Merge patch series "can: sja1000: Prepare the use of a threaded handler"

Miquel Raynal provides a series for the sja1000 driver to work around
overrun stalls with a soft reset on Renesas SoCs.

Link: https://lore.kernel.org/all/20230616134553.2786391-1-miquel.raynal@bootlin.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This commit is contained in:
Marc Kleine-Budde 2023-06-22 09:42:17 +02:00
commit 0476980232
3 changed files with 39 additions and 7 deletions

View File

@ -387,6 +387,16 @@ static void sja1000_rx(struct net_device *dev)
netif_rx(skb);
}
static irqreturn_t sja1000_reset_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *)dev_id;
netdev_dbg(dev, "performing a soft reset upon overrun\n");
sja1000_start(dev);
return IRQ_HANDLED;
}
static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
{
struct sja1000_priv *priv = netdev_priv(dev);
@ -397,6 +407,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
enum can_state rx_state, tx_state;
unsigned int rxerr, txerr;
uint8_t ecc, alc;
int ret = 0;
skb = alloc_can_err_skb(dev, &cf);
if (skb == NULL)
@ -413,6 +424,15 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
stats->rx_over_errors++;
stats->rx_errors++;
sja1000_write_cmdreg(priv, CMD_CDO); /* clear bit */
/* Some controllers needs additional handling upon overrun
* condition: the controller may sometimes be totally confused
* and refuse any new frame while its buffer is empty. The only
* way to re-sync the read vs. write buffer offsets is to
* stop any current handling and perform a reset.
*/
if (priv->flags & SJA1000_QUIRK_RESET_ON_OVERRUN)
ret = IRQ_WAKE_THREAD;
}
if (isrc & IRQ_EI) {
@ -492,7 +512,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
netif_rx(skb);
return 0;
return ret;
}
irqreturn_t sja1000_interrupt(int irq, void *dev_id)
@ -501,7 +521,8 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
struct sja1000_priv *priv = netdev_priv(dev);
struct net_device_stats *stats = &dev->stats;
uint8_t isrc, status;
int n = 0;
irqreturn_t ret = 0;
int n = 0, err;
if (priv->pre_irq)
priv->pre_irq(priv);
@ -546,19 +567,25 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
}
if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {
/* error interrupt */
if (sja1000_err(dev, isrc, status))
err = sja1000_err(dev, isrc, status);
if (err == IRQ_WAKE_THREAD)
ret = err;
if (err)
break;
}
n++;
}
out:
if (!ret)
ret = (n) ? IRQ_HANDLED : IRQ_NONE;
if (priv->post_irq)
priv->post_irq(priv);
if (n >= SJA1000_MAX_IRQ)
netdev_dbg(dev, "%d messages handled in ISR", n);
return (n) ? IRQ_HANDLED : IRQ_NONE;
return ret;
}
EXPORT_SYMBOL_GPL(sja1000_interrupt);
@ -577,8 +604,9 @@ static int sja1000_open(struct net_device *dev)
/* register interrupt handler, if not done by the device driver */
if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) {
err = request_irq(dev->irq, sja1000_interrupt, priv->irq_flags,
dev->name, (void *)dev);
err = request_threaded_irq(dev->irq, sja1000_interrupt,
sja1000_reset_interrupt,
priv->irq_flags, dev->name, (void *)dev);
if (err) {
close_candev(dev);
return -EAGAIN;

View File

@ -147,6 +147,7 @@
*/
#define SJA1000_CUSTOM_IRQ_HANDLER BIT(0)
#define SJA1000_QUIRK_NO_CDR_REG BIT(1)
#define SJA1000_QUIRK_RESET_ON_OVERRUN BIT(2)
/*
* SJA1000 private data structure

View File

@ -106,7 +106,7 @@ static void sp_technologic_init(struct sja1000_priv *priv, struct device_node *o
static void sp_rzn1_init(struct sja1000_priv *priv, struct device_node *of)
{
priv->flags = SJA1000_QUIRK_NO_CDR_REG;
priv->flags = SJA1000_QUIRK_NO_CDR_REG | SJA1000_QUIRK_RESET_ON_OVERRUN;
}
static void sp_populate(struct sja1000_priv *priv,
@ -277,6 +277,9 @@ static int sp_probe(struct platform_device *pdev)
priv->irq_flags = IRQF_SHARED;
}
if (priv->flags & SJA1000_QUIRK_RESET_ON_OVERRUN)
priv->irq_flags |= IRQF_ONESHOT;
dev->irq = irq;
priv->reg_base = addr;