linux/net/core/sock_reuseport.c

650 lines
16 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* To speed up listener socket lookup, create an array to store all sockets
* listening on the same port. This allows a decision to be made after finding
* the first socket. An optional BPF program can also be configured for
* selecting the socket index from the array of available sockets.
*/
#include <net/ip.h>
#include <net/sock_reuseport.h>
#include <linux/bpf.h>
net: Add ID (if needed) to sock_reuseport and expose reuseport_lock A later patch will introduce a BPF_MAP_TYPE_REUSEPORT_ARRAY which allows a SO_REUSEPORT sk to be added to a bpf map. When a sk is removed from reuse->socks[], it also needs to be removed from the bpf map. Also, when adding a sk to a bpf map, the bpf map needs to ensure it is indeed in a reuse->socks[]. Hence, reuseport_lock is needed by the bpf map to ensure its map_update_elem() and map_delete_elem() operations are in-sync with the reuse->socks[]. The BPF_MAP_TYPE_REUSEPORT_ARRAY map will only acquire the reuseport_lock after ensuring the adding sk is already in a reuseport group (i.e. reuse->socks[]). The map_lookup_elem() will be lockless. This patch also adds an ID to sock_reuseport. A later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT which allows a bpf prog to select a sk from a bpf map. It is inflexible to statically enforce a bpf map can only contain the sk belonging to a particular reuse->socks[] (i.e. same IP:PORT) during the bpf verification time. For example, think about the the map-in-map situation where the inner map can be dynamically changed in runtime and the outer map may have inner maps belonging to different reuseport groups. Hence, when the bpf prog (in the new BPF_PROG_TYPE_SK_REUSEPORT type) selects a sk, this selected sk has to be checked to ensure it belongs to the requesting reuseport group (i.e. the group serving that IP:PORT). The "sk->sk_reuseport_cb" pointer cannot be used for this checking purpose because the pointer value will change after reuseport_grow(). Instead of saving all checking conditions like the ones preced calling "reuseport_add_sock()" and compare them everytime a bpf_prog is run, a 32bits ID is introduced to survive the reuseport_grow(). The ID is only acquired if any of the reuse->socks[] is added to the newly introduced "BPF_MAP_TYPE_REUSEPORT_ARRAY" map. If "BPF_MAP_TYPE_REUSEPORT_ARRAY" is not used, the changes in this patch is a no-op. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:22 +08:00
#include <linux/idr.h>
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:26 +08:00
#include <linux/filter.h>
#include <linux/rcupdate.h>
#define INIT_SOCKS 128
net: Add ID (if needed) to sock_reuseport and expose reuseport_lock A later patch will introduce a BPF_MAP_TYPE_REUSEPORT_ARRAY which allows a SO_REUSEPORT sk to be added to a bpf map. When a sk is removed from reuse->socks[], it also needs to be removed from the bpf map. Also, when adding a sk to a bpf map, the bpf map needs to ensure it is indeed in a reuse->socks[]. Hence, reuseport_lock is needed by the bpf map to ensure its map_update_elem() and map_delete_elem() operations are in-sync with the reuse->socks[]. The BPF_MAP_TYPE_REUSEPORT_ARRAY map will only acquire the reuseport_lock after ensuring the adding sk is already in a reuseport group (i.e. reuse->socks[]). The map_lookup_elem() will be lockless. This patch also adds an ID to sock_reuseport. A later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT which allows a bpf prog to select a sk from a bpf map. It is inflexible to statically enforce a bpf map can only contain the sk belonging to a particular reuse->socks[] (i.e. same IP:PORT) during the bpf verification time. For example, think about the the map-in-map situation where the inner map can be dynamically changed in runtime and the outer map may have inner maps belonging to different reuseport groups. Hence, when the bpf prog (in the new BPF_PROG_TYPE_SK_REUSEPORT type) selects a sk, this selected sk has to be checked to ensure it belongs to the requesting reuseport group (i.e. the group serving that IP:PORT). The "sk->sk_reuseport_cb" pointer cannot be used for this checking purpose because the pointer value will change after reuseport_grow(). Instead of saving all checking conditions like the ones preced calling "reuseport_add_sock()" and compare them everytime a bpf_prog is run, a 32bits ID is introduced to survive the reuseport_grow(). The ID is only acquired if any of the reuse->socks[] is added to the newly introduced "BPF_MAP_TYPE_REUSEPORT_ARRAY" map. If "BPF_MAP_TYPE_REUSEPORT_ARRAY" is not used, the changes in this patch is a no-op. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:22 +08:00
DEFINE_SPINLOCK(reuseport_lock);
static DEFINE_IDA(reuseport_ida);
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
static int reuseport_resurrect(struct sock *sk, struct sock_reuseport *old_reuse,
struct sock_reuseport *reuse, bool bind_inany);
net: Add ID (if needed) to sock_reuseport and expose reuseport_lock A later patch will introduce a BPF_MAP_TYPE_REUSEPORT_ARRAY which allows a SO_REUSEPORT sk to be added to a bpf map. When a sk is removed from reuse->socks[], it also needs to be removed from the bpf map. Also, when adding a sk to a bpf map, the bpf map needs to ensure it is indeed in a reuse->socks[]. Hence, reuseport_lock is needed by the bpf map to ensure its map_update_elem() and map_delete_elem() operations are in-sync with the reuse->socks[]. The BPF_MAP_TYPE_REUSEPORT_ARRAY map will only acquire the reuseport_lock after ensuring the adding sk is already in a reuseport group (i.e. reuse->socks[]). The map_lookup_elem() will be lockless. This patch also adds an ID to sock_reuseport. A later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT which allows a bpf prog to select a sk from a bpf map. It is inflexible to statically enforce a bpf map can only contain the sk belonging to a particular reuse->socks[] (i.e. same IP:PORT) during the bpf verification time. For example, think about the the map-in-map situation where the inner map can be dynamically changed in runtime and the outer map may have inner maps belonging to different reuseport groups. Hence, when the bpf prog (in the new BPF_PROG_TYPE_SK_REUSEPORT type) selects a sk, this selected sk has to be checked to ensure it belongs to the requesting reuseport group (i.e. the group serving that IP:PORT). The "sk->sk_reuseport_cb" pointer cannot be used for this checking purpose because the pointer value will change after reuseport_grow(). Instead of saving all checking conditions like the ones preced calling "reuseport_add_sock()" and compare them everytime a bpf_prog is run, a 32bits ID is introduced to survive the reuseport_grow(). The ID is only acquired if any of the reuse->socks[] is added to the newly introduced "BPF_MAP_TYPE_REUSEPORT_ARRAY" map. If "BPF_MAP_TYPE_REUSEPORT_ARRAY" is not used, the changes in this patch is a no-op. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:22 +08:00
static int reuseport_sock_index(struct sock *sk,
const struct sock_reuseport *reuse,
bool closed)
{
int left, right;
if (!closed) {
left = 0;
right = reuse->num_socks;
} else {
left = reuse->max_socks - reuse->num_closed_socks;
right = reuse->max_socks;
}
for (; left < right; left++)
if (reuse->socks[left] == sk)
return left;
return -1;
}
static void __reuseport_add_sock(struct sock *sk,
struct sock_reuseport *reuse)
{
reuse->socks[reuse->num_socks] = sk;
/* paired with smp_rmb() in reuseport_(select|migrate)_sock() */
smp_wmb();
reuse->num_socks++;
}
static bool __reuseport_detach_sock(struct sock *sk,
struct sock_reuseport *reuse)
{
int i = reuseport_sock_index(sk, reuse, false);
if (i == -1)
return false;
reuse->socks[i] = reuse->socks[reuse->num_socks - 1];
reuse->num_socks--;
return true;
}
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
static void __reuseport_add_closed_sock(struct sock *sk,
struct sock_reuseport *reuse)
{
reuse->socks[reuse->max_socks - reuse->num_closed_socks - 1] = sk;
/* paired with READ_ONCE() in inet_csk_bind_conflict() */
WRITE_ONCE(reuse->num_closed_socks, reuse->num_closed_socks + 1);
}
static bool __reuseport_detach_closed_sock(struct sock *sk,
struct sock_reuseport *reuse)
{
int i = reuseport_sock_index(sk, reuse, true);
if (i == -1)
return false;
reuse->socks[i] = reuse->socks[reuse->max_socks - reuse->num_closed_socks];
/* paired with READ_ONCE() in inet_csk_bind_conflict() */
WRITE_ONCE(reuse->num_closed_socks, reuse->num_closed_socks - 1);
return true;
}
static struct sock_reuseport *__reuseport_alloc(unsigned int max_socks)
{
unsigned int size = sizeof(struct sock_reuseport) +
sizeof(struct sock *) * max_socks;
struct sock_reuseport *reuse = kzalloc(size, GFP_ATOMIC);
if (!reuse)
return NULL;
reuse->max_socks = max_socks;
RCU_INIT_POINTER(reuse->prog, NULL);
return reuse;
}
bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:25 +08:00
int reuseport_alloc(struct sock *sk, bool bind_inany)
{
struct sock_reuseport *reuse;
net: Generate reuseport group ID on group creation Commit 736b46027eb4 ("net: Add ID (if needed) to sock_reuseport and expose reuseport_lock") has introduced lazy generation of reuseport group IDs that survive group resize. By comparing the identifier we check if BPF reuseport program is not trying to select a socket from a BPF map that belongs to a different reuseport group than the one the packet is for. Because SOCKARRAY used to be the only BPF map type that can be used with reuseport BPF, it was possible to delay the generation of reuseport group ID until a socket from the group was inserted into BPF map for the first time. Now that SOCK{MAP,HASH} can be used with reuseport BPF we have two options, either generate the reuseport ID on map update, like SOCKARRAY does, or allocate an ID from the start when reuseport group gets created. This patch takes the latter approach to keep sockmap free of calls into reuseport code. This streamlines the reuseport_id access as its lifetime now matches the longevity of reuseport object. The cost of this simplification, however, is that we allocate reuseport IDs for all SO_REUSEPORT users. Even those that don't use SOCKARRAY in their setups. With the way identifiers are currently generated, we can have at most S32_MAX reuseport groups, which hopefully is sufficient. If we ever get close to the limit, we can switch an u64 counter like sk_cookie. Another change is that we now always call into SOCKARRAY logic to unlink the socket from the map when unhashing or closing the socket. Previously we did it only when at least one socket from the group was in a BPF map. It is worth noting that this doesn't conflict with sockmap tear-down in case a socket is in a SOCK{MAP,HASH} and belongs to a reuseport group. sockmap tear-down happens first: prot->unhash `- tcp_bpf_unhash |- tcp_bpf_remove | `- while (sk_psock_link_pop(psock)) | `- sk_psock_unlink | `- sock_map_delete_from_link | `- __sock_map_delete | `- sock_map_unref | `- sk_psock_put | `- sk_psock_drop | `- rcu_assign_sk_user_data(sk, NULL) `- inet_unhash `- reuseport_detach_sock `- bpf_sk_reuseport_detach `- WRITE_ONCE(sk->sk_user_data, NULL) Suggested-by: Martin Lau <kafai@fb.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200218171023.844439-10-jakub@cloudflare.com
2020-02-19 01:10:21 +08:00
int id, ret = 0;
/* bh lock used since this function call may precede hlist lock in
* soft irq of receive path or setsockopt from process context
*/
spin_lock_bh(&reuseport_lock);
/* Allocation attempts can occur concurrently via the setsockopt path
* and the bind/hash path. Nothing to do when we lose the race.
