSA] Revised AT32 ASoC Patch"). That support depends on BOARD_PLAYPAQ. That Kconfig symbol didn't exist when that support got added in v2.6.27. It still doesn't. It has never been possible to even build this driver. Drop it. Signed-off-by: Paul Bolle Signed-off-by: Mark Brown --- sound/soc/atmel/Kconfig | 21 +- sound/soc/atmel/Makefile | 4 - sound/soc/atmel/playpaq_wm8510.c | 473 ------------------------------- 3 files changed, 1 insertion(+), 497 deletions(-) delete mode 100644 sound/soc/atmel/playpaq_wm8510.c diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index bee3c94f58b0..d1fcc816ce97 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -1,6 +1,6 @@ config SND_ATMEL_SOC tristate "SoC Audio for the Atmel System-on-Chip" - depends on ARCH_AT91 || AVR32 + depends on ARCH_AT91 help Say Y or M if you want to add support for codecs attached to the ATMEL SSC interface. You will also need @@ -24,25 +24,6 @@ config SND_AT91_SOC_SAM9G20_WM8731 Say Y if you want to add support for SoC audio on WM8731-based AT91sam9g20 evaluation board. -config SND_AT32_SOC_PLAYPAQ - tristate "SoC Audio support for PlayPaq with WM8510" - depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS - select SND_ATMEL_SOC_SSC - select SND_SOC_WM8510 - help - Say Y or M here if you want to add support for SoC audio - on the LRS PlayPaq. - -config SND_AT32_SOC_PLAYPAQ_SLAVE - bool "Run CODEC on PlayPaq in slave mode" - depends on SND_AT32_SOC_PLAYPAQ - default n - help - Say Y if you want to run with the AT32 SSC generating the BCLK - and FRAME signals on the PlayPaq. Unless you want to play - with the AT32 as the SSC master, you probably want to say N here, - as this will give you better sound quality. - config SND_AT91_SOC_AFEB9260 tristate "SoC Audio support for AFEB9260 board" depends on ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile index e7ea56bd5f82..a5c0bf19da78 100644 --- a/sound/soc/atmel/Makefile +++ b/sound/soc/atmel/Makefile @@ -8,9 +8,5 @@ obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o # AT91 Machine Support snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o -# AT32 Machine Support -snd-soc-playpaq-objs := playpaq_wm8510.o - obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o -obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c deleted file mode 100644 index 73ae99ad4578..000000000000 --- a/sound/soc/atmel/playpaq_wm8510.c +++ /dev/null @@ -1,473 +0,0 @@ -/* sound/soc/at32/playpaq_wm8510.c - * ASoC machine driver for PlayPaq using WM8510 codec - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c - * - * NOTE: If you don't have the AT32 enhanced portmux configured (which - * isn't currently in the mainline or Atmel patched kernel), you will - * need to set the MCLK pin (PA30) to peripheral A in your board initialization - * code. Something like: - * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); - * - */ - -/* #define DEBUG */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include "../codecs/wm8510.h" -#include "atmel-pcm.h" -#include "atmel_ssc_dai.h" - - -/*-------------------------------------------------------------------------*\ - * constants -\*-------------------------------------------------------------------------*/ -#define MCLK_PIN GPIO_PIN_PA(30) -#define MCLK_PERIPH GPIO_PERIPH_A - - -/*-------------------------------------------------------------------------*\ - * data types -\*-------------------------------------------------------------------------*/ -/* SSC clocking data */ -struct ssc_clock_data { - /* CMR div */ - unsigned int cmr_div; - - /* Frame period (as needed by xCMR.PERIOD) */ - unsigned int period; - - /* The SSC clock rate these settings where calculated for */ - unsigned long ssc_rate; -}; - - -/*-------------------------------------------------------------------------*\ - * module data -\*-------------------------------------------------------------------------*/ -static struct clk *_gclk0; -static struct clk *_pll0; - -#define CODEC_CLK (_gclk0) - - -/*-------------------------------------------------------------------------*\ - * Sound SOC operations -\*-------------------------------------------------------------------------*/ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE -static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( - struct snd_pcm_hw_params *params, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai); - struct ssc_device *ssc = ssc_p->ssc; - struct ssc_clock_data cd; - unsigned int rate, width_bits, channels; - unsigned int bitrate, ssc_div; - unsigned actual_rate; - - - /* - * Figure out required bitrate - */ - rate = params_rate(params); - channels = params_channels(params); - width_bits = snd_pcm_format_physical_width(params_format(params)); - bitrate = rate * width_bits * channels; - - - /* - * Figure out required SSC divider and period for required bitrate - */ - cd.ssc_rate = clk_get_rate(ssc->clk); - ssc_div = cd.ssc_rate / bitrate; - cd.cmr_div = ssc_div / 2; - if (ssc_div & 1) { - /* round cmr_div up */ - cd.cmr_div++; - } - cd.period = width_bits - 1; - - - /* - * Find actual rate, compare to requested rate - */ - actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); - pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n", - rate, actual_rate); - - - return cd; -} -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - -static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai); - struct ssc_device *ssc = ssc_p->ssc; - unsigned int pll_out = 0, bclk = 0, mclk_div = 0; - int ret; - - - /* Due to difficulties with getting the correct clocks from the AT32's - * PLL0, we're going to let the CODEC be in charge of all the clocks - */ -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); -#else - struct ssc_clock_data cd; - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); -#endif - - if (ssc == NULL) { - pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); - return -EINVAL; - } - - - /* - * Figure out PLL and BCLK dividers for WM8510 - */ - switch (params_rate(params)) { - case 48000: - pll_out = 24576000; - mclk_div = WM8510_MCLKDIV_2; - bclk = WM8510_BCLKDIV_8; - break; - - case 44100: - pll_out = 22579200; - mclk_div = WM8510_MCLKDIV_2; - bclk = WM8510_BCLKDIV_8; - break; - - case 22050: - pll_out = 22579200; - mclk_div = WM8510_MCLKDIV_4; - bclk = WM8510_BCLKDIV_8; - break; - - case 16000: - pll_out = 24576000; - mclk_div = WM8510_MCLKDIV_6; - bclk = WM8510_BCLKDIV_8; - break; - - case 11025: - pll_out = 22579200; - mclk_div = WM8510_MCLKDIV_8; - bclk = WM8510_BCLKDIV_8; - break; - - case 8000: - pll_out = 24576000; - mclk_div = WM8510_MCLKDIV_12; - bclk = WM8510_BCLKDIV_8; - break; - - default: - pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", - params_rate(params)); - return -EINVAL; - } - - - /* - * set CPU and CODEC DAI configuration - */ - ret = snd_soc_dai_set_fmt(codec_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CODEC DAI format (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_fmt(cpu_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU DAI format (%d)\n", - ret); - return ret; - } - - - /* - * Set CPU clock configuration - */ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); - pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", - cd.cmr_div, cd.period); - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, - cd.period); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU transmit period (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - /* - * Set CODEC clock configuration - */ - pr_debug("playpaq_wm8510: " - "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", - clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); - - -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); - if (ret < 0) { - pr_warning - ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - ret = snd_soc_dai_set_pll(codec_dai, 0, 0, - clk_get_rate(CODEC_CLK), pll_out); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", - ret); - return ret; - } - - - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", - ret); - return ret; - } - - - return 0; -} - - - -static struct snd_soc_ops playpaq_wm8510_ops = { - .hw_params = playpaq_wm8510_hw_params, -}; - - - -static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { - SND_SOC_DAPM_MIC("Int Mic", NULL), - SND_SOC_DAPM_SPK("Ext Spk", NULL), -}; - - - -static const struct snd_soc_dapm_route intercon[] = { - /* speaker connected to SPKOUT */ - {"Ext Spk", NULL, "SPKOUTP"}, - {"Ext Spk", NULL, "SPKOUTN"}, - - {"Mic Bias", NULL, "Int Mic"}, - {"MICN", NULL, "Mic Bias"}, - {"MICP", NULL, "Mic Bias"}, -}; - - - -static int playpaq_wm8510_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - int i; - - /* - * Add DAPM widgets - */ - for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) - snd_soc_dapm_new_control(dapm, &playpaq_dapm_widgets[i]); - - - - /* - * Setup audio path interconnects - */ - snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon)); - - - - /* always connected pins */ - snd_soc_dapm_enable_pin(dapm, "Int Mic"); - snd_soc_dapm_enable_pin(dapm, "Ext Spk"); - - - - /* Make CSB show PLL rate */ - snd_soc_dai_set_clkdiv(rtd->codec_dai, WM8510_OPCLKDIV, - WM8510_OPCLKDIV_1 | 4); - - return 0; -} - - - -static struct snd_soc_dai_link playpaq_wm8510_dai = { - .name = "WM8510", - .stream_name = "WM8510 PCM", - .cpu_dai_name= "atmel-ssc-dai.0", - .platform_name = "atmel-pcm-audio", - .codec_name = "wm8510-codec.0-0x1a", - .codec_dai_name = "wm8510-hifi", - .init = playpaq_wm8510_init, - .ops = &playpaq_wm8510_ops, -}; - - - -static struct snd_soc_card snd_soc_playpaq = { - .name = "LRS_PlayPaq_WM8510", - .dai_link = &playpaq_wm8510_dai, - .num_links = 1, -}; - -static struct platform_device *playpaq_snd_device; - - -static int __init playpaq_asoc_init(void) -{ - int ret = 0; - - /* - * Configure MCLK for WM8510 - */ - _gclk0 = clk_get(NULL, "gclk0"); - if (IS_ERR(_gclk0)) { - _gclk0 = NULL; - ret = PTR_ERR(_gclk0); - goto err_gclk0; - } - _pll0 = clk_get(NULL, "pll0"); - if (IS_ERR(_pll0)) { - _pll0 = NULL; - ret = PTR_ERR(_pll0); - goto err_pll0; - } - ret = clk_set_parent(_gclk0, _pll0); - if (ret) { - pr_warning("snd-soc-playpaq: " - "Failed to set PLL0 as parent for DAC clock\n"); - goto err_set_clk; - } - clk_set_rate(CODEC_CLK, 12000000); - clk_enable(CODEC_CLK); - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); -#endif - - - /* - * Create and register platform device - */ - playpaq_snd_device = platform_device_alloc("soc-audio", 0); - if (playpaq_snd_device == NULL) { - ret = -ENOMEM; - goto err_device_alloc; - } - - platform_set_drvdata(playpaq_snd_device, &snd_soc_playpaq); - - ret = platform_device_add(playpaq_snd_device); - if (ret) { - pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", - ret); - goto err_device_add; - } - - return 0; - - -err_device_add: - if (playpaq_snd_device != NULL) { - platform_device_put(playpaq_snd_device); - playpaq_snd_device = NULL; - } -err_device_alloc: -err_set_clk: - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } -err_pll0: - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } - return ret; -} - - -static void __exit playpaq_asoc_exit(void) -{ - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_free_pin(MCLK_PIN); -#endif - - platform_device_unregister(playpaq_snd_device); - playpaq_snd_device = NULL; -} - -module_init(playpaq_asoc_init); -module_exit(playpaq_asoc_exit); - -MODULE_AUTHOR("Geoffrey Wossum "); -MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); -MODULE_LICENSE("GPL"); From b284362b6b45150d171ff5bed92bc416b040aead Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 23 Nov 2011 12:46:11 +0800 Subject: [PATCH 051/364] ASoC: cs42l51: Fix off-by-one for reg_cache_size Just checking the code in cs42l51_fill_cache(): The cache pointer points to codec->reg_cache + 1. I think it is because CS42L51_FIRSTREG is 0x01, so codec->reg_cache[0] is not used here. Then we read CS42L51_NUMREGS bytes to cache. So we need reg_cache_size to be CS42L51_NUMREGS + 1. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l51.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c index 8c3c8205d19e..1ee66361f61b 100644 --- a/sound/soc/codecs/cs42l51.c +++ b/sound/soc/codecs/cs42l51.c @@ -555,7 +555,7 @@ static int cs42l51_probe(struct snd_soc_codec *codec) static struct snd_soc_codec_driver soc_codec_device_cs42l51 = { .probe = cs42l51_probe, - .reg_cache_size = CS42L51_NUMREGS, + .reg_cache_size = CS42L51_NUMREGS + 1, .reg_word_size = sizeof(u8), }; From b1807719f6acdf18cc4bde3b5400d05d77801494 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 16 Nov 2011 11:39:52 +0100 Subject: [PATCH 052/364] HID: Correct General touch PID Genera Touch told us that 0001 is their single point device and 0003 is the multitouch one. Apparently, we made the tests someone having a prototype, and not the final product. They said it should be safe to do the switch. This partially reverts 5572da0 ("HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'"). Signed-off-by: Benjamin Tissoires Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 +- drivers/hid/hid-ids.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 848a56c0279c..af353842f75f 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1771,8 +1771,8 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0004) }, { HID_USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30) }, { HID_USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 06ce996b8b65..4a441a6f9967 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -266,7 +266,7 @@ #define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002 #define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc -#define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0001 +#define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0003 #define USB_VENDOR_ID_GLAB 0x06c2 #define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038 From 5ff1ddf22b2584d00d7e0ba5a8eab07b5338bd84 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 23 Nov 2011 22:37:00 +0800 Subject: [PATCH 053/364] ASoC: skip resume of soc-audio devices without codecs There are cases where there is no working codec on the soc-audio devices, and snd_soc_suspend() will skip such device when suspending. Yet its counterpart snd_soc_resume() does not check this, causing complaints about spinlock lockup: [ 176.726087] BUG: spinlock lockup on CPU#0, kworker/0:2/1067, d8ab82a8 [ 176.732539] [<80014a14>] (unwind_backtrace+0x0/0xec) from [<805b3fc8>] (dump_stack+0x20/0x24) [ 176.741082] [<805b3fc8>] (dump_stack+0x20/0x24) from [<80322208>] (do_raw_spin_lock+0x118/0x158) [ 176.749882] [<80322208>] (do_raw_spin_lock+0x118/0x158) from [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) [ 176.759723] [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) from [<8002a020>] (__wake_up+0x2c/0x5c) [ 176.768781] [<8002a020>] (__wake_up+0x2c/0x5c) from [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) [ 176.777666] [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) from [<8004ee20>] (process_one_work+0x2e8/0x50c) [ 176.787334] [<8004ee20>] (process_one_work+0x2e8/0x50c) from [<8004fd08>] (worker_thread+0x1c8/0x2e0) [ 176.796566] [<8004fd08>] (worker_thread+0x1c8/0x2e0) from [<80053ec8>] (kthread+0xa4/0xb0) [ 176.804843] [<80053ec8>] (kthread+0xa4/0xb0) from [<8000ea70>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Eric Miao Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index a5d3685a5d38..a25fa63ce9a2 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -709,6 +709,12 @@ int snd_soc_resume(struct device *dev) struct snd_soc_card *card = dev_get_drvdata(dev); int i, ac97_control = 0; + /* If the initialization of this soc device failed, there is no codec + * associated with it. Just bail out in this case. + */ + if (list_empty(&card->codec_dev_list)) + return 0; + /* AC97 devices might have other drivers hanging off them so * need to resume immediately. Other drivers don't have that * problem and may take a substantial amount of time to resume From c16a98ed91597b40b22b540c6517103497ef8e74 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 23 Nov 2011 15:49:31 -0500 Subject: [PATCH 054/364] ipv6: tcp: fix panic in SYN processing commit 72a3effaf633bc ([NET]: Size listen hash tables using backlog hint) added a bug allowing inet6_synq_hash() to return an out of bound array index, because of u16 overflow. Bug can happen if system admins set net.core.somaxconn & net.ipv4.tcp_max_syn_backlog sysctls to values greater than 65536 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/inet6_connection_sock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c index fee46d5a2f12..1567fb120392 100644 --- a/net/ipv6/inet6_connection_sock.c +++ b/net/ipv6/inet6_connection_sock.c @@ -85,7 +85,7 @@ struct dst_entry *inet6_csk_route_req(struct sock *sk, * request_sock (formerly open request) hash tables. */ static u32 inet6_synq_hash(const struct in6_addr *raddr, const __be16 rport, - const u32 rnd, const u16 synq_hsize) + const u32 rnd, const u32 synq_hsize) { u32 c; From 46a246c4dff9f248913e791b69f2336cd8d4ec41 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 23 Nov 2011 16:07:00 -0500 Subject: [PATCH 055/364] netfilter: Remove NOTRACK/RAW dependency on NETFILTER_ADVANCED. Distributions are using this in their default scripts, so don't hide them behind the advanced setting. Reported-by: Linus Torvalds Signed-off-by: David S. Miller --- net/ipv4/netfilter/Kconfig | 1 - net/ipv6/netfilter/Kconfig | 1 - net/netfilter/Kconfig | 1 - 3 files changed, 3 deletions(-) diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index 1dfc18a03fd4..f19f2182894c 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -325,7 +325,6 @@ config IP_NF_TARGET_TTL # raw + specific targets config IP_NF_RAW tristate 'raw table support (required for NOTRACK/TRACE)' - depends on NETFILTER_ADVANCED help This option adds a `raw' table to iptables. This table is the very first in the netfilter framework and hooks in at the PREROUTING diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig index 448464844a25..f792b34cbe9c 100644 --- a/net/ipv6/netfilter/Kconfig +++ b/net/ipv6/netfilter/Kconfig @@ -186,7 +186,6 @@ config IP6_NF_MANGLE config IP6_NF_RAW tristate 'raw table support (required for TRACE)' - depends on NETFILTER_ADVANCED help This option adds a `raw' table to ip6tables. This table is the very first in the netfilter framework and hooks in at the PREROUTING diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 8260b13d93c9..e8f379692294 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -542,7 +542,6 @@ config NETFILTER_XT_TARGET_NOTRACK tristate '"NOTRACK" target support' depends on IP_NF_RAW || IP6_NF_RAW depends on NF_CONNTRACK - depends on NETFILTER_ADVANCED help The NOTRACK target allows a select rule to specify which packets *not* to enter the conntrack/NAT From 15ac2b08a2fd0f4aacbe8ae39788252fea6fbe63 Mon Sep 17 00:00:00 2001 From: Xander Hover Date: Wed, 23 Nov 2011 16:40:31 -0500 Subject: [PATCH 056/364] b44: Use dev_kfree_skb_irq() in b44_tx() Reported issues when using dev_kfree_skb() on UP systems and systems with low numbers of cores. dev_kfree_skb_irq() will properly save IRQ state before freeing the skb. Tested on 3.1.1 and 3.2_rc2 Example of reproducible trace of kernel 3.1.1 ------------[ cut here ]------------ WARNING: at kernel/softirq.c:159 local_bh_enable+0x32/0x79() ... Pid: 0, comm: swapper Not tainted 3.1.1-gentoo #1 Call Trace: [] warn_slowpath_common+0x65/0x7a [] ? local_bh_enable+0x32/0x79 [] warn_slowpath_null+0xf/0x13 [] local_bh_enable+0x32/0x79 [] destroy_conntrack+0x7c/0x9b [] nf_conntrack_destroy+0x1f/0x26 [] skb_release_head_state+0x74/0x83 [] __kfree_skb+0xb/0x6b [] consume_skb+0x24/0x26 [] b44_poll+0xaa/0x449 [] net_rx_action+0x3f/0xea [] __do_softirq+0x5f/0xd5 [] ? local_bh_enable+0x79/0x79 [] ? irq_exit+0x34/0x8d [] ? do_IRQ+0x74/0x87 [] ? common_interrupt+0x29/0x30 [] ? default_idle+0x29/0x3e [] ? cpu_idle+0x2f/0x5d [] ? rest_init+0x79/0x7b [] ? start_kernel+0x297/0x29c [] ? i386_start_kernel+0xb0/0xb7 ---[ end trace 583f33bb1aa207a9 ]--- Signed-off-by: Xander Hover Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/b44.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 4cf835dbc122..3fb66d09ece5 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -608,7 +608,7 @@ static void b44_tx(struct b44 *bp) skb->len, DMA_TO_DEVICE); rp->skb = NULL; - dev_kfree_skb(skb); + dev_kfree_skb_irq(skb); } bp->tx_cons = cons; From 4d0fe50c75a547088e4304e5eb5f521514dfae46 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 23 Nov 2011 17:29:23 -0500 Subject: [PATCH 057/364] ipv6: tcp: fix tcp_v6_conn_request() Since linux 2.6.26 (commit c6aefafb7ec6 : Add IPv6 support to TCP SYN cookies), we can drop a SYN packet reusing a TIME_WAIT socket. (As a matter of fact we fail to send the SYNACK answer) As the client resends its SYN packet after a one second timeout, we accept it, because first packet removed the TIME_WAIT socket before being dropped. This probably explains why nobody ever noticed or complained. Reported-by: Jesse Young Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/tcp_ipv6.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 36131d122a6f..2dea4bb7b54a 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1255,6 +1255,13 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) if (!want_cookie || tmp_opt.tstamp_ok) TCP_ECN_create_request(req, tcp_hdr(skb)); + treq->iif = sk->sk_bound_dev_if; + + /* So that link locals have meaning */ + if (!sk->sk_bound_dev_if && + ipv6_addr_type(&treq->rmt_addr) & IPV6_ADDR_LINKLOCAL) + treq->iif = inet6_iif(skb); + if (!isn) { struct inet_peer *peer = NULL; @@ -1264,12 +1271,6 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) atomic_inc(&skb->users); treq->pktopts = skb; } - treq->iif = sk->sk_bound_dev_if; - - /* So that link locals have meaning */ - if (!sk->sk_bound_dev_if && - ipv6_addr_type(&treq->rmt_addr) & IPV6_ADDR_LINKLOCAL) - treq->iif = inet6_iif(skb); if (want_cookie) { isn = cookie_v6_init_sequence(sk, skb, &req->mss); From 685f94e6db8496399c881218018166515445a914 Mon Sep 17 00:00:00 2001 From: Jun Zhao Date: Tue, 22 Nov 2011 17:19:03 +0000 Subject: [PATCH 058/364] ipv4 : igmp : fix error handle in ip_mc_add_src() When add sources to interface failure, need to roll back the sfcount[MODE] to before state. We need to match it corresponding. Acked-by: David L Stevens Acked-by: Eric Dumazet Signed-off-by: Jun Zhao Signed-off-by: David S. Miller --- net/ipv4/igmp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index c7472eff2d51..b2ca095cb9da 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -1716,7 +1716,8 @@ static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode, if (err) { int j; - pmc->sfcount[sfmode]--; + if (!delta) + pmc->sfcount[sfmode]--; for (j=0; jsfcount[MCAST_EXCLUDE] != 0)) { From 1d125bd52e1e1b9810a2d5a32a76147912fa4133 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 23 Nov 2011 03:54:08 +0000 Subject: [PATCH 059/364] bnx2x: Fix 5461x LED Fix port identify test on 5461x PHY by driving LEDs through MDIO. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 39 ++++++++++++++++++- .../net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 1 + 2 files changed, 39 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index bce203fa4b9e..882f48f0a03c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -10327,6 +10327,43 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy, return 0; } + +static void bnx2x_5461x_set_link_led(struct bnx2x_phy *phy, + struct link_params *params, u8 mode) +{ + struct bnx2x *bp = params->bp; + u16 temp; + + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_LED_SEL1); + bnx2x_cl22_read(bp, phy, + MDIO_REG_GPHY_SHADOW, + &temp); + temp &= 0xff00; + + DP(NETIF_MSG_LINK, "54618x set link led (mode=%x)\n", mode); + switch (mode) { + case LED_MODE_FRONT_PANEL_OFF: + case LED_MODE_OFF: + temp |= 0x00ee; + break; + case LED_MODE_OPER: + temp |= 0x0001; + break; + case LED_MODE_ON: + temp |= 0x00ff; + break; + default: + break; + } + bnx2x_cl22_write(bp, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_WR_ENA | temp); + return; +} + + static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy, struct link_params *params) { @@ -11103,7 +11140,7 @@ static struct bnx2x_phy phy_54618se = { .config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback, .format_fw_ver = (format_fw_ver_t)NULL, .hw_reset = (hw_reset_t)NULL, - .set_link_led = (set_link_led_t)NULL, + .set_link_led = (set_link_led_t)bnx2x_5461x_set_link_led, .phy_specific_func = (phy_specific_func_t)NULL }; /*****************************************************************/ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index fc7bd0f23c0b..e58073ef33b4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -6990,6 +6990,7 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_REG_INTR_MASK 0x1b #define MDIO_REG_INTR_MASK_LINK_STATUS (0x1 << 1) #define MDIO_REG_GPHY_SHADOW 0x1c +#define MDIO_REG_GPHY_SHADOW_LED_SEL1 (0x0d << 10) #define MDIO_REG_GPHY_SHADOW_LED_SEL2 (0x0e << 10) #define MDIO_REG_GPHY_SHADOW_WR_ENA (0x1 << 15) #define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10) From 782428535e0819b5b7c9825cd3faa2ad37032a70 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 23 Nov 2011 13:10:42 +0000 Subject: [PATCH 060/364] qlge: fix size of external list for TX address descriptors When transmiting a fragmented skb, qlge fills a descriptor with the fragment addresses, after DMA-mapping them. If there are more than eight fragments, it will use the eighth descriptor as a pointer to an external list. After mapping this external list, called OAL to a structure containing more descriptors, it fills it with the extra fragments. However, considering that systems with pages larger than 8KiB would have less than 8 fragments, which was true before commit a715dea3c8e, it defined a macro for the OAL size as 0 in those cases. Now, if a skb with more than 8 fragments (counting skb->data as one fragment), this would start overwriting the list of addresses already mapped and would make the driver fail to properly unmap the right addresses on architectures with pages larger than 8KiB. Besides that, the list of mappings was one size too small, since it must have a mapping for the maxinum number of skb fragments plus one for skb->data and another for the OAL. So, even on architectures with page sizes 4KiB and 8KiB, a skb with the maximum number of fragments would make the driver overwrite its counter for the number of mappings, which, again, would make it fail to unmap the mapped DMA addresses. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlge/qlge.h b/drivers/net/ethernet/qlogic/qlge/qlge.h index 8731f79c9efc..b8478aab050e 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge.h +++ b/drivers/net/ethernet/qlogic/qlge/qlge.h @@ -58,10 +58,8 @@ #define TX_DESC_PER_IOCB 8 -/* The maximum number of frags we handle is based - * on PAGE_SIZE... - */ -#if (PAGE_SHIFT == 12) || (PAGE_SHIFT == 13) /* 4k & 8k pages */ + +#if ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2) > 0 #define TX_DESC_PER_OAL ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2) #else /* all other page sizes */ #define TX_DESC_PER_OAL 0 @@ -1353,7 +1351,7 @@ struct tx_ring_desc { struct ob_mac_iocb_req *queue_entry; u32 index; struct oal oal; - struct map_list map[MAX_SKB_FRAGS + 1]; + struct map_list map[MAX_SKB_FRAGS + 2]; int map_cnt; struct tx_ring_desc *next; }; From aa9084a01a7893a9f4bed98aa29081f15d403a88 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 23 Nov 2011 00:13:02 +0000 Subject: [PATCH 061/364] ehea: Reduce memory usage in buffer pools Now that we enable multiqueue by default the ehea driver is using quite a lot of memory for its buffer pools. With 4 queues we consume 64MB in the jumbo packet ring, 16MB in the medium packet ring and 16MB in the tiny packet ring. We should only fill the jumbo ring once the MTU is increased but for now halve it's size so it consumes 32MB. Also reduce the tiny packet ring, with 4 queues we had 16k entries which is overkill. Signed-off-by: Anton Blanchard Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/ibm/ehea/ehea.h b/drivers/net/ethernet/ibm/ehea/ehea.h index 410d6a1984ed..6650068c996c 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea.h +++ b/drivers/net/ethernet/ibm/ehea/ehea.h @@ -61,9 +61,9 @@ #ifdef EHEA_SMALL_QUEUES #define EHEA_MAX_CQE_COUNT 1023 #define EHEA_DEF_ENTRIES_SQ 1023 -#define EHEA_DEF_ENTRIES_RQ1 4095 +#define EHEA_DEF_ENTRIES_RQ1 1023 #define EHEA_DEF_ENTRIES_RQ2 1023 -#define EHEA_DEF_ENTRIES_RQ3 1023 +#define EHEA_DEF_ENTRIES_RQ3 511 #else #define EHEA_MAX_CQE_COUNT 4080 #define EHEA_DEF_ENTRIES_SQ 4080 From 67c170a24fc6669f8f7c0864d75caadef0a8e5e6 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 23 Nov 2011 00:13:54 +0000 Subject: [PATCH 062/364] ehea: Use round_jiffies_relative to align workqueue Use round_jiffies_relative to align the ehea workqueue and avoid extra wakeups. Signed-off-by: Anton Blanchard Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 37b70f7052b6..bfeccbfde236 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -371,7 +371,8 @@ static void ehea_update_stats(struct work_struct *work) out_herr: free_page((unsigned long)cb2); resched: - schedule_delayed_work(&port->stats_work, msecs_to_jiffies(1000)); + schedule_delayed_work(&port->stats_work, + round_jiffies_relative(msecs_to_jiffies(1000))); } static void ehea_refill_rq1(struct ehea_port_res *pr, int index, int nr_of_wqes) @@ -2434,7 +2435,8 @@ static int ehea_open(struct net_device *dev) } mutex_unlock(&port->port_lock); - schedule_delayed_work(&port->stats_work, msecs_to_jiffies(1000)); + schedule_delayed_work(&port->stats_work, + round_jiffies_relative(msecs_to_jiffies(1000))); return ret; } From ac8a48106be49c422575ddc7531b776f8eb49610 Mon Sep 17 00:00:00 2001 From: Li Wei Date: Tue, 22 Nov 2011 23:33:10 +0000 Subject: [PATCH 063/364] ipv4: Save nexthop address of LSRR/SSRR option to IPCB. We can not update iph->daddr in ip_options_rcv_srr(), It is too early. When some exception ocurred later (eg. in ip_forward() when goto sr_failed) we need the ip header be identical to the original one as ICMP need it. Add a field 'nexthop' in struct ip_options to save nexthop of LSRR or SSRR option. Signed-off-by: Li Wei Signed-off-by: David S. Miller --- include/net/inet_sock.h | 2 ++ net/ipv4/ip_forward.c | 2 +- net/ipv4/ip_options.c | 5 +++-- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h index b897d6e6d0a5..f941964a9931 100644 --- a/include/net/inet_sock.h +++ b/include/net/inet_sock.h @@ -31,6 +31,7 @@ /** struct ip_options - IP Options * * @faddr - Saved first hop address + * @nexthop - Saved nexthop address in LSRR and SSRR * @is_data - Options in __data, rather than skb * @is_strictroute - Strict source route * @srr_is_hit - Packet destination addr was our one @@ -41,6 +42,7 @@ */ struct ip_options { __be32 faddr; + __be32 nexthop; unsigned char optlen; unsigned char srr; unsigned char rr; diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c index 3b34d1c86270..29a07b6c7168 100644 --- a/net/ipv4/ip_forward.c +++ b/net/ipv4/ip_forward.c @@ -84,7 +84,7 @@ int ip_forward(struct sk_buff *skb) rt = skb_rtable(skb); - if (opt->is_strictroute && ip_hdr(skb)->daddr != rt->rt_gateway) + if (opt->is_strictroute && opt->nexthop != rt->rt_gateway) goto sr_failed; if (unlikely(skb->len > dst_mtu(&rt->dst) && !skb_is_gso(skb) && diff --git a/net/ipv4/ip_options.c b/net/ipv4/ip_options.c index 05d20cca9d66..1e60f7679075 100644 --- a/net/ipv4/ip_options.c +++ b/net/ipv4/ip_options.c @@ -568,12 +568,13 @@ void ip_forward_options(struct sk_buff *skb) ) { if (srrptr + 3 > srrspace) break; - if (memcmp(&ip_hdr(skb)->daddr, &optptr[srrptr-1], 4) == 0) + if (memcmp(&opt->nexthop, &optptr[srrptr-1], 4) == 0) break; } if (srrptr + 3 <= srrspace) { opt->is_changed = 1; ip_rt_get_source(&optptr[srrptr-1], skb, rt); + ip_hdr(skb)->daddr = opt->nexthop; optptr[2] = srrptr+4; } else if (net_ratelimit()) printk(KERN_CRIT "ip_forward(): Argh! Destination lost!\n"); @@ -640,7 +641,7 @@ int ip_options_rcv_srr(struct sk_buff *skb) } if (srrptr <= srrspace) { opt->srr_is_hit = 1; - iph->daddr = nexthop; + opt->nexthop = nexthop; opt->is_changed = 1; } return 0; From 42ca0203fd59aa9be7b241be1fbc3bef1f903f9c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 23 Nov 2011 21:18:20 +0000 Subject: [PATCH 064/364] net/netlabel: copy and paste bug in netlbl_cfg_unlbl_map_add() This was copy and pasted from the IPv4 code. We're calling the ip4 version of that function and map4 is NULL. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- net/netlabel/netlabel_kapi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c index 9c24de10a657..7b372a763c60 100644 --- a/net/netlabel/netlabel_kapi.c +++ b/net/netlabel/netlabel_kapi.c @@ -162,8 +162,8 @@ int netlbl_cfg_unlbl_map_add(const char *domain, map6->list.addr.s6_addr32[3] &= mask6->s6_addr32[3]; ipv6_addr_copy(&map6->list.mask, mask6); map6->list.valid = 1; - ret_val = netlbl_af4list_add(&map4->list, - &addrmap->list4); + ret_val = netlbl_af6list_add(&map6->list, + &addrmap->list6); if (ret_val != 0) goto cfg_unlbl_map_add_failure; break; From df07a94cf50eb73d09bf2350c3fe2598e4cbeee1 Mon Sep 17 00:00:00 2001 From: "Jorge Boncompte [DTI2]" Date: Fri, 25 Nov 2011 13:24:49 -0500 Subject: [PATCH 065/364] netns: fix proxy ARP entries listing on a netns Skip entries from foreign network namespaces. Signed-off-by: Jorge Boncompte [DTI2] Signed-off-by: David S. Miller --- net/core/neighbour.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 039d51e6c284..5ac07d31fbc9 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -2397,7 +2397,10 @@ static struct pneigh_entry *pneigh_get_next(struct seq_file *seq, struct net *net = seq_file_net(seq); struct neigh_table *tbl = state->tbl; - pn = pn->next; + do { + pn = pn->next; + } while (pn && !net_eq(pneigh_net(pn), net)); + while (!pn) { if (++state->bucket > PNEIGH_HASHMASK) break; From 6b600b26c0215bf9ed04062ecfacf0bc20e2588c Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 23 Nov 2011 02:12:13 +0000 Subject: [PATCH 066/364] route: Use the device mtu as the default for blackhole routes As it is, we return null as the default mtu of blackhole routes. This may lead to a propagation of a bogus pmtu if the default_mtu method of a blackhole route is invoked. So return dst->dev->mtu as the default mtu instead. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv4/route.c | 2 +- net/ipv6/route.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 0c74da8a0473..5b17bf124a33 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2757,7 +2757,7 @@ static struct dst_entry *ipv4_blackhole_dst_check(struct dst_entry *dst, u32 coo static unsigned int ipv4_blackhole_default_mtu(const struct dst_entry *dst) { - return 0; + return dst->dev->mtu; } static void ipv4_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 8473016bba4a..d8fbd18c9467 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -157,7 +157,7 @@ static struct dst_ops ip6_dst_ops_template = { static unsigned int ip6_blackhole_default_mtu(const struct dst_entry *dst) { - return 0; + return dst->dev->mtu; } static void ip6_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) From ebb762f27fed083cb993a0816393aba4615f6544 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 23 Nov 2011 02:12:51 +0000 Subject: [PATCH 067/364] net: Rename the dst_opt default_mtu method to mtu We plan to invoke the dst_opt->default_mtu() method unconditioally from dst_mtu(). So rename the method to dst_opt->mtu() to match the name with the new meaning. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- include/net/dst.h | 2 +- include/net/dst_ops.h | 2 +- net/decnet/dn_route.c | 6 +++--- net/ipv4/route.c | 10 +++++----- net/ipv6/route.c | 10 +++++----- net/xfrm/xfrm_policy.c | 6 +++--- 6 files changed, 18 insertions(+), 18 deletions(-) diff --git a/include/net/dst.h b/include/net/dst.h index 4fb6c4381791..666de31d8e7d 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -208,7 +208,7 @@ static inline u32 dst_mtu(const struct dst_entry *dst) u32 mtu = dst_metric_raw(dst, RTAX_MTU); if (!mtu) - mtu = dst->ops->default_mtu(dst); + mtu = dst->ops->mtu(dst); return mtu; } diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h index 9adb99845a56..e1c2ee0eef47 100644 --- a/include/net/dst_ops.h +++ b/include/net/dst_ops.h @@ -17,7 +17,7 @@ struct dst_ops { int (*gc)(struct dst_ops *ops); struct dst_entry * (*check)(struct dst_entry *, __u32 cookie); unsigned int (*default_advmss)(const struct dst_entry *); - unsigned int (*default_mtu)(const struct dst_entry *); + unsigned int (*mtu)(const struct dst_entry *); u32 * (*cow_metrics)(struct dst_entry *, unsigned long); void (*destroy)(struct dst_entry *); void (*ifdown)(struct dst_entry *, diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c index a77d16158eb6..db4867963247 100644 --- a/net/decnet/dn_route.c +++ b/net/decnet/dn_route.c @@ -112,7 +112,7 @@ static unsigned long dn_rt_deadline; static int dn_dst_gc(struct dst_ops *ops); static struct dst_entry *dn_dst_check(struct dst_entry *, __u32); static unsigned int dn_dst_default_advmss(const struct dst_entry *dst); -static unsigned int dn_dst_default_mtu(const struct dst_entry *dst); +static unsigned int dn_dst_mtu(const struct dst_entry *dst); static void dn_dst_destroy(struct dst_entry *); static struct dst_entry *dn_dst_negative_advice(struct dst_entry *); static void dn_dst_link_failure(struct sk_buff *); @@ -135,7 +135,7 @@ static struct dst_ops dn_dst_ops = { .gc = dn_dst_gc, .check = dn_dst_check, .default_advmss = dn_dst_default_advmss, - .default_mtu = dn_dst_default_mtu, + .mtu = dn_dst_mtu, .cow_metrics = dst_cow_metrics_generic, .destroy = dn_dst_destroy, .negative_advice = dn_dst_negative_advice, @@ -825,7 +825,7 @@ static unsigned int dn_dst_default_advmss(const struct dst_entry *dst) return dn_mss_from_pmtu(dst->dev, dst_mtu(dst)); } -static unsigned int dn_dst_default_mtu(const struct dst_entry *dst) +static unsigned int dn_dst_mtu(const struct dst_entry *dst) { return dst->dev->mtu; } diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 5b17bf124a33..f1ac3efc5524 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -138,7 +138,7 @@ static int rt_chain_length_max __read_mostly = 20; static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie); static unsigned int ipv4_default_advmss(const struct dst_entry *dst); -static unsigned int ipv4_default_mtu(const struct dst_entry *dst); +static unsigned int ipv4_mtu(const struct dst_entry *dst); static void ipv4_dst_destroy(struct dst_entry *dst); static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst); static void ipv4_link_failure(struct sk_buff *skb); @@ -193,7 +193,7 @@ static struct dst_ops ipv4_dst_ops = { .gc = rt_garbage_collect, .check = ipv4_dst_check, .default_advmss = ipv4_default_advmss, - .default_mtu = ipv4_default_mtu, + .mtu = ipv4_mtu, .cow_metrics = ipv4_cow_metrics, .destroy = ipv4_dst_destroy, .ifdown = ipv4_dst_ifdown, @@ -1814,7 +1814,7 @@ static unsigned int ipv4_default_advmss(const struct dst_entry *dst) return advmss; } -static unsigned int ipv4_default_mtu(const struct dst_entry *dst) +static unsigned int ipv4_mtu(const struct dst_entry *dst) { unsigned int mtu = dst->dev->mtu; @@ -2755,7 +2755,7 @@ static struct dst_entry *ipv4_blackhole_dst_check(struct dst_entry *dst, u32 coo return NULL; } -static unsigned int ipv4_blackhole_default_mtu(const struct dst_entry *dst) +static unsigned int ipv4_blackhole_mtu(const struct dst_entry *dst) { return dst->dev->mtu; } @@ -2775,7 +2775,7 @@ static struct dst_ops ipv4_dst_blackhole_ops = { .protocol = cpu_to_be16(ETH_P_IP), .destroy = ipv4_dst_destroy, .check = ipv4_blackhole_dst_check, - .default_mtu = ipv4_blackhole_default_mtu, + .mtu = ipv4_blackhole_mtu, .default_advmss = ipv4_default_advmss, .update_pmtu = ipv4_rt_blackhole_update_pmtu, .cow_metrics = ipv4_rt_blackhole_cow_metrics, diff --git a/net/ipv6/route.c b/net/ipv6/route.c index d8fbd18c9467..76645d7077ff 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -77,7 +77,7 @@ static struct rt6_info *ip6_rt_copy(const struct rt6_info *ort, const struct in6_addr *dest); static struct dst_entry *ip6_dst_check(struct dst_entry *dst, u32 cookie); static unsigned int ip6_default_advmss(const struct dst_entry *dst); -static unsigned int ip6_default_mtu(const struct dst_entry *dst); +static unsigned int ip6_mtu(const struct dst_entry *dst); static struct dst_entry *ip6_negative_advice(struct dst_entry *); static void ip6_dst_destroy(struct dst_entry *); static void ip6_dst_ifdown(struct dst_entry *, @@ -144,7 +144,7 @@ static struct dst_ops ip6_dst_ops_template = { .gc_thresh = 1024, .check = ip6_dst_check, .default_advmss = ip6_default_advmss, - .default_mtu = ip6_default_mtu, + .mtu = ip6_mtu, .cow_metrics = ipv6_cow_metrics, .destroy = ip6_dst_destroy, .ifdown = ip6_dst_ifdown, @@ -155,7 +155,7 @@ static struct dst_ops ip6_dst_ops_template = { .neigh_lookup = ip6_neigh_lookup, }; -static unsigned int ip6_blackhole_default_mtu(const struct dst_entry *dst) +static unsigned int ip6_blackhole_mtu(const struct dst_entry *dst) { return dst->dev->mtu; } @@ -175,7 +175,7 @@ static struct dst_ops ip6_dst_blackhole_ops = { .protocol = cpu_to_be16(ETH_P_IPV6), .destroy = ip6_dst_destroy, .check = ip6_dst_check, - .default_mtu = ip6_blackhole_default_mtu, + .mtu = ip6_blackhole_mtu, .default_advmss = ip6_default_advmss, .update_pmtu = ip6_rt_blackhole_update_pmtu, .cow_metrics = ip6_rt_blackhole_cow_metrics, @@ -1041,7 +1041,7 @@ static unsigned int ip6_default_advmss(const struct dst_entry *dst) return mtu; } -static unsigned int ip6_default_mtu(const struct dst_entry *dst) +static unsigned int ip6_mtu(const struct dst_entry *dst) { unsigned int mtu = IPV6_MIN_MTU; struct inet6_dev *idev; diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 552df27dcf53..b8be51eb7e29 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2382,7 +2382,7 @@ static unsigned int xfrm_default_advmss(const struct dst_entry *dst) return dst_metric_advmss(dst->path); } -static unsigned int xfrm_default_mtu(const struct dst_entry *dst) +static unsigned int xfrm_mtu(const struct dst_entry *dst) { return dst_mtu(dst->path); } @@ -2411,8 +2411,8 @@ int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo) dst_ops->check = xfrm_dst_check; if (likely(dst_ops->default_advmss == NULL)) dst_ops->default_advmss = xfrm_default_advmss; - if (likely(dst_ops->default_mtu == NULL)) - dst_ops->default_mtu = xfrm_default_mtu; + if (likely(dst_ops->mtu == NULL)) + dst_ops->mtu = xfrm_mtu; if (likely(dst_ops->negative_advice == NULL)) dst_ops->negative_advice = xfrm_negative_advice; if (likely(dst_ops->link_failure == NULL)) From 618f9bc74a039da76fa027ac2600c5b785b964c5 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 23 Nov 2011 02:13:31 +0000 Subject: [PATCH 068/364] net: Move mtu handling down to the protocol depended handlers We move all mtu handling from dst_mtu() down to the protocol layer. So each protocol can implement the mtu handling in a different manner. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- include/net/dst.h | 7 +------ net/decnet/dn_route.c | 4 +++- net/ipv4/route.c | 11 +++++++++-- net/ipv6/route.c | 11 +++++++++-- net/xfrm/xfrm_policy.c | 4 +++- 5 files changed, 25 insertions(+), 12 deletions(-) diff --git a/include/net/dst.h b/include/net/dst.h index 666de31d8e7d..6faec1a60216 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -205,12 +205,7 @@ dst_feature(const struct dst_entry *dst, u32 feature) static inline u32 dst_mtu(const struct dst_entry *dst) { - u32 mtu = dst_metric_raw(dst, RTAX_MTU); - - if (!mtu) - mtu = dst->ops->mtu(dst); - - return mtu; + return dst->ops->mtu(dst); } /* RTT metrics are stored in milliseconds for user ABI, but used as jiffies */ diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c index db4867963247..94f4ec036669 100644 --- a/net/decnet/dn_route.c +++ b/net/decnet/dn_route.c @@ -827,7 +827,9 @@ static unsigned int dn_dst_default_advmss(const struct dst_entry *dst) static unsigned int dn_dst_mtu(const struct dst_entry *dst) { - return dst->dev->mtu; + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + return mtu ? : dst->dev->mtu; } static struct neighbour *dn_dst_neigh_lookup(const struct dst_entry *dst, const void *daddr) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index f1ac3efc5524..11d1b2080a16 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1816,7 +1816,12 @@ static unsigned int ipv4_default_advmss(const struct dst_entry *dst) static unsigned int ipv4_mtu(const struct dst_entry *dst) { - unsigned int mtu = dst->dev->mtu; + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + if (mtu) + return mtu; + + mtu = dst->dev->mtu; if (unlikely(dst_metric_locked(dst, RTAX_MTU))) { const struct rtable *rt = (const struct rtable *) dst; @@ -2757,7 +2762,9 @@ static struct dst_entry *ipv4_blackhole_dst_check(struct dst_entry *dst, u32 coo static unsigned int ipv4_blackhole_mtu(const struct dst_entry *dst) { - return dst->dev->mtu; + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + return mtu ? : dst->dev->mtu; } static void ipv4_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 76645d7077ff..3399dd326287 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -157,7 +157,9 @@ static struct dst_ops ip6_dst_ops_template = { static unsigned int ip6_blackhole_mtu(const struct dst_entry *dst) { - return dst->dev->mtu; + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + return mtu ? : dst->dev->mtu; } static void ip6_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) @@ -1043,8 +1045,13 @@ static unsigned int ip6_default_advmss(const struct dst_entry *dst) static unsigned int ip6_mtu(const struct dst_entry *dst) { - unsigned int mtu = IPV6_MIN_MTU; struct inet6_dev *idev; + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + if (mtu) + return mtu; + + mtu = IPV6_MIN_MTU; rcu_read_lock(); idev = __in6_dev_get(dst->dev); diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index b8be51eb7e29..2118d6446630 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2384,7 +2384,9 @@ static unsigned int xfrm_default_advmss(const struct dst_entry *dst) static unsigned int xfrm_mtu(const struct dst_entry *dst) { - return dst_mtu(dst->path); + unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); + + return mtu ? : dst_mtu(dst->path); } static struct neighbour *xfrm_neigh_lookup(const struct dst_entry *dst, const void *daddr) From b8400f3718a11c9b0ca400705cddf94f3132c1c3 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 23 Nov 2011 02:14:15 +0000 Subject: [PATCH 069/364] route: struct rtable can be const in rt_is_input_route and rt_is_output_route Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- include/net/route.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/net/route.h b/include/net/route.h index db7b3432f07c..91855d185b53 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -71,12 +71,12 @@ struct rtable { struct fib_info *fi; /* for client ref to shared metrics */ }; -static inline bool rt_is_input_route(struct rtable *rt) +static inline bool rt_is_input_route(const struct rtable *rt) { return rt->rt_route_iif != 0; } -static inline bool rt_is_output_route(struct rtable *rt) +static inline bool rt_is_output_route(const struct rtable *rt) { return rt->rt_route_iif == 0; } From 261663b0ee2ee8e3947f4c11c1a08be18cd2cea1 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 23 Nov 2011 02:14:50 +0000 Subject: [PATCH 070/364] ipv4: Don't use the cached pmtu informations for input routes The pmtu informations on the inetpeer are visible for output and input routes. On packet forwarding, we might propagate a learned pmtu to the sender. As we update the pmtu informations of the inetpeer on demand, the original sender of the forwarded packets might never notice when the pmtu to that inetpeer increases. So use the mtu of the outgoing device on packet forwarding instead of the pmtu to the final destination. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv4/route.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 11d1b2080a16..fb47c8f0cd86 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1816,15 +1816,15 @@ static unsigned int ipv4_default_advmss(const struct dst_entry *dst) static unsigned int ipv4_mtu(const struct dst_entry *dst) { + const struct rtable *rt = (const struct rtable *) dst; unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); - if (mtu) + if (mtu && rt_is_output_route(rt)) return mtu; mtu = dst->dev->mtu; if (unlikely(dst_metric_locked(dst, RTAX_MTU))) { - const struct rtable *rt = (const struct rtable *) dst; if (rt->rt_gateway != rt->rt_dst && mtu > 576) mtu = 576; From fc0b927d9a5024e138c4318fe19a590f23e3eeec Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 25 Nov 2011 14:40:02 +0000 Subject: [PATCH 071/364] net: Revert ARCNET and PHYLIB to tristate options commit 88491d8103498a6166f70d5999902fec70924314 ("drivers/net: Kconfig & Makefile cleanup") changed the type of these options to bool, but they select code that could (and still can) be built as modules. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/arcnet/Kconfig | 2 +- drivers/net/phy/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig index a73d9dc80ff6..84fb6349a59a 100644 --- a/drivers/net/arcnet/Kconfig +++ b/drivers/net/arcnet/Kconfig @@ -4,7 +4,7 @@ menuconfig ARCNET depends on NETDEVICES && (ISA || PCI || PCMCIA) - bool "ARCnet support" + tristate "ARCnet support" ---help--- If you have a network card of this type, say Y and check out the (arguably) beautiful poetry in diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index bb88e12101c7..a70244306c94 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -3,7 +3,7 @@ # menuconfig PHYLIB - bool "PHY Device support and infrastructure" + tristate "PHY Device support and infrastructure" depends on !S390 depends on NETDEVICES help From 8a6e77d5209e459a9ec5c268c39800c06cd1dc86 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 21 Nov 2011 00:21:55 +0000 Subject: [PATCH 072/364] decnet: proper socket refcounting Better use sk_reset_timer() / sk_stop_timer() helpers to make sure we dont access already freed/reused memory later. Reported-by: Sasha Levin Signed-off-by: Eric Dumazet Tested-by: Sasha Levin Signed-off-by: David S. Miller --- net/decnet/dn_timer.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/net/decnet/dn_timer.c b/net/decnet/dn_timer.c index 67f691bd4acf..d9c150cc59a9 100644 --- a/net/decnet/dn_timer.c +++ b/net/decnet/dn_timer.c @@ -36,16 +36,13 @@ static void dn_slow_timer(unsigned long arg); void dn_start_slow_timer(struct sock *sk) { - sk->sk_timer.expires = jiffies + SLOW_INTERVAL; - sk->sk_timer.function = dn_slow_timer; - sk->sk_timer.data = (unsigned long)sk; - - add_timer(&sk->sk_timer); + setup_timer(&sk->sk_timer, dn_slow_timer, (unsigned long)sk); + sk_reset_timer(sk, &sk->sk_timer, jiffies + SLOW_INTERVAL); } void dn_stop_slow_timer(struct sock *sk) { - del_timer(&sk->sk_timer); + sk_stop_timer(sk, &sk->sk_timer); } static void dn_slow_timer(unsigned long arg) @@ -53,12 +50,10 @@ static void dn_slow_timer(unsigned long arg) struct sock *sk = (struct sock *)arg; struct dn_scp *scp = DN_SK(sk); - sock_hold(sk); bh_lock_sock(sk); if (sock_owned_by_user(sk)) { - sk->sk_timer.expires = jiffies + HZ / 10; - add_timer(&sk->sk_timer); + sk_reset_timer(sk, &sk->sk_timer, jiffies + HZ / 10); goto out; } @@ -100,9 +95,7 @@ static void dn_slow_timer(unsigned long arg) scp->keepalive_fxn(sk); } - sk->sk_timer.expires = jiffies + SLOW_INTERVAL; - - add_timer(&sk->sk_timer); + sk_reset_timer(sk, &sk->sk_timer, jiffies + SLOW_INTERVAL); out: bh_unlock_sock(sk); sock_put(sk); From 71b1391a41289735676be02e35239e5aa9fe6ba6 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 25 Nov 2011 06:47:16 +0000 Subject: [PATCH 073/364] l2tp: ensure sk->dst is still valid When using l2tp over ipsec, the tunnel will hang when rekeying occurs. Reason is that the transformer bundle attached to the dst entry is now in STATE_DEAD and thus xfrm_output_one() drops all packets (XfrmOutStateExpired increases). Fix this by calling __sk_dst_check (which drops the stale dst if xfrm dst->check callback finds that the bundle is no longer valid). Cc: James Chapman Signed-off-by: Florian Westphal Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/l2tp/l2tp_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index cf0f308abf5e..89ff8c67943e 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1072,7 +1072,7 @@ int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len /* Get routing info from the tunnel socket */ skb_dst_drop(skb); - skb_dst_set(skb, dst_clone(__sk_dst_get(sk))); + skb_dst_set(skb, dst_clone(__sk_dst_check(sk, 0))); inet = inet_sk(sk); fl = &inet->cork.fl; From 83b98fb46ff136945f9d06a9bf6e6aae2ffc37b3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Nov 2011 07:51:56 +0000 Subject: [PATCH 074/364] dm9000: Fix check for disabled wake on LAN We're trying to check if any options are defined which isn't wha the existing code does due to confusing & and &&. Signed-off-by: Mark Brown Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 438f4580bf66..2a22f5256353 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -613,7 +613,7 @@ static int dm9000_set_wol(struct net_device *dev, struct ethtool_wolinfo *w) if (!dm->wake_state) irq_set_irq_wake(dm->irq_wake, 1); - else if (dm->wake_state & !opts) + else if (dm->wake_state && !opts) irq_set_irq_wake(dm->irq_wake, 0); } From 0884d7aa24e15e72b3c07f7da910a13bb7df3592 Mon Sep 17 00:00:00 2001 From: Alexey Moiseytsev Date: Mon, 21 Nov 2011 13:35:25 +0000 Subject: [PATCH 075/364] AF_UNIX: Fix poll blocking problem when reading from a stream socket poll() call may be blocked by concurrent reading from the same stream socket. Signed-off-by: Alexey Moiseytsev Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/unix/af_unix.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 466fbcc5cf77..b595a3d8679f 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1957,6 +1957,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, if ((UNIXCB(skb).pid != siocb->scm->pid) || (UNIXCB(skb).cred != siocb->scm->cred)) { skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); break; } } else { @@ -1974,6 +1975,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, chunk = min_t(unsigned int, skb->len, size); if (memcpy_toiovec(msg->msg_iov, skb->data, chunk)) { skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); if (copied == 0) copied = -EFAULT; break; @@ -1991,6 +1993,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, /* put the skb back if we didn't use it up.. */ if (skb->len) { skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); break; } @@ -2006,6 +2009,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock, /* put message back and return */ skb_queue_head(&sk->sk_receive_queue, skb); + sk->sk_data_ready(sk, skb->len); break; } } while (size); From de68dca1816660b0d3ac89fa59ffb410007a143f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 26 Nov 2011 12:13:44 +0000 Subject: [PATCH 076/364] inet: add a redirect generation id in inetpeer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now inetpeer is the place where we cache redirect information for ipv4 destinations, we must be able to invalidate informations when a route is added/removed on host. As inetpeer is not yet namespace aware, this patch adds a shared redirect_genid, and a per inetpeer redirect_genid. This might be changed later if inetpeer becomes ns aware. Cache information for one inerpeer is valid as long as its redirect_genid has the same value than global redirect_genid. Reported-by: Arkadiusz MiÅ›kiewicz Tested-by: Arkadiusz MiÅ›kiewicz Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/inetpeer.h | 1 + net/ipv4/route.c | 10 +++++++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h index 78c83e62218f..e9ff3fc5e688 100644 --- a/include/net/inetpeer.h +++ b/include/net/inetpeer.h @@ -35,6 +35,7 @@ struct inet_peer { u32 metrics[RTAX_MAX]; u32 rate_tokens; /* rate limiting for ICMP */ + int redirect_genid; unsigned long rate_last; unsigned long pmtu_expires; u32 pmtu_orig; diff --git a/net/ipv4/route.c b/net/ipv4/route.c index fb47c8f0cd86..5c2847247f51 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -131,6 +131,7 @@ static int ip_rt_mtu_expires __read_mostly = 10 * 60 * HZ; static int ip_rt_min_pmtu __read_mostly = 512 + 20 + 20; static int ip_rt_min_advmss __read_mostly = 256; static int rt_chain_length_max __read_mostly = 20; +static int redirect_genid; /* * Interface to generic destination cache. @@ -837,6 +838,7 @@ static void rt_cache_invalidate(struct net *net) get_random_bytes(&shuffle, sizeof(shuffle)); atomic_add(shuffle + 1U, &net->ipv4.rt_genid); + redirect_genid++; } /* @@ -1391,8 +1393,10 @@ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw, peer = rt->peer; if (peer) { - if (peer->redirect_learned.a4 != new_gw) { + if (peer->redirect_learned.a4 != new_gw || + peer->redirect_genid != redirect_genid) { peer->redirect_learned.a4 = new_gw; + peer->redirect_genid = redirect_genid; atomic_inc(&__rt_peer_genid); } check_peer_redir(&rt->dst, peer); @@ -1701,6 +1705,8 @@ static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) if (peer) { check_peer_pmtu(dst, peer); + if (peer->redirect_genid != redirect_genid) + peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && peer->redirect_learned.a4 != rt->rt_gateway) { if (check_peer_redir(dst, peer)) @@ -1857,6 +1863,8 @@ static void rt_init_metrics(struct rtable *rt, const struct flowi4 *fl4, dst_init_metrics(&rt->dst, peer->metrics, false); check_peer_pmtu(&rt->dst, peer); + if (peer->redirect_genid != redirect_genid) + peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && peer->redirect_learned.a4 != rt->rt_gateway) { rt->rt_gateway = peer->redirect_learned.a4; From 438957f8d4a84daa7fa5be6978ad5897a2e9e5e5 Mon Sep 17 00:00:00 2001 From: Bart Westgeest Date: Tue, 1 Nov 2011 15:01:28 -0400 Subject: [PATCH 077/364] staging: usbip: bugfix for deadlock Interrupts must be disabled prior to calling usb_hcd_unlink_urb_from_ep. If interrupts are not disabled, it can potentially lead to a deadlock. The deadlock is readily reproduceable on a slower (ARM based) device such as the TI Pandaboard. Signed-off-by: Bart Westgeest Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci_rx.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index 09c44abb89e8..3872b8cccdcf 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -68,6 +68,7 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, { struct usbip_device *ud = &vdev->ud; struct urb *urb; + unsigned long flags; spin_lock(&vdev->priv_lock); urb = pickup_urb_and_free_priv(vdev, pdu->base.seqnum); @@ -101,9 +102,9 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, usbip_dbg_vhci_rx("now giveback urb %p\n", urb); - spin_lock(&the_controller->lock); + spin_lock_irqsave(&the_controller->lock, flags); usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); - spin_unlock(&the_controller->lock); + spin_unlock_irqrestore(&the_controller->lock, flags); usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); @@ -141,6 +142,7 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, { struct vhci_unlink *unlink; struct urb *urb; + unsigned long flags; usbip_dump_header(pdu); @@ -170,9 +172,9 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, urb->status = pdu->u.ret_unlink.status; pr_info("urb->status %d\n", urb->status); - spin_lock(&the_controller->lock); + spin_lock_irqsave(&the_controller->lock, flags); usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); - spin_unlock(&the_controller->lock); + spin_unlock_irqrestore(&the_controller->lock, flags); usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); From f7364ba04b0961f3a1f978bbe77102606801e35f Mon Sep 17 00:00:00 2001 From: wwang Date: Mon, 31 Oct 2011 15:02:53 +0800 Subject: [PATCH 078/364] staging:rts_pstor:Complete scanning_done variable Complete scanning_done variable if rtsx-scan thread created failed. Signed-off-by: wwang Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rts_pstor/rtsx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/rts_pstor/rtsx.c b/drivers/staging/rts_pstor/rtsx.c index 480b0ed2e4de..115635f95024 100644 --- a/drivers/staging/rts_pstor/rtsx.c +++ b/drivers/staging/rts_pstor/rtsx.c @@ -1021,6 +1021,7 @@ static int __devinit rtsx_probe(struct pci_dev *pci, th = kthread_create(rtsx_scan_thread, dev, "rtsx-scan"); if (IS_ERR(th)) { printk(KERN_ERR "Unable to start the device-scanning thread\n"); + complete(&dev->scanning_done); quiesce_and_remove_host(dev); err = PTR_ERR(th); goto errout; From 8b78607fc4a26c2e26c4a614ff0bbd3380abc402 Mon Sep 17 00:00:00 2001 From: Bernd Porr Date: Tue, 8 Nov 2011 21:21:37 +0000 Subject: [PATCH 079/364] staging: comedi: usbduxsigma: Fixed wrong range for the analogue channel. It's actually +/-2.65V/2 and not +/-2.65V. Signed-off-by: Bernd Porr Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbduxsigma.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c index a8fea9a91733..6144afb8cbaa 100644 --- a/drivers/staging/comedi/drivers/usbduxsigma.c +++ b/drivers/staging/comedi/drivers/usbduxsigma.c @@ -1,4 +1,4 @@ -#define DRIVER_VERSION "v0.5" +#define DRIVER_VERSION "v0.6" #define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com" #define DRIVER_DESC "Stirling/ITL USB-DUX SIGMA -- Bernd.Porr@f2s.com" /* @@ -25,7 +25,7 @@ Driver: usbduxsigma Description: University of Stirling USB DAQ & INCITE Technology Limited Devices: [ITL] USB-DUX (usbduxsigma.o) Author: Bernd Porr -Updated: 21 Jul 2011 +Updated: 8 Nov 2011 Status: testing */ /* @@ -44,6 +44,7 @@ Status: testing * 0.3: proper vendor ID and driver name * 0.4: fixed D/A voltage range * 0.5: various bug fixes, health check at startup + * 0.6: corrected wrong input range */ /* generates loads of debug info */ @@ -175,7 +176,7 @@ Status: testing /* comedi constants */ static const struct comedi_lrange range_usbdux_ai_range = { 1, { BIP_RANGE - (2.65) + (2.65/2.0) } }; From 3ffab428f40849ed5f21bcfd7285bdef7902f9ca Mon Sep 17 00:00:00 2001 From: Bernd Porr Date: Tue, 8 Nov 2011 21:23:03 +0000 Subject: [PATCH 080/364] staging: comedi: fix oops for USB DAQ devices. This fixes kernel oops when an USB DAQ device is plugged out while it's communicating with the userspace software. Signed-off-by: Bernd Porr Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 71 +++++++++++++++++++++------- 1 file changed, 53 insertions(+), 18 deletions(-) diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 21d8c1c16cd8..156622a6f162 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1452,9 +1452,6 @@ static struct vm_operations_struct comedi_vm_ops = { static int comedi_mmap(struct file *file, struct vm_area_struct *vma) { const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; struct comedi_async *async = NULL; unsigned long start = vma->vm_start; unsigned long size; @@ -1462,6 +1459,15 @@ static int comedi_mmap(struct file *file, struct vm_area_struct *vma) int i; int retval; struct comedi_subdevice *s; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + + dev_file_info = comedi_get_device_file_info(minor); + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; mutex_lock(&dev->mutex); if (!dev->attached) { @@ -1528,11 +1534,17 @@ static unsigned int comedi_poll(struct file *file, poll_table * wait) { unsigned int mask = 0; const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; struct comedi_subdevice *read_subdev; struct comedi_subdevice *write_subdev; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; mutex_lock(&dev->mutex); if (!dev->attached) { @@ -1578,9 +1590,15 @@ static ssize_t comedi_write(struct file *file, const char __user *buf, int n, m, count = 0, retval = 0; DECLARE_WAITQUEUE(wait, current); const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; if (!dev->attached) { DPRINTK("no driver configured on comedi%i\n", dev->minor); @@ -1683,9 +1701,15 @@ static ssize_t comedi_read(struct file *file, char __user *buf, size_t nbytes, int n, m, count = 0, retval = 0; DECLARE_WAITQUEUE(wait, current); const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; if (!dev->attached) { DPRINTK("no driver configured on comedi%i\n", dev->minor); @@ -1885,11 +1909,17 @@ ok: static int comedi_close(struct inode *inode, struct file *file) { const unsigned minor = iminor(inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; struct comedi_subdevice *s = NULL; int i; + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); + + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; mutex_lock(&dev->mutex); @@ -1923,10 +1953,15 @@ static int comedi_close(struct inode *inode, struct file *file) static int comedi_fasync(int fd, struct file *file, int on) { const unsigned minor = iminor(file->f_dentry->d_inode); - struct comedi_device_file_info *dev_file_info = - comedi_get_device_file_info(minor); + struct comedi_device_file_info *dev_file_info; + struct comedi_device *dev; + dev_file_info = comedi_get_device_file_info(minor); - struct comedi_device *dev = dev_file_info->device; + if (dev_file_info == NULL) + return -ENODEV; + dev = dev_file_info->device; + if (dev == NULL) + return -ENODEV; return fasync_helper(fd, file, on, &dev->async_queue); } From df30b21cb0eed5ba8a8e0cdfeebc66ba8cde821d Mon Sep 17 00:00:00 2001 From: Federico Vaga Date: Sat, 29 Oct 2011 09:45:39 +0200 Subject: [PATCH 081/364] Staging: comedi: fix mmap_count In comedi_fops, mmap_count is decremented at comedi_vm_ops->close but it is not incremented at comedi_vm_ops->open. This may result in a negative counter. The patch introduces the open method to keep the counter consistent. The bug was triggerd by this sample code: mmap(0, ...., comedi_fd); fork(); exit(0); Acked-by: Alessandro Rubini Signed-off-by: Federico Vaga Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 156622a6f162..88caa7376999 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1432,7 +1432,21 @@ static int do_cancel(struct comedi_device *dev, struct comedi_subdevice *s) return ret; } -static void comedi_unmap(struct vm_area_struct *area) + +static void comedi_vm_open(struct vm_area_struct *area) +{ + struct comedi_async *async; + struct comedi_device *dev; + + async = area->vm_private_data; + dev = async->subdevice->device; + + mutex_lock(&dev->mutex); + async->mmap_count++; + mutex_unlock(&dev->mutex); +} + +static void comedi_vm_close(struct vm_area_struct *area) { struct comedi_async *async; struct comedi_device *dev; @@ -1446,7 +1460,8 @@ static void comedi_unmap(struct vm_area_struct *area) } static struct vm_operations_struct comedi_vm_ops = { - .close = comedi_unmap, + .open = comedi_vm_open, + .close = comedi_vm_close, }; static int comedi_mmap(struct file *file, struct vm_area_struct *vma) From 6a9ce6b654e491981f6ef7e214cbd4f63e033848 Mon Sep 17 00:00:00 2001 From: Federico Vaga Date: Sat, 29 Oct 2011 09:47:39 +0200 Subject: [PATCH 082/364] Staging: comedi: fix signal handling in read and write After sleeping on a wait queue, signal_pending(current) should be checked (not before sleeping). Acked-by: Alessandro Rubini Signed-off-by: Federico Vaga Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 88caa7376999..ebdcecda3583 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -1673,11 +1673,11 @@ static ssize_t comedi_write(struct file *file, const char __user *buf, retval = -EAGAIN; break; } + schedule(); if (signal_pending(current)) { retval = -ERESTARTSYS; break; } - schedule(); if (!s->busy) break; if (s->busy != file) { @@ -1780,11 +1780,11 @@ static ssize_t comedi_read(struct file *file, char __user *buf, size_t nbytes, retval = -EAGAIN; break; } + schedule(); if (signal_pending(current)) { retval = -ERESTARTSYS; break; } - schedule(); if (!s->busy) { retval = 0; break; From e384a41141949843899affcf51f4e6e646c1fe9f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 4 Nov 2011 21:20:43 +0300 Subject: [PATCH 083/364] Staging: comedi: integer overflow in do_insnlist_ioctl() There is an integer overflow here that could cause memory corruption on 32 bit systems. insnlist.n_insns could be a very high value size calculation for kmalloc() could overflow resulting in a smaller "insns" than expected. In the for (i = 0; i < insnlist.n_insns; i++) {... loop we would read past the end of the buffer, possibly corrupting memory as well. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index ebdcecda3583..ed4853f194c4 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -670,6 +670,11 @@ static int do_insnlist_ioctl(struct comedi_device *dev, goto error; } + if (sizeof(struct comedi_insn) * insnlist.n_insns < insnlist.n_insns) { + ret = -EINVAL; + goto error; + } + insns = kmalloc(sizeof(struct comedi_insn) * insnlist.n_insns, GFP_KERNEL); if (!insns) { From 46b1848360c8e634e0b063932a1261062fa0f7d6 Mon Sep 17 00:00:00 2001 From: Dirk Nehring Date: Thu, 24 Nov 2011 19:22:23 +0100 Subject: [PATCH 084/364] usb: option: add Huawei E353 controlling interfaces This patch creates the missing controlling devices for the Huawei E353 HSPA+ stick. Signed-off-by: Dirk Nehring Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d865878c9f97..6e09857c32eb 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -661,6 +661,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x31) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4511, 0xff, 0x01, 0x32) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x08) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, From ec0cd94d881ca89cc9fb61d00d0f4b2b52e605b3 Mon Sep 17 00:00:00 2001 From: Veli-Pekka Peltola Date: Thu, 24 Nov 2011 22:08:56 +0200 Subject: [PATCH 085/364] usb: option: add SIMCom SIM5218 Tested with SIM5218EVB-KIT evaluation kit. Signed-off-by: Veli-Pekka Peltola Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6e09857c32eb..e3426602dc82 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -750,6 +750,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, From cec28a5428793b6bc64e56687fb239759d6da74e Mon Sep 17 00:00:00 2001 From: Qinglin Ye Date: Wed, 23 Nov 2011 23:39:32 +0800 Subject: [PATCH 086/364] USB: usb-storage: unusual_devs entry for Kingston DT 101 G2 Kingston DT 101 G2 replies a wrong tag while transporting, add an unusal_devs entry to ignore the tag validation. Signed-off-by: Qinglin Ye Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 3041a974faf3..24caba79d722 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1854,6 +1854,13 @@ UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Qinglin Ye */ +UNUSUAL_DEV( 0x13fe, 0x3600, 0x0100, 0x0100, + "Kingston", + "DT 101 G2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK_IGNORE_TAG ), + /* Reported by Francesco Foresti */ UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, "Super Top", From 8746c83d538cab273d335acb2be226d096f4a5af Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 22 Nov 2011 10:28:31 +0300 Subject: [PATCH 087/364] USB: whci-hcd: fix endian conversion in qset_clear() qset->qh.link is an __le64 field and we should be using cpu_to_le64() to fill it. Signed-off-by: Dan Carpenter Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/whci/qset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index d6e175428618..a403b53e86b9 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -124,7 +124,7 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) { qset->td_start = qset->td_end = qset->ntds = 0; - qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T); + qset->qh.link = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK; qset->qh.err_count = 0; qset->qh.scratch[0] = 0; From 5b895eec118ab5fec7b69102d73c1b04a86140b9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 27 Nov 2011 15:54:49 +0000 Subject: [PATCH 088/364] ASoC: Correct name of Speyside Main Speaker widget Signed-off-by: Mark Brown --- sound/soc/samsung/speyside.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c index 85bf541a771d..4b8e35410eb1 100644 --- a/sound/soc/samsung/speyside.c +++ b/sound/soc/samsung/speyside.c @@ -191,7 +191,7 @@ static int speyside_late_probe(struct snd_soc_card *card) snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic"); snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC"); snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC"); - snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker"); + snd_soc_dapm_ignore_suspend(&card->dapm, "Main Speaker"); snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output"); snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input"); From 06b446c8af5db5a98b2eaa30b513c79089ed254b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 28 Nov 2011 04:34:34 +0900 Subject: [PATCH 089/364] Revert "Staging: comedi: integer overflow in do_insnlist_ioctl()" This reverts commit e384a41141949843899affcf51f4e6e646c1fe9f. It's not the correct way to solve this issue. Acked-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index ed4853f194c4..ebdcecda3583 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -670,11 +670,6 @@ static int do_insnlist_ioctl(struct comedi_device *dev, goto error; } - if (sizeof(struct comedi_insn) * insnlist.n_insns < insnlist.n_insns) { - ret = -EINVAL; - goto error; - } - insns = kmalloc(sizeof(struct comedi_insn) * insnlist.n_insns, GFP_KERNEL); if (!insns) { From dfd8ee92a9192d78aa38cf8699df3630a7c88c85 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Fri, 25 Nov 2011 16:46:51 -0500 Subject: [PATCH 090/364] Staging: comedi: fix integer overflow in do_insnlist_ioctl() There is a potential integer overflow in do_insnlist_ioctl() if userspace passes in a large insnlist.n_insns. The call to kmalloc() would allocate a small buffer, leading to a memory corruption. The bug was reported by Dan Carpenter and Haogang Chen . The patch was suggested by Ian Abbott and Lars-Peter Clausen . Reported-by: Dan Carpenter Reported-by: Haogang Chen . Cc: Ian Abbott Cc: Lars-Peter Clausen Signed-off-by: Xi Wang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/comedi_fops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index ebdcecda3583..5e78c77d5a08 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -671,7 +671,7 @@ static int do_insnlist_ioctl(struct comedi_device *dev, } insns = - kmalloc(sizeof(struct comedi_insn) * insnlist.n_insns, GFP_KERNEL); + kcalloc(insnlist.n_insns, sizeof(struct comedi_insn), GFP_KERNEL); if (!insns) { DPRINTK("kmalloc failed\n"); ret = -ENOMEM; From c4860ba2e11261a541632ceee8267ca490d9eb98 Mon Sep 17 00:00:00 2001 From: Aries Lee Date: Mon, 21 Nov 2011 10:20:42 +0000 Subject: [PATCH 091/364] jme: PHY configuration for compatible issue To perform PHY calibration and set a different EA value by chip ID, Whenever the NIC chip power on, ie booting or resuming, we need to force HW to calibrate PHY parameter again, and also set a proper EA value which gather from experiment. Those procedures help to reduce compatible issues(NIC is unable to link up in some special case) in giga speed. Signed-off-by: AriesLee Signed-off-by: Guo-Fu Tseng Signed-off-by: David S. Miller --- drivers/net/ethernet/jme.c | 113 ++++++++++++++++++++++++++++++++++++- drivers/net/ethernet/jme.h | 19 +++++++ 2 files changed, 129 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 7becff1f387d..76b84573566b 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -1744,6 +1744,112 @@ jme_phy_off(struct jme_adapter *jme) jme_new_phy_off(jme); } +static int +jme_phy_specreg_read(struct jme_adapter *jme, u32 specreg) +{ + u32 phy_addr; + + phy_addr = JM_PHY_SPEC_REG_READ | specreg; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG, + phy_addr); + return jme_mdio_read(jme->dev, jme->mii_if.phy_id, + JM_PHY_SPEC_DATA_REG); +} + +static void +jme_phy_specreg_write(struct jme_adapter *jme, u32 ext_reg, u32 phy_data) +{ + u32 phy_addr; + + phy_addr = JM_PHY_SPEC_REG_WRITE | ext_reg; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_DATA_REG, + phy_data); + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG, + phy_addr); +} + +static int +jme_phy_calibration(struct jme_adapter *jme) +{ + u32 ctrl1000, phy_data; + + jme_phy_off(jme); + jme_phy_on(jme); + /* Enabel PHY test mode 1 */ + ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000); + ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK; + ctrl1000 |= PHY_GAD_TEST_MODE_1; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000); + + phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG); + phy_data &= ~JM_PHY_EXT_COMM_2_CALI_MODE_0; + phy_data |= JM_PHY_EXT_COMM_2_CALI_LATCH | + JM_PHY_EXT_COMM_2_CALI_ENABLE; + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data); + msleep(20); + phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG); + phy_data &= ~(JM_PHY_EXT_COMM_2_CALI_ENABLE | + JM_PHY_EXT_COMM_2_CALI_MODE_0 | + JM_PHY_EXT_COMM_2_CALI_LATCH); + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data); + + /* Disable PHY test mode */ + ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000); + ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000); + return 0; +} + +static int +jme_phy_setEA(struct jme_adapter *jme) +{ + u32 phy_comm0 = 0, phy_comm1 = 0; + u8 nic_ctrl; + + pci_read_config_byte(jme->pdev, PCI_PRIV_SHARE_NICCTRL, &nic_ctrl); + if ((nic_ctrl & 0x3) == JME_FLAG_PHYEA_ENABLE) + return 0; + + switch (jme->pdev->device) { + case PCI_DEVICE_ID_JMICRON_JMC250: + if (((jme->chip_main_rev == 5) && + ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) || + (jme->chip_sub_rev == 3))) || + (jme->chip_main_rev >= 6)) { + phy_comm0 = 0x008A; + phy_comm1 = 0x4109; + } + if ((jme->chip_main_rev == 3) && + ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2))) + phy_comm0 = 0xE088; + break; + case PCI_DEVICE_ID_JMICRON_JMC260: + if (((jme->chip_main_rev == 5) && + ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) || + (jme->chip_sub_rev == 3))) || + (jme->chip_main_rev >= 6)) { + phy_comm0 = 0x008A; + phy_comm1 = 0x4109; + } + if ((jme->chip_main_rev == 3) && + ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2))) + phy_comm0 = 0xE088; + if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 0)) + phy_comm0 = 0x608A; + if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 2)) + phy_comm0 = 0x408A; + break; + default: + return -ENODEV; + } + if (phy_comm0) + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_0_REG, phy_comm0); + if (phy_comm1) + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_1_REG, phy_comm1); + + return 0; +} + static int jme_open(struct net_device *netdev) { @@ -1769,7 +1875,8 @@ jme_open(struct net_device *netdev) jme_set_settings(netdev, &jme->old_ecmd); else jme_reset_phy_processor(jme); - + jme_phy_calibration(jme); + jme_phy_setEA(jme); jme_reset_link(jme); return 0; @@ -3184,7 +3291,8 @@ jme_resume(struct device *dev) jme_set_settings(netdev, &jme->old_ecmd); else jme_reset_phy_processor(jme); - + jme_phy_calibration(jme); + jme_phy_setEA(jme); jme_start_irq(jme); netif_device_attach(netdev); @@ -3239,4 +3347,3 @@ MODULE_DESCRIPTION("JMicron JMC2x0 PCI Express Ethernet driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, jme_pci_tbl); - diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h index 02ea27c1dcb5..4304072bd3c5 100644 --- a/drivers/net/ethernet/jme.h +++ b/drivers/net/ethernet/jme.h @@ -760,6 +760,25 @@ enum jme_rxmcs_bits { RXMCS_CHECKSUM, }; +/* Extern PHY common register 2 */ + +#define PHY_GAD_TEST_MODE_1 0x00002000 +#define PHY_GAD_TEST_MODE_MSK 0x0000E000 +#define JM_PHY_SPEC_REG_READ 0x00004000 +#define JM_PHY_SPEC_REG_WRITE 0x00008000 +#define PHY_CALIBRATION_DELAY 20 +#define JM_PHY_SPEC_ADDR_REG 0x1E +#define JM_PHY_SPEC_DATA_REG 0x1F + +#define JM_PHY_EXT_COMM_0_REG 0x30 +#define JM_PHY_EXT_COMM_1_REG 0x31 +#define JM_PHY_EXT_COMM_2_REG 0x32 +#define JM_PHY_EXT_COMM_2_CALI_ENABLE 0x01 +#define JM_PHY_EXT_COMM_2_CALI_MODE_0 0x02 +#define JM_PHY_EXT_COMM_2_CALI_LATCH 0x10 +#define PCI_PRIV_SHARE_NICCTRL 0xF5 +#define JME_FLAG_PHYEA_ENABLE 0x2 + /* * Wakeup Frame setup interface registers */ From a5f70b6717a229ad10aa79382a29a8ee6f1976c3 Mon Sep 17 00:00:00 2001 From: Christian Hitz Date: Mon, 24 Oct 2011 08:57:32 +0200 Subject: [PATCH 092/364] ARM: at91: fix NAND bus width decoding from system_rev Make it is safe to assign the return value of this function to u8/u16 variables. Signed-off-by: Christian Hitz Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/include/mach/system_rev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index 8f4866045b41..ec164a4124c9 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -19,7 +19,7 @@ #define BOARD_HAVE_NAND_16BIT (1 << 31) static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_16BIT; + return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0; } #endif /* __ARCH_SYSTEM_REV_H__ */ From df711fc9962b9491af2b92bd0d21ecbfefe4e5fa Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Thu, 17 Nov 2011 13:07:44 +0800 Subject: [PATCH 093/364] xHCI: reset-on-resume quirk for NEC uPD720200 Julian Sikorski reports NEC uPD720200 does not work stable after suspend and resume. Re-initialize the host in xhci_resume(). This should be backported to stable kernels as old as 2.6.37. The kernel will need to include commit c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9 "xhci: Add reset on resume quirk for asrock p67 host" for this patch to work. Signed-off-by: Andiry Xu Reported-by: Julian Sikorski Tested-by: Julian Sikorski Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-pci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ef98b38626fb..d2a7332daca4 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -33,6 +33,8 @@ #define PCI_VENDOR_ID_ETRON 0x1b6f #define PCI_DEVICE_ID_ASROCK_P67 0x7023 +#define PCI_DEVICE_ID_NEC_uPD720200 0x0194 + static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -74,8 +76,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->revision); } - if (pdev->vendor == PCI_VENDOR_ID_NEC) + if (pdev->vendor == PCI_VENDOR_ID_NEC) { xhci->quirks |= XHCI_NEC_HOST; + if (pdev->device == PCI_DEVICE_ID_NEC_uPD720200) + xhci->quirks |= XHCI_RESET_ON_RESUME; + } if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; From e007b857e88097c96c45620bf3b04a4e309053d1 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 24 Nov 2011 18:13:56 +0200 Subject: [PATCH 094/364] nl80211: fix MAC address validation MAC addresses have a fixed length. The current policy allows passing < ETH_ALEN bytes, which might result in reading beyond the buffer. Cc: stable@vger.kernel.org Signed-off-by: Eliad Peller Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b3a476fe8272..ffafda5022c2 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -89,8 +89,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_IFINDEX] = { .type = NLA_U32 }, [NL80211_ATTR_IFNAME] = { .type = NLA_NUL_STRING, .len = IFNAMSIZ-1 }, - [NL80211_ATTR_MAC] = { .type = NLA_BINARY, .len = ETH_ALEN }, - [NL80211_ATTR_PREV_BSSID] = { .type = NLA_BINARY, .len = ETH_ALEN }, + [NL80211_ATTR_MAC] = { .len = ETH_ALEN }, + [NL80211_ATTR_PREV_BSSID] = { .len = ETH_ALEN }, [NL80211_ATTR_KEY] = { .type = NLA_NESTED, }, [NL80211_ATTR_KEY_DATA] = { .type = NLA_BINARY, From 24f50a9d165745fd0701c6e089d35f58a229ea69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Nov 2011 20:06:14 +0100 Subject: [PATCH 095/364] mac80211: don't stop a single aggregation session twice Nikolay noticed (by code review) that mac80211 can attempt to stop an aggregation session while it is already being stopped. So to fix it, check whether stop is already being done and bail out if so. Also move setting the STOPPING state into the lock so things are properly atomic. Cc: stable@vger.kernel.org Reported-by: Nikolay Martynov Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/agg-tx.