korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2025-01-10 15:54:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
eda081d2ef
linux/arch/arm64/kvm/fpsimd.c

217 lines
6.3 KiB
C
Raw Normal View History

KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* arch/arm64/kvm/fpsimd.c: Guest/host FPSIMD context coordination helpers
*
* Copyright 2018 Arm Limited
* Author: Dave Martin <Dave.Martin@arm.com>
*/
KVM: arm64: Don't mask softirq with IRQs disabled in vcpu_put() Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") introduces a specific helper kvm_arch_vcpu_put_fp() for saving the vcpu FPSIMD state during vcpu_put(). This function uses local_bh_disable()/_enable() to protect the FPSIMD context manipulation from interruption by softirqs. This approach is not correct, because vcpu_put() can be invoked either from the KVM host vcpu thread (when exiting the vcpu run loop), or via a preempt notifier. In the former case, only preemption is disabled. In the latter case, the function is called from inside __schedule(), which means that IRQs are disabled. Use of local_bh_disable()/_enable() with IRQs disabled is considerd an error, resulting in lockdep splats while running VMs if lockdep is enabled. This patch disables IRQs instead of attempting to disable softirqs, avoiding the problem of calling local_bh_enable() with IRQs disabled in the __schedule() path. This creates an additional interrupt blackout during vcpu run loop exit, but this is the rare case and the blackout latency is still less than that of __schedule(). Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-06-15 23:47:24 +08:00
#include <linux/irqflags.h>
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
#include <linux/sched.h>
#include <linux/kvm_host.h>
arm64/sve: Enable SVE state tracking for non-task contexts The current FPSIMD/SVE context handling support for non-task (i.e., KVM vcpu) contexts does not take SVE into account. This means that only task contexts can safely use SVE at present. In preparation for enabling KVM guests to use SVE, it is necessary to keep track of SVE state for non-task contexts too. This patch adds the necessary support, removing assumptions from the context switch code about the location of the SVE context storage. When binding a vcpu context, its vector length is arbitrarily specified as SVE_VL_MIN for now. In any case, because TIF_SVE is presently cleared at vcpu context bind time, the specified vector length will not be used for anything yet. In later patches TIF_SVE will be set here as appropriate, and the appropriate maximum vector length for the vcpu will be passed when binding. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-09-28 21:39:11 +08:00
#include <asm/fpsimd.h>
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
#include <asm/kvm_asm.h>
KVM: arm64: Use {read,write}_sysreg_el1 to access ZCR_EL1 Switch to the unified EL1 accessors for ZCR_EL1, which will make things easier for nVHE support. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-03-11 21:51:44 +08:00
#include <asm/kvm_hyp.h>
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
#include <asm/kvm_mmu.h>
KVM: arm64/sve: Fix SVE trap restoration for non-current tasks Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") attempts to restore the configuration of userspace SVE trapping via a call to fpsimd_bind_task_to_cpu(), but the logic for determining when to do this is not correct. The patch makes the errnoenous assumption that the only task that may try to enter userspace with the currently loaded FPSIMD/SVE register content is current. This may not be the case however: if some other user task T is scheduled on the CPU during the execution of the KVM run loop, and the vcpu does not try to use the registers in the meantime, then T's state may be left there intact. If T happens to be the next task to enter userspace on this CPU then the hooks for reloading the register state and configuring traps will be skipped. (Also, current never has SVE state at this point anyway and should always have the trap enabled, as a side-effect of the ioctl() syscall needed to reach the KVM run loop in the first place.) This patch instead restores the state of the EL0 trap from the state observed at the most recent vcpu_load(), ensuring that the trap is set correctly for the loaded context (if any). Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-06-15 23:47:25 +08:00
#include <asm/sysreg.h>
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
KVM: arm64: pkvm: Unshare guest structs during teardown Make use of the newly introduced unshare hypercall during guest teardown to unmap guest-related data structures from the hyp stage-1. Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-15-qperret@google.com
2021-12-16 00:12:31 +08:00
void kvm_vcpu_unshare_task_fp(struct kvm_vcpu *vcpu)
{
struct task_struct *p = vcpu->arch.parent_task;
struct user_fpsimd_state *fpsimd;
if (!is_protected_kvm_enabled() || !p)
return;
fpsimd = &p->thread.uw.fpsimd_state;
kvm_unshare_hyp(fpsimd, fpsimd + 1);
put_task_struct(p);
}
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
/*
* Called on entry to KVM_RUN unless this vcpu previously ran at least
* once and the most recent prior KVM_RUN for this vcpu was called from
* the same task as current (highly likely).
*
* This is guaranteed to execute before kvm_arch_vcpu_load_fp(vcpu),
* such that on entering hyp the relevant parts of current are already
* mapped.
*/
int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu)
{
int ret;
struct user_fpsimd_state *fpsimd = &current->thread.uw.fpsimd_state;
KVM: arm64: pkvm: Unshare guest structs during teardown Make use of the newly introduced unshare hypercall during guest teardown to unmap guest-related data structures from the hyp stage-1. Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-15-qperret@google.com
2021-12-16 00:12:31 +08:00
kvm_vcpu_unshare_task_fp(vcpu);
KVM: arm64: Stop mapping current thread_info at EL2 Now that we can track an equivalent of TIF_FOREIGN_FPSTATE, drop the mapping of current's thread_info at EL2. Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-21 21:18:00 +08:00
/* Make sure the host task fpsimd state is visible to hyp: */
KVM: arm64: Introduce kvm_share_hyp() The create_hyp_mappings() function can currently be called at any point in time. However, its behaviour in protected mode changes widely depending on when it is being called. Prior to KVM init, it is used to create the temporary page-table used to bring-up the hypervisor, and later on it is transparently turned into a 'share' hypercall when the kernel has lost control over the hypervisor stage-1. In order to prepare the ground for also unsharing pages with the hypervisor during guest teardown, introduce a kvm_share_hyp() function to make it clear in which places a share hypercall should be expected, as we will soon need a matching unshare hypercall in all those places. Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-7-qperret@google.com
2021-12-16 00:12:23 +08:00
ret = kvm_share_hyp(fpsimd, fpsimd + 1);
KVM: arm64: pkvm: Unshare guest structs during teardown Make use of the newly introduced unshare hypercall during guest teardown to unmap guest-related data structures from the hyp stage-1. Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-15-qperret@google.com
2021-12-16 00:12:31 +08:00
if (ret)
return ret;
vcpu->arch.host_fpsimd_state = kern_hyp_va(fpsimd);
/*
* We need to keep current's task_struct pinned until its data has been
* unshared with the hypervisor to make sure it is not re-used by the
* kernel and donated to someone else while already shared -- see
* kvm_vcpu_unshare_task_fp() for the matching put_task_struct().
