linux/drivers/vhost/vhost.c

1117 lines
28 KiB
C
Raw Normal View History

vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
/* Copyright (C) 2009 Red Hat, Inc.
* Copyright (C) 2006 Rusty Russell IBM Corporation
*
* Author: Michael S. Tsirkin <mst@redhat.com>
*
* Inspiration, some code, and most witty comments come from
* Documentation/lguest/lguest.c, by Rusty Russell
*
* This work is licensed under the terms of the GNU GPL, version 2.
*
* Generic code for virtio server in host kernel.
*/
#include <linux/eventfd.h>
#include <linux/vhost.h>
#include <linux/virtio_net.h>
#include <linux/mm.h>
#include <linux/miscdevice.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include <linux/rcupdate.h>
#include <linux/poll.h>
#include <linux/file.h>
#include <linux/highmem.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
#include <linux/net.h>
#include <linux/if_packet.h>
#include <linux/if_arp.h>
#include <net/sock.h>
#include "vhost.h"
enum {
VHOST_MEMORY_MAX_NREGIONS = 64,
VHOST_MEMORY_F_LOG = 0x1,
};
static struct workqueue_struct *vhost_workqueue;
static void vhost_poll_func(struct file *file, wait_queue_head_t *wqh,
poll_table *pt)
{
struct vhost_poll *poll;
poll = container_of(pt, struct vhost_poll, table);
poll->wqh = wqh;
add_wait_queue(wqh, &poll->wait);
}
static int vhost_poll_wakeup(wait_queue_t *wait, unsigned mode, int sync,
void *key)
{
struct vhost_poll *poll;
poll = container_of(wait, struct vhost_poll, wait);
if (!((unsigned long)key & poll->mask))
return 0;
queue_work(vhost_workqueue, &poll->work);
return 0;
}
/* Init poll structure */
void vhost_poll_init(struct vhost_poll *poll, work_func_t func,
unsigned long mask)
{
INIT_WORK(&poll->work, func);
init_waitqueue_func_entry(&poll->wait, vhost_poll_wakeup);
init_poll_funcptr(&poll->table, vhost_poll_func);
poll->mask = mask;
}
/* Start polling a file. We add ourselves to file's wait queue. The caller must
* keep a reference to a file until after vhost_poll_stop is called. */
void vhost_poll_start(struct vhost_poll *poll, struct file *file)
{
unsigned long mask;
mask = file->f_op->poll(file, &poll->table);
if (mask)
vhost_poll_wakeup(&poll->wait, 0, 0, (void *)mask);
}
/* Stop polling a file. After this function returns, it becomes safe to drop the
* file reference. You must also flush afterwards. */
void vhost_poll_stop(struct vhost_poll *poll)
{
remove_wait_queue(poll->wqh, &poll->wait);
}
/* Flush any work that has been scheduled. When calling this, don't hold any
* locks that are also used by the callback. */
void vhost_poll_flush(struct vhost_poll *poll)
{
flush_work(&poll->work);
}
void vhost_poll_queue(struct vhost_poll *poll)
{
queue_work(vhost_workqueue, &poll->work);
}
static void vhost_vq_reset(struct vhost_dev *dev,
struct vhost_virtqueue *vq)
{
vq->num = 1;
vq->desc = NULL;
vq->avail = NULL;
vq->used = NULL;
vq->last_avail_idx = 0;
vq->avail_idx = 0;
vq->last_used_idx = 0;
vq->used_flags = 0;
vq->used_flags = 0;
vq->log_used = false;
vq->log_addr = -1ull;
vq->hdr_size = 0;
vq->private_data = NULL;
vq->log_base = NULL;
vq->error_ctx = NULL;
vq->error = NULL;
vq->kick = NULL;
vq->call_ctx = NULL;
vq->call = NULL;
vq->log_ctx = NULL;
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
}
long vhost_dev_init(struct vhost_dev *dev,
struct vhost_virtqueue *vqs, int nvqs)
{
int i;
dev->vqs = vqs;
dev->nvqs = nvqs;
mutex_init(&dev->mutex);
dev->log_ctx = NULL;
dev->log_file = NULL;
dev->memory = NULL;
dev->mm = NULL;
for (i = 0; i < dev->nvqs; ++i) {
dev->vqs[i].dev = dev;
mutex_init(&dev->vqs[i].mutex);
vhost_vq_reset(dev, dev->vqs + i);
