linux/arch/x86/kvm/mmu/mmu.c

5986 lines
156 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
/*
* Kernel-based Virtual Machine driver for Linux
*
* This module enables machines with Intel VT-x extensions to run virtual
* machines without emulation or binary translation.
*
* MMU support
*
* Copyright (C) 2006 Qumranet, Inc.
* Copyright 2010 Red Hat, Inc. and/or its affiliates.
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
*
* Authors:
* Yaniv Kamay <yaniv@qumranet.com>
* Avi Kivity <avi@qumranet.com>
*/
#include "irq.h"
#include "ioapic.h"
#include "mmu.h"
#include "mmu_internal.h"
#include "tdp_mmu.h"
#include "x86.h"
#include "kvm_cache_regs.h"
#include "kvm_emulate.h"
#include "cpuid.h"
#include "spte.h"
#include <linux/kvm_host.h>
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
#include <linux/types.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/highmem.h>
x86/kvm: Audit and remove any unnecessary uses of module.h Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of kvm where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace as needed. Several instances got replaced with moduleparam.h since that was really all that was required for those particular files. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/20160714001901.31603-8-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14 08:19:00 +08:00
#include <linux/moduleparam.h>
#include <linux/export.h>
#include <linux/swap.h>
#include <linux/hugetlb.h>
#include <linux/compiler.h>
#include <linux/srcu.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/sched/signal.h>
#include <linux/uaccess.h>
kvm: x86: reduce collisions in mmu_page_hash When using two-dimensional paging, the mmu_page_hash (which provides lookups for existing kvm_mmu_page structs), becomes imbalanced; with too many collisions in buckets 0 and 512. This has been seen to cause mmu_lock to be held for multiple milliseconds in kvm_mmu_get_page on VMs with a large amount of RAM mapped with 4K pages. The current hash function uses the lower 10 bits of gfn to index into mmu_page_hash. When doing shadow paging, gfn is the address of the guest page table being shadow. These tables are 4K-aligned, which makes the low bits of gfn a good hash. However, with two-dimensional paging, no guest page tables are being shadowed, so gfn is the base address that is mapped by the table. Thus page tables (level=1) have a 2MB aligned gfn, page directories (level=2) have a 1GB aligned gfn, etc. This means hashes will only differ in their 10th bit. hash_64() provides a better hash. For example, on a VM with ~200G (99458 direct=1 kvm_mmu_page structs): hash max_mmu_page_hash_collisions -------------------------------------------- low 10 bits 49847 hash_64 105 perfect 97 While we're changing the hash, increase the table size by 4x to better support large VMs (further reduces number of collisions in 200G VM to 29). Note that hash_64() does not provide a good distribution prior to commit ef703f49a6c5 ("Eliminate bad hash multipliers from hash_32() and hash_64()"). Signed-off-by: David Matlack <dmatlack@google.com> Change-Id: I5aa6b13c834722813c6cca46b8b1ed6f53368ade Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-20 05:58:25 +08:00
#include <linux/hash.h>
#include <linux/kern_levels.h>
#include <linux/kthread.h>
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
#include <asm/page.h>
#include <asm/memtype.h>
#include <asm/cmpxchg.h>
#include <asm/io.h>
#include <asm/vmx.h>
#include <asm/kvm_page_track.h>
#include "trace.h"
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
extern bool itlb_multihit_kvm_mitigation;
static int __read_mostly nx_huge_pages = -1;
#ifdef CONFIG_PREEMPT_RT
/* Recovery can cause latency spikes, disable it for PREEMPT_RT. */
static uint __read_mostly nx_huge_pages_recovery_ratio = 0;
#else
static uint __read_mostly nx_huge_pages_recovery_ratio = 60;
#endif
static int set_nx_huge_pages(const char *val, const struct kernel_param *kp);
static int set_nx_huge_pages_recovery_ratio(const char *val, const struct kernel_param *kp);
static const struct kernel_param_ops nx_huge_pages_ops = {
.set = set_nx_huge_pages,
.get = param_get_bool,
};
static const struct kernel_param_ops nx_huge_pages_recovery_ratio_ops = {
.set = set_nx_huge_pages_recovery_ratio,
.get = param_get_uint,
};
module_param_cb(nx_huge_pages, &nx_huge_pages_ops, &nx_huge_pages, 0644);
__MODULE_PARM_TYPE(nx_huge_pages, "bool");
module_param_cb(nx_huge_pages_recovery_ratio, &nx_huge_pages_recovery_ratio_ops,
&nx_huge_pages_recovery_ratio, 0644);
__MODULE_PARM_TYPE(nx_huge_pages_recovery_ratio, "uint");
static bool __read_mostly force_flush_and_sync_on_reuse;
module_param_named(flush_on_reuse, force_flush_and_sync_on_reuse, bool, 0644);
/*
* When setting this variable to true it enables Two-Dimensional-Paging
* where the hardware walks 2 page tables:
* 1. the guest-virtual to guest-physical
* 2. while doing 1. it walks guest-physical to host-physical
* If the hardware supports that we don't need to do shadow paging.
*/
bool tdp_enabled = false;
static int max_huge_page_level __read_mostly;
static int max_tdp_level __read_mostly;
enum {
AUDIT_PRE_PAGE_FAULT,
AUDIT_POST_PAGE_FAULT,
AUDIT_PRE_PTE_WRITE,
AUDIT_POST_PTE_WRITE,
AUDIT_PRE_SYNC,
AUDIT_POST_SYNC
};
#ifdef MMU_DEBUG
bool dbg = 0;
module_param(dbg, bool, 0644);
#endif
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
#define PTE_PREFETCH_NUM 8
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
#define PT32_LEVEL_BITS 10
#define PT32_LEVEL_SHIFT(level) \
(PAGE_SHIFT + (level - 1) * PT32_LEVEL_BITS)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
#define PT32_LVL_OFFSET_MASK(level) \
(PT32_BASE_ADDR_MASK & ((1ULL << (PAGE_SHIFT + (((level) - 1) \
* PT32_LEVEL_BITS))) - 1))
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
#define PT32_INDEX(address, level)\
(((address) >> PT32_LEVEL_SHIFT(level)) & ((1 << PT32_LEVEL_BITS) - 1))
#define PT32_BASE_ADDR_MASK PAGE_MASK
#define PT32_DIR_BASE_ADDR_MASK \
(PAGE_MASK & ~((1ULL << (PAGE_SHIFT + PT32_LEVEL_BITS)) - 1))
#define PT32_LVL_ADDR_MASK(level) \
(PAGE_MASK & ~((1ULL << (PAGE_SHIFT + (((level) - 1) \
* PT32_LEVEL_BITS))) - 1))
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
#include <trace/events/kvm.h>
/* make pte_list_desc fit well in cache line */
#define PTE_LIST_EXT 3
/*
* Return values of handle_mmio_page_fault, mmu.page_fault, and fast_page_fault().
*
* RET_PF_RETRY: let CPU fault again on the address.
* RET_PF_EMULATE: mmio page fault, emulate the instruction directly.
* RET_PF_INVALID: the spte is invalid, let the real page fault path update it.
* RET_PF_FIXED: The faulting entry has been fixed.
* RET_PF_SPURIOUS: The faulting entry was already fixed, e.g. by another vCPU.
*/
enum {
RET_PF_RETRY = 0,
RET_PF_EMULATE,
RET_PF_INVALID,
RET_PF_FIXED,
RET_PF_SPURIOUS,
};
struct pte_list_desc {
u64 *sptes[PTE_LIST_EXT];
struct pte_list_desc *more;
};
struct kvm_shadow_walk_iterator {
u64 addr;
hpa_t shadow_addr;
u64 *sptep;
int level;
unsigned index;
};
#define for_each_shadow_entry_using_root(_vcpu, _root, _addr, _walker) \
for (shadow_walk_init_using_root(&(_walker), (_vcpu), \
(_root), (_addr)); \
shadow_walk_okay(&(_walker)); \
shadow_walk_next(&(_walker)))
#define for_each_shadow_entry(_vcpu, _addr, _walker) \
for (shadow_walk_init(&(_walker), _vcpu, _addr); \
shadow_walk_okay(&(_walker)); \
shadow_walk_next(&(_walker)))
#define for_each_shadow_entry_lockless(_vcpu, _addr, _walker, spte) \
for (shadow_walk_init(&(_walker), _vcpu, _addr); \
shadow_walk_okay(&(_walker)) && \
({ spte = mmu_spte_get_lockless(_walker.sptep); 1; }); \
__shadow_walk_next(&(_walker), spte))
static struct kmem_cache *pte_list_desc_cache;
struct kmem_cache *mmu_page_header_cache;
static struct percpu_counter kvm_total_used_mmu_pages;
static void mmu_spte_set(u64 *sptep, u64 spte);
static union kvm_mmu_page_role
kvm_mmu_calc_root_page_role(struct kvm_vcpu *vcpu);
#define CREATE_TRACE_POINTS
#include "mmutrace.h"
static inline bool kvm_available_flush_tlb_with_range(void)
{
return kvm_x86_ops.tlb_remote_flush_with_range;
}
static void kvm_flush_remote_tlbs_with_range(struct kvm *kvm,
struct kvm_tlb_range *range)
{
int ret = -ENOTSUPP;
if (range && kvm_x86_ops.tlb_remote_flush_with_range)
ret = kvm_x86_ops.tlb_remote_flush_with_range(kvm, range);
if (ret)
kvm_flush_remote_tlbs(kvm);
}
void kvm_flush_remote_tlbs_with_address(struct kvm *kvm,
u64 start_gfn, u64 pages)
{
struct kvm_tlb_range range;
range.start_gfn = start_gfn;
range.pages = pages;
kvm_flush_remote_tlbs_with_range(kvm, &range);
}
bool is_nx_huge_page_enabled(void)
{
return READ_ONCE(nx_huge_pages);
}
static void mark_mmio_spte(struct kvm_vcpu *vcpu, u64 *sptep, u64 gfn,
unsigned int access)
{
u64 mask = make_mmio_spte(vcpu, gfn, access);
unsigned int gen = get_mmio_spte_generation(mask);
access = mask & ACC_ALL;
trace_mark_mmio_spte(sptep, gfn, access, gen);
mmu_spte_set(sptep, mask);
}
static gfn_t get_mmio_spte_gfn(u64 spte)
{
KVM: x86: fix L1TF's MMIO GFN calculation One defense against L1TF in KVM is to always set the upper five bits of the *legal* physical address in the SPTEs for non-present and reserved SPTEs, e.g. MMIO SPTEs. In the MMIO case, the GFN of the MMIO SPTE may overlap with the upper five bits that are being usurped to defend against L1TF. To preserve the GFN, the bits of the GFN that overlap with the repurposed bits are shifted left into the reserved bits, i.e. the GFN in the SPTE will be split into high and low parts. When retrieving the GFN from the MMIO SPTE, e.g. to check for an MMIO access, get_mmio_spte_gfn() unshifts the affected bits and restores the original GFN for comparison. Unfortunately, get_mmio_spte_gfn() neglects to mask off the reserved bits in the SPTE that were used to store the upper chunk of the GFN. As a result, KVM fails to detect MMIO accesses whose GPA overlaps the repurprosed bits, which in turn causes guest panics and hangs. Fix the bug by generating a mask that covers the lower chunk of the GFN, i.e. the bits that aren't shifted by the L1TF mitigation. The alternative approach would be to explicitly zero the five reserved bits that are used to store the upper chunk of the GFN, but that requires additional run-time computation and makes an already-ugly bit of code even more inscrutable. I considered adding a WARN_ON_ONCE(low_phys_bits-1 <= PAGE_SHIFT) to warn if GENMASK_ULL() generated a nonsensical value, but that seemed silly since that would mean a system that supports VMX has less than 18 bits of physical address space... Reported-by: Sakari Ailus <sakari.ailus@iki.fi> Fixes: d9b47449c1a1 ("kvm: x86: Set highest physical address bits in non-present/reserved SPTEs") Cc: Junaid Shahid <junaids@google.com> Cc: Jim Mattson <jmattson@google.com> Cc: stable@vger.kernel.org Reviewed-by: Junaid Shahid <junaids@google.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-26 04:20:00 +08:00
u64 gpa = spte & shadow_nonpresent_or_rsvd_lower_gfn_mask;
gpa |= (spte >> shadow_nonpresent_or_rsvd_mask_len)
& shadow_nonpresent_or_rsvd_mask;
return gpa >> PAGE_SHIFT;
}
static unsigned get_mmio_spte_access(u64 spte)
{
KVM: x86/mmu: Add explicit access mask for MMIO SPTEs When shadow paging is enabled, KVM tracks the allowed access type for MMIO SPTEs so that it can do a permission check on a MMIO GVA cache hit without having to walk the guest's page tables. The tracking is done by retaining the WRITE and USER bits of the access when inserting the MMIO SPTE (read access is implicitly allowed), which allows the MMIO page fault handler to retrieve and cache the WRITE/USER bits from the SPTE. Unfortunately for EPT, the mask used to retain the WRITE/USER bits is hardcoded using the x86 paging versions of the bits. This funkiness happens to work because KVM uses a completely different mask/value for MMIO SPTEs when EPT is enabled, and the EPT mask/value just happens to overlap exactly with the x86 WRITE/USER bits[*]. Explicitly define the access mask for MMIO SPTEs to accurately reflect that EPT does not want to incorporate any access bits into the SPTE, and so that KVM isn't subtly relying on EPT's WX bits always being set in MMIO SPTEs, e.g. attempting to use other bits for experimentation breaks horribly. Note, vcpu_match_mmio_gva() explicits prevents matching GVA==0, and all TDP flows explicit set mmio_gva to 0, i.e. zeroing vcpu->arch.access for EPT has no (known) functional impact. [*] Using WX to generate EPT misconfigurations (equivalent to reserved bit page fault) ensures KVM can employ its MMIO page fault tricks even platforms without reserved address bits. Fixes: ce88decffd17 ("KVM: MMU: mmio page fault support") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-02 04:35:22 +08:00
return spte & shadow_mmio_access_mask;
}
static bool set_mmio_spte(struct kvm_vcpu *vcpu, u64 *sptep, gfn_t gfn,
kvm_pfn_t pfn, unsigned int access)
{
if (unlikely(is_noslot_pfn(pfn))) {
mark_mmio_spte(vcpu, sptep, gfn, access);
return true;
}
return false;
}
static bool check_mmio_spte(struct kvm_vcpu *vcpu, u64 spte)
{
u64 kvm_gen, spte_gen, gen;
gen = kvm_vcpu_memslots(vcpu)->generation;
if (unlikely(gen & KVM_MEMSLOT_GEN_UPDATE_IN_PROGRESS))
return false;
kvm_gen = gen & MMIO_SPTE_GEN_MASK;
spte_gen = get_mmio_spte_generation(spte);
trace_check_mmio_spte(spte, kvm_gen, spte_gen);
return likely(kvm_gen == spte_gen);
}
static gpa_t translate_gpa(struct kvm_vcpu *vcpu, gpa_t gpa, u32 access,
struct x86_exception *exception)
{
/* Check if guest physical address doesn't exceed guest maximum */
if (kvm_vcpu_is_illegal_gpa(vcpu, gpa)) {
exception->error_code |= PFERR_RSVD_MASK;
return UNMAPPED_GVA;
}
return gpa;
}
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
static int is_cpuid_PSE36(void)
{
return 1;
}
static int is_nx(struct kvm_vcpu *vcpu)
{
return vcpu->arch.efer & EFER_NX;
}
static gfn_t pse36_gfn_delta(u32 gpte)
{
int shift = 32 - PT32_DIR_PSE36_SHIFT - PAGE_SHIFT;
return (gpte & PT32_DIR_PSE36_MASK) << shift;
}
#ifdef CONFIG_X86_64
static void __set_spte(u64 *sptep, u64 spte)
{
WRITE_ONCE(*sptep, spte);
}
static void __update_clear_spte_fast(u64 *sptep, u64 spte)
{
WRITE_ONCE(*sptep, spte);
}
static u64 __update_clear_spte_slow(u64 *sptep, u64 spte)
{
return xchg(sptep, spte);
}
static u64 __get_spte_lockless(u64 *sptep)
{
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24 05:07:29 +08:00
return READ_ONCE(*sptep);
}
#else
union split_spte {
struct {
u32 spte_low;
u32 spte_high;
};
u64 spte;
};
static void count_spte_clear(u64 *sptep, u64 spte)
{
struct kvm_mmu_page *sp = sptep_to_sp(sptep);
if (is_shadow_present_pte(spte))
return;
/* Ensure the spte is completely set before we increase the count */
smp_wmb();
sp->clear_spte_count++;
}
static void __set_spte(u64 *sptep, u64 spte)
{
union split_spte *ssptep, sspte;
ssptep = (union split_spte *)sptep;
sspte = (union split_spte)spte;
ssptep->spte_high = sspte.spte_high;
/*
* If we map the spte from nonpresent to present, We should store
* the high bits firstly, then set present bit, so cpu can not
* fetch this spte while we are setting the spte.
*/
smp_wmb();
WRITE_ONCE(ssptep->spte_low, sspte.spte_low);
}
static void __update_clear_spte_fast(u64 *sptep, u64 spte)
{
union split_spte *ssptep, sspte;
ssptep = (union split_spte *)sptep;
sspte = (union split_spte)spte;
WRITE_ONCE(ssptep->spte_low, sspte.spte_low);
/*
* If we map the spte from present to nonpresent, we should clear
* present bit firstly to avoid vcpu fetch the old high bits.
*/
smp_wmb();
ssptep->spte_high = sspte.spte_high;
count_spte_clear(sptep, spte);
}
static u64 __update_clear_spte_slow(u64 *sptep, u64 spte)
{
union split_spte *ssptep, sspte, orig;
ssptep = (union split_spte *)sptep;
sspte = (union split_spte)spte;
/* xchg acts as a barrier before the setting of the high bits */
orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low);
orig.spte_high = ssptep->spte_high;
ssptep->spte_high = sspte.spte_high;
count_spte_clear(sptep, spte);
return orig.spte;
}
/*
* The idea using the light way get the spte on x86_32 guest is from
* gup_get_pte (mm/gup.c).
*
* An spte tlb flush may be pending, because kvm_set_pte_rmapp
* coalesces them and we are running out of the MMU lock. Therefore
* we need to protect against in-progress updates of the spte.
*
* Reading the spte while an update is in progress may get the old value
* for the high part of the spte. The race is fine for a present->non-present
* change (because the high part of the spte is ignored for non-present spte),
* but for a present->present change we must reread the spte.
*
* All such changes are done in two steps (present->non-present and
* non-present->present), hence it is enough to count the number of
* present->non-present updates: if it changed while reading the spte,
* we might have hit the race. This is done using clear_spte_count.
*/
static u64 __get_spte_lockless(u64 *sptep)
{
struct kvm_mmu_page *sp = sptep_to_sp(sptep);
union split_spte spte, *orig = (union split_spte *)sptep;
int count;
retry:
count = sp->clear_spte_count;
smp_rmb();
spte.spte_low = orig->spte_low;
smp_rmb();
spte.spte_high = orig->spte_high;
smp_rmb();
if (unlikely(spte.spte_low != orig->spte_low ||
count != sp->clear_spte_count))
goto retry;
return spte.spte;
}
#endif
static bool spte_has_volatile_bits(u64 spte)
{
if (!is_shadow_present_pte(spte))
return false;
/*
* Always atomically update spte if it can be updated
* out of mmu-lock, it can ensure dirty bit is not lost,
* also, it can help us to get a stable is_writable_pte()
* to ensure tlb flush is not missed.
*/
if (spte_can_locklessly_be_made_writable(spte) ||
is_access_track_spte(spte))
return true;
if (spte_ad_enabled(spte)) {
if ((spte & shadow_accessed_mask) == 0 ||
(is_writable_pte(spte) && (spte & shadow_dirty_mask) == 0))
return true;
}
return false;
}
/* Rules for using mmu_spte_set:
* Set the sptep from nonpresent to present.
* Note: the sptep being assigned *must* be either not present
* or in a state where the hardware will not attempt to update
* the spte.
*/
static void mmu_spte_set(u64 *sptep, u64 new_spte)
{
WARN_ON(is_shadow_present_pte(*sptep));
__set_spte(sptep, new_spte);
}
/*
* Update the SPTE (excluding the PFN), but do not track changes in its
* accessed/dirty status.
*/
static u64 mmu_spte_update_no_track(u64 *sptep, u64 new_spte)
{
u64 old_spte = *sptep;
WARN_ON(!is_shadow_present_pte(new_spte));
if (!is_shadow_present_pte(old_spte)) {
mmu_spte_set(sptep, new_spte);
return old_spte;
}
if (!spte_has_volatile_bits(old_spte))
__update_clear_spte_fast(sptep, new_spte);
else
old_spte = __update_clear_spte_slow(sptep, new_spte);
WARN_ON(spte_to_pfn(old_spte) != spte_to_pfn(new_spte));
return old_spte;
}
/* Rules for using mmu_spte_update:
* Update the state bits, it means the mapped pfn is not changed.
*
* Whenever we overwrite a writable spte with a read-only one we
* should flush remote TLBs. Otherwise rmap_write_protect
* will find a read-only spte, even though the writable spte
* might be cached on a CPU's TLB, the return value indicates this
* case.
*
* Returns true if the TLB needs to be flushed
*/
static bool mmu_spte_update(u64 *sptep, u64 new_spte)
{
bool flush = false;
u64 old_spte = mmu_spte_update_no_track(sptep, new_spte);
if (!is_shadow_present_pte(old_spte))
return false;
/*
* For the spte updated out of mmu-lock is safe, since
* we always atomically update it, see the comments in
* spte_has_volatile_bits().
*/
if (spte_can_locklessly_be_made_writable(old_spte) &&
!is_writable_pte(new_spte))
flush = true;
/*
* Flush TLB when accessed/dirty states are changed in the page tables,
* to guarantee consistency between TLB and page tables.
*/
if (is_accessed_spte(old_spte) && !is_accessed_spte(new_spte)) {
flush = true;
kvm_set_pfn_accessed(spte_to_pfn(old_spte));
}
if (is_dirty_spte(old_spte) && !is_dirty_spte(new_spte)) {
flush = true;
kvm_set_pfn_dirty(spte_to_pfn(old_spte));
}
return flush;
}
/*
* Rules for using mmu_spte_clear_track_bits:
* It sets the sptep from present to nonpresent, and track the
* state bits, it is used to clear the last level sptep.
* Returns non-zero if the PTE was previously valid.
*/
static int mmu_spte_clear_track_bits(u64 *sptep)
{
kvm: rename pfn_t to kvm_pfn_t To date, we have implemented two I/O usage models for persistent memory, PMEM (a persistent "ram disk") and DAX (mmap persistent memory into userspace). This series adds a third, DAX-GUP, that allows DAX mappings to be the target of direct-i/o. It allows userspace to coordinate DMA/RDMA from/to persistent memory. The implementation leverages the ZONE_DEVICE mm-zone that went into 4.3-rc1 (also discussed at kernel summit) to flag pages that are owned and dynamically mapped by a device driver. The pmem driver, after mapping a persistent memory range into the system memmap via devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus page-backed pmem-pfns via flags in the new pfn_t type. The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the resulting pte(s) inserted into the process page tables with a new _PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys off _PAGE_DEVMAP to pin the device hosting the page range active. Finally, get_page() and put_page() are modified to take references against the device driver established page mapping. Finally, this need for "struct page" for persistent memory requires memory capacity to store the memmap array. Given the memmap array for a large pool of persistent may exhaust available DRAM introduce a mechanism to allocate the memmap from persistent memory. The new "struct vmem_altmap *" parameter to devm_memremap_pages() enables arch_add_memory() to use reserved pmem capacity rather than the page allocator. This patch (of 18): The core has developed a need for a "pfn_t" type [1]. Move the existing pfn_t in KVM to kvm_pfn_t [2]. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:56:11 +08:00
kvm_pfn_t pfn;
u64 old_spte = *sptep;
if (!spte_has_volatile_bits(old_spte))
__update_clear_spte_fast(sptep, 0ull);
else
old_spte = __update_clear_spte_slow(sptep, 0ull);
if (!is_shadow_present_pte(old_spte))
return 0;
pfn = spte_to_pfn(old_spte);
/*
* KVM does not hold the refcount of the page used by
* kvm mmu, before reclaiming the page, we should
* unmap it from mmu first.
*/
WARN_ON(!kvm_is_reserved_pfn(pfn) && !page_count(pfn_to_page(pfn)));
if (is_accessed_spte(old_spte))
kvm_set_pfn_accessed(pfn);
if (is_dirty_spte(old_spte))
kvm_set_pfn_dirty(pfn);
return 1;
}
/*
* Rules for using mmu_spte_clear_no_track:
* Directly clear spte without caring the state bits of sptep,
* it is used to set the upper level spte.
*/
static void mmu_spte_clear_no_track(u64 *sptep)
{
__update_clear_spte_fast(sptep, 0ull);
}
static u64 mmu_spte_get_lockless(u64 *sptep)
{
return __get_spte_lockless(sptep);
}
/* Restore an acc-track PTE back to a regular PTE */
static u64 restore_acc_track_spte(u64 spte)
{
u64 new_spte = spte;
u64 saved_bits = (spte >> shadow_acc_track_saved_bits_shift)
& shadow_acc_track_saved_bits_mask;
WARN_ON_ONCE(spte_ad_enabled(spte));
WARN_ON_ONCE(!is_access_track_spte(spte));
new_spte &= ~shadow_acc_track_mask;
new_spte &= ~(shadow_acc_track_saved_bits_mask <<
shadow_acc_track_saved_bits_shift);
new_spte |= saved_bits;
return new_spte;
}
/* Returns the Accessed status of the PTE and resets it at the same time. */
static bool mmu_spte_age(u64 *sptep)
{
u64 spte = mmu_spte_get_lockless(sptep);
if (!is_accessed_spte(spte))
return false;
if (spte_ad_enabled(spte)) {
clear_bit((ffs(shadow_accessed_mask) - 1),
(unsigned long *)sptep);
} else {
/*
* Capture the dirty status of the page, so that it doesn't get
* lost when the SPTE is marked for access tracking.
*/
if (is_writable_pte(spte))
kvm_set_pfn_dirty(spte_to_pfn(spte));
spte = mark_spte_for_access_track(spte);
mmu_spte_update_no_track(sptep, spte);
}
return true;
}
static void walk_shadow_page_lockless_begin(struct kvm_vcpu *vcpu)
{
/*
* Prevent page table teardown by making any free-er wait during
* kvm_flush_remote_tlbs() IPI to all active vcpus.
*/
local_irq_disable();
/*
* Make sure a following spte read is not reordered ahead of the write
* to vcpu->mode.
*/
smp_store_mb(vcpu->mode, READING_SHADOW_PAGE_TABLES);
}
static void walk_shadow_page_lockless_end(struct kvm_vcpu *vcpu)
{
/*
* Make sure the write to vcpu->mode is not reordered in front of
* reads to sptes. If it does, kvm_mmu_commit_zap_page() can see us
* OUTSIDE_GUEST_MODE and proceed to free the shadow page table.
*/
smp_store_release(&vcpu->mode, OUTSIDE_GUEST_MODE);
local_irq_enable();
}
static int mmu_topup_memory_caches(struct kvm_vcpu *vcpu, bool maybe_indirect)
{
int r;
KVM: x86/mmu: Clean up the gorilla math in mmu_topup_memory_caches() Clean up the minimums in mmu_topup_memory_caches() to document the driving mechanisms behind the minimums. Now that encountering an empty cache is unlikely to trigger BUG_ON(), it is less dangerous to be more precise when defining the minimums. For rmaps, the logic is 1 parent PTE per level, plus a single rmap, and prefetched rmaps. The extra objects in the current '8 + PREFETCH' minimum came about due to an abundance of paranoia in commit c41ef344de212 ("KVM: MMU: increase per-vcpu rmap cache alloc size"), i.e. it could have increased the minimum to 2 rmaps. Furthermore, the unexpected extra rmap case was killed off entirely by commits f759e2b4c728c ("KVM: MMU: avoid pte_list_desc running out in kvm_mmu_pte_write") and f5a1e9f89504f ("KVM: MMU: remove call to kvm_mmu_pte_write from walk_addr"). For the so called page cache, replace '8' with 2*PT64_ROOT_MAX_LEVEL. The 2x multiplier is needed because the cache is used for both shadow pages and gfn arrays for indirect MMUs. And finally, for page headers, replace '4' with PT64_ROOT_MAX_LEVEL. Note, KVM now supports 5-level paging, i.e. the old minimums that used a baseline derived from 4-level paging were technically wrong. But, KVM always allocates roots in a separate flow, e.g. it's impossible in the current implementation to actually need 5 new shadow pages in a single flow. Use PT64_ROOT_MAX_LEVEL unmodified instead of subtracting 1, as the direct usage is likely more intuitive to uninformed readers, and the inflated minimum is unlikely to affect functionality in practice. Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200703023545.8771-9-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-03 10:35:32 +08:00
/* 1 rmap, 1 parent PTE per level, and the prefetched rmaps. */
r = kvm_mmu_topup_memory_cache(&vcpu->arch.mmu_pte_list_desc_cache,
1 + PT64_ROOT_MAX_LEVEL + PTE_PREFETCH_NUM);
if (r)
return r;
r = kvm_mmu_topup_memory_cache(&vcpu->arch.mmu_shadow_page_cache,
PT64_ROOT_MAX_LEVEL);
if (r)
return r;
if (maybe_indirect) {
r = kvm_mmu_topup_memory_cache(&vcpu->arch.mmu_gfn_array_cache,
PT64_ROOT_MAX_LEVEL);
if (r)
return r;
}
return kvm_mmu_topup_memory_cache(&vcpu->arch.mmu_page_header_cache,
PT64_ROOT_MAX_LEVEL);
}
static void mmu_free_memory_caches(struct kvm_vcpu *vcpu)
{
kvm_mmu_free_memory_cache(&vcpu->arch.mmu_pte_list_desc_cache);
kvm_mmu_free_memory_cache(&vcpu->arch.mmu_shadow_page_cache);
kvm_mmu_free_memory_cache(&vcpu->arch.mmu_gfn_array_cache);
kvm_mmu_free_memory_cache(&vcpu->arch.mmu_page_header_cache);
}
static struct pte_list_desc *mmu_alloc_pte_list_desc(struct kvm_vcpu *vcpu)
{
return kvm_mmu_memory_cache_alloc(&vcpu->arch.mmu_pte_list_desc_cache);
}
static void mmu_free_pte_list_desc(struct pte_list_desc *pte_list_desc)
{
kmem_cache_free(pte_list_desc_cache, pte_list_desc);
}
static gfn_t kvm_mmu_page_get_gfn(struct kvm_mmu_page *sp, int index)
{
if (!sp->role.direct)
return sp->gfns[index];
return sp->gfn + (index << ((sp->role.level - 1) * PT64_LEVEL_BITS));
}
static void kvm_mmu_page_set_gfn(struct kvm_mmu_page *sp, int index, gfn_t gfn)
{
if (!sp->role.direct) {
sp->gfns[index] = gfn;
return;
}
if (WARN_ON(gfn != kvm_mmu_page_get_gfn(sp, index)))
pr_err_ratelimited("gfn mismatch under direct page %llx "
"(expected %llx, got %llx)\n",
sp->gfn,
kvm_mmu_page_get_gfn(sp, index), gfn);
}
/*
* Return the pointer to the large page information for a given gfn,
* handling slots that are not large page aligned.
*/
static struct kvm_lpage_info *lpage_info_slot(gfn_t gfn,
struct kvm_memory_slot *slot,
int level)
{
unsigned long idx;
idx = gfn_to_index(gfn, slot->base_gfn, level);
return &slot->arch.lpage_info[level - 2][idx];
}
static void update_gfn_disallow_lpage_count(struct kvm_memory_slot *slot,
gfn_t gfn, int count)
{
struct kvm_lpage_info *linfo;
int i;
for (i = PG_LEVEL_2M; i <= KVM_MAX_HUGEPAGE_LEVEL; ++i) {
linfo = lpage_info_slot(gfn, slot, i);
linfo->disallow_lpage += count;
WARN_ON(linfo->disallow_lpage < 0);
}
}
void kvm_mmu_gfn_disallow_lpage(struct kvm_memory_slot *slot, gfn_t gfn)
{
update_gfn_disallow_lpage_count(slot, gfn, 1);
}
void kvm_mmu_gfn_allow_lpage(struct kvm_memory_slot *slot, gfn_t gfn)
{
update_gfn_disallow_lpage_count(slot, gfn, -1);
}
static void account_shadowed(struct kvm *kvm, struct kvm_mmu_page *sp)
{
struct kvm_memslots *slots;
struct kvm_memory_slot *slot;
gfn_t gfn;
kvm->arch.indirect_shadow_pages++;
gfn = sp->gfn;
slots = kvm_memslots_for_spte_role(kvm, sp->role);
slot = __gfn_to_memslot(slots, gfn);
/* the non-leaf shadow pages are keeping readonly. */
if (sp->role.level > PG_LEVEL_4K)
return kvm_slot_page_track_add_page(kvm, slot, gfn,
KVM_PAGE_TRACK_WRITE);
kvm_mmu_gfn_disallow_lpage(slot, gfn);
}
static void account_huge_nx_page(struct kvm *kvm, struct kvm_mmu_page *sp)
{
if (sp->lpage_disallowed)
return;
++kvm->stat.nx_lpage_splits;
list_add_tail(&sp->lpage_disallowed_link,
&kvm->arch.lpage_disallowed_mmu_pages);
sp->lpage_disallowed = true;
}
static void unaccount_shadowed(struct kvm *kvm, struct kvm_mmu_page *sp)
{
struct kvm_memslots *slots;
struct kvm_memory_slot *slot;
gfn_t gfn;
kvm->arch.indirect_shadow_pages--;
gfn = sp->gfn;
slots = kvm_memslots_for_spte_role(kvm, sp->role);
slot = __gfn_to_memslot(slots, gfn);
if (sp->role.level > PG_LEVEL_4K)
return kvm_slot_page_track_remove_page(kvm, slot, gfn,
KVM_PAGE_TRACK_WRITE);
kvm_mmu_gfn_allow_lpage(slot, gfn);
}
static void unaccount_huge_nx_page(struct kvm *kvm, struct kvm_mmu_page *sp)
{
--kvm->stat.nx_lpage_splits;
sp->lpage_disallowed = false;
list_del(&sp->lpage_disallowed_link);
}
static struct kvm_memory_slot *
gfn_to_memslot_dirty_bitmap(struct kvm_vcpu *vcpu, gfn_t gfn,
bool no_dirty_log)
{
struct kvm_memory_slot *slot;
slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
if (!slot || slot->flags & KVM_MEMSLOT_INVALID)
return NULL;
if (no_dirty_log && slot->dirty_bitmap)
return NULL;
return slot;
}
/*
* About rmap_head encoding:
*
* If the bit zero of rmap_head->val is clear, then it points to the only spte
* in this rmap chain. Otherwise, (rmap_head->val & ~1) points to a struct
* pte_list_desc containing more mappings.