*/
if (is_protected_kvm_enabled()) {
get_task_struct(current);
vcpu->arch.parent_task = current;
}
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
KVM: arm64: pkvm: Unshare guest structs during teardown Make use of the newly introduced unshare hypercall during guest teardown to unmap guest-related data structures from the hyp stage-1. Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-15-qperret@google.com
2021-12-16 00:12:31 +08:00
return 0;
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
}
/*
* Prepare vcpu for saving the host's FPSIMD state and loading the guest's.
* The actual loading is done by the FPSIMD access trap taken to hyp.
*
* Here, we just set the correct metadata to indicate that the FPSIMD
* state in the cpu regs (if any) belongs to current on the host.
*/
void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
{
BUG_ON(!current->mm);
KVM: arm64: Move the handling of !FP outside of the fast path We currently start by assuming that the host owns the FP unit at load time, then check again whether this is the case as we are about to run. Only at this point do we account for the fact that there is a (vanishingly small) chance that we're running on a system without a FPSIMD unit (yes, this is madness). We can actually move this FPSIMD check as early as load-time, and drop the check at run time. No intended change in behaviour. Suggested-by: Reiji Watanabe <reijiw@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-06-08 21:22:31 +08:00
if (!system_supports_fpsimd())
return;
KVM: arm64: Discard any SVE state when entering KVM guests Since 8383741ab2e773a99 (KVM: arm64: Get rid of host SVE tracking/saving) KVM has not tracked the host SVE state, relying on the fact that we currently disable SVE whenever we perform a syscall. This may not be true in future since performance optimisation may result in us keeping SVE enabled in order to avoid needing to take access traps to reenable it. Handle this by clearing TIF_SVE and converting the stored task state to FPSIMD format when preparing to run the guest. This is done with a new call fpsimd_kvm_prepare() to keep the direct state manipulation functions internal to fpsimd.c. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-2-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-11-15 17:46:33 +08:00
fpsimd_kvm_prepare();
KVM: arm64: Move FP state ownership from flag to a tristate The KVM FP code uses a pair of flags to denote three states: - FP_ENABLED set: the guest owns the FP state - FP_HOST set: the host owns the FP state - FP_ENABLED and FP_HOST clear: nobody owns the FP state at all and both flags set is an illegal state, which nothing ever checks for... As it turns out, this isn't really a good match for flags, and we'd be better off if this was a simpler tristate, each state having a name that actually reflect the state: - FP_STATE_FREE - FP_STATE_HOST_OWNED - FP_STATE_GUEST_OWNED Kill the two flags, and move over to an enum encoding these three states. This results in less confusing code, and less risk of ending up in the uncharted territory of a 4th state if we forget to clear one of the two flags. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Reiji Watanabe <reijiw@google.com>
2022-05-28 19:38:14 +08:00
vcpu->arch.fp_state = FP_STATE_HOST_OWNED;
KVM: arm64/sve: Fix SVE trap restoration for non-current tasks Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") attempts to restore the configuration of userspace SVE trapping via a call to fpsimd_bind_task_to_cpu(), but the logic for determining when to do this is not correct. The patch makes the errnoenous assumption that the only task that may try to enter userspace with the currently loaded FPSIMD/SVE register content is current. This may not be the case however: if some other user task T is scheduled on the CPU during the execution of the KVM run loop, and the vcpu does not try to use the registers in the meantime, then T's state may be left there intact. If T happens to be the next task to enter userspace on this CPU then the hooks for reloading the register state and configuring traps will be skipped. (Also, current never has SVE state at this point anyway and should always have the trap enabled, as a side-effect of the ioctl() syscall needed to reach the KVM run loop in the first place.) This patch instead restores the state of the EL0 trap from the state observed at the most recent vcpu_load(), ensuring that the trap is set correctly for the loaded context (if any). Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-06-15 23:47:25 +08:00
KVM: arm64: Move vcpu SVE/SME flags to the state flag set The two HOST_{SVE,SME}_ENABLED are only used for the host kernel to track its own state across a vcpu run so that it can be fully restored. Move these flags to the so called state set. Reviewed-by: Fuad Tabba <tabba@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-28 19:38:20 +08:00
vcpu_clear_flag(vcpu, HOST_SVE_ENABLED);
KVM: arm64/sve: Fix SVE trap restoration for non-current tasks Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") attempts to restore the configuration of userspace SVE trapping via a call to fpsimd_bind_task_to_cpu(), but the logic for determining when to do this is not correct. The patch makes the errnoenous assumption that the only task that may try to enter userspace with the currently loaded FPSIMD/SVE register content is current. This may not be the case however: if some other user task T is scheduled on the CPU during the execution of the KVM run loop, and the vcpu does not try to use the registers in the meantime, then T's state may be left there intact. If T happens to be the next task to enter userspace on this CPU then the hooks for reloading the register state and configuring traps will be skipped. (Also, current never has SVE state at this point anyway and should always have the trap enabled, as a side-effect of the ioctl() syscall needed to reach the KVM run loop in the first place.) This patch instead restores the state of the EL0 trap from the state observed at the most recent vcpu_load(), ensuring that the trap is set correctly for the loaded context (if any). Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-06-15 23:47:25 +08:00
if (read_sysreg(cpacr_el1) & CPACR_EL1_ZEN_EL0EN)
KVM: arm64: Move vcpu SVE/SME flags to the state flag set The two HOST_{SVE,SME}_ENABLED are only used for the host kernel to track its own state across a vcpu run so that it can be fully restored. Move these flags to the so called state set. Reviewed-by: Fuad Tabba <tabba@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-28 19:38:20 +08:00
