linux/fs/btrfs/zoned.h

358 lines
9.9 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef BTRFS_ZONED_H
#define BTRFS_ZONED_H
#include <linux/types.h>
#include <linux/blkdev.h>
btrfs: implement log-structured superblock for ZONED mode Superblock (and its copies) is the only data structure in btrfs which has a fixed location on a device. Since we cannot overwrite in a sequential write required zone, we cannot place superblock in the zone. One easy solution is limiting superblock and copies to be placed only in conventional zones. However, this method has two downsides: one is reduced number of superblock copies. The location of the second copy of superblock is 256GB, which is in a sequential write required zone on typical devices in the market today. So, the number of superblock and copies is limited to be two. Second downside is that we cannot support devices which have no conventional zones at all. To solve these two problems, we employ superblock log writing. It uses two adjacent zones as a circular buffer to write updated superblocks. Once the first zone is filled up, start writing into the second one. Then, when both zones are filled up and before starting to write to the first zone again, it reset the first zone. We can determine the position of the latest superblock by reading write pointer information from a device. One corner case is when both zones are full. For this situation, we read out the last superblock of each zone, and compare them to determine which zone is older. The following zones are reserved as the circular buffer on ZONED btrfs. - The primary superblock: zones 0 and 1 - The first copy: zones 16 and 17 - The second copy: zones 1024 or zone at 256GB which is minimum, and next to it If these reserved zones are conventional, superblock is written fixed at the start of the zone without logging. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-10 19:26:14 +08:00
#include "volumes.h"
#include "disk-io.h"
#include "block-group.h"
/*
* Block groups with more than this value (percents) of unusable space will be
* scheduled for background reclaim.
*/
#define BTRFS_DEFAULT_RECLAIM_THRESH 75
struct btrfs_zoned_device_info {
/*
* Number of zones, zone size and types of zones if bdev is a
* zoned block device.
*/
u64 zone_size;
u8 zone_size_shift;
u32 nr_zones;
unsigned int max_active_zones;
atomic_t active_zones_left;
unsigned long *seq_zones;
unsigned long *empty_zones;
unsigned long *active_zones;
struct blk_zone *zone_cache;
btrfs: implement log-structured superblock for ZONED mode Superblock (and its copies) is the only data structure in btrfs which has a fixed location on a device. Since we cannot overwrite in a sequential write required zone, we cannot place superblock in the zone. One easy solution is limiting superblock and copies to be placed only in conventional zones. However, this method has two downsides: one is reduced number of superblock copies. The location of the second copy of superblock is 256GB, which is in a sequential write required zone on typical devices in the market today. So, the number of superblock and copies is limited to be two. Second downside is that we cannot support devices which have no conventional zones at all. To solve these two problems, we employ superblock log writing. It uses two adjacent zones as a circular buffer to write updated superblocks. Once the first zone is filled up, start writing into the second one. Then, when both zones are filled up and before starting to write to the first zone again, it reset the first zone. We can determine the position of the latest superblock by reading write pointer information from a device. One corner case is when both zones are full. For this situation, we read out the last superblock of each zone, and compare them to determine which zone is older. The following zones are reserved as the circular buffer on ZONED btrfs. - The primary superblock: zones 0 and 1 - The first copy: zones 16 and 17 - The second copy: zones 1024 or zone at 256GB which is minimum, and next to it If these reserved zones are conventional, superblock is written fixed at the start of the zone without logging. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-10 19:26:14 +08:00
struct blk_zone sb_zones[2 * BTRFS_SUPER_MIRROR_MAX];
};
#ifdef CONFIG_BLK_DEV_ZONED
int btrfs_get_dev_zone(struct btrfs_device *device, u64 pos,
