linux/arch/x86/hyperv/hv_init.c

531 lines
14 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* X86 specific Hyper-V initialization code.
*
* Copyright (C) 2016, Microsoft, Inc.
*
* Author : K. Y. Srinivasan <kys@microsoft.com>
*/
x86/hyperv: Implement hv_is_hibernation_supported() The API will be used by the hv_balloon and hv_vmbus drivers. Balloon up/down and hot-add of memory must not be active if the user wants the Linux VM to support hibernation, because they are incompatible with hibernation according to Hyper-V team, e.g. upon suspend the balloon VSP doesn't save any info about the ballooned-out pages (if any); so, after Linux resumes, Linux balloon VSC expects that the VSP will return the pages if Linux is under memory pressure, but the VSP will never do that, since the VSP thinks it never stole the pages from the VM. So, if the user wants Linux VM to support hibernation, Linux must forbid balloon up/down and hot-add, and the only functionality of the balloon VSC driver is reporting the VM's memory pressure to the host. Ideally, when Linux detects that the user wants it to support hibernation, the balloon VSC should tell the VSP that it does not support ballooning and hot-add. However, the current version of the VSP requires the VSC should support these capabilities, otherwise the capability negotiation fails and the VSC can not load at all, so with the later changes to the VSC driver, Linux VM still reports to the VSP that the VSC supports these capabilities, but the VSC ignores the VSP's requests of balloon up/down and hot add, and reports an error to the VSP, when applicable. BTW, in the future the balloon VSP driver will allow the VSC to not support the capabilities of balloon up/down and hot add. The ACPI S4 state is not a must for hibernation to work, because Linux is able to hibernate as long as the system can shut down. However in practice we decide to artificially use the presence of the virtual ACPI S4 state as an indicator of the user's intent of using hibernation, because Linux VM must find a way to know if the user wants to use the hibernation feature or not. By default, Hyper-V does not enable the virtual ACPI S4 state; on recent Hyper-V hosts (e.g. RS5, 19H1), the administrator is able to enable the state for a VM by WMI commands. Once all the vmbus and VSC patches for the hibernation feature are accepted, an extra patch will be submitted to forbid hibernation if the virtual ACPI S4 state is absent, i.e. hv_is_hibernation_supported() is false. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20 15:16:04 +08:00
#include <linux/acpi.h>
#include <linux/efi.h>
#include <linux/types.h>
x86/hyperv: Reenlightenment notifications support Hyper-V supports Live Migration notification. This is supposed to be used in conjunction with TSC emulation: when a VM is migrated to a host with different TSC frequency for some short period the host emulates the accesses to TSC and sends an interrupt to notify about the event. When the guest is done updating everything it can disable TSC emulation and everything will start working fast again. These notifications weren't required until now as Hyper-V guests are not supposed to use TSC as a clocksource: in Linux the TSC is even marked as unstable on boot. Guests normally use 'tsc page' clocksource and host updates its values on migrations automatically. Things change when with nested virtualization: even when the PV clocksources (kvm-clock or tsc page) are passed through to the nested guests the TSC frequency and frequency changes need to be know.. Hyper-V Top Level Functional Specification (as of v5.0b) wrongly specifies EAX:BIT(12) of CPUID:0x40000009 as the feature identification bit. The right one to check is EAX:BIT(13) of CPUID:0x40000003. I was assured that the fix in on the way. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: devel@linuxdriverproject.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Mohammed Gamal <mmorsy@redhat.com> Link: https://lkml.kernel.org/r/20180124132337.30138-4-vkuznets@redhat.com
2018-01-24 21:23:33 +08:00
#include <asm/apic.h>
#include <asm/desc.h>
#include <asm/hypervisor.h>
#include <asm/hyperv-tlfs.h>
#include <asm/mshyperv.h>
#include <asm/idtentry.h>
#include <linux/version.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <linux/hyperv.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/cpuhotplug.h>
#include <linux/syscore_ops.h>
clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic Continue consolidating Hyper-V clock and timer code into an ISA independent Hyper-V clocksource driver. Move the existing clocksource code under drivers/hv and arch/x86 to the new clocksource driver while separating out the ISA dependencies. Update Hyper-V initialization to call initialization and cleanup routines since the Hyper-V synthetic clock is not independently enumerated in ACPI. Update Hyper-V clocksource users in KVM and VDSO to get definitions from the new include file. No behavior is changed and no new functionality is added. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "bp@alien8.de" <bp@alien8.de> Cc: "will.deacon@arm.com" <will.deacon@arm.com> Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com> Cc: "mark.rutland@arm.com" <mark.rutland@arm.com> Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org> Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org> Cc: "olaf@aepfle.de" <olaf@aepfle.de> Cc: "apw@canonical.com" <apw@canonical.com> Cc: "jasowang@redhat.com" <jasowang@redhat.com> Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com> Cc: Sunil Muthuswamy <sunilmut@microsoft.com> Cc: KY Srinivasan <kys@microsoft.com> Cc: "sashal@kernel.org" <sashal@kernel.org> Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com> Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org> Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org> Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org> Cc: "arnd@arndb.de" <arnd@arndb.de> Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk> Cc: "ralf@linux-mips.org" <ralf@linux-mips.org> Cc: "paul.burton@mips.com" <paul.burton@mips.com> Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org> Cc: "salyzyn@android.com" <salyzyn@android.com> Cc: "pcc@google.com" <pcc@google.com> Cc: "shuah@kernel.org" <shuah@kernel.org> Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com> Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk> Cc: "huw@codeweavers.com" <huw@codeweavers.com> Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au> Cc: "pbonzini@redhat.com" <pbonzini@redhat.com> Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com> Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org> Link: https://lkml.kernel.org/r/1561955054-1838-3-git-send-email-mikelley@microsoft.com