*/
bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:25 +08:00
reuse = rcu_dereference_protected(sk->sk_reuseport_cb,
lockdep_is_held(&reuseport_lock));
if (reuse) {
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
if (reuse->num_closed_socks) {
/* sk was shutdown()ed before */
ret = reuseport_resurrect(sk, reuse, NULL, bind_inany);
goto out;
}
bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:25 +08:00
/* Only set reuse->bind_inany if the bind_inany is true.
* Otherwise, it will overwrite the reuse->bind_inany
* which was set by the bind/hash path.
*/
if (bind_inany)
reuse->bind_inany = bind_inany;
goto out;
bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:25 +08:00
}
reuse = __reuseport_alloc(INIT_SOCKS);
if (!reuse) {
net: Generate reuseport group ID on group creation Commit 736b46027eb4 ("net: Add ID (if needed) to sock_reuseport and expose reuseport_lock") has introduced lazy generation of reuseport group IDs that survive group resize. By comparing the identifier we check if BPF reuseport program is not trying to select a socket from a BPF map that belongs to a different reuseport group than the one the packet is for. Because SOCKARRAY used to be the only BPF map type that can be used with reuseport BPF, it was possible to delay the generation of reuseport group ID until a socket from the group was inserted into BPF map for the first time. Now that SOCK{MAP,HASH} can be used with reuseport BPF we have two options, either generate the reuseport ID on map update, like SOCKARRAY does, or allocate an ID from the start when reuseport group gets created. This patch takes the latter approach to keep sockmap free of calls into reuseport code. This streamlines the reuseport_id access as its lifetime now matches the longevity of reuseport object. The cost of this simplification, however, is that we allocate reuseport IDs for all SO_REUSEPORT users. Even those that don't use SOCKARRAY in their setups. With the way identifiers are currently generated, we can have at most S32_MAX reuseport groups, which hopefully is sufficient. If we ever get close to the limit, we can switch an u64 counter like sk_cookie. Another change is that we now always call into SOCKARRAY logic to unlink the socket from the map when unhashing or closing the socket. Previously we did it only when at least one socket from the group was in a BPF map. It is worth noting that this doesn't conflict with sockmap tear-down in case a socket is in a SOCK{MAP,HASH} and belongs to a reuseport group. sockmap tear-down happens first: prot->unhash `- tcp_bpf_unhash |- tcp_bpf_remove | `- while (sk_psock_link_pop(psock)) | `- sk_psock_unlink | `- sock_map_delete_from_link | `- __sock_map_delete | `- sock_map_unref | `- sk_psock_put | `- sk_psock_drop | `- rcu_assign_sk_user_data(sk, NULL) `- inet_unhash `- reuseport_detach_sock `- bpf_sk_reuseport_detach `- WRITE_ONCE(sk->sk_user_data, NULL) Suggested-by: Martin Lau <kafai@fb.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200218171023.844439-10-jakub@cloudflare.com
2020-02-19 01:10:21 +08:00
ret = -ENOMEM;
goto out;
}
net: Generate reuseport group ID on group creation Commit 736b46027eb4 ("net: Add ID (if needed) to sock_reuseport and expose reuseport_lock") has introduced lazy generation of reuseport group IDs that survive group resize. By comparing the identifier we check if BPF reuseport program is not trying to select a socket from a BPF map that belongs to a different reuseport group than the one the packet is for. Because SOCKARRAY used to be the only BPF map type that can be used with reuseport BPF, it was possible to delay the generation of reuseport group ID until a socket from the group was inserted into BPF map for the first time. Now that SOCK{MAP,HASH} can be used with reuseport BPF we have two options, either generate the reuseport ID on map update, like SOCKARRAY does, or allocate an ID from the start when reuseport group gets created. This patch takes the latter approach to keep sockmap free of calls into reuseport code. This streamlines the reuseport_id access as its lifetime now matches the longevity of reuseport object. The cost of this simplification, however, is that we allocate reuseport IDs for all SO_REUSEPORT users. Even those that don't use SOCKARRAY in their setups. With the way identifiers are currently generated, we can have at most S32_MAX reuseport groups, which hopefully is sufficient. If we ever get close to the limit, we can switch an u64 counter like sk_cookie. Another change is that we now always call into SOCKARRAY logic to unlink the socket from the map when unhashing or closing the socket. Previously we did it only when at least one socket from the group was in a BPF map. It is worth noting that this doesn't conflict with sockmap tear-down in case a socket is in a SOCK{MAP,HASH} and belongs to a reuseport group. sockmap tear-down happens first: prot->unhash `- tcp_bpf_unhash |- tcp_bpf_remove | `- while (sk_psock_link_pop(psock)) | `- sk_psock_unlink | `- sock_map_delete_from_link | `- __sock_map_delete | `- sock_map_unref | `- sk_psock_put | `- sk_psock_drop | `- rcu_assign_sk_user_data(sk, NULL) `- inet_unhash `- reuseport_detach_sock `- bpf_sk_reuseport_detach `- WRITE_ONCE(sk->sk_user_data, NULL) Suggested-by: Martin Lau <kafai@fb.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200218171023.844439-10-jakub@cloudflare.com
2020-02-19 01:10:21 +08:00
id = ida_alloc(&reuseport_ida, GFP_ATOMIC);
if (id < 0) {
kfree(reuse);
ret = id;
goto out;
}
reuse->reuseport_id = id;
reuse->bind_inany = bind_inany;
reuse->socks[0] = sk;
reuse->num_socks = 1;
rcu_assign_pointer(sk->sk_reuseport_cb, reuse);
out:
spin_unlock_bh(&reuseport_lock);
net: Generate reuseport group ID on group creation Commit 736b46027eb4 ("net: Add ID (if needed) to sock_reuseport and expose reuseport_lock") has introduced lazy generation of reuseport group IDs that survive group resize. By comparing the identifier we check if BPF reuseport program is not trying to select a socket from a BPF map that belongs to a different reuseport group than the one the packet is for. Because SOCKARRAY used to be the only BPF map type that can be used with reuseport BPF, it was possible to delay the generation of reuseport group ID until a socket from the group was inserted into BPF map for the first time. Now that SOCK{MAP,HASH} can be used with reuseport BPF we have two options, either generate the reuseport ID on map update, like SOCKARRAY does, or allocate an ID from the start when reuseport group gets created. This patch takes the latter approach to keep sockmap free of calls into reuseport code. This streamlines the reuseport_id access as its lifetime now matches the longevity of reuseport object. The cost of this simplification, however, is that we allocate reuseport IDs for all SO_REUSEPORT users. Even those that don't use SOCKARRAY in their setups. With the way identifiers are currently generated, we can have at most S32_MAX reuseport groups, which hopefully is sufficient. If we ever get close to the limit, we can switch an u64 counter like sk_cookie. Another change is that we now always call into SOCKARRAY logic to unlink the socket from the map when unhashing or closing the socket. Previously we did it only when at least one socket from the group was in a BPF map. It is worth noting that this doesn't conflict with sockmap tear-down in case a socket is in a SOCK{MAP,HASH} and belongs to a reuseport group. sockmap tear-down happens first: prot->unhash `- tcp_bpf_unhash |- tcp_bpf_remove | `- while (sk_psock_link_pop(psock)) | `- sk_psock_unlink | `- sock_map_delete_from_link | `- __sock_map_delete | `- sock_map_unref | `- sk_psock_put | `- sk_psock_drop | `- rcu_assign_sk_user_data(sk, NULL) `- inet_unhash `- reuseport_detach_sock `- bpf_sk_reuseport_detach `- WRITE_ONCE(sk->sk_user_data, NULL) Suggested-by: Martin Lau <kafai@fb.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200218171023.844439-10-jakub@cloudflare.com
2020-02-19 01:10:21 +08:00
return ret;
}
EXPORT_SYMBOL(reuseport_alloc);
static struct sock_reuseport *reuseport_grow(struct sock_reuseport *reuse)
{
struct sock_reuseport *more_reuse;
u32 more_socks_size, i;
more_socks_size = reuse->max_socks * 2U;
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
if (more_socks_size > U16_MAX) {
if (reuse->num_closed_socks) {
/* Make room by removing a closed sk.
* The child has already been migrated.
* Only reqsk left at this point.
