korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-29 14:05:19 +08:00
Code Issues Packages Projects Releases Wiki Activity
e3c95d5619
linux/drivers/gpu/drm/Makefile

192 lines
4.9 KiB
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
# SPDX-License-Identifier: GPL-2.0
drm: Add Allwinner A10 Display Engine support The Allwinner A10 and subsequent SoCs share the same display pipeline, with variations in the number of controllers (1 or 2), or the presence or not of some output (HDMI, TV, VGA) or not. Add a driver with a limited set of features for now, and we will hopefully support all of them eventually Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-29 16:36:23 +08:00
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
# Makefile for the drm device driver. This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro For CONFIG_DRM_USE_DYNAMIC_DEBUG=y, wrap __drm_dbg() & __drm_dev_dbg() in one of dyndbg's Factory macros: _dynamic_func_call_no_desc(). This adds the callsite descriptor into the code, and an entry for each into /proc/dynamic_debug/control. #> echo class DRM_UT_ATOMIC +p > /proc/dynamic_debug/control CONFIG_DRM_USE_DYNAMIC_DEBUG=y/n is configurable because of the .data footprint cost of per-callsite control; 56 bytes/site * ~2k for i915, ~4k callsites for amdgpu. This is large enough that a kernel builder might not want it. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20220912052852.1123868-5-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-12 13:28:47 +08:00
CFLAGS-$(CONFIG_DRM_USE_DYNAMIC_DEBUG) += -DDYNAMIC_DEBUG_MODULE
drm: split build lists one per line and sort While it takes more vertical space, sorted build lists with one object per line are arguably easier to manage, especially when there are conflicting changes. Split anything with more than one object file. v2: also split drm_cache.o and put it after drm_bridge.o (Andi) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221011140830.3257655-1-jani.nikula@intel.com
2022-10-11 22:08:30 +08:00
drm-y := \
drm_aperture.o \
drm_atomic.o \
drm_atomic_uapi.o \
drm_auth.o \
drm_blend.o \
drm_bridge.o \
drm_cache.o \
drm_client.o \
drm_client_modeset.o \
drm_color_mgmt.o \
drm_connector.o \
drm_crtc.o \
drm_displayid.o \
drm_drv.o \
drm_dumb_buffers.o \
drm_edid.o \
drm/eld: add helpers to modify the SADs of an ELD Occasionally it's necessary for drivers to modify the SADs of an ELD, but it's not so cool to have drivers poke at the ELD buffer directly. Using the helpers to translate between 3-byte SAD and struct cea_sad, add ELD helpers to get/set the SADs from/to an ELD. v2: s/i/sad_index/ (Mitul) Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8e9a05f2b1e0dd184132d636e1e778e8917ec25d.1698747331.git.jani.nikula@intel.com
2023-10-31 18:16:43 +08:00
drm_eld.o \
drm: split build lists one per line and sort While it takes more vertical space, sorted build lists with one object per line are arguably easier to manage, especially when there are conflicting changes. Split anything with more than one object file. v2: also split drm_cache.o and put it after drm_bridge.o (Andi) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221011140830.3257655-1-jani.nikula@intel.com
2022-10-11 22:08:30 +08:00
drm_encoder.o \
drm_file.o \
drm_fourcc.o \
drm_framebuffer.o \
drm_gem.o \
drm_ioctl.o \
drm_lease.o \
drm_managed.o \
drm_mm.o \
drm_mode_config.o \
drm_mode_object.o \
drm_modes.o \
drm_modeset_lock.o \
drm_plane.o \
drm_prime.o \
drm_print.o \
drm_property.o \
drm_syncobj.o \
drm_sysfs.o \
drm_trace_points.o \
drm_vblank.o \
drm_vblank_work.o \
drm_vma_manager.o \
drm_writeback.o
drm: Add a simple generator of random permutations When testing, we want a random but yet reproducible order in which to process elements. Here we create an array which is a random (using the Tausworthe PRNG) permutation of the order in which to execute. Note these are simple helpers intended to be merged upstream in lib/ v2: Tidier code by David Herrmann v3: Add reminder that this code is intended to be temporary, with at least the bulk of the prandom changes going to lib/ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-6-chris@chris-wilson.co.uk
2016-12-22 16:36:08 +08:00
drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
drm-$(CONFIG_COMPAT) += drm_ioc32.o
drm: Add panel support Add a very simple framework to register and lookup panels. Panel drivers can initialize a DRM panel and register it with the framework, allowing them to be retrieved and used by display drivers. Currently only support for DPMS and obtaining panel modes is provided. However it should be sufficient to enable a large number of panels. The framework should also be easily extensible to support more sophisticated kinds of panels such as DSI. The framework hasn't been tied into the DRM core, even though it should be easily possible to do so if that's what we want. In the current implementation, display drivers can simple make use of it to retrieve a panel, obtain its modes and control its DPMS mode. Note that this is currently only tested on systems that boot from a device tree. No glue code has been written yet for systems that use platform data, but it should be easy to add. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-30 19:36:43 +08:00
drm-$(CONFIG_DRM_PANEL) += drm_panel.o
drm: add of_graph endpoint helper to find possible CRTCs Add a helper to allow encoders to find their possible CRTCs from the OF graph without having to re-implement this functionality. We add a device_node to drm_crtc which corresponds with the port node in the DT description of the CRTC device. We can then scan the DRM device list for CRTCs to find their index, matching the appropriate CRTC using the port device_node, thus building up the possible CRTC mask. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-15 18:07:12 +08:00
drm-$(CONFIG_OF) += drm_of.o
drm/pci: Only build drm_pci.c if CONFIG_PCI is set Non-PCI systems should not build PCI helpers. Set up source code, header file and Makefile accordingly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203100406.9674-2-tzimmermann@suse.de
2019-12-03 18:03:55 +08:00
drm-$(CONFIG_PCI) += drm_pci.o
drm: split build lists one per line and sort While it takes more vertical space, sorted build lists with one object per line are arguably easier to manage, especially when there are conflicting changes. Split anything with more than one object file. v2: also split drm_cache.o and put it after drm_bridge.o (Andi) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221011140830.3257655-1-jani.nikula@intel.com
2022-10-11 22:08:30 +08:00
drm-$(CONFIG_DEBUG_FS) += \
drm_debugfs.o \
drm_debugfs_crc.o
drm: handle override and firmware EDID at drm_do_get_edid() level Handle debugfs override edid and firmware edid at the low level to transparently and completely replace the real edid. Previously, we practically only used the modes from the override EDID, and none of the other data, such as audio parameters. This change also prevents actual EDID reads when the EDID is to be overridden, but retains the DDC probe. This is useful if the reason for preferring override EDID are problems with reading the data, or corruption of the data. Move firmware EDID loading from helper to core, as the functionality moves to lower level as well. This will result in a change of module parameter from drm_kms_helper.edid_firmware to drm.edid_firmware, which arguably makes more sense anyway. Some future work remains related to override and firmware EDID validation. Like before, no validation is done for override EDID. The firmware EDID is validated separately in the loader. Some unification and deduplication would be in order, to validate all of them at the drm_do_get_edid() level, like "real" EDIDs. v2: move firmware loading to core v3: rebase, commit message refresh Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1e8a710bcac46e5136c1a7b430074893c81f364a.1505203831.git.jani.nikula@intel.com
2017-09-12 16:19:26 +08:00
drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
drm: split build lists one per line and sort While it takes more vertical space, sorted build lists with one object per line are arguably easier to manage, especially when there are conflicting changes. Split anything with more than one object file. v2: also split drm_cache.o and put it after drm_bridge.o (Andi) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221011140830.3257655-1-jani.nikula@intel.com
2022-10-11 22:08:30 +08:00
drm-$(CONFIG_DRM_PRIVACY_SCREEN) += \
drm_privacy_screen.o \
drm_privacy_screen_x86.o
drivers/accel: define kconfig and register a new major Add a new Kconfig for the accel subsystem. The Kconfig currently contains only the basic CONFIG_DRM_ACCEL option that will be used to decide whether to compile the accel registration code. Therefore, the kconfig option is defined as bool. The accel code will be compiled as part of drm.ko and will be called directly from the DRM core code. The reason we compile it as part of drm.ko and not as a separate module is because of cyclic dependency between drm.ko and the separate module (if it would have existed). This is due to the fact that DRM core code calls accel functions and vice-versa. The accelerator devices will be exposed to the user space with a new, dedicated major number - 261. The accel init function registers the new major number as a char device and create corresponding sysfs and debugfs root entries, similar to what is done in DRM init function. I added a new header called drm_accel.h to include/drm/, that will hold the prototypes of the drm_accel.c functions. In case CONFIG_DRM_ACCEL is set to 'N', that header will contain empty inline implementations of those functions, to allow DRM core code to compile successfully without dependency on CONFIG_DRM_ACCEL. I Updated the MAINTAINERS file accordingly with the newly added folder and I have taken the liberty to appropriate the dri-devel mailing list and the dri-devel IRC channel for the accel subsystem. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Melissa Wen <mwen@igalia.com>
2022-10-31 21:28:35 +08:00
drm-$(CONFIG_DRM_ACCEL) += ../../accel/drm_accel.o
drm: Put related statements next to each other in Makefile Give the Makefile a bit more structure by putting rules for core, helpers, drivers, etc next to each other. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-2-tzimmermann@suse.de
2022-04-21 15:31:01 +08:00
obj-$(CONFIG_DRM) += drm.o
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
drm: Put related statements next to each other in Makefile Give the Makefile a bit more structure by putting rules for core, helpers, drivers, etc next to each other. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-2-tzimmermann@suse.de
2022-04-21 15:31:01 +08:00
obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
