linux/include/asm-generic/tlb.h

497 lines
15 KiB
C
Raw Normal View History

/* include/asm-generic/tlb.h
*
* Generic TLB shootdown code
*
* Copyright 2001 Red Hat, Inc.
* Based on code from mm/memory.c Copyright Linus Torvalds and others.
*
* Copyright 2011 Red Hat, Inc., Peter Zijlstra
mm: mmu_gather rework Rework the existing mmu_gather infrastructure. The direct purpose of these patches was to allow preemptible mmu_gather, but even without that I think these patches provide an improvement to the status quo. The first 9 patches rework the mmu_gather infrastructure. For review purpose I've split them into generic and per-arch patches with the last of those a generic cleanup. The next patch provides generic RCU page-table freeing, and the followup is a patch converting s390 to use this. I've also got 4 patches from DaveM lined up (not included in this series) that uses this to implement gup_fast() for sparc64. Then there is one patch that extends the generic mmu_gather batching. After that follow the mm preemptibility patches, these make part of the mm a lot more preemptible. It converts i_mmap_lock and anon_vma->lock to mutexes which together with the mmu_gather rework makes mmu_gather preemptible as well. Making i_mmap_lock a mutex also enables a clean-up of the truncate code. This also allows for preemptible mmu_notifiers, something that XPMEM I think wants. Furthermore, it removes the new and universially detested unmap_mutex. This patch: Remove the first obstacle towards a fully preemptible mmu_gather. The current scheme assumes mmu_gather is always done with preemption disabled and uses per-cpu storage for the page batches. Change this to try and allocate a page for batching and in case of failure, use a small on-stack array to make some progress. Preemptible mmu_gather is desired in general and usable once i_mmap_lock becomes a mutex. Doing it before the mutex conversion saves us from having to rework the code by moving the mmu_gather bits inside the pte_lock. Also avoid flushing the tlb batches from under the pte lock, this is useful even without the i_mmap_lock conversion as it significantly reduces pte lock hold times. [akpm@linux-foundation.org: fix comment tpyo] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:11:45 +08:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _ASM_GENERIC__TLB_H
#define _ASM_GENERIC__TLB_H
#include <linux/mmu_notifier.h>
#include <linux/swap.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#ifdef CONFIG_MMU
/*
* Generic MMU-gather implementation.
*
* The mmu_gather data structure is used by the mm code to implement the
* correct and efficient ordering of freeing pages and TLB invalidations.
*
* This correct ordering is:
*
* 1) unhook page
* 2) TLB invalidate page
* 3) free page
*
* That is, we must never free a page before we have ensured there are no live
* translations left to it. Otherwise it might be possible to observe (or
* worse, change) the page content after it has been reused.
*
* The mmu_gather API consists of:
*
* - tlb_gather_mmu() / tlb_finish_mmu(); start and finish a mmu_gather
*
* Finish in particular will issue a (final) TLB invalidate and free
* all (remaining) queued pages.
*
* - tlb_start_vma() / tlb_end_vma(); marks the start / end of a VMA
*
* Defaults to flushing at tlb_end_vma() to reset the range; helps when
* there's large holes between the VMAs.
*
* - tlb_remove_page() / __tlb_remove_page()
* - tlb_remove_page_size() / __tlb_remove_page_size()
*
* __tlb_remove_page_size() is the basic primitive that queues a page for
* freeing. __tlb_remove_page() assumes PAGE_SIZE. Both will return a
* boolean indicating if the queue is (now) full and a call to
* tlb_flush_mmu() is required.
*
* tlb_remove_page() and tlb_remove_page_size() imply the call to
* tlb_flush_mmu() when required and has no return value.
*
* - tlb_change_page_size()
*
* call before __tlb_remove_page*() to set the current page-size; implies a
* possible tlb_flush_mmu() call.
*
* - tlb_flush_mmu() / tlb_flush_mmu_tlbonly() / tlb_flush_mmu_free()
*
* tlb_flush_mmu_tlbonly() - does the TLB invalidate (and resets
* related state, like the range)
*
* tlb_flush_mmu_free() - frees the queued pages; make absolutely
* sure no additional tlb_remove_page()
* calls happen between _tlbonly() and this.
*
* tlb_flush_mmu() - the above two calls.
*
* - mmu_gather::fullmm
*
* A flag set by tlb_gather_mmu() to indicate we're going to free
* the entire mm; this allows a number of optimizations.
*
* - We can ignore tlb_{start,end}_vma(); because we don't
* care about ranges. Everything will be shot down.