if (dev->vqs[i].handle_kick)
vhost_poll_init(&dev->vqs[i].poll,
dev->vqs[i].handle_kick,
POLLIN);
}
return 0;
}
/* Caller should have device mutex */
long vhost_dev_check_owner(struct vhost_dev *dev)
{
/* Are you the owner? If not, I don't think you mean to do that */
return dev->mm == current->mm ? 0 : -EPERM;
}
/* Caller should have device mutex */
static long vhost_dev_set_owner(struct vhost_dev *dev)
{
/* Is there an owner already? */
if (dev->mm)
return -EBUSY;
/* No owner, become one */
dev->mm = get_task_mm(current);
return 0;
}
/* Caller should have device mutex */
long vhost_dev_reset_owner(struct vhost_dev *dev)
{
struct vhost_memory *memory;
/* Restore memory to default empty mapping. */
memory = kmalloc(offsetof(struct vhost_memory, regions), GFP_KERNEL);
if (!memory)
return -ENOMEM;
vhost_dev_cleanup(dev);
memory->nregions = 0;
dev->memory = memory;
return 0;
}
/* Caller should have device mutex */
void vhost_dev_cleanup(struct vhost_dev *dev)
{
int i;
for (i = 0; i < dev->nvqs; ++i) {
if (dev->vqs[i].kick && dev->vqs[i].handle_kick) {
vhost_poll_stop(&dev->vqs[i].poll);
vhost_poll_flush(&dev->vqs[i].poll);
}
if (dev->vqs[i].error_ctx)
eventfd_ctx_put(dev->vqs[i].error_ctx);
if (dev->vqs[i].error)
fput(dev->vqs[i].error);
if (dev->vqs[i].kick)
fput(dev->vqs[i].kick);
if (dev->vqs[i].call_ctx)
eventfd_ctx_put(dev->vqs[i].call_ctx);
if (dev->vqs[i].call)
fput(dev->vqs[i].call);
vhost_vq_reset(dev, dev->vqs + i);
}
if (dev->log_ctx)
eventfd_ctx_put(dev->log_ctx);
dev->log_ctx = NULL;
if (dev->log_file)
fput(dev->log_file);
dev->log_file = NULL;
/* No one will access memory at this point */
kfree(dev->memory);
dev->memory = NULL;
if (dev->mm)
mmput(dev->mm);
dev->mm = NULL;
}
static int log_access_ok(void __user *log_base, u64 addr, unsigned long sz)
{
u64 a = addr / VHOST_PAGE_SIZE / 8;
/* Make sure 64 bit math will not overflow. */
if (a > ULONG_MAX - (unsigned long)log_base ||
a + (unsigned long)log_base > ULONG_MAX)
return -EFAULT;
return access_ok(VERIFY_WRITE, log_base + a,
(sz + VHOST_PAGE_SIZE * 8 - 1) / VHOST_PAGE_SIZE / 8);
}
/* Caller should have vq mutex and device mutex. */
static int vq_memory_access_ok(void __user *log_base, struct vhost_memory *mem,
int log_all)
{
int i;
if (!mem)
return 0;
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
for (i = 0; i < mem->nregions; ++i) {
struct vhost_memory_region *m = mem->regions + i;
unsigned long a = m->userspace_addr;
if (m->memory_size > ULONG_MAX)
return 0;
else if (!access_ok(VERIFY_WRITE, (void __user *)a,
m->memory_size))
return 0;
else if (log_all && !log_access_ok(log_base,
m->guest_phys_addr,
m->memory_size))
return 0;
}
return 1;
}
/* Can we switch to this memory table? */
/* Caller should have device mutex but not vq mutex */
static int memory_access_ok(struct vhost_dev *d, struct vhost_memory *mem,
int log_all)
{
int i;
for (i = 0; i < d->nvqs; ++i) {
int ok;
mutex_lock(&d->vqs[i].mutex);
/* If ring is inactive, will check when it's enabled. */
if (d->vqs[i].private_data)
ok = vq_memory_access_ok(d->vqs[i].log_base, mem,
log_all);
else
ok = 1;
mutex_unlock(&d->vqs[i].mutex);
if (!ok)
return 0;
}
return 1;
}
static int vq_access_ok(unsigned int num,
struct vring_desc __user *desc,
struct vring_avail __user *avail,
struct vring_used __user *used)
{
return access_ok(VERIFY_READ, desc, num * sizeof *desc) &&
access_ok(VERIFY_READ, avail,
sizeof *avail + num * sizeof *avail->ring) &&
access_ok(VERIFY_WRITE, used,
sizeof *used + num * sizeof *used->ring);
}
/* Can we log writes? */
/* Caller should have device mutex but not vq mutex */
int vhost_log_access_ok(struct vhost_dev *dev)