#
# Memory-management helpers
#
drm: execution context for GEM buffers v7 This adds the infrastructure for an execution context for GEM buffers which is similar to the existing TTMs execbuf util and intended to replace it in the long term. The basic functionality is that we abstracts the necessary loop to lock many different GEM buffers with automated deadlock and duplicate handling. v2: drop xarray and use dynamic resized array instead, the locking overhead is unnecessary and measurable. v3: drop duplicate tracking, radeon is really the only one needing that. v4: fixes issues pointed out by Danilo, some typos in comments and a helper for lock arrays of GEM objects. v5: some suggestions by Boris Brezillon, especially just use one retry macro, drop loop in prepare_array, use flags instead of bool v6: minor changes suggested by Thomas, Boris and Danilo v7: minor typos pointed out by checkpatch.pl fixed Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Tested-by: Danilo Krummrich <dakr@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-2-christian.koenig@amd.com
2022-04-07 14:17:51 +08:00
#
obj-$(CONFIG_DRM_EXEC) += drm_exec.o
drm/gpuvm: allow building as module Currently, the DRM GPUVM does not have any core dependencies preventing a module build. Also, new features from subsequent patches require helpers (namely drm_exec) which can be built as module. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230920144343.64830-3-dakr@redhat.com
2023-09-20 22:42:35 +08:00
obj-$(CONFIG_DRM_GPUVM) += drm_gpuvm.o
drm: Put related statements next to each other in Makefile Give the Makefile a bit more structure by putting rules for core, helpers, drivers, etc next to each other. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-2-tzimmermann@suse.de
2022-04-21 15:31:01 +08:00
obj-$(CONFIG_DRM_BUDDY) += drm_buddy.o
drm: Move nomodeset kernel parameter to the DRM subsystem The "nomodeset" kernel cmdline parameter is handled by the vgacon driver but the exported vgacon_text_force() symbol is only used by DRM drivers. It makes much more sense for the parameter logic to be in the subsystem of the drivers that are making use of it. Let's move the vgacon_text_force() function and related logic to the DRM subsystem. While doing that, rename it to drm_firmware_drivers_only() and make it return true if "nomodeset" was used and false otherwise. This is a better description of the condition that the drivers are testing for. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-4-javierm@redhat.com
2021-11-12 21:32:27 +08:00
drm/gem: rename GEM CMA helpers to GEM DMA helpers Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-02 08:04:03 +08:00
drm_dma_helper-y := drm_gem_dma_helper.o
drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers Implement fbdev emulation that is optimized for drivers that use DMA helpers. The buffers may no tbe moveable, may not require damage handling and have to be located in system memory. This allows fbdev emulation to operate directly on the buffer and mmap it to userspace. Besides those constraints, the emulation works like in the generic code. As an internal DRM client provides, it receives hotplug, restore and unregister events. The DRM client is independent from the fbdev probing, which runs on the first successful hotplug event. The emulation is part of the DMA helper module and not build unless DMA helpers and fbdev emulation has been configured. Tested with vc4. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-2-tzimmermann@suse.de
2023-03-13 23:51:14 +08:00
drm_dma_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fbdev_dma.o
drm/gem: rename GEM CMA helpers to GEM DMA helpers Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-02 08:04:03 +08:00
drm_dma_helper-$(CONFIG_DRM_KMS_HELPER) += drm_fb_dma_helper.o
obj-$(CONFIG_DRM_GEM_DMA_HELPER) += drm_dma_helper.o
drm: Move GEM memory managers into modules DRM core uses the GEM base object to access GEM functionality. It does not depend on individual implementations. Move the code into modules. Also move the CMA framebuffer helpers into the CMA's module, as they're not usable without CMA. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211020131941.15367-4-tzimmermann@suse.de
2021-10-20 21:19:41 +08:00
drm_shmem_helper-y := drm_gem_shmem_helper.o
obj-$(CONFIG_DRM_GEM_SHMEM_HELPER) += drm_shmem_helper.o
drm/suballoc: Extract amdgpu_sa.c as generic suballocation helper Suballocating a buffer object is something that is not driver-specific and useful for many drivers. Use a slightly modified version of amdgpu_sa.c v2: - Style cleanups. - Added / Modified documentation. - Use u64 for the sizes and offset. The code dates back to 2012 and using unsigned int will probably soon come back to bite us. We can consider size_t as well for better 32-bit efficiency. - Add and document gfp, intr and align arguments to drm_suballoc_new(). - Use drm_printer for debug output. v3: - Remove stale author info (Christian König) v4: - Avoid 64-bit integer divisions (kernel test robot <lkp@intel.com>) - Use size_t rather than u64 for the managed range. (Thomas) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230224095152.30134-2-thomas.hellstrom@linux.intel.com
2023-02-24 17:51:50 +08:00
drm_suballoc_helper-y := drm_suballoc.o
obj-$(CONFIG_DRM_SUBALLOC_HELPER) += drm_suballoc_helper.o
drm/vram-helpers: Merge code into a single file Most of the documentation was in an otherwise empty file, which was probably just left from a previous clean-up effort. So move code and documentation into a single file. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200331081238.24749-1-tzimmermann@suse.de
2020-03-31 16:12:38 +08:00
drm_vram_helper-y := drm_gem_vram_helper.o
drm: Add |struct drm_gem_vram_object| and helpers The type |struct drm_gem_vram_object| implements a GEM object for simple framebuffer devices with dedicated video memory. The BO is either located in VRAM or system memory. The implementation has been created from the respective code in ast, bochs and mgag200. These drivers copy their implementation from each other; except for the names of several data types. The helpers are currently build with TTM, but this is considered an implementation detail and may change in future updates. v5: * do WARN_ON_ONCE for pin-count mismatches * allocate only 2 entries in placements array v4: * cleanups from checkpatch.pl * removed several fixed-size types from interfaces * DRM_VRAM_HELPER now selects DRM_TTM * remove separate config option for GEM VRAM v2: * rename to |struct drm_gem_vram_object| * move drm_is_gem_ttm() to a later patch in the series * add drm_gem_vram_kmap_at() * return is_iomem from kmap functions * redefine TTM placement flags for public interface * documentation fixes Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-2-tzimmermann@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-08 16:26:11 +08:00
obj-$(CONFIG_DRM_VRAM_HELPER) += drm_vram_helper.o
drm/ttm: add drm gem ttm helpers, starting with drm_gem_ttm_print_info() Now with ttm_buffer_object being a subclass of drm_gem_object we can easily lookup ttm_buffer_object for a given drm_gem_object, which in turn allows to create common helper functions. This patch starts off with a drm_gem_ttm_print_info() helper function which adds some ttm specific lines to the debug output. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20190904054740.20817-3-kraxel@redhat.com
2019-09-04 13:47:35 +08:00
drm_ttm_helper-y := drm_gem_ttm_helper.o
obj-$(CONFIG_DRM_TTM_HELPER) += drm_ttm_helper.o
drm: Put related statements next to each other in Makefile Give the Makefile a bit more structure by putting rules for core, helpers, drivers, etc next to each other. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-2-tzimmermann@suse.de
2022-04-21 15:31:01 +08:00
#
# Modesetting helpers
#
drm: split build lists one per line and sort While it takes more vertical space, sorted build lists with one object per line are arguably easier to manage, especially when there are conflicting changes. Split anything with more than one object file. v2: also split drm_cache.o and put it after drm_bridge.o (Andi) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221011140830.3257655-1-jani.nikula@intel.com
2022-10-11 22:08:30 +08:00
drm_kms_helper-y := \
drm_atomic_helper.o \
drm_atomic_state_helper.o \
drm_bridge_connector.o \
drm_crtc_helper.o \
drm_damage_helper.o \
drm_encoder_slave.o \
drm_flip_work.o \
drm_format_helper.o \
drm_gem_atomic_helper.o \
drm_gem_framebuffer_helper.o \
drm_kms_helper_common.o \
drm_modeset_helper.o \
drm_plane_helper.o \
drm_probe_helper.o \
drm_rect.o \
drm_self_refresh_helper.o \
drm_simple_kms_helper.o
drm/bridge: Build the panel wrapper in drm_kms_helper This fixes the following depmod error when building drm as a module: depmod: ERROR: Found 6 modules in dependency cycles! depmod: ERROR: Cycle detected: drm -> drm_kms_helper -> drm Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.") Tested-by: Lofstedt, Marta <marta.lofstedt@intel.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/3fd262cf-1db6-4335-320c-af92f9014502@linux.intel.com
2017-06-06 22:31:50 +08:00
drm_kms_helper-$(CONFIG_DRM_PANEL_BRIDGE) += bridge/panel.o
drm/fb-helper: Move generic fbdev emulation into separate source file Move the generic fbdev implementation into its own source and header file. Adapt drivers. No functional changes, but some of the internal helpers have been renamed to fit into the drm_fbdev_ naming scheme. v3: * rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h} * rebase onto vmwgfx changes * rebase onto xlnx changes * fix include statements in amdgpu Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
2022-11-03 23:14:44 +08:00
drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += \
drm_fbdev_generic.o \
drm_fb_helper.o
drm/kms: fix kms helper license + Kconfig Allow the KMS module to work properly, and also rename it to KMS_HELPER so its clearer what its for. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-08 09:08:32 +08:00
obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o
drm: Put related statements next to each other in Makefile Give the Makefile a bit more structure by putting rules for core, helpers, drivers, etc next to each other. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-2-tzimmermann@suse.de
2022-04-21 15:31:01 +08:00
#
# Drivers and the rest
#
drm/tests: Introduce a config option for the KUnit helpers Driver-specific tests will need access to the helpers without pulling every DRM framework test. Let's create an intermediate Kconfig options for the helpers. Suggested-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-2-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-01 23:11:33 +08:00
obj-y += tests/
drm: split crtc/fb helpers into a separate module I really don't want to have core drm module rely on CONFIG_FB, so this is the easiest answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07 13:45:33 +08:00
drm/tinydrm: Move mipi-dbi This moves mipi-dbi to be a core helper with the name drm_mipi_dbi. Fixup include's in drivers. Move the docs entry and delete tinydrm.rst. Delete the last tinydrm todo entry. v2: Make DRM_MIPI_DBI tristate to enable it being built as a module. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: David Lechner <david@lechnology.com> Acked-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-9-noralf@tronnes.org
