linux/fs/seq_file.c

1112 lines
25 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/seq_file.c
*
* helper functions for making synthetic files from sequences of records.
* initial implementation -- AV, Oct 2001.
*/
#include <linux/cache.h>
#include <linux/fs.h>
#include <linux/export.h>
#include <linux/seq_file.h>
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/cred.h>
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
#include <linux/mm.h>
#include <linux/printk.h>
#include <linux/string_helpers.h>
#include <linux/uaccess.h>
#include <asm/page.h>
static struct kmem_cache *seq_file_cache __ro_after_init;
static void seq_set_overflow(struct seq_file *m)
{
m->count = m->size;
}
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
static void *seq_buf_alloc(unsigned long size)
{
return kvmalloc(size, GFP_KERNEL_ACCOUNT);
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
}
/**
* seq_open - initialize sequential file
* @file: file we initialize
* @op: method table describing the sequence
*
* seq_open() sets @file, associating it with a sequence described
* by @op. @op->start() sets the iterator up and returns the first
* element of sequence. @op->stop() shuts it down. @op->next()
* returns the next element of sequence. @op->show() prints element
* into the buffer. In case of error ->start() and ->next() return
* ERR_PTR(error). In the end of sequence they return %NULL. ->show()
* returns 0 in case of success and negative number in case of error.
* Returning SEQ_SKIP means "discard this element and move on".
* Note: seq_open() will allocate a struct seq_file and store its
* pointer in @file->private_data. This pointer should not be modified.
*/
int seq_open(struct file *file, const struct seq_operations *op)
{
struct seq_file *p;
WARN_ON(file->private_data);
p = kmem_cache_zalloc(seq_file_cache, GFP_KERNEL);
if (!p)
return -ENOMEM;
file->private_data = p;
mutex_init(&p->lock);
p->op = op;
// No refcounting: the lifetime of 'p' is constrained
// to the lifetime of the file.
p->file = file;
/*
* Wrappers around seq_open(e.g. swaps_open) need to be
* aware of this. If they set f_version themselves, they
* should call seq_open first and then set f_version.
*/
file->f_version = 0;
/*
* seq_files support lseek() and pread(). They do not implement
* write() at all, but we clear FMODE_PWRITE here for historical
* reasons.
*
* If a client of seq_files a) implements file.write() and b) wishes to
* support pwrite() then that client will need to implement its own
* file.open() which calls seq_open() and then sets FMODE_PWRITE.
*/
file->f_mode &= ~FMODE_PWRITE;
return 0;
}
EXPORT_SYMBOL(seq_open);
static int traverse(struct seq_file *m, loff_t offset)
{
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
loff_t pos = 0;
int error = 0;
void *p;
m->version = 0;
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
m->index = 0;
m->count = m->from = 0;
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
if (!offset)
return 0;
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
if (!m->buf) {
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
m->buf = seq_buf_alloc(m->size = PAGE_SIZE);
if (!m->buf)
return -ENOMEM;
}
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
p = m->op->start(m, &m->index);
while (p) {
error = PTR_ERR(p);
if (IS_ERR(p))
break;
error = m->op->show(m, p);
if (error < 0)
break;
if (unlikely(error)) {
error = 0;
m->count = 0;
}
if (seq_has_overflowed(m))
goto Eoverflow;
p = m->op->next(m, p, &m->index);
if (pos + m->count > offset) {
m->from = offset - pos;
m->count -= m->from;
break;
}
pos += m->count;
m->count = 0;
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
if (pos == offset)
break;
}
m->op->stop(m, p);
return error;
Eoverflow:
m->op->stop(m, p);
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
kvfree(m->buf);
m->count = 0;
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
m->buf = seq_buf_alloc(m->size <<= 1);
return !m->buf ? -ENOMEM : -EAGAIN;
}
/**
* seq_read - ->read() method for sequential files.
* @file: the file to read from
* @buf: the buffer to read to
* @size: the maximum number of bytes to read
* @ppos: the current position in the file
*
* Ready-made ->f_op->read()
*/
ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
{
struct seq_file *m = file->private_data;
size_t copied = 0;
size_t n;
void *p;
int err = 0;
mutex_lock(&m->lock);
/*
* seq_file->op->..m_start/m_stop/m_next may do special actions
* or optimisations based on the file->f_version, so we want to
* pass the file->f_version to those methods.
*
* seq_file->version is just copy of f_version, and seq_file
* methods can treat it simply as file version.
* It is copied in first and copied out after all operations.
* It is convenient to have it as part of structure to avoid the
* need of passing another argument to all the seq_file methods.
