korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-18 09:44:18 +08:00
Code Issues Packages Projects Releases Wiki Activity
f13ac41f51
linux/drivers/net/macsonic.c

667 lines
19 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* macsonic.c
*
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
* (C) 2005 Finn Thain
*
* Converted to DMA API, converted to unified driver model, made it work as
* a module again, and from the mac68k project, introduced more 32-bit cards
* and dhd's support for 16-bit cards.
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* (C) 1998 Alan Cox
*
* Debugging Andreas Ehliar, Michael Schmitz
*
* Based on code
* (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de)
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* This driver is based on work from Andreas Busse, but most of
* the code is rewritten.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
*
* A driver for the Mac onboard Sonic ethernet chip.
*
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
* 98/12/21 MSch: judged from tests on Q800, it's basically working,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* but eating up both receive and transmit resources
* and duplicating packets. Needs more testing.
*
* 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed.
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems
* on centris.
*/
#include <linux/kernel.h>
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
#include <linux/module.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/types.h>
#include <linux/fcntl.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/nubus.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
Create platform_device.h to contain all the platform device details. Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-30 02:07:23 +08:00
#include <linux/platform_device.h>
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
#include <linux/dma-mapping.h>
[PATCH] missing include in macsonic Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 00:05:22 +08:00
#include <linux/bitrev.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/bootinfo.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <asm/hwtest.h>
#include <asm/dma.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_via.h>
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
static char mac_sonic_string[] = "macsonic";
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "sonic.h"
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
/* These should basically be bus-size and endian independent (since
the SONIC is at least smart enough that it uses the same endianness
as the host, unlike certain less enlightened Macintosh NICs) */
#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \
+ lp->reg_offset))
#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \
+ lp->reg_offset))
/* use 0 for production, 1 for verification, >1 for debug */
#ifdef SONIC_DEBUG
static unsigned int sonic_debug = SONIC_DEBUG;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
#else
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
static unsigned int sonic_debug = 1;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int sonic_version_printed;
/* For onboard SONIC */
#define ONBOARD_SONIC_REGISTERS 0x50F0A000
#define ONBOARD_SONIC_PROM_BASE 0x50f08000
enum macsonic_type {
MACSONIC_DUODOCK,
MACSONIC_APPLE,
MACSONIC_APPLE16,
MACSONIC_DAYNA,
MACSONIC_DAYNALINK
};
/* For the built-in SONIC in the Duo Dock */
#define DUODOCK_SONIC_REGISTERS 0xe10000
#define DUODOCK_SONIC_PROM_BASE 0xe12000
/* For Apple-style NuBus SONIC */
#define APPLE_SONIC_REGISTERS 0
#define APPLE_SONIC_PROM_BASE 0x40000
/* Daynalink LC SONIC */
#define DAYNALINK_PROM_BASE 0x400000
/* For Dayna-style NuBus SONIC (haven't seen one yet) */
#define DAYNA_SONIC_REGISTERS 0x180000
/* This is what OpenBSD says. However, this is definitely in NuBus
ROM space so we should be able to get it by walking the NuBus
resource directories */
#define DAYNA_SONIC_MAC_ADDR 0xffe004
#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr)
/*
* For reversing the PROM address
*/
static inline void bit_reverse_addr(unsigned char addr[6])
{
int i;
for(i = 0; i < 6; i++)