2019-07-22 18:43:11 +08:00
obj-$(CONFIG_DRM_MIPI_DBI) += drm_mipi_dbi.o
drm: Add MIPI DSI bus support MIPI DSI bus allows to model DSI hosts and DSI peripherals using the Linux driver model. DSI hosts are registered by the DSI host drivers. During registration DSI peripherals will be created from the children of the DSI host's device tree node. Support for registration from board-setup code will be added later when needed. DSI hosts expose operations which can be used by DSI peripheral drivers to access associated devices. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-04 23:35:12 +08:00
obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
drm/arm: Delete redundant CONFIG_DRM_ARM Delete redundant CONFIG_DRM_ARM, and add a menu "ARM devices" to subclass ARM device drivers. Signed-off-by: James (Qian) Wang <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2018-12-05 11:41:35 +08:00
obj-y += arm/
drm: Rename dp/ to display/ Rename dp/ to display/ to account for additional display-related helpers, such as HDMI. Update all related include statements. No functional changes. Various drivers, such as i915 and amdgpu, use similar naming scheme by putting code for video-output standards into a local display/ directory. The new directory's name is aligned with this convention. v2: * update commit message (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
2022-04-21 15:31:02 +08:00
obj-y += display/
drm/radeon: fix driver initialization order so radeon kms can be builtin TTM need to be initialized before radeon if KMS is enabled otherwise the kernel will crash hard. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-06-23 00:16:13 +08:00
obj-$(CONFIG_DRM_TTM) += ttm/
drm: fix gpu scheduler link order It should initialize before the drivers using it. Signed-off-by: Christian König <christian.koenig@amd.com> Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104736 Reviewed-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-24 18:44:49 +08:00
obj-$(CONFIG_DRM_SCHED) += scheduler/
drm: reorganise drm tree to be more future proof. With the coming of kernel based modesetting and the memory manager stuff, the everything in one directory approach was getting very ugly and starting to be unmanageable. This restructures the drm along the lines of other kernel components. It creates a drivers/gpu/drm directory and moves the hw drivers into subdirectores. It moves the includes into an include/drm, and sets up the unifdef for the userspace headers we should be exporting. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-05-29 08:09:59 +08:00
obj-$(CONFIG_DRM_RADEON)+= radeon/
drm/amdgpu: add core driver (v4) This adds the non-asic specific core driver code. v2: remove extra kconfig option v3: implement minor fixes from Fengguang Wu v4: fix cast in amdgpu_ucode.c Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Jammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-21 04:55:21 +08:00
obj-$(CONFIG_DRM_AMDGPU)+= amd/amdgpu/
drm/amdxcp: add platform device driver for amdxcp Add platform device driver for amdxcp to support amdgpu spatial partition. -v2: fix build warning Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26 05:00:50 +08:00
obj-$(CONFIG_DRM_AMDGPU)+= amd/amdxcp/
drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass Very old numbers indicate this is a 66% improvement when remapping the entire object for fence contention - due to the elimination of track_pfn_insert and its strcmp. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Testcase: igt/gem_fence_upload/performance Testcase: igt/gem_mmap_gtt Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160819155428.1670-6-chris@chris-wilson.co.uk
2016-08-19 23:54:28 +08:00
obj-$(CONFIG_DRM_I915) += i915/
drm/xe: Introduce a new DRM driver for Intel GPUs Xe, is a new driver for Intel GPUs that supports both integrated and discrete platforms starting with Tiger Lake (first Intel Xe Architecture). The code is at a stage where it is already functional and has experimental support for multiple platforms starting from Tiger Lake, with initial support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan drivers), as well as in NEO (for OpenCL and Level0). The new Xe driver leverages a lot from i915. As for display, the intent is to share the display code with the i915 driver so that there is maximum reuse there. But it is not added in this patch. This initial work is a collaboration of many people and unfortunately the big squashed patch won't fully honor the proper credits. But let's get some git quick stats so we can at least try to preserve some of the credits: Co-developed-by: Matthew Brost <matthew.brost@intel.com> Co-developed-by: Matthew Auld <matthew.auld@intel.com> Co-developed-by: Matt Roper <matthew.d.roper@intel.com> Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Co-developed-by: Francois Dugast <francois.dugast@intel.com> Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com> Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com> Co-developed-by: Nirmoy Das <nirmoy.das@intel.com> Co-developed-by: Jani Nikula <jani.nikula@intel.com> Co-developed-by: José Roberto de Souza <jose.souza@intel.com> Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Co-developed-by: Dave Airlie <airlied@redhat.com> Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com> Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com>
2023-03-31 05:31:57 +08:00
obj-$(CONFIG_DRM_XE) += xe/
drm/kmb: Build files for KeemBay Display driver v2: Added Maintainer entry v3: Added one more Maintainer entry v3: drop videomode_helpers Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1604538931-26726-8-git-send-email-anitha.chrisanthus@intel.com
2020-11-05 09:15:31 +08:00
obj-$(CONFIG_DRM_KMB_DISPLAY) += kmb/
mgag200: initial g200se driver (v2) This is a driver for the G200 server engines chips, it doesn't driver any of the Matrix G series desktop cards. It will bind to G200 SE A,B, G200EV, G200WB, G200EH and G200ER cards. Its based on previous work done my Matthew Garrett but remodelled to follow the same style and flow as the AST server driver. It also works along the same lines as the AST server driver wrt memory management. There is no userspace driver planned, xf86-video-modesetting should be used. It also appears these GPUs have no ARGB hw cursors. v2: add missing tagfifo reset + G200 SE memory bw setup pieces. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-17 22:01:25 +08:00
obj-$(CONFIG_DRM_MGAG200) += mgag200/
drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+ This driver will be used to support Mesa on the Broadcom 7268 and 7278 platforms. V3D 3.3 introduces an MMU, which means we no longer need CMA or vc4's complicated CL/shader validation scheme. This massively changes the GEM behavior, so I've forked off to a new driver. v2: Mark SUBMIT_CL as needing DRM_AUTH. coccinelle fixes from kbuild test robot. Drop personal git link from MAINTAINERS. Don't double-map dma-buf imported BOs. Add kerneldoc about needing MMU eviction. Drop prime vmap/unmap stubs. Delay mmap offset setup to mmap time. Use drm_dev_init instead of _alloc. Use ktime_get() for wait_bo timeouts. Drop drm_can_sleep() usage, since we don't modeset. Switch page tables back to WC (debug change to coherent had slipped in). Switch drm_gem_object_unreference_unlocked() to drm_gem_object_put_unlocked(). Simplify overflow mem handling by not sharing overflow mem between jobs. v3: no changes v4: align submit_cl to 64 bits (review by airlied), check zero flags in other ioctls. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v4) Acked-by: Dave Airlie <airlied@linux.ie> (v3, requested submit_cl change) Link: https://patchwork.freedesktop.org/patch/msgid/20180430181058.30181-3-eric@anholt.net
2018-05-01 02:10:58 +08:00
obj-$(CONFIG_DRM_V3D) += v3d/
drm/vc4: Add KMS support for Raspberry Pi. This is enough for fbcon and bringing up X using xf86-video-modesetting. It doesn't support the 3D accelerator or power management yet. v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init ordering instead of using the .load hook. Structure registration more like tegra's, but still using the typical "component" code. Drop no-op hooks for atomic_begin and mode_fixup() now that they're optional. Drop sentinel in Makefile. Fix minor style nits I noticed on another reread. v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead of having a fixed video mode. Use exynos-style component driver matching instead of devicetree nodes to list the component driver instances. Rename compatibility strings to say bcm2835, and distinguish pv0/1/2. Clean up some h/vsync code, and add in interlaced mode setup. Fix up probe/bind error paths. Use bitops.h macros for vc4_regs.h v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now that other bugs have been fixed, add timeouts to cpu_relax() loops, rename hpd-gpio to hpd-gpios. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-03 05:01:12 +08:00
obj-$(CONFIG_DRM_VC4) += vc4/
drm/vmwgfx: Add DRM driver for VMware Virtual GPU This commit adds the vmwgfx driver for the VWware Virtual GPU aka SVGA. The driver is under staging the same as Nouveau and Radeon KMS. Hopefully the 2D ioctls are bug free and don't need changing, so that part of the API should be stable. But there there is a pretty big chance that the 3D API will change in the future. Signed-off-by: Thomas Hellström <thellstrom@vmware.com> Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 08:19:58 +08:00
obj-$(CONFIG_DRM_VMWGFX)+= vmwgfx/
drm/vgem: implement virtual GEM This patch implements the virtual GEM driver with PRIME sharing which allows vgem to import a gem object from other drivers for the purpose of mmap-ing them to userspace. The mmap is done using the mmap operation exported by other drivers. v2: remove platform_device and do not attach to dma bufs v3: use drm helpers for get/put pages v4: correct dumb create pitch Reviewed-by: Rob Clark <robdclark@gmail.com> (v3) Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> (v3) Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Zach Reizner <zachr@google.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-03-05 08:33:41 +08:00
obj-$(CONFIG_DRM_VGEM) += vgem/
drm/vkms: Introduce basic VKMS driver This patch introduces Virtual Kernel Mode-Setting (VKMS) driver. It creates a very basic kms driver with 1 crtc/encoder/connector/plane. VKMS driver would be useful for testing, or for running X (or similar) on headless machines and be able to still use the GPU. Thus it enables a virtual display without the need for hardware display capability. Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180514143346.GA21695@haneen-vb
2018-05-14 22:33:46 +08:00
obj-$(CONFIG_DRM_VKMS) += vkms/
