2019-05-19 20:07:45 +08:00
|
|
|
# SPDX-License-Identifier: GPL-2.0-only
|
2005-04-17 06:20:36 +08:00
|
|
|
config XFS_FS
|
|
|
|
|
tristate "XFS filesystem support"
|
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 02:45:40 +08:00
|
|
|
depends on BLOCK
|
2009-01-19 09:02:57 +08:00
|
|
|
select EXPORTFS
|
2012-11-16 06:20:37 +08:00
|
|
|
select LIBCRC32C
|
2016-06-21 07:53:44 +08:00
|
|
|
select FS_IOMAP
|
2005-04-17 06:20:36 +08:00
|
|
|
help
|
|
|
|
|
XFS is a high performance journaling filesystem which originated
|
|
|
|
|
on the SGI IRIX platform. It is completely multi-threaded, can
|
|
|
|
|
support large files and large filesystems, extended attributes,
|
|
|
|
|
variable block sizes, is extent based, and makes extensive use of
|
|
|
|
|
Btrees (directories, extents, free space) to aid both performance
|
|
|
|
|
and scalability.
|
|
|
|
|
|
|
|
|
|
Refer to the documentation at <http://oss.sgi.com/projects/xfs/>
|
|
|
|
|
for complete details. This implementation is on-disk compatible
|
|
|
|
|
with the IRIX version of XFS.
|
|
|
|
|
|
|
|
|
|
To compile this file system support as a module, choose M here: the
|
|
|
|
|
module will be called xfs. Be aware, however, that if the file
|
|
|
|
|
system of your root partition is compiled as a module, you'll need
|
|
|
|
|
to use an initial ramdisk (initrd) to boot.
|
|
|
|
|
|
2020-09-11 01:57:17 +08:00
|
|
|
config XFS_SUPPORT_V4
|
|
|
|
|
bool "Support deprecated V4 (crc=0) format"
|
2020-10-13 05:10:03 +08:00
|
|
|
depends on XFS_FS
|
2020-09-11 01:57:17 +08:00
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
The V4 filesystem format lacks certain features that are supported
|
|
|
|
|
by the V5 format, such as metadata checksumming, strengthened
|
|
|
|
|
metadata verification, and the ability to store timestamps past the
|
|
|
|
|
year 2038. Because of this, the V4 format is deprecated. All users
|
|
|
|
|
should upgrade by backing up their files, reformatting, and restoring
|
|
|
|
|
from the backup.
|
|
|
|
|
|
|
|
|
|
Administrators and users can detect a V4 filesystem by running
|
|
|
|
|
xfs_info against a filesystem mountpoint and checking for a string
|
|
|
|
|
beginning with "crc=". If the string "crc=0" is found, the
|
|
|
|
|
filesystem is a V4 filesystem. If no such string is found, please
|
|
|
|
|
upgrade xfsprogs to the latest version and try again.
|
|
|
|
|
|
|
|
|
|
This option will become default N in September 2025. Support for the
|
|
|
|
|
V4 format will be removed entirely in September 2030. Distributors
|
|
|
|
|
can say N here to withdraw support earlier.
|
|
|
|
|
|
|
|
|
|
To continue supporting the old V4 format (crc=0), say Y.
|
|
|
|
|
To close off an attack surface, say N.
|
|
|
|
|
|
2023-04-12 10:05:19 +08:00
|
|
|
config XFS_SUPPORT_ASCII_CI
|
|
|
|
|
bool "Support deprecated case-insensitive ascii (ascii-ci=1) format"
|
|
|
|
|
depends on XFS_FS
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
The ASCII case insensitivity filesystem feature only works correctly
|
|
|
|
|
on systems that have been coerced into using ISO 8859-1, and it does
|
|
|
|
|
not work on extended attributes. The kernel has no visibility into
|
|
|
|
|
the locale settings in userspace, so it corrupts UTF-8 names.
