linux/drivers/scsi/megaraid/megaraid_sas_base.c

7661 lines
207 KiB
C
Raw Normal View History

/*
* Linux MegaRAID driver for SAS based RAID controllers
*
* Copyright (c) 2003-2013 LSI Corporation
* Copyright (c) 2013-2014 Avago Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Authors: Avago Technologies
* Sreenivas Bagalkote
* Sumant Patro
* Bo Yang
* Adam Radford
* Kashyap Desai <kashyap.desai@avagotech.com>
* Sumit Saxena <sumit.saxena@avagotech.com>
*
* Send feedback to: megaraidlinux.pdl@avagotech.com
*
* Mail to: Avago Technologies, 350 West Trimble Road, Building 90,
* San Jose, California 95131
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/moduleparam.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/uio.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <asm/unaligned.h>
#include <linux/fs.h>
#include <linux/compat.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
#include <linux/poll.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include "megaraid_sas_fusion.h"
#include "megaraid_sas.h"
/*
* Number of sectors per IO command
* Will be set in megasas_init_mfi if user does not provide
*/
static unsigned int max_sectors;
module_param_named(max_sectors, max_sectors, int, 0);
MODULE_PARM_DESC(max_sectors,
"Maximum number of sectors per IO command");
static int msix_disable;
module_param(msix_disable, int, S_IRUGO);
MODULE_PARM_DESC(msix_disable, "Disable MSI-X interrupt handling. Default: 0");
static unsigned int msix_vectors;
module_param(msix_vectors, int, S_IRUGO);
MODULE_PARM_DESC(msix_vectors, "MSI-X max vector count. Default: Set by FW");
static int allow_vf_ioctls;
module_param(allow_vf_ioctls, int, S_IRUGO);
MODULE_PARM_DESC(allow_vf_ioctls, "Allow ioctls in SR-IOV VF mode. Default: 0");
static unsigned int throttlequeuedepth = MEGASAS_THROTTLE_QUEUE_DEPTH;
module_param(throttlequeuedepth, int, S_IRUGO);
MODULE_PARM_DESC(throttlequeuedepth,
"Adapter queue depth when throttled due to I/O timeout. Default: 16");
unsigned int resetwaittime = MEGASAS_RESET_WAIT_TIME;
module_param(resetwaittime, int, S_IRUGO);
MODULE_PARM_DESC(resetwaittime, "Wait time in seconds after I/O timeout "
"before resetting adapter. Default: 180");
int smp_affinity_enable = 1;
module_param(smp_affinity_enable, int, S_IRUGO);
MODULE_PARM_DESC(smp_affinity_enable, "SMP affinity feature enable/disbale Default: enable(1)");
int rdpq_enable = 1;
module_param(rdpq_enable, int, S_IRUGO);
MODULE_PARM_DESC(rdpq_enable, " Allocate reply queue in chunks for large queue depth enable/disable Default: disable(0)");
unsigned int dual_qdepth_disable;
module_param(dual_qdepth_disable, int, S_IRUGO);
MODULE_PARM_DESC(dual_qdepth_disable, "Disable dual queue depth feature. Default: 0");
unsigned int scmd_timeout = MEGASAS_DEFAULT_CMD_TIMEOUT;
module_param(scmd_timeout, int, S_IRUGO);
MODULE_PARM_DESC(scmd_timeout, "scsi command timeout (10-90s), default 90s. See megasas_reset_timer.");
MODULE_LICENSE("GPL");
MODULE_VERSION(MEGASAS_VERSION);
MODULE_AUTHOR("megaraidlinux.pdl@avagotech.com");
MODULE_DESCRIPTION("Avago MegaRAID SAS Driver");
int megasas_transition_to_ready(struct megasas_instance *instance, int ocr);
static int megasas_get_pd_list(struct megasas_instance *instance);
static int megasas_ld_list_query(struct megasas_instance *instance,
u8 query_type);
static int megasas_issue_init_mfi(struct megasas_instance *instance);
static int megasas_register_aen(struct megasas_instance *instance,
u32 seq_num, u32 class_locale_word);
static void megasas_get_pd_info(struct megasas_instance *instance,
struct scsi_device *sdev);
static int megasas_get_target_prop(struct megasas_instance *instance,
struct scsi_device *sdev);
/*
* PCI ID table for all supported controllers
*/
static struct pci_device_id megasas_pci_table[] = {
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064R)},
/* xscale IOP */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078R)},
/* ppc IOP */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)},
/* ppc IOP */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)},
/* gen2*/
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
/* gen2*/
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0073SKINNY)},
/* skinny*/
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0071SKINNY)},
/* skinny*/
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
/* xscale IOP, vega */
{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
/* xscale IOP */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FUSION)},
/* Fusion */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_PLASMA)},
/* Plasma */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_INVADER)},
/* Invader */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FURY)},
/* Fury */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_INTRUDER)},
/* Intruder */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_INTRUDER_24)},
/* Intruder 24 port*/
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CUTLASS_52)},
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CUTLASS_53)},
/* VENTURA */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VENTURA)},
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_HARPOON)},
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_TOMCAT)},
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VENTURA_4PORT)},
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CRUSADER_4PORT)},
{}
};
MODULE_DEVICE_TABLE(pci, megasas_pci_table);
static int megasas_mgmt_majorno;
struct megasas_mgmt_info megasas_mgmt_info;
static struct fasync_struct *megasas_async_queue;
static DEFINE_MUTEX(megasas_async_queue_mutex);
static int megasas_poll_wait_aen;
static DECLARE_WAIT_QUEUE_HEAD(megasas_poll_wait);
static u32 support_poll_for_event;
u32 megasas_dbg_lvl;
static u32 support_device_change;
/* define lock for aen poll */
spinlock_t poll_aen_lock;
void
megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
u8 alt_status);
static u32
megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs);
static int
megasas_adp_reset_gen2(struct megasas_instance *instance,
struct megasas_register_set __iomem *reg_set);
static irqreturn_t megasas_isr(int irq, void *devp);
static u32
megasas_init_adapter_mfi(struct megasas_instance *instance);
u32
megasas_build_and_issue_cmd(struct megasas_instance *instance,
struct scsi_cmnd *scmd);
static void megasas_complete_cmd_dpc(unsigned long instance_addr);
int
wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd,
int seconds);
void megasas_fusion_ocr_wq(struct work_struct *work);
static int megasas_get_ld_vf_affiliation(struct megasas_instance *instance,
int initial);
void
megasas_issue_dcmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
{
instance->instancet->fire_cmd(instance,
cmd->frame_phys_addr, 0, instance->reg_set);
return;
}
/**
* megasas_get_cmd - Get a command from the free pool
* @instance: Adapter soft state
*
* Returns a free command from the pool
*/
struct megasas_cmd *megasas_get_cmd(struct megasas_instance
*instance)
{
unsigned long flags;
struct megasas_cmd *cmd = NULL;
spin_lock_irqsave(&instance->mfi_pool_lock, flags);
if (!list_empty(&instance->cmd_pool)) {
cmd = list_entry((&instance->cmd_pool)->next,
struct megasas_cmd, list);
list_del_init(&cmd->list);
} else {
dev_err(&instance->pdev->dev, "Command pool empty!\n");
}
spin_unlock_irqrestore(&instance->mfi_pool_lock, flags);
return cmd;
}
/**
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
* megasas_return_cmd - Return a cmd to free command pool
* @instance: Adapter soft state
* @cmd: Command packet to be returned to free command pool
*/
void
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
{
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
unsigned long flags;
u32 blk_tags;
struct megasas_cmd_fusion *cmd_fusion;
struct fusion_context *fusion = instance->ctrl_context;
/* This flag is used only for fusion adapter.
* Wait for Interrupt for Polled mode DCMD
*/
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
if (cmd->flags & DRV_DCMD_POLLED_MODE)
return;
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
spin_lock_irqsave(&instance->mfi_pool_lock, flags);
if (fusion) {
blk_tags = instance->max_scsi_cmds + cmd->index;
cmd_fusion = fusion->cmd_list[blk_tags];
megasas_return_cmd_fusion(instance, cmd_fusion);
}
cmd->scmd = NULL;
cmd->frame_count = 0;
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
cmd->flags = 0;
memset(cmd->frame, 0, instance->mfi_frame_size);
cmd->frame->io.context = cpu_to_le32(cmd->index);
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
if (!fusion && reset_devices)
cmd->frame->hdr.cmd = MFI_CMD_INVALID;
list_add(&cmd->list, (&instance->cmd_pool)->next);
spin_unlock_irqrestore(&instance->mfi_pool_lock, flags);
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
}
static const char *
format_timestamp(uint32_t timestamp)
{
static char buffer[32];
if ((timestamp & 0xff000000) == 0xff000000)
snprintf(buffer, sizeof(buffer), "boot + %us", timestamp &
0x00ffffff);
else
snprintf(buffer, sizeof(buffer), "%us", timestamp);
return buffer;
}
static const char *
format_class(int8_t class)
{
static char buffer[6];
switch (class) {
case MFI_EVT_CLASS_DEBUG:
return "debug";
case MFI_EVT_CLASS_PROGRESS:
return "progress";
case MFI_EVT_CLASS_INFO:
return "info";
case MFI_EVT_CLASS_WARNING:
return "WARN";
case MFI_EVT_CLASS_CRITICAL:
return "CRIT";
case MFI_EVT_CLASS_FATAL:
return "FATAL";
case MFI_EVT_CLASS_DEAD:
return "DEAD";
default:
snprintf(buffer, sizeof(buffer), "%d", class);
return buffer;
}
}
/**
* megasas_decode_evt: Decode FW AEN event and print critical event
* for information.
* @instance: Adapter soft state
*/
static void
megasas_decode_evt(struct megasas_instance *instance)
{
struct megasas_evt_detail *evt_detail = instance->evt_detail;
union megasas_evt_class_locale class_locale;
class_locale.word = le32_to_cpu(evt_detail->cl.word);
if (class_locale.members.class >= MFI_EVT_CLASS_CRITICAL)
dev_info(&instance->pdev->dev, "%d (%s/0x%04x/%s) - %s\n",
le32_to_cpu(evt_detail->seq_num),
format_timestamp(le32_to_cpu(evt_detail->time_stamp)),
(class_locale.members.locale),
format_class(class_locale.members.class),
evt_detail->description);
}
/**
* The following functions are defined for xscale
* (deviceid : 1064R, PERC5) controllers
*/
/**
* megasas_enable_intr_xscale - Enables interrupts
* @regs: MFI register set
*/
static inline void
megasas_enable_intr_xscale(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *regs;
regs = instance->reg_set;
writel(0, &(regs)->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
}
/**
* megasas_disable_intr_xscale -Disables interrupt
* @regs: MFI register set
*/
static inline void
megasas_disable_intr_xscale(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *regs;
u32 mask = 0x1f;
regs = instance->reg_set;
writel(mask, &regs->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
}
/**
* megasas_read_fw_status_reg_xscale - returns the current FW status value
* @regs: MFI register set
*/
static u32
megasas_read_fw_status_reg_xscale(struct megasas_register_set __iomem * regs)
{
return readl(&(regs)->outbound_msg_0);
}
/**
* megasas_clear_interrupt_xscale - Check & clear interrupt
* @regs: MFI register set
*/
static int
megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
{
u32 status;
u32 mfiStatus = 0;
/*
* Check if it is our interrupt
*/
status = readl(&regs->outbound_intr_status);
if (status & MFI_OB_INTR_STATUS_MASK)
mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
if (status & MFI_XSCALE_OMR0_CHANGE_INTERRUPT)
mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
/*
* Clear the interrupt by writing back the same value
*/
if (mfiStatus)
writel(status, &regs->outbound_intr_status);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_status);
return mfiStatus;
}
/**
* megasas_fire_cmd_xscale - Sends command to the FW
* @frame_phys_addr : Physical address of cmd
* @frame_count : Number of frames for the command
* @regs : MFI register set
*/
static inline void
megasas_fire_cmd_xscale(struct megasas_instance *instance,
dma_addr_t frame_phys_addr,
u32 frame_count,
struct megasas_register_set __iomem *regs)
{
unsigned long flags;
spin_lock_irqsave(&instance->hba_lock, flags);
writel((frame_phys_addr >> 3)|(frame_count),
&(regs)->inbound_queue_port);
spin_unlock_irqrestore(&instance->hba_lock, flags);
}
/**
* megasas_adp_reset_xscale - For controller reset
* @regs: MFI register set
*/
static int
megasas_adp_reset_xscale(struct megasas_instance *instance,
struct megasas_register_set __iomem *regs)
{
u32 i;
u32 pcidata;
writel(MFI_ADP_RESET, &regs->inbound_doorbell);
for (i = 0; i < 3; i++)
msleep(1000); /* sleep for 3 secs */
pcidata = 0;
pci_read_config_dword(instance->pdev, MFI_1068_PCSR_OFFSET, &pcidata);
dev_notice(&instance->pdev->dev, "pcidata = %x\n", pcidata);
if (pcidata & 0x2) {
dev_notice(&instance->pdev->dev, "mfi 1068 offset read=%x\n", pcidata);
pcidata &= ~0x2;
pci_write_config_dword(instance->pdev,
MFI_1068_PCSR_OFFSET, pcidata);
for (i = 0; i < 2; i++)
msleep(1000); /* need to wait 2 secs again */
pcidata = 0;
pci_read_config_dword(instance->pdev,
MFI_1068_FW_HANDSHAKE_OFFSET, &pcidata);
dev_notice(&instance->pdev->dev, "1068 offset handshake read=%x\n", pcidata);
if ((pcidata & 0xffff0000) == MFI_1068_FW_READY) {
dev_notice(&instance->pdev->dev, "1068 offset pcidt=%x\n", pcidata);
pcidata = 0;
pci_write_config_dword(instance->pdev,
MFI_1068_FW_HANDSHAKE_OFFSET, pcidata);
}
}
return 0;
}
/**
* megasas_check_reset_xscale - For controller reset check
* @regs: MFI register set
*/
static int
megasas_check_reset_xscale(struct megasas_instance *instance,
struct megasas_register_set __iomem *regs)
{
if ((atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) &&
(le32_to_cpu(*instance->consumer) ==
MEGASAS_ADPRESET_INPROG_SIGN))
return 1;
return 0;
}
static struct megasas_instance_template megasas_instance_template_xscale = {
.fire_cmd = megasas_fire_cmd_xscale,
.enable_intr = megasas_enable_intr_xscale,
.disable_intr = megasas_disable_intr_xscale,
.clear_intr = megasas_clear_intr_xscale,
.read_fw_status_reg = megasas_read_fw_status_reg_xscale,
.adp_reset = megasas_adp_reset_xscale,
.check_reset = megasas_check_reset_xscale,
.service_isr = megasas_isr,
.tasklet = megasas_complete_cmd_dpc,
.init_adapter = megasas_init_adapter_mfi,
.build_and_issue_cmd = megasas_build_and_issue_cmd,
.issue_dcmd = megasas_issue_dcmd,
};
/**
* This is the end of set of functions & definitions specific
* to xscale (deviceid : 1064R, PERC5) controllers
*/
/**
* The following functions are defined for ppc (deviceid : 0x60)
* controllers
*/
/**
* megasas_enable_intr_ppc - Enables interrupts
* @regs: MFI register set
*/
static inline void
megasas_enable_intr_ppc(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *regs;
regs = instance->reg_set;
writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
writel(~0x80000000, &(regs)->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
}
/**
* megasas_disable_intr_ppc - Disable interrupt
* @regs: MFI register set
*/
static inline void
megasas_disable_intr_ppc(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *regs;
u32 mask = 0xFFFFFFFF;
regs = instance->reg_set;
writel(mask, &regs->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
}
/**
* megasas_read_fw_status_reg_ppc - returns the current FW status value
* @regs: MFI register set
*/
static u32
megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs)
{
return readl(&(regs)->outbound_scratch_pad);
}
/**
* megasas_clear_interrupt_ppc - Check & clear interrupt
* @regs: MFI register set
*/
static int
megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
{
u32 status, mfiStatus = 0;
/*
* Check if it is our interrupt
*/
status = readl(&regs->outbound_intr_status);
if (status & MFI_REPLY_1078_MESSAGE_INTERRUPT)
mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
if (status & MFI_G2_OUTBOUND_DOORBELL_CHANGE_INTERRUPT)
mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
/*
* Clear the interrupt by writing back the same value
*/
writel(status, &regs->outbound_doorbell_clear);
/* Dummy readl to force pci flush */
readl(&regs->outbound_doorbell_clear);
return mfiStatus;
}
/**
* megasas_fire_cmd_ppc - Sends command to the FW
* @frame_phys_addr : Physical address of cmd
* @frame_count : Number of frames for the command
* @regs : MFI register set
*/
static inline void
megasas_fire_cmd_ppc(struct megasas_instance *instance,
dma_addr_t frame_phys_addr,
u32 frame_count,
struct megasas_register_set __iomem *regs)
{
unsigned long flags;
spin_lock_irqsave(&instance->hba_lock, flags);
writel((frame_phys_addr | (frame_count<<1))|1,
&(regs)->inbound_queue_port);
spin_unlock_irqrestore(&instance->hba_lock, flags);
}
/**
* megasas_check_reset_ppc - For controller reset check
* @regs: MFI register set
*/
static int
megasas_check_reset_ppc(struct megasas_instance *instance,
struct megasas_register_set __iomem *regs)
{
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL)
return 1;
return 0;
}
static struct megasas_instance_template megasas_instance_template_ppc = {
.fire_cmd = megasas_fire_cmd_ppc,
.enable_intr = megasas_enable_intr_ppc,
.disable_intr = megasas_disable_intr_ppc,
.clear_intr = megasas_clear_intr_ppc,
.read_fw_status_reg = megasas_read_fw_status_reg_ppc,
.adp_reset = megasas_adp_reset_xscale,
.check_reset = megasas_check_reset_ppc,
.service_isr = megasas_isr,
.tasklet = megasas_complete_cmd_dpc,
.init_adapter = megasas_init_adapter_mfi,
.build_and_issue_cmd = megasas_build_and_issue_cmd,
.issue_dcmd = megasas_issue_dcmd,
};
/**
* megasas_enable_intr_skinny - Enables interrupts
* @regs: MFI register set
*/
static inline void
megasas_enable_intr_skinny(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *regs;
regs = instance->reg_set;
writel(0xFFFFFFFF, &(regs)->outbound_intr_mask);
writel(~MFI_SKINNY_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
}
/**
* megasas_disable_intr_skinny - Disables interrupt
* @regs: MFI register set
*/
static inline void
megasas_disable_intr_skinny(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *regs;
u32 mask = 0xFFFFFFFF;
regs = instance->reg_set;
writel(mask, &regs->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
}
/**
* megasas_read_fw_status_reg_skinny - returns the current FW status value
* @regs: MFI register set
*/
static u32
megasas_read_fw_status_reg_skinny(struct megasas_register_set __iomem *regs)
{
return readl(&(regs)->outbound_scratch_pad);
}
/**
* megasas_clear_interrupt_skinny - Check & clear interrupt
* @regs: MFI register set
*/
static int
megasas_clear_intr_skinny(struct megasas_register_set __iomem *regs)
{
u32 status;
u32 mfiStatus = 0;
/*
* Check if it is our interrupt
*/
status = readl(&regs->outbound_intr_status);
if (!(status & MFI_SKINNY_ENABLE_INTERRUPT_MASK)) {
return 0;
}
/*
* Check if it is our interrupt
*/
if ((megasas_read_fw_status_reg_skinny(regs) & MFI_STATE_MASK) ==
MFI_STATE_FAULT) {
mfiStatus = MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
} else
mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
/*
* Clear the interrupt by writing back the same value
*/
writel(status, &regs->outbound_intr_status);
/*
* dummy read to flush PCI
*/
readl(&regs->outbound_intr_status);
return mfiStatus;
}
/**
* megasas_fire_cmd_skinny - Sends command to the FW
* @frame_phys_addr : Physical address of cmd
* @frame_count : Number of frames for the command
* @regs : MFI register set
*/
static inline void
megasas_fire_cmd_skinny(struct megasas_instance *instance,
dma_addr_t frame_phys_addr,
u32 frame_count,
struct megasas_register_set __iomem *regs)
{
unsigned long flags;
spin_lock_irqsave(&instance->hba_lock, flags);
writel(upper_32_bits(frame_phys_addr),
&(regs)->inbound_high_queue_port);
writel((lower_32_bits(frame_phys_addr) | (frame_count<<1))|1,
&(regs)->inbound_low_queue_port);
mmiowb();
spin_unlock_irqrestore(&instance->hba_lock, flags);
}
/**
* megasas_check_reset_skinny - For controller reset check
* @regs: MFI register set
*/
static int
megasas_check_reset_skinny(struct megasas_instance *instance,
struct megasas_register_set __iomem *regs)
{
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL)
return 1;
return 0;
}
static struct megasas_instance_template megasas_instance_template_skinny = {
.fire_cmd = megasas_fire_cmd_skinny,
.enable_intr = megasas_enable_intr_skinny,
.disable_intr = megasas_disable_intr_skinny,
.clear_intr = megasas_clear_intr_skinny,
.read_fw_status_reg = megasas_read_fw_status_reg_skinny,
.adp_reset = megasas_adp_reset_gen2,
.check_reset = megasas_check_reset_skinny,
.service_isr = megasas_isr,
.tasklet = megasas_complete_cmd_dpc,
.init_adapter = megasas_init_adapter_mfi,
.build_and_issue_cmd = megasas_build_and_issue_cmd,
.issue_dcmd = megasas_issue_dcmd,
};
/**
* The following functions are defined for gen2 (deviceid : 0x78 0x79)
* controllers
*/
/**
* megasas_enable_intr_gen2 - Enables interrupts
* @regs: MFI register set
*/
static inline void
megasas_enable_intr_gen2(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *regs;
regs = instance->reg_set;
writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
/* write ~0x00000005 (4 & 1) to the intr mask*/
writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
}
/**
* megasas_disable_intr_gen2 - Disables interrupt
* @regs: MFI register set
*/
static inline void
megasas_disable_intr_gen2(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *regs;
u32 mask = 0xFFFFFFFF;
regs = instance->reg_set;
writel(mask, &regs->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
}
/**
* megasas_read_fw_status_reg_gen2 - returns the current FW status value
* @regs: MFI register set
*/
static u32
megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs)
{
return readl(&(regs)->outbound_scratch_pad);
}
/**
* megasas_clear_interrupt_gen2 - Check & clear interrupt
* @regs: MFI register set
*/
static int
megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
{
u32 status;
u32 mfiStatus = 0;
/*
* Check if it is our interrupt
*/
status = readl(&regs->outbound_intr_status);
if (status & MFI_INTR_FLAG_REPLY_MESSAGE) {
mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
}
if (status & MFI_G2_OUTBOUND_DOORBELL_CHANGE_INTERRUPT) {
mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
}
/*
* Clear the interrupt by writing back the same value
*/
if (mfiStatus)
writel(status, &regs->outbound_doorbell_clear);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_status);
return mfiStatus;
}
/**
* megasas_fire_cmd_gen2 - Sends command to the FW
* @frame_phys_addr : Physical address of cmd
* @frame_count : Number of frames for the command
* @regs : MFI register set
*/
static inline void
megasas_fire_cmd_gen2(struct megasas_instance *instance,
dma_addr_t frame_phys_addr,
u32 frame_count,
struct megasas_register_set __iomem *regs)
{
unsigned long flags;
spin_lock_irqsave(&instance->hba_lock, flags);
writel((frame_phys_addr | (frame_count<<1))|1,
&(regs)->inbound_queue_port);
spin_unlock_irqrestore(&instance->hba_lock, flags);
}
/**
* megasas_adp_reset_gen2 - For controller reset
* @regs: MFI register set
*/
static int
megasas_adp_reset_gen2(struct megasas_instance *instance,
struct megasas_register_set __iomem *reg_set)
{
u32 retry = 0 ;
u32 HostDiag;
u32 __iomem *seq_offset = &reg_set->seq_offset;
u32 __iomem *hostdiag_offset = &reg_set->host_diag;
if (instance->instancet == &megasas_instance_template_skinny) {
seq_offset = &reg_set->fusion_seq_offset;
hostdiag_offset = &reg_set->fusion_host_diag;
}
writel(0, seq_offset);
writel(4, seq_offset);
writel(0xb, seq_offset);
writel(2, seq_offset);
writel(7, seq_offset);
writel(0xd, seq_offset);
msleep(1000);
HostDiag = (u32)readl(hostdiag_offset);
while (!(HostDiag & DIAG_WRITE_ENABLE)) {
msleep(100);
HostDiag = (u32)readl(hostdiag_offset);
dev_notice(&instance->pdev->dev, "RESETGEN2: retry=%x, hostdiag=%x\n",
retry, HostDiag);
if (retry++ >= 100)
return 1;
}
dev_notice(&instance->pdev->dev, "ADP_RESET_GEN2: HostDiag=%x\n", HostDiag);
writel((HostDiag | DIAG_RESET_ADAPTER), hostdiag_offset);
ssleep(10);
HostDiag = (u32)readl(hostdiag_offset);
while (HostDiag & DIAG_RESET_ADAPTER) {
msleep(100);
HostDiag = (u32)readl(hostdiag_offset);
dev_notice(&instance->pdev->dev, "RESET_GEN2: retry=%x, hostdiag=%x\n",
retry, HostDiag);
if (retry++ >= 1000)
return 1;
}
return 0;
}
/**
* megasas_check_reset_gen2 - For controller reset check
* @regs: MFI register set
*/
static int
megasas_check_reset_gen2(struct megasas_instance *instance,
struct megasas_register_set __iomem *regs)
{
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL)
return 1;
return 0;
}
static struct megasas_instance_template megasas_instance_template_gen2 = {
.fire_cmd = megasas_fire_cmd_gen2,
.enable_intr = megasas_enable_intr_gen2,
.disable_intr = megasas_disable_intr_gen2,
.clear_intr = megasas_clear_intr_gen2,
.read_fw_status_reg = megasas_read_fw_status_reg_gen2,
.adp_reset = megasas_adp_reset_gen2,
.check_reset = megasas_check_reset_gen2,
.service_isr = megasas_isr,
.tasklet = megasas_complete_cmd_dpc,
.init_adapter = megasas_init_adapter_mfi,
.build_and_issue_cmd = megasas_build_and_issue_cmd,
.issue_dcmd = megasas_issue_dcmd,
};
/**
* This is the end of set of functions & definitions
* specific to gen2 (deviceid : 0x78, 0x79) controllers
*/
/*
* Template added for TB (Fusion)
*/
extern struct megasas_instance_template megasas_instance_template_fusion;
/**
* megasas_issue_polled - Issues a polling command
* @instance: Adapter soft state
* @cmd: Command packet to be issued
*
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
* For polling, MFI requires the cmd_status to be set to MFI_STAT_INVALID_STATUS before posting.
*/
int
megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd)
{
struct megasas_header *frame_hdr = &cmd->frame->hdr;
frame_hdr->cmd_status = MFI_STAT_INVALID_STATUS;
frame_hdr->flags |= cpu_to_le16(MFI_FRAME_DONT_POST_IN_REPLY_QUEUE);
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
__func__, __LINE__);
return DCMD_NOT_FIRED;
}
instance->instancet->issue_dcmd(instance, cmd);
return wait_and_poll(instance, cmd, instance->requestorId ?
MEGASAS_ROUTINE_WAIT_TIME_VF : MFI_IO_TIMEOUT_SECS);
}
/**
* megasas_issue_blocked_cmd - Synchronous wrapper around regular FW cmds
* @instance: Adapter soft state
* @cmd: Command to be issued
* @timeout: Timeout in seconds
*
* This function waits on an event for the command to be returned from ISR.
* Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
* Used to issue ioctl commands.
*/
int
megasas_issue_blocked_cmd(struct megasas_instance *instance,
struct megasas_cmd *cmd, int timeout)
{
int ret = 0;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
cmd->cmd_status_drv = MFI_STAT_INVALID_STATUS;
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
__func__, __LINE__);
return DCMD_NOT_FIRED;
}
instance->instancet->issue_dcmd(instance, cmd);
if (timeout) {
ret = wait_event_timeout(instance->int_cmd_wait_q,
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
cmd->cmd_status_drv != MFI_STAT_INVALID_STATUS, timeout * HZ);
if (!ret) {
dev_err(&instance->pdev->dev, "Failed from %s %d DCMD Timed out\n",
__func__, __LINE__);
return DCMD_TIMEOUT;
}
} else
wait_event(instance->int_cmd_wait_q,
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
cmd->cmd_status_drv != MFI_STAT_INVALID_STATUS);
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
return (cmd->cmd_status_drv == MFI_STAT_OK) ?
DCMD_SUCCESS : DCMD_FAILED;
}
/**
* megasas_issue_blocked_abort_cmd - Aborts previously issued cmd
* @instance: Adapter soft state
* @cmd_to_abort: Previously issued cmd to be aborted
* @timeout: Timeout in seconds
*
* MFI firmware can abort previously issued AEN comamnd (automatic event
* notification). The megasas_issue_blocked_abort_cmd() issues such abort
* cmd and waits for return status.
* Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
*/
static int
megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
struct megasas_cmd *cmd_to_abort, int timeout)
{
struct megasas_cmd *cmd;
struct megasas_abort_frame *abort_fr;
int ret = 0;
cmd = megasas_get_cmd(instance);
if (!cmd)
return -1;
abort_fr = &cmd->frame->abort;
/*
* Prepare and issue the abort frame
*/
abort_fr->cmd = MFI_CMD_ABORT;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
abort_fr->cmd_status = MFI_STAT_INVALID_STATUS;
abort_fr->flags = cpu_to_le16(0);
abort_fr->abort_context = cpu_to_le32(cmd_to_abort->index);
abort_fr->abort_mfi_phys_addr_lo =
cpu_to_le32(lower_32_bits(cmd_to_abort->frame_phys_addr));
abort_fr->abort_mfi_phys_addr_hi =
cpu_to_le32(upper_32_bits(cmd_to_abort->frame_phys_addr));
cmd->sync_cmd = 1;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
cmd->cmd_status_drv = MFI_STAT_INVALID_STATUS;
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
__func__, __LINE__);
return DCMD_NOT_FIRED;
}
instance->instancet->issue_dcmd(instance, cmd);
if (timeout) {
ret = wait_event_timeout(instance->abort_cmd_wait_q,
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
cmd->cmd_status_drv != MFI_STAT_INVALID_STATUS, timeout * HZ);
if (!ret) {
dev_err(&instance->pdev->dev, "Failed from %s %d Abort Timed out\n",
__func__, __LINE__);
return DCMD_TIMEOUT;
}
} else
wait_event(instance->abort_cmd_wait_q,
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
cmd->cmd_status_drv != MFI_STAT_INVALID_STATUS);
cmd->sync_cmd = 0;
megasas_return_cmd(instance, cmd);
return (cmd->cmd_status_drv == MFI_STAT_OK) ?
DCMD_SUCCESS : DCMD_FAILED;
}
/**
* megasas_make_sgl32 - Prepares 32-bit SGL
* @instance: Adapter soft state
* @scp: SCSI command from the mid-layer
* @mfi_sgl: SGL to be filled in
*
* If successful, this function returns the number of SG elements. Otherwise,
* it returnes -1.
*/
static int
megasas_make_sgl32(struct megasas_instance *instance, struct scsi_cmnd *scp,
union megasas_sgl *mfi_sgl)
{
int i;
int sge_count;
struct scatterlist *os_sgl;
sge_count = scsi_dma_map(scp);
BUG_ON(sge_count < 0);
if (sge_count) {
scsi_for_each_sg(scp, os_sgl, sge_count, i) {
mfi_sgl->sge32[i].length = cpu_to_le32(sg_dma_len(os_sgl));
mfi_sgl->sge32[i].phys_addr = cpu_to_le32(sg_dma_address(os_sgl));
}
}
return sge_count;
}
/**
* megasas_make_sgl64 - Prepares 64-bit SGL
* @instance: Adapter soft state
* @scp: SCSI command from the mid-layer
* @mfi_sgl: SGL to be filled in
*
* If successful, this function returns the number of SG elements. Otherwise,
* it returnes -1.
*/
static int
megasas_make_sgl64(struct megasas_instance *instance, struct scsi_cmnd *scp,
union megasas_sgl *mfi_sgl)
{
int i;
int sge_count;
struct scatterlist *os_sgl;
sge_count = scsi_dma_map(scp);
BUG_ON(sge_count < 0);
if (sge_count) {
scsi_for_each_sg(scp, os_sgl, sge_count, i) {
mfi_sgl->sge64[i].length = cpu_to_le32(sg_dma_len(os_sgl));
mfi_sgl->sge64[i].phys_addr = cpu_to_le64(sg_dma_address(os_sgl));
}
}
return sge_count;
}
/**
* megasas_make_sgl_skinny - Prepares IEEE SGL
* @instance: Adapter soft state
* @scp: SCSI command from the mid-layer
* @mfi_sgl: SGL to be filled in
*
* If successful, this function returns the number of SG elements. Otherwise,
* it returnes -1.
*/
static int
megasas_make_sgl_skinny(struct megasas_instance *instance,
struct scsi_cmnd *scp, union megasas_sgl *mfi_sgl)
{
int i;
int sge_count;
struct scatterlist *os_sgl;
sge_count = scsi_dma_map(scp);
if (sge_count) {
scsi_for_each_sg(scp, os_sgl, sge_count, i) {
mfi_sgl->sge_skinny[i].length =
cpu_to_le32(sg_dma_len(os_sgl));
mfi_sgl->sge_skinny[i].phys_addr =
cpu_to_le64(sg_dma_address(os_sgl));
mfi_sgl->sge_skinny[i].flag = cpu_to_le32(0);
}
}
return sge_count;
}
/**
* megasas_get_frame_count - Computes the number of frames
* @frame_type : type of frame- io or pthru frame
* @sge_count : number of sg elements
*
* Returns the number of frames required for numnber of sge's (sge_count)
*/
static u32 megasas_get_frame_count(struct megasas_instance *instance,
u8 sge_count, u8 frame_type)
{
int num_cnt;
int sge_bytes;
u32 sge_sz;
u32 frame_count = 0;
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
sizeof(struct megasas_sge32);
if (instance->flag_ieee) {
sge_sz = sizeof(struct megasas_sge_skinny);
}
/*
* Main frame can contain 2 SGEs for 64-bit SGLs and
* 3 SGEs for 32-bit SGLs for ldio &
* 1 SGEs for 64-bit SGLs and
* 2 SGEs for 32-bit SGLs for pthru frame
*/
if (unlikely(frame_type == PTHRU_FRAME)) {
if (instance->flag_ieee == 1) {
num_cnt = sge_count - 1;
} else if (IS_DMA64)
num_cnt = sge_count - 1;
else
num_cnt = sge_count - 2;
} else {
if (instance->flag_ieee == 1) {
num_cnt = sge_count - 1;
} else if (IS_DMA64)
num_cnt = sge_count - 2;
else
num_cnt = sge_count - 3;
}
if (num_cnt > 0) {
sge_bytes = sge_sz * num_cnt;
frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) ;
}
/* Main frame */
frame_count += 1;
if (frame_count > 7)
frame_count = 8;
return frame_count;
}
/**
* megasas_build_dcdb - Prepares a direct cdb (DCDB) command
* @instance: Adapter soft state
* @scp: SCSI command
* @cmd: Command to be prepared in
*
* This function prepares CDB commands. These are typcially pass-through
* commands to the devices.
*/
static int
megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
struct megasas_cmd *cmd)
{
u32 is_logical;
u32 device_id;
u16 flags = 0;
struct megasas_pthru_frame *pthru;
is_logical = MEGASAS_IS_LOGICAL(scp->device);
device_id = MEGASAS_DEV_INDEX(scp);
pthru = (struct megasas_pthru_frame *)cmd->frame;
if (scp->sc_data_direction == PCI_DMA_TODEVICE)
flags = MFI_FRAME_DIR_WRITE;
else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
flags = MFI_FRAME_DIR_READ;
else if (scp->sc_data_direction == PCI_DMA_NONE)
flags = MFI_FRAME_DIR_NONE;
if (instance->flag_ieee == 1) {
flags |= MFI_FRAME_IEEE;
}
/*
* Prepare the DCDB frame
*/
pthru->cmd = (is_logical) ? MFI_CMD_LD_SCSI_IO : MFI_CMD_PD_SCSI_IO;
pthru->cmd_status = 0x0;
pthru->scsi_status = 0x0;
pthru->target_id = device_id;
pthru->lun = scp->device->lun;
pthru->cdb_len = scp->cmd_len;
pthru->timeout = 0;
pthru->pad_0 = 0;
pthru->flags = cpu_to_le16(flags);
pthru->data_xfer_len = cpu_to_le32(scsi_bufflen(scp));
memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
/*
* If the command is for the tape device, set the
* pthru timeout to the os layer timeout value.
*/
if (scp->device->type == TYPE_TAPE) {
if ((scp->request->timeout / HZ) > 0xFFFF)
pthru->timeout = cpu_to_le16(0xFFFF);
else
pthru->timeout = cpu_to_le16(scp->request->timeout / HZ);
}
/*
* Construct SGL
*/
if (instance->flag_ieee == 1) {
pthru->flags |= cpu_to_le16(MFI_FRAME_SGL64);
pthru->sge_count = megasas_make_sgl_skinny(instance, scp,
&pthru->sgl);
} else if (IS_DMA64) {
pthru->flags |= cpu_to_le16(MFI_FRAME_SGL64);
pthru->sge_count = megasas_make_sgl64(instance, scp,
&pthru->sgl);
} else
pthru->sge_count = megasas_make_sgl32(instance, scp,
&pthru->sgl);
if (pthru->sge_count > instance->max_num_sge) {
dev_err(&instance->pdev->dev, "DCDB too many SGE NUM=%x\n",
pthru->sge_count);
return 0;
}
/*
* Sense info specific
*/
pthru->sense_len = SCSI_SENSE_BUFFERSIZE;
pthru->sense_buf_phys_addr_hi =
cpu_to_le32(upper_32_bits(cmd->sense_phys_addr));
pthru->sense_buf_phys_addr_lo =
cpu_to_le32(lower_32_bits(cmd->sense_phys_addr));
/*
* Compute the total number of frames this command consumes. FW uses
* this number to pull sufficient number of frames from host memory.
*/
cmd->frame_count = megasas_get_frame_count(instance, pthru->sge_count,
PTHRU_FRAME);
return cmd->frame_count;
}
/**
* megasas_build_ldio - Prepares IOs to logical devices
* @instance: Adapter soft state
* @scp: SCSI command
* @cmd: Command to be prepared
*
* Frames (and accompanying SGLs) for regular SCSI IOs use this function.
*/
static int
megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
struct megasas_cmd *cmd)
{
u32 device_id;
u8 sc = scp->cmnd[0];
u16 flags = 0;
struct megasas_io_frame *ldio;
device_id = MEGASAS_DEV_INDEX(scp);
ldio = (struct megasas_io_frame *)cmd->frame;
if (scp->sc_data_direction == PCI_DMA_TODEVICE)
flags = MFI_FRAME_DIR_WRITE;
else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
flags = MFI_FRAME_DIR_READ;
if (instance->flag_ieee == 1) {
flags |= MFI_FRAME_IEEE;
}
/*
* Prepare the Logical IO frame: 2nd bit is zero for all read cmds
*/
ldio->cmd = (sc & 0x02) ? MFI_CMD_LD_WRITE : MFI_CMD_LD_READ;
ldio->cmd_status = 0x0;
ldio->scsi_status = 0x0;
ldio->target_id = device_id;
ldio->timeout = 0;
ldio->reserved_0 = 0;
ldio->pad_0 = 0;
ldio->flags = cpu_to_le16(flags);
ldio->start_lba_hi = 0;
ldio->access_byte = (scp->cmd_len != 6) ? scp->cmnd[1] : 0;
/*
* 6-byte READ(0x08) or WRITE(0x0A) cdb
*/
if (scp->cmd_len == 6) {
ldio->lba_count = cpu_to_le32((u32) scp->cmnd[4]);
ldio->start_lba_lo = cpu_to_le32(((u32) scp->cmnd[1] << 16) |
((u32) scp->cmnd[2] << 8) |
(u32) scp->cmnd[3]);
ldio->start_lba_lo &= cpu_to_le32(0x1FFFFF);
}
/*
* 10-byte READ(0x28) or WRITE(0x2A) cdb
*/
else if (scp->cmd_len == 10) {
ldio->lba_count = cpu_to_le32((u32) scp->cmnd[8] |
((u32) scp->cmnd[7] << 8));
ldio->start_lba_lo = cpu_to_le32(((u32) scp->cmnd[2] << 24) |
((u32) scp->cmnd[3] << 16) |
((u32) scp->cmnd[4] << 8) |
(u32) scp->cmnd[5]);
}
/*
* 12-byte READ(0xA8) or WRITE(0xAA) cdb
*/
else if (scp->cmd_len == 12) {
ldio->lba_count = cpu_to_le32(((u32) scp->cmnd[6] << 24) |
((u32) scp->cmnd[7] << 16) |
((u32) scp->cmnd[8] << 8) |
(u32) scp->cmnd[9]);
ldio->start_lba_lo = cpu_to_le32(((u32) scp->cmnd[2] << 24) |
((u32) scp->cmnd[3] << 16) |
((u32) scp->cmnd[4] << 8) |
(u32) scp->cmnd[5]);
}
/*
* 16-byte READ(0x88) or WRITE(0x8A) cdb
*/
else if (scp->cmd_len == 16) {
ldio->lba_count = cpu_to_le32(((u32) scp->cmnd[10] << 24) |
((u32) scp->cmnd[11] << 16) |
((u32) scp->cmnd[12] << 8) |
(u32) scp->cmnd[13]);
ldio->start_lba_lo = cpu_to_le32(((u32) scp->cmnd[6] << 24) |
((u32) scp->cmnd[7] << 16) |
((u32) scp->cmnd[8] << 8) |
(u32) scp->cmnd[9]);
ldio->start_lba_hi = cpu_to_le32(((u32) scp->cmnd[2] << 24) |
((u32) scp->cmnd[3] << 16) |
((u32) scp->cmnd[4] << 8) |
(u32) scp->cmnd[5]);
}
/*
* Construct SGL
*/
if (instance->flag_ieee) {
ldio->flags |= cpu_to_le16(MFI_FRAME_SGL64);
ldio->sge_count = megasas_make_sgl_skinny(instance, scp,
&ldio->sgl);
} else if (IS_DMA64) {
ldio->flags |= cpu_to_le16(MFI_FRAME_SGL64);
ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl);
} else
ldio->sge_count = megasas_make_sgl32(instance, scp, &ldio->sgl);
if (ldio->sge_count > instance->max_num_sge) {
dev_err(&instance->pdev->dev, "build_ld_io: sge_count = %x\n",
ldio->sge_count);
return 0;
}
/*
* Sense info specific
*/
ldio->sense_len = SCSI_SENSE_BUFFERSIZE;
ldio->sense_buf_phys_addr_hi = 0;
ldio->sense_buf_phys_addr_lo = cpu_to_le32(cmd->sense_phys_addr);
/*
* Compute the total number of frames this command consumes. FW uses
* this number to pull sufficient number of frames from host memory.
*/
cmd->frame_count = megasas_get_frame_count(instance,
ldio->sge_count, IO_FRAME);
return cmd->frame_count;
}
/**
* megasas_cmd_type - Checks if the cmd is for logical drive/sysPD
* and whether it's RW or non RW
* @scmd: SCSI command
*
*/
inline int megasas_cmd_type(struct scsi_cmnd *cmd)
{
int ret;
switch (cmd->cmnd[0]) {
case READ_10:
case WRITE_10:
case READ_12:
case WRITE_12:
case READ_6:
case WRITE_6:
case READ_16:
case WRITE_16:
ret = (MEGASAS_IS_LOGICAL(cmd->device)) ?
READ_WRITE_LDIO : READ_WRITE_SYSPDIO;
break;
default:
ret = (MEGASAS_IS_LOGICAL(cmd->device)) ?
NON_READ_WRITE_LDIO : NON_READ_WRITE_SYSPDIO;
}
return ret;
}
/**
* megasas_dump_pending_frames - Dumps the frame address of all pending cmds
* in FW
* @instance: Adapter soft state
*/
static inline void
megasas_dump_pending_frames(struct megasas_instance *instance)
{
struct megasas_cmd *cmd;
int i,n;
union megasas_sgl *mfi_sgl;
struct megasas_io_frame *ldio;
struct megasas_pthru_frame *pthru;
u32 sgcount;
u16 max_cmd = instance->max_fw_cmds;
dev_err(&instance->pdev->dev, "[%d]: Dumping Frame Phys Address of all pending cmds in FW\n",instance->host->host_no);
dev_err(&instance->pdev->dev, "[%d]: Total OS Pending cmds : %d\n",instance->host->host_no,atomic_read(&instance->fw_outstanding));
if (IS_DMA64)
dev_err(&instance->pdev->dev, "[%d]: 64 bit SGLs were sent to FW\n",instance->host->host_no);
else
dev_err(&instance->pdev->dev, "[%d]: 32 bit SGLs were sent to FW\n",instance->host->host_no);
dev_err(&instance->pdev->dev, "[%d]: Pending OS cmds in FW : \n",instance->host->host_no);
for (i = 0; i < max_cmd; i++) {
cmd = instance->cmd_list[i];
if (!cmd->scmd)
continue;
dev_err(&instance->pdev->dev, "[%d]: Frame addr :0x%08lx : ",instance->host->host_no,(unsigned long)cmd->frame_phys_addr);
if (megasas_cmd_type(cmd->scmd) == READ_WRITE_LDIO) {
ldio = (struct megasas_io_frame *)cmd->frame;
mfi_sgl = &ldio->sgl;
sgcount = ldio->sge_count;
dev_err(&instance->pdev->dev, "[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x,"
" lba lo : 0x%x, lba_hi : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",
instance->host->host_no, cmd->frame_count, ldio->cmd, ldio->target_id,
le32_to_cpu(ldio->start_lba_lo), le32_to_cpu(ldio->start_lba_hi),
le32_to_cpu(ldio->sense_buf_phys_addr_lo), sgcount);
} else {
pthru = (struct megasas_pthru_frame *) cmd->frame;
mfi_sgl = &pthru->sgl;
sgcount = pthru->sge_count;
dev_err(&instance->pdev->dev, "[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x, "
"lun : 0x%x, cdb_len : 0x%x, data xfer len : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",
instance->host->host_no, cmd->frame_count, pthru->cmd, pthru->target_id,
pthru->lun, pthru->cdb_len, le32_to_cpu(pthru->data_xfer_len),
le32_to_cpu(pthru->sense_buf_phys_addr_lo), sgcount);
}
if (megasas_dbg_lvl & MEGASAS_DBG_LVL) {
for (n = 0; n < sgcount; n++) {
if (IS_DMA64)
dev_err(&instance->pdev->dev, "sgl len : 0x%x, sgl addr : 0x%llx\n",
le32_to_cpu(mfi_sgl->sge64[n].length),
le64_to_cpu(mfi_sgl->sge64[n].phys_addr));
else
dev_err(&instance->pdev->dev, "sgl len : 0x%x, sgl addr : 0x%x\n",
le32_to_cpu(mfi_sgl->sge32[n].length),
le32_to_cpu(mfi_sgl->sge32[n].phys_addr));
}
}
} /*for max_cmd*/
dev_err(&instance->pdev->dev, "[%d]: Pending Internal cmds in FW : \n",instance->host->host_no);
for (i = 0; i < max_cmd; i++) {
cmd = instance->cmd_list[i];
if (cmd->sync_cmd == 1)
dev_err(&instance->pdev->dev, "0x%08lx : ", (unsigned long)cmd->frame_phys_addr);
}
dev_err(&instance->pdev->dev, "[%d]: Dumping Done\n\n",instance->host->host_no);
}
u32
megasas_build_and_issue_cmd(struct megasas_instance *instance,
struct scsi_cmnd *scmd)
{
struct megasas_cmd *cmd;
u32 frame_count;
cmd = megasas_get_cmd(instance);
if (!cmd)
return SCSI_MLQUEUE_HOST_BUSY;
/*
* Logical drive command
*/
if (megasas_cmd_type(scmd) == READ_WRITE_LDIO)
frame_count = megasas_build_ldio(instance, scmd, cmd);
else
frame_count = megasas_build_dcdb(instance, scmd, cmd);
if (!frame_count)
goto out_return_cmd;
cmd->scmd = scmd;
scmd->SCp.ptr = (char *)cmd;
/*
* Issue the command to the FW
*/
atomic_inc(&instance->fw_outstanding);
instance->instancet->fire_cmd(instance, cmd->frame_phys_addr,
cmd->frame_count-1, instance->reg_set);
return 0;
out_return_cmd:
megasas_return_cmd(instance, cmd);
return SCSI_MLQUEUE_HOST_BUSY;
}
/**
* megasas_queue_command - Queue entry point
* @scmd: SCSI command to be queued
* @done: Callback entry point
*/
static int
megasas_queue_command(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
{
struct megasas_instance *instance;
struct MR_PRIV_DEVICE *mr_device_priv_data;
instance = (struct megasas_instance *)
scmd->device->host->hostdata;
if (instance->unload == 1) {
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
return 0;
}
if (instance->issuepend_done == 0)
return SCSI_MLQUEUE_HOST_BUSY;
/* Check for an mpio path and adjust behavior */
if (atomic_read(&instance->adprecovery) == MEGASAS_ADPRESET_SM_INFAULT) {
if (megasas_check_mpio_paths(instance, scmd) ==
(DID_REQUEUE << 16)) {
return SCSI_MLQUEUE_HOST_BUSY;
} else {
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
return 0;
}
}
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
return 0;
}
mr_device_priv_data = scmd->device->hostdata;
if (!mr_device_priv_data) {
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
return 0;
}
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL)
return SCSI_MLQUEUE_HOST_BUSY;
if (mr_device_priv_data->tm_busy)
return SCSI_MLQUEUE_DEVICE_BUSY;
scmd->result = 0;
if (MEGASAS_IS_LOGICAL(scmd->device) &&
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
(scmd->device->id >= instance->fw_supported_vd_count ||
scmd->device->lun)) {
scmd->result = DID_BAD_TARGET << 16;
goto out_done;
}
if ((scmd->cmnd[0] == SYNCHRONIZE_CACHE) &&
MEGASAS_IS_LOGICAL(scmd->device) &&
(!instance->fw_sync_cache_support)) {
scmd->result = DID_OK << 16;
goto out_done;
}
return instance->instancet->build_and_issue_cmd(instance, scmd);
out_done:
scmd->scsi_done(scmd);
return 0;
}
static struct megasas_instance *megasas_lookup_instance(u16 host_no)
{
int i;
for (i = 0; i < megasas_mgmt_info.max_index; i++) {
if ((megasas_mgmt_info.instance[i]) &&
(megasas_mgmt_info.instance[i]->host->host_no == host_no))
return megasas_mgmt_info.instance[i];
}
return NULL;
}
/*
* megasas_set_dynamic_target_properties -
* Device property set by driver may not be static and it is required to be
* updated after OCR
*
* set tm_capable.
* set dma alignment (only for eedp protection enable vd).
*
* @sdev: OS provided scsi device
*
* Returns void
*/
void megasas_set_dynamic_target_properties(struct scsi_device *sdev)
{
u16 pd_index = 0, ld;
u32 device_id;
struct megasas_instance *instance;
struct fusion_context *fusion;
struct MR_PRIV_DEVICE *mr_device_priv_data;
struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync;
struct MR_LD_RAID *raid;
struct MR_DRV_RAID_MAP_ALL *local_map_ptr;
instance = megasas_lookup_instance(sdev->host->host_no);
fusion = instance->ctrl_context;
mr_device_priv_data = sdev->hostdata;
if (!fusion || !mr_device_priv_data)
return;
if (MEGASAS_IS_LOGICAL(sdev)) {
device_id = ((sdev->channel % 2) * MEGASAS_MAX_DEV_PER_CHANNEL)
+ sdev->id;
local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)];
ld = MR_TargetIdToLdGet(device_id, local_map_ptr);
if (ld >= instance->fw_supported_vd_count)
return;
raid = MR_LdRaidGet(ld, local_map_ptr);
if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER)
blk_queue_update_dma_alignment(sdev->request_queue, 0x7);
mr_device_priv_data->is_tm_capable =
raid->capability.tmCapable;
} else if (instance->use_seqnum_jbod_fp) {
pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
sdev->id;
pd_sync = (void *)fusion->pd_seq_sync
[(instance->pd_seq_map_id - 1) & 1];
mr_device_priv_data->is_tm_capable =
pd_sync->seq[pd_index].capability.tmCapable;
}
}
/*
* megasas_set_nvme_device_properties -
* set nomerges=2
* set virtual page boundary = 4K (current mr_nvme_pg_size is 4K).
* set maximum io transfer = MDTS of NVME device provided by MR firmware.
*
* MR firmware provides value in KB. Caller of this function converts
* kb into bytes.
*
* e.a MDTS=5 means 2^5 * nvme page size. (In case of 4K page size,
* MR firmware provides value 128 as (32 * 4K) = 128K.
*
* @sdev: scsi device
* @max_io_size: maximum io transfer size
*
*/
static inline void
megasas_set_nvme_device_properties(struct scsi_device *sdev, u32 max_io_size)
{
struct megasas_instance *instance;
u32 mr_nvme_pg_size;
instance = (struct megasas_instance *)sdev->host->hostdata;
mr_nvme_pg_size = max_t(u32, instance->nvme_page_size,
MR_DEFAULT_NVME_PAGE_SIZE);
blk_queue_max_hw_sectors(sdev->request_queue, (max_io_size / 512));
queue_flag_set_unlocked(QUEUE_FLAG_NOMERGES, sdev->request_queue);
blk_queue_virt_boundary(sdev->request_queue, mr_nvme_pg_size - 1);
}
/*
* megasas_set_static_target_properties -
* Device property set by driver are static and it is not required to be
* updated after OCR.
*
* set io timeout
* set device queue depth
* set nvme device properties. see - megasas_set_nvme_device_properties
*
* @sdev: scsi device
* @is_target_prop true, if fw provided target properties.
*/
static void megasas_set_static_target_properties(struct scsi_device *sdev,
bool is_target_prop)
{
u16 target_index = 0;
u8 interface_type;
u32 device_qd = MEGASAS_DEFAULT_CMD_PER_LUN;
u32 max_io_size_kb = MR_DEFAULT_NVME_MDTS_KB;
u32 tgt_device_qd;
struct megasas_instance *instance;
struct MR_PRIV_DEVICE *mr_device_priv_data;
instance = megasas_lookup_instance(sdev->host->host_no);
mr_device_priv_data = sdev->hostdata;
interface_type = mr_device_priv_data->interface_type;
/*
* The RAID firmware may require extended timeouts.
*/
blk_queue_rq_timeout(sdev->request_queue, scmd_timeout * HZ);
target_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + sdev->id;
switch (interface_type) {
case SAS_PD:
device_qd = MEGASAS_SAS_QD;
break;
case SATA_PD:
device_qd = MEGASAS_SATA_QD;
break;
case NVME_PD:
device_qd = MEGASAS_NVME_QD;
break;
}
if (is_target_prop) {
tgt_device_qd = le32_to_cpu(instance->tgt_prop->device_qdepth);
if (tgt_device_qd &&
(tgt_device_qd <= instance->host->can_queue))
device_qd = tgt_device_qd;
/* max_io_size_kb will be set to non zero for
* nvme based vd and syspd.
*/
max_io_size_kb = le32_to_cpu(instance->tgt_prop->max_io_size_kb);
}
if (instance->nvme_page_size && max_io_size_kb)
megasas_set_nvme_device_properties(sdev, (max_io_size_kb << 10));
scsi_change_queue_depth(sdev, device_qd);
}
static int megasas_slave_configure(struct scsi_device *sdev)
{
u16 pd_index = 0;
struct megasas_instance *instance;
int ret_target_prop = DCMD_FAILED;
bool is_target_prop = false;
instance = megasas_lookup_instance(sdev->host->host_no);
if (instance->pd_list_not_supported) {
if (!MEGASAS_IS_LOGICAL(sdev) && sdev->type == TYPE_DISK) {
pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
sdev->id;
if (instance->pd_list[pd_index].driveState !=
MR_PD_STATE_SYSTEM)
return -ENXIO;
}
}
mutex_lock(&instance->hba_mutex);
/* Send DCMD to Firmware and cache the information */
if ((instance->pd_info) && !MEGASAS_IS_LOGICAL(sdev))
megasas_get_pd_info(instance, sdev);
/* Some ventura firmware may not have instance->nvme_page_size set.