{
return memory_access_ok(dev, dev->memory, 1);
}
/* Verify access for write logging. */
/* Caller should have vq mutex and device mutex */
static int vq_log_access_ok(struct vhost_virtqueue *vq, void __user *log_base)
{
return vq_memory_access_ok(log_base, vq->dev->memory,
vhost_has_feature(vq->dev, VHOST_F_LOG_ALL)) &&
(!vq->log_used || log_access_ok(log_base, vq->log_addr,
sizeof *vq->used +
vq->num * sizeof *vq->used->ring));
}
/* Can we start vq? */
/* Caller should have vq mutex and device mutex */
int vhost_vq_access_ok(struct vhost_virtqueue *vq)
{
return vq_access_ok(vq->num, vq->desc, vq->avail, vq->used) &&
vq_log_access_ok(vq, vq->log_base);
}
static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m)
{
struct vhost_memory mem, *newmem, *oldmem;
unsigned long size = offsetof(struct vhost_memory, regions);
long r;
r = copy_from_user(&mem, m, size);
if (r)
return r;
if (mem.padding)
return -EOPNOTSUPP;
if (mem.nregions > VHOST_MEMORY_MAX_NREGIONS)
return -E2BIG;
newmem = kmalloc(size + mem.nregions * sizeof *m->regions, GFP_KERNEL);
if (!newmem)
return -ENOMEM;
memcpy(newmem, &mem, size);
r = copy_from_user(newmem->regions, m->regions,
mem.nregions * sizeof *m->regions);
if (r) {
kfree(newmem);
return r;
}
if (!memory_access_ok(d, newmem, vhost_has_feature(d, VHOST_F_LOG_ALL)))
return -EFAULT;
oldmem = d->memory;
rcu_assign_pointer(d->memory, newmem);
synchronize_rcu();
kfree(oldmem);
return 0;
}
static int init_used(struct vhost_virtqueue *vq,
struct vring_used __user *used)
{
int r = put_user(vq->used_flags, &used->flags);
if (r)
return r;
return get_user(vq->last_used_idx, &used->idx);
}
static long vhost_set_vring(struct vhost_dev *d, int ioctl, void __user *argp)
{
struct file *eventfp, *filep = NULL,
*pollstart = NULL, *pollstop = NULL;
struct eventfd_ctx *ctx = NULL;
u32 __user *idxp = argp;
struct vhost_virtqueue *vq;
struct vhost_vring_state s;
struct vhost_vring_file f;
struct vhost_vring_addr a;
u32 idx;
long r;
r = get_user(idx, idxp);
if (r < 0)
return r;
if (idx > d->nvqs)
return -ENOBUFS;
vq = d->vqs + idx;
mutex_lock(&vq->mutex);
switch (ioctl) {
case VHOST_SET_VRING_NUM:
/* Resizing ring with an active backend?
* You don't want to do that. */
if (vq->private_data) {
r = -EBUSY;
break;
}
r = copy_from_user(&s, argp, sizeof s);
if (r < 0)
break;
if (!s.num || s.num > 0xffff || (s.num & (s.num - 1))) {
r = -EINVAL;
break;
}
vq->num = s.num;
break;
case VHOST_SET_VRING_BASE:
/* Moving base with an active backend?
* You don't want to do that. */
if (vq->private_data) {
r = -EBUSY;
break;
}
r = copy_from_user(&s, argp, sizeof s);
if (r < 0)
break;
if (s.num > 0xffff) {
r = -EINVAL;
break;
}
vq->last_avail_idx = s.num;
/* Forget the cached index value. */
vq->avail_idx = vq->last_avail_idx;
break;
case VHOST_GET_VRING_BASE:
s.index = idx;
s.num = vq->last_avail_idx;
r = copy_to_user(argp, &s, sizeof s);
break;
case VHOST_SET_VRING_ADDR:
r = copy_from_user(&a, argp, sizeof a);
if (r < 0)
break;
if (a.flags & ~(0x1 << VHOST_VRING_F_LOG)) {
r = -EOPNOTSUPP;
break;
}
/* For 32bit, verify that the top 32bits of the user
data are set to zero. */
if ((u64)(unsigned long)a.desc_user_addr != a.desc_user_addr ||
(u64)(unsigned long)a.used_user_addr != a.used_user_addr ||
(u64)(unsigned long)a.avail_user_addr != a.avail_user_addr) {
r = -EFAULT;
break;
}
if ((a.avail_user_addr & (sizeof *vq->avail->ring - 1)) ||
(a.used_user_addr & (sizeof *vq->used->ring - 1)) ||
(a.log_guest_addr & (sizeof *vq->used->ring - 1))) {
r = -EINVAL;
break;
}
/* We only verify access here if backend is configured.
