korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-04 01:24:12 +08:00
Code Issues Packages Projects Releases Wiki Activity
f3010343d9
linux/arch/powerpc/perf/power6-pmu.c

550 lines
15 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 14:55:01 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
/*
* Performance counter support for POWER6 processors.
*
* Copyright 2008-2009 Paul Mackerras, IBM Corporation.
*/
#include <linux/kernel.h>
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 18:02:48 +08:00
#include <linux/perf_event.h>
perf_counter: powerpc: Change how processor-specific back-ends get selected At present, the powerpc generic (processor-independent) perf_counter code has list of processor back-end modules, and at initialization, it looks at the PVR (processor version register) and has a switch statement to select a suitable processor-specific back-end. This is going to become inconvenient as we add more processor-specific back-ends, so this inverts the order: now each back-end checks whether it applies to the current processor, and registers itself if so. Furthermore, instead of looking at the PVR, back-ends now check the cur_cpu_spec->oprofile_cpu_type string and match on that. Lastly, each back-end now specifies a name for itself so the core can print a nice message when a back-end registers itself. This doesn't provide any support for unregistering back-ends, but that wouldn't be hard to do and would allow back-ends to be modules. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55529.762227.518531@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:52:09 +08:00
#include <linux/string.h>
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
#include <asm/reg.h>
perf_counter: powerpc: Change how processor-specific back-ends get selected At present, the powerpc generic (processor-independent) perf_counter code has list of processor back-end modules, and at initialization, it looks at the PVR (processor version register) and has a switch statement to select a suitable processor-specific back-end. This is going to become inconvenient as we add more processor-specific back-ends, so this inverts the order: now each back-end checks whether it applies to the current processor, and registers itself if so. Furthermore, instead of looking at the PVR, back-ends now check the cur_cpu_spec->oprofile_cpu_type string and match on that. Lastly, each back-end now specifies a name for itself so the core can print a nice message when a back-end registers itself. This doesn't provide any support for unregistering back-ends, but that wouldn't be hard to do and would allow back-ends to be modules. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55529.762227.518531@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:52:09 +08:00
#include <asm/cputable.h>
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
powerpc/perf: Add declarations to fix sparse warnings Sparse warns about all the init functions: symbol init_ppc970_pmu was not declared. Should it be static? symbol init_power5p_pmu was not declared. Should it be static? symbol init_power5_pmu was not declared. Should it be static? symbol init_power6_pmu was not declared. Should it be static? symbol init_power7_pmu was not declared. Should it be static? symbol init_power9_pmu was not declared. Should it be static? symbol init_power8_pmu was not declared. Should it be static? symbol init_generic_compat_pmu was not declared. Should it be static? They're already declared in internal.h, so just make sure all the C files include that directly or indirectly. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://lore.kernel.org/r/20200916115637.3100484-2-mpe@ellerman.id.au
2020-09-16 19:56:37 +08:00
#include "internal.h"
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
/*
* Bits in event code for POWER6
*/
#define PM_PMC_SH 20 /* PMC number (1-based) for direct events */
#define PM_PMC_MSK 0x7
#define PM_PMC_MSKS (PM_PMC_MSK << PM_PMC_SH)
#define PM_UNIT_SH 16 /* Unit event comes (TTMxSEL encoding) */
#define PM_UNIT_MSK 0xf
#define PM_UNIT_MSKS (PM_UNIT_MSK << PM_UNIT_SH)
#define PM_LLAV 0x8000 /* Load lookahead match value */
#define PM_LLA 0x4000 /* Load lookahead match enable */
#define PM_BYTE_SH 12 /* Byte of event bus to use */
#define PM_BYTE_MSK 3
#define PM_SUBUNIT_SH 8 /* Subunit event comes from (NEST_SEL enc.) */
#define PM_SUBUNIT_MSK 7
#define PM_SUBUNIT_MSKS (PM_SUBUNIT_MSK << PM_SUBUNIT_SH)
#define PM_PMCSEL_MSK 0xff /* PMCxSEL value */
#define PM_BUSEVENT_MSK 0xf3700
/*
* Bits in MMCR1 for POWER6
*/
#define MMCR1_TTM0SEL_SH 60
#define MMCR1_TTMSEL_SH(n) (MMCR1_TTM0SEL_SH - (n) * 4)
#define MMCR1_TTMSEL_MSK 0xf
#define MMCR1_TTMSEL(m, n) (((m) >> MMCR1_TTMSEL_SH(n)) & MMCR1_TTMSEL_MSK)
#define MMCR1_NESTSEL_SH 45
#define MMCR1_NESTSEL_MSK 0x7
#define MMCR1_NESTSEL(m) (((m) >> MMCR1_NESTSEL_SH) & MMCR1_NESTSEL_MSK)
perf_counter: powerpc: Use unsigned long for register and constraint values This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:51:13 +08:00
#define MMCR1_PMC1_LLA (1ul << 44)
#define MMCR1_PMC1_LLA_VALUE (1ul << 39)
#define MMCR1_PMC1_ADDR_SEL (1ul << 35)
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
#define MMCR1_PMC1SEL_SH 24
#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8)
#define MMCR1_PMCSEL_MSK 0xff
perf_counter: powerpc: set sample enable bit for marked instruction events Impact: enable access to hardware feature POWER processors have the ability to "mark" a subset of the instructions and provide more detailed information on what happens to the marked instructions as they flow through the pipeline. This marking is enabled by the "sample enable" bit in MMCRA, and there are synchronization requirements around setting and clearing the bit. This adds logic to the processor-specific back-ends so that they know which events relate to marked instructions and set the sampling enable bit if any event that we want to put on the PMU is a marked instruction event. It also adds logic to the generic powerpc code to do the necessary synchronization if that bit is set. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18908.31930.1024.228867@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08 18:30:18 +08:00
/*
* Map of which direct events on which PMCs are marked instruction events.
* Indexed by PMCSEL value >> 1.