* Do not send MR_DCMD_DRV_GET_TARGET_PROP
*/
if ((instance->tgt_prop) && (instance->nvme_page_size))
ret_target_prop = megasas_get_target_prop(instance, sdev);
is_target_prop = (ret_target_prop == DCMD_SUCCESS) ? true : false;
megasas_set_static_target_properties(sdev, is_target_prop);
mutex_unlock(&instance->hba_mutex);
/* This sdev property may change post OCR */
megasas_set_dynamic_target_properties(sdev);
return 0;
}
static int megasas_slave_alloc(struct scsi_device *sdev)
{
u16 pd_index = 0;
struct megasas_instance *instance ;
struct MR_PRIV_DEVICE *mr_device_priv_data;
instance = megasas_lookup_instance(sdev->host->host_no);
if (!MEGASAS_IS_LOGICAL(sdev)) {
/*
* Open the OS scan to the SYSTEM PD
*/
pd_index =
(sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
sdev->id;
if ((instance->pd_list_not_supported ||
instance->pd_list[pd_index].driveState ==
MR_PD_STATE_SYSTEM)) {
goto scan_target;
}
return -ENXIO;
}
scan_target:
mr_device_priv_data = kzalloc(sizeof(*mr_device_priv_data),
GFP_KERNEL);
if (!mr_device_priv_data)
return -ENOMEM;
sdev->hostdata = mr_device_priv_data;
atomic_set(&mr_device_priv_data->r1_ldio_hint,
instance->r1_ldio_hint_default);
return 0;
}
static void megasas_slave_destroy(struct scsi_device *sdev)
{
kfree(sdev->hostdata);
sdev->hostdata = NULL;
}
/*
* megasas_complete_outstanding_ioctls - Complete outstanding ioctls after a
* kill adapter
* @instance: Adapter soft state
*
*/
static void megasas_complete_outstanding_ioctls(struct megasas_instance *instance)
{
int i;
struct megasas_cmd *cmd_mfi;
struct megasas_cmd_fusion *cmd_fusion;
struct fusion_context *fusion = instance->ctrl_context;
/* Find all outstanding ioctls */
if (fusion) {
for (i = 0; i < instance->max_fw_cmds; i++) {
cmd_fusion = fusion->cmd_list[i];
if (cmd_fusion->sync_cmd_idx != (u32)ULONG_MAX) {
cmd_mfi = instance->cmd_list[cmd_fusion->sync_cmd_idx];
if (cmd_mfi->sync_cmd &&
cmd_mfi->frame->hdr.cmd != MFI_CMD_ABORT)
megasas_complete_cmd(instance,
cmd_mfi, DID_OK);
}
}
} else {
for (i = 0; i < instance->max_fw_cmds; i++) {
cmd_mfi = instance->cmd_list[i];
if (cmd_mfi->sync_cmd && cmd_mfi->frame->hdr.cmd !=
MFI_CMD_ABORT)
megasas_complete_cmd(instance, cmd_mfi, DID_OK);
}
}
}
void megaraid_sas_kill_hba(struct megasas_instance *instance)
{
/* Set critical error to block I/O & ioctls in case caller didn't */
atomic_set(&instance->adprecovery, MEGASAS_HW_CRITICAL_ERROR);
/* Wait 1 second to ensure IO or ioctls in build have posted */
msleep(1000);
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
(instance->ctrl_context)) {
writel(MFI_STOP_ADP, &instance->reg_set->doorbell);
/* Flush */
readl(&instance->reg_set->doorbell);
if (instance->requestorId && instance->peerIsPresent)
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
} else {
writel(MFI_STOP_ADP,
&instance->reg_set->inbound_doorbell);
}
/* Complete outstanding ioctls when adapter is killed */
megasas_complete_outstanding_ioctls(instance);
}
/**
* megasas_check_and_restore_queue_depth - Check if queue depth needs to be
* restored to max value
* @instance: Adapter soft state
*
*/
void
megasas_check_and_restore_queue_depth(struct megasas_instance *instance)
{
unsigned long flags;
if (instance->flag & MEGASAS_FW_BUSY
&& time_after(jiffies, instance->last_time + 5 * HZ)
&& atomic_read(&instance->fw_outstanding) <
instance->throttlequeuedepth + 1) {
spin_lock_irqsave(instance->host->host_lock, flags);
instance->flag &= ~MEGASAS_FW_BUSY;
instance->host->can_queue = instance->cur_can_queue;
spin_unlock_irqrestore(instance->host->host_lock, flags);
}
}
/**
* megasas_complete_cmd_dpc - Returns FW's controller structure
* @instance_addr: Address of adapter soft state
*
* Tasklet to complete cmds
*/
static void megasas_complete_cmd_dpc(unsigned long instance_addr)
{
u32 producer;
u32 consumer;
u32 context;
struct megasas_cmd *cmd;
struct megasas_instance *instance =
(struct megasas_instance *)instance_addr;
unsigned long flags;
/* If we have already declared adapter dead, donot complete cmds */
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR)
return;
spin_lock_irqsave(&instance->completion_lock, flags);
producer = le32_to_cpu(*instance->producer);
consumer = le32_to_cpu(*instance->consumer);
while (consumer != producer) {
context = le32_to_cpu(instance->reply_queue[consumer]);
if (context >= instance->max_fw_cmds) {
dev_err(&instance->pdev->dev, "Unexpected context value %x\n",
context);
BUG();
}
cmd = instance->cmd_list[context];
megasas_complete_cmd(instance, cmd, DID_OK);
consumer++;
if (consumer == (instance->max_fw_cmds + 1)) {
consumer = 0;
}
}
*instance->consumer = cpu_to_le32(producer);
spin_unlock_irqrestore(&instance->completion_lock, flags);
/*
* Check if we can restore can_queue
*/
megasas_check_and_restore_queue_depth(instance);
}
/**
* megasas_start_timer - Initializes a timer object
* @instance: Adapter soft state
* @timer: timer object to be initialized
* @fn: timer function
* @interval: time interval between timer function call
*
*/
void megasas_start_timer(struct megasas_instance *instance,
struct timer_list *timer,
void *fn, unsigned long interval)
{
init_timer(timer);
timer->expires = jiffies + interval;
timer->data = (unsigned long)instance;
timer->function = fn;
add_timer(timer);
}
static void
megasas_internal_reset_defer_cmds(struct megasas_instance *instance);
static void
process_fw_state_change_wq(struct work_struct *work);
void megasas_do_ocr(struct megasas_instance *instance)
{
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1064R) ||
(instance->pdev->device == PCI_DEVICE_ID_DELL_PERC5) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_VERDE_ZCR)) {
*instance->consumer = cpu_to_le32(MEGASAS_ADPRESET_INPROG_SIGN);
}
instance->instancet->disable_intr(instance);
atomic_set(&instance->adprecovery, MEGASAS_ADPRESET_SM_INFAULT);
instance->issuepend_done = 0;
atomic_set(&instance->fw_outstanding, 0);
megasas_internal_reset_defer_cmds(instance);
process_fw_state_change_wq(&instance->work_init);
}
static int megasas_get_ld_vf_affiliation_111(struct megasas_instance *instance,
int initial)
{
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
struct MR_LD_VF_AFFILIATION_111 *new_affiliation_111 = NULL;
dma_addr_t new_affiliation_111_h;
int ld, retval = 0;
u8 thisVf;
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "megasas_get_ld_vf_affiliation_111:"
"Failed to get cmd for scsi%d\n",
instance->host->host_no);
return -ENOMEM;
}
dcmd = &cmd->frame->dcmd;
if (!instance->vf_affiliation_111) {
dev_warn(&instance->pdev->dev, "SR-IOV: Couldn't get LD/VF "
"affiliation for scsi%d\n", instance->host->host_no);
megasas_return_cmd(instance, cmd);
return -ENOMEM;
}
if (initial)
memset(instance->vf_affiliation_111, 0,
sizeof(struct MR_LD_VF_AFFILIATION_111));
else {
new_affiliation_111 =
pci_alloc_consistent(instance->pdev,
sizeof(struct MR_LD_VF_AFFILIATION_111),
&new_affiliation_111_h);
if (!new_affiliation_111) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "SR-IOV: Couldn't allocate "
"memory for new affiliation for scsi%d\n",
instance->host->host_no);
megasas_return_cmd(instance, cmd);
return -ENOMEM;
}
memset(new_affiliation_111, 0,
sizeof(struct MR_LD_VF_AFFILIATION_111));
}
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->cmd = MFI_CMD_DCMD;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_BOTH);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len =
cpu_to_le32(sizeof(struct MR_LD_VF_AFFILIATION_111));
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_VF_MAP_GET_ALL_LDS_111);
if (initial)
dcmd->sgl.sge32[0].phys_addr =
cpu_to_le32(instance->vf_affiliation_111_h);
else
dcmd->sgl.sge32[0].phys_addr =
cpu_to_le32(new_affiliation_111_h);
dcmd->sgl.sge32[0].length = cpu_to_le32(
sizeof(struct MR_LD_VF_AFFILIATION_111));
dev_warn(&instance->pdev->dev, "SR-IOV: Getting LD/VF affiliation for "
"scsi%d\n", instance->host->host_no);
if (megasas_issue_blocked_cmd(instance, cmd, 0) != DCMD_SUCCESS) {
dev_warn(&instance->pdev->dev, "SR-IOV: LD/VF affiliation DCMD"
" failed with status 0x%x for scsi%d\n",
dcmd->cmd_status, instance->host->host_no);
retval = 1; /* Do a scan if we couldn't get affiliation */
goto out;
}
if (!initial) {
thisVf = new_affiliation_111->thisVf;
for (ld = 0 ; ld < new_affiliation_111->vdCount; ld++)
if (instance->vf_affiliation_111->map[ld].policy[thisVf] !=
new_affiliation_111->map[ld].policy[thisVf]) {
dev_warn(&instance->pdev->dev, "SR-IOV: "
"Got new LD/VF affiliation for scsi%d\n",
instance->host->host_no);
memcpy(instance->vf_affiliation_111,
new_affiliation_111,
sizeof(struct MR_LD_VF_AFFILIATION_111));
retval = 1;
goto out;
}
}
out:
if (new_affiliation_111) {
pci_free_consistent(instance->pdev,
sizeof(struct MR_LD_VF_AFFILIATION_111),
new_affiliation_111,
new_affiliation_111_h);
}
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(instance, cmd);
return retval;
}
static int megasas_get_ld_vf_affiliation_12(struct megasas_instance *instance,
int initial)
{
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
struct MR_LD_VF_AFFILIATION *new_affiliation = NULL;
struct MR_LD_VF_MAP *newmap = NULL, *savedmap = NULL;
dma_addr_t new_affiliation_h;
int i, j, retval = 0, found = 0, doscan = 0;
u8 thisVf;
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "megasas_get_ld_vf_affiliation12: "
"Failed to get cmd for scsi%d\n",
instance->host->host_no);
return -ENOMEM;
}
dcmd = &cmd->frame->dcmd;
if (!instance->vf_affiliation) {
dev_warn(&instance->pdev->dev, "SR-IOV: Couldn't get LD/VF "
"affiliation for scsi%d\n", instance->host->host_no);
megasas_return_cmd(instance, cmd);
return -ENOMEM;
}
if (initial)
memset(instance->vf_affiliation, 0, (MAX_LOGICAL_DRIVES + 1) *
sizeof(struct MR_LD_VF_AFFILIATION));
else {
new_affiliation =
pci_alloc_consistent(instance->pdev,
(MAX_LOGICAL_DRIVES + 1) *
sizeof(struct MR_LD_VF_AFFILIATION),
&new_affiliation_h);
if (!new_affiliation) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "SR-IOV: Couldn't allocate "
"memory for new affiliation for scsi%d\n",
instance->host->host_no);
megasas_return_cmd(instance, cmd);
return -ENOMEM;
}
memset(new_affiliation, 0, (MAX_LOGICAL_DRIVES + 1) *
sizeof(struct MR_LD_VF_AFFILIATION));
}
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->cmd = MFI_CMD_DCMD;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_BOTH);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32((MAX_LOGICAL_DRIVES + 1) *
sizeof(struct MR_LD_VF_AFFILIATION));
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_VF_MAP_GET_ALL_LDS);
if (initial)
dcmd->sgl.sge32[0].phys_addr =
cpu_to_le32(instance->vf_affiliation_h);
else
dcmd->sgl.sge32[0].phys_addr =
cpu_to_le32(new_affiliation_h);
dcmd->sgl.sge32[0].length = cpu_to_le32((MAX_LOGICAL_DRIVES + 1) *
sizeof(struct MR_LD_VF_AFFILIATION));
dev_warn(&instance->pdev->dev, "SR-IOV: Getting LD/VF affiliation for "
"scsi%d\n", instance->host->host_no);
if (megasas_issue_blocked_cmd(instance, cmd, 0) != DCMD_SUCCESS) {
dev_warn(&instance->pdev->dev, "SR-IOV: LD/VF affiliation DCMD"
" failed with status 0x%x for scsi%d\n",
dcmd->cmd_status, instance->host->host_no);
retval = 1; /* Do a scan if we couldn't get affiliation */
goto out;
}
if (!initial) {
if (!new_affiliation->ldCount) {
dev_warn(&instance->pdev->dev, "SR-IOV: Got new LD/VF "
"affiliation for passive path for scsi%d\n",
instance->host->host_no);
retval = 1;
goto out;
}
newmap = new_affiliation->map;
savedmap = instance->vf_affiliation->map;
thisVf = new_affiliation->thisVf;
for (i = 0 ; i < new_affiliation->ldCount; i++) {
found = 0;
for (j = 0; j < instance->vf_affiliation->ldCount;
j++) {
if (newmap->ref.targetId ==
savedmap->ref.targetId) {
found = 1;
if (newmap->policy[thisVf] !=
savedmap->policy[thisVf]) {
doscan = 1;
goto out;
}
}
savedmap = (struct MR_LD_VF_MAP *)
((unsigned char *)savedmap +
savedmap->size);
}
if (!found && newmap->policy[thisVf] !=
MR_LD_ACCESS_HIDDEN) {
doscan = 1;
goto out;
}
newmap = (struct MR_LD_VF_MAP *)
((unsigned char *)newmap + newmap->size);
}
newmap = new_affiliation->map;
savedmap = instance->vf_affiliation->map;
for (i = 0 ; i < instance->vf_affiliation->ldCount; i++) {
found = 0;
for (j = 0 ; j < new_affiliation->ldCount; j++) {
if (savedmap->ref.targetId ==
newmap->ref.targetId) {
found = 1;
if (savedmap->policy[thisVf] !=
newmap->policy[thisVf]) {
doscan = 1;
goto out;
}
}
newmap = (struct MR_LD_VF_MAP *)
((unsigned char *)newmap +
newmap->size);
}
if (!found && savedmap->policy[thisVf] !=
MR_LD_ACCESS_HIDDEN) {
doscan = 1;
goto out;
}
savedmap = (struct MR_LD_VF_MAP *)
((unsigned char *)savedmap +
savedmap->size);
}
}
out:
if (doscan) {
dev_warn(&instance->pdev->dev, "SR-IOV: Got new LD/VF "
"affiliation for scsi%d\n", instance->host->host_no);
memcpy(instance->vf_affiliation, new_affiliation,
new_affiliation->size);
retval = 1;
}
if (new_affiliation)
pci_free_consistent(instance->pdev,
(MAX_LOGICAL_DRIVES + 1) *
sizeof(struct MR_LD_VF_AFFILIATION),
new_affiliation, new_affiliation_h);
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(instance, cmd);
return retval;
}
/* This function will get the current SR-IOV LD/VF affiliation */
static int megasas_get_ld_vf_affiliation(struct megasas_instance *instance,
int initial)
{
int retval;
if (instance->PlasmaFW111)
retval = megasas_get_ld_vf_affiliation_111(instance, initial);
else
retval = megasas_get_ld_vf_affiliation_12(instance, initial);
return retval;
}
/* This function will tell FW to start the SR-IOV heartbeat */
int megasas_sriov_start_heartbeat(struct megasas_instance *instance,
int initial)
{
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
int retval = 0;
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "megasas_sriov_start_heartbeat: "
"Failed to get cmd for scsi%d\n",
instance->host->host_no);
return -ENOMEM;
}
dcmd = &cmd->frame->dcmd;
if (initial) {
instance->hb_host_mem =
pci_zalloc_consistent(instance->pdev,
sizeof(struct MR_CTRL_HB_HOST_MEM),
&instance->hb_host_mem_h);
if (!instance->hb_host_mem) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "SR-IOV: Couldn't allocate"
" memory for heartbeat host memory for scsi%d\n",
instance->host->host_no);
retval = -ENOMEM;
goto out;
}
}
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->mbox.s[0] = cpu_to_le16(sizeof(struct MR_CTRL_HB_HOST_MEM));
dcmd->cmd = MFI_CMD_DCMD;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_BOTH);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_CTRL_HB_HOST_MEM));
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_SHARED_HOST_MEM_ALLOC);
dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(instance->hb_host_mem_h);
dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct MR_CTRL_HB_HOST_MEM));
dev_warn(&instance->pdev->dev, "SR-IOV: Starting heartbeat for scsi%d\n",
instance->host->host_no);
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
if (instance->ctrl_context && !instance->mask_interrupts)
retval = megasas_issue_blocked_cmd(instance, cmd,
MEGASAS_ROUTINE_WAIT_TIME_VF);
else
retval = megasas_issue_polled(instance, cmd);
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
if (retval) {
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
dev_warn(&instance->pdev->dev, "SR-IOV: MR_DCMD_CTRL_SHARED_HOST"
"_MEM_ALLOC DCMD %s for scsi%d\n",
(dcmd->cmd_status == MFI_STAT_INVALID_STATUS) ?
"timed out" : "failed", instance->host->host_no);
retval = 1;
}
out:
megasas_return_cmd(instance, cmd);
return retval;
}
/* Handler for SR-IOV heartbeat */
void megasas_sriov_heartbeat_handler(unsigned long instance_addr)
{
struct megasas_instance *instance =
(struct megasas_instance *)instance_addr;
if (instance->hb_host_mem->HB.fwCounter !=
instance->hb_host_mem->HB.driverCounter) {
instance->hb_host_mem->HB.driverCounter =
instance->hb_host_mem->HB.fwCounter;
mod_timer(&instance->sriov_heartbeat_timer,
jiffies + MEGASAS_SRIOV_HEARTBEAT_INTERVAL_VF);
} else {
dev_warn(&instance->pdev->dev, "SR-IOV: Heartbeat never "
"completed for scsi%d\n", instance->host->host_no);
schedule_work(&instance->work_init);
}
}
/**
* megasas_wait_for_outstanding - Wait for all outstanding cmds
* @instance: Adapter soft state
*
* This function waits for up to MEGASAS_RESET_WAIT_TIME seconds for FW to
* complete all its outstanding commands. Returns error if one or more IOs
* are pending after this time period. It also marks the controller dead.
*/
static int megasas_wait_for_outstanding(struct megasas_instance *instance)
{
int i, sl, outstanding;
u32 reset_index;
u32 wait_time = MEGASAS_RESET_WAIT_TIME;
unsigned long flags;
struct list_head clist_local;
struct megasas_cmd *reset_cmd;
u32 fw_state;
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
dev_info(&instance->pdev->dev, "%s:%d HBA is killed.\n",
__func__, __LINE__);
return FAILED;
}
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
INIT_LIST_HEAD(&clist_local);
spin_lock_irqsave(&instance->hba_lock, flags);
list_splice_init(&instance->internal_reset_pending_q,
&clist_local);
spin_unlock_irqrestore(&instance->hba_lock, flags);
dev_notice(&instance->pdev->dev, "HBA reset wait ...\n");
for (i = 0; i < wait_time; i++) {
msleep(1000);
if (atomic_read(&instance->adprecovery) == MEGASAS_HBA_OPERATIONAL)
break;
}
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
dev_notice(&instance->pdev->dev, "reset: Stopping HBA.\n");
atomic_set(&instance->adprecovery, MEGASAS_HW_CRITICAL_ERROR);
return FAILED;
}
reset_index = 0;
while (!list_empty(&clist_local)) {
reset_cmd = list_entry((&clist_local)->next,
struct megasas_cmd, list);
list_del_init(&reset_cmd->list);
if (reset_cmd->scmd) {
reset_cmd->scmd->result = DID_REQUEUE << 16;
dev_notice(&instance->pdev->dev, "%d:%p reset [%02x]\n",
reset_index, reset_cmd,
reset_cmd->scmd->cmnd[0]);
reset_cmd->scmd->scsi_done(reset_cmd->scmd);
megasas_return_cmd(instance, reset_cmd);
} else if (reset_cmd->sync_cmd) {
dev_notice(&instance->pdev->dev, "%p synch cmds"
"reset queue\n",
reset_cmd);
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
reset_cmd->cmd_status_drv = MFI_STAT_INVALID_STATUS;
instance->instancet->fire_cmd(instance,
reset_cmd->frame_phys_addr,
0, instance->reg_set);
} else {
dev_notice(&instance->pdev->dev, "%p unexpected"
"cmds lst\n",
reset_cmd);
}
reset_index++;
}
return SUCCESS;
}
for (i = 0; i < resetwaittime; i++) {
outstanding = atomic_read(&instance->fw_outstanding);
if (!outstanding)
break;
if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
dev_notice(&instance->pdev->dev, "[%2d]waiting for %d "
"commands to complete\n",i,outstanding);
/*
* Call cmd completion routine. Cmd to be
* be completed directly without depending on isr.
*/
megasas_complete_cmd_dpc((unsigned long)instance);
}
msleep(1000);
}
i = 0;
outstanding = atomic_read(&instance->fw_outstanding);
fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
if ((!outstanding && (fw_state == MFI_STATE_OPERATIONAL)))
goto no_outstanding;
if (instance->disableOnlineCtrlReset)
goto kill_hba_and_failed;
do {
if ((fw_state == MFI_STATE_FAULT) || atomic_read(&instance->fw_outstanding)) {
dev_info(&instance->pdev->dev,
"%s:%d waiting_for_outstanding: before issue OCR. FW state = 0x%x, oustanding 0x%x\n",
__func__, __LINE__, fw_state, atomic_read(&instance->fw_outstanding));
if (i == 3)
goto kill_hba_and_failed;
megasas_do_ocr(instance);
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
dev_info(&instance->pdev->dev, "%s:%d OCR failed and HBA is killed.\n",
__func__, __LINE__);
return FAILED;
}
dev_info(&instance->pdev->dev, "%s:%d waiting_for_outstanding: after issue OCR.\n",
__func__, __LINE__);
for (sl = 0; sl < 10; sl++)
msleep(500);
outstanding = atomic_read(&instance->fw_outstanding);
fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
if ((!outstanding && (fw_state == MFI_STATE_OPERATIONAL)))
goto no_outstanding;
}
i++;
} while (i <= 3);
no_outstanding:
dev_info(&instance->pdev->dev, "%s:%d no more pending commands remain after reset handling.\n",
__func__, __LINE__);
return SUCCESS;
kill_hba_and_failed:
/* Reset not supported, kill adapter */
dev_info(&instance->pdev->dev, "%s:%d killing adapter scsi%d"
" disableOnlineCtrlReset %d fw_outstanding %d \n",
__func__, __LINE__, instance->host->host_no, instance->disableOnlineCtrlReset,
atomic_read(&instance->fw_outstanding));
megasas_dump_pending_frames(instance);
megaraid_sas_kill_hba(instance);
return FAILED;
}
/**
* megasas_generic_reset - Generic reset routine
* @scmd: Mid-layer SCSI command
*
* This routine implements a generic reset handler for device, bus and host
* reset requests. Device, bus and host specific reset handlers can use this
* function after they do their specific tasks.
*/
static int megasas_generic_reset(struct scsi_cmnd *scmd)
{
int ret_val;
struct megasas_instance *instance;
instance = (struct megasas_instance *)scmd->device->host->hostdata;
scmd_printk(KERN_NOTICE, scmd, "megasas: RESET cmd=%x retries=%x\n",
scmd->cmnd[0], scmd->retries);
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
dev_err(&instance->pdev->dev, "cannot recover from previous reset failures\n");
return FAILED;
}
ret_val = megasas_wait_for_outstanding(instance);
if (ret_val == SUCCESS)
dev_notice(&instance->pdev->dev, "reset successful\n");
else
dev_err(&instance->pdev->dev, "failed to do reset\n");
return ret_val;
}
/**
* megasas_reset_timer - quiesce the adapter if required
* @scmd: scsi cmnd
*
* Sets the FW busy flag and reduces the host->can_queue if the
* cmd has not been completed within the timeout period.
*/
static enum
blk_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
{
struct megasas_instance *instance;
unsigned long flags;
if (time_after(jiffies, scmd->jiffies_at_alloc +
(scmd_timeout * 2) * HZ)) {
return BLK_EH_NOT_HANDLED;
}
instance = (struct megasas_instance *)scmd->device->host->hostdata;
if (!(instance->flag & MEGASAS_FW_BUSY)) {
/* FW is busy, throttle IO */
spin_lock_irqsave(instance->host->host_lock, flags);
instance->host->can_queue = instance->throttlequeuedepth;
instance->last_time = jiffies;
instance->flag |= MEGASAS_FW_BUSY;
spin_unlock_irqrestore(instance->host->host_lock, flags);
}
return BLK_EH_RESET_TIMER;
}
/**
* megasas_dump_frame - This function will dump MPT/MFI frame
*/
static inline void
megasas_dump_frame(void *mpi_request, int sz)
{
int i;
__le32 *mfp = (__le32 *)mpi_request;
printk(KERN_INFO "IO request frame:\n\t");
for (i = 0; i < sz / sizeof(__le32); i++) {
if (i && ((i % 8) == 0))
printk("\n\t");
printk("%08x ", le32_to_cpu(mfp[i]));
}
printk("\n");
}
/**
* megasas_reset_bus_host - Bus & host reset handler entry point
*/
static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
{
int ret;
struct megasas_instance *instance;
instance = (struct megasas_instance *)scmd->device->host->hostdata;
scmd_printk(KERN_INFO, scmd,
"Controller reset is requested due to IO timeout\n"
"SCSI command pointer: (%p)\t SCSI host state: %d\t"
" SCSI host busy: %d\t FW outstanding: %d\n",
scmd, scmd->device->host->shost_state,
atomic_read((atomic_t *)&scmd->device->host->host_busy),
atomic_read(&instance->fw_outstanding));
/*
* First wait for all commands to complete
*/
if (instance->ctrl_context) {
struct megasas_cmd_fusion *cmd;
cmd = (struct megasas_cmd_fusion *)scmd->SCp.ptr;
if (cmd)
megasas_dump_frame(cmd->io_request,
sizeof(struct MPI2_RAID_SCSI_IO_REQUEST));
ret = megasas_reset_fusion(scmd->device->host,
SCSIIO_TIMEOUT_OCR);
} else
ret = megasas_generic_reset(scmd);
return ret;
}
/**
* megasas_task_abort - Issues task abort request to firmware
* (supported only for fusion adapters)
* @scmd: SCSI command pointer
*/
static int megasas_task_abort(struct scsi_cmnd *scmd)
{
int ret;
struct megasas_instance *instance;
instance = (struct megasas_instance *)scmd->device->host->hostdata;
if (instance->ctrl_context)
ret = megasas_task_abort_fusion(scmd);
else {
sdev_printk(KERN_NOTICE, scmd->device, "TASK ABORT not supported\n");
ret = FAILED;
}
return ret;
}
/**
* megasas_reset_target: Issues target reset request to firmware
* (supported only for fusion adapters)
* @scmd: SCSI command pointer
*/
static int megasas_reset_target(struct scsi_cmnd *scmd)
{
int ret;
struct megasas_instance *instance;
instance = (struct megasas_instance *)scmd->device->host->hostdata;
if (instance->ctrl_context)
ret = megasas_reset_target_fusion(scmd);
else {
sdev_printk(KERN_NOTICE, scmd->device, "TARGET RESET not supported\n");
ret = FAILED;
}
return ret;
}
/**
* megasas_bios_param - Returns disk geometry for a disk
* @sdev: device handle
* @bdev: block device
* @capacity: drive capacity
* @geom: geometry parameters
*/
static int
megasas_bios_param(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[])
{
int heads;
int sectors;
sector_t cylinders;
unsigned long tmp;
/* Default heads (64) & sectors (32) */
heads = 64;
sectors = 32;
tmp = heads * sectors;
cylinders = capacity;
sector_div(cylinders, tmp);
/*
* Handle extended translation size for logical drives > 1Gb
*/
if (capacity >= 0x200000) {
heads = 255;
sectors = 63;
tmp = heads*sectors;
cylinders = capacity;
sector_div(cylinders, tmp);
}
geom[0] = heads;
geom[1] = sectors;
geom[2] = cylinders;
return 0;
}
static void megasas_aen_polling(struct work_struct *work);
/**
* megasas_service_aen - Processes an event notification
* @instance: Adapter soft state
* @cmd: AEN command completed by the ISR
*
* For AEN, driver sends a command down to FW that is held by the FW till an
* event occurs. When an event of interest occurs, FW completes the command
* that it was previously holding.
*
* This routines sends SIGIO signal to processes that have registered with the
* driver for AEN.
