2008-12-19 04:25:44 +08:00
|
|
|
/*
|
|
|
|
* twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller
|
|
|
|
*
|
|
|
|
* Copyright (C) 2004-2007 Texas Instruments
|
|
|
|
* Copyright (C) 2008 Nokia Corporation
|
|
|
|
* Contact: Felipe Balbi <felipe.balbi@nokia.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*
|
|
|
|
* Current status:
|
|
|
|
* - HS USB ULPI mode works.
|
|
|
|
* - 3-pin mode support may be added in future.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/usb/otg.h>
|
2009-12-14 03:05:51 +08:00
|
|
|
#include <linux/i2c/twl.h>
|
2009-02-20 20:02:31 +08:00
|
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <linux/err.h>
|
2009-12-17 19:01:37 +08:00
|
|
|
#include <linux/notifier.h>
|
2008-12-19 04:25:44 +08:00
|
|
|
|
|
|
|
/* Register defines */
|
|
|
|
|
|
|
|
#define VENDOR_ID_LO 0x00
|
|
|
|
#define VENDOR_ID_HI 0x01
|
|
|
|
#define PRODUCT_ID_LO 0x02
|
|
|
|
#define PRODUCT_ID_HI 0x03
|
|
|
|
|
|
|
|
#define FUNC_CTRL 0x04
|
|
|
|
#define FUNC_CTRL_SET 0x05
|
|
|
|
#define FUNC_CTRL_CLR 0x06
|
|
|
|
#define FUNC_CTRL_SUSPENDM (1 << 6)
|
|
|
|
#define FUNC_CTRL_RESET (1 << 5)
|
|
|
|
#define FUNC_CTRL_OPMODE_MASK (3 << 3) /* bits 3 and 4 */
|
|
|
|
#define FUNC_CTRL_OPMODE_NORMAL (0 << 3)
|
|
|
|
#define FUNC_CTRL_OPMODE_NONDRIVING (1 << 3)
|
|
|
|
#define FUNC_CTRL_OPMODE_DISABLE_BIT_NRZI (2 << 3)
|
|
|
|
#define FUNC_CTRL_TERMSELECT (1 << 2)
|
|
|
|
#define FUNC_CTRL_XCVRSELECT_MASK (3 << 0) /* bits 0 and 1 */
|
|
|
|
#define FUNC_CTRL_XCVRSELECT_HS (0 << 0)
|
|
|
|
#define FUNC_CTRL_XCVRSELECT_FS (1 << 0)
|
|
|
|
#define FUNC_CTRL_XCVRSELECT_LS (2 << 0)
|
|
|
|
#define FUNC_CTRL_XCVRSELECT_FS4LS (3 << 0)
|
|
|
|
|
|
|
|
#define IFC_CTRL 0x07
|
|
|
|
#define IFC_CTRL_SET 0x08
|
|
|
|
#define IFC_CTRL_CLR 0x09
|
|
|
|
#define IFC_CTRL_INTERFACE_PROTECT_DISABLE (1 << 7)
|
|
|
|
#define IFC_CTRL_AUTORESUME (1 << 4)
|
|
|
|
#define IFC_CTRL_CLOCKSUSPENDM (1 << 3)
|
|
|
|
#define IFC_CTRL_CARKITMODE (1 << 2)
|
|
|
|
#define IFC_CTRL_FSLSSERIALMODE_3PIN (1 << 1)
|
|
|
|
|
|
|
|
#define TWL4030_OTG_CTRL 0x0A
|
|
|
|
#define TWL4030_OTG_CTRL_SET 0x0B
|
|
|
|
#define TWL4030_OTG_CTRL_CLR 0x0C
|
|
|
|
#define TWL4030_OTG_CTRL_DRVVBUS (1 << 5)
|
|
|
|
#define TWL4030_OTG_CTRL_CHRGVBUS (1 << 4)
|
|
|
|
#define TWL4030_OTG_CTRL_DISCHRGVBUS (1 << 3)
|
|
|
|
#define TWL4030_OTG_CTRL_DMPULLDOWN (1 << 2)
|
|
|
|
#define TWL4030_OTG_CTRL_DPPULLDOWN (1 << 1)
|
|
|
|
#define TWL4030_OTG_CTRL_IDPULLUP (1 << 0)
|
|
|
|
|
|
|
|
#define USB_INT_EN_RISE 0x0D
|
|
|
|
#define USB_INT_EN_RISE_SET 0x0E
|
|
|
|
#define USB_INT_EN_RISE_CLR 0x0F
|
|
|
|
#define USB_INT_EN_FALL 0x10
|
|
|
|
#define USB_INT_EN_FALL_SET 0x11
|
|
|
|
#define USB_INT_EN_FALL_CLR 0x12
|
|
|
|
#define USB_INT_STS 0x13
|
|
|
|
#define USB_INT_LATCH 0x14
|
|
|
|
#define USB_INT_IDGND (1 << 4)
|
|
|
|
#define USB_INT_SESSEND (1 << 3)
|
|
|
|
#define USB_INT_SESSVALID (1 << 2)
|
|
|
|
#define USB_INT_VBUSVALID (1 << 1)
|
|
|
|
#define USB_INT_HOSTDISCONNECT (1 << 0)
|
|
|
|
|
|
|
|
#define CARKIT_CTRL 0x19
|
|
|
|
#define CARKIT_CTRL_SET 0x1A
|
|
|
|
#define CARKIT_CTRL_CLR 0x1B
|
|
|
|
