linux/drivers/regulator/pfuze100-regulator.c

858 lines
26 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
//
// Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/of_regulator.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/pfuze100.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/regmap.h>
#define PFUZE_FLAG_DISABLE_SW BIT(1)
#define PFUZE_NUMREGS 128
#define PFUZE100_VOL_OFFSET 0
#define PFUZE100_STANDBY_OFFSET 1
#define PFUZE100_MODE_OFFSET 3
#define PFUZE100_CONF_OFFSET 4
#define PFUZE100_DEVICEID 0x0
#define PFUZE100_REVID 0x3
#define PFUZE100_FABID 0x4
#define PFUZE100_COINVOL 0x1a
#define PFUZE100_SW1ABVOL 0x20
#define PFUZE100_SW1ABMODE 0x23
#define PFUZE100_SW1CVOL 0x2e
#define PFUZE100_SW1CMODE 0x31
#define PFUZE100_SW2VOL 0x35
#define PFUZE100_SW2MODE 0x38
#define PFUZE100_SW3AVOL 0x3c
#define PFUZE100_SW3AMODE 0x3f
#define PFUZE100_SW3BVOL 0x43
#define PFUZE100_SW3BMODE 0x46
#define PFUZE100_SW4VOL 0x4a
#define PFUZE100_SW4MODE 0x4d
#define PFUZE100_SWBSTCON1 0x66
#define PFUZE100_VREFDDRCON 0x6a
#define PFUZE100_VSNVSVOL 0x6b
#define PFUZE100_VGEN1VOL 0x6c
#define PFUZE100_VGEN2VOL 0x6d
#define PFUZE100_VGEN3VOL 0x6e
#define PFUZE100_VGEN4VOL 0x6f
#define PFUZE100_VGEN5VOL 0x70
#define PFUZE100_VGEN6VOL 0x71
#define PFUZE100_SWxMODE_MASK 0xf
#define PFUZE100_SWxMODE_APS_APS 0x8
#define PFUZE100_SWxMODE_APS_OFF 0x4
#define PFUZE100_VGENxLPWR BIT(6)
#define PFUZE100_VGENxSTBY BIT(5)
enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3, PFUZE3001 = 0x31, };
struct pfuze_regulator {
struct regulator_desc desc;
unsigned char stby_reg;
unsigned char stby_mask;
bool sw_reg;
};
struct pfuze_chip {
int chip_id;
int flags;
struct regmap *regmap;
struct device *dev;
struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR];
struct pfuze_regulator *pfuze_regulators;
};
static const int pfuze100_swbst[] = {
5000000, 5050000, 5100000, 5150000,
};
static const int pfuze100_vsnvs[] = {
1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
};
static const int pfuze100_coin[] = {
2500000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
};
static const int pfuze3000_sw1a[] = {
700000, 725000, 750000, 775000, 800000, 825000, 850000, 875000,
900000, 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000,
1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000,
1300000, 1325000, 1350000, 1375000, 1400000, 1425000, 1800000, 3300000,
};
static const int pfuze3000_sw2lo[] = {
1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000,
};
static const int pfuze3000_sw2hi[] = {
2500000, 2800000, 2850000, 3000000, 3100000, 3150000, 3200000, 3300000,
};
static const struct of_device_id pfuze_dt_ids[] = {
{ .compatible = "fsl,pfuze100", .data = (void *)PFUZE100},
{ .compatible = "fsl,pfuze200", .data = (void *)PFUZE200},
{ .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000},
{ .compatible = "fsl,pfuze3001", .data = (void *)PFUZE3001},
{ }
};
MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
bool reg_has_ramp_delay;
unsigned int ramp_bits = 0;
int ret;
switch (pfuze100->chip_id) {
case PFUZE3001:
/* no dynamic voltage scaling for PF3001 */
reg_has_ramp_delay = false;
break;
case PFUZE3000:
reg_has_ramp_delay = (id < PFUZE3000_SWBST);
break;
case PFUZE200:
reg_has_ramp_delay = (id < PFUZE200_SWBST);
break;
case PFUZE100:
default:
reg_has_ramp_delay = (id < PFUZE100_SWBST);
break;
}
if (reg_has_ramp_delay) {
if (ramp_delay > 0) {
ramp_delay = 12500 / ramp_delay;
ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
}
ret = regmap_update_bits(pfuze100->regmap,
rdev->desc->vsel_reg + 4,
0xc0, ramp_bits << 6);
if (ret < 0)
dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
} else {
ret = -EACCES;
}
return ret;
}
static const struct regulator_ops pfuze100_ldo_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
static const struct regulator_ops pfuze100_fixed_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
};
static const struct regulator_ops pfuze100_sw_regulator_ops = {