drm/nouveau: Add DRM driver for NVIDIA GPUs This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA. This driver is a KMS-based driver and requires a compatible nouveau userspace libdrm and nouveau X.org driver. This driver requires firmware files not available in this kernel tree, interested parties can find them via the nouveau project git archive. This driver is reverse engineered, and is in no way supported by nVidia. Support for nearly the complete range of nvidia hw from nv04->g80 (nv50) is available, and the kms driver should support driving nearly all output types (displayport is under development still) along with supporting suspend/resume. This work is all from the upstream nouveau project found at nouveau.freedesktop.org. The original authors list from nouveau git tree is: Anssi Hannula <anssi.hannula@iki.fi> Ben Skeggs <bskeggs@redhat.com> Francisco Jerez <currojerez@riseup.net> Maarten Maathuis <madman2003@gmail.com> Marcin Kościelnicki <koriakin@0x04.net> Matthew Garrett <mjg@redhat.com> Matt Parnell <mparnell@gmail.com> Patrice Mandin <patmandin@gmail.com> Pekka Paalanen <pq@iki.fi> Xavier Chantry <shiningxc@gmail.com> along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 17:24:15 +08:00
obj-$(CONFIG_DRM_NOUVEAU) +=nouveau/
DRM: add DRM Driver for Samsung SoC EXYNOS4210. This patch is a DRM Driver for Samsung SoC Exynos4210 and now enables only FIMD yet but we will add HDMI support also in the future. this patch is based on git repository below: git://people.freedesktop.org/~airlied/linux.git branch name: drm-next commit-id: 88ef4e3f4f616462b78a7838eb3ffc3818d30f67 you can refer to our working repository below: http://git.infradead.org/users/kmpark/linux-2.6-samsung branch name: samsung-drm We tried to re-use lowlevel codes of the FIMD driver(s3c-fb.c based on Linux framebuffer) but couldn't so because lowlevel codes of s3c-fb.c are included internally and so FIMD module of this driver has its own lowlevel codes. We used GEM framework for buffer management and DMA APIs(dma_alloc_*) for buffer allocation so we can allocate physically continuous memory for DMA through it and also we could use CMA later if CMA is applied to mainline. Refer to this link for CMA(Continuous Memory Allocator): http://lkml.org/lkml/2011/7/20/45 this driver supports only physically continuous memory(non-iommu). Links to previous versions of the patchset: v1: < https://lwn.net/Articles/454380/ > v2: < http://www.spinics.net/lists/kernel/msg1224275.html > v3: < http://www.spinics.net/lists/dri-devel/msg13755.html > v4: < http://permalink.gmane.org/gmane.comp.video.dri.devel/60439 > v5: < http://comments.gmane.org/gmane.comp.video.dri.devel/60802 > Changelog v2: DRM: add DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl command. this feature maps user address space to physical memory region once user application requests DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl. DRM: code clean and add exception codes. Changelog v3: DRM: Support multiple irq. FIMD and HDMI have their own irq handler but DRM Framework can regiter only one irq handler this patch supports mutiple irq for Samsung SoC. DRM: Consider modularization. each DRM, FIMD could be built as a module. DRM: Have indenpendent crtc object. crtc isn't specific to SoC Platform so this patch gets a crtc to be used as common object. created crtc could be attached to any encoder object. DRM: code clean and add exception codes. Changelog v4: DRM: remove is_defult from samsung_fb. is_default isn't used for default framebuffer. DRM: code refactoring to fimd module. this patch is be considered with multiple display objects and would use its own request_irq() to register a irq handler instead of drm framework's one. DRM: remove find_samsung_drm_gem_object() DRM: move kernel private data structures and definitions to driver folder. samsung_drm.h would contain only public information for userspace ioctl interface. DRM: code refactoring to gem modules. buffer module isn't dependent of gem module anymore. DRM: fixed security issue. DRM: remove encoder porinter from specific connector. samsung connector doesn't need to have generic encoder. DRM: code clean and add exception codes. Changelog v5: DRM: updated fimd(display controller) driver. added various pixel formats, color key and pixel blending features. DRM: removed end_buf_off from samsung_drm_overlay structure. this variable isn't used and end buffer address would be calculated by each sub driver. DRM: use generic function for mmap_offset. replaced samsung_drm_gem_create_mmap_offset() and samsung_drm_free_mmap_offset() with generic ones applied to mainline recentrly. DRM: removed unnecessary codes and added exception codes. DRM: added comments and code clean. Changelog v6: DRM: added default config options. DRM: added padding for 64-bit align. DRM: changed prefix 'samsung' to 'exynos' Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-04 18:19:01 +08:00
obj-$(CONFIG_DRM_EXYNOS) +=exynos/
drm: rockchip: Add basic drm driver This patch adds the basic structure of a DRM Driver for Rockchip Socs. Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-08-22 18:36:26 +08:00
obj-$(CONFIG_DRM_ROCKCHIP) +=rockchip/
gma500: Now connect up to the DRM build to finish the job Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-04 02:22:48 +08:00
obj-$(CONFIG_DRM_GMA500) += gma500/
drm/udl: initial UDL driver (v4) This is an initial drm/kms driver for the displaylink devices. Supports fb_defio, supports KMS dumb interface supports 24bpp via conversion to 16bpp, hw can do this better. supports hot unplug using new drm core features. On an unplug, it disables connector polling, unplugs connectors from sysfs, unplugs fbdev layer (using Kay's API), drops all the USB device URBs, and call the drm core to unplug the device. This driver is based in large parts on udlfb.c so I've licensed it under GPLv2. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-15 05:14:24 +08:00
obj-$(CONFIG_DRM_UDL) += udl/
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2) This is the initial driver for the Aspeed Technologies chips found in servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It doesn't support the AST11xx due to lack of hw to test it on, and them requiring different codepaths. This driver is intended to be used with xf86-video-modesetting in userspace. This driver has a slightly different design than other KMS drivers, but future server chips will probably share similiar setup. As these GPUs commonly have low video RAM, it doesn't make sense to put the kms console in VRAM always. This driver places the kms console into system RAM, and does dirty updates to a copy in video RAM. When userspace sets a new scanout buffer, it forcefully evicts the video RAM console, and X can create a framebuffer that can use all of of video RAM. This driver uses TTM but in a very simple fashion to control the eviction to system RAM of the console, and multiple servers. v2: add s/r support, fix Kconfig. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 21:40:04 +08:00
obj-$(CONFIG_DRM_AST) += ast/
DRM: Armada: Add Armada DRM driver This patch adds support for the pair of LCD controllers on the Marvell Armada 510 SoCs. This driver supports: - multiple contiguous scanout buffers for video and graphics - shm backed cacheable buffer objects for X pixmaps for Vivante GPU acceleration - dual lcd0 and lcd1 crt operation - video overlay on each LCD crt via DRM planes - page flipping of the main scanout buffers - DRM prime for buffer export/import This driver is trivial to extend to other Armada SoCs. Included in this commit is the core driver with no output support; output support is platform and encoder driver dependent. Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-15 20:59:49 +08:00
obj-$(CONFIG_DRM_ARMADA) += armada/
drm: add Atmel HLCDC Display Controller support The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display controller device. This display controller supports at least one primary plane and might provide several overlays and an hardware cursor depending on the IP version. At the moment, this driver only implements an RGB connector to interface with LCD panels, but support for other kind of external devices might be added later. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-06 18:13:28 +08:00
obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/
drm: Place Renesas drivers in a separate dir Create vendor specific renesas directory and move renesas drivers to that directory. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2023-05-02 18:09:08 +08:00
obj-y += renesas/
drm/omap: move omapdss & displays under omapdrm Now that omapfb has its own copy of omapdss and display drivers, we can move omapdss and display drivers which omapdrm uses to omapdrm's directory. We also need to change the main drm Makefile so that omapdrm directory is always entered, because omapdss has a file that can't be built as a module. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Dave Airlie <airlied@gmail.com> Acked-by: Rob Clark <robdclark@gmail.com>
2015-12-10 02:26:00 +08:00
obj-y += omapdrm/
drm: Add Allwinner A10 Display Engine support The Allwinner A10 and subsequent SoCs share the same display pipeline, with variations in the number of controllers (1 or 2), or the presence or not of some output (HDMI, TV, VGA) or not. Add a driver with a limited set of features for now, and we will hopefully support all of them eventually Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-29 16:36:23 +08:00
obj-$(CONFIG_DRM_SUN4I) += sun4i/
drm/tilcdc: Force building of DRM_TILCDC_SLAVE_COMPAT If I read Documentation/kbuild/makefiles.txt section 3.6 right, this patch should not be needed. However, without this patch the objects needed for DRM_TILCDC_SLAVE_COMPAT are not linked, if DRM_TILCDC is built as module. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-18 18:26:50 +08:00
obj-y += tilcdc/
drm: add new QXL driver. (v1.4) QXL is a paravirtual graphics device used by the Spice virtual desktop interface. The drivers uses GEM and TTM to manage memory, the qxl hw fencing however is quite different than normal TTM expects, we have to keep track of a number of non-linear fence ids per bo that we need to have released by the hardware. The releases are freed from a workqueue that wakes up and processes the release ring. releases are suballocated from a BO, there are 3 release categories, drawables, surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling. The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface ids. This requires a newer version of the QXL userspace driver, so shouldn't be enabled until that has been placed into your distro of choice. Authors: Dave Airlie, Alon Levy v1.1: fixup some issues in the ioctl interface with padding v1.2: add module device table v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq, don't try flush release ring (broken hw), fix -modesetting. v1.4: fbcon cpu usage reduction + suitable accel flags. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 12:47:55 +08:00
obj-$(CONFIG_DRM_QXL) += qxl/