* If it is not, we don't as size might not have been setup.
* We will verify when backend is configured. */
if (vq->private_data) {
if (!vq_access_ok(vq->num,
(void __user *)(unsigned long)a.desc_user_addr,
(void __user *)(unsigned long)a.avail_user_addr,
(void __user *)(unsigned long)a.used_user_addr)) {
r = -EINVAL;
break;
}
/* Also validate log access for used ring if enabled. */
if ((a.flags & (0x1 << VHOST_VRING_F_LOG)) &&
!log_access_ok(vq->log_base, a.log_guest_addr,
sizeof *vq->used +
vq->num * sizeof *vq->used->ring)) {
r = -EINVAL;
break;
}
}
r = init_used(vq, (struct vring_used __user *)(unsigned long)
a.used_user_addr);
if (r)
break;
vq->log_used = !!(a.flags & (0x1 << VHOST_VRING_F_LOG));
vq->desc = (void __user *)(unsigned long)a.desc_user_addr;
vq->avail = (void __user *)(unsigned long)a.avail_user_addr;
vq->log_addr = a.log_guest_addr;
vq->used = (void __user *)(unsigned long)a.used_user_addr;
break;
case VHOST_SET_VRING_KICK:
r = copy_from_user(&f, argp, sizeof f);
if (r < 0)
break;
eventfp = f.fd == -1 ? NULL : eventfd_fget(f.fd);
if (IS_ERR(eventfp)) {
r = PTR_ERR(eventfp);
break;
}
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
if (eventfp != vq->kick) {
pollstop = filep = vq->kick;
pollstart = vq->kick = eventfp;
} else
filep = eventfp;
break;
case VHOST_SET_VRING_CALL:
r = copy_from_user(&f, argp, sizeof f);
if (r < 0)
break;
eventfp = f.fd == -1 ? NULL : eventfd_fget(f.fd);
if (IS_ERR(eventfp)) {
r = PTR_ERR(eventfp);
break;
}
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
if (eventfp != vq->call) {
filep = vq->call;
ctx = vq->call_ctx;
vq->call = eventfp;
vq->call_ctx = eventfp ?
eventfd_ctx_fileget(eventfp) : NULL;
} else
filep = eventfp;
break;
case VHOST_SET_VRING_ERR:
r = copy_from_user(&f, argp, sizeof f);
if (r < 0)
break;
eventfp = f.fd == -1 ? NULL : eventfd_fget(f.fd);
if (IS_ERR(eventfp)) {
r = PTR_ERR(eventfp);
break;
}
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
if (eventfp != vq->error) {
filep = vq->error;
vq->error = eventfp;
ctx = vq->error_ctx;
vq->error_ctx = eventfp ?
eventfd_ctx_fileget(eventfp) : NULL;
} else
filep = eventfp;
break;
default:
r = -ENOIOCTLCMD;
}
if (pollstop && vq->handle_kick)
vhost_poll_stop(&vq->poll);
if (ctx)
eventfd_ctx_put(ctx);
if (filep)
fput(filep);
if (pollstart && vq->handle_kick)
vhost_poll_start(&vq->poll, vq->kick);
mutex_unlock(&vq->mutex);
if (pollstop && vq->handle_kick)
vhost_poll_flush(&vq->poll);
return r;
}
/* Caller must have device mutex */
long vhost_dev_ioctl(struct vhost_dev *d, unsigned int ioctl, unsigned long arg)
{
void __user *argp = (void __user *)arg;
struct file *eventfp, *filep = NULL;
struct eventfd_ctx *ctx = NULL;
u64 p;
long r;
int i, fd;
/* If you are not the owner, you can become one */
if (ioctl == VHOST_SET_OWNER) {
r = vhost_dev_set_owner(d);
goto done;
}
/* You must be the owner to do anything else */
r = vhost_dev_check_owner(d);
if (r)
goto done;
switch (ioctl) {
case VHOST_SET_MEM_TABLE:
r = vhost_set_memory(d, argp);
break;
case VHOST_SET_LOG_BASE:
r = copy_from_user(&p, argp, sizeof p);
if (r < 0)
break;
if ((u64)(unsigned long)p != p) {
r = -EFAULT;
break;
}
for (i = 0; i < d->nvqs; ++i) {
struct vhost_virtqueue *vq;
void __user *base = (void __user *)(unsigned long)p;
vq = d->vqs + i;
mutex_lock(&vq->mutex);
/* If ring is inactive, will check when it's enabled. */
if (vq->private_data && !vq_log_access_ok(vq, base))
r = -EFAULT;
else
vq->log_base = base;
mutex_unlock(&vq->mutex);
}
break;
case VHOST_SET_LOG_FD:
r = get_user(fd, (int __user *)argp);
if (r < 0)
break;
eventfp = fd == -1 ? NULL : eventfd_fget(fd);
if (IS_ERR(eventfp)) {
r = PTR_ERR(eventfp);
break;
}
if (eventfp != d->log_file) {
filep = d->log_file;
ctx = d->log_ctx;
d->log_ctx = eventfp ?
