Merge branch 'topic/drm-sync-audio-rate' into for-next

drivers/gpu/drm/i915/i915_dma.c

@@ -832,6 +832,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	mutex_init(&dev_priv->sb_lock);
 	mutex_init(&dev_priv->modeset_restore_lock);
 	mutex_init(&dev_priv->csr_lock);
+	mutex_init(&dev_priv->av_mutex);
 
 	intel_pm_setup(dev);
 

drivers/gpu/drm/i915/i915_drv.h

@@ -1885,6 +1885,11 @@ struct drm_i915_private {
 	/* hda/i915 audio component */
 	struct i915_audio_component *audio_component;
 	bool audio_component_registered;
+	/**
+	 * av_mutex - mutex for audio/video sync
+	 *
+	 */
+	struct mutex av_mutex;
 
 	uint32_t hw_context_size;
 	struct list_head context_list;

drivers/gpu/drm/i915/intel_audio.c

@@ -68,6 +68,31 @@ static const struct {
 	{ 148500, AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 },
 };
 
+/* HDMI N/CTS table */
+#define TMDS_297M 297000
+#define TMDS_296M DIV_ROUND_UP(297000 * 1000, 1001)
+static const struct {
+	int sample_rate;
+	int clock;
+	int n;
+	int cts;
+} aud_ncts[] = {
+	{ 44100, TMDS_296M, 4459, 234375 },
+	{ 44100, TMDS_297M, 4704, 247500 },
+	{ 48000, TMDS_296M, 5824, 281250 },
+	{ 48000, TMDS_297M, 5120, 247500 },
+	{ 32000, TMDS_296M, 5824, 421875 },
+	{ 32000, TMDS_297M, 3072, 222750 },
+	{ 88200, TMDS_296M, 8918, 234375 },
+	{ 88200, TMDS_297M, 9408, 247500 },
+	{ 96000, TMDS_296M, 11648, 281250 },
+	{ 96000, TMDS_297M, 10240, 247500 },
+	{ 176400, TMDS_296M, 17836, 234375 },
+	{ 176400, TMDS_297M, 18816, 247500 },
+	{ 192000, TMDS_296M, 23296, 281250 },
+	{ 192000, TMDS_297M, 20480, 247500 },
+};
+
 /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */
 static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode *mode)
 {
@@ -90,6 +115,45 @@ static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode *mode)
 	return hdmi_audio_clock[i].config;
 }
 
+static int audio_config_get_n(const struct drm_display_mode *mode, int rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {
+		if ((rate == aud_ncts[i].sample_rate) &&
+			(mode->clock == aud_ncts[i].clock)) {
+			return aud_ncts[i].n;
+		}
+	}
+	return 0;
+}
+
+static uint32_t audio_config_setup_n_reg(int n, uint32_t val)
+{
+	int n_low, n_up;
+	uint32_t tmp = val;
+
+	n_low = n & 0xfff;
+	n_up = (n >> 12) & 0xff;
+	tmp &= ~(AUD_CONFIG_UPPER_N_MASK | AUD_CONFIG_LOWER_N_MASK);
+	tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) |
+			(n_low << AUD_CONFIG_LOWER_N_SHIFT) |
+			AUD_CONFIG_N_PROG_ENABLE);
+	return tmp;
+}
+
+/* check whether N/CTS/M need be set manually */
+static bool audio_rate_need_prog(struct intel_crtc *crtc,
+					struct drm_display_mode *mode)
+{
+	if (((mode->clock == TMDS_297M) ||
+		 (mode->clock == TMDS_296M)) &&
+		intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
+		return true;
+	else
+		return false;
+}
+
 static bool intel_eld_uptodate(struct drm_connector *connector,
 			       int reg_eldv, uint32_t bits_eldv,
 			       int reg_elda, uint32_t bits_elda,
@@ -184,6 +248,8 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
 
 	DRM_DEBUG_KMS("Disable audio codec on pipe %c\n", pipe_name(pipe));
 
+	mutex_lock(&dev_priv->av_mutex);
+
 	/* Disable timestamps */
 	tmp = I915_READ(HSW_AUD_CFG(pipe));
 	tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
@@ -199,6 +265,8 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
 	tmp &= ~AUDIO_ELD_VALID(pipe);
 	tmp &= ~AUDIO_OUTPUT_ENABLE(pipe);
 	I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
+
+	mutex_unlock(&dev_priv->av_mutex);
 }
 
 static void hsw_audio_codec_enable(struct drm_connector *connector,
@@ -208,13 +276,20 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
 	struct drm_i915_private *dev_priv = connector->dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
 	enum pipe pipe = intel_crtc->pipe;
+	struct i915_audio_component *acomp = dev_priv->audio_component;
 	const uint8_t *eld = connector->eld;
+	struct intel_digital_port *intel_dig_port =
+		enc_to_dig_port(&encoder->base);
+	enum port port = intel_dig_port->port;
 	uint32_t tmp;
 	int len, i;
+	int n, rate;
 