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = pfuze100_set_ramp_delay,
};
static const struct regulator_ops pfuze100_sw_disable_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = pfuze100_set_ramp_delay,
};
static const struct regulator_ops pfuze100_swb_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
static const struct regulator_ops pfuze3000_sw_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = pfuze100_set_ramp_delay,
};
#define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \
[_chip ## _ ## _name] = { \
.desc = { \
.name = #_name, \
.n_voltages = 1, \
.ops = &pfuze100_fixed_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.min_uV = (voltage), \
.enable_reg = (base), \
.enable_mask = 0x10, \
}, \
}
#define PFUZE100_SW_REG(_chip, _name, base, min, max, step) \
[_chip ## _ ## _name] = { \
.desc = { \
.name = #_name,\
.n_voltages = ((max) - (min)) / (step) + 1, \
.ops = &pfuze100_sw_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.min_uV = (min), \
.uV_step = (step), \
.vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
.vsel_mask = 0x3f, \
.enable_reg = (base) + PFUZE100_MODE_OFFSET, \
.enable_mask = 0xf, \
}, \
.stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
.stby_mask = 0x3f, \
.sw_reg = true, \
}
#define PFUZE100_SWB_REG(_chip, _name, base, mask, voltages) \
[_chip ## _ ## _name] = { \
.desc = { \
.name = #_name, \
.n_voltages = ARRAY_SIZE(voltages), \
.ops = &pfuze100_swb_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.volt_table = voltages, \
.vsel_reg = (base), \
.vsel_mask = (mask), \
.enable_reg = (base), \
.enable_mask = 0x48, \
}, \
}
#define PFUZE100_VGEN_REG(_chip, _name, base, min, max, step) \
[_chip ## _ ## _name] = { \
.desc = { \
.name = #_name, \
.n_voltages = ((max) - (min)) / (step) + 1, \
.ops = &pfuze100_ldo_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.min_uV = (min), \
.uV_step = (step), \
.vsel_reg = (base), \
.vsel_mask = 0xf, \
.enable_reg = (base), \
.enable_mask = 0x10, \
}, \
.stby_reg = (base), \
.stby_mask = 0x20, \
}
#define PFUZE100_COIN_REG(_chip, _name, base, mask, voltages) \
[_chip ## _ ## _name] = { \
.desc = { \
.name = #_name, \
.n_voltages = ARRAY_SIZE(voltages), \
.ops = &pfuze100_swb_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.volt_table = voltages, \
.vsel_reg = (base), \
.vsel_mask = (mask), \
.enable_reg = (base), \
.enable_mask = 0x8, \
}, \
}
#define PFUZE3000_VCC_REG(_chip, _name, base, min, max, step) { \
.desc = { \
.name = #_name, \
.n_voltages = ((max) - (min)) / (step) + 1, \
.ops = &pfuze100_ldo_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.min_uV = (min), \
.uV_step = (step), \
.vsel_reg = (base), \
.vsel_mask = 0x3, \
.enable_reg = (base), \
.enable_mask = 0x10, \
}, \
.stby_reg = (base), \
.stby_mask = 0x20, \
}
/* No linar case for the some switches of PFUZE3000 */
#define PFUZE3000_SW_REG(_chip, _name, base, mask, voltages) \
[_chip ## _ ## _name] = { \
.desc = { \
.name = #_name, \
.n_voltages = ARRAY_SIZE(voltages), \
.ops = &pfuze3000_sw_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.volt_table = voltages, \
.vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
.vsel_mask = (mask), \
.enable_reg = (base) + PFUZE100_MODE_OFFSET, \
.enable_mask = 0xf, \
.enable_val = 0x8, \
.enable_time = 500, \
}, \
.stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
.stby_mask = (mask), \
.sw_reg = true, \
}
#define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \
.desc = { \
.name = #_name,\
.n_voltages = ((max) - (min)) / (step) + 1, \
.ops = &pfuze100_sw_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = _chip ## _ ## _name, \
.owner = THIS_MODULE, \
.min_uV = (min), \
.uV_step = (step), \
.vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
.vsel_mask = 0xf, \
}, \
.stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
.stby_mask = 0xf, \
}
/* PFUZE100 */
static struct pfuze_regulator pfuze100_regulators[] = {
PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
PFUZE100_SW_REG(PFUZE100, SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000),
PFUZE100_SW_REG(PFUZE100, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
PFUZE100_SW_REG(PFUZE100, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
PFUZE100_SW_REG(PFUZE100, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
PFUZE100_SW_REG(PFUZE100, SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000),
PFUZE100_SWB_REG(PFUZE100, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
PFUZE100_SWB_REG(PFUZE100, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
PFUZE100_FIXED_REG(PFUZE100, VREFDDR, PFUZE100_VREFDDRCON, 750000),
PFUZE100_VGEN_REG(PFUZE100, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
PFUZE100_VGEN_REG(PFUZE100, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
PFUZE100_VGEN_REG(PFUZE100, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE100, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE100, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE100, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
PFUZE100_COIN_REG(PFUZE100, COIN, PFUZE100_COINVOL, 0x7, pfuze100_coin),
};
static struct pfuze_regulator pfuze200_regulators[] = {
PFUZE100_SW_REG(PFUZE200, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
PFUZE100_SW_REG(PFUZE200, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
PFUZE100_SW_REG(PFUZE200, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
PFUZE100_SW_REG(PFUZE200, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
PFUZE100_SWB_REG(PFUZE200, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
PFUZE100_SWB_REG(PFUZE200, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
PFUZE100_FIXED_REG(PFUZE200, VREFDDR, PFUZE100_VREFDDRCON, 750000),
PFUZE100_VGEN_REG(PFUZE200, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
PFUZE100_VGEN_REG(PFUZE200, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
PFUZE100_VGEN_REG(PFUZE200, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE200, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE200, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
PFUZE100_COIN_REG(PFUZE200, COIN, PFUZE100_COINVOL, 0x7, pfuze100_coin),
};
static struct pfuze_regulator pfuze3000_regulators[] = {
PFUZE3000_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000),
PFUZE3000_SW_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst),
PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
PFUZE100_FIXED_REG(PFUZE3000, VREFDDR, PFUZE100_VREFDDRCON, 750000),
PFUZE100_VGEN_REG(PFUZE3000, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE3000, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
PFUZE3000_VCC_REG(PFUZE3000, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000),
PFUZE3000_VCC_REG(PFUZE3000, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000),
PFUZE100_VGEN_REG(PFUZE3000, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
};
static struct pfuze_regulator pfuze3001_regulators[] = {
PFUZE3000_SW_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a),
PFUZE3000_SW_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE3001, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
PFUZE3000_VCC_REG(PFUZE3001, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000),
PFUZE3000_VCC_REG(PFUZE3001, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000),
PFUZE100_VGEN_REG(PFUZE3001, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
PFUZE100_VGEN_REG(PFUZE3001, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
};
/* PFUZE100 */
static struct of_regulator_match pfuze100_matches[] = {
{ .name = "sw1ab", },
{ .name = "sw1c", },
{ .name = "sw2", },
{ .name = "sw3a", },
{ .name = "sw3b", },
{ .name = "sw4", },
{ .name = "swbst", },
{ .name = "vsnvs", },
{ .name = "vrefddr", },
{ .name = "vgen1", },
{ .name = "vgen2", },
{ .name = "vgen3", },
{ .name = "vgen4", },
{ .name = "vgen5", },
{ .name = "vgen6", },
