2012-02-10 12:12:21 +08:00
|
|
|
/*
|
|
|
|
|
* SAMSUNG SMDK5250 board device tree source
|
|
|
|
|
*
|
|
|
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
|
|
|
* http://www.samsung.com
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
|
* published by the Free Software Foundation.
|
2014-09-23 22:53:20 +08:00
|
|
|
*/
|
2012-02-10 12:12:21 +08:00
|
|
|
|
|
|
|
|
/dts-v1/;
|
2014-09-23 22:53:20 +08:00
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
2013-06-17 23:02:08 +08:00
|
|
|
#include "exynos5250.dtsi"
|
2012-02-10 12:12:21 +08:00
|
|
|
|
|
|
|
|
/ {
|
|
|
|
|
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
|
2014-03-21 01:17:22 +08:00
|
|
|
compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
|
2012-02-10 12:12:21 +08:00
|
|
|
|
2012-09-26 08:02:59 +08:00
|
|
|
aliases {
|
|
|
|
|
};
|
|
|
|
|
|
2016-09-01 17:06:56 +08:00
|
|
|
memory@40000000 {
|
2016-09-01 17:06:53 +08:00
|
|
|
device_type = "memory";
|
2012-02-10 12:12:21 +08:00
|
|
|
reg = <0x40000000 0x80000000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
chosen {
|
2012-09-21 10:04:20 +08:00
|
|
|
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
|
2012-02-10 12:12:21 +08:00
|
|
|
};
|
2012-05-15 22:47:53 +08:00
|
|
|
|
ARM: dts: exynos: Fix DTC unit name warnings in Exynos5250
Fix following DTC warnings in all Exynos5250 boards:
Warning (unit_address_vs_reg): Node /dp-controller@145B0000/display-timings/timing@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000/dwc3 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /hdmi has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /mixer has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /video-phy@10040720 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12C70000/trackpad has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/embedded-controller has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/power-regulator has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c@12CA0000/embedded-controller has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-06 10:00:45 +08:00
|
|
|
vdd: fixed-regulator-vdd {
|
2013-06-18 05:38:13 +08:00
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
regulator-name = "vdd-supply";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: dts: exynos: Fix DTC unit name warnings in Exynos5250
Fix following DTC warnings in all Exynos5250 boards:
Warning (unit_address_vs_reg): Node /dp-controller@145B0000/display-timings/timing@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000/dwc3 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /hdmi has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /mixer has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /video-phy@10040720 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12C70000/trackpad has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/embedded-controller has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/power-regulator has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c@12CA0000/embedded-controller has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-06 10:00:45 +08:00
|
|
|
dbvdd: fixed-regulator-dbvdd {
|
2013-06-18 05:38:13 +08:00
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
regulator-name = "dbvdd-supply";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: dts: exynos: Fix DTC unit name warnings in Exynos5250
Fix following DTC warnings in all Exynos5250 boards:
Warning (unit_address_vs_reg): Node /dp-controller@145B0000/display-timings/timing@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000/dwc3 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /hdmi has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /mixer has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /video-phy@10040720 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12C70000/trackpad has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/embedded-controller has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/power-regulator has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c@12CA0000/embedded-controller has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-06 10:00:45 +08:00
|
|
|
spkvdd: fixed-regulator-spkvdd {