*/
struct sock *sk;
sk = reuse->socks[reuse->max_socks - reuse->num_closed_socks];
RCU_INIT_POINTER(sk->sk_reuseport_cb, NULL);
__reuseport_detach_closed_sock(sk, reuse);
return reuse;
}
return NULL;
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
}
more_reuse = __reuseport_alloc(more_socks_size);
if (!more_reuse)
return NULL;
more_reuse->num_socks = reuse->num_socks;
more_reuse->num_closed_socks = reuse->num_closed_socks;
more_reuse->prog = reuse->prog;
net: Add ID (if needed) to sock_reuseport and expose reuseport_lock A later patch will introduce a BPF_MAP_TYPE_REUSEPORT_ARRAY which allows a SO_REUSEPORT sk to be added to a bpf map. When a sk is removed from reuse->socks[], it also needs to be removed from the bpf map. Also, when adding a sk to a bpf map, the bpf map needs to ensure it is indeed in a reuse->socks[]. Hence, reuseport_lock is needed by the bpf map to ensure its map_update_elem() and map_delete_elem() operations are in-sync with the reuse->socks[]. The BPF_MAP_TYPE_REUSEPORT_ARRAY map will only acquire the reuseport_lock after ensuring the adding sk is already in a reuseport group (i.e. reuse->socks[]). The map_lookup_elem() will be lockless. This patch also adds an ID to sock_reuseport. A later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT which allows a bpf prog to select a sk from a bpf map. It is inflexible to statically enforce a bpf map can only contain the sk belonging to a particular reuse->socks[] (i.e. same IP:PORT) during the bpf verification time. For example, think about the the map-in-map situation where the inner map can be dynamically changed in runtime and the outer map may have inner maps belonging to different reuseport groups. Hence, when the bpf prog (in the new BPF_PROG_TYPE_SK_REUSEPORT type) selects a sk, this selected sk has to be checked to ensure it belongs to the requesting reuseport group (i.e. the group serving that IP:PORT). The "sk->sk_reuseport_cb" pointer cannot be used for this checking purpose because the pointer value will change after reuseport_grow(). Instead of saving all checking conditions like the ones preced calling "reuseport_add_sock()" and compare them everytime a bpf_prog is run, a 32bits ID is introduced to survive the reuseport_grow(). The ID is only acquired if any of the reuse->socks[] is added to the newly introduced "BPF_MAP_TYPE_REUSEPORT_ARRAY" map. If "BPF_MAP_TYPE_REUSEPORT_ARRAY" is not used, the changes in this patch is a no-op. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:22 +08:00
more_reuse->reuseport_id = reuse->reuseport_id;
bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:25 +08:00
more_reuse->bind_inany = reuse->bind_inany;
more_reuse->has_conns = reuse->has_conns;
memcpy(more_reuse->socks, reuse->socks,
reuse->num_socks * sizeof(struct sock *));
memcpy(more_reuse->socks +
(more_reuse->max_socks - more_reuse->num_closed_socks),
reuse->socks + (reuse->max_socks - reuse->num_closed_socks),
reuse->num_closed_socks * sizeof(struct sock *));
tcp: Avoid TCP syncookie rejected by SO_REUSEPORT socket Although the actual cookie check "__cookie_v[46]_check()" does not involve sk specific info, it checks whether the sk has recent synq overflow event in "tcp_synq_no_recent_overflow()". The tcp_sk(sk)->rx_opt.ts_recent_stamp is updated every second when it has sent out a syncookie (through "tcp_synq_overflow()"). The above per sk "recent synq overflow event timestamp" works well for non SO_REUSEPORT use case. However, it may cause random connection request reject/discard when SO_REUSEPORT is used with syncookie because it fails the "tcp_synq_no_recent_overflow()" test. When SO_REUSEPORT is used, it usually has multiple listening socks serving TCP connection requests destinated to the same local IP:PORT. There are cases that the TCP-ACK-COOKIE may not be received by the same sk that sent out the syncookie. For example, if reuse->socks[] began with {sk0, sk1}, 1) sk1 sent out syncookies and tcp_sk(sk1)->rx_opt.ts_recent_stamp was updated. 2) the reuse->socks[] became {sk1, sk2} later. e.g. sk0 was first closed and then sk2 was added. Here, sk2 does not have ts_recent_stamp set. There are other ordering that will trigger the similar situation below but the idea is the same. 3) When the TCP-ACK-COOKIE comes back, sk2 was selected. "tcp_synq_no_recent_overflow(sk2)" returns true. In this case, all syncookies sent by sk1 will be handled (and rejected) by sk2 while sk1 is still alive. The userspace may create and remove listening SO_REUSEPORT sockets as it sees fit. E.g. Adding new thread (and SO_REUSEPORT sock) to handle incoming requests, old process stopping and new process starting...etc. With or without SO_ATTACH_REUSEPORT_[CB]BPF, the sockets leaving and joining a reuseport group makes picking the same sk to check the syncookie very difficult (if not impossible). The later patches will allow bpf prog more flexibility in deciding where a sk should be located in a bpf map and selecting a particular SO_REUSEPORT sock as it sees fit. e.g. Without closing any sock, replace the whole bpf reuseport_array in one map_update() by using map-in-map. Getting the syncookie check working smoothly across socks in the same "reuse->socks[]" is important. A partial solution is to set the newly added sk's ts_recent_stamp to the max ts_recent_stamp of a reuseport group but that will require to iterate through reuse->socks[] OR pessimistically set it to "now - TCP_SYNCOOKIE_VALID" when a sk is joining a reuseport group. However, neither of them will solve the existing sk getting moved around the reuse->socks[] and that sk may not have ts_recent_stamp updated, unlikely under continuous synflood but not impossible. This patch opts to treat the reuseport group as a whole when considering the last synq overflow timestamp since they are serving the same IP:PORT from the userspace (and BPF program) perspective. "synq_overflow_ts" is added to "struct sock_reuseport". The tcp_synq_overflow() and tcp_synq_no_recent_overflow() will update/check reuse->synq_overflow_ts if the sk is in a reuseport group. Similar to the reuseport decision in __inet_lookup_listener(), both sk->sk_reuseport and sk->sk_reuseport_cb are tested for SO_REUSEPORT usage. Update on "synq_overflow_ts" happens at roughly once every second. A synflood test was done with a 16 rx-queues and 16 reuseport sockets. No meaningful performance change is observed. Before and after the change is ~9Mpps in IPv4. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:21 +08:00
more_reuse->synq_overflow_ts = READ_ONCE(reuse->synq_overflow_ts);
for (i = 0; i < reuse->max_socks; ++i)
rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb,
more_reuse);
/* Note: we use kfree_rcu here instead of reuseport_free_rcu so
* that reuse and more_reuse can temporarily share a reference
* to prog.
*/
kfree_rcu(reuse, rcu);
return more_reuse;
}
soreuseport: fix mem leak in reuseport_add_sock() reuseport_add_sock() needs to deal with attaching a socket having its own sk_reuseport_cb, after a prior setsockopt(SO_ATTACH_REUSEPORT_?BPF) Without this fix, not only a WARN_ONCE() was issued, but we were also leaking memory. Thanks to sysbot and Eric Biggers for providing us nice C repros. ------------[ cut here ]------------ socket already in reuseport group WARNING: CPU: 0 PID: 3496 at net/core/sock_reuseport.c:119   reuseport_add_sock+0x742/0x9b0 net/core/sock_reuseport.c:117 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 3496 Comm: syzkaller869503 Not tainted 4.15.0-rc6+ #245 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS   Google 01/01/2011 Call Trace:   __dump_stack lib/dump_stack.c:17 [inline]   dump_stack+0x194/0x257 lib/dump_stack.c:53   panic+0x1e4/0x41c kernel/panic.c:183   __warn+0x1dc/0x200 kernel/panic.c:547   report_bug+0x211/0x2d0 lib/bug.c:184   fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178   fixup_bug arch/x86/kernel/traps.c:247 [inline]   do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296   do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315   invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:1079 Fixes: ef456144da8e ("soreuseport: define reuseport groups") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+c0ea2226f77a42936bf7@syzkaller.appspotmail.com Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-03 02:27:27 +08:00
static void reuseport_free_rcu(struct rcu_head *head)
{
struct sock_reuseport *reuse;
reuse = container_of(head, struct sock_reuseport, rcu);
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:26 +08:00
sk_reuseport_prog_free(rcu_dereference_protected(reuse->prog, 1));
net: Generate reuseport group ID on group creation Commit 736b46027eb4 ("net: Add ID (if needed) to sock_reuseport and expose reuseport_lock") has introduced lazy generation of reuseport group IDs that survive group resize. By comparing the identifier we check if BPF reuseport program is not trying to select a socket from a BPF map that belongs to a different reuseport group than the one the packet is for. Because SOCKARRAY used to be the only BPF map type that can be used with reuseport BPF, it was possible to delay the generation of reuseport group ID until a socket from the group was inserted into BPF map for the first time. Now that SOCK{MAP,HASH} can be used with reuseport BPF we have two options, either generate the reuseport ID on map update, like SOCKARRAY does, or allocate an ID from the start when reuseport group gets created. This patch takes the latter approach to keep sockmap free of calls into reuseport code. This streamlines the reuseport_id access as its lifetime now matches the longevity of reuseport object. The cost of this simplification, however, is that we allocate reuseport IDs for all SO_REUSEPORT users. Even those that don't use SOCKARRAY in their setups. With the way identifiers are currently generated, we can have at most S32_MAX reuseport groups, which hopefully is sufficient. If we ever get close to the limit, we can switch an u64 counter like sk_cookie. Another change is that we now always call into SOCKARRAY logic to unlink the socket from the map when unhashing or closing the socket. Previously we did it only when at least one socket from the group was in a BPF map. It is worth noting that this doesn't conflict with sockmap tear-down in case a socket is in a SOCK{MAP,HASH} and belongs to a reuseport group. sockmap tear-down happens first: prot->unhash `- tcp_bpf_unhash |- tcp_bpf_remove | `- while (sk_psock_link_pop(psock)) | `- sk_psock_unlink | `- sock_map_delete_from_link | `- __sock_map_delete | `- sock_map_unref | `- sk_psock_put | `- sk_psock_drop | `- rcu_assign_sk_user_data(sk, NULL) `- inet_unhash `- reuseport_detach_sock `- bpf_sk_reuseport_detach `- WRITE_ONCE(sk->sk_user_data, NULL) Suggested-by: Martin Lau <kafai@fb.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200218171023.844439-10-jakub@cloudflare.com
2020-02-19 01:10:21 +08:00
ida_free(&reuseport_ida, reuse->reuseport_id);
soreuseport: fix mem leak in reuseport_add_sock() reuseport_add_sock() needs to deal with attaching a socket having its own sk_reuseport_cb, after a prior setsockopt(SO_ATTACH_REUSEPORT_?BPF) Without this fix, not only a WARN_ONCE() was issued, but we were also leaking memory. Thanks to sysbot and Eric Biggers for providing us nice C repros. ------------[ cut here ]------------ socket already in reuseport group WARNING: CPU: 0 PID: 3496 at net/core/sock_reuseport.c:119   reuseport_add_sock+0x742/0x9b0 net/core/sock_reuseport.c:117 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 3496 Comm: syzkaller869503 Not tainted 4.15.0-rc6+ #245 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS   Google 01/01/2011 Call Trace:   __dump_stack lib/dump_stack.c:17 [inline]   dump_stack+0x194/0x257 lib/dump_stack.c:53   panic+0x1e4/0x41c kernel/panic.c:183   __warn+0x1dc/0x200 kernel/panic.c:547   report_bug+0x211/0x2d0 lib/bug.c:184   fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178   fixup_bug arch/x86/kernel/traps.c:247 [inline]   do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296   do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315   invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:1079 Fixes: ef456144da8e ("soreuseport: define reuseport groups") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+c0ea2226f77a42936bf7@syzkaller.appspotmail.com Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-03 02:27:27 +08:00
kfree(reuse);
}
/**
* reuseport_add_sock - Add a socket to the reuseport group of another.