eventfd_ctx_fileget(eventfp) : NULL;
} else
filep = eventfp;
for (i = 0; i < d->nvqs; ++i) {
mutex_lock(&d->vqs[i].mutex);
d->vqs[i].log_ctx = d->log_ctx;
mutex_unlock(&d->vqs[i].mutex);
}
if (ctx)
eventfd_ctx_put(ctx);
if (filep)
fput(filep);
break;
default:
r = vhost_set_vring(d, ioctl, argp);
break;
}
done:
return r;
}
static const struct vhost_memory_region *find_region(struct vhost_memory *mem,
__u64 addr, __u32 len)
{
struct vhost_memory_region *reg;
int i;
/* linear search is not brilliant, but we really have on the order of 6
* regions in practice */
for (i = 0; i < mem->nregions; ++i) {
reg = mem->regions + i;
if (reg->guest_phys_addr <= addr &&
reg->guest_phys_addr + reg->memory_size - 1 >= addr)
return reg;
}
return NULL;
}
/* TODO: This is really inefficient. We need something like get_user()
* (instruction directly accesses the data, with an exception table entry
* returning -EFAULT). See Documentation/x86/exception-tables.txt.
*/
static int set_bit_to_user(int nr, void __user *addr)
{
unsigned long log = (unsigned long)addr;
struct page *page;
void *base;
int bit = nr + (log % PAGE_SIZE) * 8;
int r;
r = get_user_pages_fast(log, 1, 1, &page);
if (r < 0)
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
return r;
BUG_ON(r != 1);
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
base = kmap_atomic(page, KM_USER0);
set_bit(bit, base);
kunmap_atomic(base, KM_USER0);
set_page_dirty_lock(page);
put_page(page);
return 0;
}
static int log_write(void __user *log_base,
u64 write_address, u64 write_length)
{
int r;
if (!write_length)
return 0;
write_address /= VHOST_PAGE_SIZE;
for (;;) {
u64 base = (u64)(unsigned long)log_base;
u64 log = base + write_address / 8;
int bit = write_address % 8;
if ((u64)(unsigned long)log != log)
return -EFAULT;
r = set_bit_to_user(bit, (void __user *)(unsigned long)log);
if (r < 0)
return r;
if (write_length <= VHOST_PAGE_SIZE)
break;
write_length -= VHOST_PAGE_SIZE;
write_address += VHOST_PAGE_SIZE;
}
return r;
}
int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log,
unsigned int log_num, u64 len)
{
int i, r;
/* Make sure data written is seen before log. */
smp_wmb();
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
for (i = 0; i < log_num; ++i) {
u64 l = min(log[i].len, len);
r = log_write(vq->log_base, log[i].addr, l);
if (r < 0)
return r;
len -= l;
if (!len)
return 0;
}
if (vq->log_ctx)
eventfd_signal(vq->log_ctx, 1);
/* Length written exceeds what we have stored. This is a bug. */
BUG();
return 0;
}
static int translate_desc(struct vhost_dev *dev, u64 addr, u32 len,
struct iovec iov[], int iov_size)
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
{
const struct vhost_memory_region *reg;
struct vhost_memory *mem;
struct iovec *_iov;
u64 s = 0;
int ret = 0;
rcu_read_lock();
mem = rcu_dereference(dev->memory);
while ((u64)len > s) {
u64 size;
if (ret >= iov_size) {
ret = -ENOBUFS;
break;
}
reg = find_region(mem, addr, len);
if (!reg) {
ret = -EFAULT;
break;
}
_iov = iov + ret;
size = reg->memory_size - addr + reg->guest_phys_addr;
_iov->iov_len = min((u64)len, size);
_iov->iov_base = (void __user *)(unsigned long)
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
(reg->userspace_addr + addr - reg->guest_phys_addr);
s += size;
addr += size;
++ret;