*/
/*
* Returns the number of pointers in the rmap chain, not counting the new one.
*/
static int pte_list_add(struct kvm_vcpu *vcpu, u64 *spte,
struct kvm_rmap_head *rmap_head)
{
struct pte_list_desc *desc;
int i, count = 0;
if (!rmap_head->val) {
rmap_printk("pte_list_add: %p %llx 0->1\n", spte, *spte);
rmap_head->val = (unsigned long)spte;
} else if (!(rmap_head->val & 1)) {
rmap_printk("pte_list_add: %p %llx 1->many\n", spte, *spte);
desc = mmu_alloc_pte_list_desc(vcpu);
desc->sptes[0] = (u64 *)rmap_head->val;
desc->sptes[1] = spte;
rmap_head->val = (unsigned long)desc | 1;
++count;
} else {
rmap_printk("pte_list_add: %p %llx many->many\n", spte, *spte);
desc = (struct pte_list_desc *)(rmap_head->val & ~1ul);
while (desc->sptes[PTE_LIST_EXT-1] && desc->more) {
desc = desc->more;
count += PTE_LIST_EXT;
}
if (desc->sptes[PTE_LIST_EXT-1]) {
desc->more = mmu_alloc_pte_list_desc(vcpu);
desc = desc->more;
}
for (i = 0; desc->sptes[i]; ++i)
++count;
desc->sptes[i] = spte;
}
return count;
}
static void
pte_list_desc_remove_entry(struct kvm_rmap_head *rmap_head,
struct pte_list_desc *desc, int i,
struct pte_list_desc *prev_desc)
{
int j;
for (j = PTE_LIST_EXT - 1; !desc->sptes[j] && j > i; --j)
;
desc->sptes[i] = desc->sptes[j];
desc->sptes[j] = NULL;
if (j != 0)
return;
if (!prev_desc && !desc->more)
rmap_head->val = 0;
else
if (prev_desc)
prev_desc->more = desc->more;
else
rmap_head->val = (unsigned long)desc->more | 1;
mmu_free_pte_list_desc(desc);
}
static void __pte_list_remove(u64 *spte, struct kvm_rmap_head *rmap_head)
{
struct pte_list_desc *desc;
struct pte_list_desc *prev_desc;
int i;
if (!rmap_head->val) {
pr_err("%s: %p 0->BUG\n", __func__, spte);
BUG();
} else if (!(rmap_head->val & 1)) {
rmap_printk("%s: %p 1->0\n", __func__, spte);
if ((u64 *)rmap_head->val != spte) {
pr_err("%s: %p 1->BUG\n", __func__, spte);
BUG();
}
rmap_head->val = 0;
} else {
rmap_printk("%s: %p many->many\n", __func__, spte);
desc = (struct pte_list_desc *)(rmap_head->val & ~1ul);
prev_desc = NULL;
while (desc) {
for (i = 0; i < PTE_LIST_EXT && desc->sptes[i]; ++i) {
if (desc->sptes[i] == spte) {
pte_list_desc_remove_entry(rmap_head,
desc, i, prev_desc);
return;
}
}
prev_desc = desc;
desc = desc->more;
}
pr_err("%s: %p many->many\n", __func__, spte);
BUG();
}
}
static void pte_list_remove(struct kvm_rmap_head *rmap_head, u64 *sptep)
{
mmu_spte_clear_track_bits(sptep);
__pte_list_remove(sptep, rmap_head);
}
static struct kvm_rmap_head *__gfn_to_rmap(gfn_t gfn, int level,
struct kvm_memory_slot *slot)
{
unsigned long idx;
idx = gfn_to_index(gfn, slot->base_gfn, level);
return &slot->arch.rmap[level - PG_LEVEL_4K][idx];
}
static struct kvm_rmap_head *gfn_to_rmap(struct kvm *kvm, gfn_t gfn,
struct kvm_mmu_page *sp)
{
struct kvm_memslots *slots;
struct kvm_memory_slot *slot;
slots = kvm_memslots_for_spte_role(kvm, sp->role);
slot = __gfn_to_memslot(slots, gfn);
return __gfn_to_rmap(gfn, sp->role.level, slot);
}
static bool rmap_can_add(struct kvm_vcpu *vcpu)
{
struct kvm_mmu_memory_cache *mc;
mc = &vcpu->arch.mmu_pte_list_desc_cache;
return kvm_mmu_memory_cache_nr_free_objects(mc);
}
static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
{
struct kvm_mmu_page *sp;
struct kvm_rmap_head *rmap_head;
sp = sptep_to_sp(spte);
kvm_mmu_page_set_gfn(sp, spte - sp->spt, gfn);
rmap_head = gfn_to_rmap(vcpu->kvm, gfn, sp);
return pte_list_add(vcpu, spte, rmap_head);
}
static void rmap_remove(struct kvm *kvm, u64 *spte)
{
struct kvm_mmu_page *sp;
gfn_t gfn;
struct kvm_rmap_head *rmap_head;
sp = sptep_to_sp(spte);
gfn = kvm_mmu_page_get_gfn(sp, spte - sp->spt);
rmap_head = gfn_to_rmap(kvm, gfn, sp);
__pte_list_remove(spte, rmap_head);
}
/*
* Used by the following functions to iterate through the sptes linked by a
* rmap. All fields are private and not assumed to be used outside.
*/
struct rmap_iterator {
/* private fields */
struct pte_list_desc *desc; /* holds the sptep if not NULL */
int pos; /* index of the sptep */
};
/*
* Iteration must be started by this function. This should also be used after
* removing/dropping sptes from the rmap link because in such cases the
* information in the iterator may not be valid.
*
* Returns sptep if found, NULL otherwise.
*/
static u64 *rmap_get_first(struct kvm_rmap_head *rmap_head,
struct rmap_iterator *iter)
{
u64 *sptep;
if (!rmap_head->val)
return NULL;
if (!(rmap_head->val & 1)) {
iter->desc = NULL;
sptep = (u64 *)rmap_head->val;
goto out;
}
iter->desc = (struct pte_list_desc *)(rmap_head->val & ~1ul);
iter->pos = 0;
sptep = iter->desc->sptes[iter->pos];
out:
BUG_ON(!is_shadow_present_pte(*sptep));
return sptep;
}
/*
* Must be used with a valid iterator: e.g. after rmap_get_first().
*
* Returns sptep if found, NULL otherwise.
*/
static u64 *rmap_get_next(struct rmap_iterator *iter)
{
u64 *sptep;
if (iter->desc) {
if (iter->pos < PTE_LIST_EXT - 1) {
++iter->pos;
sptep = iter->desc->sptes[iter->pos];
if (sptep)
goto out;
}
iter->desc = iter->desc->more;
if (iter->desc) {
iter->pos = 0;
/* desc->sptes[0] cannot be NULL */
sptep = iter->desc->sptes[iter->pos];
goto out;
}
}
return NULL;
out:
BUG_ON(!is_shadow_present_pte(*sptep));
return sptep;
}
#define for_each_rmap_spte(_rmap_head_, _iter_, _spte_) \
for (_spte_ = rmap_get_first(_rmap_head_, _iter_); \
_spte_; _spte_ = rmap_get_next(_iter_))
static void drop_spte(struct kvm *kvm, u64 *sptep)
{
if (mmu_spte_clear_track_bits(sptep))
rmap_remove(kvm, sptep);
}
static bool __drop_large_spte(struct kvm *kvm, u64 *sptep)
{
if (is_large_pte(*sptep)) {
WARN_ON(sptep_to_sp(sptep)->role.level == PG_LEVEL_4K);
drop_spte(kvm, sptep);
--kvm->stat.lpages;
return true;
}
return false;
}
static void drop_large_spte(struct kvm_vcpu *vcpu, u64 *sptep)
{
if (__drop_large_spte(vcpu->kvm, sptep)) {
struct kvm_mmu_page *sp = sptep_to_sp(sptep);
kvm_flush_remote_tlbs_with_address(vcpu->kvm, sp->gfn,
KVM_PAGES_PER_HPAGE(sp->role.level));
}
}
/*
* Write-protect on the specified @sptep, @pt_protect indicates whether
* spte write-protection is caused by protecting shadow page table.
*
* Note: write protection is difference between dirty logging and spte
* protection:
* - for dirty logging, the spte can be set to writable at anytime if
* its dirty bitmap is properly set.
* - for spte protection, the spte can be writable only after unsync-ing
* shadow page.
*
* Return true if tlb need be flushed.
*/
static bool spte_write_protect(u64 *sptep, bool pt_protect)
{
u64 spte = *sptep;
if (!is_writable_pte(spte) &&
!(pt_protect && spte_can_locklessly_be_made_writable(spte)))
return false;
rmap_printk("rmap_write_protect: spte %p %llx\n", sptep, *sptep);
if (pt_protect)
spte &= ~SPTE_MMU_WRITEABLE;
spte = spte & ~PT_WRITABLE_MASK;
return mmu_spte_update(sptep, spte);
}
static bool __rmap_write_protect(struct kvm *kvm,
struct kvm_rmap_head *rmap_head,
bool pt_protect)
{
u64 *sptep;
struct rmap_iterator iter;
bool flush = false;
for_each_rmap_spte(rmap_head, &iter, sptep)
flush |= spte_write_protect(sptep, pt_protect);
return flush;
}
static bool spte_clear_dirty(u64 *sptep)
{
u64 spte = *sptep;
rmap_printk("rmap_clear_dirty: spte %p %llx\n", sptep, *sptep);
MMU_WARN_ON(!spte_ad_enabled(spte));
spte &= ~shadow_dirty_mask;
return mmu_spte_update(sptep, spte);
}
static bool spte_wrprot_for_clear_dirty(u64 *sptep)
{
bool was_writable = test_and_clear_bit(PT_WRITABLE_SHIFT,
(unsigned long *)sptep);
if (was_writable && !spte_ad_enabled(*sptep))
kvm_set_pfn_dirty(spte_to_pfn(*sptep));
return was_writable;
}
/*
* Gets the GFN ready for another round of dirty logging by clearing the
* - D bit on ad-enabled SPTEs, and
* - W bit on ad-disabled SPTEs.
* Returns true iff any D or W bits were cleared.
*/
static bool __rmap_clear_dirty(struct kvm *kvm, struct kvm_rmap_head *rmap_head)
{
u64 *sptep;
struct rmap_iterator iter;
bool flush = false;
for_each_rmap_spte(rmap_head, &iter, sptep)
if (spte_ad_need_write_protect(*sptep))
flush |= spte_wrprot_for_clear_dirty(sptep);
else
flush |= spte_clear_dirty(sptep);
return flush;
}
static bool spte_set_dirty(u64 *sptep)
{
u64 spte = *sptep;
rmap_printk("rmap_set_dirty: spte %p %llx\n", sptep, *sptep);
/*
* Similar to the !kvm_x86_ops.slot_disable_log_dirty case,
* do not bother adding back write access to pages marked
* SPTE_AD_WRPROT_ONLY_MASK.
*/
spte |= shadow_dirty_mask;
return mmu_spte_update(sptep, spte);
}
static bool __rmap_set_dirty(struct kvm *kvm, struct kvm_rmap_head *rmap_head)
{
u64 *sptep;
struct rmap_iterator iter;
bool flush = false;
for_each_rmap_spte(rmap_head, &iter, sptep)
if (spte_ad_enabled(*sptep))
flush |= spte_set_dirty(sptep);
return flush;
}
/**
* kvm_mmu_write_protect_pt_masked - write protect selected PT level pages
* @kvm: kvm instance
* @slot: slot to protect
* @gfn_offset: start of the BITS_PER_LONG pages we care about
* @mask: indicates which pages we should protect
*
* Used when we do not need to care about huge page mappings: e.g. during dirty
* logging we do not have any such mappings.
*/
static void kvm_mmu_write_protect_pt_masked(struct kvm *kvm,
struct kvm_memory_slot *slot,
gfn_t gfn_offset, unsigned long mask)
{
struct kvm_rmap_head *rmap_head;
while (mask) {
rmap_head = __gfn_to_rmap(slot->base_gfn + gfn_offset + __ffs(mask),
PG_LEVEL_4K, slot);
__rmap_write_protect(kvm, rmap_head, false);
/* clear the first set bit */
mask &= mask - 1;
}
}
/**
* kvm_mmu_clear_dirty_pt_masked - clear MMU D-bit for PT level pages, or write
* protect the page if the D-bit isn't supported.
* @kvm: kvm instance
* @slot: slot to clear D-bit
* @gfn_offset: start of the BITS_PER_LONG pages we care about
* @mask: indicates which pages we should clear D-bit
*
* Used for PML to re-log the dirty GPAs after userspace querying dirty_bitmap.
*/
void kvm_mmu_clear_dirty_pt_masked(struct kvm *kvm,
struct kvm_memory_slot *slot,
gfn_t gfn_offset, unsigned long mask)
{
struct kvm_rmap_head *rmap_head;
while (mask) {
rmap_head = __gfn_to_rmap(slot->base_gfn + gfn_offset + __ffs(mask),
PG_LEVEL_4K, slot);
__rmap_clear_dirty(kvm, rmap_head);
/* clear the first set bit */
mask &= mask - 1;
}
}
EXPORT_SYMBOL_GPL(kvm_mmu_clear_dirty_pt_masked);
/**
* kvm_arch_mmu_enable_log_dirty_pt_masked - enable dirty logging for selected
* PT level pages.
*
* It calls kvm_mmu_write_protect_pt_masked to write protect selected pages to
* enable dirty logging for them.
*
* Used when we do not need to care about huge page mappings: e.g. during dirty
* logging we do not have any such mappings.
*/
void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm,
struct kvm_memory_slot *slot,
gfn_t gfn_offset, unsigned long mask)
{
if (kvm_x86_ops.enable_log_dirty_pt_masked)
kvm_x86_ops.enable_log_dirty_pt_masked(kvm, slot, gfn_offset,
mask);
else
kvm_mmu_write_protect_pt_masked(kvm, slot, gfn_offset, mask);
}
bool kvm_mmu_slot_gfn_write_protect(struct kvm *kvm,
struct kvm_memory_slot *slot, u64 gfn)
{
struct kvm_rmap_head *rmap_head;
int i;
bool write_protected = false;
for (i = PG_LEVEL_4K; i <= KVM_MAX_HUGEPAGE_LEVEL; ++i) {
rmap_head = __gfn_to_rmap(gfn, i, slot);
write_protected |= __rmap_write_protect(kvm, rmap_head, true);
}
return write_protected;
}
static bool rmap_write_protect(struct kvm_vcpu *vcpu, u64 gfn)
{
struct kvm_memory_slot *slot;
slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
return kvm_mmu_slot_gfn_write_protect(vcpu->kvm, slot, gfn);
}
static bool kvm_zap_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head)
{
u64 *sptep;
struct rmap_iterator iter;
bool flush = false;
while ((sptep = rmap_get_first(rmap_head, &iter))) {
rmap_printk("%s: spte %p %llx.\n", __func__, sptep, *sptep);
pte_list_remove(rmap_head, sptep);
flush = true;
}
return flush;
}
static int kvm_unmap_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
struct kvm_memory_slot *slot, gfn_t gfn, int level,
unsigned long data)
{
return kvm_zap_rmapp(kvm, rmap_head);
}
static int kvm_set_pte_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
struct kvm_memory_slot *slot, gfn_t gfn, int level,
unsigned long data)
{
u64 *sptep;
struct rmap_iterator iter;
int need_flush = 0;
u64 new_spte;
pte_t *ptep = (pte_t *)data;
kvm: rename pfn_t to kvm_pfn_t To date, we have implemented two I/O usage models for persistent memory, PMEM (a persistent "ram disk") and DAX (mmap persistent memory into userspace). This series adds a third, DAX-GUP, that allows DAX mappings to be the target of direct-i/o. It allows userspace to coordinate DMA/RDMA from/to persistent memory. The implementation leverages the ZONE_DEVICE mm-zone that went into 4.3-rc1 (also discussed at kernel summit) to flag pages that are owned and dynamically mapped by a device driver. The pmem driver, after mapping a persistent memory range into the system memmap via devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus page-backed pmem-pfns via flags in the new pfn_t type. The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the resulting pte(s) inserted into the process page tables with a new _PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys off _PAGE_DEVMAP to pin the device hosting the page range active. Finally, get_page() and put_page() are modified to take references against the device driver established page mapping. Finally, this need for "struct page" for persistent memory requires memory capacity to store the memmap array. Given the memmap array for a large pool of persistent may exhaust available DRAM introduce a mechanism to allocate the memmap from persistent memory. The new "struct vmem_altmap *" parameter to devm_memremap_pages() enables arch_add_memory() to use reserved pmem capacity rather than the page allocator. This patch (of 18): The core has developed a need for a "pfn_t" type [1]. Move the existing pfn_t in KVM to kvm_pfn_t [2]. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:56:11 +08:00
kvm_pfn_t new_pfn;
WARN_ON(pte_huge(*ptep));
new_pfn = pte_pfn(*ptep);
restart:
for_each_rmap_spte(rmap_head, &iter, sptep) {
rmap_printk("kvm_set_pte_rmapp: spte %p %llx gfn %llx (%d)\n",
sptep, *sptep, gfn, level);
need_flush = 1;
if (pte_write(*ptep)) {
pte_list_remove(rmap_head, sptep);
goto restart;
} else {
new_spte = kvm_mmu_changed_pte_notifier_make_spte(
*sptep, new_pfn);
mmu_spte_clear_track_bits(sptep);
mmu_spte_set(sptep, new_spte);
}
}
if (need_flush && kvm_available_flush_tlb_with_range()) {
kvm_flush_remote_tlbs_with_address(kvm, gfn, 1);
return 0;
}
return need_flush;
}
struct slot_rmap_walk_iterator {
/* input fields. */
struct kvm_memory_slot *slot;
gfn_t start_gfn;
gfn_t end_gfn;
int start_level;
int end_level;
/* output fields. */
gfn_t gfn;
struct kvm_rmap_head *rmap;
int level;
/* private field. */
struct kvm_rmap_head *end_rmap;
};
static void
rmap_walk_init_level(struct slot_rmap_walk_iterator *iterator, int level)
{
iterator->level = level;
iterator->gfn = iterator->start_gfn;
iterator->rmap = __gfn_to_rmap(iterator->gfn, level, iterator->slot);
iterator->end_rmap = __gfn_to_rmap(iterator->end_gfn, level,
iterator->slot);
}
static void
slot_rmap_walk_init(struct slot_rmap_walk_iterator *iterator,
struct kvm_memory_slot *slot, int start_level,
int end_level, gfn_t start_gfn, gfn_t end_gfn)
{
iterator->slot = slot;
iterator->start_level = start_level;
iterator->end_level = end_level;
iterator->start_gfn = start_gfn;
iterator->end_gfn = end_gfn;
rmap_walk_init_level(iterator, iterator->start_level);
}
static bool slot_rmap_walk_okay(struct slot_rmap_walk_iterator *iterator)
{
return !!iterator->rmap;
}
static void slot_rmap_walk_next(struct slot_rmap_walk_iterator *iterator)
{
if (++iterator->rmap <= iterator->end_rmap) {
iterator->gfn += (1UL << KVM_HPAGE_GFN_SHIFT(iterator->level));
return;
}
if (++iterator->level > iterator->end_level) {
iterator->rmap = NULL;
return;
}
rmap_walk_init_level(iterator, iterator->level);
}
#define for_each_slot_rmap_range(_slot_, _start_level_, _end_level_, \
_start_gfn, _end_gfn, _iter_) \
for (slot_rmap_walk_init(_iter_, _slot_, _start_level_, \
_end_level_, _start_gfn, _end_gfn); \
slot_rmap_walk_okay(_iter_); \
slot_rmap_walk_next(_iter_))
static int kvm_handle_hva_range(struct kvm *kvm,
unsigned long start,
unsigned long end,
unsigned long data,
int (*handler)(struct kvm *kvm,
struct kvm_rmap_head *rmap_head,
struct kvm_memory_slot *slot,
gfn_t gfn,
int level,
unsigned long data))
{
struct kvm_memslots *slots;
struct kvm_memory_slot *memslot;
struct slot_rmap_walk_iterator iterator;
int ret = 0;
int i;
for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
slots = __kvm_memslots(kvm, i);
kvm_for_each_memslot(memslot, slots) {
unsigned long hva_start, hva_end;
gfn_t gfn_start, gfn_end;
hva_start = max(start, memslot->userspace_addr);
hva_end = min(end, memslot->userspace_addr +
(memslot->npages << PAGE_SHIFT));
if (hva_start >= hva_end)
continue;
/*
* {gfn(page) | page intersects with [hva_start, hva_end)} =
* {gfn_start, gfn_start+1, ..., gfn_end-1}.
*/
gfn_start = hva_to_gfn_memslot(hva_start, memslot);
gfn_end = hva_to_gfn_memslot(hva_end + PAGE_SIZE - 1, memslot);
for_each_slot_rmap_range(memslot, PG_LEVEL_4K,
KVM_MAX_HUGEPAGE_LEVEL,
gfn_start, gfn_end - 1,
&iterator)
ret |= handler(kvm, iterator.rmap, memslot,
iterator.gfn, iterator.level, data);
}
}
return ret;
}
static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
unsigned long data,
int (*handler)(struct kvm *kvm,
struct kvm_rmap_head *rmap_head,
struct kvm_memory_slot *slot,
gfn_t gfn, int level,
unsigned long data))
{
return kvm_handle_hva_range(kvm, hva, hva + 1, data, handler);
}
int kvm_unmap_hva_range(struct kvm *kvm, unsigned long start, unsigned long end,
unsigned flags)
{
return kvm_handle_hva_range(kvm, start, end, 0, kvm_unmap_rmapp);
}
int kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte)
{
return kvm_handle_hva(kvm, hva, (unsigned long)&pte, kvm_set_pte_rmapp);
}
static int kvm_age_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
struct kvm_memory_slot *slot, gfn_t gfn, int level,
unsigned long data)
{
u64 *sptep;
treewide: Remove uninitialized_var() usage Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-04 04:09:38 +08:00
struct rmap_iterator iter;
int young = 0;
for_each_rmap_spte(rmap_head, &iter, sptep)
young |= mmu_spte_age(sptep);
trace_kvm_age_page(gfn, level, slot, young);
return young;
}
static int kvm_test_age_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
struct kvm_memory_slot *slot, gfn_t gfn,
int level, unsigned long data)
{
u64 *sptep;
struct rmap_iterator iter;
for_each_rmap_spte(rmap_head, &iter, sptep)
if (is_accessed_spte(*sptep))
return 1;
return 0;
}
#define RMAP_RECYCLE_THRESHOLD 1000
static void rmap_recycle(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
{
struct kvm_rmap_head *rmap_head;
struct kvm_mmu_page *sp;
sp = sptep_to_sp(spte);
rmap_head = gfn_to_rmap(vcpu->kvm, gfn, sp);
kvm_unmap_rmapp(vcpu->kvm, rmap_head, NULL, gfn, sp->role.level, 0);
kvm_flush_remote_tlbs_with_address(vcpu->kvm, sp->gfn,
KVM_PAGES_PER_HPAGE(sp->role.level));
}
int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end)
{
return kvm_handle_hva_range(kvm, start, end, 0, kvm_age_rmapp);
}
int kvm_test_age_hva(struct kvm *kvm, unsigned long hva)
{
return kvm_handle_hva(kvm, hva, 0, kvm_test_age_rmapp);
}
#ifdef MMU_DEBUG
static int is_empty_shadow_page(u64 *spt)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
u64 *pos;
u64 *end;
for (pos = spt, end = pos + PAGE_SIZE / sizeof(u64); pos != end; pos++)
if (is_shadow_present_pte(*pos)) {
printk(KERN_ERR "%s: %p %llx\n", __func__,
pos, *pos);
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
return 0;
}
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
return 1;
}
#endif
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
/*
* This value is the sum of all of the kvm instances's
* kvm->arch.n_used_mmu_pages values. We need a global,
* aggregate version in order to make the slab shrinker
* faster
*/
static inline void kvm_mod_used_mmu_pages(struct kvm *kvm, unsigned long nr)
{
kvm->arch.n_used_mmu_pages += nr;
percpu_counter_add(&kvm_total_used_mmu_pages, nr);
}
static void kvm_mmu_free_page(struct kvm_mmu_page *sp)
{
MMU_WARN_ON(!is_empty_shadow_page(sp->spt));
hlist_del(&sp->hash_link);
list_del(&sp->link);
free_page((unsigned long)sp->spt);
if (!sp->role.direct)
free_page((unsigned long)sp->gfns);
kmem_cache_free(mmu_page_header_cache, sp);
}
static unsigned kvm_page_table_hashfn(gfn_t gfn)
{
kvm: x86: reduce collisions in mmu_page_hash When using two-dimensional paging, the mmu_page_hash (which provides lookups for existing kvm_mmu_page structs), becomes imbalanced; with too many collisions in buckets 0 and 512. This has been seen to cause mmu_lock to be held for multiple milliseconds in kvm_mmu_get_page on VMs with a large amount of RAM mapped with 4K pages. The current hash function uses the lower 10 bits of gfn to index into mmu_page_hash. When doing shadow paging, gfn is the address of the guest page table being shadow. These tables are 4K-aligned, which makes the low bits of gfn a good hash. However, with two-dimensional paging, no guest page tables are being shadowed, so gfn is the base address that is mapped by the table. Thus page tables (level=1) have a 2MB aligned gfn, page directories (level=2) have a 1GB aligned gfn, etc. This means hashes will only differ in their 10th bit. hash_64() provides a better hash. For example, on a VM with ~200G (99458 direct=1 kvm_mmu_page structs): hash max_mmu_page_hash_collisions -------------------------------------------- low 10 bits 49847 hash_64 105 perfect 97 While we're changing the hash, increase the table size by 4x to better support large VMs (further reduces number of collisions in 200G VM to 29). Note that hash_64() does not provide a good distribution prior to commit ef703f49a6c5 ("Eliminate bad hash multipliers from hash_32() and hash_64()"). Signed-off-by: David Matlack <dmatlack@google.com> Change-Id: I5aa6b13c834722813c6cca46b8b1ed6f53368ade Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-20 05:58:25 +08:00
return hash_64(gfn, KVM_MMU_HASH_SHIFT);
}
static void mmu_page_add_parent_pte(struct kvm_vcpu *vcpu,
struct kvm_mmu_page *sp, u64 *parent_pte)
{
if (!parent_pte)
return;
pte_list_add(vcpu, parent_pte, &sp->parent_ptes);
}
static void mmu_page_remove_parent_pte(struct kvm_mmu_page *sp,
u64 *parent_pte)
{
__pte_list_remove(parent_pte, &sp->parent_ptes);
}
static void drop_parent_pte(struct kvm_mmu_page *sp,
u64 *parent_pte)
{
mmu_page_remove_parent_pte(sp, parent_pte);
mmu_spte_clear_no_track(parent_pte);
}
static struct kvm_mmu_page *kvm_mmu_alloc_page(struct kvm_vcpu *vcpu, int direct)
{
struct kvm_mmu_page *sp;
sp = kvm_mmu_memory_cache_alloc(&vcpu->arch.mmu_page_header_cache);
sp->spt = kvm_mmu_memory_cache_alloc(&vcpu->arch.mmu_shadow_page_cache);
if (!direct)
sp->gfns = kvm_mmu_memory_cache_alloc(&vcpu->arch.mmu_gfn_array_cache);
set_page_private(virt_to_page(sp->spt), (unsigned long)sp);
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
/*
* active_mmu_pages must be a FIFO list, as kvm_zap_obsolete_pages()
* depends on valid pages being added to the head of the list. See
* comments in kvm_zap_obsolete_pages().
*/
sp->mmu_valid_gen = vcpu->kvm->arch.mmu_valid_gen;
list_add(&sp->link, &vcpu->kvm->arch.active_mmu_pages);
kvm_mod_used_mmu_pages(vcpu->kvm, +1);
return sp;
}
static void mark_unsync(u64 *spte);
static void kvm_mmu_mark_parents_unsync(struct kvm_mmu_page *sp)
{
u64 *sptep;
struct rmap_iterator iter;
for_each_rmap_spte(&sp->parent_ptes, &iter, sptep) {
mark_unsync(sptep);
}
}
static void mark_unsync(u64 *spte)
{
struct kvm_mmu_page *sp;
unsigned int index;
sp = sptep_to_sp(spte);
index = spte - sp->spt;
if (__test_and_set_bit(index, sp->unsync_child_bitmap))
return;
if (sp->unsync_children++)
return;
kvm_mmu_mark_parents_unsync(sp);
}
static int nonpaging_sync_page(struct kvm_vcpu *vcpu,
struct kvm_mmu_page *sp)
{
return 0;
}
static void nonpaging_update_pte(struct kvm_vcpu *vcpu,
struct kvm_mmu_page *sp, u64 *spte,
const void *pte)
{
WARN_ON(1);
}
#define KVM_PAGE_ARRAY_NR 16
struct kvm_mmu_pages {
struct mmu_page_and_offset {
struct kvm_mmu_page *sp;
unsigned int idx;
} page[KVM_PAGE_ARRAY_NR];
unsigned int nr;
};
static int mmu_pages_add(struct kvm_mmu_pages *pvec, struct kvm_mmu_page *sp,
int idx)
{
int i;
if (sp->unsync)
for (i=0; i < pvec->nr; i++)
if (pvec->page[i].sp == sp)
return 0;
pvec->page[pvec->nr].sp = sp;
pvec->page[pvec->nr].idx = idx;
pvec->nr++;
return (pvec->nr == KVM_PAGE_ARRAY_NR);
}
static inline void clear_unsync_child_bit(struct kvm_mmu_page *sp, int idx)
{
--sp->unsync_children;
WARN_ON((int)sp->unsync_children < 0);
__clear_bit(idx, sp->unsync_child_bitmap);
}
static int __mmu_unsync_walk(struct kvm_mmu_page *sp,
struct kvm_mmu_pages *pvec)
{
int i, ret, nr_unsync_leaf = 0;
for_each_set_bit(i, sp->unsync_child_bitmap, 512) {
struct kvm_mmu_page *child;
u64 ent = sp->spt[i];
if (!is_shadow_present_pte(ent) || is_large_pte(ent)) {
clear_unsync_child_bit(sp, i);
continue;
}
child = to_shadow_page(ent & PT64_BASE_ADDR_MASK);
if (child->unsync_children) {
if (mmu_pages_add(pvec, child, i))
return -ENOSPC;
ret = __mmu_unsync_walk(child, pvec);
if (!ret) {
clear_unsync_child_bit(sp, i);
continue;
} else if (ret > 0) {
nr_unsync_leaf += ret;
} else
return ret;
} else if (child->unsync) {
nr_unsync_leaf++;
if (mmu_pages_add(pvec, child, i))
return -ENOSPC;
} else
clear_unsync_child_bit(sp, i);
}
return nr_unsync_leaf;
}
#define INVALID_INDEX (-1)
static int mmu_unsync_walk(struct kvm_mmu_page *sp,
struct kvm_mmu_pages *pvec)
{
pvec->nr = 0;
if (!sp->unsync_children)
return 0;
mmu_pages_add(pvec, sp, INVALID_INDEX);
return __mmu_unsync_walk(sp, pvec);
}
static void kvm_unlink_unsync_page(struct kvm *kvm, struct kvm_mmu_page *sp)
{
WARN_ON(!sp->unsync);
trace_kvm_mmu_sync_page(sp);
sp->unsync = 0;
--kvm->stat.mmu_unsync;
}
KVM: x86/mmu: Differentiate between nr zapped and list unstable The return value of kvm_mmu_prepare_zap_page() has evolved to become overloaded to convey two separate pieces of information. 1) was at least one page zapped and 2) has the list of MMU pages become unstable. In it's original incarnation (as kvm_mmu_zap_page()), there was no return value at all. Commit 0738541396be ("KVM: MMU: awareness of new kvm_mmu_zap_page behaviour") added a return value in preparation for commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"). Although the return value was of type 'int', it was actually used as a boolean to indicate whether or not active_mmu_pages may have become unstable due to zapping children. Walking a list with list_for_each_entry_safe() only protects against deleting/moving the current entry, i.e. zapping a child page would break iteration due to modifying any number of entries. Later, commit 60c8aec6e2c9 ("KVM: MMU: use page array in unsync walk") modified mmu_zap_unsync_children() to return an approximation of the number of children zapped. This was not intentional, it was simply a side effect of how the code was written. The unintented side affect was then morphed into an actual feature by commit 77662e0028c7 ("KVM: MMU: fix kvm_mmu_zap_page() and its calling path"), which modified kvm_mmu_change_mmu_pages() to use the number of zapped pages when determining the number of MMU pages in use by the VM. Finally, commit 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") added the initial page to the return value to make its behavior more consistent with what most users would expect. Incorporating the initial parent page in the return value of kvm_mmu_zap_page() breaks the original usage of restarting a list walk on a non-zero return value to handle a potentially unstable list, i.e. walks will unnecessarily restart when any page is zapped. Fix this by restoring the original behavior of kvm_mmu_zap_page(), i.e. return a boolean to indicate that the list may be unstable and move the number of zapped children to a dedicated parameter. Since the majority of callers to kvm_mmu_prepare_zap_page() don't care about either return value, preserve the current definition of kvm_mmu_prepare_zap_page() by making it a wrapper of a new helper, __kvm_mmu_prepare_zap_page(). This avoids having to update every call site and also provides cleaner code for functions that only care about the number of pages zapped. Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-06 05:01:35 +08:00
static bool kvm_mmu_prepare_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp,
struct list_head *invalid_list);
static void kvm_mmu_commit_zap_page(struct kvm *kvm,
struct list_head *invalid_list);
#define for_each_valid_sp(_kvm, _sp, _list) \
hlist_for_each_entry(_sp, _list, hash_link) \
if (is_obsolete_sp((_kvm), (_sp))) { \
} else
#define for_each_gfn_indirect_valid_sp(_kvm, _sp, _gfn) \
for_each_valid_sp(_kvm, _sp, \
&(_kvm)->arch.mmu_page_hash[kvm_page_table_hashfn(_gfn)]) \
if ((_sp)->gfn != (_gfn) || (_sp)->role.direct) {} else
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-08 07:27:44 +08:00
static inline bool is_ept_sp(struct kvm_mmu_page *sp)
{
return sp->role.cr0_wp && sp->role.smap_andnot_wp;
}
/* @sp->gfn should be write-protected at the call site */
static bool __kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
struct list_head *invalid_list)
{
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-08 07:27:44 +08:00
if ((!is_ept_sp(sp) && sp->role.gpte_is_8_bytes != !!is_pae(vcpu)) ||
vcpu->arch.mmu->sync_page(vcpu, sp) == 0) {
kvm_mmu_prepare_zap_page(vcpu->kvm, sp, invalid_list);
return false;
}
return true;
}
static bool kvm_mmu_remote_flush_or_zap(struct kvm *kvm,
struct list_head *invalid_list,
bool remote_flush)
{
KVM: x86/mmu: Fix an inverted list_empty() check when zapping sptes A recently introduced helper for handling zap vs. remote flush incorrectly bails early, effectively leaking defunct shadow pages. Manifests as a slab BUG when exiting KVM due to the shadow pages being alive when their associated cache is destroyed. ========================================================================== BUG kvm_mmu_page_header: Objects remaining in kvm_mmu_page_header on ... -------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0x00000000fc436387 objects=26 used=23 fp=0x00000000d023caee ... CPU: 6 PID: 4315 Comm: rmmod Tainted: G B 5.1.0-rc2+ #19 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack+0x46/0x5b slab_err+0xad/0xd0 ? on_each_cpu_mask+0x3c/0x50 ? ksm_migrate_page+0x60/0x60 ? on_each_cpu_cond_mask+0x7c/0xa0 ? __kmalloc+0x1ca/0x1e0 __kmem_cache_shutdown+0x13a/0x310 shutdown_cache+0xf/0x130 kmem_cache_destroy+0x1d5/0x200 kvm_mmu_module_exit+0xa/0x30 [kvm] kvm_arch_exit+0x45/0x60 [kvm] kvm_exit+0x6f/0x80 [kvm] vmx_exit+0x1a/0x50 [kvm_intel] __x64_sys_delete_module+0x153/0x1f0 ? exit_to_usermode_loop+0x88/0xc0 do_syscall_64+0x4f/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a21136345cb6f ("KVM: x86/mmu: Split remote_flush+zap case out of kvm_mmu_flush_or_zap()") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-13 10:55:41 +08:00
if (!remote_flush && list_empty(invalid_list))
return false;
if (!list_empty(invalid_list))
kvm_mmu_commit_zap_page(kvm, invalid_list);
else
kvm_flush_remote_tlbs(kvm);
return true;
}
static void kvm_mmu_flush_or_zap(struct kvm_vcpu *vcpu,
struct list_head *invalid_list,
bool remote_flush, bool local_flush)
{
if (kvm_mmu_remote_flush_or_zap(vcpu->kvm, invalid_list, remote_flush))
return;
if (local_flush)
kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
}
#ifdef CONFIG_KVM_MMU_AUDIT
#include "mmu_audit.c"
#else
static void kvm_mmu_audit(struct kvm_vcpu *vcpu, int point) { }
static void mmu_audit_disable(void) { }
#endif
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
static bool is_obsolete_sp(struct kvm *kvm, struct kvm_mmu_page *sp)
{
return sp->role.invalid ||
unlikely(sp->mmu_valid_gen != kvm->arch.mmu_valid_gen);
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
}
static bool kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
struct list_head *invalid_list)
{
kvm_unlink_unsync_page(vcpu->kvm, sp);
return __kvm_sync_page(vcpu, sp, invalid_list);
}
/* @gfn should be write-protected at the call site */
static bool kvm_sync_pages(struct kvm_vcpu *vcpu, gfn_t gfn,
struct list_head *invalid_list)
{
struct kvm_mmu_page *s;
bool ret = false;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
for_each_gfn_indirect_valid_sp(vcpu->kvm, s, gfn) {
if (!s->unsync)
continue;
WARN_ON(s->role.level != PG_LEVEL_4K);
ret |= kvm_sync_page(vcpu, s, invalid_list);
}
return ret;
}
struct mmu_page_path {
struct kvm_mmu_page *parent[PT64_ROOT_MAX_LEVEL];
unsigned int idx[PT64_ROOT_MAX_LEVEL];
};
#define for_each_sp(pvec, sp, parents, i) \
for (i = mmu_pages_first(&pvec, &parents); \
i < pvec.nr && ({ sp = pvec.page[i].sp; 1;}); \
i = mmu_pages_next(&pvec, &parents, i))
static int mmu_pages_next(struct kvm_mmu_pages *pvec,
struct mmu_page_path *parents,
int i)
{
int n;
for (n = i+1; n < pvec->nr; n++) {
struct kvm_mmu_page *sp = pvec->page[n].sp;
unsigned idx = pvec->page[n].idx;
int level = sp->role.level;
parents->idx[level-1] = idx;
if (level == PG_LEVEL_4K)
break;
parents->parent[level-2] = sp;
}
return n;
}
static int mmu_pages_first(struct kvm_mmu_pages *pvec,
struct mmu_page_path *parents)
{
struct kvm_mmu_page *sp;
int level;
if (pvec->nr == 0)
return 0;
WARN_ON(pvec->page[0].idx != INVALID_INDEX);
sp = pvec->page[0].sp;
level = sp->role.level;
WARN_ON(level == PG_LEVEL_4K);
parents->parent[level-2] = sp;
/* Also set up a sentinel. Further entries in pvec are all
* children of sp, so this element is never overwritten.