*/
static void
megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd)
{
unsigned long flags;
/*
* Don't signal app if it is just an aborted previously registered aen
*/
if ((!cmd->abort_aen) && (instance->unload == 0)) {
spin_lock_irqsave(&poll_aen_lock, flags);
megasas_poll_wait_aen = 1;
spin_unlock_irqrestore(&poll_aen_lock, flags);
wake_up(&megasas_poll_wait);
kill_fasync(&megasas_async_queue, SIGIO, POLL_IN);
}
else
cmd->abort_aen = 0;
instance->aen_cmd = NULL;
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(instance, cmd);
if ((instance->unload == 0) &&
((instance->issuepend_done == 1))) {
struct megasas_aen_event *ev;
ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev) {
dev_err(&instance->pdev->dev, "megasas_service_aen: out of memory\n");
} else {
ev->instance = instance;
instance->ev = ev;
INIT_DELAYED_WORK(&ev->hotplug_work,
megasas_aen_polling);
schedule_delayed_work(&ev->hotplug_work, 0);
}
}
}
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
static ssize_t
megasas_fw_crash_buffer_store(struct device *cdev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct megasas_instance *instance =
(struct megasas_instance *) shost->hostdata;
int val = 0;
unsigned long flags;
if (kstrtoint(buf, 0, &val) != 0)
return -EINVAL;
spin_lock_irqsave(&instance->crashdump_lock, flags);
instance->fw_crash_buffer_offset = val;
spin_unlock_irqrestore(&instance->crashdump_lock, flags);
return strlen(buf);
}
static ssize_t
megasas_fw_crash_buffer_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct megasas_instance *instance =
(struct megasas_instance *) shost->hostdata;
u32 size;
unsigned long buff_addr;
unsigned long dmachunk = CRASH_DMA_BUF_SIZE;
unsigned long src_addr;
unsigned long flags;
u32 buff_offset;
spin_lock_irqsave(&instance->crashdump_lock, flags);
buff_offset = instance->fw_crash_buffer_offset;
if (!instance->crash_dump_buf &&
!((instance->fw_crash_state == AVAILABLE) ||
(instance->fw_crash_state == COPYING))) {
dev_err(&instance->pdev->dev,
"Firmware crash dump is not available\n");
spin_unlock_irqrestore(&instance->crashdump_lock, flags);
return -EINVAL;
}
buff_addr = (unsigned long) buf;
if (buff_offset > (instance->fw_crash_buffer_size * dmachunk)) {
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
dev_err(&instance->pdev->dev,
"Firmware crash dump offset is out of range\n");
spin_unlock_irqrestore(&instance->crashdump_lock, flags);
return 0;
}
size = (instance->fw_crash_buffer_size * dmachunk) - buff_offset;
size = (size >= PAGE_SIZE) ? (PAGE_SIZE - 1) : size;
src_addr = (unsigned long)instance->crash_buf[buff_offset / dmachunk] +
(buff_offset % dmachunk);
memcpy(buf, (void *)src_addr, size);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
spin_unlock_irqrestore(&instance->crashdump_lock, flags);
return size;
}
static ssize_t
megasas_fw_crash_buffer_size_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct megasas_instance *instance =
(struct megasas_instance *) shost->hostdata;
return snprintf(buf, PAGE_SIZE, "%ld\n", (unsigned long)
((instance->fw_crash_buffer_size) * 1024 * 1024)/PAGE_SIZE);
}
static ssize_t
megasas_fw_crash_state_store(struct device *cdev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct megasas_instance *instance =
(struct megasas_instance *) shost->hostdata;
int val = 0;
unsigned long flags;
if (kstrtoint(buf, 0, &val) != 0)
return -EINVAL;
if ((val <= AVAILABLE || val > COPY_ERROR)) {
dev_err(&instance->pdev->dev, "application updates invalid "
"firmware crash state\n");
return -EINVAL;
}
instance->fw_crash_state = val;
if ((val == COPIED) || (val == COPY_ERROR)) {
spin_lock_irqsave(&instance->crashdump_lock, flags);
megasas_free_host_crash_buffer(instance);
spin_unlock_irqrestore(&instance->crashdump_lock, flags);
if (val == COPY_ERROR)
dev_info(&instance->pdev->dev, "application failed to "
"copy Firmware crash dump\n");
else
dev_info(&instance->pdev->dev, "Firmware crash dump "
"copied successfully\n");
}
return strlen(buf);
}
static ssize_t
megasas_fw_crash_state_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct megasas_instance *instance =
(struct megasas_instance *) shost->hostdata;
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
return snprintf(buf, PAGE_SIZE, "%d\n", instance->fw_crash_state);
}
static ssize_t
megasas_page_size_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%ld\n", (unsigned long)PAGE_SIZE - 1);
}
static ssize_t
megasas_ldio_outstanding_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct megasas_instance *instance = (struct megasas_instance *)shost->hostdata;
return snprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&instance->ldio_outstanding));
}
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
static DEVICE_ATTR(fw_crash_buffer, S_IRUGO | S_IWUSR,
megasas_fw_crash_buffer_show, megasas_fw_crash_buffer_store);
static DEVICE_ATTR(fw_crash_buffer_size, S_IRUGO,
megasas_fw_crash_buffer_size_show, NULL);
static DEVICE_ATTR(fw_crash_state, S_IRUGO | S_IWUSR,
megasas_fw_crash_state_show, megasas_fw_crash_state_store);
static DEVICE_ATTR(page_size, S_IRUGO,
megasas_page_size_show, NULL);
static DEVICE_ATTR(ldio_outstanding, S_IRUGO,
megasas_ldio_outstanding_show, NULL);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
struct device_attribute *megaraid_host_attrs[] = {
&dev_attr_fw_crash_buffer_size,
&dev_attr_fw_crash_buffer,
&dev_attr_fw_crash_state,
&dev_attr_page_size,
&dev_attr_ldio_outstanding,
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
NULL,
};
/*
* Scsi host template for megaraid_sas driver
*/
static struct scsi_host_template megasas_template = {
.module = THIS_MODULE,
.name = "Avago SAS based MegaRAID driver",
.proc_name = "megaraid_sas",
.slave_configure = megasas_slave_configure,
.slave_alloc = megasas_slave_alloc,
.slave_destroy = megasas_slave_destroy,
.queuecommand = megasas_queue_command,
.eh_target_reset_handler = megasas_reset_target,
.eh_abort_handler = megasas_task_abort,
.eh_host_reset_handler = megasas_reset_bus_host,
.eh_timed_out = megasas_reset_timer,
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
.shost_attrs = megaraid_host_attrs,
.bios_param = megasas_bios_param,
.use_clustering = ENABLE_CLUSTERING,
.change_queue_depth = scsi_change_queue_depth,
.no_write_same = 1,
};
/**
* megasas_complete_int_cmd - Completes an internal command
* @instance: Adapter soft state
* @cmd: Command to be completed
*
* The megasas_issue_blocked_cmd() function waits for a command to complete
* after it issues a command. This function wakes up that waiting routine by
* calling wake_up() on the wait queue.
*/
static void
megasas_complete_int_cmd(struct megasas_instance *instance,
struct megasas_cmd *cmd)
{
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
cmd->cmd_status_drv = cmd->frame->io.cmd_status;
wake_up(&instance->int_cmd_wait_q);
}
/**
* megasas_complete_abort - Completes aborting a command
* @instance: Adapter soft state
* @cmd: Cmd that was issued to abort another cmd
*
* The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q
* after it issues an abort on a previously issued command. This function
* wakes up all functions waiting on the same wait queue.
*/
static void
megasas_complete_abort(struct megasas_instance *instance,
struct megasas_cmd *cmd)
{
if (cmd->sync_cmd) {
cmd->sync_cmd = 0;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
cmd->cmd_status_drv = 0;
wake_up(&instance->abort_cmd_wait_q);
}
}
/**
* megasas_complete_cmd - Completes a command
* @instance: Adapter soft state
* @cmd: Command to be completed
* @alt_status: If non-zero, use this value as status to
* SCSI mid-layer instead of the value returned
* by the FW. This should be used if caller wants
* an alternate status (as in the case of aborted
* commands)
*/
void
megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
u8 alt_status)
{
int exception = 0;
struct megasas_header *hdr = &cmd->frame->hdr;
unsigned long flags;
struct fusion_context *fusion = instance->ctrl_context;
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
u32 opcode, status;
/* flag for the retry reset */
cmd->retry_for_fw_reset = 0;
if (cmd->scmd)
cmd->scmd->SCp.ptr = NULL;
switch (hdr->cmd) {
case MFI_CMD_INVALID:
/* Some older 1068 controller FW may keep a pended
MR_DCMD_CTRL_EVENT_GET_INFO left over from the main kernel
when booting the kdump kernel. Ignore this command to
prevent a kernel panic on shutdown of the kdump kernel. */
dev_warn(&instance->pdev->dev, "MFI_CMD_INVALID command "
"completed\n");
dev_warn(&instance->pdev->dev, "If you have a controller "
"other than PERC5, please upgrade your firmware\n");
break;
case MFI_CMD_PD_SCSI_IO:
case MFI_CMD_LD_SCSI_IO:
/*
* MFI_CMD_PD_SCSI_IO and MFI_CMD_LD_SCSI_IO could have been
* issued either through an IO path or an IOCTL path. If it
* was via IOCTL, we will send it to internal completion.
*/
if (cmd->sync_cmd) {
cmd->sync_cmd = 0;
megasas_complete_int_cmd(instance, cmd);
break;
}
case MFI_CMD_LD_READ:
case MFI_CMD_LD_WRITE:
if (alt_status) {
cmd->scmd->result = alt_status << 16;
exception = 1;
}
if (exception) {
atomic_dec(&instance->fw_outstanding);
scsi_dma_unmap(cmd->scmd);
cmd->scmd->scsi_done(cmd->scmd);
megasas_return_cmd(instance, cmd);
break;
}
switch (hdr->cmd_status) {
case MFI_STAT_OK:
cmd->scmd->result = DID_OK << 16;
break;
case MFI_STAT_SCSI_IO_FAILED:
case MFI_STAT_LD_INIT_IN_PROGRESS:
cmd->scmd->result =
(DID_ERROR << 16) | hdr->scsi_status;
break;
case MFI_STAT_SCSI_DONE_WITH_ERROR:
cmd->scmd->result = (DID_OK << 16) | hdr->scsi_status;
if (hdr->scsi_status == SAM_STAT_CHECK_CONDITION) {
memset(cmd->scmd->sense_buffer, 0,
SCSI_SENSE_BUFFERSIZE);
memcpy(cmd->scmd->sense_buffer, cmd->sense,
hdr->sense_len);
cmd->scmd->result |= DRIVER_SENSE << 24;
}
break;
case MFI_STAT_LD_OFFLINE:
case MFI_STAT_DEVICE_NOT_FOUND:
cmd->scmd->result = DID_BAD_TARGET << 16;
break;
default:
dev_printk(KERN_DEBUG, &instance->pdev->dev, "MFI FW status %#x\n",
hdr->cmd_status);
cmd->scmd->result = DID_ERROR << 16;
break;
}
atomic_dec(&instance->fw_outstanding);
scsi_dma_unmap(cmd->scmd);
cmd->scmd->scsi_done(cmd->scmd);
megasas_return_cmd(instance, cmd);
break;
case MFI_CMD_SMP:
case MFI_CMD_STP:
case MFI_CMD_DCMD:
opcode = le32_to_cpu(cmd->frame->dcmd.opcode);
/* Check for LD map update */
if ((opcode == MR_DCMD_LD_MAP_GET_INFO)
&& (cmd->frame->dcmd.mbox.b[1] == 1)) {
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
fusion->fast_path_io = 0;
spin_lock_irqsave(instance->host->host_lock, flags);
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
instance->map_update_cmd = NULL;
if (cmd->frame->hdr.cmd_status != 0) {
if (cmd->frame->hdr.cmd_status !=
MFI_STAT_NOT_FOUND)
dev_warn(&instance->pdev->dev, "map syncfailed, status = 0x%x\n",
cmd->frame->hdr.cmd_status);
else {
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(instance, cmd);
spin_unlock_irqrestore(
instance->host->host_lock,
flags);
break;
}
} else
instance->map_id++;
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(instance, cmd);
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
/*
* Set fast path IO to ZERO.
* Validate Map will set proper value.
* Meanwhile all IOs will go as LD IO.
*/
if (MR_ValidateMapInfo(instance))
fusion->fast_path_io = 1;
else
fusion->fast_path_io = 0;
megasas_sync_map_info(instance);
spin_unlock_irqrestore(instance->host->host_lock,
flags);
break;
}
if (opcode == MR_DCMD_CTRL_EVENT_GET_INFO ||
opcode == MR_DCMD_CTRL_EVENT_GET) {
spin_lock_irqsave(&poll_aen_lock, flags);
megasas_poll_wait_aen = 0;
spin_unlock_irqrestore(&poll_aen_lock, flags);
}
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
/* FW has an updated PD sequence */
if ((opcode == MR_DCMD_SYSTEM_PD_MAP_GET_INFO) &&
(cmd->frame->dcmd.mbox.b[0] == 1)) {
spin_lock_irqsave(instance->host->host_lock, flags);
status = cmd->frame->hdr.cmd_status;
instance->jbod_seq_cmd = NULL;
megasas_return_cmd(instance, cmd);
if (status == MFI_STAT_OK) {
instance->pd_seq_map_id++;
/* Re-register a pd sync seq num cmd */
if (megasas_sync_pd_seq_num(instance, true))
instance->use_seqnum_jbod_fp = false;
} else
instance->use_seqnum_jbod_fp = false;
spin_unlock_irqrestore(instance->host->host_lock, flags);
break;
}
/*
* See if got an event notification
*/
if (opcode == MR_DCMD_CTRL_EVENT_WAIT)
megasas_service_aen(instance, cmd);
else
megasas_complete_int_cmd(instance, cmd);
break;
case MFI_CMD_ABORT:
/*
* Cmd issued to abort another cmd returned
*/
megasas_complete_abort(instance, cmd);
break;
default:
dev_info(&instance->pdev->dev, "Unknown command completed! [0x%X]\n",
hdr->cmd);
break;
}
}
/**
* megasas_issue_pending_cmds_again - issue all pending cmds
* in FW again because of the fw reset
* @instance: Adapter soft state
*/
static inline void
megasas_issue_pending_cmds_again(struct megasas_instance *instance)
{
struct megasas_cmd *cmd;
struct list_head clist_local;
union megasas_evt_class_locale class_locale;
unsigned long flags;
u32 seq_num;
INIT_LIST_HEAD(&clist_local);
spin_lock_irqsave(&instance->hba_lock, flags);
list_splice_init(&instance->internal_reset_pending_q, &clist_local);
spin_unlock_irqrestore(&instance->hba_lock, flags);
while (!list_empty(&clist_local)) {
cmd = list_entry((&clist_local)->next,
struct megasas_cmd, list);
list_del_init(&cmd->list);
if (cmd->sync_cmd || cmd->scmd) {
dev_notice(&instance->pdev->dev, "command %p, %p:%d"
"detected to be pending while HBA reset\n",
cmd, cmd->scmd, cmd->sync_cmd);
cmd->retry_for_fw_reset++;
if (cmd->retry_for_fw_reset == 3) {
dev_notice(&instance->pdev->dev, "cmd %p, %p:%d"
"was tried multiple times during reset."
"Shutting down the HBA\n",
cmd, cmd->scmd, cmd->sync_cmd);
instance->instancet->disable_intr(instance);
atomic_set(&instance->fw_reset_no_pci_access, 1);
megaraid_sas_kill_hba(instance);
return;
}
}
if (cmd->sync_cmd == 1) {
if (cmd->scmd) {
dev_notice(&instance->pdev->dev, "unexpected"
"cmd attached to internal command!\n");
}
dev_notice(&instance->pdev->dev, "%p synchronous cmd"
"on the internal reset queue,"
"issue it again.\n", cmd);
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
cmd->cmd_status_drv = MFI_STAT_INVALID_STATUS;
instance->instancet->fire_cmd(instance,
cmd->frame_phys_addr,
0, instance->reg_set);
} else if (cmd->scmd) {
dev_notice(&instance->pdev->dev, "%p scsi cmd [%02x]"
"detected on the internal queue, issue again.\n",
cmd, cmd->scmd->cmnd[0]);
atomic_inc(&instance->fw_outstanding);
instance->instancet->fire_cmd(instance,
cmd->frame_phys_addr,
cmd->frame_count-1, instance->reg_set);
} else {
dev_notice(&instance->pdev->dev, "%p unexpected cmd on the"
"internal reset defer list while re-issue!!\n",
cmd);
}
}
if (instance->aen_cmd) {
dev_notice(&instance->pdev->dev, "aen_cmd in def process\n");
megasas_return_cmd(instance, instance->aen_cmd);
instance->aen_cmd = NULL;
}
/*
* Initiate AEN (Asynchronous Event Notification)
*/
seq_num = instance->last_seq_num;
class_locale.members.reserved = 0;
class_locale.members.locale = MR_EVT_LOCALE_ALL;
class_locale.members.class = MR_EVT_CLASS_DEBUG;
megasas_register_aen(instance, seq_num, class_locale.word);
}
/**
* Move the internal reset pending commands to a deferred queue.
*
* We move the commands pending at internal reset time to a
* pending queue. This queue would be flushed after successful
* completion of the internal reset sequence. if the internal reset
* did not complete in time, the kernel reset handler would flush
* these commands.
**/
static void
megasas_internal_reset_defer_cmds(struct megasas_instance *instance)
{
struct megasas_cmd *cmd;
int i;
u16 max_cmd = instance->max_fw_cmds;
u32 defer_index;
unsigned long flags;
defer_index = 0;
spin_lock_irqsave(&instance->mfi_pool_lock, flags);
for (i = 0; i < max_cmd; i++) {
cmd = instance->cmd_list[i];
if (cmd->sync_cmd == 1 || cmd->scmd) {
dev_notice(&instance->pdev->dev, "moving cmd[%d]:%p:%d:%p"
"on the defer queue as internal\n",
defer_index, cmd, cmd->sync_cmd, cmd->scmd);
if (!list_empty(&cmd->list)) {
dev_notice(&instance->pdev->dev, "ERROR while"
" moving this cmd:%p, %d %p, it was"
"discovered on some list?\n",
cmd, cmd->sync_cmd, cmd->scmd);
list_del_init(&cmd->list);
}
defer_index++;
list_add_tail(&cmd->list,
&instance->internal_reset_pending_q);
}
}
spin_unlock_irqrestore(&instance->mfi_pool_lock, flags);
}
static void
process_fw_state_change_wq(struct work_struct *work)
{
struct megasas_instance *instance =
container_of(work, struct megasas_instance, work_init);
u32 wait;
unsigned long flags;
if (atomic_read(&instance->adprecovery) != MEGASAS_ADPRESET_SM_INFAULT) {
dev_notice(&instance->pdev->dev, "error, recovery st %x\n",
atomic_read(&instance->adprecovery));
return ;
}
if (atomic_read(&instance->adprecovery) == MEGASAS_ADPRESET_SM_INFAULT) {
dev_notice(&instance->pdev->dev, "FW detected to be in fault"
"state, restarting it...\n");
instance->instancet->disable_intr(instance);
atomic_set(&instance->fw_outstanding, 0);
atomic_set(&instance->fw_reset_no_pci_access, 1);
instance->instancet->adp_reset(instance, instance->reg_set);
atomic_set(&instance->fw_reset_no_pci_access, 0);
dev_notice(&instance->pdev->dev, "FW restarted successfully,"
"initiating next stage...\n");
dev_notice(&instance->pdev->dev, "HBA recovery state machine,"
"state 2 starting...\n");
/* waiting for about 20 second before start the second init */
for (wait = 0; wait < 30; wait++) {
msleep(1000);
}
if (megasas_transition_to_ready(instance, 1)) {
dev_notice(&instance->pdev->dev, "adapter not ready\n");
atomic_set(&instance->fw_reset_no_pci_access, 1);
megaraid_sas_kill_hba(instance);
return ;
}
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1064R) ||
(instance->pdev->device == PCI_DEVICE_ID_DELL_PERC5) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_VERDE_ZCR)
) {
*instance->consumer = *instance->producer;
} else {
*instance->consumer = 0;
*instance->producer = 0;
}
megasas_issue_init_mfi(instance);
spin_lock_irqsave(&instance->hba_lock, flags);
atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL);
spin_unlock_irqrestore(&instance->hba_lock, flags);
instance->instancet->enable_intr(instance);
megasas_issue_pending_cmds_again(instance);
instance->issuepend_done = 1;
}
}
/**
* megasas_deplete_reply_queue - Processes all completed commands
* @instance: Adapter soft state
* @alt_status: Alternate status to be returned to
* SCSI mid-layer instead of the status
* returned by the FW
* Note: this must be called with hba lock held
*/
static int
megasas_deplete_reply_queue(struct megasas_instance *instance,
u8 alt_status)
{
u32 mfiStatus;
u32 fw_state;
if ((mfiStatus = instance->instancet->check_reset(instance,
instance->reg_set)) == 1) {
return IRQ_HANDLED;
}
if ((mfiStatus = instance->instancet->clear_intr(
instance->reg_set)
) == 0) {
/* Hardware may not set outbound_intr_status in MSI-X mode */
if (!instance->msix_vectors)
return IRQ_NONE;
}
instance->mfiStatus = mfiStatus;
if ((mfiStatus & MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE)) {
fw_state = instance->instancet->read_fw_status_reg(
instance->reg_set) & MFI_STATE_MASK;
if (fw_state != MFI_STATE_FAULT) {
dev_notice(&instance->pdev->dev, "fw state:%x\n",
fw_state);
}
if ((fw_state == MFI_STATE_FAULT) &&
(instance->disableOnlineCtrlReset == 0)) {
dev_notice(&instance->pdev->dev, "wait adp restart\n");
if ((instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS1064R) ||
(instance->pdev->device ==
PCI_DEVICE_ID_DELL_PERC5) ||
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_VERDE_ZCR)) {
*instance->consumer =
cpu_to_le32(MEGASAS_ADPRESET_INPROG_SIGN);
}
instance->instancet->disable_intr(instance);
atomic_set(&instance->adprecovery, MEGASAS_ADPRESET_SM_INFAULT);
instance->issuepend_done = 0;
atomic_set(&instance->fw_outstanding, 0);
megasas_internal_reset_defer_cmds(instance);
dev_notice(&instance->pdev->dev, "fwState=%x, stage:%d\n",
fw_state, atomic_read(&instance->adprecovery));
schedule_work(&instance->work_init);
return IRQ_HANDLED;
} else {
dev_notice(&instance->pdev->dev, "fwstate:%x, dis_OCR=%x\n",
fw_state, instance->disableOnlineCtrlReset);
}
}
tasklet_schedule(&instance->isr_tasklet);
return IRQ_HANDLED;
}
/**
* megasas_isr - isr entry point
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t megasas_isr(int irq, void *devp)
{
struct megasas_irq_context *irq_context = devp;
struct megasas_instance *instance = irq_context->instance;
unsigned long flags;
irqreturn_t rc;
if (atomic_read(&instance->fw_reset_no_pci_access))
return IRQ_HANDLED;
spin_lock_irqsave(&instance->hba_lock, flags);
rc = megasas_deplete_reply_queue(instance, DID_OK);
spin_unlock_irqrestore(&instance->hba_lock, flags);
return rc;
}
/**
* megasas_transition_to_ready - Move the FW to READY state
* @instance: Adapter soft state
*
* During the initialization, FW passes can potentially be in any one of
* several possible states. If the FW in operational, waiting-for-handshake
* states, driver must take steps to bring it to ready state. Otherwise, it
* has to wait for the ready state.
*/
int
megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
{
int i;
u8 max_wait;
u32 fw_state;
u32 cur_state;
u32 abs_state, curr_abs_state;
abs_state = instance->instancet->read_fw_status_reg(instance->reg_set);
fw_state = abs_state & MFI_STATE_MASK;
if (fw_state != MFI_STATE_READY)
dev_info(&instance->pdev->dev, "Waiting for FW to come to ready"
" state\n");
while (fw_state != MFI_STATE_READY) {
switch (fw_state) {
case MFI_STATE_FAULT:
dev_printk(KERN_DEBUG, &instance->pdev->dev, "FW in FAULT state!!\n");
if (ocr) {
max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_FAULT;
break;
} else
return -ENODEV;
case MFI_STATE_WAIT_HANDSHAKE:
/*
* Set the CLR bit in inbound doorbell
*/
if ((instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
(instance->ctrl_context))
writel(
MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
&instance->reg_set->doorbell);
else
writel(
MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
&instance->reg_set->inbound_doorbell);
max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_WAIT_HANDSHAKE;
break;
case MFI_STATE_BOOT_MESSAGE_PENDING:
if ((instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
(instance->ctrl_context))
writel(MFI_INIT_HOTPLUG,
&instance->reg_set->doorbell);
else
writel(MFI_INIT_HOTPLUG,
&instance->reg_set->inbound_doorbell);
max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_BOOT_MESSAGE_PENDING;
break;
case MFI_STATE_OPERATIONAL:
/*
* Bring it to READY state; assuming max wait 10 secs
*/
instance->instancet->disable_intr(instance);
if ((instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
(instance->ctrl_context)) {
writel(MFI_RESET_FLAGS,
&instance->reg_set->doorbell);
if (instance->ctrl_context) {
for (i = 0; i < (10 * 1000); i += 20) {
if (readl(
&instance->
reg_set->
doorbell) & 1)
msleep(20);
else
break;
}
}
} else
writel(MFI_RESET_FLAGS,
&instance->reg_set->inbound_doorbell);
max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_OPERATIONAL;
break;
case MFI_STATE_UNDEFINED:
/*
* This state should not last for more than 2 seconds
*/
max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_UNDEFINED;
break;
case MFI_STATE_BB_INIT:
max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_BB_INIT;
break;
case MFI_STATE_FW_INIT:
max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_FW_INIT;
break;
case MFI_STATE_FW_INIT_2:
max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_FW_INIT_2;
break;
case MFI_STATE_DEVICE_SCAN:
max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_DEVICE_SCAN;
break;
case MFI_STATE_FLUSH_CACHE:
max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_FLUSH_CACHE;
break;
default:
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Unknown state 0x%x\n",
fw_state);
return -ENODEV;
}
/*
* The cur_state should not last for more than max_wait secs
*/
for (i = 0; i < (max_wait * 1000); i++) {
curr_abs_state = instance->instancet->
read_fw_status_reg(instance->reg_set);
if (abs_state == curr_abs_state) {
msleep(1);
} else
break;
}
/*
* Return error if fw_state hasn't changed after max_wait
*/
if (curr_abs_state == abs_state) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "FW state [%d] hasn't changed "
"in %d secs\n", fw_state, max_wait);
return -ENODEV;
}
abs_state = curr_abs_state;
fw_state = curr_abs_state & MFI_STATE_MASK;
}
dev_info(&instance->pdev->dev, "FW now in Ready state\n");
return 0;
}
/**
* megasas_teardown_frame_pool - Destroy the cmd frame DMA pool
* @instance: Adapter soft state
*/
static void megasas_teardown_frame_pool(struct megasas_instance *instance)
{
int i;
u16 max_cmd = instance->max_mfi_cmds;
struct megasas_cmd *cmd;
if (!instance->frame_dma_pool)
return;
/*
* Return all frames to pool
*/
for (i = 0; i < max_cmd; i++) {
cmd = instance->cmd_list[i];
if (cmd->frame)
dma_pool_free(instance->frame_dma_pool, cmd->frame,
cmd->frame_phys_addr);
if (cmd->sense)
dma_pool_free(instance->sense_dma_pool, cmd->sense,
cmd->sense_phys_addr);
}
/*
* Now destroy the pool itself
*/
dma_pool_destroy(instance->frame_dma_pool);
dma_pool_destroy(instance->sense_dma_pool);
instance->frame_dma_pool = NULL;
instance->sense_dma_pool = NULL;
}
/**
* megasas_create_frame_pool - Creates DMA pool for cmd frames
* @instance: Adapter soft state
*
* Each command packet has an embedded DMA memory buffer that is used for
* filling MFI frame and the SG list that immediately follows the frame. This
* function creates those DMA memory buffers for each command packet by using
* PCI pool facility.
*/
static int megasas_create_frame_pool(struct megasas_instance *instance)
{
int i;
u16 max_cmd;
u32 sge_sz;
u32 frame_count;
struct megasas_cmd *cmd;
max_cmd = instance->max_mfi_cmds;
/*
* Size of our frame is 64 bytes for MFI frame, followed by max SG
* elements and finally SCSI_SENSE_BUFFERSIZE bytes for sense buffer
*/
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
sizeof(struct megasas_sge32);
if (instance->flag_ieee)
sge_sz = sizeof(struct megasas_sge_skinny);
/*
* For MFI controllers.
* max_num_sge = 60
* max_sge_sz = 16 byte (sizeof megasas_sge_skinny)
* Total 960 byte (15 MFI frame of 64 byte)
*
* Fusion adapter require only 3 extra frame.
* max_num_sge = 16 (defined as MAX_IOCTL_SGE)
* max_sge_sz = 12 byte (sizeof megasas_sge64)
* Total 192 byte (3 MFI frame of 64 byte)
*/
frame_count = instance->ctrl_context ? (3 + 1) : (15 + 1);
instance->mfi_frame_size = MEGAMFI_FRAME_SIZE * frame_count;
/*
* Use DMA pool facility provided by PCI layer
*/
instance->frame_dma_pool = dma_pool_create("megasas frame pool",
&instance->pdev->dev,
instance->mfi_frame_size, 256, 0);
if (!instance->frame_dma_pool) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "failed to setup frame pool\n");
return -ENOMEM;
}
instance->sense_dma_pool = dma_pool_create("megasas sense pool",
&instance->pdev->dev, 128,
4, 0);
if (!instance->sense_dma_pool) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "failed to setup sense pool\n");
dma_pool_destroy(instance->frame_dma_pool);
instance->frame_dma_pool = NULL;
return -ENOMEM;
}
/*
* Allocate and attach a frame to each of the commands in cmd_list.