*
* - (RISC) architectures that use ASIDs can cycle to a new ASID
* and delay the invalidation until ASID space runs out.
*
* - mmu_gather::need_flush_all
*
* A flag that can be set by the arch code if it wants to force
* flush the entire TLB irrespective of the range. For instance
* x86-PAE needs this when changing top-level entries.
*
* And requires the architecture to provide and implement tlb_flush().
*
* tlb_flush() may, in addition to the above mentioned mmu_gather fields, make
* use of:
*
* - mmu_gather::start / mmu_gather::end
*
* which provides the range that needs to be flushed to cover the pages to
* be freed.
*
* - mmu_gather::freed_tables
*
* set when we freed page table pages
*
* - tlb_get_unmap_shift() / tlb_get_unmap_size()
*
* returns the smallest TLB entry size unmapped in this range
*
* Additionally there are a few opt-in features:
*
* HAVE_MMU_GATHER_PAGE_SIZE
*
* This ensures we call tlb_flush() every time tlb_change_page_size() actually
* changes the size and provides mmu_gather::page_size to tlb_flush().
*
* HAVE_RCU_TABLE_FREE
*
* This provides tlb_remove_table(), to be used instead of tlb_remove_page()
* for page directores (__p*_free_tlb()). This provides separate freeing of
* the page-table pages themselves in a semi-RCU fashion (see comment below).
* Useful if your architecture doesn't use IPIs for remote TLB invalidates
* and therefore doesn't naturally serialize with software page-table walkers.
*
* When used, an architecture is expected to provide __tlb_remove_table()
* which does the actual freeing of these pages.
*
* HAVE_RCU_TABLE_INVALIDATE
*
* This makes HAVE_RCU_TABLE_FREE call tlb_flush_mmu_tlbonly() before freeing
* the page-table pages. Required if you use HAVE_RCU_TABLE_FREE and your
* architecture uses the Linux page-tables natively.
*
*/
#define HAVE_GENERIC_MMU_GATHER
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
/*
* Semi RCU freeing of the page directories.
*
* This is needed by some architectures to implement software pagetable walkers.
*
* gup_fast() and other software pagetable walkers do a lockless page-table
* walk and therefore needs some synchronization with the freeing of the page
* directories. The chosen means to accomplish that is by disabling IRQs over
* the walk.
*
* Architectures that use IPIs to flush TLBs will then automagically DTRT,
* since we unlink the page, flush TLBs, free the page. Since the disabling of
* IRQs delays the completion of the TLB flush we can never observe an already
* freed page.
*
* Architectures that do not have this (PPC) need to delay the freeing by some
* other means, this is that means.
*
* What we do is batch the freed directory pages (tables) and RCU free them.
* We use the sched RCU variant, as that guarantees that IRQ/preempt disabling
* holds off grace periods.
*
* However, in order to batch these pages we need to allocate storage, this
* allocation is deep inside the MM code and can thus easily fail on memory
* pressure. To guarantee progress we fall back to single table freeing, see
* the implementation of tlb_remove_table_one().
*
*/
struct mmu_table_batch {
struct rcu_head rcu;
unsigned int nr;
void *tables[0];
};
#define MAX_TABLE_BATCH \
((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *))
extern void tlb_table_flush(struct mmu_gather *tlb);
extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
#endif
mm: mmu_gather rework Rework the existing mmu_gather infrastructure. The direct purpose of these patches was to allow preemptible mmu_gather, but even without that I think these patches provide an improvement to the status quo. The first 9 patches rework the mmu_gather infrastructure. For review purpose I've split them into generic and per-arch patches with the last of those a generic cleanup. The next patch provides generic RCU page-table freeing, and the followup is a patch converting s390 to use this. I've also got 4 patches from DaveM lined up (not included in this series) that uses this to implement gup_fast() for sparc64. Then there is one patch that extends the generic mmu_gather batching. After that follow the mm preemptibility patches, these make part of the mm a lot more preemptible. It converts i_mmap_lock and anon_vma->lock to mutexes which together with the mmu_gather rework makes mmu_gather preemptible as well. Making i_mmap_lock a mutex also enables a clean-up of the truncate code. This also allows for preemptible mmu_notifiers, something that XPMEM I think wants. Furthermore, it removes the new and universially detested unmap_mutex. This patch: Remove the first obstacle towards a fully preemptible mmu_gather. The current scheme assumes mmu_gather is always done with preemption disabled and uses per-cpu storage for the page batches. Change this to try and allocate a page for batching and in case of failure, use a small on-stack array to make some progress. Preemptible mmu_gather is desired in general and usable once i_mmap_lock becomes a mutex. Doing it before the mutex conversion saves us from having to rework the code by moving the mmu_gather bits inside the pte_lock. Also avoid flushing the tlb batches from under the pte lock, this is useful even without the i_mmap_lock conversion as it significantly reduces pte lock hold times. [akpm@linux-foundation.org: fix comment tpyo] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:11:45 +08:00
/*
* If we can't allocate a page to make a big batch of page pointers
* to work on, then just handle a few from the on-stack structure.