|
|
|
|
|
Enabling this feature makes XFS vulnerable to mixed case sensitivity
|
|
|
|
|
attacks. Because of this, the feature is deprecated. All users
|
|
|
|
|
should upgrade by backing up their files, reformatting, and restoring
|
|
|
|
|
from the backup.
|
|
|
|
|
|
|
|
|
|
Administrators and users can detect such a filesystem by running
|
|
|
|
|
xfs_info against a filesystem mountpoint and checking for a string
|
|
|
|
|
beginning with "ascii-ci=". If the string "ascii-ci=1" is found, the
|
|
|
|
|
filesystem is a case-insensitive filesystem. If no such string is
|
|
|
|
|
found, please upgrade xfsprogs to the latest version and try again.
|
|
|
|
|
|
|
|
|
|
This option will become default N in September 2025. Support for the
|
|
|
|
|
feature will be removed entirely in September 2030. Distributors
|
|
|
|
|
can say N here to withdraw support earlier.
|
|
|
|
|
|
|
|
|
|
To continue supporting case-insensitivity (ascii-ci=1), say Y.
|
|
|
|
|
To close off an attack surface, say N.
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
config XFS_QUOTA
|
2005-11-03 10:55:06 +08:00
|
|
|
bool "XFS Quota support"
|
2005-04-17 06:20:36 +08:00
|
|
|
depends on XFS_FS
|
2010-08-17 18:14:44 +08:00
|
|
|
select QUOTACTL
|
2005-04-17 06:20:36 +08:00
|
|
|
help
|
|
|
|
|
If you say Y here, you will be able to set limits for disk usage on
|
|
|
|
|
a per user and/or a per group basis under XFS. XFS considers quota
|
|
|
|
|
information as filesystem metadata and uses journaling to provide a
|
|
|
|
|
higher level guarantee of consistency. The on-disk data format for
|
|
|
|
|
quota is also compatible with the IRIX version of XFS, allowing a
|
|
|
|
|
filesystem to be migrated between Linux and IRIX without any need
|
|
|
|
|
for conversion.
|
|
|
|
|
|
|
|
|
|
If unsure, say N. More comprehensive documentation can be found in
|
|
|
|
|
README.quota in the xfsprogs package. XFS quota can be used either
|
|
|
|
|
with or without the generic quota support enabled (CONFIG_QUOTA) -
|
|
|
|
|
they are completely independent subsystems.
|
|
|
|
|
|
|
|
|
|
config XFS_POSIX_ACL
|
2005-09-08 13:34:58 +08:00
|
|
|
bool "XFS POSIX ACL support"
|
2005-04-17 06:20:36 +08:00
|
|
|
depends on XFS_FS
|
2009-06-10 23:07:47 +08:00
|
|
|
select FS_POSIX_ACL
|
2005-04-17 06:20:36 +08:00
|
|
|
help
|
|
|
|
|
POSIX Access Control Lists (ACLs) support permissions for users and
|
|
|
|
|
groups beyond the owner/group/world scheme.
|
|
|
|
|
|
|
|
|
|
If you don't know what Access Control Lists are, say N.
|
|
|
|
|
|
2005-09-08 13:34:58 +08:00
|
|
|
config XFS_RT
|
2006-06-13 14:28:11 +08:00
|
|
|
bool "XFS Realtime subvolume support"
|
|
|
|
|
depends on XFS_FS
|
2005-09-08 13:34:58 +08:00
|
|
|
help
|
|
|
|
|
If you say Y here you will be able to mount and use XFS filesystems
|
2006-06-13 14:28:11 +08:00
|
|
|
which contain a realtime subvolume. The realtime subvolume is a
|
|
|
|
|
separate area of disk space where only file data is stored. It was
|
|
|
|
|
originally designed to provide deterministic data rates suitable
|
|
|
|
|
for media streaming applications, but is also useful as a generic
|
|
|
|
|
mechanism for ensuring data and metadata/log I/Os are completely
|
|
|
|
|
separated. Regular file I/Os are isolated to a separate device
|
|
|
|
|
from all other requests, and this can be done quite transparently
|
|
|
|
|
to applications via the inherit-realtime directory inode flag.