* @sk: New socket to add to the group.
* @sk2: Socket belonging to the existing reuseport group.
* @bind_inany: Whether or not the group is bound to a local INANY address.
*
* May return ENOMEM and not add socket to group under memory pressure.
*/
bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:25 +08:00
int reuseport_add_sock(struct sock *sk, struct sock *sk2, bool bind_inany)
{
soreuseport: fix mem leak in reuseport_add_sock() reuseport_add_sock() needs to deal with attaching a socket having its own sk_reuseport_cb, after a prior setsockopt(SO_ATTACH_REUSEPORT_?BPF) Without this fix, not only a WARN_ONCE() was issued, but we were also leaking memory. Thanks to sysbot and Eric Biggers for providing us nice C repros. ------------[ cut here ]------------ socket already in reuseport group WARNING: CPU: 0 PID: 3496 at net/core/sock_reuseport.c:119   reuseport_add_sock+0x742/0x9b0 net/core/sock_reuseport.c:117 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 3496 Comm: syzkaller869503 Not tainted 4.15.0-rc6+ #245 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS   Google 01/01/2011 Call Trace:   __dump_stack lib/dump_stack.c:17 [inline]   dump_stack+0x194/0x257 lib/dump_stack.c:53   panic+0x1e4/0x41c kernel/panic.c:183   __warn+0x1dc/0x200 kernel/panic.c:547   report_bug+0x211/0x2d0 lib/bug.c:184   fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178   fixup_bug arch/x86/kernel/traps.c:247 [inline]   do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296   do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315   invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:1079 Fixes: ef456144da8e ("soreuseport: define reuseport groups") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+c0ea2226f77a42936bf7@syzkaller.appspotmail.com Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-03 02:27:27 +08:00
struct sock_reuseport *old_reuse, *reuse;
if (!rcu_access_pointer(sk2->sk_reuseport_cb)) {
bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN. BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern" to store the bpf context instead of using the skb->cb[48]. At the SO_REUSEPORT sk lookup time, it is in the middle of transiting from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this point, it is not always clear where the bpf context can be appended in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not clear if the lower layer is only ipv4 and ipv6 in the future and will it not touch the cb[] again before transiting to the upper layer. For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB instead of IP[6]CB and it may still modify the cb[] after calling the udp[46]_lib_lookup_skb(). Because of the above reason, if sk->cb is used for the bpf ctx, saving-and-restoring is needed and likely the whole 48 bytes cb[] has to be saved and restored. Instead of saving, setting and restoring the cb[], this patch opts to create a new "struct sk_reuseport_kern" and setting the needed values in there. The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)" will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol specific usage at this point and it is also inline with the current sock_reuseport.c implementation (i.e. no protocol specific requirement). In "struct sk_reuseport_md", this patch exposes data/data_end/len with semantic similar to other existing usages. Together with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()", the bpf prog can peek anywhere in the skb. The "bind_inany" tells the bpf prog that the reuseport group is bind-ed to a local INANY address which cannot be learned from skb. The new "bind_inany" is added to "struct sock_reuseport" which will be used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order to avoid repeating the "bind INANY" test on "sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can only be properly initialized when a "sk->sk_reuseport" enabled sk is adding to a hashtable (i.e. during "reuseport_alloc()" and "reuseport_add_sock()"). The new "sk_select_reuseport()" is the main helper that the bpf prog will use to select a SO_REUSEPORT sk. It is the only function that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in the earlier patch, the validity of a selected sk is checked in run time in "sk_select_reuseport()". Doing the check in verification time is difficult and inflexible (consider the map-in-map use case). The runtime check is to compare the selected sk's reuseport_id with the reuseport_id that we want. This helper will return -EXXX if the selected sk cannot serve the incoming request (e.g. reuseport_id not match). The bpf prog can decide if it wants to do SK_DROP as its discretion. When the bpf prog returns SK_PASS, the kernel will check if a valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL"). If it does , it will use the selected sk. If not, the kernel will select one from "reuse->socks[]" (as before this patch). The SK_DROP and SK_PASS handling logic will be in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:25 +08:00
int err = reuseport_alloc(sk2, bind_inany);
if (err)
return err;
}
spin_lock_bh(&reuseport_lock);
reuse = rcu_dereference_protected(sk2->sk_reuseport_cb,
soreuseport: fix mem leak in reuseport_add_sock() reuseport_add_sock() needs to deal with attaching a socket having its own sk_reuseport_cb, after a prior setsockopt(SO_ATTACH_REUSEPORT_?BPF) Without this fix, not only a WARN_ONCE() was issued, but we were also leaking memory. Thanks to sysbot and Eric Biggers for providing us nice C repros. ------------[ cut here ]------------ socket already in reuseport group WARNING: CPU: 0 PID: 3496 at net/core/sock_reuseport.c:119   reuseport_add_sock+0x742/0x9b0 net/core/sock_reuseport.c:117 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 3496 Comm: syzkaller869503 Not tainted 4.15.0-rc6+ #245 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS   Google 01/01/2011 Call Trace:   __dump_stack lib/dump_stack.c:17 [inline]   dump_stack+0x194/0x257 lib/dump_stack.c:53   panic+0x1e4/0x41c kernel/panic.c:183   __warn+0x1dc/0x200 kernel/panic.c:547   report_bug+0x211/0x2d0 lib/bug.c:184   fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178   fixup_bug arch/x86/kernel/traps.c:247 [inline]   do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296   do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315   invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:1079 Fixes: ef456144da8e ("soreuseport: define reuseport groups") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+c0ea2226f77a42936bf7@syzkaller.appspotmail.com Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-03 02:27:27 +08:00
lockdep_is_held(&reuseport_lock));
old_reuse = rcu_dereference_protected(sk->sk_reuseport_cb,
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
lockdep_is_held(&reuseport_lock));
if (old_reuse && old_reuse->num_closed_socks) {
/* sk was shutdown()ed before */
int err = reuseport_resurrect(sk, old_reuse, reuse, reuse->bind_inany);
spin_unlock_bh(&reuseport_lock);
return err;
}
soreuseport: fix mem leak in reuseport_add_sock() reuseport_add_sock() needs to deal with attaching a socket having its own sk_reuseport_cb, after a prior setsockopt(SO_ATTACH_REUSEPORT_?BPF) Without this fix, not only a WARN_ONCE() was issued, but we were also leaking memory. Thanks to sysbot and Eric Biggers for providing us nice C repros. ------------[ cut here ]------------ socket already in reuseport group WARNING: CPU: 0 PID: 3496 at net/core/sock_reuseport.c:119   reuseport_add_sock+0x742/0x9b0 net/core/sock_reuseport.c:117 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 3496 Comm: syzkaller869503 Not tainted 4.15.0-rc6+ #245 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS   Google 01/01/2011 Call Trace:   __dump_stack lib/dump_stack.c:17 [inline]   dump_stack+0x194/0x257 lib/dump_stack.c:53   panic+0x1e4/0x41c kernel/panic.c:183   __warn+0x1dc/0x200 kernel/panic.c:547   report_bug+0x211/0x2d0 lib/bug.c:184   fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178   fixup_bug arch/x86/kernel/traps.c:247 [inline]   do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296   do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315   invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:1079 Fixes: ef456144da8e ("soreuseport: define reuseport groups") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+c0ea2226f77a42936bf7@syzkaller.appspotmail.com Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-03 02:27:27 +08:00
if (old_reuse && old_reuse->num_socks != 1) {
spin_unlock_bh(&reuseport_lock);
return -EBUSY;
}
if (reuse->num_socks + reuse->num_closed_socks == reuse->max_socks) {
reuse = reuseport_grow(reuse);
if (!reuse) {
spin_unlock_bh(&reuseport_lock);
return -ENOMEM;
}
}
__reuseport_add_sock(sk, reuse);
rcu_assign_pointer(sk->sk_reuseport_cb, reuse);
spin_unlock_bh(&reuseport_lock);
soreuseport: fix mem leak in reuseport_add_sock() reuseport_add_sock() needs to deal with attaching a socket having its own sk_reuseport_cb, after a prior setsockopt(SO_ATTACH_REUSEPORT_?BPF) Without this fix, not only a WARN_ONCE() was issued, but we were also leaking memory. Thanks to sysbot and Eric Biggers for providing us nice C repros. ------------[ cut here ]------------ socket already in reuseport group WARNING: CPU: 0 PID: 3496 at net/core/sock_reuseport.c:119   reuseport_add_sock+0x742/0x9b0 net/core/sock_reuseport.c:117 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 3496 Comm: syzkaller869503 Not tainted 4.15.0-rc6+ #245 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS   Google 01/01/2011 Call Trace:   __dump_stack lib/dump_stack.c:17 [inline]   dump_stack+0x194/0x257 lib/dump_stack.c:53   panic+0x1e4/0x41c kernel/panic.c:183   __warn+0x1dc/0x200 kernel/panic.c:547   report_bug+0x211/0x2d0 lib/bug.c:184   fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178   fixup_bug arch/x86/kernel/traps.c:247 [inline]   do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296   do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315   invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:1079 Fixes: ef456144da8e ("soreuseport: define reuseport groups") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+c0ea2226f77a42936bf7@syzkaller.appspotmail.com Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-03 02:27:27 +08:00
if (old_reuse)
call_rcu(&old_reuse->rcu, reuseport_free_rcu);
return 0;
}
EXPORT_SYMBOL(reuseport_add_sock);
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
static int reuseport_resurrect(struct sock *sk, struct sock_reuseport *old_reuse,
struct sock_reuseport *reuse, bool bind_inany)
{
if (old_reuse == reuse) {
/* If sk was in the same reuseport group, just pop sk out of
* the closed section and push sk into the listening section.
