2015-07-29 22:22:47 +08:00
|
|
|
/*
|
|
|
|
* Atmel SDMMC controller driver.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2015 Atmel,
|
|
|
|
* 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
|
|
|
|
*
|
|
|
|
* This software is licensed under the terms of the GNU General Public
|
|
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
|
|
* may be copied, distributed, and modified under those terms.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/mmc/host.h>
|
2016-03-17 21:54:34 +08:00
|
|
|
#include <linux/mmc/slot-gpio.h>
|
2015-07-29 22:22:47 +08:00
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_device.h>
|
2015-11-12 02:11:48 +08:00
|
|
|
#include <linux/pm.h>
|
|
|
|
#include <linux/pm_runtime.h>
|
2015-07-29 22:22:47 +08:00
|
|
|
|
|
|
|
#include "sdhci-pltfm.h"
|
|
|
|
|
|
|
|
#define SDMMC_CACR 0x230
|
|
|
|
#define SDMMC_CACR_CAPWREN BIT(0)
|
|
|
|
#define SDMMC_CACR_KEY (0x46 << 8)
|
|
|
|
|
|
|
|
struct sdhci_at91_priv {
|
|
|
|
struct clk *hclock;
|
|
|
|
struct clk *gck;
|
|
|
|
struct clk *mainck;
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
|
|
|
|
.set_clock = sdhci_set_clock,
|
|
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
|
|
.reset = sdhci_reset,
|
|
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct sdhci_pltfm_data soc_data_sama5d2 = {
|
|
|
|
.ops = &sdhci_at91_sama5d2_ops,
|
2015-09-17 16:16:20 +08:00
|
|
|
.quirks2 = SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST,
|
2015-07-29 22:22:47 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct of_device_id sdhci_at91_dt_match[] = {
|
|
|
|
{ .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 },
|
|
|
|
{}
|
|
|
|
};
|
|
|
|
|
2015-11-12 02:11:48 +08:00
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int sdhci_at91_runtime_suspend(struct device *dev)
|
|
|
|
{
|
|
|
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
|
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
2016-02-16 21:08:25 +08:00
|
|
|
struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
2015-11-12 02:11:48 +08:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = sdhci_runtime_suspend_host(host);
|
|
|
|
|
|
|
|
clk_disable_unprepare(priv->gck);
|
|
|
|
clk_disable_unprepare(priv->hclock);
|
|
|
|
clk_disable_unprepare(priv->mainck);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sdhci_at91_runtime_resume(struct device *dev)
|
|
|
|
{
|
|
|
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
|
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
2016-02-16 21:08:25 +08:00
|
|
|
struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
2015-11-12 02:11:48 +08:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = clk_prepare_enable(priv->mainck);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "can't enable mainck\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = clk_prepare_enable(priv->hclock);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "can't enable hclock\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = clk_prepare_enable(priv->gck);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "can't enable gck\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return sdhci_runtime_resume_host(host);
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
|
|
|
|
static const struct dev_pm_ops sdhci_at91_dev_pm_ops = {
|
|
|
|
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
|
|
|
pm_runtime_force_resume)
|
|
|
|
SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend,
|
|
|
|
sdhci_at91_runtime_resume,
|
|
|
|
NULL)
|
|
|
|
};
|
|
|
|
|
2015-07-29 22:22:47 +08:00
|
|
|
static int sdhci_at91_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
const struct of_device_id *match;
|
|
|
|
const struct sdhci_pltfm_data *soc_data;
|
|
|
|
struct sdhci_host *host;
|
|
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
|
|
struct sdhci_at91_priv *priv;
|
|
|
|
unsigned int caps0, caps1;
|
|
|
|
unsigned int clk_base, clk_mul;
|
|
|
|
unsigned int gck_rate, real_gck_rate;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
match = of_match_device(sdhci_at91_dt_match, &pdev->dev);
|
|
|
|
if (!match)
|
|
|
|
return -EINVAL;
|
|
|
|
soc_data = match->data;
|
|
|
|
|
2016-02-16 21:08:25 +08:00
|
|
|
host = sdhci_pltfm_init(pdev, soc_data, sizeof(*priv));
|
|
|
|
if (IS_ERR(host))
|
|
|
|
return PTR_ERR(host);
|
|
|
|
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
|
|
priv = sdhci_pltfm_priv(pltfm_host);
|
2015-07-29 22:22:47 +08:00
|
|
|
|
|
|
|
priv->mainck = devm_clk_get(&pdev->dev, "baseclk");
|
|
|
|
if (IS_ERR(priv->mainck)) {
|
|
|
|
dev_err(&pdev->dev, "failed to get baseclk\n");
|
|
|
|
return PTR_ERR(priv->mainck);
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->hclock = devm_clk_get(&pdev->dev, "hclock");
|
|
|
|
if (IS_ERR(priv->hclock)) {
|
|
|
|
dev_err(&pdev->dev, "failed to get hclock\n");
|
|
|
|
return PTR_ERR(priv->hclock);
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->gck = devm_clk_get(&pdev->dev, "multclk");
|
|
|
|
if (IS_ERR(priv->gck)) {
|
|
|
|
dev_err(&pdev->dev, "failed to get multclk\n");
|
|
|
|
return PTR_ERR(priv->gck);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The mult clock is provided by as a generated clock by the PMC
|
|
|
|
* controller. In order to set the rate of gck, we have to get the
|
|
|
|
* base clock rate and the clock mult from capabilities.