2019-07-01 12:26:06 +08:00
#include <clocksource/hyperv_timer.h>
void *hv_hypercall_pg;
EXPORT_SYMBOL_GPL(hv_hypercall_pg);
/* Storage to save the hypercall page temporarily for hibernation */
static void *hv_hypercall_pg_saved;
u32 *hv_vp_index;
EXPORT_SYMBOL_GPL(hv_vp_index);
struct hv_vp_assist_page **hv_vp_assist_page;
EXPORT_SYMBOL_GPL(hv_vp_assist_page);
void __percpu **hyperv_pcpu_input_arg;
EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg);
u32 hv_max_vp_index;
EXPORT_SYMBOL_GPL(hv_max_vp_index);
void *hv_alloc_hyperv_page(void)
{
BUILD_BUG_ON(PAGE_SIZE != HV_HYP_PAGE_SIZE);
return (void *)__get_free_page(GFP_KERNEL);
}
EXPORT_SYMBOL_GPL(hv_alloc_hyperv_page);
void *hv_alloc_hyperv_zeroed_page(void)
{
BUILD_BUG_ON(PAGE_SIZE != HV_HYP_PAGE_SIZE);
return (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
}
EXPORT_SYMBOL_GPL(hv_alloc_hyperv_zeroed_page);
void hv_free_hyperv_page(unsigned long addr)
{
free_page(addr);
}
EXPORT_SYMBOL_GPL(hv_free_hyperv_page);
static int hv_cpu_init(unsigned int cpu)
{
u64 msr_vp_index;
struct hv_vp_assist_page **hvp = &hv_vp_assist_page[smp_processor_id()];
void **input_arg;
struct page *pg;
input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
x86/hyperv: Suspend/resume the VP assist page for hibernation Unlike the other CPUs, CPU0 is never offlined during hibernation, so in the resume path, the "new" kernel's VP assist page is not suspended (i.e. not disabled), and later when we jump to the "old" kernel, the page is not properly re-enabled for CPU0 with the allocated page from the old kernel. So far, the VP assist page is used by hv_apic_eoi_write(), and is also used in the case of nested virtualization (running KVM atop Hyper-V). For hv_apic_eoi_write(), when the page is not properly re-enabled, hvp->apic_assist is always 0, so the HV_X64_MSR_EOI MSR is always written. This is not ideal with respect to performance, but Hyper-V can still correctly handle this according to the Hyper-V spec; nevertheless, Linux still must update the Hyper-V hypervisor with the correct VP assist page to prevent Hyper-V from writing to the stale page, which causes guest memory corruption and consequently may have caused the hangs and triple faults seen during non-boot CPUs resume. Fix the issue by calling hv_cpu_die()/hv_cpu_init() in the syscore ops. Without the fix, hibernation can fail at a rate of 1/300 ~ 1/500. With the fix, hibernation can pass a long-haul test of 2000 runs. In the case of nested virtualization, disabling/reenabling the assist page upon hibernation may be unsafe if there are active L2 guests. It looks KVM should be enhanced to abort the hibernation request if there is any active L2 guest. Fixes: 05bd330a7fd8 ("x86/hyperv: Suspend/resume the hypercall page for hibernation") Cc: stable@vger.kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1587437171-2472-1-git-send-email-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-21 10:46:11 +08:00
/* hv_cpu_init() can be called with IRQs disabled from hv_resume() */
pg = alloc_page(irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
if (unlikely(!pg))
return -ENOMEM;
*input_arg = page_address(pg);
hv_get_vp_index(msr_vp_index);
hv_vp_index[smp_processor_id()] = msr_vp_index;
if (msr_vp_index > hv_max_vp_index)
hv_max_vp_index = msr_vp_index;
if (!hv_vp_assist_page)
return 0;
x86/hyper-v: Zero out the VP ASSIST PAGE on allocation The VP ASSIST PAGE is an "overlay" page (see Hyper-V TLFS's Section 5.2.1 "GPA Overlay Pages" for the details) and here is an excerpt: "The hypervisor defines several special pages that "overlay" the guest's Guest Physical Addresses (GPA) space. Overlays are addressed GPA but are not included in the normal GPA map maintained internally by the hypervisor. Conceptually, they exist in a separate map that overlays the GPA map. If a page within the GPA space is overlaid, any SPA page mapped to the GPA page is effectively "obscured" and generally unreachable by the virtual processor through processor memory accesses. If an overlay page is disabled, the underlying GPA page is "uncovered", and an existing mapping becomes accessible to the guest." SPA = System Physical Address = the final real physical address. When a CPU (e.g. CPU1) is onlined, hv_cpu_init() allocates the VP ASSIST PAGE and enables the EOI optimization for this CPU by writing the MSR HV_X64_MSR_VP_ASSIST_PAGE. From now on, hvp->apic_assist belongs to the special SPA page, and this CPU *always* uses hvp->apic_assist (which is shared with the hypervisor) to decide if it needs to write the EOI MSR. When a CPU is offlined then on the outgoing CPU: 1. hv_cpu_die() disables the EOI optimizaton for this CPU, and from now on hvp->apic_assist belongs to the original "normal" SPA page; 2. the remaining work of stopping this CPU is done 3. this CPU is completely stopped. Between 1 and 3, this CPU can still receive interrupts (e.g. reschedule IPIs from CPU0, and Local APIC timer interrupts), and this CPU *must* write the EOI MSR for every interrupt received, otherwise the hypervisor may not deliver further interrupts, which may be needed to completely stop the CPU. So, after the EOI optimization is disabled in hv_cpu_die(), it's required that the hvp->apic_assist's bit0 is zero, which is not guaranteed by the current allocation mode because it lacks __GFP_ZERO. As a consequence the bit might be set and interrupt handling would not write the EOI MSR causing interrupt delivery to become stuck. Add the missing __GFP_ZERO to the allocation. Note 1: after the "normal" SPA page is allocted and zeroed out, neither the hypervisor nor the guest writes into the page, so the page remains with zeros. Note 2: see Section 10.3.5 "EOI Assist" for the details of the EOI optimization. When the optimization is enabled, the guest can still write the EOI MSR register irrespective of the "No EOI required" value, but that's slower than the optimized assist based variant. Fixes: ba696429d290 ("x86/hyper-v: Implement EOI assist") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/ <PU1P153MB0169B716A637FABF07433C04BFCB0@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM
2019-07-19 11:22:35 +08:00
/*
* The VP ASSIST PAGE is an "overlay" page (see Hyper-V TLFS's Section
* 5.2.1 "GPA Overlay Pages"). Here it must be zeroed out to make sure
* we always write the EOI MSR in hv_apic_eoi_write() *after* the
* EOI optimization is disabled in hv_cpu_die(), otherwise a CPU may
* not be stopped in the case of CPU offlining and the VM will hang.