net: use bitrev8 Use bitrev8 for bmac, mace, macmace, macsonic, and skfp drivers. [akpm@osdl.org: use the API, not the array] Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mirko Lindner <mlindner@syskonnect.de> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-20 05:09:08 +08:00
addr[i] = bitrev8(addr[i]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
SONIC interrupt handling Install the built-in macsonic interrupt handler on both IRQs when using via_alt_mapping. Otherwise the rare interrupt that still comes from the nubus slot will wedge the nubus. $ cat /proc/interrupts auto 2: 89176 via2 auto 3: 744367 sonic auto 4: 0 scc auto 6: 318363 via1 auto 7: 0 NMI mac 9: 119413 framebuffer vbl mac 10: 1971 ADB mac 14: 198517 timer mac 17: 89104 nubus mac 19: 72 Mac ESP SCSI mac 56: 629 sonic mac 62: 1142593 ide0 Version 1 of this patch had a bug where a nubus sonic card would register two interrupt handlers. Only a built-in sonic needs both. Versions 2 and 3 needed some cleanups, as Raylynn Knight and Christoph Hellwig pointed out (thanks). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 10:55:56 +08:00
static irqreturn_t macsonic_interrupt(int irq, void *dev_id)
{
irqreturn_t result;
unsigned long flags;
local_irq_save(flags);
result = sonic_interrupt(irq, dev_id);
local_irq_restore(flags);
return result;
}
static int macsonic_open(struct net_device* dev)
{
macsonic: free irqs if sonic_open() fails macsonic_open() doesn't check sonic_open() return code. If it is error we must free requested IRQs. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-10 09:39:06 +08:00
int retval;
retval = request_irq(dev->irq, sonic_interrupt, IRQ_FLG_FAST,
"sonic", dev);
if (retval) {
printk(KERN_ERR "%s: unable to get IRQ %d.\n",
dev->name, dev->irq);
goto err;
SONIC interrupt handling Install the built-in macsonic interrupt handler on both IRQs when using via_alt_mapping. Otherwise the rare interrupt that still comes from the nubus slot will wedge the nubus. $ cat /proc/interrupts auto 2: 89176 via2 auto 3: 744367 sonic auto 4: 0 scc auto 6: 318363 via1 auto 7: 0 NMI mac 9: 119413 framebuffer vbl mac 10: 1971 ADB mac 14: 198517 timer mac 17: 89104 nubus mac 19: 72 Mac ESP SCSI mac 56: 629 sonic mac 62: 1142593 ide0 Version 1 of this patch had a bug where a nubus sonic card would register two interrupt handlers. Only a built-in sonic needs both. Versions 2 and 3 needed some cleanups, as Raylynn Knight and Christoph Hellwig pointed out (thanks). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 10:55:56 +08:00
}
/* Under the A/UX interrupt scheme, the onboard SONIC interrupt comes
* in at priority level 3. However, we sometimes get the level 2 inter-
* rupt as well, which must prevent re-entrance of the sonic handler.
*/
macsonic: free irqs if sonic_open() fails macsonic_open() doesn't check sonic_open() return code. If it is error we must free requested IRQs. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-10 09:39:06 +08:00
if (dev->irq == IRQ_AUTO_3) {
retval = request_irq(IRQ_NUBUS_9, macsonic_interrupt,
IRQ_FLG_FAST, "sonic", dev);
if (retval) {
printk(KERN_ERR "%s: unable to get IRQ %d.\n",
dev->name, IRQ_NUBUS_9);
goto err_irq;
SONIC interrupt handling Install the built-in macsonic interrupt handler on both IRQs when using via_alt_mapping. Otherwise the rare interrupt that still comes from the nubus slot will wedge the nubus. $ cat /proc/interrupts auto 2: 89176 via2 auto 3: 744367 sonic auto 4: 0 scc auto 6: 318363 via1 auto 7: 0 NMI mac 9: 119413 framebuffer vbl mac 10: 1971 ADB mac 14: 198517 timer mac 17: 89104 nubus mac 19: 72 Mac ESP SCSI mac 56: 629 sonic mac 62: 1142593 ide0 Version 1 of this patch had a bug where a nubus sonic card would register two interrupt handlers. Only a built-in sonic needs both. Versions 2 and 3 needed some cleanups, as Raylynn Knight and Christoph Hellwig pointed out (thanks). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 10:55:56 +08:00
}
macsonic: free irqs if sonic_open() fails macsonic_open() doesn't check sonic_open() return code. If it is error we must free requested IRQs. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-10 09:39:06 +08:00
}
retval = sonic_open(dev);
if (retval)
goto err_irq_nubus;
return 0;
err_irq_nubus:
if (dev->irq == IRQ_AUTO_3)
free_irq(IRQ_NUBUS_9, dev);
err_irq:
free_irq(dev->irq, dev);
err:
return retval;
