linux/drivers/of/Makefile

obj-y = base.o device.o platform.o
obj-$(CONFIG_OF_FLATTREE) += fdt.o
obj-$(CONFIG_OF_PROMTREE) += pdt.o
obj-$(CONFIG_OF_ADDRESS)  += address.o
obj-$(CONFIG_OF_IRQ)    += irq.o
obj-$(CONFIG_OF_NET)	+= of_net.o
obj-$(CONFIG_OF_SELFTEST) += selftest.o
obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
obj-$(CONFIG_OF_PCI)	+= of_pci.o
obj-$(CONFIG_OF_PCI_IRQ)  += of_pci_irq.o
obj-$(CONFIG_OF_MTD)	+= of_mtd.o
obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o
of: remove CONFIG_OF_DEVICE CONFIG_OF_DEVICE is always selected when CONFIG_OF is enabled, so remove it and simplify of_platform.h and of_device.h headers. This also fixes !OF compiles using of_platform_populate. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@linaro.org> 2013-04-20 06:32:52 +08:00			`obj-y = base.o device.o platform.o`
of/flattree: merge find_flat_dt_string and initial_boot_params Merge common code between Microblaze and PowerPC. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu> 2009-11-24 05:53:09 +08:00			`obj-$(CONFIG_OF_FLATTREE) += fdt.o`
of/promtree: make drivers/of/pdt.c no longer sparc-only Clean up pdt.c: - make build dependent upon config OF_PROMTREE - #ifdef out the sparc-specific stuff - create pdt-specific header Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2010-10-11 11:42:33 +08:00			`obj-$(CONFIG_OF_PROMTREE) += pdt.o`
of/address: merge of_iomap() Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au> 2010-06-08 21:48:09 +08:00			`obj-$(CONFIG_OF_ADDRESS) += address.o`
of/irq: Move irq_of_parse_and_map() to common code Merge common code between PowerPC and Microblaze. SPARC implements irq_of_parse_and_map(), but the implementation is different, so it does not use this code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Simek <monstr@monstr.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> 2010-06-19 01:09:59 +08:00			`obj-$(CONFIG_OF_IRQ) += irq.o`
of/net: Move of_get_mac_address() to a common source file. There are two identical implementations of of_get_mac_address(), one each in arch/powerpc/kernel/prom_parse.c and arch/microblaze/kernel/prom_parse.c. Move this function to a new common file of_net.{c,h} and adjust all the callers to include the new header. Signed-off-by: David Daney <ddaney@caviumnetworks.com> [grant.likely@secretlab.ca: protect header with #ifdef] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2010-10-27 06:07:13 +08:00			`obj-$(CONFIG_OF_NET) += of_net.o`
of: Add device tree selftests Add some runtime test cases for the library of device tree parsing functions. v2: - Add testcase for phandle with 0 args - Don't run testcases if testcase data isn't present in device tree Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2011-12-13 00:25:57 +08:00			`obj-$(CONFIG_OF_SELFTEST) += selftest.o`
openfirmware: Add OF phylib support code Add support for parsing the device tree for PHY devices on an MDIO bus. Currently many of the PowerPC ethernet drivers are open coding a solution for reading data out of the device tree to find the correct PHY device. This patch implements a set of common routines to: a) let MDIO bus drivers register phy_devices described in the tree, and b) let MAC drivers find the correct phy_device via the tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2009-04-25 20:52:56 +08:00			`obj-$(CONFIG_OF_MDIO) += of_mdio.o`
of/pci: move of_irq_map_pci() into generic code There is a tiny difference between PPC32 and PPC64. Microblaze uses the PPC32 variant. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> [grant.likely@secretlab.ca: Added comment to #endif, moved documentation block to function implementation, fixed for non ppc and microblaze compiles] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> 2011-01-24 12:28:55 +08:00			`obj-$(CONFIG_OF_PCI) += of_pci.o`
pci/of: Match PCI devices to OF nodes dynamically powerpc has two different ways of matching PCI devices to their corresponding OF node (if any) for historical reasons. The ppc64 one does a scan looking for matching bus/dev/fn, while the ppc32 one does a scan looking only for matching dev/fn on each level in order to be agnostic to busses being renumbered (which Linux does on some platforms). This removes both and instead moves the matching code to the PCI core itself. It's the most logical place to do it: when a pci_dev is created, we know the parent and thus can do a single level scan for the matching device_node (if any). The benefit is that all archs now get the matching for free. There's one hook the arch might want to provide to match a PHB bus to its device node. A default weak implementation is provided that looks for the parent device device node, but it's not entirely reliable on powerpc for various reasons so powerpc provides its own. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> 2011-04-11 09:37:07 +08:00			`obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o`
of/mtd/nand: add generic bindings and helpers - nand-ecc-mode : String, operation mode of the NAND ecc mode. Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", "soft_bch". - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stefan Roese <sr@denx.de> 2012-01-28 12:12:36 +08:00			`obj-$(CONFIG_OF_MTD) += of_mtd.o`
drivers: of: add initialization code for dynamic reserved memory This patch adds support for dynamically allocated reserved memory regions declared in device tree. Such regions are defined by 'size', 'alignment' and 'alloc-ranges' properties. Based on previous code provided by Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Grant Likely <grant.likely@linaro.org> 2014-02-28 21:42:48 +08:00			`obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o`