linux/lib/kunit/executor.c

295 lines
8.0 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
#include <linux/reboot.h>
#include <kunit/test.h>
#include <kunit/attributes.h>
#include <linux/glob.h>
#include <linux/moduleparam.h>
/*
* These symbols point to the .kunit_test_suites section and are defined in
* include/asm-generic/vmlinux.lds.h, and consequently must be extern.
*/
extern struct kunit_suite * const __kunit_suites_start[];
extern struct kunit_suite * const __kunit_suites_end[];
#if IS_BUILTIN(CONFIG_KUNIT)
static char *filter_glob_param;
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
static char *action_param;
static char *filter_param;
static char *filter_action_param;
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
module_param_named(filter_glob, filter_glob_param, charp, 0);
MODULE_PARM_DESC(filter_glob,
"Filter which KUnit test suites/tests run at boot-time, e.g. list* or list*.*del_test");
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
module_param_named(action, action_param, charp, 0);
MODULE_PARM_DESC(action,
"Changes KUnit executor behavior, valid values are:\n"
"<none>: run the tests like normal\n"
"'list' to list test names instead of running them.\n"
"'list_attr' to list test names and attributes instead of running them.\n");
module_param_named(filter, filter_param, charp, 0);
MODULE_PARM_DESC(filter,
"Filter which KUnit test suites/tests run at boot-time using attributes, e.g. speed>slow");
module_param_named(filter_action, filter_action_param, charp, 0);
MODULE_PARM_DESC(filter_action,
"Changes behavior of filtered tests using attributes, valid values are:\n"
"<none>: do not run filtered tests as normal\n"
"'skip': skip all filtered tests instead so tests will appear in output\n");
/* glob_match() needs NULL terminated strings, so we need a copy of filter_glob_param. */
struct kunit_glob_filter {
char *suite_glob;
char *test_glob;
};
/* Split "suite_glob.test_glob" into two. Assumes filter_glob is not empty. */
static void kunit_parse_glob_filter(struct kunit_glob_filter *parsed,
const char *filter_glob)
{
const int len = strlen(filter_glob);
const char *period = strchr(filter_glob, '.');
if (!period) {
parsed->suite_glob = kzalloc(len + 1, GFP_KERNEL);
parsed->test_glob = NULL;
strcpy(parsed->suite_glob, filter_glob);
return;
}
parsed->suite_glob = kzalloc(period - filter_glob + 1, GFP_KERNEL);
parsed->test_glob = kzalloc(len - (period - filter_glob) + 1, GFP_KERNEL);
strncpy(parsed->suite_glob, filter_glob, period - filter_glob);
strncpy(parsed->test_glob, period + 1, len - (period - filter_glob));
}
/* Create a copy of suite with only tests that match test_glob. */
static struct kunit_suite *
kunit_filter_glob_tests(const struct kunit_suite *const suite, const char *test_glob)
{
int n = 0;
struct kunit_case *filtered, *test_case;
struct kunit_suite *copy;
kunit_suite_for_each_test_case(suite, test_case) {
if (!test_glob || glob_match(test_glob, test_case->name))
++n;
}
if (n == 0)
return NULL;
copy = kmemdup(suite, sizeof(*copy), GFP_KERNEL);
if (!copy)
return ERR_PTR(-ENOMEM);
filtered = kcalloc(n + 1, sizeof(*filtered), GFP_KERNEL);
if (!filtered) {
kfree(copy);
return ERR_PTR(-ENOMEM);
}
n = 0;
kunit_suite_for_each_test_case(suite, test_case) {
if (!test_glob || glob_match(test_glob, test_case->name))
filtered[n++] = *test_case;
}
copy->test_cases = filtered;
return copy;
}
static char *kunit_shutdown;
core_param(kunit_shutdown, kunit_shutdown, charp, 0644);
/* Stores an array of suites, end points one past the end */
struct suite_set {
struct kunit_suite * const *start;
struct kunit_suite * const *end;
};
static void kunit_free_suite_set(struct suite_set suite_set)
{
struct kunit_suite * const *suites;
for (suites = suite_set.start; suites < suite_set.end; suites++)
kfree(*suites);
kfree(suite_set.start);
}
static struct suite_set kunit_filter_suites(const struct suite_set *suite_set,
const char *filter_glob,
char *filters,
char *filter_action,
int *err)
{
int i, j, k, filter_count;
struct kunit_suite **copy, *filtered_suite, *new_filtered_suite;
struct suite_set filtered;
struct kunit_glob_filter parsed_glob;
struct kunit_attr_filter *parsed_filters;
const size_t max = suite_set->end - suite_set->start;
copy = kmalloc_array(max, sizeof(*filtered.start), GFP_KERNEL);
