korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2025-01-20 04:44:26 +08:00
Code Issues Packages Projects Releases Wiki Activity

net: phy: allow scanning busses with missing phys

Browse Source 
Some MDIO busses will error out when trying to read a phy address with no
phy present at that address. In that case, probing the bus will fail
because __mdiobus_register() is scanning the bus for all possible phys
addresses.

In case MII_PHYSID1 returns -EIO or -ENODEV, consider there is no phy at
this address and set the phy ID to 0xffffffff which is then properly
handled in get_phy_device().

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Alexandre Belloni 2018-04-24 18:09:04 +02:00 committed by David S. Miller
parent 3be4aaf4e2
commit 02a6efcab6
1 changed files with 10 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/net/phy/phy_device.c
View File

@ -535,8 +535,17 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
/* Grab the bits from PHYIR1, and put them in the upper half */
phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
if (phy_reg < 0)
if (phy_reg < 0) {
/* if there is no device, return without an error so scanning
* the bus works properly
*/
if (phy_reg == -EIO || phy_reg == -ENODEV) {
*phy_id = 0xffffffff;
return 0;
}
return -EIO;
}
*phy_id = (phy_reg & 0xffff) << 16;