linux/drivers/net/ipa/gsi_reg.h

351 lines
9.8 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
* Copyright (C) 2018-2023 Linaro Ltd.
*/
#ifndef _GSI_REG_H_
#define _GSI_REG_H_
/* === Only "gsi.c" and "gsi_reg.c" should include this file === */
#include <linux/bits.h>
/**
* DOC: GSI Registers
*
* GSI registers are located within the "gsi" address space defined by Device
* Tree. The offset of each register within that space is specified by
* symbols defined below. The GSI address space is mapped to virtual memory
* space in gsi_init(). All GSI registers are 32 bits wide.
*
* Each register type is duplicated for a number of instances of something.
* For example, each GSI channel has its own set of registers defining its
* configuration. The offset to a channel's set of registers is computed
* based on a "base" offset plus an additional "stride" amount computed
* from the channel's ID. For such registers, the offset is computed by a
* function-like macro that takes a parameter used in the computation.
*
* The offset of a register dependent on execution environment is computed
* by a macro that is supplied a parameter "ee". The "ee" value is a member
* of the gsi_ee_id enumerated type.
*
* The offset of a channel register is computed by a macro that is supplied a
* parameter "ch". The "ch" value is a channel id whose maximum value is 30
* (though the actual limit is hardware-dependent).
*
* The offset of an event register is computed by a macro that is supplied a
* parameter "ev". The "ev" value is an event id whose maximum value is 15
* (though the actual limit is hardware-dependent).
*/
/* enum gsi_reg_id - GSI register IDs */
enum gsi_reg_id {
INTER_EE_SRC_CH_IRQ_MSK, /* IPA v3.5+ */
INTER_EE_SRC_EV_CH_IRQ_MSK, /* IPA v3.5+ */
CH_C_CNTXT_0,
CH_C_CNTXT_1,
CH_C_CNTXT_2,
CH_C_CNTXT_3,
CH_C_QOS,
CH_C_SCRATCH_0,
CH_C_SCRATCH_1,
CH_C_SCRATCH_2,
CH_C_SCRATCH_3,
EV_CH_E_CNTXT_0,
EV_CH_E_CNTXT_1,
EV_CH_E_CNTXT_2,
EV_CH_E_CNTXT_3,
EV_CH_E_CNTXT_4,
EV_CH_E_CNTXT_8,
EV_CH_E_CNTXT_9,
EV_CH_E_CNTXT_10,
EV_CH_E_CNTXT_11,
EV_CH_E_CNTXT_12,
EV_CH_E_CNTXT_13,
EV_CH_E_SCRATCH_0,
EV_CH_E_SCRATCH_1,
CH_C_DOORBELL_0,
EV_CH_E_DOORBELL_0,
GSI_STATUS,
CH_CMD,
EV_CH_CMD,
GENERIC_CMD,
HW_PARAM_2, /* IPA v3.5.1+ */
CNTXT_TYPE_IRQ,
CNTXT_TYPE_IRQ_MSK,
CNTXT_SRC_CH_IRQ,
CNTXT_SRC_CH_IRQ_MSK,
CNTXT_SRC_CH_IRQ_CLR,
CNTXT_SRC_EV_CH_IRQ,
CNTXT_SRC_EV_CH_IRQ_MSK,
CNTXT_SRC_EV_CH_IRQ_CLR,
CNTXT_SRC_IEOB_IRQ,
CNTXT_SRC_IEOB_IRQ_MSK,
CNTXT_SRC_IEOB_IRQ_CLR,
CNTXT_GLOB_IRQ_STTS,
CNTXT_GLOB_IRQ_EN,
CNTXT_GLOB_IRQ_CLR,
CNTXT_GSI_IRQ_STTS,
CNTXT_GSI_IRQ_EN,
CNTXT_GSI_IRQ_CLR,
CNTXT_INTSET,
ERROR_LOG,
ERROR_LOG_CLR,
CNTXT_SCRATCH_0,
GSI_REG_ID_COUNT, /* Last; not an ID */
};
/* CH_C_CNTXT_0 register */
enum gsi_reg_ch_c_cntxt_0_field_id {
CHTYPE_PROTOCOL,
CHTYPE_DIR,
CH_EE,
CHID,
CHTYPE_PROTOCOL_MSB, /* IPA v4.9+ */
ERINDEX,
CHSTATE,
ELEMENT_SIZE,
};
/** enum gsi_channel_type - CHTYPE_PROTOCOL field values in CH_C_CNTXT_0 */
enum gsi_channel_type {
GSI_CHANNEL_TYPE_MHI = 0x0,
GSI_CHANNEL_TYPE_XHCI = 0x1,
GSI_CHANNEL_TYPE_GPI = 0x2,
GSI_CHANNEL_TYPE_XDCI = 0x3,
GSI_CHANNEL_TYPE_WDI2 = 0x4,
GSI_CHANNEL_TYPE_GCI = 0x5,
GSI_CHANNEL_TYPE_WDI3 = 0x6,
GSI_CHANNEL_TYPE_MHIP = 0x7,
GSI_CHANNEL_TYPE_AQC = 0x8,
GSI_CHANNEL_TYPE_11AD = 0x9,
};
/* CH_C_CNTXT_1 register */
enum gsi_reg_ch_c_cntxt_1_field_id {