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 2ac033989e01..674b345ade81 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -160,6 +160,12 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, return -ENOENT; } + /* if we're already stopping ignore any new requests to stop */ + if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { + spin_unlock_bh(&sta->lock); + return -EALREADY; + } + if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { /* not even started yet! */ ieee80211_assign_tid_tx(sta, tid, NULL); @@ -168,6 +174,8 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, return 0; } + set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state); + spin_unlock_bh(&sta->lock); #ifdef CONFIG_MAC80211_HT_DEBUG @@ -175,8 +183,6 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, sta->sta.addr, tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ - set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state); - del_timer_sync(&tid_tx->addba_resp_timer); /* From e55b32c110b025ce07b40227f620e99700bf8741 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 28 Nov 2011 10:33:40 +0100 Subject: [PATCH 096/364] rtlwifi: fix lps_lock deadlock rtl_lps_leave can be called from interrupt context, so we have to disable interrupts when taking lps_lock. Below is full lockdep info about deadlock: [ 93.815269] ================================= [ 93.815390] [ INFO: inconsistent lock state ] [ 93.815472] 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815556] --------------------------------- [ 93.815635] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 93.815743] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 93.815832] (&(&rtlpriv->locks.lps_lock)->rlock){+.?...}, at: [] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.815947] {SOFTIRQ-ON-W} state was registered at: [ 93.815947] [] __lock_acquire+0x369/0xd0c [ 93.815947] [] lock_acquire+0xf3/0x13e [ 93.815947] [] _raw_spin_lock+0x45/0x79 [ 93.815947] [] rtl_swlps_rf_awake+0x5a/0x76 [rtlwifi] [ 93.815947] [] rtl_op_config+0x12a/0x32a [rtlwifi] [ 93.815947] [] ieee80211_hw_config+0x124/0x129 [mac80211] [ 93.815947] [] ieee80211_dynamic_ps_disable_work+0x32/0x47 [mac80211] [ 93.815947] [] process_one_work+0x205/0x3e7 [ 93.815947] [] worker_thread+0xda/0x15d [ 93.815947] [] kthread+0xa8/0xb0 [ 93.815947] [] kernel_thread_helper+0x4/0x10 [ 93.815947] irq event stamp: 547822 [ 93.815947] hardirqs last enabled at (547822): [] _raw_spin_unlock_irqrestore+0x45/0x61 [ 93.815947] hardirqs last disabled at (547821): [] _raw_spin_lock_irqsave+0x22/0x8e [ 93.815947] softirqs last enabled at (547790): [] _local_bh_enable+0x13/0x15 [ 93.815947] softirqs last disabled at (547791): [] call_softirq+0x1c/0x30 [ 93.815947] [ 93.815947] other info that might help us debug this: [ 93.815947] Possible unsafe locking scenario: [ 93.815947] [ 93.815947] CPU0 [ 93.815947] ---- [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] [ 93.815947] lock(&(&rtlpriv->locks.lps_lock)->rlock); [ 93.815947] [ 93.815947] *** DEADLOCK *** [ 93.815947] [ 93.815947] no locks held by swapper/0. [ 93.815947] [ 93.815947] stack backtrace: [ 93.815947] Pid: 0, comm: swapper Not tainted 2.6.41.1-3.offch.fc15.x86_64.debug #1 [ 93.815947] Call Trace: [ 93.815947] [] print_usage_bug+0x1e7/0x1f8 [ 93.815947] [] ? save_stack_trace+0x2c/0x49 [ 93.815947] [] ? print_irq_inversion_bug.part.18+0x1a0/0x1a0 [ 93.815947] [] mark_lock+0x106/0x220 [ 93.815947] [] __lock_acquire+0x2f5/0xd0c [ 93.815947] [] ? native_sched_clock+0x34/0x36 [ 93.830125] [] ? sched_clock+0x9/0xd [ 93.830125] [] ? sched_clock_local+0x12/0x75 [ 93.830125] [] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] lock_acquire+0xf3/0x13e [ 93.830125] [] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] _raw_spin_lock+0x45/0x79 [ 93.830125] [] ? rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] ? skb_dequeue+0x62/0x6d [ 93.830125] [] rtl_lps_leave+0x26/0x103 [rtlwifi] [ 93.830125] [] _rtl_pci_ips_leave_tasklet+0xe/0x10 [rtlwifi] [ 93.830125] [] tasklet_action+0x8d/0xee [ 93.830125] [] __do_softirq+0x112/0x25a [ 93.830125] [] call_softirq+0x1c/0x30 [ 93.830125] [] do_softirq+0x4b/0xa1 [ 93.830125] [] irq_exit+0x5d/0xcf [ 93.830125] [] do_IRQ+0x8e/0xa5 [ 93.830125] [] common_interrupt+0x73/0x73 [ 93.830125] [] ? trace_hardirqs_off+0xd/0xf [ 93.830125] [] ? intel_idle+0xe5/0x10c [ 93.830125] [] ? intel_idle+0xe1/0x10c [ 93.830125] [] cpuidle_idle_call+0x11c/0x1fe [ 93.830125] [] cpu_idle+0xab/0x101 [ 93.830125] [] rest_init+0xd7/0xde [ 93.830125] [] ? csum_partial_copy_generic+0x16c/0x16c [ 93.830125] [] start_kernel+0x3dd/0x3ea [ 93.830125] [] x86_64_start_reservations+0xaf/0xb3 [ 93.830125] [] ? early_idt_handlers+0x140/0x140 [ 93.830125] [] x86_64_start_kernel+0x102/0x111 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=755154 Reported-by: vjain02@students.poly.edu Reported-and-tested-by: Oliver Paukstadt Cc: stable@vger.kernel.org Acked-by: Larry Finger Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/ps.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c index a693feffbe72..0b04b2e7b597 100644 --- a/drivers/net/wireless/rtlwifi/ps.c +++ b/drivers/net/wireless/rtlwifi/ps.c @@ -394,7 +394,7 @@ void rtl_lps_enter(struct ieee80211_hw *hw) if (mac->link_state != MAC80211_LINKED) return; - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irq(&rtlpriv->locks.lps_lock); /* Idle for a while if we connect to AP a while ago. */ if (mac->cnt_after_linked >= 2) { @@ -406,7 +406,7 @@ void rtl_lps_enter(struct ieee80211_hw *hw) } } - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irq(&rtlpriv->locks.lps_lock); } /*Leave the leisure power save mode.*/ @@ -415,8 +415,9 @@ void rtl_lps_leave(struct ieee80211_hw *hw) struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + unsigned long flags; - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irqsave(&rtlpriv->locks.lps_lock, flags); if (ppsc->fwctrl_lps) { if (ppsc->dot11_psmode != EACTIVE) { @@ -437,7 +438,7 @@ void rtl_lps_leave(struct ieee80211_hw *hw) rtl_lps_set_psmode(hw, EACTIVE); } } - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flags); } /* For sw LPS*/ @@ -538,9 +539,9 @@ void rtl_swlps_rf_awake(struct ieee80211_hw *hw) RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM); } - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irq(&rtlpriv->locks.lps_lock); rtl_ps_set_rf_state(hw, ERFON, RF_CHANGE_BY_PS); - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irq(&rtlpriv->locks.lps_lock); } void rtl_swlps_rfon_wq_callback(void *data) @@ -573,9 +574,9 @@ void rtl_swlps_rf_sleep(struct ieee80211_hw *hw) if (rtlpriv->link_info.busytraffic) return; - spin_lock(&rtlpriv->locks.lps_lock); + spin_lock_irq(&rtlpriv->locks.lps_lock); rtl_ps_set_rf_state(hw, ERFSLEEP, RF_CHANGE_BY_PS); - spin_unlock(&rtlpriv->locks.lps_lock); + spin_unlock_irq(&rtlpriv->locks.lps_lock); if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM && !RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) { From a73228124bed4022d4d4c5663d9679ba2fb99c6c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 26 Nov 2011 23:37:43 +0100 Subject: [PATCH 097/364] ath9k: Revert change that broke AR928X on Acer Ferrari One Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by commit 2577c6e8f2320f1d2f09be122efef5b9118efee4 (ath9k_hw: Add support for AR946/8x chipsets) that caused a nasty regression to appear on my Acer Ferrari One (the box locks up entirely at random times after the wireless has been started without any way to get debug information out of it). Signed-off-by: Rafael J. Wysocki Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index b479160dc262..7a9c6f7cd7e1 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1826,7 +1826,8 @@ static void ath9k_set_power_sleep(struct ath_hw *ah, int setChip) } /* Clear Bit 14 of AR_WA after putting chip into Full Sleep mode. */ - REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE); + if (AR_SREV_9300_20_OR_LATER(ah)) + REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE); } /* From d305a6557b2c4dca0110f05ffe745b1ef94adb80 Mon Sep 17 00:00:00 2001 From: Nikolay Martynov Date: Mon, 28 Nov 2011 09:18:00 +0100 Subject: [PATCH 098/364] mac80211: fix race condition caused by late addBA response If addBA responses comes in just after addba_resp_timer has expired mac80211 will still accept it and try to open the aggregation session. This causes drivers to be confused and in some cases even crash. This patch fixes the race condition and makes sure that if addba_resp_timer has expired addBA response is not longer accepted and we do not try to open half-closed session. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov [some adjustments] Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/agg-tx.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 674b345ade81..eea6e5c8d168 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -762,11 +762,27 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, goto out; } - del_timer(&tid_tx->addba_resp_timer); + del_timer_sync(&tid_tx->addba_resp_timer); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "switched off addBA timer for tid %d\n", tid); #endif + + /* + * addba_resp_timer may have fired before we got here, and + * caused WANT_STOP to be set. If the stop then was already + * processed further, STOPPING might be set. + */ + if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) || + test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG + "got addBA resp for tid %d but we already gave up\n", + tid); +#endif + goto out; + } + /* * IEEE 802.11-2007 7.3.1.14: * In an ADDBA Response frame, when the Status Code field From 2a1e0fd175dcfd72096ba9291d31e3b1b5342e60 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 27 Nov 2011 15:29:44 +0200 Subject: [PATCH 099/364] mac80211: fix race between the AGG SM and the Tx data path When a packet is supposed to sent be as an a-MPDU, mac80211 sets IEEE80211_TX_CTL_AMPDU to let the driver know. On the other hand, mac80211 configures the driver for aggregration with the ampdu_action callback. There is race between these two mechanisms since the following scenario can occur when the BA agreement is torn down: Tx softIRQ drv configuration ========== ================= check OPERATIONAL bit Set the TX_CTL_AMPDU bit in the packet clear OPERATIONAL bit stop Tx AGG Pass Tx packet to the driver. In that case the driver would get a packet with TX_CTL_AMPDU set although it has already been notified that the BA session has been torn down. To fix this, we need to synchronize all the Qdisc activity after we cleared the OPERATIONAL bit. After that step, all the following packets will be buffered until the driver reports it is ready to get new packets for this RA / TID. This buffering allows not to run into another race that would send packets with TX_CTL_AMPDU unset while the driver hasn't been requested to tear down the BA session yet. This race occurs in practice and iwlwifi complains with a WARN_ON when it happens. Cc: stable@kernel.org Signed-off-by: Emmanuel Grumbach Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/agg-tx.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index eea6e5c8d168..331472ce038c 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -192,6 +192,20 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, */ clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state); + /* + * There might be a few packets being processed right now (on + * another CPU) that have already gotten past the aggregation + * check when it was still OPERATIONAL and consequently have + * IEEE80211_TX_CTL_AMPDU set. In that case, this code might + * call into the driver at the same time or even before the + * TX paths calls into it, which could confuse the driver. + * + * Wait for all currently running TX paths to finish before + * telling the driver. New packets will not go through since + * the aggregation session is no longer OPERATIONAL. + */ + synchronize_net(); + tid_tx->stop_initiator = initiator; tid_tx->tx_stop = tx; From fc07ecd851bd082265b52838eff12f50b88f6114 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 28 Nov 2011 21:16:56 +0000 Subject: [PATCH 100/364] ASoC: Error out if we can't generate a LRCLK at all for WM8994 Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 9c982e47eb99..36ba1edfff80 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -2357,6 +2357,11 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream, bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT; lrclk = bclk_rate / params_rate(params); + if (!lrclk) { + dev_err(dai->dev, "Unable to generate LRCLK from %dHz BCLK\n", + bclk_rate); + return -EINVAL; + } dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n", lrclk, bclk_rate / lrclk); From 5cac98dd06bc43a7baab3523184f70fd359e9f35 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 27 Nov 2011 21:14:46 +0000 Subject: [PATCH 101/364] net: Fix corruption in /proc/*/net/dev_mcast I just hit this during my testing. Isn't there another bug lurking? BUG kmalloc-8: Redzone overwritten INFO: 0xc0000000de9dec48-0xc0000000de9dec4b. First byte 0x0 instead of 0xcc INFO: Allocated in .__seq_open_private+0x30/0xa0 age=0 cpu=5 pid=3896 .__kmalloc+0x1e0/0x2d0 .__seq_open_private+0x30/0xa0 .seq_open_net+0x60/0xe0 .dev_mc_seq_open+0x4c/0x70 .proc_reg_open+0xd8/0x260 .__dentry_open.clone.11+0x2b8/0x400 .do_last+0xf4/0x950 .path_openat+0xf8/0x480 .do_filp_open+0x48/0xc0 .do_sys_open+0x140/0x250 syscall_exit+0x0/0x40 dev_mc_seq_ops uses dev_seq_start/next/stop but only allocates sizeof(struct seq_net_private) of private data, whereas it expects sizeof(struct dev_iter_state): struct dev_iter_state { struct seq_net_private p; unsigned int pos; /* bucket << BUCKET_SPACE + offset */ }; Create dev_seq_open_ops and use it so we don't have to expose struct dev_iter_state. [ Problem added by commit f04565ddf52e4 (dev: use name hash for dev_seq_ops) -Eric ] Signed-off-by: Anton Blanchard Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 ++ net/core/dev.c | 6 ++++++ net/core/dev_addr_lists.c | 3 +-- 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index cbeb5867cff7..a82ad4dd306a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2536,6 +2536,8 @@ extern void net_disable_timestamp(void); extern void *dev_seq_start(struct seq_file *seq, loff_t *pos); extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos); extern void dev_seq_stop(struct seq_file *seq, void *v); +extern int dev_seq_open_ops(struct inode *inode, struct file *file, + const struct seq_operations *ops); #endif extern int netdev_class_create_file(struct class_attribute *class_attr); diff --git a/net/core/dev.c b/net/core/dev.c index 6ba50a1e404c..1482eea0bbf0 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4282,6 +4282,12 @@ static int dev_seq_open(struct inode *inode, struct file *file) sizeof(struct dev_iter_state)); } +int dev_seq_open_ops(struct inode *inode, struct file *file, + const struct seq_operations *ops) +{ + return seq_open_net(inode, file, ops, sizeof(struct dev_iter_state)); +} + static const struct file_operations dev_seq_fops = { .owner = THIS_MODULE, .open = dev_seq_open, diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 277faef9148d..febba516db62 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -696,8 +696,7 @@ static const struct seq_operations dev_mc_seq_ops = { static int dev_mc_seq_open(struct inode *inode, struct file *file) { - return seq_open_net(inode, file, &dev_mc_seq_ops, - sizeof(struct seq_net_private)); + return dev_seq_open_ops(inode, file, &dev_mc_seq_ops); } static const struct file_operations dev_mc_seq_fops = { From 2a38e6d5aed24bb7f0211e0819fac8c32c2b5791 Mon Sep 17 00:00:00 2001 From: Li Wei Date: Sun, 27 Nov 2011 21:33:34 +0000 Subject: [PATCH 102/364] ipv6: Set mcast_hops to IPV6_DEFAULT_MCASTHOPS when -1 was given. We need to set np->mcast_hops to it's default value at this moment otherwise when we use it and found it's value is -1, the logic to get default hop limit doesn't take multicast into account and will return wrong hop limit(IPV6_DEFAULT_HOPLIMIT) which is for unicast. Signed-off-by: Li Wei Signed-off-by: David S. Miller --- net/ipv6/ipv6_sockglue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index c99e3ee9781f..26cb08c84b74 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -503,7 +503,7 @@ done: goto e_inval; if (val > 255 || val < -1) goto e_inval; - np->mcast_hops = val; + np->mcast_hops = (val == -1 ? IPV6_DEFAULT_MCASTHOPS : val); retv = 0; break; From fc8e6e8668e74fbf8e00d6e143d7f43b20f73f32 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 28 Nov 2011 18:48:46 +0000 Subject: [PATCH 103/364] ASoC: Supply dcs_codes for newer WM1811 revisions Based on initial data. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 36ba1edfff80..6c2988549003 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3183,6 +3183,8 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) switch (wm8994->revision) { case 0: case 1: + case 2: + case 3: wm8994->hubs.dcs_codes_l = -9; wm8994->hubs.dcs_codes_r = -5; break; From e3420901eba65b1c46bed86d360e3a8685d20734 Mon Sep 17 00:00:00 2001 From: Matthieu CASTET Date: Mon, 28 Nov 2011 11:30:22 +0100 Subject: [PATCH 104/364] EHCI : Fix a regression in the ISO scheduler Fix a regression that was introduced by commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 (USB: EHCI: fix HUB TT scheduling issue with iso transfer). We detect an error if next == start, but this means uframe 0 can't be allocated anymore for iso transfer... Reported-by: Sander Eikelenboom Signed-off-by: Matthieu CASTET Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 56a32033adb3..a60679cbbf85 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1475,6 +1475,7 @@ iso_stream_schedule ( * jump until after the queue is primed. */ else { + int done = 0; start = SCHEDULE_SLOP + (now & ~0x07); /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ @@ -1492,18 +1493,18 @@ iso_stream_schedule ( if (stream->highspeed) { if (itd_slot_ok(ehci, mod, start, stream->usecs, period)) - break; + done = 1; } else { if ((start % 8) >= 6) continue; if (sitd_slot_ok(ehci, mod, stream, start, sched, period)) - break; + done = 1; } - } while (start > next); + } while (start > next && !done); /* no room in the schedule */ - if (start == next) { + if (!done) { ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n", urb, now, now + mod); status = -ENOSPC; From 118205d6b6752e22e19b771771174e6426582311 Mon Sep 17 00:00:00 2001 From: Klaus Schwarzkopf Date: Mon, 28 Nov 2011 13:03:25 +0100 Subject: [PATCH 105/364] USB: linux-cdc-acm.inf: add support for the acm_ms gadget Support for the acm_ms usb gadget on windows. Signed-off-by: Klaus Schwarzkopf Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/linux-cdc-acm.inf | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/usb/linux-cdc-acm.inf b/Documentation/usb/linux-cdc-acm.inf index 37a02ce54841..f0ffc27d4c0a 100644 --- a/Documentation/usb/linux-cdc-acm.inf +++ b/Documentation/usb/linux-cdc-acm.inf @@ -90,10 +90,10 @@ ServiceBinary=%12%\USBSER.sys [SourceDisksFiles] [SourceDisksNames] [DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02 +%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00 [DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02 +%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00 ;------------------------------------------------------------------------------ From fa8b18edd752a8b4e9d1ee2cd615b82c93cf8bba Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 20 Nov 2011 15:35:32 +0000 Subject: [PATCH 106/364] xfs: validate acl count This prevents in-memory corruption and possible panics if the on-disk ACL is badly corrupted. Signed-off-by: Christoph Hellwig Signed-off-by: Ben Myers --- fs/xfs/xfs_acl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c index b6c4b3795c4a..76e4266d2e7e 100644 --- a/fs/xfs/xfs_acl.c +++ b/fs/xfs/xfs_acl.c @@ -42,6 +42,8 @@ xfs_acl_from_disk(struct xfs_acl *aclp) int count, i; count = be32_to_cpu(aclp->acl_cnt); + if (count > XFS_ACL_MAX_ENTRIES) + return ERR_PTR(-EFSCORRUPTED); acl = posix_acl_alloc(count, GFP_KERNEL); if (!acl) From a5e5c37434eb182cf50cec90d9736d9a9a390116 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Tue, 22 Nov 2011 15:55:30 +0000 Subject: [PATCH 107/364] sctp: integer overflow in sctp_auth_create_key() The previous commit 30c2235c is incomplete and cannot prevent integer overflows. For example, when key_len is 0x80000000 (INT_MAX + 1), the left-hand side of the check, (INT_MAX - key_len), which is unsigned, becomes 0xffffffff (UINT_MAX) and bypasses the check. Signed-off-by: Xi Wang Signed-off-by: David S. Miller From ae7cc709f2ec11b49fc31b20cd8c943794ae9576 Mon Sep 17 00:00:00 2001 From: John F Leach Date: Mon, 28 Nov 2011 19:41:27 -0500 Subject: [PATCH 108/364] ALSA: usb-audio - Support for Roland GAIA SH-01 Synthesizer Added table quirks entry for Roland GAIA SH-01 Synthesizer based upon Roland SH-201 table entry as template. USB MIDI and audio was tested with Muse and Audacity. Signed-off-by: John F Leach Signed-off-by: Takashi Iwai --- sound/usb/quirks-table.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index b61945f3af9e..32d2a21f2e3b 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -1632,6 +1632,37 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, +{ + /* Roland GAIA SH-01 */ + USB_DEVICE(0x0582, 0x0111), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Roland", + .product_name = "GAIA", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 1, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = &(const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0003, + .in_cables = 0x0003 + } + }, + { + .ifnum = -1 + } + } + } +}, { USB_DEVICE(0x0582, 0x0113), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { From 4f718a29fe4908c2cea782f751e9805319684e2b Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Nov 2011 09:44:14 +0100 Subject: [PATCH 109/364] firmware: Sigma: Prevent out of bounds memory access The SigmaDSP firmware loader currently does not perform enough boundary size checks when processing the firmware. As a result it is possible that a malformed firmware can cause an out of bounds memory access. This patch adds checks which ensure that both the action header and the payload are completely inside the firmware data boundaries before processing them. Signed-off-by: Lars-Peter Clausen Acked-by: Mike Frysinger Signed-off-by: Mark Brown Cc: stable@kernel.org --- drivers/firmware/sigma.c | 78 ++++++++++++++++++++++++++++------------ include/linux/sigma.h | 5 --- 2 files changed, 56 insertions(+), 27 deletions(-) diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c index f10fc521951b..c780baa59ed9 100644 --- a/drivers/firmware/sigma.c +++ b/drivers/firmware/sigma.c @@ -14,13 +14,34 @@ #include #include -/* Return: 0==OK, <0==error, =1 ==no more actions */ -static int -process_sigma_action(struct i2c_client *client, struct sigma_firmware *ssfw) +static size_t sigma_action_size(struct sigma_action *sa) +{ + size_t payload = 0; + + switch (sa->instr) { + case SIGMA_ACTION_WRITEXBYTES: + case SIGMA_ACTION_WRITESINGLE: + case SIGMA_ACTION_WRITESAFELOAD: + payload = sigma_action_len(sa); + break; + default: + break; + } + + payload = ALIGN(payload, 2); + + return payload + sizeof(struct sigma_action); +} + +/* + * Returns a negative error value in case of an error, 0 if processing of + * the firmware should be stopped after this action, 1 otherwise. + */ +static int +process_sigma_action(struct i2c_client *client, struct sigma_action *sa) { - struct sigma_action *sa = (void *)(ssfw->fw->data + ssfw->pos); size_t len = sigma_action_len(sa); - int ret = 0; + int ret; pr_debug("%s: instr:%i addr:%#x len:%zu\n", __func__, sa->instr, sa->addr, len); @@ -29,44 +50,50 @@ process_sigma_action(struct i2c_client *client, struct sigma_firmware *ssfw) case SIGMA_ACTION_WRITEXBYTES: case SIGMA_ACTION_WRITESINGLE: case SIGMA_ACTION_WRITESAFELOAD: - if (ssfw->fw->size < ssfw->pos + len) - return -EINVAL; ret = i2c_master_send(client, (void *)&sa->addr, len); if (ret < 0) return -EINVAL; break; - case SIGMA_ACTION_DELAY: - ret = 0; udelay(len); len = 0; break; - case SIGMA_ACTION_END: - return 1; - + return 0; default: return -EINVAL; } - /* when arrive here ret=0 or sent data */ - ssfw->pos += sigma_action_size(sa, len); - return ssfw->pos == ssfw->fw->size; + return 1; } static int process_sigma_actions(struct i2c_client *client, struct sigma_firmware *ssfw) { - pr_debug("%s: processing %p\n", __func__, ssfw); + struct sigma_action *sa; + size_t size; + int ret; + + while (ssfw->pos + sizeof(*sa) <= ssfw->fw->size) { + sa = (struct sigma_action *)(ssfw->fw->data + ssfw->pos); + + size = sigma_action_size(sa); + ssfw->pos += size; + if (ssfw->pos > ssfw->fw->size || size == 0) + break; + + ret = process_sigma_action(client, sa); - while (1) { - int ret = process_sigma_action(client, ssfw); pr_debug("%s: action returned %i\n", __func__, ret); - if (ret == 1) - return 0; - else if (ret) + + if (ret <= 0) return ret; } + + if (ssfw->pos != ssfw->fw->size) + return -EINVAL; + + return 0; } int process_sigma_firmware(struct i2c_client *client, const char *name) @@ -89,7 +116,14 @@ int process_sigma_firmware(struct i2c_client *client, const char *name) /* then verify the header */ ret = -EINVAL; - if (fw->size < sizeof(*ssfw_head)) + + /* + * Reject too small or unreasonable large files. The upper limit has been + * chosen a bit arbitrarily, but it should be enough for all practical + * purposes and having the limit makes it easier to avoid integer + * overflows later in the loading process. + */ + if (fw->size < sizeof(*ssfw_head) || fw->size >= 0x4000000) goto done; ssfw_head = (void *)fw->data; diff --git a/include/linux/sigma.h b/include/linux/sigma.h index e2accb3164d8..9a138c2946bb 100644 --- a/include/linux/sigma.h +++ b/include/linux/sigma.h @@ -50,11 +50,6 @@ static inline u32 sigma_action_len(struct sigma_action *sa) return (sa->len_hi << 16) | sa->len; } -static inline size_t sigma_action_size(struct sigma_action *sa, u32 payload_len) -{ - return sizeof(*sa) + payload_len + (payload_len % 2); -} - extern int process_sigma_firmware(struct i2c_client *client, const char *name); #endif From c56935bdc0a8edf50237d3b0205133a5b0adc604 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Nov 2011 09:44:15 +0100 Subject: [PATCH 110/364] firmware: Sigma: Skip header during CRC generation The firmware header is not part of the CRC, so skip it. Otherwise the firmware will be rejected due to non-matching CRCs. Signed-off-by: Lars-Peter Clausen Acked-by: Mike Frysinger Signed-off-by: Mark Brown Cc: stable@kernel.org --- drivers/firmware/sigma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c index c780baa59ed9..36265de0a9e8 100644 --- a/drivers/firmware/sigma.c +++ b/drivers/firmware/sigma.c @@ -130,7 +130,8 @@ int process_sigma_firmware(struct i2c_client *client, const char *name) if (memcmp(ssfw_head->magic, SIGMA_MAGIC, ARRAY_SIZE(ssfw_head->magic))) goto done; - crc = crc32(0, fw->data, fw->size); + crc = crc32(0, fw->data + sizeof(*ssfw_head), + fw->size - sizeof(*ssfw_head)); pr_debug("%s: crc=%x\n", __func__, crc); if (crc != ssfw_head->crc) goto done; From bda63586bc5929e97288cdb371bb6456504867ed Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 28 Nov 2011 09:44:16 +0100 Subject: [PATCH 111/364] firmware: Sigma: Fix endianess issues Currently the SigmaDSP firmware loader only works correctly on little-endian systems. Fix this by using the proper endianess conversion functions. Signed-off-by: Lars-Peter Clausen Acked-by: Mike Frysinger Signed-off-by: Mark Brown Cc: stable@kernel.org --- drivers/firmware/sigma.c | 2 +- include/linux/sigma.h | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c index 36265de0a9e8..1eedb6f7fdab 100644 --- a/drivers/firmware/sigma.c +++ b/drivers/firmware/sigma.c @@ -133,7 +133,7 @@ int process_sigma_firmware(struct i2c_client *client, const char *name) crc = crc32(0, fw->data + sizeof(*ssfw_head), fw->size - sizeof(*ssfw_head)); pr_debug("%s: crc=%x\n", __func__, crc); - if (crc != ssfw_head->crc) + if (crc != le32_to_cpu(ssfw_head->crc)) goto done; ssfw.pos = sizeof(*ssfw_head); diff --git a/include/linux/sigma.h b/include/linux/sigma.h index 9a138c2946bb..d0de882c0d96 100644 --- a/include/linux/sigma.h +++ b/include/linux/sigma.h @@ -24,7 +24,7 @@ struct sigma_firmware { struct sigma_firmware_header { unsigned char magic[7]; u8 version; - u32 crc; + __le32 crc; }; enum { @@ -40,14 +40,14 @@ enum { struct sigma_action { u8 instr; u8 len_hi; - u16 len; - u16 addr; + __le16 len; + __be16 addr; unsigned char payload[]; }; static inline u32 sigma_action_len(struct sigma_action *sa) { - return (sa->len_hi << 16) | sa->len; + return (sa->len_hi << 16) | le16_to_cpu(sa->len); } extern int process_sigma_firmware(struct i2c_client *client, const char *name); From 542c9a0a2fa351149c4a3467589a54cafcf0a1dd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 29 Nov 2011 13:01:30 +0100 Subject: [PATCH 112/364] ALSA: hda - Avoid touching mute-VREF pin for IDT codecs Some HP laptops use a pin VREF for controlling the mute LED, and such a pin shouldn't be powered off. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index f3658658548e..f4f4ebeed9ea 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4441,7 +4441,9 @@ static int stac92xx_init(struct hda_codec *codec) int pinctl, def_conf; /* power on when no jack detection is available */ - if (!spec->hp_detect) { + /* or when the VREF is used for controlling LED */ + if (!spec->hp_detect || + (spec->gpio_led > 8 && spec->gpio_led == nid)) { stac_toggle_power_map(codec, nid, 1); continue; } From 4f8b6c7dc80ac9619db033c7f6fc355eab9514f5 Mon Sep 17 00:00:00 2001 From: Marc Vertes Date: Tue, 29 Nov 2011 12:21:17 +0100 Subject: [PATCH 113/364] ALSA: hda_intel - revert a quirk that affect VIA chipsets This quirk sould be reverted. It has the following probems: 1) The quirk was intended to "ASUS MV2-MX SE" motherboards only, but the ID used matches a much broader range, potentially all boards containing a VIA chipset model in the family of vendor VIA 0x1106 and audio device ID 0x3288, which encompasses VIA-VT82xx, VIA-VT1xx and VIA-VT20xx chipsets. 2) VIA chipsets rely on azx_via_get_position() to handle correctly dma transfers during capture. Using POS_FIX_LPIB instead of POS_FIX_VIACOMBO leads to partially corrupted input buffers during capture. The effects of this bug are not immediately visible, it took strong DSP expertise, some expensive signal generator and a spectrum analyzer to identify it and verify correct behaviour using original default. 3) It's almost certain that the quirk did not fix the real problem, if there was one. Refer to original submission: http://mailman.alsa-project.org/pipermail/alsa-devel/2010-February/025109.html Signed-of-by: Marc Vertes Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 096507d2ca9a..7d98240def0b 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2508,7 +2508,6 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB), SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB), - SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB), SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB), SND_PCI_QUIRK(0x1458, 0xa022, "ga-ma770-ud3", POS_FIX_LPIB), SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB), From 5d193ce8f1fa7c67c7fd7be2c03ef31eed344a4f Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 22 Nov 2011 17:18:24 -0800 Subject: [PATCH 114/364] usb: musb: PM: fix context save/restore in suspend/resume path Currently the driver tries to save context in the suspend path, but will cause an abort if the device is already runtime suspended. This happens, for example, if MUSB loaded/compiled-in, in host mode, but no USB devices are attached. MUSB will be runtime suspended, but then attempting a system suspend will crash due to the context save being attempted while the device is disabled. On OMAP, as of v3.1, the driver's ->runtime_suspend() callback will be called late in the suspend path (by the PM domain layer) if the driver is not already runtime suspended, ensuring a full shutdown. Therefore, the context save is not needed in the ->suspend() method since it will be called in the ->runtime_suspend() method anyways (similarily for resume.) NOTE: this leaves the suspend/resume methods basically empty (with some FIXMEs and comments, but I'll leave it to the maintainers to decide whether to remove them. Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index c1fa12ec7a9a..b63ab1570103 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2301,18 +2301,12 @@ static int musb_suspend(struct device *dev) */ } - musb_save_context(musb); - spin_unlock_irqrestore(&musb->lock, flags); return 0; } static int musb_resume_noirq(struct device *dev) { - struct musb *musb = dev_to_musb(dev); - - musb_restore_context(musb); - /* for static cmos like DaVinci, register values were preserved * unless for some reason the whole soc powered down or the USB * module got reset through the PSC (vs just being disabled). From f8eff0a06116aee127152674e9ea9c51aecf6b69 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:19:06 -0800 Subject: [PATCH 115/364] usb: renesas_usbhs: fixup device_register timing current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). But bind() function will fail if it was called before device_register() (or device_add()). This patch modifies this issue. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/mod_gadget.c | 37 ++++++++------------------ 1 file changed, 11 insertions(+), 26 deletions(-) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index d9717e0bc1ff..ef82274ce70b 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -751,53 +751,31 @@ static int usbhsg_gadget_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); - struct usbhs_priv *priv; - struct device *dev; - int ret; + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); if (!driver || !driver->setup || driver->speed != USB_SPEED_HIGH) return -EINVAL; - dev = usbhsg_gpriv_to_dev(gpriv); - priv = usbhsg_gpriv_to_priv(gpriv); - /* first hook up the driver ... */ gpriv->driver = driver; gpriv->gadget.dev.driver = &driver->driver; - ret = device_add(&gpriv->gadget.dev); - if (ret) { - dev_err(dev, "device_add error %d\n", ret); - goto add_fail; - } - return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD); - -add_fail: - gpriv->driver = NULL; - gpriv->gadget.dev.driver = NULL; - - return ret; } static int usbhsg_gadget_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); - struct usbhs_priv *priv; - struct device *dev; + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); if (!driver || !driver->unbind) return -EINVAL; - dev = usbhsg_gpriv_to_dev(gpriv); - priv = usbhsg_gpriv_to_priv(gpriv); - usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); - device_del(&gpriv->gadget.dev); gpriv->driver = NULL; return 0; @@ -876,12 +854,14 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) /* * init gadget */ - device_initialize(&gpriv->gadget.dev); dev_set_name(&gpriv->gadget.dev, "gadget"); gpriv->gadget.dev.parent = dev; gpriv->gadget.name = "renesas_usbhs_udc"; gpriv->gadget.ops = &usbhsg_gadget_ops; gpriv->gadget.is_dualspeed = 1; + ret = device_register(&gpriv->gadget.dev); + if (ret < 0) + goto err_add_udc; INIT_LIST_HEAD(&gpriv->gadget.ep_list); @@ -912,12 +892,15 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) ret = usb_add_gadget_udc(dev, &gpriv->gadget); if (ret) - goto err_add_udc; + goto err_register; dev_info(dev, "gadget probed\n"); return 0; + +err_register: + device_unregister(&gpriv->gadget.dev); err_add_udc: kfree(gpriv->uep); @@ -933,6 +916,8 @@ void usbhs_mod_gadget_remove(struct usbhs_priv *priv) usb_del_gadget_udc(&gpriv->gadget); + device_unregister(&gpriv->gadget.dev); + usbhsg_controller_unregister(gpriv); kfree(gpriv->uep); From 8885a897c26b2f63e1bbb6fa7bd9da3a73a09113 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:19:38 -0800 Subject: [PATCH 116/364] usb: renesas_usbhs: fixup signal the driver that cable was disconnected current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). cable disconnected signal was needed. This patch fixup it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/mod_gadget.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index ef82274ce70b..f4b032ed326a 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -805,6 +805,13 @@ static int usbhsg_start(struct usbhs_priv *priv) static int usbhsg_stop(struct usbhs_priv *priv) { + struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); + + /* cable disconnect */ + if (gpriv->driver && + gpriv->driver->disconnect) + gpriv->driver->disconnect(&gpriv->gadget); + return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED); } From 0cdd7d4b66aa740ce62aeeaf7fbd495130c2864f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:19:56 -0800 Subject: [PATCH 117/364] usb: renesas_usbhs: fixup gadget.dev.driver when udc_stop. current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). But current renesas_usbhs driver didn't care about gadget.dev.driver when udc_stop. it cause rmmod oops. This patch care it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/mod_gadget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index f4b032ed326a..2be73817e47f 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -776,6 +776,7 @@ static int usbhsg_gadget_stop(struct usb_gadget *gadget, return -EINVAL; usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); + gpriv->gadget.dev.driver = NULL; gpriv->driver = NULL; return 0; From 89f829a50f7d0d0f3a15c482a7a65dd0b133a5f5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 17 Nov 2011 18:20:44 -0800 Subject: [PATCH 118/364] usb: renesas_usbhs: fixup driver speed This patch cares latest USB_SPEED_SUPER support. renesas_usbhs can not use super-speed, but can use full/high speed. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/mod_gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 2be73817e47f..7f4e80338570 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -755,7 +755,7 @@ static int usbhsg_gadget_start(struct usb_gadget *gadget, if (!driver || !driver->setup || - driver->speed != USB_SPEED_HIGH) + driver->speed < USB_SPEED_FULL) return -EINVAL; /* first hook up the driver ... */ From fef6964452abae55c82e1615ac505b8377df00e9 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 18 Nov 2011 20:16:27 +0100 Subject: [PATCH 119/364] usb: gadget: fix g_serial regression Commit "usb: gadget: use config_ep_by_speed() instead of ep_choose()" broke g_serial in "non ACM nor OBEX" mode. Apply a trivial fix on usb endpoints discovery. Signed-off-by: Robert Jarzmik Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_serial.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c index 91fdf790ed20..cf33a8d0fd5d 100644 --- a/drivers/usb/gadget/f_serial.c +++ b/drivers/usb/gadget/f_serial.c @@ -131,8 +131,8 @@ static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt) } if (!gser->port.in->desc || !gser->port.out->desc) { DBG(cdev, "activate generic ttyGS%d\n", gser->port_num); - if (!config_ep_by_speed(cdev->gadget, f, gser->port.in) || - !config_ep_by_speed(cdev->gadget, f, gser->port.out)) { + if (config_ep_by_speed(cdev->gadget, f, gser->port.in) || + config_ep_by_speed(cdev->gadget, f, gser->port.out)) { gser->port.in->desc = NULL; gser->port.out->desc = NULL; return -EINVAL; From bfe0658b402dab3d6fbef4b7bd81a46d0e68eb86 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Sat, 19 Nov 2011 18:26:25 +0100 Subject: [PATCH 120/364] usb: udc: Fix gadget driver's speed check in various UDC drivers Several UDC drivers had a gadget driver's speed sanity check of the form of: driver->speed != USB_SPEED_HIGH or: driver->speed != USB_SPEED_HIGH && driver->speed != USB_SPEED_FULL As more and more gadget drivers support USB SuperSpeed, driver->speed may be set to USB_SPEED_SUPER and UDC driver should handle such gadget correctly. The above checks however fail to recognise USB_SPEED_SUPER as a valid speed. This commit changes the two checks to: driver->speed < USB_SPEED_HIGH or: driver->speed < USB_SPEED_FULL respectively. Signed-off-by: Michal Nazarewicz Reported-by: Alan Stern Tested-by: Heiko Stuebner Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/amd5536udc.c | 2 +- drivers/usb/gadget/fsl_qe_udc.c | 3 +-- drivers/usb/gadget/fsl_udc_core.c | 3 +-- drivers/usb/gadget/m66592-udc.c | 2 +- drivers/usb/gadget/net2280.c | 2 +- drivers/usb/gadget/r8a66597-udc.c | 2 +- drivers/usb/gadget/s3c-hsotg.c | 4 +--- drivers/usb/gadget/s3c-hsudc.c | 3 +-- drivers/usb/musb/musb_gadget.c | 2 +- 9 files changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 4730016d7cd4..45f422ac103f 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -1959,7 +1959,7 @@ static int amd5536_start(struct usb_gadget_driver *driver, u32 tmp; if (!driver || !bind || !driver->setup - || driver->speed != USB_SPEED_HIGH) + || driver->speed < USB_SPEED_HIGH) return -EINVAL; if (!dev) return -ENODEV; diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 2a03e4de11c1..e00cf92409ce 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2336,8 +2336,7 @@ static int fsl_qe_start(struct usb_gadget_driver *driver, if (!udc_controller) return -ENODEV; - if (!driver || (driver->speed != USB_SPEED_FULL - && driver->speed != USB_SPEED_HIGH) + if (!driver || driver->speed < USB_SPEED_FULL || !bind || !driver->disconnect || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index b3b3d83b7c33..1482b12db81d 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1938,8 +1938,7 @@ static int fsl_start(struct usb_gadget_driver *driver, if (!udc_controller) return -ENODEV; - if (!driver || (driver->speed != USB_SPEED_FULL - && driver->speed != USB_SPEED_HIGH) + if (!driver || driver->speed < USB_SPEED_FULL || !bind || !driver->disconnect || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 91d0af2a24a8..9aa1cbbee45b 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1472,7 +1472,7 @@ static int m66592_start(struct usb_gadget_driver *driver, int retval; if (!driver - || driver->speed != USB_SPEED_HIGH + || driver->speed < USB_SPEED_HIGH || !bind || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 7f1bc9a73cda..da2b9d0be3ca 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -1881,7 +1881,7 @@ static int net2280_start(struct usb_gadget *_gadget, * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE) * "must not be used in normal operation" */ - if (!driver || driver->speed != USB_SPEED_HIGH + if (!driver || driver->speed < USB_SPEED_HIGH || !driver->setup) return -EINVAL; diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 24f84b210ce1..fc719a3f8557 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1746,7 +1746,7 @@ static int r8a66597_start(struct usb_gadget *gadget, struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); if (!driver - || driver->speed != USB_SPEED_HIGH + || driver->speed < USB_SPEED_HIGH || !driver->setup) return -EINVAL; if (!r8a66597) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index a552453dc946..b31448229f0b 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2586,10 +2586,8 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver, return -EINVAL; } - if (driver->speed != USB_SPEED_HIGH && - driver->speed != USB_SPEED_FULL) { + if (driver->speed < USB_SPEED_FULL) dev_err(hsotg->dev, "%s: bad speed\n", __func__); - } if (!bind || !driver->setup) { dev_err(hsotg->dev, "%s: missing entry points\n", __func__); diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 8d54f893cefe..20a553b46aed 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -1142,8 +1142,7 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver, int ret; if (!driver - || (driver->speed != USB_SPEED_FULL && - driver->speed != USB_SPEED_HIGH) + || driver->speed < USB_SPEED_FULL || !bind || !driver->unbind || !driver->disconnect || !driver->setup) return -EINVAL; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index d51043acfe1a..922148ff8d29 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1903,7 +1903,7 @@ static int musb_gadget_start(struct usb_gadget *g, unsigned long flags; int retval = -EINVAL; - if (driver->speed != USB_SPEED_HIGH) + if (driver->speed < USB_SPEED_HIGH) goto err0; pm_runtime_get_sync(musb->controller); From 7c91d908f5af027ed14b3d103331f91f386c1043 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 22 Nov 2011 09:55:45 +0800 Subject: [PATCH 121/364] USB: fsl_udc_core: use usb_endpoint_xfer_isoc to judge ISO XFER Some ISO gadgets, like audio, has SYNC attribute as well as USB_ENDPOINT_XFER_ISOC for their bmAttributes at ISO endpoint descriptor. So, it needs to use usb_endpoint_xfer_isoc to judge ISO XFER. Signed-off-by: Peter Chen Acked-by: Michal Nazarewicz Acked-by: Li Yang Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_udc_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 1482b12db81d..bf1cd6e55ed9 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -877,7 +877,7 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) VDBG("%s, bad ep", __func__); return -EINVAL; } - if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (usb_endpoint_xfer_isoc(ep->desc)) { if (req->req.length > ep->ep.maxpacket) return -EMSGSIZE; } @@ -1032,7 +1032,7 @@ static int fsl_ep_set_halt(struct usb_ep *_ep, int value) goto out; } - if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (usb_endpoint_xfer_isoc(ep->desc)) { status = -EOPNOTSUPP; goto out; } From 65cd5c4d03563f7118c2e83b7a50928e461cbc1e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 22 Nov 2011 13:48:28 -0200 Subject: [PATCH 122/364] usb: fsl_mxc_udc.c: Fix build issue by including missing header file Fix the following build error: CC [M] drivers/usb/gadget/fsl_mxc_udc.o drivers/usb/gadget/fsl_mxc_udc.c: In function 'fsl_udc_clk_finalize': drivers/usb/gadget/fsl_mxc_udc.c:98: error: implicit declaration of function 'readl' drivers/usb/gadget/fsl_mxc_udc.c:100: error: implicit declaration of function 'writel' This error is caused by the follwing commit: (16fcb63: arm/imx: remove mx31_setup_weimcs( ) from mx31.h) ,which removed '#include ' from mx31.h. fsl_mxc_udc.c includes , which in turns includes mx31.h, so that's the reason fsl_mxc_udc.c built fine previously. Instead of relying on the indirect inclusion of the linux/io.h header file, include it directly in fsl_mxc_udc.c. Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_mxc_udc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 43a49ecc1f36..23eaecfa3ed3 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -16,6 +16,7 @@ #include #include #include +#include #include From 5ce1d0eb1cd1071347618d0a95515f300239d201 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 22 Nov 2011 13:48:29 -0200 Subject: [PATCH 123/364] usb: fsl_mxc_udc.c: Remove compile-time dependency of MX35 SoC type In order to support multiple SoC kernel image, compile-time dependency on a specific SoC type should be avoided. fsl_udc_clk_finalize is already protected by cpu_is_mx35(), so remove the compile-time check for CONFIG_SOC_IMX35. Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_mxc_udc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 23eaecfa3ed3..dcbc0a2e48dd 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -89,7 +89,6 @@ eenahb: void fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -#if defined(CONFIG_SOC_IMX35) if (cpu_is_mx35()) { unsigned int v; @@ -102,7 +101,6 @@ void fsl_udc_clk_finalize(struct platform_device *pdev) USBPHYCTRL_OTGBASE_OFFSET)); } } -#endif /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { From 6414e94c203d92b163ca61b5f51a25b80a621dbe Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 23 Nov 2011 20:12:56 +0800 Subject: [PATCH 124/364] usb: gadget: fsl_udc: fix dequeuing a request in progress The original implementation of dequeuing a request in progress is not correct. Change to use a correct process and also clean up the related functions a little bit. Signed-off-by: Li Yang Acked-by: Peter Chen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_udc_core.c | 68 +++++++++++++++---------------- drivers/usb/gadget/fsl_usb2_udc.h | 10 +++++ 2 files changed, 42 insertions(+), 36 deletions(-) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index bf1cd6e55ed9..dd28ef3def71 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -696,12 +696,31 @@ static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req) kfree(req); } -/*-------------------------------------------------------------------------*/ +/* Actually add a dTD chain to an empty dQH and let go */ +static void fsl_prime_ep(struct fsl_ep *ep, struct ep_td_struct *td) +{ + struct ep_queue_head *qh = get_qh_by_ep(ep); + + /* Write dQH next pointer and terminate bit to 0 */ + qh->next_dtd_ptr = cpu_to_hc32(td->td_dma + & EP_QUEUE_HEAD_NEXT_POINTER_MASK); + + /* Clear active and halt bit */ + qh->size_ioc_int_sts &= cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE + | EP_QUEUE_HEAD_STATUS_HALT)); + + /* Ensure that updates to the QH will occur before priming. */ + wmb(); + + /* Prime endpoint by writing correct bit to ENDPTPRIME */ + fsl_writel(ep_is_in(ep) ? (1 << (ep_index(ep) + 16)) + : (1 << (ep_index(ep))), &dr_regs->endpointprime); +} + +/* Add dTD chain to the dQH of an EP */ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) { - int i = ep_index(ep) * 2 + ep_is_in(ep); u32 temp, bitmask, tmp_stat; - struct ep_queue_head *dQH = &ep->udc->ep_qh[i]; /* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr); VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */ @@ -719,7 +738,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK); /* Read prime bit, if 1 goto done */ if (fsl_readl(&dr_regs->endpointprime) & bitmask) - goto out; + return; do { /* Set ATDTW bit in USBCMD */ @@ -736,28 +755,10 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd); if (tmp_stat) - goto out; + return; } - /* Write dQH next pointer and terminate bit to 0 */ - temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK; - dQH->next_dtd_ptr = cpu_to_hc32(temp); - - /* Clear active and halt bit */ - temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE - | EP_QUEUE_HEAD_STATUS_HALT)); - dQH->size_ioc_int_sts &= temp; - - /* Ensure that updates to the QH will occur before priming. */ - wmb(); - - /* Prime endpoint by writing 1 to ENDPTPRIME */ - temp = ep_is_in(ep) - ? (1 << (ep_index(ep) + 16)) - : (1 << (ep_index(ep))); - fsl_writel(temp, &dr_regs->endpointprime); -out: - return; + fsl_prime_ep(ep, req->head); } /* Fill in the dTD structure @@ -973,25 +974,20 @@ static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) /* The request isn't the last request in this ep queue */ if (req->queue.next != &ep->queue) { - struct ep_queue_head *qh; struct fsl_req *next_req; - qh = ep->qh; next_req = list_entry(req->queue.next, struct fsl_req, queue); - /* Point the QH to the first TD of next request */ - fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr); + /* prime with dTD of next request */ + fsl_prime_ep(ep, next_req->head); } - - /* The request hasn't been processed, patch up the TD chain */ + /* The request hasn't been processed, patch up the TD chain */ } else { struct fsl_req *prev_req; prev_req = list_entry(req->queue.prev, struct fsl_req, queue); - fsl_writel(fsl_readl(&req->tail->next_td_ptr), - &prev_req->tail->next_td_ptr); - + prev_req->tail->next_td_ptr = req->tail->next_td_ptr; } done(ep, req, -ECONNRESET); @@ -1068,7 +1064,7 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep) struct fsl_udc *udc; int size = 0; u32 bitmask; - struct ep_queue_head *d_qh; + struct ep_queue_head *qh; ep = container_of(_ep, struct fsl_ep, ep); if (!_ep || (!ep->desc && ep_index(ep) != 0)) @@ -1079,13 +1075,13 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep) if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - d_qh = &ep->udc->ep_qh[ep_index(ep) * 2 + ep_is_in(ep)]; + qh = get_qh_by_ep(ep); bitmask = (ep_is_in(ep)) ? (1 << (ep_index(ep) + 16)) : (1 << (ep_index(ep))); if (fsl_readl(&dr_regs->endptstatus) & bitmask) - size = (d_qh->size_ioc_int_sts & DTD_PACKET_SIZE) + size = (qh->size_ioc_int_sts & DTD_PACKET_SIZE) >> DTD_LENGTH_BIT_POS; pr_debug("%s %u\n", __func__, size); diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index 1d51be83fda8..f781f5dec417 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -569,6 +569,16 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length) * 2 + ((windex & USB_DIR_IN) ? 1 : 0)) #define get_pipe_by_ep(EP) (ep_index(EP) * 2 + ep_is_in(EP)) +static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep) +{ + /* we only have one ep0 structure but two queue heads */ + if (ep_index(ep) != 0) + return ep->qh; + else + return &ep->udc->ep_qh[(ep->udc->ep0_dir == + USB_DIR_IN) ? 1 : 0]; +} + struct platform_device; #ifdef CONFIG_ARCH_MXC int fsl_udc_clk_init(struct platform_device *pdev); From 4dd2cb4a28b7ab1f37163a4eba280926a13a8749 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 29 Nov 2011 12:06:14 -0600 Subject: [PATCH 125/364] xfs: force buffer writeback before blocking on the ilock in inode reclaim If we are doing synchronous inode reclaim we block the VM from making progress in memory reclaim. So if we encouter a flush locked inode promote it in the delwri list and wake up xfsbufd to write it out now. Without this we can get hangs of up to 30 seconds during workloads hitting synchronous inode reclaim. The scheme is copied from what we do for dquot reclaims. Reported-by: Simon Kirby Signed-off-by: Christoph Hellwig Tested-by: Simon Kirby Signed-off-by: Ben Myers --- fs/xfs/xfs_inode.c | 21 +++++++++++++++++++++ fs/xfs/xfs_inode.h | 1 + fs/xfs/xfs_sync.c | 11 +++++++++++ 3 files changed, 33 insertions(+) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index c0237c602f11..755ee8164880 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2835,6 +2835,27 @@ corrupt_out: return XFS_ERROR(EFSCORRUPTED); } +void +xfs_promote_inode( + struct xfs_inode *ip) +{ + struct xfs_buf *bp; + + ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED)); + + bp = xfs_incore(ip->i_mount->m_ddev_targp, ip->i_imap.im_blkno, + ip->i_imap.im_len, XBF_TRYLOCK); + if (!bp) + return; + + if (XFS_BUF_ISDELAYWRITE(bp)) { + xfs_buf_delwri_promote(bp); + wake_up_process(ip->i_mount->m_ddev_targp->bt_task); + } + + xfs_buf_relse(bp); +} + /* * Return a pointer to the extent record at file index idx. */ diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h index 760140d1dd66..b4cd4739f98e 100644 --- a/fs/xfs/xfs_inode.h +++ b/fs/xfs/xfs_inode.h @@ -498,6 +498,7 @@ int xfs_iunlink(struct xfs_trans *, xfs_inode_t *); void xfs_iext_realloc(xfs_inode_t *, int, int); void xfs_iunpin_wait(xfs_inode_t *); int xfs_iflush(xfs_inode_t *, uint); +void xfs_promote_inode(struct xfs_inode *); void xfs_lock_inodes(xfs_inode_t **, int, uint); void xfs_lock_two_inodes(xfs_inode_t *, xfs_inode_t *, uint); diff --git a/fs/xfs/xfs_sync.c b/fs/xfs/xfs_sync.c index aa3dc1a4d53d..be5c51d8f757 100644 --- a/fs/xfs/xfs_sync.c +++ b/fs/xfs/xfs_sync.c @@ -770,6 +770,17 @@ restart: if (!xfs_iflock_nowait(ip)) { if (!(sync_mode & SYNC_WAIT)) goto out; + + /* + * If we only have a single dirty inode in a cluster there is + * a fair chance that the AIL push may have pushed it into + * the buffer, but xfsbufd won't touch it until 30 seconds + * from now, and thus we will lock up here. + * + * Promote the inode buffer to the front of the delwri list + * and wake up xfsbufd now. + */ + xfs_promote_inode(ip); xfs_iflock(ip); } From 4c393a6059f8442a70512a48ce4639b882b6f6ad Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 19 Nov 2011 17:44:30 +0000 Subject: [PATCH 126/364] xfs: fix attr2 vs large data fork assert With Dmitry fsstress updates I've seen very reproducible crashes in xfs_attr_shortform_remove because xfs_attr_shortform_bytesfit claims that the attributes would not fit inline into the inode after removing an attribute. It turns out that we were operating on an inode with lots of delalloc extents, and thus an if_bytes values for the data fork that is larger than biggest possible on-disk storage for it which utterly confuses the code near the end of xfs_attr_shortform_bytesfit. Fix this by always allowing the current attribute fork, like we already do for the attr1 format, given that delalloc conversion will take care for moving either the data or attribute area out of line if it doesn't fit at that point - or making the point moot by merging extents at this point. Also document the function better, and clean up some loose bits. Reviewed-by: Dave Chinner Signed-off-by: Christoph Hellwig Signed-off-by: Ben Myers --- fs/xfs/xfs_attr_leaf.c | 64 +++++++++++++++++++++++++----------------- 1 file changed, 39 insertions(+), 25 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index d4906e7c9787..c1b55e596551 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -110,6 +110,7 @@ xfs_attr_namesp_match(int arg_flags, int ondisk_flags) /* * Query whether the requested number of additional bytes of extended * attribute space will be able to fit inline. + * * Returns zero if not, else the di_forkoff fork offset to be used in the * literal area for attribute data once the new bytes have been added. * @@ -122,7 +123,7 @@ xfs_attr_shortform_bytesfit(xfs_inode_t *dp, int bytes) int offset; int minforkoff; /* lower limit on valid forkoff locations */ int maxforkoff; /* upper limit on valid forkoff locations */ - int dsize; + int dsize; xfs_mount_t *mp = dp->i_mount; offset = (XFS_LITINO(mp) - bytes) >> 3; /* rounded down */ @@ -136,47 +137,60 @@ xfs_attr_shortform_bytesfit(xfs_inode_t *dp, int bytes) return (offset >= minforkoff) ? minforkoff : 0; } - if (!(mp->m_flags & XFS_MOUNT_ATTR2)) { - if (bytes <= XFS_IFORK_ASIZE(dp)) - return dp->i_d.di_forkoff; + /* + * If the requested numbers of bytes is smaller or equal to the + * current attribute fork size we can always proceed. + * + * Note that if_bytes in the data fork might actually be larger than + * the current data fork size is due to delalloc extents. In that + * case either the extent count will go down when they are converted + * to real extents, or the delalloc conversion will take care of the + * literal area rebalancing. + */ + if (bytes <= XFS_IFORK_ASIZE(dp)) + return dp->i_d.di_forkoff; + + /* + * For attr2 we can try to move the forkoff if there is space in the + * literal area, but for the old format we are done if there is no + * space in the fixed attribute fork. + */ + if (!(mp->m_flags & XFS_MOUNT_ATTR2)) return 0; - } dsize = dp->i_df.if_bytes; - + switch (dp->i_d.di_format) { case XFS_DINODE_FMT_EXTENTS: - /* + /* * If there is no attr fork and the data fork is extents, - * determine if creating the default attr fork will result - * in the extents form migrating to btree. If so, the - * minimum offset only needs to be the space required for + * determine if creating the default attr fork will result + * in the extents form migrating to btree. If so, the + * minimum offset only needs to be the space required for * the btree root. - */ + */ if (!dp->i_d.di_forkoff && dp->i_df.if_bytes > xfs_default_attroffset(dp)) dsize = XFS_BMDR_SPACE_CALC(MINDBTPTRS); break; - case XFS_DINODE_FMT_BTREE: /* - * If have data btree then keep forkoff if we have one, - * otherwise we are adding a new attr, so then we set - * minforkoff to where the btree root can finish so we have + * If we have a data btree then keep forkoff if we have one, + * otherwise we are adding a new attr, so then we set + * minforkoff to where the btree root can finish so we have * plenty of room for attrs */ if (dp->i_d.di_forkoff) { - if (offset < dp->i_d.di_forkoff) + if (offset < dp->i_d.di_forkoff) return 0; - else - return dp->i_d.di_forkoff; - } else - dsize = XFS_BMAP_BROOT_SPACE(dp->i_df.if_broot); + return dp->i_d.di_forkoff; + } + dsize = XFS_BMAP_BROOT_SPACE(dp->i_df.if_broot); break; } - - /* - * A data fork btree root must have space for at least + + /* + * A data fork btree root must have space for at least * MINDBTPTRS key/ptr pairs if the data fork is small or empty. */ minforkoff = MAX(dsize, XFS_BMDR_SPACE_CALC(MINDBTPTRS)); @@ -186,10 +200,10 @@ xfs_attr_shortform_bytesfit(xfs_inode_t *dp, int bytes) maxforkoff = XFS_LITINO(mp) - XFS_BMDR_SPACE_CALC(MINABTPTRS); maxforkoff = maxforkoff >> 3; /* rounded down */ - if (offset >= minforkoff && offset < maxforkoff) - return offset; if (offset >= maxforkoff) return maxforkoff; + if (offset >= minforkoff) + return offset; return 0; } From c89304b8ea34ab48ba6ae10e06a8b1b8c8212307 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Tue, 29 Nov 2011 09:26:30 +0000 Subject: [PATCH 127/364] sctp: better integer overflow check in sctp_auth_create_key() The check from commit 30c2235c is incomplete and cannot prevent cases like key_len = 0x80000000 (INT_MAX + 1). In that case, the left-hand side of the check (INT_MAX - key_len), which is unsigned, becomes 0xffffffff (UINT_MAX) and bypasses the check. However this shouldn't be a security issue. The function is called from the following two code paths: 1) setsockopt() 2) sctp_auth_asoc_set_secret() In case (1), sca_keylength is never going to exceed 65535 since it's bounded by a u16 from the user API. As such, the key length will never overflow. In case (2), sca_keylength is computed based on the user key (1 short) and 2 * key_vector (3 shorts) for a total of 7 * USHRT_MAX, which still will not overflow. In other words, this overflow check is not really necessary. Just make it more correct. Signed-off-by: Xi Wang Cc: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/auth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 865e68fef21c..bf812048cf6f 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -82,7 +82,7 @@ static struct sctp_auth_bytes *sctp_auth_create_key(__u32 key_len, gfp_t gfp) struct sctp_auth_bytes *key; /* Verify that we are not going to overflow INT_MAX */ - if ((INT_MAX - key_len) < sizeof(struct sctp_auth_bytes)) + if (key_len > (INT_MAX - sizeof(struct sctp_auth_bytes))) return NULL; /* Allocate the shared key */ From 1281bc256543eb610b14fa95ce1967397931a120 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Tue, 29 Nov 2011 10:10:54 +0000 Subject: [PATCH 128/364] netlabel: Fix build problems when IPv6 is not enabled A recent fix to the the NetLabel code caused build problem with configurations that did not have IPv6 enabled; see below: netlabel_kapi.c: In function 'netlbl_cfg_unlbl_map_add': netlabel_kapi.c:165:4: error: implicit declaration of function 'netlbl_af6list_add' This patch fixes this problem by making the IPv6 specific code conditional on the IPv6 configuration flags as we done in the rest of NetLabel and the network stack as a whole. We have to move some variable declarations around as a result so things may not be quite as pretty, but at least it builds cleanly now. Some additional IPv6 conditionals were added to the NetLabel code as well for the sake of consistency. Reported-by: Randy Dunlap Signed-off-by: Paul Moore Acked-by: Randy Dunlap Signed-off-by: David S. Miller --- net/netlabel/netlabel_kapi.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c index 7b372a763c60..824f184f7a9b 100644 --- a/net/netlabel/netlabel_kapi.c +++ b/net/netlabel/netlabel_kapi.c @@ -111,8 +111,6 @@ int netlbl_cfg_unlbl_map_add(const char *domain, struct netlbl_domaddr_map *addrmap = NULL; struct netlbl_domaddr4_map *map4 = NULL; struct netlbl_domaddr6_map *map6 = NULL; - const struct in_addr *addr4, *mask4; - const struct in6_addr *addr6, *mask6; entry = kzalloc(sizeof(*entry), GFP_ATOMIC); if (entry == NULL) @@ -133,9 +131,9 @@ int netlbl_cfg_unlbl_map_add(const char *domain, INIT_LIST_HEAD(&addrmap->list6); switch (family) { - case AF_INET: - addr4 = addr; - mask4 = mask; + case AF_INET: { + const struct in_addr *addr4 = addr; + const struct in_addr *mask4 = mask; map4 = kzalloc(sizeof(*map4), GFP_ATOMIC); if (map4 == NULL) goto cfg_unlbl_map_add_failure; @@ -148,9 +146,11 @@ int netlbl_cfg_unlbl_map_add(const char *domain, if (ret_val != 0) goto cfg_unlbl_map_add_failure; break; - case AF_INET6: - addr6 = addr; - mask6 = mask; + } +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + case AF_INET6: { + const struct in6_addr *addr6 = addr; + const struct in6_addr *mask6 = mask; map6 = kzalloc(sizeof(*map6), GFP_ATOMIC); if (map6 == NULL) goto cfg_unlbl_map_add_failure; @@ -167,6 +167,8 @@ int netlbl_cfg_unlbl_map_add(const char *domain, if (ret_val != 0) goto cfg_unlbl_map_add_failure; break; + } +#endif /* IPv6 */ default: goto cfg_unlbl_map_add_failure; break; @@ -225,9 +227,11 @@ int netlbl_cfg_unlbl_static_add(struct net *net, case AF_INET: addr_len = sizeof(struct in_addr); break; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) case AF_INET6: addr_len = sizeof(struct in6_addr); break; +#endif /* IPv6 */ default: return -EPFNOSUPPORT; } @@ -266,9 +270,11 @@ int netlbl_cfg_unlbl_static_del(struct net *net, case AF_INET: addr_len = sizeof(struct in_addr); break; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) case AF_INET6: addr_len = sizeof(struct in6_addr); break; +#endif /* IPv6 */ default: return -EPFNOSUPPORT; } From 746ae30f821a8533ffba7769e492f59a96fdbeec Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 24 Nov 2011 02:41:49 +0000 Subject: [PATCH 129/364] isdn: make sure strings are null terminated These strings come from the user. We strcpy() them inside cf_command() so we should check that they are NULL terminated and return an error if not. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/isdn/divert/divert_procfs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/isdn/divert/divert_procfs.c b/drivers/isdn/divert/divert_procfs.c index 33ec9e467772..9021182c4b76 100644 --- a/drivers/isdn/divert/divert_procfs.c +++ b/drivers/isdn/divert/divert_procfs.c @@ -242,6 +242,12 @@ static int isdn_divert_ioctl_unlocked(struct file *file, uint cmd, ulong arg) case IIOCDOCFINT: if (!divert_if.drv_to_name(dioctl.cf_ctrl.drvid)) return (-EINVAL); /* invalid driver */ + if (strnlen(dioctl.cf_ctrl.msn, sizeof(dioctl.cf_ctrl.msn)) == + sizeof(dioctl.cf_ctrl.msn)) + return -EINVAL; + if (strnlen(dioctl.cf_ctrl.fwd_nr, sizeof(dioctl.cf_ctrl.fwd_nr)) == + sizeof(dioctl.cf_ctrl.fwd_nr)) + return -EINVAL; if ((i = cf_command(dioctl.cf_ctrl.drvid, (cmd == IIOCDOCFACT) ? 1 : (cmd == IIOCDOCFDIS) ? 0 : 2, dioctl.cf_ctrl.cfproc, From 5dc5503f5a400be5a7dc611745a034f04b0679b8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 24 Nov 2011 02:42:09 +0000 Subject: [PATCH 130/364] isdn: avoid copying too long drvid "cfg->drvid" comes from the user so there is a possibility they didn't NUL terminate it properly. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_net.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index 1f73d7f7e024..2339d7396b9e 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -2756,6 +2756,9 @@ isdn_net_setcfg(isdn_net_ioctl_cfg * cfg) char *c, *e; + if (strnlen(cfg->drvid, sizeof(cfg->drvid)) == + sizeof(cfg->drvid)) + return -EINVAL; drvidx = -1; chidx = -1; strcpy(drvid, cfg->drvid); From 33dbc27f1ab3a37d04a8d226327fb3d384870e43 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 30 Sep 2011 08:55:50 +1000 Subject: [PATCH 131/364] drm/nouveau: add dumb ioctl support Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_display.c | 45 +++++++++++++++++++++++ drivers/gpu/drm/nouveau/nouveau_drv.c | 4 ++ drivers/gpu/drm/nouveau/nouveau_drv.h | 6 +++ 3 files changed, 55 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index ddbabefb4273..b12fd2c80812 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -369,3 +369,48 @@ nouveau_finish_page_flip(struct nouveau_channel *chan, spin_unlock_irqrestore(&dev->event_lock, flags); return 0; } + +int +nouveau_display_dumb_create(struct drm_file *file_priv, struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + struct nouveau_bo *bo; + int ret; + + args->pitch = roundup(args->width * (args->bpp / 8), 256); + args->size = args->pitch * args->height; + args->size = roundup(args->size, PAGE_SIZE); + + ret = nouveau_gem_new(dev, args->size, 0, TTM_PL_FLAG_VRAM, 0, 0, &bo); + if (ret) + return ret; + + ret = drm_gem_handle_create(file_priv, bo->gem, &args->handle); + drm_gem_object_unreference_unlocked(bo->gem); + return ret; +} + +int +nouveau_display_dumb_destroy(struct drm_file *file_priv, struct drm_device *dev, + uint32_t handle) +{ + return drm_gem_handle_delete(file_priv, handle); +} + +int +nouveau_display_dumb_map_offset(struct drm_file *file_priv, + struct drm_device *dev, + uint32_t handle, uint64_t *poffset) +{ + struct drm_gem_object *gem; + + gem = drm_gem_object_lookup(dev, file_priv, handle); + if (gem) { + struct nouveau_bo *bo = gem->driver_private; + *poffset = bo->bo.addr_space_offset; + drm_gem_object_unreference_unlocked(gem); + return 0; + } + + return -ENOENT; +} diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index 9f7bb1295262..9791d13c9e3b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -433,6 +433,10 @@ static struct drm_driver driver = { .gem_open_object = nouveau_gem_object_open, .gem_close_object = nouveau_gem_object_close, + .dumb_create = nouveau_display_dumb_create, + .dumb_map_offset = nouveau_display_dumb_map_offset, + .dumb_destroy = nouveau_display_dumb_destroy, + .name = DRIVER_NAME, .desc = DRIVER_DESC, #ifdef GIT_REVISION diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 29837da1098b..4c0be3a4ed88 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -1418,6 +1418,12 @@ int nouveau_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event); int nouveau_finish_page_flip(struct nouveau_channel *, struct nouveau_page_flip_state *); +int nouveau_display_dumb_create(struct drm_file *, struct drm_device *, + struct drm_mode_create_dumb *args); +int nouveau_display_dumb_map_offset(struct drm_file *, struct drm_device *, + uint32_t handle, uint64_t *offset); +int nouveau_display_dumb_destroy(struct drm_file *, struct drm_device *, + uint32_t handle); /* nv10_gpio.c */ int nv10_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag); From ffe2dee49023c2a47ef7e177ceb22ec6bcaecc11 Mon Sep 17 00:00:00 2001 From: Christoph Bumiller Date: Fri, 11 Nov 2011 20:47:58 +0100 Subject: [PATCH 132/364] drm/nvc0/gr: fix TP init for transform feedback offset queries Without this, they return bytes written since the last update of the offset, but we want the full offset. Trace shows setting this on GPC[0]/TP[0] is enough. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_graph.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c index a74e501afd25..ecfafd70cf0e 100644 --- a/drivers/gpu/drm/nouveau/nvc0_graph.c +++ b/drivers/gpu/drm/nouveau/nvc0_graph.c @@ -381,6 +381,8 @@ nvc0_graph_init_gpc_0(struct drm_device *dev) u8 tpnr[GPC_MAX]; int i, gpc, tpc; + nv_wr32(dev, TP_UNIT(0, 0, 0x5c), 1); /* affects TFB offset queries */ + /* * TP ROP UNKVAL(magic_not_rop_nr) * 450: 4/0/0/0 2 3 From 26cfa81357b67229f71d25b53cbfbdfb83a38bdf Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 17 Nov 2011 09:10:02 +1000 Subject: [PATCH 133/364] drm/nvd0/disp: fix sor dpms typo, preventing dpms on in some situations Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvd0_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvd0_display.c b/drivers/gpu/drm/nouveau/nvd0_display.c index 23d63b4b3d77..cb006a718e70 100644 --- a/drivers/gpu/drm/nouveau/nvd0_display.c +++ b/drivers/gpu/drm/nouveau/nvd0_display.c @@ -780,7 +780,7 @@ nvd0_sor_dpms(struct drm_encoder *encoder, int mode) continue; if (nv_partner != nv_encoder && - nv_partner->dcb->or == nv_encoder->or) { + nv_partner->dcb->or == nv_encoder->dcb->or) { if (nv_partner->last_dpms == DRM_MODE_DPMS_ON) return; break; From 1a97b4ace09d7d3fe213a73bc466ca33af98c91c Mon Sep 17 00:00:00 2001 From: Younes Manton Date: Tue, 22 Nov 2011 14:58:31 -0500 Subject: [PATCH 134/364] drm/nouveau: Keep RAMIN heap within the channel. The entire RAMIN is allocated to be 'size', but the heap is specified as 'base' + 'size' inside RAMIN, so it will overflow past RAMIN by 'base' bytes on NV50+ and clobber other allocatons unless it's size is adjusted. Signed-off-by: Younes Manton Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_object.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c index 02222c540aee..960c0ae0c0c3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_object.c +++ b/drivers/gpu/drm/nouveau/nouveau_object.c @@ -680,7 +680,7 @@ nouveau_gpuobj_channel_init_pramin(struct nouveau_channel *chan) return ret; } - ret = drm_mm_init(&chan->ramin_heap, base, size); + ret = drm_mm_init(&chan->ramin_heap, base, size - base); if (ret) { NV_ERROR(dev, "Error creating PRAMIN heap: %d\n", ret); nouveau_gpuobj_ref(NULL, &chan->ramin); From a10e9e1dbb39970f232b1e2b0e4f738e2d77079f Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 25 Nov 2011 16:35:34 +1000 Subject: [PATCH 135/364] drm/nouveau: fix oopses caused by clear being called on unpopulated ttms Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_sgdma.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c index b75258a9fe44..c8a463b76c89 100644 --- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c +++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c @@ -67,7 +67,10 @@ nouveau_sgdma_clear(struct ttm_backend *be) pci_unmap_page(dev->pdev, nvbe->pages[nvbe->nr_pages], PAGE_SIZE, PCI_DMA_BIDIRECTIONAL); } + nvbe->unmap_pages = false; } + + nvbe->pages = NULL; } static void From a55b68e06b593ef7311f4a1cf9d3ae349ef7e9ed Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 9 Nov 2011 15:30:08 +1000 Subject: [PATCH 136/364] drm/nv50/disp: silence compiler warning NFI why this only started appearing now. The use of the uninitialised var can't actually happen, so perhaps my compiler just got stupider. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_display.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index d23ca00e7d62..06de250fe617 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -616,7 +616,7 @@ nv50_display_unk10_handler(struct drm_device *dev) struct drm_nouveau_private *dev_priv = dev->dev_private; struct nv50_display *disp = nv50_display(dev); u32 unk30 = nv_rd32(dev, 0x610030), mc; - int i, crtc, or, type = OUTPUT_ANY; + int i, crtc, or = 0, type = OUTPUT_ANY; NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30); disp->irq.dcb = NULL; @@ -708,7 +708,7 @@ nv50_display_unk20_handler(struct drm_device *dev) struct nv50_display *disp = nv50_display(dev); u32 unk30 = nv_rd32(dev, 0x610030), tmp, pclk, script, mc = 0; struct dcb_entry *dcb; - int i, crtc, or, type = OUTPUT_ANY; + int i, crtc, or = 0, type = OUTPUT_ANY; NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30); dcb = disp->irq.dcb; From 1808958d27b1250295f01dff4997d8a8814adaab Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 28 Nov 2011 12:53:08 +0100 Subject: [PATCH 137/364] ARM: at91: fix clock conid for atmel_tcb.1 on 9260/9g20 The conid is supposed to be t0/t1/t2_clk. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Cc: stable --- arch/arm/mach-at91/at91sam9260.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index b84a9f642f59..0d20677fbef0 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), - CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), - CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), From 0e934e22f3fabb98c41737e2e30bd9db2668e935 Mon Sep 17 00:00:00 2001 From: Anders Darander Date: Wed, 30 Nov 2011 08:47:44 +0100 Subject: [PATCH 138/364] ARM: at91: Fix USB AT91 gadget registration Since 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b, various AT91 boards don't register at91_udc anymore due to depending on a now non-existing symbol. Fix the symbol name. Signed-off-by: Anders Darander Signed-off-by: Nicolas Ferre Cc: stable --- arch/arm/mach-at91/at91rm9200_devices.c | 2 +- arch/arm/mach-at91/at91sam9260_devices.c | 2 +- arch/arm/mach-at91/at91sam9261_devices.c | 2 +- arch/arm/mach-at91/at91sam9263_devices.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 66591fa53e05..ad930688358c 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 25e3464fb07f..629fa9774972 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ae78f4d03b73..a178b58b0b9c 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ad017eb1f8df..d5fbac9ff4fa 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { From a042994dd377d86bff9446ee76151ceb6267c9ba Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 28 Nov 2011 16:47:15 -0500 Subject: [PATCH 139/364] cfg80211: fix race on init and driver registration There is a theoretical race that if hit will trigger a crash. The race is between when we issue the first regulatory hint, regulatory_hint_core(), gets processed by the workqueue and between when the first device gets registered to the wireless core. This is not easy to reproduce but it was easy to do so through the regulatory simulator I have been working on. This is a port of the fix I implemented there [1]. [1] https://github.com/mcgrof/regsim/commit/a246ccf81f059cb662eee288aa13100f631e4cc8 Cc: stable@vger.kernel.org Cc: Johannes Berg Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/reg.c | 43 +++++++++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 16 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 186b7f2a27b6..0ec40715a67b 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -55,8 +55,17 @@ #define REG_DBG_PRINT(args...) #endif +static struct regulatory_request core_request_world = { + .initiator = NL80211_REGDOM_SET_BY_CORE, + .alpha2[0] = '0', + .alpha2[1] = '0', + .intersect = false, + .processed = true, + .country_ie_env = ENVIRON_ANY, +}; + /* Receipt of information from last regulatory request */ -static struct regulatory_request *last_request; +static struct regulatory_request *last_request = &core_request_world; /* To trigger userspace events */ static struct platform_device *reg_pdev; @@ -148,7 +157,7 @@ static char user_alpha2[2]; module_param(ieee80211_regdom, charp, 0444); MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); -static void reset_regdomains(void) +static void reset_regdomains(bool full_reset) { /* avoid freeing static information or freeing something twice */ if (cfg80211_regdomain == cfg80211_world_regdom) @@ -163,6 +172,13 @@ static void reset_regdomains(void) cfg80211_world_regdom = &world_regdom; cfg80211_regdomain = NULL; + + if (!full_reset) + return; + + if (last_request != &core_request_world) + kfree(last_request); + last_request = &core_request_world; } /* @@ -173,7 +189,7 @@ static void update_world_regdomain(const struct ieee80211_regdomain *rd) { BUG_ON(!last_request); - reset_regdomains(); + reset_regdomains(false); cfg80211_world_regdom = rd; cfg80211_regdomain = rd; @@ -1405,7 +1421,8 @@ static int __regulatory_hint(struct wiphy *wiphy, } new_request: - kfree(last_request); + if (last_request != &core_request_world) + kfree(last_request); last_request = pending_request; last_request->intersect = intersect; @@ -1575,9 +1592,6 @@ static int regulatory_hint_core(const char *alpha2) { struct regulatory_request *request; - kfree(last_request); - last_request = NULL; - request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); if (!request) @@ -1775,7 +1789,7 @@ static void restore_regulatory_settings(bool reset_user) mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(); + reset_regdomains(true); restore_alpha2(alpha2, reset_user); /* @@ -2044,7 +2058,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) int r; if (last_request->initiator != NL80211_REGDOM_SET_BY_DRIVER) { - reset_regdomains(); + reset_regdomains(false); cfg80211_regdomain = rd; return 0; } @@ -2065,7 +2079,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) if (r) return r; - reset_regdomains(); + reset_regdomains(false); cfg80211_regdomain = rd; return 0; } @@ -2090,7 +2104,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) rd = NULL; - reset_regdomains(); + reset_regdomains(false); cfg80211_regdomain = intersected_rd; return 0; @@ -2110,7 +2124,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) kfree(rd); rd = NULL; - reset_regdomains(); + reset_regdomains(false); cfg80211_regdomain = intersected_rd; return 0; @@ -2263,11 +2277,8 @@ void /* __init_or_exit */ regulatory_exit(void) mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(); + reset_regdomains(true); - kfree(last_request); - - last_request = NULL; dev_set_uevent_suppress(®_pdev->dev, true); platform_device_unregister(reg_pdev); From 0bac71af6e66dc798bf07d0c0dd14ee5503362f9 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 28 Nov 2011 16:47:16 -0500 Subject: [PATCH 140/364] cfg80211: amend regulatory NULL dereference fix Johannes' patch for "cfg80211: fix regulatory NULL dereference" broke user regulaotry hints and it did not address the fact that last_request was left populated even if the previous regulatory hint was stale due to the wiphy disappearing. Fix user reguluatory hints by only bailing out if for those regulatory hints where a request_wiphy is expected. The stale last_request considerations are addressed through the previous fixes on last_request where we reset the last_request to a static world regdom request upon reset_regdomains(). In this case though we further enhance the effect by simply restoring reguluatory settings completely. Cc: stable@vger.kernel.org Cc: Johannes Berg Signed-off-by: Luis R. Rodriguez Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/reg.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 0ec40715a67b..074c1122ce42 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2049,8 +2049,10 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) } request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); - if (!request_wiphy) { - reg_set_request_processed(); + if (!request_wiphy && + (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || + last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)) { + schedule_delayed_work(®_timeout, 0); return -ENODEV; } From c72e8d335e2c6a309b6281f2abcf491f37b8b92b Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 30 Nov 2011 16:56:30 +0100 Subject: [PATCH 141/364] mac80211: fill rate filter for internal scan requests The rates bitmap for internal scan requests shoud be filled, otherwise there will be probe requests with zero rates supported. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- net/mac80211/main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index d999bf3b84e1..cae443563ec9 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -757,6 +757,12 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (!local->int_scan_req) return -ENOMEM; + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + if (!local->hw.wiphy->bands[band]) + continue; + local->int_scan_req->rates[band] = (u32) -1; + } + /* if low-level driver supports AP, we also support VLAN */ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) { hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN); From 15fc1f3617edea50fa58703d59f73e726377bc63 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 30 Nov 2011 17:07:21 -0500 Subject: [PATCH 142/364] net: fec: Select the FEC driver by default for i.MX SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 230dec6 (net/fec: add imx6q enet support) the FEC driver is no longer built by default for i.MX SoCs. Let the FEC driver be built by default again. Signed-off-by: Fabio Estevam Suggested-by: Uwe Kleine-König Acked-by: Uwe Kleine-König Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index c520cfd3b298..5272f9d4dda9 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig @@ -24,6 +24,7 @@ config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \ ARCH_MXC || ARCH_MXS) + default ARCH_MXC || ARCH_MXS if ARM select PHYLIB ---help--- Say Y here if you want to use the built-in 10/100 Fast ethernet From f7e57044eeb1841847c24aa06766c8290c202583 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 30 Nov 2011 04:08:58 +0000 Subject: [PATCH 143/364] sch_teql: fix lockdep splat We need rcu_read_lock() protection before using dst_get_neighbour(), and we must cache its value (pass it to __teql_resolve()) teql_master_xmit() is called under rcu_read_lock_bh() protection, its not enough. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_teql.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index a3b7120fcc74..4f4c52c0eeb3 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -225,11 +225,11 @@ static int teql_qdisc_init(struct Qdisc *sch, struct nlattr *opt) static int -__teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device *dev) +__teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, + struct net_device *dev, struct netdev_queue *txq, + struct neighbour *mn) { - struct netdev_queue *dev_queue = netdev_get_tx_queue(dev, 0); - struct teql_sched_data *q = qdisc_priv(dev_queue->qdisc); - struct neighbour *mn = dst_get_neighbour(skb_dst(skb)); + struct teql_sched_data *q = qdisc_priv(txq->qdisc); struct neighbour *n = q->ncache; if (mn->tbl == NULL) @@ -262,17 +262,26 @@ __teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device * } static inline int teql_resolve(struct sk_buff *skb, - struct sk_buff *skb_res, struct net_device *dev) + struct sk_buff *skb_res, + struct net_device *dev, + struct netdev_queue *txq) { - struct netdev_queue *txq = netdev_get_tx_queue(dev, 0); + struct dst_entry *dst = skb_dst(skb); + struct neighbour *mn; + int res; + if (txq->qdisc == &noop_qdisc) return -ENODEV; - if (dev->header_ops == NULL || - skb_dst(skb) == NULL || - dst_get_neighbour(skb_dst(skb)) == NULL) + if (!dev->header_ops || !dst) return 0; - return __teql_resolve(skb, skb_res, dev); + + rcu_read_lock(); + mn = dst_get_neighbour(dst); + res = mn ? __teql_resolve(skb, skb_res, dev, txq, mn) : 0; + rcu_read_unlock(); + + return res; } static netdev_tx_t teql_master_xmit(struct sk_buff *skb, struct net_device *dev) @@ -307,7 +316,7 @@ restart: continue; } - switch (teql_resolve(skb, skb_res, slave)) { + switch (teql_resolve(skb, skb_res, slave, slave_txq)) { case 0: if (__netif_tx_trylock(slave_txq)) { unsigned int length = qdisc_pkt_len(skb); From 218fa90f072e4aeff9003d57e390857f4f35513e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 29 Nov 2011 20:05:55 +0000 Subject: [PATCH 144/364] ipv4: fix lockdep splat in rt_cache_seq_show After commit f2c31e32b378 (fix NULL dereferences in check_peer_redir()), dst_get_neighbour() should be guarded by rcu_read_lock() / rcu_read_unlock() section. Reported-by: Miles Lane Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/route.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 5c2847247f51..57e01bc60947 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -417,9 +417,13 @@ static int rt_cache_seq_show(struct seq_file *seq, void *v) else { struct rtable *r = v; struct neighbour *n; - int len; + int len, HHUptod; + rcu_read_lock(); n = dst_get_neighbour(&r->dst); + HHUptod = (n && (n->nud_state & NUD_CONNECTED)) ? 1 : 0; + rcu_read_unlock(); + seq_printf(seq, "%s\t%08X\t%08X\t%8X\t%d\t%u\t%d\t" "%08X\t%d\t%u\t%u\t%02X\t%d\t%1d\t%08X%n", r->dst.dev ? r->dst.dev->name : "*", @@ -433,7 +437,7 @@ static int rt_cache_seq_show(struct seq_file *seq, void *v) dst_metric(&r->dst, RTAX_RTTVAR)), r->rt_key_tos, -1, - (n && (n->nud_state & NUD_CONNECTED)) ? 1 : 0, + HHUptod, r->rt_spec_dst, &len); seq_printf(seq, "%*s\n", 127 - len, ""); From 917fbdb32f37e9a93b00bb12ee83532982982df3 Mon Sep 17 00:00:00 2001 From: Henrik Saavedra Persson Date: Wed, 23 Nov 2011 23:37:15 +0000 Subject: [PATCH 145/364] bonding: only use primary address for ARP Only use the primary address of the bond device for master_ip. This will prevent changing the ARP source address in Active-Backup mode whenever a secondry address is added to the bond device. Signed-off-by: Henrik Saavedra Persson Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 33 ++++++--------------------------- 1 file changed, 6 insertions(+), 27 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b0c577256487..7f8756825b8a 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2553,30 +2553,6 @@ re_arm: } } -static __be32 bond_glean_dev_ip(struct net_device *dev) -{ - struct in_device *idev; - struct in_ifaddr *ifa; - __be32 addr = 0; - - if (!dev) - return 0; - - rcu_read_lock(); - idev = __in_dev_get_rcu(dev); - if (!idev) - goto out; - - ifa = idev->ifa_list; - if (!ifa) - goto out; - - addr = ifa->ifa_local; -out: - rcu_read_unlock(); - return addr; -} - static int bond_has_this_ip(struct bonding *bond, __be32 ip) { struct vlan_entry *vlan; @@ -3322,6 +3298,10 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, struct bonding *bond; struct vlan_entry *vlan; + /* we only care about primary address */ + if(ifa->ifa_flags & IFA_F_SECONDARY) + return NOTIFY_DONE; + list_for_each_entry(bond, &bn->dev_list, bond_list) { if (bond->dev == event_dev) { switch (event) { @@ -3329,7 +3309,7 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, bond->master_ip = ifa->ifa_local; return NOTIFY_OK; case NETDEV_DOWN: - bond->master_ip = bond_glean_dev_ip(bond->dev); + bond->master_ip = 0; return NOTIFY_OK; default: return NOTIFY_DONE; @@ -3345,8 +3325,7 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, vlan->vlan_ip = ifa->ifa_local; return NOTIFY_OK; case NETDEV_DOWN: - vlan->vlan_ip = - bond_glean_dev_ip(vlan_dev); + vlan->vlan_ip = 0; return NOTIFY_OK; default: return NOTIFY_DONE; From ea6a5d3b97b768561db6358f15e4c84ced0f4f7e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 30 Nov 2011 12:10:53 +0000 Subject: [PATCH 146/364] sch_red: fix red_calc_qavg_from_idle_time Since commit a4a710c4a7490587 (pkt_sched: Change PSCHED_SHIFT from 10 to 6) it seems RED/GRED are broken. red_calc_qavg_from_idle_time() computes a delay in us units, but this delay is now 16 times bigger than real delay, so the final qavg result smaller than expected. Use standard kernel time services since there is no need to obfuscate them. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/red.h | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/include/net/red.h b/include/net/red.h index 3319f16b3beb..b72a3b833936 100644 --- a/include/net/red.h +++ b/include/net/red.h @@ -116,7 +116,7 @@ struct red_parms { u32 qR; /* Cached random number */ unsigned long qavg; /* Average queue length: A scaled */ - psched_time_t qidlestart; /* Start of current idle period */ + ktime_t qidlestart; /* Start of current idle period */ }; static inline u32 red_rmask(u8 Plog) @@ -148,17 +148,17 @@ static inline void red_set_parms(struct red_parms *p, static inline int red_is_idling(struct red_parms *p) { - return p->qidlestart != PSCHED_PASTPERFECT; + return p->qidlestart.tv64 != 0; } static inline void red_start_of_idle_period(struct red_parms *p) { - p->qidlestart = psched_get_time(); + p->qidlestart = ktime_get(); } static inline void red_end_of_idle_period(struct red_parms *p) { - p->qidlestart = PSCHED_PASTPERFECT; + p->qidlestart.tv64 = 0; } static inline void red_restart(struct red_parms *p) @@ -170,13 +170,10 @@ static inline void red_restart(struct red_parms *p) static inline unsigned long red_calc_qavg_from_idle_time(struct red_parms *p) { - psched_time_t now; - long us_idle; + s64 delta = ktime_us_delta(ktime_get(), p->qidlestart); + long us_idle = min_t(s64, delta, p->Scell_max); int shift; - now = psched_get_time(); - us_idle = psched_tdiff_bounded(now, p->qidlestart, p->Scell_max); - /* * The problem: ideally, average length queue recalcultion should * be done over constant clock intervals. This is too expensive, so From 8f891489866ec62a87494eff3ed17c88152c32d4 Mon Sep 17 00:00:00 2001 From: "RongQing.Li" Date: Wed, 30 Nov 2011 23:43:07 -0500 Subject: [PATCH 147/364] net/core: fix rollback handler in register_netdevice_notifier Within nested statements, the break statement terminates only the do, for, switch, or while statement that immediately encloses it, So replace the break with goto. Signed-off-by: RongQing.Li Signed-off-by: David S. Miller --- net/core/dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 1482eea0bbf0..5a13edfc9f73 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1396,7 +1396,7 @@ rollback: for_each_net(net) { for_each_netdev(net, dev) { if (dev == last) - break; + goto outroll; if (dev->flags & IFF_UP) { nb->notifier_call(nb, NETDEV_GOING_DOWN, dev); @@ -1407,6 +1407,7 @@ rollback: } } +outroll: raw_notifier_chain_unregister(&netdev_chain, nb); goto unlock; } From 2a3267a489f1dc4284b64a4b88c62011946dc7ff Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 1 Dec 2011 14:35:29 +0800 Subject: [PATCH 148/364] arm/imx: fix return type of callback passed to of_irq_init() The of_irq_init() expects the callback passed by .data of of_device_id return 'int' instead of 'void'. This patch fixes it to have irq_init_cb() return the correct value, and in turn have the secondary interrupt controller (gpio in this case) initialized properly and also eliminate the error message 'of_irq_init: children remain, but no parents' which was overlooked before. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx6q.c | 4 +++- arch/arm/mach-mx5/imx51-dt.c | 7 +++++-- arch/arm/mach-mx5/imx53-dt.c | 7 +++++-- 3 files changed, 13 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 8bf5fa349484..eb7531bdfed7 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -36,7 +36,7 @@ static void __init imx6q_map_io(void) imx_scu_map_io(); } -static void __init imx6q_gpio_add_irq_domain(struct device_node *np, +static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -44,6 +44,8 @@ static void __init imx6q_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx6q_irq_match[] __initconst = { diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index ccc61585659b..3451a463a79a 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -44,13 +44,14 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx51_tzic_add_irq_domain(struct device_node *np, +static int __init imx51_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx51_gpio_add_irq_domain(struct device_node *np, +static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -58,6 +59,8 @@ static void __init imx51_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx51_irq_match[] __initconst = { diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index ccaa0b81b768..022bc0364b5f 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -48,13 +48,14 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx53_tzic_add_irq_domain(struct device_node *np, +static int __init imx53_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx53_gpio_add_irq_domain(struct device_node *np, +static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -62,6 +63,8 @@ static void __init imx53_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx53_irq_match[] __initconst = { From 04aafd713bae8a75933c7821dc012b0ec9046bca Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 1 Dec 2011 14:49:29 +0800 Subject: [PATCH 149/364] arm/imx: fix irq_base for gpio When gpio core dynamically allocate gpio number for a port, it starts from the end of the total range, 0 ~ ARCH_NR_GPIOS. That said, the earlier a port gets probed, the bigger gpio number it gets assigned. To match this, the irq_base for gpio should be assigned from 'MXC_GPIO_IRQ_START + ARCH_NR_GPIOS' decreasingly. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx6q.c | 5 ++--- arch/arm/mach-mx5/imx51-dt.c | 5 ++--- arch/arm/mach-mx5/imx53-dt.c | 5 ++--- 3 files changed, 6 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index eb7531bdfed7..22aa54aa9b2a 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -39,11 +39,10 @@ static void __init imx6q_map_io(void) static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx6q gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index 3451a463a79a..596edd967dbf 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -54,11 +54,10 @@ static int __init imx51_tzic_add_irq_domain(struct device_node *np, static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 4; /* imx51 gets 4 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index 022bc0364b5f..85bfd5ff21b0 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -58,11 +58,10 @@ static int __init imx53_tzic_add_irq_domain(struct device_node *np, static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx53 gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } From f64964796dedca340608fb1075ab6baad5625851 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 28 Nov 2011 14:49:26 -0500 Subject: [PATCH 150/364] drm/radeon/kms: add some loop timeouts in pageflip code Avoid infinite loops waiting for surface updates if a GPU reset happens while waiting for a page flip. See: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher Cc: stable@kernel.org Reviewed-by: Mario Kleiner Tested-by: Simon Farnsworth Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 7 ++++++- drivers/gpu/drm/radeon/r100.c | 7 ++++++- drivers/gpu/drm/radeon/rs600.c | 7 ++++++- drivers/gpu/drm/radeon/rv770.c | 7 ++++++- 4 files changed, 24 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 1d603a3335db..5e00d1670aa9 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -82,6 +82,7 @@ u32 evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset); + int i; /* Lock the graphics update lock */ tmp |= EVERGREEN_GRPH_UPDATE_LOCK; @@ -99,7 +100,11 @@ u32 evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) (u32)crtc_base); /* Wait for update_pending to go high. */ - while (!(RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset) & EVERGREEN_GRPH_SURFACE_UPDATE_PENDING)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(EVERGREEN_GRPH_UPDATE + radeon_crtc->crtc_offset) & EVERGREEN_GRPH_SURFACE_UPDATE_PENDING) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index ad158ea49901..bfc08f6320f8 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -187,13 +187,18 @@ u32 r100_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = ((u32)crtc_base) | RADEON_CRTC_OFFSET__OFFSET_LOCK; + int i; /* Lock the graphics update lock */ /* update the scanout addresses */ WREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset, tmp); /* Wait for update_pending to go high. */ - while (!(RREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset) & RADEON_CRTC_OFFSET__GUI_TRIG_OFFSET)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(RADEON_CRTC_OFFSET + radeon_crtc->crtc_offset) & RADEON_CRTC_OFFSET__GUI_TRIG_OFFSET) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 481b99e89f65..b1053d640423 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -62,6 +62,7 @@ u32 rs600_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset); + int i; /* Lock the graphics update lock */ tmp |= AVIVO_D1GRPH_UPDATE_LOCK; @@ -74,7 +75,11 @@ u32 rs600_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) (u32)crtc_base); /* Wait for update_pending to go high. */ - while (!(RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index a983f410ab89..23ae1c60ab3d 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -47,6 +47,7 @@ u32 rv770_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; u32 tmp = RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset); + int i; /* Lock the graphics update lock */ tmp |= AVIVO_D1GRPH_UPDATE_LOCK; @@ -66,7 +67,11 @@ u32 rv770_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) (u32)crtc_base); /* Wait for update_pending to go high. */ - while (!(RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING)); + for (i = 0; i < rdev->usec_timeout; i++) { + if (RREG32(AVIVO_D1GRPH_UPDATE + radeon_crtc->crtc_offset) & AVIVO_D1GRPH_SURFACE_UPDATE_PENDING) + break; + udelay(1); + } DRM_DEBUG("Update pending now high. Unlocking vupdate_lock.\n"); /* Unlock the lock, so double-buffering can take place inside vblank */ From bc96f9424b0e95f2451398007be46824f93866d0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 30 Nov 2011 17:26:36 +0100 Subject: [PATCH 151/364] drm/radeon/kms: Hide debugging message Use the proper macro to issue the debugging message in radeon_atif_call(). Otherwise we spam the log of many systems with a message which looks like an error message of unknown origin, and could thus confuse the user. Commit dc77de12dde95c8da39e4c417eb70c7d445cf84b was a first step in this direction, but was not sufficient IMHO. Signed-off-by: Jean Delvare Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_acpi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c index 3f6636bb2d7f..c039e5a6bf13 100644 --- a/drivers/gpu/drm/radeon/radeon_acpi.c +++ b/drivers/gpu/drm/radeon/radeon_acpi.c @@ -35,7 +35,8 @@ static int radeon_atif_call(acpi_handle handle) /* Fail only if calling the method fails and ATIF is supported */ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - printk(KERN_DEBUG "failed to evaluate ATIF got %s\n", acpi_format_exception(status)); + DRM_DEBUG_DRIVER("failed to evaluate ATIF got %s\n", + acpi_format_exception(status)); kfree(buffer.pointer); return 1; } From 48cc9b2c7dae377e39836c0a88dd1c5ba5566d17 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 30 Nov 2011 17:36:39 +0100 Subject: [PATCH 152/364] drm/radeon/kms: Skip ACPI call to ATIF when possible I am under the impression that it only makes sense to call the ATIF method if the graphics device has an ACPI handle attached. So we could skip the call altogether if there is no such handle. Signed-off-by: Jean Delvare Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_acpi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c index c039e5a6bf13..3516a6081dcf 100644 --- a/drivers/gpu/drm/radeon/radeon_acpi.c +++ b/drivers/gpu/drm/radeon/radeon_acpi.c @@ -51,13 +51,13 @@ int radeon_acpi_init(struct radeon_device *rdev) acpi_handle handle; int ret; - /* No need to proceed if we're sure that ATIF is not supported */ - if (!ASIC_IS_AVIVO(rdev) || !rdev->bios) - return 0; - /* Get the device handle */ handle = DEVICE_ACPI_HANDLE(&rdev->pdev->dev); + /* No need to proceed if we're sure that ATIF is not supported */ + if (!ASIC_IS_AVIVO(rdev) || !rdev->bios || !handle) + return 0; + /* Call the ATIF method */ ret = radeon_atif_call(handle); if (ret) From 88d686027bb43f585914c77dd363f6e817b42c2a Mon Sep 17 00:00:00 2001 From: Charles Chin Date: Thu, 1 Dec 2011 11:21:00 +0100 Subject: [PATCH 153/364] ALSA: hda - Fix S3/S4 problem on machines with VREF-pin mute-LED The verb command in stac92xx_post_suspend caused the audio to stop working after resuming from S3 mode on HP laptops with the VREF-pin mute-LED control. Removing relevant post_suspend registering. Although removing D3 on AFG is no optimal solution, the impact should be small in comparison with the broken S3/S4. Signed-off-by: Charles Chin Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index f4f4ebeed9ea..d8d2f9dccd9b 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5057,20 +5057,6 @@ static int stac92xx_pre_resume(struct hda_codec *codec) return 0; } -static int stac92xx_post_suspend(struct hda_codec *codec) -{ - struct sigmatel_spec *spec = codec->spec; - if (spec->gpio_led > 8) { - /* with vref-out pin used for mute led control - * codec AFG is prevented from D3 state, but on - * system suspend it can (and should) be used - */ - snd_hda_codec_read(codec, codec->afg, 0, - AC_VERB_SET_POWER_STATE, AC_PWRST_D3); - } - return 0; -} - static void stac92xx_set_power_state(struct hda_codec *codec, hda_nid_t fg, unsigned int power_state) { @@ -5670,8 +5656,6 @@ again: } else { codec->patch_ops.set_power_state = stac92xx_set_power_state; - codec->patch_ops.post_suspend = - stac92xx_post_suspend; } codec->patch_ops.pre_resume = stac92xx_pre_resume; codec->patch_ops.check_power_status = @@ -5985,8 +5969,6 @@ again: } else { codec->patch_ops.set_power_state = stac92xx_set_power_state; - codec->patch_ops.post_suspend = - stac92xx_post_suspend; } codec->patch_ops.pre_resume = stac92xx_pre_resume; codec->patch_ops.check_power_status = From 5f894cbb6890d317699aa622b4dc9d73d009cd22 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Thu, 1 Dec 2011 13:32:14 +0100 Subject: [PATCH 154/364] [S390] kdump: Replace is_kdump_kernel() with OLDMEM_BASE check In order to have the same behavior for kdump based stand-alone dump as for the kexec method, the is_kdump_kernel() check (only true for the kexec method) has to be replaced by the OLDMEM_BASE check (true for both methods). Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index e58a462949b1..e54c4ff8abaa 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -579,7 +579,7 @@ static unsigned long __init find_crash_base(unsigned long crash_size, *msg = "first memory chunk must be at least crashkernel size"; return 0; } - if (is_kdump_kernel() && (crash_size == OLDMEM_SIZE)) + if (OLDMEM_BASE && crash_size == OLDMEM_SIZE) return OLDMEM_BASE; for (i = MEMORY_CHUNKS - 1; i >= 0; i--) { From d9ae6772d3a3d7325d535577d9fd09c0de8a9da3 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 1 Dec 2011 13:32:15 +0100 Subject: [PATCH 155/364] [S390] ptrace inferior call interactions with TIF_SYSCALL The TIF_SYSCALL bit needs to be cleared if the debugger changes the state of the ptraced process in regard to the presence of a system call. Otherwise the system call will be restarted although the debugger set up an inferior call. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/signal.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 05a85bc14c98..7f6f9f354545 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -460,9 +460,9 @@ void do_signal(struct pt_regs *regs) regs->svc_code >> 16); break; } - /* No longer in a system call */ - clear_thread_flag(TIF_SYSCALL); } + /* No longer in a system call */ + clear_thread_flag(TIF_SYSCALL); if ((is_compat_task() ? handle_signal32(signr, &ka, &info, oldset, regs) : @@ -486,6 +486,7 @@ void do_signal(struct pt_regs *regs) } /* No handlers present - check for system call restart */ + clear_thread_flag(TIF_SYSCALL); if (current_thread_info()->system_call) { regs->svc_code = current_thread_info()->system_call; switch (regs->gprs[2]) { @@ -500,9 +501,6 @@ void do_signal(struct pt_regs *regs) regs->gprs[2] = regs->orig_gpr2; set_thread_flag(TIF_SYSCALL); break; - default: - clear_thread_flag(TIF_SYSCALL); - break; } } From 7c81878b34dd1b75dec5c8b68951d1439854d358 Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Thu, 1 Dec 2011 13:32:16 +0100 Subject: [PATCH 156/364] [S390] fix page change underindication in pgste_update_all This patch makes sure we don't underindicate _PAGE_CHANGED in case we have a race between an operation that changes the page and this code path that hits us between page_get_storage_key and page_set_storage_key. Note that we still have a potential underindication on _PAGE_REFERENCED in the unlikely event that the page was changed but not referenced _and_ someone references the page in the race window. That's not considered to be a problem. Signed-off-by: Carsten Otte Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/pgtable.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 524d23b8610c..4f289ff0b7fe 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -599,10 +599,10 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) skey = page_get_storage_key(address); bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED); /* Clear page changed & referenced bit in the storage key */ - if (bits) { - skey ^= bits; - page_set_storage_key(address, skey, 1); - } + if (bits & _PAGE_CHANGED) + page_set_storage_key(address, skey ^ bits, 1); + else if (bits) + page_reset_referenced(address); /* Transfer page changed & referenced bit to guest bits in pgste */ pgste_val(pgste) |= bits << 48; /* RCP_GR_BIT & RCP_GC_BIT */ /* Get host changed & referenced bits from pgste */ From b934069c991355d27a053a932591c77960f4e414 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 1 Dec 2011 13:32:17 +0100 Subject: [PATCH 157/364] [S390] add missing .set function for NT_S390_LAST_BREAK regset The last breaking event address is a read-only value, the regset misses the .set function. If a PTRACE_SETREGSET is done for NT_S390_LAST_BREAK we get an oops due to a branch to zero: Kernel BUG at 0000000000000002 verbose debug info unavailable illegal operation: 0001 #1 SMP ... Call Trace: (<0000000000158294> ptrace_regset+0x184/0x188) <00000000001595b6> ptrace_request+0x37a/0x4fc <0000000000109a78> arch_ptrace+0x108/0x1fc <00000000001590d6> SyS_ptrace+0xaa/0x12c <00000000005c7a42> sysc_noemu+0x16/0x1c <000003fffd5ec10c> 0x3fffd5ec10c Last Breaking-Event-Address: <0000000000158242> ptrace_regset+0x132/0x188 Add a nop .set function to prevent the branch to zero. Signed-off-by: Martin Schwidefsky Cc: stable@kernel.org --- arch/s390/kernel/ptrace.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 450931a45b68..f05649fd0547 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -905,6 +905,14 @@ static int s390_last_break_get(struct task_struct *target, return 0; } +static int s390_last_break_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + return 0; +} + #endif static int s390_system_call_get(struct task_struct *target, @@ -951,6 +959,7 @@ static const struct user_regset s390_regsets[] = { .size = sizeof(long), .align = sizeof(long), .get = s390_last_break_get, + .set = s390_last_break_set, }, #endif [REGSET_SYSTEM_CALL] = { @@ -1116,6 +1125,14 @@ static int s390_compat_last_break_get(struct task_struct *target, return 0; } +static int s390_compat_last_break_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + return 0; +} + static const struct user_regset s390_compat_regsets[] = { [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, @@ -1139,6 +1156,7 @@ static const struct user_regset s390_compat_regsets[] = { .size = sizeof(long), .align = sizeof(long), .get = s390_compat_last_break_get, + .set = s390_compat_last_break_set, }, [REGSET_SYSTEM_CALL] = { .core_note_type = NT_S390_SYSTEM_CALL, From cfc9066bcd3ab498268e1d075f1556bb5244c0aa Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 1 Dec 2011 13:32:18 +0100 Subject: [PATCH 158/364] [S390] remove reset of system call restart on psw changes git commit 20b40a794baf3b4b "signal race with restarting system calls" added code to the poke_user/poke_user_compat to reset the system call restart information in the thread-info if the PSW address is changed. The purpose of that change has been to workaround old gdbs that do not know about the REGSET_SYSTEM_CALL. It turned out that this is not a good idea, it makes the behaviour of the debuggee dependent on the order of specific ptrace call, e.g. the REGSET_SYSTEM_CALL register set needs to be written last. And the workaround does not really fix old gdbs, inferior calls on interrupted restarting system calls do not work either way. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ptrace.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index f05649fd0547..573bc29551ef 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -296,13 +296,6 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data) ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA)))) /* Invalid psw mask. */ return -EINVAL; - if (addr == (addr_t) &dummy->regs.psw.addr) - /* - * The debugger changed the instruction address, - * reset system call restart, see signal.c:do_signal - */ - task_thread_info(child)->system_call = 0; - *(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data; } else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) { @@ -614,11 +607,6 @@ static int __poke_user_compat(struct task_struct *child, /* Transfer 31 bit amode bit to psw mask. */ regs->psw.mask = (regs->psw.mask & ~PSW_MASK_BA) | (__u64)(tmp & PSW32_ADDR_AMODE); - /* - * The debugger changed the instruction address, - * reset system call restart, see signal.c:do_signal - */ - task_thread_info(child)->system_call = 0; } else { /* gpr 0-15 */ *(__u32*)((addr_t) ®s->psw + addr*2 + 4) = tmp; From 817e5000ebc4d448ca514db49b55073a724f8552 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:19 +0100 Subject: [PATCH 159/364] [S390] hibernate: directly trigger subchannel evaluation Using the generic css_schedule_eval to evaluate subchannels while resuming from hibernation is very slow when used with many devices. Provide a new evaluation trigger which exploits css_sched_sch_todo and use this in the resume callback for ccw devices. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.h | 5 ++ drivers/s390/cio/css.c | 104 +++++++++++++++++++++----------------- drivers/s390/cio/device.c | 4 +- 3 files changed, 66 insertions(+), 47 deletions(-) diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h index 155a82bcb9e5..4a1ff5c2eb88 100644 --- a/drivers/s390/cio/cio.h +++ b/drivers/s390/cio/cio.h @@ -68,8 +68,13 @@ struct schib { __u8 mda[4]; /* model dependent area */ } __attribute__ ((packed,aligned(4))); +/* + * When rescheduled, todo's with higher values will overwrite those + * with lower values. + */ enum sch_todo { SCH_TODO_NOTHING, + SCH_TODO_EVAL, SCH_TODO_UNREG, }; diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 92d7324acb1c..21908e67bf67 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -195,51 +195,6 @@ void css_sch_device_unregister(struct subchannel *sch) } EXPORT_SYMBOL_GPL(css_sch_device_unregister); -static void css_sch_todo(struct work_struct *work) -{ - struct subchannel *sch; - enum sch_todo todo; - - sch = container_of(work, struct subchannel, todo_work); - /* Find out todo. */ - spin_lock_irq(sch->lock); - todo = sch->todo; - CIO_MSG_EVENT(4, "sch_todo: sch=0.%x.%04x, todo=%d\n", sch->schid.ssid, - sch->schid.sch_no, todo); - sch->todo = SCH_TODO_NOTHING; - spin_unlock_irq(sch->lock); - /* Perform todo. */ - if (todo == SCH_TODO_UNREG) - css_sch_device_unregister(sch); - /* Release workqueue ref. */ - put_device(&sch->dev); -} - -/** - * css_sched_sch_todo - schedule a subchannel operation - * @sch: subchannel - * @todo: todo - * - * Schedule the operation identified by @todo to be performed on the slow path - * workqueue. Do nothing if another operation with higher priority is already - * scheduled. Needs to be called with subchannel lock held. - */ -void css_sched_sch_todo(struct subchannel *sch, enum sch_todo todo) -{ - CIO_MSG_EVENT(4, "sch_todo: sched sch=0.%x.%04x todo=%d\n", - sch->schid.ssid, sch->schid.sch_no, todo); - if (sch->todo >= todo) - return; - /* Get workqueue ref. */ - if (!get_device(&sch->dev)) - return; - sch->todo = todo; - if (!queue_work(cio_work_q, &sch->todo_work)) { - /* Already queued, release workqueue ref. */ - put_device(&sch->dev); - } -} - static void ssd_from_pmcw(struct chsc_ssd_info *ssd, struct pmcw *pmcw) { int i; @@ -466,6 +421,65 @@ static void css_evaluate_subchannel(struct subchannel_id schid, int slow) css_schedule_eval(schid); } +/** + * css_sched_sch_todo - schedule a subchannel operation + * @sch: subchannel + * @todo: todo + * + * Schedule the operation identified by @todo to be performed on the slow path + * workqueue. Do nothing if another operation with higher priority is already + * scheduled. Needs to be called with subchannel lock held. + */ +void css_sched_sch_todo(struct subchannel *sch, enum sch_todo todo) +{ + CIO_MSG_EVENT(4, "sch_todo: sched sch=0.%x.%04x todo=%d\n", + sch->schid.ssid, sch->schid.sch_no, todo); + if (sch->todo >= todo) + return; + /* Get workqueue ref. */ + if (!get_device(&sch->dev)) + return; + sch->todo = todo; + if (!queue_work(cio_work_q, &sch->todo_work)) { + /* Already queued, release workqueue ref. */ + put_device(&sch->dev); + } +} + +static void css_sch_todo(struct work_struct *work) +{ + struct subchannel *sch; + enum sch_todo todo; + int ret; + + sch = container_of(work, struct subchannel, todo_work); + /* Find out todo. */ + spin_lock_irq(sch->lock); + todo = sch->todo; + CIO_MSG_EVENT(4, "sch_todo: sch=0.%x.%04x, todo=%d\n", sch->schid.ssid, + sch->schid.sch_no, todo); + sch->todo = SCH_TODO_NOTHING; + spin_unlock_irq(sch->lock); + /* Perform todo. */ + switch (todo) { + case SCH_TODO_NOTHING: + break; + case SCH_TODO_EVAL: + ret = css_evaluate_known_subchannel(sch, 1); + if (ret == -EAGAIN) { + spin_lock_irq(sch->lock); + css_sched_sch_todo(sch, todo); + spin_unlock_irq(sch->lock); + } + break; + case SCH_TODO_UNREG: + css_sch_device_unregister(sch); + break; + } + /* Release workqueue ref. */ + put_device(&sch->dev); +} + static struct idset *slow_subchannel_set; static spinlock_t slow_subchannel_lock; static wait_queue_head_t css_eval_wq; diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index d734f4a0ecac..47269858ecb6 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1868,9 +1868,9 @@ static void __ccw_device_pm_restore(struct ccw_device *cdev) */ cdev->private->flags.resuming = 1; cdev->private->path_new_mask = LPM_ANYPATH; - css_schedule_eval(sch->schid); + css_sched_sch_todo(sch, SCH_TODO_EVAL); spin_unlock_irq(sch->lock); - css_complete_work(); + css_wait_for_slow_path(); /* cdev may have been moved to a different subchannel. */ sch = to_subchannel(cdev->dev.parent); From 659213b899f389d3a1e211796713ceaaa280fa44 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:20 +0100 Subject: [PATCH 160/364] [S390] cio: disallow driver io for known to be broken paths When a driver requests to do IO, we will adjust the mask of paths to be used to exclude varied offline paths. Drivers trying to do IO solely on paths which are online but some way defective may lack the information to do proper error handling. There is no reason to allow the usage of known to be broken paths. Thus restrict the paths a ccw driver can use for IO to a subset of the paths cio found usable (this also excludes offline paths). Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device_ops.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c index f98698d5735e..41c21ad0d5f2 100644 --- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -213,9 +213,9 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, ret = cio_set_options (sch, flags); if (ret) return ret; - /* Adjust requested path mask to excluded varied off paths. */ + /* Adjust requested path mask to exclude unusable paths. */ if (lpm) { - lpm &= sch->opm; + lpm &= sch->lpm; if (lpm == 0) return -EACCES; } @@ -607,9 +607,9 @@ int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw, return -EINVAL; if (cdev->private->state != DEV_STATE_ONLINE) return -EIO; - /* Adjust requested path mask to excluded varied off paths. */ + /* Adjust requested path mask to exclude unusable paths. */ if (lpm) { - lpm &= sch->opm; + lpm &= sch->lpm; if (lpm == 0) return -EACCES; } From 50c8e31f38f380f04885c66bde0bc4c946e786ee Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:21 +0100 Subject: [PATCH 161/364] [S390] cio: provide fake irb for transport mode IO If a driver wants to do command mode IO while CIO is doing online path verification we ignore this request and provide a fake irb when we are done and the driver can do IO again. For transport mode IO we have no such mechanism, giving the driver no other chance then to retry the action until we are done. This is not very reliable. Provide a fake irb for transport mode IO as well. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device_fsm.c | 30 ++++++++++++++++++++++-------- drivers/s390/cio/device_ops.c | 12 +++++++++++- drivers/s390/cio/io_sch.h | 5 ++++- 3 files changed, 37 insertions(+), 10 deletions(-) diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 52c233fa2b12..1b853513c891 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -496,8 +496,26 @@ static void ccw_device_reset_path_events(struct ccw_device *cdev) cdev->private->pgid_reset_mask = 0; } -void -ccw_device_verify_done(struct ccw_device *cdev, int err) +static void create_fake_irb(struct irb *irb, int type) +{ + memset(irb, 0, sizeof(*irb)); + if (type == FAKE_CMD_IRB) { + struct cmd_scsw *scsw = &irb->scsw.cmd; + scsw->cc = 1; + scsw->fctl = SCSW_FCTL_START_FUNC; + scsw->actl = SCSW_ACTL_START_PEND; + scsw->stctl = SCSW_STCTL_STATUS_PEND; + } else if (type == FAKE_TM_IRB) { + struct tm_scsw *scsw = &irb->scsw.tm; + scsw->x = 1; + scsw->cc = 1; + scsw->fctl = SCSW_FCTL_START_FUNC; + scsw->actl = SCSW_ACTL_START_PEND; + scsw->stctl = SCSW_STCTL_STATUS_PEND; + } +} + +void ccw_device_verify_done(struct ccw_device *cdev, int err) { struct subchannel *sch; @@ -520,12 +538,8 @@ callback: ccw_device_done(cdev, DEV_STATE_ONLINE); /* Deliver fake irb to device driver, if needed. */ if (cdev->private->flags.fake_irb) { - memset(&cdev->private->irb, 0, sizeof(struct irb)); - cdev->private->irb.scsw.cmd.cc = 1; - cdev->private->irb.scsw.cmd.fctl = SCSW_FCTL_START_FUNC; - cdev->private->irb.scsw.cmd.actl = SCSW_ACTL_START_PEND; - cdev->private->irb.scsw.cmd.stctl = - SCSW_STCTL_STATUS_PEND; + create_fake_irb(&cdev->private->irb, + cdev->private->flags.fake_irb); cdev->private->flags.fake_irb = 0; if (cdev->handler) cdev->handler(cdev, cdev->private->intparm, diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c index 41c21ad0d5f2..ec7fb6d3b479 100644 --- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -198,7 +198,7 @@ int ccw_device_start_key(struct ccw_device *cdev, struct ccw1 *cpa, if (cdev->private->state == DEV_STATE_VERIFY) { /* Remember to fake irb when finished. */ if (!cdev->private->flags.fake_irb) { - cdev->private->flags.fake_irb = 1; + cdev->private->flags.fake_irb = FAKE_CMD_IRB; cdev->private->intparm = intparm; return 0; } else @@ -605,6 +605,16 @@ int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw, sch = to_subchannel(cdev->dev.parent); if (!sch->schib.pmcw.ena) return -EINVAL; + if (cdev->private->state == DEV_STATE_VERIFY) { + /* Remember to fake irb when finished. */ + if (!cdev->private->flags.fake_irb) { + cdev->private->flags.fake_irb = FAKE_TM_IRB; + cdev->private->intparm = intparm; + return 0; + } else + /* There's already a fake I/O around. */ + return -EBUSY; + } if (cdev->private->state != DEV_STATE_ONLINE) return -EIO; /* Adjust requested path mask to exclude unusable paths. */ diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h index 2ebb492a5c17..76253dfcc1be 100644 --- a/drivers/s390/cio/io_sch.h +++ b/drivers/s390/cio/io_sch.h @@ -111,6 +111,9 @@ enum cdev_todo { CDEV_TODO_UNREG_EVAL, }; +#define FAKE_CMD_IRB 1 +#define FAKE_TM_IRB 2 + struct ccw_device_private { struct ccw_device *cdev; struct subchannel *sch; @@ -138,7 +141,7 @@ struct ccw_device_private { unsigned int doverify:1; /* delayed path verification */ unsigned int donotify:1; /* call notify function */ unsigned int recog_done:1; /* dev. recog. complete */ - unsigned int fake_irb:1; /* deliver faked irb */ + unsigned int fake_irb:2; /* deliver faked irb */ unsigned int resuming:1; /* recognition while resume */ unsigned int pgroup:1; /* pathgroup is set up */ unsigned int mpath:1; /* multipathing is set up */ From 3b484ec648490518dd16ed7d8f02206a39539a59 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 1 Dec 2011 13:32:22 +0100 Subject: [PATCH 162/364] [S390] cio: fix chsc_chp_vary The functions called by chsc_chp_vary operate on pointers to channel path ids not channel path links. (This worked by chance since the id is the first member of the link structure) Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chsc.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 75c3f1f8fd43..a84631a7391d 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -529,10 +529,7 @@ __s390_vary_chpid_on(struct subchannel_id schid, void *data) int chsc_chp_vary(struct chp_id chpid, int on) { struct channel_path *chp = chpid_to_chp(chpid); - struct chp_link link; - memset(&link, 0, sizeof(struct chp_link)); - link.chpid = chpid; /* Wait until previous actions have settled. */ css_wait_for_slow_path(); /* @@ -542,10 +539,10 @@ int chsc_chp_vary(struct chp_id chpid, int on) /* Try to update the channel path descritor. */ chsc_determine_base_channel_path_desc(chpid, &chp->desc); for_each_subchannel_staged(s390_subchannel_vary_chpid_on, - __s390_vary_chpid_on, &link); + __s390_vary_chpid_on, &chpid); } else for_each_subchannel_staged(s390_subchannel_vary_chpid_off, - NULL, &link); + NULL, &chpid); return 0; } From 75464960fc0ccc505527edc1459c8ad191fbc0cc Mon Sep 17 00:00:00 2001 From: Holger Dengler Date: Thu, 1 Dec 2011 13:32:23 +0100 Subject: [PATCH 163/364] [S390] ap: Setup timer for sending messages after reset. Setup timer for processing messages in request queue after a successful AP bus device reset. Signed-off-by: Holger Dengler Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index ec94f049e995..96bbe9d12a79 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1552,6 +1552,8 @@ static void ap_reset(struct ap_device *ap_dev) rc = ap_init_queue(ap_dev->qid); if (rc == -ENODEV) ap_dev->unregistered = 1; + else + __ap_schedule_poll_timer(); } static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags) From 03360c5a405999d605ffc7373a7b90f3388db92e Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 1 Dec 2011 10:44:17 -0500 Subject: [PATCH 164/364] Revert "mac80211: clear sta.drv_priv on reconfiguration" This reverts commit f785d83a19bca326f79d127a413e35769afc0105. This was provoking WARNINGs from the iwlegacy drivers. Signed-off-by: John W. Linville --- net/mac80211/util.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 0c9490722aa5..6719bce4a081 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1038,7 +1038,6 @@ int ieee80211_reconfig(struct ieee80211_local *local) struct ieee80211_sub_if_data, u.ap); - memset(&sta->sta.drv_priv, 0, hw->sta_data_size); WARN_ON(drv_sta_add(local, sdata, &sta->sta)); } } From 2ed4d9d648cbd4fb1c232a646dbdbdfdd373ca94 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 1 Dec 2011 11:02:11 -0500 Subject: [PATCH 165/364] drm/radeon/kms: add some new pci ids Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- include/drm/drm_pciids.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index f81676f1b310..4e4fbb820e20 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -197,6 +197,14 @@ {0x1002, 0x6770, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6842, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6843, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6849, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6858, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6859, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6888, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6889, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \ From 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Wed, 30 Nov 2011 16:37:41 +0800 Subject: [PATCH 166/364] xHCI: fix bug in xhci_clear_command_ring() When system enters suspend, xHCI driver clears command ring by writing zero to all the TRBs. However, this also writes zero to the Link TRB, and the ring is mangled. This may cause driver accesses wrong memory address and the result is unpredicted. When clear the command ring, keep the last Link TRB intact, only clear its cycle bit. This should fix the "command ring full" issue reported by Oliver Neukum. This should be backported to stable kernels as old as 2.6.37, since the commit 89821320 "xhci: Fix command ring replay after resume" is merged. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Reported-by: Oliver Neukum --- drivers/usb/host/xhci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index aa94c0195791..a1afb7c39f7e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -711,7 +711,10 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) ring = xhci->cmd_ring; seg = ring->deq_seg; do { - memset(seg->trbs, 0, SEGMENT_SIZE); + memset(seg->trbs, 0, + sizeof(union xhci_trb) * (TRBS_PER_SEGMENT - 1)); + seg->trbs[TRBS_PER_SEGMENT - 1].link.control &= + cpu_to_le32(~TRB_CYCLE); seg = seg->next; } while (seg != ring->deq_seg); From efbc368dcc6426d5430b9b8eeda944cf2cb74b8c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 1 Dec 2011 13:38:59 -0500 Subject: [PATCH 167/364] ipv4: Perform peer validation on cached route lookup. Otherwise we won't notice the peer GENID change. Reported-by: Steffen Klassert Signed-off-by: David S. Miller --- net/ipv4/route.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 57e01bc60947..ca5e237df029 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1693,12 +1693,8 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu) } -static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) +static struct rtable *ipv4_validate_peer(struct rtable *rt) { - struct rtable *rt = (struct rtable *) dst; - - if (rt_is_expired(rt)) - return NULL; if (rt->rt_peer_genid != rt_peer_genid()) { struct inet_peer *peer; @@ -1707,19 +1703,29 @@ static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) peer = rt->peer; if (peer) { - check_peer_pmtu(dst, peer); + check_peer_pmtu(&rt->dst, peer); if (peer->redirect_genid != redirect_genid) peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && peer->redirect_learned.a4 != rt->rt_gateway) { - if (check_peer_redir(dst, peer)) + if (check_peer_redir(&rt->dst, peer)) return NULL; } } rt->rt_peer_genid = rt_peer_genid(); } + return rt; +} + +static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) +{ + struct rtable *rt = (struct rtable *) dst; + + if (rt_is_expired(rt)) + return NULL; + dst = (struct dst_entry *) ipv4_validate_peer(rt); return dst; } @@ -2374,6 +2380,9 @@ int ip_route_input_common(struct sk_buff *skb, __be32 daddr, __be32 saddr, rth->rt_mark == skb->mark && net_eq(dev_net(rth->dst.dev), net) && !rt_is_expired(rth)) { + rth = ipv4_validate_peer(rth); + if (!rth) + continue; if (noref) { dst_use_noref(&rth->dst, jiffies); skb_dst_set_noref(skb, &rth->dst); @@ -2749,6 +2758,9 @@ struct rtable *__ip_route_output_key(struct net *net, struct flowi4 *flp4) (IPTOS_RT_MASK | RTO_ONLINK)) && net_eq(dev_net(rth->dst.dev), net) && !rt_is_expired(rth)) { + rth = ipv4_validate_peer(rth); + if (!rth) + continue; dst_use(&rth->dst, jiffies); RT_CACHE_STAT_INC(out_hit); rcu_read_unlock_bh(); From 0de13500ad1d8a66b7dc1e7fa517ea15a2625c9e Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 1 Dec 2011 10:30:16 -0800 Subject: [PATCH 168/364] Revert "xHCI: reset-on-resume quirk for NEC uPD720200" This reverts commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa. The commit added a reset-on-resume quirk because the NEC chipset stopped responding to commands about 30 minutes after a system resume from suspend. We thought it was a chipset issue, but it turns out that the xHCI driver was zeroing out the link TRB after a successful context restore during resume. The host controller would fall off the command ring sometime later, causing it to not respond to new commands. The link TRB issue has been fixed with commit 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 "xHCI: fix bug in xhci_clear_command_ring()", so revert the reset-on-resume quirk, as it's not necessary. Commit df711fc9962b9491af2b92bd0d21ecbfefe4e5fa was marked for stable trees back to 2.6.37, but according to my mail, it has not made it into Linus' tree or the stable trees yet. Signed-off-by: Sarah Sharp Tested-by: Julian Sikorski Cc: Andiry Xu --- drivers/usb/host/xhci-pci.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index d2a7332daca4..ef98b38626fb 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -33,8 +33,6 @@ #define PCI_VENDOR_ID_ETRON 0x1b6f #define PCI_DEVICE_ID_ASROCK_P67 0x7023 -#define PCI_DEVICE_ID_NEC_uPD720200 0x0194 - static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -76,11 +74,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->revision); } - if (pdev->vendor == PCI_VENDOR_ID_NEC) { + if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; - if (pdev->device == PCI_DEVICE_ID_NEC_uPD720200) - xhci->quirks |= XHCI_RESET_ON_RESUME; - } if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; From 307369b0ca06b27b511b61714e335ddfccf19c4f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marcin=20Ko=C5=9Bcielnicki?= Date: Wed, 30 Nov 2011 17:01:04 +0100 Subject: [PATCH 169/364] usb: ftdi_sio: add PID for Propox ISPcable III MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Marcin KoÅ›cielnicki Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index bd4298bb6750..ff3db5d056a5 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -736,6 +736,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 571fa96b49c7..055b64ef0bba 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -112,6 +112,7 @@ /* Propox devices */ #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 +#define FTDI_PROPOX_ISPCABLEIII_PID 0xD739 /* Lenz LI-USB Computer Interface. */ #define FTDI_LENZ_LIUSB_PID 0xD780 From b03b6dd58cef7d15b7c46a6729b83dd535ef08ab Mon Sep 17 00:00:00 2001 From: Vitalii Demianets Date: Fri, 25 Nov 2011 00:16:37 +0000 Subject: [PATCH 170/364] bridge: master device stuck in no-carrier state forever when in user-stp mode When in user-stp mode, bridge master do not follow state of its slaves, so after the following sequence of events it can stuck forever in no-carrier state: 1) turn stp off 2) put all slaves down - master device will follow their state and also go in no-carrier state 3) turn stp on with bridge-stp script returning 0 (go to the user-stp mode) Now bridge master won't follow slaves' state and will never reach running state. This patch solves the problem by making user-stp and kernel-stp behavior similar regarding master following slaves' states. Signed-off-by: Vitalii Demianets Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_netlink.c | 6 ++++++ net/bridge/br_stp.c | 29 ++++++++++++++--------------- 2 files changed, 20 insertions(+), 15 deletions(-) diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index e5f9ece3c9a0..a1daf8227ed1 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -18,6 +18,7 @@ #include #include "br_private.h" +#include "br_private_stp.h" static inline size_t br_nlmsg_size(void) { @@ -188,6 +189,11 @@ static int br_rtm_setlink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) p->state = new_state; br_log_state(p); + + spin_lock_bh(&p->br->lock); + br_port_state_selection(p->br); + spin_unlock_bh(&p->br->lock); + br_ifinfo_notify(RTM_NEWLINK, p); return 0; diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c index ad0a3f7cf6cc..dd147d78a588 100644 --- a/net/bridge/br_stp.c +++ b/net/bridge/br_stp.c @@ -399,25 +399,24 @@ void br_port_state_selection(struct net_bridge *br) struct net_bridge_port *p; unsigned int liveports = 0; - /* Don't change port states if userspace is handling STP */ - if (br->stp_enabled == BR_USER_STP) - return; - list_for_each_entry(p, &br->port_list, list) { if (p->state == BR_STATE_DISABLED) continue; - if (p->port_no == br->root_port) { - p->config_pending = 0; - p->topology_change_ack = 0; - br_make_forwarding(p); - } else if (br_is_designated_port(p)) { - del_timer(&p->message_age_timer); - br_make_forwarding(p); - } else { - p->config_pending = 0; - p->topology_change_ack = 0; - br_make_blocking(p); + /* Don't change port states if userspace is handling STP */ + if (br->stp_enabled != BR_USER_STP) { + if (p->port_no == br->root_port) { + p->config_pending = 0; + p->topology_change_ack = 0; + br_make_forwarding(p); + } else if (br_is_designated_port(p)) { + del_timer(&p->message_age_timer); + br_make_forwarding(p); + } else { + p->config_pending = 0; + p->topology_change_ack = 0; + br_make_blocking(p); + } } if (p->state == BR_STATE_FORWARDING) From 59c2cdae2791c0b2ee13d148edc6b771e7e7953f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 1 Dec 2011 14:12:55 -0500 Subject: [PATCH 171/364] Revert "udp: remove redundant variable" This reverts commit 81d54ec8479a2c695760da81f05b5a9fb2dbe40a. If we take the "try_again" goto, due to a checksum error, the 'len' has already been truncated. So we won't compute the same values as the original code did. Reported-by: paul bilke Signed-off-by: David S. Miller --- net/ipv4/udp.c | 15 ++++++++------- net/ipv6/udp.c | 15 ++++++++------- 2 files changed, 16 insertions(+), 14 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index ab0966df1e2a..5a65eeac1d29 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1164,7 +1164,7 @@ int udp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, struct inet_sock *inet = inet_sk(sk); struct sockaddr_in *sin = (struct sockaddr_in *)msg->msg_name; struct sk_buff *skb; - unsigned int ulen; + unsigned int ulen, copied; int peeked; int err; int is_udplite = IS_UDPLITE(sk); @@ -1186,9 +1186,10 @@ try_again: goto out; ulen = skb->len - sizeof(struct udphdr); - if (len > ulen) - len = ulen; - else if (len < ulen) + copied = len; + if (copied > ulen) + copied = ulen; + else if (copied < ulen) msg->msg_flags |= MSG_TRUNC; /* @@ -1197,14 +1198,14 @@ try_again: * coverage checksum (UDP-Lite), do it before the copy. */ - if (len < ulen || UDP_SKB_CB(skb)->partial_cov) { + if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) { if (udp_lib_checksum_complete(skb)) goto csum_copy_err; } if (skb_csum_unnecessary(skb)) err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr), - msg->msg_iov, len); + msg->msg_iov, copied); else { err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), @@ -1233,7 +1234,7 @@ try_again: if (inet->cmsg_flags) ip_cmsg_recv(msg, skb); - err = len; + err = copied; if (flags & MSG_TRUNC) err = ulen; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 846f4757eb8d..8c2541915183 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -340,7 +340,7 @@ int udpv6_recvmsg(struct kiocb *iocb, struct sock *sk, struct ipv6_pinfo *np = inet6_sk(sk); struct inet_sock *inet = inet_sk(sk); struct sk_buff *skb; - unsigned int ulen; + unsigned int ulen, copied; int peeked; int err; int is_udplite = IS_UDPLITE(sk); @@ -363,9 +363,10 @@ try_again: goto out; ulen = skb->len - sizeof(struct udphdr); - if (len > ulen) - len = ulen; - else if (len < ulen) + copied = len; + if (copied > ulen) + copied = ulen; + else if (copied < ulen) msg->msg_flags |= MSG_TRUNC; is_udp4 = (skb->protocol == htons(ETH_P_IP)); @@ -376,14 +377,14 @@ try_again: * coverage checksum (UDP-Lite), do it before the copy. */ - if (len < ulen || UDP_SKB_CB(skb)->partial_cov) { + if (copied < ulen || UDP_SKB_CB(skb)->partial_cov) { if (udp_lib_checksum_complete(skb)) goto csum_copy_err; } if (skb_csum_unnecessary(skb)) err = skb_copy_datagram_iovec(skb, sizeof(struct udphdr), - msg->msg_iov,len); + msg->msg_iov, copied ); else { err = skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr), msg->msg_iov); if (err == -EINVAL) @@ -432,7 +433,7 @@ try_again: datagram_recv_ctl(sk, msg, skb); } - err = len; + err = copied; if (flags & MSG_TRUNC) err = ulen; From b1f919664d04a8d0ba29cb76673c7ca3325a2006 Mon Sep 17 00:00:00 2001 From: "Yang Honggang (Joseph)" Date: Thu, 1 Dec 2011 22:22:41 -0500 Subject: [PATCH 172/364] clocksource: Fix bug with max_deferment margin calculation In order to leave a margin of 12.5% we should >> 3 not >> 5. CC: stable@kernel.org Signed-off-by: Yang Honggang (Joseph) [jstultz: Modified commit subject] Signed-off-by: John Stultz --- kernel/time/clocksource.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index cfc65e1eb9fb..da2f760e780c 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -548,7 +548,7 @@ static u64 clocksource_max_deferment(struct clocksource *cs) * note a margin of 12.5% is used because this can be computed with * a shift, versus say 10% which would require division. */ - return max_nsecs - (max_nsecs >> 5); + return max_nsecs - (max_nsecs >> 3); } #ifndef CONFIG_ARCH_USES_GETTIMEOFFSET @@ -669,7 +669,7 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq) * ~ 0.06ppm granularity for NTP. We apply the same 12.5% * margin as we do in clocksource_max_deferment() */ - sec = (cs->mask - (cs->mask >> 5)); + sec = (cs->mask - (cs->mask >> 3)); do_div(sec, freq); do_div(sec, scale); if (!sec) From 1ee5fa1e9970a16036e37c7b9d5ce81c778252fc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 1 Dec 2011 11:06:34 +0000 Subject: [PATCH 173/364] sch_red: fix red_change MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Le mercredi 30 novembre 2011 à 14:36 -0800, Stephen Hemminger a écrit : > (Almost) nobody uses RED because they can't figure it out. > According to Wikipedia, VJ says that: > "there are not one, but two bugs in classic RED." RED is useful for high throughput routers, I doubt many linux machines act as such devices. I was considering adding Adaptative RED (Sally Floyd, Ramakrishna Gummadi, Scott Shender), August 2001 In this version, maxp is dynamic (from 1% to 50%), and user only have to setup min_th (target average queue size) (max_th and wq (burst in linux RED) are automatically setup) By the way it seems we have a small bug in red_change() if (skb_queue_empty(&sch->q)) red_end_of_idle_period(&q->parms); First, if queue is empty, we should call red_start_of_idle_period(&q->parms); Second, since we dont use anymore sch->q, but q->qdisc, the test is meaningless. Oh well... [PATCH] sch_red: fix red_change() Now RED is classful, we must check q->qdisc->q.qlen, and if queue is empty, we start an idle period, not end it. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_red.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c index 6649463da1b6..d617161f8dd3 100644 --- a/net/sched/sch_red.c +++ b/net/sched/sch_red.c @@ -209,8 +209,8 @@ static int red_change(struct Qdisc *sch, struct nlattr *opt) ctl->Plog, ctl->Scell_log, nla_data(tb[TCA_RED_STAB])); - if (skb_queue_empty(&sch->q)) - red_end_of_idle_period(&q->parms); + if (!q->qdisc->q.qlen) + red_start_of_idle_period(&q->parms); sch_tree_unlock(sch); return 0; From 650f7a72b8cc235ffe4a0e3eff37954349026721 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 1 Dec 2011 17:47:06 -0800 Subject: [PATCH 174/364] ARM: OMAP1: Fix reprogramming of DPLL1 for systems that boot at rates below 60MHz Commit e9b7086b80c4d9e354f4edc9e280ae85a60df408 (ARM: OMAP: Fix reprogramming of dpll1 rate) fixed a regression for systems that did not rely on bootloader set rates. However, it also introduced a new problem where the rates selected in .config would not take affect as omap1_select_table_rate currently refuses to reprogram DPLL1 if it's already initialized. This was not a problem earlier, as the reprogramming was done earlier with ck_dpll1_p->rate uninitialized. Fix this by forcing the reprogramming on systems booting at rates below 60MHz. Note that the long term fix is to make the rates SoC specific later on. Thanks for Janusz Krzysztofik for figuring this one out. Reported-by: Janusz Krzysztofik Acked-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 1297bb58869c..3f305610efa0 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -930,6 +930,9 @@ void __init omap1_clk_late_init(void) if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) return; + /* System booting at unusable rate, force reprogramming of DPLL1 */ + ck_dpll1_p->rate = 0; + /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); From b29e23547ecb2a609777288cd81fc83b01f9f43f Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:30:39 +0100 Subject: [PATCH 175/364] ARM: OMAP1: Remove unsafe clock values from omap1_defconfig DPLL1 reprogramming to a different rate is actually blocked inside omap1_select_table_rate(), resulting in the defalut rate of 60 MHz always used instead of the one selected in .config. OTOH, in omap1_defconfig we currently rely on Kconfig options for the supported MHz rates in case of boards which boot with dpll1 not set correctly by their boot loaders. This means that before we allow for reprogramming of dpll1 rate, we should remove all unsafe clock selections from omap1_defconfig, otherwise it will stop booting on boards with imperfect boot loaders, as it would always try to change to 216MHz. Keep only one safe clock rate per each supported xtal frequency, i.e. 60MHZ dpll1 for 12MHz xtal and 182MHz dpll1 for 13MHz xtal. BTW, this change goes into the direction of removing all OMAP1 clock rate options, planned for next merge window. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/configs/omap1_defconfig | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index a7e777581378..945a34f2a34d 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,12 +48,7 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_ARM_216MHZ=y -CONFIG_OMAP_ARM_195MHZ=y -CONFIG_OMAP_ARM_192MHZ=y CONFIG_OMAP_ARM_182MHZ=y -CONFIG_OMAP_ARM_168MHZ=y -# CONFIG_OMAP_ARM_60MHZ is not set # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_OMAP_CF=y From c2cb211116192690605eaa70d39deb04241003e2 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:13:01 +0100 Subject: [PATCH 176/364] ARM: OMAP1: Fix ckctl value used for dpll1 defualt rate Use the exact value found in omap1_rate_table, otherwise I have been experiencing issues with correct timekeeping on my Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 3f305610efa0..86b2dec11788 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -937,7 +937,7 @@ void __init omap1_clk_late_init(void) if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL); ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; } propagate_rate(&ck_dpll1); From d01ff0a049f749e0bf10a35bb23edd012718c8c2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Peter=20Pan=28=E6=BD=98=E5=8D=AB=E5=B9=B3=29?= Date: Thu, 1 Dec 2011 15:47:06 +0000 Subject: [PATCH 177/364] ipv4: flush route cache after change accept_local After reset ipv4_devconf->data[IPV4_DEVCONF_ACCEPT_LOCAL] to 0, we should flush route cache, or it will continue receive packets with local source address, which should be dropped. Signed-off-by: Weiping Pan Signed-off-by: David S. Miller --- net/ipv4/devinet.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index c6b5092f29a1..65f01dc47565 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1490,7 +1490,9 @@ static int devinet_conf_proc(ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) { + int old_value = *(int *)ctl->data; int ret = proc_dointvec(ctl, write, buffer, lenp, ppos); + int new_value = *(int *)ctl->data; if (write) { struct ipv4_devconf *cnf = ctl->extra1; @@ -1501,6 +1503,9 @@ static int devinet_conf_proc(ctl_table *ctl, int write, if (cnf == net->ipv4.devconf_dflt) devinet_copy_dflt_conf(net, i); + if (i == IPV4_DEVCONF_ACCEPT_LOCAL - 1) + if ((new_value == 0) && (old_value != 0)) + rt_cache_flush(net, 0); } return ret; From 1bdfd27a0bd65ccdd7294c1080bdb59f6a5a6e72 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 17 Nov 2011 22:18:14 +0800 Subject: [PATCH 178/364] ARM: CSR: fix build error due to new mdesc->dma_zone_size commit 98b0124f0e2b88 "ARM: mach-prima2: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size" causes building error: arch/arm/mach-prima2/prima2.c:39:19: error: 'SZ_256M' undeclared here (not in a function) Signed-off-by: Barry Song --- arch/arm/mach-prima2/prima2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index ef555c041962..a12b689a8702 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include From b2dcb8723eb61d00c40d526702d08f6d805f5f01 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 17 Nov 2011 22:27:22 +0800 Subject: [PATCH 179/364] ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE' In the new kernel, we will get the following compile error: arch/arm/mach-prima2/pm.c:141: error: 'THIS_MODULE' undeclared here (not in a function) so include module.h head file explicitly Signed-off-by: Barry Song --- arch/arm/mach-prima2/pm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index cb53160f6c5d..26ebb57719df 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include From d3d9acf646679c1981032b0985b386d12fccc60c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 23 Nov 2011 08:49:49 -0800 Subject: [PATCH 180/364] trace_events_filter: Use rcu_assign_pointer() when setting ftrace_event_call->filter ftrace_event_call->filter is sched RCU protected but didn't use rcu_assign_pointer(). Use it. TODO: Add proper __rcu annotation to call->filter and all its users. -v2: Use RCU_INIT_POINTER() for %NULL clearing as suggested by Eric. Link: http://lkml.kernel.org/r/20111123164949.GA29639@google.com Cc: Eric Dumazet Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: stable@kernel.org # (2.6.39+) Signed-off-by: Tejun Heo Signed-off-by: Steven Rostedt --- kernel/trace/trace_events_filter.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index 816d3d074979..d6e7926dcd26 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -1686,7 +1686,7 @@ static int replace_system_preds(struct event_subsystem *system, * replace the filter for the call. */ filter = call->filter; - call->filter = filter_item->filter; + rcu_assign_pointer(call->filter, filter_item->filter); filter_item->filter = filter; fail = false; @@ -1741,7 +1741,7 @@ int apply_event_filter(struct ftrace_event_call *call, char *filter_string) filter = call->filter; if (!filter) goto out_unlock; - call->filter = NULL; + RCU_INIT_POINTER(call->filter, NULL); /* Make sure the filter is not being used */ synchronize_sched(); __free_filter(filter); @@ -1782,7 +1782,7 @@ out: * string */ tmp = call->filter; - call->filter = filter; + rcu_assign_pointer(call->filter, filter); if (tmp) { /* Make sure the call is done with the filter */ synchronize_sched(); From 3ced1be5490f5c415d51a1e5918beeb9239d546b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 1 Dec 2011 22:19:01 -0500 Subject: [PATCH 181/364] netfilter: Remove ADVANCED dependency from NF_CONNTRACK_NETBIOS_NS firewalld in Fedora 16 needs this. Signed-off-by: David S. Miller --- net/netfilter/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index e8f379692294..d5597b759ba3 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -201,7 +201,6 @@ config NF_CONNTRACK_BROADCAST config NF_CONNTRACK_NETBIOS_NS tristate "NetBIOS name service protocol support" - depends on NETFILTER_ADVANCED select NF_CONNTRACK_BROADCAST help NetBIOS name service requests are sent as broadcast messages from an From 769bbb634f30c1b76277623676011a77f31bcc20 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 2 Dec 2011 13:51:56 +0900 Subject: [PATCH 182/364] MAINTAINERS: Consolidate Samsung MAINTAINERS These days most Samsung stuff gets in the kernel through Kukjin Kim. This patch changes MAINTAINERS to reflect this. By adding Kukjin Kim to the maintainers for S3C2410, S3C244x and S3C64xx alongside Ben Dooks the extra entries become identical to the base ARM/SAMSUNG entry and can move into it. Also the S3C2416 gets a maintainer through the s3c24* wildcard - as it did not have one until now. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- MAINTAINERS | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 447560284996..1445a830b4f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1059,31 +1059,11 @@ S: Maintained F: arch/arm/plat-samsung/ F: arch/arm/plat-s3c24xx/ F: arch/arm/plat-s5p/ +F: arch/arm/mach-s3c24*/ +F: arch/arm/mach-s3c64xx/ F: drivers/*/*s3c2410* F: drivers/*/*/*s3c2410* -ARM/S3C2410 ARM ARCHITECTURE -M: Ben Dooks -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://www.fluff.org/ben/linux/ -S: Maintained -F: arch/arm/mach-s3c2410/ - -ARM/S3C244x ARM ARCHITECTURE -M: Ben Dooks -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://www.fluff.org/ben/linux/ -S: Maintained -F: arch/arm/mach-s3c2440/ -F: arch/arm/mach-s3c2443/ - -ARM/S3C64xx ARM ARCHITECTURE -M: Ben Dooks -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://www.fluff.org/ben/linux/ -S: Maintained -F: arch/arm/mach-s3c64xx/ - ARM/S5P EXYNOS ARM ARCHITECTURES M: Kukjin Kim L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) From 7a549d78e7d897651a4bc36ade7563c34cab9f8b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 13:52:12 +0900 Subject: [PATCH 183/364] MAINTAINERS: Add linux-samsung-soc mailing list for Samsung There's a Samsung-specific mailing list but it's not advertised in MAINTAINERS - add it to the overall architecture to make it more discoverable. Signed-off-by: Mark Brown [kgene.kim@samsung.com: added notice of 'moderated'] Signed-off-by: Kukjin Kim --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1445a830b4f8..523039045b36 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1054,6 +1054,7 @@ ARM/SAMSUNG ARM ARCHITECTURES M: Ben Dooks M: Kukjin Kim L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/plat-samsung/ From 40c76662a1ae7f88afa22ae3b1265497e4271f72 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 13:54:25 +0900 Subject: [PATCH 184/364] MAINTAINERS: Extend Samsung patterns to cover SPI and ASoC drivers Help people find the overall architecture. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 523039045b36..b4f18024f4e7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1064,6 +1064,8 @@ F: arch/arm/mach-s3c24*/ F: arch/arm/mach-s3c64xx/ F: drivers/*/*s3c2410* F: drivers/*/*/*s3c2410* +F: drivers/spi/spi-s3c* +F: sound/soc/samsung/* ARM/S5P EXYNOS ARM ARCHITECTURES M: Kukjin Kim From ade145cc4885fbdf47b3abd9cd6baf23b8367fef Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:17:36 +0900 Subject: [PATCH 185/364] ARM: S3C64XX: Remove extern from definition of framebuffer setup call The extern is only useful on prototypes. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/setup-fb-24bpp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 83d2afb79e9f..2cf80026c58d 100644 --- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c @@ -20,7 +20,7 @@ #include #include -extern void s3c64xx_fb_gpio_setup_24bpp(void) +void s3c64xx_fb_gpio_setup_24bpp(void) { s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2)); s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2)); From f4a65ad6eb9b56180724de52ddd6dd6712121be1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:17:54 +0900 Subject: [PATCH 186/364] ARM: S3C64XX: Add linux/export.h to dev-spi.c This is required for the EXPORT_SYMBOL()s the code uses, previously the header was being included implicitly by another header. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/dev-spi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 5e6b42089eb4..3341fd118723 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include From 71b33a4f7c864bf5fc893b5ca144770ad05f1d4a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:18:02 +0900 Subject: [PATCH 187/364] ARM: S3C64XX: Staticise s3c6400_sysclass The symbol is not exported and doesn't need to be. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/s3c6400.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 7a3bc32df425..51c00f2453c6 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -70,7 +70,7 @@ void __init s3c6400_init_irq(void) s3c64xx_init_irq(~0 & ~(0xf << 5), ~0); } -struct sysdev_class s3c6400_sysclass = { +static struct sysdev_class s3c6400_sysclass = { .name = "s3c6400-core", }; From 5d348401ed03450395ce674594c1c08c7d85bd8d Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Sat, 12 Nov 2011 00:09:05 +0800 Subject: [PATCH 188/364] ARM: mxs/tx28: add __initconst for fec pdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Dong Aisheng Acked-by: Lothar Waßmann Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/module-tx28.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index 0fcff47009cf..9a7b08b2a925 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = { MX28_PAD_ENET0_CRS__ENET1_RX_EN, }; -static struct fec_platform_data tx28_fec0_data = { +static const struct fec_platform_data tx28_fec0_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -static struct fec_platform_data tx28_fec1_data = { +static const struct fec_platform_data tx28_fec1_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; From 8d2d2d1d7e96f12d9fe140169fb39ef9fd27b7c1 Mon Sep 17 00:00:00 2001 From: Lauri Hintsala Date: Mon, 21 Nov 2011 10:55:55 +0200 Subject: [PATCH 189/364] ARM: mxs: fix machines' initializers order Initializers of m28evk and stmp378x_devb fixed to be in order they are called. reference: http://article.gmane.org/gmane.linux.ports.arm.omap/50721 Cc: Shawn Guo Signed-off-by: Lauri Hintsala Acked-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-m28evk.c | 2 +- arch/arm/mach-mxs/mach-stmp378x_devb.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 3b1681e4f49a..6b00577b7025 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -361,6 +361,6 @@ static struct sys_timer m28evk_timer = { MACHINE_START(M28EVK, "DENX M28 EVK") .map_io = mx28_map_io, .init_irq = mx28_init_irq, - .init_machine = m28evk_init, .timer = &m28evk_timer, + .init_machine = m28evk_init, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c index 177e53123a02..6834dea38c04 100644 --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c +++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c @@ -115,6 +115,6 @@ static struct sys_timer stmp378x_dvb_timer = { MACHINE_START(STMP378X, "STMP378X") .map_io = mx23_map_io, .init_irq = mx23_init_irq, - .init_machine = stmp378x_dvb_init, .timer = &stmp378x_dvb_timer, + .init_machine = stmp378x_dvb_init, MACHINE_END From 11357be9246c7d1acf9b37ad54a18b29bbb734be Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 26 Nov 2011 11:39:14 +0100 Subject: [PATCH 190/364] arm: mx23: recognise stmp378x as mx23 Adding the machine_is_* line was forgotten when converting mach-stmp378x to mach-mxs. Signed-off-by: Wolfram Sang Signed-off-by: Shawn Guo Cc: stable@kernel.org --- arch/arm/mach-mxs/include/mach/mxs.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index 0d2d2b470998..bde5f6634747 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -30,6 +30,7 @@ */ #define cpu_is_mx23() ( \ machine_is_mx23evk() || \ + machine_is_stmp378x() || \ 0) #define cpu_is_mx28() ( \ machine_is_mx28evk() || \ From 7d8b894ca135a896f32934f7d096714d5bc687e6 Mon Sep 17 00:00:00 2001 From: Peter Rusko Date: Wed, 30 Nov 2011 16:43:27 +0100 Subject: [PATCH 191/364] ARM: mx28: LRADC macro rename It's a correction of two macro names, renaming them from IRADC to LRADC. Signed-off-by: Peter Rusko Acked-by: Wolfram Sang Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/include/mach/mx28.