struct blk_zone *zone);
int btrfs_get_dev_zone_info_all_devices(struct btrfs_fs_info *fs_info);
int btrfs_get_dev_zone_info(struct btrfs_device *device, bool populate_cache);
void btrfs_destroy_dev_zone_info(struct btrfs_device *device);
int btrfs_check_zoned_mode(struct btrfs_fs_info *fs_info);
btrfs: disallow space_cache in ZONED mode As updates to the space cache v1 are in-place, the space cache cannot be located over sequential zones and there is no guarantees that the device will have enough conventional zones to store this cache. Resolve this problem by disabling completely the space cache v1. This does not introduce any problems with sequential block groups: all the free space is located after the allocation pointer and no free space before the pointer. There is no need to have such cache. Note: we can technically use free-space-tree (space cache v2) on ZONED mode. But, since ZONED mode now always allocates extents in a block group sequentially regardless of underlying device zone type, it's no use to enable and maintain the tree. For the same reason, NODATACOW is also disabled. In summary, ZONED will disable: | Disabled features | Reason | |-------------------+-----------------------------------------------------| | RAID/DUP | Cannot handle two zone append writes to different | | | zones | |-------------------+-----------------------------------------------------| | space_cache (v1) | In-place updating | | NODATACOW | In-place updating | |-------------------+-----------------------------------------------------| | fallocate | Reserved extent will be a write hole | |-------------------+-----------------------------------------------------| | MIXED_BG | Allocated metadata region will be write holes for | | | data writes | Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-10 19:26:10 +08:00
int btrfs_check_mountopts_zoned(struct btrfs_fs_info *info);
btrfs: implement log-structured superblock for ZONED mode Superblock (and its copies) is the only data structure in btrfs which has a fixed location on a device. Since we cannot overwrite in a sequential write required zone, we cannot place superblock in the zone. One easy solution is limiting superblock and copies to be placed only in conventional zones. However, this method has two downsides: one is reduced number of superblock copies. The location of the second copy of superblock is 256GB, which is in a sequential write required zone on typical devices in the market today. So, the number of superblock and copies is limited to be two. Second downside is that we cannot support devices which have no conventional zones at all. To solve these two problems, we employ superblock log writing. It uses two adjacent zones as a circular buffer to write updated superblocks. Once the first zone is filled up, start writing into the second one. Then, when both zones are filled up and before starting to write to the first zone again, it reset the first zone. We can determine the position of the latest superblock by reading write pointer information from a device. One corner case is when both zones are full. For this situation, we read out the last superblock of each zone, and compare them to determine which zone is older. The following zones are reserved as the circular buffer on ZONED btrfs. - The primary superblock: zones 0 and 1 - The first copy: zones 16 and 17 - The second copy: zones 1024 or zone at 256GB which is minimum, and next to it If these reserved zones are conventional, superblock is written fixed at the start of the zone without logging. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-10 19:26:14 +08:00
int btrfs_sb_log_location_bdev(struct block_device *bdev, int mirror, int rw,
u64 *bytenr_ret);
int btrfs_sb_log_location(struct btrfs_device *device, int mirror, int rw,
u64 *bytenr_ret);
int btrfs_advance_sb_log(struct btrfs_device *device, int mirror);