*/
m->version = file->f_version;
/*
* if request is to read from zero offset, reset iterator to first
* record as it might have been already advanced by previous requests
*/
if (*ppos == 0) {
m->index = 0;
m->version = 0;
m->count = 0;
}
/* Don't assume *ppos is where we left it */
if (unlikely(*ppos != m->read_pos)) {
while ((err = traverse(m, *ppos)) == -EAGAIN)
;
if (err) {
/* With prejudice... */
m->read_pos = 0;
m->version = 0;
m->index = 0;
m->count = 0;
goto Done;
} else {
m->read_pos = *ppos;
}
}
/* grab buffer if we didn't have one */
if (!m->buf) {
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
m->buf = seq_buf_alloc(m->size = PAGE_SIZE);
if (!m->buf)
goto Enomem;
}
/* if not empty - flush it first */
if (m->count) {
n = min(m->count, size);
err = copy_to_user(buf, m->buf + m->from, n);
if (err)
goto Efault;
m->count -= n;
m->from += n;
size -= n;
buf += n;
copied += n;
if (!size)
goto Done;
}
/* we need at least one record in buffer */
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
m->from = 0;
p = m->op->start(m, &m->index);
while (1) {
err = PTR_ERR(p);
if (!p || IS_ERR(p))
break;
err = m->op->show(m, p);
if (err < 0)
break;
if (unlikely(err))
m->count = 0;
if (unlikely(!m->count)) {
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
p = m->op->next(m, p, &m->index);
continue;
}
if (m->count < m->size)
goto Fill;
m->op->stop(m, p);
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
kvfree(m->buf);
m->count = 0;
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
m->buf = seq_buf_alloc(m->size <<= 1);
if (!m->buf)
goto Enomem;
m->version = 0;
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
p = m->op->start(m, &m->index);
}
m->op->stop(m, p);
m->count = 0;
goto Done;
Fill:
/* they want more? let's try to get some more */
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
while (1) {
size_t offs = m->count;
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
loff_t pos = m->index;
p = m->op->next(m, p, &m->index);
if (pos == m->index)
/* Buggy ->next function */
m->index++;
if (!p || IS_ERR(p)) {
err = PTR_ERR(p);
break;
}
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
if (m->count >= size)
break;
err = m->op->show(m, p);
if (seq_has_overflowed(m) || err) {
m->count = offs;
if (likely(err <= 0))
break;
}
}
m->op->stop(m, p);
n = min(m->count, size);
err = copy_to_user(buf, m->buf, n);
if (err)
goto Efault;
copied += n;
m->count -= n;
fs/seq_file.c: simplify seq_file iteration code and interface The documentation for seq_file suggests that it is necessary to be able to move the iterator to a given offset, however that is not the case. If the iterator is stored in the private data and is stable from one read() syscall to the next, it is only necessary to support first/next interactions. Implementing this in a client is a little clumsy. - if ->start() is given a pos of zero, it should go to start of sequence. - if ->start() is given the name pos that was given to the most recent next() or start(), it should restore the iterator to state just before that last call - if ->start is given another number, it should set the iterator one beyond the start just before the last ->start or ->next call. Also, the documentation says that the implementation can interpret the pos however it likes (other than zero meaning start), but seq_file increments the pos sometimes which does impose on the implementation. This patch simplifies the interface for first/next iteration and simplifies the code, while maintaining complete backward compatability. Now: - if ->start() is given a pos of zero, it should return an iterator placed at the start of the sequence - if ->start() is given a non-zero pos, it should return the iterator in the same state it was after the last ->start or ->next. This is particularly useful for interators which walk the multiple chains in a hash table, e.g. using rhashtable_walk*. See fs/gfs2/glock.c and drivers/staging/lustre/lustre/llite/vvp_dev.c A large part of achieving this is to *always* call ->next after ->show has successfully stored all of an entry in the buffer. Never just increment the index instead. Also: - always pass &m->index to ->start() and ->next(), never a temp variable - don't clear ->from when ->count is zero, as ->from is dead when ->count is zero. Some ->next functions do not increment *pos when they return NULL. To maintain compatability with this, we still need to increment m->index in one place, if ->next didn't increment it. Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps. This patch doesn't work around buggy next() functions for this case. [neilb@suse.com: ensure ->from is valid] Link: http://lkml.kernel.org/r/87601ryb8a.fsf@notabene.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.com> Acked-by: Jonathan Corbet <corbet@lwn.net> [docs] Tested-by: Jann Horn <jannh@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:44:41 +08:00
m->from = n;
Done:
if (!copied)
copied = err;
else {
*ppos += copied;
m->read_pos += copied;
}
file->f_version = m->version;
mutex_unlock(&m->lock);
return copied;
Enomem:
err = -ENOMEM;
goto Done;
Efault:
err = -EFAULT;
goto Done;
}
EXPORT_SYMBOL(seq_read);
/**
* seq_lseek - ->llseek() method for sequential files.