CH_R_LENGTH,
};
/* CH_C_QOS register */
enum gsi_reg_ch_c_qos_field_id {
WRR_WEIGHT,
MAX_PREFETCH,
USE_DB_ENG,
USE_ESCAPE_BUF_ONLY, /* IPA v4.0-4.2 */
PREFETCH_MODE, /* IPA v4.5+ */
EMPTY_LVL_THRSHOLD, /* IPA v4.5+ */
DB_IN_BYTES, /* IPA v4.9+ */
};
/** enum gsi_prefetch_mode - PREFETCH_MODE field in CH_C_QOS */
enum gsi_prefetch_mode {
USE_PREFETCH_BUFS = 0,
ESCAPE_BUF_ONLY = 1,
SMART_PREFETCH = 2,
FREE_PREFETCH = 3,
};
/* EV_CH_E_CNTXT_0 register */
enum gsi_reg_ch_c_ev_ch_e_cntxt_0_field_id {
EV_CHTYPE, /* enum gsi_channel_type */
EV_EE, /* enum gsi_ee_id; always GSI_EE_AP for us */
EV_EVCHID,
EV_INTYPE,
EV_CHSTATE,
EV_ELEMENT_SIZE,
};
/* EV_CH_E_CNTXT_8 register */
enum gsi_reg_ch_c_ev_ch_e_cntxt_8_field_id {
EV_MODT,
EV_MODC,
EV_MOD_CNT,
};
/* GSI_STATUS register */
#define ENABLED_FMASK GENMASK(0, 0)
/* CH_CMD register */
#define CH_CHID_FMASK GENMASK(7, 0)
#define CH_OPCODE_FMASK GENMASK(31, 24)
/** enum gsi_ch_cmd_opcode - CH_OPCODE field values in CH_CMD */
enum gsi_ch_cmd_opcode {
GSI_CH_ALLOCATE = 0x0,
GSI_CH_START = 0x1,
GSI_CH_STOP = 0x2,
GSI_CH_RESET = 0x9,
GSI_CH_DE_ALLOC = 0xa,
GSI_CH_DB_STOP = 0xb,
};
/* EV_CH_CMD register */
#define EV_CHID_FMASK GENMASK(7, 0)
#define EV_OPCODE_FMASK GENMASK(31, 24)
/** enum gsi_evt_cmd_opcode - EV_OPCODE field values in EV_CH_CMD */
enum gsi_evt_cmd_opcode {
GSI_EVT_ALLOCATE = 0x0,
GSI_EVT_RESET = 0x9,
GSI_EVT_DE_ALLOC = 0xa,
};
/* GENERIC_CMD register */
#define GENERIC_OPCODE_FMASK GENMASK(4, 0)
#define GENERIC_CHID_FMASK GENMASK(9, 5)
#define GENERIC_EE_FMASK GENMASK(13, 10)
net: ipa: support enhanced channel flow control IPA v4.2 introduced GSI channel flow control, used instead of IPA endpoint DELAY mode to prevent a TX channel from injecting packets into the IPA core. It used a new FLOW_CONTROLLED channel state which could be entered using GSI generic commands. IPA v4.11 extended the channel flow control model. Rather than having a distinct FLOW_CONTROLLED channel state, each channel has a "flow control" property that can be enabled or not--independent of the channel state. The AP (or modem) can modify this property using the same GSI generic commands as before. The AP only uses channel flow control on modem TX channels, and only when recovering from a modem crash. The AP has no way to discover the state of a modem channel, so the fact that (starting with IPA v4.11) flow control no longer uses a distinct channel state is invisible to the AP. So enhanced flow control generally does not change the way AP uses flow control. There are a few small differences, however: - There is a notion of "primary" or "secondary" flow control, and when enabling or disabling flow control that must be specified in a new field in the GSI generic command register. For now, we always specify 0 (meaning "primary"). - When disabling flow control, it's possible a request will need to be retried. We retry up to 5 times in this case. - Another new generic command allows the current flow control state to be queried. We do not use this. Other than the need for retries, the code essentially works the same way as before. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-25 03:44:16 +08:00
#define GENERIC_PARAMS_FMASK GENMASK(31, 24) /* IPA v4.11+ */
/** enum gsi_generic_cmd_opcode - GENERIC_OPCODE field values in GENERIC_CMD */