* By making cmd->index as the context instead of the &cmd, we can
* always use 32bit context regardless of the architecture
*/
for (i = 0; i < max_cmd; i++) {
cmd = instance->cmd_list[i];
cmd->frame = dma_pool_alloc(instance->frame_dma_pool,
GFP_KERNEL, &cmd->frame_phys_addr);
cmd->sense = dma_pool_alloc(instance->sense_dma_pool,
GFP_KERNEL, &cmd->sense_phys_addr);
/*
* megasas_teardown_frame_pool() takes care of freeing
* whatever has been allocated
*/
if (!cmd->frame || !cmd->sense) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "dma_pool_alloc failed\n");
megasas_teardown_frame_pool(instance);
return -ENOMEM;
}
memset(cmd->frame, 0, instance->mfi_frame_size);
cmd->frame->io.context = cpu_to_le32(cmd->index);
cmd->frame->io.pad_0 = 0;
if (!instance->ctrl_context && reset_devices)
cmd->frame->hdr.cmd = MFI_CMD_INVALID;
}
return 0;
}
/**
* megasas_free_cmds - Free all the cmds in the free cmd pool
* @instance: Adapter soft state
*/
void megasas_free_cmds(struct megasas_instance *instance)
{
int i;
/* First free the MFI frame pool */
megasas_teardown_frame_pool(instance);
/* Free all the commands in the cmd_list */
for (i = 0; i < instance->max_mfi_cmds; i++)
kfree(instance->cmd_list[i]);
/* Free the cmd_list buffer itself */
kfree(instance->cmd_list);
instance->cmd_list = NULL;
INIT_LIST_HEAD(&instance->cmd_pool);
}
/**
* megasas_alloc_cmds - Allocates the command packets
* @instance: Adapter soft state
*
* Each command that is issued to the FW, whether IO commands from the OS or
* internal commands like IOCTLs, are wrapped in local data structure called
* megasas_cmd. The frame embedded in this megasas_cmd is actually issued to
* the FW.
*
* Each frame has a 32-bit field called context (tag). This context is used
* to get back the megasas_cmd from the frame when a frame gets completed in
* the ISR. Typically the address of the megasas_cmd itself would be used as
* the context. But we wanted to keep the differences between 32 and 64 bit
* systems to the mininum. We always use 32 bit integers for the context. In
* this driver, the 32 bit values are the indices into an array cmd_list.
* This array is used only to look up the megasas_cmd given the context. The
* free commands themselves are maintained in a linked list called cmd_pool.
*/
int megasas_alloc_cmds(struct megasas_instance *instance)
{
int i;
int j;
u16 max_cmd;
struct megasas_cmd *cmd;
struct fusion_context *fusion;
fusion = instance->ctrl_context;
max_cmd = instance->max_mfi_cmds;
/*
* instance->cmd_list is an array of struct megasas_cmd pointers.
* Allocate the dynamic array first and then allocate individual
* commands.
*/
2007-07-19 16:49:03 +08:00
instance->cmd_list = kcalloc(max_cmd, sizeof(struct megasas_cmd*), GFP_KERNEL);
if (!instance->cmd_list) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "out of memory\n");
return -ENOMEM;
}
memset(instance->cmd_list, 0, sizeof(struct megasas_cmd *) *max_cmd);
for (i = 0; i < max_cmd; i++) {
instance->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd),
GFP_KERNEL);
if (!instance->cmd_list[i]) {
for (j = 0; j < i; j++)
kfree(instance->cmd_list[j]);
kfree(instance->cmd_list);
instance->cmd_list = NULL;
return -ENOMEM;
}
}
for (i = 0; i < max_cmd; i++) {
cmd = instance->cmd_list[i];
memset(cmd, 0, sizeof(struct megasas_cmd));
cmd->index = i;
cmd->scmd = NULL;
cmd->instance = instance;
list_add_tail(&cmd->list, &instance->cmd_pool);
}
/*
* Create a frame pool and assign one frame to each cmd
*/
if (megasas_create_frame_pool(instance)) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Error creating frame DMA pool\n");
megasas_free_cmds(instance);
}
return 0;
}
/*
* dcmd_timeout_ocr_possible - Check if OCR is possible based on Driver/FW state.
* @instance: Adapter soft state
*
* Return 0 for only Fusion adapter, if driver load/unload is not in progress
* or FW is not under OCR.
*/
inline int
dcmd_timeout_ocr_possible(struct megasas_instance *instance) {
if (!instance->ctrl_context)
return KILL_ADAPTER;
else if (instance->unload ||
test_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags))
return IGNORE_TIMEOUT;
else
return INITIATE_OCR;
}
static void
megasas_get_pd_info(struct megasas_instance *instance, struct scsi_device *sdev)
{
int ret;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
struct MR_PRIV_DEVICE *mr_device_priv_data;
u16 device_id = 0;
device_id = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + sdev->id;
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_err(&instance->pdev->dev, "Failed to get cmd %s\n", __func__);
return;
}
dcmd = &cmd->frame->dcmd;
memset(instance->pd_info, 0, sizeof(*instance->pd_info));
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->mbox.s[0] = cpu_to_le16(device_id);
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0xFF;
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_PD_INFO));
dcmd->opcode = cpu_to_le32(MR_DCMD_PD_GET_INFO);
dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(instance->pd_info_h);
dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct MR_PD_INFO));
if (instance->ctrl_context && !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
switch (ret) {
case DCMD_SUCCESS:
mr_device_priv_data = sdev->hostdata;
le16_to_cpus((u16 *)&instance->pd_info->state.ddf.pdType);
mr_device_priv_data->interface_type =
instance->pd_info->state.ddf.pdType.intf;
break;
case DCMD_TIMEOUT:
switch (dcmd_timeout_ocr_possible(instance)) {
case INITIATE_OCR:
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
megasas_reset_fusion(instance->host,
MFI_IO_TIMEOUT_OCR);
break;
case KILL_ADAPTER:
megaraid_sas_kill_hba(instance);
break;
case IGNORE_TIMEOUT:
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d\n",
__func__, __LINE__);
break;
}
break;
}
if (ret != DCMD_TIMEOUT)
megasas_return_cmd(instance, cmd);
return;
}
/*
* megasas_get_pd_list_info - Returns FW's pd_list structure
* @instance: Adapter soft state
* @pd_list: pd_list structure
*
* Issues an internal command (DCMD) to get the FW's controller PD
* list structure. This information is mainly used to find out SYSTEM
* supported by the FW.
*/
static int
megasas_get_pd_list(struct megasas_instance *instance)
{
int ret = 0, pd_index = 0;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
struct MR_PD_LIST *ci;
struct MR_PD_ADDRESS *pd_addr;
dma_addr_t ci_h = 0;
megaraid_sas: Do not fire MR_DCMD_PD_LIST_QUERY to controllers which do not support it There was an issue reported by Lucz Geza on Dell Perc 6i. As per issue reported, megaraid_sas driver goes into an infinite error reporting loop as soon as there is a change in the status of one of the arrays (degrade, resync online etc ). Below are the error logs reported continuously- Jun 25 08:49:30 ns8 kernel: [ 757.757017] megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware: megasas_get_pd_list 4115 Jun 25 08:49:30 ns8 kernel: [ 757.778017] megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware: megasas_get_pd_list 4115 Jun 25 08:49:30 ns8 kernel: [ 757.799017] megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware: megasas_get_pd_list 4115 Jun 25 08:49:30 ns8 kernel: [ 757.820018] megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware: megasas_get_pd_list 4115 Jun 25 08:49:30 ns8 kernel: [ 757.841018] megaraid_sas 0000:02:00.0: DCMD failed/not supported by firmware: megasas_get_pd_list 4115 This issue is very much specific to controllers which do not support DCMD- MR_DCMD_PD_LIST_QUERY. In case of any hotplugging/rescanning of drives, AEN thread will be scheduled by driver and fire DCMD- MR_DCMD_PD_LIST_QUERY and if this DCMD is failed then driver will fail this event processing and will not go ahead for further events. This will cause infinite loop of same event getting retried infinitely and causing above mentioned logs. Fix for this problem is: not to fire DCMD MR_DCMD_PD_LIST_QUERY for controllers which do not support it and send DCMD SUCCESS status to AEN function so that it can go ahead with other event processing. Reported-by: Lucz Geza <geza@lucz.com> Cc: <stable@vger.kernel.org> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-08 18:30:16 +08:00
if (instance->pd_list_not_supported) {
dev_info(&instance->pdev->dev, "MR_DCMD_PD_LIST_QUERY "
"not supported by firmware\n");
return ret;
}
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "(get_pd_list): Failed to get cmd\n");
return -ENOMEM;
}
dcmd = &cmd->frame->dcmd;
ci = pci_alloc_consistent(instance->pdev,
MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST), &ci_h);
if (!ci) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to alloc mem for pd_list\n");
megasas_return_cmd(instance, cmd);
return -ENOMEM;
}
memset(ci, 0, sizeof(*ci));
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->mbox.b[0] = MR_PD_QUERY_TYPE_EXPOSED_TO_HOST;
dcmd->mbox.b[1] = 0;
dcmd->cmd = MFI_CMD_DCMD;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST));
dcmd->opcode = cpu_to_le32(MR_DCMD_PD_LIST_QUERY);
dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(ci_h);
dcmd->sgl.sge32[0].length = cpu_to_le32(MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST));
if (instance->ctrl_context && !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd,
MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
switch (ret) {
case DCMD_FAILED:
dev_info(&instance->pdev->dev, "MR_DCMD_PD_LIST_QUERY "
"failed/not supported by firmware\n");
if (instance->ctrl_context)
megaraid_sas_kill_hba(instance);
else
instance->pd_list_not_supported = 1;
break;
case DCMD_TIMEOUT:
switch (dcmd_timeout_ocr_possible(instance)) {
case INITIATE_OCR:
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
/*
* DCMD failed from AEN path.
* AEN path already hold reset_mutex to avoid PCI access
* while OCR is in progress.
*/
mutex_unlock(&instance->reset_mutex);
megasas_reset_fusion(instance->host,
MFI_IO_TIMEOUT_OCR);
mutex_lock(&instance->reset_mutex);
break;
case KILL_ADAPTER:
megaraid_sas_kill_hba(instance);
break;
case IGNORE_TIMEOUT:
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d \n",
__func__, __LINE__);
break;
}
break;
case DCMD_SUCCESS:
pd_addr = ci->addr;
if ((le32_to_cpu(ci->count) >
(MEGASAS_MAX_PD_CHANNELS * MEGASAS_MAX_DEV_PER_CHANNEL)))
break;
memset(instance->local_pd_list, 0,
MEGASAS_MAX_PD * sizeof(struct megasas_pd_list));
for (pd_index = 0; pd_index < le32_to_cpu(ci->count); pd_index++) {
instance->local_pd_list[le16_to_cpu(pd_addr->deviceId)].tid =
le16_to_cpu(pd_addr->deviceId);
instance->local_pd_list[le16_to_cpu(pd_addr->deviceId)].driveType =
pd_addr->scsiDevType;
instance->local_pd_list[le16_to_cpu(pd_addr->deviceId)].driveState =
MR_PD_STATE_SYSTEM;
pd_addr++;
}
memcpy(instance->pd_list, instance->local_pd_list,
sizeof(instance->pd_list));
break;
}
pci_free_consistent(instance->pdev,
MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST),
ci, ci_h);
if (ret != DCMD_TIMEOUT)
megasas_return_cmd(instance, cmd);
return ret;
}
/*
* megasas_get_ld_list_info - Returns FW's ld_list structure
* @instance: Adapter soft state
* @ld_list: ld_list structure
*
* Issues an internal command (DCMD) to get the FW's controller PD
* list structure. This information is mainly used to find out SYSTEM
* supported by the FW.
*/
static int
megasas_get_ld_list(struct megasas_instance *instance)
{
int ret = 0, ld_index = 0, ids = 0;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
struct MR_LD_LIST *ci;
dma_addr_t ci_h = 0;
u32 ld_count;
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "megasas_get_ld_list: Failed to get cmd\n");
return -ENOMEM;
}
dcmd = &cmd->frame->dcmd;
ci = pci_alloc_consistent(instance->pdev,
sizeof(struct MR_LD_LIST),
&ci_h);
if (!ci) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to alloc mem in get_ld_list\n");
megasas_return_cmd(instance, cmd);
return -ENOMEM;
}
memset(ci, 0, sizeof(*ci));
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
if (instance->supportmax256vd)
dcmd->mbox.b[0] = 1;
dcmd->cmd = MFI_CMD_DCMD;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
dcmd->timeout = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_LD_LIST));
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_GET_LIST);
dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(ci_h);
dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct MR_LD_LIST));
dcmd->pad_0 = 0;
if (instance->ctrl_context && !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd,
MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
ld_count = le32_to_cpu(ci->ldCount);
switch (ret) {
case DCMD_FAILED:
megaraid_sas_kill_hba(instance);
break;
case DCMD_TIMEOUT:
switch (dcmd_timeout_ocr_possible(instance)) {
case INITIATE_OCR:
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
/*
* DCMD failed from AEN path.
* AEN path already hold reset_mutex to avoid PCI access
* while OCR is in progress.
*/
mutex_unlock(&instance->reset_mutex);
megasas_reset_fusion(instance->host,
MFI_IO_TIMEOUT_OCR);
mutex_lock(&instance->reset_mutex);
break;
case KILL_ADAPTER:
megaraid_sas_kill_hba(instance);
break;
case IGNORE_TIMEOUT:
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d\n",
__func__, __LINE__);
break;
}
break;
case DCMD_SUCCESS:
if (ld_count > instance->fw_supported_vd_count)
break;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
memset(instance->ld_ids, 0xff, MAX_LOGICAL_DRIVES_EXT);
for (ld_index = 0; ld_index < ld_count; ld_index++) {
if (ci->ldList[ld_index].state != 0) {
ids = ci->ldList[ld_index].ref.targetId;
instance->ld_ids[ids] = ci->ldList[ld_index].ref.targetId;
}
}
break;
}
pci_free_consistent(instance->pdev, sizeof(struct MR_LD_LIST), ci, ci_h);
if (ret != DCMD_TIMEOUT)
megasas_return_cmd(instance, cmd);
return ret;
}
/**
* megasas_ld_list_query - Returns FW's ld_list structure
* @instance: Adapter soft state
* @ld_list: ld_list structure
*
* Issues an internal command (DCMD) to get the FW's controller PD
* list structure. This information is mainly used to find out SYSTEM
* supported by the FW.
*/
static int
megasas_ld_list_query(struct megasas_instance *instance, u8 query_type)
{
int ret = 0, ld_index = 0, ids = 0;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
struct MR_LD_TARGETID_LIST *ci;
dma_addr_t ci_h = 0;
u32 tgtid_count;
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_warn(&instance->pdev->dev,
"megasas_ld_list_query: Failed to get cmd\n");
return -ENOMEM;
}
dcmd = &cmd->frame->dcmd;
ci = pci_alloc_consistent(instance->pdev,
sizeof(struct MR_LD_TARGETID_LIST), &ci_h);
if (!ci) {
dev_warn(&instance->pdev->dev,
"Failed to alloc mem for ld_list_query\n");
megasas_return_cmd(instance, cmd);
return -ENOMEM;
}
memset(ci, 0, sizeof(*ci));
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->mbox.b[0] = query_type;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
if (instance->supportmax256vd)
dcmd->mbox.b[2] = 1;
dcmd->cmd = MFI_CMD_DCMD;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
dcmd->timeout = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_LD_TARGETID_LIST));
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_LIST_QUERY);
dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(ci_h);
dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct MR_LD_TARGETID_LIST));
dcmd->pad_0 = 0;
if (instance->ctrl_context && !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
switch (ret) {
case DCMD_FAILED:
dev_info(&instance->pdev->dev,
"DCMD not supported by firmware - %s %d\n",
__func__, __LINE__);
ret = megasas_get_ld_list(instance);
break;
case DCMD_TIMEOUT:
switch (dcmd_timeout_ocr_possible(instance)) {
case INITIATE_OCR:
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
/*
* DCMD failed from AEN path.
* AEN path already hold reset_mutex to avoid PCI access
* while OCR is in progress.
*/
mutex_unlock(&instance->reset_mutex);
megasas_reset_fusion(instance->host,
MFI_IO_TIMEOUT_OCR);
mutex_lock(&instance->reset_mutex);
break;
case KILL_ADAPTER:
megaraid_sas_kill_hba(instance);
break;
case IGNORE_TIMEOUT:
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d\n",
__func__, __LINE__);
break;
}
break;
case DCMD_SUCCESS:
tgtid_count = le32_to_cpu(ci->count);
if ((tgtid_count > (instance->fw_supported_vd_count)))
break;
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
for (ld_index = 0; ld_index < tgtid_count; ld_index++) {
ids = ci->targetId[ld_index];
instance->ld_ids[ids] = ci->targetId[ld_index];
}
break;
}
pci_free_consistent(instance->pdev, sizeof(struct MR_LD_TARGETID_LIST),
ci, ci_h);
if (ret != DCMD_TIMEOUT)
megasas_return_cmd(instance, cmd);
return ret;
}
/*
* megasas_update_ext_vd_details : Update details w.r.t Extended VD
* instance : Controller's instance
*/
static void megasas_update_ext_vd_details(struct megasas_instance *instance)
{
struct fusion_context *fusion;
u32 ventura_map_sz = 0;
fusion = instance->ctrl_context;
/* For MFI based controllers return dummy success */
if (!fusion)
return;
instance->supportmax256vd =
instance->ctrl_info->adapterOperations3.supportMaxExtLDs;
/* Below is additional check to address future FW enhancement */
if (instance->ctrl_info->max_lds > 64)
instance->supportmax256vd = 1;
instance->drv_supported_vd_count = MEGASAS_MAX_LD_CHANNELS
* MEGASAS_MAX_DEV_PER_CHANNEL;
instance->drv_supported_pd_count = MEGASAS_MAX_PD_CHANNELS
* MEGASAS_MAX_DEV_PER_CHANNEL;
if (instance->supportmax256vd) {
instance->fw_supported_vd_count = MAX_LOGICAL_DRIVES_EXT;
instance->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
} else {
instance->fw_supported_vd_count = MAX_LOGICAL_DRIVES;
instance->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
}
dev_info(&instance->pdev->dev,
"firmware type\t: %s\n",
instance->supportmax256vd ? "Extended VD(240 VD)firmware" :
"Legacy(64 VD) firmware");
if (instance->max_raid_mapsize) {
ventura_map_sz = instance->max_raid_mapsize *
MR_MIN_MAP_SIZE; /* 64k */
fusion->current_map_sz = ventura_map_sz;
fusion->max_map_sz = ventura_map_sz;
} else {
fusion->old_map_sz = sizeof(struct MR_FW_RAID_MAP) +
(sizeof(struct MR_LD_SPAN_MAP) *
(instance->fw_supported_vd_count - 1));
fusion->new_map_sz = sizeof(struct MR_FW_RAID_MAP_EXT);
fusion->max_map_sz =
max(fusion->old_map_sz, fusion->new_map_sz);
if (instance->supportmax256vd)
fusion->current_map_sz = fusion->new_map_sz;
else
fusion->current_map_sz = fusion->old_map_sz;
}
/* irrespective of FW raid maps, driver raid map is constant */
fusion->drv_map_sz = sizeof(struct MR_DRV_RAID_MAP_ALL);
}
/**
* megasas_get_controller_info - Returns FW's controller structure
* @instance: Adapter soft state
*
* Issues an internal command (DCMD) to get the FW's controller structure.
* This information is mainly used to find out the maximum IO transfer per
* command supported by the FW.
*/
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
int
megasas_get_ctrl_info(struct megasas_instance *instance)
{
int ret = 0;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
struct megasas_ctrl_info *ci;
struct megasas_ctrl_info *ctrl_info;
dma_addr_t ci_h = 0;
ctrl_info = instance->ctrl_info;
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to get a free cmd\n");
return -ENOMEM;
}
dcmd = &cmd->frame->dcmd;
ci = pci_alloc_consistent(instance->pdev,
sizeof(struct megasas_ctrl_info), &ci_h);
if (!ci) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to alloc mem for ctrl info\n");
megasas_return_cmd(instance, cmd);
return -ENOMEM;
}
memset(ci, 0, sizeof(*ci));
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->cmd = MFI_CMD_DCMD;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct megasas_ctrl_info));
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_GET_INFO);
dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(ci_h);
dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct megasas_ctrl_info));
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
dcmd->mbox.b[0] = 1;
if (instance->ctrl_context && !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
switch (ret) {
case DCMD_SUCCESS:
memcpy(ctrl_info, ci, sizeof(struct megasas_ctrl_info));
/* Save required controller information in
* CPU endianness format.
*/
le32_to_cpus((u32 *)&ctrl_info->properties.OnOffProperties);
le32_to_cpus((u32 *)&ctrl_info->adapterOperations2);
le32_to_cpus((u32 *)&ctrl_info->adapterOperations3);
le16_to_cpus((u16 *)&ctrl_info->adapter_operations4);
/* Update the latest Ext VD info.
* From Init path, store current firmware details.
* From OCR path, detect any firmware properties changes.
* in case of Firmware upgrade without system reboot.
*/
megasas_update_ext_vd_details(instance);
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
instance->use_seqnum_jbod_fp =
ctrl_info->adapterOperations3.useSeqNumJbodFP;
instance->support_morethan256jbod =
ctrl_info->adapter_operations4.support_pd_map_target_id;
/*Check whether controller is iMR or MR */
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
instance->is_imr = (ctrl_info->memory_size ? 0 : 1);
dev_info(&instance->pdev->dev,
"controller type\t: %s(%dMB)\n",
instance->is_imr ? "iMR" : "MR",
le16_to_cpu(ctrl_info->memory_size));
instance->disableOnlineCtrlReset =
ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
instance->secure_jbod_support =
ctrl_info->adapterOperations3.supportSecurityonJBOD;
dev_info(&instance->pdev->dev, "Online Controller Reset(OCR)\t: %s\n",
instance->disableOnlineCtrlReset ? "Disabled" : "Enabled");
dev_info(&instance->pdev->dev, "Secure JBOD support\t: %s\n",
instance->secure_jbod_support ? "Yes" : "No");
break;
case DCMD_TIMEOUT:
switch (dcmd_timeout_ocr_possible(instance)) {
case INITIATE_OCR:
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
megasas_reset_fusion(instance->host,
MFI_IO_TIMEOUT_OCR);
break;
case KILL_ADAPTER:
megaraid_sas_kill_hba(instance);
break;
case IGNORE_TIMEOUT:
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d\n",
__func__, __LINE__);
break;
}
case DCMD_FAILED:
megaraid_sas_kill_hba(instance);
break;
}
pci_free_consistent(instance->pdev, sizeof(struct megasas_ctrl_info),
ci, ci_h);
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(instance, cmd);
return ret;
}
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
/*
* megasas_set_crash_dump_params - Sends address of crash dump DMA buffer
* to firmware
*
* @instance: Adapter soft state
* @crash_buf_state - tell FW to turn ON/OFF crash dump feature
MR_CRASH_BUF_TURN_OFF = 0
MR_CRASH_BUF_TURN_ON = 1
* @return 0 on success non-zero on failure.
* Issues an internal command (DCMD) to set parameters for crash dump feature.
* Driver will send address of crash dump DMA buffer and set mbox to tell FW
* that driver supports crash dump feature. This DCMD will be sent only if
* crash dump feature is supported by the FW.
*
*/
int megasas_set_crash_dump_params(struct megasas_instance *instance,
u8 crash_buf_state)
{
int ret = 0;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_err(&instance->pdev->dev, "Failed to get a free cmd\n");
return -ENOMEM;
}
dcmd = &cmd->frame->dcmd;
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->mbox.b[0] = crash_buf_state;
dcmd->cmd = MFI_CMD_DCMD;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_NONE);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(CRASH_DMA_BUF_SIZE);
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_SET_CRASH_DUMP_PARAMS);
dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(instance->crash_dump_h);
dcmd->sgl.sge32[0].length = cpu_to_le32(CRASH_DMA_BUF_SIZE);
if (instance->ctrl_context && !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
else
ret = megasas_issue_polled(instance, cmd);
if (ret == DCMD_TIMEOUT) {
switch (dcmd_timeout_ocr_possible(instance)) {
case INITIATE_OCR:
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
megasas_reset_fusion(instance->host,
MFI_IO_TIMEOUT_OCR);
break;
case KILL_ADAPTER:
megaraid_sas_kill_hba(instance);
break;
case IGNORE_TIMEOUT:
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d\n",
__func__, __LINE__);
break;
}
} else
megasas_return_cmd(instance, cmd);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
return ret;
}
/**
* megasas_issue_init_mfi - Initializes the FW
* @instance: Adapter soft state
*
* Issues the INIT MFI cmd
*/
static int
megasas_issue_init_mfi(struct megasas_instance *instance)
{
__le32 context;
struct megasas_cmd *cmd;
struct megasas_init_frame *init_frame;
struct megasas_init_queue_info *initq_info;
dma_addr_t init_frame_h;
dma_addr_t initq_info_h;
/*
* Prepare a init frame. Note the init frame points to queue info
* structure. Each frame has SGL allocated after first 64 bytes. For
* this frame - since we don't need any SGL - we use SGL's space as
* queue info structure
*
* We will not get a NULL command below. We just created the pool.
*/
cmd = megasas_get_cmd(instance);
init_frame = (struct megasas_init_frame *)cmd->frame;
initq_info = (struct megasas_init_queue_info *)
((unsigned long)init_frame + 64);
init_frame_h = cmd->frame_phys_addr;
initq_info_h = init_frame_h + 64;
context = init_frame->context;
memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
memset(initq_info, 0, sizeof(struct megasas_init_queue_info));
init_frame->context = context;
initq_info->reply_queue_entries = cpu_to_le32(instance->max_fw_cmds + 1);
initq_info->reply_queue_start_phys_addr_lo = cpu_to_le32(instance->reply_queue_h);
initq_info->producer_index_phys_addr_lo = cpu_to_le32(instance->producer_h);
initq_info->consumer_index_phys_addr_lo = cpu_to_le32(instance->consumer_h);
init_frame->cmd = MFI_CMD_INIT;
megaraid_sas : Modify return value of megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver. Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd(). The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query(). Cc: <stable@vger.kernel.org> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-06 21:31:02 +08:00
init_frame->cmd_status = MFI_STAT_INVALID_STATUS;
init_frame->queue_info_new_phys_addr_lo =
cpu_to_le32(lower_32_bits(initq_info_h));
init_frame->queue_info_new_phys_addr_hi =
cpu_to_le32(upper_32_bits(initq_info_h));
init_frame->data_xfer_len = cpu_to_le32(sizeof(struct megasas_init_queue_info));
/*
* disable the intr before firing the init frame to FW
*/
instance->instancet->disable_intr(instance);
/*
* Issue the init frame in polled mode
*/
if (megasas_issue_polled(instance, cmd)) {
dev_err(&instance->pdev->dev, "Failed to init firmware\n");
megasas_return_cmd(instance, cmd);
goto fail_fw_init;
}
megasas_return_cmd(instance, cmd);
return 0;
fail_fw_init:
return -EINVAL;
}
static u32
megasas_init_adapter_mfi(struct megasas_instance *instance)
{
struct megasas_register_set __iomem *reg_set;
u32 context_sz;
u32 reply_q_sz;
reg_set = instance->reg_set;
/*
* Get various operational parameters from status register
*/
instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
/*
* Reduce the max supported cmds by 1. This is to ensure that the
* reply_q_sz (1 more than the max cmd that driver may send)
* does not exceed max cmds that the FW can support
*/
instance->max_fw_cmds = instance->max_fw_cmds-1;
instance->max_mfi_cmds = instance->max_fw_cmds;
instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >>
0x10;
/*
* For MFI skinny adapters, MEGASAS_SKINNY_INT_CMDS commands
* are reserved for IOCTL + driver's internal DCMDs.
*/
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
instance->max_scsi_cmds = (instance->max_fw_cmds -
MEGASAS_SKINNY_INT_CMDS);
sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
} else {
instance->max_scsi_cmds = (instance->max_fw_cmds -
MEGASAS_INT_CMDS);
sema_init(&instance->ioctl_sem, (MEGASAS_MFI_IOCTL_CMDS));
}
instance->cur_can_queue = instance->max_scsi_cmds;
/*
* Create a pool of commands
*/
if (megasas_alloc_cmds(instance))
goto fail_alloc_cmds;
/*
* Allocate memory for reply queue. Length of reply queue should
* be _one_ more than the maximum commands handled by the firmware.
*
* Note: When FW completes commands, it places corresponding contex
* values in this circular reply queue. This circular queue is a fairly
* typical producer-consumer queue. FW is the producer (of completed
* commands) and the driver is the consumer.