vcpu_set_flag(vcpu, HOST_SVE_ENABLED);
KVM: arm64: Handle SME host state when running guests While we don't currently support SME in guests we do currently support it for the host system so we need to take care of SME's impact, including the floating point register state, when running guests. Simiarly to SVE we need to manage the traps in CPACR_RL1, what is new is the handling of streaming mode and ZA. Normally we defer any handling of the floating point register state until the guest first uses it however if the system is in streaming mode FPSIMD and SVE operations may generate SME traps which we would need to distinguish from actual attempts by the guest to use SME. Rather than do this for the time being if we are in streaming mode when entering the guest we force the floating point state to be saved immediately and exit streaming mode, meaning that the guest won't generate SME traps for supported operations. We could handle ZA in the access trap similarly to the FPSIMD/SVE state without the disruption caused by streaming mode but for simplicity handle it the same way as streaming mode for now. This will be revisited when we support SME for guests (hopefully before SME hardware becomes available), for now it will only incur additional cost on systems with SME and even there only if streaming mode or ZA are enabled. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220419112247.711548-27-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-04-19 19:22:34 +08:00
/*
* We don't currently support SME guests but if we leave
* things in streaming mode then when the guest starts running
* FPSIMD or SVE code it may generate SME traps so as a
* special case if we are in streaming mode we force the host
* state to be saved now and exit streaming mode so that we
* don't have to handle any SME traps for valid guest
* operations. Do this for ZA as well for now for simplicity.
*/
if (system_supports_sme()) {
KVM: arm64: Move vcpu SVE/SME flags to the state flag set The two HOST_{SVE,SME}_ENABLED are only used for the host kernel to track its own state across a vcpu run so that it can be fully restored. Move these flags to the so called state set. Reviewed-by: Fuad Tabba <tabba@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-28 19:38:20 +08:00
vcpu_clear_flag(vcpu, HOST_SME_ENABLED);
KVM: arm64: Handle SME host state when running guests While we don't currently support SME in guests we do currently support it for the host system so we need to take care of SME's impact, including the floating point register state, when running guests. Simiarly to SVE we need to manage the traps in CPACR_RL1, what is new is the handling of streaming mode and ZA. Normally we defer any handling of the floating point register state until the guest first uses it however if the system is in streaming mode FPSIMD and SVE operations may generate SME traps which we would need to distinguish from actual attempts by the guest to use SME. Rather than do this for the time being if we are in streaming mode when entering the guest we force the floating point state to be saved immediately and exit streaming mode, meaning that the guest won't generate SME traps for supported operations. We could handle ZA in the access trap similarly to the FPSIMD/SVE state without the disruption caused by streaming mode but for simplicity handle it the same way as streaming mode for now. This will be revisited when we support SME for guests (hopefully before SME hardware becomes available), for now it will only incur additional cost on systems with SME and even there only if streaming mode or ZA are enabled. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220419112247.711548-27-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-04-19 19:22:34 +08:00
if (read_sysreg(cpacr_el1) & CPACR_EL1_SMEN_EL0EN)
KVM: arm64: Move vcpu SVE/SME flags to the state flag set The two HOST_{SVE,SME}_ENABLED are only used for the host kernel to track its own state across a vcpu run so that it can be fully restored. Move these flags to the so called state set. Reviewed-by: Fuad Tabba <tabba@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-28 19:38:20 +08:00
vcpu_set_flag(vcpu, HOST_SME_ENABLED);
KVM: arm64: Handle SME host state when running guests While we don't currently support SME in guests we do currently support it for the host system so we need to take care of SME's impact, including the floating point register state, when running guests. Simiarly to SVE we need to manage the traps in CPACR_RL1, what is new is the handling of streaming mode and ZA. Normally we defer any handling of the floating point register state until the guest first uses it however if the system is in streaming mode FPSIMD and SVE operations may generate SME traps which we would need to distinguish from actual attempts by the guest to use SME. Rather than do this for the time being if we are in streaming mode when entering the guest we force the floating point state to be saved immediately and exit streaming mode, meaning that the guest won't generate SME traps for supported operations. We could handle ZA in the access trap similarly to the FPSIMD/SVE state without the disruption caused by streaming mode but for simplicity handle it the same way as streaming mode for now. This will be revisited when we support SME for guests (hopefully before SME hardware becomes available), for now it will only incur additional cost on systems with SME and even there only if streaming mode or ZA are enabled. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220419112247.711548-27-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-04-19 19:22:34 +08:00
KVM: arm64: Move FP state ownership from flag to a tristate The KVM FP code uses a pair of flags to denote three states: - FP_ENABLED set: the guest owns the FP state - FP_HOST set: the host owns the FP state - FP_ENABLED and FP_HOST clear: nobody owns the FP state at all and both flags set is an illegal state, which nothing ever checks for... As it turns out, this isn't really a good match for flags, and we'd be better off if this was a simpler tristate, each state having a name that actually reflect the state: - FP_STATE_FREE - FP_STATE_HOST_OWNED - FP_STATE_GUEST_OWNED Kill the two flags, and move over to an enum encoding these three states. This results in less confusing code, and less risk of ending up in the uncharted territory of a 4th state if we forget to clear one of the two flags. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Reiji Watanabe <reijiw@google.com>
2022-05-28 19:38:14 +08:00