* Bottom 4 bits are a map of which PMCs are interesting,
* top 4 bits say what sort of event:
* 0 = direct marked event,
* 1 = byte decode event,
* 4 = add/and event (PMC1 -> bits 0 & 4),
* 5 = add/and event (PMC1 -> bits 1 & 5),
* 6 = add/and event (PMC1 -> bits 2 & 6),
* 7 = add/and event (PMC1 -> bits 3 & 7).
*/
static unsigned char direct_event_is_marked[0x60 >> 1] = {
0, /* 00 */
0, /* 02 */
0, /* 04 */
0x07, /* 06 PM_MRK_ST_CMPL, PM_MRK_ST_GPS, PM_MRK_ST_CMPL_INT */
0x04, /* 08 PM_MRK_DFU_FIN */
0x06, /* 0a PM_MRK_IFU_FIN, PM_MRK_INST_FIN */
0, /* 0c */
0, /* 0e */
0x02, /* 10 PM_MRK_INST_DISP */
0x08, /* 12 PM_MRK_LSU_DERAT_MISS */
0, /* 14 */
0, /* 16 */
0x0c, /* 18 PM_THRESH_TIMEO, PM_MRK_INST_FIN */
0x0f, /* 1a PM_MRK_INST_DISP, PM_MRK_{FXU,FPU,LSU}_FIN */
0x01, /* 1c PM_MRK_INST_ISSUED */
0, /* 1e */
0, /* 20 */
0, /* 22 */
0, /* 24 */
0, /* 26 */
0x15, /* 28 PM_MRK_DATA_FROM_L2MISS, PM_MRK_DATA_FROM_L3MISS */
0, /* 2a */
0, /* 2c */
0, /* 2e */
0x4f, /* 30 */
0x7f, /* 32 */
0x4f, /* 34 */
0x5f, /* 36 */
0x6f, /* 38 */
0x4f, /* 3a */
0, /* 3c */
0x08, /* 3e PM_MRK_INST_TIMEO */
0x1f, /* 40 */
0x1f, /* 42 */
0x1f, /* 44 */
0x1f, /* 46 */
0x1f, /* 48 */
0x1f, /* 4a */
0x1f, /* 4c */
0x1f, /* 4e */
0, /* 50 */
0x05, /* 52 PM_MRK_BR_TAKEN, PM_MRK_BR_MPRED */
0x1c, /* 54 PM_MRK_PTEG_FROM_L3MISS, PM_MRK_PTEG_FROM_L2MISS */
0x02, /* 56 PM_MRK_LD_MISS_L1 */
0, /* 58 */
0, /* 5a */
0, /* 5c */
0, /* 5e */
};
/*
* Masks showing for each unit which bits are marked events.
* These masks are in LE order, i.e. 0x00000001 is byte 0, bit 0.
*/
static u32 marked_bus_events[16] = {
0x01000000, /* direct events set 1: byte 3 bit 0 */
0x00010000, /* direct events set 2: byte 2 bit 0 */
0, 0, 0, 0, /* IDU, IFU, nest: nothing */
0x00000088, /* VMX set 1: byte 0 bits 3, 7 */
0x000000c0, /* VMX set 2: byte 0 bits 4-7 */
0x04010000, /* LSU set 1: byte 2 bit 0, byte 3 bit 2 */
0xff010000u, /* LSU set 2: byte 2 bit 0, all of byte 3 */
0, /* LSU set 3 */
0x00000010, /* VMX set 3: byte 0 bit 4 */
0, /* BFP set 1 */
0x00000022, /* BFP set 2: byte 0 bits 1, 5 */
0, 0
};
powerpc/perf: Move perf core & PMU code into a subdirectory The perf code has grown a lot since it started, and is big enough to warrant its own subdirectory. For reference it's ~60% bigger than the oprofile code. It declutters the kernel directory, makes it simpler to grep for "just perf stuff", and allows us to shorten some filenames. While we're at it, make it more obvious that we have two implementations of the core perf logic. One for (roughly) Book3S CPUs, which was the original implementation, and the other for Freescale embedded CPUs. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-21 01:02:09 +08:00
perf_counter: powerpc: set sample enable bit for marked instruction events Impact: enable access to hardware feature POWER processors have the ability to "mark" a subset of the instructions and provide more detailed information on what happens to the marked instructions as they flow through the pipeline. This marking is enabled by the "sample enable" bit in MMCRA, and there are synchronization requirements around setting and clearing the bit. This adds logic to the processor-specific back-ends so that they know which events relate to marked instructions and set the sampling enable bit if any event that we want to put on the PMU is a marked instruction event. It also adds logic to the generic powerpc code to do the necessary synchronization if that bit is set. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18908.31930.1024.228867@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08 18:30:18 +08:00
/*
* Returns 1 if event counts things relating to marked instructions
* and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not.
