korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-11 21:38:32 +08:00
Code Issues Packages Projects Releases Wiki Activity

CUDA ADB fixes

Browse Source 
Fix the flakiness in the CUDA ADB driver on m68k macs (keypresses getting
wedged down or ADB just going AWOL altogether).

The only IRQ used by this driver is the VIA shift register IRQ. The PowerMac
conditional code disables the other VIA IRQ sources, so don't mess with the
other IRQ flags in the common code -- m68k macs need them.

When polling, don't disable local interrupts when we only need to disable the
CUDA interrupt.

Unless polling, don't clear the shift register IRQ flag. On m68k macs this
creates a race that often breaks CUDA ADB.

Tested on Quadra 840av and LC630 (both m68k); also Beige G3 (powerpc).

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Finn Thain 2007-05-01 22:33:00 +02:00 committed by Linus Torvalds
parent d95fd5fce8
commit 0251c38ce5
1 changed files with 32 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

58
drivers/macintosh/via-cuda.c
View File

@ -82,6 +82,7 @@ static unsigned char cuda_rbuf[16];
static unsigned char *reply_ptr;
static int reading_reply;
static int data_index;
static int cuda_irq;
#ifdef CONFIG_PPC
static struct device_node *vias;
#endif
@ -160,10 +161,8 @@ int __init find_via_cuda(void)
/* Clear and enable interrupts, but only on PPC. On 68K it's done */
/* for us by the main VIA driver in arch/m68k/mac/via.c */
#ifndef CONFIG_MAC
out_8(&via[IFR], 0x7f); /* clear interrupts by writing 1s */
out_8(&via[IER], IER_SET|SR_INT); /* enable interrupt from SR */
#endif
/* enable autopoll */
cuda_request(&req, NULL, 3, CUDA_PACKET, CUDA_AUTOPOLL, 1);
@ -181,24 +180,22 @@ int __init find_via_cuda(void)
static int __init via_cuda_start(void)
{
unsigned int irq;
if (via == NULL)
return -ENODEV;
#ifdef CONFIG_MAC
irq = IRQ_MAC_ADB;
cuda_irq = IRQ_MAC_ADB;
#else /* CONFIG_MAC */
irq = irq_of_parse_and_map(vias, 0);
if (irq == NO_IRQ) {
cuda_irq = irq_of_parse_and_map(vias, 0);
if (cuda_irq == NO_IRQ) {
printk(KERN_ERR "via-cuda: can't map interrupts for %s\n",
vias->full_name);
return -ENODEV;
}
#endif /* CONFIG_MAP */
#endif /* CONFIG_MAC */
if (request_irq(irq, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
printk(KERN_ERR "via-cuda: can't request irq %d\n", irq);
if (request_irq(cuda_irq, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
printk(KERN_ERR "via-cuda: can't request irq %d\n", cuda_irq);
return -EAGAIN;
}
@ -238,6 +235,7 @@ cuda_init(void)
printk(KERN_ERR "cuda_init_via() failed\n");
return -ENODEV;
}
out_8(&via[IER], IER_SET|SR_INT); /* enable interrupt from SR */
return via_cuda_start();
#endif
@ -263,15 +261,17 @@ cuda_init_via(void)
out_8(&via[B], in_8(&via[B]) | TACK | TIP); /* negate them */
out_8(&via[ACR] ,(in_8(&via[ACR]) & ~SR_CTRL) | SR_EXT); /* SR data in */
(void)in_8(&via[SR]); /* clear any left-over data */
#ifndef CONFIG_MAC
#ifdef CONFIG_PPC
out_8(&via[IER], 0x7f); /* disable interrupts from VIA */
(void)in_8(&via[IER]);
#else
out_8(&via[IER], SR_INT); /* disable SR interrupt from VIA */
#endif
/* delay 4ms and then clear any pending interrupt */
mdelay(4);
(void)in_8(&via[SR]);
out_8(&via[IFR], in_8(&via[IFR]) & 0x7f);
out_8(&via[IFR], SR_INT);
/* sync with the CUDA - assert TACK without TIP */
out_8(&via[B], in_8(&via[B]) & ~TACK);
@ -282,7 +282,7 @@ cuda_init_via(void)
/* wait for the interrupt and then clear it */
WAIT_FOR(in_8(&via[IFR]) & SR_INT, "CUDA response to sync (2)");
(void)in_8(&via[SR]);
out_8(&via[IFR], in_8(&via[IFR]) & 0x7f);
out_8(&via[IFR], SR_INT);
/* finish the sync by negating TACK */
out_8(&via[B], in_8(&via[B]) | TACK);
@ -291,7 +291,7 @@ cuda_init_via(void)
WAIT_FOR(in_8(&via[B]) & TREQ, "CUDA response to sync (3)");
WAIT_FOR(in_8(&via[IFR]) & SR_INT, "CUDA response to sync (4)");
(void)in_8(&via[SR]);
out_8(&via[IFR], in_8(&via[IFR]) & 0x7f);
out_8(&via[IFR], SR_INT);
out_8(&via[B], in_8(&via[B]) | TIP); /* should be unnecessary */
return 0;
@ -428,16 +428,12 @@ cuda_start(void)
void
cuda_poll(void)
{
unsigned long flags;
/* cuda_interrupt only takes a normal lock, we disable
* interrupts here to avoid re-entering and thus deadlocking.
* An option would be to disable only the IRQ source with
* disable_irq(), would that work on m68k ? --BenH
*/
local_irq_save(flags);
disable_irq(cuda_irq);
cuda_interrupt(0, NULL);
local_irq_restore(flags);
enable_irq(cuda_irq);
}
static irqreturn_t
@ -448,15 +444,25 @@ cuda_interrupt(int irq, void *arg)
unsigned char ibuf[16];
int ibuf_len = 0;
int complete = 0;
unsigned char virq;
spin_lock(&cuda_lock);
virq = in_8(&via[IFR]) & 0x7f;
out_8(&via[IFR], virq);
if ((virq & SR_INT) == 0) {
spin_unlock(&cuda_lock);
return IRQ_NONE;
/* On powermacs, this handler is registered for the VIA IRQ. But it uses
* just the shift register IRQ -- other VIA interrupt sources are disabled.
* On m68k macs, the VIA IRQ sources are dispatched individually. Unless
* we are polling, the shift register IRQ flag has already been cleared.
*/
#ifdef CONFIG_MAC
if (!arg)
#endif
{
if ((in_8(&via[IFR]) & SR_INT) == 0) {
spin_unlock(&cuda_lock);
return IRQ_NONE;
} else {
out_8(&via[IFR], SR_INT);
}
}
status = (~in_8(&via[B]) & (TIP|TREQ)) | (in_8(&via[ACR]) & SR_OUT);