{ .name = "coin", },
};
/* PFUZE200 */
static struct of_regulator_match pfuze200_matches[] = {
{ .name = "sw1ab", },
{ .name = "sw2", },
{ .name = "sw3a", },
{ .name = "sw3b", },
{ .name = "swbst", },
{ .name = "vsnvs", },
{ .name = "vrefddr", },
{ .name = "vgen1", },
{ .name = "vgen2", },
{ .name = "vgen3", },
{ .name = "vgen4", },
{ .name = "vgen5", },
{ .name = "vgen6", },
{ .name = "coin", },
};
/* PFUZE3000 */
static struct of_regulator_match pfuze3000_matches[] = {
{ .name = "sw1a", },
{ .name = "sw1b", },
{ .name = "sw2", },
{ .name = "sw3", },
{ .name = "swbst", },
{ .name = "vsnvs", },
{ .name = "vrefddr", },
{ .name = "vldo1", },
{ .name = "vldo2", },
{ .name = "vccsd", },
{ .name = "v33", },
{ .name = "vldo3", },
{ .name = "vldo4", },
};
/* PFUZE3001 */
static struct of_regulator_match pfuze3001_matches[] = {
{ .name = "sw1", },
{ .name = "sw2", },
{ .name = "sw3", },
{ .name = "vsnvs", },
{ .name = "vldo1", },
{ .name = "vldo2", },
{ .name = "vccsd", },
{ .name = "v33", },
{ .name = "vldo3", },
{ .name = "vldo4", },
};
static struct of_regulator_match *pfuze_matches;
static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
{
struct device *dev = chip->dev;
struct device_node *np, *parent;
int ret;
np = of_node_get(dev->of_node);
if (!np)
return -EINVAL;
if (of_property_read_bool(np, "fsl,pfuze-support-disable-sw"))
chip->flags |= PFUZE_FLAG_DISABLE_SW;
parent = of_get_child_by_name(np, "regulators");
if (!parent) {
dev_err(dev, "regulators node not found\n");
of_node_put(np);
return -EINVAL;
}
switch (chip->chip_id) {
case PFUZE3001:
pfuze_matches = pfuze3001_matches;
ret = of_regulator_match(dev, parent, pfuze3001_matches,
ARRAY_SIZE(pfuze3001_matches));
break;
case PFUZE3000:
pfuze_matches = pfuze3000_matches;
ret = of_regulator_match(dev, parent, pfuze3000_matches,
ARRAY_SIZE(pfuze3000_matches));
break;
case PFUZE200:
pfuze_matches = pfuze200_matches;
ret = of_regulator_match(dev, parent, pfuze200_matches,
ARRAY_SIZE(pfuze200_matches));
break;
case PFUZE100:
default:
pfuze_matches = pfuze100_matches;
ret = of_regulator_match(dev, parent, pfuze100_matches,
ARRAY_SIZE(pfuze100_matches));
break;
}
of_node_put(parent);
of_node_put(np);
if (ret < 0) {
dev_err(dev, "Error parsing regulator init data: %d\n",
ret);
return ret;
}
return 0;
}
static inline struct regulator_init_data *match_init_data(int index)
{
return pfuze_matches[index].init_data;
}
static inline struct device_node *match_of_node(int index)
{
return pfuze_matches[index].of_node;
}
static int pfuze_power_off_prepare(struct sys_off_data *data)
{
struct pfuze_chip *syspm_pfuze_chip = data->cb_data;
dev_info(syspm_pfuze_chip->dev, "Configure standby mode for power off");
/* Switch from default mode: APS/APS to APS/Off */
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1ABMODE,
PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1CMODE,
PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW2MODE,
PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3AMODE,
PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3BMODE,
PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW4MODE,
PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN1VOL,
PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
PFUZE100_VGENxSTBY);
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN2VOL,
PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
PFUZE100_VGENxSTBY);
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN3VOL,
PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
PFUZE100_VGENxSTBY);
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN4VOL,
PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
PFUZE100_VGENxSTBY);
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN5VOL,
PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
PFUZE100_VGENxSTBY);
regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN6VOL,
PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
PFUZE100_VGENxSTBY);
return NOTIFY_DONE;
}