|
2005-09-08 13:34:58 +08:00
|
|
|
|
2006-06-13 14:28:11 +08:00
|
|
|
See the xfs man page in section 5 for additional information.
|
2005-09-08 13:34:58 +08:00
|
|
|
|
|
|
|
|
If unsure, say N.
|
2008-04-21 15:22:27 +08:00
|
|
|
|
xfs: allow queued AG intents to drain before scrubbing
When a writer thread executes a chain of log intent items, the AG header
buffer locks will cycle during a transaction roll to get from one intent
item to the next in a chain. Although scrub takes all AG header buffer
locks, this isn't sufficient to guard against scrub checking an AG while
that writer thread is in the middle of finishing a chain because there's
no higher level locking primitive guarding allocation groups.
When there's a collision, cross-referencing between data structures
(e.g. rmapbt and refcountbt) yields false corruption events; if repair
is running, this results in incorrect repairs, which is catastrophic.
Fix this by adding to the perag structure the count of active intents
and make scrub wait until it has both AG header buffer locks and the
intent counter reaches zero.
One quirk of the drain code is that deferred bmap updates also bump and
drop the intent counter. A fundamental decision made during the design
phase of the reverse mapping feature is that updates to the rmapbt
records are always made by the same code that updates the primary
metadata. In other words, callers of bmapi functions expect that the
bmapi functions will queue deferred rmap updates.
Some parts of the reflink code queue deferred refcount (CUI) and bmap
(BUI) updates in the same head transaction, but the deferred work
manager completely finishes the CUI before the BUI work is started. As
a result, the CUI drops the intent count long before the deferred rmap
(RUI) update even has a chance to bump the intent count. The only way
to keep the intent count elevated between the CUI and RUI is for the BUI
to bump the counter until the RUI has been created.
A second quirk of the intent drain code is that deferred work items must
increment the intent counter as soon as the work item is added to the
transaction. When a BUI completes and queues an RUI, the RUI must
increment the counter before the BUI decrements it. The only way to
accomplish this is to require that the counter be bumped as soon as the
deferred work item is created in memory.
In the next patches we'll improve on this facility, but this patch
provides the basic functionality.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-04-12 09:59:58 +08:00
|
|
|
config XFS_DRAIN_INTENTS
|
|
|
|
|
bool
|
2023-04-12 09:59:59 +08:00
|
|
|
select JUMP_LABEL if HAVE_ARCH_JUMP_LABEL
|
xfs: allow queued AG intents to drain before scrubbing
When a writer thread executes a chain of log intent items, the AG header
buffer locks will cycle during a transaction roll to get from one intent
item to the next in a chain. Although scrub takes all AG header buffer
locks, this isn't sufficient to guard against scrub checking an AG while
that writer thread is in the middle of finishing a chain because there's
no higher level locking primitive guarding allocation groups.
When there's a collision, cross-referencing between data structures
(e.g. rmapbt and refcountbt) yields false corruption events; if repair
is running, this results in incorrect repairs, which is catastrophic.
Fix this by adding to the perag structure the count of active intents
and make scrub wait until it has both AG header buffer locks and the
intent counter reaches zero.
One quirk of the drain code is that deferred bmap updates also bump and
drop the intent counter. A fundamental decision made during the design
phase of the reverse mapping feature is that updates to the rmapbt
records are always made by the same code that updates the primary
metadata. In other words, callers of bmapi functions expect that the
bmapi functions will queue deferred rmap updates.
Some parts of the reflink code queue deferred refcount (CUI) and bmap
(BUI) updates in the same head transaction, but the deferred work
manager completely finishes the CUI before the BUI work is started. As
a result, the CUI drops the intent count long before the deferred rmap
(RUI) update even has a chance to bump the intent count. The only way
to keep the intent count elevated between the CUI and RUI is for the BUI
to bump the counter until the RUI has been created.