}
rcu_read_unlock();
return ret;
}
/* Each buffer in the virtqueues is actually a chain of descriptors. This
* function returns the next descriptor in the chain,
* or -1U if we're at the end. */
static unsigned next_desc(struct vring_desc *desc)
{
unsigned int next;
/* If this descriptor says it doesn't chain, we're done. */
if (!(desc->flags & VRING_DESC_F_NEXT))
return -1U;
/* Check they're not leading us off end of descriptors. */
next = desc->next;
/* Make sure compiler knows to grab that: we don't want it changing! */
/* We will use the result as an index in an array, so most
* architectures only need a compiler barrier here. */
read_barrier_depends();
return next;
}
static unsigned get_indirect(struct vhost_dev *dev, struct vhost_virtqueue *vq,
struct iovec iov[], unsigned int iov_size,
unsigned int *out_num, unsigned int *in_num,
struct vhost_log *log, unsigned int *log_num,
struct vring_desc *indirect)
{
struct vring_desc desc;
unsigned int i = 0, count, found = 0;
int ret;
/* Sanity check */
if (indirect->len % sizeof desc) {
vq_err(vq, "Invalid length in indirect descriptor: "
"len 0x%llx not multiple of 0x%zx\n",
(unsigned long long)indirect->len,
sizeof desc);
return -EINVAL;
}
ret = translate_desc(dev, indirect->addr, indirect->len, vq->indirect,
ARRAY_SIZE(vq->indirect));
if (ret < 0) {
vq_err(vq, "Translation failure %d in indirect.\n", ret);
return ret;
}
/* We will use the result as an address to read from, so most
* architectures only need a compiler barrier here. */
read_barrier_depends();
count = indirect->len / sizeof desc;
/* Buffers are chained via a 16 bit next field, so
* we can have at most 2^16 of these. */
if (count > USHORT_MAX + 1) {
vq_err(vq, "Indirect buffer length too big: %d\n",
indirect->len);
return -E2BIG;
}
do {
unsigned iov_count = *in_num + *out_num;
if (++found > count) {
vq_err(vq, "Loop detected: last one at %u "
"indirect size %u\n",
i, count);
return -EINVAL;
}
if (memcpy_fromiovec((unsigned char *)&desc, vq->indirect,
sizeof desc)) {
vq_err(vq, "Failed indirect descriptor: idx %d, %zx\n",
i, (size_t)indirect->addr + i * sizeof desc);
return -EINVAL;
}
if (desc.flags & VRING_DESC_F_INDIRECT) {
vq_err(vq, "Nested indirect descriptor: idx %d, %zx\n",
i, (size_t)indirect->addr + i * sizeof desc);
return -EINVAL;
}
ret = translate_desc(dev, desc.addr, desc.len, iov + iov_count,
iov_size - iov_count);
if (ret < 0) {
vq_err(vq, "Translation failure %d indirect idx %d\n",
ret, i);
return ret;
}
/* If this is an input descriptor, increment that count. */
if (desc.flags & VRING_DESC_F_WRITE) {
*in_num += ret;
if (unlikely(log)) {
log[*log_num].addr = desc.addr;
log[*log_num].len = desc.len;
++*log_num;
}
} else {
/* If it's an output descriptor, they're all supposed
* to come before any input descriptors. */
if (*in_num) {
vq_err(vq, "Indirect descriptor "
"has out after in: idx %d\n", i);
return -EINVAL;
}
*out_num += ret;
}
} while ((i = next_desc(&desc)) != -1);
return 0;
}
/* This looks in the virtqueue and for the first available buffer, and converts
* it to an iovec for convenient access. Since descriptors consist of some
* number of output then some number of input descriptors, it's actually two
* iovecs, but we pack them into one and note how many of each there were.