Add virtio gpu driver. This patch adds a kms driver for the virtio gpu. The xorg modesetting driver can handle the device just fine, the framebuffer for fbcon is there too. Qemu patches for the host side are under review currently. The pci version of the device comes in two variants: with and without vga compatibility. The former has a extra memory bar for the vga framebuffer, the later is a pure virtio device. The only concern for this driver is that in the virtio-vga case we have to kick out the firmware framebuffer. Initial revision has only 2d support, 3d (virgl) support requires some more work on the qemu side and will be added later. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-09 08:02:56 +08:00
obj-$(CONFIG_DRM_VIRTIO_GPU) += virtio/
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
obj-$(CONFIG_DRM_MSM) += msm/
drm/tegra: Move driver to DRM tree In order to make subsystem-wide changes easier, move the Tegra DRM driver back into the DRM tree. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-09 16:32:49 +08:00
obj-$(CONFIG_DRM_TEGRA) += tegra/
drm/stm: Add STM32 LTDC driver This controller provides output signals to interface directly a variety of LCD and TFT panels. These output signals are: RGB signals (up to 24bpp), vertical & horizontal synchronisations, data enable and the pixel clock. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-5-git-send-email-yannick.fertre@st.com Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-04-14 18:13:34 +08:00
obj-$(CONFIG_DRM_STM) += stm/
drm: sti: add VTG driver Video Time Generator drivers are used to synchronize the compositor and tvout hardware IPs by providing line count, sample count, synchronization signals (HSYNC, VSYNC) and top and bottom fields indication. VTG are used by pair for each data path (main or auxiliary) one for master and one for slave. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-31 00:20:56 +08:00
obj-$(CONFIG_DRM_STI) += sti/
drm/imx: compile imx directory by default Currently the drm/imx/ directory is compiled only if DRM_IMX is set. Adding a new IMX related IP in the same directory would need DRM_IMX to be set, which would bring in also IPUv3 core driver... The current patch would allow adding new IPs in the imx/ directory without needing to set DRM_IMX. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200731081836.3048-2-laurentiu.palcu@oss.nxp.com
2020-07-31 16:18:29 +08:00
obj-y += imx/
DRM: Add KMS driver for the Ingenic JZ47xx SoCs Add a KMS driver for the Ingenic JZ47xx family of SoCs. This driver is meant to replace the aging jz4740-fb driver. This driver does not make use of the simple pipe helper, for the reason that it will soon be updated to support more advanced features like multiple planes, IPU integration for colorspace conversion and up/down scaling, support for DSI displays, and TV-out and HDMI outputs. Notes: v2: - Remove custom handling of panel. The panel is now discovered using the standard API. - Lots of small tweaks suggested by upstream v3: - Use devm_drm_dev_init() - Update compatible strings to -lcd instead of -drm - Add destroy() callbacks to plane and crtc - The ingenic,lcd-mode is now read from the bridge's DT node v4: Remove ingenic,lcd-mode property completely. The various modes are now deduced from the connector type, the pixel format or the bus flags. v5: - Fix framebuffer size incorrectly calculated for 24bpp framebuffers - Use 32bpp framebuffer instead of 16bpp, as it'll work with both 16-bit and 24-bit panel - Get rid of drm_format_plane_cpp() which has been dropped upstream - Avoid using drm_format_info->depth, which is deprecated. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190603152331.23160-2-paul@crapouillou.net
2019-06-03 23:23:31 +08:00
obj-$(CONFIG_DRM_INGENIC) += ingenic/
drm: Add support for the LogiCVC display controller Introduces a driver for the LogiCVC display controller, a programmable logic controller optimized for use in Xilinx Zynq-7000 SoCs and other Xilinx FPGAs. The controller is mostly configured at logic synthesis time so only a subset of configuration is left for the driver to handle. The following features are implemented and tested: - LVDS 4-bit interface; - RGB565 pixel formats; - Multiple layers and hardware composition; - Layer-wide alpha mode; The following features are implemented but untested: - Other RGB pixel formats; - Layer framebuffer configuration for version 4; - Lowest-layer used as background color; - Per-pixel alpha mode. The following features are not implemented: - YUV pixel formats; - DVI, LVDS 3-bit, ITU656 and camera link interfaces; - External parallel input for layer; - Color-keying; - LUT-based alpha modes. Additional implementation-specific notes: - Panels are only enabled after the first page flip to avoid flashing a white screen. - Depth used in context of the LogiCVC driver only counts color components to match the definition of the synthesis parameters. Support is implemented for both version 3 and 4 of the controller. With version 3, framebuffers are stored in a dedicated contiguous memory area, with a base address hardcoded for each layer. This requires using a dedicated CMA pool registered at the base address and tweaking a few offset-related registers to try to use any buffer allocated from the pool. This is done on a best-effort basis to have the hardware cope with the DRM framebuffer allocation model and there is no guarantee that each buffer allocated by GEM CMA can be used for any layer. In particular, buffers allocated below the base address for a layer are guaranteed not to be configurable for that layer. See the implementation of logicvc_layer_buffer_find_setup for specifics. Version 4 allows configuring each buffer address directly, which guarantees that any buffer can be configured. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220520141555.1429041-2-paul.kocialkowski@bootlin.com
2022-05-20 22:15:55 +08:00
obj-$(CONFIG_DRM_LOGICVC) += logicvc/
drm/mediatek: Add DRM Driver for Mediatek SoC MT8173. This patch adds an initial DRM driver for the Mediatek MT8173 DISP subsystem. It currently supports two fixed output streams from the OVL0/OVL1 sources to the DSI0/DPI0 sinks, respectively. Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: YT Shen <yt.shen@mediatek.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Mao Huang <littlecvr@chromium.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-01-05 01:36:34 +08:00
obj-$(CONFIG_DRM_MEDIATEK) += mediatek/
drm: Add support for Amlogic Meson Graphic Controller The Amlogic Meson Display controller is composed of several components : DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| | vd1 _______ _____________ _________________ | | D |-------| |----| | | | | HDMI PLL | D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | R |-------| |----| Processing | | | | | | osd2 | | | |---| Enci ----------|----|-----VDAC------| R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| A | osd1 | | | Blenders | | Encl ----------|----|---------------| M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| VIU: Video Input Unit --------------------- The Video Input Unit is in charge of the pixel scanout from the DDR memory. It fetches the frames addresses, stride and parameters from the "Canvas" memory. This part is also in charge of the CSC (Colorspace Conversion). It can handle 2 OSD Planes and 2 Video Planes. VPP: Video Post Processing -------------------------- The Video Post Processing is in charge of the scaling and blending of the various planes into a single pixel stream. There is a special "pre-blending" used by the video planes with a dedicated scaler and a "post-blending" to merge with the OSD Planes. The OSD planes also have a dedicated scaler for one of the OSD. VENC: Video Encoders -------------------- The VENC is composed of the multiple pixel encoders : - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - ENCP : Progressive Video Encoder for HDMI - ENCL : LCD LVDS Encoder The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock tree and provides the scanout clock to the VPP and VIU. The ENCI is connected to a single VDAC for Composite Output. The ENCI and ENCP are connected to an on-chip HDMI Transceiver. This driver is a DRM/KMS driver using the following DRM components : - GEM-CMA - PRIME-CMA - Atomic Modesetting - FBDev-CMA For the following SoCs : - GXBB Family (S905) - GXL Family (S905X, S905D) - GXM Family (S912) The current driver only supports the CVBS PAL/NTSC output modes, but the CRTC/Planes management should support bigger modes. But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in a second time. The Device Tree bindings makes use of the endpoints video interface definitions to connect to the optional CVBS and in the future the HDMI Connector nodes. HDMI Support is planned for a next release. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-10 22:29:37 +08:00
obj-$(CONFIG_DRM_MESON) += meson/
drm/nouveau: Add DRM driver for NVIDIA GPUs This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA. This driver is a KMS-based driver and requires a compatible nouveau userspace libdrm and nouveau X.org driver. This driver requires firmware files not available in this kernel tree, interested parties can find them via the nouveau project git archive. This driver is reverse engineered, and is in no way supported by nVidia. Support for nearly the complete range of nvidia hw from nv04->g80 (nv50) is available, and the kms driver should support driving nearly all output types (displayport is under development still) along with supporting suspend/resume. This work is all from the upstream nouveau project found at nouveau.freedesktop.org. The original authors list from nouveau git tree is: Anssi Hannula <anssi.hannula@iki.fi> Ben Skeggs <bskeggs@redhat.com> Francisco Jerez <currojerez@riseup.net> Maarten Maathuis <madman2003@gmail.com> Marcin Kościelnicki <koriakin@0x04.net> Matthew Garrett <mjg@redhat.com> Matt Parnell <mparnell@gmail.com> Patrice Mandin <patmandin@gmail.com> Pekka Paalanen <pq@iki.fi> Xavier Chantry <shiningxc@gmail.com> along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 17:24:15 +08:00
obj-y += i2c/
drm/panel: Add simple panel support Add a driver for simple panels. Such panels can have a regulator that provides the supply voltage and a separate GPIO to enable the panel. Optionally the panels can have a backlight associated with them so it can be enabled or disabled according to the panel's power management mode. Support is added for two panels: An AU Optronics 10.1" WSVGA and a Chunghwa Picture Tubes 10.1" WXGA panel. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-30 21:10:14 +08:00
obj-y += panel/
drm/bridge: Add PTN3460 bridge driver This patch adds a drm_bridge driver for the PTN3460 DisplayPort to LVDS bridge chip. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-02-24 18:31:24 +08:00
obj-y += bridge/
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/
