linux/drivers/gpu/drm/tilcdc/Kconfig

config DRM_TILCDC
	tristate "DRM Support for TI LCDC Display Controller"
	depends on DRM && OF && ARM
	select DRM_KMS_HELPER
	select DRM_KMS_CMA_HELPER
	select DRM_GEM_CMA_HELPER
	select OF_VIDEOMODE
	select OF_DISPLAY_TIMING
	select BACKLIGHT_CLASS_DEVICE
	help
	  Choose this option if you have an TI SoC with LCDC display
	  controller, for example AM33xx in beagle-bone, DA8xx, or
	  OMAP-L1xx.  This driver replaces the FB_DA8XX fbdev driver.
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net> 2013-01-09 05:04:28 +08:00			`config DRM_TILCDC`
			`tristate "DRM Support for TI LCDC Display Controller"`
drm/tilcdc: only build on arm [airlied: hack for now until we fix cma helpers on other OF platforms] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dave Airlie <airlied@linux.ie> 2013-02-26 07:54:48 +08:00			`depends on DRM && OF && ARM`
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net> 2013-01-09 05:04:28 +08:00			`select DRM_KMS_HELPER`
			`select DRM_KMS_CMA_HELPER`
			`select DRM_GEM_CMA_HELPER`
drm/tilcdc: add support for LCD panels (v5) Add an output panel driver for LCD panels. Tested with LCD3 cape on beaglebone. v1: original v2: s/of_find_node_by_name()/of_get_child_by_name()/ from Pantelis Antoniou v3: add backlight support v4: rebase to latest of video timing helpers v5: remove some unneeded fields from panel-info struct, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net> 2012-12-19 07:34:16 +08:00			`select OF_VIDEOMODE`
			`select OF_DISPLAY_TIMING`
			`select BACKLIGHT_CLASS_DEVICE`
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net> 2013-01-09 05:04:28 +08:00			`help`
			`Choose this option if you have an TI SoC with LCDC display`
			`controller, for example AM33xx in beagle-bone, DA8xx, or`
			`OMAP-L1xx. This driver replaces the FB_DA8XX fbdev driver.`