linux/block/bfq-cgroup.c

1497 lines
40 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* cgroups support for the BFQ I/O scheduler.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/cgroup.h>
#include <linux/ktime.h>
#include <linux/rbtree.h>
#include <linux/ioprio.h>
#include <linux/sbitmap.h>
#include <linux/delay.h>
#include "elevator.h"
#include "bfq-iosched.h"
#ifdef CONFIG_BFQ_CGROUP_DEBUG
static int bfq_stat_init(struct bfq_stat *stat, gfp_t gfp)
{
int ret;
ret = percpu_counter_init(&stat->cpu_cnt, 0, gfp);
if (ret)
return ret;
atomic64_set(&stat->aux_cnt, 0);
return 0;
}
static void bfq_stat_exit(struct bfq_stat *stat)
{
percpu_counter_destroy(&stat->cpu_cnt);
}
/**
* bfq_stat_add - add a value to a bfq_stat
* @stat: target bfq_stat
* @val: value to add
*
* Add @val to @stat. The caller must ensure that IRQ on the same CPU
* don't re-enter this function for the same counter.
*/
static inline void bfq_stat_add(struct bfq_stat *stat, uint64_t val)
{
percpu_counter_add_batch(&stat->cpu_cnt, val, BLKG_STAT_CPU_BATCH);
}
/**
* bfq_stat_read - read the current value of a bfq_stat
* @stat: bfq_stat to read
*/
static inline uint64_t bfq_stat_read(struct bfq_stat *stat)
{
return percpu_counter_sum_positive(&stat->cpu_cnt);
}
/**
* bfq_stat_reset - reset a bfq_stat
* @stat: bfq_stat to reset
*/
static inline void bfq_stat_reset(struct bfq_stat *stat)
{
percpu_counter_set(&stat->cpu_cnt, 0);
atomic64_set(&stat->aux_cnt, 0);
}
/**
* bfq_stat_add_aux - add a bfq_stat into another's aux count
* @to: the destination bfq_stat
* @from: the source
*
* Add @from's count including the aux one to @to's aux count.
*/
static inline void bfq_stat_add_aux(struct bfq_stat *to,
struct bfq_stat *from)
{
atomic64_add(bfq_stat_read(from) + atomic64_read(&from->aux_cnt),
&to->aux_cnt);
}
/**
* blkg_prfill_stat - prfill callback for bfq_stat
* @sf: seq_file to print to
* @pd: policy private data of interest
* @off: offset to the bfq_stat in @pd
*
* prfill callback for printing a bfq_stat.
*/
static u64 blkg_prfill_stat(struct seq_file *sf, struct blkg_policy_data *pd,
int off)
{
return __blkg_prfill_u64(sf, pd, bfq_stat_read((void *)pd + off));
}
/* bfqg stats flags */
enum bfqg_stats_flags {
BFQG_stats_waiting = 0,
BFQG_stats_idling,
BFQG_stats_empty,
};
#define BFQG_FLAG_FNS(name) \
static void bfqg_stats_mark_##name(struct bfqg_stats *stats) \
{ \
stats->flags |= (1 << BFQG_stats_##name); \
} \
static void bfqg_stats_clear_##name(struct bfqg_stats *stats) \
{ \
stats->flags &= ~(1 << BFQG_stats_##name); \
} \
static int bfqg_stats_##name(struct bfqg_stats *stats) \
{ \
return (stats->flags & (1 << BFQG_stats_##name)) != 0; \
} \
BFQG_FLAG_FNS(waiting)
BFQG_FLAG_FNS(idling)
BFQG_FLAG_FNS(empty)
#undef BFQG_FLAG_FNS
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
/* This should be called with the scheduler lock held. */
static void bfqg_stats_update_group_wait_time(struct bfqg_stats *stats)
{
u64 now;
if (!bfqg_stats_waiting(stats))
return;
now = ktime_get_ns();
if (now > stats->start_group_wait_time)
bfq_stat_add(&stats->group_wait_time,
now - stats->start_group_wait_time);
bfqg_stats_clear_waiting(stats);
}
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
/* This should be called with the scheduler lock held. */
static void bfqg_stats_set_start_group_wait_time(struct bfq_group *bfqg,
struct bfq_group *curr_bfqg)
{
struct bfqg_stats *stats = &bfqg->stats;
if (bfqg_stats_waiting(stats))
return;
if (bfqg == curr_bfqg)
return;
stats->start_group_wait_time = ktime_get_ns();
bfqg_stats_mark_waiting(stats);
}
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
/* This should be called with the scheduler lock held. */
static void bfqg_stats_end_empty_time(struct bfqg_stats *stats)
{
u64 now;
if (!bfqg_stats_empty(stats))
return;
now = ktime_get_ns();
if (now > stats->start_empty_time)
bfq_stat_add(&stats->empty_time,
now - stats->start_empty_time);
bfqg_stats_clear_empty(stats);
}
void bfqg_stats_update_dequeue(struct bfq_group *bfqg)
{
bfq_stat_add(&bfqg->stats.dequeue, 1);
}
void bfqg_stats_set_start_empty_time(struct bfq_group *bfqg)
{
struct bfqg_stats *stats = &bfqg->stats;
if (blkg_rwstat_total(&stats->queued))
return;
/*
* group is already marked empty. This can happen if bfqq got new
* request in parent group and moved to this group while being added
* to service tree. Just ignore the event and move on.
*/
if (bfqg_stats_empty(stats))
return;
stats->start_empty_time = ktime_get_ns();
bfqg_stats_mark_empty(stats);
}
void bfqg_stats_update_idle_time(struct bfq_group *bfqg)
{
struct bfqg_stats *stats = &bfqg->stats;
if (bfqg_stats_idling(stats)) {
u64 now = ktime_get_ns();
if (now > stats->start_idle_time)
bfq_stat_add(&stats->idle_time,
now - stats->start_idle_time);
bfqg_stats_clear_idling(stats);
}
}
void bfqg_stats_set_start_idle_time(struct bfq_group *bfqg)
{
struct bfqg_stats *stats = &bfqg->stats;
stats->start_idle_time = ktime_get_ns();
bfqg_stats_mark_idling(stats);
}
void bfqg_stats_update_avg_queue_size(struct bfq_group *bfqg)
{
struct bfqg_stats *stats = &bfqg->stats;
bfq_stat_add(&stats->avg_queue_size_sum,
blkg_rwstat_total(&stats->queued));
bfq_stat_add(&stats->avg_queue_size_samples, 1);
bfqg_stats_update_group_wait_time(stats);
}
2017-11-13 14:34:10 +08:00
void bfqg_stats_update_io_add(struct bfq_group *bfqg, struct bfq_queue *bfqq,
blk_opf_t opf)
2017-11-13 14:34:10 +08:00
{
blkg_rwstat_add(&bfqg->stats.queued, opf, 1);
2017-11-13 14:34:10 +08:00
bfqg_stats_end_empty_time(&bfqg->stats);
if (!(bfqq == bfqg->bfqd->in_service_queue))
2017-11-13 14:34:10 +08:00
bfqg_stats_set_start_group_wait_time(bfqg, bfqq_group(bfqq));
}
void bfqg_stats_update_io_remove(struct bfq_group *bfqg, blk_opf_t opf)
2017-11-13 14:34:10 +08:00
{
blkg_rwstat_add(&bfqg->stats.queued, opf, -1);
2017-11-13 14:34:10 +08:00
}
void bfqg_stats_update_io_merged(struct bfq_group *bfqg, blk_opf_t opf)
2017-11-13 14:34:10 +08:00
{
blkg_rwstat_add(&bfqg->stats.merged, opf, 1);
2017-11-13 14:34:10 +08:00
}
void bfqg_stats_update_completion(struct bfq_group *bfqg, u64 start_time_ns,
u64 io_start_time_ns, blk_opf_t opf)
2017-11-13 14:34:10 +08:00
{
struct bfqg_stats *stats = &bfqg->stats;
u64 now = ktime_get_ns();
2017-11-13 14:34:10 +08:00
if (now > io_start_time_ns)
blkg_rwstat_add(&stats->service_time, opf,
now - io_start_time_ns);
if (io_start_time_ns > start_time_ns)
blkg_rwstat_add(&stats->wait_time, opf,
io_start_time_ns - start_time_ns);
2017-11-13 14:34:10 +08:00
}
#else /* CONFIG_BFQ_CGROUP_DEBUG */
2017-11-13 14:34:10 +08:00
void bfqg_stats_update_io_remove(struct bfq_group *bfqg, blk_opf_t opf) { }
void bfqg_stats_update_io_merged(struct bfq_group *bfqg, blk_opf_t opf) { }
void bfqg_stats_update_completion(struct bfq_group *bfqg, u64 start_time_ns,
u64 io_start_time_ns, blk_opf_t opf) { }
2017-11-13 14:34:10 +08:00
void bfqg_stats_update_dequeue(struct bfq_group *bfqg) { }
void bfqg_stats_set_start_idle_time(struct bfq_group *bfqg) { }
#endif /* CONFIG_BFQ_CGROUP_DEBUG */
2017-11-13 14:34:10 +08:00
#ifdef CONFIG_BFQ_GROUP_IOSCHED
/*
* blk-cgroup policy-related handlers
* The following functions help in converting between blk-cgroup
* internal structures and BFQ-specific structures.
*/
static struct bfq_group *pd_to_bfqg(struct blkg_policy_data *pd)
{
return pd ? container_of(pd, struct bfq_group, pd) : NULL;
}
struct blkcg_gq *bfqg_to_blkg(struct bfq_group *bfqg)
{
return pd_to_blkg(&bfqg->pd);
}
static struct bfq_group *blkg_to_bfqg(struct blkcg_gq *blkg)
{
return pd_to_bfqg(blkg_to_pd(blkg, &blkcg_policy_bfq));
}
/*
* bfq_group handlers
* The following functions help in navigating the bfq_group hierarchy
* by allowing to find the parent of a bfq_group or the bfq_group
* associated to a bfq_queue.
*/
static struct bfq_group *bfqg_parent(struct bfq_group *bfqg)
{
struct blkcg_gq *pblkg = bfqg_to_blkg(bfqg)->parent;
return pblkg ? blkg_to_bfqg(pblkg) : NULL;
}
struct bfq_group *bfqq_group(struct bfq_queue *bfqq)
{
struct bfq_entity *group_entity = bfqq->entity.parent;
return group_entity ? container_of(group_entity, struct bfq_group,
entity) :
bfqq->bfqd->root_group;
}
/*
* The following two functions handle get and put of a bfq_group by
* wrapping the related blk-cgroup hooks.
