linux/drivers/leds/leds-powernv.c

350 lines
8.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
/*
* PowerNV LED Driver
*
* Copyright IBM Corp. 2015
*
* Author: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
* Author: Anshuman Khandual <khandual@linux.vnet.ibm.com>
*/
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <asm/opal.h>
/* Map LED type to description. */
struct led_type_map {
const int type;
const char *desc;
};
static const struct led_type_map led_type_map[] = {
{OPAL_SLOT_LED_TYPE_ID, "identify"},
{OPAL_SLOT_LED_TYPE_FAULT, "fault"},
{OPAL_SLOT_LED_TYPE_ATTN, "attention"},
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
{-1, NULL},
};
struct powernv_led_common {
/*
* By default unload path resets all the LEDs. But on PowerNV
* platform we want to retain LED state across reboot as these
* are controlled by firmware. Also service processor can modify
* the LEDs independent of OS. Hence avoid resetting LEDs in
* unload path.
*/
bool led_disabled;
/* Max supported LED type */
__be64 max_led_type;
/* glabal lock */
struct mutex lock;
};
/* PowerNV LED data */
struct powernv_led_data {
struct led_classdev cdev;
char *loc_code; /* LED location code */
int led_type; /* OPAL_SLOT_LED_TYPE_* */
struct powernv_led_common *common;
};
/* Returns OPAL_SLOT_LED_TYPE_* for given led type string */
static int powernv_get_led_type(const char *led_type_desc)
{
int i;
for (i = 0; i < ARRAY_SIZE(led_type_map); i++)
if (!strcmp(led_type_map[i].desc, led_type_desc))
return led_type_map[i].type;
return -1;
}
/*
* This commits the state change of the requested LED through an OPAL call.
* This function is called from work queue task context when ever it gets
* scheduled. This function can sleep at opal_async_wait_response call.
*/
static int powernv_led_set(struct powernv_led_data *powernv_led,
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
enum led_brightness value)
{
int rc, token;
u64 led_mask, led_value = 0;
__be64 max_type;
struct opal_msg msg;
struct device *dev = powernv_led->cdev.dev;
struct powernv_led_common *powernv_led_common = powernv_led->common;
/* Prepare for the OPAL call */
max_type = powernv_led_common->max_led_type;
led_mask = OPAL_SLOT_LED_STATE_ON << powernv_led->led_type;
if (value)
led_value = led_mask;
/* OPAL async call */
token = opal_async_get_token_interruptible();
if (token < 0) {
if (token != -ERESTARTSYS)
dev_err(dev, "%s: Couldn't get OPAL async token\n",
__func__);
return token;
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
}
rc = opal_leds_set_ind(token, powernv_led->loc_code,
led_mask, led_value, &max_type);
if (rc != OPAL_ASYNC_COMPLETION) {
dev_err(dev, "%s: OPAL set LED call failed for %s [rc=%d]\n",
__func__, powernv_led->loc_code, rc);
goto out_token;
}
rc = opal_async_wait_response(token, &msg);
if (rc) {
dev_err(dev,
"%s: Failed to wait for the async response [rc=%d]\n",
__func__, rc);
goto out_token;
}
rc = opal_get_async_rc(msg);
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
if (rc != OPAL_SUCCESS)
dev_err(dev, "%s : OAPL async call returned failed [rc=%d]\n",
__func__, rc);
out_token:
opal_async_release_token(token);
return rc;
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
}
/*
* This function fetches the LED state for a given LED type for
* mentioned LED classdev structure.
*/
static enum led_brightness powernv_led_get(struct powernv_led_data *powernv_led)
{
int rc;
__be64 mask, value, max_type;
u64 led_mask, led_value;
struct device *dev = powernv_led->cdev.dev;
struct powernv_led_common *powernv_led_common = powernv_led->common;
/* Fetch all LED status */
mask = cpu_to_be64(0);
value = cpu_to_be64(0);
max_type = powernv_led_common->max_led_type;
rc = opal_leds_get_ind(powernv_led->loc_code,
&mask, &value, &max_type);
if (rc != OPAL_SUCCESS && rc != OPAL_PARTIAL) {
dev_err(dev, "%s: OPAL get led call failed [rc=%d]\n",
__func__, rc);
return LED_OFF;
}
led_mask = be64_to_cpu(mask);
led_value = be64_to_cpu(value);
/* LED status available */
if (!((led_mask >> powernv_led->led_type) & OPAL_SLOT_LED_STATE_ON)) {
dev_err(dev, "%s: LED status not available for %s\n",
__func__, powernv_led->cdev.name);
return LED_OFF;
}
/* LED status value */
if ((led_value >> powernv_led->led_type) & OPAL_SLOT_LED_STATE_ON)
return LED_FULL;
return LED_OFF;
}
/*
* LED classdev 'brightness_get' function. This schedules work
* to update LED state.
*/
static int powernv_brightness_set(struct led_classdev *led_cdev,
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
enum led_brightness value)
{
struct powernv_led_data *powernv_led =
container_of(led_cdev, struct powernv_led_data, cdev);
struct powernv_led_common *powernv_led_common = powernv_led->common;
int rc;
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
/* Do not modify LED in unload path */
if (powernv_led_common->led_disabled)
return 0;
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
mutex_lock(&powernv_led_common->lock);
rc = powernv_led_set(powernv_led, value);
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
mutex_unlock(&powernv_led_common->lock);
return rc;
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
}
/* LED classdev 'brightness_get' function */
static enum led_brightness powernv_brightness_get(struct led_classdev *led_cdev)
{
struct powernv_led_data *powernv_led =
container_of(led_cdev, struct powernv_led_data, cdev);
return powernv_led_get(powernv_led);
}
/*
* This function registers classdev structure for any given type of LED on
* a given child LED device node.