*/
perf_counter: powerpc: use u64 for event codes internally Although the perf_counter API allows 63-bit raw event codes, internally in the powerpc back-end we had been using 32-bit event codes. This expands them to 64 bits so that we can add bits for specifying threshold start/stop events and instruction sampling modes later. This also corrects the return value of can_go_on_limited_pmc; we were returning an event code rather than just a 0/1 value in some circumstances. That didn't particularly matter while event codes were 32-bit, but now that event codes are 64-bit it might, so this fixes it. [ Impact: extend PowerPC perfcounter interfaces from u32 to u64 ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18955.36874.472452.353104@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-14 11:29:14 +08:00
static int power6_marked_instr_event(u64 event)
perf_counter: powerpc: set sample enable bit for marked instruction events Impact: enable access to hardware feature POWER processors have the ability to "mark" a subset of the instructions and provide more detailed information on what happens to the marked instructions as they flow through the pipeline. This marking is enabled by the "sample enable" bit in MMCRA, and there are synchronization requirements around setting and clearing the bit. This adds logic to the processor-specific back-ends so that they know which events relate to marked instructions and set the sampling enable bit if any event that we want to put on the PMU is a marked instruction event. It also adds logic to the generic powerpc code to do the necessary synchronization if that bit is set. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18908.31930.1024.228867@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08 18:30:18 +08:00
{
int pmc, psel, ptype;
int bit, byte, unit;
u32 mask;
pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
psel = (event & PM_PMCSEL_MSK) >> 1; /* drop edge/level bit */
if (pmc >= 5)
return 0;
bit = -1;
if (psel < sizeof(direct_event_is_marked)) {
ptype = direct_event_is_marked[psel];
if (pmc == 0 || !(ptype & (1 << (pmc - 1))))
return 0;
ptype >>= 4;
if (ptype == 0)
return 1;
if (ptype == 1)
bit = 0;
else
bit = ptype ^ (pmc - 1);
} else if ((psel & 0x48) == 0x40)
bit = psel & 7;
if (!(event & PM_BUSEVENT_MSK) || bit == -1)
return 0;
byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
mask = marked_bus_events[unit];
return (mask >> (byte * 8 + bit)) & 1;
}
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
/*
* Assign PMC numbers and compute MMCR1 value for a set of events
*/
perf_counter: powerpc: use u64 for event codes internally Although the perf_counter API allows 63-bit raw event codes, internally in the powerpc back-end we had been using 32-bit event codes. This expands them to 64 bits so that we can add bits for specifying threshold start/stop events and instruction sampling modes later. This also corrects the return value of can_go_on_limited_pmc; we were returning an event code rather than just a 0/1 value in some circumstances. That didn't particularly matter while event codes were 32-bit, but now that event codes are 64-bit it might, so this fixes it. [ Impact: extend PowerPC perfcounter interfaces from u32 to u64 ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18955.36874.472452.353104@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-14 11:29:14 +08:00
static int p6_compute_mmcr(u64 event[], int n_ev,
powerpc/perf: Adds support for programming of Thresholding in P10 Thresholding, a performance monitoring unit feature, can be used to identify marked instructions which take more than expected cycles between start event and end event. Threshold compare (thresh_cmp) bits are programmed in MMCRA register. In Power9, thresh_cmp bits were part of the event code. But in case of P10, thresh_cmp are not part of event code due to inclusion of MMCR3 bits. Patch here adds an option to use attr.config1 variable to be used to pass thresh_cmp value to be programmed in MMCRA register. A new ppmu flag called PPMU_HAS_ATTR_CONFIG1 has been added and this flag is used to notify the use of attr.config1 variable. Patch has extended the parameter list of 'compute_mmcr', to include power_pmu's 'flags' element and parameter list of get_constraint to include attr.config1 value. It also extend parameter list of power_check_constraints inorder to pass perf_event list. As stated by commit ef0e3b650f8d ("powerpc/perf: Fix Threshold Event Counter Multiplier width for P10"), constraint bits for thresh_cmp is also needed to be increased to 11 bits, which is handled as part of this patch. We added bit number 53 as part of constraint bits of thresh_cmp for power10 to make it an 11 bit field. Updated layout for p10: /* * Layout of constraint bits: * * 60 56 52 48 44 40 36 32 * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | * [ fab_match ] [ thresh_cmp ] [ thresh_ctl ] [ ] * | | * [ thresh_cmp bits for p10] thresh_sel -* * * 28 24 20 16 12 8 4 0 * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | * [ ] | [ ] | [ sample ] [ ] [6] [5] [4] [3] [2] [1] * | | | | | * BHRB IFM -* | | |*radix_scope | Count of events for each PMC. * EBB -* | | p1, p2, p3, p4, p5, p6. * L1 I/D qualifier -* | * nc - number of counters -* * * The PMC fields P1..P6, and NC, are adder fields. As we accumulate constraints * we want the low bit of each field to be added to any existing value. * * Everything else is a value field. */ Result: command#: cat /sys/devices/cpu/format/thresh_cmp config1:0-17 ex. usage: command#: perf record -I --weight -d -e cpu/event=0x67340101EC,thresh_cmp=500/ ./ebizzy -S 2 -t 1 -s 4096 1826636 records/s real 2.00 s user 2.00 s sys 0.00 s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.038 MB perf.data (61 samples) ] Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210209095234.837356-1-kjain@linux.ibm.com
2021-02-09 17:52:34 +08:00
unsigned int hwc[], struct mmcr_regs *mmcr, struct perf_event *pevents[],
u32 flags __maybe_unused)
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
{
perf_counter: powerpc: Use unsigned long for register and constraint values This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:51:13 +08:00
unsigned long mmcr1 = 0;
powerpc: perf_event: Enable SDAR in continous sample mode In continuous sampling mode we want the SDAR to update. While we can select between dcache misses and ERAT (L1-TLB) misses, a decent default is to enable both. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28 02:31:29 +08:00
unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
int i;
unsigned int pmc, ev, b, u, s, psel;
unsigned int ttmset = 0;
unsigned int pmc_inuse = 0;
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
if (n_ev > 6)
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
return -1;
for (i = 0; i < n_ev; ++i) {
pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
if (pmc) {
if (pmc_inuse & (1 << (pmc - 1)))
return -1; /* collision! */
pmc_inuse |= 1 << (pmc - 1);
}
}
for (i = 0; i < n_ev; ++i) {
ev = event[i];
pmc = (ev >> PM_PMC_SH) & PM_PMC_MSK;
if (pmc) {
--pmc;
} else {
/* can go on any PMC; find a free one */
for (pmc = 0; pmc < 4; ++pmc)
if (!(pmc_inuse & (1 << pmc)))
break;
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
if (pmc >= 4)
return -1;
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
pmc_inuse |= 1 << pmc;
}
hwc[i] = pmc;
psel = ev & PM_PMCSEL_MSK;
if (ev & PM_BUSEVENT_MSK) {
/* this event uses the event bus */
b = (ev >> PM_BYTE_SH) & PM_BYTE_MSK;
u = (ev >> PM_UNIT_SH) & PM_UNIT_MSK;
/* check for conflict on this byte of event bus */
if ((ttmset & (1 << b)) && MMCR1_TTMSEL(mmcr1, b) != u)
return -1;
perf_counter: powerpc: Use unsigned long for register and constraint values This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:51:13 +08:00
mmcr1 |= (unsigned long)u << MMCR1_TTMSEL_SH(b);
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
ttmset |= 1 << b;
if (u == 5) {
/* Nest events have a further mux */
s = (ev >> PM_SUBUNIT_SH) & PM_SUBUNIT_MSK;
if ((ttmset & 0x10) &&
MMCR1_NESTSEL(mmcr1) != s)
return -1;
ttmset |= 0x10;
perf_counter: powerpc: Use unsigned long for register and constraint values This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:51:13 +08:00
mmcr1 |= (unsigned long)s << MMCR1_NESTSEL_SH;
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
}
if (0x30 <= psel && psel <= 0x3d) {
/* these need the PMCx_ADDR_SEL bits */
if (b >= 2)
mmcr1 |= MMCR1_PMC1_ADDR_SEL >> pmc;
}
/* bus select values are different for PMC3/4 */
if (pmc >= 2 && (psel & 0x90) == 0x80)
psel ^= 0x20;
}
if (ev & PM_LLA) {
mmcr1 |= MMCR1_PMC1_LLA >> pmc;
if (ev & PM_LLAV)
mmcr1 |= MMCR1_PMC1_LLA_VALUE >> pmc;
}
perf_counter: powerpc: set sample enable bit for marked instruction events Impact: enable access to hardware feature POWER processors have the ability to "mark" a subset of the instructions and provide more detailed information on what happens to the marked instructions as they flow through the pipeline. This marking is enabled by the "sample enable" bit in MMCRA, and there are synchronization requirements around setting and clearing the bit. This adds logic to the processor-specific back-ends so that they know which events relate to marked instructions and set the sampling enable bit if any event that we want to put on the PMU is a marked instruction event. It also adds logic to the generic powerpc code to do the necessary synchronization if that bit is set. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18908.31930.1024.228867@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08 18:30:18 +08:00
if (power6_marked_instr_event(event[i]))
mmcra |= MMCRA_SAMPLE_ENABLE;
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
if (pmc < 4)
perf_counter: powerpc: Use unsigned long for register and constraint values This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:51:13 +08:00
mmcr1 |= (unsigned long)psel << MMCR1_PMCSEL_SH(pmc);
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
}
powerpc/perf: Update cpu_hw_event to use `struct` for storing MMCR registers core-book3s currently uses array to store the MMCR registers as part of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct` to store mmcr regs instead of array. This will make code easier to read and reduces chance of any subtle bug that may come in the future, say when new registers are added. Patch updates all relevant code that was using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`. This includes the PMU driver code for supported platforms (power5 to power9) and ISA macros for counter support functions. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-2-git-send-email-atrajeev@linux.vnet.ibm.com
2020-07-17 22:38:13 +08:00
mmcr->mmcr0 = 0;
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
if (pmc_inuse & 1)
powerpc/perf: Update cpu_hw_event to use `struct` for storing MMCR registers core-book3s currently uses array to store the MMCR registers as part of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct` to store mmcr regs instead of array. This will make code easier to read and reduces chance of any subtle bug that may come in the future, say when new registers are added. Patch updates all relevant code that was using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`. This includes the PMU driver code for supported platforms (power5 to power9) and ISA macros for counter support functions. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-2-git-send-email-atrajeev@linux.vnet.ibm.com
2020-07-17 22:38:13 +08:00
mmcr->mmcr0 = MMCR0_PMC1CE;
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
if (pmc_inuse & 0xe)
powerpc/perf: Update cpu_hw_event to use `struct` for storing MMCR registers core-book3s currently uses array to store the MMCR registers as part of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct` to store mmcr regs instead of array. This will make code easier to read and reduces chance of any subtle bug that may come in the future, say when new registers are added. Patch updates all relevant code that was using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`. This includes the PMU driver code for supported platforms (power5 to power9) and ISA macros for counter support functions. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-2-git-send-email-atrajeev@linux.vnet.ibm.com
2020-07-17 22:38:13 +08:00
mmcr->mmcr0 |= MMCR0_PMCjCE;
mmcr->mmcr1 = mmcr1;
mmcr->mmcra = mmcra;
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
return 0;
}
/*
* Layout of constraint bits:
*
* 0-1 add field: number of uses of PMC1 (max 1)
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
* 2-3, 4-5, 6-7, 8-9, 10-11: ditto for PMC2, 3, 4, 5, 6
* 12-15 add field: number of uses of PMC1-4 (max 4)
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
