linux/drivers/leds/leds-gpio.c

300 lines
7.4 KiB
C
Raw Normal View History

/*
* LEDs driver for GPIOs
*
* Copyright (C) 2007 8D Technologies inc.
* Raphael Assenat <raph@8d.com>
* Copyright (C) 2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/property.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/workqueue.h>
struct gpio_led_data {
struct led_classdev cdev;
struct gpio_desc *gpiod;
struct work_struct work;
u8 new_level;
u8 can_sleep;
u8 blinking;
int (*platform_gpio_blink_set)(unsigned gpio, int state,
unsigned long *delay_on, unsigned long *delay_off);
};
static void gpio_led_work(struct work_struct *work)
{
struct gpio_led_data *led_dat =
container_of(work, struct gpio_led_data, work);
if (led_dat->blinking) {
int gpio = desc_to_gpio(led_dat->gpiod);
int level = led_dat->new_level;
if (gpiod_is_active_low(led_dat->gpiod))
level = !level;
led_dat->platform_gpio_blink_set(gpio, level, NULL, NULL);
led_dat->blinking = 0;
} else
gpiod_set_value_cansleep(led_dat->gpiod, led_dat->new_level);
}
static void gpio_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct gpio_led_data *led_dat =
container_of(led_cdev, struct gpio_led_data, cdev);
int level;
if (value == LED_OFF)
level = 0;
else
level = 1;
/* Setting GPIOs with I2C/etc requires a task context, and we don't
* seem to have a reliable way to know if we're already in one; so
* let's just assume the worst.
*/
if (led_dat->can_sleep) {
led_dat->new_level = level;
schedule_work(&led_dat->work);
} else {
if (led_dat->blinking) {
int gpio = desc_to_gpio(led_dat->gpiod);
if (gpiod_is_active_low(led_dat->gpiod))
level = !level;
led_dat->platform_gpio_blink_set(gpio, level, NULL,
NULL);
led_dat->blinking = 0;
} else
gpiod_set_value(led_dat->gpiod, level);
}
}
static int gpio_blink_set(struct led_classdev *led_cdev,
unsigned long *delay_on, unsigned long *delay_off)
{
struct gpio_led_data *led_dat =
container_of(led_cdev, struct gpio_led_data, cdev);
int gpio = desc_to_gpio(led_dat->gpiod);
led_dat->blinking = 1;
return led_dat->platform_gpio_blink_set(gpio, GPIO_LED_BLINK,
delay_on, delay_off);
}
static int create_gpio_led(const struct gpio_led *template,
struct gpio_led_data *led_dat, struct device *parent,
int (*blink_set)(unsigned, int, unsigned long *, unsigned long *))
{
leds: Add options to have GPIO LEDs start on or keep their state There already is a "default-on" trigger but there are problems with it. For one, it's a inefficient way to do it and requires led trigger support to be compiled in. But the real reason is that is produces a glitch on the LED. The GPIO is allocate with the LED *off*, then *later* when the trigger runs it is turned back on. If the LED was already on via the GPIO's reset default or action of the firmware, this produces a glitch where the LED goes from on to off to on. While normally this is fast enough that it wouldn't be noticeable to a human observer, there are still serious problems. One is that there may be something else on the GPIO line, like a hardware alarm or watchdog, that is fast enough to notice the glitch. Another is that the kernel may panic before the LED is turned back on, thus hanging with the LED in the wrong state. This is not just speculation, but actually happened to me with an embedded system that has an LED which should turn off when the kernel finishes booting, which was left in the incorrect state due to a bug in the OF LED binding code. We also let GPIO LEDs get their initial value from whatever the current state of the GPIO line is. On some systems the LEDs are put into some state by the firmware or hardware before Linux boots, and it is desired to have them keep this state which is otherwise unknown to Linux. This requires that the underlying GPIO driver support reading the value of output GPIOs. Some drivers support this and some do not. The platform device binding gains a field in the platform data "default_state" that controls this. There are three constants defined to select from on, off, or keeping the current state. The OpenFirmware binding uses a property named "default-state" that can be set to "on", "off", or "keep". The default if the property isn't present is off. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-05-13 06:33:12 +08:00