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h index 75d86118b76a..30c7990f3c01 100644 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ b/arch/arm/mach-mxs/include/mach/mx28.h @@ -104,8 +104,8 @@ #define MX28_INT_CAN1 9 #define MX28_INT_LRADC_TOUCH 10 #define MX28_INT_HSADC 13 -#define MX28_INT_IRADC_THRESH0 14 -#define MX28_INT_IRADC_THRESH1 15 +#define MX28_INT_LRADC_THRESH0 14 +#define MX28_INT_LRADC_THRESH1 15 #define MX28_INT_LRADC_CH0 16 #define MX28_INT_LRADC_CH1 17 #define MX28_INT_LRADC_CH2 18 From fc084e0b930d546872ab23667052499f7daf0fed Mon Sep 17 00:00:00 2001 From: David Dillow Date: Thu, 1 Dec 2011 23:26:53 -0500 Subject: [PATCH 192/364] ALSA: sis7019 - give slow codecs more time to reset There are some AC97 codec and board combinations that have been observed to take a very long time to respond after the cold reset has completed. In one case, more than 350 ms was required. To allow users to have sound on those platforms, we'll wait up to 500ms for the codec to become ready. As a board may have multiple codecs, with some faster than others to reset, we add a module parameter to inform the driver which codecs should be present. Reported-by: KotCzarny Signed-off-by: David Dillow Cc: Signed-off-by: Takashi Iwai --- sound/pci/sis7019.c | 66 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 54 insertions(+), 12 deletions(-) diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c index a391e622a192..28dfafb56dd1 100644 --- a/sound/pci/sis7019.c +++ b/sound/pci/sis7019.c @@ -41,6 +41,7 @@ MODULE_SUPPORTED_DEVICE("{{SiS,SiS7019 Audio Accelerator}}"); static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */ static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */ static int enable = 1; +static int codecs = 1; module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for SiS7019 Audio Accelerator."); @@ -48,6 +49,8 @@ module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for SiS7019 Audio Accelerator."); module_param(enable, bool, 0444); MODULE_PARM_DESC(enable, "Enable SiS7019 Audio Accelerator."); +module_param(codecs, int, 0444); +MODULE_PARM_DESC(codecs, "Set bit to indicate that codec number is expected to be present (default 1)"); static DEFINE_PCI_DEVICE_TABLE(snd_sis7019_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x7019) }, @@ -140,6 +143,9 @@ struct sis7019 { dma_addr_t silence_dma_addr; }; +/* These values are also used by the module param 'codecs' to indicate + * which codecs should be present. + */ #define SIS_PRIMARY_CODEC_PRESENT 0x0001 #define SIS_SECONDARY_CODEC_PRESENT 0x0002 #define SIS_TERTIARY_CODEC_PRESENT 0x0004 @@ -1078,6 +1084,7 @@ static int sis_chip_init(struct sis7019 *sis) { unsigned long io = sis->ioport; void __iomem *ioaddr = sis->ioaddr; + unsigned long timeout; u16 status; int count; int i; @@ -1104,22 +1111,46 @@ static int sis_chip_init(struct sis7019 *sis) while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count) udelay(1); - /* Now that we've finished the reset, find out what's attached. - */ - status = inl(io + SIS_AC97_STATUS); - if (status & SIS_AC97_STATUS_CODEC_READY) - sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT; - if (status & SIS_AC97_STATUS_CODEC2_READY) - sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT; - if (status & SIS_AC97_STATUS_CODEC3_READY) - sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT; - - /* All done, let go of the semaphore, and check for errors + /* Command complete, we can let go of the semaphore now. */ outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA); - if (!sis->codecs_present || !count) + if (!count) return -EIO; + /* Now that we've finished the reset, find out what's attached. + * There are some codec/board combinations that take an extremely + * long time to come up. 350+ ms has been observed in the field, + * so we'll give them up to 500ms. + */ + sis->codecs_present = 0; + timeout = msecs_to_jiffies(500) + jiffies; + while (time_before_eq(jiffies, timeout)) { + status = inl(io + SIS_AC97_STATUS); + if (status & SIS_AC97_STATUS_CODEC_READY) + sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT; + if (status & SIS_AC97_STATUS_CODEC2_READY) + sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT; + if (status & SIS_AC97_STATUS_CODEC3_READY) + sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT; + + if (sis->codecs_present == codecs) + break; + + msleep(1); + } + + /* All done, check for errors. + */ + if (!sis->codecs_present) { + printk(KERN_ERR "sis7019: could not find any codecs\n"); + return -EIO; + } + + if (sis->codecs_present != codecs) { + printk(KERN_WARNING "sis7019: missing codecs, found %0x, expected %0x\n", + sis->codecs_present, codecs); + } + /* Let the hardware know that the audio driver is alive, * and enable PCM slots on the AC-link for L/R playback (3 & 4) and * record channels. We're going to want to use Variable Rate Audio @@ -1390,6 +1421,17 @@ static int __devinit snd_sis7019_probe(struct pci_dev *pci, if (!enable) goto error_out; + /* The user can specify which codecs should be present so that we + * can wait for them to show up if they are slow to recover from + * the AC97 cold reset. We default to a single codec, the primary. + * + * We assume that SIS_PRIMARY_*_PRESENT matches bits 0-2. + */ + codecs &= SIS_PRIMARY_CODEC_PRESENT | SIS_SECONDARY_CODEC_PRESENT | + SIS_TERTIARY_CODEC_PRESENT; + if (!codecs) + codecs = SIS_PRIMARY_CODEC_PRESENT; + rc = snd_card_create(index, id, THIS_MODULE, sizeof(*sis), &card); if (rc < 0) goto error_out; From 6eebd6bb5f1ea04f04019e5c39f87a0f17ffb472 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 28 Nov 2011 21:10:05 +0000 Subject: [PATCH 193/364] drm: Fix lack of CRTC disable for drm_crtc_helper_set_config(.fb=NULL) Disabling the CRTC by setting its framebuffer to NULL, as used by drm_framebuffer_cleanup(), was failing to pass the current framebuffer to the crtc_func->disable callback. This is because of the dance within drm_crtc_helper_set_config to pass the new_fb (NULL in this case) to the drm_crtc_helper_set_mode with the currently attached fb as a parameter. drm_crtc_helper_set_mode treats this as a no-op and the encoder is still enabled. And so the current fb is forgotten before the call to drm_helper_disable_unused_functions. This patch treats disabling the CRTC as a simple special case rather than adding further complexity into the configuration logic. This fixes a pin-leak of the fb bo on Xserver close. Signed-off-by: Chris Wilson Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 3969f7553fe7..d2619d72cece 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -456,6 +456,30 @@ done: EXPORT_SYMBOL(drm_crtc_helper_set_mode); +static int +drm_crtc_helper_disable(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_connector *connector; + struct drm_encoder *encoder; + + /* Decouple all encoders and their attached connectors from this crtc */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->crtc != crtc) + continue; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (connector->encoder != encoder) + continue; + + connector->encoder = NULL; + } + } + + drm_helper_disable_unused_functions(dev); + return 0; +} + /** * drm_crtc_helper_set_config - set a new config from userspace * @crtc: CRTC to setup @@ -510,8 +534,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) (int)set->num_connectors, set->x, set->y); } else { DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id); - set->mode = NULL; - set->num_connectors = 0; + return drm_crtc_helper_disable(set->crtc); } dev = set->crtc->dev; From 392e37229f0d6358dcc7b43641df776e9f62a6e6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 28 Nov 2011 14:49:27 -0500 Subject: [PATCH 194/364] drm/radeon/kms: fix scanout of 2D tiled buffers on EG/CM Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 35 ++++++++++++++++++++++++-- drivers/gpu/drm/radeon/evergreen_reg.h | 29 +++++++++++++++++++++ 2 files changed, 62 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 87631fede1f8..2b97262e3ab1 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1107,9 +1107,40 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc, return -EINVAL; } - if (tiling_flags & RADEON_TILING_MACRO) + if (tiling_flags & RADEON_TILING_MACRO) { + if (rdev->family >= CHIP_CAYMAN) + tmp = rdev->config.cayman.tile_config; + else + tmp = rdev->config.evergreen.tile_config; + + switch ((tmp & 0xf0) >> 4) { + case 0: /* 4 banks */ + fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_4_BANK); + break; + case 1: /* 8 banks */ + default: + fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_8_BANK); + break; + case 2: /* 16 banks */ + fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_16_BANK); + break; + } + + switch ((tmp & 0xf000) >> 12) { + case 0: /* 1KB rows */ + default: + fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_1KB); + break; + case 1: /* 2KB rows */ + fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_2KB); + break; + case 2: /* 4KB rows */ + fb_format |= EVERGREEN_GRPH_TILE_SPLIT(EVERGREEN_ADDR_SURF_TILE_SPLIT_4KB); + break; + } + fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_2D_TILED_THIN1); - else if (tiling_flags & RADEON_TILING_MICRO) + } else if (tiling_flags & RADEON_TILING_MICRO) fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1); switch (radeon_crtc->crtc_id) { diff --git a/drivers/gpu/drm/radeon/evergreen_reg.h b/drivers/gpu/drm/radeon/evergreen_reg.h index c781c92c3451..7d7f2155e34c 100644 --- a/drivers/gpu/drm/radeon/evergreen_reg.h +++ b/drivers/gpu/drm/radeon/evergreen_reg.h @@ -42,6 +42,17 @@ # define EVERGREEN_GRPH_DEPTH_8BPP 0 # define EVERGREEN_GRPH_DEPTH_16BPP 1 # define EVERGREEN_GRPH_DEPTH_32BPP 2 +# define EVERGREEN_GRPH_NUM_BANKS(x) (((x) & 0x3) << 2) +# define EVERGREEN_ADDR_SURF_2_BANK 0 +# define EVERGREEN_ADDR_SURF_4_BANK 1 +# define EVERGREEN_ADDR_SURF_8_BANK 2 +# define EVERGREEN_ADDR_SURF_16_BANK 3 +# define EVERGREEN_GRPH_Z(x) (((x) & 0x3) << 4) +# define EVERGREEN_GRPH_BANK_WIDTH(x) (((x) & 0x3) << 6) +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_1 0 +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_2 1 +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_4 2 +# define EVERGREEN_ADDR_SURF_BANK_WIDTH_8 3 # define EVERGREEN_GRPH_FORMAT(x) (((x) & 0x7) << 8) /* 8 BPP */ # define EVERGREEN_GRPH_FORMAT_INDEXED 0 @@ -61,6 +72,24 @@ # define EVERGREEN_GRPH_FORMAT_8B_BGRA1010102 5 # define EVERGREEN_GRPH_FORMAT_RGB111110 6 # define EVERGREEN_GRPH_FORMAT_BGR101111 7 +# define EVERGREEN_GRPH_BANK_HEIGHT(x) (((x) & 0x3) << 11) +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_1 0 +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_2 1 +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_4 2 +# define EVERGREEN_ADDR_SURF_BANK_HEIGHT_8 3 +# define EVERGREEN_GRPH_TILE_SPLIT(x) (((x) & 0x7) << 13) +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_64B 0 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_128B 1 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_256B 2 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_512B 3 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_1KB 4 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_2KB 5 +# define EVERGREEN_ADDR_SURF_TILE_SPLIT_4KB 6 +# define EVERGREEN_GRPH_MACRO_TILE_ASPECT(x) (((x) & 0x3) << 18) +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_1 0 +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_2 1 +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_4 2 +# define EVERGREEN_ADDR_SURF_MACRO_TILE_ASPECT_8 3 # define EVERGREEN_GRPH_ARRAY_MODE(x) (((x) & 0x7) << 20) # define EVERGREEN_GRPH_ARRAY_LINEAR_GENERAL 0 # define EVERGREEN_GRPH_ARRAY_LINEAR_ALIGNED 1 From f3a71df05082c84d1408129084736c5f742a6165 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 28 Nov 2011 14:49:28 -0500 Subject: [PATCH 195/364] drm/radeon/kms: fix 2D tiling CS support on EG/CM Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen_cs.c | 149 +++++++++++++++++++++----- drivers/gpu/drm/radeon/evergreend.h | 31 ++++++ 2 files changed, 154 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 38e1bda73d33..cd4590aae154 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -38,6 +38,7 @@ struct evergreen_cs_track { u32 group_size; u32 nbanks; u32 npipes; + u32 row_size; /* value we track */ u32 nsamples; u32 cb_color_base_last[12]; @@ -77,6 +78,44 @@ struct evergreen_cs_track { struct radeon_bo *db_s_write_bo; }; +static u32 evergreen_cs_get_aray_mode(u32 tiling_flags) +{ + if (tiling_flags & RADEON_TILING_MACRO) + return ARRAY_2D_TILED_THIN1; + else if (tiling_flags & RADEON_TILING_MICRO) + return ARRAY_1D_TILED_THIN1; + else + return ARRAY_LINEAR_GENERAL; +} + +static u32 evergreen_cs_get_num_banks(u32 nbanks) +{ + switch (nbanks) { + case 2: + return ADDR_SURF_2_BANK; + case 4: + return ADDR_SURF_4_BANK; + case 8: + default: + return ADDR_SURF_8_BANK; + case 16: + return ADDR_SURF_16_BANK; + } +} + +static u32 evergreen_cs_get_tile_split(u32 row_size) +{ + switch (row_size) { + case 1: + default: + return ADDR_SURF_TILE_SPLIT_1KB; + case 2: + return ADDR_SURF_TILE_SPLIT_2KB; + case 4: + return ADDR_SURF_TILE_SPLIT_4KB; + } +} + static void evergreen_cs_track_init(struct evergreen_cs_track *track) { int i; @@ -490,12 +529,11 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) } ib[idx] &= ~Z_ARRAY_MODE(0xf); track->db_z_info &= ~Z_ARRAY_MODE(0xf); + ib[idx] |= Z_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + track->db_z_info |= Z_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else { - ib[idx] |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->db_z_info |= Z_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + ib[idx] |= DB_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks)); + ib[idx] |= DB_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size)); } } break; @@ -618,13 +656,8 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) "0x%04X\n", reg); return -EINVAL; } - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - } + ib[idx] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); } break; case CB_COLOR8_INFO: @@ -640,13 +673,8 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) "0x%04X\n", reg); return -EINVAL; } - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - } else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) { - ib[idx] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - track->cb_color_info[tmp] |= CB_ARRAY_MODE(ARRAY_1D_TILED_THIN1); - } + ib[idx] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + track->cb_color_info[tmp] |= CB_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); } break; case CB_COLOR0_PITCH: @@ -701,6 +729,16 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) case CB_COLOR9_ATTRIB: case CB_COLOR10_ATTRIB: case CB_COLOR11_ATTRIB: + r = evergreen_cs_packet_next_reloc(p, &reloc); + if (r) { + dev_warn(p->dev, "bad SET_CONTEXT_REG " + "0x%04X\n", reg); + return -EINVAL; + } + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx] |= CB_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks)); + ib[idx] |= CB_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size)); + } break; case CB_COLOR0_DIM: case CB_COLOR1_DIM: @@ -1318,10 +1356,14 @@ static int evergreen_packet3_check(struct radeon_cs_parser *p, } ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); if (!p->keep_tiling_flags) { - if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1); - else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) - ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_1D_TILED_THIN1); + ib[idx+1+(i*8)+1] |= + TEX_ARRAY_MODE(evergreen_cs_get_aray_mode(reloc->lobj.tiling_flags)); + if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) { + ib[idx+1+(i*8)+6] |= + TEX_TILE_SPLIT(evergreen_cs_get_tile_split(track->row_size)); + ib[idx+1+(i*8)+7] |= + TEX_NUM_BANKS(evergreen_cs_get_num_banks(track->nbanks)); + } } texture = reloc->robj; /* tex mip base */ @@ -1422,6 +1464,7 @@ int evergreen_cs_parse(struct radeon_cs_parser *p) { struct radeon_cs_packet pkt; struct evergreen_cs_track *track; + u32 tmp; int r; if (p->track == NULL) { @@ -1430,9 +1473,63 @@ int evergreen_cs_parse(struct radeon_cs_parser *p) if (track == NULL) return -ENOMEM; evergreen_cs_track_init(track); - track->npipes = p->rdev->config.evergreen.tiling_npipes; - track->nbanks = p->rdev->config.evergreen.tiling_nbanks; - track->group_size = p->rdev->config.evergreen.tiling_group_size; + if (p->rdev->family >= CHIP_CAYMAN) + tmp = p->rdev->config.cayman.tile_config; + else + tmp = p->rdev->config.evergreen.tile_config; + + switch (tmp & 0xf) { + case 0: + track->npipes = 1; + break; + case 1: + default: + track->npipes = 2; + break; + case 2: + track->npipes = 4; + break; + case 3: + track->npipes = 8; + break; + } + + switch ((tmp & 0xf0) >> 4) { + case 0: + track->nbanks = 4; + break; + case 1: + default: + track->nbanks = 8; + break; + case 2: + track->nbanks = 16; + break; + } + + switch ((tmp & 0xf00) >> 8) { + case 0: + track->group_size = 256; + break; + case 1: + default: + track->group_size = 512; + break; + } + + switch ((tmp & 0xf000) >> 12) { + case 0: + track->row_size = 1; + break; + case 1: + default: + track->row_size = 2; + break; + case 2: + track->row_size = 4; + break; + } + p->track = track; } do { diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index b937c49054d9..e00039e59a75 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -899,6 +899,10 @@ #define DB_HTILE_DATA_BASE 0x28014 #define DB_Z_INFO 0x28040 # define Z_ARRAY_MODE(x) ((x) << 4) +# define DB_TILE_SPLIT(x) (((x) & 0x7) << 8) +# define DB_NUM_BANKS(x) (((x) & 0x3) << 12) +# define DB_BANK_WIDTH(x) (((x) & 0x3) << 16) +# define DB_BANK_HEIGHT(x) (((x) & 0x3) << 20) #define DB_STENCIL_INFO 0x28044 #define DB_Z_READ_BASE 0x28048 #define DB_STENCIL_READ_BASE 0x2804c @@ -951,6 +955,29 @@ # define CB_SF_EXPORT_FULL 0 # define CB_SF_EXPORT_NORM 1 #define CB_COLOR0_ATTRIB 0x28c74 +# define CB_TILE_SPLIT(x) (((x) & 0x7) << 5) +# define ADDR_SURF_TILE_SPLIT_64B 0 +# define ADDR_SURF_TILE_SPLIT_128B 1 +# define ADDR_SURF_TILE_SPLIT_256B 2 +# define ADDR_SURF_TILE_SPLIT_512B 3 +# define ADDR_SURF_TILE_SPLIT_1KB 4 +# define ADDR_SURF_TILE_SPLIT_2KB 5 +# define ADDR_SURF_TILE_SPLIT_4KB 6 +# define CB_NUM_BANKS(x) (((x) & 0x3) << 10) +# define ADDR_SURF_2_BANK 0 +# define ADDR_SURF_4_BANK 1 +# define ADDR_SURF_8_BANK 2 +# define ADDR_SURF_16_BANK 3 +# define CB_BANK_WIDTH(x) (((x) & 0x3) << 13) +# define ADDR_SURF_BANK_WIDTH_1 0 +# define ADDR_SURF_BANK_WIDTH_2 1 +# define ADDR_SURF_BANK_WIDTH_4 2 +# define ADDR_SURF_BANK_WIDTH_8 3 +# define CB_BANK_HEIGHT(x) (((x) & 0x3) << 16) +# define ADDR_SURF_BANK_HEIGHT_1 0 +# define ADDR_SURF_BANK_HEIGHT_2 1 +# define ADDR_SURF_BANK_HEIGHT_4 2 +# define ADDR_SURF_BANK_HEIGHT_8 3 #define CB_COLOR0_DIM 0x28c78 /* only CB0-7 blocks have these regs */ #define CB_COLOR0_CMASK 0x28c7c @@ -1137,7 +1164,11 @@ # define SQ_SEL_1 5 #define SQ_TEX_RESOURCE_WORD5_0 0x30014 #define SQ_TEX_RESOURCE_WORD6_0 0x30018 +# define TEX_TILE_SPLIT(x) (((x) & 0x7) << 29) #define SQ_TEX_RESOURCE_WORD7_0 0x3001c +# define TEX_BANK_WIDTH(x) (((x) & 0x3) << 8) +# define TEX_BANK_HEIGHT(x) (((x) & 0x3) << 10) +# define TEX_NUM_BANKS(x) (((x) & 0x3) << 16) #define SQ_VTX_CONSTANT_WORD0_0 0x30000 #define SQ_VTX_CONSTANT_WORD1_0 0x30004 From bab9efc206ba89766c53a9042eb771e87e68c42b Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 28 Nov 2011 12:25:43 +0100 Subject: [PATCH 196/364] vmwgfx: integer overflow in vmw_kms_update_layout_ioctl() There are two issues in vmw_kms_update_layout_ioctl(). First, the for loop forgets to index rects and only checks the first element. Second, there is a potential integer overflow if userspace passes in a large arg->num_outputs. The call to kzalloc() would allocate a small buffer, leading to out-of-bounds read. Reported-by: Haogang Chen Signed-off-by: Xi Wang Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 880e285d7578..37d40545ed77 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1809,7 +1809,8 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, } rects_size = arg->num_outputs * sizeof(struct drm_vmw_rect); - rects = kzalloc(rects_size, GFP_KERNEL); + rects = kcalloc(arg->num_outputs, sizeof(struct drm_vmw_rect), + GFP_KERNEL); if (unlikely(!rects)) { ret = -ENOMEM; goto out_unlock; @@ -1824,10 +1825,10 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, } for (i = 0; i < arg->num_outputs; ++i) { - if (rects->x < 0 || - rects->y < 0 || - rects->x + rects->w > mode_config->max_width || - rects->y + rects->h > mode_config->max_height) { + if (rects[i].x < 0 || + rects[i].y < 0 || + rects[i].x + rects[i].w > mode_config->max_width || + rects[i].y + rects[i].h > mode_config->max_height) { DRM_ERROR("Invalid GUI layout.\n"); ret = -EINVAL; goto out_free; From 550acb19269d65f32e9ac4ddb26c2b2070e37f1c Mon Sep 17 00:00:00 2001 From: Ido Yariv Date: Thu, 1 Dec 2011 13:55:08 +0200 Subject: [PATCH 197/364] genirq: Fix race condition when stopping the irq thread In irq_wait_for_interrupt(), the should_stop member is verified before setting the task's state to TASK_INTERRUPTIBLE and calling schedule(). In case kthread_stop sets should_stop and wakes up the process after should_stop is checked by the irq thread but before the task's state is changed, the irq thread might never exit: kthread_stop irq_wait_for_interrupt ------------ ---------------------- ... ... while (!kthread_should_stop()) { kthread->should_stop = 1; wake_up_process(k); wait_for_completion(&kthread->exited); ... set_current_state(TASK_INTERRUPTIBLE); ... schedule(); } Fix this by checking if the thread should stop after modifying the task's state. [ tglx: Simplified it a bit ] Signed-off-by: Ido Yariv Link: http://lkml.kernel.org/r/1322740508-22640-1-git-send-email-ido@wizery.com Signed-off-by: Thomas Gleixner Cc: stable@kernel.org --- kernel/irq/manage.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 0e2b179bc7b3..1da999f5e746 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -623,8 +623,9 @@ static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id) static int irq_wait_for_interrupt(struct irqaction *action) { + set_current_state(TASK_INTERRUPTIBLE); + while (!kthread_should_stop()) { - set_current_state(TASK_INTERRUPTIBLE); if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags)) { @@ -632,7 +633,9 @@ static int irq_wait_for_interrupt(struct irqaction *action) return 0; } schedule(); + set_current_state(TASK_INTERRUPTIBLE); } + __set_current_state(TASK_RUNNING); return -1; } From cce4aa378a049f4275416ee6302dd24f37b289df Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 2 Dec 2011 15:29:12 +0100 Subject: [PATCH 198/364] ALSA: hda/realtek - Fix Oops in alc_mux_select() When no imux is available (e.g. a single capture source), alc_auto_init_input_src() may trigger an Oops due to the access to -1. Add a proper zero-check to avoid it. Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index cbde019d3d52..a7d1bc4e0d09 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -297,6 +297,8 @@ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, imux = &spec->input_mux[mux_idx]; if (!imux->num_items && mux_idx > 0) imux = &spec->input_mux[0]; + if (!imux->num_items) + return 0; if (idx >= imux->num_items) idx = imux->num_items - 1; From c1be84309c58b1e7c6d626e28fba41a22b364c3d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 Dec 2011 12:34:16 +0100 Subject: [PATCH 199/364] tick-broadcast: Stop active broadcast device when replacing it When a better rated broadcast device is installed, then the current active device is not disabled, which results in two running broadcast devices. Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org --- kernel/time/tick-broadcast.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index f954282d9a82..fd4a7b1625a2 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -71,7 +71,7 @@ int tick_check_broadcast_device(struct clock_event_device *dev) (dev->features & CLOCK_EVT_FEAT_C3STOP)) return 0; - clockevents_exchange_device(NULL, dev); + clockevents_exchange_device(tick_broadcast_device.evtdev, dev); tick_broadcast_device.evtdev = dev; if (!cpumask_empty(tick_get_broadcast_mask())) tick_broadcast_start_periodic(dev); From de28f25e8244c7353abed8de0c7792f5f883588c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 Dec 2011 16:02:45 +0100 Subject: [PATCH 200/364] clockevents: Set noop handler in clockevents_exchange_device() If a device is shutdown, then there might be a pending interrupt, which will be processed after we reenable interrupts, which causes the original handler to be run. If the old handler is the (broadcast) periodic handler the shutdown state might hang the kernel completely. Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org --- kernel/time/clockevents.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 1ecd6ba36d6c..c4eb71c8b2ea 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -387,6 +387,7 @@ void clockevents_exchange_device(struct clock_event_device *old, * released list and do a notify add later. */ if (old) { + old->event_handler = clockevents_handle_noop; clockevents_set_mode(old, CLOCK_EVT_MODE_UNUSED); list_del(&old->list); list_add(&old->list, &clockevents_released); From 87b86ade8bb07473596e2551de7bb64c1f44bbe4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 14 Aug 2011 13:39:20 +0900 Subject: [PATCH 201/364] ASoC: Mark WM8994 ADC muxes as virtual Since they don't actually have power bits but do have events associated with them it's important that we bootstrap their state properly which making them virtual does. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 6c2988549003..d0c545b73d78 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1325,15 +1325,15 @@ SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0), }; static const struct snd_soc_dapm_widget wm8994_adc_revd_widgets[] = { -SND_SOC_DAPM_MUX_E("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux, - adc_mux_ev, SND_SOC_DAPM_PRE_PMU), -SND_SOC_DAPM_MUX_E("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux, - adc_mux_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_VIRT_MUX_E("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux, + adc_mux_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_VIRT_MUX_E("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux, + adc_mux_ev, SND_SOC_DAPM_PRE_PMU), }; static const struct snd_soc_dapm_widget wm8994_adc_widgets[] = { -SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux), -SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux), +SND_SOC_DAPM_VIRT_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux), +SND_SOC_DAPM_VIRT_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux), }; static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = { From 274b89ca3b006926cb9b45d78ab5906f4c0fc0aa Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 2 Dec 2011 08:19:17 -0800 Subject: [PATCH 202/364] iwlagn: fix HW crypto for TX-only keys Group keys in IBSS or AP mode are not programmed into the device since we give the key to it with every TX packet. However, we do need mac80211 to create the MMIC & PN in all cases. Move the code around to set the key flags all the time. We set them even when the key is removed again but that is obviously harmless. Cc: stable@vger.kernel.org Reported-by: Reinette Chatre Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-sta.c | 5 ----- drivers/net/wireless/iwlwifi/iwl-agn.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c index ed6283623932..4b2aa1da0953 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c @@ -1268,9 +1268,6 @@ int iwl_set_dynamic_key(struct iwl_priv *priv, switch (keyconf->cipher) { case WLAN_CIPHER_SUITE_TKIP: - keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - if (sta) addr = sta->addr; else /* station mode case only */ @@ -1283,8 +1280,6 @@ int iwl_set_dynamic_key(struct iwl_priv *priv, seq.tkip.iv32, p1k, CMD_SYNC); break; case WLAN_CIPHER_SUITE_CCMP: - keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - /* fall through */ case WLAN_CIPHER_SUITE_WEP40: case WLAN_CIPHER_SUITE_WEP104: ret = iwlagn_send_sta_key(priv, keyconf, sta_id, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index ccba69b7f8a7..6094deab5106 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2316,6 +2316,17 @@ static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, return -EOPNOTSUPP; } + switch (key->cipher) { + case WLAN_CIPHER_SUITE_TKIP: + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + /* fall through */ + case WLAN_CIPHER_SUITE_CCMP: + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + break; + default: + break; + } + /* * We could program these keys into the hardware as well, but we * don't expect much multicast traffic in IBSS and having keys From 34a5b4b6af104cf18eb50748509528b9bdbc4036 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 2 Dec 2011 08:19:18 -0800 Subject: [PATCH 203/364] iwlwifi: do not re-configure HT40 after associated The ht40 setting should not change after association unless channel switch This fix a problem we are seeing which cause uCode assert because driver sending invalid information and make uCode confuse Here is the firmware assert message: kernel: iwlagn 0000:03:00.0: Microcode SW error detected. Restarting 0x82000000. kernel: iwlagn 0000:03:00.0: Loaded firmware version: 17.168.5.3 build 42301 kernel: iwlagn 0000:03:00.0: Start IWL Error Log Dump: kernel: iwlagn 0000:03:00.0: Status: 0x000512E4, count: 6 kernel: iwlagn 0000:03:00.0: 0x00002078 | ADVANCED_SYSASSERT kernel: iwlagn 0000:03:00.0: 0x00009514 | uPc kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink1 kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink2 kernel: iwlagn 0000:03:00.0: 0x0000D1F2 | interruptlink1 kernel: iwlagn 0000:03:00.0: 0x00000000 | interruptlink2 kernel: iwlagn 0000:03:00.0: 0x01008035 | data1 kernel: iwlagn 0000:03:00.0: 0x0000C90F | data2 kernel: iwlagn 0000:03:00.0: 0x000005A7 | line kernel: iwlagn 0000:03:00.0: 0x5080B520 | beacon time kernel: iwlagn 0000:03:00.0: 0xCC515AE0 | tsf low kernel: iwlagn 0000:03:00.0: 0x00000003 | tsf hi kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp1 kernel: iwlagn 0000:03:00.0: 0x29703BF0 | time gp2 kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp3 kernel: iwlagn 0000:03:00.0: 0x000111A8 | uCode version kernel: iwlagn 0000:03:00.0: 0x000000B0 | hw version kernel: iwlagn 0000:03:00.0: 0x00480303 | board version kernel: iwlagn 0000:03:00.0: 0x09E8004E | hcmd kernel: iwlagn 0000:03:00.0: CSR values: kernel: iwlagn 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) kernel: iwlagn 0000:03:00.0: CSR_HW_IF_CONFIG_REG: 0X00480303 kernel: iwlagn 0000:03:00.0: CSR_INT_COALESCING: 0X0000ff40 kernel: iwlagn 0000:03:00.0: CSR_INT: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_INT_MASK: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_FH_INT_STATUS: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GPIO_IN: 0X00000030 kernel: iwlagn 0000:03:00.0: CSR_RESET: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GP_CNTRL: 0X080403c5 kernel: iwlagn 0000:03:00.0: CSR_HW_REV: 0X000000b0 kernel: iwlagn 0000:03:00.0: CSR_EEPROM_REG: 0X07d60ffd kernel: iwlagn 0000:03:00.0: CSR_EEPROM_GP: 0X90000001 kernel: iwlagn 0000:03:00.0: CSR_OTP_GP_REG: 0X00030001 kernel: iwlagn 0000:03:00.0: CSR_GIO_REG: 0X00080044 kernel: iwlagn 0000:03:00.0: CSR_GP_UCODE_REG: 0X000093bb kernel: iwlagn 0000:03:00.0: CSR_GP_DRIVER_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP1: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP2: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_LED_REG: 0X00000078 kernel: iwlagn 0000:03:00.0: CSR_DRAM_INT_TBL_REG: 0X88214dd2 kernel: iwlagn 0000:03:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 kernel: iwlagn 0000:03:00.0: CSR_ANA_PLL_CFG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_HW_REV_WA_REG: 0X0001001a kernel: iwlagn 0000:03:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 kernel: iwlagn 0000:03:00.0: FH register values: kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X21316d00 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021479c0 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000060 kernel: iwlagn 0000:03:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries kernel: ------------[ cut here ]------------ WARNING: at net/mac80211/util.c:1208 ieee80211_reconfig+0x1f1/0x407() kernel: Hardware name: 4290W4H kernel: Pid: 1896, comm: kworker/0:0 Not tainted 3.1.0 #2 kernel: Call Trace: kernel: [] ? warn_slowpath_common+0x73/0x87 kernel: [] ? ieee80211_reconfig+0x1f1/0x407 kernel: [] ? ieee80211_recalc_smps_work+0x32/0x32 kernel: [] ? ieee80211_restart_work+0x7e/0x87 kernel: [] ? process_one_work+0x1c8/0x2e3 kernel: [] ? worker_thread+0x17a/0x23a kernel: [] ? manage_workers.clone.18+0x15b/0x15b kernel: [] ? manage_workers.clone.18+0x15b/0x15b kernel: [] ? kthread+0x7a/0x82 kernel: [] ? kernel_thread_helper+0x4/0x10 kernel: [] ? kthread_flush_work_fn+0x11/0x11 kernel: [] ? gs_change+0xb/0xb Cc: 3.1+ Reported-by: Udo Steinberg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 36 +++++++++++++-------- drivers/net/wireless/iwlwifi/iwl-agn.c | 18 ++--------- drivers/net/wireless/iwlwifi/iwl-agn.h | 2 ++ 3 files changed, 28 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index 58a381c01c89..a7a6def40d05 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -528,6 +528,24 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) return 0; } +void iwlagn_config_ht40(struct ieee80211_conf *conf, + struct iwl_rxon_context *ctx) +{ + if (conf_is_ht40_minus(conf)) { + ctx->ht.extension_chan_offset = + IEEE80211_HT_PARAM_CHA_SEC_BELOW; + ctx->ht.is_40mhz = true; + } else if (conf_is_ht40_plus(conf)) { + ctx->ht.extension_chan_offset = + IEEE80211_HT_PARAM_CHA_SEC_ABOVE; + ctx->ht.is_40mhz = true; + } else { + ctx->ht.extension_chan_offset = + IEEE80211_HT_PARAM_CHA_SEC_NONE; + ctx->ht.is_40mhz = false; + } +} + int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) { struct iwl_priv *priv = hw->priv; @@ -586,19 +604,11 @@ int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) ctx->ht.enabled = conf_is_ht(conf); if (ctx->ht.enabled) { - if (conf_is_ht40_minus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_BELOW; - ctx->ht.is_40mhz = true; - } else if (conf_is_ht40_plus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_ABOVE; - ctx->ht.is_40mhz = true; - } else { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_NONE; - ctx->ht.is_40mhz = false; - } + /* if HT40 is used, it should not change + * after associated except channel switch */ + if (iwl_is_associated_ctx(ctx) && + !ctx->ht.is_40mhz) + iwlagn_config_ht40(conf, ctx); } else ctx->ht.is_40mhz = false; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 6094deab5106..f5564514868e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2610,21 +2610,9 @@ static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, /* Configure HT40 channels */ ctx->ht.enabled = conf_is_ht(conf); - if (ctx->ht.enabled) { - if (conf_is_ht40_minus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_BELOW; - ctx->ht.is_40mhz = true; - } else if (conf_is_ht40_plus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_ABOVE; - ctx->ht.is_40mhz = true; - } else { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_NONE; - ctx->ht.is_40mhz = false; - } - } else + if (ctx->ht.enabled) + iwlagn_config_ht40(conf, ctx); + else ctx->ht.is_40mhz = false; if ((le16_to_cpu(ctx->staging.channel) != ch)) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h index 5b936ec1a541..3856abaea507 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn.h @@ -86,6 +86,8 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *bss_conf, u32 changes); +void iwlagn_config_ht40(struct ieee80211_conf *conf, + struct iwl_rxon_context *ctx); /* uCode */ int iwlagn_rx_calib_result(struct iwl_priv *priv, From 9995ffe5f5fdddcc73e4465cc3f8b38714df8108 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 2 Dec 2011 08:19:19 -0800 Subject: [PATCH 204/364] iwlwifi: change the default behavior of watchdog timer The current default watchdog timer is enabled, but we are seeing issues on legacy devices. So change the default setting of watchdog timer to per device based. But user still can use the "wd_disable" module parameter to overwrite the system setting Cc: stable@vger.kernel.org #3.0+ Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-1000.c | 1 + drivers/net/wireless/iwlwifi/iwl-5000.c | 1 + drivers/net/wireless/iwlwifi/iwl-agn.c | 5 +++-- drivers/net/wireless/iwlwifi/iwl-core.c | 22 +++++++++++++++++----- drivers/net/wireless/iwlwifi/iwl-core.h | 2 ++ drivers/net/wireless/iwlwifi/iwl-shared.h | 4 ++-- 6 files changed, 26 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index e12b48c2cff6..dd008b0e6417 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -191,6 +191,7 @@ static struct iwl_base_params iwl1000_base_params = { .chain_noise_scale = 1000, .wd_timeout = IWL_DEF_WD_TIMEOUT, .max_event_log_size = 128, + .wd_disable = true, }; static struct iwl_ht_params iwl1000_ht_params = { .ht_greenfield_support = true, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index c511c98a89a8..f55fb2d1af52 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -364,6 +364,7 @@ static struct iwl_base_params iwl5000_base_params = { .wd_timeout = IWL_LONG_WD_TIMEOUT, .max_event_log_size = 512, .no_idle_support = true, + .wd_disable = true, }; static struct iwl_ht_params iwl5000_ht_params = { .ht_greenfield_support = true, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index f5564514868e..bacc06c95e7a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3498,9 +3498,10 @@ MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])"); module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO); MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])"); -module_param_named(wd_disable, iwlagn_mod_params.wd_disable, bool, S_IRUGO); +module_param_named(wd_disable, iwlagn_mod_params.wd_disable, int, S_IRUGO); MODULE_PARM_DESC(wd_disable, - "Disable stuck queue watchdog timer (default: 0 [enabled])"); + "Disable stuck queue watchdog timer 0=system default, " + "1=disable, 2=enable (default: 0)"); /* * set bt_coex_active to true, uCode will do kill/defer diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 001fdf140abb..fcf54160e4ed 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1810,11 +1810,23 @@ void iwl_setup_watchdog(struct iwl_priv *priv) { unsigned int timeout = priv->cfg->base_params->wd_timeout; - if (timeout && !iwlagn_mod_params.wd_disable) - mod_timer(&priv->watchdog, - jiffies + msecs_to_jiffies(IWL_WD_TICK(timeout))); - else - del_timer(&priv->watchdog); + if (!iwlagn_mod_params.wd_disable) { + /* use system default */ + if (timeout && !priv->cfg->base_params->wd_disable) + mod_timer(&priv->watchdog, + jiffies + + msecs_to_jiffies(IWL_WD_TICK(timeout))); + else + del_timer(&priv->watchdog); + } else { + /* module parameter overwrite default configuration */ + if (timeout && iwlagn_mod_params.wd_disable == 2) + mod_timer(&priv->watchdog, + jiffies + + msecs_to_jiffies(IWL_WD_TICK(timeout))); + else + del_timer(&priv->watchdog); + } } /** diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 137da3380704..f2fc288f3dd3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -113,6 +113,7 @@ struct iwl_lib_ops { * @shadow_reg_enable: HW shadhow register bit * @no_idle_support: do not support idle mode * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up + * wd_disable: disable watchdog timer */ struct iwl_base_params { int eeprom_size; @@ -134,6 +135,7 @@ struct iwl_base_params { const bool shadow_reg_enable; const bool no_idle_support; const bool hd_v2; + const bool wd_disable; }; /* * @advanced_bt_coexist: support advanced bt coexist diff --git a/drivers/net/wireless/iwlwifi/iwl-shared.h b/drivers/net/wireless/iwlwifi/iwl-shared.h index 1f7a93c67c45..14eaf37ce3b1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-shared.h +++ b/drivers/net/wireless/iwlwifi/iwl-shared.h @@ -120,7 +120,7 @@ extern struct iwl_mod_params iwlagn_mod_params; * @restart_fw: restart firmware, default = 1 * @plcp_check: enable plcp health check, default = true * @ack_check: disable ack health check, default = false - * @wd_disable: enable stuck queue check, default = false + * @wd_disable: enable stuck queue check, default = 0 * @bt_coex_active: enable bt coex, default = true * @led_mode: system default, default = 0 * @no_sleep_autoadjust: disable autoadjust, default = true @@ -141,7 +141,7 @@ struct iwl_mod_params { int restart_fw; bool plcp_check; bool ack_check; - bool wd_disable; + int wd_disable; bool bt_coex_active; int led_mode; bool no_sleep_autoadjust; From a99ebf43f49f4499ab0e2a8a9132ad6ed6ba2409 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 1 Dec 2011 11:24:20 +0000 Subject: [PATCH 205/364] xfs: fix allocation length overflow in xfs_bmapi_write() When testing the new xfstests --large-fs option that does very large file preallocations, this assert was tripped deep in xfs_alloc_vextent(): XFS: Assertion failed: args->minlen <= args->maxlen, file: fs/xfs/xfs_alloc.c, line: 2239 The allocation was trying to allocate a zero length extent because the lower 32 bits of the allocation length was zero. The remaining length of the allocation to be done was an exact multiple of 2^32 - the first case I saw was at 496TB remaining to be allocated. This turns out to be an overflow when converting the allocation length (a 64 bit quantity) into the extent length to allocate (a 32 bit quantity), and it requires the length to be allocated an exact multiple of 2^32 blocks to trip the assert. Fix it by limiting the extent lenth to allocate to MAXEXTLEN. Signed-off-by: Dave Chinner Signed-off-by: Ben Myers Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_bmap.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index c68baeb0974a..d0ab78837057 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -2383,6 +2383,8 @@ xfs_bmap_btalloc( int tryagain; int error; + ASSERT(ap->length); + mp = ap->ip->i_mount; align = ap->userdata ? xfs_get_extsz_hint(ap->ip) : 0; if (unlikely(align)) { @@ -4629,6 +4631,8 @@ xfs_bmapi_allocate( int error; int rt; + ASSERT(bma->length > 0); + rt = (whichfork == XFS_DATA_FORK) && XFS_IS_REALTIME_INODE(bma->ip); /* @@ -4849,6 +4853,7 @@ xfs_bmapi_write( ASSERT(*nmap <= XFS_BMAP_MAX_NMAP); ASSERT(!(flags & XFS_BMAPI_IGSTATE)); ASSERT(tp != NULL); + ASSERT(len > 0); whichfork = (flags & XFS_BMAPI_ATTRFORK) ? XFS_ATTR_FORK : XFS_DATA_FORK; @@ -4918,9 +4923,22 @@ xfs_bmapi_write( bma.eof = eof; bma.conv = !!(flags & XFS_BMAPI_CONVERT); bma.wasdel = wasdelay; - bma.length = len; bma.offset = bno; + /* + * There's a 32/64 bit type mismatch between the + * allocation length request (which can be 64 bits in + * length) and the bma length request, which is + * xfs_extlen_t and therefore 32 bits. Hence we have to + * check for 32-bit overflows and handle them here. + */ + if (len > (xfs_filblks_t)MAXEXTLEN) + bma.length = MAXEXTLEN; + else + bma.length = len; + + ASSERT(len > 0); + ASSERT(bma.length > 0); error = xfs_bmapi_allocate(&bma, flags); if (error) goto error0; From f61759e6b831a55b89e584b198c3da325e2bc379 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Fri, 2 Dec 2011 11:39:42 +0000 Subject: [PATCH 206/364] ipv4: make sure RTO_ONLINK is saved in routing cache __mkroute_output fails to work with the original tos and uses value with stripped RTO_ONLINK bit. Make sure we put the original TOS bits into rt_key_tos because it used to match cached route. Signed-off-by: Julian Anastasov Signed-off-by: David S. Miller --- net/ipv4/route.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index ca5e237df029..588d971a3ba1 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -112,7 +112,7 @@ #include #define RT_FL_TOS(oldflp4) \ - ((u32)(oldflp4->flowi4_tos & (IPTOS_RT_MASK | RTO_ONLINK))) + ((oldflp4)->flowi4_tos & (IPTOS_RT_MASK | RTO_ONLINK)) #define IP_MAX_MTU 0xFFF0 @@ -2441,11 +2441,11 @@ EXPORT_SYMBOL(ip_route_input_common); static struct rtable *__mkroute_output(const struct fib_result *res, const struct flowi4 *fl4, __be32 orig_daddr, __be32 orig_saddr, - int orig_oif, struct net_device *dev_out, + int orig_oif, __u8 orig_rtos, + struct net_device *dev_out, unsigned int flags) { struct fib_info *fi = res->fi; - u32 tos = RT_FL_TOS(fl4); struct in_device *in_dev; u16 type = res->type; struct rtable *rth; @@ -2496,7 +2496,7 @@ static struct rtable *__mkroute_output(const struct fib_result *res, rth->rt_genid = rt_genid(dev_net(dev_out)); rth->rt_flags = flags; rth->rt_type = type; - rth->rt_key_tos = tos; + rth->rt_key_tos = orig_rtos; rth->rt_dst = fl4->daddr; rth->rt_src = fl4->saddr; rth->rt_route_iif = 0; @@ -2546,7 +2546,7 @@ static struct rtable *__mkroute_output(const struct fib_result *res, static struct rtable *ip_route_output_slow(struct net *net, struct flowi4 *fl4) { struct net_device *dev_out = NULL; - u32 tos = RT_FL_TOS(fl4); + __u8 tos = RT_FL_TOS(fl4); unsigned int flags = 0; struct fib_result res; struct rtable *rth; @@ -2722,7 +2722,7 @@ static struct rtable *ip_route_output_slow(struct net *net, struct flowi4 *fl4) make_route: rth = __mkroute_output(&res, fl4, orig_daddr, orig_saddr, orig_oif, - dev_out, flags); + tos, dev_out, flags); if (!IS_ERR(rth)) { unsigned int hash; From 36d54dc0c893b143748bcf13a1e3b7a00696115d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 3 Dec 2011 18:38:25 +0800 Subject: [PATCH 207/364] ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C SND_KIRKWOOD_SOC_T5325 selects SND_SOC_ALC5623, but SND_SOC_ALC5623 needs CONFIG_I2C. So we need to make SND_KIRKWOOD_SOC_T5325 depend on I2C, otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/alc5623.o sound/soc/codecs/alc5623.c: In function 'alc5623_i2c_probe': sound/soc/codecs/alc5623.c:1002: error: implicit declaration of function 'i2c_smbus_read_word_data' sound/soc/codecs/alc5623.c:1009: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/alc5623.c: In function 'alc5623_modinit': sound/soc/codecs/alc5623.c:1096: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/alc5623.c: In function 'alc5623_modexit': sound/soc/codecs/alc5623.c:1108: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/alc5623.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Also fix the same issue for SND_KIRKWOOD_SOC_OPENRD. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/kirkwood/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/kirkwood/Kconfig b/sound/soc/kirkwood/Kconfig index 8f49e165f4d1..c62d715235e2 100644 --- a/sound/soc/kirkwood/Kconfig +++ b/sound/soc/kirkwood/Kconfig @@ -12,6 +12,7 @@ config SND_KIRKWOOD_SOC_I2S config SND_KIRKWOOD_SOC_OPENRD tristate "SoC Audio support for Kirkwood Openrd Client" depends on SND_KIRKWOOD_SOC && (MACH_OPENRD_CLIENT || MACH_OPENRD_ULTIMATE) + depends on I2C select SND_KIRKWOOD_SOC_I2S select SND_SOC_CS42L51 help @@ -20,7 +21,7 @@ config SND_KIRKWOOD_SOC_OPENRD config SND_KIRKWOOD_SOC_T5325 tristate "SoC Audio support for HP t5325" - depends on SND_KIRKWOOD_SOC && MACH_T5325 + depends on SND_KIRKWOOD_SOC && MACH_T5325 && I2C select SND_KIRKWOOD_SOC_I2S select SND_SOC_ALC5623 help From e5fd47bfab2df0c2184cc0bf4245d8e1bb7724fb Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 21 Nov 2011 18:02:02 -0500 Subject: [PATCH 208/364] xen/pm_idle: Make pm_idle be default_idle under Xen. The idea behind commit d91ee5863b71 ("cpuidle: replace xen access to x86 pm_idle and default_idle") was to have one call - disable_cpuidle() which would make pm_idle not be molested by other code. It disallows cpuidle_idle_call to be set to pm_idle (which is excellent). But in the select_idle_routine() and idle_setup(), the pm_idle can still be set to either: amd_e400_idle, mwait_idle or default_idle. This depends on some CPU flags (MWAIT) and in AMD case on the type of CPU. In case of mwait_idle we can hit some instances where the hypervisor (Amazon EC2 specifically) sets the MWAIT and we get: Brought up 2 CPUs invalid opcode: 0000 [#1] SMP Pid: 0, comm: swapper Not tainted 3.1.0-0.rc6.git0.3.fc16.x86_64 #1 RIP: e030:[] [] mwait_idle+0x6f/0xb4 ... Call Trace: [] cpu_idle+0xae/0xe8 [] cpu_bringup_and_idle+0xe/0x10 RIP [] mwait_idle+0x6f/0xb4 RSP In the case of amd_e400_idle we don't get so spectacular crashes, but we do end up making an MSR which is trapped in the hypervisor, and then follow it up with a yield hypercall. Meaning we end up going to hypervisor twice instead of just once. The previous behavior before v3.0 was that pm_idle was set to default_idle regardless of select_idle_routine/idle_setup. We want to do that, but only for one specific case: Xen. This patch does that. Fixes RH BZ #739499 and Ubuntu #881076 Reported-by: Stefan Bader Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Linus Torvalds --- arch/x86/include/asm/system.h | 1 + arch/x86/kernel/process.c | 8 ++++++++ arch/x86/xen/setup.c | 2 +- 3 files changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h index c2ff2a1d845e..2d2f01ce6dcb 100644 --- a/arch/x86/include/asm/system.h +++ b/arch/x86/include/asm/system.h @@ -401,6 +401,7 @@ extern unsigned long arch_align_stack(unsigned long sp); extern void free_init_pages(char *what, unsigned long begin, unsigned long end); void default_idle(void); +bool set_pm_idle_to_default(void); void stop_this_cpu(void *dummy); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index b9b3b1a51643..ee5d4fbd53b4 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -403,6 +403,14 @@ void default_idle(void) EXPORT_SYMBOL(default_idle); #endif +bool set_pm_idle_to_default(void) +{ + bool ret = !!pm_idle; + + pm_idle = default_idle; + + return ret; +} void stop_this_cpu(void *dummy) { local_irq_disable(); diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 38d0af4fefec..1093f80c162d 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -410,6 +410,6 @@ void __init xen_arch_setup(void) #endif disable_cpuidle(); boot_option_idle_override = IDLE_HALT; - + WARN_ON(set_pm_idle_to_default()); fiddle_vdso(); } From 3989efb77046ad334518b6cddcf817184affe7c9 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 11:37:20 -0500 Subject: [PATCH 209/364] arch/tile: add a few #includes and an EXPORT to catch up with kernel changes. The empty_zero_page[] export is required for ZERO_PAGE() module references. The #includes are due to changes in implicit inclusion, and should of course have been in the sources from the beginning. Signed-off-by: Chris Metcalf --- arch/tile/kernel/pci-dma.c | 1 + arch/tile/kernel/pci.c | 1 + arch/tile/kernel/sysfs.c | 1 + arch/tile/lib/exports.c | 3 +++ 4 files changed, 6 insertions(+) diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c index 658f2ce426a4..b3ed19f8779c 100644 --- a/arch/tile/kernel/pci-dma.c +++ b/arch/tile/kernel/pci-dma.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index 2a8014cb1ff5..9d610d3fb11e 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c index b671a86f4515..602908268093 100644 --- a/arch/tile/kernel/sysfs.c +++ b/arch/tile/kernel/sysfs.c @@ -18,6 +18,7 @@ #include #include #include +#include #include /* Return a string queried from the hypervisor, truncated to page size. */ diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c index a87d2a859ba9..2a81d32de0da 100644 --- a/arch/tile/lib/exports.c +++ b/arch/tile/lib/exports.c @@ -39,6 +39,9 @@ EXPORT_SYMBOL(finv_user_asm); EXPORT_SYMBOL(current_text_addr); EXPORT_SYMBOL(dump_stack); +/* arch/tile/kernel/head.S */ +EXPORT_SYMBOL(empty_zero_page); + /* arch/tile/lib/, various memcpy files */ EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(__copy_to_user_inatomic); From c2851a9b1caa420c2cdbd517617166990e3723c0 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:51:05 -0500 Subject: [PATCH 210/364] arch/tile: fix double-free bug in homecache_free_pages() When freeing the page with this API, the page was "put" twice. This was only discovered bringing up an MPT fusion controller, which actually used the API; it hadn't been invoked previously, so the bug had gone unnoticed. Signed-off-by: Chris Metcalf --- arch/tile/mm/homecache.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c index cbe6f4f9eca3..1cc6ae477c98 100644 --- a/arch/tile/mm/homecache.c +++ b/arch/tile/mm/homecache.c @@ -449,9 +449,12 @@ void homecache_free_pages(unsigned long addr, unsigned int order) VM_BUG_ON(!virt_addr_valid((void *)addr)); page = virt_to_page((void *)addr); if (put_page_testzero(page)) { - int pages = (1 << order); homecache_change_page_home(page, order, initial_page_home()); - while (pages--) - __free_page(page++); + if (order == 0) { + free_hot_cold_page(page, 0); + } else { + init_page_count(page); + __free_pages(page, order); + } } } From a67ba43d30bf8c1cfdc2615439455302d2408453 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:54:31 -0500 Subject: [PATCH 211/364] asm-generic/unistd.h: support new process_vm_{readv,write} syscalls Also prototype the "compat" functions so they can be referenced from C code. Signed-off-by: Chris Metcalf Acked-by: Arnd Bergmann --- include/asm-generic/unistd.h | 8 +++++++- include/linux/compat.h | 9 +++++++++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h index f4c38d8c6674..2292d1af9d70 100644 --- a/include/asm-generic/unistd.h +++ b/include/asm-generic/unistd.h @@ -685,9 +685,15 @@ __SYSCALL(__NR_syncfs, sys_syncfs) __SYSCALL(__NR_setns, sys_setns) #define __NR_sendmmsg 269 __SC_COMP(__NR_sendmmsg, sys_sendmmsg, compat_sys_sendmmsg) +#define __NR_process_vm_readv 270 +__SC_COMP(__NR_process_vm_readv, sys_process_vm_readv, \ + compat_sys_process_vm_readv) +#define __NR_process_vm_writev 271 +__SC_COMP(__NR_process_vm_writev, sys_process_vm_writev, \ + compat_sys_process_vm_writev) #undef __NR_syscalls -#define __NR_syscalls 270 +#define __NR_syscalls 272 /* * All syscalls below here should go away really, diff --git a/include/linux/compat.h b/include/linux/compat.h index 154bf5683015..66ed067fb729 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -552,5 +552,14 @@ extern ssize_t compat_rw_copy_check_uvector(int type, extern void __user *compat_alloc_user_space(unsigned long len); +asmlinkage ssize_t compat_sys_process_vm_readv(compat_pid_t pid, + const struct compat_iovec __user *lvec, + unsigned long liovcnt, const struct compat_iovec __user *rvec, + unsigned long riovcnt, unsigned long flags); +asmlinkage ssize_t compat_sys_process_vm_writev(compat_pid_t pid, + const struct compat_iovec __user *lvec, + unsigned long liovcnt, const struct compat_iovec __user *rvec, + unsigned long riovcnt, unsigned long flags); + #endif /* CONFIG_COMPAT */ #endif /* _LINUX_COMPAT_H */ From 781a5e92bc3b666bc5752e3ce7e977978c2f64e9 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:56:03 -0500 Subject: [PATCH 212/364] drivers/net/ethernet/tile: use skb_frag_page() API This replaces raw access to the "page" field of the skb_frag_t. Signed-off-by: Chris Metcalf Acked-by: David S. Miller --- drivers/net/ethernet/tile/tilepro.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c index 10826d8a2a2d..1c0f9facb9b1 100644 --- a/drivers/net/ethernet/tile/tilepro.c +++ b/drivers/net/ethernet/tile/tilepro.c @@ -1697,7 +1697,7 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags, for (i = 0; i < sh->nr_frags; i++) { skb_frag_t *f = &sh->frags[i]; - unsigned long pfn = page_to_pfn(f->page); + unsigned long pfn = page_to_pfn(skb_frag_page(f)); /* FIXME: Compute "hash_for_home" properly. */ /* ISSUE: The hypervisor checks CHIP_HAS_REV1_DMA_PACKETS(). */ @@ -1706,7 +1706,7 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags, /* FIXME: Hmmm. */ if (!hash_default) { void *va = pfn_to_kaddr(pfn) + f->page_offset; - BUG_ON(PageHighMem(f->page)); + BUG_ON(PageHighMem(skb_frag_page(f))); finv_buffer_remote(va, f->size, 0); } From 0c90547b4a3fcee184db4d54ffc1a4fb17fd54d6 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:58:19 -0500 Subject: [PATCH 213/364] arch/tile: use new generic {enable,disable}_percpu_irq() routines We provided very similar routines internally, but now we can hook into the generic framework by supplying our routines as function pointers in the irq_chip structure instead. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/irq.h | 10 ---------- arch/tile/kernel/irq.c | 16 ++++++++-------- drivers/net/ethernet/tile/tilepro.c | 4 ++-- 3 files changed, 10 insertions(+), 20 deletions(-) diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h index 94e9a511de84..f80f8ceabc67 100644 --- a/arch/tile/include/asm/irq.h +++ b/arch/tile/include/asm/irq.h @@ -74,16 +74,6 @@ enum { */ void tile_irq_activate(unsigned int irq, int tile_irq_type); -/* - * For onboard, non-PCI (e.g. TILE_IRQ_PERCPU) devices, drivers know - * how to use enable/disable_percpu_irq() to manage interrupts on each - * core. We can't use the generic enable/disable_irq() because they - * use a single reference count per irq, rather than per cpu per irq. - */ -void enable_percpu_irq(unsigned int irq); -void disable_percpu_irq(unsigned int irq); - - void setup_irq_regs(void); #endif /* _ASM_TILE_IRQ_H */ diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c index aa0134db2dd6..02e628065012 100644 --- a/arch/tile/kernel/irq.c +++ b/arch/tile/kernel/irq.c @@ -152,14 +152,13 @@ void tile_dev_intr(struct pt_regs *regs, int intnum) * Remove an irq from the disabled mask. If we're in an interrupt * context, defer enabling the HW interrupt until we leave. */ -void enable_percpu_irq(unsigned int irq) +static void tile_irq_chip_enable(struct irq_data *d) { - get_cpu_var(irq_disable_mask) &= ~(1UL << irq); + get_cpu_var(irq_disable_mask) &= ~(1UL << d->irq); if (__get_cpu_var(irq_depth) == 0) - unmask_irqs(1UL << irq); + unmask_irqs(1UL << d->irq); put_cpu_var(irq_disable_mask); } -EXPORT_SYMBOL(enable_percpu_irq); /* * Add an irq to the disabled mask. We disable the HW interrupt @@ -167,13 +166,12 @@ EXPORT_SYMBOL(enable_percpu_irq); * in an interrupt context, the return path is careful to avoid * unmasking a newly disabled interrupt. */ -void disable_percpu_irq(unsigned int irq) +static void tile_irq_chip_disable(struct irq_data *d) { - get_cpu_var(irq_disable_mask) |= (1UL << irq); - mask_irqs(1UL << irq); + get_cpu_var(irq_disable_mask) |= (1UL << d->irq); + mask_irqs(1UL << d->irq); put_cpu_var(irq_disable_mask); } -EXPORT_SYMBOL(disable_percpu_irq); /* Mask an interrupt. */ static void tile_irq_chip_mask(struct irq_data *d) @@ -209,6 +207,8 @@ static void tile_irq_chip_eoi(struct irq_data *d) static struct irq_chip tile_irq_chip = { .name = "tile_irq_chip", + .irq_enable = tile_irq_chip_enable, + .irq_disable = tile_irq_chip_disable, .irq_ack = tile_irq_chip_ack, .irq_eoi = tile_irq_chip_eoi, .irq_mask = tile_irq_chip_mask, diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c index 1c0f9facb9b1..1187a1169eb2 100644 --- a/drivers/net/ethernet/tile/tilepro.c +++ b/drivers/net/ethernet/tile/tilepro.c @@ -926,7 +926,7 @@ static int tile_net_poll(struct napi_struct *napi, int budget) goto done; /* Re-enable the ingress interrupt. */ - enable_percpu_irq(priv->intr_id); + enable_percpu_irq(priv->intr_id, 0); /* HACK: Avoid the "rotting packet" problem (see above). */ if (qup->__packet_receive_read != @@ -1296,7 +1296,7 @@ static void tile_net_open_enable(void *dev_ptr) info->napi_enabled = true; /* Enable the ingress interrupt. */ - enable_percpu_irq(priv->intr_id); + enable_percpu_irq(priv->intr_id, 0); } From 8e8da023f5af71662867729db5547dc54786093c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 4 Dec 2011 11:57:09 -0800 Subject: [PATCH 214/364] x86: Fix boot failures on older AMD CPU's People with old AMD chips are getting hung boots, because commit bcb80e53877c ("x86, microcode, AMD: Add microcode revision to /proc/cpuinfo") moved the microcode detection too early into "early_init_amd()". At that point we are *so* early in the booth that the exception tables haven't even been set up yet, so the whole rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); doesn't actually work: if the rdmsr does a GP fault (due to non-existant MSR register on older CPU's), we can't fix it up yet, and the boot fails. Fix it by simply moving the code to a slightly later point in the boot (init_amd() instead of early_init_amd()), since the kernel itself doesn't even really care about the microcode patchlevel at this point (or really ever: it's made available to user space in /proc/cpuinfo, and updated if you do a microcode load). Reported-tested-and-bisected-by: Larry Finger Tested-by: Bob Tracy Acked-by: Borislav Petkov Cc: Ingo Molnar Cc: Srivatsa S. Bhat Signed-off-by: Linus Torvalds --- arch/x86/kernel/cpu/amd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index c7e46cb35327..0bab2b18bb20 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -442,8 +442,6 @@ static void __cpuinit bsp_init_amd(struct cpuinfo_x86 *c) static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) { - u32 dummy; - early_init_amd_mc(c); /* @@ -473,12 +471,12 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_EXTD_APICID); } #endif - - rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); } static void __cpuinit init_amd(struct cpuinfo_x86 *c) { + u32 dummy; + #ifdef CONFIG_SMP unsigned long long value; @@ -657,6 +655,8 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) checking_wrmsrl(MSR_AMD64_MCx_MASK(4), mask); } } + + rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); } #ifdef CONFIG_X86_32 From ef1497707c69f3805bbca97c5d10c2913b6d2fa1 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 4 Dec 2011 19:35:20 +0800 Subject: [PATCH 215/364] ASoC: uda1380: Return proper error in uda1380_modinit failure path Return proper error for uda1380_modinit if i2c_add_driver() fails. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/codecs/uda1380.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index c5ca8cfea60f..0441893e270e 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -863,13 +863,13 @@ static struct i2c_driver uda1380_i2c_driver = { static int __init uda1380_modinit(void) { - int ret; + int ret = 0; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) ret = i2c_add_driver(&uda1380_i2c_driver); if (ret != 0) pr_err("Failed to register UDA1380 I2C driver: %d\n", ret); #endif - return 0; + return ret; } module_init(uda1380_modinit); From b971c370a4d265848d9df0793b2f7fcc5b16b378 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 4 Dec 2011 16:30:18 +0800 Subject: [PATCH 216/364] ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700 SND_SOC_RAUMFELD selects SND_SOC_CS4270 which needs CONFIG_I2C, and also selects SND_SOC_AK4104 which needs SPI_MASTER. Thus make SND_SOC_RAUMFELD depend on I2C && SPI_MASTER. Add depend on SPI_MASTER to fix below build error if CONFIG_SPI_MASTER is not selected. LD .tmp_vmlinux1 sound/built-in.o: In function `ak4104_spi_write': last.c:(.text+0x290cc): undefined reference to `spi_sync' sound/built-in.o: In function `ak4104_probe': last.c:(.text+0x292a0): undefined reference to `spi_write_then_read' sound/built-in.o: In function `ak4104_spi_probe': last.c:(.text+0x29398): undefined reference to `spi_setup' sound/built-in.o: In function `ak4104_init': last.c:(.init.text+0x4ec): undefined reference to `spi_register_driver' make: *** [.tmp_vmlinux1] Error 1 Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/cs4270.o sound/soc/codecs/cs4270.c: In function 'cs4270_i2c_probe': sound/soc/codecs/cs4270.c:657: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/cs4270.c: In function 'cs4270_init': sound/soc/codecs/cs4270.c:730: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/cs4270.c: In function 'cs4270_exit': sound/soc/codecs/cs4270.c:736: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/cs4270.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 SND_PXA2XX_SOC_HX4700 selects SND_SOC_AK4641 which needs CONFIG_I2C. Thus make SND_PXA2XX_SOC_HX4700 depend on I2C. Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/ak4641.o sound/soc/codecs/ak4641.c: In function 'ak4641_modinit': sound/soc/codecs/ak4641.c:646: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/ak4641.c: In function 'ak4641_exit': sound/soc/codecs/ak4641.c:656: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/ak4641.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/pxa/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index ffd2242e305f..a0f7d3cfa470 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -151,6 +151,7 @@ config SND_SOC_ZYLONITE config SND_SOC_RAUMFELD tristate "SoC Audio support Raumfeld audio adapter" depends on SND_PXA2XX_SOC && (MACH_RAUMFELD_SPEAKER || MACH_RAUMFELD_CONNECTOR) + depends on I2C && SPI_MASTER select SND_PXA_SOC_SSP select SND_SOC_CS4270 select SND_SOC_AK4104 @@ -159,7 +160,7 @@ config SND_SOC_RAUMFELD config SND_PXA2XX_SOC_HX4700 tristate "SoC Audio support for HP iPAQ hx4700" - depends on SND_PXA2XX_SOC && MACH_H4700 + depends on SND_PXA2XX_SOC && MACH_H4700 && I2C select SND_PXA2XX_SOC_I2S select SND_SOC_AK4641 help From 570a2429e964f8d63338b3450ba801a263b29b3a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 4 Dec 2011 16:11:16 +0800 Subject: [PATCH 217/364] ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C SND_SOC_MX27VIS_AIC32X4 selects SND_SOC_TLV320AIC32X4, but SND_SOC_TLV320AIC32X4 needs CONFIG_I2C. So we need to make SND_SOC_MX27VIS_AIC32X4 depend on I2C. otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/tlv320aic32x4.o sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_read': sound/soc/codecs/tlv320aic32x4.c:323: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_probe': sound/soc/codecs/tlv320aic32x4.c:641: error: 'i2c_master_send' undeclared (first use in this function) sound/soc/codecs/tlv320aic32x4.c:641: error: (Each undeclared identifier is reported only once sound/soc/codecs/tlv320aic32x4.c:641: error: for each function it appears in.) sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_modinit': sound/soc/codecs/tlv320aic32x4.c:763: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_exit': sound/soc/codecs/tlv320aic32x4.c:774: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/tlv320aic32x4.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/imx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig index b133bfcc5848..738391757f2c 100644 --- a/sound/soc/imx/Kconfig +++ b/sound/soc/imx/Kconfig @@ -28,7 +28,7 @@ config SND_MXC_SOC_WM1133_EV1 config SND_SOC_MX27VIS_AIC32X4 tristate "SoC audio support for Visstrim M10 boards" - depends on MACH_IMX27_VISSTRIM_M10 + depends on MACH_IMX27_VISSTRIM_M10 && I2C select SND_SOC_TLV320AIC32X4 select SND_MXC_SOC_MX2 help From 6a600a8b8749566a7d81ad75dcb8bf5342b5a39a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 15 Nov 2011 10:51:15 +0100 Subject: [PATCH 218/364] perf, x86: Disable PEBS on SandyBridge chips Cc: Stephane Eranian Cc: stable@kernel.org Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 2be5ebe99872..8d601b18bf9f 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1545,6 +1545,13 @@ static void intel_clovertown_quirks(void) x86_pmu.pebs_constraints = NULL; } +static void intel_sandybridge_quirks(void) +{ + printk(KERN_WARNING "PEBS disabled due to CPU errata.\n"); + x86_pmu.pebs = 0; + x86_pmu.pebs_constraints = NULL; +} + __init int intel_pmu_init(void) { union cpuid10_edx edx; @@ -1694,6 +1701,7 @@ __init int intel_pmu_init(void) break; case 42: /* SandyBridge */ + x86_pmu.quirks = intel_sandybridge_quirks; case 45: /* SandyBridge, "Romely-EP" */ memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, sizeof(hw_cache_event_ids)); From 16e5294e5f8303756a179cf218e37dfb9ed34417 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Tue, 8 Nov 2011 19:20:44 +0100 Subject: [PATCH 219/364] perf, x86: Force IBS LVT offset assignment for family 10h On AMD family 10h we see firmware bug messages like the following: [Firmware Bug]: cpu 6, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu [Firmware Bug]: cpu 6, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100) [Firmware Bug]: using offset 1 for IBS interrupts [Firmware Bug]: workaround enabled for IBS LVT offset perf: AMD IBS detected (0x00000007) We always see this, since the offsets are not assigned by the BIOS for this family. Force LVT offset assignment in this case. If the OS assignment fails, fallback to BIOS settings and try to setup this. The fallback to BIOS settings weakens the family check since force_ibs_eilvt_setup() may fail e.g. in case of virtual machines. But setup may still succeed if BIOS offsets are correct. Other families don't have a workaround implemented that assigns LVT offsets. It's ok, to drop calling force_ibs_eilvt_setup() for that families. With the patch the [Firmware Bug] messages vanish. We see now: IBS: LVT offset 1 assigned perf: AMD IBS detected (0x00000007) Signed-off-by: Robert Richter Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111109162225.GO12451@erda.amd.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_amd_ibs.c | 29 +++++++++++++++--------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index ab6343d21825..3b8a2d30d14e 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -199,8 +199,7 @@ static int force_ibs_eilvt_setup(void) goto out; } - pr_err(FW_BUG "using offset %d for IBS interrupts\n", offset); - pr_err(FW_BUG "workaround enabled for IBS LVT offset\n"); + pr_info("IBS: LVT offset %d assigned\n", offset); return 0; out: @@ -265,19 +264,23 @@ perf_ibs_cpu_notifier(struct notifier_block *self, unsigned long action, void *h static __init int amd_ibs_init(void) { u32 caps; - int ret; + int ret = -EINVAL; caps = __get_ibs_caps(); if (!caps) return -ENODEV; /* ibs not supported by the cpu */ - if (!ibs_eilvt_valid()) { - ret = force_ibs_eilvt_setup(); - if (ret) { - pr_err("Failed to setup IBS, %d\n", ret); - return ret; - } - } + /* + * Force LVT offset assignment for family 10h: The offsets are + * not assigned by the BIOS for this family, so the OS is + * responsible for doing it. If the OS assignment fails, fall + * back to BIOS settings and try to setup this. + */ + if (boot_cpu_data.x86 == 0x10) + force_ibs_eilvt_setup(); + + if (!ibs_eilvt_valid()) + goto out; get_online_cpus(); ibs_caps = caps; @@ -287,7 +290,11 @@ static __init int amd_ibs_init(void) smp_call_function(setup_APIC_ibs, NULL, 1); put_online_cpus(); - return perf_event_ibs_init(); + ret = perf_event_ibs_init(); +out: + if (ret) + pr_err("Failed to setup IBS, %d\n", ret); + return ret; } /* Since we need the pci subsystem to init ibs we can't do this earlier: */ From 10c6db110d0eb4466b59812c49088ab56218fc2e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sat, 26 Nov 2011 02:47:31 +0100 Subject: [PATCH 220/364] perf: Fix loss of notification with multi-event When you do: $ perf record -e cycles,cycles,cycles noploop 10 You expect about 10,000 samples for each event, i.e., 10s at 1000samples/sec. However, this is not what's happening. You get much fewer samples, maybe 3700 samples/event: $ perf report -D | tail -15 Aggregated stats: TOTAL events: 10998 MMAP events: 66 COMM events: 2 SAMPLE events: 10930 cycles stats: TOTAL events: 3644 SAMPLE events: 3644 cycles stats: TOTAL events: 3642 SAMPLE events: 3642 cycles stats: TOTAL events: 3644 SAMPLE events: 3644 On a Intel Nehalem or even AMD64, there are 4 counters capable of measuring cycles, so there is plenty of space to measure those events without multiplexing (even with the NMI watchdog active). And even with multiplexing, we'd expect roughly the same number of samples per event. The root of the problem was that when the event that caused the buffer to become full was not the first event passed on the cmdline, the user notification would get lost. The notification was sent to the file descriptor of the overflowed event but the perf tool was not polling on it. The perf tool aggregates all samples into a single buffer, i.e., the buffer of the first event. Consequently, it assumes notifications for any event will come via that descriptor. The seemingly straight forward solution of moving the waitq into the ringbuffer object doesn't work because of life-time issues. One could perf_event_set_output() on a fd that you're also blocking on and cause the old rb object to be freed while its waitq would still be referenced by the blocked thread -> FAIL. Therefore link all events to the ringbuffer and broadcast the wakeup from the ringbuffer object to all possible events that could be waited upon. This is rather ugly, and we're open to better solutions but it works for now. Reported-by: Stephane Eranian Finished-by: Stephane Eranian Reviewed-by: Stephane Eranian Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111126014731.GA7030@quad Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 1 + kernel/events/core.c | 86 ++++++++++++++++++++++++++++++++++++- kernel/events/internal.h | 3 ++ kernel/events/ring_buffer.c | 3 ++ 4 files changed, 91 insertions(+), 2 deletions(-) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 1e9ebe5e0091..b1f89122bf6a 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -822,6 +822,7 @@ struct perf_event { int mmap_locked; struct user_struct *mmap_user; struct ring_buffer *rb; + struct list_head rb_entry; /* poll related */ wait_queue_head_t waitq; diff --git a/kernel/events/core.c b/kernel/events/core.c index b0c1186fd97b..600c1629b64d 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -185,6 +185,9 @@ static void cpu_ctx_sched_in(struct perf_cpu_context *cpuctx, static void update_context_time(struct perf_event_context *ctx); static u64 perf_event_time(struct perf_event *event); +static void ring_buffer_attach(struct perf_event *event, + struct ring_buffer *rb); + void __weak perf_event_print_debug(void) { } extern __weak const char *perf_pmu_name(void) @@ -3191,12 +3194,33 @@ static unsigned int perf_poll(struct file *file, poll_table *wait) struct ring_buffer *rb; unsigned int events = POLL_HUP; + /* + * Race between perf_event_set_output() and perf_poll(): perf_poll() + * grabs the rb reference but perf_event_set_output() overrides it. + * Here is the timeline for two threads T1, T2: + * t0: T1, rb = rcu_dereference(event->rb) + * t1: T2, old_rb = event->rb + * t2: T2, event->rb = new rb + * t3: T2, ring_buffer_detach(old_rb) + * t4: T1, ring_buffer_attach(rb1) + * t5: T1, poll_wait(event->waitq) + * + * To avoid this problem, we grab mmap_mutex in perf_poll() + * thereby ensuring that the assignment of the new ring buffer + * and the detachment of the old buffer appear atomic to perf_poll() + */ + mutex_lock(&event->mmap_mutex); + rcu_read_lock(); rb = rcu_dereference(event->rb); - if (rb) + if (rb) { + ring_buffer_attach(event, rb); events = atomic_xchg(&rb->poll, 0); + } rcu_read_unlock(); + mutex_unlock(&event->mmap_mutex); + poll_wait(file, &event->waitq, wait); return events; @@ -3497,6 +3521,49 @@ unlock: return ret; } +static void ring_buffer_attach(struct perf_event *event, + struct ring_buffer *rb) +{ + unsigned long flags; + + if (!list_empty(&event->rb_entry)) + return; + + spin_lock_irqsave(&rb->event_lock, flags); + if (!list_empty(&event->rb_entry)) + goto unlock; + + list_add(&event->rb_entry, &rb->event_list); +unlock: + spin_unlock_irqrestore(&rb->event_lock, flags); +} + +static void ring_buffer_detach(struct perf_event *event, + struct ring_buffer *rb) +{ + unsigned long flags; + + if (list_empty(&event->rb_entry)) + return; + + spin_lock_irqsave(&rb->event_lock, flags); + list_del_init(&event->rb_entry); + wake_up_all(&event->waitq); + spin_unlock_irqrestore(&rb->event_lock, flags); +} + +static void ring_buffer_wakeup(struct perf_event *event) +{ + struct ring_buffer *rb; + + rcu_read_lock(); + rb = rcu_dereference(event->rb); + list_for_each_entry_rcu(event, &rb->event_list, rb_entry) { + wake_up_all(&event->waitq); + } + rcu_read_unlock(); +} + static void rb_free_rcu(struct rcu_head *rcu_head) { struct ring_buffer *rb; @@ -3522,9 +3589,19 @@ static struct ring_buffer *ring_buffer_get(struct perf_event *event) static void ring_buffer_put(struct ring_buffer *rb) { + struct perf_event *event, *n; + unsigned long flags; + if (!atomic_dec_and_test(&rb->refcount)) return; + spin_lock_irqsave(&rb->event_lock, flags); + list_for_each_entry_safe(event, n, &rb->event_list, rb_entry) { + list_del_init(&event->rb_entry); + wake_up_all(&event->waitq); + } + spin_unlock_irqrestore(&rb->event_lock, flags); + call_rcu(&rb->rcu_head, rb_free_rcu); } @@ -3547,6 +3624,7 @@ static void perf_mmap_close(struct vm_area_struct *vma) atomic_long_sub((size >> PAGE_SHIFT) + 1, &user->locked_vm); vma->vm_mm->pinned_vm -= event->mmap_locked; rcu_assign_pointer(event->rb, NULL); + ring_buffer_detach(event, rb); mutex_unlock(&event->mmap_mutex); ring_buffer_put(rb); @@ -3701,7 +3779,7 @@ static const struct file_operations perf_fops = { void perf_event_wakeup(struct perf_event *event) { - wake_up_all(&event->waitq); + ring_buffer_wakeup(event); if (event->pending_kill) { kill_fasync(&event->fasync, SIGIO, event->pending_kill); @@ -5823,6 +5901,8 @@ perf_event_alloc(struct perf_event_attr *attr, int cpu, INIT_LIST_HEAD(&event->group_entry); INIT_LIST_HEAD(&event->event_entry); INIT_LIST_HEAD(&event->sibling_list); + INIT_LIST_HEAD(&event->rb_entry); + init_waitqueue_head(&event->waitq); init_irq_work(&event->pending, perf_pending_event); @@ -6029,6 +6109,8 @@ set: old_rb = event->rb; rcu_assign_pointer(event->rb, rb); + if (old_rb) + ring_buffer_detach(event, old_rb); ret = 0; unlock: mutex_unlock(&event->mmap_mutex); diff --git a/kernel/events/internal.h b/kernel/events/internal.h index 09097dd8116c..64568a699375 100644 --- a/kernel/events/internal.h +++ b/kernel/events/internal.h @@ -22,6 +22,9 @@ struct ring_buffer { local_t lost; /* nr records lost */ long watermark; /* wakeup watermark */ + /* poll crap */ + spinlock_t event_lock; + struct list_head event_list; struct perf_event_mmap_page *user_page; void *data_pages[0]; diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c index a2a29205cc0f..7f3011c6b57f 100644 --- a/kernel/events/ring_buffer.c +++ b/kernel/events/ring_buffer.c @@ -209,6 +209,9 @@ ring_buffer_init(struct ring_buffer *rb, long watermark, int flags) rb->writable = 1; atomic_set(&rb->refcount, 1); + + INIT_LIST_HEAD(&rb->event_list); + spin_lock_init(&rb->event_lock); } #ifndef CONFIG_PERF_USE_VMALLOC From 52cef189165d74a5d6030184a8e05595194c69ca Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 28 Nov 2011 21:12:40 +0100 Subject: [PATCH 221/364] slab, lockdep: Fix silly bug Commit 30765b92 ("slab, lockdep: Annotate the locks before using them") moves the init_lock_keys() call from after g_cpucache_up = FULL, to before it. And overlooks the fact that init_node_lock_keys() tests for it and ignores everything !FULL. Introduce a LATE stage and change the lockdep test to be Cc: Pekka Enberg Cc: stable@kernel.org Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- mm/slab.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/slab.c b/mm/slab.c index 708efe886154..83311c9aaf9d 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -595,6 +595,7 @@ static enum { PARTIAL_AC, PARTIAL_L3, EARLY, + LATE, FULL } g_cpucache_up; @@ -671,7 +672,7 @@ static void init_node_lock_keys(int q) { struct cache_sizes *s = malloc_sizes; - if (g_cpucache_up != FULL) + if (g_cpucache_up < LATE) return; for (s = malloc_sizes; s->cs_size != ULONG_MAX; s++) { @@ -1666,6 +1667,8 @@ void __init kmem_cache_init_late(void) { struct kmem_cache *cachep; + g_cpucache_up = LATE; + /* Annotate slab for lockdep -- annotate the malloc caches */ init_lock_keys(); From 69682b625a043b567873e6cda397969b502f0054 Mon Sep 17 00:00:00 2001 From: Mitsuo Hayasaka Date: Tue, 29 Nov 2011 15:08:21 +0900 Subject: [PATCH 222/364] x86: Add user_mode_vm check in stack_overflow_check The kernel stack overflow is checked in stack_overflow_check(), which may wrongly detect the overflow if the stack pointer in user space points to the kernel stack intentionally or accidentally. So, the actual overflow is never detected after this misdetection because WARN_ONCE() is used on the detection of it. This patch adds user-mode-vm checking before it to avoid this problem and bails out early if the user stack is used. Signed-off-by: Mitsuo Hayasaka Cc: yrl.pp-manager.tt@hitachi.com Cc: Randy Dunlap Link: http://lkml.kernel.org/r/20111129060821.11076.55315.stgit@ltc219.sdl.hitachi.co.jp Signed-off-by: Ingo Molnar Cc: "H. Peter Anvin" --- arch/x86/kernel/irq_64.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index acf8fbf8fbda..69bca468c47a 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -38,6 +38,9 @@ static inline void stack_overflow_check(struct pt_regs *regs) #ifdef CONFIG_DEBUG_STACKOVERFLOW u64 curbase = (u64)task_stack_page(current); + if (user_mode_vm(regs)) + return; + WARN_ONCE(regs->sp >= curbase && regs->sp <= curbase + THREAD_SIZE && regs->sp < curbase + sizeof(struct thread_info) + From b495e039b4ce2ce4a96b3006004faf082f4d50e2 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Nov 2011 15:00:58 -0600 Subject: [PATCH 223/364] x86, UV: Fix UV2 hub part number There was a mixup when the SGI UV2 hub chip was sent to be fabricated, and it ended up with the wrong part number in the HRP_NODE_ID mmr. Future versions of the chip will (may) have the correct part number. Change the UV infrastructure to recognize both part numbers as valid IDs of a UV2 hub chip. Signed-off-by: Jack Steiner Link: http://lkml.kernel.org/r/20111129210058.GA20452@sgi.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/uv/uv_mmrs.h | 1 + arch/x86/kernel/apic/x2apic_uv_x.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index 10474fb1185d..cf1d73643f60 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -57,6 +57,7 @@ #define UV1_HUB_PART_NUMBER 0x88a5 #define UV2_HUB_PART_NUMBER 0x8eb8 +#define UV2_HUB_PART_NUMBER_X 0x1111 /* Compat: if this #define is present, UV headers support UV2 */ #define UV2_HUB_IS_SUPPORTED 1 diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 62ae3001ae02..9d59bbacd4e3 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -93,6 +93,8 @@ static int __init early_get_pnodeid(void) if (node_id.s.part_number == UV2_HUB_PART_NUMBER) uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1; + if (node_id.s.part_number == UV2_HUB_PART_NUMBER_X) + uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1; uv_hub_info->hub_revision = uv_min_hub_revision_id; pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1); From 8f9a0981aca6bd454ef2a4bdac510af0f6e55bd4 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 15 Nov 2011 01:42:06 +0530 Subject: [PATCH 224/364] ARM: davinci: psc: fix incorrect mask There are 5 LSB bits defined in PDSTAT and the code currently uses a mask of 1 bit to check the status. Use a proper mask per the hardware specification. While at it, use a #define for the mask to improve readability. Reviewed-by: Sergei Shtylyov Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/include/mach/psc.h | 1 + arch/arm/mach-davinci/psc.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index fa59c097223d..8bf279a88b4b 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -244,6 +244,7 @@ #define PSC_STATE_ENABLE 3 #define MDSTAT_STATE_MASK 0x3f +#define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 1fb6bdff38c1..a0e17707c981 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -80,7 +80,7 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, __raw_writel(mdctl, psc_base + MDCTL + 4 * id); pdstat = __raw_readl(psc_base + PDSTAT); - if ((pdstat & 0x00000001) == 0) { + if ((pdstat & PDSTAT_STATE_MASK) == 0) { pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; __raw_writel(pdctl1, psc_base + PDCTL1); From 78b838252fa986f66c7ec8047726ea500a08d98f Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 15 Nov 2011 01:42:07 +0530 Subject: [PATCH 225/364] ARM: davinci: psc: fix incorrect offsets Seperate PDSTAT and PDCTL registers are defined for domain 0 and domain 1 where as the code always reads the domain 0 PDSTAT register and domain 1 PDCTL register. Fix this issue. While at it, introduce usage of macros for register masks to improve readability. Reviewed-by: Sergei Shtylyov Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/include/mach/psc.h | 4 +++- arch/arm/mach-davinci/psc.c | 16 ++++++++-------- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 8bf279a88b4b..8bc3fc256171 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -233,7 +233,7 @@ #define PTCMD 0x120 #define PTSTAT 0x128 #define PDSTAT 0x200 -#define PDCTL1 0x304 +#define PDCTL 0x300 #define MDSTAT 0x800 #define MDCTL 0xA00 @@ -246,6 +246,8 @@ #define MDSTAT_STATE_MASK 0x3f #define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) +#define PDCTL_NEXT BIT(1) +#define PDCTL_EPCGOOD BIT(8) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index a0e17707c981..d7e210f4b55c 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, bool enable, u32 flags) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl; void __iomem *psc_base; struct davinci_soc_info *soc_info = &davinci_soc_info; u32 next_state = PSC_STATE_ENABLE; @@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, mdctl |= MDCTL_FORCE; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = __raw_readl(psc_base + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain); if ((pdstat & PDSTAT_STATE_MASK) == 0) { - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x1; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_NEXT; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); @@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x100; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_EPCGOOD; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); } else { ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); From 9ab409e402cbfde11e2516be43921954db480f4d Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Tue, 15 Nov 2011 01:42:08 +0530 Subject: [PATCH 226/364] ARM: davinci: dm646x does not have a DSP domain Fix the incorrect classification of DSP clock into a seperate DSP domain on DM646x. Per the reference guide (http://www.ti.com/lit/ug/spruep9e/spruep9e.pdf) there is only one "AlwaysON" power domain on DM6467. Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm646x.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 0b68ed534f8e..af27c130595f 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -161,7 +161,6 @@ static struct clk dsp_clk = { .name = "dsp", .parent = &pll1_sysclk1, .lpsc = DM646X_LPSC_C64X_CPU, - .flags = PSC_DSP, .usecount = 1, /* REVISIT how to disable? */ }; From 83713fc9373be2e943f82e9d36213708c6b0050e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 14 Nov 2011 19:20:49 +0100 Subject: [PATCH 227/364] ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_mode The function setup_vpif_input_channel_mode() used the VSCLKDIS register instead of VIDCLKCTL. This meant that when in HD mode videoport channel 0 used a different clock from channel 1. Clearly a copy-and-paste error. Signed-off-by: Hans Verkuil Acked-by: Manjunath Hadli Signed-off-by: Sekhar Nori Cc: stable@kernel.org --- arch/arm/mach-davinci/board-dm646x-evm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index e574d7f837a8..635bf7740157 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) int val; u32 value; - if (!vpif_vsclkdis_reg || !cpld_client) + if (!vpif_vidclkctl_reg || !cpld_client) return -ENXIO; val = i2c_smbus_read_byte(cpld_client); @@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) return val; spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vsclkdis_reg); + value = __raw_readl(vpif_vidclkctl_reg); if (mux_mode) { val &= VPIF_INPUT_TWO_CHANNEL; value |= VIDCH1CLK; @@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) val |= VPIF_INPUT_ONE_CHANNEL; value &= ~VIDCH1CLK; } - __raw_writel(value, vpif_vsclkdis_reg); + __raw_writel(value, vpif_vidclkctl_reg); spin_unlock_irqrestore(&vpif_reg_lock, flags); err = i2c_smbus_write_byte(cpld_client, val); From f1b21c525693b0159aed83b5871f2d0f077f208e Mon Sep 17 00:00:00 2001 From: "Manjunathappa, Prakash" Date: Thu, 10 Nov 2011 11:43:21 +0530 Subject: [PATCH 228/364] ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0 On OMAP-L138 platform, EDMA event queue 0 should be used for audio transfers so that they are not starved by video data moving on event queue 1. Commit 48519f0ae03bc7e86b3dc93e56f1334d53803770 (ASoC: davinci: let platform data define edma queue numbers) had a side-effect of changing this behavior by making the driver actually honor the platform data passed. Fix this now by passing event queue 0 as the queue to be used for audio transfers. Signed-off-by: Manjunathappa, Prakash Signed-off-by: Sekhar Nori Cc: # v2.6.36.x and above --- arch/arm/mach-davinci/board-da850-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1d7d24995226..6659a90dbcad 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = { .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), .tdm_slots = 2, .serial_dir = da850_iis_serializer_direction, - .asp_chan_q = EVENTQ_1, + .asp_chan_q = EVENTQ_0, .version = MCASP_VERSION_2, .txnumevt = 1, .rxnumevt = 1, From 45fc4cce939adc883fba5e02f1f3e0e9ff020c30 Mon Sep 17 00:00:00 2001 From: "Shankarmurthy,Akshay" Date: Wed, 9 Nov 2011 17:55:20 +0530 Subject: [PATCH 229/364] ARM: davinci: dm365 evm: align nand partition table to u-boot Current partition information maintained in kernel does not match with u-boot, this leads to corruption of u-boot env when we update uImage from kernel. Patch fixes it to match with u-boot partition information. Signed-off-by: Shankarmurthy,Akshay Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-dm365-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1918ae711428..46e1f4173b97 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = { /* UBL (a few copies) plus U-Boot */ .name = "bootloader", .offset = 0, - .size = 28 * NAND_BLOCK_SIZE, + .size = 30 * NAND_BLOCK_SIZE, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { /* U-Boot environment */ From 6be30bb7d7504ec687a65c9bbdae8d1d2f8eaa19 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 16 Nov 2011 00:19:51 +0100 Subject: [PATCH 230/364] x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot Dell OptiPlex 990 is known to require PCI reboot, so add it to the reboot blacklist in pci_reboot_dmi_table[]. Signed-off-by: Rafael J. Wysocki Link: http://lkml.kernel.org/r/201111160019.51303.rjw@sisk.pl Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index e334be1182b9..4463d2fee4e3 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -443,6 +443,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"), }, }, + { /* Handle problems with rebooting on the OptiPlex 990. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 990", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), + }, + }, { } }; From 48bc5562103412590e4487b666b49e7b6c84ba44 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Wed, 16 Nov 2011 16:07:22 +0000 Subject: [PATCH 231/364] x86,mrst: Power control commands update On the Intel MID devices SCU commands are issued to manage power off and the like. We need to issue different ones for non-Lincroft based devices. Signed-off-by: Alek Du Signed-off-by: Jacob Pan Signed-off-by: Alan Cox Signed-off-by: Ingo Molnar --- arch/x86/include/asm/intel_scu_ipc.h | 12 ++++++++---- arch/x86/platform/mrst/mrst.c | 25 ++++++++++++++----------- 2 files changed, 22 insertions(+), 15 deletions(-) diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h index 4420993acc47..925b605eb5c6 100644 --- a/arch/x86/include/asm/intel_scu_ipc.h +++ b/arch/x86/include/asm/intel_scu_ipc.h @@ -3,11 +3,15 @@ #include -#define IPCMSG_VRTC 0xFA /* Set vRTC device */ +#define IPCMSG_WARM_RESET 0xF0 +#define IPCMSG_COLD_RESET 0xF1 +#define IPCMSG_SOFT_RESET 0xF2 +#define IPCMSG_COLD_BOOT 0xF3 -/* Command id associated with message IPCMSG_VRTC */ -#define IPC_CMD_VRTC_SETTIME 1 /* Set time */ -#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */ +#define IPCMSG_VRTC 0xFA /* Set vRTC device */ + /* Command id associated with message IPCMSG_VRTC */ + #define IPC_CMD_VRTC_SETTIME 1 /* Set time */ + #define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */ /* Read single register */ int intel_scu_ipc_ioread8(u16 addr, u8 *data); diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index b1489a06a49d..fedc3d7ffa77 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -76,6 +76,20 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; EXPORT_SYMBOL_GPL(sfi_mrtc_array); int sfi_mrtc_num; +static void mrst_power_off(void) +{ + if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) + intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1); +} + +static void mrst_reboot(void) +{ + if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) + intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0); + else + intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0); +} + /* parse all the mtimer info to a static mtimer array */ static int __init sfi_parse_mtmr(struct sfi_table_header *table) { @@ -265,17 +279,6 @@ static int mrst_i8042_detect(void) return 0; } -/* Reboot and power off are handled by the SCU on a MID device */ -static void mrst_power_off(void) -{ - intel_scu_ipc_simple_command(0xf1, 1); -} - -static void mrst_reboot(void) -{ - intel_scu_ipc_simple_command(0xf1, 0); -} - /* * Moorestown does not have external NMI source nor port 0x61 to report * NMI status. The possible NMI sources are from pmu as a result of NMI From 28744b3e9c85ea281d6371d4914c2498bceec10c Mon Sep 17 00:00:00 2001 From: Jekyll Lai Date: Wed, 16 Nov 2011 18:01:20 +0000 Subject: [PATCH 232/364] mrst: Added some platform data for the SFI translations Add SFI glue for the following devices: tca6416: a gpio expander compatible with max7315 mpu3050: gyro sensor Both of these actual drivers are already upstream Signed-off-by: Jekyll Lai Signed-off-by: Alan Cox Signed-off-by: Ingo Molnar --- arch/x86/platform/mrst/mrst.c | 42 +++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index fedc3d7ffa77..940a0807a5ca 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -487,6 +487,46 @@ static void __init *max7315_platform_data(void *info) return max7315; } +static void *tca6416_platform_data(void *info) +{ + static struct pca953x_platform_data tca6416; + struct i2c_board_info *i2c_info = info; + int gpio_base, intr; + char base_pin_name[SFI_NAME_LEN + 1]; + char intr_pin_name[SFI_NAME_LEN + 1]; + + strcpy(i2c_info->type, "tca6416"); + strcpy(base_pin_name, "tca6416_base"); + strcpy(intr_pin_name, "tca6416_int"); + + gpio_base = get_gpio_by_name(base_pin_name); + intr = get_gpio_by_name(intr_pin_name); + + if (gpio_base == -1) + return NULL; + tca6416.gpio_base = gpio_base; + if (intr != -1) { + i2c_info->irq = intr + MRST_IRQ_OFFSET; + tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET; + } else { + i2c_info->irq = -1; + tca6416.irq_base = -1; + } + return &tca6416; +} + +static void *mpu3050_platform_data(void *info) +{ + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("mpu3050_int"); + + if (intr == -1) + return NULL; + + i2c_info->irq = intr + MRST_IRQ_OFFSET; + return NULL; +} + static void __init *emc1403_platform_data(void *info) { static short intr2nd_pdata; @@ -652,9 +692,11 @@ static const struct devs_id __initconst device_ids[] = { {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, + {"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data}, {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data}, {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data}, {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, + {"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data}, /* MSIC subdevices */ {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data}, From efa221268566c2caa0e2a540068a2e8250fbb819 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 16 Nov 2011 18:32:34 +0000 Subject: [PATCH 233/364] x86, mrst: Change the pmic_gpio device type to IPC In latest firmware's SFI tables, pmic_gpio has been set to IPC type of device, so we need handle it too. Signed-off-by: Feng Tang Signed-off-by: Alan Cox Signed-off-by: Ingo Molnar --- arch/x86/platform/mrst/mrst.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 940a0807a5ca..ad4ec1cb097e 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -689,6 +689,7 @@ static void *msic_ocd_platform_data(void *info) static const struct devs_id __initconst device_ids[] = { {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data}, {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, + {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data}, {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, From 9e6866686bdf2dcf3aeb0838076237ede532dcc8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Sun, 25 Sep 2011 15:29:00 -0600 Subject: [PATCH 234/364] x86/mpparse: Account for bus types other than ISA and PCI In commit f8924e770e04 ("x86: unify mp_bus_info"), the 32-bit and 64-bit versions of MP_bus_info were rearranged to match each other better. Unfortunately it introduced a regression: prior to that change we used to always set the mp_bus_not_pci bit, then clear it if we found a PCI bus. After it, we set mp_bus_not_pci for ISA buses, clear it for PCI buses, and leave it alone otherwise. In the cases of ISA and PCI, there's not much difference. But ISA is not the only non-PCI bus, so it's better to always set mp_bus_not_pci and clear it only for PCI. Without this change, Dan's Dell PowerEdge 4200 panics on boot with a log indicating interrupt routing trouble unless the "noapic" option is supplied. With this change, the machine boots reliably without "noapic". Fixes http://bugs.debian.org/586494 Reported-bisected-and-tested-by: Dan McGrath Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org # 2.6.26+ Cc: Dan McGrath Cc: Alexey Starikovskiy [jrnieder@gmail.com: clarified commit message] Signed-off-by: Jonathan Nieder Link: http://lkml.kernel.org/r/20111122215000.GA9151@elie.hsd1.il.comcast.net Signed-off-by: Ingo Molnar --- arch/x86/kernel/mpparse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 9103b89c145a..0741b062a304 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -95,8 +95,8 @@ static void __init MP_bus_info(struct mpc_bus *m) } #endif + set_bit(m->busid, mp_bus_not_pci); if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) { - set_bit(m->busid, mp_bus_not_pci); #if defined(CONFIG_EISA) || defined(CONFIG_MCA) mp_bus_id_to_type[m->busid] = MP_BUS_ISA; #endif From 644ddf588f5dba34df483a6ea8abe639cc102289 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Tue, 18 Oct 2011 13:24:10 -0400 Subject: [PATCH 235/364] Add TAINT_FIRMWARE_WORKAROUND on MTRR fixup TAINT_FIRMWARE_WORKAROUND should be set when an MTRR fixup is done. Signed-off-by: Prarit Bhargava Acked-by: David Rientjes Link: http://lkml.kernel.org/r/1318958650-12447-1-git-send-email-prarit@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index a71efcdbb092..e1fe7f42e0fb 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -547,6 +547,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, if (tmp != mask_lo) { printk(KERN_WARNING "mtrr: your BIOS has configured an incorrect mask, fixing it.\n"); + add_taint(TAINT_FIRMWARE_WORKAROUND); mask_lo = tmp; } } From bd399063976c6c7a09beb4730ed1d93cadbcc739 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Mon, 7 Nov 2011 18:05:32 +0530 Subject: [PATCH 236/364] x86, microcode: Fix the failure path of microcode update driver init code The microcode update driver's initialization code does not handle failures correctly. This patch fixes this issue. Signed-off-by: Jan Beulich Signed-off-by: Srivatsa S. Bhat Link: http://lkml.kernel.org/r/20111107123530.12164.31227.stgit@srivatsabhat.in.ibm.com Link: http://lkml.kernel.org/r/4ED8E2270200007800065120@nat28.tlf.novell.com Signed-off-by: Borislav Petkov --- arch/x86/kernel/microcode_core.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index f2d2a664e797..9d46f5e43b51 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -256,7 +256,7 @@ static int __init microcode_dev_init(void) return 0; } -static void microcode_dev_exit(void) +static void __exit microcode_dev_exit(void) { misc_deregister(µcode_dev); } @@ -519,10 +519,8 @@ static int __init microcode_init(void) microcode_pdev = platform_device_register_simple("microcode", -1, NULL, 0); - if (IS_ERR(microcode_pdev)) { - microcode_dev_exit(); + if (IS_ERR(microcode_pdev)) return PTR_ERR(microcode_pdev); - } get_online_cpus(); mutex_lock(µcode_mutex); @@ -532,14 +530,12 @@ static int __init microcode_init(void) mutex_unlock(µcode_mutex); put_online_cpus(); - if (error) { - platform_device_unregister(microcode_pdev); - return error; - } + if (error) + goto out_pdev; error = microcode_dev_init(); if (error) - return error; + goto out_sysdev_driver; register_syscore_ops(&mc_syscore_ops); register_hotcpu_notifier(&mc_cpu_notifier); @@ -548,6 +544,20 @@ static int __init microcode_init(void) " , Peter Oruba\n"); return 0; + +out_sysdev_driver: + get_online_cpus(); + mutex_lock(µcode_mutex); + + sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); + + mutex_unlock(µcode_mutex); + put_online_cpus(); + +out_pdev: + platform_device_unregister(microcode_pdev); + return error; + } module_init(microcode_init); From ce37defc0f6673f5ca2c92ed5cfcaf290ae7dd16 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 5 Dec 2011 14:28:37 +0100 Subject: [PATCH 237/364] x86: Document rdmsr_safe restrictions Recently, I got bitten by using rdmsr_safe too early in the boot process. Document its shortcomings for future reference. Link: http://lkml.kernel.org/r/4ED5B70F.606@lwfinger.net Signed-off-by: Borislav Petkov --- arch/x86/include/asm/msr.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index 084ef95274cd..95203d40ffdd 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -169,7 +169,14 @@ static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high) return native_write_msr_safe(msr, low, high); } -/* rdmsr with exception handling */ +/* + * rdmsr with exception handling. + * + * Please note that the exception handling works only after we've + * switched to the "smart" #GP handler in trap_init() which knows about + * exception tables - using this macro earlier than that causes machine + * hangs on boxes which do not implement the @msr in the first argument. + */ #define rdmsr_safe(msr, p1, p2) \ ({ \ int __err; \ From 8dbf4a30033ff61091015f0076e872b5c8f717cc Mon Sep 17 00:00:00 2001 From: Ajaykumar Hotchandani Date: Fri, 11 Nov 2011 18:31:57 +0530 Subject: [PATCH 238/364] x86/mtrr: Resolve inconsistency with Intel processor manual Following is from Notes of section 11.5.3 of Intel processor manual available at: http://www.intel.com/Assets/PDF/manual/325384.pdf For the Pentium 4 and Intel Xeon processors, after the sequence of steps given above has been executed, the cache lines containing the code between the end of the WBINVD instruction and before the MTRRS have actually been disabled may be retained in the cache hierarchy. Here, to remove code from the cache completely, a second WBINVD instruction must be executed after the MTRRs have been disabled. This patch provides resolution for that. Ideally, I will like to make changes only for Pentium 4 and Xeon processors. But, I am not finding easier way to do it. And, extra wbinvd() instruction does not hurt much for other processors. Signed-off-by: Ajaykumar Hotchandani Cc: Linus Torvalds Cc: Arjan van de Ven Cc: Lucas De Marchi Link: http://lkml.kernel.org/r/4EBD1CC5.3030008@oracle.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index e1fe7f42e0fb..97b26356e9ee 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -694,6 +694,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock) /* Disable MTRRs, and set the default type to uncached */ mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi); + wbinvd(); } static void post_set(void) __releases(set_atomicity_lock) From 1ef03890969932e9359b9a4c658f7f87771910ac Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Mon, 5 Dec 2011 16:53:53 +0300 Subject: [PATCH 239/364] x86: Fix "Acer Aspire 1" reboot hang MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like on some Acer Aspire 1s with older bioses, reboot via bios fails. It works on my machine, (with BIOS version 0.3310) but not on some others (BIOS version 0.3309). There's a log of problems at: https://bbs.archlinux.org/viewtopic.php?id=124136 This patch adds a different callback to the reboot quirk table, to allow rebooting via keybaord controller. Reported-by: UroÅ¡ Vampl Tested-by: Vasily Khoruzhick Signed-off-by: Peter Chubb Cc: Don Zickus Cc: Peter Zijlstra Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1323093233-9481-1-git-send-email-anarsoul@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 4463d2fee4e3..37a458b521a6 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -124,7 +124,7 @@ __setup("reboot=", reboot_setup); */ /* - * Some machines require the "reboot=b" commandline option, + * Some machines require the "reboot=b" or "reboot=k" commandline options, * this quirk makes that automatic. */ static int __init set_bios_reboot(const struct dmi_system_id *d) @@ -136,6 +136,15 @@ static int __init set_bios_reboot(const struct dmi_system_id *d) return 0; } +static int __init set_kbd_reboot(const struct dmi_system_id *d) +{ + if (reboot_type != BOOT_KBD) { + reboot_type = BOOT_KBD; + printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident); + } + return 0; +} + static struct dmi_system_id __initdata reboot_dmi_table[] = { { /* Handle problems with rebooting on Dell E520's */ .callback = set_bios_reboot, @@ -295,7 +304,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { }, }, { /* Handle reboot issue on Acer Aspire one */ - .callback = set_bios_reboot, + .callback = set_kbd_reboot, .ident = "Acer Aspire One A110", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), From 2cd1c8d4dc7ecca9e9431e2dabe41ae9c7d89e51 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 15 Nov 2011 14:49:09 -0800 Subject: [PATCH 240/364] x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode Fix an outstanding issue that has been reported since 2.6.37. Under a heavy loaded machine processing "fork()" calls could crash with: BUG: unable to handle kernel paging request at f573fc8c IP: [] swap_count_continued+0x104/0x180 *pdpt = 000000002a3b9027 *pde = 0000000001bed067 *pte = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 1638, comm: apache2 Not tainted 3.0.4-linode37 #1 EIP: 0061:[] EFLAGS: 00210246 CPU: 3 EIP is at swap_count_continued+0x104/0x180 .. snip.. Call Trace: [] ? __swap_duplicate+0xc2/0x160 [] ? pte_mfn_to_pfn+0x87/0xe0 [] ? swap_duplicate+0x14/0x40 [] ? copy_pte_range+0x45b/0x500 [] ? copy_page_range+0x195/0x200 [] ? dup_mmap+0x1c6/0x2c0 [] ? dup_mm+0xa8/0x130 [] ? copy_process+0x98a/0xb30 [] ? do_fork+0x4f/0x280 [] ? getnstimeofday+0x43/0x100 [] ? sys_clone+0x30/0x40 [] ? ptregs_clone+0x15/0x48 [] ? syscall_call+0x7/0xb The problem is that in copy_page_range() we turn lazy mode on, and then in swap_entry_free() we call swap_count_continued() which ends up in: map = kmap_atomic(page, KM_USER0) + offset; and then later we touch *map. Since we are running in batched mode (lazy) we don't actually set up the PTE mappings and the kmap_atomic is not done synchronously and ends up trying to dereference a page that has not been set. Looking at kmap_atomic_prot_pfn(), it uses 'arch_flush_lazy_mmu_mode' and doing the same in kmap_atomic_prot() and __kunmap_atomic() makes the problem go away. Interestingly, commit b8bcfe997e4615 ("x86/paravirt: remove lazy mode in interrupts") removed part of this to fix an interrupt issue - but it went to far and did not consider this scenario. Signed-off-by: Konrad Rzeszutek Wilk Cc: Peter Zijlstra Cc: Jeremy Fitzhardinge Cc: Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/x86/mm/highmem_32.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index b49962662101..f4f29b19fac5 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -45,6 +45,7 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot) vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); BUG_ON(!pte_none(*(kmap_pte-idx))); set_pte(kmap_pte-idx, mk_pte(page, prot)); + arch_flush_lazy_mmu_mode(); return (void *)vaddr; } @@ -88,6 +89,7 @@ void __kunmap_atomic(void *kvaddr) */ kpte_clear_flush(kmap_pte-idx, vaddr); kmap_atomic_idx_pop(); + arch_flush_lazy_mmu_mode(); } #ifdef CONFIG_DEBUG_HIGHMEM else { From a7a280493fb63f8e9fbfc8feec5810bf50e1e54f Mon Sep 17 00:00:00 2001 From: Major Lee Date: Tue, 15 Nov 2011 15:31:23 -0800 Subject: [PATCH 241/364] x86/mrst: Battery fixes When DCDC input line over current detecting, PMIC will change charging current automatically. Logging event is enough. Signed-off-by: Major Lee Signed-off-by: Alan Cox Cc: Mathias Nyman Cc: Feng Tang Cc: "H. Peter Anvin" [fix build] Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- drivers/power/intel_mid_battery.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/intel_mid_battery.c index cffcb7c00b00..01fa671ec97f 100644 --- a/drivers/power/intel_mid_battery.c +++ b/drivers/power/intel_mid_battery.c @@ -61,7 +61,8 @@ MODULE_PARM_DESC(debug, "Flag to enable PMIC Battery debug messages."); #define PMIC_BATT_CHR_SBATDET_MASK (1 << 5) #define PMIC_BATT_CHR_SDCLMT_MASK (1 << 6) #define PMIC_BATT_CHR_SUSBOVP_MASK (1 << 7) -#define PMIC_BATT_CHR_EXCPT_MASK 0xC6 +#define PMIC_BATT_CHR_EXCPT_MASK 0x86 + #define PMIC_BATT_ADC_ACCCHRG_MASK (1 << 31) #define PMIC_BATT_ADC_ACCCHRGVAL_MASK 0x7FFFFFFF @@ -304,11 +305,6 @@ static void pmic_battery_read_status(struct pmic_power_module_info *pbi) pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; pmic_battery_log_event(BATT_EVENT_BATOVP_EXCPT); batt_exception = 1; - } else if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) { - pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; - pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; - pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT); - batt_exception = 1; } else if (r8 & PMIC_BATT_CHR_STEMP_MASK) { pbi->batt_health = POWER_SUPPLY_HEALTH_OVERHEAT; pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING; @@ -316,6 +312,10 @@ static void pmic_battery_read_status(struct pmic_power_module_info *pbi) batt_exception = 1; } else { pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD; + if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) { + /* PMIC will change charging current automatically */ + pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT); + } } } From 35d476996288af6a4aaa8b172bcd31decd233de7 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 15 Nov 2011 14:46:52 -0800 Subject: [PATCH 242/364] x86/rtc, mrst: Don't register a platform RTC device for for Intel MID platforms Intel MID x86 platforms have a memory mapped virtual RTC instead. No MID platform have the default ports (and accessing them may do weird stuff). Signed-off-by: Mathias Nyman Signed-off-by: Alan Cox Cc: feng.tang@intel.com Cc: Feng Tang Cc: "H. Peter Anvin" Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mrst.h | 9 +++++++++ arch/x86/kernel/rtc.c | 5 +++++ 2 files changed, 14 insertions(+) diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h index e6283129c821..93f79094c224 100644 --- a/arch/x86/include/asm/mrst.h +++ b/arch/x86/include/asm/mrst.h @@ -31,11 +31,20 @@ enum mrst_cpu_type { }; extern enum mrst_cpu_type __mrst_cpu_chip; + +#ifdef CONFIG_X86_INTEL_MID + static inline enum mrst_cpu_type mrst_identify_cpu(void) { return __mrst_cpu_chip; } +#else /* !CONFIG_X86_INTEL_MID */ + +#define mrst_identify_cpu() (0) + +#endif /* !CONFIG_X86_INTEL_MID */ + enum mrst_timer_options { MRST_TIMER_DEFAULT, MRST_TIMER_APBT_ONLY, diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 348ce016a835..af6db6ec5b2a 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -12,6 +12,7 @@ #include #include #include +#include #ifdef CONFIG_X86_32 /* @@ -242,6 +243,10 @@ static __init int add_rtc_cmos(void) if (of_have_populated_dt()) return 0; + /* Intel MID platforms don't have ioport rtc */ + if (mrst_identify_cpu()) + return -ENODEV; + platform_device_register(&rtc_device); dev_info(&rtc_device.dev, "registered platform RTC device (no PNP device found)\n"); From 38f6ae1e1b0d5e8b0a95f88c1eee2c5e8b001631 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 2 Dec 2011 09:38:33 +1100 Subject: [PATCH 243/364] perf stat: Failure with "Operation not supported" perf stat is failing on PowerPC: Error: open_counter returned with 95 (Operation not supported). /bin/dmesg may provide additional information. Fatal: Not all events could be opened. commit 370faf1dd046 (perf stat: Fail softly on unsupported events) added a check for failure returning ENOENT, but the POWER backend returns EOPNOTSUPP. It looks like alpha, blackfin and mips do the same. With the patch applied, things work as expected: Performance counter stats for '/bin/true': 0.362176 task-clock # 0.623 CPUs utilized 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 28 page-faults # 0.077 M/sec 1,677,020 cycles # 4.630 GHz stalled-cycles-frontend stalled-cycles-backend 431,220 instructions # 0.26 insns per cycle 101,889 branches # 281.325 M/sec 4,145 branch-misses # 4.07% of all branches 0.000581361 seconds time elapsed Cc: # 3.0+ Cc: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20111202093833.5fef7226@kryten Signed-off-by: Anton Blanchard Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-stat.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 7d98676808d8..955930e0a5c3 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -463,7 +463,8 @@ static int run_perf_stat(int argc __used, const char **argv) list_for_each_entry(counter, &evsel_list->entries, node) { if (create_perf_stat_counter(counter, first) < 0) { - if (errno == EINVAL || errno == ENOSYS || errno == ENOENT) { + if (errno == EINVAL || errno == ENOSYS || + errno == ENOENT || errno == EOPNOTSUPP) { if (verbose) ui__warning("%s event is not supported by the kernel.\n", event_name(counter)); From 8360ee2f74bda2b794bdf4e23ab19d8b4e93807f Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 21 Nov 2011 12:10:19 +0100 Subject: [PATCH 244/364] x86, AMD: Correct align_va_addr documentation Commit dfb09f9b7ab0 ("x86, amd: Avoid cache aliasing penalties on AMD family 15h") introduced a kernel command line parameter called 'align_va_addr' which still refers to arguments used in an earlier version of the patch and which got changed without updating the documentation. Correct that omission. Signed-off-by: Borislav Petkov Cc: Frank Arnold Link: http://lkml.kernel.org/r/1321873819-29541-1-git-send-email-bp@amd64.org Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a0c5c5f4fce6..5e22c3f1f8bd 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -315,8 +315,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. CPU-intensive style benchmark, and it can vary highly in a microbenchmark depending on workload and compiler. - 1: only for 32-bit processes - 2: only for 64-bit processes + 32: only for 32-bit processes + 64: only for 64-bit processes on: enable for both 32- and 64-bit processes off: disable for both 32- and 64-bit processes From f62ef5f3e9cff065aa845e2b7f487e1810b8e57e Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 2 Dec 2011 08:21:43 +0100 Subject: [PATCH 245/364] x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions I've received complaints that the numa_node attribute for family 15h model 00-0fh (e.g. Interlagos) northbridge functions shows -1 instead of the proper node ID. Correct this with attached quirks (similar to quirks for other AMD CPU families used in multi-socket systems). Signed-off-by: Andreas Herrmann Cc: Frank Arnold Cc: Borislav Petkov Link: http://lkml.kernel.org/r/20111202072143.GA31916@alberich.amd.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/quirks.c | 13 +++++++++++++ include/linux/pci_ids.h | 4 ++++ 2 files changed, 17 insertions(+) diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index b78643d0f9a5..03920a15a632 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -553,4 +553,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC, quirk_amd_nb_node); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK, quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5, + quirk_amd_nb_node); + #endif diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 172ba70306d1..2aaee0ca9da8 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -517,8 +517,12 @@ #define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302 #define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 #define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 +#define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600 +#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 +#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 #define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603 #define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604 +#define PCI_DEVICE_ID_AMD_15H_NB_F5 0x1605 #define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703 #define PCI_DEVICE_ID_AMD_LANCE 0x2000 #define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 From c8f369ab6003a2df3cdae30f9aba641a4a606034 Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Wed, 26 Oct 2011 18:45:39 +0300 Subject: [PATCH 246/364] intel-iommu: Fix section mismatch in dmar_parse_rmrr_atsr_dev() dmar_parse_rmrr_atsr_dev() calls rmrr_parse_dev() and atsr_parse_dev() which are both marked as __init. Section mismatch in reference from the function dmar_parse_rmrr_atsr_dev() to the function .init.text:dmar_parse_dev_scope() The function dmar_parse_rmrr_atsr_dev() references the function __init dmar_parse_dev_scope(). Section mismatch in reference from the function dmar_parse_rmrr_atsr_dev() to the function .init.text:dmar_parse_dev_scope() The function dmar_parse_rmrr_atsr_dev() references the function __init dmar_parse_dev_scope(). Signed-off-by: Sergey Senozhatsky Cc: David Woodhouse Cc: iommu@lists.linux-foundation.org Cc: Joerg Roedel Cc: Ohad Ben-Cohen Link: http://lkml.kernel.org/r/20111026154539.GA10103@swordfish Signed-off-by: Ingo Molnar --- drivers/iommu/intel-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index c0c7820d4c46..a004c3945c67 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -3524,7 +3524,7 @@ found: return 0; } -int dmar_parse_rmrr_atsr_dev(void) +int __init dmar_parse_rmrr_atsr_dev(void) { struct dmar_rmrr_unit *rmrr, *rmrr_n; struct dmar_atsr_unit *atsr, *atsr_n; From 61ed26e388ac67da262bb1a95d0474e4cabd4b0d Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Wed, 26 Oct 2011 19:15:07 +0300 Subject: [PATCH 247/364] intr_remapping: Fix section mismatch in ir_dev_scope_init() Fix: Section mismatch in reference from the function ir_dev_scope_init() to the function .init.text:dmar_dev_scope_init() The function ir_dev_scope_init() references the function __init dmar_dev_scope_init(). Signed-off-by: Sergey Senozhatsky Cc: Suresh Siddha Cc: Youquan Song Cc: Ohad Ben-Cohen Link: http://lkml.kernel.org/r/20111026161507.GB10103@swordfish Signed-off-by: Ingo Molnar --- drivers/iommu/intr_remapping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/intr_remapping.c b/drivers/iommu/intr_remapping.c index 07c9f189f314..6777ca049471 100644 --- a/drivers/iommu/intr_remapping.c +++ b/drivers/iommu/intr_remapping.c @@ -773,7 +773,7 @@ int __init parse_ioapics_under_ir(void) return ir_supported; } -int ir_dev_scope_init(void) +int __init ir_dev_scope_init(void) { if (!intr_remapping_enabled) return 0; From 6560ee07dc946e94f7cc2cd8e3b5a5f5ee7340c1 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:13:02 +0100 Subject: [PATCH 248/364] ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram Otherwise timing is inaccurate, resulting in devices which depend on it, like omap-keypad, broken. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 86b2dec11788..9ff90a744a21 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -16,6 +16,8 @@ #include #include +#include +#include #include #include /* for machine_is_* */ @@ -927,7 +929,9 @@ int __init omap1_clk_init(void) void __init omap1_clk_late_init(void) { - if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) + unsigned long rate = ck_dpll1.rate; + + if (rate >= OMAP1_DPLL1_SANE_VALUE) return; /* System booting at unusable rate, force reprogramming of DPLL1 */ @@ -942,4 +946,5 @@ void __init omap1_clk_late_init(void) } propagate_rate(&ck_dpll1); omap1_show_rates(); + loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate); } From 11948b9335865dc0ba3a5ca2c9c255291a8d50fb Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 16 Nov 2011 17:37:45 -0600 Subject: [PATCH 249/364] toshiba_acpi: Fix machines that don't support HCI_SYSTEM_EVENT The Satellite C670-10V generates notifications for hotkeys but does not support HCI_SYSTEM_EVENT. As a result when a hotkey is pressed it gets stuck in an infinite loop in toshiba_acpi_notify. To fix this, detect whether or not HCI_SYSTEM_EVENT is supported up-front and don't try to read system events if it isn't supported. In addition, limit the number of retries when reading HCI_SYSTEM_EVENT fails so that this loop cannot run unbounded. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/platform/x86/toshiba_acpi.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 13ef8c37471d..dcdc1f4a4624 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -121,6 +121,7 @@ struct toshiba_acpi_dev { int illumination_supported:1; int video_supported:1; int fan_supported:1; + int system_event_supported:1; struct mutex mutex; }; @@ -724,7 +725,7 @@ static int keys_proc_show(struct seq_file *m, void *v) u32 hci_result; u32 value; - if (!dev->key_event_valid) { + if (!dev->key_event_valid && dev->system_event_supported) { hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result); if (hci_result == HCI_SUCCESS) { dev->key_event_valid = 1; @@ -964,6 +965,8 @@ static int __devinit toshiba_acpi_add(struct acpi_device *acpi_dev) /* enable event fifo */ hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result); + if (hci_result == HCI_SUCCESS) + dev->system_event_supported = 1; props.type = BACKLIGHT_PLATFORM; props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1; @@ -1032,12 +1035,15 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event) { struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev); u32 hci_result, value; + int retries = 3; - if (event != 0x80) + if (!dev->system_event_supported || event != 0x80) return; + do { hci_read1(dev, HCI_SYSTEM_EVENT, &value, &hci_result); - if (hci_result == HCI_SUCCESS) { + switch (hci_result) { + case HCI_SUCCESS: if (value == 0x100) continue; /* act on key press; ignore key release */ @@ -1049,14 +1055,19 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event) pr_info("Unknown key %x\n", value); } - } else if (hci_result == HCI_NOT_SUPPORTED) { + break; + case HCI_NOT_SUPPORTED: /* This is a workaround for an unresolved issue on * some machines where system events sporadically * become disabled. */ hci_write1(dev, HCI_SYSTEM_EVENT, 1, &hci_result); pr_notice("Re-enabled hotkeys\n"); + /* fall through */ + default: + retries--; + break; } - } while (hci_result != HCI_EMPTY); + } while (retries && hci_result != HCI_EMPTY); } From de398fb8b92eba3447298053a483727bdd5fe37e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 5 Dec 2011 13:21:42 -0500 Subject: [PATCH 250/364] ipv4: Fix peer validation on cached lookup. If ipv4_valdiate_peer() fails during a cached entry lookup, we'll NULL derer since the loop iterator assumes rth is not NULL. Letting this be handled as a failure is just bogus, so just make it not fail. If we have trouble getting a non-NULL neighbour for the redirected gateway, just restore the original gateway and continue. The very next use of this cached route will try again. Reported-by: Dan Carpenter Signed-off-by: David S. Miller --- net/ipv4/route.c | 35 +++++++++++++---------------------- 1 file changed, 13 insertions(+), 22 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 588d971a3ba1..46af62363b8c 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1310,7 +1310,7 @@ static void rt_del(unsigned hash, struct rtable *rt) spin_unlock_bh(rt_hash_lock_addr(hash)); } -static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer) +static void check_peer_redir(struct dst_entry *dst, struct inet_peer *peer) { struct rtable *rt = (struct rtable *) dst; __be32 orig_gw = rt->rt_gateway; @@ -1321,21 +1321,19 @@ static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer) rt->rt_gateway = peer->redirect_learned.a4; n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway); - if (IS_ERR(n)) - return PTR_ERR(n); + if (IS_ERR(n)) { + rt->rt_gateway = orig_gw; + return; + } old_n = xchg(&rt->dst._neighbour, n); if (old_n) neigh_release(old_n); - if (!n || !(n->nud_state & NUD_VALID)) { - if (n) - neigh_event_send(n, NULL); - rt->rt_gateway = orig_gw; - return -EAGAIN; + if (!(n->nud_state & NUD_VALID)) { + neigh_event_send(n, NULL); } else { rt->rt_flags |= RTCF_REDIRECTED; call_netevent_notifiers(NETEVENT_NEIGH_UPDATE, n); } - return 0; } /* called in rcu_read_lock() section */ @@ -1693,7 +1691,7 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu) } -static struct rtable *ipv4_validate_peer(struct rtable *rt) +static void ipv4_validate_peer(struct rtable *rt) { if (rt->rt_peer_genid != rt_peer_genid()) { struct inet_peer *peer; @@ -1708,15 +1706,12 @@ static struct rtable *ipv4_validate_peer(struct rtable *rt) if (peer->redirect_genid != redirect_genid) peer->redirect_learned.a4 = 0; if (peer->redirect_learned.a4 && - peer->redirect_learned.a4 != rt->rt_gateway) { - if (check_peer_redir(&rt->dst, peer)) - return NULL; - } + peer->redirect_learned.a4 != rt->rt_gateway) + check_peer_redir(&rt->dst, peer); } rt->rt_peer_genid = rt_peer_genid(); } - return rt; } static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) @@ -1725,7 +1720,7 @@ static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie) if (rt_is_expired(rt)) return NULL; - dst = (struct dst_entry *) ipv4_validate_peer(rt); + ipv4_validate_peer(rt); return dst; } @@ -2380,9 +2375,7 @@ int ip_route_input_common(struct sk_buff *skb, __be32 daddr, __be32 saddr, rth->rt_mark == skb->mark && net_eq(dev_net(rth->dst.dev), net) && !rt_is_expired(rth)) { - rth = ipv4_validate_peer(rth); - if (!rth) - continue; + ipv4_validate_peer(rth); if (noref) { dst_use_noref(&rth->dst, jiffies); skb_dst_set_noref(skb, &rth->dst); @@ -2758,9 +2751,7 @@ struct rtable *__ip_route_output_key(struct net *net, struct flowi4 *flp4) (IPTOS_RT_MASK | RTO_ONLINK)) && net_eq(dev_net(rth->dst.dev), net) && !rt_is_expired(rth)) { - rth = ipv4_validate_peer(rth); - if (!rth) - continue; + ipv4_validate_peer(rth); dst_use(&rth->dst, jiffies); RT_CACHE_STAT_INC(out_hit); rcu_read_unlock_bh(); From cb59974742aea24adf6637eb0c4b8e7b48bca6fb Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 31 Oct 2011 11:07:42 +0200 Subject: [PATCH 251/364] tracing: fix event_subsystem ref counting Fix a bug introduced by e9dbfae5, which prevents event_subsystem from ever being released. Ref_count was added to keep track of subsystem users, not for counting events. Subsystem is created with ref_count = 1, so there is no need to increment it for every event, we have nr_events for that. Fix this by touching ref_count only when we actually have a new user - subsystem_open(). Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.com Signed-off-by: Steven Rostedt --- kernel/trace/trace_events.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index 581876f9f387..c212a7f934ec 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -1078,7 +1078,6 @@ event_subsystem_dir(const char *name, struct dentry *d_events) /* First see if we did not already create this dir */ list_for_each_entry(system, &event_subsystems, list) { if (strcmp(system->name, name) == 0) { - __get_system(system); system->nr_events++; return system->entry; } From 27b14b56af081ec7edeefb3a38b2c9577cc5ef48 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 1 Nov 2011 09:09:35 +0800 Subject: [PATCH 252/364] tracing: Restore system filter behavior Though not all events have field 'prev_pid', it was allowed to do this: # echo 'prev_pid == 100' > events/sched/filter but commit 75b8e98263fdb0bfbdeba60d4db463259f1fe8a2 (tracing/filter: Swap entire filter of events) broke it without any reason. Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.com Signed-off-by: Li Zefan Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 2 ++ kernel/trace/trace_events_filter.c | 7 ++++++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 96efa6794ea5..c3da42dd22ba 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -172,6 +172,7 @@ enum { TRACE_EVENT_FL_FILTERED_BIT, TRACE_EVENT_FL_RECORDED_CMD_BIT, TRACE_EVENT_FL_CAP_ANY_BIT, + TRACE_EVENT_FL_NO_SET_FILTER_BIT, }; enum { @@ -179,6 +180,7 @@ enum { TRACE_EVENT_FL_FILTERED = (1 << TRACE_EVENT_FL_FILTERED_BIT), TRACE_EVENT_FL_RECORDED_CMD = (1 << TRACE_EVENT_FL_RECORDED_CMD_BIT), TRACE_EVENT_FL_CAP_ANY = (1 << TRACE_EVENT_FL_CAP_ANY_BIT), + TRACE_EVENT_FL_NO_SET_FILTER = (1 << TRACE_EVENT_FL_NO_SET_FILTER_BIT), }; struct ftrace_event_call { diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c index d6e7926dcd26..95dc31efd6dd 100644 --- a/kernel/trace/trace_events_filter.c +++ b/kernel/trace/trace_events_filter.c @@ -1649,7 +1649,9 @@ static int replace_system_preds(struct event_subsystem *system, */ err = replace_preds(call, NULL, ps, filter_string, true); if (err) - goto fail; + call->flags |= TRACE_EVENT_FL_NO_SET_FILTER; + else + call->flags &= ~TRACE_EVENT_FL_NO_SET_FILTER; } list_for_each_entry(call, &ftrace_events, list) { @@ -1658,6 +1660,9 @@ static int replace_system_preds(struct event_subsystem *system, if (strcmp(call->class->system, system->name) != 0) continue; + if (call->flags & TRACE_EVENT_FL_NO_SET_FILTER) + continue; + filter_item = kzalloc(sizeof(*filter_item), GFP_KERNEL); if (!filter_item) goto fail_mem; From c7c6ec8becaf742b223c7b491f4893014be23a07 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 4 Nov 2011 10:45:23 -0400 Subject: [PATCH 253/364] ftrace: Remove force undef config value left for testing A forced undef of a config value was used for testing and was accidently left in during the final commit. This causes x86 to run slower than needed while running function tracing as well as causes the function graph selftest to fail when DYNMAIC_FTRACE is not set. This is because the code in MCOUNT expects the ftrace code to be processed with the config value set that happened to be forced not set. The forced config option was left in by: commit 6331c28c962561aee59e5a493b7556a4bb585957 ftrace: Fix dynamic selftest failure on some archs Link: http://lkml.kernel.org/r/20111102150255.GA6973@debian Cc: stable@vger.kernel.org Reported-by: Rabin Vincent Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 900b409543db..1276b3ca1598 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -152,7 +152,6 @@ void clear_ftrace_function(void) ftrace_pid_function = ftrace_stub; } -#undef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST #ifndef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST /* * For those archs that do not test ftrace_trace_stop in their From bbbf7af4bf8fc69bc751818cf30521080fa47dcb Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Tue, 18 Oct 2011 19:55:51 +0200 Subject: [PATCH 254/364] jump_label: jump_label_inc may return before the code is patched If cpu A calls jump_label_inc() just after atomic_add_return() is called by cpu B, atomic_inc_not_zero() will return value greater then zero and jump_label_inc() will return to a caller before jump_label_update() finishes its job on cpu B. Link: http://lkml.kernel.org/r/20111018175551.GH17571@redhat.com Cc: stable@vger.kernel.org Cc: Peter Zijlstra Acked-by: Jason Baron Signed-off-by: Gleb Natapov Signed-off-by: Steven Rostedt --- kernel/jump_label.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/jump_label.c b/kernel/jump_label.c index bbdfe2a462a0..66ff7109f697 100644 --- a/kernel/jump_label.c +++ b/kernel/jump_label.c @@ -66,8 +66,9 @@ void jump_label_inc(struct jump_label_key *key) return; jump_label_lock(); - if (atomic_add_return(1, &key->enabled) == 1) + if (atomic_read(&key->enabled) == 0) jump_label_update(key, JUMP_LABEL_ENABLE); + atomic_inc(&key->enabled); jump_label_unlock(); } From d06c27b22aa66e48e32f03f9387328a9af9b0625 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 4 Nov 2011 16:32:25 -0400 Subject: [PATCH 255/364] perf: Fix parsing of __print_flags() in TP_printk() A update is made to the sched:sched_switch event that adds some logic to the first parameter of the __print_flags() that shows the state of tasks. This change cause perf to fail parsing the flags. A simple fix is needed to have the parser be able to process ops within the argument. Cc: stable@vger.kernel.org Reported-by: Andrew Vagin Signed-off-by: Steven Rostedt --- tools/perf/util/trace-event-parse.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c index 0a7ed5b5e281..6c164dc9ee95 100644 --- a/tools/perf/util/trace-event-parse.c +++ b/tools/perf/util/trace-event-parse.c @@ -1537,6 +1537,8 @@ process_flags(struct event *event, struct print_arg *arg, char **tok) field = malloc_or_die(sizeof(*field)); type = process_arg(event, field, &token); + while (type == EVENT_OP) + type = process_op(event, field, &token); if (test_type_token(type, token, EVENT_DELIM, ",")) goto out_free; From ddf6e0e50723b62ac76ed18eb53e9417c6eefba7 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 4 Nov 2011 20:32:39 -0400 Subject: [PATCH 256/364] ftrace: Fix hash record accounting bug If the set_ftrace_filter is cleared by writing just whitespace to it, then the filter hash refcounts will be decremented but not updated. This causes two bugs: 1) No functions will be enabled for tracing when they all should be 2) If the users clears the set_ftrace_filter twice, it will crash ftrace: ------------[ cut here ]------------ WARNING: at /home/rostedt/work/git/linux-trace.git/kernel/trace/ftrace.c:1384 __ftrace_hash_rec_update.part.27+0x157/0x1a7() Modules linked in: Pid: 2330, comm: bash Not tainted 3.1.0-test+ #32 Call Trace: [] warn_slowpath_common+0x83/0x9b [] warn_slowpath_null+0x1a/0x1c [] __ftrace_hash_rec_update.part.27+0x157/0x1a7 [] ? ftrace_regex_release+0xa7/0x10f [] ? kfree+0xe5/0x115 [] ftrace_hash_move+0x2e/0x151 [] ftrace_regex_release+0xba/0x10f [] fput+0xfd/0x1c2 [] filp_close+0x6d/0x78 [] sys_dup3+0x197/0x1c1 [] sys_dup2+0x4f/0x54 [] system_call_fastpath+0x16/0x1b ---[ end trace 77a3a7ee73794a02 ]--- Link: http://lkml.kernel.org/r/20111101141420.GA4918@debian Reported-by: Rabin Vincent Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 1276b3ca1598..b1e8943fed1d 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -1211,7 +1211,9 @@ ftrace_hash_move(struct ftrace_ops *ops, int enable, if (!src->count) { free_ftrace_hash_rcu(*dst); rcu_assign_pointer(*dst, EMPTY_HASH); - return 0; + /* still need to update the function records */ + ret = 0; + goto out; } /* From 145294c359a690b35c62d27dcff28fe892d02aca Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 5 Dec 2011 18:27:25 +0000 Subject: [PATCH 257/364] ASoC: Remove references to corgi and spitz from machine driver document They're not currently actively worked on, the hardware being rather obsolete by now. Signed-off-by: Mark Brown --- Documentation/sound/alsa/soc/machine.txt | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt index 3e2ec9cbf397..d50c14df3411 100644 --- a/Documentation/sound/alsa/soc/machine.txt +++ b/Documentation/sound/alsa/soc/machine.txt @@ -50,8 +50,7 @@ Machine DAI Configuration The machine DAI configuration glues all the codec and CPU DAIs together. It can also be used to set up the DAI system clock and for any machine related DAI initialisation e.g. the machine audio map can be connected to the codec audio -map, unconnected codec pins can be set as such. Please see corgi.c, spitz.c -for examples. +map, unconnected codec pins can be set as such. struct snd_soc_dai_link is used to set up each DAI in your machine. e.g. @@ -83,8 +82,7 @@ Machine Power Map The machine driver can optionally extend the codec power map and to become an audio power map of the audio subsystem. This allows for automatic power up/down of speaker/HP amplifiers, etc. Codec pins can be connected to the machines jack -sockets in the machine init function. See soc/pxa/spitz.c and dapm.txt for -details. +sockets in the machine init function. Machine Controls From 8c9b04346c0ae302d8b7b7df16cc19ddff77742e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 5 Dec 2011 14:47:48 +0100 Subject: [PATCH 258/364] gpio: fix a build failure on KS8695 GPIO I screwed up by compiling that driver for the machine rather than the arch. Correcting this fixes the build error. Cc: Grant Likely Reported-by: Mike Frysinger Signed-off-by: Linus Walleij Signed-off-by: Linus Torvalds --- drivers/gpio/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index dbcb0bcfd8da..4e018d6a7639 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o -obj-$(CONFIG_MACH_KS8695) += gpio-ks8695.o +obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o From 811fd3010cf512f2e23e6c4c912aad54516dc706 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Sun, 4 Dec 2011 20:30:45 +0000 Subject: [PATCH 259/364] r8169: Rx FIFO overflow fixes. Realtek has specified that the post 8168c gigabit chips and the post 8105e fast ethernet chips recover automatically from a Rx FIFO overflow. The driver does not need to clear the RxFIFOOver bit of IntrStatus and it should rather avoid messing it. The implementation deserves some explanation: 1. events outside of the intr_event bit mask are now ignored. It enforces a no-processing policy for the events that either should not be there or should be ignored. 2. RxFIFOOver was already ignored in rtl_cfg_infos[RTL_CFG_1] for the whole 8168 line of chips with two exceptions: - RTL_GIGA_MAC_VER_22 since b5ba6d12bdac21bc0620a5089e0f24e362645efd ("use RxFIFO overflow workaround for 8168c chipset."). This one should now be correctly handled. - RTL_GIGA_MAC_VER_11 (8168b) which requires a different Rx FIFO overflow processing. Though it does not conform to Realtek suggestion above, the updated driver includes no change for RTL_GIGA_MAC_VER_12 and RTL_GIGA_MAC_VER_17. Both are 8168b. RTL_GIGA_MAC_VER_12 is common and a bit old so I'd rather wait for experimental evidence that the change suggested by Realtek really helps or does not hurt in unexpected ways. Removed case statements in rtl8169_interrupt are only 8168 relevant. 3. RxFIFOOver is masked for post 8105e 810x chips, namely the sole 8105e (RTL_GIGA_MAC_VER_30) itself. Signed-off-by: Francois Romieu Cc: hayeswang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 42 +++++++++++----------------- 1 file changed, 17 insertions(+), 25 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 6f06aa10f0d7..7a1e3a69f193 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -1183,11 +1183,13 @@ static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr) return value; } -static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr) +static void rtl8169_irq_mask_and_ack(struct rtl8169_private *tp) { - RTL_W16(IntrMask, 0x0000); + void __iomem *ioaddr = tp->mmio_addr; - RTL_W16(IntrStatus, 0xffff); + RTL_W16(IntrMask, 0x0000); + RTL_W16(IntrStatus, tp->intr_event); + RTL_R8(ChipCmd); } static unsigned int rtl8169_tbi_reset_pending(struct rtl8169_private *tp) @@ -4339,7 +4341,7 @@ static void rtl8169_hw_reset(struct rtl8169_private *tp) void __iomem *ioaddr = tp->mmio_addr; /* Disable interrupts */ - rtl8169_irq_mask_and_ack(ioaddr); + rtl8169_irq_mask_and_ack(tp); rtl_rx_close(tp); @@ -4885,8 +4887,7 @@ static void rtl_hw_start_8168(struct net_device *dev) RTL_W16(IntrMitigate, 0x5151); /* Work around for RxFIFO overflow. */ - if (tp->mac_version == RTL_GIGA_MAC_VER_11 || - tp->mac_version == RTL_GIGA_MAC_VER_22) { + if (tp->mac_version == RTL_GIGA_MAC_VER_11) { tp->intr_event |= RxFIFOOver | PCSTimeout; tp->intr_event &= ~RxOverflow; } @@ -5076,6 +5077,11 @@ static void rtl_hw_start_8101(struct net_device *dev) void __iomem *ioaddr = tp->mmio_addr; struct pci_dev *pdev = tp->pci_dev; + if (tp->mac_version >= RTL_GIGA_MAC_VER_30) { + tp->intr_event &= ~RxFIFOOver; + tp->napi_event &= ~RxFIFOOver; + } + if (tp->mac_version == RTL_GIGA_MAC_VER_13 || tp->mac_version == RTL_GIGA_MAC_VER_16) { int cap = pci_pcie_cap(pdev); @@ -5342,7 +5348,7 @@ static void rtl8169_wait_for_quiescence(struct net_device *dev) /* Wait for any pending NAPI task to complete */ napi_disable(&tp->napi); - rtl8169_irq_mask_and_ack(ioaddr); + rtl8169_irq_mask_and_ack(tp); tp->intr_mask = 0xffff; RTL_W16(IntrMask, tp->intr_event); @@ -5804,6 +5810,10 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) */ status = RTL_R16(IntrStatus); while (status && status != 0xffff) { + status &= tp->intr_event; + if (!status) + break; + handled = 1; /* Handle all of the error cases first. These will reset @@ -5818,27 +5828,9 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) switch (tp->mac_version) { /* Work around for rx fifo overflow */ case RTL_GIGA_MAC_VER_11: - case RTL_GIGA_MAC_VER_22: - case RTL_GIGA_MAC_VER_26: netif_stop_queue(dev); rtl8169_tx_timeout(dev); goto done; - /* Testers needed. */ - case RTL_GIGA_MAC_VER_17: - case RTL_GIGA_MAC_VER_19: - case RTL_GIGA_MAC_VER_20: - case RTL_GIGA_MAC_VER_21: - case RTL_GIGA_MAC_VER_23: - case RTL_GIGA_MAC_VER_24: - case RTL_GIGA_MAC_VER_27: - case RTL_GIGA_MAC_VER_28: - case RTL_GIGA_MAC_VER_31: - /* Experimental science. Pktgen proof. */ - case RTL_GIGA_MAC_VER_12: - case RTL_GIGA_MAC_VER_25: - if (status == RxFIFOOver) - goto done; - break; default: break; } From c7c2c39be8ed4e503e987151f4599455060e219a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Sun, 4 Dec 2011 20:30:52 +0000 Subject: [PATCH 260/364] r8169: fix Rx index race between FIFO overflow recovery and NAPI handler. Since 92fc43b4159b518f5baae57301f26d770b0834c9, rtl8169_tx_timeout ends up resetting Rx and Tx indexes and thus racing with the NAPI handler via -> rtl8169_hw_reset -> rtl_hw_reset -> rtl8169_init_ring_indexes What about returning to the original state ? rtl_hw_reset is only used by rtl8169_hw_reset and rtl8169_init_one. The latter does not need rtl8169_init_ring_indexes because the indexes still contain their original values from the newly allocated network device private data area (i.e. 0). rtl8169_hw_reset is used by: 1. rtl8169_down Helper for rtl8169_close. rtl8169_open explicitely inits the indexes anyway. 2. rtl8169_pcierr_interrupt Indexes are set by rtl8169_reinit_task. 3. rtl8169_interrupt rtl8169_hw_reset is needed when the device goes down. See 1. 4. rtl_shutdown System shutdown handler. Indexes are irrelevant. 5. rtl8169_reset_task Indexes must be set before rtl_hw_start is called. 6. rtl8169_tx_timeout Indexes should not be set. This is the job of rtl8169_reset_task anyway. The removal of rtl8169_hw_reset in rtl8169_tx_timeout and its move in rtl8169_reset_task do not change the analysis. Signed-off-by: Francois Romieu Cc: hayeswang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 7a1e3a69f193..67bf07819992 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3935,8 +3935,6 @@ static void rtl_hw_reset(struct rtl8169_private *tp) break; udelay(100); } - - rtl8169_init_ring_indexes(tp); } static int __devinit @@ -5395,14 +5393,16 @@ static void rtl8169_reset_task(struct work_struct *work) if (!netif_running(dev)) goto out_unlock; + rtl8169_hw_reset(tp); + rtl8169_wait_for_quiescence(dev); for (i = 0; i < NUM_RX_DESC; i++) rtl8169_mark_to_asic(tp->RxDescArray + i, rx_buf_sz); rtl8169_tx_clear(tp); + rtl8169_init_ring_indexes(tp); - rtl8169_hw_reset(tp); rtl_hw_start(dev); netif_wake_queue(dev); rtl8169_check_link_status(dev, tp, tp->mmio_addr); @@ -5413,11 +5413,6 @@ out_unlock: static void rtl8169_tx_timeout(struct net_device *dev) { - struct rtl8169_private *tp = netdev_priv(dev); - - rtl8169_hw_reset(tp); - - /* Let's wait a bit while any (async) irq lands on */ rtl8169_schedule_work(dev, rtl8169_reset_task); } From 6b84bd167458545f0806d5a1a8a102004365d44e Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Mon, 5 Dec 2011 06:57:44 +0000 Subject: [PATCH 261/364] netback: Fix alert message. The original message in netback_init was 'kthread_run() fails', which should be 'kthread_create() fails'. Signed-off-by: Wei Liu Acked-by: Ian Campbell Signed-off-by: David S. Miller --- drivers/net/xen-netback/netback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 1ae270eed51a..15e332d08c8d 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -1668,7 +1668,7 @@ static int __init netback_init(void) "netback/%u", group); if (IS_ERR(netbk->task)) { - printk(KERN_ALERT "kthread_run() fails at netback\n"); + printk(KERN_ALERT "kthread_create() fails at netback\n"); del_timer(&netbk->net_timer); rc = PTR_ERR(netbk->task); goto failed_init; From 65e9d805e96c7e6a15c1e3b0c00a842d2249bab8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 5 Dec 2011 19:44:22 +0000 Subject: [PATCH 262/364] pasemi_mac: Fix building as module Commit ded19addf9c937d83b9bfb4d73a836732569041b ('pasemic_mac*: Move the PA Semi driver') inadvertently split pasemi_mac into two separate modules with unresolved symbols. Change it back into a single module. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/ethernet/pasemi/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/pasemi/Makefile b/drivers/net/ethernet/pasemi/Makefile index 05db5434bafc..90497ffb1ac3 100644 --- a/drivers/net/ethernet/pasemi/Makefile +++ b/drivers/net/ethernet/pasemi/Makefile @@ -2,4 +2,5 @@ # Makefile for the A Semi network device drivers. # -obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o pasemi_mac_ethtool.o +obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o +pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o From 03e98c9eb916f3f0868c1dc344dde2a60287ff72 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 4 Nov 2011 02:36:16 -0700 Subject: [PATCH 263/364] target: Address legacy PYX_TRANSPORT_* return code breakage This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number of locations and addresses cases where transport_generic_request_failure() was returning the incorrect sense upon CHECK_CONDITION status after the v3.1 converson to use errno return codes. This includes the conversion of transport_generic_request_failure() to process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT before calling transport_send_check_condition_and_sense() to queue up response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response for these cases. transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have all been updated to set se_cmd->scsi_sense_reason and return errno codes universally upon failure. This includes cmd->scsi_sense_reason assignment in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code. Finally it updates fabric modules to remove the legacy usage, and for TFO->new_cmd_map() callers forwards return values outside of fabric code. iscsi-target has also been updated to remove a handful of special cases related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending() (v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from transport_generic_new_cmd, and re-add missing task->task_error_status assignment in transport_complete_task) Cc: Christoph Hellwig Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 9 +- drivers/target/iscsi/iscsi_target_erl1.c | 3 +- drivers/target/loopback/tcm_loop.c | 24 +-- drivers/target/target_core_alua.c | 25 ++- drivers/target/target_core_cdb.c | 18 +- drivers/target/target_core_device.c | 2 +- drivers/target/target_core_file.c | 6 +- drivers/target/target_core_iblock.c | 14 +- drivers/target/target_core_pr.c | 240 +++++++++++++++-------- drivers/target/target_core_pscsi.c | 28 ++- drivers/target/target_core_rd.c | 3 +- drivers/target/target_core_tmr.c | 4 - drivers/target/target_core_transport.c | 178 +++++------------ drivers/target/tcm_fc/tfc_cmd.c | 2 +- include/target/target_core_base.h | 4 +- include/target/target_core_transport.h | 24 --- 16 files changed, 281 insertions(+), 303 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 0fd96c10271d..4d81e1007c92 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1017,11 +1017,6 @@ done: " non-existent or non-exported iSCSI LUN:" " 0x%016Lx\n", get_unaligned_le64(&hdr->lun)); } - if (ret == PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES) - return iscsit_add_reject_from_cmd( - ISCSI_REASON_BOOKMARK_NO_RESOURCES, - 1, 1, buf, cmd); - send_check_condition = 1; goto attach_cmd; } @@ -1123,7 +1118,7 @@ attach_cmd: * the backend memory allocation. */ ret = transport_generic_new_cmd(&cmd->se_cmd); - if ((ret < 0) || (cmd->se_cmd.se_cmd_flags & SCF_SE_CMD_FAILED)) { + if (ret < 0) { immed_ret = IMMEDIATE_DATA_NORMAL_OPERATION; dump_immediate_data = 1; goto after_immediate_data; @@ -1341,7 +1336,7 @@ static int iscsit_handle_data_out(struct iscsi_conn *conn, unsigned char *buf) spin_lock_irqsave(&se_cmd->t_state_lock, flags); if (!(se_cmd->se_cmd_flags & SCF_SUPPORTED_SAM_OPCODE) || - (se_cmd->se_cmd_flags & SCF_SE_CMD_FAILED)) + (se_cmd->se_cmd_flags & SCF_SCSI_CDB_EXCEPTION)) dump_unsolicited_data = 1; spin_unlock_irqrestore(&se_cmd->t_state_lock, flags); diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c index c4c68da3e500..101b1beb3bca 100644 --- a/drivers/target/iscsi/iscsi_target_erl1.c +++ b/drivers/target/iscsi/iscsi_target_erl1.c @@ -938,8 +938,7 @@ int iscsit_execute_cmd(struct iscsi_cmd *cmd, int ooo) * handle the SCF_SCSI_RESERVATION_CONFLICT case here as well. */ if (se_cmd->se_cmd_flags & SCF_SCSI_CDB_EXCEPTION) { - if (se_cmd->se_cmd_flags & - SCF_SCSI_RESERVATION_CONFLICT) { + if (se_cmd->scsi_sense_reason == TCM_RESERVATION_CONFLICT) { cmd->i_state = ISTATE_SEND_STATUS; spin_unlock_bh(&cmd->istate_lock); iscsit_add_cmd_to_response_queue(cmd, cmd->conn, diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index 3df1c9b8ae6b..cbf5e4513741 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -148,22 +148,8 @@ static int tcm_loop_new_cmd_map(struct se_cmd *se_cmd) * Allocate the necessary tasks to complete the received CDB+data */ ret = transport_generic_allocate_tasks(se_cmd, sc->cmnd); - if (ret == -ENOMEM) { - /* Out of Resources */ - return PYX_TRANSPORT_LU_COMM_FAILURE; - } else if (ret == -EINVAL) { - /* - * Handle case for SAM_STAT_RESERVATION_CONFLICT - */ - if (se_cmd->se_cmd_flags & SCF_SCSI_RESERVATION_CONFLICT) - return PYX_TRANSPORT_RESERVATION_CONFLICT; - /* - * Otherwise, return SAM_STAT_CHECK_CONDITION and return - * sense data. - */ - return PYX_TRANSPORT_USE_SENSE_REASON; - } - + if (ret != 0) + return ret; /* * For BIDI commands, pass in the extra READ buffer * to transport_generic_map_mem_to_cmd() below.. @@ -194,12 +180,8 @@ static int tcm_loop_new_cmd_map(struct se_cmd *se_cmd) } /* Tell the core about our preallocated memory */ - ret = transport_generic_map_mem_to_cmd(se_cmd, scsi_sglist(sc), + return transport_generic_map_mem_to_cmd(se_cmd, scsi_sglist(sc), scsi_sg_count(sc), sgl_bidi, sgl_bidi_count); - if (ret < 0) - return PYX_TRANSPORT_LU_COMM_FAILURE; - - return 0; } /* diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 88f2ad43ec8b..cd61331c1482 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -191,9 +191,10 @@ int target_emulate_set_target_port_groups(struct se_task *task) int alua_access_state, primary = 0, rc; u16 tg_pt_id, rtpi; - if (!l_port) - return PYX_TRANSPORT_LU_COMM_FAILURE; - + if (!l_port) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; + } buf = transport_kmap_first_data_page(cmd); /* @@ -203,7 +204,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) l_tg_pt_gp_mem = l_port->sep_alua_tg_pt_gp_mem; if (!l_tg_pt_gp_mem) { pr_err("Unable to access l_port->sep_alua_tg_pt_gp_mem\n"); - rc = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + rc = -EINVAL; goto out; } spin_lock(&l_tg_pt_gp_mem->tg_pt_gp_mem_lock); @@ -211,7 +213,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) if (!l_tg_pt_gp) { spin_unlock(&l_tg_pt_gp_mem->tg_pt_gp_mem_lock); pr_err("Unable to access *l_tg_pt_gp_mem->tg_pt_gp\n"); - rc = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + rc = -EINVAL; goto out; } rc = (l_tg_pt_gp->tg_pt_gp_alua_access_type & TPGS_EXPLICT_ALUA); @@ -220,7 +223,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) if (!rc) { pr_debug("Unable to process SET_TARGET_PORT_GROUPS" " while TPGS_EXPLICT_ALUA is disabled\n"); - rc = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + rc = -EINVAL; goto out; } @@ -245,7 +249,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) * REQUEST, and the additional sense code set to INVALID * FIELD IN PARAMETER LIST. */ - rc = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + rc = -EINVAL; goto out; } rc = -1; @@ -298,7 +303,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) * throw an exception with ASCQ: INVALID_PARAMETER_LIST */ if (rc != 0) { - rc = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + rc = -EINVAL; goto out; } } else { @@ -335,7 +341,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) * INVALID_PARAMETER_LIST */ if (rc != 0) { - rc = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + rc = -EINVAL; goto out; } } diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 683ba02b8247..8013a5a7bf64 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -703,6 +703,7 @@ int target_emulate_inquiry(struct se_task *task) if (cmd->data_length < 4) { pr_err("SCSI Inquiry payload length: %u" " too small for EVPD=1\n", cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; return -EINVAL; } @@ -719,6 +720,7 @@ int target_emulate_inquiry(struct se_task *task) } pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]); + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; ret = -EINVAL; out_unmap: @@ -969,7 +971,8 @@ int target_emulate_modesense(struct se_task *task) default: pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n", cdb[2] & 0x3f, cdb[3]); - return PYX_TRANSPORT_UNKNOWN_MODE_PAGE; + cmd->scsi_sense_reason = TCM_UNKNOWN_MODE_PAGE; + return -EINVAL; } offset += length; @@ -1027,7 +1030,8 @@ int target_emulate_request_sense(struct se_task *task) if (cdb[1] & 0x01) { pr_err("REQUEST_SENSE description emulation not" " supported\n"); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -ENOSYS; } buf = transport_kmap_first_data_page(cmd); @@ -1100,7 +1104,8 @@ int target_emulate_unmap(struct se_task *task) if (!dev->transport->do_discard) { pr_err("UNMAP emulation not supported for: %s\n", dev->transport->name); - return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + return -ENOSYS; } /* First UNMAP block descriptor starts at 8 byte offset */ @@ -1157,7 +1162,8 @@ int target_emulate_write_same(struct se_task *task) if (!dev->transport->do_discard) { pr_err("WRITE_SAME emulation not supported" " for: %s\n", dev->transport->name); - return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + return -ENOSYS; } if (cmd->t_task_cdb[0] == WRITE_SAME) @@ -1193,11 +1199,13 @@ int target_emulate_write_same(struct se_task *task) int target_emulate_synchronize_cache(struct se_task *task) { struct se_device *dev = task->task_se_cmd->se_dev; + struct se_cmd *cmd = task->task_se_cmd; if (!dev->transport->do_sync_cache) { pr_err("SYNCHRONIZE_CACHE emulation not supported" " for: %s\n", dev->transport->name); - return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + return -ENOSYS; } dev->transport->do_sync_cache(task); diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index ba5edec2c5f8..07953284ea6f 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -708,7 +708,7 @@ done: se_task->task_scsi_status = GOOD; transport_complete_task(se_task, 1); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* se_release_device_for_hba(): diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 67cd6fe05bfa..cdd47e8c7366 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -449,13 +449,15 @@ static int fd_do_task(struct se_task *task) } - if (ret < 0) + if (ret < 0) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return ret; + } if (ret) { task->task_scsi_status = GOOD; transport_complete_task(task, 1); } - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* fd_free_task(): (Part of se_subsystem_api_t template) diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index 7698efe29262..c670b8c2c994 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -554,12 +554,15 @@ static int iblock_do_task(struct se_task *task) else { pr_err("Unsupported SCSI -> BLOCK LBA conversion:" " %u\n", dev->se_sub_dev->se_dev_attrib.block_size); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOSYS; } bio = iblock_get_bio(task, block_lba, sg_num); - if (!bio) - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + if (!bio) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; + } bio_list_init(&list); bio_list_add(&list, bio); @@ -588,12 +591,13 @@ static int iblock_do_task(struct se_task *task) submit_bio(rw, bio); blk_finish_plug(&plug); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; fail: while ((bio = bio_list_pop(&list))) bio_put(bio); - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } static u32 iblock_get_device_rev(struct se_device *dev) diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 5a4ebfc3a54f..95dee7074aeb 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -191,7 +191,7 @@ static int target_check_scsi2_reservation_conflict(struct se_cmd *cmd, int *ret) pr_err("Received legacy SPC-2 RESERVE/RELEASE" " while active SPC-3 registrations exist," " returning RESERVATION_CONFLICT\n"); - *ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; return true; } @@ -252,7 +252,8 @@ int target_scsi2_reservation_reserve(struct se_task *task) (cmd->t_task_cdb[1] & 0x02)) { pr_err("LongIO and Obselete Bits set, returning" " ILLEGAL_REQUEST\n"); - ret = PYX_TRANSPORT_ILLEGAL_REQUEST; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + ret = -EINVAL; goto out; } /* @@ -277,7 +278,8 @@ int target_scsi2_reservation_reserve(struct se_task *task) " from %s \n", cmd->se_lun->unpacked_lun, cmd->se_deve->mapped_lun, sess->se_node_acl->initiatorname); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = -EINVAL; goto out_unlock; } @@ -1510,7 +1512,8 @@ static int core_scsi3_decode_spec_i_port( tidh_new = kzalloc(sizeof(struct pr_transport_id_holder), GFP_KERNEL); if (!tidh_new) { pr_err("Unable to allocate tidh_new\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } INIT_LIST_HEAD(&tidh_new->dest_list); tidh_new->dest_tpg = tpg; @@ -1522,7 +1525,8 @@ static int core_scsi3_decode_spec_i_port( sa_res_key, all_tg_pt, aptpl); if (!local_pr_reg) { kfree(tidh_new); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } tidh_new->dest_pr_reg = local_pr_reg; /* @@ -1548,7 +1552,8 @@ static int core_scsi3_decode_spec_i_port( pr_err("SPC-3 PR: Illegal tpdl: %u + 28 byte header" " does not equal CDB data_length: %u\n", tpdl, cmd->data_length); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -1598,7 +1603,9 @@ static int core_scsi3_decode_spec_i_port( " for tmp_tpg\n"); atomic_dec(&tmp_tpg->tpg_pr_ref_count); smp_mb__after_atomic_dec(); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } /* @@ -1628,7 +1635,9 @@ static int core_scsi3_decode_spec_i_port( atomic_dec(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_dec(); core_scsi3_tpg_undepend_item(tmp_tpg); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } @@ -1646,7 +1655,8 @@ static int core_scsi3_decode_spec_i_port( if (!dest_tpg) { pr_err("SPC-3 PR SPEC_I_PT: Unable to locate" " dest_tpg\n"); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } #if 0 @@ -1660,7 +1670,8 @@ static int core_scsi3_decode_spec_i_port( " %u for Transport ID: %s\n", tid_len, ptr); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -1678,7 +1689,8 @@ static int core_scsi3_decode_spec_i_port( core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -1690,7 +1702,9 @@ static int core_scsi3_decode_spec_i_port( smp_mb__after_atomic_dec(); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } #if 0 @@ -1727,7 +1741,9 @@ static int core_scsi3_decode_spec_i_port( core_scsi3_lunacl_undepend_item(dest_se_deve); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -ENOMEM; goto out; } INIT_LIST_HEAD(&tidh_new->dest_list); @@ -1759,7 +1775,8 @@ static int core_scsi3_decode_spec_i_port( core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); kfree(tidh_new); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } tidh_new->dest_pr_reg = dest_pr_reg; @@ -2098,7 +2115,8 @@ static int core_scsi3_emulate_pro_register( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } se_tpg = se_sess->se_tpg; se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; @@ -2117,13 +2135,14 @@ static int core_scsi3_emulate_pro_register( if (res_key) { pr_warn("SPC-3 PR: Reservation Key non-zero" " for SA REGISTER, returning CONFLICT\n"); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * Do nothing but return GOOD status. */ if (!sa_res_key) - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; if (!spec_i_pt) { /* @@ -2138,7 +2157,8 @@ static int core_scsi3_emulate_pro_register( if (ret != 0) { pr_err("Unable to allocate" " struct t10_pr_registration\n"); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } } else { /* @@ -2197,14 +2217,16 @@ static int core_scsi3_emulate_pro_register( " 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } } if (spec_i_pt) { pr_err("SPC-3 PR UNREGISTER: SPEC_I_PT" " set while sa_res_key=0\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* * An existing ALL_TG_PT=1 registration being released @@ -2215,7 +2237,8 @@ static int core_scsi3_emulate_pro_register( " registration exists, but ALL_TG_PT=1 bit not" " present in received PROUT\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } /* * Allocate APTPL metadata buffer used for UNREGISTER ops @@ -2227,7 +2250,9 @@ static int core_scsi3_emulate_pro_register( pr_err("Unable to allocate" " pr_aptpl_buf\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } } /* @@ -2241,7 +2266,8 @@ static int core_scsi3_emulate_pro_register( if (pr_holder < 0) { kfree(pr_aptpl_buf); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } spin_lock(&pr_tmpl->registration_lock); @@ -2405,7 +2431,8 @@ static int core_scsi3_pro_reserve( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } se_tpg = se_sess->se_tpg; se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; @@ -2417,7 +2444,8 @@ static int core_scsi3_pro_reserve( if (!pr_reg) { pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for RESERVE\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2433,7 +2461,8 @@ static int core_scsi3_pro_reserve( " does not match existing SA REGISTER res_key:" " 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2448,7 +2477,8 @@ static int core_scsi3_pro_reserve( if (scope != PR_SCOPE_LU_SCOPE) { pr_err("SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* * See if we have an existing PR reservation holder pointer at @@ -2480,7 +2510,8 @@ static int core_scsi3_pro_reserve( spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2503,7 +2534,8 @@ static int core_scsi3_pro_reserve( spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2517,7 +2549,7 @@ static int core_scsi3_pro_reserve( */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* * Otherwise, our *pr_reg becomes the PR reservation holder for said @@ -2574,7 +2606,8 @@ static int core_scsi3_emulate_pro_reserve( default: pr_err("SPC-3 PR: Unknown Service Action RESERVE Type:" " 0x%02x\n", type); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } return ret; @@ -2630,7 +2663,8 @@ static int core_scsi3_emulate_pro_release( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * Locate the existing *pr_reg via struct se_node_acl pointers @@ -2639,7 +2673,8 @@ static int core_scsi3_emulate_pro_release( if (!pr_reg) { pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for RELEASE\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * From spc4r17 Section 5.7.11.2 Releasing: @@ -2661,7 +2696,7 @@ static int core_scsi3_emulate_pro_release( */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) @@ -2675,7 +2710,7 @@ static int core_scsi3_emulate_pro_release( */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* * From spc4r17 Section 5.7.11.2 Releasing: @@ -2697,7 +2732,8 @@ static int core_scsi3_emulate_pro_release( " 0x%016Lx\n", res_key, pr_reg->pr_res_key); spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.11.2 Releasing and above: @@ -2719,7 +2755,8 @@ static int core_scsi3_emulate_pro_release( spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * In response to a persistent reservation release request from the @@ -2802,7 +2839,8 @@ static int core_scsi3_emulate_pro_clear( if (!pr_reg_n) { pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for CLEAR\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * From spc4r17 section 5.7.11.6, Clearing: @@ -2821,7 +2859,8 @@ static int core_scsi3_emulate_pro_clear( " existing SA REGISTER res_key:" " 0x%016Lx\n", res_key, pr_reg_n->pr_res_key); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * a) Release the persistent reservation, if any; @@ -2979,8 +3018,10 @@ static int core_scsi3_pro_preempt( int all_reg = 0, calling_it_nexus = 0, released_regs = 0; int prh_type = 0, prh_scope = 0, ret; - if (!se_sess) - return PYX_TRANSPORT_LU_COMM_FAILURE; + if (!se_sess) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; + } se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; pr_reg_n = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl, @@ -2989,16 +3030,19 @@ static int core_scsi3_pro_preempt( pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for PREEMPT%s\n", (abort) ? "_AND_ABORT" : ""); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } if (pr_reg_n->pr_res_key != res_key) { core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } if (scope != PR_SCOPE_LU_SCOPE) { pr_err("SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } INIT_LIST_HEAD(&preempt_and_abort_list); @@ -3012,7 +3056,8 @@ static int core_scsi3_pro_preempt( if (!all_reg && !sa_res_key) { spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* * From spc4r17, section 5.7.11.4.4 Removing Registrations: @@ -3106,7 +3151,8 @@ static int core_scsi3_pro_preempt( if (!released_regs) { spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * For an existing all registrants type reservation @@ -3297,7 +3343,8 @@ static int core_scsi3_emulate_pro_preempt( default: pr_err("SPC-3 PR: Unknown Service Action PREEMPT%s" " Type: 0x%02x\n", (abort) ? "_AND_ABORT" : "", type); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } return ret; @@ -3331,7 +3378,8 @@ static int core_scsi3_emulate_pro_register_and_move( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } memset(dest_iport, 0, 64); memset(i_buf, 0, PR_REG_ISID_ID_LEN); @@ -3349,7 +3397,8 @@ static int core_scsi3_emulate_pro_register_and_move( if (!pr_reg) { pr_err("SPC-3 PR: Unable to locate PR_REGISTERED" " *pr_reg for REGISTER_AND_MOVE\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * The provided reservation key much match the existing reservation key @@ -3360,7 +3409,8 @@ static int core_scsi3_emulate_pro_register_and_move( " res_key: 0x%016Lx does not match existing SA REGISTER" " res_key: 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * The service active reservation key needs to be non zero @@ -3369,7 +3419,8 @@ static int core_scsi3_emulate_pro_register_and_move( pr_warn("SPC-3 PR REGISTER_AND_MOVE: Received zero" " sa_res_key\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* @@ -3392,7 +3443,8 @@ static int core_scsi3_emulate_pro_register_and_move( " does not equal CDB data_length: %u\n", tid_len, cmd->data_length); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } spin_lock(&dev->se_port_lock); @@ -3417,7 +3469,8 @@ static int core_scsi3_emulate_pro_register_and_move( atomic_dec(&dest_se_tpg->tpg_pr_ref_count); smp_mb__after_atomic_dec(); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } spin_lock(&dev->se_port_lock); @@ -3430,7 +3483,8 @@ static int core_scsi3_emulate_pro_register_and_move( " fabric ops from Relative Target Port Identifier:" " %hu\n", rtpi); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -3445,14 +3499,16 @@ static int core_scsi3_emulate_pro_register_and_move( " from fabric: %s\n", proto_ident, dest_tf_ops->get_fabric_proto_ident(dest_se_tpg), dest_tf_ops->get_fabric_name()); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } if (dest_tf_ops->tpg_parse_pr_out_transport_id == NULL) { pr_err("SPC-3 PR REGISTER_AND_MOVE: Fabric does not" " containg a valid tpg_parse_pr_out_transport_id" " function pointer\n"); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } initiator_str = dest_tf_ops->tpg_parse_pr_out_transport_id(dest_se_tpg, @@ -3460,7 +3516,8 @@ static int core_scsi3_emulate_pro_register_and_move( if (!initiator_str) { pr_err("SPC-3 PR REGISTER_AND_MOVE: Unable to locate" " initiator_str from Transport ID\n"); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -3489,7 +3546,8 @@ static int core_scsi3_emulate_pro_register_and_move( pr_err("SPC-3 PR REGISTER_AND_MOVE: TransportID: %s" " matches: %s on received I_T Nexus\n", initiator_str, pr_reg_nacl->initiatorname); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } if (!strcmp(iport_ptr, pr_reg->pr_reg_isid)) { @@ -3497,7 +3555,8 @@ static int core_scsi3_emulate_pro_register_and_move( " matches: %s %s on received I_T Nexus\n", initiator_str, iport_ptr, pr_reg_nacl->initiatorname, pr_reg->pr_reg_isid); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } after_iport_check: @@ -3517,7 +3576,8 @@ after_iport_check: pr_err("Unable to locate %s dest_node_acl for" " TransportID%s\n", dest_tf_ops->get_fabric_name(), initiator_str); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } ret = core_scsi3_nodeacl_depend_item(dest_node_acl); @@ -3527,7 +3587,8 @@ after_iport_check: atomic_dec(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_dec(); dest_node_acl = NULL; - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } #if 0 @@ -3543,7 +3604,8 @@ after_iport_check: if (!dest_se_deve) { pr_err("Unable to locate %s dest_se_deve from RTPI:" " %hu\n", dest_tf_ops->get_fabric_name(), rtpi); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -3553,7 +3615,8 @@ after_iport_check: atomic_dec(&dest_se_deve->pr_ref_count); smp_mb__after_atomic_dec(); dest_se_deve = NULL; - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } #if 0 @@ -3572,7 +3635,8 @@ after_iport_check: pr_warn("SPC-3 PR REGISTER_AND_MOVE: No reservation" " currently held\n"); spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + ret = -EINVAL; goto out; } /* @@ -3585,7 +3649,8 @@ after_iport_check: pr_warn("SPC-3 PR REGISTER_AND_MOVE: Calling I_T" " Nexus is not reservation holder\n"); spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = -EINVAL; goto out; } /* @@ -3603,7 +3668,8 @@ after_iport_check: " reservation for type: %s\n", core_scsi3_pr_dump_type(pr_res_holder->pr_res_type)); spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = -EINVAL; goto out; } pr_res_nacl = pr_res_holder->pr_reg_nacl; @@ -3640,7 +3706,8 @@ after_iport_check: sa_res_key, 0, aptpl, 2, 1); if (ret != 0) { spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl, @@ -3771,7 +3838,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) pr_err("Received PERSISTENT_RESERVE CDB while legacy" " SPC-2 reservation is held, returning" " RESERVATION_CONFLICT\n"); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = EINVAL; goto out; } @@ -3779,13 +3847,16 @@ int target_scsi3_emulate_pr_out(struct se_task *task) * FIXME: A NULL struct se_session pointer means an this is not coming from * a $FABRIC_MOD's nexus, but from internal passthrough ops. */ - if (!cmd->se_sess) - return PYX_TRANSPORT_LU_COMM_FAILURE; + if (!cmd->se_sess) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; + } if (cmd->data_length < 24) { pr_warn("SPC-PR: Received PR OUT parameter list" " length too small: %u\n", cmd->data_length); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -3820,7 +3891,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) * SPEC_I_PT=1 is only valid for Service action: REGISTER */ if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER)) { - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -3837,7 +3909,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) (cmd->data_length != 24)) { pr_warn("SPC-PR: Received PR OUT illegal parameter" " list length: %u\n", cmd->data_length); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -3878,7 +3951,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) default: pr_err("Unknown PERSISTENT_RESERVE_OUT service" " action: 0x%02x\n", cdb[1] & 0x1f); - ret = PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + ret = -EINVAL; break; } @@ -3906,7 +3980,8 @@ static int core_scsi3_pri_read_keys(struct se_cmd *cmd) if (cmd->data_length < 8) { pr_err("PRIN SA READ_KEYS SCSI Data Length: %u" " too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -3965,7 +4040,8 @@ static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) if (cmd->data_length < 8) { pr_err("PRIN SA READ_RESERVATIONS SCSI Data Length: %u" " too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -4047,7 +4123,8 @@ static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) if (cmd->data_length < 6) { pr_err("PRIN SA REPORT_CAPABILITIES SCSI Data Length:" " %u too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -4108,7 +4185,8 @@ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) if (cmd->data_length < 8) { pr_err("PRIN SA READ_FULL_STATUS SCSI Data Length: %u" " too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -4255,7 +4333,8 @@ int target_scsi3_emulate_pr_in(struct se_task *task) pr_err("Received PERSISTENT_RESERVE CDB while legacy" " SPC-2 reservation is held, returning" " RESERVATION_CONFLICT\n"); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } switch (cmd->t_task_cdb[1] & 0x1f) { @@ -4274,7 +4353,8 @@ int target_scsi3_emulate_pr_in(struct se_task *task) default: pr_err("Unknown PERSISTENT_RESERVE_IN service" " action: 0x%02x\n", cmd->t_task_cdb[1] & 0x1f); - ret = PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + ret = -EINVAL; break; } diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index ed32e1efe429..8b15e56b0384 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -963,6 +963,7 @@ static inline struct bio *pscsi_get_bio(int sg_num) static int pscsi_map_sg(struct se_task *task, struct scatterlist *task_sg, struct bio **hbio) { + struct se_cmd *cmd = task->task_se_cmd; struct pscsi_dev_virt *pdv = task->task_se_cmd->se_dev->dev_ptr; u32 task_sg_num = task->task_sg_nents; struct bio *bio = NULL, *tbio = NULL; @@ -971,7 +972,7 @@ static int pscsi_map_sg(struct se_task *task, struct scatterlist *task_sg, u32 data_len = task->task_size, i, len, bytes, off; int nr_pages = (task->task_size + task_sg[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT; - int nr_vecs = 0, rc, ret = PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + int nr_vecs = 0, rc; int rw = (task->task_data_direction == DMA_TO_DEVICE); *hbio = NULL; @@ -1058,11 +1059,13 @@ fail: bio->bi_next = NULL; bio_endio(bio, 0); /* XXX: should be error */ } - return ret; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } static int pscsi_do_task(struct se_task *task) { + struct se_cmd *cmd = task->task_se_cmd; struct pscsi_dev_virt *pdv = task->task_se_cmd->se_dev->dev_ptr; struct pscsi_plugin_task *pt = PSCSI_TASK(task); struct request *req; @@ -1078,7 +1081,9 @@ static int pscsi_do_task(struct se_task *task) if (!req || IS_ERR(req)) { pr_err("PSCSI: blk_get_request() failed: %ld\n", req ? IS_ERR(req) : -ENOMEM); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENODEV; } } else { BUG_ON(!task->task_size); @@ -1087,8 +1092,11 @@ static int pscsi_do_task(struct se_task *task) * Setup the main struct request for the task->task_sg[] payload */ ret = pscsi_map_sg(task, task->task_sg, &hbio); - if (ret < 0) - return PYX_TRANSPORT_LU_COMM_FAILURE; + if (ret < 0) { + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return ret; + } req = blk_make_request(pdv->pdv_sd->request_queue, hbio, GFP_KERNEL); @@ -1115,7 +1123,7 @@ static int pscsi_do_task(struct se_task *task) (task->task_se_cmd->sam_task_attr == MSG_HEAD_TAG), pscsi_req_done); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; fail: while (hbio) { @@ -1124,7 +1132,8 @@ fail: bio->bi_next = NULL; bio_endio(bio, 0); /* XXX: should be error */ } - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } /* pscsi_get_sense_buffer(): @@ -1198,9 +1207,8 @@ static inline void pscsi_process_SAM_status( " 0x%02x Result: 0x%08x\n", task, pt->pscsi_cdb[0], pt->pscsi_result); task->task_scsi_status = SAM_STAT_CHECK_CONDITION; - task->task_error_status = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; - task->task_se_cmd->transport_error_status = - PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + task->task_se_cmd->scsi_sense_reason = + TCM_UNSUPPORTED_SCSI_OPCODE; transport_complete_task(task, 0); break; } diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index 5158d3846f19..6d8a6881cfff 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -603,8 +603,7 @@ static int rd_MEMCPY_do_task(struct se_task *task) task->task_scsi_status = GOOD; transport_complete_task(task, 1); - - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* rd_free_task(): (Part of se_subsystem_api_t template) diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 217e29df6297..684522805a1f 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -345,10 +345,6 @@ static void core_tmr_drain_cmd_list( " %d t_fe_count: %d\n", (preempt_and_abort_list) ? "Preempt" : "", cmd, cmd->t_state, atomic_read(&cmd->t_fe_count)); - /* - * Signal that the command has failed via cmd->se_cmd_flags, - */ - transport_new_cmd_failure(cmd); core_tmr_handle_tas_abort(tmr_nacl, cmd, tas, atomic_read(&cmd->t_fe_count)); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 3400ae6e93f8..a997fde9ffcb 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -82,7 +82,7 @@ static int transport_generic_get_mem(struct se_cmd *cmd); static void transport_put_cmd(struct se_cmd *cmd); static void transport_remove_cmd_from_queue(struct se_cmd *cmd); static int transport_set_sense_codes(struct se_cmd *cmd, u8 asc, u8 ascq); -static void transport_generic_request_failure(struct se_cmd *, int, int); +static void transport_generic_request_failure(struct se_cmd *); static void target_complete_ok_work(struct work_struct *work); int init_se_kmem_caches(void) @@ -680,9 +680,9 @@ void transport_complete_sync_cache(struct se_cmd *cmd, int good) task->task_scsi_status = GOOD; } else { task->task_scsi_status = SAM_STAT_CHECK_CONDITION; - task->task_error_status = PYX_TRANSPORT_ILLEGAL_REQUEST; - task->task_se_cmd->transport_error_status = - PYX_TRANSPORT_ILLEGAL_REQUEST; + task->task_se_cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + } transport_complete_task(task, good); @@ -693,7 +693,7 @@ static void target_complete_failure_work(struct work_struct *work) { struct se_cmd *cmd = container_of(work, struct se_cmd, work); - transport_generic_request_failure(cmd, 1, 1); + transport_generic_request_failure(cmd); } /* transport_complete_task(): @@ -755,10 +755,11 @@ void transport_complete_task(struct se_task *task, int success) if (cmd->t_tasks_failed) { if (!task->task_error_status) { task->task_error_status = - PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; - cmd->transport_error_status = - PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; } + INIT_WORK(&cmd->work, target_complete_failure_work); } else { atomic_set(&cmd->t_transport_complete, 1); @@ -1573,6 +1574,8 @@ int transport_generic_allocate_tasks( pr_err("Received SCSI CDB with command_size: %d that" " exceeds SCSI_MAX_VARLEN_CDB_SIZE: %d\n", scsi_command_size(cdb), SCSI_MAX_VARLEN_CDB_SIZE); + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; return -EINVAL; } /* @@ -1588,6 +1591,9 @@ int transport_generic_allocate_tasks( " %u > sizeof(cmd->__t_task_cdb): %lu ops\n", scsi_command_size(cdb), (unsigned long)sizeof(cmd->__t_task_cdb)); + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return -ENOMEM; } } else @@ -1658,11 +1664,9 @@ int transport_handle_cdb_direct( * and call transport_generic_request_failure() if necessary.. */ ret = transport_generic_new_cmd(cmd); - if (ret < 0) { - cmd->transport_error_status = ret; - transport_generic_request_failure(cmd, 0, - (cmd->data_direction != DMA_TO_DEVICE)); - } + if (ret < 0) + transport_generic_request_failure(cmd); + return 0; } EXPORT_SYMBOL(transport_handle_cdb_direct); @@ -1798,20 +1802,16 @@ static int transport_stop_tasks_for_cmd(struct se_cmd *cmd) /* * Handle SAM-esque emulation for generic transport request failures. */ -static void transport_generic_request_failure( - struct se_cmd *cmd, - int complete, - int sc) +static void transport_generic_request_failure(struct se_cmd *cmd) { int ret = 0; pr_debug("-----[ Storage Engine Exception for cmd: %p ITT: 0x%08x" " CDB: 0x%02x\n", cmd, cmd->se_tfo->get_task_tag(cmd), cmd->t_task_cdb[0]); - pr_debug("-----[ i_state: %d t_state: %d transport_error_status: %d\n", + pr_debug("-----[ i_state: %d t_state: %d scsi_sense_reason: %d\n", cmd->se_tfo->get_cmd_state(cmd), - cmd->t_state, - cmd->transport_error_status); + cmd->t_state, cmd->scsi_sense_reason); pr_debug("-----[ t_tasks: %d t_task_cdbs_left: %d" " t_task_cdbs_sent: %d t_task_cdbs_ex_left: %d --" " t_transport_active: %d t_transport_stop: %d" @@ -1829,46 +1829,19 @@ static void transport_generic_request_failure( if (cmd->se_dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) transport_complete_task_attr(cmd); - if (complete) { - cmd->transport_error_status = PYX_TRANSPORT_LU_COMM_FAILURE; - } - - switch (cmd->transport_error_status) { - case PYX_TRANSPORT_UNKNOWN_SAM_OPCODE: - cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + switch (cmd->scsi_sense_reason) { + case TCM_NON_EXISTENT_LUN: + case TCM_UNSUPPORTED_SCSI_OPCODE: + case TCM_INVALID_CDB_FIELD: + case TCM_INVALID_PARAMETER_LIST: + case TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE: + case TCM_UNKNOWN_MODE_PAGE: + case TCM_WRITE_PROTECTED: + case TCM_CHECK_CONDITION_ABORT_CMD: + case TCM_CHECK_CONDITION_UNIT_ATTENTION: + case TCM_CHECK_CONDITION_NOT_READY: break; - case PYX_TRANSPORT_REQ_TOO_MANY_SECTORS: - cmd->scsi_sense_reason = TCM_SECTOR_COUNT_TOO_MANY; - break; - case PYX_TRANSPORT_INVALID_CDB_FIELD: - cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; - break; - case PYX_TRANSPORT_INVALID_PARAMETER_LIST: - cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; - break; - case PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES: - if (!sc) - transport_new_cmd_failure(cmd); - /* - * Currently for PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES, - * we force this session to fall back to session - * recovery. - */ - cmd->se_tfo->fall_back_to_erl0(cmd->se_sess); - cmd->se_tfo->stop_session(cmd->se_sess, 0, 0); - - goto check_stop; - case PYX_TRANSPORT_LU_COMM_FAILURE: - case PYX_TRANSPORT_ILLEGAL_REQUEST: - cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; - break; - case PYX_TRANSPORT_UNKNOWN_MODE_PAGE: - cmd->scsi_sense_reason = TCM_UNKNOWN_MODE_PAGE; - break; - case PYX_TRANSPORT_WRITE_PROTECTED: - cmd->scsi_sense_reason = TCM_WRITE_PROTECTED; - break; - case PYX_TRANSPORT_RESERVATION_CONFLICT: + case TCM_RESERVATION_CONFLICT: /* * No SENSE Data payload for this case, set SCSI Status * and queue the response to $FABRIC_MOD. @@ -1893,15 +1866,9 @@ static void transport_generic_request_failure( if (ret == -EAGAIN || ret == -ENOMEM) goto queue_full; goto check_stop; - case PYX_TRANSPORT_USE_SENSE_REASON: - /* - * struct se_cmd->scsi_sense_reason already set - */ - break; default: pr_err("Unknown transport error for CDB 0x%02x: %d\n", - cmd->t_task_cdb[0], - cmd->transport_error_status); + cmd->t_task_cdb[0], cmd->scsi_sense_reason); cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; break; } @@ -1912,14 +1879,10 @@ static void transport_generic_request_failure( * transport_send_check_condition_and_sense() after handling * possible unsoliticied write data payloads. */ - if (!sc && !cmd->se_tfo->new_cmd_map) - transport_new_cmd_failure(cmd); - else { - ret = transport_send_check_condition_and_sense(cmd, - cmd->scsi_sense_reason, 0); - if (ret == -EAGAIN || ret == -ENOMEM) - goto queue_full; - } + ret = transport_send_check_condition_and_sense(cmd, + cmd->scsi_sense_reason, 0); + if (ret == -EAGAIN || ret == -ENOMEM) + goto queue_full; check_stop: transport_lun_remove_cmd(cmd); @@ -2077,8 +2040,8 @@ static int transport_execute_tasks(struct se_cmd *cmd) int add_tasks; if (se_dev_check_online(cmd->se_orig_obj_ptr) != 0) { - cmd->transport_error_status = PYX_TRANSPORT_LU_COMM_FAILURE; - transport_generic_request_failure(cmd, 0, 1); + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + transport_generic_request_failure(cmd); return 0; } @@ -2163,14 +2126,13 @@ check_depth: else error = dev->transport->do_task(task); if (error != 0) { - cmd->transport_error_status = error; spin_lock_irqsave(&cmd->t_state_lock, flags); task->task_flags &= ~TF_ACTIVE; spin_unlock_irqrestore(&cmd->t_state_lock, flags); atomic_set(&cmd->t_transport_sent, 0); transport_stop_tasks_for_cmd(cmd); atomic_inc(&dev->depth_left); - transport_generic_request_failure(cmd, 0, 1); + transport_generic_request_failure(cmd); } goto check_depth; @@ -2178,19 +2140,6 @@ check_depth: return 0; } -void transport_new_cmd_failure(struct se_cmd *se_cmd) -{ - unsigned long flags; - /* - * Any unsolicited data will get dumped for failed command inside of - * the fabric plugin - */ - spin_lock_irqsave(&se_cmd->t_state_lock, flags); - se_cmd->se_cmd_flags |= SCF_SE_CMD_FAILED; - se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; - spin_unlock_irqrestore(&se_cmd->t_state_lock, flags); -} - static inline u32 transport_get_sectors_6( unsigned char *cdb, struct se_cmd *cmd, @@ -2460,27 +2409,6 @@ static int transport_get_sense_data(struct se_cmd *cmd) return -1; } -static int -transport_handle_reservation_conflict(struct se_cmd *cmd) -{ - cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; - cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT; - cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT; - /* - * For UA Interlock Code 11b, a RESERVATION CONFLICT will - * establish a UNIT ATTENTION with PREVIOUS RESERVATION - * CONFLICT STATUS. - * - * See spc4r17, section 7.4.6 Control Mode Page, Table 349 - */ - if (cmd->se_sess && - cmd->se_dev->se_sub_dev->se_dev_attrib.emulate_ua_intlck_ctrl == 2) - core_scsi3_ua_allocate(cmd->se_sess->se_node_acl, - cmd->orig_fe_lun, 0x2C, - ASCQ_2CH_PREVIOUS_RESERVATION_CONFLICT_STATUS); - return -EINVAL; -} - static inline long long transport_dev_end_lba(struct se_device *dev) { return dev->transport->get_blocks(dev) + 1; @@ -2595,8 +2523,12 @@ static int transport_generic_cmd_sequencer( */ if (su_dev->t10_pr.pr_ops.t10_reservation_check(cmd, &pr_reg_type) != 0) { if (su_dev->t10_pr.pr_ops.t10_seq_non_holder( - cmd, cdb, pr_reg_type) != 0) - return transport_handle_reservation_conflict(cmd); + cmd, cdb, pr_reg_type) != 0) { + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EBUSY; + } /* * This means the CDB is allowed for the SCSI Initiator port * when said port is *NOT* holding the legacy SPC-2 or @@ -3813,7 +3745,7 @@ int transport_generic_new_cmd(struct se_cmd *cmd) cmd->data_length) { ret = transport_generic_get_mem(cmd); if (ret < 0) - return ret; + goto out_fail; } /* @@ -3929,7 +3861,7 @@ static int transport_generic_write_pending(struct se_cmd *cmd) else if (ret < 0) return ret; - return PYX_TRANSPORT_WRITE_PENDING; + return 1; queue_full: pr_debug("Handling write_pending QUEUE__FULL: se_cmd: %p\n", cmd); @@ -4602,9 +4534,6 @@ void transport_send_task_abort(struct se_cmd *cmd) if (cmd->se_tfo->write_pending_status(cmd) != 0) { atomic_inc(&cmd->t_transport_aborted); smp_mb__after_atomic_inc(); - cmd->scsi_status = SAM_STAT_TASK_ABORTED; - transport_new_cmd_failure(cmd); - return; } } cmd->scsi_status = SAM_STAT_TASK_ABORTED; @@ -4698,18 +4627,13 @@ get_cmd: } ret = cmd->se_tfo->new_cmd_map(cmd); if (ret < 0) { - cmd->transport_error_status = ret; - transport_generic_request_failure(cmd, - 0, (cmd->data_direction != - DMA_TO_DEVICE)); + transport_generic_request_failure(cmd); break; } ret = transport_generic_new_cmd(cmd); if (ret < 0) { - cmd->transport_error_status = ret; - transport_generic_request_failure(cmd, - 0, (cmd->data_direction != - DMA_TO_DEVICE)); + transport_generic_request_failure(cmd); + break; } break; case TRANSPORT_PROCESS_WRITE: diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index 4fac37c4c615..71fc9cea5dc9 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -200,7 +200,7 @@ int ft_write_pending(struct se_cmd *se_cmd) lport = ep->lp; fp = fc_frame_alloc(lport, sizeof(*txrdy)); if (!fp) - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + return -ENOMEM; /* Signal QUEUE_FULL */ txrdy = fc_frame_payload_get(fp, sizeof(*txrdy)); memset(txrdy, 0, sizeof(*txrdy)); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 7f5fed3c89e1..4d0cb6b8c478 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -103,7 +103,6 @@ enum se_cmd_flags_table { SCF_SCSI_NON_DATA_CDB = 0x00000040, SCF_SCSI_CDB_EXCEPTION = 0x00000080, SCF_SCSI_RESERVATION_CONFLICT = 0x00000100, - SCF_SE_CMD_FAILED = 0x00000400, SCF_SE_LUN_CMD = 0x00000800, SCF_SE_ALLOW_EOO = 0x00001000, SCF_SENT_CHECK_CONDITION = 0x00004000, @@ -154,6 +153,7 @@ enum tcm_sense_reason_table { TCM_CHECK_CONDITION_ABORT_CMD = 0x0d, TCM_CHECK_CONDITION_UNIT_ATTENTION = 0x0e, TCM_CHECK_CONDITION_NOT_READY = 0x0f, + TCM_RESERVATION_CONFLICT = 0x10, }; struct se_obj { @@ -422,8 +422,6 @@ struct se_cmd { int sam_task_attr; /* Transport protocol dependent state, see transport_state_table */ enum transport_state_table t_state; - /* Transport specific error status */ - int transport_error_status; /* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */ int check_release:1; int cmd_wait_set:1; diff --git a/include/target/target_core_transport.h b/include/target/target_core_transport.h index c16e9431dd01..dac4f2d859fd 100644 --- a/include/target/target_core_transport.h +++ b/include/target/target_core_transport.h @@ -10,29 +10,6 @@ #define PYX_TRANSPORT_STATUS_INTERVAL 5 /* In seconds */ -#define PYX_TRANSPORT_SENT_TO_TRANSPORT 0 -#define PYX_TRANSPORT_WRITE_PENDING 1 - -#define PYX_TRANSPORT_UNKNOWN_SAM_OPCODE -1 -#define PYX_TRANSPORT_HBA_QUEUE_FULL -2 -#define PYX_TRANSPORT_REQ_TOO_MANY_SECTORS -3 -#define PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES -4 -#define PYX_TRANSPORT_INVALID_CDB_FIELD -5 -#define PYX_TRANSPORT_INVALID_PARAMETER_LIST -6 -#define PYX_TRANSPORT_LU_COMM_FAILURE -7 -#define PYX_TRANSPORT_UNKNOWN_MODE_PAGE -8 -#define PYX_TRANSPORT_WRITE_PROTECTED -9 -#define PYX_TRANSPORT_RESERVATION_CONFLICT -10 -#define PYX_TRANSPORT_ILLEGAL_REQUEST -11 -#define PYX_TRANSPORT_USE_SENSE_REASON -12 - -#ifndef SAM_STAT_RESERVATION_CONFLICT -#define SAM_STAT_RESERVATION_CONFLICT 0x18 -#endif - -#define TRANSPORT_PLUGIN_FREE 0 -#define TRANSPORT_PLUGIN_REGISTERED 1 - #define TRANSPORT_PLUGIN_PHBA_PDEV 1 #define TRANSPORT_PLUGIN_VHBA_PDEV 2 #define TRANSPORT_PLUGIN_VHBA_VDEV 3 @@ -158,7 +135,6 @@ extern int transport_generic_allocate_tasks(struct se_cmd *, unsigned char *); extern int transport_handle_cdb_direct(struct se_cmd *); extern int transport_generic_handle_cdb_map(struct se_cmd *); extern int transport_generic_handle_data(struct se_cmd *); -extern void transport_new_cmd_failure(struct se_cmd *); extern int transport_generic_handle_tmr(struct se_cmd *); extern bool target_stop_task(struct se_task *task, unsigned long *flags); extern int transport_generic_map_mem_to_cmd(struct se_cmd *cmd, struct scatterlist *, u32, From 0957627a99604f379d35831897a2aa15272528fc Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 4 Nov 2011 11:36:38 -0700 Subject: [PATCH 264/364] iscsi-target: Fix sess allocation leak in iscsi_login_zero_tsih_s1 This patch adds missing kfree() for an allocation in iscsi_login_zero_tsih_s1() code, and make transport_init_session() check for IS_ERR() returns. Reported-by: Dan Carpenter Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_login.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index daad362a93ce..d734bdec24f9 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -224,7 +224,7 @@ static int iscsi_login_zero_tsih_s1( iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); pr_err("Could not allocate memory for session\n"); - return -1; + return -ENOMEM; } iscsi_login_set_conn_values(sess, conn, pdu->cid); @@ -250,7 +250,8 @@ static int iscsi_login_zero_tsih_s1( pr_err("idr_pre_get() for sess_idr failed\n"); iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); - return -1; + kfree(sess); + return -ENOMEM; } spin_lock(&sess_idr_lock); idr_get_new(&sess_idr, NULL, &sess->session_index); @@ -270,14 +271,16 @@ static int iscsi_login_zero_tsih_s1( ISCSI_LOGIN_STATUS_NO_RESOURCES); pr_err("Unable to allocate memory for" " struct iscsi_sess_ops.\n"); - return -1; + kfree(sess); + return -ENOMEM; } sess->se_sess = transport_init_session(); - if (!sess->se_sess) { + if (IS_ERR(sess->se_sess)) { iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); - return -1; + kfree(sess); + return -ENOMEM; } return 0; From 330694a50f5b80e983136237c10516810fb427a9 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Sun, 6 Nov 2011 18:37:23 +0100 Subject: [PATCH 265/364] target: Improve system responsivity during I/O While testing ib_srpt I noticed that the target system became rather unresponsive during intensive I/O. The patch below made my target system responsive again during I/O without decreasing performance. Signed-off-by: Bart Van Assche Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index a997fde9ffcb..06cce8178fcf 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4599,8 +4599,6 @@ static int transport_processing_thread(void *param) struct se_cmd *cmd; struct se_device *dev = (struct se_device *) param; - set_user_nice(current, -20); - while (!kthread_should_stop()) { ret = wait_event_interruptible(dev->dev_queue_obj.thread_wq, atomic_read(&dev->dev_queue_obj.queue_cnt) || From 5f655e8d2a7cdc41943f929e86054051d7441ec5 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 8 Nov 2011 20:46:29 +0100 Subject: [PATCH 266/364] target: Avoid compiler warnings about signed one-bit bitfields Convert to unsigned bit fields for active I/O shutdown fields. Signed-off-by: Bart Van Assche Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 4d0cb6b8c478..36a06f79c973 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -423,8 +423,8 @@ struct se_cmd { /* Transport protocol dependent state, see transport_state_table */ enum transport_state_table t_state; /* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */ - int check_release:1; - int cmd_wait_set:1; + unsigned check_release:1; + unsigned cmd_wait_set:1; /* See se_cmd_flags_table */ u32 se_cmd_flags; u32 se_ordered_id; @@ -560,7 +560,7 @@ struct se_node_acl { } ____cacheline_aligned; struct se_session { - int sess_tearing_down:1; + unsigned sess_tearing_down:1; u64 sess_bin_isid; struct se_node_acl *se_node_acl; struct se_portal_group *se_tpg; From 97c34f3b04978799fd6eada69e1a8d84b74d9599 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 10 Nov 2011 11:22:47 -0800 Subject: [PATCH 267/364] target: Get rid of unused se_cmd_cache Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 06cce8178fcf..b4073d283408 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -61,7 +61,6 @@ static int sub_api_initialized; static struct workqueue_struct *target_completion_wq; -static struct kmem_cache *se_cmd_cache; static struct kmem_cache *se_sess_cache; struct kmem_cache *se_tmr_req_cache; struct kmem_cache *se_ua_cache; @@ -87,19 +86,13 @@ static void target_complete_ok_work(struct work_struct *work); int init_se_kmem_caches(void) { - se_cmd_cache = kmem_cache_create("se_cmd_cache", - sizeof(struct se_cmd), __alignof__(struct se_cmd), 0, NULL); - if (!se_cmd_cache) { - pr_err("kmem_cache_create for struct se_cmd failed\n"); - goto out; - } se_tmr_req_cache = kmem_cache_create("se_tmr_cache", sizeof(struct se_tmr_req), __alignof__(struct se_tmr_req), 0, NULL); if (!se_tmr_req_cache) { pr_err("kmem_cache_create() for struct se_tmr_req" " failed\n"); - goto out_free_cmd_cache; + goto out; } se_sess_cache = kmem_cache_create("se_sess_cache", sizeof(struct se_session), __alignof__(struct se_session), @@ -182,8 +175,6 @@ out_free_sess_cache: kmem_cache_destroy(se_sess_cache); out_free_tmr_req_cache: kmem_cache_destroy(se_tmr_req_cache); -out_free_cmd_cache: - kmem_cache_destroy(se_cmd_cache); out: return -ENOMEM; } @@ -191,7 +182,6 @@ out: void release_se_kmem_caches(void) { destroy_workqueue(target_completion_wq); - kmem_cache_destroy(se_cmd_cache); kmem_cache_destroy(se_tmr_req_cache); kmem_cache_destroy(se_sess_cache); kmem_cache_destroy(se_ua_cache); From 6297b07cbc42eb6b53eb88fce70a4727ea230797 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 12 Nov 2011 09:29:51 -0800 Subject: [PATCH 268/364] target: Drop config_item_name usage in fabric TFO->free_wwn() This patch removes config_item_name() informational usage of TFO->free_wwn() treewide in loopback, tcm_fc, ib_srpt and tcm_vhost module code. Using v4 target_core_fabric_configfs.c logic, a fabric call for config_item_name() in TFO->drop_wwn() context returns NULL as target_fabric_drop_wwn() invoking config_item_put() -> config_group_put() will release fabric_port->port_wwn.wwn_group before the last config_item_put() -> TFO->drop_wwn() is invoked. Reported-by: Bart Van Assche Signed-off-by: Nicholas Bellinger --- drivers/target/loopback/tcm_loop.c | 9 ++++----- drivers/target/tcm_fc/tfc_conf.c | 3 +-- 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index cbf5e4513741..0ca89f02e26f 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -1342,17 +1342,16 @@ void tcm_loop_drop_scsi_hba( { struct tcm_loop_hba *tl_hba = container_of(wwn, struct tcm_loop_hba, tl_hba_wwn); - int host_no = tl_hba->sh->host_no; + + pr_debug("TCM_Loop_ConfigFS: Deallocating emulated Target" + " SAS Address: %s at Linux/SCSI Host ID: %d\n", + tl_hba->tl_wwn_address, tl_hba->sh->host_no); /* * Call device_unregister() on the original tl_hba->dev. * tcm_loop_fabric_scsi.c:tcm_loop_release_adapter() will * release *tl_hba; */ device_unregister(&tl_hba->dev); - - pr_debug("TCM_Loop_ConfigFS: Deallocated emulated Target" - " SAS Address: %s at Linux/SCSI Host ID: %d\n", - config_item_name(&wwn->wwn_group.cg_item), host_no); } /* Start items for tcm_loop_cit */ diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index 5f770412ca40..9402b7387cac 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -436,8 +436,7 @@ static void ft_del_lport(struct se_wwn *wwn) struct ft_lport_acl *lacl = container_of(wwn, struct ft_lport_acl, fc_lport_wwn); - pr_debug("del lport %s\n", - config_item_name(&wwn->wwn_group.cg_item)); + pr_debug("del lport %s\n", lacl->name); mutex_lock(&ft_lport_lock); list_del(&lacl->list); mutex_unlock(&ft_lport_lock); From 58a2801a4b9ad97d3685bb7a3344e17d60292908 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:27 -0500 Subject: [PATCH 269/364] target: remove the se_obj_ptr and se_orig_obj_ptr se_cmd fields We already have a perfectly valid se_device pointer in the command, so remove the mostly useless duplicates. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 3 --- drivers/target/target_core_transport.c | 2 +- include/target/target_core_base.h | 2 -- 3 files changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 07953284ea6f..dd5adb82e3df 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -104,7 +104,6 @@ int transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) se_cmd->se_lun = deve->se_lun; se_cmd->pr_res_key = deve->pr_res_key; se_cmd->orig_fe_lun = unpacked_lun; - se_cmd->se_orig_obj_ptr = se_cmd->se_lun->lun_se_dev; se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD; } spin_unlock_irqrestore(&se_sess->se_node_acl->device_list_lock, flags); @@ -137,7 +136,6 @@ int transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) se_lun = &se_sess->se_tpg->tpg_virt_lun0; se_cmd->se_lun = &se_sess->se_tpg->tpg_virt_lun0; se_cmd->orig_fe_lun = 0; - se_cmd->se_orig_obj_ptr = se_cmd->se_lun->lun_se_dev; se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD; } /* @@ -200,7 +198,6 @@ int transport_lookup_tmr_lun(struct se_cmd *se_cmd, u32 unpacked_lun) se_lun = deve->se_lun; se_cmd->pr_res_key = deve->pr_res_key; se_cmd->orig_fe_lun = unpacked_lun; - se_cmd->se_orig_obj_ptr = se_cmd->se_dev; } spin_unlock_irqrestore(&se_sess->se_node_acl->device_list_lock, flags); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index b4073d283408..db2271c18030 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2029,7 +2029,7 @@ static int transport_execute_tasks(struct se_cmd *cmd) { int add_tasks; - if (se_dev_check_online(cmd->se_orig_obj_ptr) != 0) { + if (se_dev_check_online(cmd->se_dev) != 0) { cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; transport_generic_request_failure(cmd); return 0; diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 36a06f79c973..f63997316dab 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -444,8 +444,6 @@ struct se_cmd { struct list_head se_qf_node; struct se_device *se_dev; struct se_dev_entry *se_deve; - struct se_device *se_obj_ptr; - struct se_device *se_orig_obj_ptr; struct se_lun *se_lun; /* Only used for internal passthrough and legacy TCM fabric modules */ struct se_session *se_sess; From aad13ca20d960ab74b739d7bbe876dac4502f546 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:28 -0500 Subject: [PATCH 270/364] target: remove the se_ordered_node se_cmd field We never walk ordered_cmd_list in the se_device, so remove all code related to supporting it. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 11 ----------- include/target/target_core_base.h | 3 --- 2 files changed, 14 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index db2271c18030..a66050ec2c2f 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1332,12 +1332,10 @@ struct se_device *transport_add_device_to_core_hba( INIT_LIST_HEAD(&dev->dev_tmr_list); INIT_LIST_HEAD(&dev->execute_task_list); INIT_LIST_HEAD(&dev->delayed_cmd_list); - INIT_LIST_HEAD(&dev->ordered_cmd_list); INIT_LIST_HEAD(&dev->state_task_list); INIT_LIST_HEAD(&dev->qf_cmd_list); spin_lock_init(&dev->execute_task_lock); spin_lock_init(&dev->delayed_cmd_lock); - spin_lock_init(&dev->ordered_cmd_lock); spin_lock_init(&dev->state_task_lock); spin_lock_init(&dev->dev_alua_lock); spin_lock_init(&dev->dev_reservation_lock); @@ -1498,7 +1496,6 @@ void transport_init_se_cmd( { INIT_LIST_HEAD(&cmd->se_lun_node); INIT_LIST_HEAD(&cmd->se_delayed_node); - INIT_LIST_HEAD(&cmd->se_ordered_node); INIT_LIST_HEAD(&cmd->se_qf_node); INIT_LIST_HEAD(&cmd->se_queue_node); INIT_LIST_HEAD(&cmd->se_cmd_list); @@ -1963,11 +1960,6 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) cmd->se_ordered_id); return 1; } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { - spin_lock(&cmd->se_dev->ordered_cmd_lock); - list_add_tail(&cmd->se_ordered_node, - &cmd->se_dev->ordered_cmd_list); - spin_unlock(&cmd->se_dev->ordered_cmd_lock); - atomic_inc(&cmd->se_dev->dev_ordered_sync); smp_mb__after_atomic_inc(); @@ -3100,11 +3092,8 @@ static void transport_complete_task_attr(struct se_cmd *cmd) " HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { - spin_lock(&dev->ordered_cmd_lock); - list_del(&cmd->se_ordered_node); atomic_dec(&dev->dev_ordered_sync); smp_mb__after_atomic_dec(); - spin_unlock(&dev->ordered_cmd_lock); dev->dev_cur_ordered_id++; pr_debug("Incremented dev_cur_ordered_id: %u for ORDERED:" diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index f63997316dab..29773342f2c6 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -439,7 +439,6 @@ struct se_cmd { /* Used for sense data */ void *sense_buffer; struct list_head se_delayed_node; - struct list_head se_ordered_node; struct list_head se_lun_node; struct list_head se_qf_node; struct se_device *se_dev; @@ -730,7 +729,6 @@ struct se_device { struct se_obj dev_export_obj; struct se_queue_obj dev_queue_obj; spinlock_t delayed_cmd_lock; - spinlock_t ordered_cmd_lock; spinlock_t execute_task_lock; spinlock_t state_task_lock; spinlock_t dev_alua_lock; @@ -756,7 +754,6 @@ struct se_device { struct task_struct *dev_mgmt_thread; struct work_struct qf_work_queue; struct list_head delayed_cmd_list; - struct list_head ordered_cmd_list; struct list_head execute_task_list; struct list_head state_task_list; struct list_head qf_cmd_list; From 2d3a4b51df4db2ee0415f42a63b9629a7977b975 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:29 -0500 Subject: [PATCH 271/364] target: remove the t_tasks_fua se_cmd field And use a SCF_FUA flag instead. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_file.c | 2 +- drivers/target/target_core_iblock.c | 2 +- drivers/target/target_core_transport.c | 15 ++++++++++----- include/target/target_core_base.h | 2 +- 4 files changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index cdd47e8c7366..38211322415e 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -438,7 +438,7 @@ static int fd_do_task(struct se_task *task) if (ret > 0 && dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0 && dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0 && - cmd->t_tasks_fua) { + (cmd->se_cmd_flags & SCF_FUA)) { /* * We might need to be a bit smarter here * and return some sense data to let the initiator diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index c670b8c2c994..4aa992204438 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -531,7 +531,7 @@ static int iblock_do_task(struct se_task *task) */ if (dev->se_sub_dev->se_dev_attrib.emulate_write_cache == 0 || (dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0 && - task->task_se_cmd->t_tasks_fua)) + (cmd->se_cmd_flags & SCF_FUA))) rw = WRITE_FUA; else rw = WRITE; diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index a66050ec2c2f..866af5d5869f 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2572,7 +2572,8 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; size = transport_get_size(sectors, cdb, cmd); cmd->t_task_lba = transport_lba_32(cdb); - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; break; case WRITE_12: @@ -2581,7 +2582,8 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; size = transport_get_size(sectors, cdb, cmd); cmd->t_task_lba = transport_lba_32(cdb); - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; break; case WRITE_16: @@ -2590,7 +2592,8 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; size = transport_get_size(sectors, cdb, cmd); cmd->t_task_lba = transport_lba_64(cdb); - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; break; case XDWRITEREAD_10: @@ -2614,7 +2617,8 @@ static int transport_generic_cmd_sequencer( * Setup BIDI XOR callback to be run after I/O completion. */ cmd->transport_complete_callback = &transport_xor_callback; - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; break; case VARIABLE_LENGTH_CMD: service_action = get_unaligned_be16(&cdb[8]); @@ -2642,7 +2646,8 @@ static int transport_generic_cmd_sequencer( * completion. */ cmd->transport_complete_callback = &transport_xor_callback; - cmd->t_tasks_fua = (cdb[10] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; break; case WRITE_SAME_32: sectors = transport_get_sectors_32(cdb, cmd, §or_ret); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 29773342f2c6..357af4546d25 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -103,6 +103,7 @@ enum se_cmd_flags_table { SCF_SCSI_NON_DATA_CDB = 0x00000040, SCF_SCSI_CDB_EXCEPTION = 0x00000080, SCF_SCSI_RESERVATION_CONFLICT = 0x00000100, + SCF_FUA = 0x00000200, SCF_SE_LUN_CMD = 0x00000800, SCF_SE_ALLOW_EOO = 0x00001000, SCF_SENT_CHECK_CONDITION = 0x00004000, @@ -458,7 +459,6 @@ struct se_cmd { unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE]; unsigned long long t_task_lba; int t_tasks_failed; - int t_tasks_fua; bool t_tasks_bidi; u32 t_tasks_sg_chained_no; atomic_t t_fe_count; From 33c3fafc43e56a22be60ebe67bec5ba763d51010 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:30 -0500 Subject: [PATCH 272/364] target: remove the t_tasks_bidi se_cmd field And use a SCF_BIDI flag instead. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/loopback/tcm_loop.c | 8 +++----- drivers/target/target_core_transport.c | 2 +- include/target/target_core_base.h | 2 +- 3 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index 0ca89f02e26f..81d5832fbbd5 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -113,11 +113,9 @@ static struct se_cmd *tcm_loop_allocate_core_cmd( scsi_bufflen(sc), sc->sc_data_direction, sam_task_attr, &tl_cmd->tl_sense_buf[0]); - /* - * Signal BIDI usage with T_TASK(cmd)->t_tasks_bidi - */ if (scsi_bidi_cmnd(sc)) - se_cmd->t_tasks_bidi = 1; + se_cmd->se_cmd_flags |= SCF_BIDI; + /* * Locate the struct se_lun pointer and attach it to struct se_cmd */ @@ -154,7 +152,7 @@ static int tcm_loop_new_cmd_map(struct se_cmd *se_cmd) * For BIDI commands, pass in the extra READ buffer * to transport_generic_map_mem_to_cmd() below.. */ - if (se_cmd->t_tasks_bidi) { + if (se_cmd->se_cmd_flags & SCF_BIDI) { struct scsi_data_buffer *sdb = scsi_in(sc); sgl_bidi = sdb->table.sgl; diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 866af5d5869f..8f29f472c50b 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2598,7 +2598,7 @@ static int transport_generic_cmd_sequencer( break; case XDWRITEREAD_10: if ((cmd->data_direction != DMA_TO_DEVICE) || - !(cmd->t_tasks_bidi)) + !(cmd->se_cmd_flags & SCF_BIDI)) goto out_invalid_cdb_field; sectors = transport_get_sectors_10(cdb, cmd, §or_ret); if (sector_ret) diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 357af4546d25..3f9e4da5bd9f 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -106,6 +106,7 @@ enum se_cmd_flags_table { SCF_FUA = 0x00000200, SCF_SE_LUN_CMD = 0x00000800, SCF_SE_ALLOW_EOO = 0x00001000, + SCF_BIDI = 0x00002000, SCF_SENT_CHECK_CONDITION = 0x00004000, SCF_OVERFLOW_BIT = 0x00008000, SCF_UNDERFLOW_BIT = 0x00010000, @@ -459,7 +460,6 @@ struct se_cmd { unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE]; unsigned long long t_task_lba; int t_tasks_failed; - bool t_tasks_bidi; u32 t_tasks_sg_chained_no; atomic_t t_fe_count; atomic_t t_se_count; From 6fd126ffebef3897d8fca98644a9fd1cc5c7a5e3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:31 -0500 Subject: [PATCH 273/364] target: remove the unused t_task_pt_sgl and t_task_pt_sgl_num se_cmd fields Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 8 -------- 1 file changed, 8 deletions(-) diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 3f9e4da5bd9f..3a21e2234d2b 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -484,14 +484,6 @@ struct se_cmd { struct work_struct work; - /* - * Used for pre-registered fabric SGL passthrough WRITE and READ - * with the special SCF_PASSTHROUGH_CONTIG_TO_SG case for TCM_Loop - * and other HW target mode fabric modules. - */ - struct scatterlist *t_task_pt_sgl; - u32 t_task_pt_sgl_num; - struct scatterlist *t_data_sg; unsigned int t_data_nents; struct scatterlist *t_bidi_data_sg; From fef58a6096770ed6ab49103a430cc755254a74d9 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 15 Nov 2011 22:13:24 -0800 Subject: [PATCH 274/364] target: Reject SCSI data overflow for fabrics using transport_generic_map_mem_to_cmd This patch changes transport_generic_map_mem_to_cmd() to reject SCSI data overflow and to send exception status with CHECK_CONDITION + TCM_INVALID_CDB_FIELD for fabrics that are passing a pre-populated struct scatterlist (eg: tcm_loop and iscsi-target) being mapped into se_cmd->t_data_sg and se_cmd->t_data_nents. This addresses an OOPs where transport_allocate_data_tasks() would walk the incorrect post OVERFLOW cmd->data_length value beyond the end of the passed scatterlist. Cc: Christoph Hellwig Cc: Andy Grover Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 8f29f472c50b..0bdb6badbf99 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3411,6 +3411,18 @@ int transport_generic_map_mem_to_cmd( if ((cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) || (cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB)) { + /* + * Reject SCSI data overflow with map_mem_to_cmd() as incoming + * scatterlists already have been set to follow what the fabric + * passes for the original expected data transfer length. + */ + if (cmd->se_cmd_flags & SCF_OVERFLOW_BIT) { + pr_warn("Rejecting SCSI DATA overflow for fabric using" + " SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC\n"); + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; + } cmd->t_data_sg = sgl; cmd->t_data_nents = sgl_count; From 7e46cf02687e40197ae07c623e660be2a2720064 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 15 Nov 2011 23:59:00 -0800 Subject: [PATCH 275/364] iscsi-target: Fix residual count hanlding + remove iscsi_cmd->residual_count This patch fixes iscsi-target handling of underflow where residual data is causing an OOPs by using the incorrect iscsi_cmd_t->data_length initially assigned in iscsit_allocate_se_cmd(). It resets iscsi_cmd_t->data_length from se_cmd_t->data_length after transport_generic_allocate_tasks() has been invoked in iscsit_handle_scsi_cmd() RX context, and converts iscsi_cmd->residual_count usage to access iscsi_cmd->se_cmd.residual_count to get the proper residual count set by target-core. Reported-by: Cc: Christoph Hellwig Cc: Andy Grover Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 10 ++++++---- drivers/target/iscsi/iscsi_target_core.h | 1 - 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 4d81e1007c92..26834eff8960 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1039,6 +1039,8 @@ done: */ send_check_condition = 1; } else { + cmd->data_length = cmd->se_cmd.data_length; + if (iscsit_decide_list_to_build(cmd, payload_length) < 0) return iscsit_add_reject_from_cmd( ISCSI_REASON_BOOKMARK_NO_RESOURCES, @@ -2508,10 +2510,10 @@ static int iscsit_send_data_in( if (hdr->flags & ISCSI_FLAG_DATA_STATUS) { if (cmd->se_cmd.se_cmd_flags & SCF_OVERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_DATA_OVERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } else if (cmd->se_cmd.se_cmd_flags & SCF_UNDERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_DATA_UNDERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } } hton24(hdr->dlength, datain.length); @@ -3013,10 +3015,10 @@ static int iscsit_send_status( hdr->flags |= ISCSI_FLAG_CMD_FINAL; if (cmd->se_cmd.se_cmd_flags & SCF_OVERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_CMD_OVERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } else if (cmd->se_cmd.se_cmd_flags & SCF_UNDERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_CMD_UNDERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } hdr->response = cmd->iscsi_response; hdr->cmd_status = cmd->se_cmd.scsi_status; diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index 3723d90d5ae5..0e96a6b13174 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -398,7 +398,6 @@ struct iscsi_cmd { u32 pdu_send_order; /* Current struct iscsi_pdu in struct iscsi_cmd->pdu_list */ u32 pdu_start; - u32 residual_count; /* Next struct iscsi_seq to send in struct iscsi_cmd->seq_list */ u32 seq_send_order; /* Number of struct iscsi_seq in struct iscsi_cmd->seq_list */ From 7ae0b1038f9f7d4c91e9afd4dbbc98210bf1a241 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sun, 27 Nov 2011 22:25:14 -0800 Subject: [PATCH 276/364] iscsi-target: Add missing F_BIT for iscsi_tm_rsp This patch sets the missing ISCSI_FLAG_CMD_FINAL bit in iscsit_send_task_mgt_rsp() for a struct iscsi_tm_rsp PDU. This usage is hardcoded for all TM response PDUs in RFC-3720 section 10.6. Reported-by: whucecil Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 26834eff8960..02de527940de 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3130,6 +3130,7 @@ static int iscsit_send_task_mgt_rsp( hdr = (struct iscsi_tm_rsp *) cmd->pdu; memset(hdr, 0, ISCSI_HDR_LEN); hdr->opcode = ISCSI_OP_SCSI_TMFUNC_RSP; + hdr->flags = ISCSI_FLAG_CMD_FINAL; hdr->response = iscsit_convert_tcm_tmr_rsp(se_tmr); hdr->itt = cpu_to_be32(cmd->init_task_tag); cmd->stat_sn = conn->stat_sn++; From 1c3d5794fc4a2afd2258b3aa6406377934a36663 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 17 Nov 2011 23:43:40 +0100 Subject: [PATCH 277/364] iscsi-target: Use kmemdup rather than duplicating its implementation The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 6 ++---- drivers/target/iscsi/iscsi_target_nego.c | 3 +-- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 02de527940de..8599545cdf9e 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -614,13 +614,12 @@ int iscsit_add_reject( hdr = (struct iscsi_reject *) cmd->pdu; hdr->reason = reason; - cmd->buf_ptr = kzalloc(ISCSI_HDR_LEN, GFP_KERNEL); + cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); iscsit_release_cmd(cmd); return -1; } - memcpy(cmd->buf_ptr, buf, ISCSI_HDR_LEN); spin_lock_bh(&conn->cmd_lock); list_add_tail(&cmd->i_list, &conn->conn_cmd_list); @@ -661,13 +660,12 @@ int iscsit_add_reject_from_cmd( hdr = (struct iscsi_reject *) cmd->pdu; hdr->reason = reason; - cmd->buf_ptr = kzalloc(ISCSI_HDR_LEN, GFP_KERNEL); + cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); iscsit_release_cmd(cmd); return -1; } - memcpy(cmd->buf_ptr, buf, ISCSI_HDR_LEN); if (add_to_conn) { spin_lock_bh(&conn->cmd_lock); diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c index 426cd4bf6a9a..98936cb7c294 100644 --- a/drivers/target/iscsi/iscsi_target_nego.c +++ b/drivers/target/iscsi/iscsi_target_nego.c @@ -981,14 +981,13 @@ struct iscsi_login *iscsi_target_init_negotiation( return NULL; } - login->req = kzalloc(ISCSI_HDR_LEN, GFP_KERNEL); + login->req = kmemdup(login_pdu, ISCSI_HDR_LEN, GFP_KERNEL); if (!login->req) { pr_err("Unable to allocate memory for Login Request.\n"); iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); goto out; } - memcpy(login->req, login_pdu, ISCSI_HDR_LEN); login->req_buf = kzalloc(MAX_KEY_VALUE_PAIRS, GFP_KERNEL); if (!login->req_buf) { From 410f670202f0f13cdac8459b9c3effeeead135d1 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 22 Nov 2011 13:51:32 -0800 Subject: [PATCH 278/364] target: Don't return an error status for 0-length READ and WRITE IO commands with a TRANSFER LENGTH of 0 are not an error; for example, for READ (10) and WRITE (10), SBC-3 says: A TRANSFER LENGTH field set to zero specifies that no logical blocks shall be read. This condition shall not be considered an error. In case we have nothing to do, just complete the command with good status. Signed-off-by: Roland Dreier Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 0bdb6badbf99..1b760a0b1109 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3770,8 +3770,15 @@ int transport_generic_new_cmd(struct se_cmd *cmd) task_cdbs = transport_allocate_control_task(cmd); } - if (task_cdbs <= 0) + if (task_cdbs < 0) goto out_fail; + else if (!task_cdbs && (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)) { + cmd->t_state = TRANSPORT_COMPLETE; + atomic_set(&cmd->t_transport_active, 1); + INIT_WORK(&cmd->work, target_complete_ok_work); + queue_work(target_completion_wq, &cmd->work); + return 0; + } if (set_counts) { atomic_inc(&cmd->t_fe_count); From 9b5cd7f37e1e018432111333e2a67f78ba41edfe Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 22 Nov 2011 13:51:33 -0800 Subject: [PATCH 279/364] target: Handle 0 correctly in transport_get_sectors_6() SBC-3 says: A TRANSFER LENGTH field set to zero specifies that 256 logical blocks shall be written. Any other value specifies the number of logical blocks that shall be written. The old code was always just returning the value in the TRANSFER LENGTH byte. Fix this to return 256 if the byte is 0. Signed-off-by: Roland Dreier Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 1b760a0b1109..9faaaae78b0a 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2144,10 +2144,15 @@ static inline u32 transport_get_sectors_6( /* * Everything else assume TYPE_DISK Sector CDB location. - * Use 8-bit sector value. + * Use 8-bit sector value. SBC-3 says: + * + * A TRANSFER LENGTH field set to zero specifies that 256 + * logical blocks shall be written. Any other value + * specifies the number of logical blocks that shall be + * written. */ type_disk: - return (u32)cdb[4]; + return cdb[4] ? : 256; } static inline u32 transport_get_sectors_10( From 1289a0571c037b4757f60597d646aedb70361ec3 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 22 Nov 2011 13:51:34 -0800 Subject: [PATCH 280/364] target: Fix page length in emulated INQUIRY VPD page 86h The LSB of the page length is at offset 3, not 2. Signed-off-by: Roland Dreier Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 8013a5a7bf64..831468b3163d 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -478,7 +478,7 @@ target_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf) if (cmd->data_length < 60) return 0; - buf[2] = 0x3c; + buf[3] = 0x3c; /* Set HEADSUP, ORDSUP, SIMPSUP */ buf[5] = 0x07; From 5c73b678f729ea087ef57b59a5d7b5dd3a97042b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rn=20Engel?= Date: Thu, 24 Nov 2011 02:04:16 +0100 Subject: [PATCH 281/364] target: remove unused struct fields Some are never used, some are set but never read, dev_hoq_count is incremented and decremented, but never read. Signed-off-by: Joern Engel Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_core.h | 2 -- drivers/target/target_core_alua.c | 2 -- drivers/target/target_core_transport.c | 8 -------- include/target/target_core_base.h | 18 ------------------ 4 files changed, 30 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index 0e96a6b13174..f1a02dad05a0 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -534,7 +534,6 @@ struct iscsi_conn { atomic_t connection_exit; atomic_t connection_recovery; atomic_t connection_reinstatement; - atomic_t connection_wait; atomic_t connection_wait_rcfr; atomic_t sleep_on_conn_wait_comp; atomic_t transport_failed; @@ -642,7 +641,6 @@ struct iscsi_session { atomic_t session_reinstatement; atomic_t session_stop_active; atomic_t sleep_on_sess_wait_comp; - atomic_t transport_wait_cmds; /* connection list */ struct list_head sess_conn_list; struct list_head cr_active_list; diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index cd61331c1482..1dcbef499d6a 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -1191,7 +1191,6 @@ void core_alua_free_lu_gp(struct t10_alua_lu_gp *lu_gp) * struct t10_alua_lu_gp. */ spin_lock(&lu_gps_lock); - atomic_set(&lu_gp->lu_gp_shutdown, 1); list_del(&lu_gp->lu_gp_node); alua_lu_gps_count--; spin_unlock(&lu_gps_lock); @@ -1445,7 +1444,6 @@ struct t10_alua_tg_pt_gp_member *core_alua_allocate_tg_pt_gp_mem( tg_pt_gp_mem->tg_pt = port; port->sep_alua_tg_pt_gp_mem = tg_pt_gp_mem; - atomic_set(&port->sep_tg_pt_gp_active, 1); return tg_pt_gp_mem; } diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 9faaaae78b0a..0257658e2e3e 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1326,7 +1326,6 @@ struct se_device *transport_add_device_to_core_hba( dev->se_hba = hba; dev->se_sub_dev = se_dev; dev->transport = transport; - atomic_set(&dev->active_cmds, 0); INIT_LIST_HEAD(&dev->dev_list); INIT_LIST_HEAD(&dev->dev_sep_list); INIT_LIST_HEAD(&dev->dev_tmr_list); @@ -1336,11 +1335,8 @@ struct se_device *transport_add_device_to_core_hba( INIT_LIST_HEAD(&dev->qf_cmd_list); spin_lock_init(&dev->execute_task_lock); spin_lock_init(&dev->delayed_cmd_lock); - spin_lock_init(&dev->state_task_lock); - spin_lock_init(&dev->dev_alua_lock); spin_lock_init(&dev->dev_reservation_lock); spin_lock_init(&dev->dev_status_lock); - spin_lock_init(&dev->dev_status_thr_lock); spin_lock_init(&dev->se_port_lock); spin_lock_init(&dev->se_tmr_lock); spin_lock_init(&dev->qf_cmd_lock); @@ -1952,8 +1948,6 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) * to allow the passed struct se_cmd list of tasks to the front of the list. */ if (cmd->sam_task_attr == MSG_HEAD_TAG) { - atomic_inc(&cmd->se_dev->dev_hoq_count); - smp_mb__after_atomic_inc(); pr_debug("Added HEAD_OF_QUEUE for CDB:" " 0x%02x, se_ordered_id: %u\n", cmd->t_task_cdb[0], @@ -3095,8 +3089,6 @@ static void transport_complete_task_attr(struct se_cmd *cmd) " SIMPLE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); } else if (cmd->sam_task_attr == MSG_HEAD_TAG) { - atomic_dec(&dev->dev_hoq_count); - smp_mb__after_atomic_dec(); dev->dev_cur_ordered_id++; pr_debug("Incremented dev_cur_ordered_id: %u for" " HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id, diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 3a21e2234d2b..098a15611aba 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -213,7 +213,6 @@ struct t10_alua_lu_gp { u16 lu_gp_id; int lu_gp_valid_id; u32 lu_gp_members; - atomic_t lu_gp_shutdown; atomic_t lu_gp_ref_cnt; spinlock_t lu_gp_lock; struct config_group lu_gp_group; @@ -679,9 +678,6 @@ struct se_subsystem_dev { } ____cacheline_aligned; struct se_device { - /* Set to 1 if thread is NOT sleeping on thread_sem */ - u8 thread_active; - u8 dev_status_timer_flags; /* RELATIVE TARGET PORT IDENTIFER Counter */ u16 dev_rpti_counter; /* Used for SAM Task Attribute ordering */ @@ -706,14 +702,10 @@ struct se_device { u64 write_bytes; spinlock_t stats_lock; /* Active commands on this virtual SE device */ - atomic_t active_cmds; atomic_t simple_cmds; atomic_t depth_left; atomic_t dev_ordered_id; - atomic_t dev_tur_active; atomic_t execute_tasks; - atomic_t dev_status_thr_count; - atomic_t dev_hoq_count; atomic_t dev_ordered_sync; atomic_t dev_qf_count; struct se_obj dev_obj; @@ -722,12 +714,8 @@ struct se_device { struct se_queue_obj dev_queue_obj; spinlock_t delayed_cmd_lock; spinlock_t execute_task_lock; - spinlock_t state_task_lock; - spinlock_t dev_alua_lock; spinlock_t dev_reservation_lock; - spinlock_t dev_state_lock; spinlock_t dev_status_lock; - spinlock_t dev_status_thr_lock; spinlock_t se_port_lock; spinlock_t se_tmr_lock; spinlock_t qf_cmd_lock; @@ -739,11 +727,8 @@ struct se_device { struct t10_pr_registration *dev_pr_res_holder; struct list_head dev_sep_list; struct list_head dev_tmr_list; - struct timer_list dev_status_timer; /* Pointer to descriptor for processing thread */ struct task_struct *process_thread; - pid_t process_thread_pid; - struct task_struct *dev_mgmt_thread; struct work_struct qf_work_queue; struct list_head delayed_cmd_list; struct list_head execute_task_list; @@ -756,8 +741,6 @@ struct se_device { struct se_subsystem_api *transport; /* Linked list for struct se_hba struct se_device list */ struct list_head dev_list; - /* Linked list for struct se_global->g_se_dev_list */ - struct list_head g_se_dev_list; } ____cacheline_aligned; struct se_hba { @@ -819,7 +802,6 @@ struct se_port { u32 sep_index; struct scsi_port_stats sep_stats; /* Used for ALUA Target Port Groups membership */ - atomic_t sep_tg_pt_gp_active; atomic_t sep_tg_pt_secondary_offline; /* Used for PR ALL_TG_PT=1 */ atomic_t sep_tg_pt_ref_cnt; From 9649fa1b8764f64c8cc4293e197e14cd46fe7205 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 28 Nov 2011 12:33:10 +0100 Subject: [PATCH 282/364] target/file: walk properly over sg list This patch changes fileio to use for_each_sg() when walking se_task->task_sg memory passed into from loopback LLD struct scsi_cmnd scatterlist memory. This addresses an issue where FILEIO backends with loopback where hitting the following OOPs with mkfs.ext2: |kernel BUG at include/linux/scatterlist.h:97! |invalid opcode: 0000 [#1] PREEMPT SMP |Modules linked in: sd_mod tcm_loop target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs scsi_mod | |Pid: 671, comm: LIO_fileio Not tainted 3.1.0-rc10+ #139 Bochs Bochs |EIP: 0060:[] EFLAGS: 00010202 CPU: 0 |EIP is at fd_do_task+0x396/0x420 [target_core_file] | [] __transport_execute_tasks+0xd4/0x190 [target_core_mod] | [] transport_execute_tasks+0x3c/0xf0 [target_core_mod] |EIP: [] fd_do_task+0x396/0x420 [target_core_file] SS:ESP 0068:dea47e90 Signed-off-by: Sebastian Andrzej Siewior Cc: Christoph Hellwig Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_file.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 38211322415e..b4864fba4ef0 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -289,9 +289,9 @@ static int fd_do_readv(struct se_task *task) return -ENOMEM; } - for (i = 0; i < task->task_sg_nents; i++) { - iov[i].iov_len = sg[i].length; - iov[i].iov_base = sg_virt(&sg[i]); + for_each_sg(task->task_sg, sg, task->task_sg_nents, i) { + iov[i].iov_len = sg->length; + iov[i].iov_base = sg_virt(sg); } old_fs = get_fs(); @@ -342,9 +342,9 @@ static int fd_do_writev(struct se_task *task) return -ENOMEM; } - for (i = 0; i < task->task_sg_nents; i++) { - iov[i].iov_len = sg[i].length; - iov[i].iov_base = sg_virt(&sg[i]); + for_each_sg(task->task_sg, sg, task->task_sg_nents, i) { + iov[i].iov_len = sg->length; + iov[i].iov_base = sg_virt(sg); } old_fs = get_fs(); From 6f21475576dde397cd2580262209d4080fbd5458 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 29 Nov 2011 03:29:59 -0500 Subject: [PATCH 283/364] target: remove the unused se_dev_list Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_configfs.c | 11 ----------- drivers/target/target_core_device.c | 1 - include/target/target_core_base.h | 1 - 3 files changed, 13 deletions(-) diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index e0c1e8a8dd4e..93d4f6a1b798 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -67,9 +67,6 @@ static struct config_group target_core_hbagroup; static struct config_group alua_group; static struct config_group alua_lu_gps_group; -static DEFINE_SPINLOCK(se_device_lock); -static LIST_HEAD(se_dev_list); - static inline struct se_hba * item_to_hba(struct config_item *item) { @@ -2741,7 +2738,6 @@ static struct config_group *target_core_make_subdev( " struct se_subsystem_dev\n"); goto unlock; } - INIT_LIST_HEAD(&se_dev->se_dev_node); INIT_LIST_HEAD(&se_dev->t10_wwn.t10_vpd_list); spin_lock_init(&se_dev->t10_wwn.t10_vpd_lock); INIT_LIST_HEAD(&se_dev->t10_pr.registration_list); @@ -2777,9 +2773,6 @@ static struct config_group *target_core_make_subdev( " from allocate_virtdevice()\n"); goto out; } - spin_lock(&se_device_lock); - list_add_tail(&se_dev->se_dev_node, &se_dev_list); - spin_unlock(&se_device_lock); config_group_init_type_name(&se_dev->se_dev_group, name, &target_core_dev_cit); @@ -2874,10 +2867,6 @@ static void target_core_drop_subdev( mutex_lock(&hba->hba_access_mutex); t = hba->transport; - spin_lock(&se_device_lock); - list_del(&se_dev->se_dev_node); - spin_unlock(&se_device_lock); - dev_stat_grp = &se_dev->dev_stat_grps.stat_group; for (i = 0; dev_stat_grp->default_groups[i]; i++) { df_item = &dev_stat_grp->default_groups[i]->cg_item; diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index dd5adb82e3df..e2be1f510da8 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -1584,7 +1584,6 @@ int core_dev_setup_virtual_lun0(void) ret = -ENOMEM; goto out; } - INIT_LIST_HEAD(&se_dev->se_dev_node); INIT_LIST_HEAD(&se_dev->t10_wwn.t10_vpd_list); spin_lock_init(&se_dev->t10_wwn.t10_vpd_lock); INIT_LIST_HEAD(&se_dev->t10_pr.registration_list); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 098a15611aba..6873c7dd9145 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -669,7 +669,6 @@ struct se_subsystem_dev { struct t10_reservation t10_pr; spinlock_t se_dev_lock; void *se_dev_su_ptr; - struct list_head se_dev_node; struct config_group se_dev_group; /* For T10 Reservations */ struct config_group se_dev_pr_group; From 5bff9e8584fbcdb361dada5a0425724b9e31e608 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 25 Nov 2011 22:18:45 +0100 Subject: [PATCH 284/364] target/rd: simplify the page/offset computation Breakout rd_MEMCPY_do_task() usage of do_div() to tmp value during rd_request->rd_page assignment. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_rd.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index 6d8a6881cfff..6119ed5a3311 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -583,14 +583,12 @@ static int rd_MEMCPY_do_task(struct se_task *task) { struct se_device *dev = task->task_se_cmd->se_dev; struct rd_request *req = RD_REQ(task); - unsigned long long lba; + u64 tmp; int ret; - req->rd_page = (task->task_lba * dev->se_sub_dev->se_dev_attrib.block_size) / PAGE_SIZE; - lba = task->task_lba; - req->rd_offset = (do_div(lba, - (PAGE_SIZE / dev->se_sub_dev->se_dev_attrib.block_size))) * - dev->se_sub_dev->se_dev_attrib.block_size; + tmp = task->task_lba * dev->se_sub_dev->se_dev_attrib.block_size; + req->rd_offset = do_div(tmp, PAGE_SIZE); + req->rd_page = tmp; req->rd_size = task->task_size; if (task->task_data_direction == DMA_FROM_DEVICE) From 65b0c78d5a0ca2cb82b7b9f54f855896e0d7fc10 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 30 Nov 2011 10:48:30 +0100 Subject: [PATCH 285/364] target/rd: fix or rewrite the copy routine So the code assumes that the sg list is only a array while in reality loopback SGL memory via scsi_cmnd into target-core may be already chained. This patch converts ramdisk code to use sg_miter logic from scatterlist.h in order to properly support passthrough SGL usage with transport_generic_map_mem_to_cmd() via loopback. With this patch the bug goes away. However after umount/mount of the device my files are gone. So something is still not right. After looking at it for a while I decided to rewrite the that part of the code and now things do work for me. For reference: - http://article.gmane.org/gmane.linux.scsi.target.devel/595 the sg_next() conversion - http://article.gmane.org/gmane.linux.scsi.target.devel/602 the rewrite of the copy code (nab: Fix compile warning in rd_MEMCPY) Signed-off-by: Sebastian Andrzej Siewior Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_rd.c | 245 ++++++-------------------------- 1 file changed, 40 insertions(+), 205 deletions(-) diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index 6119ed5a3311..02e51faa2f4e 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -343,235 +343,74 @@ static struct rd_dev_sg_table *rd_get_sg_table(struct rd_dev *rd_dev, u32 page) return NULL; } -/* rd_MEMCPY_read(): - * - * - */ -static int rd_MEMCPY_read(struct rd_request *req) +static int rd_MEMCPY(struct rd_request *req, u32 read_rd) { struct se_task *task = &req->rd_task; struct rd_dev *dev = req->rd_task.task_se_cmd->se_dev->dev_ptr; struct rd_dev_sg_table *table; - struct scatterlist *sg_d, *sg_s; - void *dst, *src; - u32 i = 0, j = 0, dst_offset = 0, src_offset = 0; - u32 length, page_end = 0, table_sg_end; + struct scatterlist *rd_sg; + struct sg_mapping_iter m; u32 rd_offset = req->rd_offset; + u32 src_len; table = rd_get_sg_table(dev, req->rd_page); if (!table) return -EINVAL; - table_sg_end = (table->page_end_offset - req->rd_page); - sg_d = task->task_sg; - sg_s = &table->sg_table[req->rd_page - table->page_start_offset]; + rd_sg = &table->sg_table[req->rd_page - table->page_start_offset]; - pr_debug("RD[%u]: Read LBA: %llu, Size: %u Page: %u, Offset:" - " %u\n", dev->rd_dev_id, task->task_lba, req->rd_size, - req->rd_page, req->rd_offset); - - src_offset = rd_offset; + pr_debug("RD[%u]: %s LBA: %llu, Size: %u Page: %u, Offset: %u\n", + dev->rd_dev_id, read_rd ? "Read" : "Write", + task->task_lba, req->rd_size, req->rd_page, + rd_offset); + src_len = PAGE_SIZE - rd_offset; + sg_miter_start(&m, task->task_sg, task->task_sg_nents, + read_rd ? SG_MITER_TO_SG : SG_MITER_FROM_SG); while (req->rd_size) { - if ((sg_d[i].length - dst_offset) < - (sg_s[j].length - src_offset)) { - length = (sg_d[i].length - dst_offset); + u32 len; + void *rd_addr; - pr_debug("Step 1 - sg_d[%d]: %p length: %d" - " offset: %u sg_s[%d].length: %u\n", i, - &sg_d[i], sg_d[i].length, sg_d[i].offset, j, - sg_s[j].length); - pr_debug("Step 1 - length: %u dst_offset: %u" - " src_offset: %u\n", length, dst_offset, - src_offset); + sg_miter_next(&m); + len = min((u32)m.length, src_len); + m.consumed = len; - if (length > req->rd_size) - length = req->rd_size; + rd_addr = sg_virt(rd_sg) + rd_offset; - dst = sg_virt(&sg_d[i++]) + dst_offset; - BUG_ON(!dst); + if (read_rd) + memcpy(m.addr, rd_addr, len); + else + memcpy(rd_addr, m.addr, len); - src = sg_virt(&sg_s[j]) + src_offset; - BUG_ON(!src); - - dst_offset = 0; - src_offset = length; - page_end = 0; - } else { - length = (sg_s[j].length - src_offset); - - pr_debug("Step 2 - sg_d[%d]: %p length: %d" - " offset: %u sg_s[%d].length: %u\n", i, - &sg_d[i], sg_d[i].length, sg_d[i].offset, - j, sg_s[j].length); - pr_debug("Step 2 - length: %u dst_offset: %u" - " src_offset: %u\n", length, dst_offset, - src_offset); - - if (length > req->rd_size) - length = req->rd_size; - - dst = sg_virt(&sg_d[i]) + dst_offset; - BUG_ON(!dst); - - if (sg_d[i].length == length) { - i++; - dst_offset = 0; - } else - dst_offset = length; - - src = sg_virt(&sg_s[j++]) + src_offset; - BUG_ON(!src); - - src_offset = 0; - page_end = 1; - } - - memcpy(dst, src, length); - - pr_debug("page: %u, remaining size: %u, length: %u," - " i: %u, j: %u\n", req->rd_page, - (req->rd_size - length), length, i, j); - - req->rd_size -= length; + req->rd_size -= len; if (!req->rd_size) - return 0; - - if (!page_end) continue; - if (++req->rd_page <= table->page_end_offset) { - pr_debug("page: %u in same page table\n", - req->rd_page); + src_len -= len; + if (src_len) { + rd_offset += len; continue; } - pr_debug("getting new page table for page: %u\n", - req->rd_page); + /* rd page completed, next one please */ + req->rd_page++; + rd_offset = 0; + src_len = PAGE_SIZE; + if (req->rd_page <= table->page_end_offset) { + rd_sg++; + continue; + } table = rd_get_sg_table(dev, req->rd_page); - if (!table) + if (!table) { + sg_miter_stop(&m); return -EINVAL; - - sg_s = &table->sg_table[j = 0]; - } - - return 0; -} - -/* rd_MEMCPY_write(): - * - * - */ -static int rd_MEMCPY_write(struct rd_request *req) -{ - struct se_task *task = &req->rd_task; - struct rd_dev *dev = req->rd_task.task_se_cmd->se_dev->dev_ptr; - struct rd_dev_sg_table *table; - struct scatterlist *sg_d, *sg_s; - void *dst, *src; - u32 i = 0, j = 0, dst_offset = 0, src_offset = 0; - u32 length, page_end = 0, table_sg_end; - u32 rd_offset = req->rd_offset; - - table = rd_get_sg_table(dev, req->rd_page); - if (!table) - return -EINVAL; - - table_sg_end = (table->page_end_offset - req->rd_page); - sg_d = &table->sg_table[req->rd_page - table->page_start_offset]; - sg_s = task->task_sg; - - pr_debug("RD[%d] Write LBA: %llu, Size: %u, Page: %u," - " Offset: %u\n", dev->rd_dev_id, task->task_lba, req->rd_size, - req->rd_page, req->rd_offset); - - dst_offset = rd_offset; - - while (req->rd_size) { - if ((sg_s[i].length - src_offset) < - (sg_d[j].length - dst_offset)) { - length = (sg_s[i].length - src_offset); - - pr_debug("Step 1 - sg_s[%d]: %p length: %d" - " offset: %d sg_d[%d].length: %u\n", i, - &sg_s[i], sg_s[i].length, sg_s[i].offset, - j, sg_d[j].length); - pr_debug("Step 1 - length: %u src_offset: %u" - " dst_offset: %u\n", length, src_offset, - dst_offset); - - if (length > req->rd_size) - length = req->rd_size; - - src = sg_virt(&sg_s[i++]) + src_offset; - BUG_ON(!src); - - dst = sg_virt(&sg_d[j]) + dst_offset; - BUG_ON(!dst); - - src_offset = 0; - dst_offset = length; - page_end = 0; - } else { - length = (sg_d[j].length - dst_offset); - - pr_debug("Step 2 - sg_s[%d]: %p length: %d" - " offset: %d sg_d[%d].length: %u\n", i, - &sg_s[i], sg_s[i].length, sg_s[i].offset, - j, sg_d[j].length); - pr_debug("Step 2 - length: %u src_offset: %u" - " dst_offset: %u\n", length, src_offset, - dst_offset); - - if (length > req->rd_size) - length = req->rd_size; - - src = sg_virt(&sg_s[i]) + src_offset; - BUG_ON(!src); - - if (sg_s[i].length == length) { - i++; - src_offset = 0; - } else - src_offset = length; - - dst = sg_virt(&sg_d[j++]) + dst_offset; - BUG_ON(!dst); - - dst_offset = 0; - page_end = 1; } - memcpy(dst, src, length); - - pr_debug("page: %u, remaining size: %u, length: %u," - " i: %u, j: %u\n", req->rd_page, - (req->rd_size - length), length, i, j); - - req->rd_size -= length; - if (!req->rd_size) - return 0; - - if (!page_end) - continue; - - if (++req->rd_page <= table->page_end_offset) { - pr_debug("page: %u in same page table\n", - req->rd_page); - continue; - } - - pr_debug("getting new page table for page: %u\n", - req->rd_page); - - table = rd_get_sg_table(dev, req->rd_page); - if (!table) - return -EINVAL; - - sg_d = &table->sg_table[j = 0]; + /* since we increment, the first sg entry is correct */ + rd_sg = table->sg_table; } - + sg_miter_stop(&m); return 0; } @@ -591,11 +430,7 @@ static int rd_MEMCPY_do_task(struct se_task *task) req->rd_page = tmp; req->rd_size = task->task_size; - if (task->task_data_direction == DMA_FROM_DEVICE) - ret = rd_MEMCPY_read(req); - else - ret = rd_MEMCPY_write(req); - + ret = rd_MEMCPY(req, task->task_data_direction == DMA_FROM_DEVICE); if (ret != 0) return ret; From c638830d040696ff2bae07785fd4277e7e3fe7c4 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Wed, 30 Nov 2011 12:11:50 -0800 Subject: [PATCH 286/364] target: Don't return an error if disabling unsupported features If an attribute is present (but not yet supported) it should be OK to write 0 (a no-op) to the attribute. This is an issue because userspace should be able to save and restore all set attribute values without error. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index e2be1f510da8..9b8639425472 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -954,8 +954,12 @@ int se_dev_set_emulate_dpo(struct se_device *dev, int flag) return -EINVAL; } - pr_err("dpo_emulated not supported\n"); - return -EINVAL; + if (flag) { + pr_err("dpo_emulated not supported\n"); + return -EINVAL; + } + + return 0; } int se_dev_set_emulate_fua_write(struct se_device *dev, int flag) @@ -965,7 +969,7 @@ int se_dev_set_emulate_fua_write(struct se_device *dev, int flag) return -EINVAL; } - if (dev->transport->fua_write_emulated == 0) { + if (flag && dev->transport->fua_write_emulated == 0) { pr_err("fua_write_emulated not supported\n"); return -EINVAL; } @@ -982,8 +986,12 @@ int se_dev_set_emulate_fua_read(struct se_device *dev, int flag) return -EINVAL; } - pr_err("ua read emulated not supported\n"); - return -EINVAL; + if (flag) { + pr_err("ua read emulated not supported\n"); + return -EINVAL; + } + + return 0; } int se_dev_set_emulate_write_cache(struct se_device *dev, int flag) @@ -992,7 +1000,7 @@ int se_dev_set_emulate_write_cache(struct se_device *dev, int flag) pr_err("Illegal value %d\n", flag); return -EINVAL; } - if (dev->transport->write_cache_emulated == 0) { + if (flag && dev->transport->write_cache_emulated == 0) { pr_err("write_cache_emulated not supported\n"); return -EINVAL; } @@ -1053,7 +1061,7 @@ int se_dev_set_emulate_tpu(struct se_device *dev, int flag) * We expect this value to be non-zero when generic Block Layer * Discard supported is detected iblock_create_virtdevice(). */ - if (!dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { + if (flag && !dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { pr_err("Generic Block Discard not supported\n"); return -ENOSYS; } @@ -1074,7 +1082,7 @@ int se_dev_set_emulate_tpws(struct se_device *dev, int flag) * We expect this value to be non-zero when generic Block Layer * Discard supported is detected iblock_create_virtdevice(). */ - if (!dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { + if (flag && !dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { pr_err("Generic Block Discard not supported\n"); return -ENOSYS; } From ddca8f3ed36c5d25363dab6762829868af09cb02 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 6 Dec 2011 05:24:19 +0000 Subject: [PATCH 287/364] iscsi-target: Fix hex2bin warn_unused compile message MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compile warning with hex2bin() usage: drivers/target/iscsi/iscsi_target_auth.c: In function ‘chap_string_to_hex’: drivers/target/iscsi/iscsi_target_auth.c:35: warning: ignoring return value of ‘hex2bin’, declared with attribute warn_unused_result Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_auth.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_auth.c b/drivers/target/iscsi/iscsi_target_auth.c index beb39469e7f1..1cd6ce373b83 100644 --- a/drivers/target/iscsi/iscsi_target_auth.c +++ b/drivers/target/iscsi/iscsi_target_auth.c @@ -30,9 +30,11 @@ static int chap_string_to_hex(unsigned char *dst, unsigned char *src, int len) { - int j = DIV_ROUND_UP(len, 2); + int j = DIV_ROUND_UP(len, 2), rc; - hex2bin(dst, src, j); + rc = hex2bin(dst, src, j); + if (rc < 0) + pr_debug("CHAP string contains non hex digit symbols\n"); dst[j] = '\0'; return j; From cefcc03ffc9527dde56807339edb1719c8dbae5f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 5 Dec 2011 20:50:45 +0000 Subject: [PATCH 288/364] ASoC: Provide a more complete DMA driver stub Allow userspace applications to do more parameter setting by providing a more complete stub DMA driver specifying a wildcard set of formats and channels and essentially random values for the DMA parameters. This is required for useful runtime operation of the dummy DMA driver until we are able to figure out how to power up links and do hw_params() from DAPM. Sending to stable as without this the dummy driver is not terribly useful. Reported-by: Kyung-Kwee Ryu Tested-by: Kyung-Kwee Ryu Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/soc-utils.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-utils.c b/sound/soc/soc-utils.c index 0c12b98484bd..4220bb0f2730 100644 --- a/sound/soc/soc-utils.c +++ b/sound/soc/soc-utils.c @@ -58,7 +58,36 @@ int snd_soc_params_to_bclk(struct snd_pcm_hw_params *params) } EXPORT_SYMBOL_GPL(snd_soc_params_to_bclk); -static struct snd_soc_platform_driver dummy_platform; +static const struct snd_pcm_hardware dummy_dma_hardware = { + .formats = 0xffffffff, + .channels_min = 1, + .channels_max = UINT_MAX, + + /* Random values to keep userspace happy when checking constraints */ + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER, + .buffer_bytes_max = 128*1024, + .period_bytes_min = PAGE_SIZE, + .period_bytes_max = PAGE_SIZE*2, + .periods_min = 2, + .periods_max = 128, +}; + +static int dummy_dma_open(struct snd_pcm_substream *substream) +{ + snd_soc_set_runtime_hwparams(substream, &dummy_dma_hardware); + + return 0; +} + +static struct snd_pcm_ops dummy_dma_ops = { + .open = dummy_dma_open, + .ioctl = snd_pcm_lib_ioctl, +}; + +static struct snd_soc_platform_driver dummy_platform = { + .ops = &dummy_dma_ops, +}; static __devinit int snd_soc_dummy_probe(struct platform_device *pdev) { From 96f176a310e447966e45112fe4511b9d9fa0caf4 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 6 Dec 2011 11:17:34 +0100 Subject: [PATCH 289/364] iommu/msm: Fix compile error in mach-msm/devices-iommu.c Fix compile error due to missing include. Signed-off-by: Joerg Roedel --- arch/arm/mach-msm/devices-iommu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c index 24030d0da6e3..0fb7a17df398 100644 --- a/arch/arm/mach-msm/devices-iommu.c +++ b/arch/arm/mach-msm/devices-iommu.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include From dd13752537d36cc6c145cb040f71ce7acda31e6e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 5 Dec 2011 23:14:39 +0000 Subject: [PATCH 290/364] x86/intel_mid: Fix the Kconfig for MID selection We currently fail to build on CONFIG_X86_INTEL_MID=y and CONFIG_X86_MRST unset. We could build all the bits to make generic MID work if you picked MID platform alone but that's really silly. Instead use select and two variables. This looks a bit daft right now but once we add a Medfield selection it'll start to look a good deal more sensible. Reported-by: Ingo Molnar Reported-by: Stanislaw Gruszka Signed-off-by: Alan Cox Link: http://lkml.kernel.org/r/20111205231433.28811.51297.stgit@bob.linux.org.uk Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cb9a1044a771..5553f9f1a70d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -390,7 +390,7 @@ config X86_INTEL_CE This option compiles in support for the CE4100 SOC for settop boxes and media devices. -config X86_INTEL_MID +config X86_WANT_INTEL_MID bool "Intel MID platform support" depends on X86_32 depends on X86_EXTENDED_PLATFORM @@ -399,7 +399,7 @@ config X86_INTEL_MID systems which do not have the PCI legacy interfaces (Moorestown, Medfield). If you are building for a PC class system say N here. -if X86_INTEL_MID +if X86_WANT_INTEL_MID config X86_MRST bool "Moorestown MID platform" @@ -411,6 +411,7 @@ config X86_MRST select SPI select INTEL_SCU_IPC select X86_PLATFORM_DEVICES + select X86_INTEL_MID ---help--- Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. Moorestown consists of two chips: From d68fb11c3dae75c8331538dcf083a65e697cc034 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 Dec 2011 21:16:06 +0100 Subject: [PATCH 291/364] ptp: Fix clock_getres() implementation The clock_getres() function must return the resolution in the timespec argument and return 0 for success. Signed-off-by: Thomas Gleixner Acked-by: John Stultz Cc: stable@kernel.org Cc: Richard Cochran --- drivers/ptp/ptp_clock.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c index cf3f9997546d..10451a15e828 100644 --- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -101,7 +101,9 @@ static s32 scaled_ppm_to_ppb(long ppm) static int ptp_clock_getres(struct posix_clock *pc, struct timespec *tp) { - return 1; /* always round timer functions to one nanosecond */ + tp->tv_sec = 0; + tp->tv_nsec = 1; + return 0; } static int ptp_clock_settime(struct posix_clock *pc, const struct timespec *tp) From c9c024b3f3e07d087974db4c0dc46217fff3a6c0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 Dec 2011 21:20:23 +0100 Subject: [PATCH 292/364] alarmtimers: Fix time comparison The expiry function compares the timer against current time and does not expire the timer when the expiry time is >= now. That's wrong. If the timer is set for now, then it must expire. Make the condition expiry > now for breaking out the loop. Signed-off-by: Thomas Gleixner Acked-by: John Stultz Cc: stable@kernel.org --- kernel/time/alarmtimer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index c436e790b21b..8a46f5d64504 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -195,7 +195,7 @@ static enum hrtimer_restart alarmtimer_fired(struct hrtimer *timer) struct alarm *alarm; ktime_t expired = next->expires; - if (expired.tv64 >= now.tv64) + if (expired.tv64 > now.tv64) break; alarm = container_of(next, struct alarm, node); From 6340cfed48c478cf67451ddcd2daa3438e642632 Mon Sep 17 00:00:00 2001 From: Andrew Vagin Date: Mon, 28 Nov 2011 12:03:29 +0300 Subject: [PATCH 293/364] perf header: Use event_name() to get an event name perf_evsel.name may be not initialized Cc: David Ahern Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Arun Sharma Cc: devel@openvz.org Link: http://lkml.kernel.org/r/1322471015-107825-2-git-send-email-avagin@openvz.org Signed-off-by: Andrew Vagin Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index bcd05d05b4f0..33c17a2b2a81 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -388,7 +388,7 @@ static int write_event_desc(int fd, struct perf_header *h __used, /* * write event string as passed on cmdline */ - ret = do_write_string(fd, attr->name); + ret = do_write_string(fd, event_name(attr)); if (ret < 0) return ret; /* From f1a73746c6664442082e3d53e1804f46e1910436 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 4 Dec 2011 13:44:06 +0100 Subject: [PATCH 294/364] ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs Some HP laptops with IDT 92HD75 codecs may use a GPIO > 4 for the mute LED, but currently the driver doesn't check this properly, and confuses the mute LED behavior. This ended up with the silent output on some HP laptops due to having another GPIO used as external amp control. This patch fixes the problem by checking the max GPIO count and comparing with the given value from DMI entry instead of magic fixed value 4 and 8, and adding a new field to indicate the VREF mute-LED behavior. Reported-and-tested-by: Vitaliy Kulikov Cc: [v3.1] Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 45 ++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 21 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index f3658658548e..e035cf6de278 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -215,6 +215,7 @@ struct sigmatel_spec { unsigned int gpio_mute; unsigned int gpio_led; unsigned int gpio_led_polarity; + unsigned int vref_mute_led_nid; /* pin NID for mute-LED vref control */ unsigned int vref_led; /* stream */ @@ -4318,12 +4319,10 @@ static void stac_store_hints(struct hda_codec *codec) spec->eapd_switch = val; get_int_hint(codec, "gpio_led_polarity", &spec->gpio_led_polarity); if (get_int_hint(codec, "gpio_led", &spec->gpio_led)) { - if (spec->gpio_led <= 8) { - spec->gpio_mask |= spec->gpio_led; - spec->gpio_dir |= spec->gpio_led; - if (spec->gpio_led_polarity) - spec->gpio_data |= spec->gpio_led; - } + spec->gpio_mask |= spec->gpio_led; + spec->gpio_dir |= spec->gpio_led; + if (spec->gpio_led_polarity) + spec->gpio_data |= spec->gpio_led; } } @@ -4913,8 +4912,14 @@ static int find_mute_led_gpio(struct hda_codec *codec, int default_polarity) if (sscanf(dev->name, "HP_Mute_LED_%d_%x", &spec->gpio_led_polarity, &spec->gpio_led) == 2) { - if (spec->gpio_led < 4) + unsigned int max_gpio; + max_gpio = snd_hda_param_read(codec, codec->afg, + AC_PAR_GPIO_CAP); + max_gpio &= AC_GPIO_IO_COUNT; + if (spec->gpio_led < max_gpio) spec->gpio_led = 1 << spec->gpio_led; + else + spec->vref_mute_led_nid = spec->gpio_led; return 1; } if (sscanf(dev->name, "HP_Mute_LED_%d", @@ -5043,15 +5048,12 @@ static int stac92xx_pre_resume(struct hda_codec *codec) struct sigmatel_spec *spec = codec->spec; /* sync mute LED */ - if (spec->gpio_led) { - if (spec->gpio_led <= 8) { - stac_gpio_set(codec, spec->gpio_mask, - spec->gpio_dir, spec->gpio_data); - } else { - stac_vrefout_set(codec, - spec->gpio_led, spec->vref_led); - } - } + if (spec->vref_mute_led_nid) + stac_vrefout_set(codec, spec->vref_mute_led_nid, + spec->vref_led); + else if (spec->gpio_led) + stac_gpio_set(codec, spec->gpio_mask, + spec->gpio_dir, spec->gpio_data); return 0; } @@ -5076,7 +5078,7 @@ static void stac92xx_set_power_state(struct hda_codec *codec, hda_nid_t fg, struct sigmatel_spec *spec = codec->spec; if (power_state == AC_PWRST_D3) { - if (spec->gpio_led > 8) { + if (spec->vref_mute_led_nid) { /* with vref-out pin used for mute led control * codec AFG is prevented from D3 state */ @@ -5129,7 +5131,7 @@ static int stac92xx_update_led_status(struct hda_codec *codec) } } /*polarity defines *not* muted state level*/ - if (spec->gpio_led <= 8) { + if (!spec->vref_mute_led_nid) { if (muted) spec->gpio_data &= ~spec->gpio_led; /* orange */ else @@ -5147,7 +5149,8 @@ static int stac92xx_update_led_status(struct hda_codec *codec) muted_lvl = spec->gpio_led_polarity ? AC_PINCTL_VREF_GRD : AC_PINCTL_VREF_HIZ; spec->vref_led = muted ? muted_lvl : notmtd_lvl; - stac_vrefout_set(codec, spec->gpio_led, spec->vref_led); + stac_vrefout_set(codec, spec->vref_mute_led_nid, + spec->vref_led); } return 0; } @@ -5661,7 +5664,7 @@ again: #ifdef CONFIG_SND_HDA_POWER_SAVE if (spec->gpio_led) { - if (spec->gpio_led <= 8) { + if (!spec->vref_mute_led_nid) { spec->gpio_mask |= spec->gpio_led; spec->gpio_dir |= spec->gpio_led; spec->gpio_data |= spec->gpio_led; @@ -5976,7 +5979,7 @@ again: #ifdef CONFIG_SND_HDA_POWER_SAVE if (spec->gpio_led) { - if (spec->gpio_led <= 8) { + if (!spec->vref_mute_led_nid) { spec->gpio_mask |= spec->gpio_led; spec->gpio_dir |= spec->gpio_led; spec->gpio_data |= spec->gpio_led; From a020428364485751b607105c8f5a608f9b1fd38b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 6 Dec 2011 13:17:23 +0100 Subject: [PATCH 295/364] ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index ea1f157ca38b..eeb25d529e30 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4442,7 +4442,7 @@ static int stac92xx_init(struct hda_codec *codec) /* power on when no jack detection is available */ /* or when the VREF is used for controlling LED */ if (!spec->hp_detect || - (spec->gpio_led > 8 && spec->gpio_led == nid)) { + spec->vref_mute_led_nid == nid) { stac_toggle_power_map(codec, nid, 1); continue; } From 4e2b1c4f56227c742bbd2ea8e8f559567eb80c3f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 6 Dec 2011 13:28:22 +0000 Subject: [PATCH 296/364] x86/intel_mid: Kconfig select fix If we select a symbol it should have a type declared first otherwise in some situations the config tools get upset. They are currently perhaps a bit too resilient which is why this wasn't noticed initially. Signed-off-by: Alan Cox Link: http://lkml.kernel.org/r/20111206132811.4041.32549.stgit@bob.linux.org.uk Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5553f9f1a70d..efb42949cc09 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -401,6 +401,9 @@ config X86_WANT_INTEL_MID if X86_WANT_INTEL_MID +config X86_INTEL_MID + bool + config X86_MRST bool "Moorestown MID platform" depends on PCI From 89e0b9a3fd66d72f2d7b7f2d6d86fa56997cde27 Mon Sep 17 00:00:00 2001 From: Sedat Dilek Date: Mon, 5 Dec 2011 23:08:32 +0100 Subject: [PATCH 297/364] iommu/amd: Fix typo in kernel-parameters.txt Signed-off-by: Sedat Dilek Signed-off-by: Joerg Roedel --- Documentation/kernel-parameters.