*/
__reuseport_detach_closed_sock(sk, old_reuse);
__reuseport_add_sock(sk, old_reuse);
return 0;
}
if (!reuse) {
/* In bind()/listen() path, we cannot carry over the eBPF prog
* for the shutdown()ed socket. In setsockopt() path, we should
* not change the eBPF prog of listening sockets by attaching a
* prog to the shutdown()ed socket. Thus, we will allocate a new
* reuseport group and detach sk from the old group.
*/
int id;
reuse = __reuseport_alloc(INIT_SOCKS);
if (!reuse)
return -ENOMEM;
id = ida_alloc(&reuseport_ida, GFP_ATOMIC);
if (id < 0) {
kfree(reuse);
return id;
}
reuse->reuseport_id = id;
reuse->bind_inany = bind_inany;
} else {
/* Move sk from the old group to the new one if
* - all the other listeners in the old group were close()d or
* shutdown()ed, and then sk2 has listen()ed on the same port
* OR
* - sk listen()ed without bind() (or with autobind), was
* shutdown()ed, and then listen()s on another port which
* sk2 listen()s on.
*/
if (reuse->num_socks + reuse->num_closed_socks == reuse->max_socks) {
reuse = reuseport_grow(reuse);
if (!reuse)
return -ENOMEM;
}
}
__reuseport_detach_closed_sock(sk, old_reuse);
__reuseport_add_sock(sk, reuse);
rcu_assign_pointer(sk->sk_reuseport_cb, reuse);
if (old_reuse->num_socks + old_reuse->num_closed_socks == 0)
call_rcu(&old_reuse->rcu, reuseport_free_rcu);
return 0;
}
void reuseport_detach_sock(struct sock *sk)
{
struct sock_reuseport *reuse;
spin_lock_bh(&reuseport_lock);
reuse = rcu_dereference_protected(sk->sk_reuseport_cb,
lockdep_is_held(&reuseport_lock));
bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY This patch introduces a new map type BPF_MAP_TYPE_REUSEPORT_SOCKARRAY. To unleash the full potential of a bpf prog, it is essential for the userspace to be capable of directly setting up a bpf map which can then be consumed by the bpf prog to make decision. In this case, decide which SO_REUSEPORT sk to serve the incoming request. By adding BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, the userspace has total control and visibility on where a SO_REUSEPORT sk should be located in a bpf map. The later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT such that the bpf prog can directly select a sk from the bpf map. That will raise the programmability of the bpf prog attached to a reuseport group (a group of sk serving the same IP:PORT). For example, in UDP, the bpf prog can peek into the payload (e.g. through the "data" pointer introduced in the later patch) to learn the application level's connection information and then decide which sk to pick from a bpf map. The userspace can tightly couple the sk's location in a bpf map with the application logic in generating the UDP payload's connection information. This connection info contact/API stays within the userspace. Also, when used with map-in-map, the userspace can switch the old-server-process's inner map to a new-server-process's inner map in one call "bpf_map_update_elem(outer_map, &index, &new_reuseport_array)". The bpf prog will then direct incoming requests to the new process instead of the old process. The old process can finish draining the pending requests (e.g. by "accept()") before closing the old-fds. [Note that deleting a fd from a bpf map does not necessary mean the fd is closed] During map_update_elem(), Only SO_REUSEPORT sk (i.e. which has already been added to a reuse->socks[]) can be used. That means a SO_REUSEPORT sk that is "bind()" for UDP or "bind()+listen()" for TCP. These conditions are ensured in "reuseport_array_update_check()". A SO_REUSEPORT sk can only be added once to a map (i.e. the same sk cannot be added twice even to the same map). SO_REUSEPORT already allows another sk to be created for the same IP:PORT. There is no need to re-create a similar usage in the BPF side. When a SO_REUSEPORT is deleted from the "reuse->socks[]" (e.g. "close()"), it will notify the bpf map to remove it from the map also. It is done through "bpf_sk_reuseport_detach()" and it will only be called if >=1 of the "reuse->sock[]" has ever been added to a bpf map. The map_update()/map_delete() has to be in-sync with the "reuse->socks[]". Hence, the same "reuseport_lock" used by "reuse->socks[]" has to be used here also. Care has been taken to ensure the lock is only acquired when the adding sk passes some strict tests. and freeing the map does not require the reuseport_lock. The reuseport_array will also support lookup from the syscall side. It will return a sock_gen_cookie(). The sock_gen_cookie() is on-demand (i.e. a sk's cookie is not generated until the very first map_lookup_elem()). The lookup cookie is 64bits but it goes against the logical userspace expectation on 32bits sizeof(fd) (and as other fd based bpf maps do also). It may catch user in surprise if we enforce value_size=8 while userspace still pass a 32bits fd during update. Supporting different value_size between lookup and update seems unintuitive also. We also need to consider what if other existing fd based maps want to return 64bits value from syscall's lookup in the future. Hence, reuseport_array supports both value_size 4 and 8, and assuming user will usually use value_size=4. The syscall's lookup will return ENOSPC on value_size=4. It will will only return 64bits value from sock_gen_cookie() when user consciously choose value_size=8 (as a signal that lookup is desired) which then requires a 64bits value in both lookup and update. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:24 +08:00
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
/* reuseport_grow() has detached a closed sk */
if (!reuse)
goto out;
net: Generate reuseport group ID on group creation Commit 736b46027eb4 ("net: Add ID (if needed) to sock_reuseport and expose reuseport_lock") has introduced lazy generation of reuseport group IDs that survive group resize. By comparing the identifier we check if BPF reuseport program is not trying to select a socket from a BPF map that belongs to a different reuseport group than the one the packet is for. Because SOCKARRAY used to be the only BPF map type that can be used with reuseport BPF, it was possible to delay the generation of reuseport group ID until a socket from the group was inserted into BPF map for the first time. Now that SOCK{MAP,HASH} can be used with reuseport BPF we have two options, either generate the reuseport ID on map update, like SOCKARRAY does, or allocate an ID from the start when reuseport group gets created. This patch takes the latter approach to keep sockmap free of calls into reuseport code. This streamlines the reuseport_id access as its lifetime now matches the longevity of reuseport object. The cost of this simplification, however, is that we allocate reuseport IDs for all SO_REUSEPORT users. Even those that don't use SOCKARRAY in their setups. With the way identifiers are currently generated, we can have at most S32_MAX reuseport groups, which hopefully is sufficient. If we ever get close to the limit, we can switch an u64 counter like sk_cookie. Another change is that we now always call into SOCKARRAY logic to unlink the socket from the map when unhashing or closing the socket. Previously we did it only when at least one socket from the group was in a BPF map. It is worth noting that this doesn't conflict with sockmap tear-down in case a socket is in a SOCK{MAP,HASH} and belongs to a reuseport group. sockmap tear-down happens first: prot->unhash `- tcp_bpf_unhash |- tcp_bpf_remove | `- while (sk_psock_link_pop(psock)) | `- sk_psock_unlink | `- sock_map_delete_from_link | `- __sock_map_delete | `- sock_map_unref | `- sk_psock_put | `- sk_psock_drop | `- rcu_assign_sk_user_data(sk, NULL) `- inet_unhash `- reuseport_detach_sock `- bpf_sk_reuseport_detach `- WRITE_ONCE(sk->sk_user_data, NULL) Suggested-by: Martin Lau <kafai@fb.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200218171023.844439-10-jakub@cloudflare.com
2020-02-19 01:10:21 +08:00
/* Notify the bpf side. The sk may be added to a sockarray
* map. If so, sockarray logic will remove it from the map.
*
* Other bpf map types that work with reuseport, like sockmap,
* don't need an explicit callback from here. They override sk
* unhash/close ops to remove the sk from the map before we
* get to this point.
bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY This patch introduces a new map type BPF_MAP_TYPE_REUSEPORT_SOCKARRAY. To unleash the full potential of a bpf prog, it is essential for the userspace to be capable of directly setting up a bpf map which can then be consumed by the bpf prog to make decision. In this case, decide which SO_REUSEPORT sk to serve the incoming request. By adding BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, the userspace has total control and visibility on where a SO_REUSEPORT sk should be located in a bpf map. The later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT such that the bpf prog can directly select a sk from the bpf map. That will raise the programmability of the bpf prog attached to a reuseport group (a group of sk serving the same IP:PORT). For example, in UDP, the bpf prog can peek into the payload (e.g. through the "data" pointer introduced in the later patch) to learn the application level's connection information and then decide which sk to pick from a bpf map. The userspace can tightly couple the sk's location in a bpf map with the application logic in generating the UDP payload's connection information. This connection info contact/API stays within the userspace. Also, when used with map-in-map, the userspace can switch the old-server-process's inner map to a new-server-process's inner map in one call "bpf_map_update_elem(outer_map, &index, &new_reuseport_array)". The bpf prog will then direct incoming requests to the new process instead of the old process. The old process can finish draining the pending requests (e.g. by "accept()") before closing the old-fds. [Note that deleting a fd from a bpf map does not necessary mean the fd is closed] During map_update_elem(), Only SO_REUSEPORT sk (i.e. which has already been added to a reuse->socks[]) can be used. That means a SO_REUSEPORT sk that is "bind()" for UDP or "bind()+listen()" for TCP. These conditions are ensured in "reuseport_array_update_check()". A SO_REUSEPORT sk can only be added once to a map (i.e. the same sk cannot be added twice even to the same map). SO_REUSEPORT already allows another sk to be created for the same IP:PORT. There is no need to re-create a similar usage in the BPF side. When a SO_REUSEPORT is deleted from the "reuse->socks[]" (e.g. "close()"), it will notify the bpf map to remove it from the map also. It is done through "bpf_sk_reuseport_detach()" and it will only be called if >=1 of the "reuse->sock[]" has ever been added to a bpf map. The map_update()/map_delete() has to be in-sync with the "reuse->socks[]". Hence, the same "reuseport_lock" used by "reuse->socks[]" has to be used here also. Care has been taken to ensure the lock is only acquired when the adding sk passes some strict tests. and freeing the map does not require the reuseport_lock. The reuseport_array will also support lookup from the syscall side. It will return a sock_gen_cookie(). The sock_gen_cookie() is on-demand (i.e. a sk's cookie is not generated until the very first map_lookup_elem()). The lookup cookie is 64bits but it goes against the logical userspace expectation on 32bits sizeof(fd) (and as other fd based bpf maps do also). It may catch user in surprise if we enforce value_size=8 while userspace still pass a 32bits fd during update. Supporting different value_size between lookup and update seems unintuitive also. We also need to consider what if other existing fd based maps want to return 64bits value from syscall's lookup in the future. Hence, reuseport_array supports both value_size 4 and 8, and assuming user will usually use value_size=4. The syscall's lookup will return ENOSPC on value_size=4. It will will only return 64bits value from sock_gen_cookie() when user consciously choose value_size=8 (as a signal that lookup is desired) which then requires a 64bits value in both lookup and update. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:24 +08:00
*/
net: Generate reuseport group ID on group creation Commit 736b46027eb4 ("net: Add ID (if needed) to sock_reuseport and expose reuseport_lock") has introduced lazy generation of reuseport group IDs that survive group resize. By comparing the identifier we check if BPF reuseport program is not trying to select a socket from a BPF map that belongs to a different reuseport group than the one the packet is for. Because SOCKARRAY used to be the only BPF map type that can be used with reuseport BPF, it was possible to delay the generation of reuseport group ID until a socket from the group was inserted into BPF map for the first time. Now that SOCK{MAP,HASH} can be used with reuseport BPF we have two options, either generate the reuseport ID on map update, like SOCKARRAY does, or allocate an ID from the start when reuseport group gets created. This patch takes the latter approach to keep sockmap free of calls into reuseport code. This streamlines the reuseport_id access as its lifetime now matches the longevity of reuseport object. The cost of this simplification, however, is that we allocate reuseport IDs for all SO_REUSEPORT users. Even those that don't use SOCKARRAY in their setups. With the way identifiers are currently generated, we can have at most S32_MAX reuseport groups, which hopefully is sufficient. If we ever get close to the limit, we can switch an u64 counter like sk_cookie. Another change is that we now always call into SOCKARRAY logic to unlink the socket from the map when unhashing or closing the socket. Previously we did it only when at least one socket from the group was in a BPF map. It is worth noting that this doesn't conflict with sockmap tear-down in case a socket is in a SOCK{MAP,HASH} and belongs to a reuseport group. sockmap tear-down happens first: prot->unhash `- tcp_bpf_unhash |- tcp_bpf_remove | `- while (sk_psock_link_pop(psock)) | `- sk_psock_unlink | `- sock_map_delete_from_link | `- __sock_map_delete | `- sock_map_unref | `- sk_psock_put | `- sk_psock_drop | `- rcu_assign_sk_user_data(sk, NULL) `- inet_unhash `- reuseport_detach_sock `- bpf_sk_reuseport_detach `- WRITE_ONCE(sk->sk_user_data, NULL) Suggested-by: Martin Lau <kafai@fb.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200218171023.844439-10-jakub@cloudflare.com
2020-02-19 01:10:21 +08:00
bpf_sk_reuseport_detach(sk);
bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY This patch introduces a new map type BPF_MAP_TYPE_REUSEPORT_SOCKARRAY. To unleash the full potential of a bpf prog, it is essential for the userspace to be capable of directly setting up a bpf map which can then be consumed by the bpf prog to make decision. In this case, decide which SO_REUSEPORT sk to serve the incoming request. By adding BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, the userspace has total control and visibility on where a SO_REUSEPORT sk should be located in a bpf map. The later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT such that the bpf prog can directly select a sk from the bpf map. That will raise the programmability of the bpf prog attached to a reuseport group (a group of sk serving the same IP:PORT). For example, in UDP, the bpf prog can peek into the payload (e.g. through the "data" pointer introduced in the later patch) to learn the application level's connection information and then decide which sk to pick from a bpf map. The userspace can tightly couple the sk's location in a bpf map with the application logic in generating the UDP payload's connection information. This connection info contact/API stays within the userspace. Also, when used with map-in-map, the userspace can switch the old-server-process's inner map to a new-server-process's inner map in one call "bpf_map_update_elem(outer_map, &index, &new_reuseport_array)". The bpf prog will then direct incoming requests to the new process instead of the old process. The old process can finish draining the pending requests (e.g. by "accept()") before closing the old-fds. [Note that deleting a fd from a bpf map does not necessary mean the fd is closed] During map_update_elem(), Only SO_REUSEPORT sk (i.e. which has already been added to a reuse->socks[]) can be used. That means a SO_REUSEPORT sk that is "bind()" for UDP or "bind()+listen()" for TCP. These conditions are ensured in "reuseport_array_update_check()". A SO_REUSEPORT sk can only be added once to a map (i.e. the same sk cannot be added twice even to the same map). SO_REUSEPORT already allows another sk to be created for the same IP:PORT. There is no need to re-create a similar usage in the BPF side. When a SO_REUSEPORT is deleted from the "reuse->socks[]" (e.g. "close()"), it will notify the bpf map to remove it from the map also. It is done through "bpf_sk_reuseport_detach()" and it will only be called if >=1 of the "reuse->sock[]" has ever been added to a bpf map. The map_update()/map_delete() has to be in-sync with the "reuse->socks[]". Hence, the same "reuseport_lock" used by "reuse->socks[]" has to be used here also. Care has been taken to ensure the lock is only acquired when the adding sk passes some strict tests. and freeing the map does not require the reuseport_lock. The reuseport_array will also support lookup from the syscall side. It will return a sock_gen_cookie(). The sock_gen_cookie() is on-demand (i.e. a sk's cookie is not generated until the very first map_lookup_elem()). The lookup cookie is 64bits but it goes against the logical userspace expectation on 32bits sizeof(fd) (and as other fd based bpf maps do also). It may catch user in surprise if we enforce value_size=8 while userspace still pass a 32bits fd during update. Supporting different value_size between lookup and update seems unintuitive also. We also need to consider what if other existing fd based maps want to return 64bits value from syscall's lookup in the future. Hence, reuseport_array supports both value_size 4 and 8, and assuming user will usually use value_size=4. The syscall's lookup will return ENOSPC on value_size=4. It will will only return 64bits value from sock_gen_cookie() when user consciously choose value_size=8 (as a signal that lookup is desired) which then requires a 64bits value in both lookup and update. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:24 +08:00
rcu_assign_pointer(sk->sk_reuseport_cb, NULL);
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
if (!__reuseport_detach_closed_sock(sk, reuse))
__reuseport_detach_sock(sk, reuse);
if (reuse->num_socks + reuse->num_closed_socks == 0)
call_rcu(&reuse->rcu, reuseport_free_rcu);
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
out:
spin_unlock_bh(&reuseport_lock);
}
EXPORT_SYMBOL(reuseport_detach_sock);
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
void reuseport_stop_listen_sock(struct sock *sk)
{
if (sk->sk_protocol == IPPROTO_TCP) {
struct sock_reuseport *reuse;
bpf: Support socket migration by eBPF. This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT to check if the attached eBPF program is capable of migrating sockets. When the eBPF program is attached, we run it for socket migration if the expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or net.ipv4.tcp_migrate_req is enabled. Currently, the expected_attach_type is not enforced for the BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the earlier idea in the commit aac3fc320d94 ("bpf: Post-hooks for sys_bind") to fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type(). Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to select a new listener based on the child socket. migrating_sk varies depending on if it is migrating a request in the accept queue or during 3WHS. - accept_queue : sock (ESTABLISHED/SYN_RECV) - 3WHS : request_sock (NEW_SYN_RECV) In the eBPF program, we can select a new listener by BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning SK_DROP. This feature is useful when listeners have different settings at the socket API level or when we want to free resources as soon as possible. - SK_PASS with selected_sk, select it as a new listener - SK_PASS with selected_sk NULL, fallbacks to the random selection - SK_DROP, cancel the migration. There is a noteworthy point. We select a listening socket in three places, but we do not have struct skb at closing a listener or retransmitting a SYN+ACK. On the other hand, some helper functions do not expect skb is NULL (e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer() in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb temporarily before running the eBPF program. Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
2021-06-12 20:32:22 +08:00
struct bpf_prog *prog;
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
spin_lock_bh(&reuseport_lock);
reuse = rcu_dereference_protected(sk->sk_reuseport_cb,
lockdep_is_held(&reuseport_lock));
bpf: Support socket migration by eBPF. This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT to check if the attached eBPF program is capable of migrating sockets. When the eBPF program is attached, we run it for socket migration if the expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or net.ipv4.tcp_migrate_req is enabled. Currently, the expected_attach_type is not enforced for the BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the earlier idea in the commit aac3fc320d94 ("bpf: Post-hooks for sys_bind") to fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type(). Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to select a new listener based on the child socket. migrating_sk varies depending on if it is migrating a request in the accept queue or during 3WHS. - accept_queue : sock (ESTABLISHED/SYN_RECV) - 3WHS : request_sock (NEW_SYN_RECV) In the eBPF program, we can select a new listener by BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning SK_DROP. This feature is useful when listeners have different settings at the socket API level or when we want to free resources as soon as possible. - SK_PASS with selected_sk, select it as a new listener - SK_PASS with selected_sk NULL, fallbacks to the random selection - SK_DROP, cancel the migration. There is a noteworthy point. We select a listening socket in three places, but we do not have struct skb at closing a listener or retransmitting a SYN+ACK. On the other hand, some helper functions do not expect skb is NULL (e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer() in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb temporarily before running the eBPF program. Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
2021-06-12 20:32:22 +08:00
prog = rcu_dereference_protected(reuse->prog,
lockdep_is_held(&reuseport_lock));
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
bpf: Support socket migration by eBPF. This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT to check if the attached eBPF program is capable of migrating sockets. When the eBPF program is attached, we run it for socket migration if the expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or net.ipv4.tcp_migrate_req is enabled. Currently, the expected_attach_type is not enforced for the BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the earlier idea in the commit aac3fc320d94 ("bpf: Post-hooks for sys_bind") to fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type(). Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to select a new listener based on the child socket. migrating_sk varies depending on if it is migrating a request in the accept queue or during 3WHS. - accept_queue : sock (ESTABLISHED/SYN_RECV) - 3WHS : request_sock (NEW_SYN_RECV) In the eBPF program, we can select a new listener by BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning SK_DROP. This feature is useful when listeners have different settings at the socket API level or when we want to free resources as soon as possible. - SK_PASS with selected_sk, select it as a new listener - SK_PASS with selected_sk NULL, fallbacks to the random selection - SK_DROP, cancel the migration. There is a noteworthy point. We select a listening socket in three places, but we do not have struct skb at closing a listener or retransmitting a SYN+ACK. On the other hand, some helper functions do not expect skb is NULL (e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer() in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb temporarily before running the eBPF program. Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
2021-06-12 20:32:22 +08:00
if (sock_net(sk)->ipv4.sysctl_tcp_migrate_req ||
(prog && prog->expected_attach_type == BPF_SK_REUSEPORT_SELECT_OR_MIGRATE)) {
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
/* Migration capable, move sk from the listening section
* to the closed section.