*/
static void bfqg_get(struct bfq_group *bfqg)
{
refcount_inc(&bfqg->ref);
}
static void bfqg_put(struct bfq_group *bfqg)
{
if (refcount_dec_and_test(&bfqg->ref))
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
kfree(bfqg);
}
bfq: fix blkio cgroup leakage v4 Changes from v1: - update commit description with proper ref-accounting justification commit db37a34c563b ("block, bfq: get a ref to a group when adding it to a service tree") introduce leak forbfq_group and blkcg_gq objects because of get/put imbalance. In fact whole idea of original commit is wrong because bfq_group entity can not dissapear under us because it is referenced by child bfq_queue's entities from here: -> bfq_init_entity() ->bfqg_and_blkg_get(bfqg); ->entity->parent = bfqg->my_entity -> bfq_put_queue(bfqq) FINAL_PUT ->bfqg_and_blkg_put(bfqq_group(bfqq)) ->kmem_cache_free(bfq_pool, bfqq); So parent entity can not disappear while child entity is in tree, and child entities already has proper protection. This patch revert commit db37a34c563b ("block, bfq: get a ref to a group when adding it to a service tree") bfq_group leak trace caused by bad commit: -> blkg_alloc -> bfq_pq_alloc -> bfqg_get (+1) ->bfq_activate_bfqq ->bfq_activate_requeue_entity -> __bfq_activate_entity ->bfq_get_entity ->bfqg_and_blkg_get (+1) <==== : Note1 ->bfq_del_bfqq_busy ->bfq_deactivate_entity+0x53/0xc0 [bfq] ->__bfq_deactivate_entity+0x1b8/0x210 [bfq] -> bfq_forget_entity(is_in_service = true) entity->on_st_or_in_serv = false <=== :Note2 if (is_in_service) return; ==> do not touch reference -> blkcg_css_offline -> blkcg_destroy_blkgs -> blkg_destroy -> bfq_pd_offline -> __bfq_deactivate_entity if (!entity->on_st_or_in_serv) /* true, because (Note2) return false; -> bfq_pd_free -> bfqg_put() (-1, byt bfqg->ref == 2) because of (Note2) So bfq_group and blkcg_gq will leak forever, see test-case below. ##TESTCASE_BEGIN: #!/bin/bash max_iters=${1:-100} #prep cgroup mounts mount -t tmpfs cgroup_root /sys/fs/cgroup mkdir /sys/fs/cgroup/blkio mount -t cgroup -o blkio none /sys/fs/cgroup/blkio # Prepare blkdev grep blkio /proc/cgroups truncate -s 1M img losetup /dev/loop0 img echo bfq > /sys/block/loop0/queue/scheduler grep blkio /proc/cgroups for ((i=0;i<max_iters;i++)) do mkdir -p /sys/fs/cgroup/blkio/a echo 0 > /sys/fs/cgroup/blkio/a/cgroup.procs dd if=/dev/loop0 bs=4k count=1 of=/dev/null iflag=direct 2> /dev/null echo 0 > /sys/fs/cgroup/blkio/cgroup.procs rmdir /sys/fs/cgroup/blkio/a grep blkio /proc/cgroups done ##TESTCASE_END: Fixes: db37a34c563b ("block, bfq: get a ref to a group when adding it to a service tree") Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-11 14:43:40 +08:00
static void bfqg_and_blkg_get(struct bfq_group *bfqg)
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
{
/* see comments in bfq_bic_update_cgroup for why refcounting bfqg */
bfqg_get(bfqg);
blkg_get(bfqg_to_blkg(bfqg));
}
void bfqg_and_blkg_put(struct bfq_group *bfqg)
{
blkg_put(bfqg_to_blkg(bfqg));
bfqg_put(bfqg);
}
void bfqg_stats_update_legacy_io(struct request_queue *q, struct request *rq)
{
struct bfq_group *bfqg = blkg_to_bfqg(rq->bio->bi_blkg);
if (!bfqg)
return;
blkg_rwstat_add(&bfqg->stats.bytes, rq->cmd_flags, blk_rq_bytes(rq));
blkg_rwstat_add(&bfqg->stats.ios, rq->cmd_flags, 1);
}
/* @stats = 0 */
static void bfqg_stats_reset(struct bfqg_stats *stats)
{
#ifdef CONFIG_BFQ_CGROUP_DEBUG
/* queued stats shouldn't be cleared */
blkg_rwstat_reset(&stats->merged);
blkg_rwstat_reset(&stats->service_time);
blkg_rwstat_reset(&stats->wait_time);
bfq_stat_reset(&stats->time);
bfq_stat_reset(&stats->avg_queue_size_sum);
bfq_stat_reset(&stats->avg_queue_size_samples);
bfq_stat_reset(&stats->dequeue);
bfq_stat_reset(&stats->group_wait_time);
bfq_stat_reset(&stats->idle_time);
bfq_stat_reset(&stats->empty_time);
2017-11-13 14:34:10 +08:00
#endif
}
/* @to += @from */
static void bfqg_stats_add_aux(struct bfqg_stats *to, struct bfqg_stats *from)
{
if (!to || !from)
return;
#ifdef CONFIG_BFQ_CGROUP_DEBUG
/* queued stats shouldn't be cleared */
blkg_rwstat_add_aux(&to->merged, &from->merged);
blkg_rwstat_add_aux(&to->service_time, &from->service_time);
blkg_rwstat_add_aux(&to->wait_time, &from->wait_time);
bfq_stat_add_aux(&from->time, &from->time);
bfq_stat_add_aux(&to->avg_queue_size_sum, &from->avg_queue_size_sum);
bfq_stat_add_aux(&to->avg_queue_size_samples,
&from->avg_queue_size_samples);
bfq_stat_add_aux(&to->dequeue, &from->dequeue);
bfq_stat_add_aux(&to->group_wait_time, &from->group_wait_time);
bfq_stat_add_aux(&to->idle_time, &from->idle_time);
bfq_stat_add_aux(&to->empty_time, &from->empty_time);
2017-11-13 14:34:10 +08:00
#endif
}
/*
* Transfer @bfqg's stats to its parent's aux counts so that the ancestors'
* recursive stats can still account for the amount used by this bfqg after
* it's gone.
*/
static void bfqg_stats_xfer_dead(struct bfq_group *bfqg)
{
struct bfq_group *parent;
if (!bfqg) /* root_group */
return;
parent = bfqg_parent(bfqg);
lockdep_assert_held(&bfqg_to_blkg(bfqg)->q->queue_lock);
if (unlikely(!parent))
return;
bfqg_stats_add_aux(&parent->stats, &bfqg->stats);
bfqg_stats_reset(&bfqg->stats);
}
void bfq_init_entity(struct bfq_entity *entity, struct bfq_group *bfqg)
{
struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
entity->weight = entity->new_weight;
entity->orig_weight = entity->new_weight;
if (bfqq) {
bfqq->ioprio = bfqq->new_ioprio;
bfqq->ioprio_class = bfqq->new_ioprio_class;
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
/*
* Make sure that bfqg and its associated blkg do not
* disappear before entity.
*/
bfqg_and_blkg_get(bfqg);
}
entity->parent = bfqg->my_entity; /* NULL for root group */
entity->sched_data = &bfqg->sched_data;
}
static void bfqg_stats_exit(struct bfqg_stats *stats)
{
blkg_rwstat_exit(&stats->bytes);
blkg_rwstat_exit(&stats->ios);
#ifdef CONFIG_BFQ_CGROUP_DEBUG
blkg_rwstat_exit(&stats->merged);
blkg_rwstat_exit(&stats->service_time);
blkg_rwstat_exit(&stats->wait_time);
blkg_rwstat_exit(&stats->queued);
bfq_stat_exit(&stats->time);
bfq_stat_exit(&stats->avg_queue_size_sum);
bfq_stat_exit(&stats->avg_queue_size_samples);
bfq_stat_exit(&stats->dequeue);
bfq_stat_exit(&stats->group_wait_time);
bfq_stat_exit(&stats->idle_time);
bfq_stat_exit(&stats->empty_time);
2017-11-13 14:34:10 +08:00
#endif
}
static int bfqg_stats_init(struct bfqg_stats *stats, gfp_t gfp)
{
if (blkg_rwstat_init(&stats->bytes, gfp) ||
blkg_rwstat_init(&stats->ios, gfp))
goto error;
#ifdef CONFIG_BFQ_CGROUP_DEBUG
if (blkg_rwstat_init(&stats->merged, gfp) ||
blkg_rwstat_init(&stats->service_time, gfp) ||
blkg_rwstat_init(&stats->wait_time, gfp) ||
blkg_rwstat_init(&stats->queued, gfp) ||
bfq_stat_init(&stats->time, gfp) ||
bfq_stat_init(&stats->avg_queue_size_sum, gfp) ||
bfq_stat_init(&stats->avg_queue_size_samples, gfp) ||
bfq_stat_init(&stats->dequeue, gfp) ||
bfq_stat_init(&stats->group_wait_time, gfp) ||
bfq_stat_init(&stats->idle_time, gfp) ||
bfq_stat_init(&stats->empty_time, gfp))
goto error;
2017-11-13 14:34:10 +08:00
#endif
return 0;
error:
bfqg_stats_exit(stats);
return -ENOMEM;
}
static struct bfq_group_data *cpd_to_bfqgd(struct blkcg_policy_data *cpd)
{
return cpd ? container_of(cpd, struct bfq_group_data, pd) : NULL;
}
static struct bfq_group_data *blkcg_to_bfqgd(struct blkcg *blkcg)
{
return cpd_to_bfqgd(blkcg_to_cpd(blkcg, &blkcg_policy_bfq));
}
static struct blkcg_policy_data *bfq_cpd_alloc(gfp_t gfp)
{
struct bfq_group_data *bgd;
bgd = kzalloc(sizeof(*bgd), gfp);
if (!bgd)
return NULL;
bgd->weight = CGROUP_WEIGHT_DFL;
return &bgd->pd;
}
static void bfq_cpd_free(struct blkcg_policy_data *cpd)
{
kfree(cpd_to_bfqgd(cpd));
}
static struct blkg_policy_data *bfq_pd_alloc(struct gendisk *disk,
struct blkcg *blkcg, gfp_t gfp)
{
struct bfq_group *bfqg;
bfqg = kzalloc_node(sizeof(*bfqg), gfp, disk->node_id);
if (!bfqg)
return NULL;
if (bfqg_stats_init(&bfqg->stats, gfp)) {
kfree(bfqg);
return NULL;
}
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
/* see comments in bfq_bic_update_cgroup for why refcounting */
refcount_set(&bfqg->ref, 1);
return &bfqg->pd;
}
static void bfq_pd_init(struct blkg_policy_data *pd)
{
struct blkcg_gq *blkg = pd_to_blkg(pd);
struct bfq_group *bfqg = blkg_to_bfqg(blkg);
struct bfq_data *bfqd = blkg->q->elevator->elevator_data;
struct bfq_entity *entity = &bfqg->entity;
struct bfq_group_data *d = blkcg_to_bfqgd(blkg->blkcg);
entity->orig_weight = entity->weight = entity->new_weight = d->weight;
entity->my_sched_data = &bfqg->sched_data;
block, bfq: merge bursts of newly-created queues Many throughput-sensitive workloads are made of several parallel I/O flows, with all flows generated by the same application, or more generically by the same task (e.g., system boot). The most counterproductive action with these workloads is plugging I/O dispatch when one of the bfq_queues associated with these flows remains temporarily empty. To avoid this plugging, BFQ has been using a burst-handling mechanism for years now. This mechanism has proven effective for throughput, and not detrimental for service guarantees. This commit pushes this mechanism a little bit further, basing on the following two facts. First, all the I/O flows of a the same application or task contribute to the execution/completion of that common application or task. So the performance figures that matter are total throughput of the flows and task-wide I/O latency. In particular, these flows do not need to be protected from each other, in terms of individual bandwidth or latency. Second, the above fact holds regardless of the number of flows. Putting these two facts together, this commits merges stably the bfq_queues associated with these I/O flows, i.e., with the processes that generate these IO/ flows, regardless of how many the involved processes are. To decide whether a set of bfq_queues is actually associated with the I/O flows of a common application or task, and to merge these queues stably, this commit operates as follows: given a bfq_queue, say Q2, currently being created, and the last bfq_queue, say Q1, created before Q2, Q2 is merged stably with Q1 if - very little time has elapsed since when Q1 was created - Q2 has the same ioprio as Q1 - Q2 belongs to the same group as Q1 Merging bfq_queues also reduces scheduling overhead. A fio test with ten random readers on /dev/nullb shows a throughput boost of 40%, with a quadcore. Since BFQ's execution time amounts to ~50% of the total per-request processing time, the above throughput boost implies that BFQ's overhead is reduced by more than 50%. Tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Link: https://lore.kernel.org/r/20210304174627.161-7-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-05 01:46:27 +08:00
entity->last_bfqq_created = NULL;
bfqg->my_entity = entity; /*
* the root_group's will be set to NULL
* in bfq_init_queue()
*/
bfqg->bfqd = bfqd;
bfqg->active_entities = 0;
bfqg->num_queues_with_pending_reqs = 0;
bfqg->rq_pos_tree = RB_ROOT;
}
static void bfq_pd_free(struct blkg_policy_data *pd)
{
struct bfq_group *bfqg = pd_to_bfqg(pd);
bfqg_stats_exit(&bfqg->stats);
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
bfqg_put(bfqg);
}
static void bfq_pd_reset_stats(struct blkg_policy_data *pd)
{
struct bfq_group *bfqg = pd_to_bfqg(pd);
bfqg_stats_reset(&bfqg->stats);
}
static void bfq_group_set_parent(struct bfq_group *bfqg,
struct bfq_group *parent)
{
struct bfq_entity *entity;
entity = &bfqg->entity;
entity->parent = parent->my_entity;
entity->sched_data = &parent->sched_data;
}
static void bfq_link_bfqg(struct bfq_data *bfqd, struct bfq_group *bfqg)
{
struct bfq_group *parent;
struct bfq_entity *entity;
/*
* Update chain of bfq_groups as we might be handling a leaf group
* which, along with some of its relatives, has not been hooked yet
* to the private hierarchy of BFQ.