#define CARKIT_CTRL_MICEN (1 << 6)
|
|
|
|
#define CARKIT_CTRL_SPKRIGHTEN (1 << 5)
|
|
|
|
#define CARKIT_CTRL_SPKLEFTEN (1 << 4)
|
|
|
|
#define CARKIT_CTRL_RXDEN (1 << 3)
|
|
|
|
#define CARKIT_CTRL_TXDEN (1 << 2)
|
|
|
|
#define CARKIT_CTRL_IDGNDDRV (1 << 1)
|
|
|
|
#define CARKIT_CTRL_CARKITPWR (1 << 0)
|
|
|
|
#define CARKIT_PLS_CTRL 0x22
|
|
|
|
#define CARKIT_PLS_CTRL_SET 0x23
|
|
|
|
#define CARKIT_PLS_CTRL_CLR 0x24
|
|
|
|
#define CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3)
|
|
|
|
#define CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2)
|
|
|
|
#define CARKIT_PLS_CTRL_RXPLSEN (1 << 1)
|
|
|
|
#define CARKIT_PLS_CTRL_TXPLSEN (1 << 0)
|
|
|
|
|
|
|
|
#define MCPC_CTRL 0x30
|
|
|
|
#define MCPC_CTRL_SET 0x31
|
|
|
|
#define MCPC_CTRL_CLR 0x32
|
|
|
|
#define MCPC_CTRL_RTSOL (1 << 7)
|
|
|
|
#define MCPC_CTRL_EXTSWR (1 << 6)
|
|
|
|
#define MCPC_CTRL_EXTSWC (1 << 5)
|
|
|
|
#define MCPC_CTRL_VOICESW (1 << 4)
|
|
|
|
#define MCPC_CTRL_OUT64K (1 << 3)
|
|
|
|
#define MCPC_CTRL_RTSCTSSW (1 << 2)
|
|
|
|
#define MCPC_CTRL_HS_UART (1 << 0)
|
|
|
|
|
|
|
|
#define MCPC_IO_CTRL 0x33
|
|
|
|
#define MCPC_IO_CTRL_SET 0x34
|
|
|
|
#define MCPC_IO_CTRL_CLR 0x35
|
|
|
|
#define MCPC_IO_CTRL_MICBIASEN (1 << 5)
|
|
|
|
#define MCPC_IO_CTRL_CTS_NPU (1 << 4)
|
|
|
|
#define MCPC_IO_CTRL_RXD_PU (1 << 3)
|
|
|
|
#define MCPC_IO_CTRL_TXDTYP (1 << 2)
|
|
|
|
#define MCPC_IO_CTRL_CTSTYP (1 << 1)
|
|
|
|
#define MCPC_IO_CTRL_RTSTYP (1 << 0)
|
|
|
|
|
|
|
|
#define MCPC_CTRL2 0x36
|
|
|
|
#define MCPC_CTRL2_SET 0x37
|
|
|
|
#define MCPC_CTRL2_CLR 0x38
|
|
|
|
#define MCPC_CTRL2_MCPC_CK_EN (1 << 0)
|
|
|
|
|
|
|
|
#define OTHER_FUNC_CTRL 0x80
|
|
|
|
#define OTHER_FUNC_CTRL_SET 0x81
|
|
|
|
#define OTHER_FUNC_CTRL_CLR 0x82
|
|
|
|
#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4)
|
|
|
|
#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2)
|
|
|
|
|
|
|
|
#define OTHER_IFC_CTRL 0x83
|
|
|
|
#define OTHER_IFC_CTRL_SET 0x84
|
|
|
|
#define OTHER_IFC_CTRL_CLR 0x85
|
|
|
|
#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6)
|
|
|
|
#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5)
|
|
|
|
#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4)
|
|
|
|
#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3)
|
|
|
|
#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2)
|
|
|
|
#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0)
|
|
|
|
|
|
|
|
#define OTHER_INT_EN_RISE 0x86
|
|
|
|
#define OTHER_INT_EN_RISE_SET 0x87
|
|
|
|
#define OTHER_INT_EN_RISE_CLR 0x88
|
|
|
|
#define OTHER_INT_EN_FALL 0x89
|
|
|
|
#define OTHER_INT_EN_FALL_SET 0x8A
|
|
|
|
#define OTHER_INT_EN_FALL_CLR 0x8B
|
|
|
|
#define OTHER_INT_STS 0x8C
|
|
|
|
#define OTHER_INT_LATCH 0x8D
|
|
|
|
#define OTHER_INT_VB_SESS_VLD (1 << 7)
|
|
|
|
#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */
|
|
|
|
#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */
|
|
|
|
#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */
|
|
|
|
#define OTHER_INT_MANU (1 << 1)
|
|
|
|
#define OTHER_INT_ABNORMAL_STRESS (1 << 0)
|
|
|
|
|
|
|
|
#define ID_STATUS 0x96
|
|
|
|
#define ID_RES_FLOAT (1 << 4)