if (read_sysreg_s(SYS_SVCR) & (SVCR_SM_MASK | SVCR_ZA_MASK)) {
vcpu->arch.fp_state = FP_STATE_FREE;
KVM: arm64: Handle SME host state when running guests While we don't currently support SME in guests we do currently support it for the host system so we need to take care of SME's impact, including the floating point register state, when running guests. Simiarly to SVE we need to manage the traps in CPACR_RL1, what is new is the handling of streaming mode and ZA. Normally we defer any handling of the floating point register state until the guest first uses it however if the system is in streaming mode FPSIMD and SVE operations may generate SME traps which we would need to distinguish from actual attempts by the guest to use SME. Rather than do this for the time being if we are in streaming mode when entering the guest we force the floating point state to be saved immediately and exit streaming mode, meaning that the guest won't generate SME traps for supported operations. We could handle ZA in the access trap similarly to the FPSIMD/SVE state without the disruption caused by streaming mode but for simplicity handle it the same way as streaming mode for now. This will be revisited when we support SME for guests (hopefully before SME hardware becomes available), for now it will only incur additional cost on systems with SME and even there only if streaming mode or ZA are enabled. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220419112247.711548-27-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-04-19 19:22:34 +08:00
fpsimd_save_and_flush_cpu_state();
}
}
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
}
KVM: arm64: Add comments for context flush and sync callbacks Add a little bit of information on where _ctxflush_fp() and _ctxsync_fp() are called to help people unfamiliar with the code get up to speed. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220124155720.3943374-2-broonie@kernel.org
2022-01-24 23:57:19 +08:00
/*
KVM: arm64: Drop FP_FOREIGN_STATE from the hypervisor code The vcpu KVM_ARM64_FP_FOREIGN_FPSTATE flag tracks the thread's own TIF_FOREIGN_FPSTATE so that we can evaluate just before running the vcpu whether it the FP regs contain something that is owned by the vcpu or not by updating the rest of the FP flags. We do this in the hypervisor code in order to make sure we're in a context where we are not interruptible. But we already have a hook in the run loop to generate this flag. We may as well update the FP flags directly and save the pointless flag tracking. Whilst we're at it, rename update_fp_enabled() to guest_owns_fp_regs() to indicate what the leftover of this helper actually do. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Reiji Watanabe <reijiw@google.com> Reviewed-by: Mark Brown <broonie@kernel.org>
2022-05-28 19:38:13 +08:00
* Called just before entering the guest once we are no longer preemptable
* and interrupts are disabled. If we have managed to run anything using
* FP while we were preemptible (such as off the back of an interrupt),
* then neither the host nor the guest own the FP hardware (and it was the
* responsibility of the code that used FP to save the existing state).
KVM: arm64: Add comments for context flush and sync callbacks Add a little bit of information on where _ctxflush_fp() and _ctxsync_fp() are called to help people unfamiliar with the code get up to speed. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220124155720.3943374-2-broonie@kernel.org
2022-01-24 23:57:19 +08:00
*/
KVM: arm64: Introduce flag shadowing TIF_FOREIGN_FPSTATE We currently have to maintain a mapping the thread_info structure at EL2 in order to be able to check the TIF_FOREIGN_FPSTATE flag. In order to eventually get rid of this, start with a vcpu flag that shadows the thread flag on each entry into the hypervisor. Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-21 21:10:35 +08:00
void kvm_arch_vcpu_ctxflush_fp(struct kvm_vcpu *vcpu)
{
KVM: arm64: Move the handling of !FP outside of the fast path We currently start by assuming that the host owns the FP unit at load time, then check again whether this is the case as we are about to run. Only at this point do we account for the fact that there is a (vanishingly small) chance that we're running on a system without a FPSIMD unit (yes, this is madness). We can actually move this FPSIMD check as early as load-time, and drop the check at run time. No intended change in behaviour. Suggested-by: Reiji Watanabe <reijiw@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-06-08 21:22:31 +08:00
if (test_thread_flag(TIF_FOREIGN_FPSTATE))
KVM: arm64: Move FP state ownership from flag to a tristate The KVM FP code uses a pair of flags to denote three states: - FP_ENABLED set: the guest owns the FP state - FP_HOST set: the host owns the FP state - FP_ENABLED and FP_HOST clear: nobody owns the FP state at all and both flags set is an illegal state, which nothing ever checks for... As it turns out, this isn't really a good match for flags, and we'd be better off if this was a simpler tristate, each state having a name that actually reflect the state: - FP_STATE_FREE - FP_STATE_HOST_OWNED - FP_STATE_GUEST_OWNED Kill the two flags, and move over to an enum encoding these three states. This results in less confusing code, and less risk of ending up in the uncharted territory of a 4th state if we forget to clear one of the two flags. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Reiji Watanabe <reijiw@google.com>
2022-05-28 19:38:14 +08:00
vcpu->arch.fp_state = FP_STATE_FREE;
KVM: arm64: Introduce flag shadowing TIF_FOREIGN_FPSTATE We currently have to maintain a mapping the thread_info structure at EL2 in order to be able to check the TIF_FOREIGN_FPSTATE flag. In order to eventually get rid of this, start with a vcpu flag that shadows the thread flag on each entry into the hypervisor. Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-21 21:10:35 +08:00
}
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
/*
KVM: arm64: Add comments for context flush and sync callbacks Add a little bit of information on where _ctxflush_fp() and _ctxsync_fp() are called to help people unfamiliar with the code get up to speed. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220124155720.3943374-2-broonie@kernel.org
2022-01-24 23:57:19 +08:00
* Called just after exiting the guest. If the guest FPSIMD state
* was loaded, update the host's context tracking data mark the CPU
* FPSIMD regs as dirty and belonging to vcpu so that they will be
* written back if the kernel clobbers them due to kernel-mode NEON
* before re-entry into the guest.
