mvebu dt changes for v3.13 (round 2)

- kirkwood
     - use MBus DT binding for setting up the windows
     - move crypto and nand underneath the mbus node
     - ib62x0 has a u-boot env partition
 
  - mvebu
     - add the Armada XP matrix board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.20 (GNU/Linux)
 
 iQEcBAABAgAGBQJSVEKbAAoJEAi3KVZQDZAea2cH/0Vshr3Uift/HCY//dBHG91w
 OKT539uF4UqTe3B3BmIxGYYpemQMU37R346LPTYiiaTEOCqR90J2sYJKHB+6Yld5
 llyI00ulhv6vLVdbGjlLW376lemrilRmH+LRQJdz/UoG64xpJ2RkqATXAQFh1hKi
 wLq5heB4T8kfWW3JF52XXR1UTbqJdZyc81gFY9ShSzc78nhyqYJ3MtXN37Cqwqqq
 e3izWC9Ujms9maSshY6ENGbOp8vyRslUxcCEFSWChn61fgHVvOA/7zqMRAkts5Ag
 cqccsTVR9v2p09O8WvpgM4N9ULwB+qSIS13tVBzOVRGJ3xx+wc8NfBqF/cr3S4I=
 =b/Ew
 -----END PGP SIGNATURE-----

Merge tag 'dt-3.13-2' of git://git.infradead.org/linux-mvebu into next/dt

From Jason Cooper:
mvebu dt changes for v3.13 (round 2)

 - kirkwood
    - use MBus DT binding for setting up the windows
    - move crypto and nand underneath the mbus node
    - ib62x0 has a u-boot env partition

 - mvebu
    - add the Armada XP matrix board

* tag 'dt-3.13-2' of git://git.infradead.org/linux-mvebu:
  arm: mvebu: add support for the Armada XP Matrix board
  ARM: kirkwood: ib62x0: add u-boot environment partition
  ARM: kirkwood: Move the nand node under the mbus node
  ARM: kirkwood: Move the crypto node under the mbus node
  ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding

Signed-off-by: Kevin Hilman <khilman@linaro.org>
This commit is contained in:
Kevin Hilman 2013-10-09 14:11:03 -07:00
commit 0398436522
23 changed files with 517 additions and 437 deletions

View File

@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
armada-xp-gp.dtb \
armada-xp-matrix.dtb \
armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_ARCH_MXC) += \
imx25-karo-tx25.dtb \

View File

@ -0,0 +1,75 @@
/*
* Device Tree file for Marvell Armada XP Matrix board
*
* Copyright (C) 2013 Marvell
*
* Lior Amsalem <alior@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/dts-v1/;
#include "armada-xp-mv78460.dtsi"
/ {
model = "Marvell Armada XP Matrix Board";
compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
internal-regs {
serial@12000 {
clock-frequency = <250000000>;
status = "okay";
};
serial@12100 {
clock-frequency = <250000000>;
status = "okay";
};
serial@12200 {
clock-frequency = <250000000>;
status = "okay";
};
serial@12300 {
clock-frequency = <250000000>;
status = "okay";
};
sata@a0000 {
nr-ports = <2>;
status = "okay";
};
ethernet@30000 {
status = "okay";
phy-mode = "sgmii";
};
pcie-controller {
status = "okay";
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
};
usb@50000 {
status = "okay";
};
};
};
};

View File

@ -19,7 +19,6 @@
compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";

View File

@ -19,7 +19,6 @@
compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";