* @file: the file in question
* @offset: new position
* @whence: 0 for absolute, 1 for relative position
*
* Ready-made ->f_op->llseek()
*/
loff_t seq_lseek(struct file *file, loff_t offset, int whence)
{
struct seq_file *m = file->private_data;
loff_t retval = -EINVAL;
mutex_lock(&m->lock);
m->version = file->f_version;
switch (whence) {
case SEEK_CUR:
offset += file->f_pos;
fs: mark expected switch fall-throughs In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: fs/affs/affs.h:124:38: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/configfs/dir.c:1692:11: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/configfs/dir.c:1694:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ceph/file.c:249:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/hash.c:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/hash.c:246:15: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext2/inode.c:1237:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext2/inode.c:1244:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1182:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1188:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1432:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1440:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/f2fs/node.c:618:8: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/f2fs/node.c:620:8: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/btrfs/ref-verify.c:522:15: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/gfs2/bmap.c:711:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/gfs2/bmap.c:722:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/jffs2/fs.c:339:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/nfsd/nfs4proc.c:429:12: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ufs/util.h:62:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ufs/util.h:43:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/fcntl.c:770:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/seq_file.c:319:10: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/libfs.c:148:11: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/libfs.c:150:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/signalfd.c:178:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/locks.c:1473:16: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-01-23 16:48:28 +08:00
/* fall through */
case SEEK_SET:
if (offset < 0)
break;
retval = offset;
if (offset != m->read_pos) {
while ((retval = traverse(m, offset)) == -EAGAIN)
;
if (retval) {
/* with extreme prejudice... */
file->f_pos = 0;
m->read_pos = 0;
m->version = 0;
m->index = 0;
m->count = 0;
} else {
m->read_pos = offset;
retval = file->f_pos = offset;
}
} else {
file->f_pos = offset;
}
}
file->f_version = m->version;
mutex_unlock(&m->lock);
return retval;
}
EXPORT_SYMBOL(seq_lseek);
/**
* seq_release - free the structures associated with sequential file.
* @file: file in question
* @inode: its inode
*
* Frees the structures associated with sequential file; can be used
* as ->f_op->release() if you don't have private data to destroy.
*/
int seq_release(struct inode *inode, struct file *file)
{
struct seq_file *m = file->private_data;
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
kvfree(m->buf);
kmem_cache_free(seq_file_cache, m);
return 0;
}
EXPORT_SYMBOL(seq_release);
/**
* seq_escape - print string into buffer, escaping some characters
* @m: target buffer
* @s: string
* @esc: set of characters that need escaping
*
* Puts string into buffer, replacing each occurrence of character from
* @esc with usual octal escape.
* Use seq_has_overflowed() to check for errors.
*/
void seq_escape(struct seq_file *m, const char *s, const char *esc)
{
char *buf;
size_t size = seq_get_buf(m, &buf);
int ret;
ret = string_escape_str(s, buf, size, ESCAPE_OCTAL, esc);
seq_commit(m, ret < size ? ret : -1);
}
EXPORT_SYMBOL(seq_escape);
void seq_escape_mem_ascii(struct seq_file *m, const char *src, size_t isz)
{
char *buf;
size_t size = seq_get_buf(m, &buf);
int ret;
ret = string_escape_mem_ascii(src, isz, buf, size);
seq_commit(m, ret < size ? ret : -1);
}
EXPORT_SYMBOL(seq_escape_mem_ascii);
void seq_vprintf(struct seq_file *m, const char *f, va_list args)
{
int len;
if (m->count < m->size) {
len = vsnprintf(m->buf + m->count, m->size - m->count, f, args);
if (m->count + len < m->size) {
m->count += len;
return;
}
}
seq_set_overflow(m);
}
EXPORT_SYMBOL(seq_vprintf);
void seq_printf(struct seq_file *m, const char *f, ...)
{
va_list args;
va_start(args, f);
seq_vprintf(m, f, args);
va_end(args);
}
EXPORT_SYMBOL(seq_printf);
/**
* mangle_path - mangle and copy path to buffer beginning
* @s: buffer start
* @p: beginning of path in above buffer
* @esc: set of characters that need escaping
*
* Copy the path from @p to @s, replacing each occurrence of character from
* @esc with usual octal escape.
* Returns pointer past last written character in @s, or NULL in case of
* failure.