static int pfuze_power_off_prepare_init(struct pfuze_chip *pfuze_chip)
{
int err;
if (pfuze_chip->chip_id != PFUZE100) {
dev_warn(pfuze_chip->dev, "Requested pm_power_off_prepare handler for not supported chip\n");
return -ENODEV;
}
err = devm_register_sys_off_handler(pfuze_chip->dev,
SYS_OFF_MODE_POWER_OFF_PREPARE,
SYS_OFF_PRIO_DEFAULT,
pfuze_power_off_prepare,
pfuze_chip);
if (err) {
dev_err(pfuze_chip->dev, "failed to register sys-off handler: %d\n",
err);
return err;
}
return 0;
}
static int pfuze_identify(struct pfuze_chip *pfuze_chip)
{
unsigned int value;
int ret;
ret = regmap_read(pfuze_chip->regmap, PFUZE100_DEVICEID, &value);
if (ret)
return ret;
if (((value & 0x0f) == 0x8) && (pfuze_chip->chip_id == PFUZE100)) {
/*
* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013
* as ID=8 in PFUZE100
*/
dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
} else if ((value & 0x0f) != pfuze_chip->chip_id &&
(value & 0xf0) >> 4 != pfuze_chip->chip_id &&
(value != pfuze_chip->chip_id)) {
/* device id NOT match with your setting */
dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
return -ENODEV;
}
ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
if (ret)
return ret;
dev_info(pfuze_chip->dev,
"Full layer: %x, Metal layer: %x\n",
(value & 0xf0) >> 4, value & 0x0f);
ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value);
if (ret)
return ret;
dev_info(pfuze_chip->dev, "FAB: %x, FIN: %x\n",
(value & 0xc) >> 2, value & 0x3);
return 0;
}
static const struct regmap_config pfuze_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = PFUZE_NUMREGS - 1,
.cache_type = REGCACHE_RBTREE,
};
static int pfuze100_regulator_probe(struct i2c_client *client)
{
const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct pfuze_chip *pfuze_chip;
struct regulator_config config = { };
int i, ret;
const struct of_device_id *match;
u32 regulator_num;
u32 sw_check_start, sw_check_end, sw_hi = 0x40;
pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip),
GFP_KERNEL);
if (!pfuze_chip)
return -ENOMEM;
if (client->dev.of_node) {
match = of_match_device(of_match_ptr(pfuze_dt_ids),
&client->dev);
if (!match) {
dev_err(&client->dev, "Error: No device match found\n");
return -ENODEV;
}
pfuze_chip->chip_id = (int)(long)match->data;
} else if (id) {
pfuze_chip->chip_id = id->driver_data;
} else {
dev_err(&client->dev, "No dts match or id table match found\n");
return -ENODEV;
}
i2c_set_clientdata(client, pfuze_chip);
pfuze_chip->dev = &client->dev;
pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config);
if (IS_ERR(pfuze_chip->regmap)) {
ret = PTR_ERR(pfuze_chip->regmap);
dev_err(&client->dev,
"regmap allocation failed with err %d\n", ret);
return ret;
}
ret = pfuze_identify(pfuze_chip);
if (ret) {
dev_err(&client->dev, "unrecognized pfuze chip ID!\n");
return ret;
}
/* use the right regulators after identify the right device */
switch (pfuze_chip->chip_id) {
case PFUZE3001:
pfuze_chip->pfuze_regulators = pfuze3001_regulators;
regulator_num = ARRAY_SIZE(pfuze3001_regulators);
sw_check_start = PFUZE3001_SW2;
sw_check_end = PFUZE3001_SW2;
sw_hi = 1 << 3;
break;
case PFUZE3000:
pfuze_chip->pfuze_regulators = pfuze3000_regulators;
regulator_num = ARRAY_SIZE(pfuze3000_regulators);
sw_check_start = PFUZE3000_SW2;
sw_check_end = PFUZE3000_SW2;
sw_hi = 1 << 3;
break;
case PFUZE200:
pfuze_chip->pfuze_regulators = pfuze200_regulators;
regulator_num = ARRAY_SIZE(pfuze200_regulators);
sw_check_start = PFUZE200_SW2;
sw_check_end = PFUZE200_SW3B;
break;
case PFUZE100:
default:
pfuze_chip->pfuze_regulators = pfuze100_regulators;
regulator_num = ARRAY_SIZE(pfuze100_regulators);
sw_check_start = PFUZE100_SW2;
sw_check_end = PFUZE100_SW4;
break;
}
dev_info(&client->dev, "pfuze%s found.\n",
(pfuze_chip->chip_id == PFUZE100) ? "100" :
(((pfuze_chip->chip_id == PFUZE200) ? "200" :
((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001"))));
memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators,