*/
if (!*hvp) {
2020-06-02 12:51:40 +08:00
*hvp = __vmalloc(PAGE_SIZE, GFP_KERNEL | __GFP_ZERO);
x86/hyper-v: Zero out the VP ASSIST PAGE on allocation The VP ASSIST PAGE is an "overlay" page (see Hyper-V TLFS's Section 5.2.1 "GPA Overlay Pages" for the details) and here is an excerpt: "The hypervisor defines several special pages that "overlay" the guest's Guest Physical Addresses (GPA) space. Overlays are addressed GPA but are not included in the normal GPA map maintained internally by the hypervisor. Conceptually, they exist in a separate map that overlays the GPA map. If a page within the GPA space is overlaid, any SPA page mapped to the GPA page is effectively "obscured" and generally unreachable by the virtual processor through processor memory accesses. If an overlay page is disabled, the underlying GPA page is "uncovered", and an existing mapping becomes accessible to the guest." SPA = System Physical Address = the final real physical address. When a CPU (e.g. CPU1) is onlined, hv_cpu_init() allocates the VP ASSIST PAGE and enables the EOI optimization for this CPU by writing the MSR HV_X64_MSR_VP_ASSIST_PAGE. From now on, hvp->apic_assist belongs to the special SPA page, and this CPU *always* uses hvp->apic_assist (which is shared with the hypervisor) to decide if it needs to write the EOI MSR. When a CPU is offlined then on the outgoing CPU: 1. hv_cpu_die() disables the EOI optimizaton for this CPU, and from now on hvp->apic_assist belongs to the original "normal" SPA page; 2. the remaining work of stopping this CPU is done 3. this CPU is completely stopped. Between 1 and 3, this CPU can still receive interrupts (e.g. reschedule IPIs from CPU0, and Local APIC timer interrupts), and this CPU *must* write the EOI MSR for every interrupt received, otherwise the hypervisor may not deliver further interrupts, which may be needed to completely stop the CPU. So, after the EOI optimization is disabled in hv_cpu_die(), it's required that the hvp->apic_assist's bit0 is zero, which is not guaranteed by the current allocation mode because it lacks __GFP_ZERO. As a consequence the bit might be set and interrupt handling would not write the EOI MSR causing interrupt delivery to become stuck. Add the missing __GFP_ZERO to the allocation. Note 1: after the "normal" SPA page is allocted and zeroed out, neither the hypervisor nor the guest writes into the page, so the page remains with zeros. Note 2: see Section 10.3.5 "EOI Assist" for the details of the EOI optimization. When the optimization is enabled, the guest can still write the EOI MSR register irrespective of the "No EOI required" value, but that's slower than the optimized assist based variant. Fixes: ba696429d290 ("x86/hyper-v: Implement EOI assist") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/ <PU1P153MB0169B716A637FABF07433C04BFCB0@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM
2019-07-19 11:22:35 +08:00
}
if (*hvp) {
u64 val;
val = vmalloc_to_pfn(*hvp);
val = (val << HV_X64_MSR_VP_ASSIST_PAGE_ADDRESS_SHIFT) |
HV_X64_MSR_VP_ASSIST_PAGE_ENABLE;
wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE, val);
}
return 0;
}
x86/hyperv: Reenlightenment notifications support Hyper-V supports Live Migration notification. This is supposed to be used in conjunction with TSC emulation: when a VM is migrated to a host with different TSC frequency for some short period the host emulates the accesses to TSC and sends an interrupt to notify about the event. When the guest is done updating everything it can disable TSC emulation and everything will start working fast again. These notifications weren't required until now as Hyper-V guests are not supposed to use TSC as a clocksource: in Linux the TSC is even marked as unstable on boot. Guests normally use 'tsc page' clocksource and host updates its values on migrations automatically. Things change when with nested virtualization: even when the PV clocksources (kvm-clock or tsc page) are passed through to the nested guests the TSC frequency and frequency changes need to be know.. Hyper-V Top Level Functional Specification (as of v5.0b) wrongly specifies EAX:BIT(12) of CPUID:0x40000009 as the feature identification bit. The right one to check is EAX:BIT(13) of CPUID:0x40000003. I was assured that the fix in on the way. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: devel@linuxdriverproject.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Mohammed Gamal <mmorsy@redhat.com> Link: https://lkml.kernel.org/r/20180124132337.30138-4-vkuznets@redhat.com
2018-01-24 21:23:33 +08:00
static void (*hv_reenlightenment_cb)(void);
static void hv_reenlightenment_notify(struct work_struct *dummy)
{
struct hv_tsc_emulation_status emu_status;
rdmsrl(HV_X64_MSR_TSC_EMULATION_STATUS, *(u64 *)&emu_status);
/* Don't issue the callback if TSC accesses are not emulated */
if (hv_reenlightenment_cb && emu_status.inprogress)
hv_reenlightenment_cb();
}
static DECLARE_DELAYED_WORK(hv_reenlightenment_work, hv_reenlightenment_notify);
void hyperv_stop_tsc_emulation(void)
{
u64 freq;
struct hv_tsc_emulation_status emu_status;
rdmsrl(HV_X64_MSR_TSC_EMULATION_STATUS, *(u64 *)&emu_status);
emu_status.inprogress = 0;
wrmsrl(HV_X64_MSR_TSC_EMULATION_STATUS, *(u64 *)&emu_status);
rdmsrl(HV_X64_MSR_TSC_FREQUENCY, freq);
tsc_khz = div64_u64(freq, 1000);
}
EXPORT_SYMBOL_GPL(hyperv_stop_tsc_emulation);
static inline bool hv_reenlightenment_available(void)
{
/*
* Check for required features and priviliges to make TSC frequency
* change notifications work.