enum gsi_generic_cmd_opcode {
GSI_GENERIC_HALT_CHANNEL = 0x1,
GSI_GENERIC_ALLOCATE_CHANNEL = 0x2,
GSI_GENERIC_ENABLE_FLOW_CONTROL = 0x3, /* IPA v4.2+ */
GSI_GENERIC_DISABLE_FLOW_CONTROL = 0x4, /* IPA v4.2+ */
net: ipa: support enhanced channel flow control IPA v4.2 introduced GSI channel flow control, used instead of IPA endpoint DELAY mode to prevent a TX channel from injecting packets into the IPA core. It used a new FLOW_CONTROLLED channel state which could be entered using GSI generic commands. IPA v4.11 extended the channel flow control model. Rather than having a distinct FLOW_CONTROLLED channel state, each channel has a "flow control" property that can be enabled or not--independent of the channel state. The AP (or modem) can modify this property using the same GSI generic commands as before. The AP only uses channel flow control on modem TX channels, and only when recovering from a modem crash. The AP has no way to discover the state of a modem channel, so the fact that (starting with IPA v4.11) flow control no longer uses a distinct channel state is invisible to the AP. So enhanced flow control generally does not change the way AP uses flow control. There are a few small differences, however: - There is a notion of "primary" or "secondary" flow control, and when enabling or disabling flow control that must be specified in a new field in the GSI generic command register. For now, we always specify 0 (meaning "primary"). - When disabling flow control, it's possible a request will need to be retried. We retry up to 5 times in this case. - Another new generic command allows the current flow control state to be queried. We do not use this. Other than the need for retries, the code essentially works the same way as before. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-25 03:44:16 +08:00
GSI_GENERIC_QUERY_FLOW_CONTROL = 0x5, /* IPA v4.11+ */
};
/* HW_PARAM_2 register */ /* IPA v3.5.1+ */
#define IRAM_SIZE_FMASK GENMASK(2, 0)
#define NUM_CH_PER_EE_FMASK GENMASK(7, 3)
#define NUM_EV_PER_EE_FMASK GENMASK(12, 8)
#define GSI_CH_PEND_TRANSLATE_FMASK GENMASK(13, 13)
#define GSI_CH_FULL_LOGIC_FMASK GENMASK(14, 14)
/* Fields below are present for IPA v4.0 and above */
#define GSI_USE_SDMA_FMASK GENMASK(15, 15)
#define GSI_SDMA_N_INT_FMASK GENMASK(18, 16)
#define GSI_SDMA_MAX_BURST_FMASK GENMASK(26, 19)
#define GSI_SDMA_N_IOVEC_FMASK GENMASK(29, 27)
/* Fields below are present for IPA v4.2 and above */
#define GSI_USE_RD_WR_ENG_FMASK GENMASK(30, 30)
#define GSI_USE_INTER_EE_FMASK GENMASK(31, 31)
/** enum gsi_iram_size - IRAM_SIZE field values in HW_PARAM_2 */
enum gsi_iram_size {
IRAM_SIZE_ONE_KB = 0x0,
IRAM_SIZE_TWO_KB = 0x1,
/* The next two values are available for IPA v4.0 and above */
IRAM_SIZE_TWO_N_HALF_KB = 0x2,
IRAM_SIZE_THREE_KB = 0x3,
/* The next two values are available for IPA v4.5 and above */
IRAM_SIZE_THREE_N_HALF_KB = 0x4,
IRAM_SIZE_FOUR_KB = 0x5,
};
/**
* enum gsi_irq_type_id: GSI IRQ types
* @GSI_CH_CTRL: Channel allocation, deallocation, etc.
* @GSI_EV_CTRL: Event ring allocation, deallocation, etc.
* @GSI_GLOB_EE: Global/general event
* @GSI_IEOB: Transfer (TRE) completion
* @GSI_INTER_EE_CH_CTRL: Remote-issued stop/reset (unused)
* @GSI_INTER_EE_EV_CTRL: Remote-issued event reset (unused)
* @GSI_GENERAL: General hardware event (bus error, etc.)