*/
parents->parent[level-1] = NULL;
return mmu_pages_next(pvec, parents, 0);
}
static void mmu_pages_clear_parents(struct mmu_page_path *parents)
{
struct kvm_mmu_page *sp;
unsigned int level = 0;
do {
unsigned int idx = parents->idx[level];
sp = parents->parent[level];
if (!sp)
return;
WARN_ON(idx == INVALID_INDEX);
clear_unsync_child_bit(sp, idx);
level++;
} while (!sp->unsync_children);
}
static void mmu_sync_children(struct kvm_vcpu *vcpu,
struct kvm_mmu_page *parent)
{
int i;
struct kvm_mmu_page *sp;
struct mmu_page_path parents;
struct kvm_mmu_pages pages;
LIST_HEAD(invalid_list);
bool flush = false;
while (mmu_unsync_walk(parent, &pages)) {
bool protected = false;
for_each_sp(pages, sp, parents, i)
protected |= rmap_write_protect(vcpu, sp->gfn);
if (protected) {
kvm_flush_remote_tlbs(vcpu->kvm);
flush = false;
}
for_each_sp(pages, sp, parents, i) {
flush |= kvm_sync_page(vcpu, sp, &invalid_list);
mmu_pages_clear_parents(&parents);
}
if (need_resched() || spin_needbreak(&vcpu->kvm->mmu_lock)) {
kvm_mmu_flush_or_zap(vcpu, &invalid_list, false, flush);
cond_resched_lock(&vcpu->kvm->mmu_lock);
flush = false;
}
}
kvm_mmu_flush_or_zap(vcpu, &invalid_list, false, flush);
}
static void __clear_sp_write_flooding_count(struct kvm_mmu_page *sp)
{
atomic_set(&sp->write_flooding_count, 0);
}
static void clear_sp_write_flooding_count(u64 *spte)
{
__clear_sp_write_flooding_count(sptep_to_sp(spte));
}
static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
gfn_t gfn,
gva_t gaddr,
unsigned level,
int direct,
unsigned int access)
{
bool direct_mmu = vcpu->arch.mmu->direct_map;
union kvm_mmu_page_role role;
struct hlist_head *sp_list;
unsigned quadrant;
struct kvm_mmu_page *sp;
bool need_sync = false;
bool flush = false;
int collisions = 0;
LIST_HEAD(invalid_list);
role = vcpu->arch.mmu->mmu_role.base;
role.level = level;
role.direct = direct;
if (role.direct)
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-08 07:27:44 +08:00
role.gpte_is_8_bytes = true;
role.access = access;
if (!direct_mmu && vcpu->arch.mmu->root_level <= PT32_ROOT_LEVEL) {
quadrant = gaddr >> (PAGE_SHIFT + (PT64_PT_BITS * level));
quadrant &= (1 << ((PT32_PT_BITS - PT64_PT_BITS) * level)) - 1;
role.quadrant = quadrant;
}
sp_list = &vcpu->kvm->arch.mmu_page_hash[kvm_page_table_hashfn(gfn)];
for_each_valid_sp(vcpu->kvm, sp, sp_list) {
if (sp->gfn != gfn) {
collisions++;
continue;
}
if (!need_sync && sp->unsync)
need_sync = true;
if (sp->role.word != role.word)
continue;
if (direct_mmu)
goto trace_get_page;
if (sp->unsync) {
/* The page is good, but __kvm_sync_page might still end
* up zapping it. If so, break in order to rebuild it.
*/
if (!__kvm_sync_page(vcpu, sp, &invalid_list))
break;
WARN_ON(!list_empty(&invalid_list));
kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
}
if (sp->unsync_children)
kvm_make_request(KVM_REQ_MMU_SYNC, vcpu);
__clear_sp_write_flooding_count(sp);
trace_get_page:
trace_kvm_mmu_get_page(sp, false);
goto out;
}
++vcpu->kvm->stat.mmu_cache_miss;
sp = kvm_mmu_alloc_page(vcpu, direct);
sp->gfn = gfn;
sp->role = role;
hlist_add_head(&sp->hash_link, sp_list);
if (!direct) {
/*
* we should do write protection before syncing pages
* otherwise the content of the synced shadow page may
* be inconsistent with guest page table.
*/
account_shadowed(vcpu->kvm, sp);
if (level == PG_LEVEL_4K && rmap_write_protect(vcpu, gfn))
kvm_flush_remote_tlbs_with_address(vcpu->kvm, gfn, 1);
if (level > PG_LEVEL_4K && need_sync)
flush |= kvm_sync_pages(vcpu, gfn, &invalid_list);
}
trace_kvm_mmu_get_page(sp, true);
kvm_mmu_flush_or_zap(vcpu, &invalid_list, false, flush);
out:
if (collisions > vcpu->kvm->stat.max_mmu_page_hash_collisions)
vcpu->kvm->stat.max_mmu_page_hash_collisions = collisions;
return sp;
}
static void shadow_walk_init_using_root(struct kvm_shadow_walk_iterator *iterator,
struct kvm_vcpu *vcpu, hpa_t root,
u64 addr)
{
iterator->addr = addr;
iterator->shadow_addr = root;
iterator->level = vcpu->arch.mmu->shadow_root_level;
if (iterator->level == PT64_ROOT_4LEVEL &&
vcpu->arch.mmu->root_level < PT64_ROOT_4LEVEL &&
!vcpu->arch.mmu->direct_map)
--iterator->level;
if (iterator->level == PT32E_ROOT_LEVEL) {
/*
* prev_root is currently only used for 64-bit hosts. So only
* the active root_hpa is valid here.
*/
BUG_ON(root != vcpu->arch.mmu->root_hpa);
iterator->shadow_addr
= vcpu->arch.mmu->pae_root[(addr >> 30) & 3];
iterator->shadow_addr &= PT64_BASE_ADDR_MASK;
--iterator->level;
if (!iterator->shadow_addr)
iterator->level = 0;
}
}
static void shadow_walk_init(struct kvm_shadow_walk_iterator *iterator,
struct kvm_vcpu *vcpu, u64 addr)
{
shadow_walk_init_using_root(iterator, vcpu, vcpu->arch.mmu->root_hpa,
addr);
}
static bool shadow_walk_okay(struct kvm_shadow_walk_iterator *iterator)
{
if (iterator->level < PG_LEVEL_4K)
return false;
iterator->index = SHADOW_PT_INDEX(iterator->addr, iterator->level);
iterator->sptep = ((u64 *)__va(iterator->shadow_addr)) + iterator->index;
return true;
}
static void __shadow_walk_next(struct kvm_shadow_walk_iterator *iterator,
u64 spte)
{
if (is_last_spte(spte, iterator->level)) {
iterator->level = 0;
return;
}
iterator->shadow_addr = spte & PT64_BASE_ADDR_MASK;
--iterator->level;
}
static void shadow_walk_next(struct kvm_shadow_walk_iterator *iterator)
{
__shadow_walk_next(iterator, *iterator->sptep);
}
static void link_shadow_page(struct kvm_vcpu *vcpu, u64 *sptep,
struct kvm_mmu_page *sp)
{
u64 spte;
BUILD_BUG_ON(VMX_EPT_WRITABLE_MASK != PT_WRITABLE_MASK);
spte = make_nonleaf_spte(sp->spt, sp_ad_disabled(sp));
mmu_spte_set(sptep, spte);
mmu_page_add_parent_pte(vcpu, sp, sptep);
if (sp->unsync_children || sp->unsync)
mark_unsync(sptep);
}
static void validate_direct_spte(struct kvm_vcpu *vcpu, u64 *sptep,
unsigned direct_access)
{
if (is_shadow_present_pte(*sptep) && !is_large_pte(*sptep)) {
struct kvm_mmu_page *child;
/*
* For the direct sp, if the guest pte's dirty bit
* changed form clean to dirty, it will corrupt the
* sp's access: allow writable in the read-only sp,
* so we should update the spte at this point to get
* a new sp with the correct access.
*/
child = to_shadow_page(*sptep & PT64_BASE_ADDR_MASK);
if (child->role.access == direct_access)
return;
drop_parent_pte(child, sptep);
kvm_flush_remote_tlbs_with_address(vcpu->kvm, child->gfn, 1);
}
}
KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent Recursively zap all to-be-orphaned children, unsynced or otherwise, when zapping a shadow page for a nested TDP MMU. KVM currently only zaps the unsynced child pages, but not the synced ones. This can create problems over time when running many nested guests because it leaves unlinked pages which will not be freed until the page quota is hit. With the default page quota of 20 shadow pages per 1000 guest pages, this looks like a memory leak and can degrade MMU performance. In a recent benchmark, substantial performance degradation was observed: An L1 guest was booted with 64G memory. 2G nested Windows guests were booted, 10 at a time for 20 iterations. (200 total boots) Windows was used in this benchmark because they touch all of their memory on startup. By the end of the benchmark, the nested guests were taking ~10% longer to boot. With this patch there is no degradation in boot time. Without this patch the benchmark ends with hundreds of thousands of stale EPT02 pages cluttering up rmaps and the page hash map. As a result, VM shutdown is also much slower: deleting memslot 0 was observed to take over a minute. With this patch it takes just a few miliseconds. Cc: Peter Shier <pshier@google.com> Signed-off-by: Ben Gardon <bgardon@google.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923221406.16297-3-sean.j.christopherson@intel.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-24 06:14:06 +08:00
/* Returns the number of zapped non-leaf child shadow pages. */
static int mmu_page_zap_pte(struct kvm *kvm, struct kvm_mmu_page *sp,
u64 *spte, struct list_head *invalid_list)
{
u64 pte;
struct kvm_mmu_page *child;
pte = *spte;
if (is_shadow_present_pte(pte)) {
if (is_last_spte(pte, sp->role.level)) {
drop_spte(kvm, spte);
if (is_large_pte(pte))
--kvm->stat.lpages;
} else {
child = to_shadow_page(pte & PT64_BASE_ADDR_MASK);
drop_parent_pte(child, spte);
KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent Recursively zap all to-be-orphaned children, unsynced or otherwise, when zapping a shadow page for a nested TDP MMU. KVM currently only zaps the unsynced child pages, but not the synced ones. This can create problems over time when running many nested guests because it leaves unlinked pages which will not be freed until the page quota is hit. With the default page quota of 20 shadow pages per 1000 guest pages, this looks like a memory leak and can degrade MMU performance. In a recent benchmark, substantial performance degradation was observed: An L1 guest was booted with 64G memory. 2G nested Windows guests were booted, 10 at a time for 20 iterations. (200 total boots) Windows was used in this benchmark because they touch all of their memory on startup. By the end of the benchmark, the nested guests were taking ~10% longer to boot. With this patch there is no degradation in boot time. Without this patch the benchmark ends with hundreds of thousands of stale EPT02 pages cluttering up rmaps and the page hash map. As a result, VM shutdown is also much slower: deleting memslot 0 was observed to take over a minute. With this patch it takes just a few miliseconds. Cc: Peter Shier <pshier@google.com> Signed-off-by: Ben Gardon <bgardon@google.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923221406.16297-3-sean.j.christopherson@intel.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-24 06:14:06 +08:00
/*
* Recursively zap nested TDP SPs, parentless SPs are
* unlikely to be used again in the near future. This
* avoids retaining a large number of stale nested SPs.
*/
if (tdp_enabled && invalid_list &&
child->role.guest_mode && !child->parent_ptes.val)
return kvm_mmu_prepare_zap_page(kvm, child,
invalid_list);
}
} else if (is_mmio_spte(pte)) {
mmu_spte_clear_no_track(spte);
}
KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent Recursively zap all to-be-orphaned children, unsynced or otherwise, when zapping a shadow page for a nested TDP MMU. KVM currently only zaps the unsynced child pages, but not the synced ones. This can create problems over time when running many nested guests because it leaves unlinked pages which will not be freed until the page quota is hit. With the default page quota of 20 shadow pages per 1000 guest pages, this looks like a memory leak and can degrade MMU performance. In a recent benchmark, substantial performance degradation was observed: An L1 guest was booted with 64G memory. 2G nested Windows guests were booted, 10 at a time for 20 iterations. (200 total boots) Windows was used in this benchmark because they touch all of their memory on startup. By the end of the benchmark, the nested guests were taking ~10% longer to boot. With this patch there is no degradation in boot time. Without this patch the benchmark ends with hundreds of thousands of stale EPT02 pages cluttering up rmaps and the page hash map. As a result, VM shutdown is also much slower: deleting memslot 0 was observed to take over a minute. With this patch it takes just a few miliseconds. Cc: Peter Shier <pshier@google.com> Signed-off-by: Ben Gardon <bgardon@google.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923221406.16297-3-sean.j.christopherson@intel.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-24 06:14:06 +08:00
return 0;
}
KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent Recursively zap all to-be-orphaned children, unsynced or otherwise, when zapping a shadow page for a nested TDP MMU. KVM currently only zaps the unsynced child pages, but not the synced ones. This can create problems over time when running many nested guests because it leaves unlinked pages which will not be freed until the page quota is hit. With the default page quota of 20 shadow pages per 1000 guest pages, this looks like a memory leak and can degrade MMU performance. In a recent benchmark, substantial performance degradation was observed: An L1 guest was booted with 64G memory. 2G nested Windows guests were booted, 10 at a time for 20 iterations. (200 total boots) Windows was used in this benchmark because they touch all of their memory on startup. By the end of the benchmark, the nested guests were taking ~10% longer to boot. With this patch there is no degradation in boot time. Without this patch the benchmark ends with hundreds of thousands of stale EPT02 pages cluttering up rmaps and the page hash map. As a result, VM shutdown is also much slower: deleting memslot 0 was observed to take over a minute. With this patch it takes just a few miliseconds. Cc: Peter Shier <pshier@google.com> Signed-off-by: Ben Gardon <bgardon@google.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923221406.16297-3-sean.j.christopherson@intel.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-24 06:14:06 +08:00
static int kvm_mmu_page_unlink_children(struct kvm *kvm,
struct kvm_mmu_page *sp,
struct list_head *invalid_list)
{
KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent Recursively zap all to-be-orphaned children, unsynced or otherwise, when zapping a shadow page for a nested TDP MMU. KVM currently only zaps the unsynced child pages, but not the synced ones. This can create problems over time when running many nested guests because it leaves unlinked pages which will not be freed until the page quota is hit. With the default page quota of 20 shadow pages per 1000 guest pages, this looks like a memory leak and can degrade MMU performance. In a recent benchmark, substantial performance degradation was observed: An L1 guest was booted with 64G memory. 2G nested Windows guests were booted, 10 at a time for 20 iterations. (200 total boots) Windows was used in this benchmark because they touch all of their memory on startup. By the end of the benchmark, the nested guests were taking ~10% longer to boot. With this patch there is no degradation in boot time. Without this patch the benchmark ends with hundreds of thousands of stale EPT02 pages cluttering up rmaps and the page hash map. As a result, VM shutdown is also much slower: deleting memslot 0 was observed to take over a minute. With this patch it takes just a few miliseconds. Cc: Peter Shier <pshier@google.com> Signed-off-by: Ben Gardon <bgardon@google.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923221406.16297-3-sean.j.christopherson@intel.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-24 06:14:06 +08:00
int zapped = 0;
unsigned i;
for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent Recursively zap all to-be-orphaned children, unsynced or otherwise, when zapping a shadow page for a nested TDP MMU. KVM currently only zaps the unsynced child pages, but not the synced ones. This can create problems over time when running many nested guests because it leaves unlinked pages which will not be freed until the page quota is hit. With the default page quota of 20 shadow pages per 1000 guest pages, this looks like a memory leak and can degrade MMU performance. In a recent benchmark, substantial performance degradation was observed: An L1 guest was booted with 64G memory. 2G nested Windows guests were booted, 10 at a time for 20 iterations. (200 total boots) Windows was used in this benchmark because they touch all of their memory on startup. By the end of the benchmark, the nested guests were taking ~10% longer to boot. With this patch there is no degradation in boot time. Without this patch the benchmark ends with hundreds of thousands of stale EPT02 pages cluttering up rmaps and the page hash map. As a result, VM shutdown is also much slower: deleting memslot 0 was observed to take over a minute. With this patch it takes just a few miliseconds. Cc: Peter Shier <pshier@google.com> Signed-off-by: Ben Gardon <bgardon@google.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923221406.16297-3-sean.j.christopherson@intel.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-24 06:14:06 +08:00
zapped += mmu_page_zap_pte(kvm, sp, sp->spt + i, invalid_list);
return zapped;
}
static void kvm_mmu_unlink_parents(struct kvm *kvm, struct kvm_mmu_page *sp)
{
u64 *sptep;
struct rmap_iterator iter;
while ((sptep = rmap_get_first(&sp->parent_ptes, &iter)))
drop_parent_pte(sp, sptep);
}
static int mmu_zap_unsync_children(struct kvm *kvm,
struct kvm_mmu_page *parent,
struct list_head *invalid_list)
{
int i, zapped = 0;
struct mmu_page_path parents;
struct kvm_mmu_pages pages;
if (parent->role.level == PG_LEVEL_4K)
return 0;
while (mmu_unsync_walk(parent, &pages)) {
struct kvm_mmu_page *sp;
for_each_sp(pages, sp, parents, i) {
kvm_mmu_prepare_zap_page(kvm, sp, invalid_list);
mmu_pages_clear_parents(&parents);
zapped++;
}
}
return zapped;
}
KVM: x86/mmu: Differentiate between nr zapped and list unstable The return value of kvm_mmu_prepare_zap_page() has evolved to become overloaded to convey two separate pieces of information. 1) was at least one page zapped and 2) has the list of MMU pages become unstable. In it's original incarnation (as kvm_mmu_zap_page()), there was no return value at all. Commit 0738541396be ("KVM: MMU: awareness of new kvm_mmu_zap_page behaviour") added a return value in preparation for commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"). Although the return value was of type 'int', it was actually used as a boolean to indicate whether or not active_mmu_pages may have become unstable due to zapping children. Walking a list with list_for_each_entry_safe() only protects against deleting/moving the current entry, i.e. zapping a child page would break iteration due to modifying any number of entries. Later, commit 60c8aec6e2c9 ("KVM: MMU: use page array in unsync walk") modified mmu_zap_unsync_children() to return an approximation of the number of children zapped. This was not intentional, it was simply a side effect of how the code was written. The unintented side affect was then morphed into an actual feature by commit 77662e0028c7 ("KVM: MMU: fix kvm_mmu_zap_page() and its calling path"), which modified kvm_mmu_change_mmu_pages() to use the number of zapped pages when determining the number of MMU pages in use by the VM. Finally, commit 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") added the initial page to the return value to make its behavior more consistent with what most users would expect. Incorporating the initial parent page in the return value of kvm_mmu_zap_page() breaks the original usage of restarting a list walk on a non-zero return value to handle a potentially unstable list, i.e. walks will unnecessarily restart when any page is zapped. Fix this by restoring the original behavior of kvm_mmu_zap_page(), i.e. return a boolean to indicate that the list may be unstable and move the number of zapped children to a dedicated parameter. Since the majority of callers to kvm_mmu_prepare_zap_page() don't care about either return value, preserve the current definition of kvm_mmu_prepare_zap_page() by making it a wrapper of a new helper, __kvm_mmu_prepare_zap_page(). This avoids having to update every call site and also provides cleaner code for functions that only care about the number of pages zapped. Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-06 05:01:35 +08:00
static bool __kvm_mmu_prepare_zap_page(struct kvm *kvm,
struct kvm_mmu_page *sp,
struct list_head *invalid_list,
int *nr_zapped)
{
KVM: x86/mmu: Differentiate between nr zapped and list unstable The return value of kvm_mmu_prepare_zap_page() has evolved to become overloaded to convey two separate pieces of information. 1) was at least one page zapped and 2) has the list of MMU pages become unstable. In it's original incarnation (as kvm_mmu_zap_page()), there was no return value at all. Commit 0738541396be ("KVM: MMU: awareness of new kvm_mmu_zap_page behaviour") added a return value in preparation for commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"). Although the return value was of type 'int', it was actually used as a boolean to indicate whether or not active_mmu_pages may have become unstable due to zapping children. Walking a list with list_for_each_entry_safe() only protects against deleting/moving the current entry, i.e. zapping a child page would break iteration due to modifying any number of entries. Later, commit 60c8aec6e2c9 ("KVM: MMU: use page array in unsync walk") modified mmu_zap_unsync_children() to return an approximation of the number of children zapped. This was not intentional, it was simply a side effect of how the code was written. The unintented side affect was then morphed into an actual feature by commit 77662e0028c7 ("KVM: MMU: fix kvm_mmu_zap_page() and its calling path"), which modified kvm_mmu_change_mmu_pages() to use the number of zapped pages when determining the number of MMU pages in use by the VM. Finally, commit 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") added the initial page to the return value to make its behavior more consistent with what most users would expect. Incorporating the initial parent page in the return value of kvm_mmu_zap_page() breaks the original usage of restarting a list walk on a non-zero return value to handle a potentially unstable list, i.e. walks will unnecessarily restart when any page is zapped. Fix this by restoring the original behavior of kvm_mmu_zap_page(), i.e. return a boolean to indicate that the list may be unstable and move the number of zapped children to a dedicated parameter. Since the majority of callers to kvm_mmu_prepare_zap_page() don't care about either return value, preserve the current definition of kvm_mmu_prepare_zap_page() by making it a wrapper of a new helper, __kvm_mmu_prepare_zap_page(). This avoids having to update every call site and also provides cleaner code for functions that only care about the number of pages zapped. Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-06 05:01:35 +08:00
bool list_unstable;
trace_kvm_mmu_prepare_zap_page(sp);
++kvm->stat.mmu_shadow_zapped;
KVM: x86/mmu: Differentiate between nr zapped and list unstable The return value of kvm_mmu_prepare_zap_page() has evolved to become overloaded to convey two separate pieces of information. 1) was at least one page zapped and 2) has the list of MMU pages become unstable. In it's original incarnation (as kvm_mmu_zap_page()), there was no return value at all. Commit 0738541396be ("KVM: MMU: awareness of new kvm_mmu_zap_page behaviour") added a return value in preparation for commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"). Although the return value was of type 'int', it was actually used as a boolean to indicate whether or not active_mmu_pages may have become unstable due to zapping children. Walking a list with list_for_each_entry_safe() only protects against deleting/moving the current entry, i.e. zapping a child page would break iteration due to modifying any number of entries. Later, commit 60c8aec6e2c9 ("KVM: MMU: use page array in unsync walk") modified mmu_zap_unsync_children() to return an approximation of the number of children zapped. This was not intentional, it was simply a side effect of how the code was written. The unintented side affect was then morphed into an actual feature by commit 77662e0028c7 ("KVM: MMU: fix kvm_mmu_zap_page() and its calling path"), which modified kvm_mmu_change_mmu_pages() to use the number of zapped pages when determining the number of MMU pages in use by the VM. Finally, commit 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") added the initial page to the return value to make its behavior more consistent with what most users would expect. Incorporating the initial parent page in the return value of kvm_mmu_zap_page() breaks the original usage of restarting a list walk on a non-zero return value to handle a potentially unstable list, i.e. walks will unnecessarily restart when any page is zapped. Fix this by restoring the original behavior of kvm_mmu_zap_page(), i.e. return a boolean to indicate that the list may be unstable and move the number of zapped children to a dedicated parameter. Since the majority of callers to kvm_mmu_prepare_zap_page() don't care about either return value, preserve the current definition of kvm_mmu_prepare_zap_page() by making it a wrapper of a new helper, __kvm_mmu_prepare_zap_page(). This avoids having to update every call site and also provides cleaner code for functions that only care about the number of pages zapped. Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-06 05:01:35 +08:00
*nr_zapped = mmu_zap_unsync_children(kvm, sp, invalid_list);
KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent Recursively zap all to-be-orphaned children, unsynced or otherwise, when zapping a shadow page for a nested TDP MMU. KVM currently only zaps the unsynced child pages, but not the synced ones. This can create problems over time when running many nested guests because it leaves unlinked pages which will not be freed until the page quota is hit. With the default page quota of 20 shadow pages per 1000 guest pages, this looks like a memory leak and can degrade MMU performance. In a recent benchmark, substantial performance degradation was observed: An L1 guest was booted with 64G memory. 2G nested Windows guests were booted, 10 at a time for 20 iterations. (200 total boots) Windows was used in this benchmark because they touch all of their memory on startup. By the end of the benchmark, the nested guests were taking ~10% longer to boot. With this patch there is no degradation in boot time. Without this patch the benchmark ends with hundreds of thousands of stale EPT02 pages cluttering up rmaps and the page hash map. As a result, VM shutdown is also much slower: deleting memslot 0 was observed to take over a minute. With this patch it takes just a few miliseconds. Cc: Peter Shier <pshier@google.com> Signed-off-by: Ben Gardon <bgardon@google.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923221406.16297-3-sean.j.christopherson@intel.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-24 06:14:06 +08:00
*nr_zapped += kvm_mmu_page_unlink_children(kvm, sp, invalid_list);
kvm_mmu_unlink_parents(kvm, sp);
KVM: x86/mmu: Differentiate between nr zapped and list unstable The return value of kvm_mmu_prepare_zap_page() has evolved to become overloaded to convey two separate pieces of information. 1) was at least one page zapped and 2) has the list of MMU pages become unstable. In it's original incarnation (as kvm_mmu_zap_page()), there was no return value at all. Commit 0738541396be ("KVM: MMU: awareness of new kvm_mmu_zap_page behaviour") added a return value in preparation for commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"). Although the return value was of type 'int', it was actually used as a boolean to indicate whether or not active_mmu_pages may have become unstable due to zapping children. Walking a list with list_for_each_entry_safe() only protects against deleting/moving the current entry, i.e. zapping a child page would break iteration due to modifying any number of entries. Later, commit 60c8aec6e2c9 ("KVM: MMU: use page array in unsync walk") modified mmu_zap_unsync_children() to return an approximation of the number of children zapped. This was not intentional, it was simply a side effect of how the code was written. The unintented side affect was then morphed into an actual feature by commit 77662e0028c7 ("KVM: MMU: fix kvm_mmu_zap_page() and its calling path"), which modified kvm_mmu_change_mmu_pages() to use the number of zapped pages when determining the number of MMU pages in use by the VM. Finally, commit 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") added the initial page to the return value to make its behavior more consistent with what most users would expect. Incorporating the initial parent page in the return value of kvm_mmu_zap_page() breaks the original usage of restarting a list walk on a non-zero return value to handle a potentially unstable list, i.e. walks will unnecessarily restart when any page is zapped. Fix this by restoring the original behavior of kvm_mmu_zap_page(), i.e. return a boolean to indicate that the list may be unstable and move the number of zapped children to a dedicated parameter. Since the majority of callers to kvm_mmu_prepare_zap_page() don't care about either return value, preserve the current definition of kvm_mmu_prepare_zap_page() by making it a wrapper of a new helper, __kvm_mmu_prepare_zap_page(). This avoids having to update every call site and also provides cleaner code for functions that only care about the number of pages zapped. Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-06 05:01:35 +08:00
/* Zapping children means active_mmu_pages has become unstable. */
list_unstable = *nr_zapped;
if (!sp->role.invalid && !sp->role.direct)
unaccount_shadowed(kvm, sp);
if (sp->unsync)
kvm_unlink_unsync_page(kvm, sp);
if (!sp->root_count) {
/* Count self */
KVM: x86/mmu: Differentiate between nr zapped and list unstable The return value of kvm_mmu_prepare_zap_page() has evolved to become overloaded to convey two separate pieces of information. 1) was at least one page zapped and 2) has the list of MMU pages become unstable. In it's original incarnation (as kvm_mmu_zap_page()), there was no return value at all. Commit 0738541396be ("KVM: MMU: awareness of new kvm_mmu_zap_page behaviour") added a return value in preparation for commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"). Although the return value was of type 'int', it was actually used as a boolean to indicate whether or not active_mmu_pages may have become unstable due to zapping children. Walking a list with list_for_each_entry_safe() only protects against deleting/moving the current entry, i.e. zapping a child page would break iteration due to modifying any number of entries. Later, commit 60c8aec6e2c9 ("KVM: MMU: use page array in unsync walk") modified mmu_zap_unsync_children() to return an approximation of the number of children zapped. This was not intentional, it was simply a side effect of how the code was written. The unintented side affect was then morphed into an actual feature by commit 77662e0028c7 ("KVM: MMU: fix kvm_mmu_zap_page() and its calling path"), which modified kvm_mmu_change_mmu_pages() to use the number of zapped pages when determining the number of MMU pages in use by the VM. Finally, commit 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") added the initial page to the return value to make its behavior more consistent with what most users would expect. Incorporating the initial parent page in the return value of kvm_mmu_zap_page() breaks the original usage of restarting a list walk on a non-zero return value to handle a potentially unstable list, i.e. walks will unnecessarily restart when any page is zapped. Fix this by restoring the original behavior of kvm_mmu_zap_page(), i.e. return a boolean to indicate that the list may be unstable and move the number of zapped children to a dedicated parameter. Since the majority of callers to kvm_mmu_prepare_zap_page() don't care about either return value, preserve the current definition of kvm_mmu_prepare_zap_page() by making it a wrapper of a new helper, __kvm_mmu_prepare_zap_page(). This avoids having to update every call site and also provides cleaner code for functions that only care about the number of pages zapped. Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-06 05:01:35 +08:00
(*nr_zapped)++;
/*
* Already invalid pages (previously active roots) are not on
* the active page list. See list_del() in the "else" case of
* !sp->root_count.