drm/etnaviv: add initial etnaviv DRM driver This adds the etnaviv DRM driver and hooks it up in Makefiles and Kconfig. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-04 01:21:29 +08:00
obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
drm/hisilicon: Add hisilicon kirin drm master driver Add kirin DRM master driver for hi6220 SoC which used in HiKey board. Add dumb buffer feature. Add prime dmabuf feature. v9: Add OF and ARM64 depends on in Kconfig v8: None. v7: - Add config.mutex protection when accessing mode_config.connector_list. - Clean up match data getting. v6: None. v5: None. v4: None. v3: - Move and rename all the files to kirin sub-directory. So that we could separate different seires SoCs' driver. - Replace drm_platform_init, load, unload implementation. v2: - Remove abtraction layer. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
2015-10-09 18:00:56 +08:00
obj-y += hisilicon/
drm: lcdif: Add support for i.MX8MP LCDIF variant Add support for i.MX8MP LCDIF variant. This is called LCDIFv3 and is completely different from the LCDIFv3 found in i.MX23 in that it has a completely scrambled register layout compared to all previous LCDIF variants. The new LCDIFv3 also supports 36bit address space. Add a separate driver which is really a fork of MXSFB driver with the i.MX8MP LCDIF variant handling filled in. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220628174152.167284-2-marex@denx.de
2022-06-29 01:41:52 +08:00
obj-y += mxsfb/
drm/tinydrm: Rename folder to tiny The drm in tinydrm is superfluous so rename to tiny. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-3-noralf@tronnes.org
2019-07-25 18:51:31 +08:00
obj-y += tiny/
drm/pl111: Initial drm/kms driver for pl111 This is a modesetting driver for the pl111 CLCD display controller found on various ARM platforms such as the Versatile Express. The driver has only been tested on the bcm911360_entphn platform so far, with PRIME-based buffer sharing between vc4 and clcd. It reuses the existing devicetree binding, while not using quite as many of its properties as the fbdev driver does (those are left for future work). v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks to DRM core's excellent new helpers. v3: Don't match pl110 any more, don't attach if we don't have a DRM panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple display helper, use drm_gem_cma_dumb_create (same as our wrapper). v4: Change the driver's .name to not clash with fbdev in sysfs, drop platform alias, drop redundant "drm" in DRM driver name, hook up .prepare_fb to the CMA helper so that DMA fences should work. v5: Move register definitions inside the driver directory, fix build in COMPILE_TEST and !AMBA mode. v6: Drop TIM2_CLKSEL for now to be consistent with existing DT bindings, switch back to external register definitions. Signed-off-by: Tom Cooksey <tom.cooksey@arm.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5) Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 11:17:46 +08:00
obj-$(CONFIG_DRM_PL111) += pl111/
drm/tve200: Add new driver for TVE200 This adds a new DRM driver for the Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. I do not have definitive word from anyone at Faraday that this IP block is theirs, but it bears the hallmark of their 3-digit version code (200) and is used in two SoCs from completely different companies. (Grain Media was fully owned by Faraday until it was transferred to NovoTek this january, and Faraday did lots of work on the StorLink SoCs.) The D-Link DIR-685 uses this in connection with the Ilitek ILI9322 panel driver that supports BT.656 input, while the GM8180 apparently has been used with the Cirrus Logic CS4954 digital video encoder. The oldest user seems to be something called Techwall 2835. This driver is heavily inspired by Eric Anholt's PL111 driver and therefore I have mentioned all the ancestor authors in the header file. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170820100557.24991-2-linus.walleij@linaro.org
2017-08-20 18:05:55 +08:00
obj-$(CONFIG_DRM_TVE200) += tve200/
drm/xen-front: Add support for Xen PV display frontend Add support for Xen para-virtualized frontend display driver. Accompanying backend [1] is implemented as a user-space application and its helper library [2], capable of running as a Weston client or DRM master. Configuration of both backend and frontend is done via Xen guest domain configuration options [3]. Driver limitations: 1. Only primary plane without additional properties is supported. 2. Only one video mode supported which resolution is configured via XenStore. 3. All CRTCs operate at fixed frequency of 60Hz. 1. Implement Xen bus state machine for the frontend driver according to the state diagram and recovery flow from display para-virtualized protocol: xen/interface/io/displif.h. 2. Read configuration values from Xen store according to xen/interface/io/displif.h protocol: - read connector(s) configuration - read buffer allocation mode (backend/frontend) 3. Handle Xen event channels: - create for all configured connectors and publish corresponding ring references and event channels in Xen store, so backend can connect - implement event channels interrupt handlers - create and destroy event channels with respect to Xen bus state 4. Implement shared buffer handling according to the para-virtualized display device protocol at xen/interface/io/displif.h: - handle page directories according to displif protocol: - allocate and share page directories - grant references to the required set of pages for the page directory - allocate xen balllooned pages via Xen balloon driver with alloc_xenballooned_pages/free_xenballooned_pages - grant references to the required set of pages for the shared buffer itself - implement pages map/unmap for the buffers allocated by the backend (gnttab_map_refs/gnttab_unmap_refs) 5. Implement kernel modesetiing/connector handling using DRM simple KMS helper pipeline: - implement KMS part of the driver with the help of DRM simple pipepline helper which is possible due to the fact that the para-virtualized driver only supports a single (primary) plane: - initialize connectors according to XenStore configuration - handle frame done events from the backend - create and destroy frame buffers and propagate those to the backend - propagate set/reset mode configuration to the backend on display enable/disable callbacks - send page flip request to the backend and implement logic for reporting backend IO errors on prepare fb callback - implement virtual connector handling: - support only pixel formats suitable for single plane modes - make sure the connector is always connected - support a single video mode as per para-virtualized driver configuration 6. Implement GEM handling depending on driver mode of operation: depending on the requirements for the para-virtualized environment, namely requirements dictated by the accompanying DRM/(v)GPU drivers running in both host and guest environments, number of operating modes of para-virtualized display driver are supported: - display buffers can be allocated by either frontend driver or backend - display buffers can be allocated to be contiguous in memory or not Note! Frontend driver itself has no dependency on contiguous memory for its operation. 6.1. Buffers allocated by the frontend driver. The below modes of operation are configured at compile-time via frontend driver's kernel configuration. 6.1.1. Front driver configured to use GEM CMA helpers This use-case is useful when used with accompanying DRM/vGPU driver in guest domain which was designed to only work with contiguous buffers, e.g. DRM driver based on GEM CMA helpers: such drivers can only import contiguous PRIME buffers, thus requiring frontend driver to provide such. In order to implement this mode of operation para-virtualized frontend driver can be configured to use GEM CMA helpers. 6.1.2. Front driver doesn't use GEM CMA If accompanying drivers can cope with non-contiguous memory then, to lower pressure on CMA subsystem of the kernel, driver can allocate buffers from system memory. Note! If used with accompanying DRM/(v)GPU drivers this mode of operation may require IOMMU support on the platform, so accompanying DRM/vGPU hardware can still reach display buffer memory while importing PRIME buffers from the frontend driver. 6.2. Buffers allocated by the backend This mode of operation is run-time configured via guest domain configuration through XenStore entries. For systems which do not provide IOMMU support, but having specific requirements for display buffers it is possible to allocate such buffers at backend side and share those with the frontend. For example, if host domain is 1:1 mapped and has DRM/GPU hardware expecting physically contiguous memory, this allows implementing zero-copying use-cases. Note, while using this scenario the following should be considered: a) If guest domain dies then pages/grants received from the backend cannot be claimed back b) Misbehaving guest may send too many requests to the backend exhausting its grant references and memory (consider this from security POV). Note! Configuration options 1.1 (contiguous display buffers) and 2 (backend allocated buffers) are not supported at the same time. 7. Handle communication with the backend: - send requests and wait for the responses according to the displif protocol - serialize access to the communication channel - time-out used for backend communication is set to 3000 ms - manage display buffers shared with the backend [1] https://github.com/xen-troops/displ_be [2] https://github.com/xen-troops/libxenbe [3] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/man/xl.cfg.pod.5.in;h=a699367779e2ae1212ff8f638eff0206ec1a1cc9;hb=refs/heads/master#l1257 Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180403112317.28751-2-andr2000@gmail.com
2018-04-03 19:23:17 +08:00
obj-$(CONFIG_DRM_XEN) += xen/
drm/vboxvideo: Move the vboxvideo driver out of staging The vboxvideo driver has been converted to the atomic modesetting API and all FIXME and TODO items have been fixed, so it is time to move it out of staging. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190304164724.10210-4-hdegoede@redhat.com
2019-03-05 00:47:24 +08:00
obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/