SONIC interrupt handling Install the built-in macsonic interrupt handler on both IRQs when using via_alt_mapping. Otherwise the rare interrupt that still comes from the nubus slot will wedge the nubus. $ cat /proc/interrupts auto 2: 89176 via2 auto 3: 744367 sonic auto 4: 0 scc auto 6: 318363 via1 auto 7: 0 NMI mac 9: 119413 framebuffer vbl mac 10: 1971 ADB mac 14: 198517 timer mac 17: 89104 nubus mac 19: 72 Mac ESP SCSI mac 56: 629 sonic mac 62: 1142593 ide0 Version 1 of this patch had a bug where a nubus sonic card would register two interrupt handlers. Only a built-in sonic needs both. Versions 2 and 3 needed some cleanups, as Raylynn Knight and Christoph Hellwig pointed out (thanks). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 10:55:56 +08:00
}
static int macsonic_close(struct net_device* dev)
{
int err;
err = sonic_close(dev);
free_irq(dev->irq, dev);
if (dev->irq == IRQ_AUTO_3)
free_irq(IRQ_NUBUS_9, dev);
return err;
}
macsonic: convert to net_device_ops Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11 15:41:28 +08:00
static const struct net_device_ops macsonic_netdev_ops = {
.ndo_open = macsonic_open,
.ndo_stop = macsonic_close,
.ndo_start_xmit = sonic_send_packet,
.ndo_set_multicast_list = sonic_multicast_list,
.ndo_tx_timeout = sonic_tx_timeout,
.ndo_get_stats = sonic_get_stats,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
};
macsonic: move probe function to .devinit.text A pointer to mac_sonic_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. Various other functions that are called by mac_sonic_probe need to move to .devinit.text, too. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12 04:52:48 +08:00
static int __devinit macsonic_init(struct net_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
struct sonic_local* lp = netdev_priv(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Allocate the entire chunk of memory for the descriptors.
Note that this cannot cross a 64K boundary. */
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
if ((lp->descriptors = dma_alloc_coherent(lp->device,
SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
&lp->descriptors_laddr, GFP_KERNEL)) == NULL) {
net: struct device - replace bus_id with dev_name(), dev_set_name() Cc: davem@davemloft.net Cc: netdev@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-25 07:38:22 +08:00
printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n",
dev_name(lp->device));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -ENOMEM;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Now set up the pointers to point to the appropriate places */
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
lp->cda = lp->descriptors;
lp->tda = lp->cda + (SIZEOF_SONIC_CDA
* SONIC_BUS_SCALE(lp->dma_bitmode));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
* SONIC_BUS_SCALE(lp->dma_bitmode));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
* SONIC_BUS_SCALE(lp->dma_bitmode));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
lp->cda_laddr = lp->descriptors_laddr;
lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
macsonic: convert to net_device_ops Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11 15:41:28 +08:00
dev->netdev_ops = &macsonic_netdev_ops;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
dev->watchdog_timeo = TX_TIMEOUT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* clear tally counter
*/
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
SONIC_WRITE(SONIC_CRCT, 0xffff);
SONIC_WRITE(SONIC_FAET, 0xffff);
SONIC_WRITE(SONIC_MPT, 0xffff);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 11:42:40 +08:00
#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \
memcmp(mac, "\x00\xA0\x40", 3) && \
memcmp(mac, "\x00\x80\x19", 3) && \
memcmp(mac, "\x00\x05\x02", 3))
static void __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
struct sonic_local *lp = netdev_priv(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
const int prom_addr = ONBOARD_SONIC_PROM_BASE;
macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 11:42:40 +08:00
unsigned short val;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 11:42:40 +08:00
/*
* On NuBus boards we can sometimes look in the ROM resources.
* No such luck for comm-slot/onboard.
* On the PowerBook 520, the PROM base address is a mystery.