|
2013-06-18 05:38:13 +08:00
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
regulator-name = "spkvdd-supply";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
sound {
|
|
|
|
|
compatible = "samsung,smdk-wm8994";
|
2012-05-15 22:47:53 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
samsung,i2s-controller = <&i2s0>;
|
|
|
|
|
samsung,audio-codec = <&wm8994>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
fixed-rate-clocks {
|
|
|
|
|
xxti {
|
|
|
|
|
compatible = "samsung,clock-xxti";
|
|
|
|
|
clock-frequency = <24000000>;
|
2012-05-15 22:47:53 +08:00
|
|
|
};
|
2013-01-18 19:47:06 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
codec_mclk: codec-mclk {
|
|
|
|
|
compatible = "fixed-clock";
|
|
|
|
|
#clock-cells = <0>;
|
|
|
|
|
clock-frequency = <16934000>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
2013-06-18 05:38:13 +08:00
|
|
|
|
2015-07-01 21:10:36 +08:00
|
|
|
&cpu0 {
|
|
|
|
|
cpu0-supply = <&buck2_reg>;
|
|
|
|
|
};
|
|
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
&dp {
|
|
|
|
|
samsung,color-space = <0>;
|
|
|
|
|
samsung,color-depth = <1>;
|
|
|
|
|
samsung,link-rate = <0x0a>;
|
|
|
|
|
samsung,lane-count = <4>;
|
|
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&dp_hpd>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
display-timings {
|
|
|
|
|
native-mode = <&timing0>;
|
|
|
|
|
|
ARM: dts: exynos: Fix DTC unit name warnings in Exynos5250
Fix following DTC warnings in all Exynos5250 boards:
Warning (unit_address_vs_reg): Node /dp-controller@145B0000/display-timings/timing@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /usb@12000000/dwc3 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /hdmi has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /mixer has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /video-phy@10040720 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /fixed-regulator@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12C70000/trackpad has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c@12CD0000/lvds-bridge@20/ports/port@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/embedded-controller has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c-arbitrator/i2c@0/power-regulator has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c@12CA0000/embedded-controller has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-04-06 10:00:45 +08:00
|
|
|
timing0: timing {
|
2014-09-23 22:53:20 +08:00
|
|
|
/* 1280x800 */
|
|
|
|
|
clock-frequency = <50000>;
|
|
|
|
|
hactive = <1280>;
|
|
|
|
|
vactive = <800>;
|
|
|
|
|
hfront-porch = <4>;
|
|
|
|
|
hback-porch = <4>;
|
|
|
|
|
hsync-len = <4>;
|
|
|
|
|
vback-porch = <4>;
|
|
|
|
|
vfront-porch = <4>;
|
|
|
|
|
vsync-len = <4>;
|
2013-01-18 19:47:06 +08:00
|
|
|
};
|
2012-05-15 22:47:53 +08:00
|
|
|
};
|
2014-09-23 22:53:20 +08:00
|
|
|
};
|
2012-05-15 22:47:53 +08:00
|
|
|
|
2015-09-17 20:48:39 +08:00
|
|
|
&ehci {
|
|
|
|
|
samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&fimd {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
&hdmi {
|
2016-08-24 21:07:16 +08:00
|
|
|
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
|
2014-09-23 22:53:20 +08:00
|
|
|
};
|
2012-11-20 20:02:11 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
&i2c_0 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
samsung,i2c-sda-delay = <100>;
|
|
|
|
|
samsung,i2c-max-bus-freq = <20000>;
|
|
|
|
|
|
|
|
|
|
eeprom@50 {
|
|
|
|
|
compatible = "samsung,s524ad0xd1";
|
|
|
|
|
reg = <0x50>;
|
2012-11-20 20:02:11 +08:00
|
|
|
};
|
|
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
max77686@09 {
|
|
|
|
|
compatible = "maxim,max77686";
|
|
|
|
|
reg = <0x09>;
|
|
|
|
|
interrupt-parent = <&gpx3>;
|
|
|
|
|
interrupts = <2 IRQ_TYPE_NONE>;
|
2015-05-09 01:24:25 +08:00
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&max77686_irq>;
|
|
|
|
|
wakeup-source;
|
2014-09-23 22:53:20 +08:00
|
|
|
|
|
|
|
|
voltage-regulators {
|
|
|
|
|
ldo1_reg: LDO1 {
|
|
|
|
|
regulator-name = "P1.0V_LDO_OUT1";
|
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
2012-10-29 20:51:47 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo2_reg: LDO2 {
|
|
|
|