*/
entity = &bfqg->entity;
for_each_entity(entity) {
struct bfq_group *curr_bfqg = container_of(entity,
struct bfq_group, entity);
if (curr_bfqg != bfqd->root_group) {
parent = bfqg_parent(curr_bfqg);
if (!parent)
parent = bfqd->root_group;
bfq_group_set_parent(curr_bfqg, parent);
}
}
}
struct bfq_group *bfq_bio_bfqg(struct bfq_data *bfqd, struct bio *bio)
{
struct blkcg_gq *blkg = bio->bi_blkg;
struct bfq_group *bfqg;
while (blkg) {
block, bfq: fix null pointer dereference in bfq_bio_bfqg() Out test found a following problem in kernel 5.10, and the same problem should exist in mainline: BUG: kernel NULL pointer dereference, address: 0000000000000094 PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 7 PID: 155 Comm: kworker/7:1 Not tainted 5.10.0-01932-g19e0ace2ca1d-dirty 4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-b4 Workqueue: kthrotld blk_throtl_dispatch_work_fn RIP: 0010:bfq_bio_bfqg+0x52/0xc0 Code: 94 00 00 00 00 75 2e 48 8b 40 30 48 83 05 35 06 c8 0b 01 48 85 c0 74 3d 4b RSP: 0018:ffffc90001a1fba0 EFLAGS: 00010002 RAX: ffff888100d60400 RBX: ffff8881132e7000 RCX: 0000000000000000 RDX: 0000000000000017 RSI: ffff888103580a18 RDI: ffff888103580a18 RBP: ffff8881132e7000 R08: 0000000000000000 R09: ffffc90001a1fe10 R10: 0000000000000a20 R11: 0000000000034320 R12: 0000000000000000 R13: ffff888103580a18 R14: ffff888114447000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000094 CR3: 0000000100cdb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: bfq_bic_update_cgroup+0x3c/0x350 ? ioc_create_icq+0x42/0x270 bfq_init_rq+0xfd/0x1060 bfq_insert_requests+0x20f/0x1cc0 ? ioc_create_icq+0x122/0x270 blk_mq_sched_insert_requests+0x86/0x1d0 blk_mq_flush_plug_list+0x193/0x2a0 blk_flush_plug_list+0x127/0x170 blk_finish_plug+0x31/0x50 blk_throtl_dispatch_work_fn+0x151/0x190 process_one_work+0x27c/0x5f0 worker_thread+0x28b/0x6b0 ? rescuer_thread+0x590/0x590 kthread+0x153/0x1b0 ? kthread_flush_work+0x170/0x170 ret_from_fork+0x1f/0x30 Modules linked in: CR2: 0000000000000094 ---[ end trace e2e59ac014314547 ]--- RIP: 0010:bfq_bio_bfqg+0x52/0xc0 Code: 94 00 00 00 00 75 2e 48 8b 40 30 48 83 05 35 06 c8 0b 01 48 85 c0 74 3d 4b RSP: 0018:ffffc90001a1fba0 EFLAGS: 00010002 RAX: ffff888100d60400 RBX: ffff8881132e7000 RCX: 0000000000000000 RDX: 0000000000000017 RSI: ffff888103580a18 RDI: ffff888103580a18 RBP: ffff8881132e7000 R08: 0000000000000000 R09: ffffc90001a1fe10 R10: 0000000000000a20 R11: 0000000000034320 R12: 0000000000000000 R13: ffff888103580a18 R14: ffff888114447000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000094 CR3: 0000000100cdb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Root cause is quite complex: 1) use bfq elevator for the test device. 2) create a cgroup CG 3) config blk throtl in CG blkg_conf_prep blkg_create 4) create a thread T1 and issue async io in CG: bio_init bio_associate_blkg ... submit_bio submit_bio_noacct blk_throtl_bio -> io is throttled // io submit is done 5) switch elevator: bfq_exit_queue blkcg_deactivate_policy list_for_each_entry(blkg, &q->blkg_list, q_node) blkg->pd[] = NULL // bfq policy is removed 5) thread t1 exist, then remove the cgroup CG: blkcg_unpin_online blkcg_destroy_blkgs blkg_destroy list_del_init(&blkg->q_node) // blkg is removed from queue list 6) switch elevator back to bfq bfq_init_queue bfq_create_group_hierarchy blkcg_activate_policy list_for_each_entry_reverse(blkg, &q->blkg_list) // blkg is removed from list, hence bfq policy is still NULL 7) throttled io is dispatched to bfq: bfq_insert_requests bfq_init_rq bfq_bic_update_cgroup bfq_bio_bfqg bfqg = blkg_to_bfqg(blkg) // bfqg is NULL because bfq policy is NULL The problem is only possible in bfq because only bfq can be deactivated and activated while queue is online, while others can only be deactivated while the device is removed. Fix the problem in bfq by checking if blkg is online before calling blkg_to_bfqg(). Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221108103434.2853269-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-08 18:34:34 +08:00
if (!blkg->online) {
blkg = blkg->parent;
continue;
}
bfqg = blkg_to_bfqg(blkg);
if (bfqg->pd.online) {
bio_associate_blkg_from_css(bio, &blkg->blkcg->css);
return bfqg;
}
blkg = blkg->parent;
}
bio_associate_blkg_from_css(bio,
&bfqg_to_blkg(bfqd->root_group)->blkcg->css);
return bfqd->root_group;
}
/**
* bfq_bfqq_move - migrate @bfqq to @bfqg.
* @bfqd: queue descriptor.
* @bfqq: the queue to move.
* @bfqg: the group to move to.
*
* Move @bfqq to @bfqg, deactivating it from its old group and reactivating
* it on the new one. Avoid putting the entity on the old group idle tree.
*
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
* Must be called under the scheduler lock, to make sure that the blkg
* owning @bfqg does not disappear (see comments in
* bfq_bic_update_cgroup on guaranteeing the consistency of blkg
* objects).
*/
void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
struct bfq_group *bfqg)
{
struct bfq_entity *entity = &bfqq->entity;
struct bfq_group *old_parent = bfqq_group(bfqq);
bool has_pending_reqs = false;
/*
* No point to move bfqq to the same group, which can happen when
* root group is offlined
*/
if (old_parent == bfqg)
return;
block, bfq: don't move oom_bfqq Our test report a UAF: [ 2073.019181] ================================================================== [ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584 [ 2073.019192] [ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5 [ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2073.019200] Call trace: [ 2073.019203] dump_backtrace+0x0/0x310 [ 2073.019206] show_stack+0x28/0x38 [ 2073.019210] dump_stack+0xec/0x15c [ 2073.019216] print_address_description+0x68/0x2d0 [ 2073.019220] kasan_report+0x238/0x2f0 [ 2073.019224] __asan_store8+0x88/0xb0 [ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019233] bfq_put_async_queues+0xbc/0x208 [ 2073.019236] bfq_pd_offline+0x178/0x238 [ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019244] bfq_exit_queue+0x128/0x178 [ 2073.019249] blk_mq_exit_sched+0x12c/0x160 [ 2073.019252] elevator_exit+0xc8/0xd0 [ 2073.019256] blk_exit_queue+0x50/0x88 [ 2073.019259] blk_cleanup_queue+0x228/0x3d8 [ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019274] null_exit+0x90/0x114 [null_blk] [ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019282] el0_svc_common+0xc8/0x320 [ 2073.019287] el0_svc_handler+0xf8/0x160 [ 2073.019290] el0_svc+0x10/0x218 [ 2073.019291] [ 2073.019294] Allocated by task 14163: [ 2073.019301] kasan_kmalloc+0xe0/0x190 [ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418 [ 2073.019308] bfq_pd_alloc+0x54/0x118 [ 2073.019313] blkcg_activate_policy+0x250/0x460 [ 2073.019317] bfq_create_group_hierarchy+0x38/0x110 [ 2073.019321] bfq_init_queue+0x6d0/0x948 [ 2073.019325] blk_mq_init_sched+0x1d8/0x390 [ 2073.019330] elevator_switch_mq+0x88/0x170 [ 2073.019334] elevator_switch+0x140/0x270 [ 2073.019338] elv_iosched_store+0x1a4/0x2a0 [ 2073.019342] queue_attr_store+0x90/0xe0 [ 2073.019348] sysfs_kf_write+0xa8/0xe8 [ 2073.019351] kernfs_fop_write+0x1f8/0x378 [ 2073.019359] __vfs_write+0xe0/0x360 [ 2073.019363] vfs_write+0xf0/0x270 [ 2073.019367] ksys_write+0xdc/0x1b8 [ 2073.019371] __arm64_sys_write+0x50/0x60 [ 2073.019375] el0_svc_common+0xc8/0x320 [ 2073.019380] el0_svc_handler+0xf8/0x160 [ 2073.019383] el0_svc+0x10/0x218 [ 2073.019385] [ 2073.019387] Freed by task 72584: [ 2073.019391] __kasan_slab_free+0x120/0x228 [ 2073.019394] kasan_slab_free+0x10/0x18 [ 2073.019397] kfree+0x94/0x368 [ 2073.019400] bfqg_put+0x64/0xb0 [ 2073.019404] bfqg_and_blkg_put+0x90/0xb0 [ 2073.019408] bfq_put_queue+0x220/0x228 [ 2073.019413] __bfq_put_async_bfqq+0x98/0x168 [ 2073.019416] bfq_put_async_queues+0xbc/0x208 [ 2073.019420] bfq_pd_offline+0x178/0x238 [ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019429] bfq_exit_queue+0x128/0x178 [ 2073.019433] blk_mq_exit_sched+0x12c/0x160 [ 2073.019437] elevator_exit+0xc8/0xd0 [ 2073.019440] blk_exit_queue+0x50/0x88 [ 2073.019443] blk_cleanup_queue+0x228/0x3d8 [ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019459] null_exit+0x90/0x114 [null_blk] [ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019467] el0_svc_common+0xc8/0x320 [ 2073.019471] el0_svc_handler+0xf8/0x160 [ 2073.019474] el0_svc+0x10/0x218 [ 2073.019475] [ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00 which belongs to the cache kmalloc-1024 of size 1024 [ 2073.019484] The buggy address is located 552 bytes inside of 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300) [ 2073.019486] The buggy address belongs to the page: [ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0 [ 2073.020123] flags: 0x7ffff0000008100(slab|head) [ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00 [ 2073.020409] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000 [ 2073.020411] page dumped because: kasan: bad access detected [ 2073.020412] [ 2073.020414] Memory state around the buggy address: [ 2073.020420] ffff8000ccf64000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020424] ffff8000ccf64080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020428] >ffff8000ccf64100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020430] ^ [ 2073.020434] ffff8000ccf64180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020438] ffff8000ccf64200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020439] ================================================================== The same problem exist in mainline as well. This is because oom_bfqq is moved to a non-root group, thus root_group is freed earlier. Thus fix the problem by don't move oom_bfqq. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20220129015924.3958918-4-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-29 09:59:24 +08:00
/*
* oom_bfqq is not allowed to move, oom_bfqq will hold ref to root_group
* until elevator exit.
*/
if (bfqq == &bfqd->oom_bfqq)
return;
/*
* Get extra reference to prevent bfqq from being freed in
* next possible expire or deactivate.
*/
bfqq->ref++;
if (entity->in_groups_with_pending_reqs) {
has_pending_reqs = true;
bfq_del_bfqq_in_groups_with_pending_reqs(bfqq);
}
/* If bfqq is empty, then bfq_bfqq_expire also invokes
* bfq_del_bfqq_busy, thereby removing bfqq and its entity
* from data structures related to current group. Otherwise we
* need to remove bfqq explicitly with bfq_deactivate_bfqq, as
* we do below.