int ret, state;
if (!template->gpiod) {
unsigned long flags = 0;
/* skip leds that aren't available */
if (!gpio_is_valid(template->gpio)) {
dev_info(parent, "Skipping unavailable LED gpio %d (%s)\n",
template->gpio, template->name);
return 0;
}
if (template->active_low)
flags |= GPIOF_ACTIVE_LOW;
ret = devm_gpio_request_one(parent, template->gpio, flags,
template->name);
if (ret < 0)
return ret;
led_dat->gpiod = gpio_to_desc(template->gpio);
if (IS_ERR(led_dat->gpiod))
return PTR_ERR(led_dat->gpiod);
}
leds: leds-gpio: reserve gpio before using it This reverts commit a99d76f (leds: leds-gpio: use gpio_request_one) and commit 2d7c22f (leds: leds-gpio: set devm_gpio_request_one() flags param correctly) which was a fix of the first one. The conversion to devm_gpio_request in commit e3b1d44c (leds: leds-gpio: use devm_gpio_request_one) is not reverted. The problem is that gpio_cansleep() and gpio_get_value_cansleep() calls can crash if the gpio is not first reserved. Incidentally this same bug existed earlier and was fixed similarly in commit d95cbe61 (leds: Fix potential leds-gpio oops). But the OOPS is real. It happens when GPIOs are provided by module which is not yet loaded. So this fixes the following BUG during my ALIX boot (3.9.2-vanilla): BUG: unable to handle kernel NULL pointer dereference at 0000004c IP: [<c11287d6>] __gpio_cansleep+0xe/0x1a *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: leds_gpio(+) via_rhine mii cs5535_mfd mfd_core geode_rng rng_core geode_aes isofs nls_utf8 nls_cp437 vfat fat ata_generic pata_amd pata_cs5536 pata_acpi libata ehci_pci ehci_hcd ohci_hcd usb_storage usbcore usb_common sd_mod scsi_mod squashfs loop Pid: 881, comm: modprobe Not tainted 3.9.2 #1-Alpine EIP: 0060:[<c11287d6>] EFLAGS: 00010282 CPU: 0 EIP is at __gpio_cansleep+0xe/0x1a EAX: 00000000 EBX: cf364018 ECX: c132b8b9 EDX: 00000000 ESI: c13993a4 EDI: c1399370 EBP: cded9dbc ESP: cded9dbc DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: 0000004c CR3: 0f0c4000 CR4: 00000090 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process modprobe (pid: 881, ti=cded8000 task=cf094aa0 task.ti=cded8000) Stack: cded9de0 d09471cb 00000000 c1399260 cf364014 00000000 c1399260 c1399254 d0949014 cded9df4 c118cd59 c1399260 d0949014 d0949014 cded9e08 c118ba47 c1399260 d0949014 c1399294 cded9e1c c118bb75 cded9e24 d0949014 00000000 Call Trace: [<d09471cb>] gpio_led_probe+0xba/0x203 [leds_gpio] [<c118cd59>] platform_drv_probe+0x26/0x48 [<c118ba47>] driver_probe_device+0x75/0x15c [<c118bb75>] __driver_attach+0x47/0x63 [<c118a727>] bus_for_each_dev+0x3c/0x66 [<c118b6f9>] driver_attach+0x14/0x16 [<c118bb2e>] ? driver_probe_device+0x15c/0x15c [<c118b3d5>] bus_add_driver+0xbd/0x1bc [<d08b4000>] ? 0xd08b3fff [<d08b4000>] ? 0xd08b3fff [<c118bffc>] driver_register+0x74/0xec [<d08b4000>] ? 0xd08b3fff [<c118c8e8>] platform_driver_register+0x38/0x3a [<d08b400d>] gpio_led_driver_init+0xd/0x1000 [leds_gpio] [<c100116c>] do_one_initcall+0x6b/0x10f [<d08b4000>] ? 0xd08b3fff [<c105e918>] load_module+0x1631/0x1907 [<c10975d6>] ? insert_vmalloc_vmlist+0x14/0x43 [<c1098d5b>] ? __vmalloc_node_range+0x13e/0x15f [<c105ec50>] sys_init_module+0x62/0x77 [<c1257888>] syscall_call+0x7/0xb EIP: [<c11287d6>] __gpio_cansleep+0xe/0x1a SS:ESP 0068:cded9dbc CR2: 000000000000004c ---[ end trace 5308fb20d2514822 ]--- Signed-off-by: Timo Teräs <timo.teras@iki.f> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Raphael Assenat <raph@8d.com> Cc: Trent Piepho <tpiepho@freescale.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-05-17 15:48:39 +08:00
led_dat->cdev.name = template->name;