btrfs: implement log-structured superblock for ZONED mode Superblock (and its copies) is the only data structure in btrfs which has a fixed location on a device. Since we cannot overwrite in a sequential write required zone, we cannot place superblock in the zone. One easy solution is limiting superblock and copies to be placed only in conventional zones. However, this method has two downsides: one is reduced number of superblock copies. The location of the second copy of superblock is 256GB, which is in a sequential write required zone on typical devices in the market today. So, the number of superblock and copies is limited to be two. Second downside is that we cannot support devices which have no conventional zones at all. To solve these two problems, we employ superblock log writing. It uses two adjacent zones as a circular buffer to write updated superblocks. Once the first zone is filled up, start writing into the second one. Then, when both zones are filled up and before starting to write to the first zone again, it reset the first zone. We can determine the position of the latest superblock by reading write pointer information from a device. One corner case is when both zones are full. For this situation, we read out the last superblock of each zone, and compare them to determine which zone is older. The following zones are reserved as the circular buffer on ZONED btrfs. - The primary superblock: zones 0 and 1 - The first copy: zones 16 and 17 - The second copy: zones 1024 or zone at 256GB which is minimum, and next to it If these reserved zones are conventional, superblock is written fixed at the start of the zone without logging. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-10 19:26:14 +08:00
int btrfs_reset_sb_log_zones(struct block_device *bdev, int mirror);
2021-02-04 18:21:48 +08:00
u64 btrfs_find_allocatable_zones(struct btrfs_device *device, u64 hole_start,
u64 hole_end, u64 num_bytes);
int btrfs_reset_device_zone(struct btrfs_device *device, u64 physical,
u64 length, u64 *bytes);
int btrfs_ensure_empty_zones(struct btrfs_device *device, u64 start, u64 size);
int btrfs_load_block_group_zone_info(struct btrfs_block_group *cache, bool new);
void btrfs_calc_zone_unusable(struct btrfs_block_group *cache);
void btrfs_redirty_list_add(struct btrfs_transaction *trans,
struct extent_buffer *eb);
void btrfs_free_redirty_list(struct btrfs_transaction *trans);
bool btrfs_use_zone_append(struct btrfs_inode *inode, u64 start);
void btrfs_record_physical_zoned(struct inode *inode, u64 file_offset,
struct bio *bio);
void btrfs_rewrite_logical_zoned(struct btrfs_ordered_extent *ordered);
bool btrfs_check_meta_write_pointer(struct btrfs_fs_info *fs_info,
struct extent_buffer *eb,
struct btrfs_block_group **cache_ret);
void btrfs_revert_meta_write_pointer(struct btrfs_block_group *cache,
struct extent_buffer *eb);
int btrfs_zoned_issue_zeroout(struct btrfs_device *device, u64 physical, u64 length);
int btrfs_sync_zone_write_pointer(struct btrfs_device *tgt_dev, u64 logical,
u64 physical_start, u64 physical_pos);
struct btrfs_device *btrfs_zoned_get_device(struct btrfs_fs_info *fs_info,
u64 logical, u64 length);
bool btrfs_zone_activate(struct btrfs_block_group *block_group);
int btrfs_zone_finish(struct btrfs_block_group *block_group);
bool btrfs_can_activate_zone(struct btrfs_fs_devices *fs_devices,
int raid_index);
void btrfs_zone_finish_endio(struct btrfs_fs_info *fs_info, u64 logical,
u64 length);
2021-09-09 00:19:26 +08:00
void btrfs_clear_data_reloc_bg(struct btrfs_block_group *bg);
void btrfs_free_zone_cache(struct btrfs_fs_info *fs_info);
#else /* CONFIG_BLK_DEV_ZONED */
static inline int btrfs_get_dev_zone(struct btrfs_device *device, u64 pos,
struct blk_zone *zone)
{
return 0;
}
static inline int btrfs_get_dev_zone_info_all_devices(struct btrfs_fs_info *fs_info)
{
return 0;
}
static inline int btrfs_get_dev_zone_info(struct btrfs_device *device,
bool populate_cache)
{
return 0;
}
static inline void btrfs_destroy_dev_zone_info(struct btrfs_device *device) { }
static inline int btrfs_check_zoned_mode(const struct btrfs_fs_info *fs_info)
{
if (!btrfs_is_zoned(fs_info))
return 0;
btrfs_err(fs_info, "zoned block devices support is not enabled");
return -EOPNOTSUPP;
}