*/
if (bfqq == bfqd->in_service_queue)
bfq_bfqq_expire(bfqd, bfqd->in_service_queue,
false, BFQQE_PREEMPTED);
if (bfq_bfqq_busy(bfqq))
bfq_deactivate_bfqq(bfqd, bfqq, false, false);
else if (entity->on_st_or_in_serv)
bfq_put_idle_entity(bfq_entity_service_tree(entity), entity);
bfqg_and_blkg_put(old_parent);
block, bfq: reset last_bfqq_created on group change Since commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"), BFQ maintains a per-group pointer to the last bfq_queue created. If such a queue, say bfqq, happens to move to a different group, then bfqq is no more a valid last bfq_queue created for its previous group. That pointer must then be cleared. Not resetting such a pointer may also cause UAF, if bfqq happens to also be freed after being moved to a different group. This commit performs this missing reset. As such it fixes commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"). Such a missing reset is most likely the cause of the crash reported in [1]. With some analysis, we found that this crash was due to the above UAF. And such UAF did go away with this commit applied [1]. Anyway, before this commit, that crash happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") contains no error related with the above UAF, and can then be restored. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 Fixes: 430a67f9d616 ("block, bfq: merge bursts of newly-created queues") Tested-by: Grzegorz Kowal <custos.mentis@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20211015144336.45894-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-15 22:43:36 +08:00
if (entity->parent &&
entity->parent->last_bfqq_created == bfqq)
entity->parent->last_bfqq_created = NULL;
else if (bfqd->last_bfqq_created == bfqq)
bfqd->last_bfqq_created = NULL;
entity->parent = bfqg->my_entity;
entity->sched_data = &bfqg->sched_data;
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
/* pin down bfqg and its associated blkg */
bfqg_and_blkg_get(bfqg);
if (has_pending_reqs)
bfq_add_bfqq_in_groups_with_pending_reqs(bfqq);
if (bfq_bfqq_busy(bfqq)) {
block, bfq: do not merge queues on flash storage with queueing To boost throughput with a set of processes doing interleaved I/O (i.e., a set of processes whose individual I/O is random, but whose merged cumulative I/O is sequential), BFQ merges the queues associated with these processes, i.e., redirects the I/O of these processes into a common, shared queue. In the shared queue, I/O requests are ordered by their position on the medium, thus sequential I/O gets dispatched to the device when the shared queue is served. Queue merging costs execution time, because, to detect which queues to merge, BFQ must maintain a list of the head I/O requests of active queues, ordered by request positions. Measurements showed that this costs about 10% of BFQ's total per-request processing time. Request processing time becomes more and more critical as the speed of the underlying storage device grows. Yet, fortunately, queue merging is basically useless on the very devices that are so fast to make request processing time critical. To reach a high throughput, these devices must have many requests queued at the same time. But, in this configuration, the internal scheduling algorithms of these devices do also the job of queue merging: they reorder requests so as to obtain as much as possible a sequential I/O pattern. As a consequence, with processes doing interleaved I/O, the throughput reached by one such device is likely to be the same, with and without queue merging. In view of this fact, this commit disables queue merging, and all related housekeeping, for non-rotational devices with internal queueing. The total, single-lock-protected, per-request processing time of BFQ drops to, e.g., 1.9 us on an Intel Core i7-2760QM@2.40GHz (time measured with simple code instrumentation, and using the throughput-sync.sh script of the S suite [1], in performance-profiling mode). To put this result into context, the total, single-lock-protected, per-request execution time of the lightest I/O scheduler available in blk-mq, mq-deadline, is 0.7 us (mq-deadline is ~800 LOC, against ~10500 LOC for BFQ). Disabling merging provides a further, remarkable benefit in terms of throughput. Merging tends to make many workloads artificially more uneven, mainly because of shared queues remaining non empty for incomparably more time than normal queues. So, if, e.g., one of the queues in a set of merged queues has a higher weight than a normal queue, then the shared queue may inherit such a high weight and, by staying almost always active, may force BFQ to perform I/O plugging most of the time. This evidently makes it harder for BFQ to let the device reach a high throughput. As a practical example of this problem, and of the benefits of this commit, we measured again the throughput in the nasty scenario considered in previous commit messages: dbench test (in the Phoronix suite), with 6 clients, on a filesystem with journaling, and with the journaling daemon enjoying a higher weight than normal processes. With this commit, the throughput grows from ~150 MB/s to ~200 MB/s on a PLEXTOR PX-256M5 SSD. This is the same peak throughput reached by any of the other I/O schedulers. As such, this is also likely to be the maximum possible throughput reachable with this workload on this device, because I/O is mostly random, and the other schedulers basically just pass I/O requests to the drive as fast as possible. [1] https://github.com/Algodev-github/S Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Francesco Pollicino <fra.fra.800@gmail.com> Signed-off-by: Alessio Masola <alessio.masola@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-12 16:59:30 +08:00
if (unlikely(!bfqd->nonrot_with_queueing))
bfq_pos_tree_add_move(bfqd, bfqq);
bfq_activate_bfqq(bfqd, bfqq);
}
block, bfq: inject I/O to underutilized actuators The main service scheme of BFQ for sync I/O is serving one sync bfq_queue at a time, for a while. In particular, BFQ enforces this scheme when it deems the latter necessary to boost throughput or to preserve service guarantees. Unfortunately, when BFQ enforces this policy, only one actuator at a time gets served for a while, because each bfq_queue contains I/O only for one actuator. The other actuators may remain underutilized. Actually, BFQ may serve (inject) extra I/O, taken from other bfq_queues, in parallel with that of the in-service queue. This injection mechanism may provide the ground for dealing also with the above actuator-underutilization problem. Yet BFQ does not take the actuator load into account when choosing which queue to pick extra I/O from. In addition, BFQ may happen to inject extra I/O only when the in-service queue is temporarily empty. In view of these facts, this commit extends the injection mechanism in such a way that the latter: (1) takes into account also the actuator load; (2) checks such a load on each dispatch, and injects I/O for an underutilized actuator, if there is one and there is I/O for it. To perform the check in (2), this commit introduces a load threshold, currently set to 4. A linear scan of each actuator is performed, until an actuator is found for which the following two conditions hold: the load of the actuator is below the threshold, and there is at least one non-in-service queue that contains I/O for that actuator. If such a pair (actuator, queue) is found, then the head request of that queue is returned for dispatch, instead of the head request of the in-service queue. We have set the threshold, empirically, to the minimum possible value for which an actuator is fully utilized, or close to be fully utilized. By doing so, injected I/O 'steals' as few drive-queue slots as possibile to the in-service queue. This reduces as much as possible the probability that the service of I/O from the in-service bfq_queue gets delayed because of slot exhaustion, i.e., because all the slots of the drive queue are filled with I/O injected from other queues (NCQ provides for 32 slots). This new mechanism also counters actuator underutilization in the case of asymmetric configurations of bfq_queues. Namely if there are few bfq_queues containing I/O for some actuators and many bfq_queues containing I/O for other actuators. Or if the bfq_queues containing I/O for some actuators have lower weights than the other bfq_queues. Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Davide Zini <davidezini2@gmail.com> Link: https://lore.kernel.org/r/20230103145503.71712-8-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-03 22:55:02 +08:00
if (!bfqd->in_service_queue && !bfqd->tot_rq_in_driver)
bfq_schedule_dispatch(bfqd);
/* release extra ref taken above, bfqq may happen to be freed now */
bfq_put_queue(bfqq);
}
block, bfq: split sync bfq_queues on a per-actuator basis Single-LUN multi-actuator SCSI drives, as well as all multi-actuator SATA drives appear as a single device to the I/O subsystem [1]. Yet they address commands to different actuators internally, as a function of Logical Block Addressing (LBAs). A given sector is reachable by only one of the actuators. For example, Seagate’s Serial Advanced Technology Attachment (SATA) version contains two actuators and maps the lower half of the SATA LBA space to the lower actuator and the upper half to the upper actuator. Evidently, to fully utilize actuators, no actuator must be left idle or underutilized while there is pending I/O for it. The block layer must somehow control the load of each actuator individually. This commit lays the ground for allowing BFQ to provide such a per-actuator control. BFQ associates an I/O-request sync bfq_queue with each process doing synchronous I/O, or with a group of processes, in case of queue merging. Then BFQ serves one bfq_queue at a time. While in service, a bfq_queue is emptied in request-position order. Yet the same process, or group of processes, may generate I/O for different actuators. In this case, different streams of I/O (each for a different actuator) get all inserted into the same sync bfq_queue. So there is basically no individual control on when each stream is served, i.e., on when the I/O requests of the stream are picked from the bfq_queue and dispatched to the drive. This commit enables BFQ to control the service of each actuator individually for synchronous I/O, by simply splitting each sync bfq_queue into N queues, one for each actuator. In other words, a sync bfq_queue is now associated to a pair (process, actuator). As a consequence of this split, the per-queue proportional-share policy implemented by BFQ will guarantee that the sync I/O generated for each actuator, by each process, receives its fair share of service. This is just a preparatory patch. If the I/O of the same process happens to be sent to different queues, then each of these queues may undergo queue merging. To handle this event, the bfq_io_cq data structure must be properly extended. In addition, stable merging must be disabled to avoid loss of control on individual actuators. Finally, also async queues must be split. These issues are described in detail and addressed in next commits. As for this commit, although multiple per-process bfq_queues are provided, the I/O of each process or group of processes is still sent to only one queue, regardless of the actuator the I/O is for. The forwarding to distinct bfq_queues will be enabled after addressing the above issues. [1] https://www.linaro.org/blog/budget-fair-queueing-bfq-linux-io-scheduler-optimizations-for-multi-actuator-sata-hard-drives/ Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Gabriele Felici <felicigb@gmail.com> Signed-off-by: Carmine Zaccagnino <carmine@carminezacc.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20230103145503.71712-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-03 22:54:56 +08:00
static void bfq_sync_bfqq_move(struct bfq_data *bfqd,
struct bfq_queue *sync_bfqq,
struct bfq_io_cq *bic,
struct bfq_group *bfqg,
unsigned int act_idx)
{
struct bfq_queue *bfqq;
if (!sync_bfqq->new_bfqq && !bfq_bfqq_coop(sync_bfqq)) {
/* We are the only user of this bfqq, just move it */
if (sync_bfqq->entity.sched_data != &bfqg->sched_data)
bfq_bfqq_move(bfqd, sync_bfqq, bfqg);
return;
}
/*
* The queue was merged to a different queue. Check
* that the merge chain still belongs to the same
* cgroup.
*/
for (bfqq = sync_bfqq; bfqq; bfqq = bfqq->new_bfqq)
if (bfqq->entity.sched_data != &bfqg->sched_data)
break;
if (bfqq) {
/*
* Some queue changed cgroup so the merge is not valid
* anymore. We cannot easily just cancel the merge (by
* clearing new_bfqq) as there may be other processes
* using this queue and holding refs to all queues
* below sync_bfqq->new_bfqq. Similarly if the merge
* already happened, we need to detach from bfqq now
* so that we cannot merge bio to a request from the
* old cgroup.