*/
if (sp->role.invalid)
list_add(&sp->link, invalid_list);
else
list_move(&sp->link, invalid_list);
kvm_mod_used_mmu_pages(kvm, -1);
} else {
/*
* Remove the active root from the active page list, the root
* will be explicitly freed when the root_count hits zero.
*/
list_del(&sp->link);
/*
* Obsolete pages cannot be used on any vCPUs, see the comment
* in kvm_mmu_zap_all_fast(). Note, is_obsolete_sp() also
* treats invalid shadow pages as being obsolete.
*/
if (!is_obsolete_sp(kvm, sp))
kvm_reload_remote_mmus(kvm);
}
if (sp->lpage_disallowed)
unaccount_huge_nx_page(kvm, sp);
sp->role.invalid = 1;
KVM: x86/mmu: Differentiate between nr zapped and list unstable The return value of kvm_mmu_prepare_zap_page() has evolved to become overloaded to convey two separate pieces of information. 1) was at least one page zapped and 2) has the list of MMU pages become unstable. In it's original incarnation (as kvm_mmu_zap_page()), there was no return value at all. Commit 0738541396be ("KVM: MMU: awareness of new kvm_mmu_zap_page behaviour") added a return value in preparation for commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"). Although the return value was of type 'int', it was actually used as a boolean to indicate whether or not active_mmu_pages may have become unstable due to zapping children. Walking a list with list_for_each_entry_safe() only protects against deleting/moving the current entry, i.e. zapping a child page would break iteration due to modifying any number of entries. Later, commit 60c8aec6e2c9 ("KVM: MMU: use page array in unsync walk") modified mmu_zap_unsync_children() to return an approximation of the number of children zapped. This was not intentional, it was simply a side effect of how the code was written. The unintented side affect was then morphed into an actual feature by commit 77662e0028c7 ("KVM: MMU: fix kvm_mmu_zap_page() and its calling path"), which modified kvm_mmu_change_mmu_pages() to use the number of zapped pages when determining the number of MMU pages in use by the VM. Finally, commit 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") added the initial page to the return value to make its behavior more consistent with what most users would expect. Incorporating the initial parent page in the return value of kvm_mmu_zap_page() breaks the original usage of restarting a list walk on a non-zero return value to handle a potentially unstable list, i.e. walks will unnecessarily restart when any page is zapped. Fix this by restoring the original behavior of kvm_mmu_zap_page(), i.e. return a boolean to indicate that the list may be unstable and move the number of zapped children to a dedicated parameter. Since the majority of callers to kvm_mmu_prepare_zap_page() don't care about either return value, preserve the current definition of kvm_mmu_prepare_zap_page() by making it a wrapper of a new helper, __kvm_mmu_prepare_zap_page(). This avoids having to update every call site and also provides cleaner code for functions that only care about the number of pages zapped. Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-06 05:01:35 +08:00
return list_unstable;
}
static bool kvm_mmu_prepare_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp,
struct list_head *invalid_list)
{
int nr_zapped;
__kvm_mmu_prepare_zap_page(kvm, sp, invalid_list, &nr_zapped);
return nr_zapped;
}
static void kvm_mmu_commit_zap_page(struct kvm *kvm,
struct list_head *invalid_list)
{
struct kvm_mmu_page *sp, *nsp;
if (list_empty(invalid_list))
return;
/*
* We need to make sure everyone sees our modifications to
* the page tables and see changes to vcpu->mode here. The barrier
* in the kvm_flush_remote_tlbs() achieves this. This pairs
* with vcpu_enter_guest and walk_shadow_page_lockless_begin/end.
*
* In addition, kvm_flush_remote_tlbs waits for all vcpus to exit
* guest mode and/or lockless shadow page table walks.
*/
kvm_flush_remote_tlbs(kvm);
list_for_each_entry_safe(sp, nsp, invalid_list, link) {
WARN_ON(!sp->role.invalid || sp->root_count);
kvm_mmu_free_page(sp);
}
}
static unsigned long kvm_mmu_zap_oldest_mmu_pages(struct kvm *kvm,
unsigned long nr_to_zap)
{
unsigned long total_zapped = 0;
struct kvm_mmu_page *sp, *tmp;
LIST_HEAD(invalid_list);
bool unstable;
int nr_zapped;
if (list_empty(&kvm->arch.active_mmu_pages))
return 0;
restart:
list_for_each_entry_safe(sp, tmp, &kvm->arch.active_mmu_pages, link) {
/*
* Don't zap active root pages, the page itself can't be freed
* and zapping it will just force vCPUs to realloc and reload.
*/
if (sp->root_count)
continue;
unstable = __kvm_mmu_prepare_zap_page(kvm, sp, &invalid_list,
&nr_zapped);
total_zapped += nr_zapped;
if (total_zapped >= nr_to_zap)
break;
if (unstable)
goto restart;
}
kvm_mmu_commit_zap_page(kvm, &invalid_list);
kvm->stat.mmu_recycled += total_zapped;
return total_zapped;
}
static inline unsigned long kvm_mmu_available_pages(struct kvm *kvm)
{
if (kvm->arch.n_max_mmu_pages > kvm->arch.n_used_mmu_pages)
return kvm->arch.n_max_mmu_pages -
kvm->arch.n_used_mmu_pages;
return 0;
}
static int make_mmu_pages_available(struct kvm_vcpu *vcpu)
{
unsigned long avail = kvm_mmu_available_pages(vcpu->kvm);
if (likely(avail >= KVM_MIN_FREE_MMU_PAGES))
return 0;
kvm_mmu_zap_oldest_mmu_pages(vcpu->kvm, KVM_REFILL_PAGES - avail);
if (!kvm_mmu_available_pages(vcpu->kvm))
return -ENOSPC;
return 0;
}
/*
* Changing the number of mmu pages allocated to the vm
* Note: if goal_nr_mmu_pages is too small, you will get dead lock
*/
void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned long goal_nr_mmu_pages)
{
spin_lock(&kvm->mmu_lock);
if (kvm->arch.n_used_mmu_pages > goal_nr_mmu_pages) {
kvm_mmu_zap_oldest_mmu_pages(kvm, kvm->arch.n_used_mmu_pages -
goal_nr_mmu_pages);
goal_nr_mmu_pages = kvm->arch.n_used_mmu_pages;
}
kvm->arch.n_max_mmu_pages = goal_nr_mmu_pages;
spin_unlock(&kvm->mmu_lock);
}
int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn)
{
struct kvm_mmu_page *sp;
LIST_HEAD(invalid_list);
int r;
pgprintk("%s: looking for gfn %llx\n", __func__, gfn);
r = 0;
spin_lock(&kvm->mmu_lock);
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
for_each_gfn_indirect_valid_sp(kvm, sp, gfn) {
pgprintk("%s: gfn %llx role %x\n", __func__, gfn,
sp->role.word);
r = 1;
kvm_mmu_prepare_zap_page(kvm, sp, &invalid_list);
}
kvm_mmu_commit_zap_page(kvm, &invalid_list);
spin_unlock(&kvm->mmu_lock);
return r;
}
EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page);
static void kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
{
trace_kvm_mmu_unsync_page(sp);
++vcpu->kvm->stat.mmu_unsync;
sp->unsync = 1;
kvm_mmu_mark_parents_unsync(sp);
}
bool mmu_need_write_protect(struct kvm_vcpu *vcpu, gfn_t gfn,
bool can_unsync)
{
struct kvm_mmu_page *sp;
if (kvm_page_track_is_active(vcpu, gfn, KVM_PAGE_TRACK_WRITE))
return true;
for_each_gfn_indirect_valid_sp(vcpu->kvm, sp, gfn) {
if (!can_unsync)
return true;
if (sp->unsync)
continue;
WARN_ON(sp->role.level != PG_LEVEL_4K);
kvm_unsync_page(vcpu, sp);
}
/*
* We need to ensure that the marking of unsync pages is visible
* before the SPTE is updated to allow writes because
* kvm_mmu_sync_roots() checks the unsync flags without holding
* the MMU lock and so can race with this. If the SPTE was updated
* before the page had been marked as unsync-ed, something like the
* following could happen:
*
* CPU 1 CPU 2
* ---------------------------------------------------------------------
* 1.2 Host updates SPTE
* to be writable
* 2.1 Guest writes a GPTE for GVA X.
* (GPTE being in the guest page table shadowed
* by the SP from CPU 1.)
* This reads SPTE during the page table walk.
* Since SPTE.W is read as 1, there is no
* fault.
*
* 2.2 Guest issues TLB flush.
* That causes a VM Exit.
*
* 2.3 kvm_mmu_sync_pages() reads sp->unsync.
* Since it is false, so it just returns.
*
* 2.4 Guest accesses GVA X.
* Since the mapping in the SP was not updated,
* so the old mapping for GVA X incorrectly
* gets used.
* 1.1 Host marks SP
* as unsync
* (sp->unsync = true)
*
* The write barrier below ensures that 1.1 happens before 1.2 and thus
* the situation in 2.4 does not arise. The implicit barrier in 2.2
* pairs with this write barrier.
*/
smp_wmb();
return false;
}
static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
unsigned int pte_access, int level,
gfn_t gfn, kvm_pfn_t pfn, bool speculative,
bool can_unsync, bool host_writable)
{
u64 spte;
struct kvm_mmu_page *sp;
int ret;
if (set_mmio_spte(vcpu, sptep, gfn, pfn, pte_access))
return 0;
sp = sptep_to_sp(sptep);
ret = make_spte(vcpu, pte_access, level, gfn, pfn, *sptep, speculative,
can_unsync, host_writable, sp_ad_disabled(sp), &spte);
if (spte & PT_WRITABLE_MASK)
kvm_vcpu_mark_page_dirty(vcpu, gfn);
if (*sptep == spte)
ret |= SET_SPTE_SPURIOUS;
else if (mmu_spte_update(sptep, spte))
ret |= SET_SPTE_NEED_REMOTE_TLB_FLUSH;
return ret;
}
static int mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
unsigned int pte_access, bool write_fault, int level,
gfn_t gfn, kvm_pfn_t pfn, bool speculative,
bool host_writable)
{
int was_rmapped = 0;
int rmap_count;
int set_spte_ret;
int ret = RET_PF_FIXED;
bool flush = false;
pgprintk("%s: spte %llx write_fault %d gfn %llx\n", __func__,
*sptep, write_fault, gfn);
if (is_shadow_present_pte(*sptep)) {
/*
* If we overwrite a PTE page pointer with a 2MB PMD, unlink
* the parent of the now unreachable PTE.
*/
if (level > PG_LEVEL_4K && !is_large_pte(*sptep)) {
struct kvm_mmu_page *child;
u64 pte = *sptep;
child = to_shadow_page(pte & PT64_BASE_ADDR_MASK);
drop_parent_pte(child, sptep);
flush = true;
} else if (pfn != spte_to_pfn(*sptep)) {
pgprintk("hfn old %llx new %llx\n",
spte_to_pfn(*sptep), pfn);
drop_spte(vcpu->kvm, sptep);
flush = true;
} else
was_rmapped = 1;
}
set_spte_ret = set_spte(vcpu, sptep, pte_access, level, gfn, pfn,
speculative, true, host_writable);
if (set_spte_ret & SET_SPTE_WRITE_PROTECTED_PT) {
if (write_fault)
ret = RET_PF_EMULATE;
kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
}
if (set_spte_ret & SET_SPTE_NEED_REMOTE_TLB_FLUSH || flush)
kvm_flush_remote_tlbs_with_address(vcpu->kvm, gfn,
KVM_PAGES_PER_HPAGE(level));
if (unlikely(is_mmio_spte(*sptep)))
ret = RET_PF_EMULATE;
/*
* The fault is fully spurious if and only if the new SPTE and old SPTE
* are identical, and emulation is not required.
*/
if ((set_spte_ret & SET_SPTE_SPURIOUS) && ret == RET_PF_FIXED) {
WARN_ON_ONCE(!was_rmapped);
return RET_PF_SPURIOUS;
}
pgprintk("%s: setting spte %llx\n", __func__, *sptep);
trace_kvm_mmu_set_spte(level, gfn, sptep);
if (!was_rmapped && is_large_pte(*sptep))
++vcpu->kvm->stat.lpages;
if (is_shadow_present_pte(*sptep)) {
if (!was_rmapped) {
rmap_count = rmap_add(vcpu, sptep, gfn);
if (rmap_count > RMAP_RECYCLE_THRESHOLD)
rmap_recycle(vcpu, sptep, gfn);
}
}
return ret;
}
kvm: rename pfn_t to kvm_pfn_t To date, we have implemented two I/O usage models for persistent memory, PMEM (a persistent "ram disk") and DAX (mmap persistent memory into userspace). This series adds a third, DAX-GUP, that allows DAX mappings to be the target of direct-i/o. It allows userspace to coordinate DMA/RDMA from/to persistent memory. The implementation leverages the ZONE_DEVICE mm-zone that went into 4.3-rc1 (also discussed at kernel summit) to flag pages that are owned and dynamically mapped by a device driver. The pmem driver, after mapping a persistent memory range into the system memmap via devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus page-backed pmem-pfns via flags in the new pfn_t type. The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the resulting pte(s) inserted into the process page tables with a new _PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys off _PAGE_DEVMAP to pin the device hosting the page range active. Finally, get_page() and put_page() are modified to take references against the device driver established page mapping. Finally, this need for "struct page" for persistent memory requires memory capacity to store the memmap array. Given the memmap array for a large pool of persistent may exhaust available DRAM introduce a mechanism to allocate the memmap from persistent memory. The new "struct vmem_altmap *" parameter to devm_memremap_pages() enables arch_add_memory() to use reserved pmem capacity rather than the page allocator. This patch (of 18): The core has developed a need for a "pfn_t" type [1]. Move the existing pfn_t in KVM to kvm_pfn_t [2]. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:56:11 +08:00
static kvm_pfn_t pte_prefetch_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn,
bool no_dirty_log)
{
struct kvm_memory_slot *slot;
slot = gfn_to_memslot_dirty_bitmap(vcpu, gfn, no_dirty_log);
if (!slot)
return KVM_PFN_ERR_FAULT;
return gfn_to_pfn_memslot_atomic(slot, gfn);
}
static int direct_pte_prefetch_many(struct kvm_vcpu *vcpu,
struct kvm_mmu_page *sp,
u64 *start, u64 *end)
{
struct page *pages[PTE_PREFETCH_NUM];
struct kvm_memory_slot *slot;
unsigned int access = sp->role.access;
int i, ret;
gfn_t gfn;
gfn = kvm_mmu_page_get_gfn(sp, start - sp->spt);
slot = gfn_to_memslot_dirty_bitmap(vcpu, gfn, access & ACC_WRITE_MASK);
if (!slot)
return -1;
ret = gfn_to_page_many_atomic(slot, gfn, pages, end - start);
if (ret <= 0)
return -1;
for (i = 0; i < ret; i++, gfn++, start++) {
mmu_set_spte(vcpu, start, access, false, sp->role.level, gfn,
page_to_pfn(pages[i]), true, true);
put_page(pages[i]);
}
return 0;
}
static void __direct_pte_prefetch(struct kvm_vcpu *vcpu,
struct kvm_mmu_page *sp, u64 *sptep)
{
u64 *spte, *start = NULL;
int i;
WARN_ON(!sp->role.direct);
i = (sptep - sp->spt) & ~(PTE_PREFETCH_NUM - 1);
spte = sp->spt + i;
for (i = 0; i < PTE_PREFETCH_NUM; i++, spte++) {
if (is_shadow_present_pte(*spte) || spte == sptep) {
if (!start)
continue;
if (direct_pte_prefetch_many(vcpu, sp, start, spte) < 0)
break;
start = NULL;
} else if (!start)
start = spte;
}
}
static void direct_pte_prefetch(struct kvm_vcpu *vcpu, u64 *sptep)
{
struct kvm_mmu_page *sp;
sp = sptep_to_sp(sptep);
/*
* Without accessed bits, there's no way to distinguish between
* actually accessed translations and prefetched, so disable pte
* prefetch if accessed bits aren't available.
*/
if (sp_ad_disabled(sp))
return;
if (sp->role.level > PG_LEVEL_4K)
return;
__direct_pte_prefetch(vcpu, sp, sptep);
}
static int host_pfn_mapping_level(struct kvm_vcpu *vcpu, gfn_t gfn,
kvm_pfn_t pfn, struct kvm_memory_slot *slot)
{
unsigned long hva;
pte_t *pte;
int level;
if (!PageCompound(pfn_to_page(pfn)) && !kvm_is_zone_device_pfn(pfn))
return PG_LEVEL_4K;
/*
* Note, using the already-retrieved memslot and __gfn_to_hva_memslot()
* is not solely for performance, it's also necessary to avoid the
* "writable" check in __gfn_to_hva_many(), which will always fail on
* read-only memslots due to gfn_to_hva() assuming writes. Earlier
* page fault steps have already verified the guest isn't writing a
* read-only memslot.
*/
hva = __gfn_to_hva_memslot(slot, gfn);
pte = lookup_address_in_mm(vcpu->kvm->mm, hva, &level);
if (unlikely(!pte))
return PG_LEVEL_4K;
return level;
}
static int kvm_mmu_hugepage_adjust(struct kvm_vcpu *vcpu, gfn_t gfn,
int max_level, kvm_pfn_t *pfnp,
bool huge_page_disallowed, int *req_level)
{
struct kvm_memory_slot *slot;
struct kvm_lpage_info *linfo;
kvm_pfn_t pfn = *pfnp;
kvm_pfn_t mask;
int level;
*req_level = PG_LEVEL_4K;
if (unlikely(max_level == PG_LEVEL_4K))
return PG_LEVEL_4K;
if (is_error_noslot_pfn(pfn) || kvm_is_reserved_pfn(pfn))
return PG_LEVEL_4K;
slot = gfn_to_memslot_dirty_bitmap(vcpu, gfn, true);
if (!slot)
return PG_LEVEL_4K;
max_level = min(max_level, max_huge_page_level);
for ( ; max_level > PG_LEVEL_4K; max_level--) {
linfo = lpage_info_slot(gfn, slot, max_level);
if (!linfo->disallow_lpage)
break;
}
if (max_level == PG_LEVEL_4K)
return PG_LEVEL_4K;
level = host_pfn_mapping_level(vcpu, gfn, pfn, slot);
if (level == PG_LEVEL_4K)
return level;
*req_level = level = min(level, max_level);
/*
* Enforce the iTLB multihit workaround after capturing the requested
* level, which will be used to do precise, accurate accounting.
*/
if (huge_page_disallowed)
return PG_LEVEL_4K;
/*
* mmu_notifier_retry() was successful and mmu_lock is held, so
* the pmd can't be split from under us.
*/
mask = KVM_PAGES_PER_HPAGE(level) - 1;
VM_BUG_ON((gfn & mask) != (pfn & mask));
*pfnp = pfn & ~mask;
return level;
}
static void disallowed_hugepage_adjust(struct kvm_shadow_walk_iterator it,
gfn_t gfn, kvm_pfn_t *pfnp, int *levelp)
{
int level = *levelp;
u64 spte = *it.sptep;
if (it.level == level && level > PG_LEVEL_4K &&
is_shadow_present_pte(spte) &&
!is_large_pte(spte)) {
/*
* A small SPTE exists for this pfn, but FNAME(fetch)
* and __direct_map would like to create a large PTE
* instead: just force them to go down another level,
* patching back for them into pfn the next 9 bits of
* the address.
*/
u64 page_mask = KVM_PAGES_PER_HPAGE(level) - KVM_PAGES_PER_HPAGE(level - 1);
*pfnp |= gfn & page_mask;
(*levelp)--;
}
}
static int __direct_map(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
int map_writable, int max_level, kvm_pfn_t pfn,
bool prefault, bool is_tdp)
{
bool nx_huge_page_workaround_enabled = is_nx_huge_page_enabled();
bool write = error_code & PFERR_WRITE_MASK;
bool exec = error_code & PFERR_FETCH_MASK;
bool huge_page_disallowed = exec && nx_huge_page_workaround_enabled;
struct kvm_shadow_walk_iterator it;
struct kvm_mmu_page *sp;
int level, req_level, ret;
gfn_t gfn = gpa >> PAGE_SHIFT;
gfn_t base_gfn = gfn;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
KVM: x86/mmu: WARN on an invalid root_hpa WARN on the existing invalid root_hpa checks in __direct_map() and FNAME(fetch). The "legitimate" path that invalidated root_hpa in the middle of a page fault is long since gone, i.e. it should no longer be impossible to invalidate in the middle of a page fault[*]. The root_hpa checks were added by two related commits 989c6b34f6a94 ("KVM: MMU: handle invalid root_hpa at __direct_map") 37f6a4e237303 ("KVM: x86: handle invalid root_hpa everywhere") to fix a bug where nested_vmx_vmexit() could be called *in the middle* of a page fault. At the time, vmx_interrupt_allowed(), which was and still is used by kvm_can_do_async_pf() via ->interrupt_allowed(), directly invoked nested_vmx_vmexit() to switch from L2 to L1 to emulate a VM-Exit on a pending interrupt. Emulating the nested VM-Exit resulted in root_hpa being invalidated by kvm_mmu_reset_context() without explicitly terminating the page fault. Now that root_hpa is checked for validity by kvm_mmu_page_fault(), WARN on an invalid root_hpa to detect any flows that reset the MMU while handling a page fault. The broken vmx_interrupt_allowed() behavior has long since been fixed and resetting the MMU during a page fault should not be considered legal behavior. [*] It's actually technically possible in FNAME(page_fault)() because it calls inject_page_fault() when the guest translation is invalid, but in that case the page fault handling is immediately terminated. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:28 +08:00
if (WARN_ON(!VALID_PAGE(vcpu->arch.mmu->root_hpa)))
return RET_PF_RETRY;
level = kvm_mmu_hugepage_adjust(vcpu, gfn, max_level, &pfn,
huge_page_disallowed, &req_level);
trace_kvm_mmu_spte_requested(gpa, level, pfn);
for_each_shadow_entry(vcpu, gpa, it) {
/*
* We cannot overwrite existing page tables with an NX
* large page, as the leaf could be executable.
*/
if (nx_huge_page_workaround_enabled)
disallowed_hugepage_adjust(it, gfn, &pfn, &level);
base_gfn = gfn & ~(KVM_PAGES_PER_HPAGE(it.level) - 1);
if (it.level == level)
break;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
drop_large_spte(vcpu, it.sptep);
if (!is_shadow_present_pte(*it.sptep)) {
sp = kvm_mmu_get_page(vcpu, base_gfn, it.addr,
it.level - 1, true, ACC_ALL);
link_shadow_page(vcpu, it.sptep, sp);
if (is_tdp && huge_page_disallowed &&
req_level >= it.level)
account_huge_nx_page(vcpu->kvm, sp);
}
}
ret = mmu_set_spte(vcpu, it.sptep, ACC_ALL,
write, level, base_gfn, pfn, prefault,
map_writable);
if (ret == RET_PF_SPURIOUS)
return ret;
direct_pte_prefetch(vcpu, it.sptep);
++vcpu->stat.pf_fixed;
return ret;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
static void kvm_send_hwpoison_signal(unsigned long address, struct task_struct *tsk)
{
send_sig_mceerr(BUS_MCEERR_AR, (void __user *)address, PAGE_SHIFT, tsk);
}
kvm: rename pfn_t to kvm_pfn_t To date, we have implemented two I/O usage models for persistent memory, PMEM (a persistent "ram disk") and DAX (mmap persistent memory into userspace). This series adds a third, DAX-GUP, that allows DAX mappings to be the target of direct-i/o. It allows userspace to coordinate DMA/RDMA from/to persistent memory. The implementation leverages the ZONE_DEVICE mm-zone that went into 4.3-rc1 (also discussed at kernel summit) to flag pages that are owned and dynamically mapped by a device driver. The pmem driver, after mapping a persistent memory range into the system memmap via devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus page-backed pmem-pfns via flags in the new pfn_t type. The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the resulting pte(s) inserted into the process page tables with a new _PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys off _PAGE_DEVMAP to pin the device hosting the page range active. Finally, get_page() and put_page() are modified to take references against the device driver established page mapping. Finally, this need for "struct page" for persistent memory requires memory capacity to store the memmap array. Given the memmap array for a large pool of persistent may exhaust available DRAM introduce a mechanism to allocate the memmap from persistent memory. The new "struct vmem_altmap *" parameter to devm_memremap_pages() enables arch_add_memory() to use reserved pmem capacity rather than the page allocator. This patch (of 18): The core has developed a need for a "pfn_t" type [1]. Move the existing pfn_t in KVM to kvm_pfn_t [2]. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:56:11 +08:00
static int kvm_handle_bad_page(struct kvm_vcpu *vcpu, gfn_t gfn, kvm_pfn_t pfn)
{
/*
* Do not cache the mmio info caused by writing the readonly gfn
* into the spte otherwise read access on readonly gfn also can
* caused mmio page fault and treat it as mmio access.
*/
if (pfn == KVM_PFN_ERR_RO_FAULT)
return RET_PF_EMULATE;
if (pfn == KVM_PFN_ERR_HWPOISON) {
kvm_send_hwpoison_signal(kvm_vcpu_gfn_to_hva(vcpu, gfn), current);
return RET_PF_RETRY;
}
Revert "KVM: X86: Fix SMRAM accessing even if VM is shutdown" The bug that led to commit 95e057e25892eaa48cad1e2d637b80d0f1a4fac5 was a benign warning (no adverse affects other than the warning itself) that was detected by syzkaller. Further inspection shows that the WARN_ON in question, in handle_ept_misconfig(), is unnecessary and flawed (this was also briefly discussed in the original patch: https://patchwork.kernel.org/patch/10204649). * The WARN_ON is unnecessary as kvm_mmu_page_fault() will WARN if reserved bits are set in the SPTEs, i.e. it covers the case where an EPT misconfig occurred because of a KVM bug. * The WARN_ON is flawed because it will fire on any system error code that is hit while handling the fault, e.g. -ENOMEM can be returned by mmu_topup_memory_caches() while handling a legitmate MMIO EPT misconfig. The original behavior of returning -EFAULT when userspace munmaps an HVA without first removing the memslot is correct and desirable, i.e. KVM is letting userspace know it has generated a bad address. Returning RET_PF_EMULATE masks the WARN_ON in the EPT misconfig path, but does not fix the underlying bug, i.e. the WARN_ON is bogus. Furthermore, returning RET_PF_EMULATE has the unwanted side effect of causing KVM to attempt to emulate an instruction on any page fault with an invalid HVA translation, e.g. a not-present EPT violation on a VM_PFNMAP VMA whose fault handler failed to insert a PFN. * There is no guarantee that the fault is directly related to the instruction, i.e. the fault could have been triggered by a side effect memory access in the guest, e.g. while vectoring a #DB or writing a tracing record. This could cause KVM to effectively mask the fault if KVM doesn't model the behavior leading to the fault, i.e. emulation could succeed and resume the guest. * If emulation does fail, KVM will return EMULATION_FAILED instead of -EFAULT, which is a red herring as the user will either debug a bogus emulation attempt or scratch their head wondering why we were attempting emulation in the first place. TL;DR: revert to returning -EFAULT and remove the bogus WARN_ON in handle_ept_misconfig in a future patch. This reverts commit 95e057e25892eaa48cad1e2d637b80d0f1a4fac5. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-30 05:48:30 +08:00
return -EFAULT;
}
static bool handle_abnormal_pfn(struct kvm_vcpu *vcpu, gva_t gva, gfn_t gfn,
kvm_pfn_t pfn, unsigned int access,
int *ret_val)
{
/* The pfn is invalid, report the error! */
if (unlikely(is_error_pfn(pfn))) {
*ret_val = kvm_handle_bad_page(vcpu, gfn, pfn);
return true;
}
if (unlikely(is_noslot_pfn(pfn)))
KVM: x86/mmu: Add explicit access mask for MMIO SPTEs When shadow paging is enabled, KVM tracks the allowed access type for MMIO SPTEs so that it can do a permission check on a MMIO GVA cache hit without having to walk the guest's page tables. The tracking is done by retaining the WRITE and USER bits of the access when inserting the MMIO SPTE (read access is implicitly allowed), which allows the MMIO page fault handler to retrieve and cache the WRITE/USER bits from the SPTE. Unfortunately for EPT, the mask used to retain the WRITE/USER bits is hardcoded using the x86 paging versions of the bits. This funkiness happens to work because KVM uses a completely different mask/value for MMIO SPTEs when EPT is enabled, and the EPT mask/value just happens to overlap exactly with the x86 WRITE/USER bits[*]. Explicitly define the access mask for MMIO SPTEs to accurately reflect that EPT does not want to incorporate any access bits into the SPTE, and so that KVM isn't subtly relying on EPT's WX bits always being set in MMIO SPTEs, e.g. attempting to use other bits for experimentation breaks horribly. Note, vcpu_match_mmio_gva() explicits prevents matching GVA==0, and all TDP flows explicit set mmio_gva to 0, i.e. zeroing vcpu->arch.access for EPT has no (known) functional impact. [*] Using WX to generate EPT misconfigurations (equivalent to reserved bit page fault) ensures KVM can employ its MMIO page fault tricks even platforms without reserved address bits. Fixes: ce88decffd17 ("KVM: MMU: mmio page fault support") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-02 04:35:22 +08:00
vcpu_cache_mmio_info(vcpu, gva, gfn,
access & shadow_mmio_access_mask);
return false;
}
static bool page_fault_can_be_fast(u32 error_code)
{
/*
* Do not fix the mmio spte with invalid generation number which
* need to be updated by slow page fault path.
*/
if (unlikely(error_code & PFERR_RSVD_MASK))
return false;
/* See if the page fault is due to an NX violation */
if (unlikely(((error_code & (PFERR_FETCH_MASK | PFERR_PRESENT_MASK))
== (PFERR_FETCH_MASK | PFERR_PRESENT_MASK))))
return false;
/*
* #PF can be fast if:
* 1. The shadow page table entry is not present, which could mean that
* the fault is potentially caused by access tracking (if enabled).
* 2. The shadow page table entry is present and the fault
* is caused by write-protect, that means we just need change the W
* bit of the spte which can be done out of mmu-lock.
*
* However, if access tracking is disabled we know that a non-present
* page must be a genuine page fault where we have to create a new SPTE.
* So, if access tracking is disabled, we return true only for write
* accesses to a present page.
*/
return shadow_acc_track_mask != 0 ||
((error_code & (PFERR_WRITE_MASK | PFERR_PRESENT_MASK))
== (PFERR_WRITE_MASK | PFERR_PRESENT_MASK));
}
/*
* Returns true if the SPTE was fixed successfully. Otherwise,
* someone else modified the SPTE from its original value.
*/
static bool
fast_pf_fix_direct_spte(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
u64 *sptep, u64 old_spte, u64 new_spte)
{
gfn_t gfn;
WARN_ON(!sp->role.direct);
/*
* Theoretically we could also set dirty bit (and flush TLB) here in
* order to eliminate unnecessary PML logging. See comments in
* set_spte. But fast_page_fault is very unlikely to happen with PML
* enabled, so we do not do this. This might result in the same GPA
* to be logged in PML buffer again when the write really happens, and
* eventually to be called by mark_page_dirty twice. But it's also no
* harm. This also avoids the TLB flush needed after setting dirty bit
* so non-PML cases won't be impacted.
*
* Compare with set_spte where instead shadow_dirty_mask is set.
*/
if (cmpxchg64(sptep, old_spte, new_spte) != old_spte)
return false;
if (is_writable_pte(new_spte) && !is_writable_pte(old_spte)) {
/*
* The gfn of direct spte is stable since it is
* calculated by sp->gfn.
*/
gfn = kvm_mmu_page_get_gfn(sp, sptep - sp->spt);
kvm_vcpu_mark_page_dirty(vcpu, gfn);
}
return true;
}
static bool is_access_allowed(u32 fault_err_code, u64 spte)
{
if (fault_err_code & PFERR_FETCH_MASK)
return is_executable_pte(spte);
if (fault_err_code & PFERR_WRITE_MASK)
return is_writable_pte(spte);
/* Fault was on Read access */
return spte & PT_PRESENT_MASK;
}
/*
* Returns one of RET_PF_INVALID, RET_PF_FIXED or RET_PF_SPURIOUS.
*/
static int fast_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
u32 error_code)
{
struct kvm_shadow_walk_iterator iterator;
struct kvm_mmu_page *sp;
int ret = RET_PF_INVALID;
u64 spte = 0ull;
uint retry_count = 0;
if (!page_fault_can_be_fast(error_code))
return ret;
walk_shadow_page_lockless_begin(vcpu);
do {
u64 new_spte;
KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:14 +08:00
for_each_shadow_entry_lockless(vcpu, cr2_or_gpa, iterator, spte)
if (!is_shadow_present_pte(spte))
break;
sp = sptep_to_sp(iterator.sptep);
if (!is_last_spte(spte, sp->role.level))
break;
/*
* Check whether the memory access that caused the fault would
* still cause it if it were to be performed right now. If not,
* then this is a spurious fault caused by TLB lazily flushed,
* or some other CPU has already fixed the PTE after the
* current CPU took the fault.
*
* Need not check the access of upper level table entries since
* they are always ACC_ALL.
*/
if (is_access_allowed(error_code, spte)) {
ret = RET_PF_SPURIOUS;
break;
}
new_spte = spte;
if (is_access_track_spte(spte))
new_spte = restore_acc_track_spte(new_spte);
/*
* Currently, to simplify the code, write-protection can
* be removed in the fast path only if the SPTE was
* write-protected for dirty-logging or access tracking.
*/
if ((error_code & PFERR_WRITE_MASK) &&
spte_can_locklessly_be_made_writable(spte)) {
new_spte |= PT_WRITABLE_MASK;
/*
* Do not fix write-permission on the large spte. Since
* we only dirty the first page into the dirty-bitmap in
* fast_pf_fix_direct_spte(), other pages are missed
* if its slot has dirty logging enabled.
*
* Instead, we let the slow page fault path create a
* normal spte to fix the access.
*
* See the comments in kvm_arch_commit_memory_region().
*/
if (sp->role.level > PG_LEVEL_4K)
break;
}
/* Verify that the fault can be handled in the fast path */
if (new_spte == spte ||
!is_access_allowed(error_code, new_spte))
break;
/*
* Currently, fast page fault only works for direct mapping
* since the gfn is not stable for indirect shadow page. See
* Documentation/virt/kvm/locking.rst to get more detail.