regulator_num * sizeof(struct pfuze_regulator));
ret = pfuze_parse_regulators_dt(pfuze_chip);
if (ret)
return ret;
for (i = 0; i < regulator_num; i++) {
struct regulator_init_data *init_data;
struct regulator_desc *desc;
int val;
desc = &pfuze_chip->regulator_descs[i].desc;
init_data = match_init_data(i);
/* SW2~SW4 high bit check and modify the voltage value table */
if (i >= sw_check_start && i <= sw_check_end) {
ret = regmap_read(pfuze_chip->regmap,
desc->vsel_reg, &val);
if (ret) {
dev_err(&client->dev, "Fails to read from the register.\n");
return ret;
}
if (val & sw_hi) {
if (pfuze_chip->chip_id == PFUZE3000 ||
pfuze_chip->chip_id == PFUZE3001) {
desc->volt_table = pfuze3000_sw2hi;
desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi);
} else {
desc->min_uV = 800000;
desc->uV_step = 50000;
desc->n_voltages = 51;
}
}
}
/*
* Allow SW regulators to turn off. Checking it trough a flag is
* a workaround to keep the backward compatibility with existing
* old dtb's which may relay on the fact that we didn't disable
* the switched regulator till yet.
*/
if (pfuze_chip->flags & PFUZE_FLAG_DISABLE_SW) {
if (pfuze_chip->chip_id == PFUZE100 ||
pfuze_chip->chip_id == PFUZE200) {
if (pfuze_chip->regulator_descs[i].sw_reg) {
desc->ops = &pfuze100_sw_disable_regulator_ops;
desc->enable_val = 0x8;
desc->disable_val = 0x0;
desc->enable_time = 500;
}
}
}
config.dev = &client->dev;
config.init_data = init_data;
config.driver_data = pfuze_chip;
config.of_node = match_of_node(i);
pfuze_chip->regulators[i] =
devm_regulator_register(&client->dev, desc, &config);
if (IS_ERR(pfuze_chip->regulators[i])) {
dev_err(&client->dev, "register regulator%s failed\n",
pfuze_chip->pfuze_regulators[i].desc.name);
return PTR_ERR(pfuze_chip->regulators[i]);
}
}
if (of_property_read_bool(client->dev.of_node,
"fsl,pmic-stby-poweroff"))
return pfuze_power_off_prepare_init(pfuze_chip);
return 0;
}
static struct i2c_driver pfuze_driver = {
.driver = {
.name = "pfuze100-regulator",
regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14 Probing of regulators can be a slow operation and can contribute to slower boot times. This is especially true if a regulator is turned on at probe time (with regulator-boot-on or regulator-always-on) and the regulator requires delays (off-on-time, ramp time, etc). While the overall kernel is not ready to switch to async probe by default, as per the discussion on the mailing lists [1] it is believed that the regulator subsystem is in good shape and we can move regulator drivers over wholesale. There is no way to just magically opt in all regulators (regulators are just normal drivers like platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all regulators found in 'drivers/regulator' individually. Given the number of drivers touched and the impossibility to test this ahead of time, it wouldn't be shocking at all if this caused a regression for someone. If there is a regression caused by this patch, it's likely to be one of the cases talked about in [1]. As a "quick fix", drivers involved in the regression could be fixed by changing them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix would be to directly fix the problem that caused the issue with async probe. The approach here follows a similar approach that was used for the mmc subsystem several years ago [2]. In fact, I ran nearly the same python script to auto-generate the changes. The only thing I changed was to search for "i2c_driver", "spmi_driver", and "spi_driver" in addition to "platform_driver". [1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk [2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/ Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-17 03:54:38 +08:00
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = pfuze_dt_ids,
},
.probe = pfuze100_regulator_probe,
};
module_i2c_driver(pfuze_driver);
MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000/3001 PMIC");
MODULE_LICENSE("GPL v2");