*/
bfq_put_cooperator(sync_bfqq);
bic_set_bfqq(bic, NULL, true, act_idx);
for-6.3/block-2023-02-16 -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmPvfncQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpob2EADXJxcr2jjYHm/7cjKkyuVX8fr80dNdMeuY JFdsjG1k6Uj73BVhQQWYTcs/PsrWBHWRsv6uz4WgOELj55eXmf5Q0kJszyUeJW33 /DjqLvtoppVcYf80xE13wKvCfn73BjwQo6xkGM0qAYn15eaXiD/Ax3xC6eJlsBeK PEw7EJyhacbSxZa/1D2B6+mqII1jUQWProTCc3udZ4JHi3WvdWa3Rda0qCqHl4a1 +K2aP2YTFIRPxBzfMNa/CafWVIFubTdht+4Ds6R60RImzB9e0VUBfcsiUyW5Zg7L Fwv7ptXuWrALwVNdW56Oz1QikBxn2pdRR2HMLwKJW1MD8kP9r8LMm2jV5Rhiwe0B OQsGRYkOzBvw+bxeP5fvk0iPGVMz6ActH4gkraA5QdLqayDaFYOadlhqz0uRo5SH Fb42Vl658K/MHDSIk8U58TNkmrsIJsBGohXI9DOGINPPvv3XOPi4Q1HmXkGRmii0 y+lNU/QEGh7xXXew29SPP76uQpQaYfC7NxXCMw/OpOMwehzjsjshmM2lpxi8zsgt PJUmfHv5qxCplNmTJXmUpmX7sS7550HUdu9FJb13DM+gzKg8bk9jWVuLrzqrVlG5 1hKWEl1+heg1heRfaIuJVLbPI0au6Sb4uqhih/PHyrP9TWIoAruDbDJM65GKTxyE 2uEgcHzHQw== =poRc -----END PGP SIGNATURE----- Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux Pull block updates from Jens Axboe: - NVMe updates via Christoph: - Small improvements to the logging functionality (Amit Engel) - Authentication cleanups (Hannes Reinecke) - Cleanup and optimize the DMA mapping cod in the PCIe driver (Keith Busch) - Work around the command effects for Format NVM (Keith Busch) - Misc cleanups (Keith Busch, Christoph Hellwig) - Fix and cleanup freeing single sgl (Keith Busch) - MD updates via Song: - Fix a rare crash during the takeover process - Don't update recovery_cp when curr_resync is ACTIVE - Free writes_pending in md_stop - Change active_io to percpu - Updates to drbd, inching us closer to unifying the out-of-tree driver with the in-tree one (Andreas, Christoph, Lars, Robert) - BFQ update adding support for multi-actuator drives (Paolo, Federico, Davide) - Make brd compliant with REQ_NOWAIT (me) - Fix for IOPOLL and queue entering, fixing stalled IO waiting on timeouts (me) - Fix for REQ_NOWAIT with multiple bios (me) - Fix memory leak in blktrace cleanup (Greg) - Clean up sbitmap and fix a potential hang (Kemeng) - Clean up some bits in BFQ, and fix a bug in the request injection (Kemeng) - Clean up the request allocation and issue code, and fix some bugs related to that (Kemeng) - ublk updates and fixes: - Add support for unprivileged ublk (Ming) - Improve device deletion handling (Ming) - Misc (Liu, Ziyang) - s390 dasd fixes (Alexander, Qiheng) - Improve utility of request caching and fixes (Anuj, Xiao) - zoned cleanups (Pankaj) - More constification for kobjs (Thomas) - blk-iocost cleanups (Yu) - Remove bio splitting from drivers that don't need it (Christoph) - Switch blk-cgroups to use struct gendisk. Some of this is now incomplete as select late reverts were done. (Christoph) - Add bvec initialization helpers, and convert callers to use that rather than open-coding it (Christoph) - Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin, Matthew, Ulf, Zhong) * tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits) brd: use radix_tree_maybe_preload instead of radix_tree_preload block: use proper return value from bio_failfast() block: bio-integrity: Copy flags when bio_integrity_payload is cloned block: Fix io statistics for cgroup in throttle path brd: mark as nowait compatible brd: check for REQ_NOWAIT and set correct page allocation mask brd: return 0/-error from brd_insert_page() block: sync mixed merged request's failfast with 1st bio's Revert "blk-cgroup: pin the gendisk in struct blkcg_gq" Revert "blk-cgroup: pass a gendisk to blkg_lookup" Revert "blk-cgroup: delay blk-cgroup initialization until add_disk" Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release" Revert "blk-cgroup: move the cgroup information to struct gendisk" nvme-pci: remove iod use_sgls nvme-pci: fix freeing single sgl block: ublk: check IO buffer based on flag need_get_data s390/dasd: Fix potential memleak in dasd_eckd_init() s390/dasd: sort out physical vs virtual pointers usage block: Remove the ALLOC_CACHE_SLACK constant block: make kobj_type structures constant ...
2023-02-21 06:27:21 +08:00
bfq_release_process_ref(bfqd, sync_bfqq);
block, bfq: split sync bfq_queues on a per-actuator basis Single-LUN multi-actuator SCSI drives, as well as all multi-actuator SATA drives appear as a single device to the I/O subsystem [1]. Yet they address commands to different actuators internally, as a function of Logical Block Addressing (LBAs). A given sector is reachable by only one of the actuators. For example, Seagate’s Serial Advanced Technology Attachment (SATA) version contains two actuators and maps the lower half of the SATA LBA space to the lower actuator and the upper half to the upper actuator. Evidently, to fully utilize actuators, no actuator must be left idle or underutilized while there is pending I/O for it. The block layer must somehow control the load of each actuator individually. This commit lays the ground for allowing BFQ to provide such a per-actuator control. BFQ associates an I/O-request sync bfq_queue with each process doing synchronous I/O, or with a group of processes, in case of queue merging. Then BFQ serves one bfq_queue at a time. While in service, a bfq_queue is emptied in request-position order. Yet the same process, or group of processes, may generate I/O for different actuators. In this case, different streams of I/O (each for a different actuator) get all inserted into the same sync bfq_queue. So there is basically no individual control on when each stream is served, i.e., on when the I/O requests of the stream are picked from the bfq_queue and dispatched to the drive. This commit enables BFQ to control the service of each actuator individually for synchronous I/O, by simply splitting each sync bfq_queue into N queues, one for each actuator. In other words, a sync bfq_queue is now associated to a pair (process, actuator). As a consequence of this split, the per-queue proportional-share policy implemented by BFQ will guarantee that the sync I/O generated for each actuator, by each process, receives its fair share of service. This is just a preparatory patch. If the I/O of the same process happens to be sent to different queues, then each of these queues may undergo queue merging. To handle this event, the bfq_io_cq data structure must be properly extended. In addition, stable merging must be disabled to avoid loss of control on individual actuators. Finally, also async queues must be split. These issues are described in detail and addressed in next commits. As for this commit, although multiple per-process bfq_queues are provided, the I/O of each process or group of processes is still sent to only one queue, regardless of the actuator the I/O is for. The forwarding to distinct bfq_queues will be enabled after addressing the above issues. [1] https://www.linaro.org/blog/budget-fair-queueing-bfq-linux-io-scheduler-optimizations-for-multi-actuator-sata-hard-drives/ Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Gabriele Felici <felicigb@gmail.com> Signed-off-by: Carmine Zaccagnino <carmine@carminezacc.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20230103145503.71712-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-03 22:54:56 +08:00
}
}
/**
* __bfq_bic_change_cgroup - move @bic to @bfqg.
* @bfqd: the queue descriptor.
* @bic: the bic to move.
* @bfqg: the group to move to.
*
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
* Move bic to blkcg, assuming that bfqd->lock is held; which makes
* sure that the reference to cgroup is valid across the call (see
* comments in bfq_bic_update_cgroup on this issue)
*/
static void __bfq_bic_change_cgroup(struct bfq_data *bfqd,
struct bfq_io_cq *bic,
struct bfq_group *bfqg)
{
block, bfq: split sync bfq_queues on a per-actuator basis Single-LUN multi-actuator SCSI drives, as well as all multi-actuator SATA drives appear as a single device to the I/O subsystem [1]. Yet they address commands to different actuators internally, as a function of Logical Block Addressing (LBAs). A given sector is reachable by only one of the actuators. For example, Seagate’s Serial Advanced Technology Attachment (SATA) version contains two actuators and maps the lower half of the SATA LBA space to the lower actuator and the upper half to the upper actuator. Evidently, to fully utilize actuators, no actuator must be left idle or underutilized while there is pending I/O for it. The block layer must somehow control the load of each actuator individually. This commit lays the ground for allowing BFQ to provide such a per-actuator control. BFQ associates an I/O-request sync bfq_queue with each process doing synchronous I/O, or with a group of processes, in case of queue merging. Then BFQ serves one bfq_queue at a time. While in service, a bfq_queue is emptied in request-position order. Yet the same process, or group of processes, may generate I/O for different actuators. In this case, different streams of I/O (each for a different actuator) get all inserted into the same sync bfq_queue. So there is basically no individual control on when each stream is served, i.e., on when the I/O requests of the stream are picked from the bfq_queue and dispatched to the drive. This commit enables BFQ to control the service of each actuator individually for synchronous I/O, by simply splitting each sync bfq_queue into N queues, one for each actuator. In other words, a sync bfq_queue is now associated to a pair (process, actuator). As a consequence of this split, the per-queue proportional-share policy implemented by BFQ will guarantee that the sync I/O generated for each actuator, by each process, receives its fair share of service. This is just a preparatory patch. If the I/O of the same process happens to be sent to different queues, then each of these queues may undergo queue merging. To handle this event, the bfq_io_cq data structure must be properly extended. In addition, stable merging must be disabled to avoid loss of control on individual actuators. Finally, also async queues must be split. These issues are described in detail and addressed in next commits. As for this commit, although multiple per-process bfq_queues are provided, the I/O of each process or group of processes is still sent to only one queue, regardless of the actuator the I/O is for. The forwarding to distinct bfq_queues will be enabled after addressing the above issues. [1] https://www.linaro.org/blog/budget-fair-queueing-bfq-linux-io-scheduler-optimizations-for-multi-actuator-sata-hard-drives/ Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Gabriele Felici <felicigb@gmail.com> Signed-off-by: Carmine Zaccagnino <carmine@carminezacc.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20230103145503.71712-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-03 22:54:56 +08:00
unsigned int act_idx;
block, bfq: split sync bfq_queues on a per-actuator basis Single-LUN multi-actuator SCSI drives, as well as all multi-actuator SATA drives appear as a single device to the I/O subsystem [1]. Yet they address commands to different actuators internally, as a function of Logical Block Addressing (LBAs). A given sector is reachable by only one of the actuators. For example, Seagate’s Serial Advanced Technology Attachment (SATA) version contains two actuators and maps the lower half of the SATA LBA space to the lower actuator and the upper half to the upper actuator. Evidently, to fully utilize actuators, no actuator must be left idle or underutilized while there is pending I/O for it. The block layer must somehow control the load of each actuator individually. This commit lays the ground for allowing BFQ to provide such a per-actuator control. BFQ associates an I/O-request sync bfq_queue with each process doing synchronous I/O, or with a group of processes, in case of queue merging. Then BFQ serves one bfq_queue at a time. While in service, a bfq_queue is emptied in request-position order. Yet the same process, or group of processes, may generate I/O for different actuators. In this case, different streams of I/O (each for a different actuator) get all inserted into the same sync bfq_queue. So there is basically no individual control on when each stream is served, i.e., on when the I/O requests of the stream are picked from the bfq_queue and dispatched to the drive. This commit enables BFQ to control the service of each actuator individually for synchronous I/O, by simply splitting each sync bfq_queue into N queues, one for each actuator. In other words, a sync bfq_queue is now associated to a pair (process, actuator). As a consequence of this split, the per-queue proportional-share policy implemented by BFQ will guarantee that the sync I/O generated for each actuator, by each process, receives its fair share of service. This is just a preparatory patch. If the I/O of the same process happens to be sent to different queues, then each of these queues may undergo queue merging. To handle this event, the bfq_io_cq data structure must be properly extended. In addition, stable merging must be disabled to avoid loss of control on individual actuators. Finally, also async queues must be split. These issues are described in detail and addressed in next commits. As for this commit, although multiple per-process bfq_queues are provided, the I/O of each process or group of processes is still sent to only one queue, regardless of the actuator the I/O is for. The forwarding to distinct bfq_queues will be enabled after addressing the above issues. [1] https://www.linaro.org/blog/budget-fair-queueing-bfq-linux-io-scheduler-optimizations-for-multi-actuator-sata-hard-drives/ Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Gabriele Felici <felicigb@gmail.com> Signed-off-by: Carmine Zaccagnino <carmine@carminezacc.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20230103145503.71712-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-03 22:54:56 +08:00