*
* This function returns the descriptor number found, or vq->num (which
* is never a valid descriptor number) if none was found. */
unsigned vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
struct iovec iov[], unsigned int iov_size,
unsigned int *out_num, unsigned int *in_num,
struct vhost_log *log, unsigned int *log_num)
{
struct vring_desc desc;
unsigned int i, head, found = 0;
u16 last_avail_idx;
int ret;
/* Check it isn't doing very strange things with descriptor numbers. */
last_avail_idx = vq->last_avail_idx;
if (get_user(vq->avail_idx, &vq->avail->idx)) {
vq_err(vq, "Failed to access avail idx at %p\n",
&vq->avail->idx);
return vq->num;
}
if ((u16)(vq->avail_idx - last_avail_idx) > vq->num) {
vq_err(vq, "Guest moved used index from %u to %u",
last_avail_idx, vq->avail_idx);
return vq->num;
}
/* If there's nothing new since last we looked, return invalid. */
if (vq->avail_idx == last_avail_idx)
return vq->num;
/* Only get avail ring entries after they have been exposed by guest. */
smp_rmb();
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
/* Grab the next descriptor number they're advertising, and increment
* the index we've seen. */
if (get_user(head, &vq->avail->ring[last_avail_idx % vq->num])) {
vq_err(vq, "Failed to read head: idx %d address %p\n",
last_avail_idx,
&vq->avail->ring[last_avail_idx % vq->num]);
return vq->num;
}
/* If their number is silly, that's an error. */
if (head >= vq->num) {
vq_err(vq, "Guest says index %u > %u is available",
head, vq->num);
return vq->num;
}
/* When we start there are none of either input nor output. */
*out_num = *in_num = 0;
if (unlikely(log))
*log_num = 0;
i = head;
do {
unsigned iov_count = *in_num + *out_num;
if (i >= vq->num) {
vq_err(vq, "Desc index is %u > %u, head = %u",
i, vq->num, head);
return vq->num;
}
if (++found > vq->num) {
vq_err(vq, "Loop detected: last one at %u "
"vq size %u head %u\n",
i, vq->num, head);
return vq->num;
}
ret = copy_from_user(&desc, vq->desc + i, sizeof desc);
if (ret) {
vq_err(vq, "Failed to get descriptor: idx %d addr %p\n",
i, vq->desc + i);
return vq->num;
}
if (desc.flags & VRING_DESC_F_INDIRECT) {
ret = get_indirect(dev, vq, iov, iov_size,
out_num, in_num,
log, log_num, &desc);
if (ret < 0) {
vq_err(vq, "Failure detected "
"in indirect descriptor at idx %d\n", i);
return vq->num;
}
continue;
}
ret = translate_desc(dev, desc.addr, desc.len, iov + iov_count,
iov_size - iov_count);
if (ret < 0) {
vq_err(vq, "Translation failure %d descriptor idx %d\n",
ret, i);
return vq->num;
}
if (desc.flags & VRING_DESC_F_WRITE) {
/* If this is an input descriptor,
* increment that count. */
*in_num += ret;
if (unlikely(log)) {
log[*log_num].addr = desc.addr;
log[*log_num].len = desc.len;
++*log_num;
}
} else {
/* If it's an output descriptor, they're all supposed
* to come before any input descriptors. */
if (*in_num) {
vq_err(vq, "Descriptor has out after in: "
"idx %d\n", i);
return vq->num;
}
*out_num += ret;
}
} while ((i = next_desc(&desc)) != -1);
/* On success, increment avail index. */
vq->last_avail_idx++;
return head;
}
/* Reverse the effect of vhost_get_vq_desc. Useful for error handling. */
void vhost_discard_vq_desc(struct vhost_virtqueue *vq)
{
vq->last_avail_idx--;
}
/* After we've used one of their buffers, we tell them about it. We'll then
* want to notify the guest, using eventfd. */
int vhost_add_used(struct vhost_virtqueue *vq, unsigned int head, int len)
{
struct vring_used_elem __user *used;
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
/* The virtqueue contains a ring of used buffers. Get a pointer to the
* next entry in that used ring. */
used = &vq->used->ring[vq->last_used_idx % vq->num];
if (put_user(head, &used->id)) {
vq_err(vq, "Failed to write used id");
return -EFAULT;
}
if (put_user(len, &used->len)) {
vq_err(vq, "Failed to write used len");
return -EFAULT;
}
/* Make sure buffer is written before we update index. */
smp_wmb();
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
if (put_user(vq->last_used_idx + 1, &vq->used->idx)) {
vq_err(vq, "Failed to increment used idx");
return -EFAULT;
}
if (unlikely(vq->log_used)) {
/* Make sure data is seen before log. */
smp_wmb();
/* Log used ring entry write. */
log_write(vq->log_base,
vq->log_addr +
((void __user *)used - (void __user *)vq->used),
sizeof *used);
/* Log used index update. */
log_write(vq->log_base,
vq->log_addr + offsetof(struct vring_used, idx),
sizeof vq->used->idx);
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