A second quirk of the intent drain code is that deferred work items must
increment the intent counter as soon as the work item is added to the
transaction. When a BUI completes and queues an RUI, the RUI must
increment the counter before the BUI decrements it. The only way to
accomplish this is to require that the counter be bumped as soon as the
deferred work item is created in memory.
In the next patches we'll improve on this facility, but this patch
provides the basic functionality.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-04-12 09:59:58 +08:00
|
|
|
|
2017-10-18 12:37:34 +08:00
|
|
|
config XFS_ONLINE_SCRUB
|
|
|
|
|
bool "XFS online metadata check support"
|
|
|
|
|
default n
|
|
|
|
|
depends on XFS_FS
|
2023-08-10 22:48:04 +08:00
|
|
|
depends on TMPFS && SHMEM
|
xfs: allow queued AG intents to drain before scrubbing
When a writer thread executes a chain of log intent items, the AG header
buffer locks will cycle during a transaction roll to get from one intent
item to the next in a chain. Although scrub takes all AG header buffer
locks, this isn't sufficient to guard against scrub checking an AG while
that writer thread is in the middle of finishing a chain because there's
no higher level locking primitive guarding allocation groups.
When there's a collision, cross-referencing between data structures
(e.g. rmapbt and refcountbt) yields false corruption events; if repair
is running, this results in incorrect repairs, which is catastrophic.
Fix this by adding to the perag structure the count of active intents
and make scrub wait until it has both AG header buffer locks and the
intent counter reaches zero.
One quirk of the drain code is that deferred bmap updates also bump and
drop the intent counter. A fundamental decision made during the design
phase of the reverse mapping feature is that updates to the rmapbt
records are always made by the same code that updates the primary
metadata. In other words, callers of bmapi functions expect that the
bmapi functions will queue deferred rmap updates.
Some parts of the reflink code queue deferred refcount (CUI) and bmap
(BUI) updates in the same head transaction, but the deferred work
manager completely finishes the CUI before the BUI work is started. As
a result, the CUI drops the intent count long before the deferred rmap
(RUI) update even has a chance to bump the intent count. The only way
to keep the intent count elevated between the CUI and RUI is for the BUI
to bump the counter until the RUI has been created.
A second quirk of the intent drain code is that deferred work items must
increment the intent counter as soon as the work item is added to the
transaction. When a BUI completes and queues an RUI, the RUI must
increment the counter before the BUI decrements it. The only way to
accomplish this is to require that the counter be bumped as soon as the
deferred work item is created in memory.
In the next patches we'll improve on this facility, but this patch
provides the basic functionality.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2023-04-12 09:59:58 +08:00
|
|
|
select XFS_DRAIN_INTENTS
|
2017-10-18 12:37:34 +08:00
|
|
|
help
|
|
|
|
|
If you say Y here you will be able to check metadata on a
|
|
|
|
|
mounted XFS filesystem. This feature is intended to reduce
|
|
|
|
|
filesystem downtime by supplementing xfs_repair. The key
|
|
|
|
|
advantage here is to look for problems proactively so that
|
|
|
|
|
they can be dealt with in a controlled manner.
|
|
|
|
|
|
|
|
|
|
This feature is considered EXPERIMENTAL. Use with caution!
|
|
|
|
|
|
|
|
|
|
See the xfs_scrub man page in section 8 for additional information.
|
|
|
|
|
|
|
|
|
|
If unsure, say N.
|
|
|
|
|
|
2023-08-10 22:48:07 +08:00
|
|
|
config XFS_ONLINE_SCRUB_STATS
|
|
|
|
|
bool "XFS online metadata check usage data collection"
|
|
|
|
|
default y
|
|
|
|
|
depends on XFS_ONLINE_SCRUB
|
|
|
|
|
select FS_DEBUG
|
|
|
|
|
help
|
|
|
|
|
If you say Y here, the kernel will gather usage data about
|
|
|
|
|
the online metadata check subsystem. This includes the number
|
|
|
|
|
of invocations, the outcomes, and the results of repairs, if any.