for (act_idx = 0; act_idx < bfqd->num_actuators; act_idx++) {
struct bfq_queue *async_bfqq = bic_to_bfqq(bic, false, act_idx);
struct bfq_queue *sync_bfqq = bic_to_bfqq(bic, true, act_idx);
block, bfq: split sync bfq_queues on a per-actuator basis Single-LUN multi-actuator SCSI drives, as well as all multi-actuator SATA drives appear as a single device to the I/O subsystem [1]. Yet they address commands to different actuators internally, as a function of Logical Block Addressing (LBAs). A given sector is reachable by only one of the actuators. For example, Seagate’s Serial Advanced Technology Attachment (SATA) version contains two actuators and maps the lower half of the SATA LBA space to the lower actuator and the upper half to the upper actuator. Evidently, to fully utilize actuators, no actuator must be left idle or underutilized while there is pending I/O for it. The block layer must somehow control the load of each actuator individually. This commit lays the ground for allowing BFQ to provide such a per-actuator control. BFQ associates an I/O-request sync bfq_queue with each process doing synchronous I/O, or with a group of processes, in case of queue merging. Then BFQ serves one bfq_queue at a time. While in service, a bfq_queue is emptied in request-position order. Yet the same process, or group of processes, may generate I/O for different actuators. In this case, different streams of I/O (each for a different actuator) get all inserted into the same sync bfq_queue. So there is basically no individual control on when each stream is served, i.e., on when the I/O requests of the stream are picked from the bfq_queue and dispatched to the drive. This commit enables BFQ to control the service of each actuator individually for synchronous I/O, by simply splitting each sync bfq_queue into N queues, one for each actuator. In other words, a sync bfq_queue is now associated to a pair (process, actuator). As a consequence of this split, the per-queue proportional-share policy implemented by BFQ will guarantee that the sync I/O generated for each actuator, by each process, receives its fair share of service. This is just a preparatory patch. If the I/O of the same process happens to be sent to different queues, then each of these queues may undergo queue merging. To handle this event, the bfq_io_cq data structure must be properly extended. In addition, stable merging must be disabled to avoid loss of control on individual actuators. Finally, also async queues must be split. These issues are described in detail and addressed in next commits. As for this commit, although multiple per-process bfq_queues are provided, the I/O of each process or group of processes is still sent to only one queue, regardless of the actuator the I/O is for. The forwarding to distinct bfq_queues will be enabled after addressing the above issues. [1] https://www.linaro.org/blog/budget-fair-queueing-bfq-linux-io-scheduler-optimizations-for-multi-actuator-sata-hard-drives/ Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Gabriele Felici <felicigb@gmail.com> Signed-off-by: Carmine Zaccagnino <carmine@carminezacc.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20230103145503.71712-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-03 22:54:56 +08:00
if (async_bfqq &&
async_bfqq->entity.sched_data != &bfqg->sched_data) {
bic_set_bfqq(bic, NULL, false, act_idx);
bfq_release_process_ref(bfqd, async_bfqq);
}
block, bfq: split sync bfq_queues on a per-actuator basis Single-LUN multi-actuator SCSI drives, as well as all multi-actuator SATA drives appear as a single device to the I/O subsystem [1]. Yet they address commands to different actuators internally, as a function of Logical Block Addressing (LBAs). A given sector is reachable by only one of the actuators. For example, Seagate’s Serial Advanced Technology Attachment (SATA) version contains two actuators and maps the lower half of the SATA LBA space to the lower actuator and the upper half to the upper actuator. Evidently, to fully utilize actuators, no actuator must be left idle or underutilized while there is pending I/O for it. The block layer must somehow control the load of each actuator individually. This commit lays the ground for allowing BFQ to provide such a per-actuator control. BFQ associates an I/O-request sync bfq_queue with each process doing synchronous I/O, or with a group of processes, in case of queue merging. Then BFQ serves one bfq_queue at a time. While in service, a bfq_queue is emptied in request-position order. Yet the same process, or group of processes, may generate I/O for different actuators. In this case, different streams of I/O (each for a different actuator) get all inserted into the same sync bfq_queue. So there is basically no individual control on when each stream is served, i.e., on when the I/O requests of the stream are picked from the bfq_queue and dispatched to the drive. This commit enables BFQ to control the service of each actuator individually for synchronous I/O, by simply splitting each sync bfq_queue into N queues, one for each actuator. In other words, a sync bfq_queue is now associated to a pair (process, actuator). As a consequence of this split, the per-queue proportional-share policy implemented by BFQ will guarantee that the sync I/O generated for each actuator, by each process, receives its fair share of service. This is just a preparatory patch. If the I/O of the same process happens to be sent to different queues, then each of these queues may undergo queue merging. To handle this event, the bfq_io_cq data structure must be properly extended. In addition, stable merging must be disabled to avoid loss of control on individual actuators. Finally, also async queues must be split. These issues are described in detail and addressed in next commits. As for this commit, although multiple per-process bfq_queues are provided, the I/O of each process or group of processes is still sent to only one queue, regardless of the actuator the I/O is for. The forwarding to distinct bfq_queues will be enabled after addressing the above issues. [1] https://www.linaro.org/blog/budget-fair-queueing-bfq-linux-io-scheduler-optimizations-for-multi-actuator-sata-hard-drives/ Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Gabriele Felici <felicigb@gmail.com> Signed-off-by: Carmine Zaccagnino <carmine@carminezacc.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20230103145503.71712-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-03 22:54:56 +08:00
if (sync_bfqq)
bfq_sync_bfqq_move(bfqd, sync_bfqq, bic, bfqg, act_idx);
}
}
void bfq_bic_update_cgroup(struct bfq_io_cq *bic, struct bio *bio)
{
struct bfq_data *bfqd = bic_to_bfqd(bic);
struct bfq_group *bfqg = bfq_bio_bfqg(bfqd, bio);
uint64_t serial_nr;
serial_nr = bfqg_to_blkg(bfqg)->blkcg->css.serial_nr;
/*
* Check whether blkcg has changed. The condition may trigger
* spuriously on a newly created cic but there's no harm.
*/
if (unlikely(!bfqd) || likely(bic->blkcg_serial_nr == serial_nr))
return;
/*
* New cgroup for this process. Make sure it is linked to bfq internal
* cgroup hierarchy.
*/
bfq_link_bfqg(bfqd, bfqg);
__bfq_bic_change_cgroup(bfqd, bic, bfqg);
block, bfq: access and cache blkg data only when safe In blk-cgroup, operations on blkg objects are protected with the request_queue lock. This is no more the lock that protects I/O-scheduler operations in blk-mq. In fact, the latter are now protected with a finer-grained per-scheduler-instance lock. As a consequence, although blkg lookups are also rcu-protected, blk-mq I/O schedulers may see inconsistent data when they access blkg and blkg-related objects. BFQ does access these objects, and does incur this problem, in the following case. The blkg_lookup performed in bfq_get_queue, being protected (only) through rcu, may happen to return the address of a copy of the original blkg. If this is the case, then the blkg_get performed in bfq_get_queue, to pin down the blkg, is useless: it does not prevent blk-cgroup code from destroying both the original blkg and all objects directly or indirectly referred by the copy of the blkg. BFQ accesses these objects, which typically causes a crash for NULL-pointer dereference of memory-protection violation. Some additional protection mechanism should be added to blk-cgroup to address this issue. In the meantime, this commit provides a quick temporary fix for BFQ: cache (when safe) blkg data that might disappear right after a blkg_lookup. In particular, this commit exploits the following facts to achieve its goal without introducing further locks. Destroy operations on a blkg invoke, as a first step, hooks of the scheduler associated with the blkg. And these hooks are executed with bfqd->lock held for BFQ. As a consequence, for any blkg associated with the request queue an instance of BFQ is attached to, we are guaranteed that such a blkg is not destroyed, and that all the pointers it contains are consistent, while that instance is holding its bfqd->lock. A blkg_lookup performed with bfqd->lock held then returns a fully consistent blkg, which remains consistent until this lock is held. In more detail, this holds even if the returned blkg is a copy of the original one. Finally, also the object describing a group inside BFQ needs to be protected from destruction on the blkg_free of the original blkg (which invokes bfq_pd_free). This commit adds private refcounting for this object, to let it disappear only after no bfq_queue refers to it any longer. This commit also removes or updates some stale comments on locking issues related to blk-cgroup operations. Reported-by: Tomas Konir <tomas.konir@gmail.com> Reported-by: Lee Tibbert <lee.tibbert@gmail.com> Reported-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Tomas Konir <tomas.konir@gmail.com> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Marco Piazza <mpiazza@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-05 16:11:15 +08:00
/*
* Update blkg_path for bfq_log_* functions. We cache this
* path, and update it here, for the following
* reasons. Operations on blkg objects in blk-cgroup are
* protected with the request_queue lock, and not with the
* lock that protects the instances of this scheduler
* (bfqd->lock). This exposes BFQ to the following sort of
* race.
*
* The blkg_lookup performed in bfq_get_queue, protected
* through rcu, may happen to return the address of a copy of
* the original blkg. If this is the case, then the
* bfqg_and_blkg_get performed in bfq_get_queue, to pin down
* the blkg, is useless: it does not prevent blk-cgroup code
* from destroying both the original blkg and all objects
* directly or indirectly referred by the copy of the
* blkg.
*
* On the bright side, destroy operations on a blkg invoke, as
* a first step, hooks of the scheduler associated with the
* blkg. And these hooks are executed with bfqd->lock held for
* BFQ. As a consequence, for any blkg associated with the
* request queue this instance of the scheduler is attached
* to, we are guaranteed that such a blkg is not destroyed, and
* that all the pointers it contains are consistent, while we
* are holding bfqd->lock. A blkg_lookup performed with
* bfqd->lock held then returns a fully consistent blkg, which
* remains consistent until this lock is held.
*
* Thanks to the last fact, and to the fact that: (1) bfqg has
* been obtained through a blkg_lookup in the above
* assignment, and (2) bfqd->lock is being held, here we can
* safely use the policy data for the involved blkg (i.e., the
* field bfqg->pd) to get to the blkg associated with bfqg,
* and then we can safely use any field of blkg. After we
* release bfqd->lock, even just getting blkg through this
* bfqg may cause dangling references to be traversed, as
* bfqg->pd may not exist any more.
*
* In view of the above facts, here we cache, in the bfqg, any
* blkg data we may need for this bic, and for its associated
* bfq_queue. As of now, we need to cache only the path of the
* blkg, which is used in the bfq_log_* functions.
*
* Finally, note that bfqg itself needs to be protected from
* destruction on the blkg_free of the original blkg (which
* invokes bfq_pd_free). We use an additional private
* refcounter for bfqg, to let it disappear only after no
* bfq_queue refers to it any longer.
*/
blkg_path(bfqg_to_blkg(bfqg), bfqg->blkg_path, sizeof(bfqg->blkg_path));
bic->blkcg_serial_nr = serial_nr;
}
/**
* bfq_flush_idle_tree - deactivate any entity on the idle tree of @st.
* @st: the service tree being flushed.
*/
static void bfq_flush_idle_tree(struct bfq_service_tree *st)
{
struct bfq_entity *entity = st->first_idle;
for (; entity ; entity = st->first_idle)
__bfq_deactivate_entity(entity, false);
}
/**
* bfq_reparent_leaf_entity - move leaf entity to the root_group.
* @bfqd: the device data structure with the root group.
* @entity: the entity to move, if entity is a leaf; or the parent entity
* of an active leaf entity to move, if entity is not a leaf.
* @ioprio_class: I/O priority class to reparent.
*/
static void bfq_reparent_leaf_entity(struct bfq_data *bfqd,
struct bfq_entity *entity,
int ioprio_class)
{
struct bfq_queue *bfqq;
struct bfq_entity *child_entity = entity;
while (child_entity->my_sched_data) { /* leaf not reached yet */
struct bfq_sched_data *child_sd = child_entity->my_sched_data;
struct bfq_service_tree *child_st = child_sd->service_tree +
ioprio_class;
struct rb_root *child_active = &child_st->active;
child_entity = bfq_entity_of(rb_first(child_active));
if (!child_entity)
child_entity = child_sd->in_service_entity;
}
bfqq = bfq_entity_to_bfqq(child_entity);
bfq_bfqq_move(bfqd, bfqq, bfqd->root_group);
}
/**
* bfq_reparent_active_queues - move to the root group all active queues.
* @bfqd: the device data structure with the root group.
* @bfqg: the group to move from.
* @st: the service tree to start the search from.
* @ioprio_class: I/O priority class to reparent.