View File

@ -39,28 +39,6 @@
status = "ok";
};
nand@3000000 {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
chip-delay = <25>;
status = "okay";
partition@0 {
label = "uboot";
reg = <0x0 0x100000>;
};
partition@100000 {
label = "uImage";
reg = <0x100000 0x400000>;
};
partition@500000 {
label = "root";
reg = <0x500000 0x1fb00000>;
};
};
sata@80000 {
nr-ports = <2>;
status = "okay";
@ -80,6 +58,28 @@
};
};
&nand {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
chip-delay = <25>;
status = "okay";
partition@0 {
label = "uboot";
reg = <0x0 0x100000>;
};
partition@100000 {
label = "uImage";
reg = <0x100000 0x400000>;
};
partition@500000 {
label = "root";
reg = <0x500000 0x1fb00000>;
};
};
&mdio {
status = "okay";

View File

@ -148,44 +148,6 @@
status = "okay";
nr-ports = <2>;
};
nand@3000000 {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "okay";
chip-delay = <35>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x500000>;
};
partition@600000 {
label = "ramdisk";
reg = <0x0600000 0x500000>;
};
partition@b00000 {
label = "image";
reg = <0x0b00000 0x6600000>;
};
partition@7100000 {
label = "mini firmware";
reg = <0x7100000 0xa00000>;
};
partition@7b00000 {
label = "config";
reg = <0x7b00000 0x500000>;
};
};
};
regulators {
@ -220,6 +182,44 @@
};
};
&nand {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "okay";
chip-delay = <35>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x500000>;
};
partition@600000 {
label = "ramdisk";
reg = <0x0600000 0x500000>;
};
partition@b00000 {
label = "image";
reg = <0x0b00000 0x6600000>;
};
partition@7100000 {
label = "mini firmware";
reg = <0x7100000 0xa00000>;
};
partition@7b00000 {
label = "config";
reg = <0x7b00000 0x500000>;
};
};
&mdio {
status = "okay";

View File

@ -34,26 +34,6 @@
serial@12000 {
status = "ok";
};
nand@3000000 {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "data";
reg = <0x0500000 0xfb00000>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
@ -91,6 +71,26 @@
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "data";
reg = <0x0500000 0xfb00000>;
};
};
&mdio {
status = "okay";

View File

@ -67,31 +67,6 @@
status = "ok";
};
nand@3000000 {
chip-delay = <40>;
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "pogoplug";
reg = <0x0500000 0x2000000>;
};
partition@2500000 {
label = "root";
reg = <0x02500000 0xd800000>;
};
};
sata@80000 {
status = "okay";
nr-ports = <2>;
@ -171,6 +146,32 @@
};
};
&nand {
chip-delay = <40>;
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "pogoplug";
reg = <0x0500000 0x2000000>;
};
partition@2500000 {
label = "root";
reg = <0x02500000 0xd800000>;
};
};
&mdio {
status = "okay";

View File

@ -40,26 +40,6 @@
status = "ok";
};
nand@3000000 {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x00100000 0x00400000>;
};
partition@500000 {
label = "data";
reg = <0x00500000 0x1fb00000>;
};
};
sata@80000 {
status = "okay";
nr-ports = <1>;
@ -97,6 +77,26 @@
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x00100000 0x00400000>;
};
partition@500000 {
label = "data";
reg = <0x00500000 0x1fb00000>;
};
};
&mdio {
status = "okay";

View File

@ -5,7 +5,7 @@
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
@ -43,6 +43,7 @@
marvell,function = "gpio";
};
};
serial@12000 {
status = "okay";
};
@ -51,28 +52,6 @@
status = "okay";
nr-ports = <2>;
};
nand@3000000 {
status = "okay";
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x600000>;
};
partition@700000 {
label = "root";
reg = <0x0700000 0xf900000>;
};
};
};
gpio_keys {
@ -93,6 +72,7 @@
gpios = <&gpio0 28 1>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
@ -113,13 +93,39 @@
gpios = <&gpio0 27 0>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_power_off>;
pinctrl-names = "default";
gpios = <&gpio0 24 0>;
};
};
&nand {
status = "okay";
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
partition@0 {
label = "u-boot";
reg = <0x0000000 0xe0000>;
};
partition@e0000 {
label = "u-boot environment";
reg = <0xe0000 0x100000>;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x600000>;
};
partition@700000 {
label = "root";
reg = <0x0700000 0xf900000>;
};
};
@ -134,6 +140,7 @@
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};