*/
#define MMU_GATHER_BUNDLE 8
struct mmu_gather_batch {
struct mmu_gather_batch *next;
unsigned int nr;
unsigned int max;
struct page *pages[0];
};
#define MAX_GATHER_BATCH \
((PAGE_SIZE - sizeof(struct mmu_gather_batch)) / sizeof(void *))
mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT Since commit e303297e6c3a ("mm: extended batches for generic mmu_gather") we are batching pages to be freed until either tlb_next_batch cannot allocate a new batch or we are done. This works just fine most of the time but we can get in troubles with non-preemptible kernel (CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY) on large machines where too aggressive batching might lead to soft lockups during process exit path (exit_mmap) because there are no scheduling points down the free_pages_and_swap_cache path and so the freeing can take long enough to trigger the soft lockup. The lockup is harmless except when the system is setup to panic on softlockup which is not that unusual. The simplest way to work around this issue is to limit the maximum number of batches in a single mmu_gather. 10k of collected pages should be safe to prevent from soft lockups (we would have 2ms for one) even if they are all freed without an explicit scheduling point. This patch doesn't add any new explicit scheduling points because it relies on zap_pmd_range during page tables zapping which calls cond_resched per PMD. The following lockup has been reported for 3.0 kernel with a huge process (in order of hundreds gigs but I do know any more details). BUG: soft lockup - CPU#56 stuck for 22s! [kernel:31053] Modules linked in: af_packet nfs lockd fscache auth_rpcgss nfs_acl sunrpc mptctl mptbase autofs4 binfmt_misc dm_round_robin dm_multipath bonding cpufreq_conservative cpufreq_userspace cpufreq_powersave pcc_cpufreq mperf microcode fuse loop osst sg sd_mod crc_t10dif st qla2xxx scsi_transport_fc scsi_tgt netxen_nic i7core_edac iTCO_wdt joydev e1000e serio_raw pcspkr edac_core iTCO_vendor_support acpi_power_meter rtc_cmos hpwdt hpilo button container usbhid hid dm_mirror dm_region_hash dm_log linear uhci_hcd ehci_hcd usbcore usb_common scsi_dh_emc scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh dm_snapshot pcnet32 mii edd dm_mod raid1 ext3 mbcache jbd fan thermal processor thermal_sys hwmon cciss scsi_mod Supported: Yes CPU 56 Pid: 31053, comm: kernel Not tainted 3.0.31-0.9-default #1 HP ProLiant DL580 G7 RIP: 0010: _raw_spin_unlock_irqrestore+0x8/0x10 RSP: 0018:ffff883ec1037af0 EFLAGS: 00000206 RAX: 0000000000000e00 RBX: ffffea01a0817e28 RCX: ffff88803ffd9e80 RDX: 0000000000000200 RSI: 0000000000000206 RDI: 0000000000000206 RBP: 0000000000000002 R08: 0000000000000001 R09: ffff887ec724a400 R10: 0000000000000000 R11: dead000000200200 R12: ffffffff8144c26e R13: 0000000000000030 R14: 0000000000000297 R15: 000000000000000e FS: 00007ed834282700(0000) GS:ffff88c03f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000068b240 CR3: 0000003ec13c5000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kernel (pid: 31053, threadinfo ffff883ec1036000, task ffff883ebd5d4100) Call Trace: release_pages+0xc5/0x260 free_pages_and_swap_cache+0x9d/0xc0 tlb_flush_mmu+0x5c/0x80 tlb_finish_mmu+0xe/0x50 exit_mmap+0xbd/0x120 mmput+0x49/0x120 exit_mm+0x122/0x160 do_exit+0x17a/0x430 do_group_exit+0x3d/0xb0 get_signal_to_deliver+0x247/0x480 do_signal+0x71/0x1b0 do_notify_resume+0x98/0xb0 int_signal+0x12/0x17 DWARF2 unwinder stuck at int_signal+0x12/0x17 Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> [3.0+] Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-05 07:35:12 +08:00
/*
* Limit the maximum number of mmu_gather batches to reduce a risk of soft
* lockups for non-preemptible kernels on huge machines when a lot of memory
* is zapped during unmapping.