*/
bpf_sk_reuseport_detach(sk);
__reuseport_detach_sock(sk, reuse);
__reuseport_add_closed_sock(sk, reuse);
spin_unlock_bh(&reuseport_lock);
return;
}
spin_unlock_bh(&reuseport_lock);
}
/* Not capable to do migration, detach immediately */
reuseport_detach_sock(sk);
}
EXPORT_SYMBOL(reuseport_stop_listen_sock);
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:26 +08:00
static struct sock *run_bpf_filter(struct sock_reuseport *reuse, u16 socks,
struct bpf_prog *prog, struct sk_buff *skb,
int hdr_len)
{
struct sk_buff *nskb = NULL;
u32 index;
if (skb_shared(skb)) {
nskb = skb_clone(skb, GFP_ATOMIC);
if (!nskb)
return NULL;
skb = nskb;
}
/* temporarily advance data past protocol header */
if (!pskb_pull(skb, hdr_len)) {
kfree_skb(nskb);
return NULL;
}
index = bpf_prog_run_save_cb(prog, skb);
__skb_push(skb, hdr_len);
consume_skb(nskb);
if (index >= socks)
return NULL;
return reuse->socks[index];
}
static struct sock *reuseport_select_sock_by_hash(struct sock_reuseport *reuse,
u32 hash, u16 num_socks)
{
int i, j;
i = j = reciprocal_scale(hash, num_socks);
while (reuse->socks[i]->sk_state == TCP_ESTABLISHED) {
i++;
if (i >= num_socks)
i = 0;
if (i == j)
return NULL;
}
return reuse->socks[i];
}
/**
* reuseport_select_sock - Select a socket from an SO_REUSEPORT group.
* @sk: First socket in the group.
* @hash: When no BPF filter is available, use this hash to select.
* @skb: skb to run through BPF filter.
* @hdr_len: BPF filter expects skb data pointer at payload data. If
* the skb does not yet point at the payload, this parameter represents
* how far the pointer needs to advance to reach the payload.
* Returns a socket that should receive the packet (or NULL on error).
*/
struct sock *reuseport_select_sock(struct sock *sk,
u32 hash,
struct sk_buff *skb,
int hdr_len)
{
struct sock_reuseport *reuse;
struct bpf_prog *prog;
struct sock *sk2 = NULL;
u16 socks;
rcu_read_lock();
reuse = rcu_dereference(sk->sk_reuseport_cb);
/* if memory allocation failed or add call is not yet complete */
if (!reuse)
goto out;
prog = rcu_dereference(reuse->prog);
socks = READ_ONCE(reuse->num_socks);
if (likely(socks)) {
/* paired with smp_wmb() in __reuseport_add_sock() */
smp_rmb();
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:26 +08:00
if (!prog || !skb)
goto select_by_hash;
if (prog->type == BPF_PROG_TYPE_SK_REUSEPORT)
bpf: Support socket migration by eBPF. This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT to check if the attached eBPF program is capable of migrating sockets. When the eBPF program is attached, we run it for socket migration if the expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or net.ipv4.tcp_migrate_req is enabled. Currently, the expected_attach_type is not enforced for the BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the earlier idea in the commit aac3fc320d94 ("bpf: Post-hooks for sys_bind") to fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type(). Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to select a new listener based on the child socket. migrating_sk varies depending on if it is migrating a request in the accept queue or during 3WHS. - accept_queue : sock (ESTABLISHED/SYN_RECV) - 3WHS : request_sock (NEW_SYN_RECV) In the eBPF program, we can select a new listener by BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning SK_DROP. This feature is useful when listeners have different settings at the socket API level or when we want to free resources as soon as possible. - SK_PASS with selected_sk, select it as a new listener - SK_PASS with selected_sk NULL, fallbacks to the random selection - SK_DROP, cancel the migration. There is a noteworthy point. We select a listening socket in three places, but we do not have struct skb at closing a listener or retransmitting a SYN+ACK. On the other hand, some helper functions do not expect skb is NULL (e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer() in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb temporarily before running the eBPF program. Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
2021-06-12 20:32:22 +08:00
sk2 = bpf_run_sk_reuseport(reuse, sk, prog, skb, NULL, hash);
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:26 +08:00
else
sk2 = run_bpf_filter(reuse, socks, prog, skb, hdr_len);
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:26 +08:00
select_by_hash:
/* no bpf or invalid bpf result: fall back to hash usage */
if (!sk2)
sk2 = reuseport_select_sock_by_hash(reuse, hash, socks);
}
out:
rcu_read_unlock();
return sk2;
}
EXPORT_SYMBOL(reuseport_select_sock);
/**
* reuseport_migrate_sock - Select a socket from an SO_REUSEPORT group.
* @sk: close()ed or shutdown()ed socket in the group.
* @migrating_sk: ESTABLISHED/SYN_RECV full socket in the accept queue or
* NEW_SYN_RECV request socket during 3WHS.
* @skb: skb to run through BPF filter.
* Returns a socket (with sk_refcnt +1) that should accept the child socket
* (or NULL on error).
*/
struct sock *reuseport_migrate_sock(struct sock *sk,
struct sock *migrating_sk,
struct sk_buff *skb)
{
struct sock_reuseport *reuse;
struct sock *nsk = NULL;
bpf: Support socket migration by eBPF. This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT to check if the attached eBPF program is capable of migrating sockets. When the eBPF program is attached, we run it for socket migration if the expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or net.ipv4.tcp_migrate_req is enabled. Currently, the expected_attach_type is not enforced for the BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the earlier idea in the commit aac3fc320d94 ("bpf: Post-hooks for sys_bind") to fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type(). Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to select a new listener based on the child socket. migrating_sk varies depending on if it is migrating a request in the accept queue or during 3WHS. - accept_queue : sock (ESTABLISHED/SYN_RECV) - 3WHS : request_sock (NEW_SYN_RECV) In the eBPF program, we can select a new listener by BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning SK_DROP. This feature is useful when listeners have different settings at the socket API level or when we want to free resources as soon as possible. - SK_PASS with selected_sk, select it as a new listener - SK_PASS with selected_sk NULL, fallbacks to the random selection - SK_DROP, cancel the migration. There is a noteworthy point. We select a listening socket in three places, but we do not have struct skb at closing a listener or retransmitting a SYN+ACK. On the other hand, some helper functions do not expect skb is NULL (e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer() in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb temporarily before running the eBPF program. Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
2021-06-12 20:32:22 +08:00
bool allocated = false;
struct bpf_prog *prog;
u16 socks;
u32 hash;
rcu_read_lock();
reuse = rcu_dereference(sk->sk_reuseport_cb);
if (!reuse)
goto out;
socks = READ_ONCE(reuse->num_socks);
if (unlikely(!socks))
goto failure;
/* paired with smp_wmb() in __reuseport_add_sock() */
smp_rmb();
hash = migrating_sk->sk_hash;
bpf: Support socket migration by eBPF. This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT to check if the attached eBPF program is capable of migrating sockets. When the eBPF program is attached, we run it for socket migration if the expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or net.ipv4.tcp_migrate_req is enabled. Currently, the expected_attach_type is not enforced for the BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the earlier idea in the commit aac3fc320d94 ("bpf: Post-hooks for sys_bind") to fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type(). Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to select a new listener based on the child socket. migrating_sk varies depending on if it is migrating a request in the accept queue or during 3WHS. - accept_queue : sock (ESTABLISHED/SYN_RECV) - 3WHS : request_sock (NEW_SYN_RECV) In the eBPF program, we can select a new listener by BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning SK_DROP. This feature is useful when listeners have different settings at the socket API level or when we want to free resources as soon as possible. - SK_PASS with selected_sk, select it as a new listener - SK_PASS with selected_sk NULL, fallbacks to the random selection - SK_DROP, cancel the migration. There is a noteworthy point. We select a listening socket in three places, but we do not have struct skb at closing a listener or retransmitting a SYN+ACK. On the other hand, some helper functions do not expect skb is NULL (e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer() in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb temporarily before running the eBPF program. Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
2021-06-12 20:32:22 +08:00
prog = rcu_dereference(reuse->prog);
if (!prog || prog->expected_attach_type != BPF_SK_REUSEPORT_SELECT_OR_MIGRATE) {
if (sock_net(sk)->ipv4.sysctl_tcp_migrate_req)
goto select_by_hash;
goto failure;
bpf: Support socket migration by eBPF. This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT to check if the attached eBPF program is capable of migrating sockets. When the eBPF program is attached, we run it for socket migration if the expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or net.ipv4.tcp_migrate_req is enabled. Currently, the expected_attach_type is not enforced for the BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the earlier idea in the commit aac3fc320d94 ("bpf: Post-hooks for sys_bind") to fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type(). Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to select a new listener based on the child socket. migrating_sk varies depending on if it is migrating a request in the accept queue or during 3WHS. - accept_queue : sock (ESTABLISHED/SYN_RECV) - 3WHS : request_sock (NEW_SYN_RECV) In the eBPF program, we can select a new listener by BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning SK_DROP. This feature is useful when listeners have different settings at the socket API level or when we want to free resources as soon as possible. - SK_PASS with selected_sk, select it as a new listener - SK_PASS with selected_sk NULL, fallbacks to the random selection - SK_DROP, cancel the migration. There is a noteworthy point. We select a listening socket in three places, but we do not have struct skb at closing a listener or retransmitting a SYN+ACK. On the other hand, some helper functions do not expect skb is NULL (e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer() in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb temporarily before running the eBPF program. Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