btrfs: disallow space_cache in ZONED mode As updates to the space cache v1 are in-place, the space cache cannot be located over sequential zones and there is no guarantees that the device will have enough conventional zones to store this cache. Resolve this problem by disabling completely the space cache v1. This does not introduce any problems with sequential block groups: all the free space is located after the allocation pointer and no free space before the pointer. There is no need to have such cache. Note: we can technically use free-space-tree (space cache v2) on ZONED mode. But, since ZONED mode now always allocates extents in a block group sequentially regardless of underlying device zone type, it's no use to enable and maintain the tree. For the same reason, NODATACOW is also disabled. In summary, ZONED will disable: | Disabled features | Reason | |-------------------+-----------------------------------------------------| | RAID/DUP | Cannot handle two zone append writes to different | | | zones | |-------------------+-----------------------------------------------------| | space_cache (v1) | In-place updating | | NODATACOW | In-place updating | |-------------------+-----------------------------------------------------| | fallocate | Reserved extent will be a write hole | |-------------------+-----------------------------------------------------| | MIXED_BG | Allocated metadata region will be write holes for | | | data writes | Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-10 19:26:10 +08:00
static inline int btrfs_check_mountopts_zoned(struct btrfs_fs_info *info)
{
return 0;
}
btrfs: implement log-structured superblock for ZONED mode Superblock (and its copies) is the only data structure in btrfs which has a fixed location on a device. Since we cannot overwrite in a sequential write required zone, we cannot place superblock in the zone. One easy solution is limiting superblock and copies to be placed only in conventional zones. However, this method has two downsides: one is reduced number of superblock copies. The location of the second copy of superblock is 256GB, which is in a sequential write required zone on typical devices in the market today. So, the number of superblock and copies is limited to be two. Second downside is that we cannot support devices which have no conventional zones at all. To solve these two problems, we employ superblock log writing. It uses two adjacent zones as a circular buffer to write updated superblocks. Once the first zone is filled up, start writing into the second one. Then, when both zones are filled up and before starting to write to the first zone again, it reset the first zone. We can determine the position of the latest superblock by reading write pointer information from a device. One corner case is when both zones are full. For this situation, we read out the last superblock of each zone, and compare them to determine which zone is older. The following zones are reserved as the circular buffer on ZONED btrfs. - The primary superblock: zones 0 and 1 - The first copy: zones 16 and 17 - The second copy: zones 1024 or zone at 256GB which is minimum, and next to it If these reserved zones are conventional, superblock is written fixed at the start of the zone without logging. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-10 19:26:14 +08:00
static inline int btrfs_sb_log_location_bdev(struct block_device *bdev,
int mirror, int rw, u64 *bytenr_ret)
{
*bytenr_ret = btrfs_sb_offset(mirror);
return 0;
}
static inline int btrfs_sb_log_location(struct btrfs_device *device, int mirror,
int rw, u64 *bytenr_ret)
{
*bytenr_ret = btrfs_sb_offset(mirror);
return 0;
}
static inline int btrfs_advance_sb_log(struct btrfs_device *device, int mirror)
{
return 0;
}
btrfs: implement log-structured superblock for ZONED mode Superblock (and its copies) is the only data structure in btrfs which has a fixed location on a device. Since we cannot overwrite in a sequential write required zone, we cannot place superblock in the zone. One easy solution is limiting superblock and copies to be placed only in conventional zones. However, this method has two downsides: one is reduced number of superblock copies. The location of the second copy of superblock is 256GB, which is in a sequential write required zone on typical devices in the market today. So, the number of superblock and copies is limited to be two. Second downside is that we cannot support devices which have no conventional zones at all. To solve these two problems, we employ superblock log writing. It uses two adjacent zones as a circular buffer to write updated superblocks. Once the first zone is filled up, start writing into the second one. Then, when both zones are filled up and before starting to write to the first zone again, it reset the first zone. We can determine the position of the latest superblock by reading write pointer information from a device. One corner case is when both zones are full. For this situation, we read out the last superblock of each zone, and compare them to determine which zone is older. The following zones are reserved as the circular buffer on ZONED btrfs. - The primary superblock: zones 0 and 1 - The first copy: zones 16 and 17 - The second copy: zones 1024 or zone at 256GB which is minimum, and next to it If these reserved zones are conventional, superblock is written fixed at the start of the zone without logging. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-10 19:26:14 +08:00