*/
static void bfq_reparent_active_queues(struct bfq_data *bfqd,
struct bfq_group *bfqg,
struct bfq_service_tree *st,
int ioprio_class)
{
struct rb_root *active = &st->active;
struct bfq_entity *entity;
while ((entity = bfq_entity_of(rb_first(active))))
bfq_reparent_leaf_entity(bfqd, entity, ioprio_class);
if (bfqg->sched_data.in_service_entity)
bfq_reparent_leaf_entity(bfqd,
bfqg->sched_data.in_service_entity,
ioprio_class);
}
/**
* bfq_pd_offline - deactivate the entity associated with @pd,
* and reparent its children entities.
* @pd: descriptor of the policy going offline.
*
* blkio already grabs the queue_lock for us, so no need to use
* RCU-based magic
*/
static void bfq_pd_offline(struct blkg_policy_data *pd)
{
struct bfq_service_tree *st;
struct bfq_group *bfqg = pd_to_bfqg(pd);
struct bfq_data *bfqd = bfqg->bfqd;
struct bfq_entity *entity = bfqg->my_entity;
unsigned long flags;
int i;
spin_lock_irqsave(&bfqd->lock, flags);
if (!entity) /* root group */
goto put_async_queues;
/*
* Empty all service_trees belonging to this group before
* deactivating the group itself.
*/
for (i = 0; i < BFQ_IOPRIO_CLASSES; i++) {
st = bfqg->sched_data.service_tree + i;
/*
* It may happen that some queues are still active
* (busy) upon group destruction (if the corresponding
* processes have been forced to terminate). We move
* all the leaf entities corresponding to these queues
* to the root_group.
* Also, it may happen that the group has an entity
* in service, which is disconnected from the active
* tree: it must be moved, too.
* There is no need to put the sync queues, as the
* scheduler has taken no reference.
*/
bfq_reparent_active_queues(bfqd, bfqg, st, i);
/*
* The idle tree may still contain bfq_queues
* belonging to exited task because they never
* migrated to a different cgroup from the one being
* destroyed now. In addition, even
* bfq_reparent_active_queues() may happen to add some
* entities to the idle tree. It happens if, in some
* of the calls to bfq_bfqq_move() performed by
* bfq_reparent_active_queues(), the queue to move is
* empty and gets expired.
*/
bfq_flush_idle_tree(st);
}
__bfq_deactivate_entity(entity, false);
put_async_queues:
bfq_put_async_queues(bfqd, bfqg);
spin_unlock_irqrestore(&bfqd->lock, flags);
/*
* @blkg is going offline and will be ignored by
* blkg_[rw]stat_recursive_sum(). Transfer stats to the parent so
* that they don't get lost. If IOs complete after this point, the
* stats for them will be lost. Oh well...
*/
bfqg_stats_xfer_dead(bfqg);
}
void bfq_end_wr_async(struct bfq_data *bfqd)
{
struct blkcg_gq *blkg;
list_for_each_entry(blkg, &bfqd->queue->blkg_list, q_node) {
struct bfq_group *bfqg = blkg_to_bfqg(blkg);
bfq_end_wr_async_queues(bfqd, bfqg);
}
bfq_end_wr_async_queues(bfqd, bfqd->root_group);
}
static int bfq_io_show_weight_legacy(struct seq_file *sf, void *v)
{
struct blkcg *blkcg = css_to_blkcg(seq_css(sf));
struct bfq_group_data *bfqgd = blkcg_to_bfqgd(blkcg);
unsigned int val = 0;
if (bfqgd)
val = bfqgd->weight;
seq_printf(sf, "%u\n", val);
return 0;
}
static u64 bfqg_prfill_weight_device(struct seq_file *sf,
struct blkg_policy_data *pd, int off)
{
struct bfq_group *bfqg = pd_to_bfqg(pd);
if (!bfqg->entity.dev_weight)
return 0;
return __blkg_prfill_u64(sf, pd, bfqg->entity.dev_weight);
}
static int bfq_io_show_weight(struct seq_file *sf, void *v)
{
struct blkcg *blkcg = css_to_blkcg(seq_css(sf));
struct bfq_group_data *bfqgd = blkcg_to_bfqgd(blkcg);
seq_printf(sf, "default %u\n", bfqgd->weight);
blkcg_print_blkgs(sf, blkcg, bfqg_prfill_weight_device,
&blkcg_policy_bfq, 0, false);
return 0;
}
static void bfq_group_set_weight(struct bfq_group *bfqg, u64 weight, u64 dev_weight)
{
weight = dev_weight ?: weight;
bfqg->entity.dev_weight = dev_weight;
/*
* Setting the prio_changed flag of the entity
* to 1 with new_weight == weight would re-set
* the value of the weight to its ioprio mapping.
* Set the flag only if necessary.
*/
if ((unsigned short)weight != bfqg->entity.new_weight) {
bfqg->entity.new_weight = (unsigned short)weight;
/*
* Make sure that the above new value has been
* stored in bfqg->entity.new_weight before
* setting the prio_changed flag. In fact,
* this flag may be read asynchronously (in
* critical sections protected by a different
* lock than that held here), and finding this
* flag set may cause the execution of the code
* for updating parameters whose value may
* depend also on bfqg->entity.new_weight (in
* __bfq_entity_update_weight_prio).
* This barrier makes sure that the new value
* of bfqg->entity.new_weight is correctly
* seen in that code.
*/
smp_wmb();
bfqg->entity.prio_changed = 1;
}
}
static int bfq_io_set_weight_legacy(struct cgroup_subsys_state *css,
struct cftype *cftype,
u64 val)
{
struct blkcg *blkcg = css_to_blkcg(css);
struct bfq_group_data *bfqgd = blkcg_to_bfqgd(blkcg);
struct blkcg_gq *blkg;
int ret = -ERANGE;
if (val < BFQ_MIN_WEIGHT || val > BFQ_MAX_WEIGHT)
return ret;
ret = 0;
spin_lock_irq(&blkcg->lock);
bfqgd->weight = (unsigned short)val;
hlist_for_each_entry(blkg, &blkcg->blkg_list, blkcg_node) {
struct bfq_group *bfqg = blkg_to_bfqg(blkg);
if (bfqg)
bfq_group_set_weight(bfqg, val, 0);
}
spin_unlock_irq(&blkcg->lock);
return ret;
}
static ssize_t bfq_io_set_device_weight(struct kernfs_open_file *of,
char *buf, size_t nbytes,
loff_t off)
{
int ret;
struct blkg_conf_ctx ctx;
struct blkcg *blkcg = css_to_blkcg(of_css(of));
struct bfq_group *bfqg;
u64 v;
blkcg: Restructure blkg_conf_prep() and friends We want to support lazy init of rq-qos policies so that iolatency is enabled lazily on configuration instead of gendisk initialization. The way blkg config helpers are structured now is a bit awkward for that. Let's restructure: * blkcg_conf_open_bdev() is renamed to blkg_conf_open_bdev(). The blkcg_ prefix was used because the bdev opening step is blkg-independent. However, the distinction is too subtle and confuses more than helps. Let's switch to blkg prefix so that it's consistent with the type and other helper names. * struct blkg_conf_ctx now remembers the original input string and is always initialized by the new blkg_conf_init(). * blkg_conf_open_bdev() is updated to take a pointer to blkg_conf_ctx like blkg_conf_prep() and can be called multiple times safely. Instead of modifying the double pointer to input string directly, blkg_conf_open_bdev() now sets blkg_conf_ctx->body. * blkg_conf_finish() is renamed to blkg_conf_exit() for symmetry and now must be called on all blkg_conf_ctx's which were initialized with blkg_conf_init(). Combined, this allows the users to either open the bdev first or do it altogether with blkg_conf_prep() which will help implementing lazy init of rq-qos policies. blkg_conf_init/exit() will also be used implement synchronization against device removal. This is necessary because iolat / iocost are configured through cgroupfs instead of one of the files under /sys/block/DEVICE. As cgroupfs operations aren't synchronized with block layer, the lazy init and other configuration operations may race against device removal. This patch makes blkg_conf_init/exit() used consistently for all cgroup-orginating configurations making them a good place to implement explicit synchronization. Users are updated accordingly. No behavior change is intended by this patch. v2: bfq wasn't updated in v1 causing a build error. Fixed. v3: Update the description to include future use of blkg_conf_init/exit() as synchronization points. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yu Kuai <yukuai1@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230413000649.115785-3-tj@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 08:06:47 +08:00
blkg_conf_init(&ctx, buf);
ret = blkg_conf_prep(blkcg, &blkcg_policy_bfq, &ctx);
if (ret)
blkcg: Restructure blkg_conf_prep() and friends We want to support lazy init of rq-qos policies so that iolatency is enabled lazily on configuration instead of gendisk initialization. The way blkg config helpers are structured now is a bit awkward for that. Let's restructure: * blkcg_conf_open_bdev() is renamed to blkg_conf_open_bdev(). The blkcg_ prefix was used because the bdev opening step is blkg-independent. However, the distinction is too subtle and confuses more than helps. Let's switch to blkg prefix so that it's consistent with the type and other helper names. * struct blkg_conf_ctx now remembers the original input string and is always initialized by the new blkg_conf_init(). * blkg_conf_open_bdev() is updated to take a pointer to blkg_conf_ctx like blkg_conf_prep() and can be called multiple times safely. Instead of modifying the double pointer to input string directly, blkg_conf_open_bdev() now sets blkg_conf_ctx->body. * blkg_conf_finish() is renamed to blkg_conf_exit() for symmetry and now must be called on all blkg_conf_ctx's which were initialized with blkg_conf_init(). Combined, this allows the users to either open the bdev first or do it altogether with blkg_conf_prep() which will help implementing lazy init of rq-qos policies. blkg_conf_init/exit() will also be used implement synchronization against device removal. This is necessary because iolat / iocost are configured through cgroupfs instead of one of the files under /sys/block/DEVICE. As cgroupfs operations aren't synchronized with block layer, the lazy init and other configuration operations may race against device removal. This patch makes blkg_conf_init/exit() used consistently for all cgroup-orginating configurations making them a good place to implement explicit synchronization. Users are updated accordingly. No behavior change is intended by this patch. v2: bfq wasn't updated in v1 causing a build error. Fixed. v3: Update the description to include future use of blkg_conf_init/exit() as synchronization points. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yu Kuai <yukuai1@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230413000649.115785-3-tj@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 08:06:47 +08:00
goto out;
if (sscanf(ctx.body, "%llu", &v) == 1) {
/* require "default" on dfl */
ret = -ERANGE;
if (!v)
goto out;
} else if (!strcmp(strim(ctx.body), "default")) {
v = 0;
} else {
ret = -EINVAL;
goto out;
}
bfqg = blkg_to_bfqg(ctx.blkg);
ret = -ERANGE;
if (!v || (v >= BFQ_MIN_WEIGHT && v <= BFQ_MAX_WEIGHT)) {
bfq_group_set_weight(bfqg, bfqg->entity.weight, v);
ret = 0;
}
out:
blkcg: Restructure blkg_conf_prep() and friends We want to support lazy init of rq-qos policies so that iolatency is enabled lazily on configuration instead of gendisk initialization. The way blkg config helpers are structured now is a bit awkward for that. Let's restructure: * blkcg_conf_open_bdev() is renamed to blkg_conf_open_bdev(). The blkcg_ prefix was used because the bdev opening step is blkg-independent. However, the distinction is too subtle and confuses more than helps. Let's switch to blkg prefix so that it's consistent with the type and other helper names. * struct blkg_conf_ctx now remembers the original input string and is always initialized by the new blkg_conf_init(). * blkg_conf_open_bdev() is updated to take a pointer to blkg_conf_ctx like blkg_conf_prep() and can be called multiple times safely. Instead of modifying the double pointer to input string directly, blkg_conf_open_bdev() now sets blkg_conf_ctx->body. * blkg_conf_finish() is renamed to blkg_conf_exit() for symmetry and now must be called on all blkg_conf_ctx's which were initialized with blkg_conf_init(). Combined, this allows the users to either open the bdev first or do it altogether with blkg_conf_prep() which will help implementing lazy init of rq-qos policies. blkg_conf_init/exit() will also be used implement synchronization against device removal. This is necessary because iolat / iocost are configured through cgroupfs instead of one of the files under /sys/block/DEVICE. As cgroupfs operations aren't synchronized with block layer, the lazy init and other configuration operations may race against device removal. This patch makes blkg_conf_init/exit() used consistently for all cgroup-orginating configurations making them a good place to implement explicit synchronization. Users are updated accordingly. No behavior change is intended by this patch. v2: bfq wasn't updated in v1 causing a build error. Fixed. v3: Update the description to include future use of blkg_conf_init/exit() as synchronization points. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yu Kuai <yukuai1@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230413000649.115785-3-tj@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 08:06:47 +08:00
blkg_conf_exit(&ctx);
return ret ?: nbytes;
}
static ssize_t bfq_io_set_weight(struct kernfs_open_file *of,
char *buf, size_t nbytes,
loff_t off)
{
char *endp;
int ret;
u64 v;
buf = strim(buf);
/* "WEIGHT" or "default WEIGHT" sets the default weight */
v = simple_strtoull(buf, &endp, 0);
if (*endp == '\0' || sscanf(buf, "default %llu", &v) == 1) {
ret = bfq_io_set_weight_legacy(of_css(of), NULL, v);
return ret ?: nbytes;
}
return bfq_io_set_device_weight(of, buf, nbytes, off);
}
static int bfqg_print_rwstat(struct seq_file *sf, void *v)
{
blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)), blkg_prfill_rwstat,
&blkcg_policy_bfq, seq_cft(sf)->private, true);
return 0;
}
static u64 bfqg_prfill_rwstat_recursive(struct seq_file *sf,
struct blkg_policy_data *pd, int off)
{
struct blkg_rwstat_sample sum;
blkg_rwstat_recursive_sum(pd_to_blkg(pd), &blkcg_policy_bfq, off, &sum);
return __blkg_prfill_rwstat(sf, pd, &sum);
}
static int bfqg_print_rwstat_recursive(struct seq_file *sf, void *v)
{
blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
bfqg_prfill_rwstat_recursive, &blkcg_policy_bfq,
seq_cft(sf)->private, true);
return 0;
}
#ifdef CONFIG_BFQ_CGROUP_DEBUG
static int bfqg_print_stat(struct seq_file *sf, void *v)
{
blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)), blkg_prfill_stat,
&blkcg_policy_bfq, seq_cft(sf)->private, false);
return 0;
}
static u64 bfqg_prfill_stat_recursive(struct seq_file *sf,
struct blkg_policy_data *pd, int off)
{
struct blkcg_gq *blkg = pd_to_blkg(pd);
struct blkcg_gq *pos_blkg;
struct cgroup_subsys_state *pos_css;
u64 sum = 0;
lockdep_assert_held(&blkg->q->queue_lock);
rcu_read_lock();
blkg_for_each_descendant_pre(pos_blkg, pos_css, blkg) {
struct bfq_stat *stat;
if (!pos_blkg->online)
continue;
stat = (void *)blkg_to_pd(pos_blkg, &blkcg_policy_bfq) + off;
sum += bfq_stat_read(stat) + atomic64_read(&stat->aux_cnt);
}
rcu_read_unlock();
return __blkg_prfill_u64(sf, pd, sum);
}
static int bfqg_print_stat_recursive(struct seq_file *sf, void *v)
{
blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
bfqg_prfill_stat_recursive, &blkcg_policy_bfq,
seq_cft(sf)->private, false);
return 0;
}
static u64 bfqg_prfill_sectors(struct seq_file *sf, struct blkg_policy_data *pd,
int off)
{
struct bfq_group *bfqg = blkg_to_bfqg(pd->blkg);
u64 sum = blkg_rwstat_total(&bfqg->stats.bytes);
return __blkg_prfill_u64(sf, pd, sum >> 9);
}
static int bfqg_print_stat_sectors(struct seq_file *sf, void *v)
{
blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
bfqg_prfill_sectors, &blkcg_policy_bfq, 0, false);
return 0;
}
static u64 bfqg_prfill_sectors_recursive(struct seq_file *sf,
struct blkg_policy_data *pd, int off)
{
struct blkg_rwstat_sample tmp;
blkg_rwstat_recursive_sum(pd->blkg, &blkcg_policy_bfq,
offsetof(struct bfq_group, stats.bytes), &tmp);
return __blkg_prfill_u64(sf, pd,
(tmp.cnt[BLKG_RWSTAT_READ] + tmp.cnt[BLKG_RWSTAT_WRITE]) >> 9);
}
static int bfqg_print_stat_sectors_recursive(struct seq_file *sf, void *v)
{
blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
bfqg_prfill_sectors_recursive, &blkcg_policy_bfq, 0,
false);
return 0;
}
static u64 bfqg_prfill_avg_queue_size(struct seq_file *sf,
struct blkg_policy_data *pd, int off)
{
struct bfq_group *bfqg = pd_to_bfqg(pd);
u64 samples = bfq_stat_read(&bfqg->stats.avg_queue_size_samples);
u64 v = 0;
if (samples) {
v = bfq_stat_read(&bfqg->stats.avg_queue_size_sum);
v = div64_u64(v, samples);
}
__blkg_prfill_u64(sf, pd, v);
return 0;
}
/* print avg_queue_size */
static int bfqg_print_avg_queue_size(struct seq_file *sf, void *v)
{
blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
bfqg_prfill_avg_queue_size, &blkcg_policy_bfq,
0, false);
return 0;
}
#endif /* CONFIG_BFQ_CGROUP_DEBUG */
struct bfq_group *bfq_create_group_hierarchy(struct bfq_data *bfqd, int node)
{
int ret;
ret = blkcg_activate_policy(bfqd->queue->disk, &blkcg_policy_bfq);
if (ret)
return NULL;
return blkg_to_bfqg(bfqd->queue->root_blkg);
}
struct blkcg_policy blkcg_policy_bfq = {
.dfl_cftypes = bfq_blkg_files,
.legacy_cftypes = bfq_blkcg_legacy_files,
.cpd_alloc_fn = bfq_cpd_alloc,
.cpd_free_fn = bfq_cpd_free,
.pd_alloc_fn = bfq_pd_alloc,
.pd_init_fn = bfq_pd_init,
.pd_offline_fn = bfq_pd_offline,
.pd_free_fn = bfq_pd_free,
.pd_reset_stats_fn = bfq_pd_reset_stats,
};
struct cftype bfq_blkcg_legacy_files[] = {
{
.name = "bfq.weight",
.flags = CFTYPE_NOT_ON_ROOT,
.seq_show = bfq_io_show_weight_legacy,
.write_u64 = bfq_io_set_weight_legacy,
},
{
.name = "bfq.weight_device",
.flags = CFTYPE_NOT_ON_ROOT,
.seq_show = bfq_io_show_weight,
.write = bfq_io_set_weight,
},
/* statistics, covers only the tasks in the bfqg */
{
.name = "bfq.io_service_bytes",
.private = offsetof(struct bfq_group, stats.bytes),
.seq_show = bfqg_print_rwstat,
},
{
.name = "bfq.io_serviced",
.private = offsetof(struct bfq_group, stats.ios),
.seq_show = bfqg_print_rwstat,
},
#ifdef CONFIG_BFQ_CGROUP_DEBUG
2017-11-13 14:34:10 +08:00
{
.name = "bfq.time",
.private = offsetof(struct bfq_group, stats.time),
.seq_show = bfqg_print_stat,
},
{
.name = "bfq.sectors",
.seq_show = bfqg_print_stat_sectors,
},
{
.name = "bfq.io_service_time",
.private = offsetof(struct bfq_group, stats.service_time),
.seq_show = bfqg_print_rwstat,
},
{
.name = "bfq.io_wait_time",
.private = offsetof(struct bfq_group, stats.wait_time),
.seq_show = bfqg_print_rwstat,
},
{
.name = "bfq.io_merged",
.private = offsetof(struct bfq_group, stats.merged),
.seq_show = bfqg_print_rwstat,
},
{
.name = "bfq.io_queued",
.private = offsetof(struct bfq_group, stats.queued),
.seq_show = bfqg_print_rwstat,
},
#endif /* CONFIG_BFQ_CGROUP_DEBUG */
/* the same statistics which cover the bfqg and its descendants */
{
.name = "bfq.io_service_bytes_recursive",
.private = offsetof(struct bfq_group, stats.bytes),
.seq_show = bfqg_print_rwstat_recursive,
},
{
.name = "bfq.io_serviced_recursive",
.private = offsetof(struct bfq_group, stats.ios),
.seq_show = bfqg_print_rwstat_recursive,
},
#ifdef CONFIG_BFQ_CGROUP_DEBUG
2017-11-13 14:34:10 +08:00
{
.name = "bfq.time_recursive",
.private = offsetof(struct bfq_group, stats.time),
.seq_show = bfqg_print_stat_recursive,
},
{
.name = "bfq.sectors_recursive",
.seq_show = bfqg_print_stat_sectors_recursive,
},
{
.name = "bfq.io_service_time_recursive",
.private = offsetof(struct bfq_group, stats.service_time),
.seq_show = bfqg_print_rwstat_recursive,
},
{
.name = "bfq.io_wait_time_recursive",
.private = offsetof(struct bfq_group, stats.wait_time),
.seq_show = bfqg_print_rwstat_recursive,
},
{
.name = "bfq.io_merged_recursive",
.private = offsetof(struct bfq_group, stats.merged),
.seq_show = bfqg_print_rwstat_recursive,
},
{
.name = "bfq.io_queued_recursive",
.private = offsetof(struct bfq_group, stats.queued),
.seq_show = bfqg_print_rwstat_recursive,
},
{
.name = "bfq.avg_queue_size",
.seq_show = bfqg_print_avg_queue_size,
},
{
.name = "bfq.group_wait_time",
.private = offsetof(struct bfq_group, stats.group_wait_time),
.seq_show = bfqg_print_stat,
},
{
.name = "bfq.idle_time",
.private = offsetof(struct bfq_group, stats.idle_time),
.seq_show = bfqg_print_stat,
},
{
.name = "bfq.empty_time",
.private = offsetof(struct bfq_group, stats.empty_time),
.seq_show = bfqg_print_stat,
},
{
.name = "bfq.dequeue",
.private = offsetof(struct bfq_group, stats.dequeue),
.seq_show = bfqg_print_stat,
},
#endif /* CONFIG_BFQ_CGROUP_DEBUG */
{ } /* terminate */
};
struct cftype bfq_blkg_files[] = {
{
.name = "bfq.weight",
.flags = CFTYPE_NOT_ON_ROOT,
.seq_show = bfq_io_show_weight,
.write = bfq_io_set_weight,
},
{} /* terminate */
};
#else /* CONFIG_BFQ_GROUP_IOSCHED */
void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
struct bfq_group *bfqg) {}
void bfq_init_entity(struct bfq_entity *entity, struct bfq_group *bfqg)
{
struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
entity->weight = entity->new_weight;
entity->orig_weight = entity->new_weight;
if (bfqq) {
bfqq->ioprio = bfqq->new_ioprio;
bfqq->ioprio_class = bfqq->new_ioprio_class;
}
entity->sched_data = &bfqg->sched_data;
}
void bfq_bic_update_cgroup(struct bfq_io_cq *bic, struct bio *bio) {}
void bfq_end_wr_async(struct bfq_data *bfqd)
{
bfq_end_wr_async_queues(bfqd, bfqd->root_group);
}
struct bfq_group *bfq_bio_bfqg(struct bfq_data *bfqd, struct bio *bio)
{
return bfqd->root_group;
}
struct bfq_group *bfqq_group(struct bfq_queue *bfqq)
{
return bfqq->bfqd->root_group;
}
void bfqg_and_blkg_put(struct bfq_group *bfqg) {}
struct bfq_group *bfq_create_group_hierarchy(struct bfq_data *bfqd, int node)
{
struct bfq_group *bfqg;
int i;
bfqg = kmalloc_node(sizeof(*bfqg), GFP_KERNEL | __GFP_ZERO, node);
if (!bfqg)
return NULL;
for (i = 0; i < BFQ_IOPRIO_CLASSES; i++)
bfqg->sched_data.service_tree[i] = BFQ_SERVICE_TREE_INIT;
return bfqg;
}
#endif /* CONFIG_BFQ_GROUP_IOSCHED */