*/
char *mangle_path(char *s, const char *p, const char *esc)
{
while (s <= p) {
char c = *p++;
if (!c) {
return s;
} else if (!strchr(esc, c)) {
*s++ = c;
} else if (s + 4 > p) {
break;
} else {
*s++ = '\\';
*s++ = '0' + ((c & 0300) >> 6);
*s++ = '0' + ((c & 070) >> 3);
*s++ = '0' + (c & 07);
}
}
return NULL;
}
EXPORT_SYMBOL(mangle_path);
/**
* seq_path - seq_file interface to print a pathname
* @m: the seq_file handle
* @path: the struct path to print
* @esc: set of characters to escape in the output
*
* return the absolute path of 'path', as represented by the
* dentry / mnt pair in the path parameter.
*/
int seq_path(struct seq_file *m, const struct path *path, const char *esc)
{
char *buf;
size_t size = seq_get_buf(m, &buf);
int res = -1;
if (size) {
char *p = d_path(path, buf, size);
if (!IS_ERR(p)) {
char *end = mangle_path(buf, p, esc);
if (end)
res = end - buf;
}
}
seq_commit(m, res);
return res;
}
EXPORT_SYMBOL(seq_path);
/**
* seq_file_path - seq_file interface to print a pathname of a file
* @m: the seq_file handle
* @file: the struct file to print
* @esc: set of characters to escape in the output
*
* return the absolute path to the file.
*/
int seq_file_path(struct seq_file *m, struct file *file, const char *esc)
{
return seq_path(m, &file->f_path, esc);
}
EXPORT_SYMBOL(seq_file_path);
/*
* Same as seq_path, but relative to supplied root.
*/
int seq_path_root(struct seq_file *m, const struct path *path,
const struct path *root, const char *esc)
{
char *buf;
size_t size = seq_get_buf(m, &buf);
int res = -ENAMETOOLONG;
if (size) {
char *p;
p = __d_path(path, root, buf, size);
fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API __d_path() API is asking for trouble and in case of apparmor d_namespace_path() getting just that. The root cause is that when __d_path() misses the root it had been told to look for, it stores the location of the most remote ancestor in *root. Without grabbing references. Sure, at the moment of call it had been pinned down by what we have in *path. And if we raced with umount -l, we could have very well stopped at vfsmount/dentry that got freed as soon as prepend_path() dropped vfsmount_lock. It is safe to compare these pointers with pre-existing (and known to be still alive) vfsmount and dentry, as long as all we are asking is "is it the same address?". Dereferencing is not safe and apparmor ended up stepping into that. d_namespace_path() really wants to examine the place where we stopped, even if it's not connected to our namespace. As the result, it looked at ->d_sb->s_magic of a dentry that might've been already freed by that point. All other callers had been careful enough to avoid that, but it's really a bad interface - it invites that kind of trouble. The fix is fairly straightforward, even though it's bigger than I'd like: * prepend_path() root argument becomes const. * __d_path() is never called with NULL/NULL root. It was a kludge to start with. Instead, we have an explicit function - d_absolute_root(). Same as __d_path(), except that it doesn't get root passed and stops where it stops. apparmor and tomoyo are using it. * __d_path() returns NULL on path outside of root. The main caller is show_mountinfo() and that's precisely what we pass root for - to skip those outside chroot jail. Those who don't want that can (and do) use d_path(). * __d_path() root argument becomes const. Everyone agrees, I hope. * apparmor does *NOT* try to use __d_path() or any of its variants when it sees that path->mnt is an internal vfsmount. In that case it's definitely not mounted anywhere and dentry_path() is exactly what we want there. Handling of sysctl()-triggered weirdness is moved to that place. * if apparmor is asked to do pathname relative to chroot jail and __d_path() tells it we it's not in that jail, the sucker just calls d_absolute_path() instead. That's the other remaining caller of __d_path(), BTW. * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway - the normal seq_file logics will take care of growing the buffer and redoing the call of ->show() just fine). However, if it gets path not reachable from root, it returns SEQ_SKIP. The only caller adjusted (i.e. stopped ignoring the return value as it used to do). Reviewed-by: John Johansen <john.johansen@canonical.com> ACKed-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org
2011-12-05 21:43:34 +08:00
if (!p)
return SEQ_SKIP;
res = PTR_ERR(p);
if (!IS_ERR(p)) {
char *end = mangle_path(buf, p, esc);
if (end)
res = end - buf;
else
res = -ENAMETOOLONG;
}
}
seq_commit(m, res);
fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API __d_path() API is asking for trouble and in case of apparmor d_namespace_path() getting just that. The root cause is that when __d_path() misses the root it had been told to look for, it stores the location of the most remote ancestor in *root. Without grabbing references. Sure, at the moment of call it had been pinned down by what we have in *path. And if we raced with umount -l, we could have very well stopped at vfsmount/dentry that got freed as soon as prepend_path() dropped vfsmount_lock. It is safe to compare these pointers with pre-existing (and known to be still alive) vfsmount and dentry, as long as all we are asking is "is it the same address?". Dereferencing is not safe and apparmor ended up stepping into that. d_namespace_path() really wants to examine the place where we stopped, even if it's not connected to our namespace. As the result, it looked at ->d_sb->s_magic of a dentry that might've been already freed by that point. All other callers had been careful enough to avoid that, but it's really a bad interface - it invites that kind of trouble. The fix is fairly straightforward, even though it's bigger than I'd like: * prepend_path() root argument becomes const. * __d_path() is never called with NULL/NULL root. It was a kludge to start with. Instead, we have an explicit function - d_absolute_root(). Same as __d_path(), except that it doesn't get root passed and stops where it stops. apparmor and tomoyo are using it. * __d_path() returns NULL on path outside of root. The main caller is show_mountinfo() and that's precisely what we pass root for - to skip those outside chroot jail. Those who don't want that can (and do) use d_path(). * __d_path() root argument becomes const. Everyone agrees, I hope. * apparmor does *NOT* try to use __d_path() or any of its variants when it sees that path->mnt is an internal vfsmount. In that case it's definitely not mounted anywhere and dentry_path() is exactly what we want there. Handling of sysctl()-triggered weirdness is moved to that place. * if apparmor is asked to do pathname relative to chroot jail and __d_path() tells it we it's not in that jail, the sucker just calls d_absolute_path() instead. That's the other remaining caller of __d_path(), BTW. * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway - the normal seq_file logics will take care of growing the buffer and redoing the call of ->show() just fine). However, if it gets path not reachable from root, it returns SEQ_SKIP. The only caller adjusted (i.e. stopped ignoring the return value as it used to do). Reviewed-by: John Johansen <john.johansen@canonical.com> ACKed-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org
2011-12-05 21:43:34 +08:00
return res < 0 && res != -ENAMETOOLONG ? res : 0;
}
/*
* returns the path of the 'dentry' from the root of its filesystem.
*/
int seq_dentry(struct seq_file *m, struct dentry *dentry, const char *esc)
{
char *buf;
size_t size = seq_get_buf(m, &buf);
int res = -1;
if (size) {
char *p = dentry_path(dentry, buf, size);
if (!IS_ERR(p)) {
char *end = mangle_path(buf, p, esc);
if (end)
res = end - buf;
}
}
seq_commit(m, res);
return res;
}
EXPORT_SYMBOL(seq_dentry);
static void *single_start(struct seq_file *p, loff_t *pos)
{
return NULL + (*pos == 0);
}
static void *single_next(struct seq_file *p, void *v, loff_t *pos)
{
++*pos;
return NULL;
}
static void single_stop(struct seq_file *p, void *v)
{
}
int single_open(struct file *file, int (*show)(struct seq_file *, void *),
void *data)
{
struct seq_operations *op = kmalloc(sizeof(*op), GFP_KERNEL_ACCOUNT);
int res = -ENOMEM;
if (op) {
op->start = single_start;
op->next = single_next;
op->stop = single_stop;
op->show = show;
res = seq_open(file, op);
if (!res)
((struct seq_file *)file->private_data)->private = data;
else
kfree(op);
}
return res;
}
EXPORT_SYMBOL(single_open);
int single_open_size(struct file *file, int (*show)(struct seq_file *, void *),
void *data, size_t size)
{
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
char *buf = seq_buf_alloc(size);
int ret;
if (!buf)
return -ENOMEM;
ret = single_open(file, show, data);
if (ret) {
fs/seq_file: fallback to vmalloc allocation There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 06:22:37 +08:00
kvfree(buf);
return ret;
}
((struct seq_file *)file->private_data)->buf = buf;
((struct seq_file *)file->private_data)->size = size;
return 0;
}
EXPORT_SYMBOL(single_open_size);
int single_release(struct inode *inode, struct file *file)
{
const struct seq_operations *op = ((struct seq_file *)file->private_data)->op;
int res = seq_release(inode, file);
kfree(op);
return res;
}
EXPORT_SYMBOL(single_release);
int seq_release_private(struct inode *inode, struct file *file)
{
struct seq_file *seq = file->private_data;
kfree(seq->private);
seq->private = NULL;
return seq_release(inode, file);
}
EXPORT_SYMBOL(seq_release_private);
void *__seq_open_private(struct file *f, const struct seq_operations *ops,
int psize)
{
int rc;
void *private;
struct seq_file *seq;
private = kzalloc(psize, GFP_KERNEL_ACCOUNT);
if (private == NULL)
goto out;
rc = seq_open(f, ops);
if (rc < 0)
goto out_free;
seq = f->private_data;
seq->private = private;
return private;
out_free:
kfree(private);
out:
return NULL;
}
EXPORT_SYMBOL(__seq_open_private);
int seq_open_private(struct file *filp, const struct seq_operations *ops,
int psize)
{
return __seq_open_private(filp, ops, psize) ? 0 : -ENOMEM;
}
EXPORT_SYMBOL(seq_open_private);
void seq_putc(struct seq_file *m, char c)
{
if (m->count >= m->size)
return;
m->buf[m->count++] = c;
}
EXPORT_SYMBOL(seq_putc);
void seq_puts(struct seq_file *m, const char *s)
{
int len = strlen(s);
if (m->count + len >= m->size) {
seq_set_overflow(m);
return;
}
memcpy(m->buf + m->count, s, len);
m->count += len;
}
EXPORT_SYMBOL(seq_puts);
/**
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
* A helper routine for putting decimal numbers without rich format of printf().