*/
if (hwreg_present((void *)prom_addr)) {
int i;
for (i = 0; i < 6; i++)
dev->dev_addr[i] = SONIC_READ_PROM(i);
if (!INVALID_MAC(dev->dev_addr))
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 11:42:40 +08:00
/*
* Most of the time, the address is bit-reversed. The NetBSD
* source has a rather long and detailed historical account of
* why this is so.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bit_reverse_addr(dev->dev_addr);
macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 11:42:40 +08:00
if (!INVALID_MAC(dev->dev_addr))
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 11:42:40 +08:00
* If we still have what seems to be a bogus address, we'll
* look in the CAM. The top entry should be ours.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 11:42:40 +08:00
printk(KERN_WARNING "macsonic: MAC address in PROM seems "
"to be invalid, trying CAM\n");
} else {
printk(KERN_WARNING "macsonic: cannot read MAC address from "
"PROM, trying CAM\n");
}
/* This only works if MacOS has already initialized the card. */
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
SONIC_WRITE(SONIC_CEP, 15);
val = SONIC_READ(SONIC_CAP2);
dev->dev_addr[5] = val >> 8;
dev->dev_addr[4] = val & 0xff;
val = SONIC_READ(SONIC_CAP1);
dev->dev_addr[3] = val >> 8;
dev->dev_addr[2] = val & 0xff;
val = SONIC_READ(SONIC_CAP0);
dev->dev_addr[1] = val >> 8;
dev->dev_addr[0] = val & 0xff;
if (!INVALID_MAC(dev->dev_addr))
return;
/* Still nonsense ... messed up someplace! */
printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 "
"seems invalid, will use a random MAC\n");
random_ether_addr(dev->dev_addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
macsonic: move probe function to .devinit.text A pointer to mac_sonic_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. Various other functions that are called by mac_sonic_probe need to move to .devinit.text, too. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12 04:52:48 +08:00
static int __devinit mac_onboard_sonic_probe(struct net_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
/* Bwahahaha */
static int once_is_more_than_enough;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
struct sonic_local* lp = netdev_priv(dev);
int sr;
int commslot = 0;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (once_is_more_than_enough)
return -ENODEV;
once_is_more_than_enough = 1;
if (!MACH_IS_MAC)
return -ENODEV;
if (macintosh_config->ether_type != MAC_ETHER_SONIC)
return -ENODEV;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. ");
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Bogus probing, on the models which may or may not have
Ethernet (BTW, the Ethernet *is* always at the same
address, and nothing else lives there, at least if Apple's
documentation is to be believed) */
if (macintosh_config->ident == MAC_MODEL_Q630 ||
macintosh_config->ident == MAC_MODEL_P588 ||
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
macintosh_config->ident == MAC_MODEL_P575 ||
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
macintosh_config->ident == MAC_MODEL_C610) {
unsigned long flags;
int card_present;
local_irq_save(flags);
card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS);
local_irq_restore(flags);
if (!card_present) {
printk("none.\n");
return -ENODEV;
}
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
commslot = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
printk("yes\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
/* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
* and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev->base_addr = ONBOARD_SONIC_REGISTERS;
if (via_alt_mapping)
dev->irq = IRQ_AUTO_3;
else
dev->irq = IRQ_NUBUS_9;
if (!sonic_version_printed) {
printk(KERN_INFO "%s", version);
sonic_version_printed = 1;
}
printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n",
net: struct device - replace bus_id with dev_name(), dev_set_name() Cc: davem@davemloft.net Cc: netdev@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-25 07:38:22 +08:00
dev_name(lp->device), dev->base_addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* The PowerBook's SONIC is 16 bit always. */
if (macintosh_config->ident == MAC_MODEL_PB520) {
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
lp->reg_offset = 0;
lp->dma_bitmode = SONIC_BITMODE16;
sr = SONIC_READ(SONIC_SR);
} else if (commslot) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Some of the comm-slot cards are 16 bit. But some
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
of them are not. The 32-bit cards use offset 2 and
have known revisions, we try reading the revision
register at offset 2, if we don't get a known revision
we assume 16 bit at offset 0. */
lp->reg_offset = 2;
lp->dma_bitmode = SONIC_BITMODE16;
sr = SONIC_READ(SONIC_SR);
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101)
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
/* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */
lp->dma_bitmode = SONIC_BITMODE32;
else {
lp->dma_bitmode = SONIC_BITMODE16;
lp->reg_offset = 0;
sr = SONIC_READ(SONIC_SR);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
} else {
/* All onboard cards are at offset 2 with 32 bit DMA. */