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a0c5c5f4fce6..da5037766eed 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -320,7 +320,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. on: enable for both 32- and 64-bit processes off: disable for both 32- and 64-bit processes - amd_iommu= [HW,X86-84] + amd_iommu= [HW,X86-64] Pass parameters to the AMD IOMMU driver in the system. Possible values are: fullflush - enable flushing of IO/TLB entries when From c29f7d457ac63311feb11928a866efd2fe153d74 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 30 Nov 2011 08:58:18 +0000 Subject: [PATCH 298/364] xfs: fix nfs export of 64-bit inodes numbers on 32-bit kernels The i_ino field in the VFS inode is of type unsigned long and thus can't hold the full 64-bit inode number on 32-bit kernels. We have the full inode number in the XFS inode, so use that one for nfs exports. Note that I've also switched the 32-bit file handles types to it, just to make the code more consistent and copy & paste errors less likely to happen. Reported-by: Guoquan Yang Reported-by: Hank Peng Signed-off-by: Christoph Hellwig Signed-off-by: Ben Myers --- fs/xfs/xfs_export.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c index da108977b21f..558910f5e3c0 100644 --- a/fs/xfs/xfs_export.c +++ b/fs/xfs/xfs_export.c @@ -98,22 +98,22 @@ xfs_fs_encode_fh( switch (fileid_type) { case FILEID_INO32_GEN_PARENT: spin_lock(&dentry->d_lock); - fid->i32.parent_ino = dentry->d_parent->d_inode->i_ino; + fid->i32.parent_ino = XFS_I(dentry->d_parent->d_inode)->i_ino; fid->i32.parent_gen = dentry->d_parent->d_inode->i_generation; spin_unlock(&dentry->d_lock); /*FALLTHRU*/ case FILEID_INO32_GEN: - fid->i32.ino = inode->i_ino; + fid->i32.ino = XFS_I(inode)->i_ino; fid->i32.gen = inode->i_generation; break; case FILEID_INO32_GEN_PARENT | XFS_FILEID_TYPE_64FLAG: spin_lock(&dentry->d_lock); - fid64->parent_ino = dentry->d_parent->d_inode->i_ino; + fid64->parent_ino = XFS_I(dentry->d_parent->d_inode)->i_ino; fid64->parent_gen = dentry->d_parent->d_inode->i_generation; spin_unlock(&dentry->d_lock); /*FALLTHRU*/ case FILEID_INO32_GEN | XFS_FILEID_TYPE_64FLAG: - fid64->ino = inode->i_ino; + fid64->ino = XFS_I(inode)->i_ino; fid64->gen = inode->i_generation; break; } From a33caeb118198286309859f014c0662f3ed54ed4 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Wed, 9 Nov 2011 16:04:51 +0800 Subject: [PATCH 299/364] lockdep, kmemcheck: Annotate ->lock in lockdep_init_map() Since commit f59de89 ("lockdep: Clear whole lockdep_map on initialization"), lockdep_init_map() will clear all the struct. But it will break lock_set_class()/lock_set_subclass(). A typical race condition is like below: CPU A CPU B lock_set_subclass(lockA); lock_set_class(lockA); lockdep_init_map(lockA); /* lockA->name is cleared */ memset(lockA); __lock_acquire(lockA); /* lockA->class_cache[] is cleared */ register_lock_class(lockA); look_up_lock_class(lockA); WARN_ON_ONCE(class->name != lock->name); lock->name = name; So restore to what we have done before commit f59de89 but annotate ->lock with kmemcheck_mark_initialized() to suppress the kmemcheck warning reported in commit f59de89. Reported-by: Sergey Senozhatsky Reported-by: Borislav Petkov Suggested-by: Vegard Nossum Signed-off-by: Yong Zhang Cc: Tejun Heo Cc: David Rientjes Cc: Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111109080451.GB8124@zhy Signed-off-by: Ingo Molnar --- kernel/lockdep.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index e69434b070da..b2e08c932d91 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -44,6 +44,7 @@ #include #include #include +#include #include @@ -2948,7 +2949,12 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this, void lockdep_init_map(struct lockdep_map *lock, const char *name, struct lock_class_key *key, int subclass) { - memset(lock, 0, sizeof(*lock)); + int i; + + kmemcheck_mark_initialized(lock, sizeof(*lock)); + + for (i = 0; i < NR_LOCKDEP_CACHING_CLASSES; i++) + lock->class_cache[i] = NULL; #ifdef CONFIG_LOCK_STAT lock->cpu = raw_smp_processor_id(); From 99b53bdd810611cc178e1a86bc112d8f4f56a1e9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Peter=20Pan=28=E6=BD=98=E5=8D=AB=E5=B9=B3=29?= Date: Mon, 5 Dec 2011 21:39:41 +0000 Subject: [PATCH 300/364] ipv4:correct description for tcp_max_syn_backlog Since commit c5ed63d66f24(tcp: fix three tcp sysctls tuning), sysctl_max_syn_backlog is determined by tcp_hashinfo->ehash_mask, and the minimal value is 128, and it will increase in proportion to the memory of machine. The original description for tcp_max_syn_backlog and sysctl_max_syn_backlog are out of date. Changelog: V2: update description for sysctl_max_syn_backlog Signed-off-by: Weiping Pan Reviewed-by: Shan Wei Acked-by: Neil Horman Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 10 +++++----- net/core/request_sock.c | 7 ++++--- 2 files changed, 9 insertions(+), 8 deletions(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index f049a1ca186f..589f2da5d545 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -282,11 +282,11 @@ tcp_max_ssthresh - INTEGER Default: 0 (off) tcp_max_syn_backlog - INTEGER - Maximal number of remembered connection requests, which are - still did not receive an acknowledgment from connecting client. - Default value is 1024 for systems with more than 128Mb of memory, - and 128 for low memory machines. If server suffers of overload, - try to increase this number. + Maximal number of remembered connection requests, which have not + received an acknowledgment from connecting client. + The minimal value is 128 for low memory machines, and it will + increase in proportion to the memory of machine. + If server suffers from overload, try increasing this number. tcp_max_tw_buckets - INTEGER Maximal number of timewait sockets held by system simultaneously. diff --git a/net/core/request_sock.c b/net/core/request_sock.c index 182236b2510a..9b570a6a33c5 100644 --- a/net/core/request_sock.c +++ b/net/core/request_sock.c @@ -26,10 +26,11 @@ * but then some measure against one socket starving all other sockets * would be needed. * - * It was 128 by default. Experiments with real servers show, that + * The minimum value of it is 128. Experiments with real servers show that * it is absolutely not enough even at 100conn/sec. 256 cures most - * of problems. This value is adjusted to 128 for very small machines - * (<=32Mb of memory) and to 1024 on normal or better ones (>=256Mb). + * of problems. + * This value is adjusted to 128 for low memory machines, + * and it will increase in proportion to the memory of machine. * Note : Dont forget somaxconn that may limit backlog too. */ int sysctl_max_syn_backlog = 256; From 681090902eeb459a829f6f93d378a82011af3c89 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 6 Dec 2011 08:04:40 +0000 Subject: [PATCH 301/364] net: Silence seq_scale() unused warning On a CONFIG_NET=y build net/core/secure_seq.c:22: warning: 'seq_scale' defined but not used Signed-off-by: Stephen Boyd Signed-off-by: David S. Miller --- net/core/secure_seq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c index 025233de25f9..925991ae6f52 100644 --- a/net/core/secure_seq.c +++ b/net/core/secure_seq.c @@ -19,6 +19,7 @@ static int __init net_secret_init(void) } late_initcall(net_secret_init); +#ifdef CONFIG_INET static u32 seq_scale(u32 seq) { /* @@ -33,6 +34,7 @@ static u32 seq_scale(u32 seq) */ return seq + (ktime_to_ns(ktime_get_real()) >> 6); } +#endif #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) __u32 secure_tcpv6_sequence_number(const __be32 *saddr, const __be32 *daddr, From 5bf1e97dc34bf09643815ed48be3d1761a5985e1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 15 Nov 2011 22:22:49 +0100 Subject: [PATCH 302/364] m68k: Wire up process_vm_{read,write}v Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/unistd.h | 4 +++- arch/m68k/kernel/syscalltable.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 43f984e93970..303192fc9260 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -350,10 +350,12 @@ #define __NR_clock_adjtime 342 #define __NR_syncfs 343 #define __NR_setns 344 +#define __NR_process_vm_readv 345 +#define __NR_process_vm_writev 346 #ifdef __KERNEL__ -#define NR_syscalls 345 +#define NR_syscalls 347 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index c468f2edaa85..ce827b376110 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -365,4 +365,6 @@ ENTRY(sys_call_table) .long sys_clock_adjtime .long sys_syncfs .long sys_setns + .long sys_process_vm_readv /* 345 */ + .long sys_process_vm_writev From 9f9c19ec1a59422c7687b11847ed3408128aa0d6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 28 Nov 2011 08:17:36 +0000 Subject: [PATCH 303/364] xfs: fix the logspace waiting algorithm Apply the scheme used in log_regrant_write_log_space to wake up any other threads waiting for log space before the newly added one to log_regrant_write_log_space as well, and factor the code into readable helpers. For each of the queues we have add two helpers: - one to try to wake up all waiting threads. This helper will also be usable by xfs_log_move_tail once we remove the current opportunistic wakeups in it. - one to sleep on t_wait until enough log space is available, loosely modelled after Linux waitqueues. And use them to reimplement the guts of log_regrant_write_log_space and log_regrant_write_log_space. These two function now use one and the same algorithm for waiting on log space instead of subtly different ones before, with an option to completely unify them in the near future. Also move the filesystem shutdown handling to the common caller given that we had to touch it anyway. Based on hard debugging and an earlier patch from Chandra Seetharaman . Signed-off-by: Christoph Hellwig Reviewed-by: Chandra Seetharaman Tested-by: Chandra Seetharaman Signed-off-by: Ben Myers --- fs/xfs/xfs_log.c | 348 ++++++++++++++++++++++----------------------- fs/xfs/xfs_trace.h | 12 +- 2 files changed, 177 insertions(+), 183 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index a14cd89fe465..34817adf4b9e 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -150,6 +150,117 @@ xlog_grant_add_space( } while (head_val != old); } +STATIC bool +xlog_reserveq_wake( + struct log *log, + int *free_bytes) +{ + struct xlog_ticket *tic; + int need_bytes; + + list_for_each_entry(tic, &log->l_reserveq, t_queue) { + if (tic->t_flags & XLOG_TIC_PERM_RESERV) + need_bytes = tic->t_unit_res * tic->t_cnt; + else + need_bytes = tic->t_unit_res; + + if (*free_bytes < need_bytes) + return false; + *free_bytes -= need_bytes; + + trace_xfs_log_grant_wake_up(log, tic); + wake_up(&tic->t_wait); + } + + return true; +} + +STATIC bool +xlog_writeq_wake( + struct log *log, + int *free_bytes) +{ + struct xlog_ticket *tic; + int need_bytes; + + list_for_each_entry(tic, &log->l_writeq, t_queue) { + ASSERT(tic->t_flags & XLOG_TIC_PERM_RESERV); + + need_bytes = tic->t_unit_res; + + if (*free_bytes < need_bytes) + return false; + *free_bytes -= need_bytes; + + trace_xfs_log_regrant_write_wake_up(log, tic); + wake_up(&tic->t_wait); + } + + return true; +} + +STATIC int +xlog_reserveq_wait( + struct log *log, + struct xlog_ticket *tic, + int need_bytes) +{ + list_add_tail(&tic->t_queue, &log->l_reserveq); + + do { + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + xlog_grant_push_ail(log, need_bytes); + + XFS_STATS_INC(xs_sleep_logspace); + trace_xfs_log_grant_sleep(log, tic); + + xlog_wait(&tic->t_wait, &log->l_grant_reserve_lock); + trace_xfs_log_grant_wake(log, tic); + + spin_lock(&log->l_grant_reserve_lock); + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + } while (xlog_space_left(log, &log->l_grant_reserve_head) < need_bytes); + + list_del_init(&tic->t_queue); + return 0; +shutdown: + list_del_init(&tic->t_queue); + return XFS_ERROR(EIO); +} + +STATIC int +xlog_writeq_wait( + struct log *log, + struct xlog_ticket *tic, + int need_bytes) +{ + list_add_tail(&tic->t_queue, &log->l_writeq); + + do { + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + xlog_grant_push_ail(log, need_bytes); + + XFS_STATS_INC(xs_sleep_logspace); + trace_xfs_log_regrant_write_sleep(log, tic); + + xlog_wait(&tic->t_wait, &log->l_grant_write_lock); + trace_xfs_log_regrant_write_wake(log, tic); + + spin_lock(&log->l_grant_write_lock); + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + } while (xlog_space_left(log, &log->l_grant_write_head) < need_bytes); + + list_del_init(&tic->t_queue); + return 0; +shutdown: + list_del_init(&tic->t_queue); + return XFS_ERROR(EIO); +} + static void xlog_tic_reset_res(xlog_ticket_t *tic) { @@ -350,8 +461,19 @@ xfs_log_reserve( retval = xlog_grant_log_space(log, internal_ticket); } + if (unlikely(retval)) { + /* + * If we are failing, make sure the ticket doesn't have any + * current reservations. We don't want to add this back + * when the ticket/ transaction gets cancelled. + */ + internal_ticket->t_curr_res = 0; + /* ungrant will give back unit_res * t_cnt. */ + internal_ticket->t_cnt = 0; + } + return retval; -} /* xfs_log_reserve */ +} /* @@ -2481,8 +2603,8 @@ restart: /* * Atomically get the log space required for a log ticket. * - * Once a ticket gets put onto the reserveq, it will only return after - * the needed reservation is satisfied. + * Once a ticket gets put onto the reserveq, it will only return after the + * needed reservation is satisfied. * * This function is structured so that it has a lock free fast path. This is * necessary because every new transaction reservation will come through this @@ -2490,113 +2612,53 @@ restart: * every pass. * * As tickets are only ever moved on and off the reserveq under the - * l_grant_reserve_lock, we only need to take that lock if we are going - * to add the ticket to the queue and sleep. We can avoid taking the lock if the - * ticket was never added to the reserveq because the t_queue list head will be - * empty and we hold the only reference to it so it can safely be checked - * unlocked. + * l_grant_reserve_lock, we only need to take that lock if we are going to add + * the ticket to the queue and sleep. We can avoid taking the lock if the ticket + * was never added to the reserveq because the t_queue list head will be empty + * and we hold the only reference to it so it can safely be checked unlocked. */ STATIC int -xlog_grant_log_space(xlog_t *log, - xlog_ticket_t *tic) +xlog_grant_log_space( + struct log *log, + struct xlog_ticket *tic) { - int free_bytes; - int need_bytes; + int free_bytes, need_bytes; + int error = 0; -#ifdef DEBUG - if (log->l_flags & XLOG_ACTIVE_RECOVERY) - panic("grant Recovery problem"); -#endif + ASSERT(!(log->l_flags & XLOG_ACTIVE_RECOVERY)); trace_xfs_log_grant_enter(log, tic); + /* + * If there are other waiters on the queue then give them a chance at + * logspace before us. Wake up the first waiters, if we do not wake + * up all the waiters then go to sleep waiting for more free space, + * otherwise try to get some space for this transaction. + */ need_bytes = tic->t_unit_res; if (tic->t_flags & XFS_LOG_PERM_RESERV) need_bytes *= tic->t_ocnt; - - /* something is already sleeping; insert new transaction at end */ + free_bytes = xlog_space_left(log, &log->l_grant_reserve_head); if (!list_empty_careful(&log->l_reserveq)) { spin_lock(&log->l_grant_reserve_lock); - /* recheck the queue now we are locked */ - if (list_empty(&log->l_reserveq)) { - spin_unlock(&log->l_grant_reserve_lock); - goto redo; - } - list_add_tail(&tic->t_queue, &log->l_reserveq); - - trace_xfs_log_grant_sleep1(log, tic); - - /* - * Gotta check this before going to sleep, while we're - * holding the grant lock. - */ - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return; - - XFS_STATS_INC(xs_sleep_logspace); - xlog_wait(&tic->t_wait, &log->l_grant_reserve_lock); - - /* - * If we got an error, and the filesystem is shutting down, - * we'll catch it down below. So just continue... - */ - trace_xfs_log_grant_wake1(log, tic); - } - -redo: - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return_unlocked; - - free_bytes = xlog_space_left(log, &log->l_grant_reserve_head); - if (free_bytes < need_bytes) { + if (!xlog_reserveq_wake(log, &free_bytes) || + free_bytes < need_bytes) + error = xlog_reserveq_wait(log, tic, need_bytes); + spin_unlock(&log->l_grant_reserve_lock); + } else if (free_bytes < need_bytes) { spin_lock(&log->l_grant_reserve_lock); - if (list_empty(&tic->t_queue)) - list_add_tail(&tic->t_queue, &log->l_reserveq); - - trace_xfs_log_grant_sleep2(log, tic); - - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return; - - xlog_grant_push_ail(log, need_bytes); - - XFS_STATS_INC(xs_sleep_logspace); - xlog_wait(&tic->t_wait, &log->l_grant_reserve_lock); - - trace_xfs_log_grant_wake2(log, tic); - goto redo; - } - - if (!list_empty(&tic->t_queue)) { - spin_lock(&log->l_grant_reserve_lock); - list_del_init(&tic->t_queue); + error = xlog_reserveq_wait(log, tic, need_bytes); spin_unlock(&log->l_grant_reserve_lock); } + if (error) + return error; - /* we've got enough space */ xlog_grant_add_space(log, &log->l_grant_reserve_head, need_bytes); xlog_grant_add_space(log, &log->l_grant_write_head, need_bytes); trace_xfs_log_grant_exit(log, tic); xlog_verify_grant_tail(log); return 0; - -error_return_unlocked: - spin_lock(&log->l_grant_reserve_lock); -error_return: - list_del_init(&tic->t_queue); - spin_unlock(&log->l_grant_reserve_lock); - trace_xfs_log_grant_error(log, tic); - - /* - * If we are failing, make sure the ticket doesn't have any - * current reservations. We don't want to add this back when - * the ticket/transaction gets cancelled. - */ - tic->t_curr_res = 0; - tic->t_cnt = 0; /* ungrant will give back unit_res * t_cnt. */ - return XFS_ERROR(EIO); -} /* xlog_grant_log_space */ - +} /* * Replenish the byte reservation required by moving the grant write head. @@ -2605,10 +2667,12 @@ error_return: * free fast path. */ STATIC int -xlog_regrant_write_log_space(xlog_t *log, - xlog_ticket_t *tic) +xlog_regrant_write_log_space( + struct log *log, + struct xlog_ticket *tic) { - int free_bytes, need_bytes; + int free_bytes, need_bytes; + int error = 0; tic->t_curr_res = tic->t_unit_res; xlog_tic_reset_res(tic); @@ -2616,104 +2680,38 @@ xlog_regrant_write_log_space(xlog_t *log, if (tic->t_cnt > 0) return 0; -#ifdef DEBUG - if (log->l_flags & XLOG_ACTIVE_RECOVERY) - panic("regrant Recovery problem"); -#endif + ASSERT(!(log->l_flags & XLOG_ACTIVE_RECOVERY)); trace_xfs_log_regrant_write_enter(log, tic); - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return_unlocked; - /* If there are other waiters on the queue then give them a - * chance at logspace before us. Wake up the first waiters, - * if we do not wake up all the waiters then go to sleep waiting - * for more free space, otherwise try to get some space for - * this transaction. + /* + * If there are other waiters on the queue then give them a chance at + * logspace before us. Wake up the first waiters, if we do not wake + * up all the waiters then go to sleep waiting for more free space, + * otherwise try to get some space for this transaction. */ need_bytes = tic->t_unit_res; - if (!list_empty_careful(&log->l_writeq)) { - struct xlog_ticket *ntic; - - spin_lock(&log->l_grant_write_lock); - free_bytes = xlog_space_left(log, &log->l_grant_write_head); - list_for_each_entry(ntic, &log->l_writeq, t_queue) { - ASSERT(ntic->t_flags & XLOG_TIC_PERM_RESERV); - - if (free_bytes < ntic->t_unit_res) - break; - free_bytes -= ntic->t_unit_res; - wake_up(&ntic->t_wait); - } - - if (ntic != list_first_entry(&log->l_writeq, - struct xlog_ticket, t_queue)) { - if (list_empty(&tic->t_queue)) - list_add_tail(&tic->t_queue, &log->l_writeq); - trace_xfs_log_regrant_write_sleep1(log, tic); - - xlog_grant_push_ail(log, need_bytes); - - XFS_STATS_INC(xs_sleep_logspace); - xlog_wait(&tic->t_wait, &log->l_grant_write_lock); - trace_xfs_log_regrant_write_wake1(log, tic); - } else - spin_unlock(&log->l_grant_write_lock); - } - -redo: - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return_unlocked; - free_bytes = xlog_space_left(log, &log->l_grant_write_head); - if (free_bytes < need_bytes) { + if (!list_empty_careful(&log->l_writeq)) { spin_lock(&log->l_grant_write_lock); - if (list_empty(&tic->t_queue)) - list_add_tail(&tic->t_queue, &log->l_writeq); - - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return; - - xlog_grant_push_ail(log, need_bytes); - - XFS_STATS_INC(xs_sleep_logspace); - trace_xfs_log_regrant_write_sleep2(log, tic); - xlog_wait(&tic->t_wait, &log->l_grant_write_lock); - - trace_xfs_log_regrant_write_wake2(log, tic); - goto redo; - } - - if (!list_empty(&tic->t_queue)) { + if (!xlog_writeq_wake(log, &free_bytes) || + free_bytes < need_bytes) + error = xlog_writeq_wait(log, tic, need_bytes); + spin_unlock(&log->l_grant_write_lock); + } else if (free_bytes < need_bytes) { spin_lock(&log->l_grant_write_lock); - list_del_init(&tic->t_queue); + error = xlog_writeq_wait(log, tic, need_bytes); spin_unlock(&log->l_grant_write_lock); } - /* we've got enough space */ + if (error) + return error; + xlog_grant_add_space(log, &log->l_grant_write_head, need_bytes); trace_xfs_log_regrant_write_exit(log, tic); xlog_verify_grant_tail(log); return 0; - - - error_return_unlocked: - spin_lock(&log->l_grant_write_lock); - error_return: - list_del_init(&tic->t_queue); - spin_unlock(&log->l_grant_write_lock); - trace_xfs_log_regrant_write_error(log, tic); - - /* - * If we are failing, make sure the ticket doesn't have any - * current reservations. We don't want to add this back when - * the ticket/transaction gets cancelled. - */ - tic->t_curr_res = 0; - tic->t_cnt = 0; /* ungrant will give back unit_res * t_cnt. */ - return XFS_ERROR(EIO); -} /* xlog_regrant_write_log_space */ - +} /* The first cnt-1 times through here we don't need to * move the grant write head because the permanent diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h index f1d2802b2f07..494035798873 100644 --- a/fs/xfs/xfs_trace.h +++ b/fs/xfs/xfs_trace.h @@ -834,18 +834,14 @@ DEFINE_LOGGRANT_EVENT(xfs_log_umount_write); DEFINE_LOGGRANT_EVENT(xfs_log_grant_enter); DEFINE_LOGGRANT_EVENT(xfs_log_grant_exit); DEFINE_LOGGRANT_EVENT(xfs_log_grant_error); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_sleep1); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake1); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_sleep2); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake2); +DEFINE_LOGGRANT_EVENT(xfs_log_grant_sleep); +DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake); DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake_up); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_enter); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_exit); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_error); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_sleep1); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake1); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_sleep2); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake2); +DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_sleep); +DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake_up); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_reserve_enter); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_reserve_exit); From 02125a826459a6ad142f8d91c5b6357562f96615 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 5 Dec 2011 08:43:34 -0500 Subject: [PATCH 304/364] fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API __d_path() API is asking for trouble and in case of apparmor d_namespace_path() getting just that. The root cause is that when __d_path() misses the root it had been told to look for, it stores the location of the most remote ancestor in *root. Without grabbing references. Sure, at the moment of call it had been pinned down by what we have in *path. And if we raced with umount -l, we could have very well stopped at vfsmount/dentry that got freed as soon as prepend_path() dropped vfsmount_lock. It is safe to compare these pointers with pre-existing (and known to be still alive) vfsmount and dentry, as long as all we are asking is "is it the same address?". Dereferencing is not safe and apparmor ended up stepping into that. d_namespace_path() really wants to examine the place where we stopped, even if it's not connected to our namespace. As the result, it looked at ->d_sb->s_magic of a dentry that might've been already freed by that point. All other callers had been careful enough to avoid that, but it's really a bad interface - it invites that kind of trouble. The fix is fairly straightforward, even though it's bigger than I'd like: * prepend_path() root argument becomes const. * __d_path() is never called with NULL/NULL root. It was a kludge to start with. Instead, we have an explicit function - d_absolute_root(). Same as __d_path(), except that it doesn't get root passed and stops where it stops. apparmor and tomoyo are using it. * __d_path() returns NULL on path outside of root. The main caller is show_mountinfo() and that's precisely what we pass root for - to skip those outside chroot jail. Those who don't want that can (and do) use d_path(). * __d_path() root argument becomes const. Everyone agrees, I hope. * apparmor does *NOT* try to use __d_path() or any of its variants when it sees that path->mnt is an internal vfsmount. In that case it's definitely not mounted anywhere and dentry_path() is exactly what we want there. Handling of sysctl()-triggered weirdness is moved to that place. * if apparmor is asked to do pathname relative to chroot jail and __d_path() tells it we it's not in that jail, the sucker just calls d_absolute_path() instead. That's the other remaining caller of __d_path(), BTW. * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway - the normal seq_file logics will take care of growing the buffer and redoing the call of ->show() just fine). However, if it gets path not reachable from root, it returns SEQ_SKIP. The only caller adjusted (i.e. stopped ignoring the return value as it used to do). Reviewed-by: John Johansen ACKed-by: John Johansen Signed-off-by: Al Viro Cc: stable@vger.kernel.org --- fs/dcache.c | 71 +++++++++++++++++++++++--------------- fs/namespace.c | 20 ++++++----- fs/seq_file.c | 6 ++-- include/linux/dcache.h | 3 +- include/linux/fs.h | 1 + security/apparmor/path.c | 69 ++++++++++++++++++++---------------- security/tomoyo/realpath.c | 3 +- 7 files changed, 102 insertions(+), 71 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 10ba92def3f6..89509b5a090e 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -2439,16 +2439,14 @@ static int prepend_name(char **buffer, int *buflen, struct qstr *name) /** * prepend_path - Prepend path string to a buffer * @path: the dentry/vfsmount to report - * @root: root vfsmnt/dentry (may be modified by this function) + * @root: root vfsmnt/dentry * @buffer: pointer to the end of the buffer * @buflen: pointer to buffer length * * Caller holds the rename_lock. - * - * If path is not reachable from the supplied root, then the value of - * root is changed (without modifying refcounts). */ -static int prepend_path(const struct path *path, struct path *root, +static int prepend_path(const struct path *path, + const struct path *root, char **buffer, int *buflen) { struct dentry *dentry = path->dentry; @@ -2483,10 +2481,10 @@ static int prepend_path(const struct path *path, struct path *root, dentry = parent; } -out: if (!error && !slash) error = prepend(buffer, buflen, "/", 1); +out: br_read_unlock(vfsmount_lock); return error; @@ -2500,15 +2498,17 @@ global_root: WARN(1, "Root dentry has weird name <%.*s>\n", (int) dentry->d_name.len, dentry->d_name.name); } - root->mnt = vfsmnt; - root->dentry = dentry; + if (!slash) + error = prepend(buffer, buflen, "/", 1); + if (!error) + error = vfsmnt->mnt_ns ? 1 : 2; goto out; } /** * __d_path - return the path of a dentry * @path: the dentry/vfsmount to report - * @root: root vfsmnt/dentry (may be modified by this function) + * @root: root vfsmnt/dentry * @buf: buffer to return value in * @buflen: buffer length * @@ -2519,10 +2519,10 @@ global_root: * * "buflen" should be positive. * - * If path is not reachable from the supplied root, then the value of - * root is changed (without modifying refcounts). + * If the path is not reachable from the supplied root, return %NULL. */ -char *__d_path(const struct path *path, struct path *root, +char *__d_path(const struct path *path, + const struct path *root, char *buf, int buflen) { char *res = buf + buflen; @@ -2533,7 +2533,28 @@ char *__d_path(const struct path *path, struct path *root, error = prepend_path(path, root, &res, &buflen); write_sequnlock(&rename_lock); - if (error) + if (error < 0) + return ERR_PTR(error); + if (error > 0) + return NULL; + return res; +} + +char *d_absolute_path(const struct path *path, + char *buf, int buflen) +{ + struct path root = {}; + char *res = buf + buflen; + int error; + + prepend(&res, &buflen, "\0", 1); + write_seqlock(&rename_lock); + error = prepend_path(path, &root, &res, &buflen); + write_sequnlock(&rename_lock); + + if (error > 1) + error = -EINVAL; + if (error < 0) return ERR_PTR(error); return res; } @@ -2541,8 +2562,9 @@ char *__d_path(const struct path *path, struct path *root, /* * same as __d_path but appends "(deleted)" for unlinked files. */ -static int path_with_deleted(const struct path *path, struct path *root, - char **buf, int *buflen) +static int path_with_deleted(const struct path *path, + const struct path *root, + char **buf, int *buflen) { prepend(buf, buflen, "\0", 1); if (d_unlinked(path->dentry)) { @@ -2579,7 +2601,6 @@ char *d_path(const struct path *path, char *buf, int buflen) { char *res = buf + buflen; struct path root; - struct path tmp; int error; /* @@ -2594,9 +2615,8 @@ char *d_path(const struct path *path, char *buf, int buflen) get_fs_root(current->fs, &root); write_seqlock(&rename_lock); - tmp = root; - error = path_with_deleted(path, &tmp, &res, &buflen); - if (error) + error = path_with_deleted(path, &root, &res, &buflen); + if (error < 0) res = ERR_PTR(error); write_sequnlock(&rename_lock); path_put(&root); @@ -2617,7 +2637,6 @@ char *d_path_with_unreachable(const struct path *path, char *buf, int buflen) { char *res = buf + buflen; struct path root; - struct path tmp; int error; if (path->dentry->d_op && path->dentry->d_op->d_dname) @@ -2625,9 +2644,8 @@ char *d_path_with_unreachable(const struct path *path, char *buf, int buflen) get_fs_root(current->fs, &root); write_seqlock(&rename_lock); - tmp = root; - error = path_with_deleted(path, &tmp, &res, &buflen); - if (!error && !path_equal(&tmp, &root)) + error = path_with_deleted(path, &root, &res, &buflen); + if (error > 0) error = prepend_unreachable(&res, &buflen); write_sequnlock(&rename_lock); path_put(&root); @@ -2758,19 +2776,18 @@ SYSCALL_DEFINE2(getcwd, char __user *, buf, unsigned long, size) write_seqlock(&rename_lock); if (!d_unlinked(pwd.dentry)) { unsigned long len; - struct path tmp = root; char *cwd = page + PAGE_SIZE; int buflen = PAGE_SIZE; prepend(&cwd, &buflen, "\0", 1); - error = prepend_path(&pwd, &tmp, &cwd, &buflen); + error = prepend_path(&pwd, &root, &cwd, &buflen); write_sequnlock(&rename_lock); - if (error) + if (error < 0) goto out; /* Unreachable from current root */ - if (!path_equal(&tmp, &root)) { + if (error > 0) { error = prepend_unreachable(&cwd, &buflen); if (error) goto out; diff --git a/fs/namespace.c b/fs/namespace.c index 6d3a1963879b..cfc6d4448aa5 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1048,15 +1048,12 @@ static int show_mountinfo(struct seq_file *m, void *v) if (err) goto out; seq_putc(m, ' '); - seq_path_root(m, &mnt_path, &root, " \t\n\\"); - if (root.mnt != p->root.mnt || root.dentry != p->root.dentry) { - /* - * Mountpoint is outside root, discard that one. Ugly, - * but less so than trying to do that in iterator in a - * race-free way (due to renames). - */ - return SEQ_SKIP; - } + + /* mountpoints outside of chroot jail will give SEQ_SKIP on this */ + err = seq_path_root(m, &mnt_path, &root, " \t\n\\"); + if (err) + goto out; + seq_puts(m, mnt->mnt_flags & MNT_READONLY ? " ro" : " rw"); show_mnt_opts(m, mnt); @@ -2776,3 +2773,8 @@ void kern_unmount(struct vfsmount *mnt) } } EXPORT_SYMBOL(kern_unmount); + +bool our_mnt(struct vfsmount *mnt) +{ + return check_mnt(mnt); +} diff --git a/fs/seq_file.c b/fs/seq_file.c index 05d6b0e78c95..dba43c3ea3af 100644 --- a/fs/seq_file.c +++ b/fs/seq_file.c @@ -449,8 +449,6 @@ EXPORT_SYMBOL(seq_path); /* * Same as seq_path, but relative to supplied root. - * - * root may be changed, see __d_path(). */ int seq_path_root(struct seq_file *m, struct path *path, struct path *root, char *esc) @@ -463,6 +461,8 @@ int seq_path_root(struct seq_file *m, struct path *path, struct path *root, char *p; p = __d_path(path, root, buf, size); + if (!p) + return SEQ_SKIP; res = PTR_ERR(p); if (!IS_ERR(p)) { char *end = mangle_path(buf, p, esc); @@ -474,7 +474,7 @@ int seq_path_root(struct seq_file *m, struct path *path, struct path *root, } seq_commit(m, res); - return res < 0 ? res : 0; + return res < 0 && res != -ENAMETOOLONG ? res : 0; } /* diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 4df926199369..ed9f74f6c519 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -339,7 +339,8 @@ extern int d_validate(struct dentry *, struct dentry *); */ extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...); -extern char *__d_path(const struct path *path, struct path *root, char *, int); +extern char *__d_path(const struct path *, const struct path *, char *, int); +extern char *d_absolute_path(const struct path *, char *, int); extern char *d_path(const struct path *, char *, int); extern char *d_path_with_unreachable(const struct path *, char *, int); extern char *dentry_path_raw(struct dentry *, char *, int); diff --git a/include/linux/fs.h b/include/linux/fs.h index e3130220ce3e..019dc558df1a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1942,6 +1942,7 @@ extern int fd_statfs(int, struct kstatfs *); extern int statfs_by_dentry(struct dentry *, struct kstatfs *); extern int freeze_super(struct super_block *super); extern int thaw_super(struct super_block *super); +extern bool our_mnt(struct vfsmount *mnt); extern int current_umask(void); diff --git a/security/apparmor/path.c b/security/apparmor/path.c index 36cc0cc39e78..b566eba4a65c 100644 --- a/security/apparmor/path.c +++ b/security/apparmor/path.c @@ -57,23 +57,44 @@ static int prepend(char **buffer, int buflen, const char *str, int namelen) static int d_namespace_path(struct path *path, char *buf, int buflen, char **name, int flags) { - struct path root, tmp; char *res; - int connected, error = 0; + int error = 0; + int connected = 1; - /* Get the root we want to resolve too, released below */ - if (flags & PATH_CHROOT_REL) { - /* resolve paths relative to chroot */ - get_fs_root(current->fs, &root); - } else { - /* resolve paths relative to namespace */ - root.mnt = current->nsproxy->mnt_ns->root; - root.dentry = root.mnt->mnt_root; - path_get(&root); + if (path->mnt->mnt_flags & MNT_INTERNAL) { + /* it's not mounted anywhere */ + res = dentry_path(path->dentry, buf, buflen); + *name = res; + if (IS_ERR(res)) { + *name = buf; + return PTR_ERR(res); + } + if (path->dentry->d_sb->s_magic == PROC_SUPER_MAGIC && + strncmp(*name, "/sys/", 5) == 0) { + /* TODO: convert over to using a per namespace + * control instead of hard coded /proc + */ + return prepend(name, *name - buf, "/proc", 5); + } + return 0; } - tmp = root; - res = __d_path(path, &tmp, buf, buflen); + /* resolve paths relative to chroot?*/ + if (flags & PATH_CHROOT_REL) { + struct path root; + get_fs_root(current->fs, &root); + res = __d_path(path, &root, buf, buflen); + if (res && !IS_ERR(res)) { + /* everything's fine */ + *name = res; + path_put(&root); + goto ok; + } + path_put(&root); + connected = 0; + } + + res = d_absolute_path(path, buf, buflen); *name = res; /* handle error conditions - and still allow a partial path to @@ -84,7 +105,10 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, *name = buf; goto out; } + if (!our_mnt(path->mnt)) + connected = 0; +ok: /* Handle two cases: * 1. A deleted dentry && profile is not allowing mediation of deleted * 2. On some filesystems, newly allocated dentries appear to the @@ -97,10 +121,7 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, goto out; } - /* Determine if the path is connected to the expected root */ - connected = tmp.dentry == root.dentry && tmp.mnt == root.mnt; - - /* If the path is not connected, + /* If the path is not connected to the expected root, * check if it is a sysctl and handle specially else remove any * leading / that __d_path may have returned. * Unless @@ -112,17 +133,9 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, * namespace root. */ if (!connected) { - /* is the disconnect path a sysctl? */ - if (tmp.dentry->d_sb->s_magic == PROC_SUPER_MAGIC && - strncmp(*name, "/sys/", 5) == 0) { - /* TODO: convert over to using a per namespace - * control instead of hard coded /proc - */ - error = prepend(name, *name - buf, "/proc", 5); - } else if (!(flags & PATH_CONNECT_PATH) && + if (!(flags & PATH_CONNECT_PATH) && !(((flags & CHROOT_NSCONNECT) == CHROOT_NSCONNECT) && - (tmp.mnt == current->nsproxy->mnt_ns->root && - tmp.dentry == tmp.mnt->mnt_root))) { + our_mnt(path->mnt))) { /* disconnected path, don't return pathname starting * with '/' */ @@ -133,8 +146,6 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, } out: - path_put(&root); - return error; } diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c index 738bbdf8d4c7..36fa7c9bedc4 100644 --- a/security/tomoyo/realpath.c +++ b/security/tomoyo/realpath.c @@ -101,9 +101,8 @@ static char *tomoyo_get_absolute_path(struct path *path, char * const buffer, { char *pos = ERR_PTR(-ENOMEM); if (buflen >= 256) { - struct path ns_root = { }; /* go to whatever namespace root we are under */ - pos = __d_path(path, &ns_root, buffer, buflen - 1); + pos = d_absolute_path(path, buffer, buflen - 1); if (!IS_ERR(pos) && *pos == '/' && pos[1]) { struct inode *inode = path->dentry->d_inode; if (inode && S_ISDIR(inode->i_mode)) { From dc87cd5c264cb587f16459285565830689ecf7a7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 2 Dec 2011 18:15:27 -0500 Subject: [PATCH 305/364] drm/radeon/kms: fix return type for radeon_encoder_get_dp_bridge_encoder_id Seems like something got mis-merged here. Noticed by kallisti5 on IRC. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 06e413e6a920..4b27efa4405b 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -233,13 +233,12 @@ u16 radeon_encoder_get_dp_bridge_encoder_id(struct drm_encoder *encoder) switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_TRAVIS: case ENCODER_OBJECT_ID_NUTMEG: - return true; + return radeon_encoder->encoder_id; default: - return false; + return ENCODER_OBJECT_ID_NONE; } } - - return false; + return ENCODER_OBJECT_ID_NONE; } void radeon_panel_mode_fixup(struct drm_encoder *encoder, From eb1711bb94991e93669c5a1b5f84f11be2d51ea1 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 6 Dec 2011 12:12:33 +0100 Subject: [PATCH 306/364] drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a The recursion loop goes retire_requests->unbind->gpu_idle->retire_reqeusts. Every time we go through this we need a - active object that can be retired - and there are no other references to that object than the one from the active list, so that it gets unbound and freed immediately. Otherwise the recursion stops. So the recursion is only limited by the number of objects that fit these requirements sitting in the active list any time retire_request is called. Issue exercised by tests/gem_unref_active_buffers from i-g-t. There's been a decent bikeshed discussion whether it wouldn't be better to pass around a flag, but imo this is o.k. for such a limited case that only supports a w/a. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42180 Signed-Off-by: Daniel Vetter Reviewed-by: Chris Wilson [ickle- we built better bikesheds, but this keeps the rain off for now] Tested-by: Dave Airlie Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 8359dc777041..60ff1b63b568 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2026,8 +2026,13 @@ i915_wait_request(struct intel_ring_buffer *ring, * to handle this, the waiter on a request often wants an associated * buffer to have made it to the inactive list, and we would need * a separate wait queue to handle that. + * + * To avoid a recursion with the ilk VT-d workaround (that calls + * gpu_idle when unbinding objects with interruptible==false) don't + * retire requests in that case (because it might call unbind if the + * active list holds the last reference to the object). */ - if (ret == 0) + if (ret == 0 && dev_priv->mm.interruptible) i915_gem_retire_requests_ring(ring); return ret; From 24bb5a0ce39c51a2e2602c947f218a19e4b26d7d Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Tue, 29 Nov 2011 22:08:00 +0100 Subject: [PATCH 307/364] vmwgfx: Use kcalloc instead of kzalloc to allocate array The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107 Signed-off-by: Thomas Meyer Reviewed-by: Jakob Bornecrantz Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index 3f6343502d1f..5ff561d4e0b4 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -140,7 +140,7 @@ int vmw_present_ioctl(struct drm_device *dev, void *data, goto out_clips; } - clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL); + clips = kcalloc(num_clips, sizeof(*clips), GFP_KERNEL); if (clips == NULL) { DRM_ERROR("Failed to allocate clip rect list.\n"); ret = -ENOMEM; @@ -232,7 +232,7 @@ int vmw_present_readback_ioctl(struct drm_device *dev, void *data, goto out_clips; } - clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL); + clips = kcalloc(num_clips, sizeof(*clips), GFP_KERNEL); if (clips == NULL) { DRM_ERROR("Failed to allocate clip rect list.\n"); ret = -ENOMEM; From 86b47c25494b824da655b95f6fdb4fdb3f17aa77 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Tue, 22 Nov 2011 16:08:21 +0200 Subject: [PATCH 308/364] perf: Do no try to schedule task events if there are none perf_event_sched_in() shouldn't try to schedule task events if there are none otherwise task's ctx->is_active will be set and will not be cleared during sched_out. This will prevent newly added events from being scheduled into the task context. Fixes a boo-boo in commit 1d5f003f5a9 ("perf: Do not set task_ctx pointer in cpuctx if there are no events in the context"). Signed-off-by: Gleb Natapov Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111122140821.GF2557@redhat.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 600c1629b64d..d3b9df5962c2 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -2174,11 +2174,11 @@ static void perf_event_context_sched_in(struct perf_event_context *ctx, */ cpu_ctx_sched_out(cpuctx, EVENT_FLEXIBLE); - perf_event_sched_in(cpuctx, ctx, task); - if (ctx->nr_events) cpuctx->task_ctx = ctx; + perf_event_sched_in(cpuctx, cpuctx->task_ctx, task); + perf_pmu_enable(ctx->pmu); perf_ctx_unlock(cpuctx, ctx); From 766ddee68bf1e4cc2cdcf73b34d243cf6e6f8ab0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 7 Dec 2011 16:55:19 +0100 Subject: [PATCH 309/364] ALSA: hda/realtek - Don't create extra controls with channel suffix The multiple headphone or speaker pins are usually provided to output the same stream unlike line-out jacks (which are supposed to be multi-channel surrounds). Thus giving a mixer name like "Headphone Surround" is rather confusing. Instead, when multiple headphone volumes are available, use index with the same "Headphone" name. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a7d1bc4e0d09..96f5da9db5cf 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3173,7 +3173,8 @@ static int alc_auto_create_multi_out_ctls(struct hda_codec *codec, } static int alc_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin, - hda_nid_t dac, const char *pfx) + hda_nid_t dac, const char *pfx, + int cidx) { struct alc_spec *spec = codec->spec; hda_nid_t sw, vol; @@ -3189,15 +3190,15 @@ static int alc_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin, if (is_ctl_used(spec->sw_ctls, val)) return 0; /* already created */ mark_ctl_usage(spec->sw_ctls, val); - return add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, val); + return __add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, cidx, val); } sw = alc_look_for_out_mute_nid(codec, pin, dac); vol = alc_look_for_out_vol_nid(codec, pin, dac); - err = alc_auto_add_stereo_vol(codec, pfx, 0, vol); + err = alc_auto_add_stereo_vol(codec, pfx, cidx, vol); if (err < 0) return err; - err = alc_auto_add_stereo_sw(codec, pfx, 0, sw); + err = alc_auto_add_stereo_sw(codec, pfx, cidx, sw); if (err < 0) return err; return 0; @@ -3238,16 +3239,21 @@ static int alc_auto_create_extra_outs(struct hda_codec *codec, int num_pins, hda_nid_t dac = *dacs; if (!dac) dac = spec->multiout.dac_nids[0]; - return alc_auto_create_extra_out(codec, *pins, dac, pfx); + return alc_auto_create_extra_out(codec, *pins, dac, pfx, 0); } if (dacs[num_pins - 1]) { /* OK, we have a multi-output system with individual volumes */ for (i = 0; i < num_pins; i++) { - snprintf(name, sizeof(name), "%s %s", - pfx, channel_name[i]); - err = alc_auto_create_extra_out(codec, pins[i], dacs[i], - name); + if (num_pins >= 3) { + snprintf(name, sizeof(name), "%s %s", + pfx, channel_name[i]); + err = alc_auto_create_extra_out(codec, pins[i], dacs[i], + name, 0); + } else { + err = alc_auto_create_extra_out(codec, pins[i], dacs[i], + pfx, i); + } if (err < 0) return err; } From fbabc24619f7298626265a3f973786b471b8c29d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 7 Dec 2011 17:14:20 +0100 Subject: [PATCH 310/364] ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins On systems with two speaker pins, the secondary speaker pin is mostly assigned to a bass speaker instead of a surround. Thus it makes more sense to rename the control properly. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 96f5da9db5cf..214d4f91d6af 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2631,6 +2631,8 @@ static const char *alc_get_line_out_pfx(struct alc_spec *spec, int ch, case AUTO_PIN_SPEAKER_OUT: if (cfg->line_outs == 1) return "Speaker"; + if (cfg->line_outs == 2) + return ch ? "Bass Speaker" : "Speaker"; break; case AUTO_PIN_HP_OUT: /* for multi-io case, only the primary out */ From 0a34b42b6245ccc710be6759cded5b7fe41ea1f9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 7 Dec 2011 17:20:30 +0100 Subject: [PATCH 311/364] ALSA: hda/realtek - Fix lost speaker volume controls When there are the same or more number of HP pins are available, HP pins are used as the primary outputs instead of the speaker pins. But, in some cases (especially with ALC663 & co), some DACs are available only with a later pin and it's assigned to a speaker, and since the driver parses the pins from the lower NID, such a DAC was skipped eventually without assignments. This resulted in a regression, the missing speaker volume control in the new parser. As a workaround for this, now the driver retries the pin->DAC mapping again after restoring the speaker-pins as primary. This is still an ad hoc fix, but it works so far for most of Realtek codecs. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 37 ++++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 7 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 214d4f91d6af..1d07e8fa2433 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2906,7 +2906,7 @@ static hda_nid_t alc_auto_look_for_dac(struct hda_codec *codec, hda_nid_t pin) if (!nid) continue; if (found_in_nid_list(nid, spec->multiout.dac_nids, - spec->multiout.num_dacs)) + ARRAY_SIZE(spec->private_dac_nids))) continue; if (found_in_nid_list(nid, spec->multiout.hp_out_nid, ARRAY_SIZE(spec->multiout.hp_out_nid))) @@ -2927,6 +2927,7 @@ static hda_nid_t get_dac_if_single(struct hda_codec *codec, hda_nid_t pin) return 0; } +/* return 0 if no possible DAC is found, 1 if one or more found */ static int alc_auto_fill_extra_dacs(struct hda_codec *codec, int num_outs, const hda_nid_t *pins, hda_nid_t *dacs) { @@ -2944,7 +2945,7 @@ static int alc_auto_fill_extra_dacs(struct hda_codec *codec, int num_outs, if (!dacs[i]) dacs[i] = alc_auto_look_for_dac(codec, pins[i]); } - return 0; + return 1; } static int alc_auto_fill_multi_ios(struct hda_codec *codec, @@ -2954,7 +2955,7 @@ static int alc_auto_fill_multi_ios(struct hda_codec *codec, static int alc_auto_fill_dac_nids(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - const struct auto_pin_cfg *cfg = &spec->autocfg; + struct auto_pin_cfg *cfg = &spec->autocfg; bool redone = false; int i; @@ -2965,6 +2966,7 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) spec->multiout.extra_out_nid[0] = 0; memset(spec->private_dac_nids, 0, sizeof(spec->private_dac_nids)); spec->multiout.dac_nids = spec->private_dac_nids; + spec->multi_ios = 0; /* fill hard-wired DACs first */ if (!redone) { @@ -2998,10 +3000,12 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) for (i = 0; i < cfg->line_outs; i++) { if (spec->private_dac_nids[i]) spec->multiout.num_dacs++; - else + else { memmove(spec->private_dac_nids + i, spec->private_dac_nids + i + 1, sizeof(hda_nid_t) * (cfg->line_outs - i - 1)); + spec->private_dac_nids[cfg->line_outs - 1] = 0; + } } if (cfg->line_outs == 1 && cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) { @@ -3023,9 +3027,28 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) if (cfg->line_out_type != AUTO_PIN_HP_OUT) alc_auto_fill_extra_dacs(codec, cfg->hp_outs, cfg->hp_pins, spec->multiout.hp_out_nid); - if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) - alc_auto_fill_extra_dacs(codec, cfg->speaker_outs, cfg->speaker_pins, - spec->multiout.extra_out_nid); + if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) { + int err = alc_auto_fill_extra_dacs(codec, cfg->speaker_outs, + cfg->speaker_pins, + spec->multiout.extra_out_nid); + /* if no speaker volume is assigned, try again as the primary + * output + */ + if (!err && cfg->speaker_outs > 0 && + cfg->line_out_type == AUTO_PIN_HP_OUT) { + cfg->hp_outs = cfg->line_outs; + memcpy(cfg->hp_pins, cfg->line_out_pins, + sizeof(cfg->hp_pins)); + cfg->line_outs = cfg->speaker_outs; + memcpy(cfg->line_out_pins, cfg->speaker_pins, + sizeof(cfg->speaker_pins)); + cfg->speaker_outs = 0; + memset(cfg->speaker_pins, 0, sizeof(cfg->speaker_pins)); + cfg->line_out_type = AUTO_PIN_SPEAKER_OUT; + redone = false; + goto again; + } + } return 0; } From 77a7300abad7fe01891b400e88d746f97307ee5a Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 7 Dec 2011 03:16:26 +0400 Subject: [PATCH 312/364] of/irq: Get rid of NO_IRQ usage PPC32/64 defines NO_IRQ to zero, so no problems expected. ARM defines NO_IRQ to -1, but OF code relies on IRQ domains support, which returns correct ('0') value in 'no irq' case. So everything should be fine. Other arches might break if some of their OF drivers rely on NO_IRQ being not 0. If so, the drivers must be fixed, finally. [ Rob Herring points out that microblaze should be fixed, and has posted a patch for testing for that. - Linus ] Signed-off-by: Anton Vorontsov Acked-by: Wolfram Sang Signed-off-by: Linus Torvalds --- drivers/of/irq.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 19c0115092dd..0f0cfa3bca30 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -26,11 +26,6 @@ #include #include -/* For archs that don't support NO_IRQ (such as x86), provide a dummy value */ -#ifndef NO_IRQ -#define NO_IRQ 0 -#endif - /** * irq_of_parse_and_map - Parse and map an interrupt into linux virq space * @device: Device node of the device whose interrupt is to be mapped @@ -44,7 +39,7 @@ unsigned int irq_of_parse_and_map(struct device_node *dev, int index) struct of_irq oirq; if (of_irq_map_one(dev, index, &oirq)) - return NO_IRQ; + return 0; return irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); @@ -345,7 +340,7 @@ int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) /* Only dereference the resource if both the * resource and the irq are valid. */ - if (r && irq != NO_IRQ) { + if (r && irq) { r->start = r->end = irq; r->flags = IORESOURCE_IRQ; r->name = dev->full_name; @@ -363,7 +358,7 @@ int of_irq_count(struct device_node *dev) { int nr = 0; - while (of_irq_to_resource(dev, nr, NULL) != NO_IRQ) + while (of_irq_to_resource(dev, nr, NULL)) nr++; return nr; @@ -383,7 +378,7 @@ int of_irq_to_resource_table(struct device_node *dev, struct resource *res, int i; for (i = 0; i < nr_irqs; i++, res++) - if (of_irq_to_resource(dev, i, res) == NO_IRQ) + if (!of_irq_to_resource(dev, i, res)) break; return i; From 807cc4b1201e82769f7435211310f5691dcb704d Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 16 Nov 2011 20:01:43 +0100 Subject: [PATCH 313/364] spi/ath79: fix compile error due to missing include Whithout including 'linux/module.h' spi-ath79 driver fails to compile with the these errors: drivers/spi/spi-ath79.c:273:12: error: 'THIS_MODULE' undeclared here (not in a function) drivers/spi/spi-ath79.c:278:20: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:278:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:278:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/spi/spi-ath79.c:278:20: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:279:15: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:279:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:279:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/spi/spi-ath79.c:279:15: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:280:16: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:280:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:280:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/spi/spi-ath79.c:280:16: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:281:14: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:281:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:281:1: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/spi/spi-ath79.c:281:14: warning: function declaration isn't a prototype Signed-off-by: Gabor Juhos Signed-off-by: Wolfram Sang --- drivers/spi/spi-ath79.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index 024b48aed5ca..acc88b4d2869 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -13,6 +13,7 @@ */ #include +#include #include #include #include From 00d2952caa6b0b2cd113494ae39f08c4663f371b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 24 Nov 2011 11:10:51 +0800 Subject: [PATCH 314/364] spi/nuc900: Include linux/module.h Include linux/module.h to fix below build error: CC drivers/spi/spi-nuc900.o drivers/spi/spi-nuc900.c:484: error: 'THIS_MODULE' undeclared here (not in a function) drivers/spi/spi-nuc900.c:489: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:489: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:489: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/spi/spi-nuc900.c:489: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:490: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:490: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:490: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/spi/spi-nuc900.c:490: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:491: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:491: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:491: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/spi/spi-nuc900.c:491: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:492: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:492: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:492: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/spi/spi-nuc900.c:492: warning: function declaration isn't a prototype make[2]: *** [drivers/spi/spi-nuc900.o] Error 1 make[1]: *** [drivers/spi] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Acked-by: Paul Gortmaker Signed-off-by: Wolfram Sang --- drivers/spi/spi-nuc900.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c index 21c70b2b8311..182e9c873822 100644 --- a/drivers/spi/spi-nuc900.c +++ b/drivers/spi/spi-nuc900.c @@ -8,6 +8,7 @@ * */ +#include #include #include #include From d9ddcec35d713dd33dc20dcb4db84db35f9956a6 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 7 Dec 2011 21:18:16 +0100 Subject: [PATCH 315/364] spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build When spi_fsl_espi is chosen to be built as a module, there is a build error because we test only CONFIG_SPI_FSL_ESPI in declaration of struct mpc8xxx_spi in drivers/spi/spi_fsl_lib.h. Also some called functions are not exported. So we forbid CONFIG_SPI_FSL_ESPI to be tristate here. The error looks like: drivers/spi/spi_fsl_espi.c: In function 'fsl_espi_bufs': drivers/spi/spi_fsl_espi.c:232: error: 'struct mpc8xxx_spi' has no member named 'len' ... Signed-off-by: Jiri Slaby Acked-by: Kumar Gala Cc: Grant Likely Signed-off-by: Wolfram Sang --- drivers/spi/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a1fd73df5416..8ba4510a9519 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -199,7 +199,7 @@ config SPI_FSL_LIB depends on FSL_SOC config SPI_FSL_SPI - tristate "Freescale SPI controller" + bool "Freescale SPI controller" depends on FSL_SOC select SPI_FSL_LIB help @@ -208,7 +208,7 @@ config SPI_FSL_SPI MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. config SPI_FSL_ESPI - tristate "Freescale eSPI controller" + bool "Freescale eSPI controller" depends on FSL_SOC select SPI_FSL_LIB help From c65b53ba4f9ca4520078bab23099579da3bf0446 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 19 Nov 2011 13:08:10 +0100 Subject: [PATCH 316/364] spi/gpio: fix section mismatch warning Fixes: The function __devinit spi_gpio_probe() references a function __init spi_gpio_alloc.isra.4(). If spi_gpio_alloc.isra.4 is only used by spi_gpio_probe then annotate spi_gpio_alloc.isra.4 with a matching annotation. [wsa: fix spi_gpio_request(), too] Signed-off-by: Manuel Lauss Signed-off-by: Wolfram Sang --- drivers/spi/spi-gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index e093d3ec41ba..0094c645ff0d 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -256,7 +256,7 @@ static void spi_gpio_cleanup(struct spi_device *spi) spi_bitbang_cleanup(spi); } -static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in) +static int __devinit spi_gpio_alloc(unsigned pin, const char *label, bool is_in) { int value; @@ -270,7 +270,7 @@ static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in) return value; } -static int __init +static int __devinit spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label, u16 *res_flags) { From fe6b91f47080eb17d21cbf2a39311877d57f6938 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 6 Dec 2011 23:24:52 +0100 Subject: [PATCH 317/364] PM / Driver core: leave runtime PM enabled during system shutdown Disabling all runtime PM during system shutdown turns out not to be a good idea, because some devices may need to be woken up from a low-power state at that time. The whole point of disabling runtime PM for system shutdown was to prevent untimely runtime-suspend method calls. This patch (as1504) accomplishes the same result by incrementing the usage count for each device and waiting for ongoing runtime-PM callbacks to finish. This is what we already do during system suspend and hibernation, which makes sense since the shutdown method is pretty much a legacy analog of the pm->poweroff method. This fixes a recent regression on some OMAP systems introduced by commit af8db1508f2c9f3b6e633e2d2d906c6557c617f9 (PM / driver core: disable device's runtime PM during shutdown). Reported-and-tested-by: NeilBrown Signed-off-by: Alan Stern Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki --- drivers/base/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index d8b3d89db043..919daa7cd5b1 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1743,8 +1743,10 @@ void device_shutdown(void) */ list_del_init(&dev->kobj.entry); spin_unlock(&devices_kset->list_lock); - /* Disable all device's runtime power management */ - pm_runtime_disable(dev); + + /* Don't allow any more runtime suspends */ + pm_runtime_get_noresume(dev); + pm_runtime_barrier(dev); if (dev->bus && dev->bus->shutdown) { dev_dbg(dev, "shutdown\n"); From 062c05c46bd4358aad7a0e0cb5ffeb98ab935286 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 7 Dec 2011 19:50:42 -0500 Subject: [PATCH 318/364] Btrfs: try to allocate from cluster even at LOOP_NO_EMPTY_SIZE If we reach LOOP_NO_EMPTY_SIZE, we won't even try to use a cluster that others might have set up. Odds are that there won't be one, but if someone else succeeded in setting it up, we might as well use it, even if we don't try to set up a cluster again. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 813c6bb96c9a..db0b23b14f20 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5285,15 +5285,10 @@ alloc: spin_unlock(&block_group->free_space_ctl->tree_lock); /* - * Ok we want to try and use the cluster allocator, so lets look - * there, unless we are on LOOP_NO_EMPTY_SIZE, since we will - * have tried the cluster allocator plenty of times at this - * point and not have found anything, so we are likely way too - * fragmented for the clustering stuff to find anything, so lets - * just skip it and let the allocator find whatever block it can - * find + * Ok we want to try and use the cluster allocator, so + * lets look there */ - if (last_ptr && loop < LOOP_NO_EMPTY_SIZE) { + if (last_ptr) { /* * the refill lock keeps out other * people trying to start a new cluster @@ -5342,6 +5337,20 @@ alloc: } spin_unlock(&last_ptr->lock); refill_cluster: + /* If we are on LOOP_NO_EMPTY_SIZE, we can't + * set up a new clusters, so lets just skip it + * and let the allocator find whatever block + * it can find. If we reach this point, we + * will have tried the cluster allocator + * plenty of times and not have found + * anything, so we are likely way too + * fragmented for the clustering stuff to find + * anything. */ + if (loop >= LOOP_NO_EMPTY_SIZE) { + spin_unlock(&last_ptr->refill_lock); + goto unclustered_alloc; + } + /* * this cluster didn't work out, free it and * start over @@ -5389,6 +5398,7 @@ refill_cluster: goto loop; } +unclustered_alloc: offset = btrfs_find_space_for_alloc(block_group, search_start, num_bytes, empty_size); /* From 1d23f178d56ae1349b4fc5108ac8f4f8cdc92afc Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 15:49:12 +1100 Subject: [PATCH 319/364] md: refine interpretation of "hold_active == UNTIL_IOCTL". We like md devices to disappear when they really are not needed. However it is not possible to tell from the current state whether it is needed or not. We can only tell from recent history of changes. In particular immediately after we create an md device it looks very similar to immediately after we have finished with it. So we always preserve a newly created md device until something significant happens. This state is stored in 'hold_active'. The normal case is to keep it until an ioctl happens, as that will normally either activate it, or explicitly de-activate it. If it doesn't then it was probably created by mistake and it is now time to get rid of it. We can also modify an array via sysfs (instead of via ioctl) and we currently treat any change via sysfs like an ioctl as a sign that if it now isn't more active, it should be destroyed. However this is not appropriate as changes made via sysfs are more gradual so we should look for a more definitive change. So this patch only clears 'hold_active' from UNTIL_IOCTL to clear when the array_state is changed via sysfs. Other changes via sysfs are ignored. Signed-off-by: NeilBrown --- drivers/md/md.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 84acfe7d10e4..93b0da133507 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3788,6 +3788,8 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len) if (err) return err; else { + if (mddev->hold_active == UNTIL_IOCTL) + mddev->hold_active = 0; sysfs_notify_dirent_safe(mddev->sysfs_state); return len; } @@ -4508,8 +4510,6 @@ md_attr_store(struct kobject *kobj, struct attribute *attr, if (!capable(CAP_SYS_ADMIN)) return -EACCES; rv = mddev_lock(mddev); - if (mddev->hold_active == UNTIL_IOCTL) - mddev->hold_active = 0; if (!rv) { rv = entry->store(mddev, page, length); mddev_unlock(mddev); From af8a24347f966ab9fae6b0f127d1fbc9d6932d3a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 15:49:46 +1100 Subject: [PATCH 320/364] md: take a reference to mddev during sysfs access. When we are accessing an mddev via sysfs we know that the mddev cannot disappear because it has an embedded kobj which is refcounted by sysfs. And we also take the mddev_lock. However this is not enough. The final mddev_put could have been called and the mddev_delayed_delete is waiting for sysfs to let go so it can destroy the kobj and mddev. In this state there are a lot of changes that should not be attempted. To to guard against this we: - initialise mddev->all_mddevs in on last put so the state can be easily detected. - in md_attr_show and md_attr_store, check ->all_mddevs under all_mddevs_lock and mddev_get the mddev if it still appears to be active. This means that if we get to sysfs as the mddev is being deleted we will get -EBUSY. rdev_attr_store and rdev_attr_show are similar but already have sufficient protection. They check that rdev->mddev still points to mddev after taking mddev_lock. As this is cleared before delayed removal which can only be requested under the mddev_lock, this ensure the rdev and mddev are still alive. Signed-off-by: NeilBrown --- drivers/md/md.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 93b0da133507..f97c3b2f2f89 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -570,7 +570,7 @@ static void mddev_put(struct mddev *mddev) mddev->ctime == 0 && !mddev->hold_active) { /* Array is not configured at all, and not held active, * so destroy it */ - list_del(&mddev->all_mddevs); + list_del_init(&mddev->all_mddevs); bs = mddev->bio_set; mddev->bio_set = NULL; if (mddev->gendisk) { @@ -4489,11 +4489,20 @@ md_attr_show(struct kobject *kobj, struct attribute *attr, char *page) if (!entry->show) return -EIO; + spin_lock(&all_mddevs_lock); + if (list_empty(&mddev->all_mddevs)) { + spin_unlock(&all_mddevs_lock); + return -EBUSY; + } + mddev_get(mddev); + spin_unlock(&all_mddevs_lock); + rv = mddev_lock(mddev); if (!rv) { rv = entry->show(mddev, page); mddev_unlock(mddev); } + mddev_put(mddev); return rv; } @@ -4509,11 +4518,19 @@ md_attr_store(struct kobject *kobj, struct attribute *attr, return -EIO; if (!capable(CAP_SYS_ADMIN)) return -EACCES; + spin_lock(&all_mddevs_lock); + if (list_empty(&mddev->all_mddevs)) { + spin_unlock(&all_mddevs_lock); + return -EBUSY; + } + mddev_get(mddev); + spin_unlock(&all_mddevs_lock); rv = mddev_lock(mddev); if (!rv) { rv = entry->store(mddev, page, length); mddev_unlock(mddev); } + mddev_put(mddev); return rv; } From 52c64152a935e63d9ff73ce823730c9a23dedbff Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 16:22:48 +1100 Subject: [PATCH 321/364] md: bad blocks shouldn't cause a Blocked status on a Faulty device. Once a device is marked Faulty the badblocks - whether acknowledged or not - become irrelevant. So they shouldn't cause the device to be marked as Blocked. Without this patch, a process might write "-blocked" to clear the Blocked status, but while that will correctly fail the device, it won't remove the apparent 'blocked' status. Signed-off-by: NeilBrown --- drivers/md/md.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index f97c3b2f2f89..d730e8f513a7 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2546,7 +2546,8 @@ state_show(struct md_rdev *rdev, char *page) sep = ","; } if (test_bit(Blocked, &rdev->flags) || - rdev->badblocks.unacked_exist) { + (rdev->badblocks.unacked_exist + && !test_bit(Faulty, &rdev->flags))) { len += sprintf(page+len, "%sblocked", sep); sep = ","; } From 8bd2f0a05b361e07d48bb34398593f5f523946b3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 16:26:08 +1100 Subject: [PATCH 322/364] md: ensure new badblocks are handled promptly. When we mark blocks as bad we need them to be acknowledged by the metadata handler promptly. For an in-kernel metadata handler that was already being done. But for an external metadata handler we need to alert it of the change by sending a notification through the sysfs file. This adds that notification. Signed-off-by: NeilBrown --- drivers/md/md.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index d730e8f513a7..ee981737edfc 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7858,6 +7858,7 @@ int rdev_set_badblocks(struct md_rdev *rdev, sector_t s, int sectors, s + rdev->data_offset, sectors, acknowledged); if (rv) { /* Make sure they get written out promptly */ + sysfs_notify_dirent_safe(rdev->sysfs_state); set_bit(MD_CHANGE_CLEAN, &rdev->mddev->flags); md_wakeup_thread(rdev->mddev->thread); } From 9283d8c5af4cdcb809e655acdf4be368afec8b58 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 16:27:57 +1100 Subject: [PATCH 323/364] md/raid5: never wait for bad-block acks on failed device. Once a device is failed we really want to completely ignore it. It should go away soon anyway. In particular the presence of bad blocks on it should not cause us to block as we won't be trying to write there anyway. So as soon as we can check if a device is Faulty, do so and pretend that it is already gone if it is Faulty. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 297e26092178..b0dec01028f4 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3036,6 +3036,8 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) if (dev->written) s->written++; rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(Faulty, &rdev->flags)) + rdev = NULL; if (rdev) { is_bad = is_badblock(rdev, sh->sector, STRIPE_SECTORS, &first_bad, &bad_sectors); @@ -3063,7 +3065,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) } } else if (test_bit(In_sync, &rdev->flags)) set_bit(R5_Insync, &dev->flags); - else if (!test_bit(Faulty, &rdev->flags)) { + else { /* in sync if before recovery_offset */ if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset) set_bit(R5_Insync, &dev->flags); From c564a0cb9d0c7f4ac50f1e9ca8bc67fd66cd550f Mon Sep 17 00:00:00 2001 From: "Jett.Zhou" Date: Wed, 30 Nov 2011 14:32:54 +0800 Subject: [PATCH 324/364] ARM: sa1100: fix build error arm-eabi-4.4.3-ld:--defsym zreladdr=: syntax error make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1 make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2 make: *** [uImage] Error 2 Signed-off-by: Haojian Zhuang Signed-off-by: Jett.Zhou --- arch/arm/mach-sa1100/Makefile.boot | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot index 5a616f6e5612..f7951aa04562 100644 --- a/arch/arm/mach-sa1100/Makefile.boot +++ b/arch/arm/mach-sa1100/Makefile.boot @@ -1,5 +1,5 @@ -ifeq ($(CONFIG_ARCH_SA1100),y) - zreladdr-$(CONFIG_SA1111) += 0xc0208000 +ifeq ($(CONFIG_SA1111),y) + zreladdr-y += 0xc0208000 else zreladdr-y += 0xc0008000 endif From 274bd4fb3ed6b72c1d77ef8850511f09fc6b8e4d Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 7 Dec 2011 20:08:40 -0500 Subject: [PATCH 325/364] Btrfs: try cluster but don't advance in search list When we find an existing cluster, we switch to its block group as the current block group, possibly skipping multiple blocks in the process. Furthermore, under heavy contention, multiple threads may fail to allocate from a cluster and then release just-created clusters just to proceed to create new ones in a different block group. This patch tries to allocate from an existing cluster regardless of its block group, and doesn't switch to that group, instead proceeding to try to allocate a cluster from the group it was iterating before the attempt. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 74 ++++++++++++++++++------------------------ 1 file changed, 31 insertions(+), 43 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index db0b23b14f20..05e1386b8bec 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5106,11 +5106,11 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, struct btrfs_root *root = orig_root->fs_info->extent_root; struct btrfs_free_cluster *last_ptr = NULL; struct btrfs_block_group_cache *block_group = NULL; + struct btrfs_block_group_cache *used_block_group; int empty_cluster = 2 * 1024 * 1024; int allowed_chunk_alloc = 0; int done_chunk_alloc = 0; struct btrfs_space_info *space_info; - int last_ptr_loop = 0; int loop = 0; int index = 0; int alloc_type = (data & BTRFS_BLOCK_GROUP_DATA) ? @@ -5172,6 +5172,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, ideal_cache: block_group = btrfs_lookup_block_group(root->fs_info, search_start); + used_block_group = block_group; /* * we don't want to use the block group if it doesn't match our * allocation bits, or if its not cached. @@ -5209,6 +5210,7 @@ search: u64 offset; int cached; + used_block_group = block_group; btrfs_get_block_group(block_group); search_start = block_group->key.objectid; @@ -5294,49 +5296,33 @@ alloc: * people trying to start a new cluster */ spin_lock(&last_ptr->refill_lock); - if (!last_ptr->block_group || - last_ptr->block_group->ro || - !block_group_bits(last_ptr->block_group, data)) + used_block_group = last_ptr->block_group; + if (used_block_group != block_group && + (!used_block_group || + used_block_group->ro || + !block_group_bits(used_block_group, data))) { + used_block_group = block_group; goto refill_cluster; + } - offset = btrfs_alloc_from_cluster(block_group, last_ptr, - num_bytes, search_start); + if (used_block_group != block_group) + btrfs_get_block_group(used_block_group); + + offset = btrfs_alloc_from_cluster(used_block_group, + last_ptr, num_bytes, used_block_group->key.objectid); if (offset) { /* we have a block, we're done */ spin_unlock(&last_ptr->refill_lock); goto checks; } - spin_lock(&last_ptr->lock); - /* - * whoops, this cluster doesn't actually point to - * this block group. Get a ref on the block - * group is does point to and try again - */ - if (!last_ptr_loop && last_ptr->block_group && - last_ptr->block_group != block_group && - index <= - get_block_group_index(last_ptr->block_group)) { - - btrfs_put_block_group(block_group); - block_group = last_ptr->block_group; - btrfs_get_block_group(block_group); - spin_unlock(&last_ptr->lock); - spin_unlock(&last_ptr->refill_lock); - - last_ptr_loop = 1; - search_start = block_group->key.objectid; - /* - * we know this block group is properly - * in the list because - * btrfs_remove_block_group, drops the - * cluster before it removes the block - * group from the list - */ - goto have_block_group; + WARN_ON(last_ptr->block_group != used_block_group); + if (used_block_group != block_group) { + btrfs_put_block_group(used_block_group); + used_block_group = block_group; } - spin_unlock(&last_ptr->lock); refill_cluster: + BUG_ON(used_block_group != block_group); /* If we are on LOOP_NO_EMPTY_SIZE, we can't * set up a new clusters, so lets just skip it * and let the allocator find whatever block @@ -5357,8 +5343,6 @@ refill_cluster: */ btrfs_return_cluster_to_free_space(NULL, last_ptr); - last_ptr_loop = 0; - /* allocate a cluster in this block group */ ret = btrfs_find_space_cluster(trans, root, block_group, last_ptr, @@ -5425,14 +5409,14 @@ checks: search_start = stripe_align(root, offset); /* move on to the next group */ if (search_start + num_bytes >= search_end) { - btrfs_add_free_space(block_group, offset, num_bytes); + btrfs_add_free_space(used_block_group, offset, num_bytes); goto loop; } /* move on to the next group */ if (search_start + num_bytes > - block_group->key.objectid + block_group->key.offset) { - btrfs_add_free_space(block_group, offset, num_bytes); + used_block_group->key.objectid + used_block_group->key.offset) { + btrfs_add_free_space(used_block_group, offset, num_bytes); goto loop; } @@ -5440,14 +5424,14 @@ checks: ins->offset = num_bytes; if (offset < search_start) - btrfs_add_free_space(block_group, offset, + btrfs_add_free_space(used_block_group, offset, search_start - offset); BUG_ON(offset > search_start); - ret = btrfs_update_reserved_bytes(block_group, num_bytes, + ret = btrfs_update_reserved_bytes(used_block_group, num_bytes, alloc_type); if (ret == -EAGAIN) { - btrfs_add_free_space(block_group, offset, num_bytes); + btrfs_add_free_space(used_block_group, offset, num_bytes); goto loop; } @@ -5456,15 +5440,19 @@ checks: ins->offset = num_bytes; if (offset < search_start) - btrfs_add_free_space(block_group, offset, + btrfs_add_free_space(used_block_group, offset, search_start - offset); BUG_ON(offset > search_start); + if (used_block_group != block_group) + btrfs_put_block_group(used_block_group); btrfs_put_block_group(block_group); break; loop: failed_cluster_refill = false; failed_alloc = false; BUG_ON(index != get_block_group_index(block_group)); + if (used_block_group != block_group) + btrfs_put_block_group(used_block_group); btrfs_put_block_group(block_group); } up_read(&space_info->groups_sem); From a5d16333612718569ffd26064270e535cb9c3928 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 7 Dec 2011 20:08:40 -0500 Subject: [PATCH 326/364] Btrfs: check if the to-be-added device is writable If we call ioctl(BTRFS_IOC_ADD_DEV) directly, we'll succeed in adding a readonly device to a btrfs filesystem, and btrfs will write to that device, emitting kernel errors: [ 3109.833692] lost page write due to I/O error on loop2 [ 3109.833720] lost page write due to I/O error on loop2 ... Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index c37433d3cd82..0a8c8f8304b1 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1611,7 +1611,7 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) if ((sb->s_flags & MS_RDONLY) && !root->fs_info->fs_devices->seeding) return -EINVAL; - bdev = blkdev_get_by_path(device_path, FMODE_EXCL, + bdev = blkdev_get_by_path(device_path, FMODE_WRITE | FMODE_EXCL, root->fs_info->bdev_holder); if (IS_ERR(bdev)) return PTR_ERR(bdev); From 1cf4ffdb3289624a6462c94f2ce05545b32ef736 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Wed, 7 Dec 2011 20:08:40 -0500 Subject: [PATCH 327/364] Btrfs: drop spin lock when memory alloc fails Drop spin lock in convert_extent_bit() when memory alloc fails, otherwise, it will be a deadlock. Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index be1bf627a14b..49f3c9dc09f4 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -935,8 +935,10 @@ again: node = tree_search(tree, start); if (!node) { prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } err = insert_state(tree, prealloc, start, end, &bits); prealloc = NULL; BUG_ON(err == -EEXIST); @@ -992,8 +994,10 @@ hit_next: */ if (state->start < start) { prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } err = split_state(tree, state, prealloc, start); BUG_ON(err == -EEXIST); prealloc = NULL; @@ -1024,8 +1028,10 @@ hit_next: this_end = last_start - 1; prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } /* * Avoid to free 'prealloc' if it can be merged with @@ -1051,8 +1057,10 @@ hit_next: */ if (state->start <= end && state->end > end) { prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } err = split_state(tree, state, prealloc, end + 1); BUG_ON(err == -EEXIST); From 2ded6e6a94c98ea453a156748cb7fabaf39a76b9 Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Fri, 18 Nov 2011 16:33:06 +0100 Subject: [PATCH 328/364] x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked When HPET is operating in RTC mode, the TN_ENABLE bit on timer1 controls whether the HPET or the RTC delivers interrupts to irq8. When the system goes into suspend, the RTC driver sends a signal to the HPET driver so that the HPET releases control of irq8, allowing the RTC to wake the system from suspend. The switchover is accomplished by a write to the HPET configuration registers which currently only occurs while servicing the HPET interrupt. On some systems, I have seen the system suspend before an HPET interrupt occurs, preventing the write to the HPET configuration register and leaving the HPET in control of the irq8. As the HPET is not active during suspend, it does not generate a wake signal and RTC alarms do not work. This patch forces the HPET driver to immediately transfer control of the irq8 channel to the RTC instead of waiting until the next interrupt event. Signed-off-by: Mark Langsdorf Link: http://lkml.kernel.org/r/20111118153306.GB16319@alberich.amd.com Tested-by: Andreas Herrmann Signed-off-by: Andreas Herrmann Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org --- arch/x86/kernel/hpet.