drm/lima: driver for ARM Mali4xx GPUs - Mali 4xx GPUs have two kinds of processors GP and PP. GP is for OpenGL vertex shader processing and PP is for fragment shader processing. Each processor has its own MMU so prcessors work in virtual address space. - There's only one GP but multiple PP (max 4 for mali 400 and 8 for mali 450) in the same mali 4xx GPU. All PPs are grouped togather to handle a single fragment shader task divided by FB output tiled pixels. Mali 400 user space driver is responsible for assign target tiled pixels to each PP, but mali 450 has a HW module called DLBU to dynamically balance each PP's load. - User space driver allocate buffer object and map into GPU virtual address space, upload command stream and draw data with CPU mmap of the buffer object, then submit task to GP/PP with a register frame indicating where is the command stream and misc settings. - There's no command stream validation/relocation due to each user process has its own GPU virtual address space. GP/PP's MMU switch virtual address space before running two tasks from different user process. Error or evil user space code just get MMU fault or GP/PP error IRQ, then the HW/SW will be recovered. - Use GEM+shmem for MM. Currently just alloc and pin memory when gem object creation. GPU vm map of the buffer is also done in the alloc stage in kernel space. We may delay the memory allocation and real GPU vm map to command submission stage in the furture as improvement. - Use drm_sched for GPU task schedule. Each OpenGL context should have a lima context object in the kernel to distinguish tasks from different user. drm_sched gets task from each lima context in a fair way. mesa driver can be found here before upstreamed: https://gitlab.freedesktop.org/lima/mesa v8: - add comments for in_sync - fix ctx free miss mutex unlock v7: - remove lima_fence_ops with default value - move fence slab create to device probe - check pad ioctl args to be zero - add comments for user/kernel interface v6: - fix comments by checkpatch.pl v5: - export gp/pp version to userspace - rebase on drm-misc-next v4: - use get param interface to get info - separate context create/free ioctl - remove unused max sched task param - update copyright time - use xarray instead of idr - stop using drmP.h v3: - fix comments from kbuild robot - restrict supported arch to tested ones v2: - fix syscall argument check - fix job finish fence leak since kernel 5.0 - use drm syncobj to replace native fence - move buffer object GPU va map into kernel - reserve syscall argument space for future info - remove kernel gem modifier - switch TTM back to GEM+shmem MM - use time based io poll - use whole register name - adopt gem reservation obj integration - use drm_timeout_abs_to_jiffies Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh@kernel.org> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de> Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Rob Herring <robh@kerrnel.org> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/291200/
2019-03-09 20:20:12 +08:00
obj-$(CONFIG_DRM_LIMA) += lima/
drm/panfrost: Add initial panfrost driver This adds the initial driver for panfrost which supports Arm Mali Midgard and Bifrost family of GPUs. Currently, only the T860 and T760 Midgard GPUs have been tested. v2: - Add GPU reset on job hangs (Tomeu) - Add RuntimePM and devfreq support (Tomeu) - Fix T760 support (Tomeu) - Add a TODO file (Rob, Tomeu) - Support multiple in fences (Tomeu) - Drop support for shared fences (Tomeu) - Fill in MMU de-init (Rob) - Move register definitions back to single header (Rob) - Clean-up hardcoded job submit todos (Rob) - Implement feature setup based on features/issues (Rob) - Add remaining Midgard DT compatible strings (Rob) v3: - Add support for reset lines (Neil) - Add a MAINTAINERS entry (Rob) - Call dma_set_mask_and_coherent (Rob) - Do MMU invalidate on map and unmap. Restructure to do a single operation per map/unmap call. (Rob) - Add a missing explicit padding to struct drm_panfrost_create_bo (Rob) - Fix 0-day error: "panfrost_devfreq.c:151:9-16: ERROR: PTR_ERR applied after initialization to constant on line 150" - Drop HW_FEATURE_AARCH64_MMU conditional (Rob) - s/DRM_PANFROST_PARAM_GPU_ID/DRM_PANFROST_PARAM_GPU_PROD_ID/ (Rob) - Check drm_gem_shmem_prime_import_sg_table() error code (Rob) - Re-order power on sequence (Rob) - Move panfrost_acquire_object_fences() before scheduling job (Rob) - Add NULL checks on array pointers in job clean-up (Rob) - Rework devfreq (Tomeu) - Fix devfreq init with no regulator (Rob) - Various WS and comments clean-up (Rob) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-4-robh@kernel.org
2018-09-11 03:27:58 +08:00
obj-$(CONFIG_DRM_PANFROST) += panfrost/
drm: Add ASPEED GFX driver This driver is for the ASPEED BMC SoC's GFX display hardware. This driver runs on the ARM based BMC systems, unlike the ast driver which runs on a host CPU and is is for a PCI graphics device. Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190403001909.31637-3-joel@jms.id.au
2019-04-03 08:19:08 +08:00
obj-$(CONFIG_DRM_ASPEED_GFX) += aspeed/
drm/mcde: Add new driver for ST-Ericsson MCDE This adds a new DRM driver for the ST-Ericsson Multi Channel Display Engine, MCDE display controller. This hardware has three independent DSI hosts and can composit and display several memory buffers onto an LCD display. It was developed for several years inside of ST-Ericsson and shipped with a few million mobile phones from Sony and Samsung, as well as with the Snowball community development board. The driver is currently pretty rudimentary but supports a simple framebuffer so we can get penguins and graphics when using these SoCs. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190524092019.19355-1-linus.walleij@linaro.org
2019-05-24 17:20:19 +08:00
obj-$(CONFIG_DRM_MCDE) += mcde/
drm/tidss: New driver for TI Keystone platform Display SubSystem This patch adds a new DRM driver for Texas Instruments DSS IPs used on Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is a major change to the older DSS IP versions, which are supported by the omapdrm driver. While on higher level the Keystone DSS resembles the older DSS versions, the registers are completely different and the internal pipelines differ a lot. DSS IP found on K2G is an "ultra-light" version, and has only a single plane and a single output. The K3 DSS IPs are found on AM65x and J721E SoCs. AM65x DSS has two video ports, one full video plane, and another "lite" plane without scaling support. J721E has 4 video ports, 2 video planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS) output. Version history: v2: - rebased on top of drm-next-2019-11-27 - sort all include lines in all files - remove all include <drm/drmP.h> - remove select "select VIDEOMODE_HELPERS" - call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no to call it in new modeset case as it is also called in vp_enable()) - change probe sequence and drm_device allocation (follow example in drm_drv.c) - use __maybe_unused instead of #ifdef for pm functions - remove "struct drm_fbdev_cma *fbdev;" from driver data - check panel connector type before connecting it v3: no change v4: no change v5: - remove fifo underflow irq handling, it is not an error and it should be used for debug purposes only - memory tuning, prefetch plane fifo up to high-threshold value to minimize possibility of underflows. v6: - Check CTM and gamma support from dispc_features when creating crtc - Implement CTM support for k2g and fix k3 CTM implementation - Remove gamma property persistence and always write color properties in a new modeset v7: - Fix checkpatch.pl --strict issues - Rebase on top of drm-misc-next-2020-01-10 v8: - Remove idle debug prints from dispc_init() - Add Reviewed-by: Benoit Parrot <bparrot@ti.com> v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid conflict exported omapfb function with same name - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com
2019-11-08 15:45:28 +08:00
obj-$(CONFIG_DRM_TIDSS) += tidss/
drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem The Xilinx ZynqMP SoC has a hardened display pipeline named DisplayPort Subsystem. It includes a buffer manager, a video pipeline renderer (blender), an audio mixer and a DisplayPort source controller (transmitter). The DMA engine the provide data to the buffer manager, as well as the DisplayPort PHYs that drive the lanes, are external to the subsystem and interfaced using the DMA engine and PHY APIs respectively. This driver supports the DisplayPort Subsystem and implements - Two planes, for graphics and video - One CRTC that supports alpha blending - One encoder for the DisplayPort transmitter - One connector for an external monitor It currently doesn't support - Color keying - Test pattern generation - Audio - Live input from the Programmable Logic (FPGA) - Output to the Programmable Logic (FPGA) Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-07-08 10:05:34 +08:00
obj-y += xlnx/
drm: Add GUD USB Display driver This adds a USB display driver with the intention that it can be used with future USB interfaced low end displays/adapters. The Linux gadget device driver will serve as the canonical device implementation. The following DRM properties are supported: - Plane rotation - Connector TV properties There is also support for backlight brightness exposed as a backlight device. Display modes can be made available to the host driver either as DRM display modes or through EDID. If both are present, EDID is just passed on to userspace. Performance is preferred over color depth, so if the device supports RGB565, DRM_CAP_DUMB_PREFERRED_DEPTH will return 16. If the device transfer buffer can't fit an uncompressed framebuffer update, the update is split up into parts that do fit. Optimal user experience is achieved by providing damage reports either by setting FB_DAMAGE_CLIPS on pageflips or calling DRM_IOCTL_MODE_DIRTYFB. LZ4 compression is used if the device supports it. The driver supports a one bit monochrome transfer format: R1. This is not implemented in the gadget driver. It is added in preparation for future monochrome e-ink displays. The driver is MIT licensed to smooth the path for any BSD port of the driver. v2: - Use devm_drm_dev_alloc() and drmm_mode_config_init() - drm_fbdev_generic_setup: Use preferred_bpp=0, 16 was a copy paste error - The drm_backlight_helper is dropped, copy in the code - Support protocol version backwards compatibility for device v3: - Use donated Openmoko USB pid - Use direct compression from framebuffer when pitch matches, not only on full frames, so split updates can benefit - Use __le16 in struct gud_drm_req_get_connector_status - Set edid property when the device only provides edid - Clear compression fields in struct gud_drm_req_set_buffer - Fix protocol version negotiation - Remove mode->vrefresh, it's calculated v4: - Drop the status req polling which was a workaround for something that turned out to be a dwc2 udc driver problem - Add a flag for the Linux gadget to require a status request on SET operations. Other devices will only get status req on STALL errors - Use protocol specific error codes (Peter) - Add a flag for devices that want to receive the entire framebuffer on each flush (Lubomir) - Retry a failed framebuffer flush - If mode has changed wait for worker and clear pending damage before queuing up new damage, fb width/height might have changed - Increase error counter on bulk transfer failures - Use DRM_MODE_CONNECTOR_USB - Handle R1 kmalloc error (Peter) - Don't try and replicate the USB get descriptor request standard for the display descriptor (Peter) - Make max_buffer_size optional (Peter), drop the pow2 requirement since it's not necessary anymore. - Don't pre-alloc a control request