* only 'unsigned long long' is supported.
* @m: seq_file identifying the buffer to which data should be written
* @delimiter: a string which is printed before the number
* @num: the number
* @width: a minimum field width
*
* This routine will put strlen(delimiter) + number into seq_filed.
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
* This routine is very quick when you show lots of numbers.
* In usual cases, it will be better to use seq_printf(). It's easier to read.
*/
void seq_put_decimal_ull_width(struct seq_file *m, const char *delimiter,
unsigned long long num, unsigned int width)
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
{
int len;
if (m->count + 2 >= m->size) /* we'll write 2 bytes at least */
goto overflow;
if (delimiter && delimiter[0]) {
if (delimiter[1] == 0)
seq_putc(m, delimiter[0]);
else
seq_puts(m, delimiter);
}
if (!width)
width = 1;
if (m->count + width >= m->size)
goto overflow;
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
len = num_to_str(m->buf + m->count, m->size - m->count, num, width);
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
if (!len)
goto overflow;
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
m->count += len;
return;
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
overflow:
seq_set_overflow(m);
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
}
void seq_put_decimal_ull(struct seq_file *m, const char *delimiter,
unsigned long long num)
{
return seq_put_decimal_ull_width(m, delimiter, num, 0);
}
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
EXPORT_SYMBOL(seq_put_decimal_ull);
procfs: add seq_put_hex_ll to speed up /proc/pid/maps seq_put_hex_ll() prints a number in hexadecimal notation and works faster than seq_printf(). == test.py num = 0 with open("/proc/1/maps") as f: while num < 10000 : data = f.read() f.seek(0, 0) num = num + 1 == == Before patch == $ time python test.py real 0m1.561s user 0m0.257s sys 0m1.302s == After patch == $ time python test.py real 0m0.986s user 0m0.279s sys 0m0.707s $ perf -g record python test.py: == Before patch == - 67.42% 2.82% python [kernel.kallsyms] [k] show_map_vma.isra.22 - 64.60% show_map_vma.isra.22 - 44.98% seq_printf - seq_vprintf - vsnprintf + 14.85% number + 12.22% format_decode 5.56% memcpy_erms + 15.06% seq_path + 4.42% seq_pad + 2.45% __GI___libc_read == After patch == - 47.35% 3.38% python [kernel.kallsyms] [k] show_map_vma.isra.23 - 43.97% show_map_vma.isra.23 + 20.84% seq_path - 15.73% show_vma_header_prefix 10.55% seq_put_hex_ll + 2.65% seq_put_decimal_ull 0.95% seq_putc + 6.96% seq_pad + 2.94% __GI___libc_read [avagin@openvz.org: use unsigned int instead of int where it is suitable] Link: http://lkml.kernel.org/r/20180214025619.4005-1-avagin@openvz.org [avagin@openvz.org: v2] Link: http://lkml.kernel.org/r/20180117082050.25406-1-avagin@openvz.org Link: http://lkml.kernel.org/r/20180112185812.7710-1-avagin@openvz.org Signed-off-by: Andrei Vagin <avagin@openvz.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11 07:30:44 +08:00
/**
* seq_put_hex_ll - put a number in hexadecimal notation
* @m: seq_file identifying the buffer to which data should be written
* @delimiter: a string which is printed before the number
* @v: the number
* @width: a minimum field width
*
* seq_put_hex_ll(m, "", v, 8) is equal to seq_printf(m, "%08llx", v)
*
* This routine is very quick when you show lots of numbers.
* In usual cases, it will be better to use seq_printf(). It's easier to read.