|
|
|
|
#define ID_RES_440K (1 << 3)
|
|
|
|
#define ID_RES_200K (1 << 2)
|
|
|
|
#define ID_RES_102K (1 << 1)
|
|
|
|
#define ID_RES_GND (1 << 0)
|
|
|
|
|
|
|
|
#define POWER_CTRL 0xAC
|
|
|
|
#define POWER_CTRL_SET 0xAD
|
|
|
|
#define POWER_CTRL_CLR 0xAE
|
|
|
|
#define POWER_CTRL_OTG_ENAB (1 << 5)
|
|
|
|
|
|
|
|
#define OTHER_IFC_CTRL2 0xAF
|
|
|
|
#define OTHER_IFC_CTRL2_SET 0xB0
|
|
|
|
#define OTHER_IFC_CTRL2_CLR 0xB1
|
|
|
|
#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4)
|
|
|
|
#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3)
|
|
|
|
#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2)
|
|
|
|
#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */
|
|
|
|
#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0)
|
|
|
|
#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0)
|
|
|
|
|
|
|
|
#define REG_CTRL_EN 0xB2
|
|
|
|
#define REG_CTRL_EN_SET 0xB3
|
|
|
|
#define REG_CTRL_EN_CLR 0xB4
|
|
|
|
#define REG_CTRL_ERROR 0xB5
|
|
|
|
#define ULPI_I2C_CONFLICT_INTEN (1 << 0)
|
|
|
|
|
|
|
|
#define OTHER_FUNC_CTRL2 0xB8
|
|
|
|
#define OTHER_FUNC_CTRL2_SET 0xB9
|
|
|
|
#define OTHER_FUNC_CTRL2_CLR 0xBA
|
|
|
|
#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0)
|
|
|
|
|
|
|
|
/* following registers do not have separate _clr and _set registers */
|
|
|
|
#define VBUS_DEBOUNCE 0xC0
|
|
|
|
#define ID_DEBOUNCE 0xC1
|
|
|
|
#define VBAT_TIMER 0xD3
|
|
|
|
#define PHY_PWR_CTRL 0xFD
|
|
|
|
#define PHY_PWR_PHYPWD (1 << 0)
|
|
|
|
#define PHY_CLK_CTRL 0xFE
|
|
|
|
#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2)
|
|
|
|
#define PHY_CLK_CTRL_CLK32K_EN (1 << 1)
|
|
|
|
#define REQ_PHY_DPLL_CLK (1 << 0)
|
|
|
|
#define PHY_CLK_CTRL_STS 0xFF
|
|
|
|
#define PHY_DPLL_CLK (1 << 0)
|
|
|
|
|
|
|
|
/* In module TWL4030_MODULE_PM_MASTER */
|
|
|
|
#define PROTECT_KEY 0x0E
|
2009-04-01 03:26:10 +08:00
|
|
|
#define STS_HW_CONDITIONS 0x0F
|
2008-12-19 04:25:44 +08:00
|
|
|
|
|
|
|
/* In module TWL4030_MODULE_PM_RECEIVER */
|
|
|
|
#define VUSB_DEDICATED1 0x7D
|
|
|
|
#define VUSB_DEDICATED2 0x7E
|
|
|
|
#define VUSB1V5_DEV_GRP 0x71
|
|
|
|
#define VUSB1V5_TYPE 0x72
|
|
|
|
#define VUSB1V5_REMAP 0x73
|
|
|
|
#define VUSB1V8_DEV_GRP 0x74
|
|
|
|
#define VUSB1V8_TYPE 0x75
|
|
|
|
#define VUSB1V8_REMAP 0x76
|
|
|
|
#define VUSB3V1_DEV_GRP 0x77
|
|
|
|
#define VUSB3V1_TYPE 0x78
|
|
|
|
#define VUSB3V1_REMAP 0x79
|
|
|
|
|
|
|
|
/* In module TWL4030_MODULE_INTBR */
|
|
|
|
#define PMBR1 0x0D
|
|
|
|
#define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
|
|
|
|
|
|
|
|
struct twl4030_usb {
|
|
|
|
struct otg_transceiver otg;
|
|
|
|
struct device *dev;
|
|
|
|
|
2009-02-20 20:02:31 +08:00
|
|
|
/* TWL4030 internal USB regulator supplies */
|
|
|
|
struct regulator *usb1v5;
|
|
|
|
struct regulator *usb1v8;
|
|
|
|
struct regulator *usb3v1;
|
|
|
|
|
2008-12-19 04:25:44 +08:00
|
|
|
/* for vbus reporting with irqs disabled */
|
|
|
|
spinlock_t lock;
|
|
|
|
|
|
|
|
/* pin configuration */
|
|
|
|
enum twl4030_usb_mode usb_mode;
|
|
|
|
|
|
|
|
int irq;
|
|
|
|
u8 linkstat;
|
|
|
|
u8 asleep;
|
|
|
|