View File

@ -19,7 +19,6 @@
};
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";
@ -83,35 +82,6 @@
serial@12000 {
status = "ok";
};
nand@3000000 {
status = "okay";
partition@0 {
label = "uboot";
reg = <0x0000000 0xc0000>;
};
partition@a0000 {
label = "env";
reg = <0xa0000 0x20000>;
};
partition@100000 {
label = "zImage";
reg = <0x100000 0x300000>;
};
partition@540000 {
label = "initrd";
reg = <0x540000 0x300000>;
};
partition@980000 {
label = "boot";
reg = <0x980000 0x1f400000>;
};
};
};
gpio-leds {
@ -180,6 +150,35 @@
};
};
&nand {
status = "okay";
partition@0 {
label = "uboot";
reg = <0x0000000 0xc0000>;
};
partition@a0000 {
label = "env";
reg = <0xa0000 0x20000>;
};
partition@100000 {
label = "zImage";
reg = <0x100000 0x300000>;
};
partition@540000 {
label = "initrd";
reg = <0x540000 0x300000>;
};
partition@980000 {
label = "boot";
reg = <0x980000 0x1f400000>;
};
};
&mdio {
status = "okay";

View File

@ -113,31 +113,6 @@
status = "ok";
};
nand@3000000 {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@a0000 {
label = "env";
reg = <0xa0000 0x20000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x100000 0x300000>;
};
partition@400000 {
label = "uInitrd";
reg = <0x540000 0x1000000>;
};
};
sata@80000 {
status = "okay";
nr-ports = <2>;
@ -195,6 +170,32 @@
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@a0000 {
label = "env";
reg = <0xa0000 0x20000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x100000 0x300000>;
};
partition@400000 {
label = "uInitrd";
reg = <0x540000 0x1000000>;
};
};
&mdio {
status = "okay";

View File

@ -34,13 +34,6 @@
serial@12000 {
status = "ok";
};
nand@3000000 {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "ok";
chip-delay = <25>;
};
};
i2c@0 {
@ -51,6 +44,13 @@
};
};
&nand {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "ok";
chip-delay = <25>;
};
&mdio {
status = "okay";

View File

@ -17,7 +17,6 @@
};
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";
@ -96,37 +95,6 @@
pinctrl-names = "default";
};
nand@3000000 {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "okay";
partition@0 {
label = "uboot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "fdt";
reg = <0x180000 0x80000>;
};
partition@200000 {
label = "kernel";
reg = <0x200000 0x400000>;
};
partition@600000 {
label = "rootfs";
reg = <0x600000 0x1fa00000>;
};
};
rtc@10300 {
status = "disabled";
};
@ -194,6 +162,37 @@
};
};
&nand {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "okay";
partition@0 {
label = "uboot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "fdt";
reg = <0x180000 0x80000>;
};
partition@200000 {
label = "kernel";
reg = <0x200000 0x400000>;
};
partition@600000 {
label = "rootfs";
reg = <0x600000 0x1fa00000>;
};
};
&mdio {
status = "okay";

View File

@ -17,7 +17,6 @@
};
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";
@ -98,36 +97,6 @@
status = "okay";
};
nand@3000000 {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>;
read-only;
};
partition@180000 {
label = "u-boot-env";
reg = <0x180000 0x20000>;
};
partition@200000 {
label = "uImage";
reg = <0x0200000 0x600000>;
};
partition@800000 {
label = "minirootfs";
reg = <0x0800000 0x1000000>;
};
partition@1800000 {
label = "jffs2";
reg = <0x1800000 0x6800000>;
};
};
sata@80000 {
status = "okay";
nr-ports = <2>;
@ -208,6 +177,36 @@
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>;
read-only;
};
partition@180000 {
label = "u-boot-env";
reg = <0x180000 0x20000>;
};
partition@200000 {
label = "uImage";
reg = <0x0200000 0x600000>;
};
partition@800000 {
label = "minirootfs";
reg = <0x0800000 0x1000000>;
};
partition@1800000 {
label = "jffs2";
reg = <0x1800000 0x6800000>;
};
};
&mdio {
status = "okay";