led_dat->cdev.default_trigger = template->default_trigger;
led_dat->gpiod = template->gpiod;
led_dat->can_sleep = gpiod_cansleep(template->gpiod);
led_dat->blinking = 0;
if (blink_set) {
led_dat->platform_gpio_blink_set = blink_set;
led_dat->cdev.blink_set = gpio_blink_set;
}
led_dat->cdev.brightness_set = gpio_led_set;
leds: Add options to have GPIO LEDs start on or keep their state There already is a "default-on" trigger but there are problems with it. For one, it's a inefficient way to do it and requires led trigger support to be compiled in. But the real reason is that is produces a glitch on the LED. The GPIO is allocate with the LED *off*, then *later* when the trigger runs it is turned back on. If the LED was already on via the GPIO's reset default or action of the firmware, this produces a glitch where the LED goes from on to off to on. While normally this is fast enough that it wouldn't be noticeable to a human observer, there are still serious problems. One is that there may be something else on the GPIO line, like a hardware alarm or watchdog, that is fast enough to notice the glitch. Another is that the kernel may panic before the LED is turned back on, thus hanging with the LED in the wrong state. This is not just speculation, but actually happened to me with an embedded system that has an LED which should turn off when the kernel finishes booting, which was left in the incorrect state due to a bug in the OF LED binding code. We also let GPIO LEDs get their initial value from whatever the current state of the GPIO line is. On some systems the LEDs are put into some state by the firmware or hardware before Linux boots, and it is desired to have them keep this state which is otherwise unknown to Linux. This requires that the underlying GPIO driver support reading the value of output GPIOs. Some drivers support this and some do not. The platform device binding gains a field in the platform data "default_state" that controls this. There are three constants defined to select from on, off, or keeping the current state. The OpenFirmware binding uses a property named "default-state" that can be set to "on", "off", or "keep". The default if the property isn't present is off. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-05-13 06:33:12 +08:00
if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
state = !!gpiod_get_value_cansleep(led_dat->gpiod);
leds: Add options to have GPIO LEDs start on or keep their state There already is a "default-on" trigger but there are problems with it. For one, it's a inefficient way to do it and requires led trigger support to be compiled in. But the real reason is that is produces a glitch on the LED. The GPIO is allocate with the LED *off*, then *later* when the trigger runs it is turned back on. If the LED was already on via the GPIO's reset default or action of the firmware, this produces a glitch where the LED goes from on to off to on. While normally this is fast enough that it wouldn't be noticeable to a human observer, there are still serious problems. One is that there may be something else on the GPIO line, like a hardware alarm or watchdog, that is fast enough to notice the glitch. Another is that the kernel may panic before the LED is turned back on, thus hanging with the LED in the wrong state. This is not just speculation, but actually happened to me with an embedded system that has an LED which should turn off when the kernel finishes booting, which was left in the incorrect state due to a bug in the OF LED binding code. We also let GPIO LEDs get their initial value from whatever the current state of the GPIO line is. On some systems the LEDs are put into some state by the firmware or hardware before Linux boots, and it is desired to have them keep this state which is otherwise unknown to Linux. This requires that the underlying GPIO driver support reading the value of output GPIOs. Some drivers support this and some do not. The platform device binding gains a field in the platform data "default_state" that controls this. There are three constants defined to select from on, off, or keeping the current state. The OpenFirmware binding uses a property named "default-state" that can be set to "on", "off", or "keep". The default if the property isn't present is off. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-05-13 06:33:12 +08:00
