linux/drivers/dma/Kconfig

266 lines
7.1 KiB
Plaintext
Raw Normal View History

#
# DMA engine configuration
#
menuconfig DMADEVICES
bool "DMA Engine support"
depends on HAS_DMA
help
DMA engines can do asynchronous data transfers without
involving the host CPU. Currently, this framework can be
used to offload memory copies in the network stack and
RAID operations in the MD driver. This menu only presents
DMA Device drivers supported by the configured arch, it may
be empty in some cases.
config DMADEVICES_DEBUG
bool "DMA Engine debugging"
depends on DMADEVICES != n
help
This is an option for use by developers; most people should
say N here. This enables DMA engine core and driver debugging.
config DMADEVICES_VDEBUG
bool "DMA Engine verbose debugging"
depends on DMADEVICES_DEBUG != n
help
This is an option for use by developers; most people should
say N here. This enables deeper (more verbose) debugging of
the DMA engine core and drivers.
if DMADEVICES
comment "DMA Devices"
config INTEL_MID_DMAC
tristate "Intel MID DMA support for Peripheral DMA controllers"
depends on PCI && X86
select DMA_ENGINE
default n
help
Enable support for the Intel(R) MID DMA engine present
in Intel MID chipsets.
Say Y here if you have such a chipset.
If unsure, say N.
config ASYNC_TX_ENABLE_CHANNEL_SWITCH
bool
config AMBA_PL08X
bool "ARM PrimeCell PL080 or PL081 support"
depends on ARM_AMBA && EXPERIMENTAL
select DMA_ENGINE
help
Platform has a PL08x DMAC device
which can provide DMA engine support
config INTEL_IOATDMA
tristate "Intel I/OAT DMA support"
depends on PCI && X86
select DMA_ENGINE
select DCA
select ASYNC_TX_DISABLE_PQ_VAL_DMA
select ASYNC_TX_DISABLE_XOR_VAL_DMA
help
Enable support for the Intel(R) I/OAT DMA engine present
in recent Intel Xeon chipsets.
Say Y here if you have such a chipset.
If unsure, say N.
config INTEL_IOP_ADMA
tristate "Intel IOP ADMA support"
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
select DMA_ENGINE
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
help
Enable support for the Intel(R) IOP Series RAID engines.
dmaengine: Driver for the Synopsys DesignWare DMA controller This adds a driver for the Synopsys DesignWare DMA controller (aka DMACA on AVR32 systems.) This DMA controller can be found integrated on the AT32AP7000 chip and is primarily meant for peripheral DMA transfer, but can also be used for memory-to-memory transfers. This patch is based on a driver from David Brownell which was based on an older version of the DMA Engine framework. It also implements the proposed extensions to the DMA Engine API for slave DMA operations. The dmatest client shows no problems, but there may still be room for improvement performance-wise. DMA slave transfer performance is definitely "good enough"; reading 100 MiB from an SD card running at ~20 MHz yields ~7.2 MiB/s average transfer rate. Full documentation for this controller can be found in the Synopsys DW AHB DMAC Databook: http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf The controller has lots of implementation options, so it's usually a good idea to check the data sheet of the chip it's intergrated on as well. The AT32AP7000 data sheet can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since v4: * Use client_count instead of dma_chan_is_in_use() * Add missing include * Unmap buffers unless client told us not to Changes since v3: * Update to latest DMA engine and DMA slave APIs * Embed the hw descriptor into the sw descriptor * Clean up and update MODULE_DESCRIPTION, copyright date, etc. Changes since v2: * Dequeue all pending transfers in terminate_all() * Rename dw_dmac.h -> dw_dmac_regs.h * Define and use controller-specific dma_slave data * Fix up a few outdated comments * Define hardware registers as structs (doesn't generate better code, unfortunately, but it looks nicer.) * Get number of channels from platform_data instead of hardcoding it based on CONFIG_WHATEVER_CPU. * Give slave clients exclusive access to the channel Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>, Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 02:59:42 +08:00
config DW_DMAC
tristate "Synopsys DesignWare AHB DMA support"
depends on AVR32
select DMA_ENGINE
default y if CPU_AT32AP7000
help
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.
config AT_HDMAC
tristate "Atmel AHB DMA support"
depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
select DMA_ENGINE
help
Support the Atmel AHB DMA controller. This can be integrated in
chips such as the Atmel AT91SAM9RL.
config FSL_DMA
tristate "Freescale Elo and Elo Plus DMA support"
depends on FSL_SOC
select DMA_ENGINE
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
---help---
Enable support for the Freescale Elo and Elo Plus DMA controllers.