bool irq_enabled;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* internal define on top of container_of */
|
|
|
|
#define xceiv_to_twl(x) container_of((x), struct twl4030_usb, otg);
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
|
|
|
|
u8 module, u8 data, u8 address)
|
|
|
|
{
|
|
|
|
u8 check;
|
|
|
|
|
2009-12-14 04:23:33 +08:00
|
|
|
if ((twl_i2c_write_u8(module, data, address) >= 0) &&
|
|
|
|
(twl_i2c_read_u8(module, &check, address) >= 0) &&
|
2008-12-19 04:25:44 +08:00
|
|
|
(check == data))
|
|
|
|
return 0;
|
|
|
|
dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
|
|
|
|
1, module, address, check, data);
|
|
|
|
|
|
|
|
/* Failed once: Try again */
|
2009-12-14 04:23:33 +08:00
|
|
|
if ((twl_i2c_write_u8(module, data, address) >= 0) &&
|
|
|
|
(twl_i2c_read_u8(module, &check, address) >= 0) &&
|
2008-12-19 04:25:44 +08:00
|
|
|
(check == data))
|
|
|
|
return 0;
|
|
|
|
dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
|
|
|
|
2, module, address, check, data);
|
|
|
|
|
|
|
|
/* Failed again: Return error */
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
#define twl4030_usb_write_verify(twl, address, data) \
|
|
|
|
twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_USB, (data), (address))
|
|
|
|
|
|
|
|
static inline int twl4030_usb_write(struct twl4030_usb *twl,
|
|
|
|
u8 address, u8 data)
|
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
|
2009-12-14 04:23:33 +08:00
|
|
|
ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address);
|
2008-12-19 04:25:44 +08:00
|
|
|
if (ret < 0)
|
|
|
|
dev_dbg(twl->dev,
|
|
|
|
"TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address)
|
|
|
|
{
|
|
|
|
u8 data;
|
|
|
|
int ret = 0;
|
|
|
|
|
2009-12-14 04:23:33 +08:00
|
|
|
ret = twl_i2c_read_u8(module, &data, address);
|
2008-12-19 04:25:44 +08:00
|
|
|
if (ret >= 0)
|
|
|
|
ret = data;
|
|
|
|
else
|
|
|
|
dev_dbg(twl->dev,
|
|
|
|
"TWL4030:readb[0x%x,0x%x] Error %d\n",
|
|
|
|
module, address, ret);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
|
|
|
|
{
|
|
|
|
return twl4030_readb(twl, TWL4030_MODULE_USB, address);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
|
|
|
|
{
|
|
|
|
return twl4030_usb_write(twl, reg + 1, bits);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
|
|
|
|
{
|
|
|
|
return twl4030_usb_write(twl, reg + 2, bits);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
2009-12-17 19:01:37 +08:00
|
|
|
static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl)
|
2008-12-19 04:25:44 +08:00
|
|
|
{
|
|
|
|
int status;
|
2009-12-17 19:01:37 +08:00
|
|
|
int linkstat = USB_EVENT_NONE;
|
2008-12-19 04:25:44 +08:00
|
|
|
|
2009-04-01 03:26:10 +08:00
|
|
|
/*
|
|
|
|
* For ID/VBUS sensing, see manual section 15.4.8 ...
|
|
|
|
* except when using only battery backup power, two
|
|
|
|
* comparators produce VBUS_PRES and ID_PRES signals,
|
|
|
|
* which don't match docs elsewhere. But ... BIT(7)
|
|
|
|
* and BIT(2) of STS_HW_CONDITIONS, respectively, do
|
|
|
|
* seem to match up. If either is true the USB_PRES
|
|
|
|
* signal is active, the OTG module is activated, and
|
|
|
|
* its interrupt may be raised (may wake the system).