View File

@ -27,49 +27,6 @@
nr-ports = <2>;
};
nand@3000000 {
status = "okay";
chip-delay = <35>;
partition@0 {
label = "uboot";
reg = <0x0000000 0x0100000>;
read-only;
};
partition@100000 {
label = "uboot_env";
reg = <0x0100000 0x0080000>;
};
partition@180000 {
label = "key_store";
reg = <0x0180000 0x0080000>;
};
partition@200000 {
label = "info";
reg = <0x0200000 0x0080000>;
};
partition@280000 {
label = "etc";
reg = <0x0280000 0x0a00000>;
};
partition@c80000 {
label = "kernel_1";
reg = <0x0c80000 0x0a00000>;
};
partition@1680000 {
label = "rootfs1";
reg = <0x1680000 0x2fc0000>;
};
partition@4640000 {
label = "kernel_2";
reg = <0x4640000 0x0a00000>;
};
partition@5040000 {
label = "rootfs2";
reg = <0x5040000 0x2fc0000>;
};
};
pcie-controller {
status = "okay";
@ -105,3 +62,46 @@
};
};
};
&nand {
status = "okay";
chip-delay = <35>;
partition@0 {
label = "uboot";
reg = <0x0000000 0x0100000>;
read-only;
};
partition@100000 {
label = "uboot_env";
reg = <0x0100000 0x0080000>;
};
partition@180000 {
label = "key_store";
reg = <0x0180000 0x0080000>;
};
partition@200000 {
label = "info";
reg = <0x0200000 0x0080000>;
};
partition@280000 {
label = "etc";
reg = <0x0280000 0x0a00000>;
};
partition@c80000 {
label = "kernel_1";
reg = <0x0c80000 0x0a00000>;
};
partition@1680000 {
label = "rootfs1";
reg = <0x1680000 0x2fc0000>;
};
partition@4640000 {
label = "kernel_2";
reg = <0x4640000 0x0a00000>;
};
partition@5040000 {
label = "rootfs2";
reg = <0x5040000 0x2fc0000>;
};
};

View File

@ -15,7 +15,6 @@
};
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";

View File

@ -29,43 +29,6 @@
pinctrl-names = "default";
};
nand@3000000 {
chip-delay = <25>;
status = "okay";
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
partition@0 {
label = "uboot";
reg = <0x0 0x90000>;
};
partition@90000 {
label = "env";
reg = <0x90000 0x44000>;
};
partition@d4000 {
label = "test";
reg = <0xd4000 0x24000>;
};
partition@f4000 {
label = "conf";
reg = <0xf4000 0x400000>;
};
partition@4f4000 {
label = "linux";
reg = <0x4f4000 0x1d20000>;
};
partition@2214000 {
label = "user";
reg = <0x2214000 0x1dec000>;
};
};
sata@80000 {
nr-ports = <1>;
status = "okay";
@ -167,6 +130,43 @@
};
};
&nand {
chip-delay = <25>;
status = "okay";
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
partition@0 {
label = "uboot";
reg = <0x0 0x90000>;
};
partition@90000 {
label = "env";
reg = <0x90000 0x44000>;
};
partition@d4000 {
label = "test";
reg = <0xd4000 0x24000>;
};
partition@f4000 {
label = "conf";
reg = <0xf4000 0x400000>;
};
partition@4f4000 {
label = "linux";
reg = <0x4f4000 0x1d20000>;
};
partition@2214000 {
label = "user";
reg = <0x2214000 0x1dec000>;
};
};
&mdio {
status = "okay";