filtered.start = copy;
if (!copy) { /* won't be able to run anything, return an empty set */
filtered.end = copy;
return filtered;
}
if (filter_glob)
kunit_parse_glob_filter(&parsed_glob, filter_glob);
/* Parse attribute filters */
if (filters) {
filter_count = kunit_get_filter_count(filters);
parsed_filters = kcalloc(filter_count + 1, sizeof(*parsed_filters), GFP_KERNEL);
for (j = 0; j < filter_count; j++)
parsed_filters[j] = kunit_next_attr_filter(&filters, err);
if (*err)
return filtered;
}
for (i = 0; &suite_set->start[i] != suite_set->end; i++) {
filtered_suite = suite_set->start[i];
if (filter_glob) {
if (!glob_match(parsed_glob.suite_glob, filtered_suite->name))
continue;
filtered_suite = kunit_filter_glob_tests(filtered_suite,
parsed_glob.test_glob);
if (IS_ERR(filtered_suite)) {
*err = PTR_ERR(filtered_suite);
return filtered;
}
}
if (filter_count) {
for (k = 0; k < filter_count; k++) {
new_filtered_suite = kunit_filter_attr_tests(filtered_suite,
parsed_filters[k], filter_action, err);
/* Free previous copy of suite */
if (k > 0 || filter_glob)
kfree(filtered_suite);
filtered_suite = new_filtered_suite;
if (*err)
return filtered;
if (IS_ERR(filtered_suite)) {
*err = PTR_ERR(filtered_suite);
return filtered;
}
if (!filtered_suite)
break;
}
}
if (!filtered_suite)
continue;
*copy++ = filtered_suite;
}
filtered.end = copy;
if (filter_glob) {
kfree(parsed_glob.suite_glob);
kfree(parsed_glob.test_glob);
}
if (filter_count)
kfree(parsed_filters);
return filtered;
}
static void kunit_handle_shutdown(void)
{
if (!kunit_shutdown)
return;
if (!strcmp(kunit_shutdown, "poweroff"))
kernel_power_off();
else if (!strcmp(kunit_shutdown, "halt"))
kernel_halt();
else if (!strcmp(kunit_shutdown, "reboot"))
kernel_restart(NULL);
}
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
static void kunit_exec_run_tests(struct suite_set *suite_set)
{
size_t num_suites = suite_set->end - suite_set->start;
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
kunit: improve KTAP compliance of KUnit test output Change KUnit test output to better comply with KTAP v1 specifications found here: https://kernel.org/doc/html/latest/dev-tools/ktap.html. 1) Use "KTAP version 1" instead of "TAP version 14" as test output header 2) Remove '-' between test number and test name on test result lines 2) Add KTAP version lines to each subtest header as well Note that the new KUnit output still includes the “# Subtest” line now located after the KTAP version line. This does not completely match the KTAP v1 spec but since it is classified as a diagnostic line, it is not expected to be disruptive or break any existing parsers. This “# Subtest” line comes from the TAP 14 spec (https://testanything.org/tap-version-14-specification.html) and it is used to define the test name before the results. Original output: TAP version 14 1..1 # Subtest: kunit-test-suite 1..3 ok 1 - kunit_test_1 ok 2 - kunit_test_2 ok 3 - kunit_test_3 # kunit-test-suite: pass:3 fail:0 skip:0 total:3 # Totals: pass:3 fail:0 skip:0 total:3 ok 1 - kunit-test-suite New output: KTAP version 1 1..1 KTAP version 1 # Subtest: kunit-test-suite 1..3 ok 1 kunit_test_1 ok 2 kunit_test_2 ok 3 kunit_test_3 # kunit-test-suite: pass:3 fail:0 skip:0 total:3 # Totals: pass:3 fail:0 skip:0 total:3 ok 1 kunit-test-suite Signed-off-by: Rae Moar <rmoar@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-11-24 02:25:58 +08:00
pr_info("KTAP version 1\n");
pr_info("1..%zu\n", num_suites);
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
__kunit_test_suites_init(suite_set->start, num_suites);
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
}
static void kunit_exec_list_tests(struct suite_set *suite_set, bool include_attr)
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
{
struct kunit_suite * const *suites;
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
struct kunit_case *test_case;
