linux/drivers/scsi/ufs/Makefile

# UFSHCD makefile
obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
[SCSI] ufshcd: UFS Host controller driver This patch adds support for Universal Flash Storage(UFS) host controllers. The UFS host controller driver includes host controller initialization method. The Initialization process involves following steps: - Initiate UFS Host Controller initialization process by writing to Host controller enable register - Configure UFS Host controller registers with host memory space datastructure offsets. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests - Enable required interrupts - Configure interrupt aggregation [jejb: fix warnings in 32 bit compile] Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Reviewed-by: Arnd Bergmann <arnd@linaro.org> Reviewed-by: Vishak G <vishak.g@samsung.com> Reviewed-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 2012-02-29 14:41:50 +08:00			`# UFSHCD makefile`
ufs: add TC G210 platform driver This patch adds a glue platform driver for the Synopsys G210 Test Chip. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 2016-05-11 19:21:32 +08:00			`obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o`
ufs-qcom: add support for Qualcomm Technologies Inc platforms This change adds support for Qualcomm Technologies Inc platforms that use UFS driver. for example, it adds : - PM specific operations during hibern8, suspend, resume, clock setup - qcom-ufs generic phy driver initialization, calibration, power-on/off sequence, etc. - UFS Controller specific configuration - Rate, Gear, Mode negotiation between device and controller Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Dov Levenglick <dovl@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de> 2015-01-15 22:32:37 +08:00			`obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o`
[SCSI] ufshcd: UFS Host controller driver This patch adds support for Universal Flash Storage(UFS) host controllers. The UFS host controller driver includes host controller initialization method. The Initialization process involves following steps: - Initiate UFS Host Controller initialization process by writing to Host controller enable register - Configure UFS Host controller registers with host memory space datastructure offsets. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests - Enable required interrupts - Configure interrupt aggregation [jejb: fix warnings in 32 bit compile] Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Reviewed-by: Arnd Bergmann <arnd@linaro.org> Reviewed-by: Vishak G <vishak.g@samsung.com> Reviewed-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 2012-02-29 14:41:50 +08:00			`obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o`
[SCSI] ufs: Separate PCI code into glue driver This patch separates PCI code from ufshcd.c and makes it as a core driver module and adds a new file ufshcd-pci.c as PCI glue driver. [jejb: strip __devinit and devexit_p()] Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Tested-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 2013-02-26 00:14:33 +08:00			`obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o`
[SCSI] ufs: Add Platform glue driver for ufshcd This patch adds Platform glue driver for ufshcd. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Tested-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 2013-02-26 20:34:45 +08:00			`obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o`