 	DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n",
 		      pipe_name(pipe), drm_eld_size(eld));
 
+	mutex_lock(&dev_priv->av_mutex);
+
 	/* Enable audio presence detect, invalidate ELD */
 	tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
 	tmp |= AUDIO_OUTPUT_ENABLE(pipe);
@@ -246,13 +321,32 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
 	/* Enable timestamps */
 	tmp = I915_READ(HSW_AUD_CFG(pipe));
 	tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
-	tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
 	tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
 	if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
 		tmp |= AUD_CONFIG_N_VALUE_INDEX;
 	else
 		tmp |= audio_config_hdmi_pixel_clock(mode);
+
+	tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
+	if (audio_rate_need_prog(intel_crtc, mode)) {
+		if (!acomp)
+			rate = 0;
+		else if (port >= PORT_A && port <= PORT_E)
+			rate = acomp->aud_sample_rate[port];
+		else {
+			DRM_ERROR("invalid port: %d\n", port);
+			rate = 0;
+		}
+		n = audio_config_get_n(mode, rate);
+		if (n != 0)
+			tmp = audio_config_setup_n_reg(n, tmp);
+		else
+			DRM_DEBUG_KMS("no suitable N value is found\n");
+	}
+
 	I915_WRITE(HSW_AUD_CFG(pipe), tmp);
+
+	mutex_unlock(&dev_priv->av_mutex);
 }
 
 static void ilk_audio_codec_disable(struct intel_encoder *encoder)
@@ -527,12 +621,91 @@ static int i915_audio_component_get_cdclk_freq(struct device *dev)
 	return ret;
 }
 
+static int i915_audio_component_sync_audio_rate(struct device *dev,
+						int port, int rate)
+{
+	struct drm_i915_private *dev_priv = dev_to_i915(dev);
+	struct drm_device *drm_dev = dev_priv->dev;
+	struct intel_encoder *intel_encoder;
+	struct intel_digital_port *intel_dig_port;
+	struct intel_crtc *crtc;
+	struct drm_display_mode *mode;
+	struct i915_audio_component *acomp = dev_priv->audio_component;
+	enum pipe pipe = -1;
+	u32 tmp;
+	int n;
+
+	/* HSW, BDW SKL need this fix */
+	if (!IS_SKYLAKE(dev_priv) &&
+		!IS_BROADWELL(dev_priv) &&
+		!IS_HASWELL(dev_priv))
+		return 0;
+
+	mutex_lock(&dev_priv->av_mutex);
+	/* 1. get the pipe */
+	for_each_intel_encoder(drm_dev, intel_encoder) {
+		if (intel_encoder->type != INTEL_OUTPUT_HDMI)
+			continue;
+		intel_dig_port = enc_to_dig_port(&intel_encoder->base);
+		if (port == intel_dig_port->port) {
+			crtc = to_intel_crtc(intel_encoder->base.crtc);
+			if (!crtc) {
+				DRM_DEBUG_KMS("%s: crtc is NULL\n", __func__);
+				continue;
+			}
+			pipe = crtc->pipe;
+			break;
+		}
+	}
+
+	if (pipe == INVALID_PIPE) {
+		DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port));
+		mutex_unlock(&dev_priv->av_mutex);
+		return -ENODEV;
+	}
+	DRM_DEBUG_KMS("pipe %c connects port %c\n",
+				  pipe_name(pipe), port_name(port));
+	mode = &crtc->config->base.adjusted_mode;
+
+	/* port must be valid now, otherwise the pipe will be invalid */
+	acomp->aud_sample_rate[port] = rate;
+
+	/* 2. check whether to set the N/CTS/M manually or not */
+	if (!audio_rate_need_prog(crtc, mode)) {
+		tmp = I915_READ(HSW_AUD_CFG(pipe));
+		tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
+		I915_WRITE(HSW_AUD_CFG(pipe), tmp);
+		mutex_unlock(&dev_priv->av_mutex);
+		return 0;
+	}
+
+	n = audio_config_get_n(mode, rate);
+	if (n == 0) {
+		DRM_DEBUG_KMS("Using automatic mode for N value on port %c\n",
+					  port_name(port));
+		tmp = I915_READ(HSW_AUD_CFG(pipe));
+		tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
+		I915_WRITE(HSW_AUD_CFG(pipe), tmp);
+		mutex_unlock(&dev_priv->av_mutex);
+		return 0;
+	}
+
+	/* 3. set the N/CTS/M */
+	tmp = I915_READ(HSW_AUD_CFG(pipe));
+	tmp = audio_config_setup_n_reg(n, tmp);
+	I915_WRITE(HSW_AUD_CFG(pipe), tmp);
+
+	mutex_unlock(&dev_priv->av_mutex);
+	return 0;
+}
+
 static const struct i915_audio_component_ops i915_audio_component_ops = {
 	.owner		= THIS_MODULE,
 	.get_power	= i915_audio_component_get_power,
 	.put_power	= i915_audio_component_put_power,
 	.codec_wake_override = i915_audio_component_codec_wake_override,
 	.get_cdclk_freq	= i915_audio_component_get_cdclk_freq,
+	.sync_audio_rate = i915_audio_component_sync_audio_rate,
 };
 