*/
context_sz = sizeof(u32);
reply_q_sz = context_sz * (instance->max_fw_cmds + 1);
instance->reply_queue = pci_alloc_consistent(instance->pdev,
reply_q_sz,
&instance->reply_queue_h);
if (!instance->reply_queue) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Out of DMA mem for reply queue\n");
goto fail_reply_queue;
}
if (megasas_issue_init_mfi(instance))
goto fail_fw_init;
if (megasas_get_ctrl_info(instance)) {
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
dev_err(&instance->pdev->dev, "(%d): Could get controller info "
"Fail from %s %d\n", instance->unique_id,
__func__, __LINE__);
goto fail_fw_init;
}
instance->fw_support_ieee = 0;
instance->fw_support_ieee =
(instance->instancet->read_fw_status_reg(reg_set) &
0x04000000);
dev_notice(&instance->pdev->dev, "megasas_init_mfi: fw_support_ieee=%d",
instance->fw_support_ieee);
if (instance->fw_support_ieee)
instance->flag_ieee = 1;
return 0;
fail_fw_init:
pci_free_consistent(instance->pdev, reply_q_sz,
instance->reply_queue, instance->reply_queue_h);
fail_reply_queue:
megasas_free_cmds(instance);
fail_alloc_cmds:
return 1;
}
/*
* megasas_setup_irqs_ioapic - register legacy interrupts.
* @instance: Adapter soft state
*
* Do not enable interrupt, only setup ISRs.
*
* Return 0 on success.
*/
static int
megasas_setup_irqs_ioapic(struct megasas_instance *instance)
{
struct pci_dev *pdev;
pdev = instance->pdev;
instance->irq_context[0].instance = instance;
instance->irq_context[0].MSIxIndex = 0;
if (request_irq(pci_irq_vector(pdev, 0),
instance->instancet->service_isr, IRQF_SHARED,
"megasas", &instance->irq_context[0])) {
dev_err(&instance->pdev->dev,
"Failed to register IRQ from %s %d\n",
__func__, __LINE__);
return -1;
}
return 0;
}
/**
* megasas_setup_irqs_msix - register MSI-x interrupts.
* @instance: Adapter soft state
* @is_probe: Driver probe check
*
* Do not enable interrupt, only setup ISRs.
*
* Return 0 on success.
*/
static int
megasas_setup_irqs_msix(struct megasas_instance *instance, u8 is_probe)
{
int i, j;
struct pci_dev *pdev;
pdev = instance->pdev;
/* Try MSI-x */
for (i = 0; i < instance->msix_vectors; i++) {
instance->irq_context[i].instance = instance;
instance->irq_context[i].MSIxIndex = i;
if (request_irq(pci_irq_vector(pdev, i),
instance->instancet->service_isr, 0, "megasas",
&instance->irq_context[i])) {
dev_err(&instance->pdev->dev,
"Failed to register IRQ for vector %d.\n", i);
for (j = 0; j < i; j++)
free_irq(pci_irq_vector(pdev, j),
&instance->irq_context[j]);
/* Retry irq register for IO_APIC*/
instance->msix_vectors = 0;
if (is_probe) {
pci_free_irq_vectors(instance->pdev);
return megasas_setup_irqs_ioapic(instance);
} else {
return -1;
}
}
}
return 0;
}
/*
* megasas_destroy_irqs- unregister interrupts.
* @instance: Adapter soft state
* return: void
*/
static void
megasas_destroy_irqs(struct megasas_instance *instance) {
int i;
if (instance->msix_vectors)
for (i = 0; i < instance->msix_vectors; i++) {
free_irq(pci_irq_vector(instance->pdev, i),
&instance->irq_context[i]);
}
else
free_irq(pci_irq_vector(instance->pdev, 0),
&instance->irq_context[0]);
}
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
/**
* megasas_setup_jbod_map - setup jbod map for FP seq_number.
* @instance: Adapter soft state
* @is_probe: Driver probe check
*
* Return 0 on success.
*/
void
megasas_setup_jbod_map(struct megasas_instance *instance)
{
int i;
struct fusion_context *fusion = instance->ctrl_context;
u32 pd_seq_map_sz;
pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
(sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1));
if (reset_devices || !fusion ||
!instance->ctrl_info->adapterOperations3.useSeqNumJbodFP) {
dev_info(&instance->pdev->dev,
"Jbod map is not supported %s %d\n",
__func__, __LINE__);
instance->use_seqnum_jbod_fp = false;
return;
}
if (fusion->pd_seq_sync[0])
goto skip_alloc;
for (i = 0; i < JBOD_MAPS_COUNT; i++) {
fusion->pd_seq_sync[i] = dma_alloc_coherent
(&instance->pdev->dev, pd_seq_map_sz,
&fusion->pd_seq_phys[i], GFP_KERNEL);
if (!fusion->pd_seq_sync[i]) {
dev_err(&instance->pdev->dev,
"Failed to allocate memory from %s %d\n",
__func__, __LINE__);
if (i == 1) {
dma_free_coherent(&instance->pdev->dev,
pd_seq_map_sz, fusion->pd_seq_sync[0],
fusion->pd_seq_phys[0]);
fusion->pd_seq_sync[0] = NULL;
}
instance->use_seqnum_jbod_fp = false;
return;
}
}
skip_alloc:
if (!megasas_sync_pd_seq_num(instance, false) &&
!megasas_sync_pd_seq_num(instance, true))
instance->use_seqnum_jbod_fp = true;
else
instance->use_seqnum_jbod_fp = false;
}
/**
* megasas_init_fw - Initializes the FW
* @instance: Adapter soft state
*
* This is the main function for initializing firmware
*/
static int megasas_init_fw(struct megasas_instance *instance)
{
u32 max_sectors_1;
u32 max_sectors_2, tmp_sectors, msix_enable;
u32 scratch_pad_2, scratch_pad_3, scratch_pad_4;
resource_size_t base_addr;
struct megasas_register_set __iomem *reg_set;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
struct megasas_ctrl_info *ctrl_info = NULL;
unsigned long bar_list;
int i, j, loop, fw_msix_count = 0;
struct IOV_111 *iovPtr;
struct fusion_context *fusion;
fusion = instance->ctrl_context;
/* Find first memory bar */
bar_list = pci_select_bars(instance->pdev, IORESOURCE_MEM);
instance->bar = find_first_bit(&bar_list, BITS_PER_LONG);
if (pci_request_selected_regions(instance->pdev, 1<<instance->bar,
"megasas: LSI")) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "IO memory region busy!\n");
return -EBUSY;
}
base_addr = pci_resource_start(instance->pdev, instance->bar);
instance->reg_set = ioremap_nocache(base_addr, 8192);
if (!instance->reg_set) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to map IO mem\n");
goto fail_ioremap;
}
reg_set = instance->reg_set;
if (fusion)
instance->instancet = &megasas_instance_template_fusion;
else {
switch (instance->pdev->device) {
case PCI_DEVICE_ID_LSI_SAS1078R:
case PCI_DEVICE_ID_LSI_SAS1078DE:
instance->instancet = &megasas_instance_template_ppc;
break;
case PCI_DEVICE_ID_LSI_SAS1078GEN2:
case PCI_DEVICE_ID_LSI_SAS0079GEN2:
instance->instancet = &megasas_instance_template_gen2;
break;
case PCI_DEVICE_ID_LSI_SAS0073SKINNY:
case PCI_DEVICE_ID_LSI_SAS0071SKINNY:
instance->instancet = &megasas_instance_template_skinny;
break;
case PCI_DEVICE_ID_LSI_SAS1064R:
case PCI_DEVICE_ID_DELL_PERC5:
default:
instance->instancet = &megasas_instance_template_xscale;
instance->pd_list_not_supported = 1;
break;
}
}
if (megasas_transition_to_ready(instance, 0)) {
atomic_set(&instance->fw_reset_no_pci_access, 1);
instance->instancet->adp_reset
(instance, instance->reg_set);
atomic_set(&instance->fw_reset_no_pci_access, 0);
dev_info(&instance->pdev->dev,
"FW restarted successfully from %s!\n",
__func__);
/*waitting for about 30 second before retry*/
ssleep(30);
if (megasas_transition_to_ready(instance, 0))
goto fail_ready_state;
}
if (instance->is_ventura) {
scratch_pad_3 =
readl(&instance->reg_set->outbound_scratch_pad_3);
instance->max_raid_mapsize = ((scratch_pad_3 >>
MR_MAX_RAID_MAP_SIZE_OFFSET_SHIFT) &
MR_MAX_RAID_MAP_SIZE_MASK);
}
/* Check if MSI-X is supported while in ready state */
msix_enable = (instance->instancet->read_fw_status_reg(reg_set) &
0x4000000) >> 0x1a;
if (msix_enable && !msix_disable) {
int irq_flags = PCI_IRQ_MSIX;
scratch_pad_2 = readl
(&instance->reg_set->outbound_scratch_pad_2);
/* Check max MSI-X vectors */
if (fusion) {
if (fusion->adapter_type == THUNDERBOLT_SERIES) { /* Thunderbolt Series*/
instance->msix_vectors = (scratch_pad_2
& MR_MAX_REPLY_QUEUES_OFFSET) + 1;
fw_msix_count = instance->msix_vectors;
} else { /* Invader series supports more than 8 MSI-x vectors*/
instance->msix_vectors = ((scratch_pad_2
& MR_MAX_REPLY_QUEUES_EXT_OFFSET)
>> MR_MAX_REPLY_QUEUES_EXT_OFFSET_SHIFT) + 1;
if (instance->msix_vectors > 16)
instance->msix_combined = true;
if (rdpq_enable)
instance->is_rdpq = (scratch_pad_2 & MR_RDPQ_MODE_OFFSET) ?
1 : 0;
fw_msix_count = instance->msix_vectors;
/* Save 1-15 reply post index address to local memory
* Index 0 is already saved from reg offset
* MPI2_REPLY_POST_HOST_INDEX_OFFSET
*/
for (loop = 1; loop < MR_MAX_MSIX_REG_ARRAY; loop++) {
instance->reply_post_host_index_addr[loop] =
(u32 __iomem *)
((u8 __iomem *)instance->reg_set +
MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET
+ (loop * 0x10));
}
}
if (msix_vectors)
instance->msix_vectors = min(msix_vectors,
instance->msix_vectors);
} else /* MFI adapters */
instance->msix_vectors = 1;
/* Don't bother allocating more MSI-X vectors than cpus */
instance->msix_vectors = min(instance->msix_vectors,
(unsigned int)num_online_cpus());
if (smp_affinity_enable)
irq_flags |= PCI_IRQ_AFFINITY;
i = pci_alloc_irq_vectors(instance->pdev, 1,
instance->msix_vectors, irq_flags);
if (i > 0)
instance->msix_vectors = i;
else
instance->msix_vectors = 0;
}
/*
* MSI-X host index 0 is common for all adapter.
* It is used for all MPT based Adapters.
*/
if (instance->msix_combined) {
instance->reply_post_host_index_addr[0] =
(u32 *)((u8 *)instance->reg_set +
MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET);
} else {
instance->reply_post_host_index_addr[0] =
(u32 *)((u8 *)instance->reg_set +
MPI2_REPLY_POST_HOST_INDEX_OFFSET);
}
if (!instance->msix_vectors) {
i = pci_alloc_irq_vectors(instance->pdev, 1, 1, PCI_IRQ_LEGACY);
if (i < 0)
goto fail_setup_irqs;
}
dev_info(&instance->pdev->dev,
"firmware supports msix\t: (%d)", fw_msix_count);
dev_info(&instance->pdev->dev,
"current msix/online cpus\t: (%d/%d)\n",
instance->msix_vectors, (unsigned int)num_online_cpus());
dev_info(&instance->pdev->dev,
"RDPQ mode\t: (%s)\n", instance->is_rdpq ? "enabled" : "disabled");
tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
(unsigned long)instance);
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
instance->ctrl_info = kzalloc(sizeof(struct megasas_ctrl_info),
GFP_KERNEL);
if (instance->ctrl_info == NULL)
goto fail_init_adapter;
/*
* Below are default value for legacy Firmware.
* non-fusion based controllers
*/
instance->fw_supported_vd_count = MAX_LOGICAL_DRIVES;
instance->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
/* Get operational params, sge flags, send init cmd to controller */
if (instance->instancet->init_adapter(instance))
goto fail_init_adapter;
if (instance->is_ventura) {
scratch_pad_4 =
readl(&instance->reg_set->outbound_scratch_pad_4);
if ((scratch_pad_4 & MR_NVME_PAGE_SIZE_MASK) >=
MR_DEFAULT_NVME_PAGE_SHIFT)
instance->nvme_page_size =
(1 << (scratch_pad_4 & MR_NVME_PAGE_SIZE_MASK));
dev_info(&instance->pdev->dev,
"NVME page size\t: (%d)\n", instance->nvme_page_size);
}
if (instance->msix_vectors ?
megasas_setup_irqs_msix(instance, 1) :
megasas_setup_irqs_ioapic(instance))
goto fail_init_adapter;
instance->instancet->enable_intr(instance);
dev_info(&instance->pdev->dev, "INIT adapter done\n");
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
megasas_setup_jbod_map(instance);
/** for passthrough
* the following function will get the PD LIST.
*/
memset(instance->pd_list, 0,
(MEGASAS_MAX_PD * sizeof(struct megasas_pd_list)));
if (megasas_get_pd_list(instance) < 0) {
dev_err(&instance->pdev->dev, "failed to get PD list\n");
goto fail_get_ld_pd_list;
}
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
/* stream detection initialization */
if (instance->is_ventura && fusion) {
fusion->stream_detect_by_ld =
kzalloc(sizeof(struct LD_STREAM_DETECT *)
* MAX_LOGICAL_DRIVES_EXT,
GFP_KERNEL);
if (!fusion->stream_detect_by_ld) {
dev_err(&instance->pdev->dev,
"unable to allocate stream detection for pool of LDs\n");
goto fail_get_ld_pd_list;
}
for (i = 0; i < MAX_LOGICAL_DRIVES_EXT; ++i) {
fusion->stream_detect_by_ld[i] =
kmalloc(sizeof(struct LD_STREAM_DETECT),
GFP_KERNEL);
if (!fusion->stream_detect_by_ld[i]) {
dev_err(&instance->pdev->dev,
"unable to allocate stream detect by LD\n ");
for (j = 0; j < i; ++j)
kfree(fusion->stream_detect_by_ld[j]);
kfree(fusion->stream_detect_by_ld);
fusion->stream_detect_by_ld = NULL;
goto fail_get_ld_pd_list;
}
fusion->stream_detect_by_ld[i]->mru_bit_map
= MR_STREAM_BITMAP;
}
}
if (megasas_ld_list_query(instance,
MR_LD_QUERY_TYPE_EXPOSED_TO_HOST))
goto fail_get_ld_pd_list;
/*
* Compute the max allowed sectors per IO: The controller info has two
* limits on max sectors. Driver should use the minimum of these two.
*
* 1 << stripe_sz_ops.min = max sectors per strip
*
* Note that older firmwares ( < FW ver 30) didn't report information
* to calculate max_sectors_1. So the number ended up as zero always.
*/
tmp_sectors = 0;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
ctrl_info = instance->ctrl_info;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) *
le16_to_cpu(ctrl_info->max_strips_per_io);
max_sectors_2 = le32_to_cpu(ctrl_info->max_request_size);
tmp_sectors = min_t(u32, max_sectors_1, max_sectors_2);
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
instance->peerIsPresent = ctrl_info->cluster.peerIsPresent;
instance->passive = ctrl_info->cluster.passive;
memcpy(instance->clusterId, ctrl_info->clusterId, sizeof(instance->clusterId));
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
instance->UnevenSpanSupport =
ctrl_info->adapterOperations2.supportUnevenSpans;
if (instance->UnevenSpanSupport) {
struct fusion_context *fusion = instance->ctrl_context;
if (MR_ValidateMapInfo(instance))
fusion->fast_path_io = 1;
else
fusion->fast_path_io = 0;
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
}
if (ctrl_info->host_interface.SRIOV) {
instance->requestorId = ctrl_info->iov.requestorId;
if (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) {
if (!ctrl_info->adapterOperations2.activePassive)
instance->PlasmaFW111 = 1;
dev_info(&instance->pdev->dev, "SR-IOV: firmware type: %s\n",
instance->PlasmaFW111 ? "1.11" : "new");
if (instance->PlasmaFW111) {
iovPtr = (struct IOV_111 *)
((unsigned char *)ctrl_info + IOV_111_OFFSET);
instance->requestorId = iovPtr->requestorId;
}
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
}
dev_info(&instance->pdev->dev, "SRIOV: VF requestorId %d\n",
instance->requestorId);
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
}
instance->crash_dump_fw_support =
ctrl_info->adapterOperations3.supportCrashDump;
instance->crash_dump_drv_support =
(instance->crash_dump_fw_support &&
instance->crash_dump_buf);
if (instance->crash_dump_drv_support)
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
megasas_set_crash_dump_params(instance,
MR_CRASH_BUF_TURN_OFF);
else {
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
if (instance->crash_dump_buf)
pci_free_consistent(instance->pdev,
CRASH_DMA_BUF_SIZE,
instance->crash_dump_buf,
instance->crash_dump_h);
instance->crash_dump_buf = NULL;
}
dev_info(&instance->pdev->dev,
"pci id\t\t: (0x%04x)/(0x%04x)/(0x%04x)/(0x%04x)\n",
le16_to_cpu(ctrl_info->pci.vendor_id),
le16_to_cpu(ctrl_info->pci.device_id),
le16_to_cpu(ctrl_info->pci.sub_vendor_id),
le16_to_cpu(ctrl_info->pci.sub_device_id));
dev_info(&instance->pdev->dev, "unevenspan support : %s\n",
instance->UnevenSpanSupport ? "yes" : "no");
dev_info(&instance->pdev->dev, "firmware crash dump : %s\n",
instance->crash_dump_drv_support ? "yes" : "no");
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
dev_info(&instance->pdev->dev, "jbod sync map : %s\n",
instance->use_seqnum_jbod_fp ? "yes" : "no");
instance->max_sectors_per_req = instance->max_num_sge *
SGE_BUFFER_SIZE / 512;
if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors))
instance->max_sectors_per_req = tmp_sectors;
/* Check for valid throttlequeuedepth module parameter */
if (throttlequeuedepth &&
throttlequeuedepth <= instance->max_scsi_cmds)
instance->throttlequeuedepth = throttlequeuedepth;
else
instance->throttlequeuedepth =
MEGASAS_THROTTLE_QUEUE_DEPTH;
if (resetwaittime > MEGASAS_RESET_WAIT_TIME)
resetwaittime = MEGASAS_RESET_WAIT_TIME;
if ((scmd_timeout < 10) || (scmd_timeout > MEGASAS_DEFAULT_CMD_TIMEOUT))
scmd_timeout = MEGASAS_DEFAULT_CMD_TIMEOUT;
/* Launch SR-IOV heartbeat timer */
if (instance->requestorId) {
if (!megasas_sriov_start_heartbeat(instance, 1))
megasas_start_timer(instance,
&instance->sriov_heartbeat_timer,
megasas_sriov_heartbeat_handler,
MEGASAS_SRIOV_HEARTBEAT_INTERVAL_VF);
else
instance->skip_heartbeat_timer_del = 1;
}
return 0;
fail_get_ld_pd_list:
instance->instancet->disable_intr(instance);
fail_init_adapter:
megasas_destroy_irqs(instance);
fail_setup_irqs:
if (instance->msix_vectors)
pci_free_irq_vectors(instance->pdev);
instance->msix_vectors = 0;
fail_ready_state:
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
kfree(instance->ctrl_info);
instance->ctrl_info = NULL;
iounmap(instance->reg_set);
fail_ioremap:
pci_release_selected_regions(instance->pdev, 1<<instance->bar);
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
__func__, __LINE__);
return -EINVAL;
}
/**
* megasas_release_mfi - Reverses the FW initialization
* @instance: Adapter soft state
*/
static void megasas_release_mfi(struct megasas_instance *instance)
{
u32 reply_q_sz = sizeof(u32) *(instance->max_mfi_cmds + 1);
if (instance->reply_queue)
pci_free_consistent(instance->pdev, reply_q_sz,
instance->reply_queue, instance->reply_queue_h);
megasas_free_cmds(instance);
iounmap(instance->reg_set);
pci_release_selected_regions(instance->pdev, 1<<instance->bar);
}
/**
* megasas_get_seq_num - Gets latest event sequence numbers
* @instance: Adapter soft state
* @eli: FW event log sequence numbers information
*
* FW maintains a log of all events in a non-volatile area. Upper layers would
* usually find out the latest sequence number of the events, the seq number at
* the boot etc. They would "read" all the events below the latest seq number
* by issuing a direct fw cmd (DCMD). For the future events (beyond latest seq
* number), they would subsribe to AEN (asynchronous event notification) and
* wait for the events to happen.
*/
static int
megasas_get_seq_num(struct megasas_instance *instance,
struct megasas_evt_log_info *eli)
{
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
struct megasas_evt_log_info *el_info;
dma_addr_t el_info_h = 0;
cmd = megasas_get_cmd(instance);
if (!cmd) {
return -ENOMEM;
}
dcmd = &cmd->frame->dcmd;
el_info = pci_alloc_consistent(instance->pdev,
sizeof(struct megasas_evt_log_info),
&el_info_h);
if (!el_info) {
megasas_return_cmd(instance, cmd);
return -ENOMEM;
}
memset(el_info, 0, sizeof(*el_info));
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0x0;
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct megasas_evt_log_info));
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_EVENT_GET_INFO);
dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(el_info_h);
dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct megasas_evt_log_info));
if (megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS) ==
DCMD_SUCCESS) {
/*
* Copy the data back into callers buffer
*/
eli->newest_seq_num = el_info->newest_seq_num;
eli->oldest_seq_num = el_info->oldest_seq_num;
eli->clear_seq_num = el_info->clear_seq_num;
eli->shutdown_seq_num = el_info->shutdown_seq_num;
eli->boot_seq_num = el_info->boot_seq_num;
} else
dev_err(&instance->pdev->dev, "DCMD failed "
"from %s\n", __func__);
pci_free_consistent(instance->pdev, sizeof(struct megasas_evt_log_info),
el_info, el_info_h);
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(instance, cmd);
return 0;
}
/**
* megasas_register_aen - Registers for asynchronous event notification
* @instance: Adapter soft state
* @seq_num: The starting sequence number
* @class_locale: Class of the event
*
* This function subscribes for AEN for events beyond the @seq_num. It requests
* to be notified if and only if the event is of type @class_locale
*/
static int
megasas_register_aen(struct megasas_instance *instance, u32 seq_num,
u32 class_locale_word)
{
int ret_val;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
union megasas_evt_class_locale curr_aen;
union megasas_evt_class_locale prev_aen;
/*
* If there an AEN pending already (aen_cmd), check if the
* class_locale of that pending AEN is inclusive of the new
* AEN request we currently have. If it is, then we don't have
* to do anything. In other words, whichever events the current
* AEN request is subscribing to, have already been subscribed
* to.
*
* If the old_cmd is _not_ inclusive, then we have to abort
* that command, form a class_locale that is superset of both
* old and current and re-issue to the FW
*/
curr_aen.word = class_locale_word;
if (instance->aen_cmd) {
prev_aen.word =
le32_to_cpu(instance->aen_cmd->frame->dcmd.mbox.w[1]);
/*
* A class whose enum value is smaller is inclusive of all
* higher values. If a PROGRESS (= -1) was previously
* registered, then a new registration requests for higher
* classes need not be sent to FW. They are automatically
* included.
*
* Locale numbers don't have such hierarchy. They are bitmap
* values
*/
if ((prev_aen.members.class <= curr_aen.members.class) &&
!((prev_aen.members.locale & curr_aen.members.locale) ^
curr_aen.members.locale)) {
/*
* Previously issued event registration includes
* current request. Nothing to do.
*/
return 0;
} else {
curr_aen.members.locale |= prev_aen.members.locale;
if (prev_aen.members.class < curr_aen.members.class)
curr_aen.members.class = prev_aen.members.class;
instance->aen_cmd->abort_aen = 1;
ret_val = megasas_issue_blocked_abort_cmd(instance,
instance->
aen_cmd, 30);
if (ret_val) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to abort "
"previous AEN command\n");
return ret_val;
}
}
}
cmd = megasas_get_cmd(instance);
if (!cmd)
return -ENOMEM;
dcmd = &cmd->frame->dcmd;
memset(instance->evt_detail, 0, sizeof(struct megasas_evt_detail));
/*
* Prepare DCMD for aen registration
*/
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0x0;
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct megasas_evt_detail));
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_EVENT_WAIT);
dcmd->mbox.w[0] = cpu_to_le32(seq_num);
instance->last_seq_num = seq_num;
dcmd->mbox.w[1] = cpu_to_le32(curr_aen.word);
dcmd->sgl.sge32[0].phys_addr = cpu_to_le32(instance->evt_detail_h);
dcmd->sgl.sge32[0].length = cpu_to_le32(sizeof(struct megasas_evt_detail));
if (instance->aen_cmd != NULL) {
megasas_return_cmd(instance, cmd);
return 0;
}
/*
* Store reference to the cmd used to register for AEN. When an
* application wants us to register for AEN, we have to abort this
* cmd and re-register with a new EVENT LOCALE supplied by that app
*/
instance->aen_cmd = cmd;
/*
* Issue the aen registration frame
*/
instance->instancet->issue_dcmd(instance, cmd);
return 0;
}
/* megasas_get_target_prop - Send DCMD with below details to firmware.
*
* This DCMD will fetch few properties of LD/system PD defined
* in MR_TARGET_DEV_PROPERTIES. eg. Queue Depth, MDTS value.
*
* DCMD send by drivers whenever new target is added to the OS.
*
* dcmd.opcode - MR_DCMD_DEV_GET_TARGET_PROP
* dcmd.mbox.b[0] - DCMD is to be fired for LD or system PD.
* 0 = system PD, 1 = LD.
* dcmd.mbox.s[1] - TargetID for LD/system PD.
* dcmd.sge IN - Pointer to return MR_TARGET_DEV_PROPERTIES.
*
* @instance: Adapter soft state
* @sdev: OS provided scsi device
*
* Returns 0 on success non-zero on failure.
*/
static int
megasas_get_target_prop(struct megasas_instance *instance,
struct scsi_device *sdev)
{
int ret;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
u16 targetId = (sdev->channel % 2) + sdev->id;
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_err(&instance->pdev->dev,
"Failed to get cmd %s\n", __func__);
return -ENOMEM;
}
dcmd = &cmd->frame->dcmd;
memset(instance->tgt_prop, 0, sizeof(*instance->tgt_prop));
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->mbox.b[0] = MEGASAS_IS_LOGICAL(sdev);
dcmd->mbox.s[1] = cpu_to_le16(targetId);
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0xFF;
dcmd->sge_count = 1;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_READ);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len =
cpu_to_le32(sizeof(struct MR_TARGET_PROPERTIES));
dcmd->opcode = cpu_to_le32(MR_DCMD_DRV_GET_TARGET_PROP);
dcmd->sgl.sge32[0].phys_addr =
cpu_to_le32(instance->tgt_prop_h);
dcmd->sgl.sge32[0].length =
cpu_to_le32(sizeof(struct MR_TARGET_PROPERTIES));
if (instance->ctrl_context && !instance->mask_interrupts)
ret = megasas_issue_blocked_cmd(instance,
cmd, MFI_IO_TIMEOUT_SECS);
else
ret = megasas_issue_polled(instance, cmd);
switch (ret) {
case DCMD_TIMEOUT:
switch (dcmd_timeout_ocr_possible(instance)) {
case INITIATE_OCR:
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
megasas_reset_fusion(instance->host,
MFI_IO_TIMEOUT_OCR);
break;
case KILL_ADAPTER:
megaraid_sas_kill_hba(instance);
break;
case IGNORE_TIMEOUT:
dev_info(&instance->pdev->dev,
"Ignore DCMD timeout: %s %d\n",
__func__, __LINE__);
break;
}
break;
default:
megasas_return_cmd(instance, cmd);
}
if (ret != DCMD_SUCCESS)
dev_err(&instance->pdev->dev,
"return from %s %d return value %d\n",
__func__, __LINE__, ret);
return ret;
}
/**
* megasas_start_aen - Subscribes to AEN during driver load time
* @instance: Adapter soft state
*/
static int megasas_start_aen(struct megasas_instance *instance)
{
struct megasas_evt_log_info eli;
union megasas_evt_class_locale class_locale;
/*
* Get the latest sequence number from FW
*/
memset(&eli, 0, sizeof(eli));
if (megasas_get_seq_num(instance, &eli))
return -1;
/*
* Register AEN with FW for latest sequence number plus 1
*/
class_locale.members.reserved = 0;
class_locale.members.locale = MR_EVT_LOCALE_ALL;
class_locale.members.class = MR_EVT_CLASS_DEBUG;
return megasas_register_aen(instance,
le32_to_cpu(eli.newest_seq_num) + 1,
class_locale.word);
}
/**
* megasas_io_attach - Attaches this driver to SCSI mid-layer
* @instance: Adapter soft state
*/
static int megasas_io_attach(struct megasas_instance *instance)
{
struct Scsi_Host *host = instance->host;
/*
* Export parameters required by SCSI mid-layer
*/
host->unique_id = instance->unique_id;
host->can_queue = instance->max_scsi_cmds;
host->this_id = instance->init_id;
host->sg_tablesize = instance->max_num_sge;
if (instance->fw_support_ieee)
instance->max_sectors_per_req = MEGASAS_MAX_SECTORS_IEEE;
/*
* Check if the module parameter value for max_sectors can be used
*/
if (max_sectors && max_sectors < instance->max_sectors_per_req)
instance->max_sectors_per_req = max_sectors;
else {
if (max_sectors) {
if (((instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0079GEN2)) &&
(max_sectors <= MEGASAS_MAX_SECTORS)) {
instance->max_sectors_per_req = max_sectors;
} else {
dev_info(&instance->pdev->dev, "max_sectors should be > 0"
"and <= %d (or < 1MB for GEN2 controller)\n",
instance->max_sectors_per_req);
}
}
}
host->max_sectors = instance->max_sectors_per_req;
host->cmd_per_lun = MEGASAS_DEFAULT_CMD_PER_LUN;
host->max_channel = MEGASAS_MAX_CHANNELS - 1;
host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL;
host->max_lun = MEGASAS_MAX_LUN;
host->max_cmd_len = 16;
/*
* Notify the mid-layer about the new controller
*/
if (scsi_add_host(host, &instance->pdev->dev)) {
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
dev_err(&instance->pdev->dev,
"Failed to add host from %s %d\n",
__func__, __LINE__);
return -ENODEV;
}
return 0;
}
static int
megasas_set_dma_mask(struct pci_dev *pdev)
{
/*
* All our controllers are capable of performing 64-bit DMA
*/
if (IS_DMA64) {
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
goto fail_set_dma_mask;
}
} else {
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
goto fail_set_dma_mask;
}
/*
* Ensure that all data structures are allocated in 32-bit
* memory.