lp->reg_offset = 2;
lp->dma_bitmode = SONIC_BITMODE32;
sr = SONIC_READ(SONIC_SR);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
printk(KERN_INFO
"%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
net: struct device - replace bus_id with dev_name(), dev_set_name() Cc: davem@davemloft.net Cc: netdev@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-25 07:38:22 +08:00
dev_name(lp->device), sr, lp->dma_bitmode?32:16, lp->reg_offset);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
net: struct device - replace bus_id with dev_name(), dev_set_name() Cc: davem@davemloft.net Cc: netdev@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-25 07:38:22 +08:00
printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Software reset, then initialize control registers. */
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS |
SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
(lp->dma_bitmode ? SONIC_DCR_DW : 0));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* This *must* be written back to in order to restore the
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
* extended programmable output bits, as it may not have been
* initialised since the hardware reset. */
SONIC_WRITE(SONIC_DCR2, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Clear *and* disable interrupts to be on the safe side */
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
SONIC_WRITE(SONIC_IMR, 0);
SONIC_WRITE(SONIC_ISR, 0x7fff);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Now look for the MAC address. */
macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03 11:42:40 +08:00
mac_onboard_sonic_ethernet_addr(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Shared init code */
return macsonic_init(dev);
}
macsonic: move probe function to .devinit.text A pointer to mac_sonic_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. Various other functions that are called by mac_sonic_probe need to move to .devinit.text, too. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12 04:52:48 +08:00
static int __devinit mac_nubus_sonic_ethernet_addr(struct net_device *dev,
drivers/net/macsonic.c: make functions static This patch makes the following needlessly global functions static: - macsonic_init() - mac_onboard_sonic_ethernet_addr() - mac_onboard_sonic_probe() - mac_nubus_sonic_ethernet_addr() - macsonic_ident() - mac_nubus_sonic_probe() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-10 06:23:47 +08:00
unsigned long prom_addr,
int id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int i;
for(i = 0; i < 6; i++)
dev->dev_addr[i] = SONIC_READ_PROM(i);
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
/* Some of the addresses are bit-reversed */
if (id != MACSONIC_DAYNA)
bit_reverse_addr(dev->dev_addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
macsonic: move probe function to .devinit.text A pointer to mac_sonic_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. Various other functions that are called by mac_sonic_probe need to move to .devinit.text, too. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12 04:52:48 +08:00
static int __devinit macsonic_ident(struct nubus_dev *ndev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ndev->dr_sw == NUBUS_DRSW_SONIC_LC)
return MACSONIC_DAYNALINK;
if (ndev->dr_hw == NUBUS_DRHW_SONIC &&
ndev->dr_sw == NUBUS_DRSW_APPLE) {
/* There has to be a better way to do this... */
if (strstr(ndev->board->name, "DuoDock"))
return MACSONIC_DUODOCK;
else
return MACSONIC_APPLE;
}
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
if (ndev->dr_hw == NUBUS_DRHW_SMC9194 &&
ndev->dr_sw == NUBUS_DRSW_DAYNA)
return MACSONIC_DAYNA;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
NuBus header update Sync the nubus defines with the latest code in the mac68k repo. Some of these are needed for DP8390 driver update in the next patch. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 04:32:53 +08:00
if (ndev->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC &&
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
ndev->dr_sw == 0) { /* huh? */
return MACSONIC_APPLE16;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -1;
}
macsonic: move probe function to .devinit.text A pointer to mac_sonic_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. Various other functions that are called by mac_sonic_probe need to move to .devinit.text, too. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12 04:52:48 +08:00
static int __devinit mac_nubus_sonic_probe(struct net_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
static int slots;
struct nubus_dev* ndev = NULL;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
struct sonic_local* lp = netdev_priv(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned long base_addr, prom_addr;
u16 sonic_dcr;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
int id = -1;
int reg_offset, dma_bitmode;
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Find the first SONIC that hasn't been initialized already */
while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK,
NUBUS_TYPE_ETHERNET, ndev)) != NULL)
{
/* Have we seen it already? */
if (slots & (1<<ndev->board->slot))
continue;
slots |= 1<<ndev->board->slot;