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
*/
void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu)
{
arm64/fp: Use a struct to pass data to fpsimd_bind_state_to_cpu() For reasons that are unclear to this reader fpsimd_bind_state_to_cpu() populates the struct fpsimd_last_state_struct that it uses to store the active floating point state for KVM guests by passing an argument for each member of the structure. As the richness of the architecture increases this is resulting in a function with a rather large number of arguments which isn't ideal. Simplify the interface by using the struct directly as the single argument for the function, renaming it as we lift the definition into the header. This could be built on further to reduce the work we do adding storage for new FP state in various places but for now it just simplifies this one interface. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-9-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-11-15 17:46:40 +08:00
struct cpu_fp_state fp_state;
arm64/fpsimd: Have KVM explicitly say which FP registers to save In order to avoid needlessly saving and restoring the guest registers KVM relies on the host FPSMID code to save the guest registers when we context switch away from the guest. This is done by binding the KVM guest state to the CPU on top of the task state that was originally there, then carefully managing the TIF_SVE flag for the task to cause the host to save the full SVE state when needed regardless of the needs of the host task. This works well enough but isn't terribly direct about what is going on and makes it much more complicated to try to optimise what we're doing with the SVE register state. Let's instead have KVM pass in the register state it wants saving when it binds to the CPU. We introduce a new FP_STATE_CURRENT for use during normal task binding to indicate that we should base our decisions on the current task. This should not be used when actually saving. Ideally we might want to use a separate enum for the type to save but this enum and the enum values would then need to be named which has problems with clarity and ambiguity. In order to ease any future debugging that might be required this patch does not actually update any of the decision making about what to save, it merely starts tracking the new information and warns if the requested state is not what we would otherwise have decided to save. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-4-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-11-15 17:46:35 +08:00
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
WARN_ON_ONCE(!irqs_disabled());
KVM: arm64: Move FP state ownership from flag to a tristate The KVM FP code uses a pair of flags to denote three states: - FP_ENABLED set: the guest owns the FP state - FP_HOST set: the host owns the FP state - FP_ENABLED and FP_HOST clear: nobody owns the FP state at all and both flags set is an illegal state, which nothing ever checks for... As it turns out, this isn't really a good match for flags, and we'd be better off if this was a simpler tristate, each state having a name that actually reflect the state: - FP_STATE_FREE - FP_STATE_HOST_OWNED - FP_STATE_GUEST_OWNED Kill the two flags, and move over to an enum encoding these three states. This results in less confusing code, and less risk of ending up in the uncharted territory of a 4th state if we forget to clear one of the two flags. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Reiji Watanabe <reijiw@google.com>
2022-05-28 19:38:14 +08:00
if (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED) {
arm64/fpsimd: Have KVM explicitly say which FP registers to save In order to avoid needlessly saving and restoring the guest registers KVM relies on the host FPSMID code to save the guest registers when we context switch away from the guest. This is done by binding the KVM guest state to the CPU on top of the task state that was originally there, then carefully managing the TIF_SVE flag for the task to cause the host to save the full SVE state when needed regardless of the needs of the host task. This works well enough but isn't terribly direct about what is going on and makes it much more complicated to try to optimise what we're doing with the SVE register state. Let's instead have KVM pass in the register state it wants saving when it binds to the CPU. We introduce a new FP_STATE_CURRENT for use during normal task binding to indicate that we should base our decisions on the current task. This should not be used when actually saving. Ideally we might want to use a separate enum for the type to save but this enum and the enum values would then need to be named which has problems with clarity and ambiguity. In order to ease any future debugging that might be required this patch does not actually update any of the decision making about what to save, it merely starts tracking the new information and warns if the requested state is not what we would otherwise have decided to save. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-4-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-11-15 17:46:35 +08:00
arm64/sme: Implement SVCR context switching In SME the use of both streaming SVE mode and ZA are tracked through PSTATE.SM and PSTATE.ZA, visible through the system register SVCR. In order to context switch the floating point state for SME we need to context switch the contents of this register as part of context switching the floating point state. Since changing the vector length exits streaming SVE mode and disables ZA we also make sure we update SVCR appropriately when setting vector length, and similarly ensure that new threads have streaming SVE mode and ZA disabled. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220419112247.711548-14-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-04-19 19:22:21 +08:00
/*
* Currently we do not support SME guests so SVCR is
* always 0 and we just need a variable to point to.
*/
arm64/fp: Use a struct to pass data to fpsimd_bind_state_to_cpu() For reasons that are unclear to this reader fpsimd_bind_state_to_cpu() populates the struct fpsimd_last_state_struct that it uses to store the active floating point state for KVM guests by passing an argument for each member of the structure. As the richness of the architecture increases this is resulting in a function with a rather large number of arguments which isn't ideal. Simplify the interface by using the struct directly as the single argument for the function, renaming it as we lift the definition into the header. This could be built on further to reduce the work we do adding storage for new FP state in various places but for now it just simplifies this one interface. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-9-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-11-15 17:46:40 +08:00
fp_state.st = &vcpu->arch.ctxt.fp_regs;
fp_state.sve_state = vcpu->arch.sve_state;
fp_state.sve_vl = vcpu->arch.sve_max_vl;
arm64/sme: Rename za_state to sme_state In preparation for adding support for storage for ZT0 to the thread_struct rename za_state to sme_state. Since ZT0 is accessible when PSTATE.ZA is set just like ZA itself we will extend the allocation done for ZA to cover it, avoiding the need to further expand task_struct for non-SME tasks. No functional changes. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-1-f2fa0aef982f@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-01-17 00:04:36 +08:00
fp_state.sme_state = NULL;
arm64/fp: Use a struct to pass data to fpsimd_bind_state_to_cpu() For reasons that are unclear to this reader fpsimd_bind_state_to_cpu() populates the struct fpsimd_last_state_struct that it uses to store the active floating point state for KVM guests by passing an argument for each member of the structure. As the richness of the architecture increases this is resulting in a function with a rather large number of arguments which isn't ideal. Simplify the interface by using the struct directly as the single argument for the function, renaming it as we lift the definition into the header. This could be built on further to reduce the work we do adding storage for new FP state in various places but for now it just simplifies this one interface. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-9-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-11-15 17:46:40 +08:00
fp_state.svcr = &vcpu->arch.svcr;
fp_state.fp_type = &vcpu->arch.fp_type;
if (vcpu_has_sve(vcpu))
fp_state.to_save = FP_STATE_SVE;
else
fp_state.to_save = FP_STATE_FPSIMD;
fpsimd_bind_state_to_cpu(&fp_state);
arm64/sve: Enable SVE state tracking for non-task contexts The current FPSIMD/SVE context handling support for non-task (i.e., KVM vcpu) contexts does not take SVE into account. This means that only task contexts can safely use SVE at present. In preparation for enabling KVM guests to use SVE, it is necessary to keep track of SVE state for non-task contexts too. This patch adds the necessary support, removing assumptions from the context switch code about the location of the SVE context storage. When binding a vcpu context, its vector length is arbitrarily specified as SVE_VL_MIN for now. In any case, because TIF_SVE is presently cleared at vcpu context bind time, the specified vector length will not be used for anything yet. In later patches TIF_SVE will be set here as appropriate, and the appropriate maximum vector length for the vcpu will be passed when binding. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-09-28 21:39:11 +08:00
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
clear_thread_flag(TIF_FOREIGN_FPSTATE);
}
}
/*
* Write back the vcpu FPSIMD regs if they are dirty, and invalidate the
* cpu FPSIMD regs so that they can't be spuriously reused if this vcpu
* disappears and another task or vcpu appears that recycles the same
* struct fpsimd_state.