if (vq->log_ctx)
eventfd_signal(vq->log_ctx, 1);
}
vq->last_used_idx++;
return 0;
}
/* This actually signals the guest, using eventfd. */
void vhost_signal(struct vhost_dev *dev, struct vhost_virtqueue *vq)
{
__u16 flags = 0;
if (get_user(flags, &vq->avail->flags)) {
vq_err(vq, "Failed to get flags");
return;
}
/* If they don't want an interrupt, don't signal, unless empty. */
if ((flags & VRING_AVAIL_F_NO_INTERRUPT) &&
(vq->avail_idx != vq->last_avail_idx ||
!vhost_has_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY)))
return;
/* Signal the Guest tell them we used something up. */
if (vq->call_ctx)
eventfd_signal(vq->call_ctx, 1);
}
/* And here's the combo meal deal. Supersize me! */
void vhost_add_used_and_signal(struct vhost_dev *dev,
struct vhost_virtqueue *vq,
unsigned int head, int len)
{
vhost_add_used(vq, head, len);
vhost_signal(dev, vq);
}
/* OK, now we need to know about added descriptors. */
bool vhost_enable_notify(struct vhost_virtqueue *vq)
{
u16 avail_idx;
int r;
if (!(vq->used_flags & VRING_USED_F_NO_NOTIFY))
return false;
vq->used_flags &= ~VRING_USED_F_NO_NOTIFY;
r = put_user(vq->used_flags, &vq->used->flags);
if (r) {
vq_err(vq, "Failed to enable notification at %p: %d\n",
&vq->used->flags, r);
return false;
}
/* They could have slipped one in as we were doing that: make
* sure it's written, then check again. */
smp_mb();
vhost_net: a kernel-level virtio server What it is: vhost net is a character device that can be used to reduce the number of system calls involved in virtio networking. Existing virtio net code is used in the guest without modification. There's similarity with vringfd, with some differences and reduced scope - uses eventfd for signalling - structures can be moved around in memory at any time (good for migration, bug work-arounds in userspace) - write logging is supported (good for migration) - support memory table and not just an offset (needed for kvm) common virtio related code has been put in a separate file vhost.c and can be made into a separate module if/when more backends appear. I used Rusty's lguest.c as the source for developing this part : this supplied me with witty comments I wouldn't be able to write myself. What it is not: vhost net is not a bus, and not a generic new system call. No assumptions are made on how guest performs hypercalls. Userspace hypervisors are supported as well as kvm. How it works: Basically, we connect virtio frontend (configured by userspace) to a backend. The backend could be a network device, or a tap device. Backend is also configured by userspace, including vlan/mac etc. Status: This works for me, and I haven't see any crashes. Compared to userspace, people reported improved latency (as I save up to 4 system calls per packet), as well as better bandwidth and CPU utilization. Features that I plan to look at in the future: - mergeable buffers - zero copy - scalability tuning: figure out the best threading model to use Note on RCU usage (this is also documented in vhost.h, near private_pointer which is the value protected by this variant of RCU): what is happening is that the rcu_dereference() is being used in a workqueue item. The role of rcu_read_lock() is taken on by the start of execution of the workqueue item, of rcu_read_unlock() by the end of execution of the workqueue item, and of synchronize_rcu() by flush_workqueue()/flush_work(). In the future we might need to apply some gcc attribute or sparse annotation to the function passed to INIT_WORK(). Paul's ack below is for this RCU usage. (Includes fixes by Alan Cox <alan@linux.intel.com>, David L Stevens <dlstevens@us.ibm.com>, Chris Wright <chrisw@redhat.com>) Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14 14:17:27 +08:00
r = get_user(avail_idx, &vq->avail->idx);
if (r) {
vq_err(vq, "Failed to check avail idx at %p: %d\n",
&vq->avail->idx, r);
return false;
}
return avail_idx != vq->last_avail_idx;
}
/* We don't need to be notified again. */
void vhost_disable_notify(struct vhost_virtqueue *vq)
{
int r;
if (vq->used_flags & VRING_USED_F_NO_NOTIFY)
return;
vq->used_flags |= VRING_USED_F_NO_NOTIFY;
r = put_user(vq->used_flags, &vq->used->flags);
if (r)
vq_err(vq, "Failed to enable notification at %p: %d\n",
&vq->used->flags, r);
}
int vhost_init(void)
{
vhost_workqueue = create_singlethread_workqueue("vhost");
if (!vhost_workqueue)
return -ENOMEM;
return 0;
}
void vhost_cleanup(void)
{
destroy_workqueue(vhost_workqueue);
}