|
|
|
|
*/
|
|
|
|
clk_prepare_enable(priv->hclock);
|
|
|
|
caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES);
|
|
|
|
caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1);
|
|
|
|
clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
|
|
|
|
clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT;
|
|
|
|
gck_rate = clk_base * 1000000 * (clk_mul + 1);
|
|
|
|
ret = clk_set_rate(priv->gck, gck_rate);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev, "failed to set gck");
|
|
|
|
goto hclock_disable_unprepare;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* We need to check if we have the requested rate for gck because in
|
|
|
|
* some cases this rate could be not supported. If it happens, the rate
|
|
|
|
* is the closest one gck can provide. We have to update the value
|
|
|
|
* of clk mul.
|
|
|
|
*/
|
|
|
|
real_gck_rate = clk_get_rate(priv->gck);
|
|
|
|
if (real_gck_rate != gck_rate) {
|
|
|
|
clk_mul = real_gck_rate / (clk_base * 1000000) - 1;
|
|
|
|
caps1 &= (~SDHCI_CLOCK_MUL_MASK);
|
|
|
|
caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK);
|
|
|
|
/* Set capabilities in r/w mode. */
|
|
|
|
writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR);
|
|
|
|
writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1);
|
|
|
|
/* Set capabilities in ro mode. */
|
|
|
|
writel(0, host->ioaddr + SDMMC_CACR);
|
|
|
|
dev_info(&pdev->dev, "update clk mul to %u as gck rate is %u Hz\n",
|
|
|
|
clk_mul, real_gck_rate);
|
|
|
|
}
|
|
|
|
|
|
|
|
clk_prepare_enable(priv->mainck);
|
|
|
|
clk_prepare_enable(priv->gck);
|
|
|
|
|
|
|
|
ret = mmc_of_parse(host->mmc);
|
|
|
|
if (ret)
|
|
|
|
goto clocks_disable_unprepare;
|
|
|
|
|
|
|
|
sdhci_get_of_property(pdev);
|
|
|
|
|
2015-11-12 02:11:48 +08:00
|
|
|
pm_runtime_get_noresume(&pdev->dev);
|
|
|
|
pm_runtime_set_active(&pdev->dev);
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
|
|
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
|
|
|
2015-07-29 22:22:47 +08:00
|
|
|
ret = sdhci_add_host(host);
|
|
|
|
if (ret)
|
2015-11-12 02:11:48 +08:00
|
|
|
goto pm_runtime_disable;
|
|
|
|
|
2016-03-17 21:54:34 +08:00
|
|
|
/*
|
|
|
|
* When calling sdhci_runtime_suspend_host(), the sdhci layer makes
|
|
|
|
* the assumption that all the clocks of the controller are disabled.
|
|
|
|
* It means we can't get irq from it when it is runtime suspended.
|
|
|
|
* For that reason, it is not planned to wake-up on a card detect irq
|
|
|
|
* from the controller.
|
|
|
|
* If we want to use runtime PM and to be able to wake-up on card
|
|
|
|
* insertion, we have to use a GPIO for the card detection or we can
|
|
|
|
* use polling. Be aware that using polling will resume/suspend the
|
|
|
|
* controller between each attempt.
|
|
|
|
* Disable SDHCI_QUIRK_BROKEN_CARD_DETECTION to be sure nobody tries
|
|
|
|
* to enable polling via device tree with broken-cd property.
|
|
|
|
*/
|
|
|
|
if (!(host->mmc->caps & MMC_CAP_NONREMOVABLE) &&
|
|
|
|
IS_ERR_VALUE(mmc_gpio_get_cd(host->mmc))) {
|
|
|
|
host->mmc->caps |= MMC_CAP_NEEDS_POLL;
|
|
|
|
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
|
|
}
|
|
|
|
|
2015-11-12 02:11:48 +08:00
|
|
|
pm_runtime_put_autosuspend(&pdev->dev);
|
2015-07-29 22:22:47 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
2015-11-12 02:11:48 +08:00
|
|
|
pm_runtime_disable:
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
pm_runtime_set_suspended(&pdev->dev);
|
2016-02-02 19:55:06 +08:00
|
|
|
pm_runtime_put_noidle(&pdev->dev);
|
2015-07-29 22:22:47 +08:00
|
|
|
clocks_disable_unprepare:
|
|
|
|
clk_disable_unprepare(priv->gck);
|
|
|
|
clk_disable_unprepare(priv->mainck);
|
|
|
|
hclock_disable_unprepare:
|
|
|
|
clk_disable_unprepare(priv->hclock);
|
|
|
|
sdhci_pltfm_free(pdev);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sdhci_at91_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
2016-02-16 21:08:25 +08:00
|
|
|
struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
struct clk *gck = priv->gck;
|
|
|
|
struct clk *hclock = priv->hclock;
|
|
|
|
struct clk *mainck = priv->mainck;
|
2015-07-29 22:22:47 +08:00
|
|
|
|
2015-11-12 02:11:48 +08:00
|
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
|
|
|
2015-07-29 22:22:47 +08:00
|
|
|
sdhci_pltfm_unregister(pdev);
|
|
|
|
|
2016-02-16 21:08:25 +08:00
|
|
|
clk_disable_unprepare(gck);
|
|
|
|
clk_disable_unprepare(hclock);
|
|
|
|
clk_disable_unprepare(mainck);
|
2015-07-29 22:22:47 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver sdhci_at91_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "sdhci-at91",
|
|
|
|
.of_match_table = sdhci_at91_dt_match,
|
2015-11-12 02:11:48 +08:00
|
|
|
.pm = &sdhci_at91_dev_pm_ops,
|
2015-07-29 22:22:47 +08:00
|
|
|
},
|
|
|
|
.probe = sdhci_at91_probe,
|
|
|
|
.remove = sdhci_at91_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
module_platform_driver(sdhci_at91_driver);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("SDHCI driver for at91");
|
|
|
|
MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>");
|
|
|
|
MODULE_LICENSE("GPL v2");
|