The Elo is the DMA controller on some 82xx and 83xx parts, and the
Elo Plus is the DMA controller on 85xx and 86xx parts.
config MPC512X_DMA
tristate "Freescale MPC512x built-in DMA engine support"
depends on PPC_MPC512x || PPC_MPC831x
select DMA_ENGINE
---help---
Enable support for the Freescale MPC512x built-in DMA engine.
config MV_XOR
bool "Marvell XOR engine support"
depends on PLAT_ORION
select DMA_ENGINE
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
---help---
Enable support for the Marvell XOR engine.
config MX3_IPU
bool "MX3x Image Processing Unit support"
depends on ARCH_MX3
select DMA_ENGINE
default y
help
If you plan to use the Image Processing unit in the i.MX3x, say
Y here. If unsure, select Y.
config MX3_IPU_IRQS
int "Number of dynamically mapped interrupts for IPU"
depends on MX3_IPU
range 2 137
default 4
help
Out of 137 interrupt sources on i.MX31 IPU only very few are used.
To avoid bloating the irq_desc[] array we allocate a sufficient
number of IRQ slots and map them dynamically to specific sources.
config TXX9_DMAC
tristate "Toshiba TXx9 SoC DMA support"
depends on MACH_TX49XX || MACH_TX39XX
select DMA_ENGINE
help
Support the TXx9 SoC internal DMA controller. This can be
integrated in chips such as the Toshiba TX4927/38/39.
config SH_DMAE
tristate "Renesas SuperH DMAC support"
depends on (SUPERH && SH_DMA) || (ARM && ARCH_SHMOBILE)
depends on !SH_DMA_API
select DMA_ENGINE
help
Enable support for the Renesas SuperH DMA controllers.
config COH901318
bool "ST-Ericsson COH901318 DMA support"
select DMA_ENGINE
depends on ARCH_U300
help
Enable support for ST-Ericsson COH 901 318 DMA.
config STE_DMA40
bool "ST-Ericsson DMA40 support"
depends on ARCH_U8500
select DMA_ENGINE
help
Support for ST-Ericsson DMA40 controller
config AMCC_PPC440SPE_ADMA
tristate "AMCC PPC440SPe ADMA support"
depends on 440SPe || 440SP
select DMA_ENGINE
select ARCH_HAS_ASYNC_TX_FIND_CHANNEL
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
help
Enable support for the AMCC PPC440SPe RAID engines.
config TIMB_DMA
tristate "Timberdale FPGA DMA support"
depends on MFD_TIMBERDALE || HAS_IOMEM
select DMA_ENGINE
help
Enable support for the Timberdale FPGA DMA engine.
config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
bool
config PL330_DMA
tristate "DMA API Driver for PL330"
select DMA_ENGINE
depends on PL330
help
Select if your platform has one or more PL330 DMACs.
You need to provide platform specific settings via
platform_data for a dma-pl330 device.
config PCH_DMA
tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH DMA support"
depends on PCI && X86
select DMA_ENGINE
help
Enable support for Intel EG20T PCH DMA engine.
This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
Output Hub) which is for IVI(In-Vehicle Infotainment) use.
ML7213 is companion chip for Intel Atom E6xx series.
ML7213 is completely compatible for Intel EG20T PCH.
config IMX_SDMA
tristate "i.MX SDMA support"
depends on ARCH_MX25 || ARCH_MX3 || ARCH_MX5
select DMA_ENGINE
help
Support the i.MX SDMA engine. This engine is integrated into
Freescale i.MX25/31/35/51 chips.
config IMX_DMA
tristate "i.MX DMA support"
depends on ARCH_MX1 || ARCH_MX21 || MACH_MX27
select DMA_ENGINE
help
Support the i.MX DMA engine. This engine is integrated into
Freescale i.MX1/21/27 chips.
config DMA_ENGINE
bool
comment "DMA Clients"
depends on DMA_ENGINE
config NET_DMA
bool "Network: TCP receive copy offload"
depends on DMA_ENGINE && NET
default (INTEL_IOATDMA || FSL_DMA)
help
This enables the use of DMA engines in the network stack to
offload receive copy-to-user operations, freeing CPU cycles.
Say Y here if you enabled INTEL_IOATDMA or FSL_DMA, otherwise
say N.
config ASYNC_TX_DMA
bool "Async_tx: Offload support for the async_tx api"
depends on DMA_ENGINE
help
This allows the async_tx api to take advantage of offload engines for
memcpy, memset, xor, and raid6 p+q operations. If your platform has
a dma engine that can perform raid operations and you have enabled
MD_RAID456 say Y.
If unsure, say N.
config DMATEST
tristate "DMA Test client"
depends on DMA_ENGINE
help
Simple DMA test client. Say N unless you're debugging a
DMA Device driver.
endif