* 16-19 select field: unit on byte 0 of event bus
* 20-23, 24-27, 28-31 ditto for bytes 1, 2, 3
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
* 32-34 select field: nest (subunit) event selector
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
*/
perf_counter: powerpc: Use unsigned long for register and constraint values This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:51:13 +08:00
static int p6_get_constraint(u64 event, unsigned long *maskp,
powerpc/perf: Adds support for programming of Thresholding in P10 Thresholding, a performance monitoring unit feature, can be used to identify marked instructions which take more than expected cycles between start event and end event. Threshold compare (thresh_cmp) bits are programmed in MMCRA register. In Power9, thresh_cmp bits were part of the event code. But in case of P10, thresh_cmp are not part of event code due to inclusion of MMCR3 bits. Patch here adds an option to use attr.config1 variable to be used to pass thresh_cmp value to be programmed in MMCRA register. A new ppmu flag called PPMU_HAS_ATTR_CONFIG1 has been added and this flag is used to notify the use of attr.config1 variable. Patch has extended the parameter list of 'compute_mmcr', to include power_pmu's 'flags' element and parameter list of get_constraint to include attr.config1 value. It also extend parameter list of power_check_constraints inorder to pass perf_event list. As stated by commit ef0e3b650f8d ("powerpc/perf: Fix Threshold Event Counter Multiplier width for P10"), constraint bits for thresh_cmp is also needed to be increased to 11 bits, which is handled as part of this patch. We added bit number 53 as part of constraint bits of thresh_cmp for power10 to make it an 11 bit field. Updated layout for p10: /* * Layout of constraint bits: * * 60 56 52 48 44 40 36 32 * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | * [ fab_match ] [ thresh_cmp ] [ thresh_ctl ] [ ] * | | * [ thresh_cmp bits for p10] thresh_sel -* * * 28 24 20 16 12 8 4 0 * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | * [ ] | [ ] | [ sample ] [ ] [6] [5] [4] [3] [2] [1] * | | | | | * BHRB IFM -* | | |*radix_scope | Count of events for each PMC. * EBB -* | | p1, p2, p3, p4, p5, p6. * L1 I/D qualifier -* | * nc - number of counters -* * * The PMC fields P1..P6, and NC, are adder fields. As we accumulate constraints * we want the low bit of each field to be added to any existing value. * * Everything else is a value field. */ Result: command#: cat /sys/devices/cpu/format/thresh_cmp config1:0-17 ex. usage: command#: perf record -I --weight -d -e cpu/event=0x67340101EC,thresh_cmp=500/ ./ebizzy -S 2 -t 1 -s 4096 1826636 records/s real 2.00 s user 2.00 s sys 0.00 s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.038 MB perf.data (61 samples) ] Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210209095234.837356-1-kjain@linux.ibm.com
2021-02-09 17:52:34 +08:00
unsigned long *valp, u64 event_config1 __maybe_unused)
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
{
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
int pmc, byte, sh, subunit;
perf_counter: powerpc: Use unsigned long for register and constraint values This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:51:13 +08:00
unsigned long mask = 0, value = 0;
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
if (pmc) {
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
if (pmc > 4 && !(event == 0x500009 || event == 0x600005))
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
return -1;
sh = (pmc - 1) * 2;
mask |= 2 << sh;
value |= 1 << sh;
}
if (event & PM_BUSEVENT_MSK) {
byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
sh = byte * 4 + (16 - PM_UNIT_SH);
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
mask |= PM_UNIT_MSKS << sh;
perf_counter: powerpc: Use unsigned long for register and constraint values This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:51:13 +08:00
value |= (unsigned long)(event & PM_UNIT_MSKS) << sh;
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
if ((event & PM_UNIT_MSKS) == (5 << PM_UNIT_SH)) {
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
subunit = (event >> PM_SUBUNIT_SH) & PM_SUBUNIT_MSK;
perf_counter: powerpc: Use unsigned long for register and constraint values This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:51:13 +08:00
mask |= (unsigned long)PM_SUBUNIT_MSK << 32;
value |= (unsigned long)subunit << 32;
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
}
}
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
if (pmc <= 4) {
mask |= 0x8000; /* add field for count of PMC1-4 uses */
value |= 0x1000;
}
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
*maskp = mask;
*valp = value;
return 0;
}
perf_counter: powerpc: use u64 for event codes internally Although the perf_counter API allows 63-bit raw event codes, internally in the powerpc back-end we had been using 32-bit event codes. This expands them to 64 bits so that we can add bits for specifying threshold start/stop events and instruction sampling modes later. This also corrects the return value of can_go_on_limited_pmc; we were returning an event code rather than just a 0/1 value in some circumstances. That didn't particularly matter while event codes were 32-bit, but now that event codes are 64-bit it might, so this fixes it. [ Impact: extend PowerPC perfcounter interfaces from u32 to u64 ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18955.36874.472452.353104@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-14 11:29:14 +08:00
static int p6_limited_pmc_event(u64 event)
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
{
int pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
return pmc == 5 || pmc == 6;
}
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
#define MAX_ALT 4 /* at most 4 alternatives for any event */
static const unsigned int event_alternatives[][MAX_ALT] = {
{ 0x0130e8, 0x2000f6, 0x3000fc }, /* PM_PTEG_RELOAD_VALID */
{ 0x080080, 0x10000d, 0x30000c, 0x4000f0 }, /* PM_LD_MISS_L1 */
{ 0x080088, 0x200054, 0x3000f0 }, /* PM_ST_MISS_L1 */
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
{ 0x10000a, 0x2000f4, 0x600005 }, /* PM_RUN_CYC */
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
{ 0x10000b, 0x2000f5 }, /* PM_RUN_COUNT */
{ 0x10000e, 0x400010 }, /* PM_PURR */
{ 0x100010, 0x4000f8 }, /* PM_FLUSH */
{ 0x10001a, 0x200010 }, /* PM_MRK_INST_DISP */