* 10K pages freed at once should be safe even without a preemption point.
*/
#define MAX_GATHER_BATCH_COUNT (10000UL/MAX_GATHER_BATCH)
/*
* struct mmu_gather is an opaque type used by the mm code for passing around
* any data needed by arch specific code for tlb_remove_page.
*/
struct mmu_gather {
struct mm_struct *mm;
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
struct mmu_table_batch *batch;
#endif
unsigned long start;
unsigned long end;
/*
* we are in the middle of an operation to clear
* a full mm and can make some optimizations
*/
unsigned int fullmm : 1;
/*
* we have performed an operation which
* requires a complete flush of the tlb
*/
unsigned int need_flush_all : 1;
/*
* we have removed page directories
*/
unsigned int freed_tables : 1;
/*
* at which levels have we cleared entries?
*/
unsigned int cleared_ptes : 1;
unsigned int cleared_pmds : 1;
unsigned int cleared_puds : 1;
unsigned int cleared_p4ds : 1;
unsigned int batch_count;
struct mmu_gather_batch *active;
struct mmu_gather_batch local;
struct page *__pages[MMU_GATHER_BUNDLE];
#ifdef CONFIG_HAVE_MMU_GATHER_PAGE_SIZE
unsigned int page_size;
#endif
};
void arch_tlb_gather_mmu(struct mmu_gather *tlb,
struct mm_struct *mm, unsigned long start, unsigned long end);
void tlb_flush_mmu(struct mmu_gather *tlb);
void arch_tlb_finish_mmu(struct mmu_gather *tlb,
mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Nadav reported parallel MADV_DONTNEED on same range has a stale TLB problem and Mel fixed it[1] and found same problem on MADV_FREE[2]. Quote from Mel Gorman: "The race in question is CPU 0 running madv_free and updating some PTEs while CPU 1 is also running madv_free and looking at the same PTEs. CPU 1 may have writable TLB entries for a page but fail the pte_dirty check (because CPU 0 has updated it already) and potentially fail to flush. Hence, when madv_free on CPU 1 returns, there are still potentially writable TLB entries and the underlying PTE is still present so that a subsequent write does not necessarily propagate the dirty bit to the underlying PTE any more. Reclaim at some unknown time at the future may then see that the PTE is still clean and discard the page even though a write has happened in the meantime. I think this is possible but I could have missed some protection in madv_free that prevents it happening." This patch aims for solving both problems all at once and is ready for other problem with KSM, MADV_FREE and soft-dirty story[3]. TLB batch API(tlb_[gather|finish]_mmu] uses [inc|dec]_tlb_flush_pending and mmu_tlb_flush_pending so that when tlb_finish_mmu is called, we can catch there are parallel threads going on. In that case, forcefully, flush TLB to prevent for user to access memory via stale TLB entry although it fail to gather page table entry. I confirmed this patch works with [4] test program Nadav gave so this patch supersedes "mm: Always flush VMA ranges affected by zap_page_range v2" in current mmotm. NOTE: This patch modifies arch-specific TLB gathering interface(x86, ia64, s390, sh, um). It seems most of architecture are straightforward but s390 need to be careful because tlb_flush_mmu works only if mm->context.flush_mm is set to non-zero which happens only a pte entry really is cleared by ptep_get_and_clear and friends. However, this problem never changes the pte entries but need to flush to prevent memory access from stale tlb. [1] http://lkml.kernel.org/r/20170725101230.5v7gvnjmcnkzzql3@techsingularity.net [2] http://lkml.kernel.org/r/20170725100722.2dxnmgypmwnrfawp@suse.de [3] http://lkml.kernel.org/r/BD3A0EBE-ECF4-41D4-87FA-C755EA9AB6BD@gmail.com [4] https://patchwork.kernel.org/patch/9861621/ [minchan@kernel.org: decrease tlb flush pending count in tlb_finish_mmu] Link: http://lkml.kernel.org/r/20170808080821.GA31730@bbox Link: http://lkml.kernel.org/r/20170802000818.4760-7-namit@vmware.com Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Nadav Amit <namit@vmware.com> Reported-by: Nadav Amit <namit@vmware.com> Reported-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Jeff Dike <jdike@addtoit.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-11 06:24:12 +08:00
unsigned long start, unsigned long end, bool force);
void tlb_flush_mmu_free(struct mmu_gather *tlb);
extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page,
int page_size);