*/
return ms_hyperv.features & HV_ACCESS_FREQUENCY_MSRS &&
x86/hyperv: Reenlightenment notifications support Hyper-V supports Live Migration notification. This is supposed to be used in conjunction with TSC emulation: when a VM is migrated to a host with different TSC frequency for some short period the host emulates the accesses to TSC and sends an interrupt to notify about the event. When the guest is done updating everything it can disable TSC emulation and everything will start working fast again. These notifications weren't required until now as Hyper-V guests are not supposed to use TSC as a clocksource: in Linux the TSC is even marked as unstable on boot. Guests normally use 'tsc page' clocksource and host updates its values on migrations automatically. Things change when with nested virtualization: even when the PV clocksources (kvm-clock or tsc page) are passed through to the nested guests the TSC frequency and frequency changes need to be know.. Hyper-V Top Level Functional Specification (as of v5.0b) wrongly specifies EAX:BIT(12) of CPUID:0x40000009 as the feature identification bit. The right one to check is EAX:BIT(13) of CPUID:0x40000003. I was assured that the fix in on the way. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: devel@linuxdriverproject.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Mohammed Gamal <mmorsy@redhat.com> Link: https://lkml.kernel.org/r/20180124132337.30138-4-vkuznets@redhat.com
2018-01-24 21:23:33 +08:00
ms_hyperv.misc_features & HV_FEATURE_FREQUENCY_MSRS_AVAILABLE &&
ms_hyperv.features & HV_ACCESS_REENLIGHTENMENT;
x86/hyperv: Reenlightenment notifications support Hyper-V supports Live Migration notification. This is supposed to be used in conjunction with TSC emulation: when a VM is migrated to a host with different TSC frequency for some short period the host emulates the accesses to TSC and sends an interrupt to notify about the event. When the guest is done updating everything it can disable TSC emulation and everything will start working fast again. These notifications weren't required until now as Hyper-V guests are not supposed to use TSC as a clocksource: in Linux the TSC is even marked as unstable on boot. Guests normally use 'tsc page' clocksource and host updates its values on migrations automatically. Things change when with nested virtualization: even when the PV clocksources (kvm-clock or tsc page) are passed through to the nested guests the TSC frequency and frequency changes need to be know.. Hyper-V Top Level Functional Specification (as of v5.0b) wrongly specifies EAX:BIT(12) of CPUID:0x40000009 as the feature identification bit. The right one to check is EAX:BIT(13) of CPUID:0x40000003. I was assured that the fix in on the way. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: devel@linuxdriverproject.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Mohammed Gamal <mmorsy@redhat.com> Link: https://lkml.kernel.org/r/20180124132337.30138-4-vkuznets@redhat.com
2018-01-24 21:23:33 +08:00
}
DEFINE_IDTENTRY_SYSVEC(sysvec_hyperv_reenlightenment)
x86/hyperv: Reenlightenment notifications support Hyper-V supports Live Migration notification. This is supposed to be used in conjunction with TSC emulation: when a VM is migrated to a host with different TSC frequency for some short period the host emulates the accesses to TSC and sends an interrupt to notify about the event. When the guest is done updating everything it can disable TSC emulation and everything will start working fast again. These notifications weren't required until now as Hyper-V guests are not supposed to use TSC as a clocksource: in Linux the TSC is even marked as unstable on boot. Guests normally use 'tsc page' clocksource and host updates its values on migrations automatically. Things change when with nested virtualization: even when the PV clocksources (kvm-clock or tsc page) are passed through to the nested guests the TSC frequency and frequency changes need to be know.. Hyper-V Top Level Functional Specification (as of v5.0b) wrongly specifies EAX:BIT(12) of CPUID:0x40000009 as the feature identification bit. The right one to check is EAX:BIT(13) of CPUID:0x40000003. I was assured that the fix in on the way. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: devel@linuxdriverproject.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Mohammed Gamal <mmorsy@redhat.com> Link: https://lkml.kernel.org/r/20180124132337.30138-4-vkuznets@redhat.com
2018-01-24 21:23:33 +08:00
{
ack_APIC_irq();
inc_irq_stat(irq_hv_reenlightenment_count);
x86/hyperv: Reenlightenment notifications support Hyper-V supports Live Migration notification. This is supposed to be used in conjunction with TSC emulation: when a VM is migrated to a host with different TSC frequency for some short period the host emulates the accesses to TSC and sends an interrupt to notify about the event. When the guest is done updating everything it can disable TSC emulation and everything will start working fast again. These notifications weren't required until now as Hyper-V guests are not supposed to use TSC as a clocksource: in Linux the TSC is even marked as unstable on boot. Guests normally use 'tsc page' clocksource and host updates its values on migrations automatically. Things change when with nested virtualization: even when the PV clocksources (kvm-clock or tsc page) are passed through to the nested guests the TSC frequency and frequency changes need to be know.. Hyper-V Top Level Functional Specification (as of v5.0b) wrongly specifies EAX:BIT(12) of CPUID:0x40000009 as the feature identification bit. The right one to check is EAX:BIT(13) of CPUID:0x40000003. I was assured that the fix in on the way. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com> Cc: Roman Kagan <rkagan@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: devel@linuxdriverproject.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Cathy Avery <cavery@redhat.com> Cc: Mohammed Gamal <mmorsy@redhat.com> Link: https://lkml.kernel.org/r/20180124132337.30138-4-vkuznets@redhat.com
2018-01-24 21:23:33 +08:00
schedule_delayed_work(&hv_reenlightenment_work, HZ/10);
}
void set_hv_tscchange_cb(void (*cb)(void))
{
struct hv_reenlightenment_control re_ctrl = {
.vector = HYPERV_REENLIGHTENMENT_VECTOR,
.enabled = 1,
.target_vp = hv_vp_index[smp_processor_id()]
};
struct hv_tsc_emulation_control emu_ctrl = {.enabled = 1};
if (!hv_reenlightenment_available()) {
pr_warn("Hyper-V: reenlightenment support is unavailable\n");
return;
}
hv_reenlightenment_cb = cb;
/* Make sure callback is registered before we write to MSRs */
wmb();
wrmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
wrmsrl(HV_X64_MSR_TSC_EMULATION_CONTROL, *((u64 *)&emu_ctrl));
}
EXPORT_SYMBOL_GPL(set_hv_tscchange_cb);
void clear_hv_tscchange_cb(void)
{
struct hv_reenlightenment_control re_ctrl;
if (!hv_reenlightenment_available())
return;
rdmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *(u64 *)&re_ctrl);
re_ctrl.enabled = 0;
wrmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *(u64 *)&re_ctrl);
hv_reenlightenment_cb = NULL;
}
EXPORT_SYMBOL_GPL(clear_hv_tscchange_cb);
static int hv_cpu_die(unsigned int cpu)
{
struct hv_reenlightenment_control re_ctrl;
unsigned int new_cpu;
unsigned long flags;
void **input_arg;
void *input_pg = NULL;
local_irq_save(flags);
input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
input_pg = *input_arg;
*input_arg = NULL;
local_irq_restore(flags);
free_page((unsigned long)input_pg);
if (hv_vp_assist_page && hv_vp_assist_page[cpu])
wrmsrl(HV_X64_MSR_VP_ASSIST_PAGE, 0);
if (hv_reenlightenment_cb == NULL)
return 0;
rdmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
if (re_ctrl.target_vp == hv_vp_index[cpu]) {
/*
* Reassign reenlightenment notifications to some other online
* CPU or just disable the feature if there are no online CPUs
* left (happens on hibernation).
