mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-12 21:44:06 +08:00
99 lines
1.9 KiB
ReStructuredText
99 lines
1.9 KiB
ReStructuredText
|
.. SPDX-License-Identifier: GPL-2.0
|
||
|
|
||
|
Kernel driver mp2856
|
||
|
====================
|
||
|
|
||
|
Supported chips:
|
||
|
|
||
|
* MPS MP2856
|
||
|
|
||
|
Prefix: 'mp2856'
|
||
|
|
||
|
* MPS MP2857
|
||
|
|
||
|
Prefix: 'mp2857'
|
||
|
|
||
|
Author:
|
||
|
|
||
|
Peter Yin <peter.yin@quantatw.com>
|
||
|
|
||
|
Description
|
||
|
-----------
|
||
|
|
||
|
This driver implements support for Monolithic Power Systems, Inc. (MPS)
|
||
|
vendor dual-loop, digital, multi-phase controller MP2856/MP2857
|
||
|
|
||
|
This device:
|
||
|
|
||
|
- Supports up to two power rail.
|
||
|
- Supports two pages 0 and 1 for and also pages 2 for configuration.
|
||
|
- Can configured VOUT readout in direct or VID format and allows
|
||
|
setting of different formats on rails 1 and 2. For VID the following
|
||
|
protocols are available: AMD SVI3 mode with 5-mV/LSB.
|
||
|
|
||
|
Device supports:
|
||
|
|
||
|
- SVID interface.
|
||
|
- AVSBus interface.
|
||
|
|
||
|
Device compliant with:
|
||
|
|
||
|
- PMBus rev 1.3 interface.
|
||
|
|
||
|
Device supports direct format for reading output current, output voltage,
|
||
|
input and output power and temperature.
|
||
|
Device supports linear format for reading input voltage and input power.
|
||
|
Device supports VID and direct formats for reading output voltage.
|
||
|
The below VID modes are supported: AMD SVI3.
|
||
|
|
||
|
The driver provides the following sysfs attributes for current measurements:
|
||
|
|
||
|
- indexes 1 for "iin";
|
||
|
- indexes 2, 3 for "iout";
|
||
|
|
||
|
**curr[1-3]_alarm**
|
||
|
|
||
|
**curr[1-3]_input**
|
||
|
|
||
|
**curr[1-3]_label**
|
||
|
|
||
|
The driver provides the following sysfs attributes for voltage measurements.
|
||
|
|
||
|
- indexes 1 for "vin";
|
||
|
- indexes 2, 3 for "vout";
|
||
|
|
||
|
**in[1-3]_crit**
|
||
|
|
||
|
**in[1-3]_crit_alarm**
|
||
|
|
||
|
**in[1-3]_input**
|
||
|
|
||
|
**in[1-3]_label**
|
||
|
|
||
|
**in[1-3]_lcrit**
|
||
|
|
||
|
**in[1-3]_lcrit_alarm**
|
||
|
|
||
|
The driver provides the following sysfs attributes for power measurements.
|
||
|
|
||
|
- indexes 1 for "pin";
|
||
|
- indexes 2, 3 for "pout";
|
||
|
|
||
|
**power[1-3]_alarm**
|
||
|
|
||
|
**power[1-3]_input**
|
||
|
|
||
|
**power[1-3]_label**
|
||
|
|
||
|
The driver provides the following sysfs attributes for temperature measurements.
|
||
|
|
||
|
**temp[1-2]_crit**
|
||
|
|
||
|
**temp[1-2]_crit_alarm**
|
||
|
|
||
|
**temp[1-2]_input**
|
||
|
|
||
|
**temp[1-2]_max**
|
||
|
|
||
|
**temp[1-2]_max_alarm**
|