static inline void __tlb_adjust_range(struct mmu_gather *tlb,
unsigned long address,
unsigned int range_size)
{
tlb->start = min(tlb->start, address);
tlb->end = max(tlb->end, address + range_size);
}
static inline void __tlb_reset_range(struct mmu_gather *tlb)
{
if (tlb->fullmm) {
tlb->start = tlb->end = ~0;
} else {
tlb->start = TASK_SIZE;
tlb->end = 0;
}
tlb->freed_tables = 0;
tlb->cleared_ptes = 0;
tlb->cleared_pmds = 0;
tlb->cleared_puds = 0;
tlb->cleared_p4ds = 0;
}
static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
{
if (!tlb->end)
return;
tlb_flush(tlb);
mmu_notifier_invalidate_range(tlb->mm, tlb->start, tlb->end);
__tlb_reset_range(tlb);
}
static inline void tlb_remove_page_size(struct mmu_gather *tlb,
struct page *page, int page_size)
{
if (__tlb_remove_page_size(tlb, page, page_size))
tlb_flush_mmu(tlb);
}
static inline bool __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
{
return __tlb_remove_page_size(tlb, page, PAGE_SIZE);
}
mm: change the interface for __tlb_remove_page() This updates the generic and arch specific implementation to return true if we need to do a tlb flush. That means if a __tlb_remove_page indicate a flush is needed, the page we try to remove need to be tracked and added again after the flush. We need to track it because we have already update the pte to none and we can't just loop back. This change is done to enable us to do a tlb_flush when we try to flush a range that consists of different page sizes. For architectures like ppc64, we can do a range based tlb flush and we need to track page size for that. When we try to remove a huge page, we will force a tlb flush and starts a new mmu gather. [aneesh.kumar@linux.vnet.ibm.com: mm-change-the-interface-for-__tlb_remove_page-v3] Link: http://lkml.kernel.org/r/1465049193-22197-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1464860389-29019-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:24:09 +08:00
/* tlb_remove_page
* Similar to __tlb_remove_page but will call tlb_flush_mmu() itself when
* required.
*/
static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
{
return tlb_remove_page_size(tlb, page, PAGE_SIZE);
mm: change the interface for __tlb_remove_page() This updates the generic and arch specific implementation to return true if we need to do a tlb flush. That means if a __tlb_remove_page indicate a flush is needed, the page we try to remove need to be tracked and added again after the flush. We need to track it because we have already update the pte to none and we can't just loop back. This change is done to enable us to do a tlb_flush when we try to flush a range that consists of different page sizes. For architectures like ppc64, we can do a range based tlb flush and we need to track page size for that. When we try to remove a huge page, we will force a tlb flush and starts a new mmu gather. [aneesh.kumar@linux.vnet.ibm.com: mm-change-the-interface-for-__tlb_remove_page-v3] Link: http://lkml.kernel.org/r/1465049193-22197-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1464860389-29019-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 06:24:09 +08:00
}
static inline void tlb_change_page_size(struct mmu_gather *tlb,
unsigned int page_size)
{
#ifdef CONFIG_HAVE_MMU_GATHER_PAGE_SIZE
if (tlb->page_size && tlb->page_size != page_size) {
if (!tlb->fullmm)
tlb_flush_mmu(tlb);
}
tlb->page_size = page_size;
#endif
}
static inline unsigned long tlb_get_unmap_shift(struct mmu_gather *tlb)
{
if (tlb->cleared_ptes)
return PAGE_SHIFT;
if (tlb->cleared_pmds)
return PMD_SHIFT;
if (tlb->cleared_puds)
return PUD_SHIFT;
if (tlb->cleared_p4ds)
return P4D_SHIFT;
return PAGE_SHIFT;
}
static inline unsigned long tlb_get_unmap_size(struct mmu_gather *tlb)
{
return 1UL << tlb_get_unmap_shift(tlb);
}
/*
* In the case of tlb vma handling, we can optimise these away in the
* case where we're doing a full MM flush. When we're doing a munmap,
* the vmas are adjusted to only cover the region to be torn down.
*/
#ifndef tlb_start_vma
#define tlb_start_vma(tlb, vma) do { } while (0)
#endif
#define __tlb_end_vma(tlb, vma) \
do { \
if (!tlb->fullmm) \
tlb_flush_mmu_tlbonly(tlb); \
} while (0)
#ifndef tlb_end_vma
#define tlb_end_vma __tlb_end_vma
#endif
#ifndef __tlb_remove_tlb_entry
#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
#endif
/**
* tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation.