*/
new_cpu = cpumask_any_but(cpu_online_mask, cpu);
if (new_cpu < nr_cpu_ids)
re_ctrl.target_vp = hv_vp_index[new_cpu];
else
re_ctrl.enabled = 0;
wrmsrl(HV_X64_MSR_REENLIGHTENMENT_CONTROL, *((u64 *)&re_ctrl));
}
return 0;
}
static int __init hv_pci_init(void)
{
int gen2vm = efi_enabled(EFI_BOOT);
/*
* For Generation-2 VM, we exit from pci_arch_init() by returning 0.
* The purpose is to suppress the harmless warning:
* "PCI: Fatal: No config space access function found"
*/
if (gen2vm)
return 0;
/* For Generation-1 VM, we'll proceed in pci_arch_init(). */
return 1;
}
static int hv_suspend(void)
{
union hv_x64_msr_hypercall_contents hypercall_msr;
x86/hyperv: Suspend/resume the VP assist page for hibernation Unlike the other CPUs, CPU0 is never offlined during hibernation, so in the resume path, the "new" kernel's VP assist page is not suspended (i.e. not disabled), and later when we jump to the "old" kernel, the page is not properly re-enabled for CPU0 with the allocated page from the old kernel. So far, the VP assist page is used by hv_apic_eoi_write(), and is also used in the case of nested virtualization (running KVM atop Hyper-V). For hv_apic_eoi_write(), when the page is not properly re-enabled, hvp->apic_assist is always 0, so the HV_X64_MSR_EOI MSR is always written. This is not ideal with respect to performance, but Hyper-V can still correctly handle this according to the Hyper-V spec; nevertheless, Linux still must update the Hyper-V hypervisor with the correct VP assist page to prevent Hyper-V from writing to the stale page, which causes guest memory corruption and consequently may have caused the hangs and triple faults seen during non-boot CPUs resume. Fix the issue by calling hv_cpu_die()/hv_cpu_init() in the syscore ops. Without the fix, hibernation can fail at a rate of 1/300 ~ 1/500. With the fix, hibernation can pass a long-haul test of 2000 runs. In the case of nested virtualization, disabling/reenabling the assist page upon hibernation may be unsafe if there are active L2 guests. It looks KVM should be enhanced to abort the hibernation request if there is any active L2 guest. Fixes: 05bd330a7fd8 ("x86/hyperv: Suspend/resume the hypercall page for hibernation") Cc: stable@vger.kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1587437171-2472-1-git-send-email-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-21 10:46:11 +08:00
int ret;
/*
* Reset the hypercall page as it is going to be invalidated
* accross hibernation. Setting hv_hypercall_pg to NULL ensures
* that any subsequent hypercall operation fails safely instead of
* crashing due to an access of an invalid page. The hypercall page
* pointer is restored on resume.