else
state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
if (!template->retain_state_suspended)
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
ret = gpiod_direction_output(led_dat->gpiod, state);
if (ret < 0)
return ret;
INIT_WORK(&led_dat->work, gpio_led_work);
return led_classdev_register(parent, &led_dat->cdev);
}
static void delete_gpio_led(struct gpio_led_data *led)
{
led_classdev_unregister(&led->cdev);
cancel_work_sync(&led->work);
}
struct gpio_leds_priv {
int num_leds;
struct gpio_led_data leds[];
};
static inline int sizeof_gpio_leds_priv(int num_leds)
{
return sizeof(struct gpio_leds_priv) +
(sizeof(struct gpio_led_data) * num_leds);
}
static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct fwnode_handle *child;
struct gpio_leds_priv *priv;
int count, ret;
count = device_get_child_node_count(dev);
if (!count)
return ERR_PTR(-ENODEV);
priv = devm_kzalloc(dev, sizeof_gpio_leds_priv(count), GFP_KERNEL);
if (!priv)
return ERR_PTR(-ENOMEM);
device_for_each_child_node(dev, child) {
struct gpio_led led = {};
const char *state = NULL;
led.gpiod = devm_get_gpiod_from_child(dev, child);
if (IS_ERR(led.gpiod)) {
fwnode_handle_put(child);
goto err;
}
fwnode_property_read_string(child, "label", &led.name);
fwnode_property_read_string(child, "linux,default-trigger",
&led.default_trigger);
if (!fwnode_property_read_string(child, "linux,default_state",
&state)) {
leds: Add options to have GPIO LEDs start on or keep their state There already is a "default-on" trigger but there are problems with it. For one, it's a inefficient way to do it and requires led trigger support to be compiled in. But the real reason is that is produces a glitch on the LED. The GPIO is allocate with the LED *off*, then *later* when the trigger runs it is turned back on. If the LED was already on via the GPIO's reset default or action of the firmware, this produces a glitch where the LED goes from on to off to on. While normally this is fast enough that it wouldn't be noticeable to a human observer, there are still serious problems. One is that there may be something else on the GPIO line, like a hardware alarm or watchdog, that is fast enough to notice the glitch. Another is that the kernel may panic before the LED is turned back on, thus hanging with the LED in the wrong state. This is not just speculation, but actually happened to me with an embedded system that has an LED which should turn off when the kernel finishes booting, which was left in the incorrect state due to a bug in the OF LED binding code. We also let GPIO LEDs get their initial value from whatever the current state of the GPIO line is. On some systems the LEDs are put into some state by the firmware or hardware before Linux boots, and it is desired to have them keep this state which is otherwise unknown to Linux. This requires that the underlying GPIO driver support reading the value of output GPIOs. Some drivers support this and some do not. The platform device binding gains a field in the platform data "default_state" that controls this. There are three constants defined to select from on, off, or keeping the current state. The OpenFirmware binding uses a property named "default-state" that can be set to "on", "off", or "keep". The default if the property isn't present is off. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-05-13 06:33:12 +08:00
if (!strcmp(state, "keep"))
led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
else if (!strcmp(state, "on"))