*
* Record the fact that pte's were really unmapped by updating the range,
* so we can later optimise away the tlb invalidate. This helps when
* userspace is unmapping already-unmapped pages, which happens quite a lot.
*/
#define tlb_remove_tlb_entry(tlb, ptep, address) \
do { \
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
tlb->cleared_ptes = 1; \
__tlb_remove_tlb_entry(tlb, ptep, address); \
} while (0)
#define tlb_remove_huge_tlb_entry(h, tlb, ptep, address) \
do { \
unsigned long _sz = huge_page_size(h); \
__tlb_adjust_range(tlb, address, _sz); \
if (_sz == PMD_SIZE) \
tlb->cleared_pmds = 1; \
else if (_sz == PUD_SIZE) \
tlb->cleared_puds = 1; \
__tlb_remove_tlb_entry(tlb, ptep, address); \
} while (0)
/**
* tlb_remove_pmd_tlb_entry - remember a pmd mapping for later tlb invalidation
* This is a nop so far, because only x86 needs it.
*/
#ifndef __tlb_remove_pmd_tlb_entry
#define __tlb_remove_pmd_tlb_entry(tlb, pmdp, address) do {} while (0)
#endif
#define tlb_remove_pmd_tlb_entry(tlb, pmdp, address) \
do { \
__tlb_adjust_range(tlb, address, HPAGE_PMD_SIZE); \
tlb->cleared_pmds = 1; \
__tlb_remove_pmd_tlb_entry(tlb, pmdp, address); \
} while (0)
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
/**
* tlb_remove_pud_tlb_entry - remember a pud mapping for later tlb
* invalidation. This is a nop so far, because only x86 needs it.
*/
#ifndef __tlb_remove_pud_tlb_entry
#define __tlb_remove_pud_tlb_entry(tlb, pudp, address) do {} while (0)
#endif
#define tlb_remove_pud_tlb_entry(tlb, pudp, address) \
do { \
__tlb_adjust_range(tlb, address, HPAGE_PUD_SIZE); \
tlb->cleared_puds = 1; \
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 06:57:02 +08:00
__tlb_remove_pud_tlb_entry(tlb, pudp, address); \
} while (0)
/*
* For things like page tables caches (ie caching addresses "inside" the
* page tables, like x86 does), for legacy reasons, flushing an
* individual page had better flush the page table caches behind it. This
* is definitely how x86 works, for example. And if you have an
* architected non-legacy page table cache (which I'm not aware of
* anybody actually doing), you're going to have some architecturally
* explicit flushing for that, likely *separate* from a regular TLB entry
* flush, and thus you'd need more than just some range expansion..
*
* So if we ever find an architecture
* that would want something that odd, I think it is up to that
* architecture to do its own odd thing, not cause pain for others
* http://lkml.kernel.org/r/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com
*
* For now w.r.t page table cache, mark the range_size as PAGE_SIZE
*/
#ifndef pte_free_tlb
#define pte_free_tlb(tlb, ptep, address) \
do { \
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
tlb->freed_tables = 1; \
tlb->cleared_pmds = 1; \
__pte_free_tlb(tlb, ptep, address); \
} while (0)
#endif
#ifndef pmd_free_tlb
#define pmd_free_tlb(tlb, pmdp, address) \
do { \
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
tlb->freed_tables = 1; \
tlb->cleared_puds = 1; \
__pmd_free_tlb(tlb, pmdp, address); \
} while (0)
#endif
#ifndef __ARCH_HAS_4LEVEL_HACK
#ifndef pud_free_tlb
#define pud_free_tlb(tlb, pudp, address) \
do { \
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
tlb->freed_tables = 1; \
tlb->cleared_p4ds = 1; \
__pud_free_tlb(tlb, pudp, address); \
} while (0)
#endif
#endif
#ifndef __ARCH_HAS_5LEVEL_HACK
#ifndef p4d_free_tlb
#define p4d_free_tlb(tlb, pudp, address) \
do { \
__tlb_adjust_range(tlb, address, PAGE_SIZE); \
tlb->freed_tables = 1; \
__p4d_free_tlb(tlb, pudp, address); \
} while (0)
#endif
#endif
#endif /* CONFIG_MMU */
#define tlb_migrate_finish(mm) do {} while (0)
#endif /* _ASM_GENERIC__TLB_H */