*/
if (fast_pf_fix_direct_spte(vcpu, sp, iterator.sptep, spte,
new_spte)) {
ret = RET_PF_FIXED;
break;
}
if (++retry_count > 4) {
printk_once(KERN_WARNING
"kvm: Fast #PF retrying more than 4 times.\n");
break;
}
} while (true);
KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:14 +08:00
trace_fast_page_fault(vcpu, cr2_or_gpa, error_code, iterator.sptep,
spte, ret);
walk_shadow_page_lockless_end(vcpu);
return ret;
}
static void mmu_free_root_page(struct kvm *kvm, hpa_t *root_hpa,
struct list_head *invalid_list)
{
struct kvm_mmu_page *sp;
if (!VALID_PAGE(*root_hpa))
return;
sp = to_shadow_page(*root_hpa & PT64_BASE_ADDR_MASK);
if (kvm_mmu_put_root(kvm, sp)) {
if (sp->tdp_mmu_page)
kvm_tdp_mmu_free_root(kvm, sp);
else if (sp->role.invalid)
kvm_mmu_prepare_zap_page(kvm, sp, invalid_list);
}
*root_hpa = INVALID_PAGE;
}
/* roots_to_free must be some combination of the KVM_MMU_ROOT_* flags */
void kvm_mmu_free_roots(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
ulong roots_to_free)
{
struct kvm *kvm = vcpu->kvm;
int i;
LIST_HEAD(invalid_list);
bool free_active_root = roots_to_free & KVM_MMU_ROOT_CURRENT;
BUILD_BUG_ON(KVM_MMU_NUM_PREV_ROOTS >= BITS_PER_LONG);
/* Before acquiring the MMU lock, see if we need to do any real work. */
if (!(free_active_root && VALID_PAGE(mmu->root_hpa))) {
for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
if ((roots_to_free & KVM_MMU_ROOT_PREVIOUS(i)) &&
VALID_PAGE(mmu->prev_roots[i].hpa))
break;
if (i == KVM_MMU_NUM_PREV_ROOTS)
return;
}
spin_lock(&kvm->mmu_lock);
for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
if (roots_to_free & KVM_MMU_ROOT_PREVIOUS(i))
mmu_free_root_page(kvm, &mmu->prev_roots[i].hpa,
&invalid_list);
if (free_active_root) {
if (mmu->shadow_root_level >= PT64_ROOT_4LEVEL &&
(mmu->root_level >= PT64_ROOT_4LEVEL || mmu->direct_map)) {
mmu_free_root_page(kvm, &mmu->root_hpa, &invalid_list);
} else {
for (i = 0; i < 4; ++i)
if (mmu->pae_root[i] != 0)
mmu_free_root_page(kvm,
&mmu->pae_root[i],
&invalid_list);
mmu->root_hpa = INVALID_PAGE;
}
mmu->root_pgd = 0;
}
kvm_mmu_commit_zap_page(kvm, &invalid_list);
spin_unlock(&kvm->mmu_lock);
}
EXPORT_SYMBOL_GPL(kvm_mmu_free_roots);
static int mmu_check_root(struct kvm_vcpu *vcpu, gfn_t root_gfn)
{
int ret = 0;
if (!kvm_vcpu_is_visible_gfn(vcpu, root_gfn)) {
kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
ret = 1;
}
return ret;
}
static hpa_t mmu_alloc_root(struct kvm_vcpu *vcpu, gfn_t gfn, gva_t gva,
u8 level, bool direct)
{
struct kvm_mmu_page *sp;
spin_lock(&vcpu->kvm->mmu_lock);
if (make_mmu_pages_available(vcpu)) {
spin_unlock(&vcpu->kvm->mmu_lock);
return INVALID_PAGE;
}
sp = kvm_mmu_get_page(vcpu, gfn, gva, level, direct, ACC_ALL);
++sp->root_count;
spin_unlock(&vcpu->kvm->mmu_lock);
return __pa(sp->spt);
}
static int mmu_alloc_direct_roots(struct kvm_vcpu *vcpu)
{
u8 shadow_root_level = vcpu->arch.mmu->shadow_root_level;
hpa_t root;
unsigned i;
if (vcpu->kvm->arch.tdp_mmu_enabled) {
root = kvm_tdp_mmu_get_vcpu_root_hpa(vcpu);
if (!VALID_PAGE(root))
return -ENOSPC;
vcpu->arch.mmu->root_hpa = root;
} else if (shadow_root_level >= PT64_ROOT_4LEVEL) {
root = mmu_alloc_root(vcpu, 0, 0, shadow_root_level,
true);
if (!VALID_PAGE(root))
return -ENOSPC;
vcpu->arch.mmu->root_hpa = root;
} else if (shadow_root_level == PT32E_ROOT_LEVEL) {
for (i = 0; i < 4; ++i) {
MMU_WARN_ON(VALID_PAGE(vcpu->arch.mmu->pae_root[i]));
root = mmu_alloc_root(vcpu, i << (30 - PAGE_SHIFT),
i << 30, PT32_ROOT_LEVEL, true);
if (!VALID_PAGE(root))
return -ENOSPC;
vcpu->arch.mmu->pae_root[i] = root | PT_PRESENT_MASK;
}
vcpu->arch.mmu->root_hpa = __pa(vcpu->arch.mmu->pae_root);
} else
BUG();
/* root_pgd is ignored for direct MMUs. */
vcpu->arch.mmu->root_pgd = 0;
return 0;
}
static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
{
u64 pdptr, pm_mask;
gfn_t root_gfn, root_pgd;
hpa_t root;
int i;
root_pgd = vcpu->arch.mmu->get_guest_pgd(vcpu);
root_gfn = root_pgd >> PAGE_SHIFT;
if (mmu_check_root(vcpu, root_gfn))
return 1;
/*
* Do we shadow a long mode page table? If so we need to
* write-protect the guests page table root.
*/
if (vcpu->arch.mmu->root_level >= PT64_ROOT_4LEVEL) {
MMU_WARN_ON(VALID_PAGE(vcpu->arch.mmu->root_hpa));
root = mmu_alloc_root(vcpu, root_gfn, 0,
vcpu->arch.mmu->shadow_root_level, false);
if (!VALID_PAGE(root))
return -ENOSPC;
vcpu->arch.mmu->root_hpa = root;
goto set_root_pgd;
}
/*
* We shadow a 32 bit page table. This may be a legacy 2-level
* or a PAE 3-level page table. In either case we need to be aware that
* the shadow page table may be a PAE or a long mode page table.
*/
pm_mask = PT_PRESENT_MASK;
if (vcpu->arch.mmu->shadow_root_level == PT64_ROOT_4LEVEL)
pm_mask |= PT_ACCESSED_MASK | PT_WRITABLE_MASK | PT_USER_MASK;
for (i = 0; i < 4; ++i) {
MMU_WARN_ON(VALID_PAGE(vcpu->arch.mmu->pae_root[i]));
if (vcpu->arch.mmu->root_level == PT32E_ROOT_LEVEL) {
pdptr = vcpu->arch.mmu->get_pdptr(vcpu, i);
if (!(pdptr & PT_PRESENT_MASK)) {
vcpu->arch.mmu->pae_root[i] = 0;
continue;
}
root_gfn = pdptr >> PAGE_SHIFT;
if (mmu_check_root(vcpu, root_gfn))
return 1;
}
root = mmu_alloc_root(vcpu, root_gfn, i << 30,
PT32_ROOT_LEVEL, false);
if (!VALID_PAGE(root))
return -ENOSPC;
vcpu->arch.mmu->pae_root[i] = root | pm_mask;
}
vcpu->arch.mmu->root_hpa = __pa(vcpu->arch.mmu->pae_root);
/*
* If we shadow a 32 bit page table with a long mode page
* table we enter this path.
*/
if (vcpu->arch.mmu->shadow_root_level == PT64_ROOT_4LEVEL) {
if (vcpu->arch.mmu->lm_root == NULL) {
/*
* The additional page necessary for this is only
* allocated on demand.
*/
u64 *lm_root;
lm_root = (void*)get_zeroed_page(GFP_KERNEL_ACCOUNT);
if (lm_root == NULL)
return 1;
lm_root[0] = __pa(vcpu->arch.mmu->pae_root) | pm_mask;
vcpu->arch.mmu->lm_root = lm_root;
}
vcpu->arch.mmu->root_hpa = __pa(vcpu->arch.mmu->lm_root);
}
set_root_pgd:
vcpu->arch.mmu->root_pgd = root_pgd;
x86/kvm/mmu: fix switch between root and guest MMUs Commit 14c07ad89f4d ("x86/kvm/mmu: introduce guest_mmu") brought one subtle change: previously, when switching back from L2 to L1, we were resetting MMU hooks (like mmu->get_cr3()) in kvm_init_mmu() called from nested_vmx_load_cr3() and now we do that in nested_ept_uninit_mmu_context() when we re-target vcpu->arch.mmu pointer. The change itself looks logical: if nested_ept_init_mmu_context() changes something than nested_ept_uninit_mmu_context() restores it back. There is, however, one thing: the following call chain: nested_vmx_load_cr3() kvm_mmu_new_cr3() __kvm_mmu_new_cr3() fast_cr3_switch() cached_root_available() now happens with MMU hooks pointing to the new MMU (root MMU in our case) while previously it was happening with the old one. cached_root_available() tries to stash current root but it is incorrect to read current CR3 with mmu->get_cr3(), we need to use old_mmu->get_cr3() which in case we're switching from L2 to L1 is guest_mmu. (BTW, in shadow page tables case this is a non-issue because we don't switch MMU). While we could've tried to guess that we're switching between MMUs and call the right ->get_cr3() from cached_root_available() this seems to be overly complicated. Instead, just stash the corresponding CR3 when setting root_hpa and make cached_root_available() use the stashed value. Fixes: 14c07ad89f4d ("x86/kvm/mmu: introduce guest_mmu") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-23 00:45:01 +08:00
return 0;
}
static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
{
if (vcpu->arch.mmu->direct_map)
return mmu_alloc_direct_roots(vcpu);
else
return mmu_alloc_shadow_roots(vcpu);
}
void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu)
{
int i;
struct kvm_mmu_page *sp;
if (vcpu->arch.mmu->direct_map)
return;
if (!VALID_PAGE(vcpu->arch.mmu->root_hpa))
return;
vcpu_clear_mmio_info(vcpu, MMIO_GVA_ANY);
if (vcpu->arch.mmu->root_level >= PT64_ROOT_4LEVEL) {
hpa_t root = vcpu->arch.mmu->root_hpa;
sp = to_shadow_page(root);
/*
* Even if another CPU was marking the SP as unsync-ed
* simultaneously, any guest page table changes are not
* guaranteed to be visible anyway until this VCPU issues a TLB
* flush strictly after those changes are made. We only need to
* ensure that the other CPU sets these flags before any actual
* changes to the page tables are made. The comments in
* mmu_need_write_protect() describe what could go wrong if this
* requirement isn't satisfied.
*/
if (!smp_load_acquire(&sp->unsync) &&
!smp_load_acquire(&sp->unsync_children))
return;
spin_lock(&vcpu->kvm->mmu_lock);
kvm_mmu_audit(vcpu, AUDIT_PRE_SYNC);
mmu_sync_children(vcpu, sp);
kvm_mmu_audit(vcpu, AUDIT_POST_SYNC);
spin_unlock(&vcpu->kvm->mmu_lock);
return;
}
spin_lock(&vcpu->kvm->mmu_lock);
kvm_mmu_audit(vcpu, AUDIT_PRE_SYNC);
for (i = 0; i < 4; ++i) {
hpa_t root = vcpu->arch.mmu->pae_root[i];
if (root && VALID_PAGE(root)) {
root &= PT64_BASE_ADDR_MASK;
sp = to_shadow_page(root);
mmu_sync_children(vcpu, sp);
}
}
kvm_mmu_audit(vcpu, AUDIT_POST_SYNC);
spin_unlock(&vcpu->kvm->mmu_lock);
}
EXPORT_SYMBOL_GPL(kvm_mmu_sync_roots);
KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:14 +08:00
static gpa_t nonpaging_gva_to_gpa(struct kvm_vcpu *vcpu, gpa_t vaddr,
u32 access, struct x86_exception *exception)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
if (exception)
exception->error_code = 0;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
return vaddr;
}
KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:14 +08:00
static gpa_t nonpaging_gva_to_gpa_nested(struct kvm_vcpu *vcpu, gpa_t vaddr,
u32 access,
struct x86_exception *exception)
{
if (exception)
exception->error_code = 0;
return vcpu->arch.nested_mmu.translate_gpa(vcpu, vaddr, access, exception);
}
static bool
__is_rsvd_bits_set(struct rsvd_bits_validate *rsvd_check, u64 pte, int level)
{
KVM: x86/mmu: Micro-optimize nEPT's bad memptype/XWR checks Rework the handling of nEPT's bad memtype/XWR checks to micro-optimize the checks as much as possible. Move the check to a separate helper, __is_bad_mt_xwr(), which allows the guest_rsvd_check usage in paging_tmpl.h to omit the check entirely for paging32/64 (bad_mt_xwr is always zero for non-nEPT) while retaining the bitwise-OR of the current code for the shadow_zero_check in walk_shadow_page_get_mmio_spte(). Add a comment for the bitwise-OR usage in the mmio spte walk to avoid future attempts to "fix" the code, which is what prompted this optimization in the first place[*]. Opportunistically remove the superfluous '!= 0' and parantheses, and use BIT_ULL() instead of open coding its equivalent. The net effect is that code generation is largely unchanged for walk_shadow_page_get_mmio_spte(), marginally better for ept_prefetch_invalid_gpte(), and significantly improved for paging32/64_prefetch_invalid_gpte(). Note, walk_shadow_page_get_mmio_spte() can't use a templated version of the memtype/XRW as it works on the host's shadow PTEs, e.g. checks that KVM hasn't borked its EPT tables. Even if it could be templated, the benefits of having a single implementation far outweight the few uops that would be saved for NPT or non-TDP paging, e.g. most compilers inline it all the way to up kvm_mmu_page_fault(). [*] https://lkml.kernel.org/r/20200108001859.25254-1-sean.j.christopherson@intel.com Cc: Jim Mattson <jmattson@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-10 07:06:40 +08:00
int bit7 = (pte >> 7) & 1;
KVM: x86/mmu: Micro-optimize nEPT's bad memptype/XWR checks Rework the handling of nEPT's bad memtype/XWR checks to micro-optimize the checks as much as possible. Move the check to a separate helper, __is_bad_mt_xwr(), which allows the guest_rsvd_check usage in paging_tmpl.h to omit the check entirely for paging32/64 (bad_mt_xwr is always zero for non-nEPT) while retaining the bitwise-OR of the current code for the shadow_zero_check in walk_shadow_page_get_mmio_spte(). Add a comment for the bitwise-OR usage in the mmio spte walk to avoid future attempts to "fix" the code, which is what prompted this optimization in the first place[*]. Opportunistically remove the superfluous '!= 0' and parantheses, and use BIT_ULL() instead of open coding its equivalent. The net effect is that code generation is largely unchanged for walk_shadow_page_get_mmio_spte(), marginally better for ept_prefetch_invalid_gpte(), and significantly improved for paging32/64_prefetch_invalid_gpte(). Note, walk_shadow_page_get_mmio_spte() can't use a templated version of the memtype/XRW as it works on the host's shadow PTEs, e.g. checks that KVM hasn't borked its EPT tables. Even if it could be templated, the benefits of having a single implementation far outweight the few uops that would be saved for NPT or non-TDP paging, e.g. most compilers inline it all the way to up kvm_mmu_page_fault(). [*] https://lkml.kernel.org/r/20200108001859.25254-1-sean.j.christopherson@intel.com Cc: Jim Mattson <jmattson@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-10 07:06:40 +08:00
return pte & rsvd_check->rsvd_bits_mask[bit7][level-1];
}
KVM: x86/mmu: Micro-optimize nEPT's bad memptype/XWR checks Rework the handling of nEPT's bad memtype/XWR checks to micro-optimize the checks as much as possible. Move the check to a separate helper, __is_bad_mt_xwr(), which allows the guest_rsvd_check usage in paging_tmpl.h to omit the check entirely for paging32/64 (bad_mt_xwr is always zero for non-nEPT) while retaining the bitwise-OR of the current code for the shadow_zero_check in walk_shadow_page_get_mmio_spte(). Add a comment for the bitwise-OR usage in the mmio spte walk to avoid future attempts to "fix" the code, which is what prompted this optimization in the first place[*]. Opportunistically remove the superfluous '!= 0' and parantheses, and use BIT_ULL() instead of open coding its equivalent. The net effect is that code generation is largely unchanged for walk_shadow_page_get_mmio_spte(), marginally better for ept_prefetch_invalid_gpte(), and significantly improved for paging32/64_prefetch_invalid_gpte(). Note, walk_shadow_page_get_mmio_spte() can't use a templated version of the memtype/XRW as it works on the host's shadow PTEs, e.g. checks that KVM hasn't borked its EPT tables. Even if it could be templated, the benefits of having a single implementation far outweight the few uops that would be saved for NPT or non-TDP paging, e.g. most compilers inline it all the way to up kvm_mmu_page_fault(). [*] https://lkml.kernel.org/r/20200108001859.25254-1-sean.j.christopherson@intel.com Cc: Jim Mattson <jmattson@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-10 07:06:40 +08:00
static bool __is_bad_mt_xwr(struct rsvd_bits_validate *rsvd_check, u64 pte)
{
KVM: x86/mmu: Micro-optimize nEPT's bad memptype/XWR checks Rework the handling of nEPT's bad memtype/XWR checks to micro-optimize the checks as much as possible. Move the check to a separate helper, __is_bad_mt_xwr(), which allows the guest_rsvd_check usage in paging_tmpl.h to omit the check entirely for paging32/64 (bad_mt_xwr is always zero for non-nEPT) while retaining the bitwise-OR of the current code for the shadow_zero_check in walk_shadow_page_get_mmio_spte(). Add a comment for the bitwise-OR usage in the mmio spte walk to avoid future attempts to "fix" the code, which is what prompted this optimization in the first place[*]. Opportunistically remove the superfluous '!= 0' and parantheses, and use BIT_ULL() instead of open coding its equivalent. The net effect is that code generation is largely unchanged for walk_shadow_page_get_mmio_spte(), marginally better for ept_prefetch_invalid_gpte(), and significantly improved for paging32/64_prefetch_invalid_gpte(). Note, walk_shadow_page_get_mmio_spte() can't use a templated version of the memtype/XRW as it works on the host's shadow PTEs, e.g. checks that KVM hasn't borked its EPT tables. Even if it could be templated, the benefits of having a single implementation far outweight the few uops that would be saved for NPT or non-TDP paging, e.g. most compilers inline it all the way to up kvm_mmu_page_fault(). [*] https://lkml.kernel.org/r/20200108001859.25254-1-sean.j.christopherson@intel.com Cc: Jim Mattson <jmattson@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-10 07:06:40 +08:00
return rsvd_check->bad_mt_xwr & BIT_ULL(pte & 0x3f);
}
static bool mmio_info_in_cache(struct kvm_vcpu *vcpu, u64 addr, bool direct)
{
/*
* A nested guest cannot use the MMIO cache if it is using nested
* page tables, because cr2 is a nGPA while the cache stores GPAs.
*/
if (mmu_is_nested(vcpu))
return false;
if (direct)
return vcpu_match_mmio_gpa(vcpu, addr);
return vcpu_match_mmio_gva(vcpu, addr);
}
/* return true if reserved bit is detected on spte. */
static bool
walk_shadow_page_get_mmio_spte(struct kvm_vcpu *vcpu, u64 addr, u64 *sptep)
{
struct kvm_shadow_walk_iterator iterator;
u64 sptes[PT64_ROOT_MAX_LEVEL], spte = 0ull;
KVM: x86/mmu: Micro-optimize nEPT's bad memptype/XWR checks Rework the handling of nEPT's bad memtype/XWR checks to micro-optimize the checks as much as possible. Move the check to a separate helper, __is_bad_mt_xwr(), which allows the guest_rsvd_check usage in paging_tmpl.h to omit the check entirely for paging32/64 (bad_mt_xwr is always zero for non-nEPT) while retaining the bitwise-OR of the current code for the shadow_zero_check in walk_shadow_page_get_mmio_spte(). Add a comment for the bitwise-OR usage in the mmio spte walk to avoid future attempts to "fix" the code, which is what prompted this optimization in the first place[*]. Opportunistically remove the superfluous '!= 0' and parantheses, and use BIT_ULL() instead of open coding its equivalent. The net effect is that code generation is largely unchanged for walk_shadow_page_get_mmio_spte(), marginally better for ept_prefetch_invalid_gpte(), and significantly improved for paging32/64_prefetch_invalid_gpte(). Note, walk_shadow_page_get_mmio_spte() can't use a templated version of the memtype/XRW as it works on the host's shadow PTEs, e.g. checks that KVM hasn't borked its EPT tables. Even if it could be templated, the benefits of having a single implementation far outweight the few uops that would be saved for NPT or non-TDP paging, e.g. most compilers inline it all the way to up kvm_mmu_page_fault(). [*] https://lkml.kernel.org/r/20200108001859.25254-1-sean.j.christopherson@intel.com Cc: Jim Mattson <jmattson@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-10 07:06:40 +08:00
struct rsvd_bits_validate *rsvd_check;
int root, leaf;
bool reserved = false;
KVM: x86/mmu: Micro-optimize nEPT's bad memptype/XWR checks Rework the handling of nEPT's bad memtype/XWR checks to micro-optimize the checks as much as possible. Move the check to a separate helper, __is_bad_mt_xwr(), which allows the guest_rsvd_check usage in paging_tmpl.h to omit the check entirely for paging32/64 (bad_mt_xwr is always zero for non-nEPT) while retaining the bitwise-OR of the current code for the shadow_zero_check in walk_shadow_page_get_mmio_spte(). Add a comment for the bitwise-OR usage in the mmio spte walk to avoid future attempts to "fix" the code, which is what prompted this optimization in the first place[*]. Opportunistically remove the superfluous '!= 0' and parantheses, and use BIT_ULL() instead of open coding its equivalent. The net effect is that code generation is largely unchanged for walk_shadow_page_get_mmio_spte(), marginally better for ept_prefetch_invalid_gpte(), and significantly improved for paging32/64_prefetch_invalid_gpte(). Note, walk_shadow_page_get_mmio_spte() can't use a templated version of the memtype/XRW as it works on the host's shadow PTEs, e.g. checks that KVM hasn't borked its EPT tables. Even if it could be templated, the benefits of having a single implementation far outweight the few uops that would be saved for NPT or non-TDP paging, e.g. most compilers inline it all the way to up kvm_mmu_page_fault(). [*] https://lkml.kernel.org/r/20200108001859.25254-1-sean.j.christopherson@intel.com Cc: Jim Mattson <jmattson@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-10 07:06:40 +08:00
rsvd_check = &vcpu->arch.mmu->shadow_zero_check;
walk_shadow_page_lockless_begin(vcpu);
for (shadow_walk_init(&iterator, vcpu, addr),
leaf = root = iterator.level;
shadow_walk_okay(&iterator);
__shadow_walk_next(&iterator, spte)) {
spte = mmu_spte_get_lockless(iterator.sptep);
sptes[leaf - 1] = spte;
leaf--;
if (!is_shadow_present_pte(spte))
break;
KVM: x86/mmu: Micro-optimize nEPT's bad memptype/XWR checks Rework the handling of nEPT's bad memtype/XWR checks to micro-optimize the checks as much as possible. Move the check to a separate helper, __is_bad_mt_xwr(), which allows the guest_rsvd_check usage in paging_tmpl.h to omit the check entirely for paging32/64 (bad_mt_xwr is always zero for non-nEPT) while retaining the bitwise-OR of the current code for the shadow_zero_check in walk_shadow_page_get_mmio_spte(). Add a comment for the bitwise-OR usage in the mmio spte walk to avoid future attempts to "fix" the code, which is what prompted this optimization in the first place[*]. Opportunistically remove the superfluous '!= 0' and parantheses, and use BIT_ULL() instead of open coding its equivalent. The net effect is that code generation is largely unchanged for walk_shadow_page_get_mmio_spte(), marginally better for ept_prefetch_invalid_gpte(), and significantly improved for paging32/64_prefetch_invalid_gpte(). Note, walk_shadow_page_get_mmio_spte() can't use a templated version of the memtype/XRW as it works on the host's shadow PTEs, e.g. checks that KVM hasn't borked its EPT tables. Even if it could be templated, the benefits of having a single implementation far outweight the few uops that would be saved for NPT or non-TDP paging, e.g. most compilers inline it all the way to up kvm_mmu_page_fault(). [*] https://lkml.kernel.org/r/20200108001859.25254-1-sean.j.christopherson@intel.com Cc: Jim Mattson <jmattson@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-10 07:06:40 +08:00
/*
* Use a bitwise-OR instead of a logical-OR to aggregate the
* reserved bit and EPT's invalid memtype/XWR checks to avoid
* adding a Jcc in the loop.
*/
reserved |= __is_bad_mt_xwr(rsvd_check, spte) |
__is_rsvd_bits_set(rsvd_check, spte, iterator.level);
}
walk_shadow_page_lockless_end(vcpu);
if (reserved) {
pr_err("%s: detect reserved bits on spte, addr 0x%llx, dump hierarchy:\n",
__func__, addr);
while (root > leaf) {
pr_err("------ spte 0x%llx level %d.\n",
sptes[root - 1], root);
root--;
}
}
KVM: x86/mmu: Move root_hpa validity checks to top of page fault handler Add a check on root_hpa at the beginning of the page fault handler to consolidate several checks on root_hpa that are scattered throughout the page fault code. This is a preparatory step towards eventually removing such checks altogether, or at the very least WARNing if an invalid root is encountered. Remove only the checks that can be easily audited to confirm that root_hpa cannot be invalidated between their current location and the new check in kvm_mmu_page_fault(), and aren't currently protected by mmu_lock, i.e. keep the checks in __direct_map() and FNAME(fetch) for the time being. The root_hpa checks that are consolidate were all added by commit 37f6a4e237303 ("KVM: x86: handle invalid root_hpa everywhere") which was a follow up to a bug fix for __direct_map(), commit 989c6b34f6a94 ("KVM: MMU: handle invalid root_hpa at __direct_map") At the time, nested VMX had, in hindsight, crazy handling of nested interrupts and would trigger a nested VM-Exit in ->interrupt_allowed(), and thus unexpectedly reset the MMU in flows such as can_do_async_pf(). Now that the wonky nested VM-Exit behavior is gone, the root_hpa checks are bogus and confusing, e.g. it's not at all obvious what they actually protect against, and at first glance they appear to be broken since many of them run without holding mmu_lock. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:27 +08:00
*sptep = spte;
return reserved;
}
static int handle_mmio_page_fault(struct kvm_vcpu *vcpu, u64 addr, bool direct)
{
u64 spte;
bool reserved;
if (mmio_info_in_cache(vcpu, addr, direct))
return RET_PF_EMULATE;
reserved = walk_shadow_page_get_mmio_spte(vcpu, addr, &spte);
if (WARN_ON(reserved))
return -EINVAL;
if (is_mmio_spte(spte)) {
gfn_t gfn = get_mmio_spte_gfn(spte);
unsigned int access = get_mmio_spte_access(spte);
if (!check_mmio_spte(vcpu, spte))
return RET_PF_INVALID;
if (direct)
addr = 0;
trace_handle_mmio_page_fault(addr, gfn, access);
vcpu_cache_mmio_info(vcpu, addr, gfn, access);
return RET_PF_EMULATE;
}
/*
* If the page table is zapped by other cpus, let CPU fault again on
* the address.
*/
return RET_PF_RETRY;
}
static bool page_fault_handle_page_track(struct kvm_vcpu *vcpu,
u32 error_code, gfn_t gfn)
{
if (unlikely(error_code & PFERR_RSVD_MASK))
return false;
if (!(error_code & PFERR_PRESENT_MASK) ||
!(error_code & PFERR_WRITE_MASK))
return false;
/*
* guest is writing the page which is write tracked which can
* not be fixed by page fault handler.
*/
if (kvm_page_track_is_active(vcpu, gfn, KVM_PAGE_TRACK_WRITE))
return true;
return false;
}
static void shadow_page_table_clear_flood(struct kvm_vcpu *vcpu, gva_t addr)
{
struct kvm_shadow_walk_iterator iterator;
u64 spte;
walk_shadow_page_lockless_begin(vcpu);
for_each_shadow_entry_lockless(vcpu, addr, iterator, spte) {
clear_sp_write_flooding_count(iterator.sptep);
if (!is_shadow_present_pte(spte))
break;
}
walk_shadow_page_lockless_end(vcpu);
}
static bool kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
gfn_t gfn)
{
struct kvm_arch_async_pf arch;
arch.token = (vcpu->arch.apf.id++ << 12) | vcpu->vcpu_id;
arch.gfn = gfn;
arch.direct_map = vcpu->arch.mmu->direct_map;
arch.cr3 = vcpu->arch.mmu->get_guest_pgd(vcpu);
return kvm_setup_async_pf(vcpu, cr2_or_gpa,
kvm_vcpu_gfn_to_hva(vcpu, gfn), &arch);
}
static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
gpa_t cr2_or_gpa, kvm_pfn_t *pfn, bool write,
bool *writable)
{
struct kvm_memory_slot *slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
bool async;
/* Don't expose private memslots to L2. */
if (is_guest_mode(vcpu) && !kvm_is_visible_memslot(slot)) {
*pfn = KVM_PFN_NOSLOT;
*writable = false;
return false;
}
async = false;
*pfn = __gfn_to_pfn_memslot(slot, gfn, false, &async, write, writable);
if (!async)
return false; /* *pfn has correct page already */
if (!prefault && kvm_can_do_async_pf(vcpu)) {
trace_kvm_try_async_get_page(cr2_or_gpa, gfn);
if (kvm_find_async_pf_gfn(vcpu, gfn)) {
trace_kvm_async_pf_doublefault(cr2_or_gpa, gfn);
kvm_make_request(KVM_REQ_APF_HALT, vcpu);
return true;
} else if (kvm_arch_setup_async_pf(vcpu, cr2_or_gpa, gfn))
return true;
}
*pfn = __gfn_to_pfn_memslot(slot, gfn, false, NULL, write, writable);
return false;
}
static int direct_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
bool prefault, int max_level, bool is_tdp)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
bool write = error_code & PFERR_WRITE_MASK;
bool map_writable;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
gfn_t gfn = gpa >> PAGE_SHIFT;
unsigned long mmu_seq;
kvm_pfn_t pfn;
int r;
if (page_fault_handle_page_track(vcpu, error_code, gfn))
return RET_PF_EMULATE;
r = fast_page_fault(vcpu, gpa, error_code);
if (r != RET_PF_INVALID)
return r;
r = mmu_topup_memory_caches(vcpu, false);
if (r)
return r;
mmu_seq = vcpu->kvm->mmu_notifier_seq;
smp_rmb();
if (try_async_pf(vcpu, prefault, gfn, gpa, &pfn, write, &map_writable))
return RET_PF_RETRY;
if (handle_abnormal_pfn(vcpu, is_tdp ? 0 : gpa, gfn, pfn, ACC_ALL, &r))
return r;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
r = RET_PF_RETRY;
spin_lock(&vcpu->kvm->mmu_lock);
if (mmu_notifier_retry(vcpu->kvm, mmu_seq))
goto out_unlock;
r = make_mmu_pages_available(vcpu);
if (r)
goto out_unlock;
r = __direct_map(vcpu, gpa, error_code, map_writable, max_level, pfn,
prefault, is_tdp);
out_unlock:
spin_unlock(&vcpu->kvm->mmu_lock);
kvm_release_pfn_clean(pfn);
return r;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
static int nonpaging_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa,
u32 error_code, bool prefault)
{
pgprintk("%s: gva %lx error %x\n", __func__, gpa, error_code);
/* This path builds a PAE pagetable, we can map 2mb pages at maximum. */
return direct_page_fault(vcpu, gpa & PAGE_MASK, error_code, prefault,
PG_LEVEL_2M, false);
}
int kvm_handle_page_fault(struct kvm_vcpu *vcpu, u64 error_code,
u64 fault_address, char *insn, int insn_len)
{
int r = 1;
u32 flags = vcpu->arch.apf.host_apf_flags;
KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:14 +08:00
#ifndef CONFIG_X86_64
/* A 64-bit CR2 should be impossible on 32-bit KVM. */
if (WARN_ON_ONCE(fault_address >> 32))
return -EFAULT;
#endif
vcpu->arch.l1tf_flush_l1d = true;
if (!flags) {
trace_kvm_page_fault(fault_address, error_code);
if (kvm_event_needs_reinjection(vcpu))
kvm_mmu_unprotect_page_virt(vcpu, fault_address);
r = kvm_mmu_page_fault(vcpu, fault_address, error_code, insn,
insn_len);
} else if (flags & KVM_PV_REASON_PAGE_NOT_PRESENT) {
vcpu->arch.apf.host_apf_flags = 0;
local_irq_disable();
x86/kvm: Sanitize kvm_async_pf_task_wait() While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.262701431@linutronix.de
2020-03-07 07:42:06 +08:00
kvm_async_pf_task_wait_schedule(fault_address);
local_irq_enable();
} else {
WARN_ONCE(1, "Unexpected host async PF flags: %x\n", flags);
}
return r;
}
EXPORT_SYMBOL_GPL(kvm_handle_page_fault);
int kvm_tdp_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
bool prefault)
{
int max_level;
for (max_level = KVM_MAX_HUGEPAGE_LEVEL;
max_level > PG_LEVEL_4K;
max_level--) {
int page_num = KVM_PAGES_PER_HPAGE(max_level);
gfn_t base = (gpa >> PAGE_SHIFT) & ~(page_num - 1);
if (kvm_mtrr_check_gfn_range_consistency(vcpu, base, page_num))
break;
}
return direct_page_fault(vcpu, gpa, error_code, prefault,
max_level, true);
}
static void nonpaging_init_context(struct kvm_vcpu *vcpu,
struct kvm_mmu *context)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
context->page_fault = nonpaging_page_fault;
context->gva_to_gpa = nonpaging_gva_to_gpa;
context->sync_page = nonpaging_sync_page;
context->invlpg = NULL;
context->update_pte = nonpaging_update_pte;
context->root_level = 0;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
context->shadow_root_level = PT32E_ROOT_LEVEL;
context->direct_map = true;
context->nx = false;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
static inline bool is_root_usable(struct kvm_mmu_root_info *root, gpa_t pgd,
union kvm_mmu_page_role role)
{
return (role.direct || pgd == root->pgd) &&
VALID_PAGE(root->hpa) && to_shadow_page(root->hpa) &&
role.word == to_shadow_page(root->hpa)->role.word;
}
/*
* Find out if a previously cached root matching the new pgd/role is available.
* The current root is also inserted into the cache.
* If a matching root was found, it is assigned to kvm_mmu->root_hpa and true is
* returned.