leds: Add options to have GPIO LEDs start on or keep their state There already is a "default-on" trigger but there are problems with it. For one, it's a inefficient way to do it and requires led trigger support to be compiled in. But the real reason is that is produces a glitch on the LED. The GPIO is allocate with the LED *off*, then *later* when the trigger runs it is turned back on. If the LED was already on via the GPIO's reset default or action of the firmware, this produces a glitch where the LED goes from on to off to on. While normally this is fast enough that it wouldn't be noticeable to a human observer, there are still serious problems. One is that there may be something else on the GPIO line, like a hardware alarm or watchdog, that is fast enough to notice the glitch. Another is that the kernel may panic before the LED is turned back on, thus hanging with the LED in the wrong state. This is not just speculation, but actually happened to me with an embedded system that has an LED which should turn off when the kernel finishes booting, which was left in the incorrect state due to a bug in the OF LED binding code. We also let GPIO LEDs get their initial value from whatever the current state of the GPIO line is. On some systems the LEDs are put into some state by the firmware or hardware before Linux boots, and it is desired to have them keep this state which is otherwise unknown to Linux. This requires that the underlying GPIO driver support reading the value of output GPIOs. Some drivers support this and some do not. The platform device binding gains a field in the platform data "default_state" that controls this. There are three constants defined to select from on, off, or keeping the current state. The OpenFirmware binding uses a property named "default-state" that can be set to "on", "off", or "keep". The default if the property isn't present is off. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-05-13 06:33:12 +08:00
led.default_state = LEDS_GPIO_DEFSTATE_ON;
else
led.default_state = LEDS_GPIO_DEFSTATE_OFF;
}
if (fwnode_property_present(child, "retain-state-suspended"))
led.retain_state_suspended = 1;
ret = create_gpio_led(&led, &priv->leds[priv->num_leds++],
dev, NULL);
if (ret < 0) {
fwnode_handle_put(child);
goto err;
}
}
return priv;
err:
for (count = priv->num_leds - 2; count >= 0; count--)
delete_gpio_led(&priv->leds[count]);
return ERR_PTR(-ENODEV);
}
static const struct of_device_id of_gpio_leds_match[] = {
{ .compatible = "gpio-leds", },
{},
};
MODULE_DEVICE_TABLE(of, of_gpio_leds_match);
static int gpio_led_probe(struct platform_device *pdev)
{
struct gpio_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct gpio_leds_priv *priv;
int i, ret = 0;
if (pdata && pdata->num_leds) {
priv = devm_kzalloc(&pdev->dev,
sizeof_gpio_leds_priv(pdata->num_leds),
GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->num_leds = pdata->num_leds;
for (i = 0; i < priv->num_leds; i++) {
ret = create_gpio_led(&pdata->leds[i],
&priv->leds[i],
&pdev->dev, pdata->gpio_blink_set);
if (ret < 0) {
/* On failure: unwind the led creations */
for (i = i - 1; i >= 0; i--)
delete_gpio_led(&priv->leds[i]);
return ret;
}
}
} else {
priv = gpio_leds_create(pdev);
if (IS_ERR(priv))
return PTR_ERR(priv);
}
platform_set_drvdata(pdev, priv);
return 0;
}
static int gpio_led_remove(struct platform_device *pdev)
{
struct gpio_leds_priv *priv = platform_get_drvdata(pdev);
int i;
for (i = 0; i < priv->num_leds; i++)
delete_gpio_led(&priv->leds[i]);
return 0;
}
static struct platform_driver gpio_led_driver = {
.probe = gpio_led_probe,
.remove = gpio_led_remove,
.driver = {
.name = "leds-gpio",
.owner = THIS_MODULE,
.of_match_table = of_gpio_leds_match,
},
};
module_platform_driver(gpio_led_driver);
MODULE_AUTHOR("Raphael Assenat <raph@8d.com>, Trent Piepho <tpiepho@freescale.com>");
MODULE_DESCRIPTION("GPIO LED driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:leds-gpio");