static inline int btrfs_reset_sb_log_zones(struct block_device *bdev, int mirror)
{
return 0;
}
2021-02-04 18:21:48 +08:00
static inline u64 btrfs_find_allocatable_zones(struct btrfs_device *device,
u64 hole_start, u64 hole_end,
u64 num_bytes)
{
return hole_start;
}
static inline int btrfs_reset_device_zone(struct btrfs_device *device,
u64 physical, u64 length, u64 *bytes)
{
*bytes = 0;
return 0;
}
static inline int btrfs_ensure_empty_zones(struct btrfs_device *device,
u64 start, u64 size)
{
return 0;
}
static inline int btrfs_load_block_group_zone_info(
struct btrfs_block_group *cache, bool new)
{
return 0;
}
static inline void btrfs_calc_zone_unusable(struct btrfs_block_group *cache) { }
static inline void btrfs_redirty_list_add(struct btrfs_transaction *trans,
struct extent_buffer *eb) { }
static inline void btrfs_free_redirty_list(struct btrfs_transaction *trans) { }
static inline bool btrfs_use_zone_append(struct btrfs_inode *inode, u64 start)
{
return false;
}
static inline void btrfs_record_physical_zoned(struct inode *inode,
u64 file_offset, struct bio *bio)
{
}
static inline void btrfs_rewrite_logical_zoned(
struct btrfs_ordered_extent *ordered) { }
static inline bool btrfs_check_meta_write_pointer(struct btrfs_fs_info *fs_info,
struct extent_buffer *eb,
struct btrfs_block_group **cache_ret)
{
return true;
}
static inline void btrfs_revert_meta_write_pointer(
struct btrfs_block_group *cache,
struct extent_buffer *eb)
{
}
static inline int btrfs_zoned_issue_zeroout(struct btrfs_device *device,
u64 physical, u64 length)
{
return -EOPNOTSUPP;
}
static inline int btrfs_sync_zone_write_pointer(struct btrfs_device *tgt_dev,
u64 logical, u64 physical_start,
u64 physical_pos)
{
return -EOPNOTSUPP;
}
static inline struct btrfs_device *btrfs_zoned_get_device(
struct btrfs_fs_info *fs_info,
u64 logical, u64 length)
{
return ERR_PTR(-EOPNOTSUPP);
}
static inline bool btrfs_zone_activate(struct btrfs_block_group *block_group)
{
return true;
}
static inline int btrfs_zone_finish(struct btrfs_block_group *block_group)
{
return 0;
}
static inline bool btrfs_can_activate_zone(struct btrfs_fs_devices *fs_devices,
int raid_index)
{
return true;
}
static inline void btrfs_zone_finish_endio(struct btrfs_fs_info *fs_info,
u64 logical, u64 length) { }
2021-09-09 00:19:26 +08:00
static inline void btrfs_clear_data_reloc_bg(struct btrfs_block_group *bg) { }
static inline void btrfs_free_zone_cache(struct btrfs_fs_info *fs_info) { }
#endif
static inline bool btrfs_dev_is_sequential(struct btrfs_device *device, u64 pos)
{
struct btrfs_zoned_device_info *zone_info = device->zone_info;
if (!zone_info)
return false;
return test_bit(pos >> zone_info->zone_size_shift, zone_info->seq_zones);
}
static inline bool btrfs_dev_is_empty_zone(struct btrfs_device *device, u64 pos)
{
struct btrfs_zoned_device_info *zone_info = device->zone_info;
if (!zone_info)
return true;
return test_bit(pos >> zone_info->zone_size_shift, zone_info->empty_zones);
}
static inline void btrfs_dev_set_empty_zone_bit(struct btrfs_device *device,
u64 pos, bool set)
{
struct btrfs_zoned_device_info *zone_info = device->zone_info;
unsigned int zno;
if (!zone_info)
return;
zno = pos >> zone_info->zone_size_shift;
if (set)
set_bit(zno, zone_info->empty_zones);
else
clear_bit(zno, zone_info->empty_zones);
}
static inline void btrfs_dev_set_zone_empty(struct btrfs_device *device, u64 pos)
{
btrfs_dev_set_empty_zone_bit(device, pos, true);
}
static inline void btrfs_dev_clear_zone_empty(struct btrfs_device *device, u64 pos)
{
btrfs_dev_set_empty_zone_bit(device, pos, false);
}
static inline bool btrfs_check_device_zone_type(const struct btrfs_fs_info *fs_info,
struct block_device *bdev)
{
if (btrfs_is_zoned(fs_info)) {
/*
* We can allow a regular device on a zoned filesystem, because
* we will emulate the zoned capabilities.