* Otherwise, the LRU root from the cache is assigned to kvm_mmu->root_hpa and
* false is returned. This root should now be freed by the caller.
*/
static bool cached_root_available(struct kvm_vcpu *vcpu, gpa_t new_pgd,
union kvm_mmu_page_role new_role)
{
uint i;
struct kvm_mmu_root_info root;
struct kvm_mmu *mmu = vcpu->arch.mmu;
root.pgd = mmu->root_pgd;
root.hpa = mmu->root_hpa;
if (is_root_usable(&root, new_pgd, new_role))
return true;
for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++) {
swap(root, mmu->prev_roots[i]);
if (is_root_usable(&root, new_pgd, new_role))
break;
}
mmu->root_hpa = root.hpa;
mmu->root_pgd = root.pgd;
return i < KVM_MMU_NUM_PREV_ROOTS;
}
static bool fast_pgd_switch(struct kvm_vcpu *vcpu, gpa_t new_pgd,
union kvm_mmu_page_role new_role)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
struct kvm_mmu *mmu = vcpu->arch.mmu;
/*
* For now, limit the fast switch to 64-bit hosts+VMs in order to avoid
* having to deal with PDPTEs. We may add support for 32-bit hosts/VMs
* later if necessary.
*/
if (mmu->shadow_root_level >= PT64_ROOT_4LEVEL &&
mmu->root_level >= PT64_ROOT_4LEVEL)
return cached_root_available(vcpu, new_pgd, new_role);
return false;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
static void __kvm_mmu_new_pgd(struct kvm_vcpu *vcpu, gpa_t new_pgd,
union kvm_mmu_page_role new_role,
bool skip_tlb_flush, bool skip_mmu_sync)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
if (!fast_pgd_switch(vcpu, new_pgd, new_role)) {
kvm_mmu_free_roots(vcpu, vcpu->arch.mmu, KVM_MMU_ROOT_CURRENT);
return;
}
/*
* It's possible that the cached previous root page is obsolete because
* of a change in the MMU generation number. However, changing the
* generation number is accompanied by KVM_REQ_MMU_RELOAD, which will
* free the root set here and allocate a new one.
*/
kvm_make_request(KVM_REQ_LOAD_MMU_PGD, vcpu);
if (!skip_mmu_sync || force_flush_and_sync_on_reuse)
kvm_make_request(KVM_REQ_MMU_SYNC, vcpu);
if (!skip_tlb_flush || force_flush_and_sync_on_reuse)
kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
/*
* The last MMIO access's GVA and GPA are cached in the VCPU. When
* switching to a new CR3, that GVA->GPA mapping may no longer be
* valid. So clear any cached MMIO info even when we don't need to sync
* the shadow page tables.
*/
vcpu_clear_mmio_info(vcpu, MMIO_GVA_ANY);
__clear_sp_write_flooding_count(to_shadow_page(vcpu->arch.mmu->root_hpa));
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
void kvm_mmu_new_pgd(struct kvm_vcpu *vcpu, gpa_t new_pgd, bool skip_tlb_flush,
bool skip_mmu_sync)
{
__kvm_mmu_new_pgd(vcpu, new_pgd, kvm_mmu_calc_root_page_role(vcpu),
skip_tlb_flush, skip_mmu_sync);
}
EXPORT_SYMBOL_GPL(kvm_mmu_new_pgd);
static unsigned long get_cr3(struct kvm_vcpu *vcpu)
{
return kvm_read_cr3(vcpu);
}
static bool sync_mmio_spte(struct kvm_vcpu *vcpu, u64 *sptep, gfn_t gfn,
unsigned int access, int *nr_present)
{
if (unlikely(is_mmio_spte(*sptep))) {
if (gfn != get_mmio_spte_gfn(*sptep)) {
mmu_spte_clear_no_track(sptep);
return true;
}
(*nr_present)++;
mark_mmio_spte(vcpu, sptep, gfn, access);
return true;
}
return false;
}
static inline bool is_last_gpte(struct kvm_mmu *mmu,
unsigned level, unsigned gpte)
{
/*
* The RHS has bit 7 set iff level < mmu->last_nonleaf_level.
* If it is clear, there are no large pages at this level, so clear
* PT_PAGE_SIZE_MASK in gpte if that is the case.
*/
gpte &= level - mmu->last_nonleaf_level;
/*
* PG_LEVEL_4K always terminates. The RHS has bit 7 set
* iff level <= PG_LEVEL_4K, which for our purpose means
* level == PG_LEVEL_4K; set PT_PAGE_SIZE_MASK in gpte then.
*/
gpte |= level - PG_LEVEL_4K - 1;
return gpte & PT_PAGE_SIZE_MASK;
}
nEPT: Add EPT tables support to paging_tmpl.h This is the first patch in a series which adds nested EPT support to KVM's nested VMX. Nested EPT means emulating EPT for an L1 guest so that L1 can use EPT when running a nested guest L2. When L1 uses EPT, it allows the L2 guest to set its own cr3 and take its own page faults without either of L0 or L1 getting involved. This often significanlty improves L2's performance over the previous two alternatives (shadow page tables over EPT, and shadow page tables over shadow page tables). This patch adds EPT support to paging_tmpl.h. paging_tmpl.h contains the code for reading and writing page tables. The code for 32-bit and 64-bit tables is very similar, but not identical, so paging_tmpl.h is #include'd twice in mmu.c, once with PTTTYPE=32 and once with PTTYPE=64, and this generates the two sets of similar functions. There are subtle but important differences between the format of EPT tables and that of ordinary x86 64-bit page tables, so for nested EPT we need a third set of functions to read the guest EPT table and to write the shadow EPT table. So this patch adds third PTTYPE, PTTYPE_EPT, which creates functions (prefixed with "EPT") which correctly read and write EPT tables. Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Nadav Har'El <nyh@il.ibm.com> Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Xinhao Xu <xinhao.xu@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-08-05 16:07:12 +08:00
#define PTTYPE_EPT 18 /* arbitrary */
#define PTTYPE PTTYPE_EPT
#include "paging_tmpl.h"
#undef PTTYPE
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
#define PTTYPE 64
#include "paging_tmpl.h"
#undef PTTYPE
#define PTTYPE 32
#include "paging_tmpl.h"
#undef PTTYPE
static void
__reset_rsvds_bits_mask(struct kvm_vcpu *vcpu,
struct rsvd_bits_validate *rsvd_check,
int maxphyaddr, int level, bool nx, bool gbpages,
bool pse, bool amd)
{
u64 exb_bit_rsvd = 0;
u64 gbpages_bit_rsvd = 0;
u64 nonleaf_bit8_rsvd = 0;
rsvd_check->bad_mt_xwr = 0;
if (!nx)
exb_bit_rsvd = rsvd_bits(63, 63);
if (!gbpages)
gbpages_bit_rsvd = rsvd_bits(7, 7);
/*
* Non-leaf PML4Es and PDPEs reserve bit 8 (which would be the G bit for
* leaf entries) on AMD CPUs only.
*/
if (amd)
nonleaf_bit8_rsvd = rsvd_bits(8, 8);
switch (level) {
case PT32_ROOT_LEVEL:
/* no rsvd bits for 2 level 4K page table entries */
rsvd_check->rsvd_bits_mask[0][1] = 0;
rsvd_check->rsvd_bits_mask[0][0] = 0;
rsvd_check->rsvd_bits_mask[1][0] =
rsvd_check->rsvd_bits_mask[0][0];
if (!pse) {
rsvd_check->rsvd_bits_mask[1][1] = 0;
break;
}
if (is_cpuid_PSE36())
/* 36bits PSE 4MB page */
rsvd_check->rsvd_bits_mask[1][1] = rsvd_bits(17, 21);
else
/* 32 bits PSE 4MB page */
rsvd_check->rsvd_bits_mask[1][1] = rsvd_bits(13, 21);
break;
case PT32E_ROOT_LEVEL:
rsvd_check->rsvd_bits_mask[0][2] =
rsvd_bits(maxphyaddr, 63) |
rsvd_bits(5, 8) | rsvd_bits(1, 2); /* PDPTE */
rsvd_check->rsvd_bits_mask[0][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 62); /* PDE */
rsvd_check->rsvd_bits_mask[0][0] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 62); /* PTE */
rsvd_check->rsvd_bits_mask[1][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 62) |
rsvd_bits(13, 20); /* large page */
rsvd_check->rsvd_bits_mask[1][0] =
rsvd_check->rsvd_bits_mask[0][0];
break;
case PT64_ROOT_5LEVEL:
rsvd_check->rsvd_bits_mask[0][4] = exb_bit_rsvd |
nonleaf_bit8_rsvd | rsvd_bits(7, 7) |
rsvd_bits(maxphyaddr, 51);
rsvd_check->rsvd_bits_mask[1][4] =
rsvd_check->rsvd_bits_mask[0][4];
fallthrough;
case PT64_ROOT_4LEVEL:
rsvd_check->rsvd_bits_mask[0][3] = exb_bit_rsvd |
nonleaf_bit8_rsvd | rsvd_bits(7, 7) |
rsvd_bits(maxphyaddr, 51);
rsvd_check->rsvd_bits_mask[0][2] = exb_bit_rsvd |
gbpages_bit_rsvd |
rsvd_bits(maxphyaddr, 51);
rsvd_check->rsvd_bits_mask[0][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 51);
rsvd_check->rsvd_bits_mask[0][0] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 51);
rsvd_check->rsvd_bits_mask[1][3] =
rsvd_check->rsvd_bits_mask[0][3];
rsvd_check->rsvd_bits_mask[1][2] = exb_bit_rsvd |
gbpages_bit_rsvd | rsvd_bits(maxphyaddr, 51) |
rsvd_bits(13, 29);
rsvd_check->rsvd_bits_mask[1][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 51) |
rsvd_bits(13, 20); /* large page */
rsvd_check->rsvd_bits_mask[1][0] =
rsvd_check->rsvd_bits_mask[0][0];
break;
}
}
static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu,
struct kvm_mmu *context)
{
__reset_rsvds_bits_mask(vcpu, &context->guest_rsvd_check,
cpuid_maxphyaddr(vcpu), context->root_level,
context->nx,
guest_cpuid_has(vcpu, X86_FEATURE_GBPAGES),
is_pse(vcpu),
guest_cpuid_is_amd_or_hygon(vcpu));
}
static void
__reset_rsvds_bits_mask_ept(struct rsvd_bits_validate *rsvd_check,
int maxphyaddr, bool execonly)
{
u64 bad_mt_xwr;
rsvd_check->rsvd_bits_mask[0][4] =
rsvd_bits(maxphyaddr, 51) | rsvd_bits(3, 7);
rsvd_check->rsvd_bits_mask[0][3] =
rsvd_bits(maxphyaddr, 51) | rsvd_bits(3, 7);
rsvd_check->rsvd_bits_mask[0][2] =
rsvd_bits(maxphyaddr, 51) | rsvd_bits(3, 6);
rsvd_check->rsvd_bits_mask[0][1] =
rsvd_bits(maxphyaddr, 51) | rsvd_bits(3, 6);
rsvd_check->rsvd_bits_mask[0][0] = rsvd_bits(maxphyaddr, 51);
/* large page */
rsvd_check->rsvd_bits_mask[1][4] = rsvd_check->rsvd_bits_mask[0][4];
rsvd_check->rsvd_bits_mask[1][3] = rsvd_check->rsvd_bits_mask[0][3];
rsvd_check->rsvd_bits_mask[1][2] =
rsvd_bits(maxphyaddr, 51) | rsvd_bits(12, 29);
rsvd_check->rsvd_bits_mask[1][1] =
rsvd_bits(maxphyaddr, 51) | rsvd_bits(12, 20);
rsvd_check->rsvd_bits_mask[1][0] = rsvd_check->rsvd_bits_mask[0][0];
bad_mt_xwr = 0xFFull << (2 * 8); /* bits 3..5 must not be 2 */
bad_mt_xwr |= 0xFFull << (3 * 8); /* bits 3..5 must not be 3 */
bad_mt_xwr |= 0xFFull << (7 * 8); /* bits 3..5 must not be 7 */
bad_mt_xwr |= REPEAT_BYTE(1ull << 2); /* bits 0..2 must not be 010 */
bad_mt_xwr |= REPEAT_BYTE(1ull << 6); /* bits 0..2 must not be 110 */
if (!execonly) {
/* bits 0..2 must not be 100 unless VMX capabilities allow it */
bad_mt_xwr |= REPEAT_BYTE(1ull << 4);
}
rsvd_check->bad_mt_xwr = bad_mt_xwr;
}
static void reset_rsvds_bits_mask_ept(struct kvm_vcpu *vcpu,
struct kvm_mmu *context, bool execonly)
{
__reset_rsvds_bits_mask_ept(&context->guest_rsvd_check,
cpuid_maxphyaddr(vcpu), execonly);
}
/*
* the page table on host is the shadow page table for the page
* table in guest or amd nested guest, its mmu features completely
* follow the features in guest.
*/
void
reset_shadow_zero_bits_mask(struct kvm_vcpu *vcpu, struct kvm_mmu *context)
{
bool uses_nx = context->nx ||
context->mmu_role.base.smep_andnot_wp;
struct rsvd_bits_validate *shadow_zero_check;
int i;
/*
* Passing "true" to the last argument is okay; it adds a check
* on bit 8 of the SPTEs which KVM doesn't use anyway.
*/
shadow_zero_check = &context->shadow_zero_check;
__reset_rsvds_bits_mask(vcpu, shadow_zero_check,
kvm: x86: Fix reserved bits related calculation errors caused by MKTME Intel MKTME repurposes several high bits of physical address as 'keyID' for memory encryption thus effectively reduces platform's maximum physical address bits. Exactly how many bits are reduced is configured by BIOS. To honor such HW behavior, the repurposed bits are reduced from cpuinfo_x86->x86_phys_bits when MKTME is detected in CPU detection. Similarly, AMD SME/SEV also reduces physical address bits for memory encryption, and cpuinfo->x86_phys_bits is reduced too when SME/SEV is detected, so for both MKTME and SME/SEV, boot_cpu_data.x86_phys_bits doesn't hold physical address bits reported by CPUID anymore. Currently KVM treats bits from boot_cpu_data.x86_phys_bits to 51 as reserved bits, but it's not true anymore for MKTME, since MKTME treats those reduced bits as 'keyID', but not reserved bits. Therefore boot_cpu_data.x86_phys_bits cannot be used to calculate reserved bits anymore, although we can still use it for AMD SME/SEV since SME/SEV treats the reduced bits differently -- they are treated as reserved bits, the same as other reserved bits in page table entity [1]. Fix by introducing a new 'shadow_phys_bits' variable in KVM x86 MMU code to store the effective physical bits w/o reserved bits -- for MKTME, it equals to physical address reported by CPUID, and for SME/SEV, it is boot_cpu_data.x86_phys_bits. Note that for the physical address bits reported to guest should remain unchanged -- KVM should report physical address reported by CPUID to guest, but not boot_cpu_data.x86_phys_bits. Because for Intel MKTME, there's no harm if guest sets up 'keyID' bits in guest page table (since MKTME only works at physical address level), and KVM doesn't even expose MKTME to guest. Arguably, for AMD SME/SEV, guest is aware of SEV thus it should adjust boot_cpu_data.x86_phys_bits when it detects SEV, therefore KVM should still reports physcial address reported by CPUID to guest. Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kai Huang <kai.huang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-03 18:08:53 +08:00
shadow_phys_bits,
context->shadow_root_level, uses_nx,
guest_cpuid_has(vcpu, X86_FEATURE_GBPAGES),
is_pse(vcpu), true);
if (!shadow_me_mask)
return;
for (i = context->shadow_root_level; --i >= 0;) {
shadow_zero_check->rsvd_bits_mask[0][i] &= ~shadow_me_mask;
shadow_zero_check->rsvd_bits_mask[1][i] &= ~shadow_me_mask;
}
}
EXPORT_SYMBOL_GPL(reset_shadow_zero_bits_mask);
static inline bool boot_cpu_is_amd(void)
{
WARN_ON_ONCE(!tdp_enabled);
return shadow_x_mask == 0;
}
/*
* the direct page table on host, use as much mmu features as
* possible, however, kvm currently does not do execution-protection.
*/
static void
reset_tdp_shadow_zero_bits_mask(struct kvm_vcpu *vcpu,
struct kvm_mmu *context)
{
struct rsvd_bits_validate *shadow_zero_check;
int i;
shadow_zero_check = &context->shadow_zero_check;
if (boot_cpu_is_amd())
__reset_rsvds_bits_mask(vcpu, shadow_zero_check,
kvm: x86: Fix reserved bits related calculation errors caused by MKTME Intel MKTME repurposes several high bits of physical address as 'keyID' for memory encryption thus effectively reduces platform's maximum physical address bits. Exactly how many bits are reduced is configured by BIOS. To honor such HW behavior, the repurposed bits are reduced from cpuinfo_x86->x86_phys_bits when MKTME is detected in CPU detection. Similarly, AMD SME/SEV also reduces physical address bits for memory encryption, and cpuinfo->x86_phys_bits is reduced too when SME/SEV is detected, so for both MKTME and SME/SEV, boot_cpu_data.x86_phys_bits doesn't hold physical address bits reported by CPUID anymore. Currently KVM treats bits from boot_cpu_data.x86_phys_bits to 51 as reserved bits, but it's not true anymore for MKTME, since MKTME treats those reduced bits as 'keyID', but not reserved bits. Therefore boot_cpu_data.x86_phys_bits cannot be used to calculate reserved bits anymore, although we can still use it for AMD SME/SEV since SME/SEV treats the reduced bits differently -- they are treated as reserved bits, the same as other reserved bits in page table entity [1]. Fix by introducing a new 'shadow_phys_bits' variable in KVM x86 MMU code to store the effective physical bits w/o reserved bits -- for MKTME, it equals to physical address reported by CPUID, and for SME/SEV, it is boot_cpu_data.x86_phys_bits. Note that for the physical address bits reported to guest should remain unchanged -- KVM should report physical address reported by CPUID to guest, but not boot_cpu_data.x86_phys_bits. Because for Intel MKTME, there's no harm if guest sets up 'keyID' bits in guest page table (since MKTME only works at physical address level), and KVM doesn't even expose MKTME to guest. Arguably, for AMD SME/SEV, guest is aware of SEV thus it should adjust boot_cpu_data.x86_phys_bits when it detects SEV, therefore KVM should still reports physcial address reported by CPUID to guest. Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kai Huang <kai.huang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-03 18:08:53 +08:00
shadow_phys_bits,
context->shadow_root_level, false,
boot_cpu_has(X86_FEATURE_GBPAGES),
true, true);
else
__reset_rsvds_bits_mask_ept(shadow_zero_check,
kvm: x86: Fix reserved bits related calculation errors caused by MKTME Intel MKTME repurposes several high bits of physical address as 'keyID' for memory encryption thus effectively reduces platform's maximum physical address bits. Exactly how many bits are reduced is configured by BIOS. To honor such HW behavior, the repurposed bits are reduced from cpuinfo_x86->x86_phys_bits when MKTME is detected in CPU detection. Similarly, AMD SME/SEV also reduces physical address bits for memory encryption, and cpuinfo->x86_phys_bits is reduced too when SME/SEV is detected, so for both MKTME and SME/SEV, boot_cpu_data.x86_phys_bits doesn't hold physical address bits reported by CPUID anymore. Currently KVM treats bits from boot_cpu_data.x86_phys_bits to 51 as reserved bits, but it's not true anymore for MKTME, since MKTME treats those reduced bits as 'keyID', but not reserved bits. Therefore boot_cpu_data.x86_phys_bits cannot be used to calculate reserved bits anymore, although we can still use it for AMD SME/SEV since SME/SEV treats the reduced bits differently -- they are treated as reserved bits, the same as other reserved bits in page table entity [1]. Fix by introducing a new 'shadow_phys_bits' variable in KVM x86 MMU code to store the effective physical bits w/o reserved bits -- for MKTME, it equals to physical address reported by CPUID, and for SME/SEV, it is boot_cpu_data.x86_phys_bits. Note that for the physical address bits reported to guest should remain unchanged -- KVM should report physical address reported by CPUID to guest, but not boot_cpu_data.x86_phys_bits. Because for Intel MKTME, there's no harm if guest sets up 'keyID' bits in guest page table (since MKTME only works at physical address level), and KVM doesn't even expose MKTME to guest. Arguably, for AMD SME/SEV, guest is aware of SEV thus it should adjust boot_cpu_data.x86_phys_bits when it detects SEV, therefore KVM should still reports physcial address reported by CPUID to guest. Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kai Huang <kai.huang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-03 18:08:53 +08:00
shadow_phys_bits,
false);
if (!shadow_me_mask)
return;
for (i = context->shadow_root_level; --i >= 0;) {
shadow_zero_check->rsvd_bits_mask[0][i] &= ~shadow_me_mask;
shadow_zero_check->rsvd_bits_mask[1][i] &= ~shadow_me_mask;
}
}
/*
* as the comments in reset_shadow_zero_bits_mask() except it
* is the shadow page table for intel nested guest.
*/
static void
reset_ept_shadow_zero_bits_mask(struct kvm_vcpu *vcpu,
struct kvm_mmu *context, bool execonly)
{
__reset_rsvds_bits_mask_ept(&context->shadow_zero_check,
kvm: x86: Fix reserved bits related calculation errors caused by MKTME Intel MKTME repurposes several high bits of physical address as 'keyID' for memory encryption thus effectively reduces platform's maximum physical address bits. Exactly how many bits are reduced is configured by BIOS. To honor such HW behavior, the repurposed bits are reduced from cpuinfo_x86->x86_phys_bits when MKTME is detected in CPU detection. Similarly, AMD SME/SEV also reduces physical address bits for memory encryption, and cpuinfo->x86_phys_bits is reduced too when SME/SEV is detected, so for both MKTME and SME/SEV, boot_cpu_data.x86_phys_bits doesn't hold physical address bits reported by CPUID anymore. Currently KVM treats bits from boot_cpu_data.x86_phys_bits to 51 as reserved bits, but it's not true anymore for MKTME, since MKTME treats those reduced bits as 'keyID', but not reserved bits. Therefore boot_cpu_data.x86_phys_bits cannot be used to calculate reserved bits anymore, although we can still use it for AMD SME/SEV since SME/SEV treats the reduced bits differently -- they are treated as reserved bits, the same as other reserved bits in page table entity [1]. Fix by introducing a new 'shadow_phys_bits' variable in KVM x86 MMU code to store the effective physical bits w/o reserved bits -- for MKTME, it equals to physical address reported by CPUID, and for SME/SEV, it is boot_cpu_data.x86_phys_bits. Note that for the physical address bits reported to guest should remain unchanged -- KVM should report physical address reported by CPUID to guest, but not boot_cpu_data.x86_phys_bits. Because for Intel MKTME, there's no harm if guest sets up 'keyID' bits in guest page table (since MKTME only works at physical address level), and KVM doesn't even expose MKTME to guest. Arguably, for AMD SME/SEV, guest is aware of SEV thus it should adjust boot_cpu_data.x86_phys_bits when it detects SEV, therefore KVM should still reports physcial address reported by CPUID to guest. Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kai Huang <kai.huang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-03 18:08:53 +08:00
shadow_phys_bits, execonly);
}
#define BYTE_MASK(access) \
((1 & (access) ? 2 : 0) | \
(2 & (access) ? 4 : 0) | \
(3 & (access) ? 8 : 0) | \
(4 & (access) ? 16 : 0) | \
(5 & (access) ? 32 : 0) | \
(6 & (access) ? 64 : 0) | \
(7 & (access) ? 128 : 0))
static void update_permission_bitmask(struct kvm_vcpu *vcpu,
struct kvm_mmu *mmu, bool ept)
{
unsigned byte;
const u8 x = BYTE_MASK(ACC_EXEC_MASK);
const u8 w = BYTE_MASK(ACC_WRITE_MASK);
const u8 u = BYTE_MASK(ACC_USER_MASK);
bool cr4_smep = kvm_read_cr4_bits(vcpu, X86_CR4_SMEP) != 0;
bool cr4_smap = kvm_read_cr4_bits(vcpu, X86_CR4_SMAP) != 0;
bool cr0_wp = is_write_protection(vcpu);
for (byte = 0; byte < ARRAY_SIZE(mmu->permissions); ++byte) {
unsigned pfec = byte << 1;
/*
* Each "*f" variable has a 1 bit for each UWX value
* that causes a fault with the given PFEC.
*/
/* Faults from writes to non-writable pages */
u8 wf = (pfec & PFERR_WRITE_MASK) ? (u8)~w : 0;
/* Faults from user mode accesses to supervisor pages */
u8 uf = (pfec & PFERR_USER_MASK) ? (u8)~u : 0;
/* Faults from fetches of non-executable pages*/
u8 ff = (pfec & PFERR_FETCH_MASK) ? (u8)~x : 0;
/* Faults from kernel mode fetches of user pages */
u8 smepf = 0;
/* Faults from kernel mode accesses of user pages */
u8 smapf = 0;
if (!ept) {
/* Faults from kernel mode accesses to user pages */
u8 kf = (pfec & PFERR_USER_MASK) ? 0 : u;
/* Not really needed: !nx will cause pte.nx to fault */
if (!mmu->nx)
ff = 0;
/* Allow supervisor writes if !cr0.wp */
if (!cr0_wp)
wf = (pfec & PFERR_USER_MASK) ? wf : 0;
/* Disallow supervisor fetches of user code if cr4.smep */
if (cr4_smep)
smepf = (pfec & PFERR_FETCH_MASK) ? kf : 0;
/*
* SMAP:kernel-mode data accesses from user-mode
* mappings should fault. A fault is considered
* as a SMAP violation if all of the following
* conditions are true:
* - X86_CR4_SMAP is set in CR4
* - A user page is accessed
* - The access is not a fetch
* - Page fault in kernel mode
* - if CPL = 3 or X86_EFLAGS_AC is clear
*
* Here, we cover the first three conditions.
* The fourth is computed dynamically in permission_fault();
* PFERR_RSVD_MASK bit will be set in PFEC if the access is
* *not* subject to SMAP restrictions.
*/
if (cr4_smap)
smapf = (pfec & (PFERR_RSVD_MASK|PFERR_FETCH_MASK)) ? 0 : kf;
}
mmu->permissions[byte] = ff | uf | wf | smepf | smapf;
}
}
/*
* PKU is an additional mechanism by which the paging controls access to
* user-mode addresses based on the value in the PKRU register. Protection
* key violations are reported through a bit in the page fault error code.
* Unlike other bits of the error code, the PK bit is not known at the
* call site of e.g. gva_to_gpa; it must be computed directly in
* permission_fault based on two bits of PKRU, on some machine state (CR4,
* CR0, EFER, CPL), and on other bits of the error code and the page tables.
*
* In particular the following conditions come from the error code, the
* page tables and the machine state:
* - PK is always zero unless CR4.PKE=1 and EFER.LMA=1
* - PK is always zero if RSVD=1 (reserved bit set) or F=1 (instruction fetch)
* - PK is always zero if U=0 in the page tables
* - PKRU.WD is ignored if CR0.WP=0 and the access is a supervisor access.
*
* The PKRU bitmask caches the result of these four conditions. The error
* code (minus the P bit) and the page table's U bit form an index into the
* PKRU bitmask. Two bits of the PKRU bitmask are then extracted and ANDed
* with the two bits of the PKRU register corresponding to the protection key.
* For the first three conditions above the bits will be 00, thus masking
* away both AD and WD. For all reads or if the last condition holds, WD
* only will be masked away.
*/
static void update_pkru_bitmask(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
bool ept)
{
unsigned bit;
bool wp;
if (ept) {
mmu->pkru_mask = 0;
return;
}
/* PKEY is enabled only if CR4.PKE and EFER.LMA are both set. */
if (!kvm_read_cr4_bits(vcpu, X86_CR4_PKE) || !is_long_mode(vcpu)) {
mmu->pkru_mask = 0;
return;
}
wp = is_write_protection(vcpu);
for (bit = 0; bit < ARRAY_SIZE(mmu->permissions); ++bit) {
unsigned pfec, pkey_bits;
bool check_pkey, check_write, ff, uf, wf, pte_user;
pfec = bit << 1;
ff = pfec & PFERR_FETCH_MASK;
uf = pfec & PFERR_USER_MASK;
wf = pfec & PFERR_WRITE_MASK;
/* PFEC.RSVD is replaced by ACC_USER_MASK. */
pte_user = pfec & PFERR_RSVD_MASK;
/*
* Only need to check the access which is not an
* instruction fetch and is to a user page.
*/
check_pkey = (!ff && pte_user);
/*
* write access is controlled by PKRU if it is a
* user access or CR0.WP = 1.
*/
check_write = check_pkey && wf && (uf || wp);
/* PKRU.AD stops both read and write access. */
pkey_bits = !!check_pkey;
/* PKRU.WD stops write access. */
pkey_bits |= (!!check_write) << 1;
mmu->pkru_mask |= (pkey_bits & 3) << pfec;
}
}
static void update_last_nonleaf_level(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu)
{
unsigned root_level = mmu->root_level;
mmu->last_nonleaf_level = root_level;
if (root_level == PT32_ROOT_LEVEL && is_pse(vcpu))
mmu->last_nonleaf_level++;
}
static void paging64_init_context_common(struct kvm_vcpu *vcpu,
struct kvm_mmu *context,
int level)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
context->nx = is_nx(vcpu);
context->root_level = level;
reset_rsvds_bits_mask(vcpu, context);
update_permission_bitmask(vcpu, context, false);
update_pkru_bitmask(vcpu, context, false);
update_last_nonleaf_level(vcpu, context);
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
MMU_WARN_ON(!is_pae(vcpu));
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
context->page_fault = paging64_page_fault;
context->gva_to_gpa = paging64_gva_to_gpa;
context->sync_page = paging64_sync_page;
context->invlpg = paging64_invlpg;
context->update_pte = paging64_update_pte;
context->shadow_root_level = level;
context->direct_map = false;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
static void paging64_init_context(struct kvm_vcpu *vcpu,
struct kvm_mmu *context)
{
int root_level = is_la57_mode(vcpu) ?
PT64_ROOT_5LEVEL : PT64_ROOT_4LEVEL;
paging64_init_context_common(vcpu, context, root_level);
}
static void paging32_init_context(struct kvm_vcpu *vcpu,
struct kvm_mmu *context)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
context->nx = false;
context->root_level = PT32_ROOT_LEVEL;
reset_rsvds_bits_mask(vcpu, context);
update_permission_bitmask(vcpu, context, false);
update_pkru_bitmask(vcpu, context, false);
update_last_nonleaf_level(vcpu, context);
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
context->page_fault = paging32_page_fault;
context->gva_to_gpa = paging32_gva_to_gpa;
context->sync_page = paging32_sync_page;
context->invlpg = paging32_invlpg;
context->update_pte = paging32_update_pte;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
context->shadow_root_level = PT32E_ROOT_LEVEL;
context->direct_map = false;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
static void paging32E_init_context(struct kvm_vcpu *vcpu,
struct kvm_mmu *context)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
paging64_init_context_common(vcpu, context, PT32E_ROOT_LEVEL);
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
static union kvm_mmu_extended_role kvm_calc_mmu_role_ext(struct kvm_vcpu *vcpu)
{
union kvm_mmu_extended_role ext = {0};
ext.cr0_pg = !!is_paging(vcpu);
ext.cr4_pae = !!is_pae(vcpu);
ext.cr4_smep = !!kvm_read_cr4_bits(vcpu, X86_CR4_SMEP);
ext.cr4_smap = !!kvm_read_cr4_bits(vcpu, X86_CR4_SMAP);
ext.cr4_pse = !!is_pse(vcpu);
ext.cr4_pke = !!kvm_read_cr4_bits(vcpu, X86_CR4_PKE);
ext.maxphyaddr = cpuid_maxphyaddr(vcpu);
ext.valid = 1;
return ext;
}
static union kvm_mmu_role kvm_calc_mmu_role_common(struct kvm_vcpu *vcpu,
bool base_only)
{
union kvm_mmu_role role = {0};
role.base.access = ACC_ALL;
role.base.nxe = !!is_nx(vcpu);
role.base.cr0_wp = is_write_protection(vcpu);
role.base.smm = is_smm(vcpu);
role.base.guest_mode = is_guest_mode(vcpu);
if (base_only)
return role;
role.ext = kvm_calc_mmu_role_ext(vcpu);
return role;
}
static inline int kvm_mmu_get_tdp_level(struct kvm_vcpu *vcpu)
{
/* Use 5-level TDP if and only if it's useful/necessary. */
if (max_tdp_level == 5 && cpuid_maxphyaddr(vcpu) <= 48)
return 4;
return max_tdp_level;
}
static union kvm_mmu_role
kvm_calc_tdp_mmu_root_page_role(struct kvm_vcpu *vcpu, bool base_only)
{
union kvm_mmu_role role = kvm_calc_mmu_role_common(vcpu, base_only);
role.base.ad_disabled = (shadow_accessed_mask == 0);
role.base.level = kvm_mmu_get_tdp_level(vcpu);
role.base.direct = true;
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-08 07:27:44 +08:00
role.base.gpte_is_8_bytes = true;
return role;
}
static void init_kvm_tdp_mmu(struct kvm_vcpu *vcpu)
{
struct kvm_mmu *context = &vcpu->arch.root_mmu;
union kvm_mmu_role new_role =
kvm_calc_tdp_mmu_root_page_role(vcpu, false);
if (new_role.as_u64 == context->mmu_role.as_u64)
return;
context->mmu_role.as_u64 = new_role.as_u64;
context->page_fault = kvm_tdp_page_fault;
context->sync_page = nonpaging_sync_page;
context->invlpg = NULL;
context->update_pte = nonpaging_update_pte;
context->shadow_root_level = kvm_mmu_get_tdp_level(vcpu);
context->direct_map = true;
context->get_guest_pgd = get_cr3;
context->get_pdptr = kvm_pdptr_read;
context->inject_page_fault = kvm_inject_page_fault;
if (!is_paging(vcpu)) {
context->nx = false;
context->gva_to_gpa = nonpaging_gva_to_gpa;
context->root_level = 0;
} else if (is_long_mode(vcpu)) {
context->nx = is_nx(vcpu);
context->root_level = is_la57_mode(vcpu) ?