*/
void seq_put_hex_ll(struct seq_file *m, const char *delimiter,
unsigned long long v, unsigned int width)
{
unsigned int len;
int i;
if (delimiter && delimiter[0]) {
if (delimiter[1] == 0)
seq_putc(m, delimiter[0]);
else
seq_puts(m, delimiter);
}
/* If x is 0, the result of __builtin_clzll is undefined */
if (v == 0)
len = 1;
else
len = (sizeof(v) * 8 - __builtin_clzll(v) + 3) / 4;
if (len < width)
len = width;
if (m->count + len > m->size) {
seq_set_overflow(m);
return;
}
for (i = len - 1; i >= 0; i--) {
m->buf[m->count + i] = hex_asc[0xf & v];
v = v >> 4;
}
m->count += len;
}
void seq_put_decimal_ll(struct seq_file *m, const char *delimiter, long long num)
{
int len;
if (m->count + 3 >= m->size) /* we'll write 2 bytes at least */
goto overflow;
if (delimiter && delimiter[0]) {
if (delimiter[1] == 0)
seq_putc(m, delimiter[0]);
else
seq_puts(m, delimiter);
}
if (m->count + 2 >= m->size)
goto overflow;
if (num < 0) {
m->buf[m->count++] = '-';
num = -num;
}
if (num < 10) {
m->buf[m->count++] = num + '0';
return;
}
len = num_to_str(m->buf + m->count, m->size - m->count, num, 0);
if (!len)
goto overflow;
m->count += len;
return;
overflow:
seq_set_overflow(m);
}
EXPORT_SYMBOL(seq_put_decimal_ll);
/**
* seq_write - write arbitrary data to buffer
* @seq: seq_file identifying the buffer to which data should be written
* @data: data address
* @len: number of bytes
*
* Return 0 on success, non-zero otherwise.
*/
int seq_write(struct seq_file *seq, const void *data, size_t len)
{
if (seq->count + len < seq->size) {
memcpy(seq->buf + seq->count, data, len);
seq->count += len;
return 0;
}
seq_set_overflow(seq);
return -1;
}
EXPORT_SYMBOL(seq_write);
/**
* seq_pad - write padding spaces to buffer
* @m: seq_file identifying the buffer to which data should be written
* @c: the byte to append after padding if non-zero
*/
void seq_pad(struct seq_file *m, char c)
{
int size = m->pad_until - m->count;
if (size > 0) {
if (size + m->count > m->size) {
seq_set_overflow(m);
return;
}
memset(m->buf + m->count, ' ', size);
m->count += size;
}
if (c)
seq_putc(m, c);
}
EXPORT_SYMBOL(seq_pad);
/* A complete analogue of print_hex_dump() */
void seq_hex_dump(struct seq_file *m, const char *prefix_str, int prefix_type,
int rowsize, int groupsize, const void *buf, size_t len,
bool ascii)
{
const u8 *ptr = buf;
int i, linelen, remaining = len;
char *buffer;
size_t size;
int ret;
if (rowsize != 16 && rowsize != 32)
rowsize = 16;
for (i = 0; i < len && !seq_has_overflowed(m); i += rowsize) {
linelen = min(remaining, rowsize);
remaining -= rowsize;
switch (prefix_type) {
case DUMP_PREFIX_ADDRESS:
seq_printf(m, "%s%p: ", prefix_str, ptr + i);
break;
case DUMP_PREFIX_OFFSET:
seq_printf(m, "%s%.8x: ", prefix_str, i);
break;
default:
seq_printf(m, "%s", prefix_str);
break;
}
size = seq_get_buf(m, &buffer);
ret = hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize,
buffer, size, ascii);
seq_commit(m, ret < size ? ret : -1);
seq_putc(m, '\n');
}
}
EXPORT_SYMBOL(seq_hex_dump);
struct list_head *seq_list_start(struct list_head *head, loff_t pos)
{
struct list_head *lh;
list_for_each(lh, head)
if (pos-- == 0)
return lh;
return NULL;
}
EXPORT_SYMBOL(seq_list_start);
struct list_head *seq_list_start_head(struct list_head *head, loff_t pos)
{
if (!pos)
return head;
return seq_list_start(head, pos - 1);
}
EXPORT_SYMBOL(seq_list_start_head);
struct list_head *seq_list_next(void *v, struct list_head *head, loff_t *ppos)
{
struct list_head *lh;
lh = ((struct list_head *)v)->next;
++*ppos;
return lh == head ? NULL : lh;
}
EXPORT_SYMBOL(seq_list_next);
/**
* seq_hlist_start - start an iteration of a hlist
* @head: the head of the hlist
* @pos: the start position of the sequence
*
* Called at seq_file->op->start().