*/
static int powernv_led_create(struct device *dev,
struct powernv_led_data *powernv_led,
const char *led_type_desc)
{
int rc;
/* Make sure LED type is supported */
powernv_led->led_type = powernv_get_led_type(led_type_desc);
if (powernv_led->led_type == -1) {
dev_warn(dev, "%s: No support for led type : %s\n",
__func__, led_type_desc);
return -EINVAL;
}
/* Create the name for classdev */
powernv_led->cdev.name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s",
powernv_led->loc_code,
led_type_desc);
if (!powernv_led->cdev.name)
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
return -ENOMEM;
powernv_led->cdev.brightness_set_blocking = powernv_brightness_set;
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
powernv_led->cdev.brightness_get = powernv_brightness_get;
powernv_led->cdev.brightness = LED_OFF;
powernv_led->cdev.max_brightness = LED_FULL;
/* Register the classdev */
rc = devm_led_classdev_register(dev, &powernv_led->cdev);
if (rc) {
dev_err(dev, "%s: Classdev registration failed for %s\n",
__func__, powernv_led->cdev.name);
}
return rc;
}
/* Go through LED device tree node and register LED classdev structure */
static int powernv_led_classdev(struct platform_device *pdev,
struct device_node *led_node,
struct powernv_led_common *powernv_led_common)
{
const char *cur = NULL;
int rc = -1;
struct property *p;
struct device_node *np;
struct powernv_led_data *powernv_led;
struct device *dev = &pdev->dev;
for_each_available_child_of_node(led_node, np) {
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
p = of_find_property(np, "led-types", NULL);
while ((cur = of_prop_next_string(p, cur)) != NULL) {
powernv_led = devm_kzalloc(dev, sizeof(*powernv_led),
GFP_KERNEL);
if (!powernv_led) {
of_node_put(np);
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
return -ENOMEM;
}
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
powernv_led->common = powernv_led_common;
powernv_led->loc_code = (char *)np->name;
rc = powernv_led_create(dev, powernv_led, cur);
if (rc) {
of_node_put(np);
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
return rc;
}
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
} /* while end */
}
return rc;
}
/* Platform driver probe */
static int powernv_led_probe(struct platform_device *pdev)
{
struct device_node *led_node;
struct powernv_led_common *powernv_led_common;
struct device *dev = &pdev->dev;
int rc;
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
led_node = of_find_node_by_path("/ibm,opal/leds");
if (!led_node) {
dev_err(dev, "%s: LED parent device node not found\n",
__func__);
return -EINVAL;
}
powernv_led_common = devm_kzalloc(dev, sizeof(*powernv_led_common),
GFP_KERNEL);
if (!powernv_led_common) {
rc = -ENOMEM;
goto out;
}
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
mutex_init(&powernv_led_common->lock);
powernv_led_common->max_led_type = cpu_to_be64(OPAL_SLOT_LED_TYPE_MAX);
platform_set_drvdata(pdev, powernv_led_common);
rc = powernv_led_classdev(pdev, led_node, powernv_led_common);
out:
of_node_put(led_node);
return rc;
leds/powernv: Add driver for PowerNV platform This patch implements LED driver for PowerNV platform using the existing generic LED class framework. PowerNV platform has below type of LEDs: - System attention Indicates there is a problem with the system that needs attention. - Identify Helps the user locate/identify a particular FRU or resource in the system. - Fault Indicates there is a problem with the FRU or resource at the location with which the indicator is associated. We register classdev structures for all individual LEDs detected on the system through LED specific device tree nodes. Device tree nodes specify what all kind of LEDs present on the same location code. It registers LED classdev structure for each of them. All the system LEDs can be found in the same regular path /sys/class/leds/. We don't use LED colors. We use LED node and led-types property to form LED classdev. Our LEDs have names in this format. <location_code>:<attention|identify|fault> Any positive brightness value would turn on the LED and a zero value would turn off the LED. The driver will return LED_FULL (255) for any turned on LED and LED_OFF (0) for any turned off LED. The platform level implementation of LED get and set state has been achieved through OPAL calls. These calls are made available for the driver by exporting from architecture specific codes. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-20 00:49:54 +08:00
}
/* Platform driver remove */
static int powernv_led_remove(struct platform_device *pdev)
{
struct powernv_led_common *powernv_led_common;
/* Disable LED operation */
powernv_led_common = platform_get_drvdata(pdev);
powernv_led_common->led_disabled = true;
/* Destroy lock */
mutex_destroy(&powernv_led_common->lock);
dev_info(&pdev->dev, "PowerNV led module unregistered\n");
return 0;
}
/* Platform driver property match */
static const struct of_device_id powernv_led_match[] = {
{
.compatible = "ibm,opal-v3-led",
},
{},
};
MODULE_DEVICE_TABLE(of, powernv_led_match);
static struct platform_driver powernv_led_driver = {
.probe = powernv_led_probe,
.remove = powernv_led_remove,
.driver = {
.name = "powernv-led-driver",
.of_match_table = powernv_led_match,
},
};
module_platform_driver(powernv_led_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("PowerNV LED driver");
MODULE_AUTHOR("Vasant Hegde <hegdevasant@linux.vnet.ibm.com>");