*/
void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu)
{
KVM: arm64: Don't mask softirq with IRQs disabled in vcpu_put() Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") introduces a specific helper kvm_arch_vcpu_put_fp() for saving the vcpu FPSIMD state during vcpu_put(). This function uses local_bh_disable()/_enable() to protect the FPSIMD context manipulation from interruption by softirqs. This approach is not correct, because vcpu_put() can be invoked either from the KVM host vcpu thread (when exiting the vcpu run loop), or via a preempt notifier. In the former case, only preemption is disabled. In the latter case, the function is called from inside __schedule(), which means that IRQs are disabled. Use of local_bh_disable()/_enable() with IRQs disabled is considerd an error, resulting in lockdep splats while running VMs if lockdep is enabled. This patch disables IRQs instead of attempting to disable softirqs, avoiding the problem of calling local_bh_enable() with IRQs disabled in the __schedule() path. This creates an additional interrupt blackout during vcpu run loop exit, but this is the rare case and the blackout latency is still less than that of __schedule(). Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-06-15 23:47:24 +08:00
unsigned long flags;
local_irq_save(flags);
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
KVM: arm64: Handle SME host state when running guests While we don't currently support SME in guests we do currently support it for the host system so we need to take care of SME's impact, including the floating point register state, when running guests. Simiarly to SVE we need to manage the traps in CPACR_RL1, what is new is the handling of streaming mode and ZA. Normally we defer any handling of the floating point register state until the guest first uses it however if the system is in streaming mode FPSIMD and SVE operations may generate SME traps which we would need to distinguish from actual attempts by the guest to use SME. Rather than do this for the time being if we are in streaming mode when entering the guest we force the floating point state to be saved immediately and exit streaming mode, meaning that the guest won't generate SME traps for supported operations. We could handle ZA in the access trap similarly to the FPSIMD/SVE state without the disruption caused by streaming mode but for simplicity handle it the same way as streaming mode for now. This will be revisited when we support SME for guests (hopefully before SME hardware becomes available), for now it will only incur additional cost on systems with SME and even there only if streaming mode or ZA are enabled. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220419112247.711548-27-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-04-19 19:22:34 +08:00
/*
* If we have VHE then the Hyp code will reset CPACR_EL1 to
* CPACR_EL1_DEFAULT and we need to reenable SME.
*/
if (has_vhe() && system_supports_sme()) {
/* Also restore EL0 state seen on entry */
KVM: arm64: Move vcpu SVE/SME flags to the state flag set The two HOST_{SVE,SME}_ENABLED are only used for the host kernel to track its own state across a vcpu run so that it can be fully restored. Move these flags to the so called state set. Reviewed-by: Fuad Tabba <tabba@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-28 19:38:20 +08:00
if (vcpu_get_flag(vcpu, HOST_SME_ENABLED))
KVM: arm64: Handle SME host state when running guests While we don't currently support SME in guests we do currently support it for the host system so we need to take care of SME's impact, including the floating point register state, when running guests. Simiarly to SVE we need to manage the traps in CPACR_RL1, what is new is the handling of streaming mode and ZA. Normally we defer any handling of the floating point register state until the guest first uses it however if the system is in streaming mode FPSIMD and SVE operations may generate SME traps which we would need to distinguish from actual attempts by the guest to use SME. Rather than do this for the time being if we are in streaming mode when entering the guest we force the floating point state to be saved immediately and exit streaming mode, meaning that the guest won't generate SME traps for supported operations. We could handle ZA in the access trap similarly to the FPSIMD/SVE state without the disruption caused by streaming mode but for simplicity handle it the same way as streaming mode for now. This will be revisited when we support SME for guests (hopefully before SME hardware becomes available), for now it will only incur additional cost on systems with SME and even there only if streaming mode or ZA are enabled. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220419112247.711548-27-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-04-19 19:22:34 +08:00
sysreg_clear_set(CPACR_EL1, 0,
CPACR_EL1_SMEN_EL0EN |
CPACR_EL1_SMEN_EL1EN);
else
sysreg_clear_set(CPACR_EL1,
CPACR_EL1_SMEN_EL0EN,
CPACR_EL1_SMEN_EL1EN);
KVM: arm64: Synchronize SMEN on vcpu schedule out If we have VHE and need to reenable SME for host in kvm_arch_vcpu_put_fp, CPACR.SMEN is modified from 0 to 1. Trap control for reading SVCR is modified from enable to disable. Synchronization is needed before reading SVCR later in fpsimd_save, or it may cause sync exception which can not be handled by host. Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Nianyao Tang <tangnianyao@huawei.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221220105024.13484-1-dongbo4@huawei.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2022-12-20 18:50:24 +08:00
isb();
KVM: arm64: Handle SME host state when running guests While we don't currently support SME in guests we do currently support it for the host system so we need to take care of SME's impact, including the floating point register state, when running guests. Simiarly to SVE we need to manage the traps in CPACR_RL1, what is new is the handling of streaming mode and ZA. Normally we defer any handling of the floating point register state until the guest first uses it however if the system is in streaming mode FPSIMD and SVE operations may generate SME traps which we would need to distinguish from actual attempts by the guest to use SME. Rather than do this for the time being if we are in streaming mode when entering the guest we force the floating point state to be saved immediately and exit streaming mode, meaning that the guest won't generate SME traps for supported operations. We could handle ZA in the access trap similarly to the FPSIMD/SVE state without the disruption caused by streaming mode but for simplicity handle it the same way as streaming mode for now. This will be revisited when we support SME for guests (hopefully before SME hardware becomes available), for now it will only incur additional cost on systems with SME and even there only if streaming mode or ZA are enabled. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220419112247.711548-27-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-04-19 19:22:34 +08:00