|
|
|
|
*/
|
|
|
|
status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER,
|
|
|
|
STS_HW_CONDITIONS);
|
2008-12-19 04:25:44 +08:00
|
|
|
if (status < 0)
|
|
|
|
dev_err(twl->dev, "USB link status err %d\n", status);
|
2009-04-01 03:26:10 +08:00
|
|
|
else if (status & (BIT(7) | BIT(2))) {
|
|
|
|
if (status & BIT(2))
|
2009-12-17 19:01:37 +08:00
|
|
|
linkstat = USB_EVENT_ID;
|
2009-04-01 03:26:10 +08:00
|
|
|
else
|
2009-12-17 19:01:37 +08:00
|
|
|
linkstat = USB_EVENT_VBUS;
|
2009-04-01 03:26:10 +08:00
|
|
|
} else
|
2009-12-17 19:01:37 +08:00
|
|
|
linkstat = USB_EVENT_NONE;
|
2008-12-19 04:25:44 +08:00
|
|
|
|
|
|
|
dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
|
|
|
|
status, status, linkstat);
|
|
|
|
|
|
|
|
/* REVISIT this assumes host and peripheral controllers
|
|
|
|
* are registered, and that both are active...
|
|
|
|
*/
|
|
|
|
|
|
|
|
spin_lock_irq(&twl->lock);
|
|
|
|
twl->linkstat = linkstat;
|
2009-12-17 19:01:37 +08:00
|
|
|
if (linkstat == USB_EVENT_ID) {
|
2008-12-19 04:25:44 +08:00
|
|
|
twl->otg.default_a = true;
|
|
|
|
twl->otg.state = OTG_STATE_A_IDLE;
|
|
|
|
} else {
|
|
|
|
twl->otg.default_a = false;
|
|
|
|
twl->otg.state = OTG_STATE_B_IDLE;
|
|
|
|
}
|
|
|
|
spin_unlock_irq(&twl->lock);
|
|
|
|
|
|
|
|
return linkstat;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode)
|
|
|
|
{
|
|
|
|
twl->usb_mode = mode;
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case T2_USB_MODE_ULPI:
|
|
|
|
twl4030_usb_clear_bits(twl, IFC_CTRL, IFC_CTRL_CARKITMODE);
|
|
|
|
twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
|
|
|
|
twl4030_usb_clear_bits(twl, FUNC_CTRL,
|
|
|
|
FUNC_CTRL_XCVRSELECT_MASK |
|
|
|
|
FUNC_CTRL_OPMODE_MASK);
|
|
|
|
break;
|
|
|
|
case -1:
|
|
|
|
/* FIXME: power on defaults */
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(twl->dev, "unsupported T2 transceiver mode %d\n",
|
|
|
|
mode);
|
|
|
|
break;
|
|
|
|
};
|
|
|
|
}
|
|
|
|
|
|
|
|
static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
|
|
|
|
{
|
|
|
|
unsigned long timeout;
|
|
|
|
int val = twl4030_usb_read(twl, PHY_CLK_CTRL);
|
|
|
|
|
|
|
|
if (val >= 0) {
|
|
|
|
if (on) {
|
|
|
|
/* enable DPLL to access PHY registers over I2C */
|
|
|
|
val |= REQ_PHY_DPLL_CLK;
|
|
|
|
WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
|
|
|
|
(u8)val) < 0);
|
|
|
|
|
|
|
|
timeout = jiffies + HZ;
|
|
|
|
while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
|
|
|
|
PHY_DPLL_CLK)
|
|
|
|
&& time_before(jiffies, timeout))
|
|
|
|
udelay(10);
|
|
|
|
if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
|
|
|
|
PHY_DPLL_CLK))
|
|
|
|
dev_err(twl->dev, "Timeout setting T2 HSUSB "
|
|
|
|
"PHY DPLL clock\n");
|
|
|
|
} else {
|
|
|
|
/* let ULPI control the DPLL clock */
|
|
|
|
val &= ~REQ_PHY_DPLL_CLK;
|
|
|
|
WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
|
|
|
|
(u8)val) < 0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void twl4030_phy_power(struct twl4030_usb *twl, int on)
|
|
|
|
{
|
|
|
|
u8 pwr;
|
|
|
|
|
|
|
|
pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
|
|
|
|
if (on) {
|
2009-02-20 20:02:31 +08:00
|
|
|
regulator_enable(twl->usb3v1);
|
|
|
|
regulator_enable(twl->usb1v8);
|
|
|
|
/*
|
|
|
|
* Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
|
|
|
|
* in twl4030) resets the VUSB_DEDICATED2 register. This reset
|
|
|
|
* enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
|
|
|
|
* SLEEP. We work around this by clearing the bit after usv3v1
|
|
|
|
* is re-activated. This ensures that VUSB3V1 is really active.