|
regulator-name = "P1.2V_LDO_OUT2";
|
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
2012-05-15 22:47:53 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo3_reg: LDO3 {
|
|
|
|
|
regulator-name = "P1.8V_LDO_OUT3";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
2012-10-29 20:51:42 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo4_reg: LDO4 {
|
|
|
|
|
regulator-name = "P2.8V_LDO_OUT4";
|
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
|
};
|
2012-10-29 20:51:42 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo5_reg: LDO5 {
|
|
|
|
|
regulator-name = "P1.8V_LDO_OUT5";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
};
|
2014-03-18 06:49:14 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo6_reg: LDO6 {
|
|
|
|
|
regulator-name = "P1.1V_LDO_OUT6";
|
|
|
|
|
regulator-min-microvolt = <1100000>;
|
|
|
|
|
regulator-max-microvolt = <1100000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
2014-03-18 06:49:14 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo7_reg: LDO7 {
|
|
|
|
|
regulator-name = "P1.1V_LDO_OUT7";
|
|
|
|
|
regulator-min-microvolt = <1100000>;
|
|
|
|
|
regulator-max-microvolt = <1100000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
2012-09-26 08:02:59 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo8_reg: LDO8 {
|
|
|
|
|
regulator-name = "P1.0V_LDO_OUT8";
|
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo10_reg: LDO10 {
|
|
|
|
|
regulator-name = "P1.8V_LDO_OUT10";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
2015-08-23 12:59:48 +08:00
|
|
|
regulator-always-on;
|
2014-09-23 22:53:20 +08:00
|
|
|
};
|
2012-09-26 08:02:59 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo11_reg: LDO11 {
|
|
|
|
|
regulator-name = "P1.8V_LDO_OUT11";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
};
|
2013-12-21 07:31:30 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo12_reg: LDO12 {
|
|
|
|
|
regulator-name = "P3.0V_LDO_OUT12";
|
|
|
|
|
regulator-min-microvolt = <3000000>;
|
|
|
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
|
};
|
2012-07-14 09:45:36 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo13_reg: LDO13 {
|
|
|
|
|
regulator-name = "P1.8V_LDO_OUT13";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
2012-07-14 09:45:36 +08:00
|
|
|
};
|
|
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo14_reg: LDO14 {
|
|
|
|
|
regulator-name = "P1.8V_LDO_OUT14";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
2012-07-14 09:45:36 +08:00
|
|
|
};
|
|
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
ldo15_reg: LDO15 {
|
|
|
|
|
regulator-name = "P1.0V_LDO_OUT15";
|
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo16_reg: LDO16 {
|
|
|
|
|
regulator-name = "P1.8V_LDO_OUT16";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
buck1_reg: BUCK1 {
|
|
|
|
|
regulator-name = "vdd_mif";
|
|
|
|
|
regulator-min-microvolt = <950000>;
|
|
|
|
|
regulator-max-microvolt = <1300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
buck2_reg: BUCK2 {
|
|
|
|
|
regulator-name = "vdd_arm";
|
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
buck3_reg: BUCK3 {
|
|
|
|
|
regulator-name = "vdd_int";
|
|
|
|
|
regulator-min-microvolt = <900000>;
|
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
buck4_reg: BUCK4 {
|
|
|
|
|
regulator-name = "vdd_g3d";
|
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
|
regulator-max-microvolt = <1300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
buck5_reg: BUCK5 {
|
|
|
|
|
regulator-name = "P1.8V_BUCK_OUT5";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
2012-07-14 09:45:36 +08:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
2014-09-23 22:53:20 +08:00
|
|
|
};
|
2012-07-14 09:45:36 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
&i2c_1 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
samsung,i2c-sda-delay = <100>;
|
|
|
|
|
samsung,i2c-max-bus-freq = <20000>;
|
2012-11-22 03:30:32 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
eeprom@51 {
|
|
|
|
|
compatible = "samsung,s524ad0xd1";
|
|
|
|
|
reg = <0x51>;
|
2012-10-23 21:51:33 +08:00
|
|
|
};
|
2013-01-18 19:47:04 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