/* Is it one of ours? */
if ((id = macsonic_ident(ndev)) != -1)
break;
}
if (ndev == NULL)
return -ENODEV;
switch (id) {
case MACSONIC_DUODOCK:
base_addr = ndev->board->slot_addr + DUODOCK_SONIC_REGISTERS;
prom_addr = ndev->board->slot_addr + DUODOCK_SONIC_PROM_BASE;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 |
SONIC_DCR_TFT0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
reg_offset = 2;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
dma_bitmode = SONIC_BITMODE32;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case MACSONIC_APPLE:
base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0;
reg_offset = 0;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
dma_bitmode = SONIC_BITMODE32;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case MACSONIC_APPLE16:
base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
SONIC_DCR_PO1 | SONIC_DCR_BMS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
reg_offset = 0;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
dma_bitmode = SONIC_BITMODE16;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case MACSONIC_DAYNALINK:
base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
prom_addr = ndev->board->slot_addr + DAYNALINK_PROM_BASE;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-14 01:24:59 +08:00
SONIC_DCR_PO1 | SONIC_DCR_BMS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
reg_offset = 0;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
dma_bitmode = SONIC_BITMODE16;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case MACSONIC_DAYNA:
base_addr = ndev->board->slot_addr + DAYNA_SONIC_REGISTERS;
prom_addr = ndev->board->slot_addr + DAYNA_SONIC_MAC_ADDR;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
sonic_dcr = SONIC_DCR_BMS |
SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
reg_offset = 0;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
dma_bitmode = SONIC_BITMODE16;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
default:
printk(KERN_ERR "macsonic: WTF, id is %d\n", id);
return -ENODEV;
}
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
/* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
* and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev->base_addr = base_addr;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
lp->reg_offset = reg_offset;
lp->dma_bitmode = dma_bitmode;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dev->irq = SLOT2IRQ(ndev->board->slot);
if (!sonic_version_printed) {
printk(KERN_INFO "%s", version);
sonic_version_printed = 1;
}
printk(KERN_INFO "%s: %s in slot %X\n",
net: struct device - replace bus_id with dev_name(), dev_set_name() Cc: davem@davemloft.net Cc: netdev@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-25 07:38:22 +08:00
dev_name(lp->device), ndev->board->name, ndev->board->slot);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
net: struct device - replace bus_id with dev_name(), dev_set_name() Cc: davem@davemloft.net Cc: netdev@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-25 07:38:22 +08:00
dev_name(lp->device), SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
net: struct device - replace bus_id with dev_name(), dev_set_name() Cc: davem@davemloft.net Cc: netdev@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-25 07:38:22 +08:00
printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Software reset, then initialize control registers. */
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0));
/* This *must* be written back to in order to restore the
* extended programmable output bits, since it may not have been
* initialised since the hardware reset. */
SONIC_WRITE(SONIC_DCR2, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Clear *and* disable interrupts to be on the safe side */
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
SONIC_WRITE(SONIC_IMR, 0);
SONIC_WRITE(SONIC_ISR, 0x7fff);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Now look for the MAC address. */
if (mac_nubus_sonic_ethernet_addr(dev, prom_addr, id) != 0)
return -ENODEV;
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
/* Shared init code */
return macsonic_init(dev);
}
macsonic: move probe function to .devinit.text A pointer to mac_sonic_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. Various other functions that are called by mac_sonic_probe need to move to .devinit.text, too. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12 04:52:48 +08:00
static int __devinit mac_sonic_probe(struct platform_device *pdev)
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
{
struct net_device *dev;
struct sonic_local *lp;
int err;
dev = alloc_etherdev(sizeof(struct sonic_local));
if (!dev)
return -ENOMEM;
lp = netdev_priv(dev);
SONIC: small fix and cleanup Fix a potential problem in the timeout handling: don't free the DMA buffers before resetting the chip. Also a trivial cleanup. Bring macsonic and jazzsonic into sync. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 04:33:02 +08:00
lp->device = &pdev->dev;
SET_NETDEV_DEV(dev, &pdev->dev);
macsonic, jazzsonic: fix oops on module unload Set the driver data before using it. Fixes an oops when doing rmmod. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-22 03:21:49 +08:00