*/
if (!bdev_is_zoned(bdev))
return true;
return fs_info->zone_size ==
(bdev_zone_sectors(bdev) << SECTOR_SHIFT);
}
/* Do not allow Host Manged zoned device */
return bdev_zoned_model(bdev) != BLK_ZONED_HM;
}
btrfs: implement log-structured superblock for ZONED mode Superblock (and its copies) is the only data structure in btrfs which has a fixed location on a device. Since we cannot overwrite in a sequential write required zone, we cannot place superblock in the zone. One easy solution is limiting superblock and copies to be placed only in conventional zones. However, this method has two downsides: one is reduced number of superblock copies. The location of the second copy of superblock is 256GB, which is in a sequential write required zone on typical devices in the market today. So, the number of superblock and copies is limited to be two. Second downside is that we cannot support devices which have no conventional zones at all. To solve these two problems, we employ superblock log writing. It uses two adjacent zones as a circular buffer to write updated superblocks. Once the first zone is filled up, start writing into the second one. Then, when both zones are filled up and before starting to write to the first zone again, it reset the first zone. We can determine the position of the latest superblock by reading write pointer information from a device. One corner case is when both zones are full. For this situation, we read out the last superblock of each zone, and compare them to determine which zone is older. The following zones are reserved as the circular buffer on ZONED btrfs. - The primary superblock: zones 0 and 1 - The first copy: zones 16 and 17 - The second copy: zones 1024 or zone at 256GB which is minimum, and next to it If these reserved zones are conventional, superblock is written fixed at the start of the zone without logging. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-10 19:26:14 +08:00
static inline bool btrfs_check_super_location(struct btrfs_device *device, u64 pos)
{
/*
* On a non-zoned device, any address is OK. On a zoned device,
* non-SEQUENTIAL WRITE REQUIRED zones are capable.
*/
return device->zone_info == NULL || !btrfs_dev_is_sequential(device, pos);
}
static inline bool btrfs_can_zone_reset(struct btrfs_device *device,
u64 physical, u64 length)
{
u64 zone_size;
if (!btrfs_dev_is_sequential(device, physical))
return false;
zone_size = device->zone_info->zone_size;
if (!IS_ALIGNED(physical, zone_size) || !IS_ALIGNED(length, zone_size))
return false;
return true;
}
static inline void btrfs_zoned_meta_io_lock(struct btrfs_fs_info *fs_info)
{
if (!btrfs_is_zoned(fs_info))
return;
mutex_lock(&fs_info->zoned_meta_io_lock);
}
static inline void btrfs_zoned_meta_io_unlock(struct btrfs_fs_info *fs_info)
{
if (!btrfs_is_zoned(fs_info))
return;
mutex_unlock(&fs_info->zoned_meta_io_lock);
}
static inline void btrfs_clear_treelog_bg(struct btrfs_block_group *bg)
{
struct btrfs_fs_info *fs_info = bg->fs_info;
if (!btrfs_is_zoned(fs_info))
return;
spin_lock(&fs_info->treelog_bg_lock);
if (fs_info->treelog_bg == bg->start)
fs_info->treelog_bg = 0;
spin_unlock(&fs_info->treelog_bg_lock);
}
#endif