PT64_ROOT_5LEVEL : PT64_ROOT_4LEVEL;
reset_rsvds_bits_mask(vcpu, context);
context->gva_to_gpa = paging64_gva_to_gpa;
} else if (is_pae(vcpu)) {
context->nx = is_nx(vcpu);
context->root_level = PT32E_ROOT_LEVEL;
reset_rsvds_bits_mask(vcpu, context);
context->gva_to_gpa = paging64_gva_to_gpa;
} else {
context->nx = false;
context->root_level = PT32_ROOT_LEVEL;
reset_rsvds_bits_mask(vcpu, context);
context->gva_to_gpa = paging32_gva_to_gpa;
}
update_permission_bitmask(vcpu, context, false);
update_pkru_bitmask(vcpu, context, false);
update_last_nonleaf_level(vcpu, context);
reset_tdp_shadow_zero_bits_mask(vcpu, context);
}
static union kvm_mmu_role
kvm_calc_shadow_root_page_role_common(struct kvm_vcpu *vcpu, bool base_only)
{
union kvm_mmu_role role = kvm_calc_mmu_role_common(vcpu, base_only);
role.base.smep_andnot_wp = role.ext.cr4_smep &&
!is_write_protection(vcpu);
role.base.smap_andnot_wp = role.ext.cr4_smap &&
!is_write_protection(vcpu);
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-08 07:27:44 +08:00
role.base.gpte_is_8_bytes = !!is_pae(vcpu);
return role;
}
static union kvm_mmu_role
kvm_calc_shadow_mmu_root_page_role(struct kvm_vcpu *vcpu, bool base_only)
{
union kvm_mmu_role role =
kvm_calc_shadow_root_page_role_common(vcpu, base_only);
role.base.direct = !is_paging(vcpu);
if (!is_long_mode(vcpu))
role.base.level = PT32E_ROOT_LEVEL;
else if (is_la57_mode(vcpu))
role.base.level = PT64_ROOT_5LEVEL;
else
role.base.level = PT64_ROOT_4LEVEL;
return role;
}
static void shadow_mmu_init_context(struct kvm_vcpu *vcpu, struct kvm_mmu *context,
u32 cr0, u32 cr4, u32 efer,
union kvm_mmu_role new_role)
{
if (!(cr0 & X86_CR0_PG))
nonpaging_init_context(vcpu, context);
else if (efer & EFER_LMA)
paging64_init_context(vcpu, context);
else if (cr4 & X86_CR4_PAE)
paging32E_init_context(vcpu, context);
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
else
paging32_init_context(vcpu, context);
context->mmu_role.as_u64 = new_role.as_u64;
reset_shadow_zero_bits_mask(vcpu, context);
}
static void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu, u32 cr0, u32 cr4, u32 efer)
{
struct kvm_mmu *context = &vcpu->arch.root_mmu;
union kvm_mmu_role new_role =
kvm_calc_shadow_mmu_root_page_role(vcpu, false);
if (new_role.as_u64 != context->mmu_role.as_u64)
shadow_mmu_init_context(vcpu, context, cr0, cr4, efer, new_role);
}
static union kvm_mmu_role
kvm_calc_shadow_npt_root_page_role(struct kvm_vcpu *vcpu)
{
union kvm_mmu_role role =
kvm_calc_shadow_root_page_role_common(vcpu, false);
role.base.direct = false;
role.base.level = kvm_mmu_get_tdp_level(vcpu);
return role;
}
void kvm_init_shadow_npt_mmu(struct kvm_vcpu *vcpu, u32 cr0, u32 cr4, u32 efer,
gpa_t nested_cr3)
{
struct kvm_mmu *context = &vcpu->arch.guest_mmu;
union kvm_mmu_role new_role = kvm_calc_shadow_npt_root_page_role(vcpu);
context->shadow_root_level = new_role.base.level;
__kvm_mmu_new_pgd(vcpu, nested_cr3, new_role.base, false, false);
if (new_role.as_u64 != context->mmu_role.as_u64)
shadow_mmu_init_context(vcpu, context, cr0, cr4, efer, new_role);
}
EXPORT_SYMBOL_GPL(kvm_init_shadow_npt_mmu);
static union kvm_mmu_role
kvm_calc_shadow_ept_root_page_role(struct kvm_vcpu *vcpu, bool accessed_dirty,
bool execonly, u8 level)
{
union kvm_mmu_role role = {0};
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-08 07:27:44 +08:00
/* SMM flag is inherited from root_mmu */
role.base.smm = vcpu->arch.root_mmu.mmu_role.base.smm;
role.base.level = level;
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-08 07:27:44 +08:00
role.base.gpte_is_8_bytes = true;
role.base.direct = false;
role.base.ad_disabled = !accessed_dirty;
role.base.guest_mode = true;
role.base.access = ACC_ALL;
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-08 07:27:44 +08:00
/*
* WP=1 and NOT_WP=1 is an impossible combination, use WP and the
* SMAP variation to denote shadow EPT entries.
*/
role.base.cr0_wp = true;
role.base.smap_andnot_wp = true;
role.ext = kvm_calc_mmu_role_ext(vcpu);
role.ext.execonly = execonly;
return role;
}
void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly,
bool accessed_dirty, gpa_t new_eptp)
{
struct kvm_mmu *context = &vcpu->arch.guest_mmu;
u8 level = vmx_eptp_page_walk_level(new_eptp);
union kvm_mmu_role new_role =
kvm_calc_shadow_ept_root_page_role(vcpu, accessed_dirty,
execonly, level);
__kvm_mmu_new_pgd(vcpu, new_eptp, new_role.base, true, true);
if (new_role.as_u64 == context->mmu_role.as_u64)
return;
context->shadow_root_level = level;
context->nx = true;
context->ept_ad = accessed_dirty;
context->page_fault = ept_page_fault;
context->gva_to_gpa = ept_gva_to_gpa;
context->sync_page = ept_sync_page;
context->invlpg = ept_invlpg;
context->update_pte = ept_update_pte;
context->root_level = level;
context->direct_map = false;
context->mmu_role.as_u64 = new_role.as_u64;
update_permission_bitmask(vcpu, context, true);
update_pkru_bitmask(vcpu, context, true);
update_last_nonleaf_level(vcpu, context);
reset_rsvds_bits_mask_ept(vcpu, context, execonly);
reset_ept_shadow_zero_bits_mask(vcpu, context, execonly);
}
EXPORT_SYMBOL_GPL(kvm_init_shadow_ept_mmu);
static void init_kvm_softmmu(struct kvm_vcpu *vcpu)
{
struct kvm_mmu *context = &vcpu->arch.root_mmu;
kvm_init_shadow_mmu(vcpu,
kvm_read_cr0_bits(vcpu, X86_CR0_PG),
kvm_read_cr4_bits(vcpu, X86_CR4_PAE),
vcpu->arch.efer);
context->get_guest_pgd = get_cr3;
context->get_pdptr = kvm_pdptr_read;
context->inject_page_fault = kvm_inject_page_fault;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
static void init_kvm_nested_mmu(struct kvm_vcpu *vcpu)
{
union kvm_mmu_role new_role = kvm_calc_mmu_role_common(vcpu, false);
struct kvm_mmu *g_context = &vcpu->arch.nested_mmu;
if (new_role.as_u64 == g_context->mmu_role.as_u64)
return;
g_context->mmu_role.as_u64 = new_role.as_u64;
g_context->get_guest_pgd = get_cr3;
g_context->get_pdptr = kvm_pdptr_read;
g_context->inject_page_fault = kvm_inject_page_fault;
/*
* L2 page tables are never shadowed, so there is no need to sync
* SPTEs.
*/
g_context->invlpg = NULL;
/*
* Note that arch.mmu->gva_to_gpa translates l2_gpa to l1_gpa using
* L1's nested page tables (e.g. EPT12). The nested translation
* of l2_gva to l1_gpa is done by arch.nested_mmu.gva_to_gpa using
* L2's page tables as the first level of translation and L1's
* nested page tables as the second level of translation. Basically
* the gva_to_gpa functions between mmu and nested_mmu are swapped.
*/
if (!is_paging(vcpu)) {
g_context->nx = false;
g_context->root_level = 0;
g_context->gva_to_gpa = nonpaging_gva_to_gpa_nested;
} else if (is_long_mode(vcpu)) {
g_context->nx = is_nx(vcpu);
g_context->root_level = is_la57_mode(vcpu) ?
PT64_ROOT_5LEVEL : PT64_ROOT_4LEVEL;
reset_rsvds_bits_mask(vcpu, g_context);
g_context->gva_to_gpa = paging64_gva_to_gpa_nested;
} else if (is_pae(vcpu)) {
g_context->nx = is_nx(vcpu);
g_context->root_level = PT32E_ROOT_LEVEL;
reset_rsvds_bits_mask(vcpu, g_context);
g_context->gva_to_gpa = paging64_gva_to_gpa_nested;
} else {
g_context->nx = false;
g_context->root_level = PT32_ROOT_LEVEL;
reset_rsvds_bits_mask(vcpu, g_context);
g_context->gva_to_gpa = paging32_gva_to_gpa_nested;
}
update_permission_bitmask(vcpu, g_context, false);
update_pkru_bitmask(vcpu, g_context, false);
update_last_nonleaf_level(vcpu, g_context);
}
void kvm_init_mmu(struct kvm_vcpu *vcpu, bool reset_roots)
{
if (reset_roots) {
uint i;
vcpu->arch.mmu->root_hpa = INVALID_PAGE;
for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
vcpu->arch.mmu->prev_roots[i] = KVM_MMU_ROOT_INFO_INVALID;
}
if (mmu_is_nested(vcpu))
init_kvm_nested_mmu(vcpu);
else if (tdp_enabled)
init_kvm_tdp_mmu(vcpu);
else
init_kvm_softmmu(vcpu);
}
EXPORT_SYMBOL_GPL(kvm_init_mmu);
static union kvm_mmu_page_role
kvm_mmu_calc_root_page_role(struct kvm_vcpu *vcpu)
{
union kvm_mmu_role role;
if (tdp_enabled)
role = kvm_calc_tdp_mmu_root_page_role(vcpu, true);
else
role = kvm_calc_shadow_mmu_root_page_role(vcpu, true);
return role.base;
}
void kvm_mmu_reset_context(struct kvm_vcpu *vcpu)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
kvm_mmu_unload(vcpu);
kvm_init_mmu(vcpu, true);
}
EXPORT_SYMBOL_GPL(kvm_mmu_reset_context);
int kvm_mmu_load(struct kvm_vcpu *vcpu)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
int r;
r = mmu_topup_memory_caches(vcpu, !vcpu->arch.mmu->direct_map);
if (r)
goto out;
r = mmu_alloc_roots(vcpu);
kvm_mmu_sync_roots(vcpu);
if (r)
goto out;
kvm_mmu_load_pgd(vcpu);
kvm_x86_ops.tlb_flush_current(vcpu);
out:
return r;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
EXPORT_SYMBOL_GPL(kvm_mmu_load);
void kvm_mmu_unload(struct kvm_vcpu *vcpu)
{
kvm_mmu_free_roots(vcpu, &vcpu->arch.root_mmu, KVM_MMU_ROOTS_ALL);
WARN_ON(VALID_PAGE(vcpu->arch.root_mmu.root_hpa));
kvm_mmu_free_roots(vcpu, &vcpu->arch.guest_mmu, KVM_MMU_ROOTS_ALL);
WARN_ON(VALID_PAGE(vcpu->arch.guest_mmu.root_hpa));
}
EXPORT_SYMBOL_GPL(kvm_mmu_unload);
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu,
struct kvm_mmu_page *sp, u64 *spte,
const void *new)
{
if (sp->role.level != PG_LEVEL_4K) {
++vcpu->kvm->stat.mmu_pde_zapped;
return;
}
++vcpu->kvm->stat.mmu_pte_updated;
vcpu->arch.mmu->update_pte(vcpu, sp, spte, new);
}
static bool need_remote_flush(u64 old, u64 new)
{
if (!is_shadow_present_pte(old))
return false;
if (!is_shadow_present_pte(new))
return true;
if ((old ^ new) & PT64_BASE_ADDR_MASK)
return true;
old ^= shadow_nx_mask;
new ^= shadow_nx_mask;
return (old & ~new & PT64_PERM_MASK) != 0;
}
static u64 mmu_pte_write_fetch_gpte(struct kvm_vcpu *vcpu, gpa_t *gpa,
int *bytes)
{
u64 gentry = 0;
int r;
/*
* Assume that the pte write on a page table of the same type
* as the current vcpu paging mode since we update the sptes only
* when they have the same mode.
*/
if (is_pae(vcpu) && *bytes == 4) {
/* Handle a 32-bit guest writing two halves of a 64-bit gpte */
*gpa &= ~(gpa_t)7;
*bytes = 8;
}
if (*bytes == 4 || *bytes == 8) {
r = kvm_vcpu_read_guest_atomic(vcpu, *gpa, &gentry, *bytes);
if (r)
gentry = 0;
}
return gentry;
}
/*
* If we're seeing too many writes to a page, it may no longer be a page table,
* or we may be forking, in which case it is better to unmap the page.
*/
static bool detect_write_flooding(struct kvm_mmu_page *sp)
{
/*
* Skip write-flooding detected for the sp whose level is 1, because
* it can become unsync, then the guest page is not write-protected.
*/
if (sp->role.level == PG_LEVEL_4K)
return false;
atomic_inc(&sp->write_flooding_count);
return atomic_read(&sp->write_flooding_count) >= 3;
}
/*
* Misaligned accesses are too much trouble to fix up; also, they usually
* indicate a page is not used as a page table.
*/
static bool detect_write_misaligned(struct kvm_mmu_page *sp, gpa_t gpa,
int bytes)
{
unsigned offset, pte_size, misaligned;
pgprintk("misaligned: gpa %llx bytes %d role %x\n",
gpa, bytes, sp->role.word);
offset = offset_in_page(gpa);
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-08 07:27:44 +08:00
pte_size = sp->role.gpte_is_8_bytes ? 8 : 4;
/*
* Sometimes, the OS only writes the last one bytes to update status
* bits, for example, in linux, andb instruction is used in clear_bit().
*/
if (!(offset & (pte_size - 1)) && bytes == 1)
return false;
misaligned = (offset ^ (offset + bytes - 1)) & ~(pte_size - 1);
misaligned |= bytes < 4;
return misaligned;
}
static u64 *get_written_sptes(struct kvm_mmu_page *sp, gpa_t gpa, int *nspte)
{
unsigned page_offset, quadrant;
u64 *spte;
int level;
page_offset = offset_in_page(gpa);
level = sp->role.level;
*nspte = 1;
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size' The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-08 07:27:44 +08:00
if (!sp->role.gpte_is_8_bytes) {
page_offset <<= 1; /* 32->64 */
/*
* A 32-bit pde maps 4MB while the shadow pdes map
* only 2MB. So we need to double the offset again
* and zap two pdes instead of one.
*/
if (level == PT32_ROOT_LEVEL) {
page_offset &= ~7; /* kill rounding error */
page_offset <<= 1;
*nspte = 2;
}
quadrant = page_offset >> PAGE_SHIFT;
page_offset &= ~PAGE_MASK;
if (quadrant != sp->role.quadrant)
return NULL;
}
spte = &sp->spt[page_offset / sizeof(*spte)];
return spte;
}
/*
* Ignore various flags when determining if a SPTE can be immediately
* overwritten for the current MMU.
* - level: explicitly checked in mmu_pte_write_new_pte(), and will never
* match the current MMU role, as MMU's level tracks the root level.
* - access: updated based on the new guest PTE
* - quadrant: handled by get_written_sptes()
* - invalid: always false (loop only walks valid shadow pages)
*/
static const union kvm_mmu_page_role role_ign = {
.level = 0xf,
.access = 0x7,
.quadrant = 0x3,
.invalid = 0x1,
};
static void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
const u8 *new, int bytes,
struct kvm_page_track_notifier_node *node)
{
gfn_t gfn = gpa >> PAGE_SHIFT;
struct kvm_mmu_page *sp;
LIST_HEAD(invalid_list);
u64 entry, gentry, *spte;
int npte;
bool remote_flush, local_flush;
/*
* If we don't have indirect shadow pages, it means no page is
* write-protected, so we can exit simply.
*/
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24 05:07:29 +08:00
if (!READ_ONCE(vcpu->kvm->arch.indirect_shadow_pages))
return;
remote_flush = local_flush = false;
pgprintk("%s: gpa %llx bytes %d\n", __func__, gpa, bytes);
/*
* No need to care whether allocation memory is successful
* or not since pte prefetch is skiped if it does not have
* enough objects in the cache.
*/
mmu_topup_memory_caches(vcpu, true);
spin_lock(&vcpu->kvm->mmu_lock);
gentry = mmu_pte_write_fetch_gpte(vcpu, &gpa, &bytes);
++vcpu->kvm->stat.mmu_pte_write;
kvm_mmu_audit(vcpu, AUDIT_PRE_PTE_WRITE);
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
for_each_gfn_indirect_valid_sp(vcpu->kvm, sp, gfn) {
if (detect_write_misaligned(sp, gpa, bytes) ||
detect_write_flooding(sp)) {
kvm_mmu_prepare_zap_page(vcpu->kvm, sp, &invalid_list);
++vcpu->kvm->stat.mmu_flooded;
continue;
}
spte = get_written_sptes(sp, gpa, &npte);
if (!spte)
continue;
local_flush = true;
while (npte--) {
u32 base_role = vcpu->arch.mmu->mmu_role.base.word;
entry = *spte;
KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent Recursively zap all to-be-orphaned children, unsynced or otherwise, when zapping a shadow page for a nested TDP MMU. KVM currently only zaps the unsynced child pages, but not the synced ones. This can create problems over time when running many nested guests because it leaves unlinked pages which will not be freed until the page quota is hit. With the default page quota of 20 shadow pages per 1000 guest pages, this looks like a memory leak and can degrade MMU performance. In a recent benchmark, substantial performance degradation was observed: An L1 guest was booted with 64G memory. 2G nested Windows guests were booted, 10 at a time for 20 iterations. (200 total boots) Windows was used in this benchmark because they touch all of their memory on startup. By the end of the benchmark, the nested guests were taking ~10% longer to boot. With this patch there is no degradation in boot time. Without this patch the benchmark ends with hundreds of thousands of stale EPT02 pages cluttering up rmaps and the page hash map. As a result, VM shutdown is also much slower: deleting memslot 0 was observed to take over a minute. With this patch it takes just a few miliseconds. Cc: Peter Shier <pshier@google.com> Signed-off-by: Ben Gardon <bgardon@google.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923221406.16297-3-sean.j.christopherson@intel.com> Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-24 06:14:06 +08:00
mmu_page_zap_pte(vcpu->kvm, sp, spte, NULL);
if (gentry &&
!((sp->role.word ^ base_role) & ~role_ign.word) &&
rmap_can_add(vcpu))
mmu_pte_write_new_pte(vcpu, sp, spte, &gentry);
if (need_remote_flush(entry, *spte))
remote_flush = true;
++spte;
}
}
kvm_mmu_flush_or_zap(vcpu, &invalid_list, remote_flush, local_flush);
kvm_mmu_audit(vcpu, AUDIT_POST_PTE_WRITE);
spin_unlock(&vcpu->kvm->mmu_lock);
}
int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
{
gpa_t gpa;
int r;
if (vcpu->arch.mmu->direct_map)
return 0;
gpa = kvm_mmu_gva_to_gpa_read(vcpu, gva, NULL);
r = kvm_mmu_unprotect_page(vcpu->kvm, gpa >> PAGE_SHIFT);
return r;
}
EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt);
KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:14 +08:00
int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa, u64 error_code,
void *insn, int insn_len)
{
int r, emulation_type = EMULTYPE_PF;
bool direct = vcpu->arch.mmu->direct_map;
if (WARN_ON(!VALID_PAGE(vcpu->arch.mmu->root_hpa)))
KVM: x86/mmu: Move root_hpa validity checks to top of page fault handler Add a check on root_hpa at the beginning of the page fault handler to consolidate several checks on root_hpa that are scattered throughout the page fault code. This is a preparatory step towards eventually removing such checks altogether, or at the very least WARNing if an invalid root is encountered. Remove only the checks that can be easily audited to confirm that root_hpa cannot be invalidated between their current location and the new check in kvm_mmu_page_fault(), and aren't currently protected by mmu_lock, i.e. keep the checks in __direct_map() and FNAME(fetch) for the time being. The root_hpa checks that are consolidate were all added by commit 37f6a4e237303 ("KVM: x86: handle invalid root_hpa everywhere") which was a follow up to a bug fix for __direct_map(), commit 989c6b34f6a94 ("KVM: MMU: handle invalid root_hpa at __direct_map") At the time, nested VMX had, in hindsight, crazy handling of nested interrupts and would trigger a nested VM-Exit in ->interrupt_allowed(), and thus unexpectedly reset the MMU in flows such as can_do_async_pf(). Now that the wonky nested VM-Exit behavior is gone, the root_hpa checks are bogus and confusing, e.g. it's not at all obvious what they actually protect against, and at first glance they appear to be broken since many of them run without holding mmu_lock. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:27 +08:00
return RET_PF_RETRY;
r = RET_PF_INVALID;
if (unlikely(error_code & PFERR_RSVD_MASK)) {
KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:14 +08:00
r = handle_mmio_page_fault(vcpu, cr2_or_gpa, direct);
if (r == RET_PF_EMULATE)
goto emulate;
}
if (r == RET_PF_INVALID) {
r = kvm_mmu_do_page_fault(vcpu, cr2_or_gpa,
lower_32_bits(error_code), false);
if (WARN_ON_ONCE(r == RET_PF_INVALID))
return -EIO;
}
if (r < 0)
return r;
if (r != RET_PF_EMULATE)
return 1;
kvm: svm: Add support for additional SVM NPF error codes AMD hardware adds two additional bits to aid in nested page fault handling. Bit 32 - NPF occurred while translating the guest's final physical address Bit 33 - NPF occurred while translating the guest page tables The guest page tables fault indicator can be used as an aid for nested virtualization. Using V0 for the host, V1 for the first level guest and V2 for the second level guest, when both V1 and V2 are using nested paging there are currently a number of unnecessary instruction emulations. When V2 is launched shadow paging is used in V1 for the nested tables of V2. As a result, KVM marks these pages as RO in the host nested page tables. When V2 exits and we resume V1, these pages are still marked RO. Every nested walk for a guest page table is treated as a user-level write access and this causes a lot of NPFs because the V1 page tables are marked RO in the V0 nested tables. While executing V1, when these NPFs occur KVM sees a write to a read-only page, emulates the V1 instruction and unprotects the page (marking it RW). This patch looks for cases where we get a NPF due to a guest page table walk where the page was marked RO. It immediately unprotects the page and resumes the guest, leading to far fewer instruction emulations when nested virtualization is used. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-11-24 01:01:38 +08:00
/*
* Before emulating the instruction, check if the error code
* was due to a RO violation while translating the guest page.
* This can occur when using nested virtualization with nested
* paging in both guests. If true, we simply unprotect the page
* and resume the guest.
*/
if (vcpu->arch.mmu->direct_map &&
(error_code & PFERR_NESTED_GUEST_PAGE) == PFERR_NESTED_GUEST_PAGE) {
KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:14 +08:00
kvm_mmu_unprotect_page(vcpu->kvm, gpa_to_gfn(cr2_or_gpa));
kvm: svm: Add support for additional SVM NPF error codes AMD hardware adds two additional bits to aid in nested page fault handling. Bit 32 - NPF occurred while translating the guest's final physical address Bit 33 - NPF occurred while translating the guest page tables The guest page tables fault indicator can be used as an aid for nested virtualization. Using V0 for the host, V1 for the first level guest and V2 for the second level guest, when both V1 and V2 are using nested paging there are currently a number of unnecessary instruction emulations. When V2 is launched shadow paging is used in V1 for the nested tables of V2. As a result, KVM marks these pages as RO in the host nested page tables. When V2 exits and we resume V1, these pages are still marked RO. Every nested walk for a guest page table is treated as a user-level write access and this causes a lot of NPFs because the V1 page tables are marked RO in the V0 nested tables. While executing V1, when these NPFs occur KVM sees a write to a read-only page, emulates the V1 instruction and unprotects the page (marking it RW). This patch looks for cases where we get a NPF due to a guest page table walk where the page was marked RO. It immediately unprotects the page and resumes the guest, leading to far fewer instruction emulations when nested virtualization is used. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-11-24 01:01:38 +08:00
return 1;
}
/*
* vcpu->arch.mmu.page_fault returned RET_PF_EMULATE, but we can still
* optimistically try to just unprotect the page and let the processor
* re-execute the instruction that caused the page fault. Do not allow
* retrying MMIO emulation, as it's not only pointless but could also
* cause us to enter an infinite loop because the processor will keep
KVM: x86: Do not re-{try,execute} after failed emulation in L2 Commit a6f177efaa58 ("KVM: Reenter guest after emulation failure if due to access to non-mmio address") added reexecute_instruction() to handle the scenario where two (or more) vCPUS race to write a shadowed page, i.e. reexecute_instruction() is intended to return true if and only if the instruction being emulated was accessing a shadowed page. As L0 is only explicitly shadowing L1 tables, an emulation failure of a nested VM instruction cannot be due to a race to write a shadowed page and so should never be re-executed. This fixes an issue where an "MMIO" emulation failure[1] in L2 is all but guaranteed to result in an infinite loop when TDP is enabled. Because "cr2" is actually an L2 GPA when TDP is enabled, calling kvm_mmu_gva_to_gpa_write() to translate cr2 in the non-direct mapped case (L2 is never direct mapped) will almost always yield UNMAPPED_GVA and cause reexecute_instruction() to immediately return true. The !mmio_info_in_cache() check in kvm_mmu_page_fault() doesn't catch this case because mmio_info_in_cache() returns false for a nested MMU (the MMIO caching currently handles L1 only, e.g. to cache nested guests' GPAs we'd have to manually flush the cache when switching between VMs and when L1 updated its page tables controlling the nested guest). Way back when, commit 68be0803456b ("KVM: x86: never re-execute instruction with enabled tdp") changed reexecute_instruction() to always return false when using TDP under the assumption that KVM would only get into the emulator for MMIO. Commit 95b3cf69bdf8 ("KVM: x86: let reexecute_instruction work for tdp") effectively reverted that behavior in order to handle the scenario where emulation failed due to an access from L1 to the shadow page tables for L2, but it didn't account for the case where emulation failed in L2 with TDP enabled. All of the above logic also applies to retry_instruction(), added by commit 1cb3f3ae5a38 ("KVM: x86: retry non-page-table writing instructions"). An indefinite loop in retry_instruction() should be impossible as it protects against retrying the same instruction over and over, but it's still correct to not retry an L2 instruction in the first place. Fix the immediate issue by adding a check for a nested guest when determining whether or not to allow retry in kvm_mmu_page_fault(). In addition to fixing the immediate bug, add WARN_ON_ONCE in the retry functions since they are not designed to handle nested cases, i.e. they need to be modified even if there is some scenario in the future where we want to allow retrying a nested guest. [1] This issue was encountered after commit 3a2936dedd20 ("kvm: mmu: Don't expose private memslots to L2") changed the page fault path to return KVM_PFN_NOSLOT when translating an L2 access to a prive memslot. Returning KVM_PFN_NOSLOT is semantically correct when we want to hide a memslot from L2, i.e. there effectively is no defined memory region for L2, but it has the unfortunate side effect of making KVM think the GFN is a MMIO page, thus triggering emulation. The failure occurred with in-development code that deliberately exposed a private memslot to L2, which L2 accessed with an instruction that is not emulated by KVM. Fixes: 95b3cf69bdf8 ("KVM: x86: let reexecute_instruction work for tdp") Fixes: 1cb3f3ae5a38 ("KVM: x86: retry non-page-table writing instructions") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Jim Mattson <jmattson@google.com> Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@tencent.com> Cc: stable@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-08-24 04:56:51 +08:00
* faulting on the non-existent MMIO address. Retrying an instruction
* from a nested guest is also pointless and dangerous as we are only
* explicitly shadowing L1's page tables, i.e. unprotecting something
* for L1 isn't going to magically fix whatever issue cause L2 to fail.
*/
KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:14 +08:00
if (!mmio_info_in_cache(vcpu, cr2_or_gpa, direct) && !is_guest_mode(vcpu))
emulation_type |= EMULTYPE_ALLOW_RETRY_PF;
emulate:
KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM Convert a plethora of parameters and variables in the MMU and page fault flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM. Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical addresses. When TDP is enabled, the fault address is a guest physical address and thus can be a 64-bit value, even when both KVM and its guest are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a 64-bit field, not a natural width field. Using a gva_t for the fault address means KVM will incorrectly drop the upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to translate L2 GPAs to L1 GPAs. Opportunistically rename variables and parameters to better reflect the dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain "addr" instead of "vaddr" when the address may be either a GVA or an L2 GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid a confusing "gpa_t gva" declaration; this also sets the stage for a future patch to combing nonpaging_page_fault() and tdp_page_fault() with minimal churn. Sprinkle in a few comments to document flows where an address is known to be a GVA and thus can be safely truncated to a 32-bit value. Add WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help document such cases and detect bugs. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-07 07:57:14 +08:00
return x86_emulate_instruction(vcpu, cr2_or_gpa, emulation_type, insn,
insn_len);
}
EXPORT_SYMBOL_GPL(kvm_mmu_page_fault);
void kvm_mmu_invalidate_gva(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
gva_t gva, hpa_t root_hpa)
{
int i;
/* It's actually a GPA for vcpu->arch.guest_mmu. */
if (mmu != &vcpu->arch.guest_mmu) {
/* INVLPG on a non-canonical address is a NOP according to the SDM. */
if (is_noncanonical_address(gva, vcpu))
return;
kvm_x86_ops.tlb_flush_gva(vcpu, gva);
}
if (!mmu->invlpg)
return;
if (root_hpa == INVALID_PAGE) {
mmu->invlpg(vcpu, gva, mmu->root_hpa);
/*
* INVLPG is required to invalidate any global mappings for the VA,
* irrespective of PCID. Since it would take us roughly similar amount
* of work to determine whether any of the prev_root mappings of the VA
* is marked global, or to just sync it blindly, so we might as well
* just always sync it.
*
* Mappings not reachable via the current cr3 or the prev_roots will be
* synced when switching to that cr3, so nothing needs to be done here
* for them.
*/
for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
if (VALID_PAGE(mmu->prev_roots[i].hpa))
mmu->invlpg(vcpu, gva, mmu->prev_roots[i].hpa);
} else {
mmu->invlpg(vcpu, gva, root_hpa);
}
}
EXPORT_SYMBOL_GPL(kvm_mmu_invalidate_gva);
void kvm_mmu_invlpg(struct kvm_vcpu *vcpu, gva_t gva)
{
kvm_mmu_invalidate_gva(vcpu, vcpu->arch.mmu, gva, INVALID_PAGE);
++vcpu->stat.invlpg;
}
EXPORT_SYMBOL_GPL(kvm_mmu_invlpg);
void kvm_mmu_invpcid_gva(struct kvm_vcpu *vcpu, gva_t gva, unsigned long pcid)
{
struct kvm_mmu *mmu = vcpu->arch.mmu;
bool tlb_flush = false;
uint i;
if (pcid == kvm_get_active_pcid(vcpu)) {
mmu->invlpg(vcpu, gva, mmu->root_hpa);
tlb_flush = true;
}
for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++) {
if (VALID_PAGE(mmu->prev_roots[i].hpa) &&
pcid == kvm_get_pcid(vcpu, mmu->prev_roots[i].pgd)) {
mmu->invlpg(vcpu, gva, mmu->prev_roots[i].hpa);
tlb_flush = true;
}
}
if (tlb_flush)
kvm_x86_ops.tlb_flush_gva(vcpu, gva);
++vcpu->stat.invlpg;
/*
* Mappings not reachable via the current cr3 or the prev_roots will be
* synced when switching to that cr3, so nothing needs to be done here
* for them.
*/
}
EXPORT_SYMBOL_GPL(kvm_mmu_invpcid_gva);
void kvm_configure_mmu(bool enable_tdp, int tdp_max_root_level,
int tdp_huge_page_level)
{
tdp_enabled = enable_tdp;
max_tdp_level = tdp_max_root_level;
/*
* max_huge_page_level reflects KVM's MMU capabilities irrespective
* of kernel support, e.g. KVM may be capable of using 1GB pages when
* the kernel is not. But, KVM never creates a page size greater than
* what is used by the kernel for any given HVA, i.e. the kernel's
* capabilities are ultimately consulted by kvm_mmu_hugepage_adjust().
*/
if (tdp_enabled)
max_huge_page_level = tdp_huge_page_level;
else if (boot_cpu_has(X86_FEATURE_GBPAGES))
max_huge_page_level = PG_LEVEL_1G;
else
max_huge_page_level = PG_LEVEL_2M;
}
EXPORT_SYMBOL_GPL(kvm_configure_mmu);
/* The return value indicates if tlb flush on all vcpus is needed. */
typedef bool (*slot_level_handler) (struct kvm *kvm, struct kvm_rmap_head *rmap_head);
/* The caller should hold mmu-lock before calling this function. */
static __always_inline bool
slot_handle_level_range(struct kvm *kvm, struct kvm_memory_slot *memslot,
slot_level_handler fn, int start_level, int end_level,
gfn_t start_gfn, gfn_t end_gfn, bool lock_flush_tlb)
{
struct slot_rmap_walk_iterator iterator;
bool flush = false;
for_each_slot_rmap_range(memslot, start_level, end_level, start_gfn,
end_gfn, &iterator) {
if (iterator.rmap)
flush |= fn(kvm, iterator.rmap);
if (need_resched() || spin_needbreak(&kvm->mmu_lock)) {
if (flush && lock_flush_tlb) {
kvm_flush_remote_tlbs_with_address(kvm,
start_gfn,
iterator.gfn - start_gfn + 1);
flush = false;
}
cond_resched_lock(&kvm->mmu_lock);
}
}
if (flush && lock_flush_tlb) {
kvm_flush_remote_tlbs_with_address(kvm, start_gfn,
end_gfn - start_gfn + 1);
flush = false;
}
return flush;
}
static __always_inline bool
slot_handle_level(struct kvm *kvm, struct kvm_memory_slot *memslot,
slot_level_handler fn, int start_level, int end_level,
bool lock_flush_tlb)
{
return slot_handle_level_range(kvm, memslot, fn, start_level,
end_level, memslot->base_gfn,
memslot->base_gfn + memslot->npages - 1,
lock_flush_tlb);
}
static __always_inline bool
slot_handle_all_level(struct kvm *kvm, struct kvm_memory_slot *memslot,
slot_level_handler fn, bool lock_flush_tlb)
{
return slot_handle_level(kvm, memslot, fn, PG_LEVEL_4K,
KVM_MAX_HUGEPAGE_LEVEL, lock_flush_tlb);
}
static __always_inline bool
slot_handle_large_level(struct kvm *kvm, struct kvm_memory_slot *memslot,
slot_level_handler fn, bool lock_flush_tlb)
{
return slot_handle_level(kvm, memslot, fn, PG_LEVEL_4K + 1,
KVM_MAX_HUGEPAGE_LEVEL, lock_flush_tlb);
}
static __always_inline bool
slot_handle_leaf(struct kvm *kvm, struct kvm_memory_slot *memslot,
slot_level_handler fn, bool lock_flush_tlb)
{
return slot_handle_level(kvm, memslot, fn, PG_LEVEL_4K,
PG_LEVEL_4K, lock_flush_tlb);
}
static void free_mmu_pages(struct kvm_mmu *mmu)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
free_page((unsigned long)mmu->pae_root);
free_page((unsigned long)mmu->lm_root);
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
static int __kvm_mmu_create(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
struct page *page;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
int i;
mmu->root_hpa = INVALID_PAGE;
mmu->root_pgd = 0;
mmu->translate_gpa = translate_gpa;
for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
mmu->prev_roots[i] = KVM_MMU_ROOT_INFO_INVALID;
/*
* When using PAE paging, the four PDPTEs are treated as 'root' pages,
* while the PDP table is a per-vCPU construct that's allocated at MMU
* creation. When emulating 32-bit mode, cr3 is only 32 bits even on
* x86_64. Therefore we need to allocate the PDP table in the first
* 4GB of memory, which happens to fit the DMA32 zone. Except for
* SVM's 32-bit NPT support, TDP paging doesn't use PAE paging and can
* skip allocating the PDP table.