}
KVM: arm64: Move FP state ownership from flag to a tristate The KVM FP code uses a pair of flags to denote three states: - FP_ENABLED set: the guest owns the FP state - FP_HOST set: the host owns the FP state - FP_ENABLED and FP_HOST clear: nobody owns the FP state at all and both flags set is an illegal state, which nothing ever checks for... As it turns out, this isn't really a good match for flags, and we'd be better off if this was a simpler tristate, each state having a name that actually reflect the state: - FP_STATE_FREE - FP_STATE_HOST_OWNED - FP_STATE_GUEST_OWNED Kill the two flags, and move over to an enum encoding these three states. This results in less confusing code, and less risk of ending up in the uncharted territory of a 4th state if we forget to clear one of the two flags. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Reiji Watanabe <reijiw@google.com>
2022-05-28 19:38:14 +08:00
if (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED) {
KVM: arm64: Get rid of host SVE tracking/saving The SVE host tracking in KVM is pretty involved. It relies on a set of flags tracking the ownership of the SVE register, as well as that of the EL0 access. It is also pretty scary: __hyp_sve_save_host() computes a thread_struct pointer and obtains a sve_state which gets directly accessed without further ado, even on nVHE. How can this even work? The answer to that is that it doesn't, and that this is mostly dead code. Closer examination shows that on executing a syscall, userspace loses its SVE state entirely. This is part of the ABI. Another thing to notice is that although the kernel provides helpers such as kernel_neon_begin()/end(), they only deal with the FP/NEON state, and not SVE. Given that you can only execute a guest as the result of a syscall, and that the kernel cannot use SVE by itself, it becomes pretty obvious that there is never any host SVE state to save, and that this code is only there to increase confusion. Get rid of the TIF_SVE tracking and host save infrastructure altogether. Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-27 18:18:00 +08:00
if (vcpu_has_sve(vcpu)) {
KVM: arm64: Use {read,write}_sysreg_el1 to access ZCR_EL1 Switch to the unified EL1 accessors for ZCR_EL1, which will make things easier for nVHE support. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-03-11 21:51:44 +08:00
__vcpu_sys_reg(vcpu, ZCR_EL1) = read_sysreg_el1(SYS_ZCR);
KVM: arm64: Save guest's ZCR_EL1 before saving the FPSIMD state Make sure the guest's ZCR_EL1 is saved before we save/flush the state. This will be useful in later patches. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-03-12 22:30:52 +08:00
KVM: arm64: Save/restore SVE state for nVHE Implement the SVE save/restore for nVHE, following a similar logic to that of the VHE implementation: - the SVE state is switched on trap from EL1 to EL2 - no further changes to ZCR_EL2 occur as long as the guest isn't preempted or exit to userspace - ZCR_EL2 is reset to its default value on the first SVE access from the host EL1, and ZCR_EL1 restored to the default guest value in vcpu_put() Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-03-12 02:29:55 +08:00
/* Restore the VL that was saved when bound to the CPU */
if (!has_vhe())
sve_cond_update_zcr_vq(vcpu_sve_max_vq(vcpu) - 1,
SYS_ZCR_EL1);
}
KVM: arm64: Save guest's ZCR_EL1 before saving the FPSIMD state Make sure the guest's ZCR_EL1 is saved before we save/flush the state. This will be useful in later patches. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-03-12 22:30:52 +08:00
fpsimd_save_and_flush_cpu_state();
KVM: arm64: Get rid of host SVE tracking/saving The SVE host tracking in KVM is pretty involved. It relies on a set of flags tracking the ownership of the SVE register, as well as that of the EL0 access. It is also pretty scary: __hyp_sve_save_host() computes a thread_struct pointer and obtains a sve_state which gets directly accessed without further ado, even on nVHE. How can this even work? The answer to that is that it doesn't, and that this is mostly dead code. Closer examination shows that on executing a syscall, userspace loses its SVE state entirely. This is part of the ABI. Another thing to notice is that although the kernel provides helpers such as kernel_neon_begin()/end(), they only deal with the FP/NEON state, and not SVE. Given that you can only execute a guest as the result of a syscall, and that the kernel cannot use SVE by itself, it becomes pretty obvious that there is never any host SVE state to save, and that this code is only there to increase confusion. Get rid of the TIF_SVE tracking and host save infrastructure altogether. Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-10-27 18:18:00 +08:00
} else if (has_vhe() && system_supports_sve()) {
KVM: arm64/sve: Fix SVE trap restoration for non-current tasks Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") attempts to restore the configuration of userspace SVE trapping via a call to fpsimd_bind_task_to_cpu(), but the logic for determining when to do this is not correct. The patch makes the errnoenous assumption that the only task that may try to enter userspace with the currently loaded FPSIMD/SVE register content is current. This may not be the case however: if some other user task T is scheduled on the CPU during the execution of the KVM run loop, and the vcpu does not try to use the registers in the meantime, then T's state may be left there intact. If T happens to be the next task to enter userspace on this CPU then the hooks for reloading the register state and configuring traps will be skipped. (Also, current never has SVE state at this point anyway and should always have the trap enabled, as a side-effect of the ioctl() syscall needed to reach the KVM run loop in the first place.) This patch instead restores the state of the EL0 trap from the state observed at the most recent vcpu_load(), ensuring that the trap is set correctly for the loaded context (if any). Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-06-15 23:47:25 +08:00