|
|
|
|
*/
|
2009-12-14 04:23:33 +08:00
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
|
2009-02-20 20:02:31 +08:00
|
|
|
VUSB_DEDICATED2);
|
|
|
|
regulator_enable(twl->usb1v5);
|
2008-12-19 04:25:44 +08:00
|
|
|
pwr &= ~PHY_PWR_PHYPWD;
|
|
|
|
WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
|
|
|
|
twl4030_usb_write(twl, PHY_CLK_CTRL,
|
|
|
|
twl4030_usb_read(twl, PHY_CLK_CTRL) |
|
|
|
|
(PHY_CLK_CTRL_CLOCKGATING_EN |
|
|
|
|
PHY_CLK_CTRL_CLK32K_EN));
|
|
|
|
} else {
|
|
|
|
pwr |= PHY_PWR_PHYPWD;
|
|
|
|
WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
|
2009-02-20 20:02:31 +08:00
|
|
|
regulator_disable(twl->usb1v5);
|
|
|
|
regulator_disable(twl->usb1v8);
|
|
|
|
regulator_disable(twl->usb3v1);
|
2008-12-19 04:25:44 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
|
|
|
|
{
|
|
|
|
if (twl->asleep)
|
|
|
|
return;
|
|
|
|
|
|
|
|
twl4030_phy_power(twl, 0);
|
|
|
|
twl->asleep = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void twl4030_phy_resume(struct twl4030_usb *twl)
|
|
|
|
{
|
|
|
|
if (!twl->asleep)
|
|
|
|
return;
|
|
|
|
|
|
|
|
twl4030_phy_power(twl, 1);
|
|
|
|
twl4030_i2c_access(twl, 1);
|
|
|
|
twl4030_usb_set_mode(twl, twl->usb_mode);
|
|
|
|
if (twl->usb_mode == T2_USB_MODE_ULPI)
|
|
|
|
twl4030_i2c_access(twl, 0);
|
|
|
|
twl->asleep = 0;
|
|
|
|
}
|
|
|
|
|
2009-02-20 20:02:31 +08:00
|
|
|
static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
|
2008-12-19 04:25:44 +08:00
|
|
|
{
|
|
|
|
/* Enable writing to power configuration registers */
|
2009-12-14 04:23:33 +08:00
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
|
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY);
|
2008-12-19 04:25:44 +08:00
|
|
|
|
|
|
|
/* put VUSB3V1 LDO in active state */
|
2009-12-14 04:23:33 +08:00
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
|
2008-12-19 04:25:44 +08:00
|
|
|
|
|
|
|
/* input to VUSB3V1 LDO is from VBAT, not VBUS */
|
2009-12-14 04:23:33 +08:00
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
|
2008-12-19 04:25:44 +08:00
|
|
|
|
2009-02-20 20:02:31 +08:00
|
|
|
/* Initialize 3.1V regulator */
|
2009-12-14 04:23:33 +08:00
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
|
2009-02-20 20:02:31 +08:00
|
|
|
|
|
|
|
twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
|
|
|
|
if (IS_ERR(twl->usb3v1))
|
|
|
|
return -ENODEV;
|
|
|
|
|
2009-12-14 04:23:33 +08:00
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
|
2008-12-19 04:25:44 +08:00
|
|
|
|
2009-02-20 20:02:31 +08:00
|
|
|
/* Initialize 1.5V regulator */
|
2009-12-14 04:23:33 +08:00
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
|
2009-02-20 20:02:31 +08:00
|
|
|
|
|
|
|
twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
|
|
|
|
if (IS_ERR(twl->usb1v5))
|
|
|
|
goto fail1;
|
|
|
|
|
2009-12-14 04:23:33 +08:00
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
|
2008-12-19 04:25:44 +08:00
|
|
|
|
2009-02-20 20:02:31 +08:00
|
|
|
/* Initialize 1.8V regulator */
|
2009-12-14 04:23:33 +08:00
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
|
2009-02-20 20:02:31 +08:00
|
|
|
|
|
|
|
twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
|
|
|
|
if (IS_ERR(twl->usb1v8))
|
|
|
|
goto fail2;
|
|
|
|
|
2009-12-14 04:23:33 +08:00
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
|
2008-12-19 04:25:44 +08:00
|
|
|
|
|
|
|
/* disable access to power configuration registers */
|
2009-12-14 04:23:33 +08:00
|
|
|
twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY);
|
2009-02-20 20:02:31 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail2:
|
|
|
|
regulator_put(twl->usb1v5);
|
|
|
|
twl->usb1v5 = NULL;
|
|
|
|
fail1:
|
|
|
|
regulator_put(twl->usb3v1);
|
|
|
|
twl->usb3v1 = NULL;
|
|
|
|
return -ENODEV;
|
2008-12-19 04:25:44 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t twl4030_usb_vbus_show(struct device *dev,
|
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
|
{
|
|
|
|
struct twl4030_usb *twl = dev_get_drvdata(dev);
|
|
|
|
unsigned long flags;
|
|
|
|
int ret = -EINVAL;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&twl->lock, flags);
|
|
|
|
ret = sprintf(buf, "%s\n",
|
2009-12-17 19:01:37 +08:00
|
|
|
(twl->linkstat == USB_EVENT_VBUS) ? "on" : "off");
|
2008-12-19 04:25:44 +08:00
|
|
|
spin_unlock_irqrestore(&twl->lock, flags);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
|
|
|
|
|
|
|
|
static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
|
|
|
|
{
|
|
|
|
struct twl4030_usb *twl = _twl;
|
|
|
|
int status;
|
|
|
|
|
|
|
|
status = twl4030_usb_linkstat(twl);
|
2009-12-17 19:01:37 +08:00
|
|
|
if (status >= 0) {
|
2008-12-19 04:25:44 +08:00
|
|
|
/* FIXME add a set_power() method so that B-devices can
|
|
|
|
* configure the charger appropriately. It's not always
|
|
|
|
* correct to consume VBUS power, and how much current to
|
|
|
|
* consume is a function of the USB configuration chosen
|
|
|
|
* by the host.