*/
enum gsi_irq_type_id {
GSI_CH_CTRL = BIT(0),
GSI_EV_CTRL = BIT(1),
GSI_GLOB_EE = BIT(2),
GSI_IEOB = BIT(3),
GSI_INTER_EE_CH_CTRL = BIT(4),
GSI_INTER_EE_EV_CTRL = BIT(5),
GSI_GENERAL = BIT(6),
/* IRQ types 7-31 (and their bit values) are reserved */
};
/** enum gsi_global_irq_id: Global GSI interrupt events */
enum gsi_global_irq_id {
ERROR_INT = BIT(0),
GP_INT1 = BIT(1),
GP_INT2 = BIT(2),
GP_INT3 = BIT(3),
/* Global IRQ types 4-31 (and their bit values) are reserved */
};
/** enum gsi_general_irq_id: GSI general IRQ conditions */
enum gsi_general_irq_id {
BREAK_POINT = BIT(0),
BUS_ERROR = BIT(1),
CMD_FIFO_OVRFLOW = BIT(2),
MCS_STACK_OVRFLOW = BIT(3),
/* General IRQ types 4-31 (and their bit values) are reserved */
};
/* CNTXT_INTSET register */
#define INTYPE_FMASK GENMASK(0, 0)
/* ERROR_LOG register */
#define ERR_ARG3_FMASK GENMASK(3, 0)
#define ERR_ARG2_FMASK GENMASK(7, 4)
#define ERR_ARG1_FMASK GENMASK(11, 8)
#define ERR_CODE_FMASK GENMASK(15, 12)
#define ERR_VIRT_IDX_FMASK GENMASK(23, 19)
#define ERR_TYPE_FMASK GENMASK(27, 24)
#define ERR_EE_FMASK GENMASK(31, 28)
/** enum gsi_err_code - ERR_CODE field values in EE_ERR_LOG */
enum gsi_err_code {
GSI_INVALID_TRE = 0x1,
GSI_OUT_OF_BUFFERS = 0x2,
GSI_OUT_OF_RESOURCES = 0x3,
GSI_UNSUPPORTED_INTER_EE_OP = 0x4,
GSI_EVT_RING_EMPTY = 0x5,
GSI_NON_ALLOCATED_EVT_ACCESS = 0x6,
/* 7 is not assigned */
GSI_HWO_1 = 0x8,
};
/** enum gsi_err_type - ERR_TYPE field values in EE_ERR_LOG */
enum gsi_err_type {
GSI_ERR_TYPE_GLOB = 0x1,
GSI_ERR_TYPE_CHAN = 0x2,
GSI_ERR_TYPE_EVT = 0x3,
};
/* CNTXT_SCRATCH_0 register */
#define INTER_EE_RESULT_FMASK GENMASK(2, 0)
#define GENERIC_EE_RESULT_FMASK GENMASK(7, 5)
/** enum gsi_generic_ee_result - GENERIC_EE_RESULT field values in SCRATCH_0 */
enum gsi_generic_ee_result {
GENERIC_EE_SUCCESS = 0x1,
GENERIC_EE_INCORRECT_CHANNEL_STATE = 0x2,
GENERIC_EE_INCORRECT_DIRECTION = 0x3,
GENERIC_EE_INCORRECT_CHANNEL_TYPE = 0x4,
GENERIC_EE_INCORRECT_CHANNEL = 0x5,
GENERIC_EE_RETRY = 0x6,
GENERIC_EE_NO_RESOURCES = 0x7,
};
extern const struct regs gsi_regs_v3_1;
extern const struct regs gsi_regs_v3_5_1;
extern const struct regs gsi_regs_v4_0;
extern const struct regs gsi_regs_v4_5;
extern const struct regs gsi_regs_v4_9;
/**
* gsi_reg() - Return the structure describing a GSI register
* @gsi: GSI pointer
* @reg_id: GSI register ID
*/
const struct reg *gsi_reg(struct gsi *gsi, enum gsi_reg_id reg_id);
/**
* gsi_reg_init() - Perform GSI register initialization
* @gsi: GSI pointer
* @pdev: GSI (IPA) platform device
*
* Initialize GSI registers, including looking up and I/O mapping
* the "gsi" memory space. This function sets gsi->virt_raw and
* gsi->virt.
*/
int gsi_reg_init(struct gsi *gsi, struct platform_device *pdev);
/**
* gsi_reg_exit() - Inverse of gsi_reg_init()
* @gsi: GSI pointer
*/
void gsi_reg_exit(struct gsi *gsi);
#endif /* _GSI_REG_H_ */