|
|
|
|
|
This may slow down scrub slightly due to the use of high precision
|
|
|
|
|
timers and the need to merge per-invocation information into the
|
|
|
|
|
filesystem counters.
|
|
|
|
|
|
|
|
|
|
Usage data are collected in /sys/kernel/debug/xfs/scrub.
|
|
|
|
|
|
|
|
|
|
If unsure, say N.
|
|
|
|
|
|
2018-05-14 21:34:36 +08:00
|
|
|
config XFS_ONLINE_REPAIR
|
|
|
|
|
bool "XFS online metadata repair support"
|
|
|
|
|
default n
|
|
|
|
|
depends on XFS_FS && XFS_ONLINE_SCRUB
|
|
|
|
|
help
|
|
|
|
|
If you say Y here you will be able to repair metadata on a
|
|
|
|
|
mounted XFS filesystem. This feature is intended to reduce
|
|
|
|
|
filesystem downtime by fixing minor problems before they cause the
|
|
|
|
|
filesystem to go down. However, it requires that the filesystem be
|
|
|
|
|
formatted with secondary metadata, such as reverse mappings and inode
|
|
|
|
|
parent pointers.
|
|
|
|
|
|
|
|
|
|
This feature is considered EXPERIMENTAL. Use with caution!
|
|
|
|
|
|
|
|
|
|
See the xfs_scrub man page in section 8 for additional information.
|
|
|
|
|
|
|
|
|
|
If unsure, say N.
|
|
|
|
|
|
2013-04-30 19:39:34 +08:00
|
|
|
config XFS_WARN
|
|
|
|
|
bool "XFS Verbose Warnings"
|
|
|
|
|
depends on XFS_FS && !XFS_DEBUG
|
|
|
|
|
help
|
|
|
|
|
Say Y here to get an XFS build with many additional warnings.
|
|
|
|
|
It converts ASSERT checks to WARN, so will log any out-of-bounds
|
|
|
|
|
conditions that occur that would otherwise be missed. It is much
|
|
|
|
|
lighter weight than XFS_DEBUG and does not modify algorithms and will
|
|
|
|
|
not cause the kernel to panic on non-fatal errors.
|
|
|
|
|
|
|
|
|
|
However, similar to XFS_DEBUG, it is only advisable to use this if you
|
|
|
|
|
are debugging a particular problem.
|
|
|
|
|
|
2008-04-21 15:22:27 +08:00
|
|
|
config XFS_DEBUG
|
2012-10-03 02:19:27 +08:00
|
|
|
bool "XFS Debugging support"
|
|
|
|
|
depends on XFS_FS
|
2008-04-21 15:22:27 +08:00
|
|
|
help
|
|
|
|
|
Say Y here to get an XFS build with many debugging features,
|
|
|
|
|
including ASSERT checks, function wrappers around macros,
|
|
|
|
|
and extra sanity-checking functions in various code paths.
|
|
|
|
|
|
|
|
|
|
Note that the resulting code will be HUGE and SLOW, and probably
|
|
|
|
|
not useful unless you are debugging a particular problem.
|
|
|
|
|
|
|
|
|
|
Say N unless you are an XFS developer, or you play one on TV.
|
2017-06-15 12:29:13 +08:00
|
|
|
|
|
|
|
|
config XFS_ASSERT_FATAL
|
|
|
|
|
bool "XFS fatal asserts"
|
|
|
|
|
default y
|
|
|
|
|
depends on XFS_FS && XFS_DEBUG
|
|
|
|
|
help
|
|
|
|
|
Set the default DEBUG mode ASSERT failure behavior.
|
|
|
|
|
|
|
|
|
|
Say Y here to cause DEBUG mode ASSERT failures to result in fatal
|
|
|
|
|
errors that BUG() the kernel by default. If you say N, ASSERT failures
|
|
|
|
|
result in warnings.
|
|
|
|
|
|
|
|
|
|
This behavior can be modified at runtime via sysfs.
|