|
|
|
|
*
|
|
|
|
* REVISIT usb_gadget_vbus_connect(...) as needed, ditto
|
|
|
|
* its disconnect() sibling, when changing to/from the
|
|
|
|
* USB_LINK_VBUS state. musb_hdrc won't care until it
|
|
|
|
* starts to handle softconnect right.
|
|
|
|
*/
|
2009-12-17 19:01:37 +08:00
|
|
|
if (status == USB_EVENT_NONE)
|
2008-12-19 04:25:44 +08:00
|
|
|
twl4030_phy_suspend(twl, 0);
|
|
|
|
else
|
|
|
|
twl4030_phy_resume(twl);
|
2009-11-21 01:32:53 +08:00
|
|
|
|
2009-12-17 19:01:37 +08:00
|
|
|
blocking_notifier_call_chain(&twl->otg.notifier, status,
|
|
|
|
twl->otg.gadget);
|
2008-12-19 04:25:44 +08:00
|
|
|
}
|
|
|
|
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int twl4030_set_suspend(struct otg_transceiver *x, int suspend)
|
|
|
|
{
|
|
|
|
struct twl4030_usb *twl = xceiv_to_twl(x);
|
|
|
|
|
|
|
|
if (suspend)
|
|
|
|
twl4030_phy_suspend(twl, 1);
|
|
|
|
else
|
|
|
|
twl4030_phy_resume(twl);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int twl4030_set_peripheral(struct otg_transceiver *x,
|
|
|
|
struct usb_gadget *gadget)
|
|
|
|
{
|
|
|
|
struct twl4030_usb *twl;
|
|
|
|
|
|
|
|
if (!x)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
twl = xceiv_to_twl(x);
|
|
|
|
twl->otg.gadget = gadget;
|
|
|
|
if (!gadget)
|
|
|
|
twl->otg.state = OTG_STATE_UNDEFINED;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int twl4030_set_host(struct otg_transceiver *x, struct usb_bus *host)
|
|
|
|
{
|
|
|
|
struct twl4030_usb *twl;
|
|
|
|
|
|
|
|
if (!x)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
twl = xceiv_to_twl(x);
|
|
|
|
twl->otg.host = host;
|
|
|
|
if (!host)
|
|
|
|
twl->otg.state = OTG_STATE_UNDEFINED;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-03-28 07:27:13 +08:00
|
|
|
static int __devinit twl4030_usb_probe(struct platform_device *pdev)
|
2008-12-19 04:25:44 +08:00
|
|
|
{
|
|
|
|
struct twl4030_usb_data *pdata = pdev->dev.platform_data;
|
|
|
|
struct twl4030_usb *twl;
|
2009-02-20 20:02:31 +08:00
|
|
|
int status, err;
|
2008-12-19 04:25:44 +08:00
|
|
|
|
|
|
|
if (!pdata) {
|
|
|
|
dev_dbg(&pdev->dev, "platform_data not available\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
twl = kzalloc(sizeof *twl, GFP_KERNEL);
|
|
|
|
if (!twl)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
twl->dev = &pdev->dev;
|
|
|
|
twl->irq = platform_get_irq(pdev, 0);
|
|
|
|
twl->otg.dev = twl->dev;
|
|
|
|
twl->otg.label = "twl4030";
|
|
|
|
twl->otg.set_host = twl4030_set_host;
|
|
|
|
twl->otg.set_peripheral = twl4030_set_peripheral;
|
|
|
|
twl->otg.set_suspend = twl4030_set_suspend;
|
|
|
|
twl->usb_mode = pdata->usb_mode;
|
|
|
|
twl->asleep = 1;
|
|
|
|
|
|
|
|
/* init spinlock for workqueue */
|
|
|
|
spin_lock_init(&twl->lock);
|
|
|
|
|
2009-02-20 20:02:31 +08:00
|
|
|
err = twl4030_usb_ldo_init(twl);
|
|
|
|
if (err) {
|
|
|
|
dev_err(&pdev->dev, "ldo init failed\n");
|
|
|
|
kfree(twl);
|
|
|
|
return err;
|
|
|
|
}
|
2008-12-19 04:25:44 +08:00
|
|
|
otg_set_transceiver(&twl->otg);
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, twl);
|
|
|
|
if (device_create_file(&pdev->dev, &dev_attr_vbus))
|
|
|
|
dev_warn(&pdev->dev, "could not create sysfs file\n");
|
|
|
|
|
2009-12-17 19:01:37 +08:00
|
|
|
BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
|
|
|
|
|
2008-12-19 04:25:44 +08:00
|
|
|
/* Our job is to use irqs and status from the power module
|
|
|
|
* to keep the transceiver disabled when nothing's connected.