*/
hv_hypercall_pg_saved = hv_hypercall_pg;
hv_hypercall_pg = NULL;
/* Disable the hypercall page in the hypervisor */
rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
hypercall_msr.enable = 0;
wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
x86/hyperv: Suspend/resume the VP assist page for hibernation Unlike the other CPUs, CPU0 is never offlined during hibernation, so in the resume path, the "new" kernel's VP assist page is not suspended (i.e. not disabled), and later when we jump to the "old" kernel, the page is not properly re-enabled for CPU0 with the allocated page from the old kernel. So far, the VP assist page is used by hv_apic_eoi_write(), and is also used in the case of nested virtualization (running KVM atop Hyper-V). For hv_apic_eoi_write(), when the page is not properly re-enabled, hvp->apic_assist is always 0, so the HV_X64_MSR_EOI MSR is always written. This is not ideal with respect to performance, but Hyper-V can still correctly handle this according to the Hyper-V spec; nevertheless, Linux still must update the Hyper-V hypervisor with the correct VP assist page to prevent Hyper-V from writing to the stale page, which causes guest memory corruption and consequently may have caused the hangs and triple faults seen during non-boot CPUs resume. Fix the issue by calling hv_cpu_die()/hv_cpu_init() in the syscore ops. Without the fix, hibernation can fail at a rate of 1/300 ~ 1/500. With the fix, hibernation can pass a long-haul test of 2000 runs. In the case of nested virtualization, disabling/reenabling the assist page upon hibernation may be unsafe if there are active L2 guests. It looks KVM should be enhanced to abort the hibernation request if there is any active L2 guest. Fixes: 05bd330a7fd8 ("x86/hyperv: Suspend/resume the hypercall page for hibernation") Cc: stable@vger.kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1587437171-2472-1-git-send-email-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-21 10:46:11 +08:00
ret = hv_cpu_die(0);
return ret;
}
static void hv_resume(void)
{
union hv_x64_msr_hypercall_contents hypercall_msr;
x86/hyperv: Suspend/resume the VP assist page for hibernation Unlike the other CPUs, CPU0 is never offlined during hibernation, so in the resume path, the "new" kernel's VP assist page is not suspended (i.e. not disabled), and later when we jump to the "old" kernel, the page is not properly re-enabled for CPU0 with the allocated page from the old kernel. So far, the VP assist page is used by hv_apic_eoi_write(), and is also used in the case of nested virtualization (running KVM atop Hyper-V). For hv_apic_eoi_write(), when the page is not properly re-enabled, hvp->apic_assist is always 0, so the HV_X64_MSR_EOI MSR is always written. This is not ideal with respect to performance, but Hyper-V can still correctly handle this according to the Hyper-V spec; nevertheless, Linux still must update the Hyper-V hypervisor with the correct VP assist page to prevent Hyper-V from writing to the stale page, which causes guest memory corruption and consequently may have caused the hangs and triple faults seen during non-boot CPUs resume. Fix the issue by calling hv_cpu_die()/hv_cpu_init() in the syscore ops. Without the fix, hibernation can fail at a rate of 1/300 ~ 1/500. With the fix, hibernation can pass a long-haul test of 2000 runs. In the case of nested virtualization, disabling/reenabling the assist page upon hibernation may be unsafe if there are active L2 guests. It looks KVM should be enhanced to abort the hibernation request if there is any active L2 guest. Fixes: 05bd330a7fd8 ("x86/hyperv: Suspend/resume the hypercall page for hibernation") Cc: stable@vger.kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1587437171-2472-1-git-send-email-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-21 10:46:11 +08:00
int ret;
ret = hv_cpu_init(0);
WARN_ON(ret);
/* Re-enable the hypercall page */
rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
hypercall_msr.enable = 1;
hypercall_msr.guest_physical_address =
vmalloc_to_pfn(hv_hypercall_pg_saved);
wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
hv_hypercall_pg = hv_hypercall_pg_saved;
hv_hypercall_pg_saved = NULL;
/*
* Reenlightenment notifications are disabled by hv_cpu_die(0),
* reenable them here if hv_reenlightenment_cb was previously set.
*/
if (hv_reenlightenment_cb)
set_hv_tscchange_cb(hv_reenlightenment_cb);
}
x86/hyperv: Suspend/resume the VP assist page for hibernation Unlike the other CPUs, CPU0 is never offlined during hibernation, so in the resume path, the "new" kernel's VP assist page is not suspended (i.e. not disabled), and later when we jump to the "old" kernel, the page is not properly re-enabled for CPU0 with the allocated page from the old kernel. So far, the VP assist page is used by hv_apic_eoi_write(), and is also used in the case of nested virtualization (running KVM atop Hyper-V). For hv_apic_eoi_write(), when the page is not properly re-enabled, hvp->apic_assist is always 0, so the HV_X64_MSR_EOI MSR is always written. This is not ideal with respect to performance, but Hyper-V can still correctly handle this according to the Hyper-V spec; nevertheless, Linux still must update the Hyper-V hypervisor with the correct VP assist page to prevent Hyper-V from writing to the stale page, which causes guest memory corruption and consequently may have caused the hangs and triple faults seen during non-boot CPUs resume. Fix the issue by calling hv_cpu_die()/hv_cpu_init() in the syscore ops. Without the fix, hibernation can fail at a rate of 1/300 ~ 1/500. With the fix, hibernation can pass a long-haul test of 2000 runs. In the case of nested virtualization, disabling/reenabling the assist page upon hibernation may be unsafe if there are active L2 guests. It looks KVM should be enhanced to abort the hibernation request if there is any active L2 guest. Fixes: 05bd330a7fd8 ("x86/hyperv: Suspend/resume the hypercall page for hibernation") Cc: stable@vger.kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1587437171-2472-1-git-send-email-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-21 10:46:11 +08:00
/* Note: when the ops are called, only CPU0 is online and IRQs are disabled. */
static struct syscore_ops hv_syscore_ops = {
.suspend = hv_suspend,
.resume = hv_resume,
};
/*
* This function is to be invoked early in the boot sequence after the
* hypervisor has been detected.
*
* 1. Setup the hypercall page.
* 2. Register Hyper-V specific clocksource.
* 3. Setup Hyper-V specific APIC entry points.
*/
void __init hyperv_init(void)
{
u64 guest_id, required_msrs;
union hv_x64_msr_hypercall_contents hypercall_msr;
int cpuhp, i;
if (x86_hyper_type != X86_HYPER_MS_HYPERV)
return;
/* Absolutely required MSRs */
required_msrs = HV_MSR_HYPERCALL_AVAILABLE |
HV_MSR_VP_INDEX_AVAILABLE;
if ((ms_hyperv.features & required_msrs) != required_msrs)
return;
/*
* Allocate the per-CPU state for the hypercall input arg.
* If this allocation fails, we will not be able to setup
* (per-CPU) hypercall input page and thus this failure is
* fatal on Hyper-V.
*/
hyperv_pcpu_input_arg = alloc_percpu(void *);
BUG_ON(hyperv_pcpu_input_arg == NULL);
/* Allocate percpu VP index */
hv_vp_index = kmalloc_array(num_possible_cpus(), sizeof(*hv_vp_index),
GFP_KERNEL);
if (!hv_vp_index)
return;
for (i = 0; i < num_possible_cpus(); i++)
hv_vp_index[i] = VP_INVAL;
hv_vp_assist_page = kcalloc(num_possible_cpus(),
sizeof(*hv_vp_assist_page), GFP_KERNEL);
if (!hv_vp_assist_page) {
ms_hyperv.hints &= ~HV_X64_ENLIGHTENED_VMCS_RECOMMENDED;
goto free_vp_index;
}
cpuhp = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/hyperv_init:online",
hv_cpu_init, hv_cpu_die);
if (cpuhp < 0)
goto free_vp_assist_page;
/*
* Setup the hypercall page and enable hypercalls.