2021-06-12 20:32:22 +08:00
}
if (!skb) {
skb = alloc_skb(0, GFP_ATOMIC);
if (!skb)
goto failure;
bpf: Support socket migration by eBPF. This patch introduces a new bpf_attach_type for BPF_PROG_TYPE_SK_REUSEPORT to check if the attached eBPF program is capable of migrating sockets. When the eBPF program is attached, we run it for socket migration if the expected_attach_type is BPF_SK_REUSEPORT_SELECT_OR_MIGRATE or net.ipv4.tcp_migrate_req is enabled. Currently, the expected_attach_type is not enforced for the BPF_PROG_TYPE_SK_REUSEPORT type of program. Thus, this commit follows the earlier idea in the commit aac3fc320d94 ("bpf: Post-hooks for sys_bind") to fix up the zero expected_attach_type in bpf_prog_load_fixup_attach_type(). Moreover, this patch adds a new field (migrating_sk) to sk_reuseport_md to select a new listener based on the child socket. migrating_sk varies depending on if it is migrating a request in the accept queue or during 3WHS. - accept_queue : sock (ESTABLISHED/SYN_RECV) - 3WHS : request_sock (NEW_SYN_RECV) In the eBPF program, we can select a new listener by BPF_FUNC_sk_select_reuseport(). Also, we can cancel migration by returning SK_DROP. This feature is useful when listeners have different settings at the socket API level or when we want to free resources as soon as possible. - SK_PASS with selected_sk, select it as a new listener - SK_PASS with selected_sk NULL, fallbacks to the random selection - SK_DROP, cancel the migration. There is a noteworthy point. We select a listening socket in three places, but we do not have struct skb at closing a listener or retransmitting a SYN+ACK. On the other hand, some helper functions do not expect skb is NULL (e.g. skb_header_pointer() in BPF_FUNC_skb_load_bytes(), skb_tail_pointer() in BPF_FUNC_skb_load_bytes_relative()). So we allocate an empty skb temporarily before running the eBPF program. Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/netdev/20201123003828.xjpjdtk4ygl6tg6h@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201203042402.6cskdlit5f3mw4ru@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/netdev/20201209030903.hhow5r53l6fmozjn@kafai-mbp.dhcp.thefacebook.com/ Link: https://lore.kernel.org/bpf/20210612123224.12525-10-kuniyu@amazon.co.jp
2021-06-12 20:32:22 +08:00
allocated = true;
}
nsk = bpf_run_sk_reuseport(reuse, sk, prog, skb, migrating_sk, hash);
if (allocated)
kfree_skb(skb);
select_by_hash:
if (!nsk)
nsk = reuseport_select_sock_by_hash(reuse, hash, socks);
if (IS_ERR_OR_NULL(nsk) || unlikely(!refcount_inc_not_zero(&nsk->sk_refcnt))) {
nsk = NULL;
goto failure;
}
out:
rcu_read_unlock();
return nsk;
failure:
__NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPMIGRATEREQFAILURE);
goto out;
}
EXPORT_SYMBOL(reuseport_migrate_sock);
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:26 +08:00
int reuseport_attach_prog(struct sock *sk, struct bpf_prog *prog)
{
struct sock_reuseport *reuse;
struct bpf_prog *old_prog;
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
if (sk_unhashed(sk)) {
int err;
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:26 +08:00
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
if (!sk->sk_reuseport)
return -EINVAL;
err = reuseport_alloc(sk, false);
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:26 +08:00
if (err)
return err;
} else if (!rcu_access_pointer(sk->sk_reuseport_cb)) {
/* The socket wasn't bound with SO_REUSEPORT */
return -EINVAL;
}
spin_lock_bh(&reuseport_lock);
reuse = rcu_dereference_protected(sk->sk_reuseport_cb,
lockdep_is_held(&reuseport_lock));
old_prog = rcu_dereference_protected(reuse->prog,
lockdep_is_held(&reuseport_lock));
rcu_assign_pointer(reuse->prog, prog);
spin_unlock_bh(&reuseport_lock);
bpf: Enable BPF_PROG_TYPE_SK_REUSEPORT bpf prog in reuseport selection This patch allows a BPF_PROG_TYPE_SK_REUSEPORT bpf prog to select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY introduced in the earlier patch. "bpf_run_sk_reuseport()" will return -ECONNREFUSED when the BPF_PROG_TYPE_SK_REUSEPORT prog returns SK_DROP. The callers, in inet[6]_hashtable.c and ipv[46]/udp.c, are modified to handle this case and return NULL immediately instead of continuing the sk search from its hashtable. It re-uses the existing SO_ATTACH_REUSEPORT_EBPF setsockopt to attach BPF_PROG_TYPE_SK_REUSEPORT. The "sk_reuseport_attach_bpf()" will check if the attaching bpf prog is in the new SK_REUSEPORT or the existing SOCKET_FILTER type and then check different things accordingly. One level of "__reuseport_attach_prog()" call is removed. The "sk_unhashed() && ..." and "sk->sk_reuseport_cb" tests are pushed back to "reuseport_attach_prog()" in sock_reuseport.c. sock_reuseport.c seems to have more knowledge on those test requirements than filter.c. In "reuseport_attach_prog()", after new_prog is attached to reuse->prog, the old_prog (if any) is also directly freed instead of returning the old_prog to the caller and asking the caller to free. The sysctl_optmem_max check is moved back to the "sk_reuseport_attach_filter()" and "sk_reuseport_attach_bpf()". As of other bpf prog types, the new BPF_PROG_TYPE_SK_REUSEPORT is only bounded by the usual "bpf_prog_charge_memlock()" during load time instead of bounded by both bpf_prog_charge_memlock and sysctl_optmem_max. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-08 16:01:26 +08:00
sk_reuseport_prog_free(old_prog);
return 0;
}
EXPORT_SYMBOL(reuseport_attach_prog);
int reuseport_detach_prog(struct sock *sk)
{
struct sock_reuseport *reuse;
struct bpf_prog *old_prog;
old_prog = NULL;
spin_lock_bh(&reuseport_lock);
reuse = rcu_dereference_protected(sk->sk_reuseport_cb,
lockdep_is_held(&reuseport_lock));
tcp: Keep TCP_CLOSE sockets in the reuseport group. When we close a listening socket, to migrate its connections to another listener in the same reuseport group, we have to handle two kinds of child sockets. One is that a listening socket has a reference to, and the other is not. The former is the TCP_ESTABLISHED/TCP_SYN_RECV sockets, and they are in the accept queue of their listening socket. So we can pop them out and push them into another listener's queue at close() or shutdown() syscalls. On the other hand, the latter, the TCP_NEW_SYN_RECV socket is during the three-way handshake and not in the accept queue. Thus, we cannot access such sockets at close() or shutdown() syscalls. Accordingly, we have to migrate immature sockets after their listening socket has been closed. Currently, if their listening socket has been closed, TCP_NEW_SYN_RECV sockets are freed at receiving the final ACK or retransmitting SYN+ACKs. At that time, if we could select a new listener from the same reuseport group, no connection would be aborted. However, we cannot do that because reuseport_detach_sock() sets NULL to sk_reuseport_cb and forbids access to the reuseport group from closed sockets. This patch allows TCP_CLOSE sockets to remain in the reuseport group and access it while any child socket references them. The point is that reuseport_detach_sock() was called twice from inet_unhash() and sk_destruct(). This patch replaces the first reuseport_detach_sock() with reuseport_stop_listen_sock(), which checks if the reuseport group is capable of migration. If capable, it decrements num_socks, moves the socket backwards in socks[] and increments num_closed_socks. When all connections are migrated, sk_destruct() calls reuseport_detach_sock() to remove the socket from socks[], decrement num_closed_socks, and set NULL to sk_reuseport_cb. By this change, closed or shutdowned sockets can keep sk_reuseport_cb. Consequently, calling listen() after shutdown() can cause EADDRINUSE or EBUSY in inet_csk_bind_conflict() or reuseport_add_sock() which expects such sockets not to have the reuseport group. Therefore, this patch also loosens such validation rules so that a socket can listen again if it has a reuseport group with num_closed_socks more than 0. When such sockets listen again, we handle them in reuseport_resurrect(). If there is an existing reuseport group (reuseport_add_sock() path), we move the socket from the old group to the new one and free the old one if necessary. If there is no existing group (reuseport_alloc() path), we allocate a new reuseport group, detach sk from the old one, and free it if necessary, not to break the current shutdown behaviour: - we cannot carry over the eBPF prog of shutdowned sockets - we cannot attach/detach an eBPF prog to/from listening sockets via shutdowned sockets Note that when the number of sockets gets over U16_MAX, we try to detach a closed socket randomly to make room for the new listening socket in reuseport_grow(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-4-kuniyu@amazon.co.jp
2021-06-12 20:32:16 +08:00
/* reuse must be checked after acquiring the reuseport_lock
* because reuseport_grow() can detach a closed sk.
*/
if (!reuse) {
spin_unlock_bh(&reuseport_lock);
return sk->sk_reuseport ? -ENOENT : -EINVAL;
}
if (sk_unhashed(sk) && reuse->num_closed_socks) {
spin_unlock_bh(&reuseport_lock);
return -ENOENT;
}
old_prog = rcu_replace_pointer(reuse->prog, old_prog,
lockdep_is_held(&reuseport_lock));
spin_unlock_bh(&reuseport_lock);
if (!old_prog)
return -ENOENT;
sk_reuseport_prog_free(old_prog);
return 0;
}
EXPORT_SYMBOL(reuseport_detach_prog);