|
|
|
|
*
|
|
|
|
* FIXME we actually shouldn't start enabling it until the
|
|
|
|
* USB controller drivers have said they're ready, by calling
|
|
|
|
* set_host() and/or set_peripheral() ... OTG_capable boards
|
|
|
|
* need both handles, otherwise just one suffices.
|
|
|
|
*/
|
|
|
|
twl->irq_enabled = true;
|
2009-12-28 19:02:48 +08:00
|
|
|
status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq,
|
2008-12-19 04:25:44 +08:00
|
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
|
|
"twl4030_usb", twl);
|
|
|
|
if (status < 0) {
|
|
|
|
dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
|
|
|
|
twl->irq, status);
|
|
|
|
kfree(twl);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* The IRQ handler just handles changes from the previous states
|
|
|
|
* of the ID and VBUS pins ... in probe() we must initialize that
|
|
|
|
* previous state. The easy way: fake an IRQ.
|
|
|
|
*
|
|
|
|
* REVISIT: a real IRQ might have happened already, if PREEMPT is
|
|
|
|
* enabled. Else the IRQ may not yet be configured or enabled,
|
|
|
|
* because of scheduling delays.
|
|
|
|
*/
|
|
|
|
twl4030_usb_irq(twl->irq, twl);
|
|
|
|
|
|
|
|
dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __exit twl4030_usb_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct twl4030_usb *twl = platform_get_drvdata(pdev);
|
|
|
|
int val;
|
|
|
|
|
|
|
|
free_irq(twl->irq, twl);
|
|
|
|
device_remove_file(twl->dev, &dev_attr_vbus);
|
|
|
|
|
|
|
|
/* set transceiver mode to power on defaults */
|
|
|
|
twl4030_usb_set_mode(twl, -1);
|
|
|
|
|
|
|
|
/* autogate 60MHz ULPI clock,
|
|
|
|
* clear dpll clock request for i2c access,
|
|
|
|
* disable 32KHz
|
|
|
|
*/
|
|
|
|
val = twl4030_usb_read(twl, PHY_CLK_CTRL);
|
|
|
|
if (val >= 0) {
|
|
|
|
val |= PHY_CLK_CTRL_CLOCKGATING_EN;
|
|
|
|
val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK);
|
|
|
|
twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* disable complete OTG block */
|
|
|
|
twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
|
|
|
|
|
|
|
|
twl4030_phy_power(twl, 0);
|
2009-02-20 20:02:31 +08:00
|
|
|
regulator_put(twl->usb1v5);
|
|
|
|
regulator_put(twl->usb1v8);
|
|
|
|
regulator_put(twl->usb3v1);
|
2008-12-19 04:25:44 +08:00
|
|
|
|
|
|
|
kfree(twl);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver twl4030_usb_driver = {
|
|
|
|
.probe = twl4030_usb_probe,
|
|
|
|
.remove = __exit_p(twl4030_usb_remove),
|
|
|
|
.driver = {
|
|
|
|
.name = "twl4030_usb",
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init twl4030_usb_init(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&twl4030_usb_driver);
|
|
|
|
}
|
|
|
|
subsys_initcall(twl4030_usb_init);
|
|
|
|
|
|
|
|
static void __exit twl4030_usb_exit(void)
|
|
|
|
{
|
|
|
|
platform_driver_unregister(&twl4030_usb_driver);
|
|
|
|
}
|
|
|
|
module_exit(twl4030_usb_exit);
|
|
|
|
|
|
|
|
MODULE_ALIAS("platform:twl4030_usb");
|
|
|
|
MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation");
|
|
|
|
MODULE_DESCRIPTION("TWL4030 USB transceiver driver");
|
|
|
|
MODULE_LICENSE("GPL");
|