 static int i915_audio_component_bind(struct device *i915_dev,
@@ -540,6 +713,7 @@ static int i915_audio_component_bind(struct device *i915_dev,
 {
 	struct i915_audio_component *acomp = data;
 	struct drm_i915_private *dev_priv = dev_to_i915(i915_dev);
+	int i;
 
 	if (WARN_ON(acomp->ops || acomp->dev))
 		return -EEXIST;
@@ -547,6 +721,9 @@ static int i915_audio_component_bind(struct device *i915_dev,
 	drm_modeset_lock_all(dev_priv->dev);
 	acomp->ops = &i915_audio_component_ops;
 	acomp->dev = i915_dev;
+	BUILD_BUG_ON(MAX_PORTS != I915_MAX_PORTS);
+	for (i = 0; i < ARRAY_SIZE(acomp->aud_sample_rate); i++)
+		acomp->aud_sample_rate[i] = 0;
 	dev_priv->audio_component = acomp;
 	drm_modeset_unlock_all(dev_priv->dev);
 

include/drm/i915_component.h

@@ -24,8 +24,18 @@
 #ifndef _I915_COMPONENT_H_
 #define _I915_COMPONENT_H_
 
+/* MAX_PORT is the number of port
+ * It must be sync with I915_MAX_PORTS defined i915_drv.h
+ * 5 should be enough as only HSW, BDW, SKL need such fix.
+ */
+#define MAX_PORTS 5
+
 struct i915_audio_component {
 	struct device *dev;
+	/**
+	 * @aud_sample_rate: the array of audio sample rate per port
+	 */
+	int aud_sample_rate[MAX_PORTS];
 
 	const struct i915_audio_component_ops {
 		struct module *owner;
@@ -33,6 +43,13 @@ struct i915_audio_component {
 		void (*put_power)(struct device *);
 		void (*codec_wake_override)(struct device *, bool enable);
 		int (*get_cdclk_freq)(struct device *);
+		/**
+		 * @sync_audio_rate: set n/cts based on the sample rate
+		 *
+		 * Called from audio driver. After audio driver sets the
+		 * sample rate, it will call this function to set n/cts
+		 */
+		int (*sync_audio_rate)(struct device *, int port, int rate);
 	} *ops;
 
 	const struct i915_audio_component_audio_ops {

sound/pci/hda/patch_hdmi.c

@@ -1775,6 +1775,16 @@ static bool check_non_pcm_per_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
 	return non_pcm;
 }
 
+/* There is a fixed mapping between audio pin node and display port
+ * on current Intel platforms:
+ * Pin Widget 5 - PORT B (port = 1 in i915 driver)
+ * Pin Widget 6 - PORT C (port = 2 in i915 driver)
+ * Pin Widget 7 - PORT D (port = 3 in i915 driver)
+ */
+static int intel_pin2port(hda_nid_t pin_nid)
+{
+	return pin_nid - 4;
+}
 
 /*
  * HDMI callbacks
@@ -1791,6 +1801,8 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 	int pin_idx = hinfo_to_pin_index(codec, hinfo);
 	struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
 	hda_nid_t pin_nid = per_pin->pin_nid;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct i915_audio_component *acomp = codec->bus->core.audio_component;
 	bool non_pcm;
 	int pinctl;
 
@@ -1807,6 +1819,13 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 		intel_not_share_assigned_cvt(codec, pin_nid, per_pin->mux_idx);
 	}
 
+	/* Call sync_audio_rate to set the N/CTS/M manually if necessary */
+	/* Todo: add DP1.2 MST audio support later */
+	if (acomp && acomp->ops && acomp->ops->sync_audio_rate)
+		acomp->ops->sync_audio_rate(acomp->dev,
+				intel_pin2port(pin_nid),
+				runtime->rate);
+
 	non_pcm = check_non_pcm_per_cvt(codec, cvt_nid);
 	mutex_lock(&per_pin->lock);
 	per_pin->channels = substream->runtime->channels;