wm8994: wm8994@1a {
|
|
|
|
|
compatible = "wlf,wm8994";
|
|
|
|
|
reg = <0x1a>;
|
|
|
|
|
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
|
|
|
|
|
clocks = <&codec_mclk>;
|
|
|
|
|
clock-names = "MCLK1";
|
|
|
|
|
|
|
|
|
|
AVDD2-supply = <&vdd>;
|
|
|
|
|
CPVDD-supply = <&vdd>;
|
|
|
|
|
DBVDD-supply = <&dbvdd>;
|
|
|
|
|
SPKVDD1-supply = <&spkvdd>;
|
|
|
|
|
SPKVDD2-supply = <&spkvdd>;
|
2013-01-18 19:47:04 +08:00
|
|
|
};
|
2014-09-23 22:53:20 +08:00
|
|
|
};
|
2013-01-18 19:47:04 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
&i2c_2 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
samsung,i2c-sda-delay = <100>;
|
|
|
|
|
samsung,i2c-max-bus-freq = <66000>;
|
2013-01-18 19:47:06 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
hdmiddc@50 {
|
|
|
|
|
compatible = "samsung,exynos4210-hdmiddc";
|
|
|
|
|
reg = <0x50>;
|
2013-01-18 19:47:06 +08:00
|
|
|
};
|
2014-09-23 22:53:20 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&i2c_8 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
samsung,i2c-sda-delay = <100>;
|
|
|
|
|
samsung,i2c-max-bus-freq = <66000>;
|
2013-02-13 03:11:58 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
hdmiphy@38 {
|
|
|
|
|
compatible = "samsung,exynos4212-hdmiphy";
|
|
|
|
|
reg = <0x38>;
|
2013-02-13 07:24:15 +08:00
|
|
|
};
|
2014-09-23 22:53:20 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&i2c_9 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
samsung,i2c-sda-delay = <100>;
|
|
|
|
|
samsung,i2c-max-bus-freq = <40000>;
|
|
|
|
|
samsung,i2c-slave-addr = <0x38>;
|
2013-02-13 07:24:15 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
sata_phy_i2c: sata-phy@38 {
|
|
|
|
|
compatible = "samsung,exynos-sataphy-i2c";
|
|
|
|
|
reg = <0x38>;
|
2013-02-13 03:11:58 +08:00
|
|
|
};
|
2014-09-23 22:53:20 +08:00
|
|
|
};
|
2013-03-09 16:19:22 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
&i2s0 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&mmc_0 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
num-slots = <1>;
|
|
|
|
|
broken-cd;
|
|
|
|
|
card-detect-delay = <200>;
|
|
|
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
|
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
|
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
|
|
|
|
|
bus-width = <8>;
|
|
|
|
|
cap-mmc-highspeed;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&mmc_2 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
num-slots = <1>;
|
|
|
|
|
card-detect-delay = <200>;
|
|
|
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
|
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
|
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
|
|
|
|
|
bus-width = <4>;
|
|
|
|
|
disable-wp;
|
|
|
|
|
cap-sd-highspeed;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&rtc {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&sata {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&sata_phy {
|
|
|
|
|
status = "okay";
|
|
|
|
|
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&spi_1 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
|
|
|
|
|
w25q80bw@0 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
compatible = "w25x80";
|
|
|
|
|
reg = <0>;
|
|
|
|
|
spi-max-frequency = <1000000>;
|
|
|
|
|
|
|
|
|
|
controller-data {
|
|
|
|
|
samsung,spi-feedback-delay = <0>;
|
2013-04-04 14:59:46 +08:00
|
|
|
};
|
|
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
partition@0 {
|
|
|
|
|
label = "U-Boot";
|
|
|
|
|
reg = <0x0 0x40000>;
|
|
|
|
|
read-only;
|
2013-03-09 16:19:22 +08:00
|
|
|
};
|
2013-12-21 06:24:26 +08:00
|
|
|
|
2014-09-23 22:53:20 +08:00
|
|
|
partition@40000 {
|
|
|
|
|
label = "Kernel";
|
|
|
|
|
reg = <0x40000 0xc0000>;
|
2013-12-21 06:24:26 +08:00
|
|
|
};
|
2013-03-09 16:19:22 +08:00
|
|
|
};
|
2012-02-10 12:12:21 +08:00
|
|
|
};
|
2015-05-09 01:24:25 +08:00
|
|
|
|
|
|
|
|
&pinctrl_0 {
|
|
|
|
|
max77686_irq: max77686-irq {
|
|
|
|
|
samsung,pins = "gpx3-2";
|
2016-09-04 19:04:11 +08:00
|
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
|
|
|
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
|
|
|
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
|
2015-05-09 01:24:25 +08:00
|
|
|
};
|
|
|
|
|
};
|