{ 0x100026, 0x3000f8 }, /* PM_TB_BIT_TRANS */
{ 0x100054, 0x2000f0 }, /* PM_ST_FIN */
{ 0x100056, 0x2000fc }, /* PM_L1_ICACHE_MISS */
{ 0x1000f0, 0x40000a }, /* PM_INST_IMC_MATCH_CMPL */
{ 0x1000f8, 0x200008 }, /* PM_GCT_EMPTY_CYC */
{ 0x1000fc, 0x400006 }, /* PM_LSU_DERAT_MISS_CYC */
{ 0x20000e, 0x400007 }, /* PM_LSU_DERAT_MISS */
{ 0x200012, 0x300012 }, /* PM_INST_DISP */
{ 0x2000f2, 0x3000f2 }, /* PM_INST_DISP */
{ 0x2000f8, 0x300010 }, /* PM_EXT_INT */
{ 0x2000fe, 0x300056 }, /* PM_DATA_FROM_L2MISS */
{ 0x2d0030, 0x30001a }, /* PM_MRK_FPU_FIN */
{ 0x30000a, 0x400018 }, /* PM_MRK_INST_FIN */
{ 0x3000f6, 0x40000e }, /* PM_L1_DCACHE_RELOAD_VALID */
{ 0x3000fe, 0x400056 }, /* PM_DATA_FROM_L3MISS */
};
/*
* This could be made more efficient with a binary search on
* a presorted list, if necessary
*/
perf_counter: powerpc: use u64 for event codes internally Although the perf_counter API allows 63-bit raw event codes, internally in the powerpc back-end we had been using 32-bit event codes. This expands them to 64 bits so that we can add bits for specifying threshold start/stop events and instruction sampling modes later. This also corrects the return value of can_go_on_limited_pmc; we were returning an event code rather than just a 0/1 value in some circumstances. That didn't particularly matter while event codes were 32-bit, but now that event codes are 64-bit it might, so this fixes it. [ Impact: extend PowerPC perfcounter interfaces from u32 to u64 ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18955.36874.472452.353104@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-14 11:29:14 +08:00
static int find_alternatives_list(u64 event)
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
{
int i, j;
unsigned int alt;
for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) {
if (event < event_alternatives[i][0])
return -1;
for (j = 0; j < MAX_ALT; ++j) {
alt = event_alternatives[i][j];
if (!alt || event < alt)
break;
if (event == alt)
return i;
}
}
return -1;
}
perf_counter: powerpc: use u64 for event codes internally Although the perf_counter API allows 63-bit raw event codes, internally in the powerpc back-end we had been using 32-bit event codes. This expands them to 64 bits so that we can add bits for specifying threshold start/stop events and instruction sampling modes later. This also corrects the return value of can_go_on_limited_pmc; we were returning an event code rather than just a 0/1 value in some circumstances. That didn't particularly matter while event codes were 32-bit, but now that event codes are 64-bit it might, so this fixes it. [ Impact: extend PowerPC perfcounter interfaces from u32 to u64 ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18955.36874.472452.353104@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-14 11:29:14 +08:00
static int p6_get_alternatives(u64 event, unsigned int flags, u64 alt[])
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
{
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
int i, j, nlim;
perf_counter: powerpc: use u64 for event codes internally Although the perf_counter API allows 63-bit raw event codes, internally in the powerpc back-end we had been using 32-bit event codes. This expands them to 64 bits so that we can add bits for specifying threshold start/stop events and instruction sampling modes later. This also corrects the return value of can_go_on_limited_pmc; we were returning an event code rather than just a 0/1 value in some circumstances. That didn't particularly matter while event codes were 32-bit, but now that event codes are 64-bit it might, so this fixes it. [ Impact: extend PowerPC perfcounter interfaces from u32 to u64 ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18955.36874.472452.353104@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-14 11:29:14 +08:00
unsigned int psel, pmc;
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
unsigned int nalt = 1;
perf_counter: powerpc: use u64 for event codes internally Although the perf_counter API allows 63-bit raw event codes, internally in the powerpc back-end we had been using 32-bit event codes. This expands them to 64 bits so that we can add bits for specifying threshold start/stop events and instruction sampling modes later. This also corrects the return value of can_go_on_limited_pmc; we were returning an event code rather than just a 0/1 value in some circumstances. That didn't particularly matter while event codes were 32-bit, but now that event codes are 64-bit it might, so this fixes it. [ Impact: extend PowerPC perfcounter interfaces from u32 to u64 ] Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18955.36874.472452.353104@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-14 11:29:14 +08:00
u64 aevent;
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
alt[0] = event;
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
nlim = p6_limited_pmc_event(event);
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
/* check the alternatives table */
i = find_alternatives_list(event);
if (i >= 0) {
/* copy out alternatives from list */
for (j = 0; j < MAX_ALT; ++j) {
aevent = event_alternatives[i][j];
if (!aevent)
break;
if (aevent != event)
alt[nalt++] = aevent;
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
nlim += p6_limited_pmc_event(aevent);
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
}
} else {
/* Check for alternative ways of computing sum events */
/* PMCSEL 0x32 counter N == PMCSEL 0x34 counter 5-N */
psel = event & (PM_PMCSEL_MSK & ~1); /* ignore edge bit */
pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
if (pmc && (psel == 0x32 || psel == 0x34))
alt[nalt++] = ((event ^ 0x6) & ~PM_PMC_MSKS) |
((5 - pmc) << PM_PMC_SH);
/* PMCSEL 0x38 counter N == PMCSEL 0x3a counter N+/-2 */
if (pmc && (psel == 0x38 || psel == 0x3a))
alt[nalt++] = ((event ^ 0x2) & ~PM_PMC_MSKS) |
((pmc > 2? pmc - 2: pmc + 2) << PM_PMC_SH);
}
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
if (flags & PPMU_ONLY_COUNT_RUN) {
/*
* We're only counting in RUN state,
* so PM_CYC is equivalent to PM_RUN_CYC,
* PM_INST_CMPL === PM_RUN_INST_CMPL, PM_PURR === PM_RUN_PURR.
* This doesn't include alternatives that don't provide
* any extra flexibility in assigning PMCs (e.g.
* 0x10000a for PM_RUN_CYC vs. 0x1e for PM_CYC).
* Note that even with these additional alternatives
* we never end up with more than 4 alternatives for any event.