* 1. Register the guest ID
* 2. Enable the hypercall and register the hypercall page
*/
guest_id = generate_guest_id(0, LINUX_VERSION_CODE, 0);
wrmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id);
x86/hyperv: allocate the hypercall page with only read and execute bits Patch series "fix a hyperv W^X violation and remove vmalloc_exec" Dexuan reported a W^X violation due to the fact that the hyper hypercall page due switching it to be allocated using vmalloc_exec. The problem is that PAGE_KERNEL_EXEC as used by vmalloc_exec actually sets writable permissions in the pte. This series fixes the issue by switching to the low-level __vmalloc_node_range interface that allows specifing more detailed permissions instead. It then also open codes the other two callers and removes the somewhat confusing vmalloc_exec interface. Peter noted that the hyper hypercall page allocation also has another long standing issue in that it shouldn't use the full vmalloc but just the module space. This issue is so far theoretical as the allocation is done early in the boot process. I plan to fix it with another bigger series for 5.9. This patch (of 3): Avoid a W^X violation cause by the fact that PAGE_KERNEL_EXEC includes the writable bit. For this resurrect the removed PAGE_KERNEL_RX definition, but as PAGE_KERNEL_ROX to match arm64 and powerpc. Link: http://lkml.kernel.org/r/20200618064307.32739-2-hch@lst.de Fixes: 78bb17f76edc ("x86/hyperv: use vmalloc_exec for the hypercall page") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Dexuan Cui <decui@microsoft.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-26 11:30:40 +08:00
hv_hypercall_pg = __vmalloc_node_range(PAGE_SIZE, 1, VMALLOC_START,
VMALLOC_END, GFP_KERNEL, PAGE_KERNEL_ROX,
VM_FLUSH_RESET_PERMS, NUMA_NO_NODE,
__builtin_return_address(0));
if (hv_hypercall_pg == NULL) {
wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
goto remove_cpuhp_state;
}
rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
hypercall_msr.enable = 1;
hypercall_msr.guest_physical_address = vmalloc_to_pfn(hv_hypercall_pg);
wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
x86/hyperv: Initialize clockevents earlier in CPU onlining Hyper-V has historically initialized stimer-based clockevents late in the process of onlining a CPU because clockevents depend on stimer interrupts. In the original Hyper-V design, stimer interrupts generate a VMbus message, so the VMbus machinery must be running first, and VMbus can't be initialized until relatively late. On x86/64, LAPIC timer based clockevents are used during early initialization before VMbus and stimer-based clockevents are ready, and again during CPU offlining after the stimer clockevents have been shut down. Unfortunately, this design creates problems when offlining CPUs for hibernation or other purposes. stimer-based clockevents are shut down relatively early in the offlining process, so clockevents_unbind_device() must be used to fallback to the LAPIC-based clockevents for the remainder of the offlining process. Furthermore, the late initialization and early shutdown of stimer-based clockevents doesn't work well on ARM64 since there is no other timer like the LAPIC to fallback to. So CPU onlining and offlining doesn't work properly. Fix this by recognizing that stimer Direct Mode is the normal path for newer versions of Hyper-V on x86/64, and the only path on other architectures. With stimer Direct Mode, stimer interrupts don't require any VMbus machinery. stimer clockevents can be initialized and shut down consistent with how it is done for other clockevent devices. While the old VMbus-based stimer interrupts must still be supported for backward compatibility on x86, that mode of operation can be treated as legacy. So add a new Hyper-V stimer entry in the CPU hotplug state list, and use that new state when in Direct Mode. Update the Hyper-V clocksource driver to allocate and initialize stimer clockevents earlier during boot. Update Hyper-V initialization and the VMbus driver to use this new design. As a result, the LAPIC timer is no longer used during boot or CPU onlining/offlining and clockevents_unbind_device() is not called. But retain the old design as a legacy implementation for older versions of Hyper-V that don't support Direct Mode. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lkml.kernel.org/r/1573607467-9456-1-git-send-email-mikelley@microsoft.com
2019-11-13 09:11:49 +08:00
/*
* Ignore any errors in setting up stimer clockevents
* as we can run with the LAPIC timer as a fallback.
*/
(void)hv_stimer_alloc();
hv_apic_init();
x86_init.pci.arch_init = hv_pci_init;
register_syscore_ops(&hv_syscore_ops);
return;
remove_cpuhp_state:
cpuhp_remove_state(cpuhp);
free_vp_assist_page:
kfree(hv_vp_assist_page);
hv_vp_assist_page = NULL;
free_vp_index:
kfree(hv_vp_index);
hv_vp_index = NULL;
}
/*
* This routine is called before kexec/kdump, it does the required cleanup.