buffer, it was only 4k - Let gud.h describe the whole protocol explicitly and don't let DRM leak into it (Peter) - Drop display mode .hskew and .vscan from the protocol - Shorten names: s/GUD_DRM_/GUD_/ s/gud_drm_/gud_/ (Peter) - Fix gud_pipe_check() connector picking when switching connector - Drop gud_drm_driver_gem_create_object() cached is default now - Retrieve USB device from struct drm_device.dev instead of keeping a pointer - Honour fb->offsets[0] - Fix mode fetching when connector status is forced - Check EDID length reported by the device - Use drm_do_get_edid() so userspace can overrride EDID - Set epoch counter to signal connector status change - gud_drm_driver can be const now v5: - GUD_DRM_FORMAT_R1: Use non-human ascii values (Daniel) - Change name to: GUD USB Display (Thomas, Simon) - Change one __u32 -> __le32 in protocol header - Always log fb flush errors, unless the previous one failed - Run backlight update in a worker to avoid upsetting lockdep (Daniel) - Drop backlight_ops.get_brightness, there's no readback from the device so it doesn't really add anything. - Set dma mask, needed by dma-buf importers v6: - Use obj-y in Makefile (Peter) - Fix missing le32_to_cpu() when using GUD_DISPLAY_MAGIC (Peter) - Set initial brightness on backlight device v7: - LZ4_compress_default() can return zero, check for that - Fix memory leak in gud_pipe_check() error path (Peter) - Improve debug and error messages (Peter) - Don't pass length in protocol structs (Peter) - Pass USB interface to gud_usb_control_msg() et al. (Peter) - Improve gud_connector_fill_properties() (Peter) - Add GUD_PIXEL_FORMAT_RGB111 (Peter) - Remove GUD_REQ_SET_VERSION (Peter) - Fix DRM_IOCTL_MODE_OBJ_SETPROPERTY and the rotation property - Fix dma-buf import (Thomas) v8: - Forgot to filter RGB111 from reaching userspace - Handle a device that only returns unknown device properties (Peter) - s/GUD_PIXEL_FORMAT_RGB111/GUD_PIXEL_FORMAT_XRGB1111/ (Peter) - Fix R1 and XRGB1111 format conversion - Add FIXME about Big Endian being broken (Peter, Ilia) Cc: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: Peter Stuge <peter@stuge.se> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210313112545.37527-4-noralf@tronnes.org
2021-03-13 19:25:45 +08:00
obj-y += gud/
drm/hyperv: Add DRM driver for hyperv synthetic video device DRM driver for hyperv synthetic video device, based on hyperv_fb framebuffer driver. Also added config option "DRM_HYPERV" to enabled this driver. v2: - Add support for gen2 VM - Fixed review comments v3: - Split into multiple files as suggested by Thomas Zimmermann - Fixed hibernation issue as suggested by Dexuan Cui - Use ioremap_cache as suggested by Dexuan Cui - Incorporated other review comments v4: - Fix bitrotted code - Review comments - Updated the copyright and license to match hyperv_fb v5: - Address review comments and rebased with drm-misc-next v6: - Minor code/comment improvement as suggested by Dexuan Cui Signed-off-by: Deepak Rawat <drawat.floss@gmail.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210527112230.1274-1-drawat.floss@gmail.com
2021-05-27 19:22:28 +08:00
obj-$(CONFIG_DRM_HYPERV) += hyperv/
drm: Add driver for Solomon SSD130x OLED displays This adds a DRM driver for SSD1305, SSD1306, SSD1307 and SSD1309 Solomon OLED display controllers. It's only the core part of the driver and a bus specific driver is needed for each transport interface supported by the display controllers. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220214133710.3278506-4-javierm@redhat.com
2022-02-14 21:37:07 +08:00
obj-y += solomon/
drm/sprd: add Unisoc's drm kms master Adds drm support for the Unisoc's display subsystem. This is drm kms driver, this driver provides support for the application framework in Android, Yocto and more. Application framework can access Unisoc's display internal peripherals through libdrm or libkms, it's test ok by modetest (DRM/KMS test tool) and Android HWComposer. v4: - Move the devm_drm_dev_alloc to master_ops->bind function. - The managed drmm_mode_config_init() it is no longer necessary for drivers to explicitly call drm_mode_config_cleanup, so delete it. v5: - Remove subdir-ccflgas-y for Makefile. - Keep the selects sorted by alphabet for Kconfig. Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Kevin Tang <kevin.tang@unisoc.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211207142717.30296-3-kevin3.tang@gmail.com
2021-12-07 22:27:13 +08:00
obj-$(CONFIG_DRM_SPRD) += sprd/
drm: Add kms driver for loongson display controller Loongson display controller IP has been integrated in both Loongson north bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000). It has even been included in Loongson's BMC products. It has two display pipes, and each display pipe supports a primary plane and a cursor plane. For the DC in the LS7a1000, each display pipe has a DVO output interface, which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each display pipe is equipped with a built-in HDMI encoder, which is compliant with the HDMI 1.4 specification. The first display pipe is also equipped with a transparent VGA encoder, which is parallel with the HDMI encoder. To get a decent performance for writing framebuffer data to the VRAM, the write combine support should be enabled. v1 -> v2: 1) Use hpd status reg when polling for ls7a2000. 2) Fix all warnings that emerged when compiling with W=1. v2 -> v3: 1) Add COMPILE_TEST to Kconfig and make the driver off by default 2) Alphabetical sorting headers (Thomas) 3) Untangle register access functions as much as possible (Thomas) 4) Switch to TTM-based memory manager (Thomas) 5) Add the chip ID detection function which can be used to distinguish chip models 6) Revise the built-in HDMI phy driver, nearly all main stream mode below 4K@30Hz is tested, and this driver supports clone(mirror) display mode and extend(joint) display mode. v3 -> v4: 1) Quickly fix a small mistake. v4 -> v5: 1) Add per display pipe debugfs support to the builtin HDMI encoder. v5 -> v6: 1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram 2) Fix all typos I could found, make sentences and code more readable 3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe 4) Rename this driver as loongson. v6 -> v7: 1) Add prime support for buffer self-sharing, sharing buffer with drm/etnaviv is also tested and it works with limitations. 2) Implement buffer object tracking with list_head. 3) Add S3(sleep to RAM) support 4) Rewrite lsdc_bo_move since TTM core stop allocating resources     during BO creation. Patch V1 ~ V6 of this series no longer work.     Thus, we send V7. v7 -> v8:  1) Zero a compile warning on a 32-bit platform, compile with W=1  2) Revise lsdc_bo_gpu_offset() and make minor cleanups.  3) Pageflip tested on the virtual terminal with the following commands: modetest -M loongson -s 32:1920x1080 -v modetest -M loongson -s 34:1920x1080 -v -F tiles It works like a charm, when running the pageflip test with dual screens configuration, another two additional BOs were created by the modetest, VRAM usage up to 40+ MB, well we have at least 64MB, still enough. # cat bos bo[0000]: size: 8112kB VRAM bo[0001]: size: 16kB VRAM bo[0002]: size: 16kB VRAM bo[0003]: size: 16208kB VRAM bo[0004]: size: 8112kB VRAM bo[0005]: size: 8112kB VRAM v8 -> v9: 1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU. 2) Using pci_get_domain_bus_and_slot to get the GPU device. v9 -> v10: 1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that the pinned BO could not be moved, the VRAM lost power when sleeping to RAM. Thus, the data in the buffer who is pinned in VRAM will get lost when resumed. Yet it's not a big problem because this driver relies on the CPU to update the front framebuffer. We can see the garbage data when resume from S3, but the screen will show the right image as I move the cursor. This is due to the CPU repaint. v10 of this patch makes S3 perfect by unpin all of the BOs in VRAM, evict them all to system RAM in lsdc_drm_freeze(). v10 -> v11: 1) On a double-screen case, The buffer object backing the single giant framebuffer is referenced by two GEM objects; hence, it will be pinned at least twice by prepare_fb() function. This causes its pin count > 1. V10 of this patch only unpins VRAM BOs once when suspend, which is not correct on double-screen case. V11 of this patch unpin the BOs until its pin count reaches zero when suspend. Then, we make the S3 support complete finally. With v11, I can't see any garbage data when resume. 2) Fix vblank wait timeout when disable CRTC. 3) Test against IGT, at least fbdev test and kms_flip test passed. 4) Rewrite pixel PLL update function, magic numbers eliminated (Emil) 5) Drop a few common hardware features description in lsdc_desc (Emil) 6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb create function. (Emil) 7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas) v11 -> v12: none v12 -> v13: 1) Add benchmarks to figure out the bandwidth of the hardware platform. Usage: # cd /sys/kernel/debug/dri/0/ # cat benchmark 2) VRAM is filled with garbage data if uninitialized, add a buffer clearing procedure (lsdc_bo_clear), clear the BO on creation time. 3) Update copyrights and adjust coding style (Huacai) v13 -> v14: 1) Trying to add async update support for cursor plane. v14 -> v15: 1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv co-exist in the system, more is also possible (Emil and Xuerui) 2) Fix typos and grammar mistakes as much as possible (Xuerui) 3) Unify copyrights as GPL-2.0+ (Xuerui) 4) Fix a bug introduce since V13, TTM may import BO from other drivers, we shouldn't clear it on such a case. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: loongson-kernel@lists.loongnix.cn Tested-by: Liu Peibao <liupeibao@loongson.cn> Tested-by: Li Yi  <liyi@loongson.cn> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn
2023-06-15 22:36:12 +08:00
obj-$(CONFIG_DRM_LOONGSON) += loongson/
drm/imagination: Add skeleton PowerVR driver This adds the basic skeleton of the driver. The driver registers itself with DRM on probe. Ioctl handlers are currently implemented as stubs. Changes since v8: - Corrected license identifiers Changes since v5: - Update compatible string & description to match marketing name - Checkpatch fixes in to/from_pvr_device/file macros Changes since v3: - Clarify supported GPU generations in driver description - Use drm_dev_unplug() when removing device - Change from_* and to_* functions to macros - Fix IS_PTR/PTR_ERR confusion in pvr_probe() - Remove err_out labels in favour of direct returning - Remove specific am62 compatible match string - Drop MODULE_FIRMWARE() Co-developed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Frank Binns <frank.binns@imgtec.com> Co-developed-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/fed8a77e29620a61aed2684f802339759082cf1b.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23 00:34:26 +08:00
obj-$(CONFIG_DRM_POWERVR) += imagination/
Reference in New Issue Copy Permalink