*/
if (tdp_enabled && kvm_mmu_get_tdp_level(vcpu) > PT32E_ROOT_LEVEL)
return 0;
page = alloc_page(GFP_KERNEL_ACCOUNT | __GFP_DMA32);
if (!page)
return -ENOMEM;
mmu->pae_root = page_address(page);
for (i = 0; i < 4; ++i)
mmu->pae_root[i] = INVALID_PAGE;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
return 0;
}
int kvm_mmu_create(struct kvm_vcpu *vcpu)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
int ret;
vcpu->arch.mmu_pte_list_desc_cache.kmem_cache = pte_list_desc_cache;
vcpu->arch.mmu_pte_list_desc_cache.gfp_zero = __GFP_ZERO;
vcpu->arch.mmu_page_header_cache.kmem_cache = mmu_page_header_cache;
vcpu->arch.mmu_page_header_cache.gfp_zero = __GFP_ZERO;
vcpu->arch.mmu_shadow_page_cache.gfp_zero = __GFP_ZERO;
vcpu->arch.mmu = &vcpu->arch.root_mmu;
vcpu->arch.walk_mmu = &vcpu->arch.root_mmu;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
vcpu->arch.nested_mmu.translate_gpa = translate_nested_gpa;
ret = __kvm_mmu_create(vcpu, &vcpu->arch.guest_mmu);
if (ret)
return ret;
ret = __kvm_mmu_create(vcpu, &vcpu->arch.root_mmu);
if (ret)
goto fail_allocate_root;
return ret;
fail_allocate_root:
free_mmu_pages(&vcpu->arch.guest_mmu);
return ret;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
#define BATCH_ZAP_PAGES 10
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
static void kvm_zap_obsolete_pages(struct kvm *kvm)
{
struct kvm_mmu_page *sp, *node;
int nr_zapped, batch = 0;
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
restart:
list_for_each_entry_safe_reverse(sp, node,
&kvm->arch.active_mmu_pages, link) {
/*
* No obsolete valid page exists before a newly created page
* since active_mmu_pages is a FIFO list.
*/
if (!is_obsolete_sp(kvm, sp))
break;
/*
* Invalid pages should never land back on the list of active
* pages. Skip the bogus page, otherwise we'll get stuck in an
* infinite loop if the page gets put back on the list (again).
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
*/
if (WARN_ON(sp->role.invalid))
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
continue;
/*
* No need to flush the TLB since we're only zapping shadow
* pages with an obsolete generation number and all vCPUS have
* loaded a new root, i.e. the shadow pages being zapped cannot
* be in active use by the guest.
*/
if (batch >= BATCH_ZAP_PAGES &&
cond_resched_lock(&kvm->mmu_lock)) {
batch = 0;
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
goto restart;
}
if (__kvm_mmu_prepare_zap_page(kvm, sp,
&kvm->arch.zapped_obsolete_pages, &nr_zapped)) {
batch += nr_zapped;
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
goto restart;
}
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
}
/*
* Trigger a remote TLB flush before freeing the page tables to ensure
* KVM is not in the middle of a lockless shadow page table walk, which
* may reference the pages.
*/
kvm_mmu_commit_zap_page(kvm, &kvm->arch.zapped_obsolete_pages);
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
}
/*
* Fast invalidate all shadow pages and use lock-break technique
* to zap obsolete pages.
*
* It's required when memslot is being deleted or VM is being
* destroyed, in these cases, we should ensure that KVM MMU does
* not use any resource of the being-deleted slot or all slots
* after calling the function.
*/
static void kvm_mmu_zap_all_fast(struct kvm *kvm)
{
lockdep_assert_held(&kvm->slots_lock);
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
spin_lock(&kvm->mmu_lock);
trace_kvm_mmu_zap_all_fast(kvm);
/*
* Toggle mmu_valid_gen between '0' and '1'. Because slots_lock is
* held for the entire duration of zapping obsolete pages, it's
* impossible for there to be multiple invalid generations associated
* with *valid* shadow pages at any given time, i.e. there is exactly
* one valid generation and (at most) one invalid generation.
*/
kvm->arch.mmu_valid_gen = kvm->arch.mmu_valid_gen ? 0 : 1;
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
/*
* Notify all vcpus to reload its shadow page table and flush TLB.
* Then all vcpus will switch to new shadow page table with the new
* mmu_valid_gen.
*
* Note: we need to do this under the protection of mmu_lock,
* otherwise, vcpu would purge shadow page but miss tlb flush.
*/
kvm_reload_remote_mmus(kvm);
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
kvm_zap_obsolete_pages(kvm);
if (kvm->arch.tdp_mmu_enabled)
kvm_tdp_mmu_zap_all(kvm);
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
spin_unlock(&kvm->mmu_lock);
}
static bool kvm_has_zapped_obsolete_pages(struct kvm *kvm)
{
return unlikely(!list_empty_careful(&kvm->arch.zapped_obsolete_pages));
}
static void kvm_mmu_invalidate_zap_pages_in_memslot(struct kvm *kvm,
struct kvm_memory_slot *slot,
struct kvm_page_track_notifier_node *node)
{
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-13 10:46:02 +08:00
kvm_mmu_zap_all_fast(kvm);
}
void kvm_mmu_init_vm(struct kvm *kvm)
{
struct kvm_page_track_notifier_node *node = &kvm->arch.mmu_sp_tracker;
kvm_mmu_init_tdp_mmu(kvm);
node->track_write = kvm_mmu_pte_write;
node->track_flush_slot = kvm_mmu_invalidate_zap_pages_in_memslot;
kvm_page_track_register_notifier(kvm, node);
}
void kvm_mmu_uninit_vm(struct kvm *kvm)
{
struct kvm_page_track_notifier_node *node = &kvm->arch.mmu_sp_tracker;
kvm_page_track_unregister_notifier(kvm, node);
kvm_mmu_uninit_tdp_mmu(kvm);
}
void kvm_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_end)
{
struct kvm_memslots *slots;
struct kvm_memory_slot *memslot;
int i;
bool flush;
spin_lock(&kvm->mmu_lock);
for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
slots = __kvm_memslots(kvm, i);
kvm_for_each_memslot(memslot, slots) {
gfn_t start, end;
start = max(gfn_start, memslot->base_gfn);
end = min(gfn_end, memslot->base_gfn + memslot->npages);
if (start >= end)
continue;
slot_handle_level_range(kvm, memslot, kvm_zap_rmapp,
PG_LEVEL_4K,
KVM_MAX_HUGEPAGE_LEVEL,
start, end - 1, true);
}
}
if (kvm->arch.tdp_mmu_enabled) {
flush = kvm_tdp_mmu_zap_gfn_range(kvm, gfn_start, gfn_end);
if (flush)
kvm_flush_remote_tlbs(kvm);
}
spin_unlock(&kvm->mmu_lock);
}
static bool slot_rmap_write_protect(struct kvm *kvm,
struct kvm_rmap_head *rmap_head)
{
return __rmap_write_protect(kvm, rmap_head, false);
}
void kvm_mmu_slot_remove_write_access(struct kvm *kvm,
struct kvm_memory_slot *memslot,
int start_level)
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
{
bool flush;
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
spin_lock(&kvm->mmu_lock);
flush = slot_handle_level(kvm, memslot, slot_rmap_write_protect,
start_level, KVM_MAX_HUGEPAGE_LEVEL, false);
spin_unlock(&kvm->mmu_lock);
/*
* We can flush all the TLBs out of the mmu lock without TLB
* corruption since we just change the spte from writable to
* readonly so that we only need to care the case of changing
* spte from present to present (changing the spte from present
* to nonpresent will flush all the TLBs immediately), in other
* words, the only case we care is mmu_spte_update() where we
* have checked SPTE_HOST_WRITEABLE | SPTE_MMU_WRITEABLE
* instead of PT_WRITABLE_MASK, that means it does not depend
* on PT_WRITABLE_MASK anymore.
*/
if (flush)
kvm_arch_flush_remote_tlbs_memslot(kvm, memslot);
[PATCH] kvm: userspace interface web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
}
static bool kvm_mmu_zap_collapsible_spte(struct kvm *kvm,
struct kvm_rmap_head *rmap_head)
{
u64 *sptep;
struct rmap_iterator iter;
int need_tlb_flush = 0;
kvm: rename pfn_t to kvm_pfn_t To date, we have implemented two I/O usage models for persistent memory, PMEM (a persistent "ram disk") and DAX (mmap persistent memory into userspace). This series adds a third, DAX-GUP, that allows DAX mappings to be the target of direct-i/o. It allows userspace to coordinate DMA/RDMA from/to persistent memory. The implementation leverages the ZONE_DEVICE mm-zone that went into 4.3-rc1 (also discussed at kernel summit) to flag pages that are owned and dynamically mapped by a device driver. The pmem driver, after mapping a persistent memory range into the system memmap via devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus page-backed pmem-pfns via flags in the new pfn_t type. The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the resulting pte(s) inserted into the process page tables with a new _PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys off _PAGE_DEVMAP to pin the device hosting the page range active. Finally, get_page() and put_page() are modified to take references against the device driver established page mapping. Finally, this need for "struct page" for persistent memory requires memory capacity to store the memmap array. Given the memmap array for a large pool of persistent may exhaust available DRAM introduce a mechanism to allocate the memmap from persistent memory. The new "struct vmem_altmap *" parameter to devm_memremap_pages() enables arch_add_memory() to use reserved pmem capacity rather than the page allocator. This patch (of 18): The core has developed a need for a "pfn_t" type [1]. Move the existing pfn_t in KVM to kvm_pfn_t [2]. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:56:11 +08:00
kvm_pfn_t pfn;
struct kvm_mmu_page *sp;
restart:
for_each_rmap_spte(rmap_head, &iter, sptep) {
sp = sptep_to_sp(sptep);
pfn = spte_to_pfn(*sptep);
/*
* We cannot do huge page mapping for indirect shadow pages,
* which are found on the last rmap (level = 1) when not using
* tdp; such shadow pages are synced with the page table in
* the guest, and the guest page table is using 4K page size
* mapping if the indirect sp has level = 1.
*/
KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and instead manually handle ZONE_DEVICE on a case-by-case basis. For things like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal pages, e.g. put pages grabbed via gup(). But for flows such as setting A/D bits or shifting refcounts for transparent huge pages, KVM needs to to avoid processing ZONE_DEVICE pages as the flows in question lack the underlying machinery for proper handling of ZONE_DEVICE pages. This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup() when running a KVM guest backed with /dev/dax memory, as KVM straight up doesn't put any references to ZONE_DEVICE pages acquired by gup(). Note, Dan Williams proposed an alternative solution of doing put_page() on ZONE_DEVICE pages immediately after gup() in order to simplify the auditing needed to ensure is_zone_device_page() is called if and only if the backing device is pinned (via gup()). But that approach would break kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til unmap() when accessing guest memory, unlike KVM's secondary MMU, which coordinates with mmu_notifier invalidations to avoid creating stale page references, i.e. doesn't rely on pages being pinned. [*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl Reported-by: Adam Borowski <kilobyte@angband.pl> Analyzed-by: David Hildenbrand <david@redhat.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-12 06:12:27 +08:00
if (sp->role.direct && !kvm_is_reserved_pfn(pfn) &&
(kvm_is_zone_device_pfn(pfn) ||
PageCompound(pfn_to_page(pfn)))) {
pte_list_remove(rmap_head, sptep);
if (kvm_available_flush_tlb_with_range())
kvm_flush_remote_tlbs_with_address(kvm, sp->gfn,
KVM_PAGES_PER_HPAGE(sp->role.level));
else
need_tlb_flush = 1;
goto restart;
}
}
return need_tlb_flush;
}
void kvm_mmu_zap_collapsible_sptes(struct kvm *kvm,
const struct kvm_memory_slot *memslot)
{
/* FIXME: const-ify all uses of struct kvm_memory_slot. */
spin_lock(&kvm->mmu_lock);
slot_handle_leaf(kvm, (struct kvm_memory_slot *)memslot,
kvm_mmu_zap_collapsible_spte, true);
spin_unlock(&kvm->mmu_lock);
}
void kvm_arch_flush_remote_tlbs_memslot(struct kvm *kvm,
struct kvm_memory_slot *memslot)
{
/*
* All current use cases for flushing the TLBs for a specific memslot
* are related to dirty logging, and do the TLB flush out of mmu_lock.
* The interaction between the various operations on memslot must be
* serialized by slots_locks to ensure the TLB flush from one operation
* is observed by any other operation on the same memslot.
*/
lockdep_assert_held(&kvm->slots_lock);
kvm_flush_remote_tlbs_with_address(kvm, memslot->base_gfn,
memslot->npages);
}
void kvm_mmu_slot_leaf_clear_dirty(struct kvm *kvm,
struct kvm_memory_slot *memslot)
{
bool flush;
spin_lock(&kvm->mmu_lock);
flush = slot_handle_leaf(kvm, memslot, __rmap_clear_dirty, false);
spin_unlock(&kvm->mmu_lock);
/*
* It's also safe to flush TLBs out of mmu lock here as currently this
* function is only used for dirty logging, in which case flushing TLB
* out of mmu lock also guarantees no dirty pages will be lost in
* dirty_bitmap.
*/
if (flush)
kvm_arch_flush_remote_tlbs_memslot(kvm, memslot);
}
EXPORT_SYMBOL_GPL(kvm_mmu_slot_leaf_clear_dirty);
void kvm_mmu_slot_largepage_remove_write_access(struct kvm *kvm,
struct kvm_memory_slot *memslot)
{
bool flush;
spin_lock(&kvm->mmu_lock);
flush = slot_handle_large_level(kvm, memslot, slot_rmap_write_protect,
false);
spin_unlock(&kvm->mmu_lock);
if (flush)
kvm_arch_flush_remote_tlbs_memslot(kvm, memslot);
}
EXPORT_SYMBOL_GPL(kvm_mmu_slot_largepage_remove_write_access);
void kvm_mmu_slot_set_dirty(struct kvm *kvm,
struct kvm_memory_slot *memslot)
{
bool flush;
spin_lock(&kvm->mmu_lock);
flush = slot_handle_all_level(kvm, memslot, __rmap_set_dirty, false);
spin_unlock(&kvm->mmu_lock);
if (flush)
kvm_arch_flush_remote_tlbs_memslot(kvm, memslot);
}
EXPORT_SYMBOL_GPL(kvm_mmu_slot_set_dirty);
void kvm_mmu_zap_all(struct kvm *kvm)
{
struct kvm_mmu_page *sp, *node;
LIST_HEAD(invalid_list);
KVM: x86/mmu: Differentiate between nr zapped and list unstable The return value of kvm_mmu_prepare_zap_page() has evolved to become overloaded to convey two separate pieces of information. 1) was at least one page zapped and 2) has the list of MMU pages become unstable. In it's original incarnation (as kvm_mmu_zap_page()), there was no return value at all. Commit 0738541396be ("KVM: MMU: awareness of new kvm_mmu_zap_page behaviour") added a return value in preparation for commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"). Although the return value was of type 'int', it was actually used as a boolean to indicate whether or not active_mmu_pages may have become unstable due to zapping children. Walking a list with list_for_each_entry_safe() only protects against deleting/moving the current entry, i.e. zapping a child page would break iteration due to modifying any number of entries. Later, commit 60c8aec6e2c9 ("KVM: MMU: use page array in unsync walk") modified mmu_zap_unsync_children() to return an approximation of the number of children zapped. This was not intentional, it was simply a side effect of how the code was written. The unintented side affect was then morphed into an actual feature by commit 77662e0028c7 ("KVM: MMU: fix kvm_mmu_zap_page() and its calling path"), which modified kvm_mmu_change_mmu_pages() to use the number of zapped pages when determining the number of MMU pages in use by the VM. Finally, commit 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") added the initial page to the return value to make its behavior more consistent with what most users would expect. Incorporating the initial parent page in the return value of kvm_mmu_zap_page() breaks the original usage of restarting a list walk on a non-zero return value to handle a potentially unstable list, i.e. walks will unnecessarily restart when any page is zapped. Fix this by restoring the original behavior of kvm_mmu_zap_page(), i.e. return a boolean to indicate that the list may be unstable and move the number of zapped children to a dedicated parameter. Since the majority of callers to kvm_mmu_prepare_zap_page() don't care about either return value, preserve the current definition of kvm_mmu_prepare_zap_page() by making it a wrapper of a new helper, __kvm_mmu_prepare_zap_page(). This avoids having to update every call site and also provides cleaner code for functions that only care about the number of pages zapped. Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-06 05:01:35 +08:00
int ign;
spin_lock(&kvm->mmu_lock);
restart:
list_for_each_entry_safe(sp, node, &kvm->arch.active_mmu_pages, link) {
if (WARN_ON(sp->role.invalid))
continue;
if (__kvm_mmu_prepare_zap_page(kvm, sp, &invalid_list, &ign))
goto restart;
if (cond_resched_lock(&kvm->mmu_lock))
goto restart;
}
kvm_mmu_commit_zap_page(kvm, &invalid_list);
if (kvm->arch.tdp_mmu_enabled)
kvm_tdp_mmu_zap_all(kvm);
spin_unlock(&kvm->mmu_lock);
}
void kvm_mmu_invalidate_mmio_sptes(struct kvm *kvm, u64 gen)
{
WARN_ON(gen & KVM_MEMSLOT_GEN_UPDATE_IN_PROGRESS);
gen &= MMIO_SPTE_GEN_MASK;
/*
* Generation numbers are incremented in multiples of the number of
* address spaces in order to provide unique generations across all
* address spaces. Strip what is effectively the address space
* modifier prior to checking for a wrap of the MMIO generation so
* that a wrap in any address space is detected.
*/
gen &= ~((u64)KVM_ADDRESS_SPACE_NUM - 1);
/*
* The very rare case: if the MMIO generation number has wrapped,
* zap all shadow pages.
*/
if (unlikely(gen == 0)) {
kvm_debug_ratelimited("kvm: zapping shadow pages for mmio generation wraparound\n");
kvm_mmu_zap_all_fast(kvm);
}
}
shrinker: convert remaining shrinkers to count/scan API Convert the remaining couple of random shrinkers in the tree to the new API. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:14 +08:00
static unsigned long
mmu_shrink_scan(struct shrinker *shrink, struct shrink_control *sc)
{
struct kvm *kvm;
int nr_to_scan = sc->nr_to_scan;
shrinker: convert remaining shrinkers to count/scan API Convert the remaining couple of random shrinkers in the tree to the new API. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:14 +08:00
unsigned long freed = 0;
mutex_lock(&kvm_lock);
list_for_each_entry(kvm, &vm_list, vm_list) {
int idx;
LIST_HEAD(invalid_list);
/*
* Never scan more than sc->nr_to_scan VM instances.
* Will not hit this condition practically since we do not try
* to shrink more than one VM and it is very unlikely to see
* !n_used_mmu_pages so many times.
*/
if (!nr_to_scan--)
break;
/*
* n_used_mmu_pages is accessed without holding kvm->mmu_lock
* here. We may skip a VM instance errorneosly, but we do not
* want to shrink a VM that only started to populate its MMU
* anyway.
*/
if (!kvm->arch.n_used_mmu_pages &&
!kvm_has_zapped_obsolete_pages(kvm))
continue;
idx = srcu_read_lock(&kvm->srcu);
spin_lock(&kvm->mmu_lock);
if (kvm_has_zapped_obsolete_pages(kvm)) {
kvm_mmu_commit_zap_page(kvm,
&kvm->arch.zapped_obsolete_pages);
goto unlock;
}
freed = kvm_mmu_zap_oldest_mmu_pages(kvm, sc->nr_to_scan);
unlock:
spin_unlock(&kvm->mmu_lock);
srcu_read_unlock(&kvm->srcu, idx);
shrinker: convert remaining shrinkers to count/scan API Convert the remaining couple of random shrinkers in the tree to the new API. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:14 +08:00
/*
* unfair on small ones
* per-vm shrinkers cry out
* sadness comes quickly
*/
list_move_tail(&kvm->vm_list, &vm_list);
break;
}
mutex_unlock(&kvm_lock);
shrinker: convert remaining shrinkers to count/scan API Convert the remaining couple of random shrinkers in the tree to the new API. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:14 +08:00
return freed;
}
static unsigned long
mmu_shrink_count(struct shrinker *shrink, struct shrink_control *sc)
{
return percpu_counter_read_positive(&kvm_total_used_mmu_pages);
}
static struct shrinker mmu_shrinker = {
shrinker: convert remaining shrinkers to count/scan API Convert the remaining couple of random shrinkers in the tree to the new API. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:18:14 +08:00
.count_objects = mmu_shrink_count,
.scan_objects = mmu_shrink_scan,
.seeks = DEFAULT_SEEKS * 10,
};
static void mmu_destroy_caches(void)
{
kmem_cache_destroy(pte_list_desc_cache);
kmem_cache_destroy(mmu_page_header_cache);
}
static void kvm_set_mmio_spte_mask(void)
{
u64 mask;
/*
* Set a reserved PA bit in MMIO SPTEs to generate page faults with
* PFEC.RSVD=1 on MMIO accesses. 64-bit PTEs (PAE, x86-64, and EPT
* paging) support a maximum of 52 bits of PA, i.e. if the CPU supports
* 52-bit physical addresses then there are no reserved PA bits in the
* PTEs and so the reserved PA approach must be disabled.
*/
if (shadow_phys_bits < 52)
mask = BIT_ULL(51) | PT_PRESENT_MASK;
else
mask = 0;
kvm_mmu_set_mmio_spte_mask(mask, ACC_WRITE_MASK | ACC_USER_MASK);
}
static bool get_nx_auto_mode(void)
{
/* Return true when CPU has the bug, and mitigations are ON */
return boot_cpu_has_bug(X86_BUG_ITLB_MULTIHIT) && !cpu_mitigations_off();
}
static void __set_nx_huge_pages(bool val)
{
nx_huge_pages = itlb_multihit_kvm_mitigation = val;
}
static int set_nx_huge_pages(const char *val, const struct kernel_param *kp)
{
bool old_val = nx_huge_pages;
bool new_val;
/* In "auto" mode deploy workaround only if CPU has the bug. */
if (sysfs_streq(val, "off"))
new_val = 0;
else if (sysfs_streq(val, "force"))
new_val = 1;
else if (sysfs_streq(val, "auto"))
new_val = get_nx_auto_mode();
else if (strtobool(val, &new_val) < 0)
return -EINVAL;
__set_nx_huge_pages(new_val);
if (new_val != old_val) {
struct kvm *kvm;
mutex_lock(&kvm_lock);
list_for_each_entry(kvm, &vm_list, vm_list) {
KVM: x86/mmu: Take slots_lock when using kvm_mmu_zap_all_fast() Acquire the per-VM slots_lock when zapping all shadow pages as part of toggling nx_huge_pages. The fast zap algorithm relies on exclusivity (via slots_lock) to identify obsolete vs. valid shadow pages, because it uses a single bit for its generation number. Holding slots_lock also obviates the need to acquire a read lock on the VM's srcu. Failing to take slots_lock when toggling nx_huge_pages allows multiple instances of kvm_mmu_zap_all_fast() to run concurrently, as the other user, KVM_SET_USER_MEMORY_REGION, does not take the global kvm_lock. (kvm_mmu_zap_all_fast() does take kvm->mmu_lock, but it can be temporarily dropped by kvm_zap_obsolete_pages(), so it is not enough to enforce exclusivity). Concurrent fast zap instances causes obsolete shadow pages to be incorrectly identified as valid due to the single bit generation number wrapping, which results in stale shadow pages being left in KVM's MMU and leads to all sorts of undesirable behavior. The bug is easily confirmed by running with CONFIG_PROVE_LOCKING and toggling nx_huge_pages via its module param. Note, until commit 4ae5acbc4936 ("KVM: x86/mmu: Take slots_lock when using kvm_mmu_zap_all_fast()", 2019-11-13) the fast zap algorithm used an ulong-sized generation instead of relying on exclusivity for correctness, but all callers except the recently added set_nx_huge_pages() needed to hold slots_lock anyways. Therefore, this patch does not have to be backported to stable kernels. Given that toggling nx_huge_pages is by no means a fast path, force it to conform to the current approach instead of reintroducing the previous generation count. Fixes: b8e8c8303ff28 ("kvm: mmu: ITLB_MULTIHIT mitigation", but NOT FOR STABLE) Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-14 03:30:32 +08:00
mutex_lock(&kvm->slots_lock);
kvm_mmu_zap_all_fast(kvm);
KVM: x86/mmu: Take slots_lock when using kvm_mmu_zap_all_fast() Acquire the per-VM slots_lock when zapping all shadow pages as part of toggling nx_huge_pages. The fast zap algorithm relies on exclusivity (via slots_lock) to identify obsolete vs. valid shadow pages, because it uses a single bit for its generation number. Holding slots_lock also obviates the need to acquire a read lock on the VM's srcu. Failing to take slots_lock when toggling nx_huge_pages allows multiple instances of kvm_mmu_zap_all_fast() to run concurrently, as the other user, KVM_SET_USER_MEMORY_REGION, does not take the global kvm_lock. (kvm_mmu_zap_all_fast() does take kvm->mmu_lock, but it can be temporarily dropped by kvm_zap_obsolete_pages(), so it is not enough to enforce exclusivity). Concurrent fast zap instances causes obsolete shadow pages to be incorrectly identified as valid due to the single bit generation number wrapping, which results in stale shadow pages being left in KVM's MMU and leads to all sorts of undesirable behavior. The bug is easily confirmed by running with CONFIG_PROVE_LOCKING and toggling nx_huge_pages via its module param. Note, until commit 4ae5acbc4936 ("KVM: x86/mmu: Take slots_lock when using kvm_mmu_zap_all_fast()", 2019-11-13) the fast zap algorithm used an ulong-sized generation instead of relying on exclusivity for correctness, but all callers except the recently added set_nx_huge_pages() needed to hold slots_lock anyways. Therefore, this patch does not have to be backported to stable kernels. Given that toggling nx_huge_pages is by no means a fast path, force it to conform to the current approach instead of reintroducing the previous generation count. Fixes: b8e8c8303ff28 ("kvm: mmu: ITLB_MULTIHIT mitigation", but NOT FOR STABLE) Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-14 03:30:32 +08:00
mutex_unlock(&kvm->slots_lock);
wake_up_process(kvm->arch.nx_lpage_recovery_thread);
}
mutex_unlock(&kvm_lock);
}
return 0;
}
int kvm_mmu_module_init(void)
{
int ret = -ENOMEM;
if (nx_huge_pages == -1)
__set_nx_huge_pages(get_nx_auto_mode());
/*
* MMU roles use union aliasing which is, generally speaking, an
* undefined behavior. However, we supposedly know how compilers behave
* and the current status quo is unlikely to change. Guardians below are
* supposed to let us know if the assumption becomes false.
*/
BUILD_BUG_ON(sizeof(union kvm_mmu_page_role) != sizeof(u32));
BUILD_BUG_ON(sizeof(union kvm_mmu_extended_role) != sizeof(u32));
BUILD_BUG_ON(sizeof(union kvm_mmu_role) != sizeof(u64));
kvm_mmu_reset_all_pte_masks();
kvm_set_mmio_spte_mask();
pte_list_desc_cache = kmem_cache_create("pte_list_desc",
sizeof(struct pte_list_desc),
0, SLAB_ACCOUNT, NULL);
if (!pte_list_desc_cache)
goto out;
mmu_page_header_cache = kmem_cache_create("kvm_mmu_page_header",
sizeof(struct kvm_mmu_page),
0, SLAB_ACCOUNT, NULL);
if (!mmu_page_header_cache)
goto out;
if (percpu_counter_init(&kvm_total_used_mmu_pages, 0, GFP_KERNEL))
goto out;
ret = register_shrinker(&mmu_shrinker);
if (ret)
goto out;
return 0;
out:
mmu_destroy_caches();
return ret;
}
/*
* Calculate mmu pages needed for kvm.
*/
unsigned long kvm_mmu_calculate_default_mmu_pages(struct kvm *kvm)
{
unsigned long nr_mmu_pages;
unsigned long nr_pages = 0;
struct kvm_memslots *slots;
struct kvm_memory_slot *memslot;
int i;
for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
slots = __kvm_memslots(kvm, i);
KVM: use the correct RCU API for PROVE_RCU=y The RCU/SRCU API have already changed for proving RCU usage. I got the following dmesg when PROVE_RCU=y because we used incorrect API. This patch coverts rcu_deference() to srcu_dereference() or family API. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by qemu-system-x86/8550: #0: (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm] #1: (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm] stack backtrace: Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27 Call Trace: [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm] [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm] [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm] [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm] [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel] [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm] [<ffffffff810a8692>] ? unlock_page+0x27/0x2c [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm] [<ffffffff81060cfa>] ? up_read+0x23/0x3d [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a [<ffffffff810021db>] system_call_fastpath+0x16/0x1b Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-19 17:41:23 +08:00
kvm_for_each_memslot(memslot, slots)
nr_pages += memslot->npages;
}
nr_mmu_pages = nr_pages * KVM_PERMILLE_MMU_PAGES / 1000;
nr_mmu_pages = max(nr_mmu_pages, KVM_MIN_ALLOC_MMU_PAGES);
return nr_mmu_pages;
}
void kvm_mmu_destroy(struct kvm_vcpu *vcpu)
{
kvm_mmu_unload(vcpu);
free_mmu_pages(&vcpu->arch.root_mmu);
free_mmu_pages(&vcpu->arch.guest_mmu);
mmu_free_memory_caches(vcpu);
}
void kvm_mmu_module_exit(void)
{
mmu_destroy_caches();
percpu_counter_destroy(&kvm_total_used_mmu_pages);
unregister_shrinker(&mmu_shrinker);
mmu_audit_disable();
}
static int set_nx_huge_pages_recovery_ratio(const char *val, const struct kernel_param *kp)
{
unsigned int old_val;
int err;
old_val = nx_huge_pages_recovery_ratio;
err = param_set_uint(val, kp);
if (err)
return err;
if (READ_ONCE(nx_huge_pages) &&
!old_val && nx_huge_pages_recovery_ratio) {
struct kvm *kvm;
mutex_lock(&kvm_lock);
list_for_each_entry(kvm, &vm_list, vm_list)
wake_up_process(kvm->arch.nx_lpage_recovery_thread);
mutex_unlock(&kvm_lock);
}
return err;
}
static void kvm_recover_nx_lpages(struct kvm *kvm)
{
int rcu_idx;
struct kvm_mmu_page *sp;
unsigned int ratio;
LIST_HEAD(invalid_list);
ulong to_zap;
rcu_idx = srcu_read_lock(&kvm->srcu);
spin_lock(&kvm->mmu_lock);
ratio = READ_ONCE(nx_huge_pages_recovery_ratio);
to_zap = ratio ? DIV_ROUND_UP(kvm->stat.nx_lpage_splits, ratio) : 0;
for ( ; to_zap; --to_zap) {
if (list_empty(&kvm->arch.lpage_disallowed_mmu_pages))
break;
/*
* We use a separate list instead of just using active_mmu_pages
* because the number of lpage_disallowed pages is expected to
* be relatively small compared to the total.
*/
sp = list_first_entry(&kvm->arch.lpage_disallowed_mmu_pages,
struct kvm_mmu_page,
lpage_disallowed_link);
WARN_ON_ONCE(!sp->lpage_disallowed);
kvm_mmu_prepare_zap_page(kvm, sp, &invalid_list);
WARN_ON_ONCE(sp->lpage_disallowed);
if (need_resched() || spin_needbreak(&kvm->mmu_lock)) {
kvm_mmu_commit_zap_page(kvm, &invalid_list);
cond_resched_lock(&kvm->mmu_lock);
}
}
kvm_mmu_commit_zap_page(kvm, &invalid_list);
spin_unlock(&kvm->mmu_lock);
srcu_read_unlock(&kvm->srcu, rcu_idx);
}
static long get_nx_lpage_recovery_timeout(u64 start_time)
{
return READ_ONCE(nx_huge_pages) && READ_ONCE(nx_huge_pages_recovery_ratio)
? start_time + 60 * HZ - get_jiffies_64()
: MAX_SCHEDULE_TIMEOUT;
}
static int kvm_nx_lpage_recovery_worker(struct kvm *kvm, uintptr_t data)
{
u64 start_time;
long remaining_time;
while (true) {
start_time = get_jiffies_64();
remaining_time = get_nx_lpage_recovery_timeout(start_time);
set_current_state(TASK_INTERRUPTIBLE);
while (!kthread_should_stop() && remaining_time > 0) {
schedule_timeout(remaining_time);
remaining_time = get_nx_lpage_recovery_timeout(start_time);
set_current_state(TASK_INTERRUPTIBLE);
}
set_current_state(TASK_RUNNING);
if (kthread_should_stop())
return 0;
kvm_recover_nx_lpages(kvm);
}
}
int kvm_mmu_post_init_vm(struct kvm *kvm)
{
int err;
err = kvm_vm_create_worker_thread(kvm, kvm_nx_lpage_recovery_worker, 0,
"kvm-nx-lpage-recovery",
&kvm->arch.nx_lpage_recovery_thread);
if (!err)
kthread_unpark(kvm->arch.nx_lpage_recovery_thread);
return err;
}
void kvm_mmu_pre_destroy_vm(struct kvm *kvm)
{
if (kvm->arch.nx_lpage_recovery_thread)
kthread_stop(kvm->arch.nx_lpage_recovery_thread);
}