*/
void hyperv_cleanup(void)
{
union hv_x64_msr_hypercall_contents hypercall_msr;
unregister_syscore_ops(&hv_syscore_ops);
/* Reset our OS id */
wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
x86/hyperv: Fix kernel panic when kexec on HyperV After commit 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments"), kexec fails with a kernel panic: kexec_core: Starting new kernel BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v3.0 03/02/2018 RIP: 0010:0xffffc9000001d000 Call Trace: ? __send_ipi_mask+0x1c6/0x2d0 ? hv_send_ipi_mask_allbutself+0x6d/0xb0 ? mp_save_irq+0x70/0x70 ? __ioapic_read_entry+0x32/0x50 ? ioapic_read_entry+0x39/0x50 ? clear_IO_APIC_pin+0xb8/0x110 ? native_stop_other_cpus+0x6e/0x170 ? native_machine_shutdown+0x22/0x40 ? kernel_kexec+0x136/0x156 That happens if hypercall based IPIs are used because the hypercall page is reset very early upon kexec reboot, but kexec sends IPIs to stop CPUs, which invokes the hypercall and dereferences the unusable page. To fix his, reset hv_hypercall_pg to NULL before the page is reset to avoid any misuse, IPI sending will fall back to the non hypercall based method. This only happens on kexec / kdump so just setting the pointer to NULL is good enough. Fixes: 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments") Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: devel@linuxdriverproject.org Link: https://lkml.kernel.org/r/20190306111827.14131-1-kasong@redhat.com
2019-03-06 19:18:27 +08:00
/*
* Reset hypercall page reference before reset the page,
* let hypercall operations fail safely rather than
* panic the kernel for using invalid hypercall page
*/
hv_hypercall_pg = NULL;
/* Reset the hypercall page */
hypercall_msr.as_uint64 = 0;
wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
/* Reset the TSC page */
hypercall_msr.as_uint64 = 0;
wrmsrl(HV_X64_MSR_REFERENCE_TSC, hypercall_msr.as_uint64);
}
EXPORT_SYMBOL_GPL(hyperv_cleanup);
void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die)
{
static bool panic_reported;
u64 guest_id;
if (in_die && !panic_on_oops)
return;
/*
* We prefer to report panic on 'die' chain as we have proper
* registers to report, but if we miss it (e.g. on BUG()) we need
* to report it on 'panic'.
*/
if (panic_reported)
return;
panic_reported = true;
rdmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id);
wrmsrl(HV_X64_MSR_CRASH_P0, err);
wrmsrl(HV_X64_MSR_CRASH_P1, guest_id);
wrmsrl(HV_X64_MSR_CRASH_P2, regs->ip);
wrmsrl(HV_X64_MSR_CRASH_P3, regs->ax);
wrmsrl(HV_X64_MSR_CRASH_P4, regs->sp);
/*
* Let Hyper-V know there is crash data available
*/
wrmsrl(HV_X64_MSR_CRASH_CTL, HV_CRASH_CTL_CRASH_NOTIFY);
}
EXPORT_SYMBOL_GPL(hyperv_report_panic);
/**
* hyperv_report_panic_msg - report panic message to Hyper-V
* @pa: physical address of the panic page containing the message
* @size: size of the message in the page
*/
void hyperv_report_panic_msg(phys_addr_t pa, size_t size)
{
/*
* P3 to contain the physical address of the panic page & P4 to
* contain the size of the panic data in that page. Rest of the
* registers are no-op when the NOTIFY_MSG flag is set.
*/
wrmsrl(HV_X64_MSR_CRASH_P0, 0);
wrmsrl(HV_X64_MSR_CRASH_P1, 0);
wrmsrl(HV_X64_MSR_CRASH_P2, 0);
wrmsrl(HV_X64_MSR_CRASH_P3, pa);
wrmsrl(HV_X64_MSR_CRASH_P4, size);
/*
* Let Hyper-V know there is crash data available along with
* the panic message.
*/
wrmsrl(HV_X64_MSR_CRASH_CTL,
(HV_CRASH_CTL_CRASH_NOTIFY | HV_CRASH_CTL_CRASH_NOTIFY_MSG));
}
EXPORT_SYMBOL_GPL(hyperv_report_panic_msg);
bool hv_is_hyperv_initialized(void)
{
union hv_x64_msr_hypercall_contents hypercall_msr;
/*
* Ensure that we're really on Hyper-V, and not a KVM or Xen
* emulation of Hyper-V
*/
if (x86_hyper_type != X86_HYPER_MS_HYPERV)
return false;
/*
* Verify that earlier initialization succeeded by checking
* that the hypercall page is setup
*/
hypercall_msr.as_uint64 = 0;
rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
return hypercall_msr.enable;
}
EXPORT_SYMBOL_GPL(hv_is_hyperv_initialized);
x86/hyperv: Implement hv_is_hibernation_supported() The API will be used by the hv_balloon and hv_vmbus drivers. Balloon up/down and hot-add of memory must not be active if the user wants the Linux VM to support hibernation, because they are incompatible with hibernation according to Hyper-V team, e.g. upon suspend the balloon VSP doesn't save any info about the ballooned-out pages (if any); so, after Linux resumes, Linux balloon VSC expects that the VSP will return the pages if Linux is under memory pressure, but the VSP will never do that, since the VSP thinks it never stole the pages from the VM. So, if the user wants Linux VM to support hibernation, Linux must forbid balloon up/down and hot-add, and the only functionality of the balloon VSC driver is reporting the VM's memory pressure to the host. Ideally, when Linux detects that the user wants it to support hibernation, the balloon VSC should tell the VSP that it does not support ballooning and hot-add. However, the current version of the VSP requires the VSC should support these capabilities, otherwise the capability negotiation fails and the VSC can not load at all, so with the later changes to the VSC driver, Linux VM still reports to the VSP that the VSC supports these capabilities, but the VSC ignores the VSP's requests of balloon up/down and hot add, and reports an error to the VSP, when applicable. BTW, in the future the balloon VSP driver will allow the VSC to not support the capabilities of balloon up/down and hot add. The ACPI S4 state is not a must for hibernation to work, because Linux is able to hibernate as long as the system can shut down. However in practice we decide to artificially use the presence of the virtual ACPI S4 state as an indicator of the user's intent of using hibernation, because Linux VM must find a way to know if the user wants to use the hibernation feature or not. By default, Hyper-V does not enable the virtual ACPI S4 state; on recent Hyper-V hosts (e.g. RS5, 19H1), the administrator is able to enable the state for a VM by WMI commands. Once all the vmbus and VSC patches for the hibernation feature are accepted, an extra patch will be submitted to forbid hibernation if the virtual ACPI S4 state is absent, i.e. hv_is_hibernation_supported() is false. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20 15:16:04 +08:00
bool hv_is_hibernation_supported(void)
{
return acpi_sleep_state_supported(ACPI_STATE_S4);
}
EXPORT_SYMBOL_GPL(hv_is_hibernation_supported);