/*
* The FPSIMD/SVE state in the CPU has not been touched, and we
* have SVE (and VHE): CPACR_EL1 (alias CPTR_EL2) has been
* reset to CPACR_EL1_DEFAULT by the Hyp code, disabling SVE
* for EL0. To avoid spurious traps, restore the trap state
* seen by kvm_arch_vcpu_load_fp():
*/
KVM: arm64: Move vcpu SVE/SME flags to the state flag set The two HOST_{SVE,SME}_ENABLED are only used for the host kernel to track its own state across a vcpu run so that it can be fully restored. Move these flags to the so called state set. Reviewed-by: Fuad Tabba <tabba@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-05-28 19:38:20 +08:00
if (vcpu_get_flag(vcpu, HOST_SVE_ENABLED))
KVM: arm64/sve: Fix SVE trap restoration for non-current tasks Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") attempts to restore the configuration of userspace SVE trapping via a call to fpsimd_bind_task_to_cpu(), but the logic for determining when to do this is not correct. The patch makes the errnoenous assumption that the only task that may try to enter userspace with the currently loaded FPSIMD/SVE register content is current. This may not be the case however: if some other user task T is scheduled on the CPU during the execution of the KVM run loop, and the vcpu does not try to use the registers in the meantime, then T's state may be left there intact. If T happens to be the next task to enter userspace on this CPU then the hooks for reloading the register state and configuring traps will be skipped. (Also, current never has SVE state at this point anyway and should always have the trap enabled, as a side-effect of the ioctl() syscall needed to reach the KVM run loop in the first place.) This patch instead restores the state of the EL0 trap from the state observed at the most recent vcpu_load(), ensuring that the trap is set correctly for the loaded context (if any). Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-06-15 23:47:25 +08:00
sysreg_clear_set(CPACR_EL1, 0, CPACR_EL1_ZEN_EL0EN);
else
sysreg_clear_set(CPACR_EL1, CPACR_EL1_ZEN_EL0EN, 0);
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
}
KVM: arm64: Don't mask softirq with IRQs disabled in vcpu_put() Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") introduces a specific helper kvm_arch_vcpu_put_fp() for saving the vcpu FPSIMD state during vcpu_put(). This function uses local_bh_disable()/_enable() to protect the FPSIMD context manipulation from interruption by softirqs. This approach is not correct, because vcpu_put() can be invoked either from the KVM host vcpu thread (when exiting the vcpu run loop), or via a preempt notifier. In the former case, only preemption is disabled. In the latter case, the function is called from inside __schedule(), which means that IRQs are disabled. Use of local_bh_disable()/_enable() with IRQs disabled is considerd an error, resulting in lockdep splats while running VMs if lockdep is enabled. This patch disables IRQs instead of attempting to disable softirqs, avoiding the problem of calling local_bh_enable() with IRQs disabled in the __schedule() path. This creates an additional interrupt blackout during vcpu run loop exit, but this is the rare case and the blackout latency is still less than that of __schedule(). Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-06-15 23:47:24 +08:00
local_irq_restore(flags);
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing This patch refactors KVM to align the host and guest FPSIMD save/restore logic with each other for arm64. This reduces the number of redundant save/restore operations that must occur, and reduces the common-case IRQ blackout time during guest exit storms by saving the host state lazily and optimising away the need to restore the host state before returning to the run loop. Four hooks are defined in order to enable this: * kvm_arch_vcpu_run_map_fp(): Called on PID change to map necessary bits of current to Hyp. * kvm_arch_vcpu_load_fp(): Set up FP/SIMD for entering the KVM run loop (parse as "vcpu_load fp"). * kvm_arch_vcpu_ctxsync_fp(): Get FP/SIMD into a safe state for re-enabling interrupts after a guest exit back to the run loop. For arm64 specifically, this involves updating the host kernel's FPSIMD context tracking metadata so that kernel-mode NEON use will cause the vcpu's FPSIMD state to be saved back correctly into the vcpu struct. This must be done before re-enabling interrupts because kernel-mode NEON may be used by softirqs. * kvm_arch_vcpu_put_fp(): Save guest FP/SIMD state back to memory and dissociate from the CPU ("vcpu_put fp"). Also, the arm64 FPSIMD context switch code is updated to enable it to save back FPSIMD state for a vcpu, not just current. A few helpers drive this: * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp): mark this CPU as having context fp (which may belong to a vcpu) currently loaded in its registers. This is the non-task equivalent of the static function fpsimd_bind_to_cpu() in fpsimd.c. * task_fpsimd_save(): exported to allow KVM to save the guest's FPSIMD state back to memory on exit from the run loop. * fpsimd_flush_state(): invalidate any context's FPSIMD state that is currently loaded. Used to disassociate the vcpu from the CPU regs on run loop exit. These changes allow the run loop to enable interrupts (and thus softirqs that may use kernel-mode NEON) without having to save the guest's FPSIMD state eagerly. Some new vcpu_arch fields are added to make all this work. Because host FPSIMD state can now be saved back directly into current's thread_struct as appropriate, host_cpu_context is no longer used for preserving the FPSIMD state. However, it is still needed for preserving other things such as the host's system registers. To avoid ABI churn, the redundant storage space in host_cpu_context is not removed for now. arch/arm is not addressed by this patch and continues to use its current save/restore logic. It could provide implementations of the helpers later if desired. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-04-06 21:55:59 +08:00
}
Reference in New Issue Copy Permalink