korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-15 06:55:13 +08:00
Code Issues Packages Projects Releases Wiki Activity
fdc509b15e
linux/arch/arm/configs/integrator_defconfig

89 lines
1.9 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_SYSVIPC=y
ARM: integrator: update defconfig This updates the integrator defconfig, apart from the usual re-shuffling of symbols due to restructuring of the kernel Kconfig this will also: - Enable IM-PD1 so all hardware is enabled out-of-the-box - Enable the LEDs class and heartbeat trigger, so that the LED driver in plat-versatile/ is compiled. - Enale some debug code like the CLK debug. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10 20:00:33 +08:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 13:12:18 +08:00
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
ARM: integrator: update defconfig This updates the integrator defconfig, apart from the usual re-shuffling of symbols due to restructuring of the kernel Kconfig this will also: - Enable IM-PD1 so all hardware is enabled out-of-the-box - Enable the LEDs class and heartbeat trigger, so that the LED driver in plat-versatile/ is compiled. - Enale some debug code like the CLK debug. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10 20:00:33 +08:00
CONFIG_PARTITION_ADVANCED=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 13:41:19 +08:00
CONFIG_ARCH_INTEGRATOR_CP=y
ARM: integrator: update defconfig This updates the integrator defconfig, apart from the usual re-shuffling of symbols due to restructuring of the kernel Kconfig this will also: - Enable IM-PD1 so all hardware is enabled out-of-the-box - Enable the LEDs class and heartbeat trigger, so that the LED driver in plat-versatile/ is compiled. - Enale some debug code like the CLK debug. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10 20:00:33 +08:00
CONFIG_INTEGRATOR_IMPD1=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_CPU_ARM720T=y
CONFIG_CPU_ARM920T=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 13:41:19 +08:00
CONFIG_CPU_ARM922T=y
CONFIG_CPU_ARM926T=y
CONFIG_CPU_ARM1020=y
CONFIG_CPU_ARM1022=y
CONFIG_CPU_ARM1026=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_PCI=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 13:41:19 +08:00
CONFIG_PREEMPT=y
CONFIG_AEABI=y
ARM: integrator: update defconfig This updates the integrator defconfig, apart from the usual re-shuffling of symbols due to restructuring of the kernel Kconfig this will also: - Enable IM-PD1 so all hardware is enabled out-of-the-box - Enable the LEDs class and heartbeat trigger, so that the LED driver in plat-versatile/ is compiled. - Enale some debug code like the CLK debug. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10 20:00:33 +08:00
# CONFIG_ATAGS is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 13:41:19 +08:00
CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_FPE_NWFPE=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 13:12:18 +08:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_INTELEXT=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 13:41:19 +08:00
CONFIG_MTD_PHYSMAP=y
ARM: integrator: update defconfig This updates the integrator defconfig, apart from the usual re-shuffling of symbols due to restructuring of the kernel Kconfig this will also: - Enable IM-PD1 so all hardware is enabled out-of-the-box - Enable the LEDs class and heartbeat trigger, so that the LED driver in plat-versatile/ is compiled. - Enale some debug code like the CLK debug. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10 20:00:33 +08:00
CONFIG_PROC_DEVICETREE=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_E100=y
ARM: 7268/1: integrator: defconfig for both AP and CP This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-04 17:50:09 +08:00
CONFIG_SMC91X=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_SERIO_SERPORT is not set
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
ARM: 7268/1: integrator: defconfig for both AP and CP This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-04 17:50:09 +08:00
CONFIG_FB_ARMCLCD=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
ARM: 7268/1: integrator: defconfig for both AP and CP This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-04 17:50:09 +08:00
# CONFIG_VGA_CONSOLE is not set
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
ARM: integrator: update defconfig This updates the integrator defconfig, apart from the usual re-shuffling of symbols due to restructuring of the kernel Kconfig this will also: - Enable IM-PD1 so all hardware is enabled out-of-the-box - Enable the LEDs class and heartbeat trigger, so that the LED driver in plat-versatile/ is compiled. - Enale some debug code like the CLK debug. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10 20:00:33 +08:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 13:41:19 +08:00
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PL030=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_EXT2_FS=y
ARM: 7268/1: integrator: defconfig for both AP and CP This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-04 17:50:09 +08:00
CONFIG_VFAT_FS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 13:12:18 +08:00
CONFIG_ROOT_NFS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
ARM: 7268/1: integrator: defconfig for both AP and CP This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-04 17:50:09 +08:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_MAGIC_SYSRQ=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 13:12:18 +08:00
CONFIG_DEBUG_KERNEL=y
Reference in New Issue Copy Permalink