*/
struct hlist_node *seq_hlist_start(struct hlist_head *head, loff_t pos)
{
struct hlist_node *node;
hlist_for_each(node, head)
if (pos-- == 0)
return node;
return NULL;
}
EXPORT_SYMBOL(seq_hlist_start);
/**
* seq_hlist_start_head - start an iteration of a hlist
* @head: the head of the hlist
* @pos: the start position of the sequence
*
* Called at seq_file->op->start(). Call this function if you want to
* print a header at the top of the output.
*/
struct hlist_node *seq_hlist_start_head(struct hlist_head *head, loff_t pos)
{
if (!pos)
return SEQ_START_TOKEN;
return seq_hlist_start(head, pos - 1);
}
EXPORT_SYMBOL(seq_hlist_start_head);
/**
* seq_hlist_next - move to the next position of the hlist
* @v: the current iterator
* @head: the head of the hlist
* @ppos: the current position
*
* Called at seq_file->op->next().
*/
struct hlist_node *seq_hlist_next(void *v, struct hlist_head *head,
loff_t *ppos)
{
struct hlist_node *node = v;
++*ppos;
if (v == SEQ_START_TOKEN)
return head->first;
else
return node->next;
}
EXPORT_SYMBOL(seq_hlist_next);
/**
* seq_hlist_start_rcu - start an iteration of a hlist protected by RCU
* @head: the head of the hlist
* @pos: the start position of the sequence
*
* Called at seq_file->op->start().
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
struct hlist_node *seq_hlist_start_rcu(struct hlist_head *head,
loff_t pos)
{
struct hlist_node *node;
__hlist_for_each_rcu(node, head)
if (pos-- == 0)
return node;
return NULL;
}
EXPORT_SYMBOL(seq_hlist_start_rcu);
/**
* seq_hlist_start_head_rcu - start an iteration of a hlist protected by RCU
* @head: the head of the hlist
* @pos: the start position of the sequence
*
* Called at seq_file->op->start(). Call this function if you want to
* print a header at the top of the output.
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
struct hlist_node *seq_hlist_start_head_rcu(struct hlist_head *head,
loff_t pos)
{
if (!pos)
return SEQ_START_TOKEN;
return seq_hlist_start_rcu(head, pos - 1);
}
EXPORT_SYMBOL(seq_hlist_start_head_rcu);
/**
* seq_hlist_next_rcu - move to the next position of the hlist protected by RCU
* @v: the current iterator
* @head: the head of the hlist
* @ppos: the current position
*
* Called at seq_file->op->next().
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
struct hlist_node *seq_hlist_next_rcu(void *v,
struct hlist_head *head,
loff_t *ppos)
{
struct hlist_node *node = v;
++*ppos;
if (v == SEQ_START_TOKEN)
return rcu_dereference(head->first);
else
return rcu_dereference(node->next);
}
EXPORT_SYMBOL(seq_hlist_next_rcu);
/**
* seq_hlist_start_precpu - start an iteration of a percpu hlist array
* @head: pointer to percpu array of struct hlist_heads
* @cpu: pointer to cpu "cursor"
* @pos: start position of sequence
*
* Called at seq_file->op->start().
*/
struct hlist_node *
seq_hlist_start_percpu(struct hlist_head __percpu *head, int *cpu, loff_t pos)
{
struct hlist_node *node;
for_each_possible_cpu(*cpu) {
hlist_for_each(node, per_cpu_ptr(head, *cpu)) {
if (pos-- == 0)
return node;
}
}
return NULL;
}
EXPORT_SYMBOL(seq_hlist_start_percpu);
/**
* seq_hlist_next_percpu - move to the next position of the percpu hlist array
* @v: pointer to current hlist_node
* @head: pointer to percpu array of struct hlist_heads
* @cpu: pointer to cpu "cursor"
* @pos: start position of sequence
*
* Called at seq_file->op->next().
*/
struct hlist_node *
seq_hlist_next_percpu(void *v, struct hlist_head __percpu *head,
int *cpu, loff_t *pos)
{
struct hlist_node *node = v;
++*pos;
if (node->next)
return node->next;
for (*cpu = cpumask_next(*cpu, cpu_possible_mask); *cpu < nr_cpu_ids;
*cpu = cpumask_next(*cpu, cpu_possible_mask)) {
struct hlist_head *bucket = per_cpu_ptr(head, *cpu);
if (!hlist_empty(bucket))
return bucket->first;
}
return NULL;
}
EXPORT_SYMBOL(seq_hlist_next_percpu);
void __init seq_file_init(void)
{
seq_file_cache = KMEM_CACHE(seq_file, SLAB_ACCOUNT|SLAB_PANIC);
}