platform_set_drvdata(pdev, dev);
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
/* This will catch fatal stuff like -ENOMEM as well as success */
err = mac_onboard_sonic_probe(dev);
if (err == 0)
goto found;
if (err != -ENODEV)
goto out;
err = mac_nubus_sonic_probe(dev);
if (err)
goto out;
found:
err = register_netdev(dev);
if (err)
goto out;
net: convert print_mac to %pM This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28 06:59:26 +08:00
printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
out:
free_netdev(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
return err;
}
MODULE_DESCRIPTION("Macintosh SONIC ethernet driver");
module_param(sonic_debug, int, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
MODULE_PARM_DESC(sonic_debug, "macsonic debug level (1-4)");
mac68k: move macsonic and macmace platform devices Move platform device code from the drivers to the platform init function. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-11-03 21:42:02 +08:00
MODULE_ALIAS("platform:macsonic");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
#include "sonic.c"
SONIC: small fix and cleanup Fix a potential problem in the timeout handling: don't free the DMA buffers before resetting the chip. Also a trivial cleanup. Bring macsonic and jazzsonic into sync. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 04:33:02 +08:00
static int __devexit mac_sonic_device_remove (struct platform_device *pdev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
SONIC: small fix and cleanup Fix a potential problem in the timeout handling: don't free the DMA buffers before resetting the chip. Also a trivial cleanup. Bring macsonic and jazzsonic into sync. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 04:33:02 +08:00
struct net_device *dev = platform_get_drvdata(pdev);
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
struct sonic_local* lp = netdev_priv(dev);
SONIC: small fix and cleanup Fix a potential problem in the timeout handling: don't free the DMA buffers before resetting the chip. Also a trivial cleanup. Bring macsonic and jazzsonic into sync. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 04:33:02 +08:00
unregister_netdev(dev);
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
lp->descriptors, lp->descriptors_laddr);
SONIC: small fix and cleanup Fix a potential problem in the timeout handling: don't free the DMA buffers before resetting the chip. Also a trivial cleanup. Bring macsonic and jazzsonic into sync. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 04:33:02 +08:00
free_netdev(dev);
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
[DRIVER MODEL] Convert platform drivers to use struct platform_driver This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10 06:32:44 +08:00
static struct platform_driver mac_sonic_driver = {
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
.probe = mac_sonic_probe,
.remove = __devexit_p(mac_sonic_device_remove),
[DRIVER MODEL] Convert platform drivers to use struct platform_driver This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10 06:32:44 +08:00
.driver = {
mac68k: move macsonic and macmace platform devices Move platform device code from the drivers to the platform init function. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-11-03 21:42:02 +08:00
.name = mac_sonic_string,
.owner = THIS_MODULE,
[DRIVER MODEL] Convert platform drivers to use struct platform_driver This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10 06:32:44 +08:00
},
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
};
static int __init mac_sonic_init_module(void)
{
mac68k: move macsonic and macmace platform devices Move platform device code from the drivers to the platform init function. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-11-03 21:42:02 +08:00
return platform_driver_register(&mac_sonic_driver);
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
}
static void __exit mac_sonic_cleanup_module(void)
{
[DRIVER MODEL] Convert platform drivers to use struct platform_driver This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10 06:32:44 +08:00
platform_driver_unregister(&mac_sonic_driver);
[PATCH] macsonic/jazzsonic network drivers update The purpose of this patch: - Adopt the DMA API (jazzsonic, macsonic & core driver). - Adopt the driver model (macsonic). This part was cribbed from jazzsonic. As a consequence, macsonic once again works as a module. Driver model is also used by the DMA calls. - Support 16 bit cards (macsonic & core driver, also affects jazzsonic) This code was adapted from the mac68k linux 2.2 kernel, where it has languished for a long time. - Support more 32-bit mac cards (macsonic) Also from mac68k repo. - Zero-copy buffer handling (core driver) Provides a nice performance improvement. The new algorithm incidentally helped to replace the old Jazz DMA code. The patch was tested on a variety of macs (several 32-bit quadra built-in NICs, a 16-bit LC PDS NIC and a 16-bit comm-slot NIC), and also on MIPS Jazz. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-20 13:53:22 +08:00
}
module_init(mac_sonic_init_module);
module_exit(mac_sonic_cleanup_module);
Reference in New Issue Copy Permalink