*/
if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
/* Try 32bit DMA mask and 32 bit Consistent dma mask */
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
&& !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
dev_info(&pdev->dev, "set 32bit DMA mask"
"and 32 bit consistent mask\n");
else
goto fail_set_dma_mask;
}
return 0;
fail_set_dma_mask:
return 1;
}
/**
* megasas_probe_one - PCI hotplug entry point
* @pdev: PCI device structure
* @id: PCI ids of supported hotplugged adapter
*/
static int megasas_probe_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int rval, pos;
struct Scsi_Host *host;
struct megasas_instance *instance;
u16 control = 0;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
struct fusion_context *fusion = NULL;
/* Reset MSI-X in the kdump kernel */
if (reset_devices) {
pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
if (pos) {
pci_read_config_word(pdev, pos + PCI_MSIX_FLAGS,
&control);
if (control & PCI_MSIX_FLAGS_ENABLE) {
dev_info(&pdev->dev, "resetting MSI-X\n");
pci_write_config_word(pdev,
pos + PCI_MSIX_FLAGS,
control &
~PCI_MSIX_FLAGS_ENABLE);
}
}
}
/*
* PCI prepping: enable device set bus mastering and dma mask
*/
rval = pci_enable_device_mem(pdev);
if (rval) {
return rval;
}
pci_set_master(pdev);
if (megasas_set_dma_mask(pdev))
goto fail_set_dma_mask;
host = scsi_host_alloc(&megasas_template,
sizeof(struct megasas_instance));
if (!host) {
dev_printk(KERN_DEBUG, &pdev->dev, "scsi_host_alloc failed\n");
goto fail_alloc_instance;
}
instance = (struct megasas_instance *)host->hostdata;
memset(instance, 0, sizeof(*instance));
atomic_set(&instance->fw_reset_no_pci_access, 0);
instance->pdev = pdev;
switch (instance->pdev->device) {
case PCI_DEVICE_ID_LSI_VENTURA:
case PCI_DEVICE_ID_LSI_HARPOON:
case PCI_DEVICE_ID_LSI_TOMCAT:
case PCI_DEVICE_ID_LSI_VENTURA_4PORT:
case PCI_DEVICE_ID_LSI_CRUSADER_4PORT:
instance->is_ventura = true;
case PCI_DEVICE_ID_LSI_FUSION:
case PCI_DEVICE_ID_LSI_PLASMA:
case PCI_DEVICE_ID_LSI_INVADER:
case PCI_DEVICE_ID_LSI_FURY:
case PCI_DEVICE_ID_LSI_INTRUDER:
case PCI_DEVICE_ID_LSI_INTRUDER_24:
case PCI_DEVICE_ID_LSI_CUTLASS_52:
case PCI_DEVICE_ID_LSI_CUTLASS_53:
{
if (megasas_alloc_fusion_context(instance)) {
megasas_free_fusion_context(instance);
goto fail_alloc_dma_buf;
}
fusion = instance->ctrl_context;
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA))
fusion->adapter_type = THUNDERBOLT_SERIES;
else if (instance->is_ventura)
fusion->adapter_type = VENTURA_SERIES;
else
fusion->adapter_type = INVADER_SERIES;
}
break;
default: /* For all other supported controllers */
instance->producer =
pci_alloc_consistent(pdev, sizeof(u32),
&instance->producer_h);
instance->consumer =
pci_alloc_consistent(pdev, sizeof(u32),
&instance->consumer_h);
if (!instance->producer || !instance->consumer) {
dev_printk(KERN_DEBUG, &pdev->dev, "Failed to allocate "
"memory for producer, consumer\n");
goto fail_alloc_dma_buf;
}
*instance->producer = 0;
*instance->consumer = 0;
break;
}
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
/* Crash dump feature related initialisation*/
instance->drv_buf_index = 0;
instance->drv_buf_alloc = 0;
instance->crash_dump_fw_support = 0;
instance->crash_dump_app_support = 0;
instance->fw_crash_state = UNAVAILABLE;
spin_lock_init(&instance->crashdump_lock);
instance->crash_dump_buf = NULL;
megasas_poll_wait_aen = 0;
instance->flag_ieee = 0;
instance->ev = NULL;
instance->issuepend_done = 1;
atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL);
instance->is_imr = 0;
instance->evt_detail = pci_alloc_consistent(pdev,
sizeof(struct
megasas_evt_detail),
&instance->evt_detail_h);
if (!instance->evt_detail) {
dev_printk(KERN_DEBUG, &pdev->dev, "Failed to allocate memory for "
"event detail structure\n");
goto fail_alloc_dma_buf;
}
if (!reset_devices) {
instance->system_info_buf = pci_zalloc_consistent(pdev,
sizeof(struct MR_DRV_SYSTEM_INFO),
&instance->system_info_h);
if (!instance->system_info_buf)
dev_info(&instance->pdev->dev, "Can't allocate system info buffer\n");
instance->pd_info = pci_alloc_consistent(pdev,
sizeof(struct MR_PD_INFO), &instance->pd_info_h);
instance->pd_info = pci_alloc_consistent(pdev,
sizeof(struct MR_PD_INFO), &instance->pd_info_h);
instance->tgt_prop = pci_alloc_consistent(pdev,
sizeof(struct MR_TARGET_PROPERTIES), &instance->tgt_prop_h);
if (!instance->pd_info)
dev_err(&instance->pdev->dev, "Failed to alloc mem for pd_info\n");
if (!instance->tgt_prop)
dev_err(&instance->pdev->dev, "Failed to alloc mem for tgt_prop\n");
instance->crash_dump_buf = pci_alloc_consistent(pdev,
CRASH_DMA_BUF_SIZE,
&instance->crash_dump_h);
if (!instance->crash_dump_buf)
dev_err(&pdev->dev, "Can't allocate Firmware "
"crash dump DMA buffer\n");
}
/*
* Initialize locks and queues
*/
INIT_LIST_HEAD(&instance->cmd_pool);
INIT_LIST_HEAD(&instance->internal_reset_pending_q);
atomic_set(&instance->fw_outstanding,0);
init_waitqueue_head(&instance->int_cmd_wait_q);
init_waitqueue_head(&instance->abort_cmd_wait_q);
spin_lock_init(&instance->mfi_pool_lock);
spin_lock_init(&instance->hba_lock);
spin_lock_init(&instance->stream_lock);
spin_lock_init(&instance->completion_lock);
mutex_init(&instance->reset_mutex);
mutex_init(&instance->hba_mutex);
/*
* Initialize PCI related and misc parameters
*/
instance->host = host;
instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
instance->init_id = MEGASAS_DEFAULT_INIT_ID;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
instance->ctrl_info = NULL;
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY))
instance->flag_ieee = 1;
megasas_dbg_lvl = 0;
instance->flag = 0;
instance->unload = 1;
instance->last_time = 0;
instance->disableOnlineCtrlReset = 1;
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 15:05:04 +08:00
instance->UnevenSpanSupport = 0;
if (instance->ctrl_context) {
INIT_WORK(&instance->work_init, megasas_fusion_ocr_wq);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
INIT_WORK(&instance->crash_init, megasas_fusion_crash_dump_wq);
} else
INIT_WORK(&instance->work_init, process_fw_state_change_wq);
/*
* Initialize MFI Firmware
*/
if (megasas_init_fw(instance))
goto fail_init_mfi;
if (instance->requestorId) {
if (instance->PlasmaFW111) {
instance->vf_affiliation_111 =
pci_alloc_consistent(pdev, sizeof(struct MR_LD_VF_AFFILIATION_111),
&instance->vf_affiliation_111_h);
if (!instance->vf_affiliation_111)
dev_warn(&pdev->dev, "Can't allocate "
"memory for VF affiliation buffer\n");
} else {
instance->vf_affiliation =
pci_alloc_consistent(pdev,
(MAX_LOGICAL_DRIVES + 1) *
sizeof(struct MR_LD_VF_AFFILIATION),
&instance->vf_affiliation_h);
if (!instance->vf_affiliation)
dev_warn(&pdev->dev, "Can't allocate "
"memory for VF affiliation buffer\n");
}
}
/*
* Store instance in PCI softstate
*/
pci_set_drvdata(pdev, instance);
/*
* Add this controller to megasas_mgmt_info structure so that it
* can be exported to management applications
*/
megasas_mgmt_info.count++;
megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = instance;
megasas_mgmt_info.max_index++;
/*
* Register with SCSI mid-layer
*/
if (megasas_io_attach(instance))
goto fail_io_attach;
instance->unload = 0;
/*
* Trigger SCSI to scan our drives
*/
scsi_scan_host(host);
/*
* Initiate AEN (Asynchronous Event Notification)
*/
if (megasas_start_aen(instance)) {
dev_printk(KERN_DEBUG, &pdev->dev, "start aen failed\n");
goto fail_start_aen;
}
/* Get current SR-IOV LD/VF affiliation */
if (instance->requestorId)
megasas_get_ld_vf_affiliation(instance, 1);
return 0;
fail_start_aen:
fail_io_attach:
megasas_mgmt_info.count--;
megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = NULL;
megasas_mgmt_info.max_index--;
instance->instancet->disable_intr(instance);
megasas_destroy_irqs(instance);
if (instance->ctrl_context)
megasas_release_fusion(instance);
else
megasas_release_mfi(instance);
if (instance->msix_vectors)
pci_free_irq_vectors(instance->pdev);
fail_init_mfi:
fail_alloc_dma_buf:
if (instance->evt_detail)
pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
instance->evt_detail,
instance->evt_detail_h);
if (instance->pd_info)
pci_free_consistent(pdev, sizeof(struct MR_PD_INFO),
instance->pd_info,
instance->pd_info_h);
if (instance->tgt_prop)
pci_free_consistent(pdev, sizeof(struct MR_TARGET_PROPERTIES),
instance->tgt_prop,
instance->tgt_prop_h);
if (instance->producer)
pci_free_consistent(pdev, sizeof(u32), instance->producer,
instance->producer_h);
if (instance->consumer)
pci_free_consistent(pdev, sizeof(u32), instance->consumer,
instance->consumer_h);
scsi_host_put(host);
fail_alloc_instance:
fail_set_dma_mask:
pci_disable_device(pdev);
return -ENODEV;
}
/**
* megasas_flush_cache - Requests FW to flush all its caches
* @instance: Adapter soft state
*/
static void megasas_flush_cache(struct megasas_instance *instance)
{
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR)
return;
cmd = megasas_get_cmd(instance);
if (!cmd)
return;
dcmd = &cmd->frame->dcmd;
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0x0;
dcmd->sge_count = 0;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_NONE);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = 0;
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_CACHE_FLUSH);
dcmd->mbox.b[0] = MR_FLUSH_CTRL_CACHE | MR_FLUSH_DISK_CACHE;
if (megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS)
!= DCMD_SUCCESS) {
dev_err(&instance->pdev->dev,
"return from %s %d\n", __func__, __LINE__);
return;
}
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(instance, cmd);
}
/**
* megasas_shutdown_controller - Instructs FW to shutdown the controller
* @instance: Adapter soft state
* @opcode: Shutdown/Hibernate
*/
static void megasas_shutdown_controller(struct megasas_instance *instance,
u32 opcode)
{
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR)
return;
cmd = megasas_get_cmd(instance);
if (!cmd)
return;
if (instance->aen_cmd)
megasas_issue_blocked_abort_cmd(instance,
instance->aen_cmd, MFI_IO_TIMEOUT_SECS);
if (instance->map_update_cmd)
megasas_issue_blocked_abort_cmd(instance,
instance->map_update_cmd, MFI_IO_TIMEOUT_SECS);
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
if (instance->jbod_seq_cmd)
megasas_issue_blocked_abort_cmd(instance,
instance->jbod_seq_cmd, MFI_IO_TIMEOUT_SECS);
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
dcmd = &cmd->frame->dcmd;
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
dcmd->cmd = MFI_CMD_DCMD;
dcmd->cmd_status = 0x0;
dcmd->sge_count = 0;
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_NONE);
dcmd->timeout = 0;
dcmd->pad_0 = 0;
dcmd->data_xfer_len = 0;
dcmd->opcode = cpu_to_le32(opcode);
if (megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS)
!= DCMD_SUCCESS) {
dev_err(&instance->pdev->dev,
"return from %s %d\n", __func__, __LINE__);
return;
}
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(instance, cmd);
}
#ifdef CONFIG_PM
/**
* megasas_suspend - driver suspend entry point
* @pdev: PCI device structure
* @state: PCI power state to suspend routine
*/
static int
megasas_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct Scsi_Host *host;
struct megasas_instance *instance;
instance = pci_get_drvdata(pdev);
host = instance->host;
instance->unload = 1;
/* Shutdown SR-IOV heartbeat timer */
if (instance->requestorId && !instance->skip_heartbeat_timer_del)
del_timer_sync(&instance->sriov_heartbeat_timer);
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN);
/* cancel the delayed work if this work still in queue */
if (instance->ev != NULL) {
struct megasas_aen_event *ev = instance->ev;
cancel_delayed_work_sync(&ev->hotplug_work);
instance->ev = NULL;
}
tasklet_kill(&instance->isr_tasklet);
pci_set_drvdata(instance->pdev, instance);
instance->instancet->disable_intr(instance);
megasas_destroy_irqs(instance);
if (instance->msix_vectors)
pci_free_irq_vectors(instance->pdev);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
/**
* megasas_resume- driver resume entry point
* @pdev: PCI device structure
*/
static int
megasas_resume(struct pci_dev *pdev)
{
int rval;
struct Scsi_Host *host;
struct megasas_instance *instance;
int irq_flags = PCI_IRQ_LEGACY;
instance = pci_get_drvdata(pdev);
host = instance->host;
pci_set_power_state(pdev, PCI_D0);
pci_enable_wake(pdev, PCI_D0, 0);
pci_restore_state(pdev);
/*
* PCI prepping: enable device set bus mastering and dma mask
*/
rval = pci_enable_device_mem(pdev);
if (rval) {
dev_err(&pdev->dev, "Enable device failed\n");
return rval;
}
pci_set_master(pdev);
if (megasas_set_dma_mask(pdev))
goto fail_set_dma_mask;
/*
* Initialize MFI Firmware
*/
atomic_set(&instance->fw_outstanding, 0);
/*
* We expect the FW state to be READY
*/
if (megasas_transition_to_ready(instance, 0))
goto fail_ready_state;
/* Now re-enable MSI-X */
if (instance->msix_vectors) {
irq_flags = PCI_IRQ_MSIX;
if (smp_affinity_enable)
irq_flags |= PCI_IRQ_AFFINITY;
}
rval = pci_alloc_irq_vectors(instance->pdev, 1,
instance->msix_vectors ?
instance->msix_vectors : 1, irq_flags);
if (rval < 0)
goto fail_reenable_msix;
if (instance->ctrl_context) {
megasas_reset_reply_desc(instance);
if (megasas_ioc_init_fusion(instance)) {
megasas_free_cmds(instance);
megasas_free_cmds_fusion(instance);
goto fail_init_mfi;
}
if (!megasas_get_map_info(instance))
megasas_sync_map_info(instance);
} else {
*instance->producer = 0;
*instance->consumer = 0;
if (megasas_issue_init_mfi(instance))
goto fail_init_mfi;
}
tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
(unsigned long)instance);
if (instance->msix_vectors ?
megasas_setup_irqs_msix(instance, 0) :
megasas_setup_irqs_ioapic(instance))
goto fail_init_mfi;
/* Re-launch SR-IOV heartbeat timer */
if (instance->requestorId) {
if (!megasas_sriov_start_heartbeat(instance, 0))
megasas_start_timer(instance,
&instance->sriov_heartbeat_timer,
megasas_sriov_heartbeat_handler,
MEGASAS_SRIOV_HEARTBEAT_INTERVAL_VF);
else {
instance->skip_heartbeat_timer_del = 1;
goto fail_init_mfi;
}
}
instance->instancet->enable_intr(instance);
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
megasas_setup_jbod_map(instance);
instance->unload = 0;
/*
* Initiate AEN (Asynchronous Event Notification)
*/
if (megasas_start_aen(instance))
dev_err(&instance->pdev->dev, "Start AEN failed\n");
return 0;
fail_init_mfi:
if (instance->evt_detail)
pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
instance->evt_detail,
instance->evt_detail_h);
if (instance->pd_info)
pci_free_consistent(pdev, sizeof(struct MR_PD_INFO),
instance->pd_info,
instance->pd_info_h);
if (instance->tgt_prop)
pci_free_consistent(pdev, sizeof(struct MR_TARGET_PROPERTIES),
instance->tgt_prop,
instance->tgt_prop_h);
if (instance->producer)
pci_free_consistent(pdev, sizeof(u32), instance->producer,
instance->producer_h);
if (instance->consumer)
pci_free_consistent(pdev, sizeof(u32), instance->consumer,
instance->consumer_h);
scsi_host_put(host);
fail_set_dma_mask:
fail_ready_state:
fail_reenable_msix:
pci_disable_device(pdev);
return -ENODEV;
}
#else
#define megasas_suspend NULL
#define megasas_resume NULL
#endif
static inline int
megasas_wait_for_adapter_operational(struct megasas_instance *instance)
{
int wait_time = MEGASAS_RESET_WAIT_TIME * 2;
int i;
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR)
return 1;
for (i = 0; i < wait_time; i++) {
if (atomic_read(&instance->adprecovery) == MEGASAS_HBA_OPERATIONAL)
break;
if (!(i % MEGASAS_RESET_NOTICE_INTERVAL))
dev_notice(&instance->pdev->dev, "waiting for controller reset to finish\n");
msleep(1000);
}
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
dev_info(&instance->pdev->dev, "%s timed out while waiting for HBA to recover.\n",
__func__);
return 1;
}
return 0;
}
/**
* megasas_detach_one - PCI hot"un"plug entry point
* @pdev: PCI device structure
*/
static void megasas_detach_one(struct pci_dev *pdev)
{
int i;
struct Scsi_Host *host;
struct megasas_instance *instance;
struct fusion_context *fusion;
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
u32 pd_seq_map_sz;
instance = pci_get_drvdata(pdev);
instance->unload = 1;
host = instance->host;
fusion = instance->ctrl_context;
/* Shutdown SR-IOV heartbeat timer */
if (instance->requestorId && !instance->skip_heartbeat_timer_del)
del_timer_sync(&instance->sriov_heartbeat_timer);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
if (instance->fw_crash_state != UNAVAILABLE)
megasas_free_host_crash_buffer(instance);
scsi_remove_host(instance->host);
if (megasas_wait_for_adapter_operational(instance))
goto skip_firing_dcmds;
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
skip_firing_dcmds:
/* cancel the delayed work if this work still in queue*/
if (instance->ev != NULL) {
struct megasas_aen_event *ev = instance->ev;
cancel_delayed_work_sync(&ev->hotplug_work);
instance->ev = NULL;
}
/* cancel all wait events */
wake_up_all(&instance->int_cmd_wait_q);
tasklet_kill(&instance->isr_tasklet);
/*
* Take the instance off the instance array. Note that we will not
* decrement the max_index. We let this array be sparse array
*/
for (i = 0; i < megasas_mgmt_info.max_index; i++) {
if (megasas_mgmt_info.instance[i] == instance) {
megasas_mgmt_info.count--;
megasas_mgmt_info.instance[i] = NULL;
break;
}
}
instance->instancet->disable_intr(instance);
megasas_destroy_irqs(instance);
if (instance->msix_vectors)
pci_free_irq_vectors(instance->pdev);
if (instance->is_ventura) {
for (i = 0; i < MAX_LOGICAL_DRIVES_EXT; ++i)
kfree(fusion->stream_detect_by_ld[i]);
kfree(fusion->stream_detect_by_ld);
fusion->stream_detect_by_ld = NULL;
}
if (instance->ctrl_context) {
megasas_release_fusion(instance);
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 19:53:11 +08:00
pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
(sizeof(struct MR_PD_CFG_SEQ) *
(MAX_PHYSICAL_DEVICES - 1));
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
for (i = 0; i < 2 ; i++) {
if (fusion->ld_map[i])
dma_free_coherent(&instance->pdev->dev,
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
fusion->max_map_sz,
fusion->ld_map[i],
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
fusion->ld_map_phys[i]);
if (fusion->ld_drv_map[i])
free_pages((ulong)fusion->ld_drv_map[i],
fusion->drv_map_pages);
if (fusion->pd_seq_sync[i])
dma_free_coherent(&instance->pdev->dev,
pd_seq_map_sz,
fusion->pd_seq_sync[i],
fusion->pd_seq_phys[i]);
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
}
megasas_free_fusion_context(instance);
} else {
megasas_release_mfi(instance);
pci_free_consistent(pdev, sizeof(u32),
instance->producer,
instance->producer_h);
pci_free_consistent(pdev, sizeof(u32),
instance->consumer,
instance->consumer_h);
}
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
kfree(instance->ctrl_info);
if (instance->evt_detail)
pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
instance->evt_detail, instance->evt_detail_h);
if (instance->pd_info)
pci_free_consistent(pdev, sizeof(struct MR_PD_INFO),
instance->pd_info,
instance->pd_info_h);
if (instance->tgt_prop)
pci_free_consistent(pdev, sizeof(struct MR_TARGET_PROPERTIES),
instance->tgt_prop,
instance->tgt_prop_h);
if (instance->vf_affiliation)
pci_free_consistent(pdev, (MAX_LOGICAL_DRIVES + 1) *
sizeof(struct MR_LD_VF_AFFILIATION),
instance->vf_affiliation,
instance->vf_affiliation_h);
if (instance->vf_affiliation_111)
pci_free_consistent(pdev,
sizeof(struct MR_LD_VF_AFFILIATION_111),
instance->vf_affiliation_111,
instance->vf_affiliation_111_h);
if (instance->hb_host_mem)
pci_free_consistent(pdev, sizeof(struct MR_CTRL_HB_HOST_MEM),
instance->hb_host_mem,
instance->hb_host_mem_h);
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
if (instance->crash_dump_buf)
pci_free_consistent(pdev, CRASH_DMA_BUF_SIZE,
instance->crash_dump_buf, instance->crash_dump_h);
if (instance->system_info_buf)
pci_free_consistent(pdev, sizeof(struct MR_DRV_SYSTEM_INFO),
instance->system_info_buf, instance->system_info_h);
scsi_host_put(host);
pci_disable_device(pdev);
}
/**
* megasas_shutdown - Shutdown entry point
* @device: Generic device structure
*/
static void megasas_shutdown(struct pci_dev *pdev)
{
struct megasas_instance *instance = pci_get_drvdata(pdev);
instance->unload = 1;
if (megasas_wait_for_adapter_operational(instance))
goto skip_firing_dcmds;
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
skip_firing_dcmds:
instance->instancet->disable_intr(instance);
megasas_destroy_irqs(instance);
if (instance->msix_vectors)
pci_free_irq_vectors(instance->pdev);
}
/**
* megasas_mgmt_open - char node "open" entry point
*/
static int megasas_mgmt_open(struct inode *inode, struct file *filep)
{
/*
* Allow only those users with admin rights
*/
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
return 0;
}
/**
* megasas_mgmt_fasync - Async notifier registration from applications
*
* This function adds the calling process to a driver global queue. When an
* event occurs, SIGIO will be sent to all processes in this queue.
*/
static int megasas_mgmt_fasync(int fd, struct file *filep, int mode)
{
int rc;
mutex_lock(&megasas_async_queue_mutex);
rc = fasync_helper(fd, filep, mode, &megasas_async_queue);
mutex_unlock(&megasas_async_queue_mutex);
if (rc >= 0) {
/* For sanity check when we get ioctl */
filep->private_data = filep;
return 0;
}
printk(KERN_DEBUG "megasas: fasync_helper failed [%d]\n", rc);
return rc;
}
/**
* megasas_mgmt_poll - char node "poll" entry point
* */
static unsigned int megasas_mgmt_poll(struct file *file, poll_table *wait)
{
unsigned int mask;
unsigned long flags;
poll_wait(file, &megasas_poll_wait, wait);
spin_lock_irqsave(&poll_aen_lock, flags);
if (megasas_poll_wait_aen)
mask = (POLLIN | POLLRDNORM);
else
mask = 0;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:33 +08:00
megasas_poll_wait_aen = 0;
spin_unlock_irqrestore(&poll_aen_lock, flags);
return mask;
}
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
/*
* megasas_set_crash_dump_params_ioctl:
* Send CRASH_DUMP_MODE DCMD to all controllers
* @cmd: MFI command frame
*/
static int megasas_set_crash_dump_params_ioctl(struct megasas_cmd *cmd)
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
{
struct megasas_instance *local_instance;
int i, error = 0;
int crash_support;
crash_support = cmd->frame->dcmd.mbox.w[0];
for (i = 0; i < megasas_mgmt_info.max_index; i++) {
local_instance = megasas_mgmt_info.instance[i];
if (local_instance && local_instance->crash_dump_drv_support) {
if ((atomic_read(&local_instance->adprecovery) ==
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
MEGASAS_HBA_OPERATIONAL) &&
!megasas_set_crash_dump_params(local_instance,
crash_support)) {
local_instance->crash_dump_app_support =
crash_support;
dev_info(&local_instance->pdev->dev,
"Application firmware crash "
"dump mode set success\n");
error = 0;
} else {
dev_info(&local_instance->pdev->dev,
"Application firmware crash "
"dump mode set failed\n");
error = -1;
}
}
}
return error;
}
/**
* megasas_mgmt_fw_ioctl - Issues management ioctls to FW
* @instance: Adapter soft state
* @argp: User's ioctl packet
*/
static int
megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
struct megasas_iocpacket __user * user_ioc,
struct megasas_iocpacket *ioc)
{
struct megasas_sge32 *kern_sge32;
struct megasas_cmd *cmd;
void *kbuff_arr[MAX_IOCTL_SGE];
dma_addr_t buf_handle = 0;
int error = 0, i;
void *sense = NULL;
dma_addr_t sense_handle;
unsigned long *sense_ptr;
memset(kbuff_arr, 0, sizeof(kbuff_arr));
if (ioc->sge_count > MAX_IOCTL_SGE) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "SGE count [%d] > max limit [%d]\n",
ioc->sge_count, MAX_IOCTL_SGE);
return -EINVAL;
}
cmd = megasas_get_cmd(instance);
if (!cmd) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to get a cmd packet\n");
return -ENOMEM;
}
/*
* User's IOCTL packet has 2 frames (maximum). Copy those two
* frames into our cmd's frames. cmd->frame's context will get
* overwritten when we copy from user's frames. So set that value
* alone separately
*/
memcpy(cmd->frame, ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE);
cmd->frame->hdr.context = cpu_to_le32(cmd->index);
cmd->frame->hdr.pad_0 = 0;
cmd->frame->hdr.flags &= cpu_to_le16(~(MFI_FRAME_IEEE |
MFI_FRAME_SGL64 |
MFI_FRAME_SENSE64));
if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_SHUTDOWN) {
if (megasas_get_ctrl_info(instance) != DCMD_SUCCESS) {
megasas_return_cmd(instance, cmd);
return -1;
}
}
megaraid_sas : Firmware crash dump feature support Resending the patch. Addressed the review comments from Tomas Henzl. Move buff_offset inside spinlock, corrected loop at crash dump buffer free, reset_devices check is added to disable fw crash dump feature in kdump kernel. This feature will provide similar interface as kernel crash dump feature. When megaraid firmware encounter any crash, driver will collect the firmware raw image and dump it into pre-configured location. Driver will allocate two different segment of memory. #1 Non-DMA able large buffer (will be allocated on demand) to capture actual FW crash dump. #2 DMA buffer (persistence allocation) just to do a arbitrator job. Firmware will keep writing Crash dump data in chucks of DMA buffer size into #2, which will be copy back by driver to the host memory as described in #1. Driver-Firmware interface: ================== A.) Host driver can allocate maximum 512MB Host memory to store crash dump data. This memory will be internal to the host and will not be exposed to the Firmware. Driver may not be able to allocate 512 MB. In that case, driver will do possible memory (available at run time) allocation to store crash dump data. Let’s call this buffer as Host Crash Buffer. Host Crash buffer will not be contigious as a whole, but it will have multiple chunk of contigious memory. This will be internal to driver and firmware/application are unaware of it. Partial allocation of Host Crash buffer may have valid information to debug depending upon what was collected in that buffer and depending on nature of failure. Complete Crash dump is the best case, but we do want to capture partial buffer just to grab something rather than nothing. Host Crash buffer will be allocated only when FW Crash dump data is available, and will be deallocated once application copy Host Crash buffer to the file. Host Crash buffer size can be anything between 1MB to 512MB. (It will be multiple of 1MBs) B.) Irrespective of underlying Firmware capability of crash dump support, driver will allocate DMA buffer at start of the day for each MR controllers. Let’s call this buffer as “DMA Crash Buffer”. For this feature, size of DMA crash buffer will be 1MB. (We will not gain much even if DMA buffer size is increased.) C.) Driver will now read Controller Info sending existing dcmd “MR_DCMD_CTRL_GET_INFO”. Driver should extract the information from ctrl info provided by firmware and figure out if firmware support crash dump feature or not. Driver will enable crash dump feature only if “Firmware support Crash dump” + “Driver was able to create DMA Crash Buffer”. If either one from above is not set, Crash dump feature should be disable in driver. Firmware will enable crash dump feature only if “Driver Send DCMD- MR_DCMD_SET_CRASH_BUF_PARA with MR_CRASH_BUF_TURN_ON” Helper application/script should use sysfs parameter fw_crash_xxx to actually copy data from host memory to the filesystem. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 21:27:28 +08:00
if (cmd->frame->dcmd.opcode == MR_DRIVER_SET_APP_CRASHDUMP_MODE) {
error = megasas_set_crash_dump_params_ioctl(cmd);
megasas_return_cmd(instance, cmd);
return error;
}
/*
* The management interface between applications and the fw uses
* MFI frames. E.g, RAID configuration changes, LD property changes
* etc are accomplishes through different kinds of MFI frames. The
* driver needs to care only about substituting user buffers with
* kernel buffers in SGLs. The location of SGL is embedded in the
* struct iocpacket itself.