*/
j = nalt;
for (i = 0; i < nalt; ++i) {
switch (alt[i]) {
case 0x1e: /* PM_CYC */
alt[j++] = 0x600005; /* PM_RUN_CYC */
++nlim;
break;
case 0x10000a: /* PM_RUN_CYC */
alt[j++] = 0x1e; /* PM_CYC */
break;
case 2: /* PM_INST_CMPL */
alt[j++] = 0x500009; /* PM_RUN_INST_CMPL */
++nlim;
break;
case 0x500009: /* PM_RUN_INST_CMPL */
alt[j++] = 2; /* PM_INST_CMPL */
break;
case 0x10000e: /* PM_PURR */
alt[j++] = 0x4000f4; /* PM_RUN_PURR */
break;
case 0x4000f4: /* PM_RUN_PURR */
alt[j++] = 0x10000e; /* PM_PURR */
break;
}
}
nalt = j;
}
if (!(flags & PPMU_LIMITED_PMC_OK) && nlim) {
/* remove the limited PMC events */
j = 0;
for (i = 0; i < nalt; ++i) {
if (!p6_limited_pmc_event(alt[i])) {
alt[j] = alt[i];
++j;
}
}
nalt = j;
} else if ((flags & PPMU_LIMITED_PMC_REQD) && nlim < nalt) {
/* remove all but the limited PMC events */
j = 0;
for (i = 0; i < nalt; ++i) {
if (p6_limited_pmc_event(alt[i])) {
alt[j] = alt[i];
++j;
}
}
nalt = j;
}
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
return nalt;
}
powerpc/perf: Update cpu_hw_event to use `struct` for storing MMCR registers core-book3s currently uses array to store the MMCR registers as part of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct` to store mmcr regs instead of array. This will make code easier to read and reduces chance of any subtle bug that may come in the future, say when new registers are added. Patch updates all relevant code that was using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`. This includes the PMU driver code for supported platforms (power5 to power9) and ISA macros for counter support functions. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-2-git-send-email-atrajeev@linux.vnet.ibm.com
2020-07-17 22:38:13 +08:00
static void p6_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
{
/* Set PMCxSEL to 0 to disable PMCx */
perf_counter: powerpc: allow use of limited-function counters POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-29 20:38:51 +08:00
if (pmc <= 3)
powerpc/perf: Update cpu_hw_event to use `struct` for storing MMCR registers core-book3s currently uses array to store the MMCR registers as part of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct` to store mmcr regs instead of array. This will make code easier to read and reduces chance of any subtle bug that may come in the future, say when new registers are added. Patch updates all relevant code that was using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`. This includes the PMU driver code for supported platforms (power5 to power9) and ISA macros for counter support functions. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-2-git-send-email-atrajeev@linux.vnet.ibm.com
2020-07-17 22:38:13 +08:00
mmcr->mmcr1 &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc));
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
}
static int power6_generic_events[] = {
perf_counter: Standardize event names Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 20:06:28 +08:00
[PERF_COUNT_HW_CPU_CYCLES] = 0x1e,
[PERF_COUNT_HW_INSTRUCTIONS] = 2,
[PERF_COUNT_HW_CACHE_REFERENCES] = 0x280030, /* LD_REF_L1 */
[PERF_COUNT_HW_CACHE_MISSES] = 0x30000c, /* LD_MISS_L1 */
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x410a0, /* BR_PRED */
[PERF_COUNT_HW_BRANCH_MISSES] = 0x400052, /* BR_MPRED */
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
};
perf_counter: powerpc: Implement generalized cache events for POWER processors This adds tables of event codes for the generalized cache events for all the currently supported powerpc processors: POWER{4,5,5+,6,7} and PPC970*, plus powerpc-specific code to use these tables when a generalized cache event is requested. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18992.36430.933526.742969@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 12:55:42 +08:00
#define C(x) PERF_COUNT_HW_CACHE_##x
/*
* Table of generalized cache-related events.
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
* The "DTLB" and "ITLB" events relate to the DERAT and IERAT.
*/
powerpc/perf: Update Power PMU cache_events to u64 type Events of type PERF_TYPE_HW_CACHE was described for Power PMU as: int (*cache_events)[type][op][result]; where type, op, result values unpacked from the event attribute config value is used to generate the raw event code at runtime. So far the event code values which used to create these cache-related events were within 32 bit and `int` type worked. In power10, some of the event codes are of 64-bit value and hence update the Power PMU cache_events to `u64` type in `power_pmu` struct. Also propagate this change to existing all PMU driver code paths which are using ppmu->cache_events. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-4-git-send-email-atrajeev@linux.vnet.ibm.com
2020-07-17 22:38:15 +08:00
static u64 power6_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
perf_counter: powerpc: Implement generalized cache events for POWER processors This adds tables of event codes for the generalized cache events for all the currently supported powerpc processors: POWER{4,5,5+,6,7} and PPC970*, plus powerpc-specific code to use these tables when a generalized cache event is requested. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18992.36430.933526.742969@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 12:55:42 +08:00
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
powerpc/perf_event: Fix Power6 L1 cache read & write event codes] The current L1 cache read event code 0x80082 only counts for thread 0. The event code 0x280030 should be used to count events on thread 0 and 1. The patch fixes the event code for the L1 cache read. The current L1 cache write event code 0x80086 only counts for thread 0. The event code 0x180032 should be used to count events on thread 0 and 1. The patch fixes the event code for the L1 cache write. FYI, the documentation lists three event codes for the L1 cache read event and three event codes for the L1 cache write event. The event description for the event codes is as follows: L1 cache read requests 0x80082 LSU 0 only L1 cache read requests 0x8008A LSU 1 only L1 cache read requests 0x80030 LSU 1 or LSU 0, counter 2 only. L1 cache store requests 0x80086 LSU 0 only L1 cache store requests 0x8008E LSU 1 only L1 cache store requests 0x80032 LSU 0 or LSU 1, counter 1 only. There can only be one request from either LSU 0 or 1 active at a time. Signed-off-by: Carl Love <cel@us.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-28 19:23:33 +08:00
[C(OP_READ)] = { 0x280030, 0x80080 },
[C(OP_WRITE)] = { 0x180032, 0x80088 },
perf_counter: powerpc: Implement generalized cache events for POWER processors This adds tables of event codes for the generalized cache events for all the currently supported powerpc processors: POWER{4,5,5+,6,7} and PPC970*, plus powerpc-specific code to use these tables when a generalized cache event is requested. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18992.36430.933526.742969@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 12:55:42 +08:00
[C(OP_PREFETCH)] = { 0x810a4, 0 },
},
[C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0x100056 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { 0x4008c, 0 },
},
perf_counter: Rename L2 to LL cache The top (fastest) and last level (biggest) caches are the most interesting ones, performance wise. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> [ Fixed the Nehalem LL table to LLC Reference/Miss events ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 20:19:11 +08:00
[C(LL)] = { /* RESULT_ACCESS RESULT_MISS */
perf_counter: powerpc: Implement generalized cache events for POWER processors This adds tables of event codes for the generalized cache events for all the currently supported powerpc processors: POWER{4,5,5+,6,7} and PPC970*, plus powerpc-specific code to use these tables when a generalized cache event is requested. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18992.36430.933526.742969@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 12:55:42 +08:00
[C(OP_READ)] = { 0x150730, 0x250532 },