View File

@ -48,27 +48,6 @@
pinctrl-names = "default";
status = "okay";
};
nand@3000000 {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "root";
reg = <0x0500000 0x1fb00000>;
};
};
};
regulators {
@ -92,6 +71,27 @@
};
};
&nand {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "root";
reg = <0x0500000 0x1fb00000>;
};
};
&mdio {
status = "okay";

View File

@ -90,37 +90,6 @@
pinctrl-names = "default";
};
nand@3000000 {
status = "okay";
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>;
};
partition@180000 {
label = "u-boot env";
reg = <0x0180000 0x20000>;
};
partition@200000 {
label = "uImage";
reg = <0x0200000 0x600000>;
};
partition@800000 {
label = "uInitrd";
reg = <0x0800000 0x1000000>;
};
partition@1800000 {
label = "rootfs";
reg = <0x1800000 0xe800000>;
};
};
sata@80000 {
status = "okay";
nr-ports = <1>;
@ -204,6 +173,37 @@
};
};
&nand {
status = "okay";
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x180000>;
};
partition@180000 {
label = "u-boot env";
reg = <0x0180000 0x20000>;
};
partition@200000 {
label = "uImage";
reg = <0x0200000 0x600000>;
};
partition@800000 {
label = "uInitrd";
reg = <0x0800000 0x1000000>;
};
partition@1800000 {
label = "rootfs";
reg = <0x1800000 0xe800000>;
};
};
&mdio {
status = "okay";

View File

@ -6,7 +6,6 @@
/ {
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";

View File

@ -27,16 +27,43 @@
compatible = "marvell,kirkwood-mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
/* If a board file needs to change this ranges it must replace it completely */
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */
MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */
MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */
>;
controller = <&mbusc>;
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
crypto@0301 {
compatible = "marvell,orion-crypto";
reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
<MBUS_ID(0x03, 0x01) 0 0x800>;
reg-names = "regs", "sram";
interrupts = <22>;
clocks = <&gate_clk 17>;
status = "okay";
};
nand: nand@012f {
#address-cells = <1>;
#size-cells = <1>;
cle = <0>;
ale = <1>;
bank-width = <1>;
compatible = "marvell,orion-nand";
reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
chip-delay = <25>;
/* set partition map and/or chip-delay in board dts */
clocks = <&gate_clk 7>;
status = "disabled";
};
};
ocp@f1000000 {
compatible = "simple-bus";
ranges = <0x00000000 0xf1000000 0x0100000
0xf4000000 0xf4000000 0x0000400
0xf5000000 0xf5000000 0x0000400>;
ranges = <0x00000000 0xf1000000 0x0100000>;
#address-cells = <1>;
#size-cells = <1>;
@ -192,20 +219,6 @@
status = "okay";
};
nand@3000000 {
#address-cells = <1>;
#size-cells = <1>;
cle = <0>;
ale = <1>;
bank-width = <1>;
compatible = "marvell,orion-nand";
reg = <0xf4000000 0x400>;
chip-delay = <25>;
/* set partition map and/or chip-delay in board dts */
clocks = <&gate_clk 7>;
status = "disabled";
};
i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
@ -217,16 +230,6 @@
status = "disabled";
};
crypto@30000 {
compatible = "marvell,orion-crypto";
reg = <0x30000 0x10000>,
<0xf5000000 0x800>;
reg-names = "regs", "sram";
interrupts = <22>;
clocks = <&gate_clk 17>;
status = "okay";
};
mdio: mdio-bus@72004 {
compatible = "marvell,orion-mdio";
#address-cells = <1>;

View File

@ -92,7 +92,6 @@ static void __init kirkwood_dt_init(void)
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
BUG_ON(mvebu_mbus_dt_init());
kirkwood_setup_wins();
kirkwood_l2_init();