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index b946a9eac7d9..1bb0bf4d92cd 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -1049,6 +1049,14 @@ int hpet_rtc_timer_init(void) } EXPORT_SYMBOL_GPL(hpet_rtc_timer_init); +static void hpet_disable_rtc_channel(void) +{ + unsigned long cfg; + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); +} + /* * The functions below are called from rtc driver. * Return 0 if HPET is not being used. @@ -1060,6 +1068,9 @@ int hpet_mask_rtc_irq_bit(unsigned long bit_mask) return 0; hpet_rtc_flags &= ~bit_mask; + if (unlikely(!hpet_rtc_flags)) + hpet_disable_rtc_channel(); + return 1; } EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit); @@ -1125,15 +1136,11 @@ EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq); static void hpet_rtc_timer_reinit(void) { - unsigned int cfg, delta; + unsigned int delta; int lost_ints = -1; - if (unlikely(!hpet_rtc_flags)) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } + if (unlikely(!hpet_rtc_flags)) + hpet_disable_rtc_channel(); if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) delta = hpet_default_delta; From 1418a3e5ad4d01b1d4abf2c479c50b0cedd59e3f Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 8 Dec 2011 21:24:06 +0900 Subject: [PATCH 329/364] TOMOYO: Fix pathname handling of disconnected paths. Current tomoyo_realpath_from_path() implementation returns strange pathname when calculating pathname of a file which belongs to lazy unmounted tree. Use local pathname rather than strange absolute pathname in that case. Also, this patch fixes a regression by commit 02125a82 "fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API". Signed-off-by: Tetsuo Handa Acked-by: Al Viro Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- security/tomoyo/realpath.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c index 36fa7c9bedc4..d9f3ced8756e 100644 --- a/security/tomoyo/realpath.c +++ b/security/tomoyo/realpath.c @@ -293,8 +293,16 @@ char *tomoyo_realpath_from_path(struct path *path) pos = tomoyo_get_local_path(path->dentry, buf, buf_len - 1); /* Get absolute name for the rest. */ - else + else { pos = tomoyo_get_absolute_path(path, buf, buf_len - 1); + /* + * Fall back to local name if absolute name is not + * available. + */ + if (pos == ERR_PTR(-EINVAL)) + pos = tomoyo_get_local_path(path->dentry, buf, + buf_len - 1); + } encode: if (IS_ERR(pos)) continue; From 5d8c71f9e5fbdd95650be00294d238e27a363b5c Mon Sep 17 00:00:00 2001 From: Adam Kwolek Date: Fri, 9 Dec 2011 14:26:11 +1100 Subject: [PATCH 330/364] md: raid5 crash during degradation NULL pointer access causes crash in raid5 module. Signed-off-by: Adam Kwolek Signed-off-by: NeilBrown --- drivers/md/raid5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index b0dec01028f4..31670f8d6b65 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3070,7 +3070,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset) set_bit(R5_Insync, &dev->flags); } - if (test_bit(R5_WriteError, &dev->flags)) { + if (rdev && test_bit(R5_WriteError, &dev->flags)) { clear_bit(R5_Insync, &dev->flags); if (!test_bit(Faulty, &rdev->flags)) { s->handle_bad_blocks = 1; @@ -3078,7 +3078,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) } else clear_bit(R5_WriteError, &dev->flags); } - if (test_bit(R5_MadeGood, &dev->flags)) { + if (rdev && test_bit(R5_MadeGood, &dev->flags)) { if (!test_bit(Faulty, &rdev->flags)) { s->handle_bad_blocks = 1; atomic_inc(&rdev->nr_pending); From 9a5101c8968c7b3e7de5564af6358d7332cf9a6b Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Mon, 7 Nov 2011 16:11:24 +0300 Subject: [PATCH 331/364] CIFS: Add descriptions to the brlock cache functions Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/file.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index cf0b1539b321..4dd9283885e7 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -702,6 +702,13 @@ cifs_find_lock_conflict(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock, lock->type, lock->netfid, conf_lock); } +/* + * Check if there is another lock that prevents us to set the lock (mandatory + * style). If such a lock exists, update the flock structure with its + * properties. Otherwise, set the flock type to F_UNLCK if we can cache brlocks + * or leave it the same if we can't. Returns 0 if we don't need to request to + * the server or 1 otherwise. + */ static int cifs_lock_test(struct cifsInodeInfo *cinode, __u64 offset, __u64 length, __u8 type, __u16 netfid, struct file_lock *flock) @@ -739,6 +746,12 @@ cifs_lock_add(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock) mutex_unlock(&cinode->lock_mutex); } +/* + * Set the byte-range lock (mandatory style). Returns: + * 1) 0, if we set the lock and don't need to request to the server; + * 2) 1, if no locks prevent us but we need to request to the server; + * 3) -EACCESS, if there is a lock that prevents us and wait is false. + */ static int cifs_lock_add_if(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock, bool wait) @@ -778,6 +791,13 @@ try_again: return rc; } +/* + * Check if there is another lock that prevents us to set the lock (posix + * style). If such a lock exists, update the flock structure with its + * properties. Otherwise, set the flock type to F_UNLCK if we can cache brlocks + * or leave it the same if we can't. Returns 0 if we don't need to request to + * the server or 1 otherwise. + */ static int cifs_posix_lock_test(struct file *file, struct file_lock *flock) { @@ -800,6 +820,12 @@ cifs_posix_lock_test(struct file *file, struct file_lock *flock) return rc; } +/* + * Set the byte-range lock (posix style). Returns: + * 1) 0, if we set the lock and don't need to request to the server; + * 2) 1, if we need to request to the server; + * 3) <0, if the error occurs while setting the lock. + */ static int cifs_posix_lock_set(struct file *file, struct file_lock *flock) { From 59edb63ad08e4f3a9477223c9aaf3fba753085bf Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 10 Nov 2011 12:48:20 -0600 Subject: [PATCH 332/364] cifs: Fix sparse warning when calling cifs_strtoUCS Fix sparse endian check warning while calling cifs_strtoUCS CHECK fs/cifs/smbencrypt.c fs/cifs/smbencrypt.c:216:37: warning: incorrect type in argument 1 (different base types) fs/cifs/smbencrypt.c:216:37: expected restricted __le16 [usertype] * fs/cifs/smbencrypt.c:216:37: got unsigned short * Signed-off-by: Steve French Acked-by: Shirish Pargaonkar Date: Thu, 1 Dec 2011 20:22:41 -0500 Subject: [PATCH 333/364] cifs: attempt to freeze while looping on a receive attempt In the recent overhaul of the demultiplex thread receive path, I neglected to ensure that we attempt to freeze on each pass through the receive loop. Reported-and-Tested-by: Woody Suwalski Reported-and-Tested-by: Adam Williamson Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index d6a972df0338..8cd4b52d4217 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -441,6 +441,8 @@ cifs_readv_from_socket(struct TCP_Server_Info *server, struct kvec *iov_orig, smb_msg.msg_controllen = 0; for (total_read = 0; to_read; total_read += length, to_read -= length) { + try_to_freeze(); + if (server_unresponsive(server)) { total_read = -EAGAIN; break; From 7023676f9ee851d94f0942e879243fc1f9081c47 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 1 Dec 2011 20:23:34 -0500 Subject: [PATCH 334/364] cifs: check for NULL last_entry before calling cifs_save_resume_key Prior to commit eaf35b1, cifs_save_resume_key had some NULL pointer checks at the top. It turns out that at least one of those NULL pointer checks is needed after all. When the LastNameOffset in a FIND reply appears to be beyond the end of the buffer, CIFSFindFirst and CIFSFindNext will set srch_inf.last_entry to NULL. Since eaf35b1, the code will now oops in this situation. Fix this by having the callers check for a NULL last entry pointer before calling cifs_save_resume_key. No change is needed for the call site in cifs_readdir as it's not reachable with a NULL current_entry pointer. This should fix: https://bugzilla.redhat.com/show_bug.cgi?id=750247 Cc: stable@vger.kernel.org Cc: Christoph Hellwig Reported-by: Adam G. Metzler Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/readdir.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 5de03ec20144..a090bbe6ee29 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -554,7 +554,10 @@ static int find_cifs_entry(const int xid, struct cifs_tcon *pTcon, rc); return rc; } - cifs_save_resume_key(cifsFile->srch_inf.last_entry, cifsFile); + /* FindFirst/Next set last_entry to NULL on malformed reply */ + if (cifsFile->srch_inf.last_entry) + cifs_save_resume_key(cifsFile->srch_inf.last_entry, + cifsFile); } while ((index_to_find >= cifsFile->srch_inf.index_of_last_entry) && @@ -562,7 +565,10 @@ static int find_cifs_entry(const int xid, struct cifs_tcon *pTcon, cFYI(1, "calling findnext2"); rc = CIFSFindNext(xid, pTcon, cifsFile->netfid, &cifsFile->srch_inf); - cifs_save_resume_key(cifsFile->srch_inf.last_entry, cifsFile); + /* FindFirst/Next set last_entry to NULL on malformed reply */ + if (cifsFile->srch_inf.last_entry) + cifs_save_resume_key(cifsFile->srch_inf.last_entry, + cifsFile); if (rc) return -ENOENT; } From e8c7106280a305e1ff2a3a8a4dfce141469fb039 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Fri, 18 Nov 2011 13:09:11 +0000 Subject: [PATCH 335/364] x86, efi: Calling __pa() with an ioremap()ed address is invalid If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set in ->attribute we currently call set_memory_uc(), which in turn calls __pa() on a potentially ioremap'd address. On CONFIG_X86_32 this is invalid, resulting in the following oops on some machines: BUG: unable to handle kernel paging request at f7f22280 IP: [] reserve_ram_pages_type+0x89/0x210 [...] Call Trace: [] ? page_is_ram+0x1a/0x40 [] reserve_memtype+0xdf/0x2f0 [] set_memory_uc+0x49/0xa0 [] efi_enter_virtual_mode+0x1c2/0x3aa [] start_kernel+0x291/0x2f2 [] ? loglevel+0x1b/0x1b [] i386_start_kernel+0xbf/0xc8 A better approach to this problem is to map the memory region with the correct attributes from the start, instead of modifying it after the fact. The uncached case can be handled by ioremap_nocache() and the cached by ioremap_cache(). Despite first impressions, it's not possible to use ioremap_cache() to map all cached memory regions on CONFIG_X86_64 because EFI_RUNTIME_SERVICES_DATA regions really don't like being mapped into the vmalloc space, as detailed in the following bug report, https://bugzilla.redhat.com/show_bug.cgi?id=748516 Therefore, we need to ensure that any EFI_RUNTIME_SERVICES_DATA regions are covered by the direct kernel mapping table on CONFIG_X86_64. To accomplish this we now map E820_RESERVED_EFI regions via the direct kernel mapping with the initial call to init_memory_mapping() in setup_arch(), whereas previously these regions wouldn't be mapped if they were after the last E820_RAM region until efi_ioremap() was called. Doing it this way allows us to delete efi_ioremap() completely. Signed-off-by: Matt Fleming Cc: H. Peter Anvin Cc: Matthew Garrett Cc: Zhang Rui Cc: Huang Ying Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console-pimps.org Signed-off-by: Ingo Molnar --- arch/x86/include/asm/e820.h | 8 ++++++++ arch/x86/include/asm/efi.h | 5 ----- arch/x86/kernel/e820.c | 3 ++- arch/x86/kernel/setup.c | 21 ++++++++++++++++++++- arch/x86/platform/efi/efi.c | 29 ++++++++++++++++++----------- arch/x86/platform/efi/efi_64.c | 17 ----------------- 6 files changed, 48 insertions(+), 35 deletions(-) diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index 908b96957d88..c9547033e38e 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -53,6 +53,13 @@ */ #define E820_RESERVED_KERN 128 +/* + * Address ranges that need to be mapped by the kernel direct + * mapping. This is used to make sure regions such as + * EFI_RUNTIME_SERVICES_DATA are directly mapped. See setup_arch(). + */ +#define E820_RESERVED_EFI 129 + #ifndef __ASSEMBLY__ #include struct e820entry { @@ -115,6 +122,7 @@ static inline void early_memtest(unsigned long start, unsigned long end) } #endif +extern unsigned long e820_end_pfn(unsigned long limit_pfn, unsigned type); extern unsigned long e820_end_of_ram_pfn(void); extern unsigned long e820_end_of_low_ram_pfn(void); extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 7093e4a6a0bc..b8d8bfcd44a9 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -33,8 +33,6 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \ efi_call_virt(f, a1, a2, a3, a4, a5, a6) -#define efi_ioremap(addr, size, type) ioremap_cache(addr, size) - #else /* !CONFIG_X86_32 */ extern u64 efi_call0(void *fp); @@ -84,9 +82,6 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3, efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \ (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6)) -extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, - u32 type); - #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 303a0e48f076..65ffd110a81b 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -135,6 +135,7 @@ static void __init e820_print_type(u32 type) printk(KERN_CONT "(usable)"); break; case E820_RESERVED: + case E820_RESERVED_EFI: printk(KERN_CONT "(reserved)"); break; case E820_ACPI: @@ -783,7 +784,7 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) /* * Find the highest page frame number we have available */ -static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) +unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) { int i; unsigned long last_pfn = 0; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index cf0ef986cb6d..9a9e40fb091c 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -691,6 +691,8 @@ early_param("reservelow", parse_reservelow); void __init setup_arch(char **cmdline_p) { + unsigned long end_pfn; + #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); @@ -932,7 +934,24 @@ void __init setup_arch(char **cmdline_p) init_gbpages(); /* max_pfn_mapped is updated here */ - max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<>PAGE_SHIFT, E820_RESERVED_EFI); + if (efi_end > max_low_pfn) + end_pfn = efi_end; + } +#endif + + max_low_pfn_mapped = init_memory_mapping(0, end_pfn << PAGE_SHIFT); max_pfn_mapped = max_low_pfn_mapped; #ifdef CONFIG_X86_64 diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 37718f0f053d..c9718a16be15 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -323,10 +323,13 @@ static void __init do_add_efi_memmap(void) case EFI_UNUSABLE_MEMORY: e820_type = E820_UNUSABLE; break; + case EFI_RUNTIME_SERVICES_DATA: + e820_type = E820_RESERVED_EFI; + break; default: /* * EFI_RESERVED_TYPE EFI_RUNTIME_SERVICES_CODE - * EFI_RUNTIME_SERVICES_DATA EFI_MEMORY_MAPPED_IO + * EFI_MEMORY_MAPPED_IO * EFI_MEMORY_MAPPED_IO_PORT_SPACE EFI_PAL_CODE */ e820_type = E820_RESERVED; @@ -671,10 +674,21 @@ void __init efi_enter_virtual_mode(void) end_pfn = PFN_UP(end); if (end_pfn <= max_low_pfn_mapped || (end_pfn > (1UL << (32 - PAGE_SHIFT)) - && end_pfn <= max_pfn_mapped)) + && end_pfn <= max_pfn_mapped)) { va = __va(md->phys_addr); - else - va = efi_ioremap(md->phys_addr, size, md->type); + + if (!(md->attribute & EFI_MEMORY_WB)) { + addr = (u64) (unsigned long)va; + npages = md->num_pages; + memrange_efi_to_native(&addr, &npages); + set_memory_uc(addr, npages); + } + } else { + if (!(md->attribute & EFI_MEMORY_WB)) + va = ioremap_nocache(md->phys_addr, size); + else + va = ioremap_cache(md->phys_addr, size); + } md->virt_addr = (u64) (unsigned long) va; @@ -684,13 +698,6 @@ void __init efi_enter_virtual_mode(void) continue; } - if (!(md->attribute & EFI_MEMORY_WB)) { - addr = md->virt_addr; - npages = md->num_pages; - memrange_efi_to_native(&addr, &npages); - set_memory_uc(addr, npages); - } - systab = (u64) (unsigned long) efi_phys.systab; if (md->phys_addr <= systab && systab < end) { systab += md->virt_addr - md->phys_addr; diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index ac3aa54e2654..312250c6b2de 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -80,20 +80,3 @@ void __init efi_call_phys_epilog(void) local_irq_restore(efi_flags); early_code_mapping_set_exec(0); } - -void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, - u32 type) -{ - unsigned long last_map_pfn; - - if (type == EFI_MEMORY_MAPPED_IO) - return ioremap(phys_addr, size); - - last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); - if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) { - unsigned long top = last_map_pfn << PAGE_SHIFT; - efi_ioremap(top, size - (top - phys_addr), type); - } - - return (void __iomem *)__va(phys_addr); -} From b2c1639135c0fc1560f3fe9a3a83f2c8265a9e02 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 8 Dec 2011 20:21:40 -0800 Subject: [PATCH 336/364] MAINTAINERS: Update amd-iommu F: patterns Commit 29b68415e335 ("x86: amd_iommu: move to drivers/iommu/") moved the files, update the patterns. CC: Ohad Ben-Cohen CC: Joerg Roedel Signed-off-by: Joe Perches Signed-off-by: Joerg Roedel --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4808256446f2..c267601ce9e1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -511,8 +511,8 @@ M: Joerg Roedel L: iommu@lists.linux-foundation.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git S: Supported -F: arch/x86/kernel/amd_iommu*.c -F: arch/x86/include/asm/amd_iommu*.h +F: drivers/iommu/amd_iommu*.[ch] +F: include/linux/amd-iommu.h AMD MICROCODE UPDATE SUPPORT M: Andreas Herrmann From 635697c663f38106063d5659f0cf2e45afcd4bb5 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 8 Dec 2011 14:33:51 -0800 Subject: [PATCH 337/364] vmscan: fix initial shrinker size handling A shrinker function can return -1, means that it cannot do anything without a risk of deadlock. For example prune_super() does this if it cannot grab a superblock refrence, even if nr_to_scan=0. Currently we interpret this -1 as a ULONG_MAX size shrinker and evaluate `total_scan' according to this. So the next time around this shrinker can cause really big pressure. Let's skip such shrinkers instead. Also make total_scan signed, otherwise the check (total_scan < 0) below never works. Signed-off-by: Konstantin Khlebnikov Cc: Dave Chinner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index a1893c050795..f5255442ae2b 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -247,14 +247,18 @@ unsigned long shrink_slab(struct shrink_control *shrink, list_for_each_entry(shrinker, &shrinker_list, list) { unsigned long long delta; - unsigned long total_scan; - unsigned long max_pass; + long total_scan; + long max_pass; int shrink_ret = 0; long nr; long new_nr; long batch_size = shrinker->batch ? shrinker->batch : SHRINK_BATCH; + max_pass = do_shrinker_shrink(shrinker, shrink, 0); + if (max_pass <= 0) + continue; + /* * copy the current shrinker scan count into a local variable * and zero it so that other concurrent shrinker invocations @@ -265,7 +269,6 @@ unsigned long shrink_slab(struct shrink_control *shrink, } while (cmpxchg(&shrinker->nr, nr, 0) != nr); total_scan = nr; - max_pass = do_shrinker_shrink(shrinker, shrink, 0); delta = (4 * nr_pages_scanned) / shrinker->seeks; delta *= max_pass; do_div(delta, lru_pages + 1); From 83aeeada7c69f35e5100b27ec354335597a7a488 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 8 Dec 2011 14:33:54 -0800 Subject: [PATCH 338/364] vmscan: use atomic-long for shrinker batching Use atomic-long operations instead of looping around cmpxchg(). [akpm@linux-foundation.org: massage atomic.h inclusions] Signed-off-by: Konstantin Khlebnikov Cc: Dave Chinner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 2 +- include/linux/mm.h | 1 + include/linux/shrinker.h | 2 +- mm/vmscan.c | 17 +++++++---------- 4 files changed, 10 insertions(+), 12 deletions(-) diff --git a/include/linux/fs.h b/include/linux/fs.h index 019dc558df1a..e0bc4ffb8e7f 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -393,8 +393,8 @@ struct inodes_stat_t { #include #include #include -#include #include +#include #include diff --git a/include/linux/mm.h b/include/linux/mm.h index 3dc3a8c2c485..4baadd18f4ad 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h index a83833a1f7a2..07ceb97d53fa 100644 --- a/include/linux/shrinker.h +++ b/include/linux/shrinker.h @@ -35,7 +35,7 @@ struct shrinker { /* These are for internal use */ struct list_head list; - long nr; /* objs pending delete */ + atomic_long_t nr_in_batch; /* objs pending delete */ }; #define DEFAULT_SEEKS 2 /* A good number if you don't know better. */ extern void register_shrinker(struct shrinker *); diff --git a/mm/vmscan.c b/mm/vmscan.c index f5255442ae2b..f54a05b7a61d 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -183,7 +183,7 @@ static unsigned long zone_nr_lru_pages(struct zone *zone, */ void register_shrinker(struct shrinker *shrinker) { - shrinker->nr = 0; + atomic_long_set(&shrinker->nr_in_batch, 0); down_write(&shrinker_rwsem); list_add_tail(&shrinker->list, &shrinker_list); up_write(&shrinker_rwsem); @@ -264,9 +264,7 @@ unsigned long shrink_slab(struct shrink_control *shrink, * and zero it so that other concurrent shrinker invocations * don't also do this scanning work. */ - do { - nr = shrinker->nr; - } while (cmpxchg(&shrinker->nr, nr, 0) != nr); + nr = atomic_long_xchg(&shrinker->nr_in_batch, 0); total_scan = nr; delta = (4 * nr_pages_scanned) / shrinker->seeks; @@ -328,12 +326,11 @@ unsigned long shrink_slab(struct shrink_control *shrink, * manner that handles concurrent updates. If we exhausted the * scan, there is no need to do an update. */ - do { - nr = shrinker->nr; - new_nr = total_scan + nr; - if (total_scan <= 0) - break; - } while (cmpxchg(&shrinker->nr, nr, new_nr) != nr); + if (total_scan > 0) + new_nr = atomic_long_add_return(total_scan, + &shrinker->nr_in_batch); + else + new_nr = atomic_long_read(&shrinker->nr_in_batch); trace_mm_shrink_slab_end(shrinker, shrink_ret, nr, new_nr); } From b53fc7c2974a50913f49e1d800fe904a28c338e3 Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Thu, 8 Dec 2011 14:33:56 -0800 Subject: [PATCH 339/364] fs/proc/meminfo.c: fix compilation error Fix the error message "directives may not be used inside a macro argument" which appears when the kernel is compiled for the cris architecture. Signed-off-by: Claudio Scordino Cc: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/meminfo.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c index 586174168e2a..80e4645f7990 100644 --- a/fs/proc/meminfo.c +++ b/fs/proc/meminfo.c @@ -131,12 +131,13 @@ static int meminfo_proc_show(struct seq_file *m, void *v) K(i.freeswap), K(global_page_state(NR_FILE_DIRTY)), K(global_page_state(NR_WRITEBACK)), - K(global_page_state(NR_ANON_PAGES) #ifdef CONFIG_TRANSPARENT_HUGEPAGE + K(global_page_state(NR_ANON_PAGES) + global_page_state(NR_ANON_TRANSPARENT_HUGEPAGES) * - HPAGE_PMD_NR + HPAGE_PMD_NR), +#else + K(global_page_state(NR_ANON_PAGES)), #endif - ), K(global_page_state(NR_FILE_MAPPED)), K(global_page_state(NR_SHMEM)), K(global_page_state(NR_SLAB_RECLAIMABLE) + From 1dfb059b9438633b0546c5431538a47f6ed99028 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Thu, 8 Dec 2011 14:33:57 -0800 Subject: [PATCH 340/364] thp: reduce khugepaged freezing latency khugepaged can sometimes cause suspend to fail, requiring that the user retry the suspend operation. Use wait_event_freezable_timeout() instead of schedule_timeout_interruptible() to avoid missing freezer wakeups. A try_to_freeze() would have been needed in the khugepaged_alloc_hugepage tight loop too in case of the allocation failing repeatedly, and wait_event_freezable_timeout will provide it too. khugepaged would still freeze just fine by trying again the next minute but it's better if it freezes immediately. Reported-by: Jiri Slaby Signed-off-by: Andrea Arcangeli Tested-by: Jiri Slaby Cc: Tejun Heo Cc: Oleg Nesterov Cc: "Srivatsa S. Bhat" Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 4298abaae153..36b3d988b4ef 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2259,12 +2259,8 @@ static void khugepaged_do_scan(struct page **hpage) static void khugepaged_alloc_sleep(void) { - DEFINE_WAIT(wait); - add_wait_queue(&khugepaged_wait, &wait); - schedule_timeout_interruptible( - msecs_to_jiffies( - khugepaged_alloc_sleep_millisecs)); - remove_wait_queue(&khugepaged_wait, &wait); + wait_event_freezable_timeout(khugepaged_wait, false, + msecs_to_jiffies(khugepaged_alloc_sleep_millisecs)); } #ifndef CONFIG_NUMA @@ -2313,14 +2309,10 @@ static void khugepaged_loop(void) if (unlikely(kthread_should_stop())) break; if (khugepaged_has_work()) { - DEFINE_WAIT(wait); if (!khugepaged_scan_sleep_millisecs) continue; - add_wait_queue(&khugepaged_wait, &wait); - schedule_timeout_interruptible( - msecs_to_jiffies( - khugepaged_scan_sleep_millisecs)); - remove_wait_queue(&khugepaged_wait, &wait); + wait_event_freezable_timeout(khugepaged_wait, false, + msecs_to_jiffies(khugepaged_scan_sleep_millisecs)); } else if (khugepaged_enabled()) wait_event_freezable(khugepaged_wait, khugepaged_wait_event()); From 1de8ad43d0048963d0a0adf14bb046340426b1e4 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 8 Dec 2011 14:34:00 -0800 Subject: [PATCH 341/364] CREDITS: update Kees's expired fingerprint and fix details Small clean-up for my CREDITS entry; the GPG fingerprint was not up to date, so I fixed other details at the same time too. Signed-off-by: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- CREDITS | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/CREDITS b/CREDITS index 07e32a87d956..44fce988eaac 100644 --- a/CREDITS +++ b/CREDITS @@ -688,10 +688,13 @@ S: Oxfordshire, UK. N: Kees Cook E: kees@outflux.net -W: http://outflux.net/ -P: 1024D/17063E6D 9FA3 C49C 23C9 D1BC 2E30 1975 1FFF 4BA9 1706 3E6D -D: Minor updates to SCSI types, added /proc/pid/maps protection +E: kees@ubuntu.com +E: keescook@chromium.org +W: http://outflux.net/blog/ +P: 4096R/DC6DC026 A5C3 F68F 229D D60F 723E 6E13 8972 F4DF DC6D C026 +D: Various security things, bug fixes, and documentation. S: (ask for current address) +S: Portland, Oregon S: USA N: Robin Cornelius From 2dbcd05f1e9e0932833d16dab1696176fc164b07 Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Thu, 8 Dec 2011 14:34:02 -0800 Subject: [PATCH 342/364] drivers/rtc/rtc-s3c.c: fix driver clock enable/disable balance issues If an error occurs after the clock is enabled, the enable/disable state can become unbalanced. Signed-off-by: Jonghwan Choi Cc: Alessandro Zummo Acked-by: Kukjin Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-s3c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 7639ab906f02..5b979d9cc332 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -202,7 +202,6 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm) void __iomem *base = s3c_rtc_base; int year = tm->tm_year - 100; - clk_enable(rtc_clk); pr_debug("set time %04d.%02d.%02d %02d:%02d:%02d\n", 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); @@ -214,6 +213,7 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm) return -EINVAL; } + clk_enable(rtc_clk); writeb(bin2bcd(tm->tm_sec), base + S3C2410_RTCSEC); writeb(bin2bcd(tm->tm_min), base + S3C2410_RTCMIN); writeb(bin2bcd(tm->tm_hour), base + S3C2410_RTCHOUR); From c193c82f054195aa352ccbef91afc28446e5a30e Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Thu, 8 Dec 2011 14:34:10 -0800 Subject: [PATCH 343/364] memcg: update maintainers More players joined to memory cgroup developments and Johannes' great work changed internal design of memory cgroup dramatically. And he will do more works. Michal Hokko did many bug fixes and know memory cgroup very well. Daisuke Nishimura helped us very much but he seems busy now. Thanks to his works. Signed-off-by: KAMEZAWA Hiroyuki Acked-by: Michal Hocko Acked-by: Johannes Weiner Acked-by: Daisuke Nishimura Cc: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index b4f18024f4e7..6751a36f569f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4302,8 +4302,9 @@ F: include/linux/mm.h F: mm/ MEMORY RESOURCE CONTROLLER +M: Johannes Weiner +M: Michal Hocko M: Balbir Singh -M: Daisuke Nishimura M: KAMEZAWA Hiroyuki L: cgroups@vger.kernel.org L: linux-mm@kvack.org From 09dc3cf93f7d16fdd37a0ad8486faebb5e2769ec Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 8 Dec 2011 14:34:13 -0800 Subject: [PATCH 344/364] printk: avoid double lock acquire Commit 4f2a8d3cf5e ("printk: Fix console_sem vs logbuf_lock unlock race") introduced another silly bug where we would want to acquire an already held lock. Avoid this. Reported-by: Andrea Arcangeli Signed-off-by: Peter Zijlstra Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/printk.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/printk.c b/kernel/printk.c index 1455a0d4eedd..7982a0a841ea 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1293,10 +1293,11 @@ again: raw_spin_lock(&logbuf_lock); if (con_start != log_end) retry = 1; + raw_spin_unlock_irqrestore(&logbuf_lock, flags); + if (retry && console_trylock()) goto again; - raw_spin_unlock_irqrestore(&logbuf_lock, flags); if (wake_klogd) wake_up_klogd(); } From b6999b19120931ede364fa3b685e698a61fed31d Mon Sep 17 00:00:00 2001 From: Youquan Song Date: Thu, 8 Dec 2011 14:34:16 -0800 Subject: [PATCH 345/364] thp: add compound tail page _mapcount when mapped With the 3.2-rc kernel, IOMMU 2M pages in KVM works. But when I tried to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page failed to be used. The root cause is that 1GB page allocation calls gup_huge_pud() while 2M page calls gup_huge_pmd. If compound pages are used and the page is a tail page, gup_huge_pmd() increases _mapcount to record tail page are mapped while gup_huge_pud does not do that. So when the mapped page is relesed, it will result in kernel oops because the page is not marked mapped. This patch add tail process for compound page in 1GB huge page which keeps the same process as 2M page. Reproduce like: 1. Add grub boot option: hugepagesz=1G hugepages=8 2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages 3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages -net none -device pci-assign,host=07:00.1 kernel BUG at mm/swap.c:114! invalid opcode: 0000 [#1] SMP Call Trace: put_page+0x15/0x37 kvm_release_pfn_clean+0x31/0x36 kvm_iommu_put_pages+0x94/0xb1 kvm_iommu_unmap_memslots+0x80/0xb6 kvm_assign_device+0xba/0x117 kvm_vm_ioctl_assigned_device+0x301/0xa47 kvm_vm_ioctl+0x36c/0x3a2 do_vfs_ioctl+0x49e/0x4e4 sys_ioctl+0x5a/0x7c system_call_fastpath+0x16/0x1b RIP put_compound_page+0xd4/0x168 Signed-off-by: Youquan Song Reviewed-by: Andrea Arcangeli Cc: Andi Kleen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/gup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index ea305856151c..dd74e46828c0 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -201,6 +201,8 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr, do { VM_BUG_ON(compound_head(page) != head); pages[*nr] = page; + if (PageTail(page)) + get_huge_page_tail(page); (*nr)++; page++; refs++; From 58a84aa92723d1ac3e1cc4e3b0ff49291663f7e1 Mon Sep 17 00:00:00 2001 From: Youquan Song Date: Thu, 8 Dec 2011 14:34:18 -0800 Subject: [PATCH 346/364] thp: set compound tail page _count to zero Commit 70b50f94f1644 ("mm: thp: tail page refcounting fix") keeps all page_tail->_count zero at all times. But the current kernel does not set page_tail->_count to zero if a 1GB page is utilized. So when an IOMMU 1GB page is used by KVM, it wil result in a kernel oops because a tail page's _count does not equal zero. kernel BUG at include/linux/mm.h:386! invalid opcode: 0000 [#1] SMP Call Trace: gup_pud_range+0xb8/0x19d get_user_pages_fast+0xcb/0x192 ? trace_hardirqs_off+0xd/0xf hva_to_pfn+0x119/0x2f2 gfn_to_pfn_memslot+0x2c/0x2e kvm_iommu_map_pages+0xfd/0x1c1 kvm_iommu_map_memslots+0x7c/0xbd kvm_iommu_map_guest+0xaa/0xbf kvm_vm_ioctl_assigned_device+0x2ef/0xa47 kvm_vm_ioctl+0x36c/0x3a2 do_vfs_ioctl+0x49e/0x4e4 sys_ioctl+0x5a/0x7c system_call_fastpath+0x16/0x1b RIP gup_huge_pud+0xf2/0x159 Signed-off-by: Youquan Song Reviewed-by: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 1 + mm/page_alloc.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index bb28a5f9db8d..73f17c0293c0 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -576,6 +576,7 @@ static void prep_compound_gigantic_page(struct page *page, unsigned long order) __SetPageHead(page); for (i = 1; i < nr_pages; i++, p = mem_map_next(p, page, i)) { __SetPageTail(p); + set_page_count(p, 0); p->first_page = page; } } diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 9dd443d89d8b..850009a7101e 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -356,8 +356,8 @@ void prep_compound_page(struct page *page, unsigned long order) __SetPageHead(page); for (i = 1; i < nr_pages; i++) { struct page *p = page + i; - __SetPageTail(p); + set_page_count(p, 0); p->first_page = page; } } From 09761333ed47e899cc1482c13090b95f3f711971 Mon Sep 17 00:00:00 2001 From: Hillf Danton Date: Thu, 8 Dec 2011 14:34:20 -0800 Subject: [PATCH 347/364] mm/migrate.c: pair unlock_page() and lock_page() when migrating huge pages Avoid unlocking and unlocked page if we failed to lock it. Signed-off-by: Hillf Danton Cc: Naoya Horiguchi Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/migrate.c b/mm/migrate.c index 578e29174fa6..177aca424a06 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -871,9 +871,9 @@ static int unmap_and_move_huge_page(new_page_t get_new_page, if (anon_vma) put_anon_vma(anon_vma); -out: unlock_page(hpage); +out: if (rc != -EAGAIN) { list_del(&hpage->lru); put_page(hpage); From d021563888312018ca65681096f62e36c20e63cc Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Thu, 8 Dec 2011 14:34:27 -0800 Subject: [PATCH 348/364] mm: Ensure that pfn_valid() is called once per pageblock when reserving pageblocks setup_zone_migrate_reserve() expects that zone->start_pfn starts at pageblock_nr_pages aligned pfn otherwise we could access beyond an existing memblock resulting in the following panic if CONFIG_HOLES_IN_ZONE is not configured and we do not check pfn_valid: IP: [] setup_zone_migrate_reserve+0xcd/0x180 *pdpt = 0000000000000000 *pde = f000ff53f000ff53 Oops: 0000 [#1] SMP Pid: 1, comm: swapper Not tainted 3.0.7-0.7-pae #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform EIP: 0060:[] EFLAGS: 00010006 CPU: 0 EIP is at setup_zone_migrate_reserve+0xcd/0x180 EAX: 000c0000 EBX: f5801fc0 ECX: 000c0000 EDX: 00000000 ESI: 000c01fe EDI: 000c01fe EBP: 00140000 ESP: f2475f58 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=f2474000 task=f2472cd0 task.ti=f2474000) Call Trace: [] __setup_per_zone_wmarks+0xec/0x160 [] setup_per_zone_wmarks+0xf/0x20 [] init_per_zone_wmark_min+0x27/0x86 [] do_one_initcall+0x2b/0x160 [] kernel_init+0xbe/0x157 [] kernel_thread_helper+0x6/0xd Code: a5 39 f5 89 f7 0f 46 fd 39 cf 76 40 8b 03 f6 c4 08 74 32 eb 91 90 89 c8 c1 e8 0e 0f be 80 80 2f 86 c0 8b 14 85 60 2f 86 c0 89 c8 <2b> 82 b4 12 00 00 c1 e0 05 03 82 ac 12 00 00 8b 00 f6 c4 08 0f EIP: [] setup_zone_migrate_reserve+0xcd/0x180 SS:ESP 0068:f2475f58 CR2: 00000000000012b4 We crashed in pageblock_is_reserved() when accessing pfn 0xc0000 because highstart_pfn = 0x36ffe. The issue was introduced in 3.0-rc1 by 6d3163ce ("mm: check if any page in a pageblock is reserved before marking it MIGRATE_RESERVE"). Make sure that start_pfn is always aligned to pageblock_nr_pages to ensure that pfn_valid s always called at the start of each pageblock. Architectures with holes in pageblocks will be correctly handled by pfn_valid_within in pageblock_is_reserved. Signed-off-by: Michal Hocko Signed-off-by: Mel Gorman Tested-by: Dang Bo Reviewed-by: KAMEZAWA Hiroyuki Cc: Andrea Arcangeli Cc: David Rientjes Cc: Arve Hjnnevg Cc: KOSAKI Motohiro Cc: John Stultz Cc: Dave Hansen Cc: [3.0+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 850009a7101e..2b8ba3aebf6e 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3377,9 +3377,15 @@ static void setup_zone_migrate_reserve(struct zone *zone) unsigned long block_migratetype; int reserve; - /* Get the start pfn, end pfn and the number of blocks to reserve */ + /* + * Get the start pfn, end pfn and the number of blocks to reserve + * We have to be careful to be aligned to pageblock_nr_pages to + * make sure that we always check pfn_valid for the first page in + * the block. + */ start_pfn = zone->zone_start_pfn; end_pfn = start_pfn + zone->spanned_pages; + start_pfn = roundup(start_pfn, pageblock_nr_pages); reserve = roundup(min_wmark_pages(zone), pageblock_nr_pages) >> pageblock_order; From 1368edf0647ac112d8cfa6ce47257dc950c50f5c Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 8 Dec 2011 14:34:30 -0800 Subject: [PATCH 349/364] mm: vmalloc: check for page allocation failure before vmlist insertion Commit f5252e00 ("mm: avoid null pointer access in vm_struct via /proc/vmallocinfo") adds newly allocated vm_structs to the vmlist after it is fully initialised. Unfortunately, it did not check that __vmalloc_area_node() successfully populated the area. In the event of allocation failure, the vmalloc area is freed but the pointer to freed memory is inserted into the vmlist leading to a a crash later in get_vmalloc_info(). This patch adds a check for ____vmalloc_area_node() failure within __vmalloc_node_range. It does not use "goto fail" as in the previous error path as a warning was already displayed by __vmalloc_area_node() before it called vfree in its failure path. Credit goes to Luciano Chavez for doing all the real work of identifying exactly where the problem was. Signed-off-by: Mel Gorman Reported-by: Luciano Chavez Tested-by: Luciano Chavez Reviewed-by: Rik van Riel Acked-by: David Rientjes Cc: [3.1.x+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 3231bf332878..1d8b32f07139 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1633,6 +1633,8 @@ void *__vmalloc_node_range(unsigned long size, unsigned long align, goto fail; addr = __vmalloc_area_node(area, gfp_mask, prot, node, caller); + if (!addr) + return NULL; /* * In this function, newly allocated vm_struct is not added From 2a95ea6c0d129b4568fb64e1deda16ceb20e6636 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Thu, 8 Dec 2011 14:34:32 -0800 Subject: [PATCH 350/364] procfs: do not overflow get_{idle,iowait}_time for nohz Since commit a25cac5198d4 ("proc: Consider NO_HZ when printing idle and iowait times") we are reporting idle/io_wait time also while a CPU is tickless. We rely on get_{idle,iowait}_time functions to retrieve proper data. These functions, however, use usecs_to_cputime to translate micro seconds time to cputime64_t. This is just an alias to usecs_to_jiffies which reduces the data type from u64 to unsigned int and also checks whether the given parameter overflows jiffies_to_usecs(MAX_JIFFY_OFFSET) and returns MAX_JIFFY_OFFSET in that case. When we overflow depends on CONFIG_HZ but especially for CONFIG_HZ_300 it is quite low (1431649781) so we are getting MAX_JIFFY_OFFSET for >3000s! until we overflow unsigned int. Just for reference CONFIG_HZ_100 has an overflow window around 20s, CONFIG_HZ_250 ~8s and CONFIG_HZ_1000 ~2s. This results in a bug when people saw [h]top going mad reporting 100% CPU usage even though there was basically no CPU load. The reason was simply that /proc/stat stopped reporting idle/io_wait changes (and reported MAX_JIFFY_OFFSET) and so the only change happening was for user system time. Let's use nsecs_to_jiffies64 instead which doesn't reduce the precision to 32b type and it is much more appropriate for cumulative time values (unlike usecs_to_jiffies which intended for timeout calculations). Signed-off-by: Michal Hocko Tested-by: Artem S. Tashkinov Cc: Dave Jones Cc: Arnd Bergmann Cc: Alexey Dobriyan Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/stat.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/proc/stat.c b/fs/proc/stat.c index 42b274da92c3..2a30d67dd6b8 100644 --- a/fs/proc/stat.c +++ b/fs/proc/stat.c @@ -32,7 +32,7 @@ static cputime64_t get_idle_time(int cpu) idle = kstat_cpu(cpu).cpustat.idle; idle = cputime64_add(idle, arch_idle_time(cpu)); } else - idle = usecs_to_cputime(idle_time); + idle = nsecs_to_jiffies64(1000 * idle_time); return idle; } @@ -46,7 +46,7 @@ static cputime64_t get_iowait_time(int cpu) /* !NO_HZ so we can rely on cpustat.iowait */ iowait = kstat_cpu(cpu).cpustat.iowait; else - iowait = usecs_to_cputime(iowait_time); + iowait = nsecs_to_jiffies64(1000 * iowait_time); return iowait; } From ceb96398127f3388cb5815b2ab550196e2be5d68 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Dec 2011 14:34:35 -0800 Subject: [PATCH 351/364] rapidio/tsi721: switch to dma_zalloc_coherent Replace the pair dma_alloc_coherent()+memset() with the new dma_zalloc_coherent() added by Andrew Morton for kernel version 3.2 Signed-off-by: Alexandre Bounine Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 5225930a10cd..514c28c81420 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -851,14 +851,12 @@ static int tsi721_doorbell_init(struct tsi721_device *priv) INIT_WORK(&priv->idb_work, tsi721_db_dpc); /* Allocate buffer for inbound doorbells queue */ - priv->idb_base = dma_alloc_coherent(&priv->pdev->dev, + priv->idb_base = dma_zalloc_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, &priv->idb_dma, GFP_KERNEL); if (!priv->idb_base) return -ENOMEM; - memset(priv->idb_base, 0, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE); - dev_dbg(&priv->pdev->dev, "Allocated IDB buffer @ %p (phys = %llx)\n", priv->idb_base, (unsigned long long)priv->idb_dma); @@ -904,7 +902,7 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) */ /* Allocate space for DMA descriptors */ - bd_ptr = dma_alloc_coherent(&priv->pdev->dev, + bd_ptr = dma_zalloc_coherent(&priv->pdev->dev, bd_num * sizeof(struct tsi721_dma_desc), &bd_phys, GFP_KERNEL); if (!bd_ptr) @@ -913,8 +911,6 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) priv->bdma[chnum].bd_phys = bd_phys; priv->bdma[chnum].bd_base = bd_ptr; - memset(bd_ptr, 0, bd_num * sizeof(struct tsi721_dma_desc)); - dev_dbg(&priv->pdev->dev, "DMA descriptors @ %p (phys = %llx)\n", bd_ptr, (unsigned long long)bd_phys); @@ -922,7 +918,7 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ? bd_num : TSI721_DMA_MINSTSSZ; sts_size = roundup_pow_of_two(sts_size); - sts_ptr = dma_alloc_coherent(&priv->pdev->dev, + sts_ptr = dma_zalloc_coherent(&priv->pdev->dev, sts_size * sizeof(struct tsi721_dma_sts), &sts_phys, GFP_KERNEL); if (!sts_ptr) { @@ -938,8 +934,6 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) priv->bdma[chnum].sts_base = sts_ptr; priv->bdma[chnum].sts_size = sts_size; - memset(sts_ptr, 0, sts_size); - dev_dbg(&priv->pdev->dev, "desc status FIFO @ %p (phys = %llx) size=0x%x\n", sts_ptr, (unsigned long long)sts_phys, sts_size); @@ -1400,7 +1394,7 @@ static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, /* Outbound message descriptor status FIFO allocation */ priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1); - priv->omsg_ring[mbox].sts_base = dma_alloc_coherent(&priv->pdev->dev, + priv->omsg_ring[mbox].sts_base = dma_zalloc_coherent(&priv->pdev->dev, priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL); @@ -1412,9 +1406,6 @@ static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, goto out_desc; } - memset(priv->omsg_ring[mbox].sts_base, 0, - entries * sizeof(struct tsi721_dma_sts)); - /* * Configure Outbound Messaging Engine */ From b439e66f04bff6476c5d4bae6a52ab93fbb9a8f4 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Dec 2011 14:34:36 -0800 Subject: [PATCH 352/364] rapidio/tsi721: fix mailbox resource reporting Bug fix for Tsi721 RapidIO mport driver: Tsi721 supports four RapidIO mailboxes (MBOX0 - MBOX3) as defined by RapidIO specification. Mailbox resources has to be properly reported to allow use of all available mailboxes (initial version reports only MBOX0). This patch is applicable to kernel versions staring from 3.2-rc1. Signed-off-by: Alexandre Bounine Cc: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 514c28c81420..83ac8728b781 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -2107,8 +2107,8 @@ static int __devinit tsi721_setup_mport(struct tsi721_device *priv) INIT_LIST_HEAD(&mport->dbells); rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); - rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0); - rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); + rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3); + rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3); strcpy(mport->name, "Tsi721 mport"); /* Hook up interrupt handler */ From 1cee22b7f385b6c4f716846203a96e1f302132aa Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Dec 2011 14:34:42 -0800 Subject: [PATCH 353/364] rapidio/tsi721: modify PCIe capability settings Modify initialization of PCIe capability registers in Tsi721 mport driver: - change Completion Timeout value to avoid unexpected data transfer aborts during intensive traffic. - replace hardcoded offset of PCIe capability block by making it use the common function. This patch is applicable to kernel versions starting from 3.2-rc1. Signed-off-by: Alexandre Bounine Cc: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 20 +++++++++++++++----- drivers/rapidio/devices/tsi721.h | 2 ++ 2 files changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 83ac8728b781..691b1ab1a3d0 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -2154,7 +2154,7 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct tsi721_device *priv; - int i; + int i, cap; int err; u32 regval; @@ -2262,10 +2262,20 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, dev_info(&pdev->dev, "Unable to set consistent DMA mask\n"); } - /* Clear "no snoop" and "relaxed ordering" bits. */ - pci_read_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, ®val); - regval &= ~(PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN); - pci_write_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, regval); + cap = pci_pcie_cap(pdev); + BUG_ON(cap == 0); + + /* Clear "no snoop" and "relaxed ordering" bits, use default MRRS. */ + pci_read_config_dword(pdev, cap + PCI_EXP_DEVCTL, ®val); + regval &= ~(PCI_EXP_DEVCTL_READRQ | PCI_EXP_DEVCTL_RELAX_EN | + PCI_EXP_DEVCTL_NOSNOOP_EN); + regval |= 0x2 << MAX_READ_REQUEST_SZ_SHIFT; + pci_write_config_dword(pdev, cap + PCI_EXP_DEVCTL, regval); + + /* Adjust PCIe completion timeout. */ + pci_read_config_dword(pdev, cap + PCI_EXP_DEVCTL2, ®val); + regval &= ~(0x0f); + pci_write_config_dword(pdev, cap + PCI_EXP_DEVCTL2, regval | 0x2); /* * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h index 58be4deb1402..822e54c394d5 100644 --- a/drivers/rapidio/devices/tsi721.h +++ b/drivers/rapidio/devices/tsi721.h @@ -72,6 +72,8 @@ #define TSI721_MSIXPBA_OFFSET 0x2a000 #define TSI721_PCIECFG_EPCTL 0x400 +#define MAX_READ_REQUEST_SZ_SHIFT 12 + /* * Event Management Registers */ From 031af165b1cd295ef04d2bfbcae9bc3cb9180735 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Thu, 8 Dec 2011 14:34:44 -0800 Subject: [PATCH 354/364] sys_getppid: add missing rcu_dereference In order to safely dereference current->real_parent inside an rcu_read_lock, we need an rcu_dereference. Signed-off-by: Mandeep Singh Baines Cc: Thomas Gleixner Cc: Pavel Emelyanov Cc: Oleg Nesterov Cc: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/timer.c b/kernel/timer.c index dbaa62422b13..9c3c62b0c4bc 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1368,7 +1368,7 @@ SYSCALL_DEFINE0(getppid) int pid; rcu_read_lock(); - pid = task_tgid_vnr(current->real_parent); + pid = task_tgid_vnr(rcu_dereference(current->real_parent)); rcu_read_unlock(); return pid; From dc47ce90c3a822cd7c9e9339fe4d5f61dcb26b50 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 9 Dec 2011 15:09:32 -0800 Subject: [PATCH 355/364] Linux 3.2-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 12aafc20efbd..d1ea73f74c2f 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Saber-toothed Squirrel # *DOCUMENTATION* From 0c8551e5fa3833c6080542da662394817fea4616 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 12 Dec 2011 10:38:26 +0200 Subject: [PATCH 356/364] ARM: OMAP: mcbsp: Fix possible memory corruption Commits 09d28d ("ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src") and 7bc0c4 ("ARM: OMAP: mcbsp: Start generalize signal muxing functions") incorrectly set two struct omap_mcbsp_platform_data fields after omap_device_build_ss and kfree calls. Fix this by moving these pdata assignments before those calls. Signed-off-by: Jarkko Nikula Reported-by: NeilBrown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mcbsp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 292eee3be15f..28fcb27005d2 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->reg_size = 4; pdata->has_ccr = true; } + pdata->set_clk_src = omap2_mcbsp_set_clk_src; + if (id == 1) + pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) @@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) name, oh->name); return PTR_ERR(pdev); } - pdata->set_clk_src = omap2_mcbsp_set_clk_src; - if (id == 1) - pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; omap_mcbsp_count++; return 0; } From e5fe29c7198a1f6616286dfc8602a69da165cb3f Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Thu, 8 Dec 2011 22:23:00 +0200 Subject: [PATCH 357/364] ARM: OMAP: rx51: fix USB Commit 10299e2e4e3ed3b16503d4e04edd48b33083f4e2 (ARM: RX-51: Enable isp1704 power on/off) added power management for isp1704. However, the transceiver should be powered on by default, otherwise USB doesn't work at all for networking during boot. All kernels after v3.0 are affected. Cc: stable@kernel.org Signed-off-by: Felipe Contreras Reviewed-by: Sebastian Reichel [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ba1aa07bdb29..c15c5c9c9085 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -193,7 +193,7 @@ static struct platform_device rx51_charger_device = { static void __init rx51_charger_init(void) { WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, - GPIOF_OUT_INIT_LOW, "isp1704_reset")); + GPIOF_OUT_INIT_HIGH, "isp1704_reset")); platform_device_register(&rx51_charger_device); } From 7c17c7701cf3c176dc245aeabecb3ae4b166618f Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Thu, 15 Dec 2011 22:38:36 -0700 Subject: [PATCH 358/364] ARM: OMAP: hwmod data: fix iva and mailbox hwmods for OMAP 3 Seems the commit 7e89098 was overly aggressive in adding iva and mailbox hwmods so now they are registered twice. ------------[ cut here ]------------ WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1959 omap_hwmod_register+0x104/0x12c() omap_hwmod: iva: _register returned -22 Modules linked in: [] (unwind_backtrace+0x0/0xec) from [] (warn_slowpath_common+0x4c/0x64) [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_fmt+0x2c/0x3c) [] (warn_slowpath_fmt+0x2c/0x3c) from [] (omap_hwmod_register+0x104/0x12c) [] (omap_hwmod_register+0x104/0x12c) from [] (omap3_init_early+0x1c/0x28) [] (omap3_init_early+0x1c/0x28) from [] (setup_arch+0x6b8/0x7a4) [] (setup_arch+0x6b8/0x7a4) from [] (start_kernel+0x6c/0x264) [] (start_kernel+0x6c/0x264) from [<80008040>] (0x80008040) ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------ WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1959 omap_hwmod_register+0x104/0x12c() omap_hwmod: mailbox: _register returned -22 Modules linked in: [] (unwind_backtrace+0x0/0xec) from [] (warn_slowpath_common+0x4c/0x64) [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_fmt+0x2c/0x3c) [] (warn_slowpath_fmt+0x2c/0x3c) from [] (omap_hwmod_register+0x104/0x12c) [] (omap_hwmod_register+0x104/0x12c) from [] (omap3_init_early+0x1c/0x28) [] (omap3_init_early+0x1c/0x28) from [] (setup_arch+0x6b8/0x7a4) [] (setup_arch+0x6b8/0x7a4) from [] (start_kernel+0x6c/0x264) [] (start_kernel+0x6c/0x264) from [<80008040>] (0x80008040) ---[ end trace 1b75b31a2719ed1d ]--- Signed-off-by: Felipe Contreras Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 7f8915ad5099..eef43e2e163e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3247,18 +3247,14 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { /* 3430ES1-only hwmods */ static __initdata struct omap_hwmod *omap3430es1_hwmods[] = { - &omap3xxx_iva_hwmod, &omap3430es1_dss_core_hwmod, - &omap3xxx_mailbox_hwmod, NULL }; /* 3430ES2+-only hwmods */ static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = { - &omap3xxx_iva_hwmod, &omap3xxx_dss_core_hwmod, &omap3xxx_usbhsotg_hwmod, - &omap3xxx_mailbox_hwmod, NULL }; From 91a36bdb3ada99ebf3a613a0dab2d741445ffd7f Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Thu, 15 Dec 2011 22:38:37 -0700 Subject: [PATCH 359/364] ARM: OMAP: hwmod data: fix the panic on Nokia RM-680 during boot Booting the Linux kernel on Nokia RM-680 board has been broken since 2.6.39 due to the following: [ 0.217193] omap_hwmod: timer12: enabling [ 0.221435] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa304010 [ 0.229431] Internal error: : 1028 [#1] SMP [ 0.233825] Modules linked in: [ 0.237060] CPU: 0 Not tainted (3.2.0-rc4-dirty #46) [ 0.242645] PC is at _update_sysc_cache+0x2c/0x7c [ 0.247589] LR is at _enable+0x1b0/0x2d8 [ 0.251708] pc : [] lr : [] psr: 40000013 [ 0.251708] sp : ef831f40 ip : ef82f380 fp : c06ac0c0 [ 0.263702] r10: 00000000 r9 : c05dfb2c r8 : ef830000 [ 0.269165] r7 : c0027494 r6 : 00000000 r5 : 00000000 r4 : c06608b0 [ 0.276000] r3 : fa304000 r2 : 00000010 r1 : c0661e28 r0 : c06608b0 [ 0.282806] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 0.290405] Control: 10c5387d Table: 80004019 DAC: 00000017 [ 0.296417] Process swapper (pid: 1, stack limit = 0xef8302f8) [ 0.302520] Stack: (0xef831f40 to 0xef832000) [ 0.307098] 1f40: c06608b0 c0026df4 c06ad094 c0035120 00000001 c06608b0 00000000 c0027530 [ 0.315612] 1f60: c0027604 ef830000 c05dfb2c c06608b0 c0642ac0 c0025bf0 c0621234 c062120c [ 0.324127] 1f80: c0621738 00000013 ef830000 c05dfb6c c0621234 c0008688 c062c880 c009eadc [ 0.332641] 1fa0: 0000005f 00000000 c0621738 35390013 00000000 00000000 00000000 0000019a [ 0.341156] 1fc0: c0681cf4 c0621234 c062120c c0621738 00000013 00000000 00000000 00000000 [ 0.349670] 1fe0: 00000000 c05d5298 00000000 c05d5200 c0014fa8 c0014fa8 ffff0000 ffff0000 [ 0.358184] [] (_update_sysc_cache+0x2c/0x7c) from [] (_enable+0x1b0/0x2d8) [ 0.367248] [] (_enable+0x1b0/0x2d8) from [] (_setup+0x9c/0x170) [ 0.375335] [] (_setup+0x9c/0x170) from [] (omap_hwmod_for_each+0x38/0x58) [ 0.384307] [] (omap_hwmod_for_each+0x38/0x58) from [] (omap_hwmod_setup_all+0x40/0xa0) [ 0.394409] [] (omap_hwmod_setup_all+0x40/0xa0) from [] (do_one_initcall+0x34/0x180) [ 0.404296] [] (do_one_initcall+0x34/0x180) from [] (kernel_init+0x98/0x144) [ 0.413452] [] (kernel_init+0x98/0x144) from [] (kernel_thread_exit+0x0/0x8) [ 0.422576] Code: e3130c01 1590304c 0590304c 119320b2 (07932002) [ 0.429046] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.433959] Kernel panic - not syncing: Attempted to kill init! Timer 12 is not necessarily available on non-GP devices (see e.g. http://marc.info/?l=linux-omap&m=129433066521102&w=2), so it should be registered only on GP OMAPs. With this change it's again possible to boot RM-680 into the shell. Tested with 3.2-rc4. Signed-off-by: Aaro Koskinen [paul@pwsan.com: changed subject line] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index eef43e2e163e..126cb49c0de7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3198,7 +3198,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_timer9_hwmod, &omap3xxx_timer10_hwmod, &omap3xxx_timer11_hwmod, - &omap3xxx_timer12_hwmod, &omap3xxx_wd_timer2_hwmod, &omap3xxx_uart1_hwmod, @@ -3245,6 +3244,12 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { NULL, }; +/* GP-only hwmods */ +static __initdata struct omap_hwmod *omap3xxx_gp_hwmods[] = { + &omap3xxx_timer12_hwmod, + NULL +}; + /* 3430ES1-only hwmods */ static __initdata struct omap_hwmod *omap3430es1_hwmods[] = { &omap3430es1_dss_core_hwmod, @@ -3296,6 +3301,13 @@ int __init omap3xxx_hwmod_init(void) if (r < 0) return r; + /* Register GP-only hwmods. */ + if (omap_type() == OMAP2_DEVICE_TYPE_GP) { + r = omap_hwmod_register(omap3xxx_gp_hwmods); + if (r < 0) + return r; + } + rev = omap_rev(); /* From 4bf90f6573d04845917dc0ac38170746f84c533c Mon Sep 17 00:00:00 2001 From: Kyle Manna Date: Tue, 18 Oct 2011 13:47:41 -0500 Subject: [PATCH 360/364] ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 Add hwmod support to enable access to UART4 of the AM35xx series of chips. The UART4 device referenced from the TRM will show up as ttyO3. This was tested on an AM3505. Signed-off-by: Kyle Manna Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock3xxx_data.c | 11 +++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 52 ++++++++++++++++++++++ arch/arm/mach-omap2/prcm-common.h | 2 + arch/arm/plat-omap/include/plat/irqs.h | 2 +- arch/arm/plat-omap/include/plat/serial.h | 1 + 5 files changed, 67 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 5d0064a4fb5a..4e1b1a2f0537 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -2480,6 +2480,16 @@ static struct clk uart4_fck = { .recalc = &followparent_recalc, }; +static struct clk uart4_fck_am35xx = { + .name = "uart4_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_UART4_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk gpt2_fck = { .name = "gpt2_fck", .ops = &clkops_omap2_dflt_wait, @@ -3403,6 +3413,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX), CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX), CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX), + CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_3505 | CK_3517), CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX), CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX), CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 126cb49c0de7..3be90feca77c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -164,6 +164,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod; static struct omap_hwmod omap3xxx_uart2_hwmod; static struct omap_hwmod omap3xxx_uart3_hwmod; static struct omap_hwmod omap3xxx_uart4_hwmod; +static struct omap_hwmod am35xx_uart4_hwmod; static struct omap_hwmod omap3xxx_usbhsotg_hwmod; /* l3_core -> usbhsotg interface */ @@ -299,6 +300,23 @@ static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* AM35xx: L4 CORE -> UART4 interface */ +static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = { + { + .pa_start = OMAP3_UART4_AM35XX_BASE, + .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_uart4_hwmod, + .clk = "uart4_ick", + .addr = am35xx_uart4_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* L4 CORE -> I2C1 interface */ static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = { .master = &omap3xxx_l4_core_hwmod, @@ -1309,6 +1327,39 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = { .class = &omap2_uart_class, }; +static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = { + { .irq = INT_35XX_UART4_IRQ, }, +}; + +static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { + { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, }, + { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, }, +}; + +static struct omap_hwmod_ocp_if *am35xx_uart4_slaves[] = { + &am35xx_l4_core__uart4, +}; + +static struct omap_hwmod am35xx_uart4_hwmod = { + .name = "uart4", + .mpu_irqs = am35xx_uart4_mpu_irqs, + .sdma_reqs = am35xx_uart4_sdma_reqs, + .main_clk = "uart4_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_UART4_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT, + }, + }, + .slaves = am35xx_uart4_slaves, + .slaves_cnt = ARRAY_SIZE(am35xx_uart4_slaves), + .class = &omap2_uart_class, +}; + + static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, @@ -3287,6 +3338,7 @@ static __initdata struct omap_hwmod *omap36xx_hwmods[] = { static __initdata struct omap_hwmod *am35xx_hwmods[] = { &omap3xxx_dss_core_hwmod, /* XXX ??? */ &am35xx_usbhsotg_hwmod, + &am35xx_uart4_hwmod, NULL }; diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 0363dcb0ef93..da2d80f5fcbd 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -201,6 +201,8 @@ #define OMAP3430_EN_MMC2_SHIFT 25 #define OMAP3430_EN_MMC1_MASK (1 << 24) #define OMAP3430_EN_MMC1_SHIFT 24 +#define OMAP3430_EN_UART4_MASK (1 << 23) +#define OMAP3430_EN_UART4_SHIFT 23 #define OMAP3430_EN_MCSPI4_MASK (1 << 21) #define OMAP3430_EN_MCSPI4_SHIFT 21 #define OMAP3430_EN_MCSPI3_MASK (1 << 20) diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 30e10719b774..6e5d3a0cb9d5 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -357,7 +357,7 @@ #define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 #define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 #define INT_35XX_USBOTG_IRQ 71 -#define INT_35XX_UART4 84 +#define INT_35XX_UART4_IRQ 84 #define INT_35XX_CCDC_VD0_IRQ 88 #define INT_35XX_CCDC_VD1_IRQ 92 #define INT_35XX_CCDC_VD2_IRQ 93 diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 1ab9fd6abe6d..865a2ba7ffa8 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -44,6 +44,7 @@ #define OMAP3_UART2_BASE OMAP2_UART2_BASE #define OMAP3_UART3_BASE 0x49020000 #define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ +#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ /* OMAP4 serial ports */ #define OMAP4_UART1_BASE OMAP2_UART1_BASE From de231388cb80a8ef3e779bbfa0564ba0157b7377 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Thu, 15 Dec 2011 23:14:44 -0700 Subject: [PATCH 361/364] ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3 Following 2 hwmod structures are added 1. usb_host_hs The hwmod of usbhs with uhh, ehci and ohci base addresses functional clock and ehci, ohci irqs 2. usb_tll_hs hwmod of usbhs with the TLL base address and irq. Signed-off-by: Keshava Munegowda Reviewed-by: Partha Basak [paul@pwsan.com: fixed whitespace; removed nonexistent TLL->L3 interface; added master & slave for L4 CORE->TLL interface; skip registration on 3430ES1; fixed multiline comment style; updated to apply on Tony's cleanup branch; rebased] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 221 +++++++++++++++++++++ 1 file changed, 221 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 3be90feca77c..905fc44ae909 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -84,6 +84,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod; static struct omap_hwmod omap3xxx_mcbsp5_hwmod; static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod; static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod; +static struct omap_hwmod omap3xxx_usb_host_hs_hwmod; +static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod; /* L3 -> L4_CORE interface */ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { @@ -3228,6 +3230,218 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = { .class = &omap34xx_mmc_class, }; +/* + * 'usb_host_hs' class + * high-speed multi-port usb host controller + */ +static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = { + .master = &omap3xxx_usb_host_hs_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "core_l3_ick", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = { + .name = "usb_host_hs", + .sysc = &omap3xxx_usb_host_hs_sysc, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = { + &omap3xxx_usb_host_hs__l3_main_2, +}; + +static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = { + { + .name = "uhh", + .pa_start = 0x48064000, + .pa_end = 0x480643ff, + .flags = ADDR_TYPE_RT + }, + { + .name = "ohci", + .pa_start = 0x48064400, + .pa_end = 0x480647ff, + }, + { + .name = "ehci", + .pa_start = 0x48064800, + .pa_end = 0x48064cff, + }, + {} +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_usb_host_hs_hwmod, + .clk = "usbhost_ick", + .addr = omap3xxx_usb_host_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = { + &omap3xxx_l4_core__usb_host_hs, +}; + +static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = { + { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", }, +}; + +static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = { + { .name = "ohci-irq", .irq = 76 }, + { .name = "ehci-irq", .irq = 77 }, + { .irq = -1 } +}; + +static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { + .name = "usb_host_hs", + .class = &omap3xxx_usb_host_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .mpu_irqs = omap3xxx_usb_host_hs_irqs, + .main_clk = "usbhost_48m_fck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430ES2_USBHOST_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT, + .idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT, + }, + }, + .opt_clks = omap3xxx_usb_host_hs_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks), + .slaves = omap3xxx_usb_host_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_slaves), + .masters = omap3xxx_usb_host_hs_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_masters), + + /* + * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock + * id: i660 + * + * Description: + * In the following configuration : + * - USBHOST module is set to smart-idle mode + * - PRCM asserts idle_req to the USBHOST module ( This typically + * happens when the system is going to a low power mode : all ports + * have been suspended, the master part of the USBHOST module has + * entered the standby state, and SW has cut the functional clocks) + * - an USBHOST interrupt occurs before the module is able to answer + * idle_ack, typically a remote wakeup IRQ. + * Then the USB HOST module will enter a deadlock situation where it + * is no more accessible nor functional. + * + * Workaround: + * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE + */ + + /* + * Errata: USB host EHCI may stall when entering smart-standby mode + * Id: i571 + * + * Description: + * When the USBHOST module is set to smart-standby mode, and when it is + * ready to enter the standby state (i.e. all ports are suspended and + * all attached devices are in suspend mode), then it can wrongly assert + * the Mstandby signal too early while there are still some residual OCP + * transactions ongoing. If this condition occurs, the internal state + * machine may go to an undefined state and the USB link may be stuck + * upon the next resume. + * + * Workaround: + * Don't use smart standby; use only force standby, + * hence HWMOD_SWSUP_MSTANDBY + */ + + /* + * During system boot; If the hwmod framework resets the module + * the module will have smart idle settings; which can lead to deadlock + * (above Errata Id:i660); so, dont reset the module during boot; + * Use HWMOD_INIT_NO_RESET. + */ + + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | + HWMOD_INIT_NO_RESET, +}; + +/* + * 'usb_tll_hs' class + * usb_tll_hs module is the adapter on the usb_host_hs ports + */ +static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = { + .name = "usb_tll_hs", + .sysc = &omap3xxx_usb_tll_hs_sysc, +}; + +static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = { + { .name = "tll-irq", .irq = 78 }, + { .irq = -1 } +}; + +static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = { + { + .name = "tll", + .pa_start = 0x48062000, + .pa_end = 0x48062fff, + .flags = ADDR_TYPE_RT + }, + {} +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_usb_tll_hs_hwmod, + .clk = "usbtll_ick", + .addr = omap3xxx_usb_tll_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = { + &omap3xxx_l4_core__usb_tll_hs, +}; + +static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { + .name = "usb_tll_hs", + .class = &omap3xxx_usb_tll_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .mpu_irqs = omap3xxx_usb_tll_hs_irqs, + .main_clk = "usbtll_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 3, + .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .idlest_reg_id = 3, + .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT, + }, + }, + .slaves = omap3xxx_usb_tll_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves), +}; + static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, @@ -3254,6 +3468,7 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_uart1_hwmod, &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, + /* dss class */ &omap3xxx_dss_dispc_hwmod, &omap3xxx_dss_dsi1_hwmod, @@ -3311,6 +3526,8 @@ static __initdata struct omap_hwmod *omap3430es1_hwmods[] = { static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = { &omap3xxx_dss_core_hwmod, &omap3xxx_usbhsotg_hwmod, + &omap3xxx_usb_host_hs_hwmod, + &omap3xxx_usb_tll_hs_hwmod, NULL }; @@ -3332,6 +3549,8 @@ static __initdata struct omap_hwmod *omap36xx_hwmods[] = { &omap36xx_sr2_hwmod, &omap3xxx_usbhsotg_hwmod, &omap3xxx_mailbox_hwmod, + &omap3xxx_usb_host_hs_hwmod, + &omap3xxx_usb_tll_hs_hwmod, NULL }; @@ -3339,6 +3558,8 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = { &omap3xxx_dss_core_hwmod, /* XXX ??? */ &am35xx_usbhsotg_hwmod, &am35xx_uart4_hwmod, + &omap3xxx_usb_host_hs_hwmod, + &omap3xxx_usb_tll_hs_hwmod, NULL }; From af88fa9aa77c5623983c29cb219d6d746cafc852 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Thu, 15 Dec 2011 23:15:18 -0700 Subject: [PATCH 362/364] ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4 Following 2 hwmod structures are added 1. usb_host_hs The hwmod of usbhs with uhh, ehci and ohci base addresses functional clock and ehci, ohci irqs 2. usb_tll_hs hwmod of usbhs with the TLL base address and irq. Signed-off-by: Benoit Cousson [keshava_mgowda@ti.com: rebased to kernel version 3.0, added workarounds for hardware issues] Signed-off-by: Keshava Munegowda Reviewed-by: Partha Basak [paul@pwsan.com: fixed multi-line comments, fixed whitespace, fixed S-o-b notes, removed spurious TLL->L3 interface] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 208 ++++++++++++++++++++- 1 file changed, 207 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index daaf165af696..dcbf973c1603 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -70,6 +70,8 @@ static struct omap_hwmod omap44xx_mmc2_hwmod; static struct omap_hwmod omap44xx_mpu_hwmod; static struct omap_hwmod omap44xx_mpu_private_hwmod; static struct omap_hwmod omap44xx_usb_otg_hs_hwmod; +static struct omap_hwmod omap44xx_usb_host_hs_hwmod; +static struct omap_hwmod omap44xx_usb_tll_hs_hwmod; /* * Interconnects omap_hwmod structures @@ -5276,6 +5278,207 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves), }; +/* + * 'usb_host_hs' class + * high-speed multi-port usb host controller + */ +static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = { + .master = &omap44xx_usb_host_hs_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = { + .name = "usb_host_hs", + .sysc = &omap44xx_usb_host_hs_sysc, +}; + +static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = { + &omap44xx_usb_host_hs__l3_main_2, +}; + +static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = { + { + .name = "uhh", + .pa_start = 0x4a064000, + .pa_end = 0x4a0647ff, + .flags = ADDR_TYPE_RT + }, + { + .name = "ohci", + .pa_start = 0x4a064800, + .pa_end = 0x4a064bff, + }, + { + .name = "ehci", + .pa_start = 0x4a064c00, + .pa_end = 0x4a064fff, + }, + {} +}; + +static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = { + { .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START }, + { .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } +}; + +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_usb_host_hs_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_usb_host_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = { + &omap44xx_l4_cfg__usb_host_hs, +}; + +static struct omap_hwmod omap44xx_usb_host_hs_hwmod = { + .name = "usb_host_hs", + .class = &omap44xx_usb_host_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .main_clk = "usb_host_hs_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .mpu_irqs = omap44xx_usb_host_hs_irqs, + .slaves = omap44xx_usb_host_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_slaves), + .masters = omap44xx_usb_host_hs_masters, + .masters_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_masters), + + /* + * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock + * id: i660 + * + * Description: + * In the following configuration : + * - USBHOST module is set to smart-idle mode + * - PRCM asserts idle_req to the USBHOST module ( This typically + * happens when the system is going to a low power mode : all ports + * have been suspended, the master part of the USBHOST module has + * entered the standby state, and SW has cut the functional clocks) + * - an USBHOST interrupt occurs before the module is able to answer + * idle_ack, typically a remote wakeup IRQ. + * Then the USB HOST module will enter a deadlock situation where it + * is no more accessible nor functional. + * + * Workaround: + * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE + */ + + /* + * Errata: USB host EHCI may stall when entering smart-standby mode + * Id: i571 + * + * Description: + * When the USBHOST module is set to smart-standby mode, and when it is + * ready to enter the standby state (i.e. all ports are suspended and + * all attached devices are in suspend mode), then it can wrongly assert + * the Mstandby signal too early while there are still some residual OCP + * transactions ongoing. If this condition occurs, the internal state + * machine may go to an undefined state and the USB link may be stuck + * upon the next resume. + * + * Workaround: + * Don't use smart standby; use only force standby, + * hence HWMOD_SWSUP_MSTANDBY + */ + + /* + * During system boot; If the hwmod framework resets the module + * the module will have smart idle settings; which can lead to deadlock + * (above Errata Id:i660); so, dont reset the module during boot; + * Use HWMOD_INIT_NO_RESET. + */ + + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | + HWMOD_INIT_NO_RESET, +}; + +/* + * 'usb_tll_hs' class + * usb_tll_hs module is the adapter on the usb_host_hs ports + */ +static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = { + .name = "usb_tll_hs", + .sysc = &omap44xx_usb_tll_hs_sysc, +}; + +static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = { + { .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } +}; + +static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = { + { + .name = "tll", + .pa_start = 0x4a062000, + .pa_end = 0x4a063fff, + .flags = ADDR_TYPE_RT + }, + {} +}; + +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_usb_tll_hs_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_usb_tll_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = { + &omap44xx_l4_cfg__usb_tll_hs, +}; + +static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = { + .name = "usb_tll_hs", + .class = &omap44xx_usb_tll_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .main_clk = "usb_tll_hs_ick", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, + .mpu_irqs = omap44xx_usb_tll_hs_irqs, + .slaves = omap44xx_usb_tll_hs_slaves, + .slaves_cnt = ARRAY_SIZE(omap44xx_usb_tll_hs_slaves), +}; + static __initdata struct omap_hwmod *omap44xx_hwmods[] = { /* dmm class */ @@ -5415,13 +5618,16 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_uart3_hwmod, &omap44xx_uart4_hwmod, + /* usb host class */ + &omap44xx_usb_host_hs_hwmod, + &omap44xx_usb_tll_hs_hwmod, + /* usb_otg_hs class */ &omap44xx_usb_otg_hs_hwmod, /* wd_timer class */ &omap44xx_wd_timer2_hwmod, &omap44xx_wd_timer3_hwmod, - NULL, }; From a52e2ab66d4a9305e1ba64d9b9d25754b6c70895 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 15 Dec 2011 23:30:44 -0700 Subject: [PATCH 363/364] ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1 The HSMMC1/HSMMC2 host controllers on OMAP34xx and OMAP3503/3515/3525/3530 chips at ES levels prior to 3.0 can't do multiple block reads[1]. Mark the hwmod data appropriately. Reported by Dave Hylands and Steve Sakoman . Thanks to Steve Sakoman for further help testing this patch. 1. See for example Advisory 2.1.1.128 "MMC: Multiple Block Read Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ Revision F (October 2010) (SPRZ278F), available from http://focus.ti.com/lit/er/sprz278f/sprz278f.pdf Signed-off-by: Paul Walmsley Cc: Dave Hylands Cc: Steve Sakoman --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 94 +++++++++++++++++++++- 1 file changed, 90 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 905fc44ae909..27f2fad49160 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3125,7 +3125,35 @@ static struct omap_mmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; -static struct omap_hwmod omap3xxx_mmc1_hwmod = { +/* See 35xx errata 2.1.1.128 in SPRZ278F */ +static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = { + .flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT | + OMAP_HSMMC_BROKEN_MULTIBLOCK_READ), +}; + +static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = { + .name = "mmc1", + .mpu_irqs = omap34xx_mmc1_mpu_irqs, + .sdma_reqs = omap34xx_mmc1_sdma_reqs, + .opt_clks = omap34xx_mmc1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks), + .main_clk = "mmchs1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MMC1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT, + }, + }, + .dev_attr = &mmc1_pre_es3_dev_attr, + .slaves = omap3xxx_mmc1_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves), + .class = &omap34xx_mmc_class, +}; + +static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = { .name = "mmc1", .mpu_irqs = omap34xx_mmc1_mpu_irqs, .sdma_reqs = omap34xx_mmc1_sdma_reqs, @@ -3168,7 +3196,34 @@ static struct omap_hwmod_ocp_if *omap3xxx_mmc2_slaves[] = { &omap3xxx_l4_core__mmc2, }; -static struct omap_hwmod omap3xxx_mmc2_hwmod = { +/* See 35xx errata 2.1.1.128 in SPRZ278F */ +static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = { + .flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ, +}; + +static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = { + .name = "mmc2", + .mpu_irqs = omap34xx_mmc2_mpu_irqs, + .sdma_reqs = omap34xx_mmc2_sdma_reqs, + .opt_clks = omap34xx_mmc2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks), + .main_clk = "mmchs2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_EN_MMC2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT, + }, + }, + .dev_attr = &mmc2_pre_es3_dev_attr, + .slaves = omap3xxx_mmc2_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves), + .class = &omap34xx_mmc_class, +}; + +static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = { .name = "mmc2", .mpu_irqs = omap34xx_mmc2_mpu_irqs, .sdma_reqs = omap34xx_mmc2_sdma_reqs, @@ -3447,8 +3502,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l4_core_hwmod, &omap3xxx_l4_per_hwmod, &omap3xxx_l4_wkup_hwmod, - &omap3xxx_mmc1_hwmod, - &omap3xxx_mmc2_hwmod, &omap3xxx_mmc3_hwmod, &omap3xxx_mpu_hwmod, @@ -3531,6 +3584,20 @@ static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = { NULL }; +/* <= 3430ES3-only hwmods */ +static struct omap_hwmod *omap3430_pre_es3_hwmods[] __initdata = { + &omap3xxx_pre_es3_mmc1_hwmod, + &omap3xxx_pre_es3_mmc2_hwmod, + NULL +}; + +/* 3430ES3+-only hwmods */ +static struct omap_hwmod *omap3430_es3plus_hwmods[] __initdata = { + &omap3xxx_es3plus_mmc1_hwmod, + &omap3xxx_es3plus_mmc2_hwmod, + NULL +}; + /* 34xx-only hwmods (all ES revisions) */ static __initdata struct omap_hwmod *omap34xx_hwmods[] = { &omap3xxx_iva_hwmod, @@ -3551,6 +3618,8 @@ static __initdata struct omap_hwmod *omap36xx_hwmods[] = { &omap3xxx_mailbox_hwmod, &omap3xxx_usb_host_hs_hwmod, &omap3xxx_usb_tll_hs_hwmod, + &omap3xxx_es3plus_mmc1_hwmod, + &omap3xxx_es3plus_mmc2_hwmod, NULL }; @@ -3560,6 +3629,8 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = { &am35xx_uart4_hwmod, &omap3xxx_usb_host_hs_hwmod, &omap3xxx_usb_tll_hs_hwmod, + &omap3xxx_es3plus_mmc1_hwmod, + &omap3xxx_es3plus_mmc2_hwmod, NULL }; @@ -3619,6 +3690,21 @@ int __init omap3xxx_hwmod_init(void) h = omap3430es2plus_hwmods; }; + if (h) { + r = omap_hwmod_register(h); + if (r < 0) + return r; + } + + h = NULL; + if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 || + rev == OMAP3430_REV_ES2_1) { + h = omap3430_pre_es3_hwmods; + } else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || + rev == OMAP3430_REV_ES3_1_2) { + h = omap3430_es3plus_hwmods; + }; + if (h) r = omap_hwmod_register(h); From 3e47dc6a2ee54ea8b566729f75e9fdb5dfe078b6 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Tue, 13 Dec 2011 16:25:54 +0530 Subject: [PATCH 364/364] ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C For I2C clockactivity field is added for OMAP3 and OMAP4 that defines how the interface (OCP) and functional (system) clocks behave when the I2C module is idle. The configuration of the clock activity bit field (per TRM) is as follows: 0x0: Both clocks can be cut off 0x1: Only OCP clock must be kept active; system clock can be cut off 0x3: Both clocks must be kept active 0x2: Only system clock must be kept active; OCP clock can be cut off The patch makes 0x2(CLOCKACT_TEST_ICLK) the default for OMAP3 and OMAP4. Signed-off-by: Shubhrajyoti D Signed-off-by: Jon Hunter Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 7 ++++--- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 9 +++++---- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 27f2fad49160..5324e8d93bc0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1182,6 +1182,7 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = { SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -1689,7 +1690,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = { static struct omap_hwmod omap3xxx_i2c1_hwmod = { .name = "i2c1", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap2_i2c1_mpu_irqs, .sdma_reqs = omap2_i2c1_sdma_reqs, .main_clk = "i2c1_fck", @@ -1723,7 +1724,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = { static struct omap_hwmod omap3xxx_i2c2_hwmod = { .name = "i2c2", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap2_i2c2_mpu_irqs, .sdma_reqs = omap2_i2c2_sdma_reqs, .main_clk = "i2c2_fck", @@ -1768,7 +1769,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = { static struct omap_hwmod omap3xxx_i2c3_hwmod = { .name = "i2c3", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = i2c3_mpu_irqs, .sdma_reqs = i2c3_sdma_reqs, .main_clk = "i2c3_fck", diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index dcbf973c1603..f9f151081760 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2248,6 +2248,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = { SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -2302,7 +2303,7 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = { .name = "i2c1", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c1_irqs, .sdma_reqs = omap44xx_i2c1_sdma_reqs, .main_clk = "i2c1_fck", @@ -2358,7 +2359,7 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = { .name = "i2c2", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c2_irqs, .sdma_reqs = omap44xx_i2c2_sdma_reqs, .main_clk = "i2c2_fck", @@ -2414,7 +2415,7 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = { .name = "i2c3", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c3_irqs, .sdma_reqs = omap44xx_i2c3_sdma_reqs, .main_clk = "i2c3_fck", @@ -2470,7 +2471,7 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = { .name = "i2c4", .class = &omap44xx_i2c_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG, + .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c4_irqs, .sdma_reqs = omap44xx_i2c4_sdma_reqs, .main_clk = "i2c4_fck",