*/
kern_sge32 = (struct megasas_sge32 *)
((unsigned long)cmd->frame + ioc->sgl_off);
/*
* For each user buffer, create a mirror buffer and copy in
*/
for (i = 0; i < ioc->sge_count; i++) {
[SCSI] megaraid_sas: Sanity check user supplied length before passing it to dma_alloc_coherent() The ioc->sgl[i].iov_len value is supplied by the ioctl caller, and can be zero in some cases. Assume that's valid and continue without error. Fixes (multiple individual reports of the same problem for quite a while): http://marc.info/?l=linux-ide&m=128941801715301 http://bugs.debian.org/604627 http://www.mail-archive.com/linux-poweredge@dell.com/msg02575.html megasas: Failed to alloc kernel SGL buffer for IOCTL and [ 69.162538] ------------[ cut here ]------------ [ 69.162806] kernel BUG at /build/buildd/linux-2.6.32/lib/swiotlb.c:368! [ 69.163134] invalid opcode: 0000 [#1] SMP [ 69.163570] last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map [ 69.163975] CPU 0 [ 69.164227] Modules linked in: fbcon tileblit font bitblit softcursor vga16fb vgastate ioatdma radeon ttm drm_kms_helper shpchp drm i2c_algo_bit lp parport floppy pata_jmicron megaraid_sas igb dca [ 69.167419] Pid: 1206, comm: smartctl Tainted: G W 2.6.32-25-server #45-Ubuntu X8DTN [ 69.167843] RIP: 0010:[<ffffffff812c4dc5>] [<ffffffff812c4dc5>] map_single+0x255/0x260 [ 69.168370] RSP: 0018:ffff88081c0ebc58 EFLAGS: 00010246 [ 69.168655] RAX: 000000000003bffc RBX: 00000000ffffffff RCX: 0000000000000002 [ 69.169000] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88001dffe000 [ 69.169346] RBP: ffff88081c0ebcb8 R08: 0000000000000000 R09: ffff880000030840 [ 69.169691] R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000000 [ 69.170036] R13: 00000000ffffffff R14: 0000000000000001 R15: 0000000000200000 [ 69.170382] FS: 00007fb8de189720(0000) GS:ffff88001de00000(0000) knlGS:0000000000000000 [ 69.170794] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 69.171094] CR2: 00007fb8dd59237c CR3: 000000081a790000 CR4: 00000000000006f0 [ 69.171439] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 69.171784] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 69.172130] Process smartctl (pid: 1206, threadinfo ffff88081c0ea000, task ffff88081a760000) [ 69.194513] Stack: [ 69.205788] 0000000000000034 00000002817e3390 0000000000000000 ffff88081c0ebe00 [ 69.217739] <0> 0000000000000000 000000000003bffc 0000000000000000 0000000000000000 [ 69.241250] <0> 0000000000000000 00000000ffffffff ffff88081c5b4080 ffff88081c0ebe00 [ 69.277310] Call Trace: [ 69.289278] [<ffffffff812c52ac>] swiotlb_alloc_coherent+0xec/0x130 [ 69.301118] [<ffffffff81038b31>] x86_swiotlb_alloc_coherent+0x61/0x70 [ 69.313045] [<ffffffffa002d0ce>] megasas_mgmt_fw_ioctl+0x1ae/0x690 [megaraid_sas] [ 69.336399] [<ffffffffa002d748>] megasas_mgmt_ioctl_fw+0x198/0x240 [megaraid_sas] [ 69.359346] [<ffffffffa002f695>] megasas_mgmt_ioctl+0x35/0x50 [megaraid_sas] [ 69.370902] [<ffffffff81153b12>] vfs_ioctl+0x22/0xa0 [ 69.382322] [<ffffffff8115da2a>] ? alloc_fd+0x10a/0x150 [ 69.393622] [<ffffffff81153cb1>] do_vfs_ioctl+0x81/0x410 [ 69.404696] [<ffffffff8155cc13>] ? do_page_fault+0x153/0x3b0 [ 69.415761] [<ffffffff811540c1>] sys_ioctl+0x81/0xa0 [ 69.426640] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b [ 69.437491] Code: fe ff ff 48 8b 3d 74 38 76 00 41 bf 00 00 20 00 e8 51 f5 d7 ff 83 e0 ff 48 05 ff 07 00 00 48 c1 e8 0b 48 89 45 c8 e9 13 fe ff ff <0f> 0b eb fe 0f 1f 80 00 00 00 00 55 48 89 e5 48 83 ec 20 4c 89 [ 69.478216] RIP [<ffffffff812c4dc5>] map_single+0x255/0x260 [ 69.489668] RSP <ffff88081c0ebc58> [ 69.500975] ---[ end trace 6a2181b634e2abc7 ]--- Reported-by: Bokhan Artem <aptem@ngs.ru> Reported by: Marc-Christian Petersen <m.c.p@gmx.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: "Benz, Michael" <Michael.Benz@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-19 17:01:14 +08:00
if (!ioc->sgl[i].iov_len)
continue;
kbuff_arr[i] = dma_alloc_coherent(&instance->pdev->dev,
ioc->sgl[i].iov_len,
&buf_handle, GFP_KERNEL);
if (!kbuff_arr[i]) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to alloc "
"kernel SGL buffer for IOCTL\n");
error = -ENOMEM;
goto out;
}
/*
* We don't change the dma_coherent_mask, so
* pci_alloc_consistent only returns 32bit addresses
*/
kern_sge32[i].phys_addr = cpu_to_le32(buf_handle);
kern_sge32[i].length = cpu_to_le32(ioc->sgl[i].iov_len);
/*
* We created a kernel buffer corresponding to the
* user buffer. Now copy in from the user buffer
*/
if (copy_from_user(kbuff_arr[i], ioc->sgl[i].iov_base,
(u32) (ioc->sgl[i].iov_len))) {
error = -EFAULT;
goto out;
}
}
if (ioc->sense_len) {
sense = dma_alloc_coherent(&instance->pdev->dev, ioc->sense_len,
&sense_handle, GFP_KERNEL);
if (!sense) {
error = -ENOMEM;
goto out;
}
sense_ptr =
(unsigned long *) ((unsigned long)cmd->frame + ioc->sense_off);
*sense_ptr = cpu_to_le32(sense_handle);
}
/*
* Set the sync_cmd flag so that the ISR knows not to complete this
* cmd to the SCSI mid-layer
*/
cmd->sync_cmd = 1;
if (megasas_issue_blocked_cmd(instance, cmd, 0) == DCMD_NOT_FIRED) {
cmd->sync_cmd = 0;
dev_err(&instance->pdev->dev,
"return -EBUSY from %s %d opcode 0x%x cmd->cmd_status_drv 0x%x\n",
__func__, __LINE__, cmd->frame->dcmd.opcode,
cmd->cmd_status_drv);
return -EBUSY;
}
cmd->sync_cmd = 0;
if (instance->unload == 1) {
dev_info(&instance->pdev->dev, "Driver unload is in progress "
"don't submit data to application\n");
goto out;
}
/*
* copy out the kernel buffers to user buffers
*/
for (i = 0; i < ioc->sge_count; i++) {
if (copy_to_user(ioc->sgl[i].iov_base, kbuff_arr[i],
ioc->sgl[i].iov_len)) {
error = -EFAULT;
goto out;
}
}
/*
* copy out the sense
*/
if (ioc->sense_len) {
/*
* sense_ptr points to the location that has the user
* sense buffer address
*/
sense_ptr = (unsigned long *) ((unsigned long)ioc->frame.raw +
ioc->sense_off);
if (copy_to_user((void __user *)((unsigned long)
get_unaligned((unsigned long *)sense_ptr)),
sense, ioc->sense_len)) {
dev_err(&instance->pdev->dev, "Failed to copy out to user "
"sense data\n");
error = -EFAULT;
goto out;
}
}
/*
* copy the status codes returned by the fw
*/
if (copy_to_user(&user_ioc->frame.hdr.cmd_status,
&cmd->frame->hdr.cmd_status, sizeof(u8))) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Error copying out cmd_status\n");
error = -EFAULT;
}
out:
if (sense) {
dma_free_coherent(&instance->pdev->dev, ioc->sense_len,
sense, sense_handle);
}
for (i = 0; i < ioc->sge_count; i++) {
if (kbuff_arr[i]) {
dma_free_coherent(&instance->pdev->dev,
le32_to_cpu(kern_sge32[i].length),
kbuff_arr[i],
le32_to_cpu(kern_sge32[i].phys_addr));
kbuff_arr[i] = NULL;
}
}
megaraid_sas : Use Block layer tag support for internal command indexing megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d9 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-23 19:01:24 +08:00
megasas_return_cmd(instance, cmd);
return error;
}
static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg)
{
struct megasas_iocpacket __user *user_ioc =
(struct megasas_iocpacket __user *)arg;
struct megasas_iocpacket *ioc;
struct megasas_instance *instance;
int error;
int i;
unsigned long flags;
u32 wait_time = MEGASAS_RESET_WAIT_TIME;
ioc = memdup_user(user_ioc, sizeof(*ioc));
if (IS_ERR(ioc))
return PTR_ERR(ioc);
instance = megasas_lookup_instance(ioc->host_no);
if (!instance) {
error = -ENODEV;
goto out_kfree_ioc;
}
/* Adjust ioctl wait time for VF mode */
if (instance->requestorId)
wait_time = MEGASAS_ROUTINE_WAIT_TIME_VF;
/* Block ioctls in VF mode */
if (instance->requestorId && !allow_vf_ioctls) {
error = -ENODEV;
goto out_kfree_ioc;
}
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
dev_err(&instance->pdev->dev, "Controller in crit error\n");
error = -ENODEV;
goto out_kfree_ioc;
}
if (instance->unload == 1) {
error = -ENODEV;
goto out_kfree_ioc;
}
if (down_interruptible(&instance->ioctl_sem)) {
error = -ERESTARTSYS;
goto out_kfree_ioc;
}
for (i = 0; i < wait_time; i++) {
spin_lock_irqsave(&instance->hba_lock, flags);
if (atomic_read(&instance->adprecovery) == MEGASAS_HBA_OPERATIONAL) {
spin_unlock_irqrestore(&instance->hba_lock, flags);
break;
}
spin_unlock_irqrestore(&instance->hba_lock, flags);
if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
dev_notice(&instance->pdev->dev, "waiting"
"for controller reset to finish\n");
}
msleep(1000);
}
spin_lock_irqsave(&instance->hba_lock, flags);
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
spin_unlock_irqrestore(&instance->hba_lock, flags);
dev_err(&instance->pdev->dev, "timed out while waiting for HBA to recover\n");
error = -ENODEV;
goto out_up;
}
spin_unlock_irqrestore(&instance->hba_lock, flags);
error = megasas_mgmt_fw_ioctl(instance, user_ioc, ioc);
out_up:
up(&instance->ioctl_sem);
out_kfree_ioc:
kfree(ioc);
return error;
}
static int megasas_mgmt_ioctl_aen(struct file *file, unsigned long arg)
{
struct megasas_instance *instance;
struct megasas_aen aen;
int error;
int i;
unsigned long flags;
u32 wait_time = MEGASAS_RESET_WAIT_TIME;
if (file->private_data != file) {
printk(KERN_DEBUG "megasas: fasync_helper was not "
"called first\n");
return -EINVAL;
}
if (copy_from_user(&aen, (void __user *)arg, sizeof(aen)))
return -EFAULT;
instance = megasas_lookup_instance(aen.host_no);
if (!instance)
return -ENODEV;
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
return -ENODEV;
}
if (instance->unload == 1) {
return -ENODEV;
}
for (i = 0; i < wait_time; i++) {
spin_lock_irqsave(&instance->hba_lock, flags);
if (atomic_read(&instance->adprecovery) == MEGASAS_HBA_OPERATIONAL) {
spin_unlock_irqrestore(&instance->hba_lock,
flags);
break;
}
spin_unlock_irqrestore(&instance->hba_lock, flags);
if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
dev_notice(&instance->pdev->dev, "waiting for"
"controller reset to finish\n");
}
msleep(1000);
}
spin_lock_irqsave(&instance->hba_lock, flags);
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
spin_unlock_irqrestore(&instance->hba_lock, flags);
dev_err(&instance->pdev->dev, "timed out while waiting for HBA to recover\n");
return -ENODEV;
}
spin_unlock_irqrestore(&instance->hba_lock, flags);
mutex_lock(&instance->reset_mutex);
error = megasas_register_aen(instance, aen.seq_num,
aen.class_locale_word);
mutex_unlock(&instance->reset_mutex);
return error;
}
/**
* megasas_mgmt_ioctl - char node ioctl entry point
*/
static long
megasas_mgmt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case MEGASAS_IOC_FIRMWARE:
return megasas_mgmt_ioctl_fw(file, arg);
case MEGASAS_IOC_GET_AEN:
return megasas_mgmt_ioctl_aen(file, arg);
}
return -ENOTTY;
}
#ifdef CONFIG_COMPAT
static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg)
{
struct compat_megasas_iocpacket __user *cioc =
(struct compat_megasas_iocpacket __user *)arg;
struct megasas_iocpacket __user *ioc =
compat_alloc_user_space(sizeof(struct megasas_iocpacket));
int i;
int error = 0;
compat_uptr_t ptr;
u32 local_sense_off;
u32 local_sense_len;
u32 user_sense_off;
if (clear_user(ioc, sizeof(*ioc)))
return -EFAULT;
if (copy_in_user(&ioc->host_no, &cioc->host_no, sizeof(u16)) ||
copy_in_user(&ioc->sgl_off, &cioc->sgl_off, sizeof(u32)) ||
copy_in_user(&ioc->sense_off, &cioc->sense_off, sizeof(u32)) ||
copy_in_user(&ioc->sense_len, &cioc->sense_len, sizeof(u32)) ||
copy_in_user(ioc->frame.raw, cioc->frame.raw, 128) ||
copy_in_user(&ioc->sge_count, &cioc->sge_count, sizeof(u32)))
return -EFAULT;
/*
* The sense_ptr is used in megasas_mgmt_fw_ioctl only when
* sense_len is not null, so prepare the 64bit value under
* the same condition.
*/
if (get_user(local_sense_off, &ioc->sense_off) ||
get_user(local_sense_len, &ioc->sense_len) ||
get_user(user_sense_off, &cioc->sense_off))
return -EFAULT;
if (local_sense_len) {
void __user **sense_ioc_ptr =
(void __user **)((u8 *)((unsigned long)&ioc->frame.raw) + local_sense_off);
compat_uptr_t *sense_cioc_ptr =
(compat_uptr_t *)(((unsigned long)&cioc->frame.raw) + user_sense_off);
if (get_user(ptr, sense_cioc_ptr) ||
put_user(compat_ptr(ptr), sense_ioc_ptr))
return -EFAULT;
}
for (i = 0; i < MAX_IOCTL_SGE; i++) {
if (get_user(ptr, &cioc->sgl[i].iov_base) ||
put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) ||
copy_in_user(&ioc->sgl[i].iov_len,
&cioc->sgl[i].iov_len, sizeof(compat_size_t)))
return -EFAULT;
}
error = megasas_mgmt_ioctl_fw(file, (unsigned long)ioc);
if (copy_in_user(&cioc->frame.hdr.cmd_status,
&ioc->frame.hdr.cmd_status, sizeof(u8))) {
printk(KERN_DEBUG "megasas: error copy_in_user cmd_status\n");
return -EFAULT;
}
return error;
}
static long
megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
switch (cmd) {
case MEGASAS_IOC_FIRMWARE32:
return megasas_mgmt_compat_ioctl_fw(file, arg);
case MEGASAS_IOC_GET_AEN:
return megasas_mgmt_ioctl_aen(file, arg);
}
return -ENOTTY;
}
#endif
/*
* File operations structure for management interface
*/
static const struct file_operations megasas_mgmt_fops = {
.owner = THIS_MODULE,
.open = megasas_mgmt_open,
.fasync = megasas_mgmt_fasync,
.unlocked_ioctl = megasas_mgmt_ioctl,
.poll = megasas_mgmt_poll,
#ifdef CONFIG_COMPAT
.compat_ioctl = megasas_mgmt_compat_ioctl,
#endif
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 00:52:59 +08:00
.llseek = noop_llseek,
};
/*
* PCI hotplug support registration structure
*/
static struct pci_driver megasas_pci_driver = {
.name = "megaraid_sas",
.id_table = megasas_pci_table,
.probe = megasas_probe_one,
.remove = megasas_detach_one,
.suspend = megasas_suspend,
.resume = megasas_resume,
.shutdown = megasas_shutdown,
};
/*
* Sysfs driver attributes
*/
static ssize_t megasas_sysfs_show_version(struct device_driver *dd, char *buf)
{
return snprintf(buf, strlen(MEGASAS_VERSION) + 2, "%s\n",
MEGASAS_VERSION);
}
static DRIVER_ATTR(version, S_IRUGO, megasas_sysfs_show_version, NULL);
static ssize_t
megasas_sysfs_show_release_date(struct device_driver *dd, char *buf)
{
return snprintf(buf, strlen(MEGASAS_RELDATE) + 2, "%s\n",
MEGASAS_RELDATE);
}
static DRIVER_ATTR(release_date, S_IRUGO, megasas_sysfs_show_release_date, NULL);
static ssize_t
megasas_sysfs_show_support_poll_for_event(struct device_driver *dd, char *buf)
{
return sprintf(buf, "%u\n", support_poll_for_event);
}
static DRIVER_ATTR(support_poll_for_event, S_IRUGO,
megasas_sysfs_show_support_poll_for_event, NULL);
static ssize_t
megasas_sysfs_show_support_device_change(struct device_driver *dd, char *buf)
{
return sprintf(buf, "%u\n", support_device_change);
}
static DRIVER_ATTR(support_device_change, S_IRUGO,
megasas_sysfs_show_support_device_change, NULL);
static ssize_t
megasas_sysfs_show_dbg_lvl(struct device_driver *dd, char *buf)
{
return sprintf(buf, "%u\n", megasas_dbg_lvl);
}
static ssize_t
megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t count)
{
int retval = count;
if (sscanf(buf, "%u", &megasas_dbg_lvl) < 1) {
printk(KERN_ERR "megasas: could not set dbg_lvl\n");
retval = -EINVAL;
}
return retval;
}
static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl,
megasas_sysfs_set_dbg_lvl);
static inline void megasas_remove_scsi_device(struct scsi_device *sdev)
{
sdev_printk(KERN_INFO, sdev, "SCSI device is removed\n");
scsi_remove_device(sdev);
scsi_device_put(sdev);
}
static void
megasas_aen_polling(struct work_struct *work)
{
struct megasas_aen_event *ev =
container_of(work, struct megasas_aen_event, hotplug_work.work);
struct megasas_instance *instance = ev->instance;
union megasas_evt_class_locale class_locale;
struct Scsi_Host *host;
struct scsi_device *sdev1;
u16 pd_index = 0;
u16 ld_index = 0;
int i, j, doscan = 0;
u32 seq_num, wait_time = MEGASAS_RESET_WAIT_TIME;
int error;
u8 dcmd_ret = DCMD_SUCCESS;
if (!instance) {
printk(KERN_ERR "invalid instance!\n");
kfree(ev);
return;
}
/* Adjust event workqueue thread wait time for VF mode */
if (instance->requestorId)
wait_time = MEGASAS_ROUTINE_WAIT_TIME_VF;
/* Don't run the event workqueue thread if OCR is running */
mutex_lock(&instance->reset_mutex);
instance->ev = NULL;
host = instance->host;
if (instance->evt_detail) {
megasas_decode_evt(instance);
switch (le32_to_cpu(instance->evt_detail->code)) {
case MR_EVT_PD_INSERTED:
case MR_EVT_PD_REMOVED:
dcmd_ret = megasas_get_pd_list(instance);
if (dcmd_ret == DCMD_SUCCESS)
doscan = SCAN_PD_CHANNEL;
break;
case MR_EVT_LD_OFFLINE:
case MR_EVT_CFG_CLEARED:
case MR_EVT_LD_DELETED:
case MR_EVT_LD_CREATED:
if (!instance->requestorId ||
(instance->requestorId && megasas_get_ld_vf_affiliation(instance, 0)))
dcmd_ret = megasas_ld_list_query(instance, MR_LD_QUERY_TYPE_EXPOSED_TO_HOST);
if (dcmd_ret == DCMD_SUCCESS)
doscan = SCAN_VD_CHANNEL;
break;
case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED:
case MR_EVT_FOREIGN_CFG_IMPORTED:
case MR_EVT_LD_STATE_CHANGE:
dcmd_ret = megasas_get_pd_list(instance);
if (dcmd_ret != DCMD_SUCCESS)
break;
if (!instance->requestorId ||
(instance->requestorId && megasas_get_ld_vf_affiliation(instance, 0)))
dcmd_ret = megasas_ld_list_query(instance, MR_LD_QUERY_TYPE_EXPOSED_TO_HOST);
if (dcmd_ret != DCMD_SUCCESS)
break;
doscan = SCAN_VD_CHANNEL | SCAN_PD_CHANNEL;
dev_info(&instance->pdev->dev, "scanning for scsi%d...\n",
instance->host->host_no);
break;
case MR_EVT_CTRL_PROP_CHANGED:
dcmd_ret = megasas_get_ctrl_info(instance);
break;
default:
doscan = 0;
break;
}
} else {
dev_err(&instance->pdev->dev, "invalid evt_detail!\n");
mutex_unlock(&instance->reset_mutex);
kfree(ev);
return;
}
mutex_unlock(&instance->reset_mutex);
if (doscan & SCAN_PD_CHANNEL) {
for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
pd_index = i*MEGASAS_MAX_DEV_PER_CHANNEL + j;
sdev1 = scsi_device_lookup(host, i, j, 0);
if (instance->pd_list[pd_index].driveState ==
MR_PD_STATE_SYSTEM) {
if (!sdev1)
scsi_add_device(host, i, j, 0);
else
scsi_device_put(sdev1);
} else {
if (sdev1)
megasas_remove_scsi_device(sdev1);
}
}
}
}
if (doscan & SCAN_VD_CHANNEL) {
for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
ld_index = (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
sdev1 = scsi_device_lookup(host, MEGASAS_MAX_PD_CHANNELS + i, j, 0);
if (instance->ld_ids[ld_index] != 0xff) {
if (!sdev1)
scsi_add_device(host, MEGASAS_MAX_PD_CHANNELS + i, j, 0);
else
scsi_device_put(sdev1);
} else {
if (sdev1)
megasas_remove_scsi_device(sdev1);
}
}
}
}
if (dcmd_ret == DCMD_SUCCESS)
seq_num = le32_to_cpu(instance->evt_detail->seq_num) + 1;
else
seq_num = instance->last_seq_num;
/* Register AEN with FW for latest sequence number plus 1 */
class_locale.members.reserved = 0;
class_locale.members.locale = MR_EVT_LOCALE_ALL;
class_locale.members.class = MR_EVT_CLASS_DEBUG;
if (instance->aen_cmd != NULL) {
kfree(ev);
return;
}
mutex_lock(&instance->reset_mutex);
error = megasas_register_aen(instance, seq_num,
class_locale.word);
if (error)
dev_err(&instance->pdev->dev,
"register aen failed error %x\n", error);
mutex_unlock(&instance->reset_mutex);
kfree(ev);
}
/**
* megasas_init - Driver load entry point
*/
static int __init megasas_init(void)
{
int rval;
/*
* Booted in kdump kernel, minimize memory footprints by
* disabling few features
*/
if (reset_devices) {
msix_vectors = 1;
rdpq_enable = 0;
dual_qdepth_disable = 1;
}
/*
* Announce driver version and other information
*/
pr_info("megasas: %s\n", MEGASAS_VERSION);
spin_lock_init(&poll_aen_lock);
support_poll_for_event = 2;
support_device_change = 1;
memset(&megasas_mgmt_info, 0, sizeof(megasas_mgmt_info));
/*
* Register character device node
*/
rval = register_chrdev(0, "megaraid_sas_ioctl", &megasas_mgmt_fops);
if (rval < 0) {
printk(KERN_DEBUG "megasas: failed to open device node\n");
return rval;
}
megasas_mgmt_majorno = rval;
/*
* Register ourselves as PCI hotplug module
*/
rval = pci_register_driver(&megasas_pci_driver);
if (rval) {
printk(KERN_DEBUG "megasas: PCI hotplug registration failed \n");
goto err_pcidrv;
}
rval = driver_create_file(&megasas_pci_driver.driver,
&driver_attr_version);
if (rval)
goto err_dcf_attr_ver;
rval = driver_create_file(&megasas_pci_driver.driver,
&driver_attr_release_date);
if (rval)
goto err_dcf_rel_date;
rval = driver_create_file(&megasas_pci_driver.driver,
&driver_attr_support_poll_for_event);
if (rval)
goto err_dcf_support_poll_for_event;
rval = driver_create_file(&megasas_pci_driver.driver,
&driver_attr_dbg_lvl);
if (rval)
goto err_dcf_dbg_lvl;
rval = driver_create_file(&megasas_pci_driver.driver,
&driver_attr_support_device_change);
if (rval)
goto err_dcf_support_device_change;
return rval;
err_dcf_support_device_change:
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_dbg_lvl);
err_dcf_dbg_lvl:
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_support_poll_for_event);
err_dcf_support_poll_for_event:
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_release_date);
err_dcf_rel_date:
driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
err_dcf_attr_ver:
pci_unregister_driver(&megasas_pci_driver);
err_pcidrv:
unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
return rval;
}
/**
* megasas_exit - Driver unload entry point
*/
static void __exit megasas_exit(void)
{
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_dbg_lvl);
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_support_poll_for_event);
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_support_device_change);
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_release_date);
driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
pci_unregister_driver(&megasas_pci_driver);
unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
}
module_init(megasas_init);
module_exit(megasas_exit);