kunit: improve KTAP compliance of KUnit test output Change KUnit test output to better comply with KTAP v1 specifications found here: https://kernel.org/doc/html/latest/dev-tools/ktap.html. 1) Use "KTAP version 1" instead of "TAP version 14" as test output header 2) Remove '-' between test number and test name on test result lines 2) Add KTAP version lines to each subtest header as well Note that the new KUnit output still includes the “# Subtest” line now located after the KTAP version line. This does not completely match the KTAP v1 spec but since it is classified as a diagnostic line, it is not expected to be disruptive or break any existing parsers. This “# Subtest” line comes from the TAP 14 spec (https://testanything.org/tap-version-14-specification.html) and it is used to define the test name before the results. Original output: TAP version 14 1..1 # Subtest: kunit-test-suite 1..3 ok 1 - kunit_test_1 ok 2 - kunit_test_2 ok 3 - kunit_test_3 # kunit-test-suite: pass:3 fail:0 skip:0 total:3 # Totals: pass:3 fail:0 skip:0 total:3 ok 1 - kunit-test-suite New output: KTAP version 1 1..1 KTAP version 1 # Subtest: kunit-test-suite 1..3 ok 1 kunit_test_1 ok 2 kunit_test_2 ok 3 kunit_test_3 # kunit-test-suite: pass:3 fail:0 skip:0 total:3 # Totals: pass:3 fail:0 skip:0 total:3 ok 1 kunit-test-suite Signed-off-by: Rae Moar <rmoar@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-11-24 02:25:58 +08:00
/* Hack: print a ktap header so kunit.py can find the start of KUnit output. */
pr_info("KTAP version 1\n");
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
for (suites = suite_set->start; suites < suite_set->end; suites++) {
/* Print suite name and suite attributes */
pr_info("%s\n", (*suites)->name);
if (include_attr)
kunit_print_attr((void *)(*suites), false, 0);
/* Print test case name and attributes in suite */
kunit_suite_for_each_test_case((*suites), test_case) {
pr_info("%s.%s\n", (*suites)->name, test_case->name);
if (include_attr)
kunit_print_attr((void *)test_case, true, 0);
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
}
}
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
}
int kunit_run_all_tests(void)
{
struct suite_set suite_set = {__kunit_suites_start, __kunit_suites_end};
int err = 0;
if (!kunit_enabled()) {
pr_info("kunit: disabled\n");
goto out;
}
if (filter_glob_param || filter_param) {
suite_set = kunit_filter_suites(&suite_set, filter_glob_param,
filter_param, filter_action_param, &err);
if (err) {
pr_err("kunit executor: error filtering suites: %d\n", err);
goto out;
}
}
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
if (!action_param)
kunit_exec_run_tests(&suite_set);
else if (strcmp(action_param, "list") == 0)
kunit_exec_list_tests(&suite_set, false);
else if (strcmp(action_param, "list_attr") == 0)
kunit_exec_list_tests(&suite_set, true);
kunit: add 'kunit.action' param to allow listing out tests Context: It's difficult to map a given .kunitconfig => set of enabled tests. Letting kunit.py figure that out would be useful. This patch: * is intended to be an implementation detail used only by kunit.py * adds a kunit.action module param with one valid non-null value, "list" * for the "list" action, it simply prints out "<suite>.<test>" * leaves the kunit.py changes to make use of this for another patch. Note: kunit.filter_glob is respected for this and all future actions. Hack: we print a TAP header (but no test plan) to allow kunit.py to use the same code to pick up KUnit output that it does for normal tests. Since this is intended to be an implementation detail, it seems fine for now. Maybe in the future we output each test as SKIPPED or the like. Go with a more generic "action" param, since it seems like we might eventually have more modes besides just running or listing tests, e.g. * perhaps a benchmark mode that reruns test cases and reports timing * perhaps a deflake mode that reruns test cases that failed * perhaps a mode where we randomize test order to try and catch hermeticity bugs like "test a only passes if run after test b" Tested: $ ./tools/testing/kunit/kunit.py run --kernel_arg=kunit.action=list --raw_output=kunit ... TAP version 14 1..1 example.example_simple_test example.example_skip_test example.example_mark_skipped_test reboot: System halted Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01 06:20:45 +08:00
else
pr_err("kunit executor: unknown action '%s'\n", action_param);
if (filter_glob_param || filter_param) { /* a copy was made of each suite */
kunit_free_suite_set(suite_set);
}
out:
kunit_handle_shutdown();
return err;
}
#if IS_BUILTIN(CONFIG_KUNIT_TEST)
#include "executor_test.c"
#endif
#endif /* IS_BUILTIN(CONFIG_KUNIT) */