[C(OP_WRITE)] = { 0x250432, 0x150432 },
[C(OP_PREFETCH)] = { 0x810a6, 0 },
},
[C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0x20000e },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(ITLB)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0x420ce },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0x430e6, 0x400052 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
perf, arch: Add generic NODE cache events Add a NODE level to the generic cache events which is used to measure local vs remote memory accesses. Like all other cache events, an ACCESS is HIT+MISS, if there is no way to distinguish between reads and writes do reads only etc.. The below needs filling out for !x86 (which I filled out with unsupported events). I'm fairly sure ARM can leave it like that since it doesn't strike me as an architecture that even has NUMA support. SH might have something since it does appear to have some NUMA bits. Sparc64, PowerPC and MIPS certainly want a good look there since they clearly are NUMA capable. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: David Miller <davem@davemloft.net> Cc: Anton Blanchard <anton@samba.org> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1303508226.4865.8.camel@laptop Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-23 05:37:06 +08:00
[C(NODE)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { -1, -1 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
perf_counter: powerpc: Implement generalized cache events for POWER processors This adds tables of event codes for the generalized cache events for all the currently supported powerpc processors: POWER{4,5,5+,6,7} and PPC970*, plus powerpc-specific code to use these tables when a generalized cache event is requested. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18992.36430.933526.742969@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 12:55:42 +08:00
};
perf_counter: powerpc: Change how processor-specific back-ends get selected At present, the powerpc generic (processor-independent) perf_counter code has list of processor back-end modules, and at initialization, it looks at the PVR (processor version register) and has a switch statement to select a suitable processor-specific back-end. This is going to become inconvenient as we add more processor-specific back-ends, so this inverts the order: now each back-end checks whether it applies to the current processor, and registers itself if so. Furthermore, instead of looking at the PVR, back-ends now check the cur_cpu_spec->oprofile_cpu_type string and match on that. Lastly, each back-end now specifies a name for itself so the core can print a nice message when a back-end registers itself. This doesn't provide any support for unregistering back-ends, but that wouldn't be hard to do and would allow back-ends to be modules. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55529.762227.518531@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:52:09 +08:00
static struct power_pmu power6_pmu = {
.name = "POWER6",
perf_counter: powerpc: Use unsigned long for register and constraint values This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:51:13 +08:00
.n_counter = 6,
.max_alternatives = MAX_ALT,
.add_fields = 0x1555,
.test_adder = 0x3000,
.compute_mmcr = p6_compute_mmcr,
.get_constraint = p6_get_constraint,
.get_alternatives = p6_get_alternatives,
.disable_pmc = p6_disable_pmc,
.limited_pmc_event = p6_limited_pmc_event,
.flags = PPMU_LIMITED_PMC5_6 | PPMU_ALT_SIPR,
.n_generic = ARRAY_SIZE(power6_generic_events),
.generic_events = power6_generic_events,
.cache_events = &power6_cache_events,
powerpc/perf_counter: Add support for POWER6 This adds the back-end for the PMU on the POWER6 processor. Fortunately, the event selection hardware is somewhat simpler on POWER6 than on other POWER family processors, so the constraints fit into only 32 bits. Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-09 18:05:35 +08:00
};
perf_counter: powerpc: Change how processor-specific back-ends get selected At present, the powerpc generic (processor-independent) perf_counter code has list of processor back-end modules, and at initialization, it looks at the PVR (processor version register) and has a switch statement to select a suitable processor-specific back-end. This is going to become inconvenient as we add more processor-specific back-ends, so this inverts the order: now each back-end checks whether it applies to the current processor, and registers itself if so. Furthermore, instead of looking at the PVR, back-ends now check the cur_cpu_spec->oprofile_cpu_type string and match on that. Lastly, each back-end now specifies a name for itself so the core can print a nice message when a back-end registers itself. This doesn't provide any support for unregistering back-ends, but that wouldn't be hard to do and would allow back-ends to be modules. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55529.762227.518531@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:52:09 +08:00
powerpc/perf: Add __init attribute to eligible functions Some functions defined in 'arch/powerpc/perf' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-5-nick.child@ibm.com
2021-12-17 06:00:19 +08:00
int __init init_power6_pmu(void)
perf_counter: powerpc: Change how processor-specific back-ends get selected At present, the powerpc generic (processor-independent) perf_counter code has list of processor back-end modules, and at initialization, it looks at the PVR (processor version register) and has a switch statement to select a suitable processor-specific back-end. This is going to become inconvenient as we add more processor-specific back-ends, so this inverts the order: now each back-end checks whether it applies to the current processor, and registers itself if so. Furthermore, instead of looking at the PVR, back-ends now check the cur_cpu_spec->oprofile_cpu_type string and match on that. Lastly, each back-end now specifies a name for itself so the core can print a nice message when a back-end registers itself. This doesn't provide any support for unregistering back-ends, but that wouldn't be hard to do and would allow back-ends to be modules. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55529.762227.518531@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:52:09 +08:00
{
perf_counter/powerpc: Check oprofile_cpu_type for NULL before using it If the current CPU doesn't support performance counters, cur_cpu_spec->oprofile_cpu_type can be NULL. The current perf_counter modules don't test for that case and would thus crash at boot time. Bug reported by David Woodhouse. Reported-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Paul Mackerras <paulus@samba.org> LKML-Reference: <19066.48028.446975.501454@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-06 19:16:44 +08:00
if (!cur_cpu_spec->oprofile_cpu_type ||
strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6"))
perf_counter: powerpc: Change how processor-specific back-ends get selected At present, the powerpc generic (processor-independent) perf_counter code has list of processor back-end modules, and at initialization, it looks at the PVR (processor version register) and has a switch statement to select a suitable processor-specific back-end. This is going to become inconvenient as we add more processor-specific back-ends, so this inverts the order: now each back-end checks whether it applies to the current processor, and registers itself if so. Furthermore, instead of looking at the PVR, back-ends now check the cur_cpu_spec->oprofile_cpu_type string and match on that. Lastly, each back-end now specifies a name for itself so the core can print a nice message when a back-end registers itself. This doesn't provide any support for unregistering back-ends, but that wouldn't be hard to do and would allow back-ends to be modules. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55529.762227.518531@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-17 19:52:09 +08:00
return -ENODEV;
return register_power_pmu(&power6_pmu);
}
Reference in New Issue Copy Permalink